[ 0s] Using BUILD_ROOT=/srv/build/root_1/.mount [ 0s] Using BUILD_ARCH=armv7el [ 0s] Doing kvm build in /srv/build/root_1/root [ 0s] [ 0s] [ 0s] w04 started "build edje.spec" at Thu Jan 2 10:42:30 UTC 2014. [ 0s] [ 0s] Building edje for project 'Tizen:2.2:Main' repository 'standard' arch 'armv7el' srcmd5 '6c55d6589bc50beb55f6a1f0483011d2' [ 0s] [ 0s] processing specfile /srv/build/root_1/.build-srcdir/edje.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_1/.build-srcdir/edje.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_1/.build.rpmlist /srv/build/root_1/.build-srcdir/edje.spec build rpmlint-Factory ... [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils [ 1s] breaking dependency eglibc-common -> coreutils [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc-common -> eglibc [ 1s] cycle: libgcc -> eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: libgcc -> eglibc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: rpm-libs -> rpm [ 1s] breaking dependency rpm -> rpm-libs [ 1s] [1/56] preinstalling libgcc... [ 1s] [2/56] preinstalling setup... [ 1s] [3/56] preinstalling filesystem... [ 1s] [4/56] preinstalling eglibc... [ 1s] [5/56] preinstalling eglibc-common... [ 1s] [6/56] preinstalling bash... [ 2s] [7/56] preinstalling bzip2-libs... [ 2s] [8/56] preinstalling diffutils... [ 2s] [9/56] preinstalling elfutils-libelf... [ 2s] [10/56] preinstalling libattr... [ 2s] [11/56] preinstalling liblua... [ 2s] [12/56] preinstalling libstdc++... [ 2s] [13/56] preinstalling ncurses-libs... [ 2s] [14/56] preinstalling nspr... [ 2s] [15/56] preinstalling nss-softokn-freebl... [ 2s] [16/56] preinstalling popt... [ 2s] [17/56] preinstalling readline... [ 2s] [18/56] preinstalling sed... [ 2s] [19/56] preinstalling sqlite... [ 2s] [20/56] preinstalling xz-libs... [ 2s] [21/56] preinstalling zlib... [ 2s] [22/56] preinstalling qemu.x86_64... [ 2s] [23/56] preinstalling libcap... [ 2s] [24/56] preinstalling libacl... [ 2s] [25/56] preinstalling libfile... [ 2s] [26/56] preinstalling bzip2... [ 2s] [27/56] preinstalling nss... [ 2s] [28/56] preinstalling tar... [ 2s] [29/56] preinstalling coreutils... [ 2s] [30/56] preinstalling file... [ 2s] [31/56] preinstalling rpm... [ 3s] [32/56] preinstalling tizen-accelerator... [ 3s] [33/56] preinstalling rpm-libs... [ 3s] [34/56] preinstalling gmp-x86-arm... [ 3s] [35/56] preinstalling mpc-x86-arm... [ 3s] [36/56] preinstalling mpfr-x86-arm... [ 3s] [37/56] preinstalling bzip2-libs-x86-arm... [ 3s] [38/56] preinstalling eglibc-x86-arm... [ 3s] [39/56] preinstalling elfutils-libelf-x86-arm... [ 3s] [40/56] preinstalling libacl-x86-arm... [ 3s] [41/56] preinstalling libattr-x86-arm... [ 3s] [42/56] preinstalling libcap-x86-arm... [ 3s] [43/56] preinstalling libfile-x86-arm... [ 3s] [44/56] preinstalling libgcc-x86-arm... [ 3s] [45/56] preinstalling liblua-x86-arm... [ 3s] [46/56] preinstalling ncurses-libs-x86-arm... [ 3s] [47/56] preinstalling nspr-x86-arm... [ 3s] [48/56] preinstalling nss-softokn-freebl-x86-arm... [ 3s] [49/56] preinstalling nss-x86-arm... [ 3s] [50/56] preinstalling popt-x86-arm... [ 3s] [51/56] preinstalling rpm-libs-x86-arm... [ 3s] [52/56] preinstalling sqlite-x86-arm... [ 3s] [53/56] preinstalling xz-libs-x86-arm... [ 3s] [54/56] preinstalling zlib-x86-arm... [ 3s] [55/56] preinstalling bash-x86-arm... [ 3s] [56/56] preinstalling rpm-x86-arm... [ 3s] [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl-libs -> perl [ 3s] [1/8] preinstalling e2fsprogs-libs... [ 3s] [2/8] preinstalling libpcre... [ 3s] [3/8] preinstalling libuuid... [ 3s] [4/8] preinstalling grep... [ 3s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 4s] [8/8] preinstalling perl... [ 4s] copying packages... [ 5s] reordering...cycle: bash -> eglibc -> eglibc-common [ 5s] breaking dependency eglibc-common -> bash [ 5s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 