[ 0s] Using BUILD_ROOT=/srv/build/root_3/.mount [ 0s] Using BUILD_ARCH=armv7el [ 0s] Doing kvm build in /srv/build/root_3/root [ 0s] [ 0s] [ 0s] w08 started "build elm-modules.spec" at Fri Oct 11 02:20:48 UTC 2013. [ 0s] [ 0s] Building elm-modules for project 'Tizen:2.0:Panda' repository 'standard' arch 'armv7el' srcmd5 '9cf585487e43abb6611cf5296fc21a39' [ 0s] [ 0s] processing specfile /srv/build/root_3/.build-srcdir/elm-modules.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_3/.build-srcdir/elm-modules.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/3/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_3/.build.rpmlist /srv/build/root_3/.build-srcdir/elm-modules.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 41: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 44: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 45: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 48: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 51: echo: write error: Invalid argument [ 0s] Please check cpu value and header information for m68k! [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 55: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 59: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 60: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 61: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 62: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 63: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 64: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 67: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 68: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 71: echo: write error: Invalid argument [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc-common -> eglibc [ 1s] cycle: libgcc -> eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: libgcc -> eglibc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: rpm-libs -> rpm [ 1s] breaking dependency rpm -> rpm-libs [ 1s] [1/56] preinstalling libgcc... [ 1s] [2/56] preinstalling setup... [ 1s] [3/56] preinstalling filesystem... [ 1s] [4/56] preinstalling eglibc... [ 1s] [5/56] preinstalling eglibc-common... [ 1s] [6/56] preinstalling bash... [ 1s] [7/56] preinstalling bzip2-libs... [ 1s] [8/56] preinstalling diffutils... [ 1s] [9/56] preinstalling elfutils-libelf... [ 2s] [10/56] preinstalling libattr... [ 2s] [11/56] preinstalling liblua... [ 2s] [12/56] preinstalling libstdc++... [ 2s] [13/56] preinstalling ncurses-libs... [ 2s] [14/56] preinstalling nspr... [ 2s] [15/56] preinstalling nss-softokn-freebl... [ 2s] [16/56] preinstalling popt... [ 2s] [17/56] preinstalling readline... [ 2s] [18/56] preinstalling sed... [ 2s] [19/56] preinstalling sqlite... [ 2s] [20/56] preinstalling xz-libs... [ 2s] [21/56] preinstalling zlib... [ 2s] [22/56] preinstalling qemu.x86_64... [ 2s] [23/56] preinstalling libcap... [ 2s] [24/56] preinstalling libacl... [ 2s] [25/56] preinstalling libfile... [ 2s] [26/56] preinstalling bzip2... [ 2s] [27/56] preinstalling nss... [ 2s] [28/56] preinstalling tar... [ 2s] [29/56] preinstalling coreutils... [ 2s] [30/56] preinstalling file... [ 2s] [31/56] preinstalling rpm... [ 2s] [32/56] preinstalling tizen-accelerator... [ 2s] [33/56] preinstalling rpm-libs... [ 2s] [34/56] preinstalling gmp-x86-arm... [ 2s] [35/56] preinstalling mpc-x86-arm... [ 2s] [36/56] preinstalling mpfr-x86-arm... [ 2s] [37/56] preinstalling bzip2-libs-x86-arm... [ 3s] [38/56] preinstalling eglibc-x86-arm... [ 3s] [39/56] preinstalling elfutils-libelf-x86-arm... [ 3s] [40/56] preinstalling libacl-x86-arm... [ 3s] [41/56] preinstalling libattr-x86-arm... [ 3s] [42/56] preinstalling libcap-x86-arm... [ 3s] [43/56] preinstalling libfile-x86-arm... [ 3s] [44/56] preinstalling libgcc-x86-arm... [ 3s] [45/56] preinstalling liblua-x86-arm... [ 3s] [46/56] preinstalling ncurses-libs-x86-arm... [ 3s] [47/56] preinstalling nspr-x86-arm... [ 3s] [48/56] preinstalling nss-softokn-freebl-x86-arm... [ 3s] [49/56] preinstalling nss-x86-arm... [ 3s] [50/56] preinstalling popt-x86-arm... [ 3s] [51/56] preinstalling rpm-libs-x86-arm... [ 3s] [52/56] preinstalling sqlite-x86-arm... [ 3s] [53/56] preinstalling xz-libs-x86-arm... [ 3s] [54/56] preinstalling zlib-x86-arm... [ 3s] [55/56] preinstalling bash-x86-arm... [ 3s] [56/56] preinstalling rpm-x86-arm... [ 3s] [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl-libs -> perl [ 3s] [1/8] preinstalling e2fsprogs-libs... [ 3s] [2/8] preinstalling libpcre... [ 3s] [3/8] preinstalling libuuid... [ 3s] [4/8] preinstalling grep... [ 3s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 3s] copying packages... [ 4s] reordering...cycle: bash -> eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> bash [ 4s] cycle: eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> libgcc [ 4s] breaking dependency eglibc -> eglibc-common [ 4s] cycle: eglibc -> libgcc [ 4s] breaking dependency libgcc -> eglibc [ 4s] cycle: filesystem -> setup [ 4s] breaking dependency setup -> filesystem [ 4s] cycle: ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses [ 4s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses-base [ 4s] cycle: perl -> perl-libs [ 4s] breaking dependency perl -> perl-libs [ 4s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 4s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl -> perl-IO-Compress-Zlib [ 4s] breaking dependency perl -> perl-IO-Compress-Zlib [ 4s] cycle: perl -> perl-IO-Compress-Base [ 4s] breaking dependency perl -> perl-IO-Compress-Base [ 4s] cycle: perl -> perl-Module-Pluggable [ 4s] breaking dependency perl -> perl-Module-Pluggable [ 4s] cycle: perl -> perl-Pod-Simple [ 4s] breaking dependency perl -> perl-Pod-Simple [ 4s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 4s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 4s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 4s] cycle: dbus -> dbus-libs [ 4s] breaking dependency dbus -> dbus-libs [ 4s] cycle: libudev -> udev -> systemd [ 4s] breaking dependency systemd -> libudev [ 4s] cycle: nss -> nss-sysinit [ 4s] breaking dependency nss -> nss-sysinit [ 