[ 0s] Using BUILD_ROOT=/srv/build/root_1/.mount [ 0s] Using BUILD_ARCH=armv7el [ 0s] Doing kvm build in /srv/build/root_1/root [ 0s] [ 0s] [ 0s] w11 started "build eeze.spec" at Thu Oct 10 22:42:06 UTC 2013. [ 0s] [ 0s] Building eeze for project 'Tizen:2.0:Panda' repository 'standard' arch 'armv7el' srcmd5 'e39f240818d3d61a8e0304c97f354a62' [ 0s] [ 0s] processing specfile /srv/build/root_1/.build-srcdir/eeze.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_1/.build-srcdir/eeze.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_1/.build.rpmlist /srv/build/root_1/.build-srcdir/eeze.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 41: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 44: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 45: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 48: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 51: echo: write error: Invalid argument [ 0s] Please check cpu value and header information for m68k! [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 55: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 59: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 60: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 61: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 62: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 63: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 64: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 67: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 68: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 71: echo: write error: Invalid argument [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc-common -> eglibc [ 1s] cycle: libgcc -> eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: libgcc -> eglibc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: rpm-libs -> rpm [ 1s] breaking dependency rpm -> rpm-libs [ 1s] [1/56] preinstalling libgcc... [ 1s] [2/56] preinstalling setup... [ 1s] [3/56] preinstalling filesystem... [ 1s] [4/56] preinstalling eglibc... [ 1s] [5/56] preinstalling eglibc-common... [ 1s] [6/56] preinstalling bash... [ 1s] [7/56] preinstalling bzip2-libs... [ 2s] [8/56] preinstalling diffutils... [ 2s] [9/56] preinstalling elfutils-libelf... [ 2s] [10/56] preinstalling libattr... [ 2s] [11/56] preinstalling liblua... [ 2s] [12/56] preinstalling libstdc++... [ 2s] [13/56] preinstalling ncurses-libs... [ 2s] [14/56] preinstalling nspr... [ 2s] [15/56] preinstalling nss-softokn-freebl... [ 2s] [16/56] preinstalling popt... [ 2s] [17/56] preinstalling readline... [ 2s] [18/56] preinstalling sed... [ 2s] [19/56] preinstalling sqlite... [ 2s] [20/56] preinstalling xz-libs... [ 2s] [21/56] preinstalling zlib... [ 2s] [22/56] preinstalling qemu.x86_64... [ 2s] [23/56] preinstalling libcap... [ 2s] [24/56] preinstalling libacl... [ 2s] [25/56] preinstalling libfile... [ 2s] [26/56] preinstalling bzip2... [ 2s] [27/56] preinstalling nss... [ 2s] [28/56] preinstalling tar... [ 2s] [29/56] preinstalling coreutils... [ 2s] [30/56] preinstalling file... [ 2s] [31/56] preinstalling rpm... [ 2s] [32/56] preinstalling tizen-accelerator... [ 2s] [33/56] preinstalling rpm-libs... [ 3s] [34/56] preinstalling gmp-x86-arm... [ 3s] [35/56] preinstalling mpc-x86-arm... [ 3s] [36/56] preinstalling mpfr-x86-arm... [ 3s] [37/56] preinstalling bzip2-libs-x86-arm... [ 3s] [38/56] preinstalling eglibc-x86-arm... [ 3s] [39/56] preinstalling elfutils-libelf-x86-arm... [ 3s] [40/56] preinstalling libacl-x86-arm... [ 3s] [41/56] preinstalling libattr-x86-arm... [ 3s] [42/56] preinstalling libcap-x86-arm... [ 3s] [43/56] preinstalling libfile-x86-arm... [ 3s] [44/56] preinstalling libgcc-x86-arm... [ 3s] [45/56] preinstalling liblua-x86-arm... [ 3s] [46/56] preinstalling ncurses-libs-x86-arm... [ 3s] [47/56] preinstalling nspr-x86-arm... [ 3s] [48/56] preinstalling nss-softokn-freebl-x86-arm... [ 3s] [49/56] preinstalling nss-x86-arm... [ 3s] [50/56] preinstalling popt-x86-arm... [ 3s] [51/56] preinstalling rpm-libs-x86-arm... [ 3s] [52/56] preinstalling sqlite-x86-arm... [ 3s] [53/56] preinstalling xz-libs-x86-arm... [ 3s] [54/56] preinstalling zlib-x86-arm... [ 3s] [55/56] preinstalling bash-x86-arm... [ 3s] [56/56] preinstalling rpm-x86-arm... [ 3s] [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl-libs -> perl [ 3s] [1/8] preinstalling e2fsprogs-libs... [ 3s] [2/8] preinstalling libpcre... [ 3s] [3/8] preinstalling libuuid... [ 3s] [4/8] preinstalling grep... [ 3s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 4s] copying packages... [ 4s] reordering...cycle: bash -> eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> bash [ 4s] cycle: eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> libgcc [ 4s] breaking dependency eglibc -> eglibc-common [ 4s] cycle: eglibc -> libgcc [ 4s] breaking dependency libgcc -> eglibc [ 4s] cycle: filesystem -> setup [ 4s] breaking dependency setup -> filesystem [ 4s] cycle: ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses [ 4s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses-base [ 4s] cycle: perl -> perl-libs [ 4s] breaking dependency perl -> perl-libs [ 4s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 4s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl -> perl-IO-Compress-Zlib [ 4s] breaking dependency perl -> perl-IO-Compress-Zlib [ 4s] cycle: perl -> perl-IO-Compress-Base [ 4s] breaking dependency perl -> perl-IO-Compress-Base [ 4s] cycle: perl -> perl-Module-Pluggable [ 4s] breaking dependency perl -> perl-Module-Pluggable [ 4s] cycle: perl -> perl-Pod-Simple [ 4s] breaking dependency perl -> perl-Pod-Simple [ 4s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 4s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 4s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 4s] cycle: nss -> nss-sysinit [ 4s] breaking dependency nss -> nss-sysinit [ 4s] cycle: perl-CPAN -> perl-Test-Harness [ 4s] breaking dependency perl-Test-Harness -> perl-CPAN [ 4s] cycle: rpm-libs -> rpm [ 4s] breaking dependency rpm -> rpm-libs [ 4s] done [ 6s] booting kvm ... [ 6s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/kernel/vmlinuz -initrd /srv/kernel/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8192 -drive file=/srv/build/root_1/root,if=virtio,cache=unsafe -drive file=/srv/build/root_1/root,if=ide,index=0,cache=unsafe -drive file=/srv/build/root_1/swap,if=virtio,cache=unsafe -smp 4 [ 7s]  [ 7s] Google, Inc. [ 7s] Serial Graphics Adapter 09/05/12 [ 7s] SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ (abuild@build24) Wed Sep 5 14:01:11 UTC 2012 [ 7s] Term: 80x24 [ 7s] 4 0 [ 7s]  SeaBIOS (version 1.6.3-20120905_140109) [ 7s] [ 7s] Booting from ROM... [ 10s] doing fast boot [ 10s] Creating device nodes with udev [ 10s] udevd[215]: failed to execute '/etc/sysconfig/network/scripts/ifup-sysctl' '/etc/sysconfig/network/scripts/ifup-sysctl lo -o hotplug': No such file or directory [ 10s] [ 10s] Waiting for device /dev/vda to appear: ok [ 10s] fsck from util-linux 2.20.1 [ 10s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 10s] /dev/vda: clean, 9515/2097152 files, 267323/8388608 blocks [ 10s] fsck succeeded. Mounting root device read-write. [ 10s] Mounting root /dev/vda [ 10s] mount -o rw,noatime,acl,user_xattr -t ext4 /dev/vda /root [ 10s] replacing /etc/mtab with symlink to /proc/self/mounts [ 10s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 11s] 2nd stage started in virtual machine [ 11s] machine type: armv7l [ 11s] switching personality to 8... [ 11s] 2nd stage started in virtual machine [ 11s] machine type: armv7l [ 11s] /.build/build: line 770: mount: command not found [ 11s] swapon on /dev/vdb [ 11s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 11s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 12s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 12s] logging output to //.build.log... [ 12s] processing specfile /.build-srcdir/eeze.spec ... [ 12s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/eeze.spec build rpmlint-Factory ... [ 12s] running rpm-x86-arm postinstall script [ 13s] running rpm-libs-x86-arm postinstall script [ 13s] running tizen-accelerator postinstall script [ 13s] running bash-x86-arm postinstall script [ 13s] initializing rpm db... [ 19s] [1/205] installing kernel-headers-2.6.36-5.1 [ 19s] [2/205] installing libX11-common-1.5.0-4.5 [ 19s] [3/205] installing opengl-es-virtual-drv-0.1.3-10.4 [ 19s] [4/205] installing tizen-release-2.0.0-2.4 [ 19s] [5/205] installing tzdata-2011h-4.2 [ 19s] [6/205] installing libgcc-4.5.3-5.1 [ 19s] [7/205] installing setup-0.1-5.1 [ 19s] [8/205] installing filesystem-0.1-5.1 [ 20s] warning: group lock does not exist - using root [ 20s] warning: group mail does not exist - using root [ 20s] [9/205] installing eglibc-2.13-5.1 [ 20s] [10/205] installing eglibc-common-2.13-5.1 [ 29s] [11/205] installing bash-4.1-6.3 [ 29s] [12/205] installing bzip2-libs-1.0.5-8.1 [ 29s] [13/205] installing cpio-2.8-7.1 [ 29s] [14/205] installing diffutils-3.0-6.2 [ 29s] [15/205] installing e2fsprogs-libs-1.41.11-3.3 [ 30s] [16/205] installing eina-1.7.1+svn.77445+build01r01-1.4 [ 30s] [17/205] installing elfutils-libelf-0.152-5.1 [ 30s] [18/205] installing expat-2.0.1-12.1 [ 30s] [19/205] installing fdupes-1.40-46.1 [ 30s] [20/205] installing findutils-4.2.31-5.1 [ 30s] [21/205] installing fribidi-0.19.5-7.4 [ 30s] [22/205] installing gdbm-1.8.3-5.1 [ 30s] [23/205] installing kmod-5-4.1 [ 30s] [24/205] installing libICE-1.0.8-3.5 [ 31s] [25/205] installing libXau-1.0.7-3.4 [ 31s] [26/205] installing libattr-2.4.44-12.4 [ 31s] [27/205] installing libffi-3.0.9-102.4 [ 31s] [28/205] installing libgomp-4.5.3-5.1 [ 31s] [29/205] installing libidn-1.15-9.4 [ 31s] [30/205] installing libjpeg-turbo-1.2.0-10.4 [ 31s] [31/205] installing liblua-5.1.4-9.3 [ 31s] [32/205] installing libstdc++-4.5.3-5.1 [ 31s] [33/205] installing libuuid-2.20.2-4.3 [ 31s] [34/205] installing lzo-2.03-5.1 [ 32s] [35/205] installing m4-1.4.14-5.1 [ 32s] [36/205] installing make-3.81-5.1 [ 32s] [37/205] installing net-tools-1.60-90.3 [ 32s] [38/205] installing nspr-4.8.7-4.4 [ 32s] [39/205] installing nss-softokn-freebl-3.12.9-6.4 [ 32s] [40/205] installing patch-2.6.1.169-5.1 [ 32s] [41/205] installing pixman-0.26.0-8.2 [ 32s] [42/205] installing pkgconfig-0.25-6.1 [ 32s] [43/205] installing popt-1.16-6.3 [ 32s] [44/205] installing readline-5.2-17.4 [ 33s] [45/205] installing sed-4.1.5-5.2 [ 33s] [46/205] installing smack-1.0slp2+s7-2.3 [ 33s] [47/205] installing sqlite-3.7.9-4.4 [ 33s] [48/205] installing xz-libs-5.0.3-4.3 [ 33s] [49/205] installing zlib-1.2.5-6.3 [ 33s] [50/205] installing ncurses-libs-5.7-7.4 [ 33s] [51/205] installing build-compare-2009.10.14-30.1 [ 33s] [52/205] installing libstdc++-devel-4.5.3-5.1 [ 33s] [53/205] installing qemu.x86_64-1.2-2.3 [ 35s] [54/205] installing eglibc-headers-2.13-5.1 [ 35s] [55/205] installing eina-devel-1.7.1+svn.77445+build01r01-1.4 [ 35s] [56/205] installing fribidi-devel-0.19.5-7.4 [ 48s] [57/205] installing libcap-2.21-4.3 [ 48s] [58/205] installing pixman-devel-0.26.0-8.2 [ 48s] [59/205] installing unzip-6.0-12.4 [ 48s] [60/205] installing zlib-devel-1.2.5-6.3 [ 48s] [61/205] installing c-ares-1.7.4-6.1 [ 48s] [62/205] installing freetype-2.4.9-3.4 [ 49s] [63/205] installing gmp-5.0.1-5.1 [ 49s] [64/205] installing libacl-2.2.49-4.3 [ 49s] [65/205] installing libfile-5.04-5.1 [ 49s] [66/205] installing libpcre-7.9-3.1 [ 49s] [67/205] installing libpng-1.2.50-3.4 [ 49s] [68/205] installing libxcb-1.8.1-3.5 [ 49s] [69/205] installing lzo-minilzo-2.03-5.1 [ 49s] [70/205] installing ncurses-5.7-7.4 [ 49s] [71/205] installing openssl-1.0.1c-4.4 [ 50s] [72/205] installing binutils-2.21.51.20110421-6.1 [ 50s] [73/205] installing bzip2-1.0.5-8.1 [ 50s] [74/205] installing glib2-2.32.3-7.5 [ 50s] [75/205] installing libSM-1.2.1-3.5 [ 50s] [76/205] installing libblkid-2.20.2-4.3 [ 50s] [77/205] installing libicu-4.8-3.4 [ 51s] [78/205] installing xz-5.0.3-4.3 [ 51s] [79/205] installing eet-1.7.1+svn.77495+build01r01-1.6 [ 51s] [80/205] installing elfutils-libs-0.152-5.1 [ 51s] [81/205] installing nss-3.12.9-6.4 [ 51s] [82/205] installing perl-5.12.1-63.1 [ 52s] [83/205] installing ncurses-base-5.7-7.4 [ 52s] [84/205] installing perl-HTML-Tagset-3.20-12.1 [ 52s] [85/205] installing perl-IO-Compress-Base-2.008-63.1 [ 52s] [86/205] installing perl-Module-Pluggable-3.60-63.1 [ 52s] [87/205] installing perl-Pod-Escapes-1.04-63.1 [ 52s] [88/205] installing perl-TimeDate-1.20-5.1 [ 52s] [89/205] installing eglibc-devel-2.13-5.1 [ 53s] [90/205] installing grep-2.5.1a-65.2 [ 53s] [91/205] installing lzo-devel-2.03-5.1 [ 53s] [92/205] installing mpfr-3.0.0-4.4 [ 53s] [93/205] installing perl-Compress-Raw-Zlib-2.008-63.1 [ 53s] [94/205] installing perl-devel-5.12.1-63.1 [ 53s] [95/205] installing perl-libs-5.12.1-63.1 [ 53s] [96/205] installing tar-1.17-7.1 [ 53s] [97/205] installing coreutils-6.9-13.1 [ 53s] [98/205] installing ecore-1.7.1+svn.77580+build01r01-1.4 [ 54s] [99/205] installing eet-devel-1.7.1+svn.77495+build01r01-1.6 [ 54s] [100/205] installing file-5.04-5.1 [ 54s] [101/205] installing freetype-devel-2.4.9-3.4 [ 54s] [102/205] installing libX11-1.5.0-4.5 [ 54s] [103/205] installing libmount-2.20.2-4.3 [ 54s] [104/205] installing xz-lzma-compat-5.0.3-4.3 [ 54s] [105/205] installing elfutils-0.152-5.1 [ 54s] [106/205] installing nss-sysinit-3.12.9-6.4 [ 54s] [107/205] installing libcurl-7.21.3-8.4 [ 55s] [108/205] installing udev-182-8.1 [ 55s] [109/205] installing perl-ExtUtils-ParseXS-2.18-63.1 [ 55s] [110/205] installing perl-Pod-Simple-3.07-63.1 [ 55s] [111/205] installing perl-Test-Simple-0.80-63.1 [ 55s] [112/205] installing tizen-accelerator-1.0.1-5.1 [ 55s] [113/205] installing libXcomposite-0.4.3-5.3 [ 55s] [114/205] installing libXext-1.3.1-3.3 [ 55s] [115/205] installing libXfixes-5.0-4.3 [ 55s] [116/205] installing libXrender-0.9.7-3.3 [ 56s] [117/205] installing libidn-devel-1.15-9.4 [ 56s] [118/205] installing libudev-182-8.1 [ 56s] [119/205] installing perl-IO-Compress-Zlib-2.008-63.1 [ 56s] [120/205] installing perl-Test-Harness-3.12-63.1 [ 56s] [121/205] installing gawk-3.1.5-4.4 [ 56s] [122/205] installing gzip-1.3.14-6.1 [ 56s] [123/205] installing mpc-0.9-5.4 [ 56s] [124/205] installing build-2011.01.10a-5.1 [ 56s] [125/205] installing ecore-imf-1.7.1+svn.77580+build01r01-1.4 [ 56s] [126/205] installing