[ 0s] Using BUILD_ROOT=/srv/build/root_4/.mount [ 0s] Using BUILD_ARCH=armv7el [ 0s] Doing kvm build in /srv/build/root_4/root [ 0s] [ 0s] [ 0s] w16 started "build xorg-x11-xinit.spec" at Thu Oct 10 22:09:25 UTC 2013. [ 0s] [ 0s] Building xorg-x11-xinit for project 'Tizen:2.0:Panda' repository 'standard' arch 'armv7el' srcmd5 '2b3dab5180c0b5c34f5b5ee997c735e7' [ 0s] [ 0s] processing specfile /srv/build/root_4/.build-srcdir/xorg-x11-xinit.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_4/.build-srcdir/xorg-x11-xinit.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/4/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_4/.build.rpmlist /srv/build/root_4/.build-srcdir/xorg-x11-xinit.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 41: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 44: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 45: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 48: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 51: echo: write error: Invalid argument [ 0s] Please check cpu value and header information for m68k! [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 55: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 59: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 60: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 61: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 62: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 63: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 64: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 67: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 68: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 71: echo: write error: Invalid argument [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc-common -> eglibc [ 0s] cycle: libgcc -> eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: libgcc -> eglibc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm -> rpm-libs [ 0s] [1/56] preinstalling libgcc... [ 0s] [2/56] preinstalling setup... [ 0s] [3/56] preinstalling filesystem... [ 0s] [4/56] preinstalling eglibc... [ 0s] [5/56] preinstalling eglibc-common... [ 1s] [6/56] preinstalling bash... [ 1s] [7/56] preinstalling bzip2-libs... [ 1s] [8/56] preinstalling diffutils... [ 1s] [9/56] preinstalling elfutils-libelf... [ 1s] [10/56] preinstalling libattr... [ 1s] [11/56] preinstalling liblua... [ 1s] [12/56] preinstalling libstdc++... [ 1s] [13/56] preinstalling ncurses-libs... [ 1s] [14/56] preinstalling nspr... [ 1s] [15/56] preinstalling nss-softokn-freebl... [ 1s] [16/56] preinstalling popt... [ 1s] [17/56] preinstalling readline... [ 1s] [18/56] preinstalling sed... [ 1s] [19/56] preinstalling sqlite... [ 1s] [20/56] preinstalling xz-libs... [ 1s] [21/56] preinstalling zlib... [ 1s] [22/56] preinstalling qemu.x86_64... [ 1s] [23/56] preinstalling libcap... [ 1s] [24/56] preinstalling libacl... [ 1s] [25/56] preinstalling libfile... [ 1s] [26/56] preinstalling bzip2... [ 1s] [27/56] preinstalling nss... [ 1s] [28/56] preinstalling tar... [ 1s] [29/56] preinstalling coreutils... [ 2s] [30/56] preinstalling file... [ 2s] [31/56] preinstalling rpm... [ 2s] [32/56] preinstalling tizen-accelerator... [ 2s] [33/56] preinstalling rpm-libs... [ 2s] [34/56] preinstalling gmp-x86-arm... [ 2s] [35/56] preinstalling mpc-x86-arm... [ 2s] [36/56] preinstalling mpfr-x86-arm... [ 2s] [37/56] preinstalling bzip2-libs-x86-arm... [ 2s] [38/56] preinstalling eglibc-x86-arm... [ 2s] [39/56] preinstalling elfutils-libelf-x86-arm... [ 2s] [40/56] preinstalling libacl-x86-arm... [ 2s] [41/56] preinstalling libattr-x86-arm... [ 2s] [42/56] preinstalling libcap-x86-arm... [ 2s] [43/56] preinstalling libfile-x86-arm... [ 2s] [44/56] preinstalling libgcc-x86-arm... [ 2s] [45/56] preinstalling liblua-x86-arm... [ 2s] [46/56] preinstalling ncurses-libs-x86-arm... [ 2s] [47/56] preinstalling nspr-x86-arm... [ 2s] [48/56] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [49/56] preinstalling nss-x86-arm... [ 2s] [50/56] preinstalling popt-x86-arm... [ 2s] [51/56] preinstalling rpm-libs-x86-arm... [ 2s] [52/56] preinstalling sqlite-x86-arm... [ 2s] [53/56] preinstalling xz-libs-x86-arm... [ 2s] [54/56] preinstalling zlib-x86-arm... [ 2s] [55/56] preinstalling bash-x86-arm... [ 2s] [56/56] preinstalling rpm-x86-arm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 3s] copying packages... [ 3s] reordering...cycle: bash -> eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> bash [ 3s] cycle: eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> libgcc [ 3s] breaking dependency eglibc -> eglibc-common [ 3s] cycle: eglibc -> libgcc [ 3s] breaking dependency libgcc -> eglibc [ 3s] cycle: filesystem -> setup [ 