4s] cycle: perl-CPAN -> perl-Test-Harness [ 4s] breaking dependency perl-Test-Harness -> perl-CPAN [ 4s] cycle: rpm-libs -> rpm [ 4s] breaking dependency rpm -> rpm-libs [ 4s] cycle: pkgmgr-info -> pkgmgr-info-parser [ 4s] breaking dependency pkgmgr-info-parser -> pkgmgr-info [ 4s] cycle: pulseaudio-libs -> pulseaudio [ 4s] breaking dependency pulseaudio -> pulseaudio-libs [ 4s] done [ 5s] booting kvm ... [ 5s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/kernel/vmlinuz -initrd /srv/kernel/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8192 -drive file=/srv/build/root_3/root,if=virtio,cache=unsafe -drive file=/srv/build/root_3/root,if=ide,index=0,cache=unsafe -drive file=/srv/build/root_3/swap,if=virtio,cache=unsafe -smp 4 [ 6s]  [ 6s] Google, Inc. [ 6s] Serial Graphics Adapter 09/05/12 [ 6s] SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ (abuild@build24) Wed Sep 5 14:01:11 UTC 2012 [ 6s] Term: 80x24 [ 6s] 4 0 [ 6s]  SeaBIOS (version 1.6.3-20120905_140109) [ 6s] [ 6s] Booting from ROM... [ 8s] doing fast boot [ 9s] Creating device nodes with udev [ 9s] udevd[227]: failed to execute '/etc/sysconfig/network/scripts/ifup-sysctl' '/etc/sysconfig/network/scripts/ifup-sysctl lo -o hotplug': No such file or directory [ 9s] [ 9s] Waiting for device /dev/vda to appear: ok [ 9s] fsck from util-linux 2.20.1 [ 9s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 9s] /dev/vda: clean, 9678/2097152 files, 272560/8388608 blocks [ 9s] fsck succeeded. Mounting root device read-write. [ 9s] Mounting root /dev/vda [ 9s] mount -o rw,noatime,acl,user_xattr -t ext4 /dev/vda /root [ 9s] replacing /etc/mtab with symlink to /proc/self/mounts [ 9s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 10s] 2nd stage started in virtual machine [ 10s] machine type: armv7l [ 10s] switching personality to 8... [ 10s] 2nd stage started in virtual machine [ 10s] machine type: armv7l [ 10s] /.build/build: line 770: mount: command not found [ 10s] swapon on /dev/vdb [ 10s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 10s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 10s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 10s] logging output to //.build.log... [ 10s] processing specfile /.build-srcdir/elm-modules.spec ... [ 10s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/elm-modules.spec build rpmlint-Factory ... [ 11s] running rpm-x86-arm postinstall script [ 11s] running rpm-libs-x86-arm postinstall script [ 11s] running tizen-accelerator postinstall script [ 11s] running bash-x86-arm postinstall script [ 11s] initializing rpm db... [ 18s] [1/287] installing kernel-headers-2.6.36-5.1 [ 19s] [2/287] installing libX11-common-1.5.0-4.5 [ 19s] [3/287] installing opengl-es-virtual-drv-0.1.3-10.4 [ 19s] [4/287] installing pulseaudio-config-2.1-2.1 [ 19s] [5/287] installing tizen-release-2.0.0-2.4 [ 19s] [6/287] installing tzdata-2011h-4.2 [ 19s] [7/287] installing libgcc-4.5.3-5.1 [ 19s] [8/287] installing setup-0.1-5.1 [ 19s] [9/287] installing filesystem-0.1-5.1 [ 20s] warning: group lock does not exist - using root [ 20s] warning: group mail does not exist - using root [ 20s] [10/287] installing eglibc-2.13-5.1 [ 20s] [11/287] installing eglibc-common-2.13-5.1 [ 29s] [12/287] installing iniparser-2.17-5.4 [ 29s] [13/287] installing alsa-scenario-0.2.1-15.4 [ 29s] [14/287] installing bash-4.1-6.3 [ 29s] [15/287] installing bzip2-libs-1.0.5-8.1 [ 29s] [16/287] installing cpio-2.8-7.1 [ 29s] [17/287] installing diffutils-3.0-6.2 [ 29s] [18/287] installing e2fsprogs-libs-1.41.11-3.3 [ 29s] [19/287] installing eina-1.7.1+svn.77445+build01r01-1.4 [ 30s] [20/287] installing elfutils-libelf-0.152-5.1 [ 30s] [21/287] installing expat-2.0.1-12.1 [ 30s] [22/287] installing fdupes-1.40-46.1 [ 30s] [23/287] installing findutils-4.2.31-5.1 [ 30s] [24/287] installing fribidi-0.19.5-7.4 [ 30s] [25/287] installing gdbm-1.8.3-5.1 [ 30s] [26/287] installing json-c-0.10-1.5 [ 30s] [27/287] installing kmod-5-4.1 [ 30s] [28/287] installing libICE-1.0.8-3.5 [ 30s] [29/287] installing libXau-1.0.7-3.4 [ 30s] [30/287] installing libasound-1.0.24.1-3.3 [ 30s] [31/287] installing libattr-2.4.44-12.4 [ 31s] [32/287] installing libdrm2-2.4.35-18.5 [ 31s] [33/287] installing libexif-0.6.21-6.3 [ 31s] [34/287] installing libffi-3.0.9-102.4 [ 31s] [35/287] installing libgomp-4.5.3-5.1 [ 31s] [36/287] installing libidn-1.15-9.4 [ 31s] [37/287] installing libiri-1.1-3.4 [ 31s] [38/287] installing libjpeg-turbo-1.2.0-10.4 [ 31s] [39/287] installing liblua-5.1.4-9.3 [ 31s] [40/287] installing libmm-ta-0.1.4-4.4 [ 31s] [41/287] installing libogg-1.2.1-5.4 [ 31s] [42/287] installing libstdc++-4.5.3-5.1 [ 32s] [43/287] installing libtool-ltdl-2.2.6b-4.4 [ 32s] [44/287] installing libuuid-2.20.2-4.3 [ 32s] [45/287] installing lzo-2.03-5.1 [ 32s] [46/287] installing m4-1.4.14-5.1 [ 32s] [47/287] installing make-3.81-5.1 [ 32s] [48/287] installing net-tools-1.60-90.3 [ 32s] [49/287] installing nspr-4.8.7-4.4 [ 32s] [50/287] installing nss-softokn-freebl-3.12.9-6.4 [ 32s] [51/287] installing patch-2.6.1.169-5.1 [ 32s] [52/287] installing pixman-0.26.0-8.2 [ 32s] [53/287] installing pkgconfig-0.25-6.1 [ 32s] [54/287] installing popt-1.16-6.3 [ 33s] [55/287] installing readline-5.2-17.4 [ 33s] [56/287] installing sed-4.1.5-5.2 [ 33s] [57/287] installing smack-1.0slp2+s7-2.3 [ 33s] [58/287] installing speex-1.2rc1-5.4 [ 33s] [59/287] installing sqlite-3.7.9-4.4 [ 33s] [60/287] installing xz-libs-5.0.3-4.3 [ 33s] [61/287] installing zlib-1.2.5-6.3 [ 33s] [62/287] installing ncurses-libs-5.7-7.4 [ 33s] [63/287] installing build-compare-2009.10.14-30.1 [ 33s] [64/287] installing libstdc++-devel-4.5.3-5.1 [ 34s] [65/287] installing qemu.x86_64-1.2-2.3 [ 41s] [66/287] installing eglibc-headers-2.13-5.1 [ 41s] [67/287] installing eina-devel-1.7.1+svn.77445+build01r01-1.4 [ 42s] [68/287] installing fribidi-devel-0.19.5-7.4 [ 42s] [69/287] installing libcap-2.21-4.3 [ 42s] [70/287] installing libexif-devel-0.6.21-6.3 [ 42s] [71/287] installing liblua-devel-5.1.4-9.3 [ 42s] [72/287] installing pixman-devel-0.26.0-8.2 [ 42s] [73/287] installing