[ 0s] Using BUILD_ROOT=/srv/build/root_4/.mount [ 0s] Using BUILD_ARCH=armv7el [ 0s] Doing kvm build in /srv/build/root_4/root [ 0s] [ 0s] [ 0s] w05 started "build python-pycurl.spec" at Thu Oct 10 21:44:26 UTC 2013. [ 0s] [ 0s] Building python-pycurl for project 'Tizen:2.0:Panda' repository 'standard' arch 'armv7el' srcmd5 'e467ea3c0a9352929f8c912112f88a56' [ 0s] [ 0s] processing specfile /srv/build/root_4/.build-srcdir/python-pycurl.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_4/.build-srcdir/python-pycurl.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/4/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_4/.build.rpmlist /srv/build/root_4/.build-srcdir/python-pycurl.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 41: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 44: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 45: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 48: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 51: echo: write error: Invalid argument [ 0s] Please check cpu value and header information for m68k! [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 55: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 59: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 60: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 61: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 62: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 63: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 64: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 67: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 68: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 71: echo: write error: Invalid argument [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc-common -> eglibc [ 0s] cycle: libgcc -> eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: libgcc -> eglibc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm -> rpm-libs [ 0s] [1/56] preinstalling libgcc... [ 0s] [2/56] preinstalling setup... [ 0s] [3/56] preinstalling filesystem... [ 0s] [4/56] preinstalling eglibc... [ 0s] [5/56] preinstalling eglibc-common... [ 1s] [6/56] preinstalling bash... [ 1s] [7/56] preinstalling bzip2-libs... [ 1s] [8/56] preinstalling diffutils... [ 1s] [9/56] preinstalling elfutils-libelf... [ 1s] [10/56] preinstalling libattr... [ 1s] [11/56] preinstalling liblua... [ 1s] [12/56] preinstalling libstdc++... [ 1s] [13/56] preinstalling ncurses-libs... [ 1s] [14/56] preinstalling nspr... [ 1s] [15/56] preinstalling nss-softokn-freebl... [ 1s] [16/56] preinstalling popt... [ 1s] [17/56] preinstalling readline... [ 1s] [18/56] preinstalling sed... [ 1s] [19/56] preinstalling sqlite... [ 1s] [20/56] preinstalling xz-libs... [ 1s] [21/56] preinstalling zlib... [ 1s] [22/56] preinstalling qemu.x86_64... [ 2s] [23/56] preinstalling libcap... [ 2s] [24/56] preinstalling libacl... [ 2s] [25/56] preinstalling libfile... [ 2s] [26/56] preinstalling bzip2... [ 2s] [27/56] preinstalling nss... [ 2s] [28/56] preinstalling tar... [ 2s] [29/56] preinstalling coreutils... [ 2s] [30/56] preinstalling file... [ 13s] [31/56] preinstalling rpm... [ 13s] [32/56] preinstalling tizen-accelerator... [ 13s] [33/56] preinstalling rpm-libs... [ 13s] [34/56] preinstalling gmp-x86-arm... [ 13s] [35/56] preinstalling mpc-x86-arm... [ 13s] [36/56] preinstalling mpfr-x86-arm... [ 13s] [37/56] preinstalling bzip2-libs-x86-arm... [ 13s] [38/56] preinstalling eglibc-x86-arm... [ 13s] [39/56] preinstalling elfutils-libelf-x86-arm... [ 13s] [40/56] preinstalling libacl-x86-arm... [ 13s] [41/56] preinstalling libattr-x86-arm... [ 13s] [42/56] preinstalling libcap-x86-arm... [ 13s] [43/56] preinstalling libfile-x86-arm... [ 13s] [44/56] preinstalling libgcc-x86-arm... [ 13s] [45/56] preinstalling liblua-x86-arm... [ 13s] [46/56] preinstalling ncurses-libs-x86-arm... [ 13s] [47/56] preinstalling nspr-x86-arm... [ 13s] [48/56] preinstalling nss-softokn-freebl-x86-arm... [ 13s] [49/56] preinstalling nss-x86-arm... [ 13s] [50/56] preinstalling popt-x86-arm... [ 13s] [51/56] preinstalling rpm-libs-x86-arm... [ 13s] [52/56] preinstalling sqlite-x86-arm... [ 13s] [53/56] preinstalling xz-libs-x86-arm... [ 13s] [54/56] preinstalling zlib-x86-arm... [ 13s] [55/56] preinstalling bash-x86-arm... [ 13s] [56/56] preinstalling rpm-x86-arm... [ 13s] [ 13s] cycle: perl -> perl-libs [ 13s] breaking dependency perl-libs -> perl [ 13s] [1/8] preinstalling e2fsprogs-libs... [ 13s] [2/8] preinstalling libpcre... [ 13s] [3/8] preinstalling libuuid... [ 13s] [4/8] preinstalling grep... [ 13s] [5/8] preinstalling