5s] breaking dependency eglibc-common -> coreutils [ 5s] cycle: eglibc -> eglibc-common [ 5s] breaking dependency eglibc-common -> eglibc [ 5s] cycle: eglibc -> eglibc-common -> findutils [ 5s] breaking dependency eglibc-common -> findutils [ 5s] cycle: eglibc -> eglibc-common -> grep [ 5s] breaking dependency grep -> eglibc [ 5s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 5s] breaking dependency grep -> libgcc [ 5s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 5s] breaking dependency libpcre -> eglibc [ 5s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 5s] breaking dependency libpcre -> libgcc [ 5s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 5s] breaking dependency libstdc++ -> eglibc [ 5s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 5s] breaking dependency eglibc-common -> grep [ 5s] cycle: eglibc -> eglibc-common -> libgcc [ 5s] breaking dependency eglibc -> eglibc-common [ 5s] cycle: eglibc -> libgcc [ 5s] breaking dependency libgcc -> eglibc [ 5s] cycle: filesystem -> setup [ 5s] breaking dependency setup -> filesystem [ 5s] cycle: ncurses -> ncurses-libs [ 5s] breaking dependency ncurses-libs -> ncurses [ 5s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 5s] breaking dependency ncurses-libs -> ncurses-base [ 5s] cycle: perl -> perl-libs [ 5s] breaking dependency perl -> perl-libs [ 5s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 5s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 5s] cycle: perl -> perl-IO-Compress-Zlib [ 5s] breaking dependency perl -> perl-IO-Compress-Zlib [ 5s] cycle: perl -> perl-IO-Compress-Base [ 5s] breaking dependency perl -> perl-IO-Compress-Base [ 5s] cycle: perl -> perl-Module-Pluggable [ 5s] breaking dependency perl -> perl-Module-Pluggable [ 5s] cycle: perl -> perl-Pod-Simple [ 5s] breaking dependency perl -> perl-Pod-Simple [ 5s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 5s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 5s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 5s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 5s] cycle: dbus-libs -> dbus [ 5s] breaking dependency dbus -> dbus-libs [ 5s] cycle: libudev -> udev -> systemd [ 5s] breaking dependency systemd -> libudev [ 5s] cycle: nss -> nss-sysinit [ 5s] breaking dependency nss -> nss-sysinit [ 5s] cycle: perl-CPAN -> perl-Test-Harness [ 5s] breaking dependency perl-Test-Harness -> perl-CPAN [ 5s] cycle: pulseaudio-libs -> pulseaudio [ 5s] breaking dependency pulseaudio -> pulseaudio-libs [ 5s] cycle: rpm-libs -> rpm [ 5s] breaking dependency rpm -> rpm-libs [ 5s] cycle: libremix -> libremix-devel [ 5s] breaking dependency libremix-devel -> libremix [ 5s] done [ 26s] booting kvm ... [ 26s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8192 -drive file=/srv/build/root_1/root,if=virtio,cache=none -drive file=/srv/build/root_1/root,if=ide,index=0,cache=none -drive file=/srv/build/root_1/swap,if=virtio,cache=none -smp 4 [ 28s] [ 0.000000] tsc: Fast TSC calibration failed [ 29s] doing fast boot [ 29s] Creating device nodes with udev [ 33s] Waiting for device /dev/vda to appear: ok [ 33s] fsck from util-linux 2.21.2 [ 33s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 33s] /dev/vda: clean, 6996/2097152 files, 246256/8388608 blocks [ 33s] fsck succeeded. Mounting root device read-write. [ 33s] Mounting root /dev/vda [ 33s] mount -o rw -t ext4 /dev/vda /root [ 38s] replacing /etc/mtab with symlink to /proc/self/mounts [ 38s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 44s] 2nd stage started in virtual machine [ 44s] machine type: armv7l [ 44s] switching personality to 8... [ 45s] 2nd stage started in virtual machine [ 45s] machine type: armv7l [ 45s] swapon on /dev/vdb [ 46s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 46s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 