3s] breaking dependency setup -> filesystem [ 3s] cycle: ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses [ 3s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses-base [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl -> perl-libs [ 3s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 3s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl -> perl-IO-Compress-Zlib [ 3s] breaking dependency perl -> perl-IO-Compress-Zlib [ 3s] cycle: perl -> perl-IO-Compress-Base [ 3s] breaking dependency perl -> perl-IO-Compress-Base [ 3s] cycle: perl -> perl-Module-Pluggable [ 3s] breaking dependency perl -> perl-Module-Pluggable [ 3s] cycle: perl -> perl-Pod-Simple [ 3s] breaking dependency perl -> perl-Pod-Simple [ 3s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 3s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 3s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 3s] cycle: dbus -> dbus-libs [ 3s] breaking dependency dbus -> dbus-libs [ 3s] cycle: nss -> nss-sysinit [ 3s] breaking dependency nss -> nss-sysinit [ 3s] cycle: perl-CPAN -> perl-Test-Harness [ 3s] breaking dependency perl-Test-Harness -> perl-CPAN [ 3s] cycle: rpm-libs -> rpm [ 3s] breaking dependency rpm -> rpm-libs [ 3s] done [ 4s] booting kvm ... [ 4s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/kernel/vmlinuz -initrd /srv/kernel/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8192 -drive file=/srv/build/root_4/root,if=virtio,cache=unsafe -drive file=/srv/build/root_4/root,if=ide,index=0,cache=unsafe -drive file=/srv/build/root_4/swap,if=virtio,cache=unsafe -smp 4 [ 5s]  [ 5s] Google, Inc. [ 5s] Serial Graphics Adapter 09/05/12 [ 5s] SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ (abuild@build24) Wed Sep 5 14:01:11 UTC 2012 [ 5s] Term: 80x24 [ 5s] 4 0 [ 5s]  SeaBIOS (version 1.6.3-20120905_140109) [ 5s] [ 5s] Booting from ROM... [ 8s] doing fast boot [ 8s] Creating device nodes with udev [ 8s] udevd[207]: failed to execute '/etc/sysconfig/network/scripts/ifup-sysctl' '/etc/sysconfig/network/scripts/ifup-sysctl lo -o hotplug': No such file or directory [ 8s] [ 8s] Waiting for device /dev/vda to appear: ok [ 8s] fsck from util-linux 2.20.1 [ 8s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 8s] /dev/vda: clean, 9422/2097152 files, 262246/8388608 blocks [ 8s] fsck succeeded. Mounting root device read-write. [ 8s] Mounting root /dev/vda [ 8s] mount -o rw,noatime,acl,user_xattr -t ext4 /dev/vda /root [ 9s] replacing /etc/mtab with symlink to /proc/self/mounts [ 9s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 9s] 2nd stage started in virtual machine [ 9s] machine type: armv7l [ 9s] switching personality to 8... [ 9s] 2nd stage started in virtual machine [ 10s] machine type: armv7l [ 10s] /.build/build: line 770: mount: command not found [ 10s] swapon on /dev/vdb [ 10s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 10s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 10s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 10s] logging output to //.build.log... [ 10s] processing specfile /.build-srcdir/xorg-x11-xinit.spec ... [ 10s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/xorg-x11-xinit.spec build rpmlint-Factory ... [ 10s] running rpm-x86-arm postinstall script [ 11s] running rpm-libs-x86-arm postinstall script [ 11s] running tizen-accelerator postinstall script [ 11s] running bash-x86-arm postinstall script [ 11s] initializing rpm db... [ 15s] [1/159] installing kernel-headers-2.6.36-5.1 [ 15s] [2/159] installing libX11-common-1.5.0-4.5 [ 15s] [3/159] installing tizen-release-2.0.0-2.4 [ 16s] [4/159] installing tzdata-2011h-4.2 [ 16s] [5/159] installing libgcc-4.5.3-5.1 [ 16s] [6/159] installing setup-0.1-5.1 [ 16s] [7/159] installing filesystem-0.1-5.1 [ 16s] warning: group lock does not exist - using root [ 16s] warning: group mail does not exist - using root [ 16s] [8/159] installing eglibc-2.13-5.1 [ 17s] [9/159] installing eglibc-common-2.13-5.1 [ 26s] [10/159] installing bash-4.1-6.3 [ 26s] [11/159] installing bzip2-libs-1.0.5-8.1 [ 26s] [12/159] installing cpio-2.8-7.1 [ 26s] [13/159] installing diffutils-3.0-6.2 [ 26s] [14/159] installing e2fsprogs-libs-1.41.11-3.3 [ 26s] [15/159] installing elfutils-libelf-0.152-5.1 [ 27s] [16/159] installing expat-2.0.1-12.1 [ 27s] [17/159] installing fdupes-1.40-46.1 [ 27s] [18/159] installing findutils-4.2.31-5.1 [ 27s] [19/159] installing gdbm-1.8.3-5.1 [ 27s] [20/159] installing libXau-1.0.7-3.4 [ 27s] [21/159] installing libattr-2.4.44-12.4 [ 27s] [22/159] installing libgomp-4.5.3-5.1 [ 27s] [23/159] installing libidn-1.15-9.4 [ 27s] [24/159] installing liblua-5.1.4-9.3 [ 27s] [25/159] installing libstdc++-4.5.3-5.1 [ 27s] [26/159] installing