ecore-input-1.7.1+svn.77580+build01r01-1.4 [ 57s] [127/205] installing giflib-4.1.6-15.4 [ 57s] [128/205] installing curl-7.21.3-8.4 [ 57s] [129/205] installing ecore-con-1.7.1+svn.77580+build01r01-1.4 [ 57s] [130/205] installing util-linux-2.20.2-4.3 [ 57s] warning: group tty does not exist - using root [ 57s] /bin/chown: `root:root': invalid user [ 57s] [131/205] installing fontconfig-2.9.0-4.5 [ 59s] [132/205] installing glib2-devel-2.32.3-7.5 [ 60s] [133/205] installing bzip2-libs-x86-arm-1.0.5-8.4 [ 60s] [134/205] installing eglibc-x86-arm-2.13-8.5 [ 60s] [135/205] installing elfutils-libelf-x86-arm-0.152-8.4 [ 60s] [136/205] installing elfutils-libs-x86-arm-0.152-8.7 [ 61s] [137/205] installing fontconfig-devel-2.9.0-4.5 [ 61s] [138/205] installing gmp-x86-arm-5.0.1-8.4 [ 61s] [139/205] installing libacl-x86-arm-2.2.49-8.4 [ 61s] [140/205] installing libattr-x86-arm-2.4.44-8.4 [ 61s] [141/205] installing libcap-x86-arm-2.21-8.4 [ 61s] [142/205] installing libfile-x86-arm-5.04-8.4 [ 62s] [143/205] installing libgcc-x86-arm-4.5.3-8.4 [ 62s] [144/205] installing liblua-x86-arm-5.1.4-8.4 [ 62s] [145/205] installing libudev-devel-182-8.1 [ 62s] [146/205] installing mpc-x86-arm-0.9-8.4 [ 62s] [147/205] installing mpfr-x86-arm-3.0.0-8.4 [ 62s] [148/205] installing ncurses-libs-x86-arm-5.7-8.4 [ 63s] [149/205] installing nspr-x86-arm-4.8.7-8.7 [ 63s] [150/205] installing nss-softokn-freebl-x86-arm-3.12.9-8.7 [ 63s] [151/205] installing nss-x86-arm-3.12.9-8.7 [ 63s] [152/205] installing perl-ExtUtils-MakeMaker-6.36-63.1 [ 63s] [153/205] installing popt-x86-arm-1.16-8.4 [ 63s] [154/205] installing sqlite-x86-arm-3.7.13-8.4 [ 64s] [155/205] installing xz-libs-x86-arm-5.0.3-8.4 [ 64s] [156/205] installing zlib-x86-arm-1.2.5-8.4 [ 64s] [157/205] installing libXdamage-1.1.3-5.3 [ 64s] [158/205] installing libXgesture-0.1.0-3.3 [ 64s] [159/205] installing libXi-1.6.1-3.3 [ 64s] [160/205] installing libXinerama-1.1.2-3.2 [ 64s] [161/205] installing libcurl-devel-7.21.3-8.4 [ 64s] [162/205] installing libXcursor-1.1.13-3.3 [ 65s] [163/205] installing libXrandr-1.4.0-5.3 [ 65s] [164/205] installing ecore-fb-1.7.1+svn.77580+build01r01-1.4 [ 65s] [165/205] installing cpp-4.5.3-5.1 [ 65s] [166/205] installing ecore-file-1.7.1+svn.77580+build01r01-1.4 [ 65s] [167/205] installing ecore-ipc-1.7.1+svn.77580+build01r01-1.4 [ 65s] [168/205] installing cairo-1.12.8-6.3 [ 65s] [169/205] installing rpm-4.9.1-7.4 [ 66s] [170/205] installing perl-CPAN-1.9205-63.1 [ 66s] [171/205] installing bash-x86-arm-4.1-8.2 [ 66s] [172/205] installing fdupes-x86-arm-1.40-8.4 [ 66s] [173/205] installing findutils-x86-arm-4.2.31-8.4 [ 66s] [174/205] installing gawk-x86-arm-3.1.5-8.4 [ 67s] [175/205] installing gzip-x86-arm-1.3.14-8.4 [ 67s] [176/205] installing make-x86-arm-3.81-8.4 [ 67s] [177/205] installing patch-x86-arm-2.6.1.169-8.2 [ 67s] [178/205] installing sed-x86-arm-4.1.5-8.4 [ 67s] [179/205] installing diffutils-x86-arm-3.0-8.4 [ 67s] [180/205] installing libXtst-1.2.0-5.3 [ 68s] [181/205] installing autoconf-2.68-5.1 [ 68s] [182/205] installing coreutils-x86-arm-6.9-8.4 [ 70s] [183/205] installing file-x86-arm-5.04-8.4 [ 70s] [184/205] installing tar-x86-arm-1.17-8.4 [ 70s] [185/205] installing harfbuzz-0.9.7-4.4 [ 71s] [186/205] installing elfutils-x86-arm-0.152-8.7 [ 71s] [187/205] installing gcc-4.5.3-5.1 [ 71s] [188/205] installing rpm-libs-4.9.1-7.4 [ 71s] [189/205] installing harfbuzz-devel-0.9.7-4.4 [ 71s] [190/205] installing rpm-libs-x86-arm-4.9.1-8.4 [ 71s] [191/205] installing automake-1.11.1-7.1 [ 71s] [192/205] installing gcc-c++-4.5.3-5.1 [ 72s] [193/205] installing evas-1.7.1+svn.77561+build01r01-1.6 [ 72s] [194/205] installing ecore-x-1.7.1+svn.77580+build01r01-1.4 [ 72s] [195/205] installing rpm-build-4.9.1-7.4 [ 72s] [196/205] installing libtool-2.2.6b-4.4 [ 72s] [197/205] installing ecore-imf-evas-1.7.1+svn.77580+build01r01-1.4 [ 72s] [198/205] installing ecore-input-evas-1.7.1+svn.77580+build01r01-1.4 [ 72s] [199/205] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.2 [ 73s] "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " [ 73s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 73s] cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory [ 73s] cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [ 73s] [200/205] installing evas-devel-1.7.1+svn.77561+build01r01-1.6 [ 73s] [201/205] installing rpm-x86-arm-4.9.1-8.4 [ 73s] /bin/rpm.orig-arm already present - skipping. [ 73s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 73s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 73s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 73s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 73s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 73s] [202/205] installing rpm-build-x86-arm-4.9.1-8.4 [ 74s] [203/205] installing cross-armv7l-binutils-accel-armv7l-2.22-1.3 [ 74s] mv: cannot stat `/usr/bin/gprov': No such file or directory [ 74s] [204/205] installing ecore-evas-1.7.1+svn.77580+build01r01-1.4 [ 74s] [205/205] installing ecore-devel-1.7.1+svn.77580+build01r01-1.4 [ 74s] now finalizing build dir... [ 75s] /.build/build: line 2585: mount: command not found [ 75s] /.build/build: line 2586: mount: command not found [ 75s] /.build/build: line 2680: //etc/passwd: No such file or directory [ 77s] build target is armv7l-tizen-linux [ 77s] ----------------------------------------------------------------- [ 77s] I have the following modifications for eeze.spec: [ 77s] 7c7 [ 77s] < Release: 1 [ 77s] --- [ 77s] > Release: 1.4 [ 77s] ----------------------------------------------------------------- [ 77s] ----- building eeze.spec (user abuild) [ 77s] ----------------------------------------------------------------- [ 77s] ----------------------------------------------------------------- [ 78s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://w11.vlan200.tizen.org/Tizen:2.0:Panda/standard/e39f240818d3d61a8e0304c97f354a62-eeze' /home/abuild/rpmbuild/SOURCES/eeze.spec [ 78s] Building target platforms: armv7l-tizen-linux [ 78s] Building for target armv7l-tizen-linux [ 78s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.I8YNIl [ 78s] + umask 022 [ 78s] + cd /home/abuild/rpmbuild/BUILD [ 78s] + LANG=C [ 78s] + export LANG [ 78s] + unset DISPLAY [ 78s] + cd /home/abuild/rpmbuild/BUILD [ 78s] + rm -rf eeze-1.7.0+svn.77318+build01r01 [ 78s] + /bin/tar -xf - [ 78s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/eeze-1.7.0+svn.77318+build01r01.tar.gz [ 78s] + STATUS=0 [ 78s] + '[' 0 -ne 0 ']' [ 78s] + cd eeze-1.7.0+svn.77318+build01r01 [ 78s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 78s] + exit 0 [ 78s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.9poqbJ [ 78s] + umask 022 [ 78s] + cd /home/abuild/rpmbuild/BUILD [ 78s] + cd eeze-1.7.0+svn.77318+build01r01 [ 78s] + LANG=C [ 78s] + export LANG [ 78s] + unset DISPLAY [ 78s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 78s] + export CFLAGS [ 78s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 78s] + export CXXFLAGS [ 78s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 78s] + export FFLAGS [ 78s] + LD_AS_NEEDED=1 [ 78s] + export LD_AS_NEEDED [ 78s] + export 'CFLAGS+= -fPIC -Wall' [ 78s] + CFLAGS+=' -fPIC -Wall' [ 78s] + export 'LDFLAGS+= -Wl,--hash-style=both -Wl,--as-needed' [ 78s] + LDFLAGS+=' -Wl,--hash-style=both -Wl,--as-needed' [ 78s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -fPIC -Wall' [ 78s] + export CFLAGS [ 78s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 78s] + export CXXFLAGS [ 78s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 78s] + export FFLAGS [ 78s] + ./autogen.sh --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info [ 78s] Running aclocal... [ 89s] sh: svnversion: command not found [ 94s] Running autoheader... [ 96s] sh: svnversion: command not found [ 101s] Running autoconf... [ 108s] Running libtoolize... [ 108s] Running automake... [ 112s] configure.ac:66: installing `./compile' [ 112s] configure.ac:37: installing `./config.guess' [ 112s] configure.ac:37: installing `./config.sub' [ 112s] configure.ac:32: installing `./install-sh' [ 112s] configure.ac:32: installing `./missing' [ 112s] doc/Makefile.am:33: wildcard img/*.