47s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 47s] logging output to //.build.log... [ 48s] processing specfile /.build-srcdir/edje.spec ... [ 48s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/edje.spec build rpmlint-Factory ... [ 53s] running rpm-x86-arm postinstall script [ 54s] /bin/rpm [ 54s] /usr/bin/rpm2cpio [ 54s] /usr/bin/rpmdb [ 54s] /usr/bin/rpmquery [ 54s] /usr/bin/rpmsign [ 54s] /usr/bin/rpmverify [ 54s] running rpm-libs-x86-arm postinstall script [ 54s] running tizen-accelerator postinstall script [ 54s] running bash-x86-arm postinstall script [ 54s] initializing rpm db... [ 60s] [1/232] installing kernel-headers-3.0.15-1.10 [ 60s] [2/232] installing libX11-common-1.5.0-3.4 [ 60s] [3/232] installing opengl-es-virtual-drv-0.1.5-11.2 [ 60s] [4/232] installing tizen-release-2.2.0-1.9 [ 60s] [5/232] installing tzdata-2011h-1.10 [ 60s] [6/232] installing libgcc-4.5.3-2.33 [ 61s] [7/232] installing setup-0.1-2.6 [ 61s] [8/232] installing filesystem-0.1-1.9 [ 63s] warning: group lock does not exist - using root [ 63s] warning: group mail does not exist - using root [ 63s] [9/232] installing eglibc-2.13-2.18 [ 65s] [10/232] installing libstdc++-4.5.3-2.33 [ 65s] [11/232] installing eglibc-common-2.13-2.18 [ 70s] /var/tmp/rpm-tmp.e0tC13: line 2: /usr/bin/xargs: No such file or directory [ 70s] [12/232] installing libstdc++-devel-4.5.3-2.33 [ 70s] [13/232] installing bash-4.1-4.9 [ 70s] [14/232] installing bzip2-libs-1.0.5-5.12 [ 70s] [15/232] installing c-ares-1.7.4-3.22 [ 70s] [16/232] installing cpio-2.8-4.8 [ 70s] [17/232] installing diffutils-3.0-4.8 [ 70s] [18/232] installing e2fsprogs-libs-1.41.9-3.8 [ 71s] [19/232] installing elfutils-libelf-0.152-2.16 [ 71s] [20/232] installing expat-2.0.1-8.12 [ 71s] [21/232] installing fdupes-1.40-42.10 [ 71s] [22/232] installing findutils-4.2.31-2.8 [ 71s] [23/232] installing fribidi-0.19.5-5.10 [ 71s] [24/232] installing gdbm-1.8.3-2.33 [ 71s] [25/232] installing kmod-5-5.1 [ 71s] [26/232] installing libICE-1.0.8-1.8 [ 71s] [27/232] installing libXau-1.0.7-1.8 [ 72s] [28/232] installing libasound-1.0.24.1-4.2 [ 72s] [29/232] installing libattr-2.4.44-8.12 [ 72s] [30/232] installing libffi-3.0.9-101.1 [ 72s] [31/232] installing libflac-1.2.1+slp2+build03-1.8 [ 72s] [32/232] installing libgomp-4.5.3-2.33 [ 72s] [33/232] installing libidn-1.15-7.29 [ 72s] [34/232] installing libjpeg-turbo-1.2.0-8.10 [ 72s] [35/232] installing liblua-5.1.4-7.7 [ 72s] [36/232] installing libtool-ltdl-2.2.6b-2.15 [ 72s] [37/232] installing libunwind-1.1-4.2 [ 72s] [38/232] installing libuuid-2.20.2-7.7 [ 73s] [39/232] installing lzo-2.03-2.18 [ 73s] [40/232] installing m4-1.4.14-1.9 [ 73s] [41/232] installing make-3.81-1.12 [ 73s] [42/232] installing net-tools-1.60-88.9 [ 73s] [43/232] installing nspr-4.8.7-1.17 [ 73s] [44/232] installing nss-softokn-freebl-3.12.9-3.28 [ 73s] [45/232] installing patch-2.6.1.169-1.9 [ 73s] [46/232] installing pixman-0.28.2-1.8 [ 73s] [47/232] installing pkgconfig-0.25-3.11 [ 74s] [48/232] installing popt-1.16-4.11 [ 74s] [49/232] installing readline-5.2-14.7 [ 74s] [50/232] installing sed-4.1.5-3.8 [ 74s] [51/232] installing smack-1.0slp2+s12-1.11 [ 74s] [52/232] installing speex-1.2rc1-4.2 [ 74s] [53/232] installing sqlite-3.7.13-1.12 [ 75s] [54/232] installing xz-libs-5.0.3-2.17 [ 75s] [55/232] installing zlib-1.2.5-3.18 [ 75s] [56/232] installing gmp-5.0.1-2.16 [ 75s] [57/232] installing libpcre-7.7-4.44 [ 76s] [58/232] installing ncurses-libs-5.7-4.11 [ 76s] [59/232] installing build-compare-2009.10.14-26.14 [ 76s] [60/232] installing qemu.x86_64-1.2-2.10 [ 79s] [61/232] installing eglibc-headers-2.13-2.18 [ 79s] [62/232] installing fribidi-devel-0.19.5-5.10 [ 80s] [63/232] installing libcap-2.21-2.10 [ 80s] [64/232] installing liblua-devel-5.1.4-7.7 [ 80s] [65/232] installing libpci3-3.0.0-2.2 [ 80s] [66/232] installing