libuuid-2.20.2-4.3 [ 27s] [27/159] installing lzo-2.03-5.1 [ 28s] [28/159] installing m4-1.4.14-5.1 [ 28s] [29/159] installing make-3.81-5.1 [ 28s] [30/159] installing net-tools-1.60-90.3 [ 28s] [31/159] installing nspr-4.8.7-4.4 [ 28s] [32/159] installing nss-softokn-freebl-3.12.9-6.4 [ 28s] [33/159] installing patch-2.6.1.169-5.1 [ 28s] [34/159] installing pkgconfig-0.25-6.1 [ 28s] [35/159] installing popt-1.16-6.3 [ 28s] [36/159] installing readline-5.2-17.4 [ 28s] [37/159] installing sed-4.1.5-5.2 [ 28s] [38/159] installing smack-1.0slp2+s7-2.3 [ 28s] [39/159] installing sqlite-3.7.9-4.4 [ 29s] [40/159] installing xz-libs-5.0.3-4.3 [ 29s] [41/159] installing zlib-1.2.5-6.3 [ 29s] [42/159] installing ncurses-libs-5.7-7.4 [ 29s] [43/159] installing build-compare-2009.10.14-30.1 [ 29s] [44/159] installing libpthread-stubs-0.3-4.4 [ 29s] [45/159] installing libstdc++-devel-4.5.3-5.1 [ 29s] [46/159] installing qemu.x86_64-1.2-2.3 [ 30s] [47/159] installing xorg-x11-proto-core-7.0.23-4.4 [ 30s] [48/159] installing xorg-x11-proto-kb-1.0.6-4.4 [ 30s] [49/159] installing xorg-x11-xutils-dev-7.7-3.4 [ 30s] [50/159] installing eglibc-headers-2.13-5.1 [ 31s] [51/159] installing libcap-2.21-4.3 [ 31s] [52/159] installing unzip-6.0-12.4 [ 31s] [53/159] installing zlib-devel-1.2.5-6.3 [ 31s] [54/159] installing c-ares-1.7.4-6.1 [ 31s] [55/159] installing gmp-5.0.1-5.1 [ 31s] [56/159] installing libacl-2.2.49-4.3 [ 31s] [57/159] installing libfile-5.04-5.1 [ 31s] [58/159] installing libpcre-7.9-3.1 [ 31s] [59/159] installing libxcb-1.8.1-3.5 [ 31s] [60/159] installing lzo-minilzo-2.03-5.1 [ 32s] [61/159] installing ncurses-5.7-7.4 [ 32s] [62/159] installing openssl-1.0.1c-4.4 [ 32s] [63/159] installing binutils-2.21.51.20110421-6.1 [ 32s] [64/159] installing bzip2-1.0.5-8.1 [ 32s] [65/159] installing libblkid-2.20.2-4.3 [ 32s] [66/159] installing xz-5.0.3-4.3 [ 32s] [67/159] installing elfutils-libs-0.152-5.1 [ 32s] [68/159] installing nss-3.12.9-6.4 [ 32s] [69/159] installing perl-5.12.1-62.1 [ 33s] [70/159] installing ncurses-base-5.7-7.4 [ 33s] [71/159] installing perl-HTML-Tagset-3.20-10.3 [ 63s] [72/159] installing perl-IO-Compress-Base-2.008-62.1 [ 63s] [73/159] installing perl-Module-Pluggable-3.60-62.1 [ 63s] [74/159] installing perl-Pod-Escapes-1.04-62.1 [ 63s] [75/159] installing perl-TimeDate-1.20-3.3 [ 63s] [76/159] installing eglibc-devel-2.13-5.1 [ 63s] [77/159] installing grep-2.5.1a-65.2 [ 63s] [78/159] installing libXau-devel-1.0.7-3.4 [ 63s] [79/159] installing lzo-devel-2.03-5.1 [ 64s] [80/159] installing mpfr-3.0.0-4.4 [ 64s] [81/159] installing perl-Compress-Raw-Zlib-2.008-62.1 [ 64s] [82/159] installing perl-devel-5.12.1-62.1 [ 64s] [83/159] installing perl-libs-5.12.1-62.1 [ 64s] [84/159] installing tar-1.17-7.1 [ 64s] [85/159] installing coreutils-6.9-13.1 [ 64s] [86/159] installing file-5.04-5.1 [ 64s] [87/159] installing libX11-1.5.0-4.5 [ 64s] [88/159] installing libmount-2.20.2-4.3 [ 64s] [89/159] installing xz-lzma-compat-5.0.3-4.3 [ 64s] [90/159] installing elfutils-0.152-5.1 [ 64s] [91/159] installing nss-sysinit-3.12.9-6.4 [ 65s] [92/159] installing libcurl-7.21.3-8.4 [ 65s] [93/159] installing perl-ExtUtils-ParseXS-2.18-62.1 [ 65s] [94/159] installing perl-Pod-Simple-3.07-62.1 [ 65s] [95/159] installing perl-Test-Simple-0.80-62.1 [ 65s] [96/159] installing tizen-accelerator-1.0.1-5.1 [ 65s] [97/159] installing perl-IO-Compress-Zlib-2.008-62.1 [ 65s] [98/159] installing perl-Test-Harness-3.12-62.1 [ 65s] [99/159] installing gawk-3.1.5-4.4 [ 65s] [100/159] installing gzip-1.3.14-6.1 [ 66s] [101/159] installing libxcb-devel-1.8.1-3.5 [ 66s] [102/159] installing mpc-0.9-5.4 [ 66s] [103/159] installing build-2011.01.10a-5.1 [ 66s] [104/159] installing curl-7.21.3-8.4 [ 66s] [105/159] installing dbus-1.6.4-7.1 [ 66s] warning: group dbus does not exist - using root [ 66s] [106/159] installing util-linux-2.20.2-4.3 [ 66s] warning: group tty does not exist - using root [ 66s] /bin/chown: `root:root': invalid user [ 66s] [107/159] installing bzip2-libs-x86-arm-1.0.5-8.4 [ 66s] [108/159] installing dbus-libs-1.6.4-7.1 [ 66s] [109/159] installing eglibc-x86-arm-2.13-8.5 [ 67s] [110/159] installing elfutils-libelf-x86-arm-0.152-8.4 [ 67s] [111/159] installing elfutils-libs-x86-arm-0.152-8.7 [ 67s] [112/159] installing gmp-x86-arm-5.0.1-8.4 [ 67s] [113/159] installing libacl-x86-arm-2.2.49-8.4 [ 67s] [114/159] installing libattr-x86-arm-2.4.44-8.4 [ 68s] [115/159] installing libcap-x86-arm-2.21-8.4 [ 68s] [116/159] installing libfile-x86-arm-5.04-8.4 [ 68s] [117/159] installing libgcc-x86-arm-4.5.3-8.4 [ 68s] [118/159] installing liblua-x86-arm-5.1.4-8.4 [ 68s] [119/159] installing mpc-x86-arm-0.9-8.4 [ 