sysvinit-utils-2.87-8.1 [ 42s] [74/287] installing unzip-6.0-12.4 [ 42s] [75/287] installing zlib-devel-1.2.5-6.3 [ 42s] [76/287] installing c-ares-1.7.4-6.1 [ 42s] [77/287] installing embryo-1.7.1+svn.76491+build01r01-1.4 [ 42s] [78/287] installing freetype-2.4.9-3.4 [ 42s] [79/287] installing gmp-5.0.1-5.1 [ 43s] [80/287] installing libacl-2.2.49-4.3 [ 43s] [81/287] installing libdlog-0.4.1-7.5 [ 43s] [82/287] installing libdrm-slp1-2.4.35-18.5 [ 43s] [83/287] installing libfile-5.04-5.1 [ 43s] [84/287] installing libpcre-7.9-3.1 [ 43s] [85/287] installing libpng-1.2.50-3.4 [ 43s] [86/287] installing libsndfile-1.0.25-3.4 [ 43s] [87/287] installing libtheora-1.1.1-6.4 [ 43s] [88/287] installing libvorbis-1.2.3-5.4 [ 43s] [89/287] installing libxcb-1.8.1-3.5 [ 44s] [90/287] installing libxml2-2.7.8-11.4 [ 44s] [91/287] installing lzo-minilzo-2.03-5.1 [ 44s] [92/287] installing ncurses-5.7-7.4 [ 44s] [93/287] installing openssl-1.0.1c-4.4 [ 44s] [94/287] installing binutils-2.21.51.20110421-6.1 [ 44s] [95/287] installing bzip2-1.0.5-8.1 [ 44s] [96/287] installing glib2-2.32.3-7.5 [ 44s] [97/287] installing libSM-1.2.1-3.5 [ 44s] [98/287] installing libblkid-2.20.2-4.3 [ 45s] [99/287] installing libicu-4.8-3.4 [ 45s] [100/287] installing libprivilege-control-0.0.19-1.4 [ 45s] ln: creating symbolic link `/lib/udev/rules.d/95-permissions-slp.rules': No such file or directory [ 45s] warning: %post(libprivilege-control-0.0.19-1.4.armv7l) scriptlet failed, exit status 1 [ 45s] [101/287] installing xz-5.0.3-4.3 [ 45s] [102/287] installing eet-1.7.1+svn.77495+build01r01-1.6 [ 45s] [103/287] installing elfutils-libs-0.152-5.1 [ 45s] [104/287] installing nss-3.12.9-6.4 [ 46s] [105/287] installing perl-5.12.1-63.1 [ 46s] [106/287] installing ncurses-base-5.7-7.4 [ 46s] [107/287] installing perl-HTML-Tagset-3.20-12.1 [ 46s] [108/287] installing perl-IO-Compress-Base-2.008-63.1 [ 47s] [109/287] installing perl-Module-Pluggable-3.60-63.1 [ 47s] [110/287] installing perl-Pod-Escapes-1.04-63.1 [ 47s] [111/287] installing perl-TimeDate-1.20-5.1 [ 47s] [112/287] installing eglibc-devel-2.13-5.1 [ 47s] [113/287] installing embryo-devel-1.7.1+svn.76491+build01r01-1.4 [ 47s] [114/287] installing grep-2.5.1a-65.2 [ 47s] [115/287] installing lzo-devel-2.03-5.1 [ 47s] [116/287] installing mpfr-3.0.0-4.4 [ 47s] [117/287] installing perl-Compress-Raw-Zlib-2.008-63.1 [ 47s] [118/287] installing perl-devel-5.12.1-63.1 [ 47s] [119/287] installing perl-libs-5.12.1-63.1 [ 47s] [120/287] installing tar-1.17-7.1 [ 48s] [121/287] installing bundle-0.1.27-1.4 [ 48s] [122/287] installing coreutils-6.9-13.1 [ 48s] [123/287] installing ecore-1.7.1+svn.77580+build01r01-1.4 [ 48s] [124/287] installing eet-devel-1.7.1+svn.77495+build01r01-1.6 [ 48s] [125/287] installing file-5.04-5.1 [ 48s] [126/287] installing freetype-devel-2.4.9-3.4 [ 48s] [127/287] installing gstreamer-0.10.36-7.3 [ 48s] [128/287] installing libX11-1.5.0-4.5 [ 48s] [129/287] installing libmm-common-0.2.53-4.3 [ 48s] [130/287] installing libmount-2.20.2-4.3 [ 48s] [131/287] installing libsf-common-0.3.18-1.3 [ 49s] [132/287] installing xz-lzma-compat-5.0.3-4.3 [ 49s] [133/287] installing app-checker-0.0.16-3.5 [ 49s] [134/287] installing elfutils-0.152-5.1 [ 49s] [135/287] installing heynoti-0.0.2-41.3 [ 49s] [136/287] installing nss-sysinit-3.12.9-6.4 [ 49s] [137/287] installing libcurl-7.21.3-8.4 [ 49s] [138/287] installing libsoup2.4-2.38.1_0.1.1-1.2 [ 49s] [139/287] installing libslp-db-util-0.1.1-7.3 [ 50s] [140/287] installing perl-ExtUtils-ParseXS-2.18-63.1 [ 50s] [141/287] installing perl-Pod-Simple-3.07-63.1 [ 50s] [142/287] installing perl-Test-Simple-0.80-63.1 [ 50s] [143/287] installing tizen-accelerator-1.0.1-5.1 [ 50s] [144/287] installing libXcomposite-0.4.3-5.3 [ 50s] [145/287] installing libXext-1.3.1-3.3 [ 50s] [146/287] installing libXfixes-5.0-4.3 [ 50s] [147/287] installing libXrender-0.9.7-3.3 [ 51s] [148/287] installing libidn-devel-1.15-9.4 [ 51s] [149/287] installing perl-IO-Compress-Zlib-2.008-63.1 [ 51s] [150/287] installing perl-Test-Harness-3.12-63.1 [ 51s] [151/287] installing gawk-3.1.5-4.4 [ 51s] [152/287] installing gzip-1.3.14-6.1 [ 51s] [153/287] installing mpc-0.9-5.4 [ 51s] [154/287] installing pam-1.1.5-6.1 [ 51s] [155/287] installing xdgmime-0.0.12-4.4 [ 51s] chown: `root:root': invalid user [ 51s] [156/287] installing app-checker-server-0.0.16-3.5 [ 51s] [157/287] installing build-2011.01.10a-5.1 [ 51s] [158/287] installing ecore-imf-1.7.1+svn.77580+build01r01-1.4 [ 52s] [159/287] installing ecore-input-1.7.1+svn.77580+build01r01-1.4 [ 52s] [160/287] installing giflib-4.1.6-15.4 [ 52s] [161/287] installing curl-7.21.3-8.4 [ 52s] [162/287] installing dbus-1.6.4-7.1 [ 52s] warning: group dbus does not exist - using root [ 52s] [163/287] installing ecore-con-1.7.1+svn.77580+build01r01-1.4 [ 52s] [164/287] installing libmm-utility-0.7-3.3 [ 52s] [165/287] installing util-linux-2.20.2-4.3 [ 52s] warning: group tty does not exist - using root [ 52s] /bin/chown: `root:root': invalid user [ 52s] [166/287] installing app2sd-0.5-8.5 [ 52s] [167/287] installing fontconfig-2.9.0-4.5 [ 55s] [168/287] installing librua-0.1.0-36.3 [ 55s] persist [ 55s] /var/tmp/rpm-tmp.YtN9Hf: line 9: chsmack: command not found [ 55s] /var/tmp/rpm-tmp.YtN9Hf: line 10: chsmack: command not found [ 55s] warning: %post(librua-0.1.0-36.3.armv7l) scriptlet failed, exit status 127 [ 55s] [169/287] installing glib2-devel-2.32.3-7.5 [ 55s] [170/287] installing bzip2-libs-x86-arm-1.0.5-8.4 [ 55s] [171/287] installing dbus-libs-1.6.4-7.1 [ 55s] [172/287] installing eglibc-x86-arm-2.13-8.5 [ 56s] [173/287] installing elfutils-libelf-x86-arm-0.152-8.4 [ 56s] [174/287] installing elfutils-libs-x86-arm-0.152-8.7 [ 56s] [175/287] installing fontconfig-devel-2.9.0-4.5 [ 56s] [176/287] installing gmp-x86-arm-5.0.1-8.4 [ 56s] [177/287] installing libacl-x86-arm-2.2.49-8.4 [ 57s] [178/287] installing libattr-x86-arm-2.4.44-8.4 [ 57s] [179/287] installing libcap-x86-arm-2.21-8.4 [ 57s] [180/287] installing libfile-x86-arm-5.04-8.4 [ 57s] [181/287] installing libgcc-x86-arm-4.5.3-8.4 [ 57s] [182/287] installing liblua-x86-arm-5.1.4-8.4 [ 57s] [183/287] installing mpc-x86-arm-0.9-8.4 [ 58s] [184/287] installing mpfr-x86-arm-3.0.0-8.4 [ 58s] [185/287] installing ncurses-libs-x86-arm-5.7-8.4 [ 58s] [186/287] installing nspr-x86-arm-4.8.7-8.7 [ 58s] [187/287] installing nss-softokn-freebl-x86-arm-3.12.9-8.7 [ 58s] [188/287] installing nss-x86-arm-3.12.9-8.7 [ 58s] [189/287] installing perl-ExtUtils-MakeMaker-6.36-63.1 [ 59s] [190/287] installing popt-x86-arm-1.16-8.4 [ 59s] [191/287] installing sqlite-x86-arm-3.7.13-8.4 [ 59s] [192/287] installing xz-libs-x86-arm-5.0.3-8.4 [ 59s] [193/287] installing zlib-x86-arm-1.2.5-8.4 [ 59s] [194/287] installing libXdamage-1.1.3-5.3 [ 59s] [195/287] installing libXgesture-0.1.0-3.3 [ 60s] [196/287] installing libXi-1.6.1-3.3 [ 60s] [197/287] installing libXinerama-1.1.2-3.2 [ 60s] [198/287] installing libXv-1.0.7-3.3 [ 60s] [199/287] installing libcurl-devel-7.21.3-8.4 [ 60s] [200/287] installing libdri2-0.1.0-13.3 [ 60s] [201/287] installing libXcursor-1.1.13-3.3 [ 60s] [202/287] installing libXrandr-1.4.0-5.3 [ 60s] [203/287] installing ecore-fb-1.7.1+svn.77580+build01r01-1.4 [ 60s] [204/287] installing cpp-4.5.3-5.1 [ 61s] [205/287] installing ecore-file-1.7.1+svn.77580+build01r01-1.4 [ 61s] [206/287] installing ecore-ipc-1.7.1+svn.77580+build01r01-1.4 [ 61s] [207/287] installing cairo-1.12.8-6.3 [ 61s] [208/287] installing rpm-4.9.1-7.4 [ 61s] [209/287] installing dbus-devel-1.6.4-7.1 [ 61s] [210/287] installing perl-CPAN-1.9205-63.1 [ 61s] [211/287] installing bash-x86-arm-4.1-8.2 [ 62s] [212/287] installing dbus-glib-0.100-6.1 [ 62s] [213/287] installing fdupes-x86-arm-1.40-8.4 [ 62s] [214/287] installing findutils-x86-arm-4.2.31-8.4 [ 62s] [215/287] installing gawk-x86-arm-3.1.5-8.4 [ 62s] [216/287] installing gzip-x86-arm-1.3.14-8.4 [ 62s] [217/287] installing make-x86-arm-3.81-8.4 [ 62s] [218/287] installing patch-x86-arm-2.6.1.169-8.2 [ 63s] [219/287] installing sed-x86-arm-4.1.5-8.4 [ 63s] [220/287] installing diffutils-x86-arm-3.0-8.4 [ 63s] [221/287] installing libXtst-1.2.0-5.3 [ 63s] [222/287] installing autoconf-2.68-5.1 [ 63s] [223/287] installing coreutils-x86-arm-6.9-8.4 [ 66s] [224/287] installing efreet-1.7.1+svn.77412+build01r01-1.4 [ 66s] [225/287] installing file-x86-arm-5.04-8.4 [ 66s] [226/287] installing tar-x86-arm-1.17-8.4 [ 66s] [227/287] installing harfbuzz-0.9.7-4.4 [ 66s] [228/287] installing pango-1.26.1-5.4 [ 66s] [ 66s] (pango-querymodules:2392): GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0) [ 66s] [229/287] installing elfutils-x86-arm-0.152-8.7 [ 66s] [230/287] installing systemd-43-4.6 [ 67s] [231/287] installing libslp-utilx-0.1.16-1.4 [ 67s] [232/287] installing gcc-4.5.3-5.1 [ 67s] [233/287] installing rpm-libs-4.9.1-7.4 [ 67s] [234/287] installing harfbuzz-devel-0.9.7-4.4 [ 67s] [235/287] installing rpm-libs-x86-arm-4.9.1-8.4 [ 67s] [236/287] installing automake-1.11.1-7.1 [ 67s] [237/287] installing vconf-0.2.32-1.6 [ 67s] Failed to get D-Bus connection: No connection to service manager. [ 67s] warning: %post(vconf-0.2.32-1.6.armv7l) scriptlet failed, exit status 1 [ 67s] [238/287] installing gconf-dbus-2.16.0-4.5 [ 68s] [239/287] installing udev-182-8.1 [ 68s] Failed to get D-Bus connection: No connection to service manager. [ 68s] Failed to get D-Bus connection: No connection to service manager. [ 68s] Failed to get D-Bus connection: No connection to service manager. [ 68s] Failed to get D-Bus connection: No connection to service manager. [ 68s] [240/287] installing gcc-c++-4.5.3-5.1 [ 68s] [241/287] installing evas-1.7.1+svn.77561+build01r01-1.6 [ 68s] [242/287] installing ecore-x-1.7.1+svn.77580+build01r01-1.4 [ 68s] [243/287] installing gst-plugins-base-0.10.36-25.5 [ 68s] [244/287] installing rpm-build-4.9.1-7.4 [ 68s] [245/287] installing libudev-182-8.1 [ 68s] [246/287] installing libtool-2.2.6b-4.4 [ 68s] [247/287] installing sensor-0.5.26-1.3 [ 69s] [248/287] installing sysman-0.2.29-3.2 [ 69s] [249/287] installing ecore-imf-evas-1.7.1+svn.77580+build01r01-1.4 [ 69s] [250/287] installing ecore-input-evas-1.7.1+svn.77580+build01r01-1.4 [ 69s] [251/287] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.2 [ 70s] "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " [ 70s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 70s] cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory [ 70s] cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [ 70s] [252/287] installing evas-devel-1.7.1+svn.77561+build01r01-1.6 [ 70s] [253/287] installing ail-0.2.55-1.5 [ 70s] [AIL_INITDB][D][main,214] AIL_INITDB : 0 [ 70s] open log dev is failed [ 70s] [AIL_INITDB][E][initdb_load_directory,122] Failed to access the [/opt/share/applications] because No such file or directory [ 70s] [ 70s] [AIL_INITDB][E][main,224] cannot load opt desktop directory. [ 70s] /var/tmp/rpm-tmp.aZrGTG: line 23: chsmack: command not found [ 70s] warning: %post(ail-0.2.55-1.5.armv7l) scriptlet failed, exit status 127 [ 70s] [254/287] installing pkgmgr-info-parser-0.0.54-1.2 [ 70s] [255/287] installing rpm-x86-arm-4.9.1-8.4 [ 70s] /bin/rpm.orig-arm already present - skipping. [ 70s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 70s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 70s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 70s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 70s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 70s] [256/287] installing rpm-build-x86-arm-4.9.1-8.4 [ 71s] [257/287] installing cross-armv7l-binutils-accel-armv7l-2.22-1.3 [ 71s] mv: cannot stat `/usr/bin/gprov': No such file or directory [ 71s] [258/287] installing pkgmgr-info-0.0.54-1.2 [ 71s] [259/287] installing pulseaudio-2.1-2.1 [ 71s] [260/287] installing ecore-evas-1.7.1+svn.77580+build01r01-1.4 [ 72s] [261/287] installing pulseaudio-libs-2.1-2.1 [ 72s] [262/287] installing edbus-1.7.1+svn.76526+build01r01-1.4 [ 72s] [263/287] installing edje-1.7.1+svn.77330+build01r03-2.4 [ 72s] [264/287] installing ecore-devel-1.7.1+svn.77580+build01r01-1.4 [ 72s] [265/287] installing aul-0.0.240-2.10 [ 