[ 0s] Using BUILD_ROOT=/srv/build/root_3/.mount [ 0s] Using BUILD_ARCH=armv7el [ 0s] Doing kvm build in /srv/build/root_3/root [ 0s] [ 0s] [ 0s] w03 started "build capi-system-power.spec" at Thu Nov 7 14:10:50 UTC 2013. [ 0s] [ 0s] Building capi-system-power for project 'Tizen:2.2:Main' repository 'standard' arch 'armv7el' srcmd5 '32d748bdf47235226034e1caa686817a' [ 0s] [ 0s] processing specfile /srv/build/root_3/.build-srcdir/capi-system-power.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_3/.build-srcdir/capi-system-power.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/3/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_3/.build.rpmlist /srv/build/root_3/.build-srcdir/capi-system-power.spec build rpmlint-Factory ... [ 0s] hostname: Name or service not known [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc-common -> eglibc [ 0s] cycle: libgcc -> eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: libgcc -> eglibc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm -> rpm-libs [ 0s] [1/56] preinstalling libgcc... [ 0s] [2/56] preinstalling setup... [ 0s] [3/56] preinstalling filesystem... [ 0s] [4/56] preinstalling eglibc... [ 0s] [5/56] preinstalling eglibc-common... [ 1s] [6/56] preinstalling bash... [ 1s] [7/56] preinstalling bzip2-libs... [ 1s] [8/56] preinstalling diffutils... [ 1s] [9/56] preinstalling elfutils-libelf... [ 1s] [10/56] preinstalling libattr... [ 1s] [11/56] preinstalling liblua... [ 1s] [12/56] preinstalling libstdc++... [ 1s] [13/56] preinstalling ncurses-libs... [ 1s] [14/56] preinstalling nspr... [ 1s] [15/56] preinstalling nss-softokn-freebl... [ 1s] [16/56] preinstalling popt... [ 1s] [17/56] preinstalling readline... [ 1s] [18/56] preinstalling sed... [ 1s] [19/56] preinstalling sqlite... [ 1s] [20/56] preinstalling xz-libs... [ 1s] [21/56] preinstalling zlib... [ 1s] [22/56] preinstalling qemu.x86_64... [ 1s] [23/56] preinstalling libcap... [ 1s] [24/56] preinstalling libacl... [ 1s] [25/56] preinstalling libfile... [ 1s] [26/56] preinstalling bzip2... [ 1s] [27/56] preinstalling nss... [ 1s] [28/56] preinstalling tar... [ 1s] [29/56] preinstalling coreutils... [ 1s] [30/56] preinstalling file... [ 1s] [31/56] preinstalling rpm... [ 1s] [32/56] preinstalling tizen-accelerator... [ 1s] [33/56] preinstalling rpm-libs... [ 2s] [34/56] preinstalling gmp-x86-arm... [ 2s] [35/56] preinstalling mpc-x86-arm... [ 2s] [36/56] preinstalling mpfr-x86-arm... [ 2s] [37/56] preinstalling bzip2-libs-x86-arm... [ 2s] [38/56] preinstalling eglibc-x86-arm... [ 2s] [39/56] preinstalling elfutils-libelf-x86-arm... [ 2s] [40/56] preinstalling libacl-x86-arm... [ 2s] [41/56] preinstalling libattr-x86-arm... [ 2s] [42/56] preinstalling libcap-x86-arm... [ 2s] [43/56] preinstalling libfile-x86-arm... [ 2s] [44/56] preinstalling libgcc-x86-arm... [ 2s] [45/56] preinstalling liblua-x86-arm... [ 2s] [46/56] preinstalling ncurses-libs-x86-arm... [ 2s] [47/56] preinstalling nspr-x86-arm... [ 2s] [48/56] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [49/56] preinstalling nss-x86-arm... [ 2s] [50/56] preinstalling popt-x86-arm... [ 2s] [51/56] preinstalling rpm-libs-x86-arm... [ 2s] [52/56] preinstalling sqlite-x86-arm... [ 2s] [53/56] preinstalling xz-libs-x86-arm... [ 2s] [54/56] preinstalling zlib-x86-arm... [ 2s] [55/56] preinstalling bash-x86-arm... [ 2s] [56/56] preinstalling rpm-x86-arm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 2s] copying packages... [ 3s] reordering...cycle: bash -> eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> bash [ 3s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 3s] breaking dependency eglibc-common -> coreutils [ 3s] cycle: eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> findutils [ 3s] breaking dependency eglibc-common -> findutils [ 3s] cycle: eglibc -> eglibc-common -> grep [ 3s] breaking dependency grep -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 3s] breaking dependency grep -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 3s] breaking dependency libpcre -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 3s] breaking dependency libpcre -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 3s] breaking dependency libstdc++ -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 3s] breaking dependency eglibc-common -> grep [ 3s] cycle: eglibc -> eglibc-common -> libgcc [ 3s] breaking dependency eglibc -> eglibc-common [ 3s] cycle: eglibc -> libgcc [ 3s] breaking