libblkid... [ 13s] [6/8] preinstalling util-linux... [ 13s] [7/8] preinstalling perl-libs... [ 13s] [8/8] preinstalling perl... [ 13s] copying packages... [ 13s] reordering...cycle: bash -> eglibc -> eglibc-common [ 13s] breaking dependency eglibc-common -> bash [ 13s] cycle: eglibc -> eglibc-common [ 13s] breaking dependency eglibc-common -> eglibc [ 13s] cycle: eglibc -> eglibc-common -> libgcc [ 13s] breaking dependency eglibc -> eglibc-common [ 13s] cycle: eglibc -> libgcc [ 13s] breaking dependency libgcc -> eglibc [ 13s] cycle: filesystem -> setup [ 13s] breaking dependency setup -> filesystem [ 13s] cycle: ncurses -> ncurses-libs [ 13s] breaking dependency ncurses-libs -> ncurses [ 13s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 13s] breaking dependency ncurses-libs -> ncurses-base [ 13s] cycle: perl -> perl-libs [ 13s] breaking dependency perl -> perl-libs [ 13s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 13s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 13s] cycle: perl -> perl-IO-Compress-Zlib [ 13s] breaking dependency perl -> perl-IO-Compress-Zlib [ 13s] cycle: perl -> perl-IO-Compress-Base [ 13s] breaking dependency perl -> perl-IO-Compress-Base [ 13s] cycle: perl -> perl-Module-Pluggable [ 13s] breaking dependency perl -> perl-Module-Pluggable [ 13s] cycle: perl -> perl-Pod-Simple [ 13s] breaking dependency perl -> perl-Pod-Simple [ 13s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 13s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 13s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 13s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 13s] cycle: nss -> nss-sysinit [ 13s] breaking dependency nss -> nss-sysinit [ 13s] cycle: perl-CPAN -> perl-Test-Harness [ 13s] breaking dependency perl-Test-Harness -> perl-CPAN [ 13s] cycle: rpm-libs -> rpm [ 13s] breaking dependency rpm -> rpm-libs [ 13s] done [ 37s] booting kvm ... [ 37s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/kernel/vmlinuz -initrd /srv/kernel/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8192 -drive file=/srv/build/root_4/root,if=virtio,cache=unsafe -drive file=/srv/build/root_4/root,if=ide,index=0,cache=unsafe -drive file=/srv/build/root_4/swap,if=virtio,cache=unsafe -smp 4 [ 38s]  [ 38s] Google, Inc. [ 38s] Serial Graphics Adapter 09/05/12 [ 38s] SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ (abuild@build24) Wed Sep 5 14:01:11 UTC 2012 [ 38s] Term: 80x24 [ 38s] 4 0 [ 38s]  SeaBIOS (version 1.6.3-20120905_140109) [ 38s] [ 38s] Booting from ROM... [ 41s] doing fast boot [ 41s] Creating device nodes with udev [ 41s] udevd[203]: failed to execute '/etc/sysconfig/network/scripts/ifup-sysctl' '/etc/sysconfig/network/scripts/ifup-sysctl lo -o hotplug': No such file or directory [ 41s] [ 41s] Waiting for device /dev/vda to appear: ok [ 41s] fsck from util-linux 2.20.1 [ 41s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 41s] /dev/vda: clean, 9409/2097152 files, 265043/8388608 blocks [ 41s] fsck succeeded. Mounting root device read-write. [ 41s] Mounting root /dev/vda [ 41s] mount -o rw,noatime,acl,user_xattr -t ext4 /dev/vda /root [ 41s] replacing /etc/mtab with symlink to /proc/self/mounts [ 42s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 42s] 2nd stage started in virtual machine [ 42s] machine type: armv7l [ 42s] switching personality to 8... [ 42s] 2nd stage started in virtual machine [ 42s] machine type: armv7l [ 42s] /.build/build: line 770: mount: command not found [ 43s] swapon on /dev/vdb [ 43s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 43s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 43s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 43s] logging output to //.build.log... [ 43s] processing specfile /.build-srcdir/python-pycurl.spec ... [ 43s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/python-pycurl.spec build rpmlint-Factory ... [ 43s] running rpm-x86-arm postinstall script [ 44s] running rpm-libs-x86-arm postinstall script [ 44s] running tizen-accelerator postinstall script [ 44s] running bash-x86-arm postinstall script [ 44s] initializing rpm db... [ 49s] [1/150] installing kernel-headers-2.6.36-5.1 [ 49s] [2/150] installing tizen-release-2.0.0-2.4 [ 49s] [3/150] installing tzdata-2011h-4.2 [ 49s] [4/150] installing libgcc-4.5.3-5.1 [ 49s] [5/150] installing setup-0.1-5.1 [ 49s] [6/150] installing filesystem-0.1-5.1 [ 50s] warning: group lock does not exist - using root [ 50s] warning: group mail does not exist - using root [ 50s] [7/150] installing eglibc-2.13-5.1 [ 50s] [8/150] installing