*: non-POSIX variable name [ 112s] doc/Makefile.am:33: (probably a GNU make extension) [ 114s] src/bin/Makefile.am: installing `./depcomp' [ 119s] cmp: config.cache-env: No such file or directory [ 119s] Cleaning configure cache... [ 119s] configure: creating cache config.cache [ 119s] checking for a BSD-compatible install... /usr/bin/install -c [ 120s] checking whether build environment is sane... yes [ 120s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 120s] checking for gawk... gawk [ 120s] checking whether make sets $(MAKE)... yes [ 120s] checking build system type... armv7l-unknown-linux-gnueabi [ 120s] checking host system type... armv7l-unknown-linux-gnueabi [ 120s] checking for style of include used by make... GNU [ 120s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 120s] checking for gcc... gcc [ 120s] checking whether the C compiler works... yes [ 120s] checking for C compiler default output file name... a.out [ 120s] checking for suffix of executables... [ 120s] checking whether we are cross compiling... no [ 120s] checking for suffix of object files... o [ 120s] checking whether we are using the GNU C compiler... yes [ 120s] checking whether gcc accepts -g... yes [ 120s] checking for gcc option to accept ISO C89... none needed [ 120s] checking dependency style of gcc... gcc3 [ 120s] checking for a sed that does not truncate output... /bin/sed [ 120s] checking for grep that handles long lines and -e... /bin/grep [ 120s] checking for egrep... /bin/grep -E [ 120s] checking for fgrep... /bin/grep -F [ 120s] checking for ld used by gcc... /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld [ 120s] checking if the linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) is GNU ld... yes [ 120s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 120s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 120s] checking whether ln -s works... yes [ 120s] checking the maximum length of command line arguments... 1572864 [ 120s] checking whether the shell understands some XSI constructs... yes [ 120s] checking whether the shell understands "+="... yes [ 120s] checking for /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld option to reload object files... -r [ 120s] checking for armv7l-unknown-linux-gnueabi-objdump... no [ 120s] checking for objdump... objdump [ 120s] checking how to recognize dependent libraries... pass_all [ 120s] checking for armv7l-unknown-linux-gnueabi-ar... no [ 120s] checking for ar... ar [ 120s] checking for armv7l-unknown-linux-gnueabi-strip... no [ 120s] checking for strip... strip [ 120s] checking for armv7l-unknown-linux-gnueabi-ranlib... no [ 120s] checking for ranlib... ranlib [ 121s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 121s] checking how to run the C preprocessor... gcc -E [ 121s] checking for ANSI C header files... yes [ 121s] checking for sys/types.h... yes [ 121s] checking for sys/stat.h... yes [ 121s] checking for stdlib.h... yes [ 121s] checking for string.h... yes [ 121s] checking for memory.h... yes [ 121s] checking for strings.h... yes [ 121s] checking for inttypes.h... yes [ 121s] checking for stdint.h... yes [ 121s] checking for unistd.h... yes [ 121s] checking for dlfcn.h... yes [ 121s] checking for objdir... .libs [ 121s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 121s] checking for gcc option to produce PIC... -fPIC -DPIC [ 121s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 121s] checking if gcc static flag -static works... no [ 121s] checking if gcc supports -c -o file.o... yes [ 121s] checking if gcc supports -c -o file.o... (cached) yes [ 121s] checking whether the gcc linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) supports shared libraries... yes [ 121s] checking whether -lc should be explicitly linked in... no [ 121s] checking dynamic linker characteristics... GNU/Linux ld.so [ 121s] checking how to hardcode library paths into programs... immediate [ 121s] checking whether stripping libraries is possible... yes [ 121s] checking if libtool supports shared libraries... yes [ 121s] checking whether to build shared libraries... yes [ 121s] checking whether to build static libraries... yes [ 121s] checking for armv7l-unknown-linux-gnueabi-gcc... gcc [ 121s] checking whether we are using the GNU C compiler... (cached) yes [ 121s] checking whether gcc accepts -g... (cached) yes [ 121s] checking for gcc option to accept ISO C89... (cached) none needed [ 121s] checking dependency style of gcc... (cached) gcc3 [ 121s] checking whether gcc and cc understand -c and -o together... yes [ 122s] checking for __attribute__... yes [ 122s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 122s] checking for pkg-config... /usr/bin/pkg-config [ 122s] checking pkg-config is at least version 0.9.0... yes [ 122s] checking whether to build documentation... yes [ 122s] checking for doxygen... no [ 122s] WARNING: [ 122s] The doxygen program was not found in your execute path. [ 122s] You may have doxygen installed somewhere not covered by your path. [ 122s] [ 122s] If this is the case make sure you have the packages installed, AND [ 122s] that the doxygen program is in your execute path (see your [ 122s] shell manual page on setting the $PATH environment variable), OR [ 122s] alternatively, specify the program to use with --with-doxygen. [ 122s] configure: WARNING: no doxygen detected. Documentation will not be built [ 122s] checking for EEZE... yes [ 122s] checking netinet/in.h usability... yes [ 122s] checking netinet/in.h presence... yes [ 122s] checking for netinet/in.h... yes [ 122s] checking for struct ipv6_mreq... yes [ 122s] checking for ANSI C header files... (cached) yes [ 122s] checking whether the compiler supports -Wshadow... yes [ 122s] checking whether tests are built... no [ 122s] checking whether to build eeze_udev_test binary... yes [ 122s] checking whether to build eeze_sensor_test binary... yes [ 122s] checking whether to build eeze_mount binary... yes [ 122s] checking whether to build eeze_disk_ls binary... yes [ 122s] checking whether to build eeze_umount binary... yes [ 122s] checking whether to build eeze_scanner binary... yes [ 122s] configure: updating cache