68s] [120/159] installing mpfr-x86-arm-3.0.0-8.4 [ 69s] [121/159] installing ncurses-libs-x86-arm-5.7-8.4 [ 69s] [122/159] installing nspr-x86-arm-4.8.7-8.7 [ 69s] [123/159] installing nss-softokn-freebl-x86-arm-3.12.9-8.7 [ 69s] [124/159] installing nss-x86-arm-3.12.9-8.7 [ 69s] [125/159] installing perl-ExtUtils-MakeMaker-6.36-62.1 [ 69s] [126/159] installing popt-x86-arm-1.16-8.4 [ 69s] [127/159] installing sqlite-x86-arm-3.7.13-8.4 [ 70s] [128/159] installing xz-libs-x86-arm-5.0.3-8.4 [ 70s] [129/159] installing zlib-x86-arm-1.2.5-8.4 [ 70s] [130/159] installing libX11-devel-1.5.0-4.5 [ 70s] [131/159] installing cpp-4.5.3-5.1 [ 70s] [132/159] installing rpm-4.9.1-7.4 [ 71s] [133/159] installing dbus-devel-1.6.4-7.1 [ 71s] [134/159] installing perl-CPAN-1.9205-62.1 [ 71s] [135/159] installing bash-x86-arm-4.1-8.2 [ 71s] [136/159] installing fdupes-x86-arm-1.40-8.4 [ 71s] [137/159] installing findutils-x86-arm-4.2.31-8.4 [ 71s] [138/159] installing gawk-x86-arm-3.1.5-8.4 [ 71s] [139/159] installing gzip-x86-arm-1.3.14-8.4 [ 72s] [140/159] installing make-x86-arm-3.81-8.4 [ 72s] [141/159] installing patch-x86-arm-2.6.1.169-8.2 [ 72s] [142/159] installing sed-x86-arm-4.1.5-8.4 [ 72s] [143/159] installing diffutils-x86-arm-3.0-8.4 [ 72s] [144/159] installing autoconf-2.68-5.1 [ 72s] [145/159] installing coreutils-x86-arm-6.9-8.4 [ 74s] [146/159] installing file-x86-arm-5.04-8.4 [ 74s] [147/159] installing tar-x86-arm-1.17-8.4 [ 75s] [148/159] installing elfutils-x86-arm-0.152-8.7 [ 75s] [149/159] installing gcc-4.5.3-5.1 [ 75s] [150/159] installing rpm-libs-4.9.1-7.4 [ 75s] [151/159] installing rpm-libs-x86-arm-4.9.1-8.4 [ 75s] [152/159] installing automake-1.11.1-7.1 [ 75s] [153/159] installing gcc-c++-4.5.3-5.1 [ 76s] [154/159] installing rpm-build-4.9.1-7.4 [ 76s] [155/159] installing libtool-2.2.6b-4.4 [ 76s] [156/159] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.2 [ 77s] "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " [ 77s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 77s] cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory [ 77s] cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [ 77s] [157/159] installing rpm-x86-arm-4.9.1-8.4 [ 77s] /bin/rpm.orig-arm already present - skipping. [ 77s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 77s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 77s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 77s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 77s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 77s] [158/159] installing rpm-build-x86-arm-4.9.1-8.4 [ 77s] [159/159] installing cross-armv7l-binutils-accel-armv7l-2.22-1.3 [ 77s] mv: cannot stat `/usr/bin/gprov': No such file or directory [ 78s] now finalizing build dir... [ 78s] /.build/build: line 2585: mount: command not found [ 78s] /.build/build: line 2586: mount: command not found [ 78s] /.build/build: line 2680: //etc/passwd: No such file or directory [ 81s] build target is armv7l-tizen-linux [ 81s] ----------------------------------------------------------------- [ 81s] I have the following modifications for xorg-x11-xinit.spec: [ 81s] 6c6 [ 81s] < Release: 5 [ 81s] --- [ 81s] > Release: 7.3 [ 81s] ----------------------------------------------------------------- [ 81s] ----- building xorg-x11-xinit.spec (user abuild) [ 81s] ----------------------------------------------------------------- [ 81s] ----------------------------------------------------------------- [ 81s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://w16.vlan200.tizen.org/Tizen:2.0:Panda/standard/2b3dab5180c0b5c34f5b5ee997c735e7-xorg-x11-xinit' /home/abuild/rpmbuild/SOURCES/xorg-x11-xinit.spec [ 81s] Building target platforms: armv7l-tizen-linux [ 81s] Building for target armv7l-tizen-linux [ 81s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.sk84hH [ 81s] + umask 022 [ 81s] + cd /home/abuild/rpmbuild/BUILD [ 81s] + LANG=C [ 81s] + export LANG [ 81s] + unset DISPLAY [ 81s] + cd /home/abuild/rpmbuild/BUILD [ 81s] + rm -rf xorg-x11-xinit-1.3.2 [ 81s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/xorg-x11-xinit-1.3.2.tar.gz [ 81s] + /bin/tar -xf - [ 81s] + STATUS=0 [ 81s] + '[' 0 -ne 0 ']' [ 81s] + cd xorg-x11-xinit-1.3.2 [ 81s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 81s] + exit 0 [ 81s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.aJsaDn [ 81s] + umask 022 [ 81s] + cd /home/abuild/rpmbuild/BUILD [ 81s] + cd xorg-x11-xinit-1.3.2 [ 81s] + LANG=C [ 81s] + export LANG [ 81s] + unset DISPLAY [ 81s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 81s] + export CFLAGS [ 81s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 81s] + export CXXFLAGS [ 