eglibc-common-2.13-5.1 [ 60s] [9/150] installing bash-4.1-6.3 [ 60s] [10/150] installing bzip2-libs-1.0.5-8.1 [ 60s] [11/150] installing cpio-2.8-7.1 [ 60s] [12/150] installing diffutils-3.0-6.2 [ 60s] [13/150] installing e2fsprogs-libs-1.41.11-3.2 [ 60s] [14/150] installing elfutils-libelf-0.152-5.1 [ 60s] [15/150] installing fdupes-1.40-46.1 [ 60s] [16/150] installing findutils-4.2.31-5.1 [ 60s] [17/150] installing gdbm-1.8.3-5.1 [ 60s] [18/150] installing libattr-2.4.44-12.4 [ 61s] [19/150] installing libgomp-4.5.3-5.1 [ 61s] [20/150] installing libidn-1.15-9.4 [ 61s] [21/150] installing liblua-5.1.4-9.3 [ 61s] [22/150] installing libstdc++-4.5.3-5.1 [ 61s] [23/150] installing libuuid-2.20.2-4.3 [ 61s] [24/150] installing lzo-2.03-5.1 [ 61s] [25/150] installing m4-1.4.14-5.1 [ 61s] [26/150] installing make-3.81-5.1 [ 61s] [27/150] installing net-tools-1.60-90.3 [ 61s] [28/150] installing nspr-4.8.7-4.4 [ 62s] [29/150] installing nss-softokn-freebl-3.12.9-6.4 [ 62s] [30/150] installing patch-2.6.1.169-5.1 [ 62s] [31/150] installing pkgconfig-0.25-6.1 [ 62s] [32/150] installing popt-1.16-6.3 [ 62s] [33/150] installing readline-5.2-17.4 [ 62s] [34/150] installing sed-4.1.5-5.2 [ 62s] [35/150] installing sqlite-3.7.9-4.4 [ 62s] [36/150] installing xz-libs-5.0.3-4.3 [ 62s] [37/150] installing zlib-1.2.5-6.3 [ 63s] [38/150] installing ncurses-libs-5.7-7.4 [ 63s] [39/150] installing build-compare-2009.10.14-30.1 [ 63s] [40/150] installing libstdc++-devel-4.5.3-5.1 [ 63s] [41/150] installing qemu.x86_64-1.2-2.3 [ 64s] [42/150] installing eglibc-headers-2.13-5.1 [ 64s] [43/150] installing libcap-2.21-4.3 [ 64s] [44/150] installing unzip-6.0-12.4 [ 65s] [45/150] installing zlib-devel-1.2.5-6.3 [ 65s] [46/150] installing c-ares-1.7.4-6.1 [ 65s] [47/150] installing gmp-5.0.1-5.1 [ 65s] [48/150] installing libacl-2.2.49-4.3 [ 65s] [49/150] installing libfile-5.04-5.1 [ 65s] [50/150] installing libpcre-7.9-3.1 [ 65s] [51/150] installing libpython-2.7.1-5.1 [ 65s] [52/150] installing lzo-minilzo-2.03-5.1 [ 65s] [53/150] installing ncurses-5.7-7.4 [ 66s] [54/150] installing openssl-1.0.1c-4.4 [ 66s] [55/150] installing binutils-2.21.51.20110421-6.1 [ 66s] [56/150] installing bzip2-1.0.5-8.1 [ 66s] [57/150] installing libblkid-2.20.2-4.3 [ 66s] [58/150] installing xz-5.0.3-4.3 [ 66s] [59/150] installing elfutils-libs-0.152-5.1 [ 66s] [60/150] installing nss-3.12.9-6.4 [ 66s] [61/150] installing perl-5.12.1-62.1 [ 67s] [62/150] installing ncurses-base-5.7-7.4 [ 67s] [63/150] installing perl-HTML-Tagset-3.20-10.3 [ 68s] [64/150] installing perl-IO-Compress-Base-2.008-62.1 [ 68s] [65/150] installing perl-Module-Pluggable-3.60-62.1 [ 68s] [66/150] installing perl-Pod-Escapes-1.04-62.1 [ 68s] [67/150] installing perl-TimeDate-1.20-3.3 [ 68s] [68/150] installing c-ares-devel-1.7.4-6.1 [ 68s] [69/150] installing eglibc-devel-2.13-5.1 [ 68s] [70/150] installing openssl-devel-1.0.1c-4.4 [ 68s] [71/150] installing grep-2.5.1a-65.2 [ 68s] [72/150] installing lzo-devel-2.03-5.1 [ 68s] [73/150] installing mpfr-3.0.0-4.4 [ 68s] [74/150] installing perl-Compress-Raw-Zlib-2.008-62.1 [ 69s] [75/150] installing perl-devel-5.12.1-62.1 [ 69s] [76/150] installing perl-libs-5.12.1-62.1 [ 69s] [77/150] installing tar-1.17-7.1 [ 69s] [78/150] installing coreutils-6.9-13.1 [ 69s] [79/150] installing file-5.04-5.1 [ 69s] [80/150] installing libmount-2.20.2-4.3 [ 69s] [81/150] installing xz-lzma-compat-5.0.3-4.3 [ 69s] [82/150] installing elfutils-0.152-5.1 [ 69s] [83/150] installing nss-sysinit-3.12.9-6.4 [ 70s] [84/150] installing python-base-2.7.1-5.1 [ 70s] [85/150] installing libcurl-7.21.3-8.4 [ 70s] [86/150] installing perl-ExtUtils-ParseXS-2.18-62.1 [ 70s] [87/150] installing perl-Pod-Simple-3.07-62.1 [ 70s] [88/150] installing perl-Test-Simple-0.80-62.1 [ 70s] [89/150] installing tizen-accelerator-1.0.1-5.1 [ 71s] [90/150] installing libidn-devel-1.15-9.4 [ 71s] [91/150] installing perl-IO-Compress-Zlib-2.008-62.1 [ 71s] [92/150] installing perl-Test-Harness-3.12-62.1 [ 71s] [93/150] installing gawk-3.1.5-4.4 [ 71s] [94/150] installing gzip-1.3.14-6.1 [ 71s] [95/150] installing mpc-0.9-5.4 [ 71s] [96/150] installing build-2011.01.10a-5.1 [ 71s] [97/150] installing python-devel-2.7.1-5.1 [ 75s] [98/150] installing curl-7.21.3-8.4 [ 75s] [99/150] installing util-linux-2.20.2-4.3 [ 75s] warning: group tty does not exist - using root [ 75s] /bin/chown: `root:root': invalid user [ 75s] [100/150] installing bzip2-libs-x86-arm-1.0.5-8.4 [ 75s] [101/150] installing eglibc-x86-arm-2.13-8.5 [ 76s] [102/150] installing elfutils-libelf-x86-arm-0.152-8.4 [ 76s] [103/150] installing elfutils-libs-x86-arm-0.152-8.7 [ 76s] [104/150] installing gmp-x86-arm-5.0.1-8.4 [ 76s] [105/150] installing libacl-x86-arm-2.2.49-8.4 [ 76s] [106/150] installing libattr-x86-arm-2.4.44-8.4 [ 77s] [107/150] installing libcap-x86-arm-2.21-8.4 [ 77s] [108/150] installing libfile-x86-arm-5.04-8.4 [ 77s] [109/150] installing libgcc-x86-arm-4.5.3-8.4 [ 77s] [110/150] installing liblua-x86-arm-5.1.4-8.4 [ 77s] [111/150] installing mpc-x86-arm-0.9-8.4 [ 78s] [112/150] installing mpfr-x86-arm-3.0.0-8.4 [ 78s] [113/150] installing ncurses-libs-x86-arm-5.7-8.4 [ 78s] [114/150] installing nspr-x86-arm-4.8.7-8.7 [ 78s] [115/150] installing nss-softokn-freebl-x86-arm-3.12.9-8.7 [ 78s] [116/150] installing nss-x86-arm-3.12.9-8.7 [ 79s] [117/150] installing perl-ExtUtils-MakeMaker-6.36-62.1 [ 79s] [118/150] installing popt-x86-arm-1.16-8.4 [ 79s] [119/150] installing sqlite-x86-arm-3.7.13-8.4 [ 79s] [120/150] installing xz-libs-x86-arm-5.0.3-8.4 [ 79s] [121/150] installing zlib-x86-arm-1.2.5-8.4 [ 79s] [122/150] installing libcurl-devel-7.21.3-8.4 [ 83s] [123/150] installing cpp-4.5.3-5.1 [ 83s] [124/150] installing rpm-4.9.1-7.4 [ 83s] [125/150] installing perl-CPAN-1.9205-62.1 [ 83s] [126/150] installing bash-x86-arm-4.1-8.2 [ 84s] [127/150] installing fdupes-x86-arm-1.40-8.4 [ 84s] [128/150] installing findutils-x86-arm-4.2.31-8.4 [ 84s] [129/150] installing gawk-x86-arm-3.1.5-8.4 [ 84s] [130/150] installing gzip-x86-arm-1.3.14-8.4 [ 84s] [131/150] installing make-x86-arm-3.81-8.4 [ 84s] [132/150] installing patch-x86-arm-2.6.1.169-8.2 [ 84s] [133/150] installing sed-x86-arm-4.1.5-8.4 [ 85s] [134/150] installing diffutils-x86-arm-3.0-8.4 [ 85s] [135/150] installing autoconf-2.68-5.1 [ 85s] [136/150] installing coreutils-x86-arm-6.9-8.4 [ 87s] [137/150] installing file-x86-arm-5.04-8.4 [ 87s] [138/150] installing tar-x86-arm-1.17-8.4 [ 87s] [139/150] installing elfutils-x86-arm-0.152-8.7 [ 88s] [140/150] installing gcc-4.5.3-5.1 [ 96s] [141/150] installing rpm-libs-4.9.1-7.4 [ 104s] [142/150] installing rpm-libs-x86-arm-4.9.1-8.4 [ 104s] [143/150] installing automake-1.11.1-7.1 [ 104s] [144/150] installing gcc-c++-4.5.3-5.1 [ 104s] [145/150] installing rpm-build-4.9.1-7.4 [ 104s] [146/150] installing libtool-2.2.6b-4.4 [ 104s] [147/150] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.2 [ 104s] "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " [ 104s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 104s] cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory [ 104s] cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [ 104s] [148/150] installing rpm-x86-arm-4.9.1-8.4 [ 104s] /bin/rpm.orig-arm already present - skipping. [ 104s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 104s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 104s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 104s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 104s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 104s] [149/150] installing rpm-build-x86-arm-4.9.1-8.4 [ 104s] [150/150] installing cross-armv7l-binutils-accel-armv7l-2.22-1.3 [ 104s] mv: cannot stat `/usr/bin/gprov': No such file or directory [ 104s] now finalizing build dir... [ 104s] /.build/build: line 2585: mount: command not found [ 104s] /.build/build: line 2586: mount: command not found [ 104s] /.build/build: line 2680: //etc/passwd: No such file or directory [ 104s] Warning: spec file parser line 30: can't expand %(...) [ 104s] Warning: spec file parser line 66: can't expand %(...) [ 104s] Warning: spec file parser line 67: can't expand %(...) [ 104s] build target is armv7l-tizen-linux [ 104s] ----------------------------------------------------------------- [ 104s] I have the following modifications for python-pycurl.spec: [ 104s] 5c5 [ 104s] < Release: 4 [ 104s] --- [ 104s] > Release: 6.1 [ 104s] 67a68 [ 104s] > %changelog [ 104s] ----------------------------------------------------------------- [ 104s] ----- building python-pycurl.spec (user abuild) [ 104s] ----------------------------------------------------------------- [ 104s] ----------------------------------------------------------------- [ 104s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://w05.vlan200.tizen.org/Tizen:2.0:Panda/standard/e467ea3c0a9352929f8c912112f88a56-python-pycurl' /home/abuild/rpmbuild/SOURCES/python-pycurl.spec [ 104s] Building target platforms: armv7l-tizen-linux [ 104s] Building for target armv7l-tizen-linux [ 104s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.3nkfhb [ 104s] + umask 