72s] warning: group app does not exist - using root [ 72s] warning: group app does not exist - using root [ 72s] Failed to get D-Bus connection: No connection to service manager. [ 72s] Failed to get D-Bus connection: No connection to service manager. [ 72s] Failed to get D-Bus connection: No connection to service manager. [ 72s] warning: %post(aul-0.0.240-2.10.armv7l) scriptlet failed, exit status 1 [ 72s] [266/287] installing efreet-devel-1.7.1+svn.77412+build01r01-1.4 [ 72s] [267/287] installing edbus-devel-1.7.1+svn.76526+build01r01-1.4 [ 72s] [268/287] installing edje-devel-1.7.1+svn.77330+build01r03-2.4 [ 72s] [269/287] installing avsystem-0.5.4-2.8 [ 72s] Failed to get D-Bus connection: No connection to service manager. [ 72s] Failed to get D-Bus connection: No connection to service manager. [ 72s] warning: %post(avsystem-0.5.4-2.8.armv7l) scriptlet failed, exit status 1 [ 72s] [270/287] installing ethumb-1.7.1+svn.75994+build01r01-1.3 [ 72s] [271/287] installing emotion-1.7.1+svn.76438+build01r01-1.4 [ 73s] [272/287] installing app-core-common-1.2-49.3 [ 73s] [273/287] installing app-svc-0.1.42-1.10 [ 73s] persist [ 73s] /var/tmp/rpm-tmp.HUibpl: line 11: chsmack: command not found [ 73s] /var/tmp/rpm-tmp.HUibpl: line 12: chsmack: command not found [ 73s] warning: %post(app-svc-0.1.42-1.10.armv7l) scriptlet failed, exit status 127 [ 73s] [274/287] installing emotion-devel-1.7.1+svn.76438+build01r01-1.4 [ 73s] [275/287] installing ethumb-devel-1.7.1+svn.75994+build01r01-1.3 [ 73s] [276/287] installing elementary-1.7.1+svn.77535+build01r05-2.3 [ 73s] [277/287] installing elementary-devel-1.7.1+svn.77535+build01r05-2.3 [ 73s] [278/287] installing app-core-efl-1.2-49.3 [ 73s] [279/287] installing wrt-commons-0.2.93-2.4 [ 75s] This is new install of wrt-commons [ 75s] Calling /usr/bin/wrt_commons_reset_db.sh [ 75s] /opt/dbspace/.wrt.db doesn't exist [ 75s] persist [ 75s] /usr/bin/wrt_commons_create_clean_db.sh: line 30: pkill: command not found [ 75s] persist [ 75s] /usr/bin/wrt_commons_create_clean_db.sh: line 30: pkill: command not found [ 75s] persist [ 75s] /usr/bin/wrt_commons_create_clean_db.sh: line 30: pkill: command not found [ 75s] Creating machine-id [ 75s] /var/tmp/rpm-tmp.XtLs0c: line 56: chsmack: command not found [ 75s] /var/tmp/rpm-tmp.XtLs0c: line 57: chsmack: command not found [ 75s] /var/tmp/rpm-tmp.XtLs0c: line 58: chsmack: command not found [ 75s] /var/tmp/rpm-tmp.XtLs0c: line 59: chsmack: command not found [ 75s] /var/tmp/rpm-tmp.XtLs0c: line 60: chsmack: command not found [ 75s] /var/tmp/rpm-tmp.XtLs0c: line 61: chsmack: command not found [ 75s] [WRT] wrt-commons postinst done ... [ 76s] [280/287] installing security-server-0.0.61-1.7 [ 76s] This is new install of wrt-security [ 76s] Calling /usr/bin/wrt_security_create_clean_db.sh [ 76s] persist [ 76s] [WRT] wrt-security postinst done ... [ 76s] [281/287] installing libsecurity-server-client-0.0.61-1.7 [ 76s] [282/287] installing audio-session-manager-0.2.7-1.9 [ 76s] open log dev is failed [ 76s] [283/287] installing libmm-session-0.2.7-1.4 [ 76s] [284/287] installing libmm-sound-0.7.2-3.8 [ 77s] open log dev is failed [ 77s] open log dev is failed [ 77s] open log dev is failed [ 77s] open log dev is failed [ 77s] open log dev is failed [ 77s] open log dev is failed [ 77s] open log dev is failed [ 77s] open log dev is failed [ 77s] open log dev is failed [ 77s] open log dev is failed [ 77s] [285/287] installing libmm-player-0.2.11-1.5 [ 77s] [286/287] installing tts-0.1.1-1.4 [ 77s] [287/287] installing tts-devel-0.1.1-1.4 [ 77s] now finalizing build dir... [ 77s] /.build/build: line 2585: mount: command not found [ 77s] /.build/build: line 2586: mount: command not found [ 77s] /.build/build: line 2680: //etc/passwd: No such file or directory [ 80s] build target is armv7l-tizen-linux [ 80s] ----------------------------------------------------------------- [ 80s] I have the following modifications for elm-modules.spec: [ 80s] 4c4 [ 80s] < Release: 1 [ 80s] --- [ 80s] > Release: 2.9 [ 80s] ----------------------------------------------------------------- [ 80s] ----- building elm-modules.spec (user abuild) [ 80s] ----------------------------------------------------------------- [ 80s] ----------------------------------------------------------------- [ 81s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://w08.vlan200.tizen.org/Tizen:2.0:Panda/standard/9cf585487e43abb6611cf5296fc21a39-elm-modules' /home/abuild/rpmbuild/SOURCES/elm-modules.spec [ 81s] Building target platforms: armv7l-tizen-linux [ 81s] Building for target armv7l-tizen-linux [ 81s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.yXylwX [ 81s] + umask 022 [ 81s] + cd /home/abuild/rpmbuild/BUILD [ 81s] + LANG=C [ 81s] + export LANG [ 81s] + unset DISPLAY [ 81s] + cd /home/abuild/rpmbuild/BUILD [ 81s] + rm -rf elm-modules-0.1.1 [ 81s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/elm-modules-0.1.1.tar.gz [ 81s] + /bin/tar -xf - [ 81s] + STATUS=0 [ 81s] + '[' 0 -ne 0 ']' [ 81s] + cd elm-modules-0.1.1 [ 81s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 81s] + exit 0 [ 81s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.ndU3aA [ 81s] + umask 022 [ 81s] + cd /home/abuild/rpmbuild/BUILD [ 81s] + cd elm-modules-0.1.1 [ 81s] + LANG=C [ 81s] + export LANG [ 81s] + unset DISPLAY [ 81s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 81s] + export CFLAGS [ 81s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 81s] + export CXXFLAGS [ 81s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 81s] + export FFLAGS [ 81s] + LD_AS_NEEDED=1 [ 81s] + export LD_AS_NEEDED [ 81s] + export 'CFLAGS+= -Wall -g -fPIC -rdynamic' [ 81s] + CFLAGS+=' -Wall -g -fPIC -rdynamic' [ 81s] + export 'LDFLAGS+= -Wl,--hash-style=both -Wl,--as-needed -Wl,--rpath=/usr/lib' [ 81s] + LDFLAGS+=' -Wl,--hash-style=both -Wl,--as-needed -Wl,--rpath=/usr/lib' [ 81s] + export 'CFLAGS+= -D_ENV_ARM' [ 81s] + CFLAGS+=' -D_ENV_ARM' [ 81s] + for FILE in access_output_tts [ 81s] + cd access_output_tts [ 81s] + ./autogen.sh [ 81s] + aclocal [ 96s] + autoconf [ 106s] + libtoolize --copy --force [ 106s] libtoolize: putting auxiliary files in `.'