81s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 81s] + export FFLAGS [ 81s] + LD_AS_NEEDED=1 [ 81s] + export LD_AS_NEEDED [ 81s] + autoreconf [ 117s] + ./configure --prefix=/usr 'CFLAGS=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -g -D_F_EXIT_AFTER_XORG_AND_XCLIENT_LAUNCHED_ ' [ 117s] checking for a BSD-compatible install... /usr/bin/install -c [ 118s] checking whether build environment is sane... yes [ 118s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 118s] checking for gawk... gawk [ 118s] checking whether make sets $(MAKE)... yes [ 118s] checking whether to enable maintainer-specific portions of Makefiles... no [ 118s] checking for style of include used by make... GNU [ 118s] checking for gcc... gcc [ 118s] checking whether the C compiler works... yes [ 118s] checking for C compiler default output file name... a.out [ 118s] checking for suffix of executables... [ 118s] checking whether we are cross compiling... no [ 118s] checking for suffix of object files... o [ 118s] checking whether we are using the GNU C compiler... yes [ 118s] checking whether gcc accepts -g... yes [ 118s] checking for gcc option to accept ISO C89... none needed [ 118s] checking dependency style of gcc... gcc3 [ 118s] checking for gcc option to accept ISO C99... -std=gnu99 [ 119s] checking how to run the C preprocessor... gcc -std=gnu99 -E [ 119s] checking for grep that handles long lines and -e... /bin/grep [ 119s] checking for egrep... /bin/grep -E [ 119s] checking for ANSI C header files... yes [ 119s] checking for sys/types.h... yes [ 119s] checking for sys/stat.h... yes [ 119s] checking for stdlib.h... yes [ 119s] checking for string.h... yes [ 119s] checking for memory.h... yes [ 119s] checking for strings.h... yes [ 119s] checking for inttypes.h... yes [ 119s] checking for stdint.h... yes [ 119s] checking for unistd.h... yes [ 119s] checking whether __clang__ is declared... no [ 119s] checking whether __INTEL_COMPILER is declared... no [ 119s] checking whether __SUNPRO_C is declared... no [ 119s] checking for pkg-config... /usr/bin/pkg-config [ 119s] checking pkg-config is at least version 0.9.0... yes [ 119s] checking build system type... armv7l-unknown-linux-gnu [ 119s] checking host system type... armv7l-unknown-linux-gnu [ 119s] checking for a sed that does not truncate output... /bin/sed [ 119s] checking if gcc -std=gnu99 supports -Werror=unknown-warning-option... no [ 119s] checking if gcc -std=gnu99 supports -Werror=unused-command-line-argument... no [ 119s] checking if gcc -std=gnu99 supports-Wall... yes [ 119s] checking if gcc -std=gnu99 supports-Wpointer-arith... yes [ 119s] checking if gcc -std=gnu99 supports-Wmissing-declarations... yes [ 119s] checking if gcc -std=gnu99 supports-Wformat=2... yes [ 119s] checking if gcc -std=gnu99 supports-Wstrict-prototypes... yes [ 119s] checking if gcc -std=gnu99 supports-Wmissing-prototypes... yes [ 120s] checking if gcc -std=gnu99 supports-Wnested-externs... yes [ 120s] checking if gcc -std=gnu99 supports-Wbad-function-cast... yes [ 120s] checking if gcc -std=gnu99 supports-Wold-style-definition... yes [ 120s] checking if gcc -std=gnu99 supports-Wdeclaration-after-statement... yes [ 120s] checking if gcc -std=gnu99 supports-Wunused... yes [ 120s] checking if gcc -std=gnu99 supports-Wuninitialized... yes [ 120s] checking if gcc -std=gnu99 supports-Wshadow... yes [ 120s] checking if gcc -std=gnu99 supports-Wcast-qual... yes [ 120s] checking if gcc -std=gnu99 supports-Wmissing-noreturn... yes [ 120s] checking if gcc -std=gnu99 supports-Wmissing-format-attribute... yes [ 120s] checking if gcc -std=gnu99 supports-Wredundant-decls... yes [ 120s] checking if gcc -std=gnu99 supports-Werror=implicit... yes [ 120s] checking if gcc -std=gnu99 supports-Werror=nonnull... yes [ 120s] checking if gcc -std=gnu99 supports-Werror=init-self... yes [ 120s] checking if gcc -std=gnu99 supports-Werror=main... yes [ 120s] checking if gcc -std=gnu99 supports-Werror=missing-braces... yes [ 120s] checking if gcc -std=gnu99 supports-Werror=sequence-point... yes [ 120s] checking if gcc -std=gnu99 supports-Werror=return-type... yes [ 120s] checking if gcc -std=gnu99 supports-Werror=trigraphs... yes [ 120s] checking if gcc -std=gnu99 supports-Werror=array-bounds... yes [ 120s] checking if gcc -std=gnu99 supports-Werror=write-strings... yes [ 120s] checking if gcc -std=gnu99 supports-Werror=address... yes [ 120s] checking if gcc -std=gnu99 supports-Werror=int-to-pointer-cast... yes [ 120s] checking if gcc -std=gnu99 supports-Werror=pointer-to-int-cast... yes [ 120s] checking if gcc -std=gnu99 supports-pedantic... yes [ 120s] checking if gcc -std=gnu99 supports-Werror... yes [ 120s] checking if gcc -std=gnu99 