config.cache [ 122s] configure: creating ./config.status [ 122s] config.status: creating Makefile [ 122s] config.status: creating doc/eeze.dox [ 122s] config.status: creating doc/Makefile [ 123s] config.status: creating doc/Doxyfile [ 123s] config.status: creating src/Makefile [ 123s] config.status: creating src/lib/Makefile [ 123s] config.status: creating src/bin/Makefile [ 123s] config.status: creating src/tests/Makefile [ 123s] config.status: creating src/modules/Makefile [ 123s] config.status: creating eeze.pc [ 123s] config.status: creating eeze.spec [ 123s] config.status: creating config.h [ 123s] config.status: executing depfiles commands [ 123s] config.status: executing libtool commands [ 123s] [ 123s] [ 123s] [ 123s] ------------------------------------------------------------------------ [ 123s] eeze 1.7.99.0 [ 123s] ------------------------------------------------------------------------ [ 123s] [ 123s] Configuration Options Summary: [ 123s] Udev Tests.............: yes [ 123s] [ 123s] Tests..............: no (Coverage: no) [ 123s] [ 123s] Demos..................: [ 123s] eeze_mount...........: yes [ 123s] eeze_umount..........: yes [ 123s] eeze_disk_ls.........: yes [ 123s] [ 123s] Utilities..............: [ 123s] eeze_scanner.........: yes [ 123s] [ 123s] IPv6...................: yes [ 123s] [ 123s] Sensor.................: [ 123s] Tizen................: no [ 123s] [ 123s] Documentation..........: no [ 123s] [ 123s] Compilation............: make (or gmake) [ 123s] CPPFLAGS.............: [ 123s] CFLAGS...............: -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -fPIC -Wall -Wshadow [ 123s] LDFLAGS..............: -Wl,--hash-style=both -Wl,--as-needed [ 123s] [ 123s] Installation...........: make install (as root if needed, with 'su' or 'sudo') [ 123s] prefix...............: /usr [ 123s] [ 123s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -fPIC -Wall' [ 123s] + export CFLAGS [ 123s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 123s] + export CXXFLAGS [ 123s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 123s] + export FFLAGS [ 123s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info [ 124s] checking for a BSD-compatible install... /usr/bin/install -c [ 125s] checking whether build environment is sane... yes [ 125s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 125s] checking for gawk... gawk [ 125s] checking whether make sets $(MAKE)... yes [ 125s] checking build system type... armv7l-unknown-linux-gnueabi [ 125s] checking host system type... armv7l-unknown-linux-gnueabi [ 125s] checking for style of include used by make... GNU [ 125s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 125s] checking for gcc... gcc [ 125s] checking whether the C compiler works... yes [ 125s] checking for C compiler default output file name... a.out [ 125s] checking for suffix of executables... [ 125s] checking whether we are cross compiling... no [ 125s] checking for suffix of object files... o [ 125s] checking whether we are using the GNU C compiler... yes [ 125s] checking whether gcc accepts -g... yes [ 125s] checking for gcc option to accept ISO C89... none needed [ 125s] checking dependency style of gcc... gcc3 [ 125s] checking for a sed that does not truncate output... /bin/sed [ 125s] checking for grep that handles long lines and -e... /bin/grep [ 125s] checking for egrep... /bin/grep -E [ 125s] checking for fgrep... /bin/grep -F [ 125s] checking for ld used by gcc... /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld [ 125s] checking if the linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) is GNU ld... yes [ 125s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 125s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 125s] checking whether ln -s works... yes [ 125s] checking the maximum length of command line arguments... 1572864 [ 125s] checking whether the shell understands some XSI constructs... yes [ 125s] checking whether the shell understands "+="... yes [ 125s] checking for /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld option to reload object files... -r [ 125s] checking for armv7l-unknown-linux-gnueabi-objdump... no [ 125s] checking for objdump... objdump [ 125s] checking how to recognize dependent libraries... pass_all [ 125s] checking for armv7l-unknown-linux-gnueabi-ar... no [ 125s] checking for ar... ar [ 125s] checking for armv7l-unknown-linux-gnueabi-strip... no [ 125s] checking for strip... strip [ 125s] checking for armv7l-unknown-linux-gnueabi-ranlib... no [ 125s] checking for ranlib... ranlib [ 125s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 125s] checking how to run the C preprocessor... gcc -E [ 126s] checking for ANSI C header files... yes [ 126s] checking for sys/types.h... yes [ 126s] checking for sys/stat.h... yes [ 126s] checking for stdlib.h... yes [ 126s] checking for string.h... yes [ 126s] checking for memory.h... yes [ 126s] checking for strings.h... yes [ 126s] checking for inttypes.h... yes [ 126s] checking for stdint.h... yes [ 126s] checking for unistd.h... yes [ 126s] checking for dlfcn.h... yes [ 126s] checking for objdir... .libs [ 126s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 126s] checking for gcc option to produce PIC... -fPIC -DPIC [ 126s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 126s] checking if gcc static flag -static works... no [ 126s] checking if gcc supports -c -o file.o... yes [ 126s] checking if gcc supports -c -o file.o... (cached) yes [ 126s] checking whether the gcc linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) supports shared libraries... yes [ 126s] checking whether -lc should be explicitly linked in... no [ 126s] checking dynamic linker characteristics... GNU/Linux ld.so [ 126s] checking how to hardcode library paths into programs... immediate [ 126s] checking whether stripping libraries is possible... yes [ 126s] checking if libtool supports shared libraries... yes [ 126s] checking whether to build shared libraries... yes [ 126s] checking whether to build static libraries... yes [ 126s] checking for armv7l-unknown-linux-gnueabi-gcc... gcc [ 126s] checking whether we are using the GNU C compiler... (cached) yes [ 126s] checking whether gcc accepts -g... (cached) yes [ 126s] checking for gcc option to accept ISO C89... (cached) none needed [ 126s] checking dependency style of gcc... (cached) gcc3 [ 126s] checking whether gcc and cc understand -c and -o together... yes [ 126s] checking for __attribute__... yes [ 126s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 126s] checking for pkg-config... /usr/bin/pkg-config [ 126s] checking pkg-config is at least version 0.9.0... yes [ 126s] checking whether to build documentation... yes [ 126s] checking for doxygen... no [ 126s] WARNING: [ 126s] The doxygen program was not found in your execute path. [ 126s] You may have doxygen installed somewhere not covered by your path. [ 126s] [ 126s] If this is the case make sure you have the packages installed, AND [ 126s] that the doxygen program is in your execute path (see your [ 126s] shell manual page on setting the $PATH environment variable), OR [ 126s] alternatively, specify the program to use with --with-doxygen. [ 126s] configure: WARNING: no doxygen detected. Documentation will not be built [ 127s] checking for EEZE... yes [ 127s] checking netinet/in.h usability... yes [ 127s] checking netinet/in.h presence... yes [ 127s] checking for netinet/in.h... yes [ 127s] checking for struct ipv6_mreq... yes [ 127s] checking for ANSI C header files... (cached) yes [ 127s] checking whether the compiler supports -Wshadow... yes [ 127s] checking whether tests are built... no [ 127s] checking whether to build eeze_udev_test binary... yes [ 127s] checking whether to build eeze_sensor_test binary... yes [ 127s] checking whether to build eeze_mount binary... yes [ 127s] checking whether to build eeze_disk_ls binary... yes [ 127s] checking whether to build eeze_umount binary... yes [ 127s] checking whether to build eeze_scanner binary... yes [ 127s] configure: creating ./config.status [ 127s] config.status: creating Makefile [ 127s] config.status: creating doc/eeze.dox [ 127s] config.status: creating doc/Makefile [ 127s] config.status: creating doc/Doxyfile [ 127s] config.status: creating src/Makefile [ 128s] config.status: creating src/lib/Makefile [ 128s] config.status: creating src/bin/Makefile [ 128s] config.status: creating src/tests/Makefile [ 128s] config.status: creating src/modules/Makefile [ 128s] config.status: creating eeze.pc [ 128s] config.status: creating eeze.spec [ 128s] config.status: creating config.h [ 128s] config.status: config.h is unchanged [ 128s] config.status: executing depfiles commands [ 128s] config.status: executing libtool commands [ 128s] [ 128s] [ 128s] [ 128s] ------------------------------------------------------------------------ [ 128s] eeze 1.7.99.0 [ 128s] ------------------------------------------------------------------------ [ 128s] [ 128s] Configuration Options Summary: [ 128s] Udev Tests.............: yes [ 128s] [ 128s] Tests..............: no (Coverage: no) [ 128s] [ 128s] Demos..................: [ 128s] eeze_mount...........: yes [ 128s] eeze_umount..........: yes [ 128s] eeze_disk_ls.........: yes [ 128s] [ 128s] Utilities..............: [ 128s] eeze_scanner.........: yes [ 128s] [ 128s] IPv6...................: yes [ 128s] [ 128s] Sensor.................: [ 128s] Tizen................: no [ 128s] [ 128s] Documentation..........: no [ 128s] [ 128s] Compilation............: make (or gmake) [ 128s] CPPFLAGS.............: [ 128s] CFLAGS...............: -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -fPIC -Wall -Wshadow [ 128s] LDFLAGS..............: -Wl,--hash-style=both -Wl,--as-needed [ 128s] [ 128s] Installation...........: make install (as root if needed, with 'su' or 'sudo') [ 128s] prefix...............: /usr [ 128s] [ 128s] + make -j4 [ 128s] make all-recursive [ 128s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01' [ 128s] Making all in src [ 128s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/src' [ 128s] Making all in lib [ 128s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/src/lib' [ 128s] CC eeze_net.lo [ 128s] CC eeze_main.lo [ 128s] CC eeze_udev_find.lo [ 128s] CC eeze_udev_private.lo [ 129s] CC eeze_udev_syspath.lo [ 129s] CC eeze_udev_walk.lo [ 129s] CC eeze_udev_watch.lo [ 129s] CC eeze_sensor.lo [ 129s] CCLD libeeze.la [ 129s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/src/lib' [ 129s] Making all in bin [ 129s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/src/bin' [ 129s] CC eeze_sensor_test-eeze_sensor_test.o [ 129s] CC eeze_udev_test-eeze_udev_test.o [ 129s] CCLD eeze_udev_test [ 129s] CCLD eeze_sensor_test [ 130s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/src/bin' [ 130s] Making all in tests [ 130s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/src/tests' [ 130s] make[3]: Nothing to be done for `all'. [ 130s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/src/tests' [ 130s] Making all in modules [ 130s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/src/modules' [ 130s] CC eeze_sensor_fake_la-eeze_sensor_fake.lo [ 130s] CCLD eeze-sensor-fake.la [ 130s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/src/modules' [ 130s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/src' [ 130s] make[3]: Nothing to be done for `all-am'. [ 130s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/src' [ 130s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/src' [ 130s] Making all in doc [ 130s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/doc' [ 130s] make[2]: Nothing to be done for `all'. [ 130s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/doc' [ 130s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01' [ 130s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01' [ 130s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01' [ 130s] + exit 0 [ 130s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.ebXTBh [ 130s] + umask 022 [ 130s] + cd /home/abuild/rpmbuild/BUILD [ 130s] + cd eeze-1.7.0+svn.77318+build01r01 [ 130s] + LANG=C [ 130s] + export LANG [ 130s] + unset DISPLAY [ 130s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm [ 130s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm [ 130s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm [ 130s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm install [ 130s] Making install in src [ 130s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/src' [ 130s] Making install in lib [ 130s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/src/lib' [ 130s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/src/lib' [ 130s] test -z "/usr/lib" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm/usr/lib" [ 130s] /bin/sh ../../libtool --mode=install /usr/bin/install -c libeeze.la '/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm/usr/lib' [ 130s] libtool: install: /usr/bin/install -c .libs/libeeze.so.1.7.99 /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm/usr/lib/libeeze.so.1.7.99 [ 130s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm/usr/lib && { ln -s -f libeeze.so.1.7.99 libeeze.so.1 || { rm -f libeeze.so.1 && ln -s libeeze.so.1.7.99 libeeze.so.1; }; }) [ 130s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm/usr/lib && { ln -s -f libeeze.so.1.7.99 libeeze.so || { rm -f libeeze.so && ln -s libeeze.so.1.7.99 libeeze.so; }; }) [ 130s] libtool: install: /usr/bin/install -c .libs/libeeze.lai /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm/usr/lib/libeeze.la [ 130s] libtool: install: /usr/bin/install -c .libs/libeeze.a /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm/usr/lib/libeeze.a [ 130s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm/usr/lib/libeeze.a [ 130s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm/usr/lib/libeeze.a [ 130s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 130s] test -z "/usr/include/eeze-1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm/usr/include/eeze-1" [ 130s] /usr/bin/install -c -m 644 Eeze.h Eeze_Net.h Eeze_Sensor.h '/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm/usr/include/eeze-1' [ 130s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/src/lib' [ 130s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/src/lib' [ 130s] Making install in bin [ 