. [ 106s] libtoolize: copying file `./ltmain.sh' [ 107s] libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and [ 107s] libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. [ 107s] libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. [ 107s] + autoheader [ 110s] autoheader: error: AC_CONFIG_HEADERS not found in configure.ac [ 110s] + automake --foreign --add-missing --copy [ 114s] configure.ac:8: installing `./config.guess' [ 114s] configure.ac:8: installing `./config.sub' [ 114s] configure.ac:3: installing `./install-sh' [ 114s] configure.ac:3: installing `./missing' [ 114s] src/Makefile.am: installing `./depcomp' [ 115s] Makefile.am:7: user target `uninstall' defined here... [ 115s] /usr/share/automake-1.11/am/install.am: ... overrides Automake target `uninstall' defined here [ 115s] Makefile.am:7: consider using uninstall-local instead of uninstall [ 115s] + ./configure --prefix=/usr [ 115s] checking for a BSD-compatible install... /usr/bin/install -c [ 116s] checking whether build environment is sane... yes [ 116s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 116s] checking for gawk... gawk [ 116s] checking whether make sets $(MAKE)... yes [ 116s] checking for gcc... gcc [ 116s] checking whether the C compiler works... yes [ 116s] checking for C compiler default output file name... a.out [ 116s] checking for suffix of executables... [ 116s] checking whether we are cross compiling... no [ 117s] checking for suffix of object files... o [ 117s] checking whether we are using the GNU C compiler... yes [ 117s] checking whether gcc accepts -g... yes [ 117s] checking for gcc option to accept ISO C89... none needed [ 117s] checking for style of include used by make... GNU [ 117s] checking dependency style of gcc... gcc3 [ 117s] checking build system type... armv7l-unknown-linux-gnueabi [ 117s] checking host system type... armv7l-unknown-linux-gnueabi [ 117s] checking for a sed that does not truncate output... /bin/sed [ 117s] checking for grep that handles long lines and -e... /bin/grep [ 117s] checking for egrep... /bin/grep -E [ 117s] checking for fgrep... /bin/grep -F [ 117s] checking for ld used by gcc... /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld [ 117s] checking if the linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) is GNU ld... yes [ 117s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 117s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 117s] checking whether ln -s works... yes [ 117s] checking the maximum length of command line arguments... 1572864 [ 117s] checking whether the shell understands some XSI constructs... yes [ 117s] checking whether the shell understands "+="... yes [ 117s] checking for /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld option to reload object files... -r [ 117s] checking for objdump... objdump [ 117s] checking how to recognize dependent libraries... pass_all [ 117s] checking for ar... ar [ 117s] checking for strip... strip [ 117s] checking for ranlib... ranlib [ 117s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 117s] checking how to run the C preprocessor... gcc -E [ 117s] checking for ANSI C header files... yes [ 117s] checking for sys/types.h... yes [ 117s] checking for sys/stat.h... yes [ 117s] checking for stdlib.h... yes [ 117s] checking for string.h... yes [ 117s] checking for memory.h... yes [ 117s] checking for strings.h... yes [ 117s] checking for inttypes.h... yes [ 118s] checking for stdint.h... yes [ 118s] checking for unistd.h... yes [ 118s] checking for dlfcn.h... yes [ 118s] checking for objdir... .libs [ 118s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 118s] checking for gcc option to produce PIC... -fPIC -DPIC [ 118s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 118s] checking if gcc static flag -static works... no [ 118s] checking if gcc supports -c -o file.o... yes [ 118s] checking if gcc supports -c -o file.o... (cached) yes [ 118s] checking whether the gcc linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) supports shared libraries... yes [ 118s] checking whether -lc should be explicitly linked in... no [ 118s] checking dynamic linker characteristics... GNU/Linux ld.so [ 118s] checking how to hardcode library paths into programs... immediate [ 118s] checking whether stripping libraries is possible... yes [ 118s] checking if libtool supports shared libraries... yes [ 118s] checking whether to build shared libraries... yes [ 118s] checking whether to build static libraries... no [ 118s] checking for ANSI C header files... (cached) yes [ 118s] checking for an ANSI C-conforming const... yes [ 118s] checking for pkg-config... /usr/bin/pkg-config [ 118s] checking pkg-config is at least version 0.9.0... yes [ 118s] checking for ACCESS_OUTPUT... yes [ 118s] configure: creating ./config.status [ 119s] config.status: creating Makefile [ 119s] config.status: creating src/Makefile [ 119s] config.status: executing depfiles commands [ 119s] config.status: executing libtool commands [ 119s] + make [ 119s] Making all in src [ 119s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/elm-modules-0.1.1/access_output_tts/src' [ 119s] /bin/sh ../libtool --tag=CC --tag=disable-static --mode=compile gcc -DPACKAGE_NAME=\"elm-modules-access-output-tts\" -DPACKAGE_TARNAME=\"elm-modules-access-output-tts\" -DPACKAGE_VERSION=\"0.1\" -DPACKAGE_STRING=\"elm-modules-access-output-tts\ 0.1\" -DPACKAGE_BUGREPORT=\"cinoo.kim@samsung.com\" -DPACKAGE_URL=\"\" -DPACKAGE=\"elm-modules-access-output-tts\" -DVERSION=\"0.1\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DSTDC_HEADERS=1 -DMODULE_ARCH=\"linux-gnueabi-armv7l-1.7.99\" -I. -I. -I/usr/include/elementary-1 -I/usr/include/ethumb-1 -I/usr/include/efreet-1 -I/usr/include/e_dbus-1 -I/usr/include/ecore-1 -I/usr/include/emotion-1 -I/usr/include/edje-1 -I/usr/include/evas-1 -I/usr/include/eet-1 -I/usr/include/eina-1 -I/usr/include/eina-1/eina -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/pixman-1 -I/usr/include/harfbuzz -I/usr/include/fribidi -I/usr/include/freetype2 -I/usr/include/embryo-1 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -Wall -g -fPIC -rdynamic -D_ENV_ARM -MT module_la-mod.lo -MD -MP -MF .deps/module_la-mod.Tpo -c -o module_la-mod.lo `test -f 'mod.c' || echo './'`mod.c [ 119s] libtool: compile: gcc -DPACKAGE_NAME=\"elm-modules-access-output-tts\" -DPACKAGE_TARNAME=\"elm-modules-access-output-tts\" -DPACKAGE_VERSION=\"0.1\" "-DPACKAGE_STRING=\"elm-modules-access-output-tts 0.1\"" -DPACKAGE_BUGREPORT=\"cinoo.kim@samsung.com\" -DPACKAGE_URL=\"\" -DPACKAGE=\"elm-modules-access-output-tts\" -DVERSION=\"0.1\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DSTDC_HEADERS=1 -DMODULE_ARCH=\"linux-gnueabi-armv7l-1.7.99\" -I. -I. -I/usr/include/elementary-1 -I/usr/include/ethumb-1 -I/usr/include/efreet-1 -I/usr/include/e_dbus-1 -I/usr/include/ecore-1 -I/usr/include/emotion-1 -I/usr/include/edje-1 -I/usr/include/evas-1 -I/usr/include/eet-1 -I/usr/include/eina-1 -I/usr/include/eina-1/eina -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/pixman-1 -I/usr/include/harfbuzz -I/usr/include/fribidi -I/usr/include/freetype2 -I/usr/include/embryo-1 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -Wall -g -fPIC -rdynamic -D_ENV_ARM -MT module_la-mod.lo -MD -MP -MF .deps/module_la-mod.Tpo -c mod.c -fPIC -DPIC -o .libs/module_la-mod.o [ 119s] mv -f .deps/module_la-mod.Tpo .deps/module_la-mod.Plo [ 119s] /bin/sh ../libtool --tag=CC --tag=disable-static --mode=link gcc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -Wall -g -fPIC -rdynamic -D_ENV_ARM -no-undefined -module -avoid-version -Wl,--hash-style=both -Wl,--as-needed -Wl,--rpath=/usr/lib -o module.la -rpath /usr/lib/elementary/modules/access_output_tts/linux-gnueabi-armv7l-1.7.99 module_la-mod.lo -ltts [ 119s] libtool: link: gcc -shared .libs/module_la-mod.o -ltts -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -mthumb -Wl,--hash-style=both -Wl,--as-needed -Wl,--rpath=/usr/lib -Wl,-soname -Wl,module.so -o .libs/module.so [ 119s] libtool: link: ( cd ".libs" && rm -f "module.la" && ln -s "../module.la" "module.la" ) [ 119s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/elm-modules-0.1.1/access_output_tts/src' [ 119s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/elm-modules-0.1.1/access_output_tts' [ 119s] make[1]: Nothing to be done for `all-am'. [ 119s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/elm-modules-0.1.1/access_output_tts' [ 119s] + exit 0 [ 119s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.WkhwQx [ 119s] + umask 022 [ 119s] + cd /home/abuild/rpmbuild/BUILD [ 119s] + cd elm-modules-0.1.1 [ 119s] + LANG=C [ 119s] + export LANG [ 119s] + unset DISPLAY [ 119s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/elm-modules-0.1.1-2.9.arm [ 119s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/elm-modules-0.1.1-2.9.arm [ 119s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/elm-modules-0.1.1-2.9.arm [ 119s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/elm-modules-0.1.1-2.9.arm/usr/share/license [ 119s] + cp /home/abuild/rpmbuild/BUILD/elm-modules-0.1.1/COPYING /home/abuild/rpmbuild/BUILDROOT/elm-modules-0.1.1-2.9.arm/usr/share/license/elm-modules [ 119s] + for FILE in access_output_tts [ 119s] + cd access_output_tts [ 119s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/elm-modules-0.1.1-2.9.arm [ 119s] Making install in src [ 119s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/elm-modules-0.1.1/access_output_tts/src' [ 119s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/elm-modules-0.1.1/access_output_tts/src' [ 119s] make[2]: Nothing to be done for `install-exec-am'. [ 119s] test -z "/usr/lib/elementary/modules/access_output_tts/linux-gnueabi-armv7l-1.7.99" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/elm-modules-0.1.1-2.9.arm/usr/lib/elementary/modules/access_output_tts/linux-gnueabi-armv7l-1.7.99" [ 119s] /bin/sh ../libtool --mode=install /usr/bin/install -c module.la '/home/abuild/rpmbuild/BUILDROOT/elm-modules-0.1.1-2.9.arm/usr/lib/elementary/modules/access_output_tts/linux-gnueabi-armv7l-1.7.99' [ 119s] libtool: install: /usr/bin/install -c .libs/module.so /home/abuild/rpmbuild/BUILDROOT/elm-modules-0.1.1-2.9.arm/usr/lib/elementary/modules/access_output_tts/linux-gnueabi-armv7l-1.7.99/module.so [ 119s] libtool: install: /usr/bin/install -c .libs/module.lai /home/abuild/rpmbuild/BUILDROOT/elm-modules-0.1.1-2.9.arm/usr/lib/elementary/modules/access_output_tts/linux-gnueabi-armv7l-1.7.99/module.la [ 119s] libtool: install: warning: remember to run `libtool --finish /usr/lib/elementary/modules/access_output_tts/linux-gnueabi-armv7l-1.7.99' [ 119s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/elm-modules-0.1.1/access_output_tts/src' [ 119s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/elm-modules-0.1.1/access_output_tts/src' [ 119s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/elm-modules-0.1.1/access_output_tts' [ 119s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/elm-modules-0.1.1/access_output_tts' [ 119s] make[2]: Nothing to be done for `install-exec-am'. [ 119s] make[2]: Nothing to be done for `install-data-am'. [ 119s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/elm-modules-0.1.1/access_output_tts' [ 119s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/elm-modules-0.1.1/access_output_tts' [ 119s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/elm-modules-0.1.1 [ 119s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/elm-modules-0.1.1-2.9.arm/usr/lib/elementary/modules/access_output_tts/linux-gnueabi-armv7l-1.7.99/module.so [ 119s] 5 blocks [ 119s] + /usr/lib/rpm/check-buildroot [ 120s] + /usr/lib/rpm//brp-compress [ 120s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 120s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 120s] + /usr/lib/rpm/brp-python-bytecompile [ 120s] + /usr/lib/rpm/brp-python-hardlink [ 120s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/elm-modules-0.1.1-2.9.arm [ 120s] Processing files: elm-modules-0.1.1-2.9.armv7l [ 120s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl [ 120s] cXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 120s] [ 120s] Provides: module.so [ 120s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 120s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libtts.so [ 120s] Processing files: elm-modules-debuginfo-0.1.1-2.9.armv7l [ 120s] Processing files: elm-modules-debugsource-0.1.1-2.9.armv7l [ 120s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/elm-modules-0.1.1-2.9.arm [ 120s] Wrote: /home/abuild/rpmbuild/SRPMS/elm-modules-0.1.1-2.9.src.rpm [ 120s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/elm-modules-0.1.1-2.9.armv7l.rpm [ 120s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/elm-modules-debuginfo-0.1.1-2.9.armv7l.rpm [ 120s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/elm-modules-debugsource-0.1.1-2.9.armv7l.rpm [ 120s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.F2TdDv [ 120s] + umask 022 [ 120s] + cd /home/abuild/rpmbuild/BUILD [ 120s] + cd elm-modules-0.1.1 [ 120s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/elm-modules-0.1.1-2.9.arm [ 120s] + exit 0 [ 120s] ... checking for files with abuild user/group [ 120s] ... creating baselibs [ 121s] ... comparing built packages with the former built [ 121s] /usr/lib/build/rpm-check.sh [ 121s] compare /.build.oldpackages/elm-modules-0.1.1-2.8.src.rpm /home/abuild/rpmbuild/SRPMS/elm-modules-0.1.1-2.9.src.rpm [ 121s] compare /.build.oldpackages/elm-modules-0.1.1-2.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/elm-modules-0.1.1-2.9.armv7l.rpm [ 121s] --- /tmp/tmp.DoQgNC738h 2013-10-11 02:22:48.348936747 +0000 [ 121s] +++ /tmp/tmp.OBLZ1Fcb8a 2013-10-11 02:22:48.356936752 +0000 [ 121s] @@ -1,7 +1,7 @@ [ 121s] elm-modules 0.1.1 (none) [ 121s] The Elementary Modules [ 121s] The Eelementary Modules [ 121s] - tizen Tizen:2.0:Panda obs://w10.vlan200.tizen.org/Tizen:2.0:Panda/standard/9cf585487e43abb6611cf5296fc21a39-elm-modules LGPLv2.1 LGPLv2.1 [ 121s] + tizen Tizen:2.0:Panda obs://w08.vlan200.tizen.org/Tizen:2.0:Panda/standard/9cf585487e43abb6611cf5296fc21a39-elm-modules LGPLv2.1 LGPLv2.1 [ 121s] System/Libraries (none) (none) (none) (none) [ 121s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 121s] cpio gzip 9 [ 121s] RPM meta information is different [ 121s] compare /.build.oldpackages/elm-modules-debuginfo-0.1.1-2.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/elm-modules-debuginfo-0.1.1-2.9.armv7l.rpm [ 121s] --- /tmp/tmp.VqaeyNdwcn 2013-10-11 02:22:48.400936750 +0000 [ 121s] +++ /tmp/tmp.hz6uRQkRTi 2013-10-11 02:22:48.408936746 +0000 [ 121s] @@ -3,7 +3,7 @@ [ 121s] This package provides debug information for package elm-modules. [ 121s] Debug information is useful when developing applications that use this [ 121s] package or when debugging this package. [ 121s] - tizen Tizen:2.0:Panda obs://w10.vlan200.tizen.org/Tizen:2.0:Panda/standard/9cf585487e43abb6611cf5296fc21a39-elm-modules LGPLv2.1 LGPLv2.1 [ 121s] + tizen Tizen:2.0:Panda obs://w08.vlan200.tizen.org/Tizen:2.0:Panda/standard/9cf585487e43abb6611cf5296fc21a39-elm-modules LGPLv2.1 LGPLv2.1 [ 121s] Development/Debug (none) (none) (none) (none) [ 121s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 121s] cpio gzip 9 [ 121s] RPM meta information is different [ 121s] compare /.build.oldpackages/elm-modules-debugsource-0.1.1-2.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/elm-modules-debugsource-0.1.1-2.9.armv7l.rpm [ 121s] --- /tmp/tmp.4DLvPSyeHJ 2013-10-11 02:22:48.448936752 +0000 [ 121s] +++ /tmp/tmp.BAmCZHK4xI 2013-10-11 02:22:48.460936754 +0000 [ 121s] @@ -3,7 +3,7 @@ [ 121s] This package provides debug sources for package elm-modules. [ 121s] Debug sources are useful when developing applications that use this [ 121s] package or when debugging this package. [ 121s] - tizen Tizen:2.0:Panda obs://w10.vlan200.tizen.org/Tizen:2.0:Panda/standard/9cf585487e43abb6611cf5296fc21a39-elm-modules LGPLv2.1 LGPLv2.1 [ 121s] + tizen Tizen:2.0:Panda obs://w08.vlan200.tizen.org/Tizen:2.0:Panda/standard/9cf585487e43abb6611cf5296fc21a39-elm-modules LGPLv2.1 LGPLv2.1 [ 121s] Development/Debug (none) (none) (none) (none) [ 121s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 121s] cpio gzip 9 [ 121s] RPM meta information is different [ 121s] ... saving built statistics [ 121s] /.build/build: line 3144: mount: command not found [ 121s] ERROR: no root disk device found, yet another new device name? [ 121s] ls: cannot access /sys/block/: No such file or directory [ 121s] umount: /sys: not mounted [ 121s] ... saving built packages [ 121s] /home/abuild/rpmbuild/RPMS/armv7l/elm-modules-0.1.1-2.9.armv7l.rpm [ 121s] /home/abuild/rpmbuild/RPMS/armv7l/elm-modules-debuginfo-0.1.1-2.9.armv7l.rpm [ 121s] /home/abuild/rpmbuild/RPMS/armv7l/elm-modules-debugsource-0.1.1-2.9.armv7l.rpm [ 121s] /home/abuild/rpmbuild/SRPMS/elm-modules-0.1.1-2.9.src.rpm [ 121s] /home/abuild/rpmbuild/OTHER/_statistics [ 121s] [ 121s] w08 finished "build elm-modules.spec" at Fri Oct 11 02:22:48 UTC 2013. [ 121s] [ 122s] /.build/build: line 391: mount: command not found [ 127s] Warning: VM doesn't support sysrq and /sbin/halt not installed [ 127s] Warning: clean shut down of the VM didn't work [ 128s] [ 120.141252] Kernel panic - not syncing: Attempted to kill init! [ 128s] [ 120.141689] Pid: 1, comm: qemu-arm Not tainted 3.1.9-1.4-default #1 [ 128s] [ 120.142315] Call Trace: [ 128s] [ 120.142585] [] dump_trace+0x9a/0x270 [ 128s] [ 120.143151] [] dump_stack+0x69/0x6f [ 128s] [ 120.143760] [] panic+0x95/0x1a9 [ 128s] [ 120.144304] [] forget_original_parent+0x244/0x250 [ 128s] [ 120.144985] [] exit_notify+0x10/0x160 [ 128s] [ 120.145555] [] do_exit+0x1dd/0x410 [ 128s] [ 120.146101] [] do_group_exit+0x41/0xb0 [ 128s] [ 120.146679] [] sys_exit_group+0x12/0x20 [ 128s] [ 120.147268] [] system_call_fastpath+0x16/0x1b [ 128s] [ 120.147958] [<00000000601208d9>] 0x601208d8 [ 142s] [ 120.148580] Rebooting in 1 seconds..build: extracting built packages... [ 142s] elm-modules-0.1.1-2.9.armv7l.rpm [ 142s] elm-modules-debuginfo-0.1.1-2.9.armv7l.rpm [ 142s] elm-modules-debugsource-0.1.1-2.9.armv7l.rpm [ 142s] elm-modules-0.1.1-2.9.src.rpm [ 142s] _statistics