supports-Werror=attributes... yes [ 120s] checking for cpp... /usr/bin/cpp [ 120s] checking if /usr/bin/cpp requires -undef... yes [ 121s] checking if /usr/bin/cpp requires -traditional... yes [ 121s] checking for launchd... no [ 121s] checking for XINIT... yes [ 121s] checking for mcookie... /usr/bin/mcookie [ 121s] configure: creating ./config.status [ 121s] config.status: creating Makefile [ 121s] config.status: creating man/Makefile [ 121s] config.status: creating launchd/Makefile [ 121s] config.status: creating launchd/privileged_startx/Makefile [ 121s] config.status: creating launchd/user_startx/Makefile [ 121s] config.status: creating config.h [ 121s] config.status: executing depfiles commands [ 121s] + make -j4 XINITDIR=/etc/X11/xinit [ 121s] make all-recursive [ 121s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.3.2' [ 121s] Making all in man [ 121s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.3.2/man' [ 121s] GEN startx.1 [ 121s] GEN xinit.1 [ 121s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.3.2/man' [ 121s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.3.2' [ 121s] CC xinit.o [ 121s] GEN startx [ 121s] GEN xinitrc [ 121s] xinit.c:93:31: warning: initialization discards qualifiers from pointer target type [ 121s] xinit.c:94:32: warning: initialization discards qualifiers from pointer target type [ 121s] xinit.c:95:1: warning: initialization discards qualifiers from pointer target type [ 121s] xinit.c:95:1: warning: initialization discards qualifiers from pointer target type [ 121s] xinit.c:95:1: warning: initialization discards qualifiers from pointer target type [ 121s] xinit.c:95:1: warning: initialization discards qualifiers from pointer target type [ 121s] xinit.c:95:1: warning: initialization discards qualifiers from pointer target type [ 121s] xinit.c: In function 'Execute': [ 121s] xinit.c:140:9: warning: assignment discards qualifiers from pointer target type [ 121s] xinit.c: In function 'waitforserver': [ 121s] xinit.c:356:13: warning: passing argument 2 of 'processTimeout' discards qualifiers from pointer target type [ 121s] xinit.c:110:13: note: expected 'char *' but argument is of type 'const char *' [ 121s] xinit.c: In function 'startServer': [ 121s] xinit.c:395:19: warning: declaration of 'server' shadows a global declaration [ 121s] xinit.c:98:15: warning: shadowed declaration is here [ 121s] xinit.c:450:9: warning: passing argument 2 of 'processTimeout' discards qualifiers from pointer target type [ 121s] xinit.c:370:1: note: expected 'char *' but argument is of type 'const char *' [ 121s] xinit.c: In function 'startClient': [ 121s] xinit.c:561:19: warning: declaration of 'client' shadows a global declaration [ 121s] xinit.c:99:15: warning: shadowed declaration is here [ 121s] xinit.c: In function 'shutdown': [ 121s] xinit.c:620:5: warning: passing argument 2 of 'processTimeout' discards qualifiers from pointer target type [ 121s] xinit.c:370:1: note: expected 'char *' but argument is of type 'const char *' [ 121s] xinit.c:631:5: warning: passing argument 2 of 'processTimeout' discards qualifiers from pointer target type [ 121s] xinit.c:370:1: note: expected 'char *' but argument is of type 'const char *' [ 121s] xinit.c: In function 'verror': [ 121s] xinit.c:646:5: warning: function might be possible candidate for 'gnu_printf' format attribute [ 121s] xinit.c: In function 'verrorx': [ 121s] xinit.c:654:5: warning: function might be possible candidate for 'gnu_printf' format attribute [ 121s] xinit.c: In function 'Fatal': [ 121s] xinit.c:659:1: warning: function might be possible candidate for attribute 'noreturn' [ 121s] xinit.c: In function 'Fatalx': [ 121s] xinit.c:669:1: warning: function might be possible candidate for attribute 'noreturn' [ 122s] xinit.c: In function 'ignorexio': [ 122s] xinit.c:588:1: warning: function might be possible candidate for attribute 'noreturn' [ 122s] CCLD xinit [ 122s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.3.2' [ 122s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.3.2' [ 122s] + exit 0 [ 122s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.ci7V8x [ 122s] + umask 022 [ 122s] + cd /home/abuild/rpmbuild/BUILD [ 122s] + cd xorg-x11-xinit-1.3.2 [ 122s] + LANG=C [ 122s] + export LANG [ 122s] + unset DISPLAY [ 122s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.3.2-7.3.arm [ 122s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.3.2-7.3.arm [ 122s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.3.2-7.3.arm [ 122s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.3.2-7.3.arm/usr/share/license [ 122s] + cp -af COPYING /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.3.2-7.3.arm/usr/share/license/xorg-x11-xinit [ 122s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.3.2-7.3.arm [ 122s] Making install in man [ 122s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.3.2/man' [ 122s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.3.2/man' [ 122s] make[2]: Nothing to be done for `install-exec-am'. [ 122s] test -z "/usr/share/man/man1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.3.2-7.3.arm/usr/share/man/man1" [ 122s] /usr/bin/install -c -m 644 startx.1 xinit.1 '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.3.2-7.3.arm/usr/share/man/man1' [ 122s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.3.2/man' [ 122s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.3.2/man' [ 122s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.3.2' [ 122s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.3.2' [ 122s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.3.2-7.3.arm/usr/bin" [ 122s] /usr/bin/install -c xinit '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.3.2-7.3.arm/usr/bin' [ 122s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.3.2-7.3.arm/usr/bin" [ 122s] /usr/bin/install -c startx '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.3.2-7.3.arm/usr/bin' [ 122s] test -z "/usr/lib/X11/xinit" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.3.2-7.3.arm/usr/lib/X11/xinit" [ 122s] /usr/bin/install -c -m 644 xinitrc '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.3.2-7.3.arm/usr/lib/X11/xinit' [ 122s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.3.2' [ 122s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.3.2' [ 122s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.3.2-7.3.arm/usr/share/info [ 122s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.3.2-7.3.arm/usr/share/doc [ 122s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.3.2-7.3.arm/usr/share/doc/xorg-x11-xinit [ 122s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.3.2-7.3.arm/usr/share/gtk-doc [ 122s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.3.2-7.3.arm/usr/share/man [ 122s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.3.2-7.3.arm -regex '.*/man/man./.*.[0-9]' [ 122s] + xargs rm -f -- [ 122s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.3.2-7.3.arm -regex '.*/man/../man./.*.[0-9]' [ 122s] + xargs rm -f -- [ 122s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.3.2-7.3.arm -regex '.*/man/man./.*.[0-9]pm' [ 122s] + xargs rm -f -- [ 122s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.3.2 [ 122s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.3.2-7.3.arm/usr/bin/xinit [ 122s] 35 blocks [ 122s] + /usr/lib/rpm/check-buildroot [ 122s] + /usr/lib/rpm//brp-compress [ 122s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 122s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 122s] + /usr/lib/rpm/brp-python-bytecompile [ 122s] + /usr/lib/rpm/brp-python-hardlink [ 122s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.3.2-7.3.arm [ 122s] Processing files: xorg-x11-xinit-1.3.2-7.3.armv7l [ 122s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 122s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libX11.so.6 libc.so.6 libc.so.6(GLIBC_2.11) libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) [ 122s] Processing files: xorg-x11-xinit-debuginfo-1.3.2-7.3.armv7l [ 122s] Processing files: xorg-x11-xinit-debugsource-1.3.2-7.3.armv7l [ 122s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.3.2-7.3.arm [ 122s] warning: Installed (but unpackaged) file(s) found: [ 122s] /usr/bin/startx [ 122s] /usr/lib/X11/xinit/xinitrc [ 122s] Wrote: /home/abuild/rpmbuild/SRPMS/xorg-x11-xinit-1.3.2-7.3.src.rpm [ 122s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-xinit-1.3.2-7.3.armv7l.rpm [ 122s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-xinit-debuginfo-1.3.2-7.3.armv7l.rpm [ 122s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-xinit-debugsource-1.3.2-7.3.armv7l.rpm [ 122s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.YsjdQz [ 122s] + umask 022 [ 122s] + cd /home/abuild/rpmbuild/BUILD [ 122s] + cd xorg-x11-xinit-1.3.2 [ 122s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.3.2-7.3.arm [ 122s] + exit 0 [ 122s] ... checking for files with abuild user/group [ 122s] ... creating baselibs [ 123s] ... comparing built packages with the former built [ 123s] /usr/lib/build/rpm-check.sh [ 123s] compare /.build.oldpackages/xorg-x11-xinit-1.3.2-7.2.src.rpm /home/abuild/rpmbuild/SRPMS/xorg-x11-xinit-1.3.2-7.3.src.rpm [ 123s] compare /.build.oldpackages/xorg-x11-xinit-1.3.2-7.