dependency libgcc -> eglibc [ 3s] cycle: filesystem -> setup [ 3s] breaking dependency setup -> filesystem [ 3s] cycle: ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses [ 3s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses-base [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl -> perl-libs [ 3s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 3s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl -> perl-IO-Compress-Zlib [ 3s] breaking dependency perl -> perl-IO-Compress-Zlib [ 3s] cycle: perl -> perl-IO-Compress-Base [ 3s] breaking dependency perl -> perl-IO-Compress-Base [ 3s] cycle: perl -> perl-Module-Pluggable [ 3s] breaking dependency perl -> perl-Module-Pluggable [ 3s] cycle: perl -> perl-Pod-Simple [ 3s] breaking dependency perl -> perl-Pod-Simple [ 3s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 3s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 3s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 3s] cycle: dbus-libs -> dbus [ 3s] breaking dependency dbus -> dbus-libs [ 3s] cycle: systemd -> libudev -> udev [ 3s] breaking dependency systemd -> libudev [ 3s] cycle: nss -> nss-sysinit [ 3s] breaking dependency nss -> nss-sysinit [ 3s] cycle: perl-CPAN -> perl-Test-Harness [ 3s] breaking dependency perl-Test-Harness -> perl-CPAN [ 3s] cycle: rpm-libs -> rpm [ 3s] breaking dependency rpm -> rpm-libs [ 3s] done [ 11s] booting kvm ... [ 11s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8192 -drive file=/srv/build/root_3/root,if=virtio,cache=none -drive file=/srv/build/root_3/root,if=ide,index=0,cache=none -drive file=/srv/build/root_3/swap,if=virtio,cache=none -smp 4 [ 14s] doing fast boot [ 16s] Creating device nodes with udev [ 23s] Waiting for device /dev/vda to appear: ok [ 23s] fsck from util-linux 2.21.2 [ 23s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 23s] /dev/vda: clean, 6878/2097152 files, 242695/8388608 blocks [ 23s] fsck succeeded. Mounting root device read-write. [ 23s] Mounting root /dev/vda [ 23s] mount -o rw -t ext4 /dev/vda /root [ 24s] replacing /etc/mtab with symlink to /proc/self/mounts [ 24s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 29s] 2nd stage started in virtual machine [ 29s] machine type: armv7l [ 29s] switching personality to 8... [ 29s] 2nd stage started in virtual machine [ 29s] machine type: armv7l [ 30s] swapon on /dev/vdb [ 30s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 30s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 31s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 31s] logging output to //.build.log... [ 31s] processing specfile /.build-srcdir/capi-system-power.spec ... [ 32s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/capi-system-power.spec build rpmlint-Factory ... [ 33s] running rpm-x86-arm postinstall script [ 33s] /bin/rpm [ 33s] /usr/bin/rpm2cpio [ 33s] /usr/bin/rpmdb [ 33s] /usr/bin/rpmquery [ 33s] /usr/bin/rpmsign [ 33s] /usr/bin/rpmverify [ 33s] running rpm-libs-x86-arm postinstall script [ 33s] running tizen-accelerator postinstall script [ 33s] running bash-x86-arm postinstall script [ 33s] initializing rpm db... [ 38s] [1/173] installing capi-base-common-0.1.0-9.3 [ 38s] [2/173] installing kernel-headers-3.0.15-1.10 [ 38s] [3/173] installing libX11-common-1.5.0-3.4 [ 38s] [4/173] installing tizen-release-2.2.0-1.9 [ 38s] [5/173] installing tzdata-2011h-1.10 [ 38s] [6/173] installing libgcc-4.5.3-2.33 [ 39s] [7/173] installing setup-0.1-2.6 [ 39s] [8/173] installing filesystem-0.1-1.9 [ 39s] warning: group lock does not exist - using root [ 39s] warning: group mail does not exist - using root [ 39s] [9/173] installing eglibc-2.13-2.18 [ 40s] [10/173] installing libstdc++-4.5.3-2.33 [ 40s] [11/173] installing eglibc-common-2.13-2.18 [ 42s] /var/tmp/rpm-tmp.nSHV51: line 2: /usr/bin/xargs: No such file or directory [ 42s] [12/173] installing libstdc++-devel-4.5.3-2.33 [ 42s] [13/173] installing bash-4.1-4.9 [ 43s] [14/173] installing bzip2-libs-1.0.5-5.12 [ 43s] [15/173] installing c-ares-1.7.4-3.22 [ 43s] [16/173] installing cpio-2.8-4.8 [ 43s] [17/173] installing diffutils-3.0-4.8 [ 43s] [18/173] installing e2fsprogs-libs-1.41.9-3.8 [ 43s] [19/173] installing elfutils-libelf-0.152-2.16 [ 43s] [20/173] installing expat-2.0.1-8.12 [ 43s] [21/173] installing fdupes-1.40-42.10 [ 43s] [22/173] installing findutils-4.2.31-2.8 [ 44s] [23/173] installing gdbm-1.8.3-2.33 [ 44s] [24/173] installing kmod-5-5.1 [ 44s] [25/173] installing libXau-1.0.7-1.8 [ 44s] [26/173] installing libattr-2.4.44-8.12 [ 44s] [27/173] installing libffi-3.0.9-101.1 [ 45s] [28/173] installing libgomp-4.5.3-2.33 [ 45s] [29/173] installing libidn-1.15-7.29 [ 45s] [30/173] installing liblua-5.1.4-7.7 [ 45s] [31/173] installing libslp-pm-1.2.4-3.1 [ 45s] [32/173] installing libuuid-2.20.2-7.7 [ 45s] [33/173] installing lzo-2.03-2.18 [ 45s] [34/173] installing m4-1.4.14-1.9 [ 45s] [35/173] installing make-3.81-1.12 [ 45s] [36/173] installing net-tools-1.60-88.9 [ 46s] [37/173] installing nspr-4.8.7-1.17 [ 46s] [38/173] installing nss-softokn-freebl-3.12.9-3.28 [ 46s] [39/173] installing patch-2.6.1.169-1.9 [ 46s] [40/173] installing pkgconfig-0.25-3.11 [ 46s] [41/173] installing popt-1.16-4.11 [ 46s] [42/173] installing readline-5.2-14.7 [ 46s] [43/173] installing sed-4.1.5-3.8 [ 46s] [44/173] installing smack-1.0slp2+s12-1.11 [ 46s] [45/173] installing sqlite-3.7.13-1.12 [ 46s] [46/173] installing xz-libs-5.0.3-2.17 [ 46s] [47/173] installing zlib-1.2.5-3.18 [ 47s] [48/173] installing gmp-5.0.1-2.16 [ 47s] [49/173] installing libpcre-7.7-4.44 [ 47s] [50/173] installing ncurses-libs-5.7-4.11 [ 47s] [51/173] installing build-compare-2009.10.14-26.14 [ 47s] [52/173] installing qemu.x86_64-1.2-2.10 [ 50s] [53/173] installing vconf-internal-keys-devel-0.0.82-3.1 [ 50s] [54/173] installing capi-base-common-devel-0.1.0-9.3 [ 50s] [55/173] installing eglibc-headers-2.13-2.18 [ 51s] [56/173] installing libcap-2.21-2.10 [ 51s] [57/173] installing libslp-pm-devel-1.2.4-3.1 [ 51s] [58/173] installing unzip-6.0-10.16 [ 51s] [59/173] installing zlib-devel-1.2.5-3.18 [ 51s] [60/173] installing grep-2.5.1a-63.9 [ 51s] [61/173] installing libacl-2.2.49-3.12 [ 52s] [62/173] installing libfile-5.04-2.11 [ 52s] [63/173] installing libxcb-1.8.1-1.7 [ 52s] [64/173] installing libxml2-2.7.8-10.3 [ 52s] [65/173] installing lzo-minilzo-2.03-2.18 [ 52s] [66/173] installing mpfr-3.0.0-1.16 [ 52s] [67/173] installing ncurses-5.7-4.11 [ 52s] [68/173] installing binutils-2.22-1.12 [ 53s] [69/173] installing bzip2-1.0.5-5.12 [ 53s] [70/173] installing glib2-2.32.3-6.3 [ 53s] [71/173] installing libblkid-2.20.2-7.7 [ 53s] [72/173] installing smack-utils-1.0slp2+s12-1.11 [ 53s] [73/173] installing xz-5.0.3-2.17 [ 54s] [74/173] installing elfutils-libs-0.152-2.16 [ 54s] [75/173] installing nss-3.12.9-3.28 [ 55s] [76/173] installing perl-5.12.1-62.8 [ 57s] [77/173] installing ncurses-base-5.7-4.11 [ 57s] [78/173] installing perl-HTML-Tagset-3.20-8.3 [ 57s] [79/173] installing perl-IO-Compress-Base-2.008-62.8 [ 57s] [80/173] installing perl-Module-Pluggable-3.60-62.8 [ 57s] [81/173] installing perl-Pod-Escapes-1.04-62.8 [ 57s] [82/173] installing perl-TimeDate-1.20-1.3 [ 57s] [83/173] installing eglibc-devel-2.13-2.18 [ 57s] [84/173] installing lzo-devel-2.03-2.18 [ 58s] [85/173] installing perl-Compress-Raw-Zlib-2.008-62.8 [ 58s] [86/173] installing perl-devel-5.12.1-62.8 [ 58s] [87/173] installing perl-libs-5.12.1-62.8 [ 58s] [88/173] installing tar-1.17-5.11 [ 58s] [89/173] installing coreutils-6.9-9.12 [ 59s] [90/173] installing file-5.04-2.11 [ 59s] [91/173] installing libX11-1.5.0-3.4 [ 59s] [92/173] installing libdlog-0.4.1-17.4 [ 59s] chown: `root:app_logging': invalid user [ 59s] [93/173] installing libmount-2.20.2-7.7 [ 59s] [94/173] installing mpc-0.9-1.16 [ 59s] [95/173] installing openssl-1.0.1c-2.26 [ 60s] [96/173] installing xz-lzma-compat-5.0.3-2.17 [ 60s] [97/173] installing elfutils-0.152-2.16 [ 60s] [98/173] installing nss-sysinit-3.12.9-3.28 [ 60s] [99/173] installing libdlog-devel-0.4.1-17.4 [ 60s] [100/173] installing perl-ExtUtils-ParseXS-2.18-62.8 [ 60s] [101/173] installing perl-Pod-Simple-3.07-62.8 [ 60s] [102/173] installing perl-Test-Simple-0.80-62.8 [ 60s] [103/173] installing tizen-accelerator-1.0.1-1.14 [ 61s] [104/173] installing perl-IO-Compress-Zlib-2.008-62.8 [ 61s] [105/173] installing perl-Test-Harness-3.12-62.8 [ 61s] [106/173] installing gawk-3.1.5-2.9 [ 61s] [107/173] installing gzip-1.3.14-3.8 [ 61s] [108/173] installing pam-1.1.5-3.6 [ 61s] [109/173] installing build-2011.01.10a-1.9 [ 61s] [110/173] installing libcurl-7.28.1-3.26 [ 61s] [111/173] installing cpp-4.5.3-2.33 [ 61s] [112/173] installing dbus-1.6.4-7.1 [ 62s] warning: group dbus does not exist - using root [ 62s] [113/173] installing util-linux-2.20.2-7.7 [ 62s] warning: group tty does not exist - using root [ 62s] /bin/chown: `root:root': invalid user [ 62s] [114/173] installing libarchive-2.8.3-3.2 [ 62s] [115/173] installing glib2-devel-2.32.3-6.3 [ 62s] [116/173] installing bzip2-libs-x86-arm-1.0.5-9.7 [ 62s] [117/173] installing dbus-libs-1.6.4-7.1 [ 63s] [118/173] installing eglibc-x86-arm-2.13-9.7 [ 63s] [119/173] installing elfutils-libelf-x86-arm-0.152-9.7 [ 63s] [120/173] installing elfutils-libs-x86-arm-0.152-9.7 [ 63s] [121/173] installing gmp-x86-arm-5.0.1-9.7 [ 64s] [122/173] installing libacl-x86-arm-2.2.49-9.7 [ 64s] [123/173] installing libattr-x86-arm-2.4.44-9.7 [ 64s] [124/173] installing libcap-x86-arm-2.21-9.6 [ 64s] [125/173] installing libfile-x86-arm-5.04-9.7 [ 65s] [126/173] installing libgcc-x86-arm-4.5.3-9.7 [ 65s] [127/173] installing liblua-x86-arm-5.1.4-9.7 [ 65s] [128/173] installing mpc-x86-arm-0.9-9.7 [ 65s] [129/173] installing mpfr-x86-arm-3.0.0-9.7 [ 65s] [130/173] installing ncurses-libs-x86-arm-5.7-9.6 [ 65s] [131/173] installing nspr-x86-arm-4.8.7-9.7 [ 66s] [132/173] installing nss-softokn-freebl-x86-arm-3.12.9-9.7 [ 66s] [133/173] installing nss-x86-arm-3.12.9-9.7 [ 66s] [134/173] installing perl-ExtUtils-MakeMaker-6.36-62.8 [ 66s] [135/173] installing popt-x86-arm-1.16-9.7 [ 66s] [136/173] installing sqlite-x86-arm-3.7.13-9.6 [ 66s] [137/173] installing xz-libs-x86-arm-5.0.3-9.7 [ 67s] [138/173] installing zlib-x86-arm-1.2.5-7.6 [ 67s] [139/173] installing curl-7.28.1-3.26 [ 67s] [140/173] installing cmake-2.8.5-1.3 [ 67s] [141/173] installing gcc-4.5.3-2.33 [ 67s] [142/173] installing perl-CPAN-1.9205-62.8 [ 67s] [143/173] installing bash-x86-arm-4.1-7.7 [ 68s] [144/173] installing fdupes-x86-arm-1.40-9.7 [ 68s] [145/173] installing findutils-x86-arm-4.2.31-7.7 [ 68s] [146/173] installing gawk-x86-arm-3.1.5-7.7 [ 68s] [147/173] installing gzip-x86-arm-1.3.14-9.7 [ 68s] [148/173] installing make-x86-arm-3.81-8.6 [ 68s] [149/173] installing patch-x86-arm-2.6.1.169-7.7 [ 68s] [150/173] installing sed-x86-arm-4.1.5-9.7 [ 69s] /bin/sed.orig-arm already present - skipping. [ 69s] [151/173] installing diffutils-x86-arm-3.0-9.7 [ 69s] /usr/bin/cmp.orig-arm already present - skipping. [ 69s] /usr/bin/diff.orig-arm already present - skipping. [ 69s] /usr/bin/diff3.orig-arm already present - skipping. [ 69s] /usr/bin/sdiff.orig-arm already present - skipping. [ 69s] [152/173] installing autoconf-2.68-1.9 [ 69s] [153/173] installing coreutils-x86-arm-6.9-7.7 [ 71s] [154/173] installing file-x86-arm-5.04-7.7 [ 71s] [155/173] installing tar-x86-arm-1.17-9.6 [ 71s] /bin/tar.orig-arm already present - skipping. [ 71s] [156/173] installing elfutils-x86-arm-0.152-7.8 [ 71s] [157/173] installing systemd-43-3.3 [ 72s] [158/173] installing gcc-c++-4.5.3-2.33 [ 72s] [159/173] installing rpm-4.9.1-4.12 [ 72s] [160/173] installing automake-1.11.1-3.12 [ 72s] [161/173] installing vconf-0.2.51-1.4 [ 72s] Failed to get D-Bus connection: No connection to service manager. [ 72s] warning: %post(vconf-0.2.51-1.4.armv7l) scriptlet failed, exit status 1 [ 73s] [162/173] installing udev-182-7.4 [ 73s] Failed to get D-Bus connection: No connection to service manager. [ 73s] Failed to get D-Bus connection: No connection to service manager. [ 73s] Failed to get D-Bus connection: No connection to service manager. [ 73s] Failed to get D-Bus connection: No connection to service manager. [ 73s] [163/173] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.2 [ 74s] "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " [ 74s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 74s] cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory [ 74s] cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [ 74s] [164/173] installing rpm-libs-4.9.1-4.12 [ 74s] [165/173] installing vconf-keys-devel-0.2.51-1.4 [ 74s] [166/173] installing libudev-182-7.4 [ 74s] [167/173] installing rpm-libs-x86-arm-4.9.1-10.7 [ 74s] [168/173] installing libtool-2.2.6b-2.15 [ 75s] [169/173] installing cross-armv7l-binutils-accel-armv7l-2.22-1.6 [ 75s] mv: cannot stat `/usr/bin/gprov': No such file or directory [ 75s] [170/173] installing rpm-build-4.9.1-4.12 [ 75s] [171/173] installing vconf-devel-0.2.51-1.4 [ 76s] [172/173] installing rpm-x86-arm-4.9.1-9.7 [ 80s] /bin/rpm.orig-arm already present - skipping. [ 80s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 80s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 80s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 80s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 80s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 81s] [173/173] installing