022 [ 104s] + cd /home/abuild/rpmbuild/BUILD [ 104s] + LANG=C [ 104s] + export LANG [ 104s] + unset DISPLAY [ 104s] + cd /home/abuild/rpmbuild/BUILD [ 104s] + rm -rf python-pycurl-7.19.0 [ 104s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/python-pycurl-7.19.0.tar.gz [ 104s] + /bin/tar -xf - [ 104s] + STATUS=0 [ 104s] + '[' 0 -ne 0 ']' [ 104s] + cd python-pycurl-7.19.0 [ 104s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 104s] + echo 'Patch #0 (python-pycurl-no-static-libs.patch):' [ 104s] Patch #0 (python-pycurl-no-static-libs.patch): [ 104s] + /usr/bin/patch -s -p0 --fuzz=2 [ 104s] + /bin/cat /home/abuild/rpmbuild/SOURCES/python-pycurl-no-static-libs.patch [ 104s] + echo 'Patch #1 (python-pycurl-lcrypto.patch):' [ 104s] Patch #1 (python-pycurl-lcrypto.patch): [ 104s] + /bin/cat /home/abuild/rpmbuild/SOURCES/python-pycurl-lcrypto.patch [ 104s] + /usr/bin/patch -s -p1 -b --suffix .lcrypto --fuzz=2 [ 104s] + chmod a-x examples/basicfirst.py examples/file_upload.py examples/linksys.py examples/retriever-multi.py examples/retriever.py examples/sfquery.py examples/xmlrpc_curl.py [ 104s] + exit 0 [ 104s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.iVGfMc [ 104s] + umask 022 [ 104s] + cd /home/abuild/rpmbuild/BUILD [ 104s] + cd python-pycurl-7.19.0 [ 104s] + LANG=C [ 104s] + export LANG [ 104s] + unset DISPLAY [ 104s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 104s] + export CFLAGS [ 104s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 104s] + export CXXFLAGS [ 104s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 104s] + export FFLAGS [ 104s] + LD_AS_NEEDED=1 [ 104s] + export LD_AS_NEEDED [ 104s] + cp /home/abuild/rpmbuild/SOURCES/python-pycurl.manifest . [ 104s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DHAVE_CURL_OPENSSL' [ 104s] + /usr/bin/python setup.py build [ 104s] Using curl-config (libcurl 7.21.3) [ 104s] running build [ 104s] running build_py [ 104s] creating build [ 104s] creating build/lib.linux-armv7l-2.7 [ 104s] creating build/lib.linux-armv7l-2.7/curl [ 104s] copying python/curl/__init__.py -> build/lib.linux-armv7l-2.7/curl [ 104s] running build_ext [ 104s] building 'pycurl' extension [ 104s] creating build/temp.linux-armv7l-2.7 [ 104s] creating build/temp.linux-armv7l-2.7/src [ 104s] gcc -pthread -DNDEBUG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DHAVE_CURL_OPENSSL -fPIC -DHAVE_CURL_OPENSSL=1 -DHAVE_CURL_OPENSSL=1 -DHAVE_CURL_SSL=1 -I/usr/include/python2.7 -c src/pycurl.c -o build/temp.linux-armv7l-2.7/src/pycurl.o [ 104s] src/pycurl.c: In function 'do_multi_info_read': [ 104s] src/pycurl.c:2843:15: warning: call to '_curl_easy_getinfo_err_string' declared with attribute warning: curl_easy_getinfo expects a pointer to char * for this info [ 104s] In function 'util_curl_unsetopt', [ 104s] inlined from 'do_curl_unsetopt' at src/pycurl.c:1551:5: [ 104s] src/pycurl.c:1476:9: warning: call to '_curl_easy_setopt_err_CURLSH' declared with attribute warning: curl_easy_setopt expects a CURLSH* argument for this option [ 105s] src/pycurl.c: In function 'multi_socket_callback': [ 105s] src/pycurl.c:2355:11: warning: call to '_curl_easy_getinfo_err_string' declared with attribute warning: curl_easy_getinfo expects a pointer to char * for this info [ 105s] gcc -pthread -shared -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DHAVE_CURL_OPENSSL build/temp.linux-armv7l-2.7/src/pycurl.o -L/usr/lib -lcurl -lcares -lidn -lssl -lcrypto -lrt -lssl -lcrypto -lz -lcrypto -lpython2.7 -o build/lib.linux-armv7l-2.7/pycurl.so [ 105s] + exit 0 [ 105s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.mJVS5l [ 105s] + umask 022 [ 105s] + cd /home/abuild/rpmbuild/BUILD [ 105s] + cd python-pycurl-7.19.0 [ 105s] + LANG=C [ 105s] + export LANG [ 105s] + unset DISPLAY [ 105s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm [ 105s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm [ 105s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm [ 105s] + /usr/bin/python setup.py install -O1 --skip-build --root /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm --prefix /usr [ 105s] Using curl-config (libcurl 7.21.3) [ 105s] running install [ 106s] running install_lib [ 106s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm [ 106s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr [ 106s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/lib [ 106s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/lib/python2.7 [ 106s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/lib/python2.7/site-packages [ 106s] copying build/lib.linux-armv7l-2.7/pycurl.so -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/lib/python2.7/site-packages [ 106s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/lib/python2.7/site-packages/curl [ 106s] copying build/lib.linux-armv7l-2.7/curl/__init__.