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-xinit-1.3.2-7.3.armv7l.rpm [ 123s] --- /tmp/tmp.lZbCGNuRKD 2013-10-10 22:11:27.298826340 +0000 [ 123s] +++ /tmp/tmp.Uy1AdRmnt6 2013-10-10 22:11:27.310826340 +0000 [ 123s] @@ -1,7 +1,7 @@ [ 123s] xorg-x11-xinit 1.3.2 (none) [ 123s] X.Org X11 X Window System xinit startup scripts [ 123s] X.Org X11 X Window System xinit startup scripts [ 123s] - tizen Tizen:2.0:Panda obs://w08.vlan200.tizen.org/Tizen:2.0:Panda/standard/2b3dab5180c0b5c34f5b5ee997c735e7-xorg-x11-xinit MIT MIT [ 123s] + tizen Tizen:2.0:Panda obs://w16.vlan200.tizen.org/Tizen:2.0:Panda/standard/2b3dab5180c0b5c34f5b5ee997c735e7-xorg-x11-xinit MIT MIT [ 123s] User Interface/X http://www.x.org (none) (none) (none) [ 123s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 123s] cpio gzip 9 [ 123s] RPM meta information is different [ 123s] compare /.build.oldpackages/xorg-x11-xinit-debuginfo-1.3.2-7.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-xinit-debuginfo-1.3.2-7.3.armv7l.rpm [ 123s] --- /tmp/tmp.Jx3w3G7CH0 2013-10-10 22:11:27.354826337 +0000 [ 123s] +++ /tmp/tmp.UjW19t2hKO 2013-10-10 22:11:27.366826337 +0000 [ 123s] @@ -3,7 +3,7 @@ [ 123s] This package provides debug information for package xorg-x11-xinit. [ 123s] Debug information is useful when developing applications that use this [ 123s] package or when debugging this package. [ 123s] - tizen Tizen:2.0:Panda obs://w08.vlan200.tizen.org/Tizen:2.0:Panda/standard/2b3dab5180c0b5c34f5b5ee997c735e7-xorg-x11-xinit MIT MIT [ 123s] + tizen Tizen:2.0:Panda obs://w16.vlan200.tizen.org/Tizen:2.0:Panda/standard/2b3dab5180c0b5c34f5b5ee997c735e7-xorg-x11-xinit MIT MIT [ 123s] Development/Debug http://www.x.org (none) (none) (none) [ 123s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 123s] cpio gzip 9 [ 123s] RPM meta information is different [ 123s] compare /.build.oldpackages/xorg-x11-xinit-debugsource-1.3.2-7.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-xinit-debugsource-1.3.2-7.3.armv7l.rpm [ 123s] --- /tmp/tmp.nbjRbaO1sL 2013-10-10 22:11:27.414826337 +0000 [ 123s] +++ /tmp/tmp.4Z7PWxkzJI 2013-10-10 22:11:27.422826338 +0000 [ 123s] @@ -3,7 +3,7 @@ [ 123s] This package provides debug sources for package xorg-x11-xinit. [ 123s] Debug sources are useful when developing applications that use this [ 123s] package or when debugging this package. [ 123s] - tizen Tizen:2.0:Panda obs://w08.vlan200.tizen.org/Tizen:2.0:Panda/standard/2b3dab5180c0b5c34f5b5ee997c735e7-xorg-x11-xinit MIT MIT [ 123s] + tizen Tizen:2.0:Panda obs://w16.vlan200.tizen.org/Tizen:2.0:Panda/standard/2b3dab5180c0b5c34f5b5ee997c735e7-xorg-x11-xinit MIT MIT [ 123s] Development/Debug http://www.x.org (none) (none) (none) [ 123s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 123s] cpio gzip 9 [ 123s] RPM meta information is different [ 123s] ... saving built statistics [ 124s] /.build/build: line 3144: mount: command not found [ 124s] ERROR: no root disk device found, yet another new device name? [ 124s] ls: cannot access /sys/block/: No such file or directory [ 124s] umount: /sys: not mounted [ 124s] ... saving built packages [ 124s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-xinit-1.3.2-7.3.armv7l.rpm [ 124s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-xinit-debuginfo-1.3.2-7.3.armv7l.rpm [ 124s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-xinit-debugsource-1.3.2-7.3.armv7l.rpm [ 124s] /home/abuild/rpmbuild/SRPMS/xorg-x11-xinit-1.3.2-7.3.src.rpm [ 124s] /home/abuild/rpmbuild/OTHER/_statistics [ 124s] [ 124s] w16 finished "build xorg-x11-xinit.spec" at Thu Oct 10 22:11:27 UTC 2013. [ 124s] [ 125s] /.build/build: line 391: mount: command not found [ 125s] /.build/build: line 368: 298 Killed background_monitor_process [ 127s] Warning: VM doesn't support sysrq and /sbin/halt not installed [ 127s] Warning: clean shut down of the VM didn't work [ 127s] [ 120.003646] Kernel panic - not syncing: Attempted to kill init! [ 127s] [ 120.004183] Pid: 1, comm: qemu-arm Not tainted 3.1.9-1.4-default #1 [ 127s] [ 120.004612] Call Trace: [ 127s] [ 120.004796] [] dump_trace+0x9a/0x270 [ 127s] [ 120.005165] [] dump_stack+0x69/0x6f [ 127s] [ 120.005527] [] panic+0x95/0x1a9 [ 127s] [ 120.005866] [] forget_original_parent+0x244/0x250 [ 127s] [ 120.006325] [] exit_notify+0x10/0x160 [ 127s] [ 120.006699] [] do_exit+0x1dd/0x410 [ 127s] [ 120.007054] [] do_group_exit+0x41/0xb0 [ 127s] [ 120.007434] [] sys_exit_group+0x12/0x20 [ 127s] [ 120.007819] [] system_call_fastpath+0x16/0x1b [ 127s] [ 120.008253] [<00000000601208d9>] 0x601208d8 [ 128s] [ 120.008719] Rebooting in 1 seconds..build: extracting built packages... [ 128s] xorg-x11-xinit-1.3.2-7.3.armv7l.rpm [ 128s] xorg-x11-xinit-debuginfo-1.3.2-7.3.armv7l.rpm [ 128s] xorg-x11-xinit-debugsource-1.3.2-7.3.armv7l.rpm [ 128s] xorg-x11-xinit-1.3.2-7.3.src.rpm [ 128s] _statistics