rpm-build-x86-arm-4.9.1-9.7 [ 81s] /usr/bin/rpmbuild [ 81s] /usr/lib/rpm/debugedit [ 81s] now finalizing build dir... [ 81s] /.build/build: line 2680: //etc/passwd: No such file or directory [ 86s] build target is armv7l-tizen-linux [ 86s] ----------------------------------------------------------------- [ 86s] I have the following modifications for capi-system-power.spec: [ 86s] 5c5 [ 86s] < Release: 1 [ 86s] --- [ 86s] > Release: 3.3 [ 86s] ----------------------------------------------------------------- [ 86s] ----- building capi-system-power.spec (user abuild) [ 86s] ----------------------------------------------------------------- [ 86s] ----------------------------------------------------------------- [ 86s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://w03.vlan200.tizendev.org/Tizen:2.2:Main/standard/32d748bdf47235226034e1caa686817a-capi-system-power' /home/abuild/rpmbuild/SOURCES/capi-system-power.spec [ 87s] Building target platforms: armv7l-tizen-linux [ 87s] Building for target armv7l-tizen-linux [ 87s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.OwcYoW [ 87s] + umask 022 [ 87s] + cd /home/abuild/rpmbuild/BUILD [ 87s] + LANG=C [ 87s] + export LANG [ 87s] + unset DISPLAY [ 87s] + cd /home/abuild/rpmbuild/BUILD [ 87s] + rm -rf capi-system-power-0.1.1 [ 87s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/capi-system-power-0.1.1.tar.gz [ 87s] + /bin/tar -xf - [ 87s] + STATUS=0 [ 87s] + '[' 0 -ne 0 ']' [ 87s] + cd capi-system-power-0.1.1 [ 87s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 87s] + exit 0 [ 87s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.zkjTqB [ 87s] + umask 022 [ 87s] + cd /home/abuild/rpmbuild/BUILD [ 87s] + cd capi-system-power-0.1.1 [ 87s] + LANG=C [ 87s] + export LANG [ 87s] + unset DISPLAY [ 87s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 87s] + export CFLAGS [ 87s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 87s] + export CXXFLAGS [ 87s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 87s] + export FFLAGS [ 87s] + LD_AS_NEEDED=1 [ 87s] + export LD_AS_NEEDED [ 87s] + cp /home/abuild/rpmbuild/SOURCES/capi-system-power.manifest . [ 87s] ++ echo 0.1.1 [ 87s] ++ awk 'BEGIN {FS="."}{print $1}' [ 87s] + MAJORVER=0 [ 87s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 87s] + export CFLAGS [ 87s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 87s] + export CXXFLAGS [ 87s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 87s] + export FFLAGS [ 87s] + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON . -DFULLVER=0.1.1 -DMAJORVER=0 [ 88s] -- The C compiler identification is GNU [ 89s] -- The CXX compiler identification is GNU [ 89s] -- Check for working C compiler: /usr/bin/gcc [ 89s] -- Check for working C compiler: /usr/bin/gcc -- works [ 89s] -- Detecting C compiler ABI info [ 89s] -- Detecting C compiler ABI info - done [ 90s] -- Check for working CXX compiler: /usr/bin/c++ [ 90s] -- Check for working CXX compiler: /usr/bin/c++ -- works [ 90s] -- Detecting CXX compiler ABI info [ 90s] -- Detecting CXX compiler ABI info - done [ 90s] -- checking for module 'dlog pmapi vconf capi-base-common' [ 91s] -- found dlog pmapi vconf capi-base-common, version 1.0;1.2;0.2.45;0.0.1 [ 91s] -- Configuring done [ 91s] -- Generating done [ 91s] CMake Warning: [ 91s] Manually-specified variables were not used by the project: [ 91s] [ 91s] CMAKE_INSTALL_LIBDIR [ 91s] INCLUDE_INSTALL_DIR [ 91s] SHARE_INSTALL_PREFIX [ 91s] SYSCONF_INSTALL_DIR [ 91s] [ 91s] [ 91s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1 [ 91s] + make -j4 [ 91s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1 -B/home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1 --check-build-system CMakeFiles/Makefile.cmake 0 [ 91s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1/CMakeFiles /home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1/CMakeFiles/progress.marks [ 91s] make -f CMakeFiles/Makefile2 all [ 91s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1' [ 91s] make -f CMakeFiles/capi-system-power.dir/build.make CMakeFiles/capi-system-power.dir/depend [ 91s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1' [ 91s] cd /home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1 /home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1 /home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1 /home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1 /home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1/CMakeFiles/capi-system-power.dir/DependInfo.cmake --color= [ 91s] Scanning dependencies of target capi-system-power [ 91s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1' [ 91s] make -f CMakeFiles/capi-system-power.dir/build.make CMakeFiles/capi-system-power.dir/build [ 91s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1' [ 91s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1/CMakeFiles 1 [ 91s] [100%] Building C object CMakeFiles/capi-system-power.dir/src/power.c.o [ 91s] /usr/bin/gcc -Dcapi_system_power_EXPORTS -DPREFIX=\"/usr\" -DTIZEN_DEBUG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I/usr/include/dlog -I/usr/include/vconf -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -fPIC -Wall -Werror -fPIC -I/home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1/include -o CMakeFiles/capi-system-power.dir/src/power.c.o -c /home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1/src/power.c [ 92s] Linking C shared library libcapi-system-power.so [ 92s] /usr/bin/cmake -E cmake_link_script CMakeFiles/capi-system-power.dir/link.txt --verbose=1 [ 92s] /usr/bin/gcc -fPIC -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I/usr/include/dlog -I/usr/include/vconf -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -fPIC -Wall -Werror -shared -Wl,-soname,libcapi-system-power.so.0 -o libcapi-system-power.so.0.1.1 CMakeFiles/capi-system-power.dir/src/power.c.o -ldlog -lpthread -lpmapi -lvconf -lglib-2.0 [ 92s] /usr/bin/cmake -E cmake_symlink_library libcapi-system-power.so.0.1.1 libcapi-system-power.so.0 libcapi-system-power.so [ 92s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1' [ 92s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1/CMakeFiles 1 [ 92s] [100%] Built target capi-system-power [ 92s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1' [ 92s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1/CMakeFiles 0 [ 92s] + exit 0 [ 92s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.Say3ix [ 92s] + umask 022 [ 92s] + cd /home/abuild/rpmbuild/BUILD [ 92s] + cd capi-system-power-0.1.1 [ 92s] + LANG=C [ 92s] + export LANG [ 92s] + unset DISPLAY [ 92s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-power-0.1.1-3.3.arm [ 92s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-system-power-0.1.1-3.3.arm [ 92s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/capi-system-power-0.1.1-3.3.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/capi-system-power-0.1.1-3.3.arm install [ 92s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1 -B/home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1 --check-build-system CMakeFiles/Makefile.cmake 0 [ 92s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1/CMakeFiles /home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1/CMakeFiles/progress.marks [ 92s] /usr/bin/make -f CMakeFiles/Makefile2 all [ 92s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1' [ 92s] /usr/bin/make -f CMakeFiles/capi-system-power.dir/build.make CMakeFiles/capi-system-power.dir/depend [ 92s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1' [ 92s] cd /home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1 /home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1 /home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1 /home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1 /home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1/CMakeFiles/capi-system-power.dir/DependInfo.cmake --color= [ 92s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1' [ 92s] /usr/bin/make -f CMakeFiles/capi-system-power.dir/build.make CMakeFiles/capi-system-power.dir/build [ 92s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1' [ 92s] make[2]: Nothing to be done for `CMakeFiles/capi-system-power.dir/build'. [ 92s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1' [ 92s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1/CMakeFiles 1 [ 92s] [100%] Built target capi-system-power [ 92s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1' [ 92s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1/CMakeFiles 0 [ 92s] /usr/bin/make -f CMakeFiles/Makefile2 preinstall [ 92s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1' [ 92s] make[1]: Nothing to be done for `preinstall'. [ 92s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1' [ 92s] Install the project... [ 92s] /usr/bin/cmake -P cmake_install.cmake [ 92s] -- Install configuration: "" [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-power-0.1.1-3.3.arm/usr/lib/libcapi-system-power.so.0.1.1 [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-power-0.1.1-3.3.arm/usr/lib/libcapi-system-power.so.0 [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-power-0.1.1-3.3.arm/usr/lib/libcapi-system-power.so [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-power-0.1.1-3.3.arm/usr/include/system [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-power-0.1.1-3.3.arm/usr/include/system/power.h [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-power-0.1.1-3.3.arm/usr/lib/pkgconfig/capi-system-power.pc [ 92s] + rm -f /home/abuild/rpmbuild/BUILDROOT/capi-system-power-0.1.1-3.3.arm/usr/share/info/dir [ 92s] + xargs rm -f -- [ 92s] + find /home/abuild/rpmbuild/BUILDROOT/capi-system-power-0.1.1-3.3.arm -regex '.*\.la$' [ 92s] + find /home/abuild/rpmbuild/BUILDROOT/capi-system-power-0.1.1-3.3.arm -regex '.*\.a$' [ 92s] + xargs rm -f -- [ 92s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-system-power-0.1.1-3.3.arm/usr/share/license [ 92s] + cp LICENSE.APLv2 /home/abuild/rpmbuild/BUILDROOT/capi-system-power-0.1.1-3.3.arm/usr/share/license/capi-system-power [ 92s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/capi-system-power-0.1.1 [ 92s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/capi-system-power-0.1.1-3.3.arm/usr/lib/libcapi-system-power.so.0.1.1 [ 92s] symlinked /usr/lib/debug/usr/lib/libcapi-system-power.so.0.1.1.debug to /usr/lib/debug/usr/lib/libcapi-system-power.so.0.debug [ 92s] symlinked /usr/lib/debug/usr/lib/libcapi-system-power.so.0.1.1.debug to /usr/lib/debug/usr/lib/libcapi-system-power.so.debug [ 92s] 18 blocks [ 92s] + /usr/lib/rpm/check-buildroot [ 92s] + /usr/lib/rpm//brp-compress [ 92s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 92s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 93s] + /usr/lib/rpm/brp-python-bytecompile [ 93s] + /usr/lib/rpm/brp-python-hardlink [ 93s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/capi-system-power-0.1.1-3.3.arm [ 93s] Processing files: capi-system-power-0.1.1-3.3.armv7l [ 93s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 93s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cgo= [ 93s] [ 93s] Provides: libcapi-system-power.so.0 [ 93s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 93s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 93s] Requires(post): /sbin/ldconfig [ 93s] Requires(postun): /sbin/ldconfig [ 93s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libdlog.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libglib-2.0.so.0 libpmapi.so.1.2 libpthread.so.0 libvconf.so.0 [ 93s] Processing files: capi-system-power-devel-0.1.1-3.3.armv7l [ 93s] Provides: pkgconfig(capi-system-power) [ 93s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 93s] Requires: /usr/bin/pkg-config libcapi-system-power.so.0 pkgconfig(capi-base-common) [ 93s] Processing files: capi-system-power-debuginfo-0.1.1-3.3.armv7l [ 93s] Processing files: capi-system-power-debugsource-0.1.1-3.3.armv7l [ 93s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/capi-system-power-0.1.1-3.3.arm [ 93s] Wrote: /home/abuild/rpmbuild/SRPMS/capi-system-power-0.1.1-3.3.src.rpm [ 93s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-power-0.1.1-3.3.armv7l.rpm [ 93s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-power-devel-0.1.1-3.3.armv7l.rpm [ 93s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-power-debuginfo-0.1.1-3.3.armv7l.rpm [ 93s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-power-debugsource-0.1.1-3.3.armv7l.rpm [ 93s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.JNemMu [ 93s] + umask 022 [ 93s] + cd /home/abuild/rpmbuild/BUILD [ 93s] + cd capi-system-power-0.1.1 [ 93s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-power-0.1.1-3.3.arm [ 93s] + exit 0 [ 93s] ... checking for files with abuild user/group [ 93s] ... creating baselibs [ 94s] ... comparing built packages with the former built [ 94s] /usr/lib/build/rpm-check.sh [ 94s] compare /.build.oldpackages/capi-system-power-0.1.1-3.2.src.rpm /home/abuild/rpmbuild/SRPMS/capi-system-power-0.1.1-3.3.src.rpm [ 94s] compare /.build.oldpackages/capi-system-power-0.1.1-3.