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/lib/python2.7/site-packages/curl [ 106s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/lib/python2.7/site-packages/curl/__init__.py to __init__.pyc [ 106s] writing byte-compilation script '/tmp/tmp3e1F4o.py' [ 106s] /usr/bin/python -O /tmp/tmp3e1F4o.py [ 106s] removing /tmp/tmp3e1F4o.py [ 106s] running install_data [ 106s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share [ 106s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc [ 106s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl [ 106s] copying ChangeLog -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl [ 106s] copying COPYING -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl [ 106s] copying COPYING2 -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl [ 106s] copying INSTALL -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl [ 106s] copying README -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl [ 106s] copying TODO -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl [ 106s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/html [ 106s] copying doc/callbacks.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/html [ 106s] copying doc/pycurl.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/html [ 106s] copying doc/curlobject.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/html [ 106s] copying doc/curlmultiobject.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/html [ 106s] copying doc/curlshareobject.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/html [ 106s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/examples [ 106s] copying examples/basicfirst.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/examples [ 106s] copying examples/retriever-multi.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/examples [ 106s] copying examples/xmlrpc_curl.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/examples [ 106s] copying examples/linksys.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/examples [ 106s] copying examples/sfquery.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/examples [ 106s] copying examples/file_upload.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/examples [ 106s] copying examples/retriever.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/examples [ 106s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/tests [ 106s] copying tests/test_socketopen.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/tests [ 106s] copying tests/test_multi3.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/tests [ 106s] copying tests/test_multi_socket.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/tests [ 106s] copying tests/test_multi_vs_thread.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/tests [ 106s] copying tests/util.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/tests [ 106s] copying tests/test_post2.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/tests [ 106s] copying tests/test_share.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/tests [ 106s] copying tests/test_ftp.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/tests [ 106s] copying tests/test_multi4.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/tests [ 106s] copying tests/test_multi.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/tests [ 106s] copying tests/test_xmlrpc.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/tests [ 106s] copying tests/test_multi2.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/tests [ 106s] copying tests/test_stringio.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/tests [ 106s] copying tests/test_multi5.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/tests [ 106s] copying tests/test_multi_timer.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/tests [ 106s] copying tests/test_internals.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/tests [ 106s] copying tests/test_post3.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/tests [ 106s] copying tests/test.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/tests [ 106s] copying tests/test_multi_socket_select.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/tests [ 106s] copying tests/test_memleak.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/tests [ 106s] copying tests/test_gtk.