130s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/src/bin' [ 130s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/src/bin' [ 130s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm/usr/bin" [ 130s] /bin/sh ../../libtool --mode=install /usr/bin/install -c eeze_sensor_test '/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm/usr/bin' [ 130s] libtool: install: warning: `../../src/lib/libeeze.la' has not been installed in `/usr/lib' [ 130s] libtool: install: /usr/bin/install -c .libs/eeze_sensor_test /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm/usr/bin/eeze_sensor_test [ 130s] test -z "" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm" [ 130s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm/usr/bin" [ 130s] /usr/bin/make install-data-hook [ 130s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/src/bin' [ 130s] make[4]: Nothing to be done for `install-data-hook'. [ 130s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/src/bin' [ 130s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/src/bin' [ 130s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/src/bin' [ 130s] Making install in tests [ 130s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/src/tests' [ 130s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/src/tests' [ 130s] make[3]: Nothing to be done for `install-exec-am'. [ 130s] make[3]: Nothing to be done for `install-data-am'. [ 130s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/src/tests' [ 130s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/src/tests' [ 130s] Making install in modules [ 130s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/src/modules' [ 130s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/src/modules' [ 130s] make[3]: Nothing to be done for `install-exec-am'. [ 130s] test -z "/usr/lib/eeze-sensor" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm/usr/lib/eeze-sensor" [ 130s] /bin/sh ../../libtool --mode=install /usr/bin/install -c eeze-sensor-fake.la '/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm/usr/lib/eeze-sensor' [ 130s] libtool: install: /usr/bin/install -c .libs/eeze-sensor-fake.so /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm/usr/lib/eeze-sensor/eeze-sensor-fake.so [ 130s] libtool: install: /usr/bin/install -c .libs/eeze-sensor-fake.lai /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm/usr/lib/eeze-sensor/eeze-sensor-fake.la [ 130s] libtool: install: warning: remember to run `libtool --finish /usr/lib/eeze-sensor' [ 130s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/src/modules' [ 130s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/src/modules' [ 130s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/src' [ 130s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/src' [ 130s] make[3]: Nothing to be done for `install-exec-am'. [ 130s] make[3]: Nothing to be done for `install-data-am'. [ 130s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/src' [ 130s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/src' [ 130s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/src' [ 130s] Making install in doc [ 130s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/doc' [ 130s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/doc' [ 130s] make[2]: Nothing to be done for `install-exec-am'. [ 130s] make[2]: Nothing to be done for `install-data-am'. [ 130s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/doc' [ 130s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01/doc' [ 130s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01' [ 130s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01' [ 130s] make[2]: Nothing to be done for `install-exec-am'. [ 130s] test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm/usr/lib/pkgconfig" [ 130s] /usr/bin/install -c -m 644 eeze.pc '/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm/usr/lib/pkgconfig' [ 130s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01' [ 130s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01' [ 130s] + rm -f /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm/usr/share/info/dir [ 130s] + find /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm -regex '.*\.la$' [ 130s] + xargs rm -f -- [ 130s] + find /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm -regex '.*\.a$' [ 130s] + xargs rm -f -- [ 130s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77318+build01r01 [ 130s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm/usr/bin/eeze_sensor_test [ 130s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm/usr/lib/eeze-sensor/eeze-sensor-fake.so [ 131s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm/usr/lib/libeeze.so.1.7.99 [ 131s] symlinked /usr/lib/debug/usr/lib/libeeze.so.1.7.99.debug to /usr/lib/debug/usr/lib/libeeze.so.1.debug [ 131s] symlinked /usr/lib/debug/usr/lib/libeeze.so.1.7.99.debug to /usr/lib/debug/usr/lib/libeeze.so.debug [ 131s] 190 blocks [ 131s] + /usr/lib/rpm/check-buildroot [ 131s] + /usr/lib/rpm//brp-compress [ 131s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 131s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 131s] + /usr/lib/rpm/brp-python-bytecompile [ 131s] + /usr/lib/rpm/brp-python-hardlink [ 131s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm [ 131s] Processing files: eeze-1.7.0+svn.77318+build01r01-1.4.armv7l [ 131s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl [ 131s] cXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 131s] [ 131s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.TklMUT [ 131s] + umask 022 [ 131s] + cd /home/abuild/rpmbuild/BUILD [ 131s] + cd eeze-1.7.0+svn.77318+build01r01 [ 131s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm/usr/share/doc/eeze-1.7.0+svn.77318+build01r01 [ 131s] + export DOCDIR [ 131s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm/usr/share/doc/eeze-1.7.0+svn.77318+build01r01 [ 131s] + cp -pr AUTHORS COPYING README /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm/usr/share/doc/eeze-1.7.0+svn.77318+build01r01 [ 131s] + exit 0 [ 131s] Provides: libeeze.so.1 [ 131s] Requires(interp): /bin/sh /bin/sh [ 131s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 131s] Requires(post): /bin/sh /sbin/ldconfig [ 131s] Requires(postun): /bin/sh /sbin/ldconfig [ 131s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libecore.so.1 libeeze.so.1 libeina.so.1 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpthread.so.0 libpthread.so.0(GLIBC_2.4) librt.so.1 libudev.so.0 [ 131s] Processing files: eeze-devel-1.7.0+svn.77318+build01r01-1.4.armv7l [ 131s] Provides: eeze-sensor-fake.so pkgconfig(eeze) = 1.7.99.0 [ 131s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 131s] Requires: /usr/bin/pkg-config libc.so.6 libc.so.6(GLIBC_2.4) libeeze.so.1 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) pkgconfig(ecore) >= 1.6.99 pkgconfig(eina) >= 1.6.99 pkgconfig(libudev) [ 131s] Processing files: eeze-debuginfo-1.7.0+svn.77318+build01r01-1.4.armv7l [ 131s] Processing files: eeze-debugsource-1.7.0+svn.77318+build01r01-1.4.armv7l [ 131s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm [ 131s] Wrote: /home/abuild/rpmbuild/SRPMS/eeze-1.7.0+svn.77318+build01r01-1.4.src.rpm [ 