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-system-power-0.1.1-3.3.armv7l.rpm [ 94s] --- /tmp/tmp.OviHCVLPZb 2013-11-07 14:12:23.552226609 +0000 [ 94s] +++ /tmp/tmp.ZxpMLuPQq9 2013-11-07 14:12:23.564226609 +0000 [ 94s] @@ -1,7 +1,7 @@ [ 94s] capi-system-power 0.1.1 (none) [ 94s] A power library in SLP C API [ 94s] [ 94s] - tizen Tizen:2.2:Main obs://w04.vlan200.tizendev.org/Tizen:2.2:Main/standard/32d748bdf47235226034e1caa686817a-capi-system-power APLv2 APLv2 [ 94s] + tizen Tizen:2.2:Main obs://w03.vlan200.tizendev.org/Tizen:2.2:Main/standard/32d748bdf47235226034e1caa686817a-capi-system-power APLv2 APLv2 [ 94s] framework/system (none) (none) (none) (none) [ 94s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 94s] cpio gzip 9 [ 94s] RPM meta information is different [ 94s] compare /.build.oldpackages/capi-system-power-debuginfo-0.1.1-3.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-system-power-debuginfo-0.1.1-3.3.armv7l.rpm [ 94s] --- /tmp/tmp.6eopdXlpja 2013-11-07 14:12:23.608226608 +0000 [ 94s] +++ /tmp/tmp.2W1mvv6GCC 2013-11-07 14:12:23.616226608 +0000 [ 94s] @@ -3,7 +3,7 @@ [ 94s] This package provides debug information for package capi-system-power. [ 94s] Debug information is useful when developing applications that use this [ 94s] package or when debugging this package. [ 94s] - tizen Tizen:2.2:Main obs://w04.vlan200.tizendev.org/Tizen:2.2:Main/standard/32d748bdf47235226034e1caa686817a-capi-system-power APLv2 APLv2 [ 94s] + tizen Tizen:2.2:Main obs://w03.vlan200.tizendev.org/Tizen:2.2:Main/standard/32d748bdf47235226034e1caa686817a-capi-system-power APLv2 APLv2 [ 94s] Development/Debug (none) (none) (none) (none) [ 94s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 94s] cpio gzip 9 [ 94s] RPM meta information is different [ 94s] compare /.build.oldpackages/capi-system-power-debugsource-0.1.1-3.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-system-power-debugsource-0.1.1-3.3.armv7l.rpm [ 94s] --- /tmp/tmp.wU6wtdu6du 2013-11-07 14:12:23.692226607 +0000 [ 94s] +++ /tmp/tmp.or4JzXliYk 2013-11-07 14:12:23.704226607 +0000 [ 94s] @@ -3,7 +3,7 @@ [ 94s] This package provides debug sources for package capi-system-power. [ 94s] Debug sources are useful when developing applications that use this [ 94s] package or when debugging this package. [ 94s] - tizen Tizen:2.2:Main obs://w04.vlan200.tizendev.org/Tizen:2.2:Main/standard/32d748bdf47235226034e1caa686817a-capi-system-power APLv2 APLv2 [ 94s] + tizen Tizen:2.2:Main obs://w03.vlan200.tizendev.org/Tizen:2.2:Main/standard/32d748bdf47235226034e1caa686817a-capi-system-power APLv2 APLv2 [ 94s] Development/Debug (none) (none) (none) (none) [ 94s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 94s] cpio gzip 9 [ 94s] RPM meta information is different [ 94s] compare /.build.oldpackages/capi-system-power-devel-0.1.1-3.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-system-power-devel-0.1.1-3.3.armv7l.rpm [ 94s] --- /tmp/tmp.0rrO5gawKd 2013-11-07 14:12:23.752226607 +0000 [ 94s] +++ /tmp/tmp.MibZOyatIK 2013-11-07 14:12:23.764226607 +0000 [ 94s] @@ -1,7 +1,7 @@ [ 94s] capi-system-power-devel 0.1.1 (none) [ 94s] A power library in SLP C API (Development) [ 94s] [ 94s] - tizen Tizen:2.2:Main obs://w04.vlan200.tizendev.org/Tizen:2.2:Main/standard/32d748bdf47235226034e1caa686817a-capi-system-power APLv2 APLv2 [ 94s] + tizen Tizen:2.2:Main obs://w03.vlan200.tizendev.org/Tizen:2.2:Main/standard/32d748bdf47235226034e1caa686817a-capi-system-power APLv2 APLv2 [ 94s] TO_BE/FILLED_IN (none) (none) (none) (none) [ 94s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 94s] cpio gzip 9 [ 94s] RPM meta information is different [ 94s] ... saving built statistics [ 94s] ... saving built packages [ 94s] /home/abuild/rpmbuild/RPMS/armv7l/capi-system-power-0.1.1-3.3.armv7l.rpm [ 94s] /home/abuild/rpmbuild/RPMS/armv7l/capi-system-power-debuginfo-0.1.1-3.3.armv7l.rpm [ 94s] /home/abuild/rpmbuild/RPMS/armv7l/capi-system-power-debugsource-0.1.1-3.3.armv7l.rpm [ 94s] /home/abuild/rpmbuild/RPMS/armv7l/capi-system-power-devel-0.1.1-3.3.armv7l.rpm [ 94s] /home/abuild/rpmbuild/SRPMS/capi-system-power-0.1.1-3.3.src.rpm [ 94s] /home/abuild/rpmbuild/OTHER/_statistics [ 94s] [ 94s] w03 finished "build capi-system-power.spec" at Thu Nov 7 14:12:24 UTC 2013. [ 94s] [ 95s] /.build/build: line 368: 246 Killed background_monitor_process [ 98s] [ 84.316420] SysRq : Power Off [ 98s] [ 84.323898] Power down. [ 98s] build: extracting built packages... [ 98s] capi-system-power-0.1.1-3.3.armv7l.rpm [ 98s] capi-system-power-debuginfo-0.1.1-3.3.armv7l.rpm [ 98s] capi-system-power-debugsource-0.1.1-3.3.armv7l.rpm [ 98s] capi-system-power-devel-0.1.1-3.3.armv7l.rpm [ 98s] capi-system-power-0.1.1-3.3.src.rpm [ 98s] _statistics