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/tests [ 106s] copying tests/test_post.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/tests [ 106s] copying tests/test_multi6.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/tests [ 106s] copying tests/test_debug.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/tests [ 106s] copying tests/test_getinfo.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/tests [ 106s] copying tests/test_cb.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/share/doc/pycurl/tests [ 106s] running install_egg_info [ 106s] Writing /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/lib/python2.7/site-packages/pycurl-7.19.0-py2.7.egg-info [ 106s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/python-pycurl-7.19.0 [ 106s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/lib/python2.7/site-packages/pycurl.so [ 106s] 246 blocks [ 106s] + /usr/lib/rpm/check-buildroot [ 106s] + /usr/lib/rpm//brp-compress [ 106s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 106s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 107s] + /usr/lib/rpm/brp-python-bytecompile [ 107s] Bytecompiling .py files below /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm/usr/lib/python2.7/ using /usr/bin/python2.7 [ 109s] + /usr/lib/rpm/brp-python-hardlink [ 109s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm [ 109s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.CVF8IK [ 109s] + umask 022 [ 109s] + cd /home/abuild/rpmbuild/BUILD [ 109s] + cd python-pycurl-7.19.0 [ 109s] + unset DISPLAY [ 109s] + export 'PYTHONPATH=/home/abuild/rpmbuild/BUILD/python-pycurl-7.19.0/build/lib*' [ 109s] + PYTHONPATH='/home/abuild/rpmbuild/BUILD/python-pycurl-7.19.0/build/lib*' [ 109s] + /usr/bin/python tests/test_internals.py -q [ 110s] gc: collectable [ 110s] gc: collectable [ 110s] gc: collectable [ 110s] gc: collectable [ 110s] Python 2.7.1 (r271:86832, Apr 23 2013, 10:11:51) [GCC] [ 110s] PycURL libcurl/7.21.3 OpenSSL/1.0.1c zlib/1.2.5 c-ares/1.7.4 libidn/1.15 (compiled against 0x71503) [ 110s] PycURL version info (3, '7.21.3', 464131, 'armv7l-unknown-linux-gnueabi', 9948, 'OpenSSL/1.0.1c', 0, '1.2.5', ('dict', 'file', 'ftp', 'ftps', 'gopher', 'http', 'https', 'imap', 'imaps', 'pop3', 'pop3s', 'rtsp', 'smtp', 'smtps', 'telnet', 'tftp'), '1.7.4', 67332, '1.15') [ 110s] build/lib.linux-armv7l-2.7/pycurl.so, compiled Oct 10 2013 21:46:08 [ 110s] All tests passed. [ 110s] + exit 0 [ 110s] Processing files: python-pycurl-7.19.0-6.1.armv7l [ 110s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 110s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 110s] [ 110s] Provides: pycurl = 7.19.0-6.1 pycurl.so [ 110s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 110s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libcares.so.2 libcrypto.so.1.0.0 libcurl.so.4 libcurl.so.4(CURL_OPENSSL_3) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libidn.so.11 libpthread.so.0 libpthread.so.0(GLIBC_2.4) libpython2.7.so.1.0 librt.so.1 libssl.so.1.0.0 libz.so.1 python(abi) = 2.7 [ 110s] Processing files: python-pycurl-debuginfo-7.19.0-6.1.armv7l [ 110s] Processing files: python-pycurl-debugsource-7.19.0-6.1.armv7l [ 110s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm [ 110s] Wrote: /home/abuild/rpmbuild/SRPMS/python-pycurl-7.19.0-6.1.src.rpm [ 110s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-7.19.0-6.1.armv7l.rpm [ 110s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-debuginfo-7.19.0-6.1.armv7l.rpm [ 110s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-debugsource-7.19.0-6.1.armv7l.rpm [ 110s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.bEK2xZ [ 110s] + umask 022 [ 110s] + cd /home/abuild/rpmbuild/BUILD [ 110s] + cd python-pycurl-7.19.0 [ 110s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm [ 110s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-6.1.arm [ 110s] + exit 0 [ 110s] ... checking for files with abuild user/group [ 110s] ... creating baselibs [ 111s] ... comparing built packages with the former built [ 111s] /usr/lib/build/rpm-check.sh [ 111s] compare /.build.oldpackages/python-pycurl-7.19.0-5.3.src.rpm /home/abuild/rpmbuild/SRPMS/python-pycurl-7.19.0-6.1.src.rpm [ 111s] compare /.build.oldpackages/python-pycurl-7.19.0-5.3.