131s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/eeze-1.7.0+svn.77318+build01r01-1.4.armv7l.rpm [ 131s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/eeze-devel-1.7.0+svn.77318+build01r01-1.4.armv7l.rpm [ 131s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/eeze-debuginfo-1.7.0+svn.77318+build01r01-1.4.armv7l.rpm [ 131s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/eeze-debugsource-1.7.0+svn.77318+build01r01-1.4.armv7l.rpm [ 131s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.vrcpjG [ 131s] + umask 022 [ 131s] + cd /home/abuild/rpmbuild/BUILD [ 131s] + cd eeze-1.7.0+svn.77318+build01r01 [ 131s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77318+build01r01-1.4.arm [ 131s] + exit 0 [ 131s] ... checking for files with abuild user/group [ 131s] ... creating baselibs [ 132s] ... comparing built packages with the former built [ 132s] /usr/lib/build/rpm-check.sh [ 132s] compare /.build.oldpackages/eeze-1.7.0+svn.77318+build01r01-1.3.src.rpm /home/abuild/rpmbuild/SRPMS/eeze-1.7.0+svn.77318+build01r01-1.4.src.rpm [ 132s] compare /.build.oldpackages/eeze-1.7.0+svn.77318+build01r01-1.3.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/eeze-1.7.0+svn.77318+build01r01-1.4.armv7l.rpm [ 132s] --- /tmp/tmp.VsT2ONng0W 2013-10-10 22:44:17.323445709 +0000 [ 132s] +++ /tmp/tmp.KdWeG8Iqid 2013-10-10 22:44:17.335445709 +0000 [ 132s] @@ -14,7 +14,7 @@ [ 132s] Each of the above examples can be performed by using only a single [ 132s] eeze function, as one of the primary focuses of the library is to [ 132s] reduce the complexity of managing devices. [ 132s] - tizen Tizen:2.0:Panda obs://w16.vlan200.tizen.org/Tizen:2.0:Panda/standard/e39f240818d3d61a8e0304c97f354a62-eeze BSD BSD [ 132s] + tizen Tizen:2.0:Panda obs://w11.vlan200.tizen.org/Tizen:2.0:Panda/standard/e39f240818d3d61a8e0304c97f354a62-eeze BSD BSD [ 132s] System Environment/Libraries http://www.enlightenment.org/ (none) (none) (none) [ 132s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 132s] cpio gzip 9 [ 132s] RPM meta information is different [ 132s] compare /.build.oldpackages/eeze-debuginfo-1.7.0+svn.77318+build01r01-1.3.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/eeze-debuginfo-1.7.0+svn.77318+build01r01-1.4.armv7l.rpm [ 132s] --- /tmp/tmp.WjL0lt5BKl 2013-10-10 22:44:17.379445711 +0000 [ 132s] +++ /tmp/tmp.oFufoztT3k 2013-10-10 22:44:17.391445711 +0000 [ 132s] @@ -3,7 +3,7 @@ [ 132s] This package provides debug information for package eeze. [ 132s] Debug information is useful when developing applications that use this [ 132s] package or when debugging this package. [ 132s] - tizen Tizen:2.0:Panda obs://w16.vlan200.tizen.org/Tizen:2.0:Panda/standard/e39f240818d3d61a8e0304c97f354a62-eeze BSD BSD [ 132s] + tizen Tizen:2.0:Panda obs://w11.vlan200.tizen.org/Tizen:2.0:Panda/standard/e39f240818d3d61a8e0304c97f354a62-eeze BSD BSD [ 132s] Development/Debug http://www.enlightenment.org/ (none) (none) (none) [ 132s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 132s] cpio gzip 9 [ 132s] RPM meta information is different [ 132s] compare /.build.oldpackages/eeze-debugsource-1.7.0+svn.77318+build01r01-1.3.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/eeze-debugsource-1.7.0+svn.77318+build01r01-1.4.armv7l.rpm [ 132s] --- /tmp/tmp.EvDhUiAX1r 2013-10-10 22:44:17.431445713 +0000 [ 132s] +++ /tmp/tmp.VzrAf35NgT 2013-10-10 22:44:17.443445713 +0000 [ 132s] @@ -3,7 +3,7 @@ [ 132s] This package provides debug sources for package eeze. [ 132s] Debug sources are useful when developing applications that use this [ 132s] package or when debugging this package. [ 132s] - tizen Tizen:2.0:Panda obs://w16.vlan200.tizen.org/Tizen:2.0:Panda/standard/e39f240818d3d61a8e0304c97f354a62-eeze BSD BSD [ 132s] + tizen Tizen:2.0:Panda obs://w11.vlan200.tizen.org/Tizen:2.0:Panda/standard/e39f240818d3d61a8e0304c97f354a62-eeze BSD BSD [ 132s] Development/Debug http://www.enlightenment.org/ (none) (none) (none) [ 132s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 132s] cpio gzip 9 [ 132s] RPM meta information is different [ 132s] compare /.build.oldpackages/eeze-devel-1.7.0+svn.77318+build01r01-1.3.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/eeze-devel-1.7.0+svn.77318+build01r01-1.4.armv7l.rpm [ 132s] --- /tmp/tmp.G4spCC5iey 2013-10-10 22:44:17.483445715 +0000 [ 132s] +++ /tmp/tmp.Pp8QPZKhFP 2013-10-10 22:44:17.495445715 +0000 [ 132s] @@ -1,7 +1,7 @@ [ 132s] eeze-devel 1.7.0+svn.77318+build01r01 (none) [ 132s] Development files for Eeze [ 132s] Headers, static libraries, test programs and documentation for Eeze [ 132s] - tizen Tizen:2.0:Panda obs://w16.vlan200.tizen.org/Tizen:2.0:Panda/standard/e39f240818d3d61a8e0304c97f354a62-eeze BSD BSD [ 132s] + tizen Tizen:2.0:Panda obs://w11.vlan200.tizen.org/Tizen:2.0:Panda/standard/e39f240818d3d61a8e0304c97f354a62-eeze BSD BSD [ 132s] System Environment/Libraries http://www.enlightenment.org/ (none) (none) (none) [ 132s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 132s] cpio gzip 9 [ 132s] RPM meta information is different [ 132s] ... saving built statistics [ 132s] /.build/build: line 3144: mount: command not found [ 132s] ERROR: no root disk device found, yet another new device name? [ 132s] ls: cannot access /sys/block/: No such file or directory [ 132s] umount: /sys: not mounted [ 132s] ... saving built packages [ 133s] /home/abuild/rpmbuild/RPMS/armv7l/eeze-1.7.0+svn.77318+build01r01-1.4.armv7l.rpm [ 133s] /home/abuild/rpmbuild/RPMS/armv7l/eeze-debuginfo-1.7.0+svn.77318+build01r01-1.4.armv7l.rpm [ 133s] /home/abuild/rpmbuild/RPMS/armv7l/eeze-debugsource-1.7.0+svn.77318+build01r01-1.4.armv7l.rpm [ 133s] /home/abuild/rpmbuild/RPMS/armv7l/eeze-devel-1.7.0+svn.77318+build01r01-1.4.armv7l.rpm [ 133s] /home/abuild/rpmbuild/SRPMS/eeze-1.7.0+svn.77318+build01r01-1.4.src.rpm [ 133s] /home/abuild/rpmbuild/OTHER/_statistics [ 133s] [ 133s] w11 finished "build eeze.spec" at Thu Oct 10 22:44:17 UTC 2013. [ 133s] [ 134s] /.build/build: line 391: mount: command not found [ 136s] Warning: VM doesn't support sysrq and /sbin/halt not installed [ 136s] Warning: clean shut down of the VM didn't work [ 136s] [ 127.166754] Kernel panic - not syncing: Attempted to kill init! [ 136s] [ 127.167206] Pid: 1, comm: qemu-arm Not tainted 3.1.9-1.4-default #1 [ 136s] [ 127.167649] Call Trace: [ 136s] [ 127.167840] [] dump_trace+0x9a/0x270 [ 136s] [ 127.168257] [] dump_stack+0x69/0x6f [ 136s] [ 127.168639] [] panic+0x95/0x1a9 [ 136s] [ 127.168992] [] forget_original_parent+0x244/0x250 [ 136s] [ 127.169499] [] exit_notify+0x10/0x160 [ 136s] [ 127.169985] [] do_exit+0x1dd/0x410 [ 136s] [ 127.170419] [] do_group_exit+0x41/0xb0 [ 136s] [ 127.170841] [] sys_exit_group+0x12/0x20 [ 136s] [ 127.171260] [] system_call_fastpath+0x16/0x1b [ 136s] [ 127.171740] [<00000000601208d9>] 0x601208d8 [ 137s] [ 127.172253] Rebooting in 1 seconds..build: extracting built packages... [ 137s] eeze-1.7.0+svn.77318+build01r01-1.4.armv7l.rpm [ 137s] eeze-debuginfo-1.7.0+svn.77318+build01r01-1.4.armv7l.rpm [ 137s] eeze-debugsource-1.7.0+svn.77318+build01r01-1.4.armv7l.rpm [ 137s] eeze-devel-1.7.0+svn.77318+build01r01-1.4.armv7l.rpm [ 137s] eeze-1.7.0+svn.77318+build01r01-1.4.src.rpm [ 137s] _statistics