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-7.19.0-6.1.armv7l.rpm [ 111s] --- /tmp/tmp.BbzyyC7yc9 2013-10-10 21:46:16.115009273 +0000 [ 111s] +++ /tmp/tmp.oVFI8aQvag 2013-10-10 21:46:16.123009273 +0000 [ 111s] @@ -4,7 +4,7 @@ [ 111s] objects identified by a URL from a Python program, similar to the [ 111s] urllib Python module. PycURL is mature, very fast, and supports a lot [ 111s] of features. [ 111s] - tizen Tizen:2.0:Panda obs://w11.vlan200.tizen.org/Tizen:2.0:Panda/standard/e2d06f8fefc0105c28943f01c9189526-python-pycurl LGPLv2+ LGPLv2+ [ 111s] + tizen Tizen:2.0:Panda obs://w05.vlan200.tizen.org/Tizen:2.0:Panda/standard/e467ea3c0a9352929f8c912112f88a56-python-pycurl LGPLv2+ LGPLv2+ [ 111s] Development/Languages http://pycurl.sourceforge.net/ (none) (none) (none) [ 111s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 111s] cpio gzip 9 [ 111s] RPM meta information is different [ 111s] compare /.build.oldpackages/python-pycurl-debuginfo-7.19.0-5.3.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-debuginfo-7.19.0-6.1.armv7l.rpm [ 111s] --- /tmp/tmp.0tnXmqzVz4 2013-10-10 21:46:16.167009274 +0000 [ 111s] +++ /tmp/tmp.FjFRowuE7d 2013-10-10 21:46:16.179009271 +0000 [ 111s] @@ -3,7 +3,7 @@ [ 111s] This package provides debug information for package python-pycurl. [ 111s] Debug information is useful when developing applications that use this [ 111s] package or when debugging this package. [ 111s] - tizen Tizen:2.0:Panda obs://w11.vlan200.tizen.org/Tizen:2.0:Panda/standard/e2d06f8fefc0105c28943f01c9189526-python-pycurl LGPLv2+ LGPLv2+ [ 111s] + tizen Tizen:2.0:Panda obs://w05.vlan200.tizen.org/Tizen:2.0:Panda/standard/e467ea3c0a9352929f8c912112f88a56-python-pycurl LGPLv2+ LGPLv2+ [ 111s] Development/Debug http://pycurl.sourceforge.net/ (none) (none) (none) [ 111s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 111s] cpio gzip 9 [ 111s] RPM meta information is different [ 111s] compare /.build.oldpackages/python-pycurl-debugsource-7.19.0-5.3.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-debugsource-7.19.0-6.1.armv7l.rpm [ 111s] --- /tmp/tmp.u8LppoDOQn 2013-10-10 21:46:16.231009274 +0000 [ 111s] +++ /tmp/tmp.Y90ot6LQzV 2013-10-10 21:46:16.243009274 +0000 [ 111s] @@ -3,7 +3,7 @@ [ 111s] This package provides debug sources for package python-pycurl. [ 111s] Debug sources are useful when developing applications that use this [ 111s] package or when debugging this package. [ 111s] - tizen Tizen:2.0:Panda obs://w11.vlan200.tizen.org/Tizen:2.0:Panda/standard/e2d06f8fefc0105c28943f01c9189526-python-pycurl LGPLv2+ LGPLv2+ [ 111s] + tizen Tizen:2.0:Panda obs://w05.vlan200.tizen.org/Tizen:2.0:Panda/standard/e467ea3c0a9352929f8c912112f88a56-python-pycurl LGPLv2+ LGPLv2+ [ 111s] Development/Debug http://pycurl.sourceforge.net/ (none) (none) (none) [ 111s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 111s] cpio gzip 9 [ 111s] RPM meta information is different [ 111s] ... saving built statistics [ 111s] /.build/build: line 3144: mount: command not found [ 111s] ERROR: no root disk device found, yet another new device name? [ 111s] ls: cannot access /sys/block/: No such file or directory [ 111s] umount: /sys: not mounted [ 111s] ... saving built packages [ 111s] /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-7.19.0-6.1.armv7l.rpm [ 111s] /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-debuginfo-7.19.0-6.1.armv7l.rpm [ 111s] /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-debugsource-7.19.0-6.1.armv7l.rpm [ 111s] /home/abuild/rpmbuild/SRPMS/python-pycurl-7.19.0-6.1.src.rpm [ 111s] /home/abuild/rpmbuild/OTHER/_statistics [ 111s] [ 111s] w05 finished "build python-pycurl.spec" at Thu Oct 10 21:46:16 UTC 2013. [ 111s] [ 112s] /.build/build: line 391: mount: command not found [ 115s] Warning: VM doesn't support sysrq and /sbin/halt not installed [ 115s] Warning: clean shut down of the VM didn't work [ 115s] [ 75.043016] Kernel panic - not syncing: Attempted to kill init! [ 115s] [ 75.043511] Pid: 1, comm: qemu-arm Not tainted 3.1.9-1.4-default #1 [ 115s] [ 75.043925] Call Trace: [ 115s] [ 75.044119] [] dump_trace+0x9a/0x270 [ 115s] [ 75.044457] [] dump_stack+0x69/0x6f [ 115s] [ 75.044886] [] panic+0x95/0x1a9 [ 115s] [ 75.045202] [] forget_original_parent+0x244/0x250 [ 115s] [ 75.045638] [] exit_notify+0x10/0x160 [ 115s] [ 75.046003] [] do_exit+0x1dd/0x410 [ 115s] [ 75.046348] [] do_group_exit+0x41/0xb0 [ 115s] [ 75.046715] [] sys_exit_group+0x12/0x20 [ 115s] [ 75.047092] [] system_call_fastpath+0x16/0x1b [ 115s] [ 75.047496] [<00000000601208d9>] 0x601208d8 [ 118s] [ 75.047901] Rebooting in 1 seconds..build: extracting built packages... [ 118s] python-pycurl-7.19.0-6.1.armv7l.rpm [ 118s] python-pycurl-debuginfo-7.19.0-6.1.armv7l.rpm [ 118s] python-pycurl-debugsource-7.19.0-6.1.armv7l.rpm [ 118s] python-pycurl-7.19.0-6.1.src.rpm [ 118s] _statistics