pixman-devel-0.28.2-1.8 [ 80s] [67/232] installing unzip-6.0-10.16 [ 80s] [68/232] installing zlib-devel-1.2.5-3.18 [ 80s] [69/232] installing freetype-2.4.9-4.10 [ 81s] [70/232] installing grep-2.5.1a-63.9 [ 81s] [71/232] installing libacl-2.2.49-3.12 [ 81s] [72/232] installing libfile-5.04-2.11 [ 81s] [73/232] installing libpng-1.2.50-1.10 [ 81s] [74/232] installing libsndfile-1.0.25-2.2 [ 81s] [75/232] installing libxcb-1.8.1-1.7 [ 81s] [76/232] installing lzo-minilzo-2.03-2.18 [ 81s] [77/232] installing mpfr-3.0.0-1.16 [ 82s] [78/232] installing ncurses-5.7-4.11 [ 82s] [79/232] installing binutils-2.22-1.12 [ 82s] [80/232] installing bzip2-1.0.5-5.12 [ 82s] [81/232] installing glib2-2.32.3-6.3 [ 83s] [82/232] installing libSM-1.2.1-1.8 [ 83s] [83/232] installing libblkid-2.20.2-7.7 [ 83s] [84/232] installing libicu-4.8-2.2 [ 84s] [85/232] installing smack-utils-1.0slp2+s12-1.11 [ 84s] [86/232] installing xz-5.0.3-2.17 [ 84s] [87/232] installing elfutils-libs-0.152-2.16 [ 84s] [88/232] installing libflac-devel-1.2.1+slp2+build03-1.8 [ 84s] [89/232] installing nss-3.12.9-3.28 [ 84s] [90/232] installing perl-5.12.1-62.8 [ 86s] [91/232] installing ncurses-base-5.7-4.11 [ 86s] [92/232] installing perl-HTML-Tagset-3.20-8.3 [ 86s] [93/232] installing perl-IO-Compress-Base-2.008-62.8 [ 86s] [94/232] installing perl-Module-Pluggable-3.60-62.8 [ 86s] [95/232] installing perl-Pod-Escapes-1.04-62.8 [ 86s] [96/232] installing perl-TimeDate-1.20-1.3 [ 86s] [97/232] installing eglibc-devel-2.13-2.18 [ 86s] [98/232] installing libsndfile-devel-1.0.25-2.2 [ 86s] [99/232] installing lzo-devel-2.03-2.18 [ 87s] [100/232] installing pciutils-3.0.0-2.2 [ 87s] [101/232] installing perl-Compress-Raw-Zlib-2.008-62.8 [ 87s] [102/232] installing perl-devel-5.12.1-62.8 [ 87s] [103/232] installing perl-libs-5.12.1-62.8 [ 87s] [104/232] installing tar-1.17-5.11 [ 87s] [105/232] installing coreutils-6.9-9.12 [ 87s] [106/232] installing file-5.04-2.11 [ 88s] [107/232] installing freetype-devel-2.4.9-4.10 [ 88s] [108/232] installing libX11-1.5.0-3.4 [ 88s] [109/232] installing libdlog-0.4.1-17.4 [ 88s] chown: `root:app_logging': invalid user [ 88s] [110/232] installing libmount-2.20.2-7.7 [ 88s] [111/232] installing mpc-0.9-1.16 [ 88s] [112/232] installing openssl-1.0.1c-2.26 [ 88s] [113/232] installing xz-lzma-compat-5.0.3-2.17 [ 88s] [114/232] installing elfutils-0.152-2.16 [ 89s] [115/232] installing nss-sysinit-3.12.9-3.28 [ 89s] [116/232] installing libdlog-devel-0.4.1-17.4 [ 89s] [117/232] installing perl-ExtUtils-ParseXS-2.18-62.8 [ 89s] [118/232] installing perl-Pod-Simple-3.07-62.8 [ 89s] [119/232] installing perl-Test-Simple-0.80-62.8 [ 89s] [120/232] installing tizen-accelerator-1.0.1-1.14 [ 89s] [121/232] installing eina-1.7.1+svn.77445+build06r01-1.4 [ 89s] [122/232] installing libXcomposite-0.4.3-3.3 [ 90s] [123/232] installing libXext-1.3.1-1.3 [ 90s] [124/232] installing libXfixes-5.0-2.3 [ 90s] [125/232] installing libXrender-0.9.7-1.3 [ 90s] [126/232] installing libidn-devel-1.15-7.29 [ 90s] [127/232] installing perl-IO-Compress-Zlib-2.008-62.8 [ 90s] [128/232] installing perl-Test-Harness-3.12-62.8 [ 90s] [129/232] installing gawk-3.1.5-2.9 [ 91s] [130/232] installing gzip-1.3.14-3.8 [ 91s] [131/232] installing pam-1.1.5-3.6 [ 91s] [132/232] installing build-2011.01.10a-1.9 [ 91s] [133/232] installing giflib-4.1.6-13.4 [ 91s] [134/232] installing libcurl-7.28.1-3.26 [ 92s] [135/232] installing libremix-devel-0.2.4+slp2+build09r01-1.8 [ 92s] [136/232] installing sys-assert-0.3.3-5.4 [ 92s] chown: `root:crash': invalid user [ 92s] chown: `root:crash': invalid user [ 92s] [137/232] installing cpp-4.5.3-2.33 [ 92s] [138/232] installing dbus-1.6.4-7.1 [ 92s] warning: group dbus does not exist - using root [ 92s] [139/232] installing util-linux-2.20.2-7.7 [ 92s] warning: group tty does not exist - using root [ 92s] /bin/chown: `root:root': invalid user [ 92s] [140/232] installing fontconfig-2.9.0-3.1 [ 95s] [141/232] installing glib2-devel-2.32.3-6.3 [ 95s] [142/232] installing bzip2-libs-x86-arm-1.0.5-9.7 [ 95s] [143/232] installing dbus-libs-1.6.4-7.1 [ 95s] [144/232] installing eglibc-x86-arm-2.13-9.7 [ 96s] [145/232] installing eina-devel-1.7.1+svn.77445+build06r01-1.4 [ 96s] [146/232] installing elfutils-libelf-x86-arm-0.152-9.7 [ 96s] [147/232] installing elfutils-libs-x86-arm-0.152-9.7 [ 96s] [148/232] installing embryo-1.7.1+svn.76491slp2+build01-1.5 [ 96s] [149/232] installing fontconfig-devel-2.9.0-3.1 [ 97s] [150/232] installing gmp-x86-arm-5.0.1-9.7 [ 97s] [151/232] installing libacl-x86-arm-2.2.49-9.7 [ 97s] [152/232] installing libattr-x86-arm-2.4.44-9.7 [ 97s] [153/232] installing libcap-x86-arm-2.21-9.6 [ 97s] [154/232] installing libfile-x86-arm-5.04-9.7 [ 97s] [155/232] installing libgcc-x86-arm-4.5.3-9.7 [ 98s] [156/232] installing liblua-x86-arm-5.1.4-9.7 [ 98s] [157/232] installing mpc-x86-arm-0.9-9.7 [ 98s] [158/232] installing mpfr-x86-arm-3.0.0-9.7 [ 98s] [159/232] installing ncurses-libs-x86-arm-5.7-9.6 [ 98s] [160/232] installing nspr-x86-arm-4.8.7-9.7 [ 98s] [161/232] installing nss-softokn-freebl-x86-arm-3.12.9-9.7 [ 99s] [162/232] installing nss-x86-arm-3.12.9-9.7 [ 99s] [163/232] installing perl-ExtUtils-MakeMaker-6.36-62.8 [ 99s] [164/232] installing popt-x86-arm-1.16-9.7 [ 99s] [165/232] installing sqlite-x86-arm-3.7.13-9.6 [ 99s] [166/232] installing xz-libs-x86-arm-5.0.3-9.7 [ 99s] [167/232] installing zlib-x86-arm-1.2.5-7.6 [ 100s] [168/232] installing ecore-1.7.1+svn.77580+build25r05-2.4 [ 100s] [169/232] installing libXdamage-1.1.3-3.3 [ 100s] [170/232] installing libXgesture-0.1.1-3.3 [ 100s] [171/232] installing libXi-1.6.1-1.3 [ 100s] [172/232] installing libXinerama-1.1.2-1.3 [ 100s] [173/232] installing libcurl-devel-7.28.1-3.26 [ 100s] [174/232] installing libremix-0.2.4+slp2+build09r01-1.8 [ 101s] [175/232] installing eet-1.7.1+svn.77495slp2+build01-1.5 [ 101s] [176/232] installing libXcursor-1.1.13-1.3 [ 101s] [177/232] installing libXrandr-1.4.0-3.3 [ 101s] [178/232] installing curl-7.28.1-3.26 [ 101s] [179/232] installing cairo-1.12.12-12.1 [ 101s] [180/232] installing gcc-4.5.3-2.33 [ 102s] [181/232] installing embryo-devel-1.7.1+svn.76491slp2+build01-1.5 [ 102s] [182/232] installing perl-CPAN-1.9205-62.8 [ 102s] [183/232] installing bash-x86-arm-4.1-7.7 [ 102s] [184/232] installing eet-devel-1.7.1+svn.77495slp2+build01-1.5 [ 102s] [185/232] installing fdupes-x86-arm-1.40-9.7 [ 102s] [186/232] installing findutils-x86-arm-4.2.31-7.7 [ 102s] [187/232] installing gawk-x86-arm-3.1.5-7.7 [ 103s] [188/232] installing gzip-x86-arm-1.3.14-9.7 [ 103s] [189/232] installing make-x86-arm-3.81-8.6 [ 103s] [190/232] installing patch-x86-arm-2.6.1.169-7.7 [ 103s] [191/232] installing sed-x86-arm-4.1.5-9.7 [ 103s] /bin/sed.orig-arm already present - skipping. [ 103s] [192/232] installing diffutils-x86-arm-3.0-9.7 [ 103s] /usr/bin/cmp.orig-arm already present - skipping. [ 103s] /usr/bin/diff.orig-arm already present - skipping. [ 103s] /usr/bin/diff3.orig-arm already present - skipping. [ 103s] /usr/bin/sdiff.orig-arm already present - skipping. [ 103s] [193/232] installing ecore-imf-1.7.1+svn.77580+build25r05-2.4 [ 104s] [194/232] installing ecore-input-1.7.1+svn.77580+build25r05-2.4 [ 104s] [195/232] installing libXtst-1.2.0-3.3 [ 104s] [196/232] installing autoconf-2.68-1.9 [ 104s] [197/232] installing coreutils-x86-arm-6.9-7.7 [ 106s] [198/232] installing file-x86-arm-5.04-7.7 [ 106s] [199/232] installing tar-x86-arm-1.17-9.6 [ 106s] /bin/tar.orig-arm already present - skipping. [ 106s] [200/232] installing ecore-con-1.7.1+svn.77580+build25r05-2.4 [ 106s] [201/232] installing harfbuzz-0.9.7-1.5 [ 106s] [202/232] installing bluez-4.101_23-25.2 [ 106s] [203/232] installing elfutils-x86-arm-0.152-7.8 [ 107s] [204/232] installing systemd-43-3.3 [ 107s] [205/232] installing gcc-c++-4.5.3-2.33 [ 107s] [206/232] installing rpm-4.9.1-4.12 [ 107s] [207/232] installing harfbuzz-devel-0.9.7-1.5 [ 107s] [208/232] installing automake-1.11.1-3.12 [ 108s] [209/232] installing ecore-fb-1.7.1+svn.77580+build25r05-2.4 [ 108s] [210/232] installing vconf-0.2.51-1.4 [ 108s] Failed to get D-Bus connection: No connection to service manager. [ 108s] warning: %post(vconf-0.2.51-1.4.armv7l) scriptlet failed, exit status 1 [ 108s] [211/232] installing ecore-file-1.7.1+svn.77580+build25r05-2.4 [ 108s] [212/232] installing ecore-ipc-1.7.1+svn.77580+build25r05-2.4 [ 108s] [213/232] installing udev-182-7.4 [ 108s] Failed to get D-Bus connection: No connection to service manager. [ 108s] Failed to get D-Bus connection: No connection to service manager. [ 108s] Failed to get D-Bus connection: No connection to service manager. [ 108s] Failed to get D-Bus connection: No connection to service manager. [ 108s] [214/232] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.2 [ 109s] "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " [ 109s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 109s] cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory [ 109s] cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [ 109s] [215/232] installing rpm-libs-4.9.1-4.12 [ 109s] [216/232] installing evas-1.7.1+svn.77561+build32r02-1.4 [ 109s] [217/232] installing ecore-x-1.7.1+svn.77580+build25r05-2.4 [ 109s] [218/232] installing libudev-182-7.4 [ 110s] [219/232] installing rpm-libs-x86-arm-4.9.1-10.7 [ 110s] [220/232] installing libtool-2.2.6b-2.15 [ 110s] [221/232] installing cross-armv7l-binutils-accel-armv7l-2.22-1.6 [ 110s] mv: cannot stat `/usr/bin/gprov': No such file or directory [ 110s] [222/232] installing ecore-imf-evas-1.7.1+svn.77580+build25r05-2.4 [ 110s] [223/232] installing ecore-input-evas-1.7.1+svn.77580+build25r05-2.4 [ 110s] [224/232] installing evas-devel-1.7.1+svn.77561+build32r02-1.4 [ 111s] [225/232] installing rpm-build-4.9.1-4.12 [ 111s] [226/232] installing rpm-x86-arm-4.9.1-9.7 [ 111s] /bin/rpm.orig-arm already present - skipping. [ 111s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 111s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 111s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 111s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 111s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 111s] [227/232] installing pulseaudio-0.9.23-35.3 [ 111s] Failed to get D-Bus connection: No connection to service manager. [ 111s] Failed to get D-Bus connection: No connection to service manager. [ 111s] warning: %post(pulseaudio-0.9.23-35.3.armv7l) scriptlet failed, exit status 1 [ 111s] [228/232] installing rpm-build-x86-arm-4.9.1-9.7 [ 111s] /usr/bin/rpmbuild [ 111s] /usr/lib/rpm/debugedit [ 111s] [229/232] installing ecore-evas-1.7.1+svn.77580+build25r05-2.4 [ 111s] [230/232] installing pulseaudio-libs-0.9.23-35.3 [ 111s] [231/232] installing ecore-devel-1.7.1+svn.77580+build25r05-2.4 [ 111s] [232/232] installing pulseaudio-libs-devel-0.9.23-35.3 [ 111s] now finalizing build dir... [ 112s] /.build/build: line 2680: //etc/passwd: No such file or directory [ 114s] build target is armv7l-tizen-linux [ 114s] ----------------------------------------------------------------- [ 114s] I have the following modifications for edje.spec: [ 114s] 5c5 [ 114s] < Release: 1 [ 114s] --- [ 114s] > Release: 2.7 [ 114s] ----------------------------------------------------------------- [ 114s] ----- building edje.spec (user abuild) [ 114s] ----------------------------------------------------------------- [ 114s] ----------------------------------------------------------------- [ 114s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.2:Main/standard/6c55d6589bc50beb55f6a1f0483011d2-edje' /home/abuild/rpmbuild/SOURCES/edje.spec [ 115s] Building target platforms: armv7l-tizen-linux [ 115s] Building for target armv7l-tizen-linux [ 115s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.8lYZDI [ 115s] + umask 022 [ 115s] + cd /home/abuild/rpmbuild/BUILD [ 115s] + LANG=C [ 115s] + export LANG [ 115s] + unset DISPLAY [ 115s] + cd /home/abuild/rpmbuild/BUILD [ 115s] + rm -rf edje-1.7.1+svn.77330+build57 [ 115s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/edje-1.7.1+svn.77330+build57.tar.gz [ 115s] + /bin/tar -xf - [ 115s] + STATUS=0 [ 115s] + '[' 0 -ne 0 ']' [ 115s] + cd edje-1.7.1+svn.77330+build57 [ 115s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 115s] + exit 0 [ 115s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.JDYyC6 [ 115s] + umask 022 [ 115s] + cd /home/abuild/rpmbuild/BUILD [ 115s] + cd edje-1.7.1+svn.77330+build57 [ 115s] + LANG=C [ 115s] + export LANG [ 115s] + unset DISPLAY [ 115s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 115s] + export CFLAGS [ 115s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 115s] + export CXXFLAGS [ 115s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 115s] + export FFLAGS [ 115s] + LD_AS_NEEDED=1 [ 115s] + export LD_AS_NEEDED [ 115s] + export 'CFLAGS+= -fvisibility=hidden -ffast-math -fPIC' [ 115s] + CFLAGS+=' -fvisibility=hidden -ffast-math -fPIC' [ 115s] + export 'LDFLAGS+= -fvisibility=hidden -Wl,--hash-style=both -Wl,--as-needed' [ 115s] + LDFLAGS+=' -fvisibility=hidden -Wl,--hash-style=both -Wl,--as-needed' [ 115s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -fvisibility=hidden -ffast-math -fPIC' [ 115s] + export CFLAGS [ 115s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 115s] + export CXXFLAGS [ 115s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 115s] + export FFLAGS [ 115s] + ./autogen.sh --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static [ 115s] Running aclocal... [ 126s] sh: svnversion: command not found [ 133s] Running autoheader... [ 135s] sh: svnversion: command not found [ 141s] Running autoconf... [ 148s] Running libtoolize... [ 149s] Running automake... [ 153s] configure.ac:567: installing `./compile' [ 153s] configure.ac:38: installing `./config.guess' [ 153s] configure.ac:38: installing `./config.sub' [ 153s] configure.ac:35: installing `./install-sh' [ 153s] configure.ac:35: installing `./missing' [ 154s] doc/Makefile.am:34: wildcard img/*.*: non-POSIX variable name [ 154s] doc/Makefile.am:34: (probably a GNU make extension) [ 154s] doc/Makefile.am:34: wildcard examples/*.*: non-POSIX variable name [ 154s] doc/Makefile.am:34: (probably a GNU make extension) [ 156s] src/bin/Makefile.am: installing `./depcomp' [ 167s] cmp: config.cache-env: No such file or directory [ 167s] Cleaning configure cache... [ 167s] configure: creating cache config.cache [ 167s] checking for a BSD-compatible install... /usr/bin/install -c [ 168s] checking whether build environment is sane... yes [ 168s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 168s] checking for gawk... gawk [ 168s] checking whether make sets $(MAKE)... yes [ 168s] checking build system type... armv7l-unknown-linux-gnueabi [ 168s] checking host system type... armv7l-unknown-linux-gnueabi [ 168s] checking for style of include used by make... GNU [ 168s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 168s] checking for gcc... gcc [ 168s] checking whether the C compiler works... yes [ 168s] checking for C compiler default output file name... a.out [ 168s] checking for suffix of executables... [ 168s] checking whether we are cross compiling... no [ 168s] checking for suffix of object files... o [ 168s] checking whether we are using the GNU C compiler... yes [ 168s] checking whether gcc accepts -g... yes [ 168s] checking for gcc option to accept ISO C89... none needed [ 168s] checking dependency style of gcc... gcc3 [ 168s] checking for a sed that does not truncate output... /bin/sed [ 168s] checking for grep that handles long lines and -e... /bin/grep [ 168s] checking for egrep... /bin/grep -E [ 168s] checking for fgrep... /bin/grep -F [ 168s] checking for ld used by gcc... /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld [ 168s] checking if the linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) is GNU ld... yes [ 168s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 168s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 168s] checking whether ln -s works... yes [ 168s] checking the maximum length of command line arguments... 1572864 [ 168s] checking whether the shell understands some XSI constructs... yes [ 168s] checking whether the shell understands "+="... yes [ 168s] checking for /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld option to reload object files... -r [ 168s] checking for armv7l-unknown-linux-gnueabi-objdump... objdump [ 168s] checking how to recognize dependent libraries... pass_all [ 168s] checking for armv7l-unknown-linux-gnueabi-ar... no [ 168s] checking for ar... ar [ 168s] checking for armv7l-unknown-linux-gnueabi-strip... no [ 168s] checking for strip... strip [ 168s] checking for armv7l-unknown-linux-gnueabi-ranlib... no [ 168s] checking for ranlib... ranlib [ 169s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 169s] checking how to run the C preprocessor... gcc -E [ 169s] checking for ANSI C header files... yes [ 169s] checking for sys/types.h... yes [ 169s] checking for sys/stat.h... yes [ 169s] checking for stdlib.h... yes [ 169s] checking for string.h... yes [ 169s] checking for memory.h... yes [ 169s] checking for strings.h... yes [ 169s] checking for inttypes.h... yes [ 169s] checking for stdint.h... yes [ 169s] checking for unistd.h... yes [ 169s] checking for dlfcn.h... yes [ 169s] checking for objdir... .libs [ 169s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 169s] checking for gcc option to produce PIC... -fPIC -DPIC [ 169s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 169s] checking if gcc static flag -static works... no [ 169s] checking if gcc supports -c -o file.o... yes [ 169s] checking if gcc supports -c -o file.o... (cached) yes [ 169s] checking whether the gcc linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) supports shared libraries... yes [ 169s] checking whether -lc should be explicitly linked in... no [ 169s] checking dynamic linker characteristics... GNU/Linux ld.so [ 169s] checking how to hardcode library paths into programs... immediate [ 169s] checking whether stripping libraries is possible... yes [ 169s] checking if libtool supports shared libraries... yes [ 169s] checking whether to build shared libraries... yes [ 169s] checking whether to build static libraries... no [ 169s] configure: edje_cc set to /bin/edje_cc [ 169s] configure: edje_codegen set to /bin/edje_codegen [ 169s] checking whether to build edje_cc binary... yes [ 169s] checking whether to build edje_decc binary... yes [ 169s] checking whether to build edje_recc binary... yes [ 169s] checking whether to build edje_player binary... yes [ 169s] checking whether to build edje_inspector binary... yes [ 169s] checking whether to build edje_external_inspector binary... yes [ 169s] checking whether to build edje_watch binary... yes [ 169s] checking whether to build edje_codegen binary... yes [ 169s] checking for location of Vim data files... Not found, EDC syntax file will not be installed [ 169s] checking for armv7l-unknown-linux-gnueabi-gcc... gcc [ 169s] checking whether we are using the GNU C compiler... (cached) yes [ 169s] checking whether gcc accepts -g... (cached) yes [ 169s] checking for gcc option to accept ISO C89... (cached) none needed [ 169s] checking dependency style of gcc... (cached) gcc3 [ 169s] checking whether to build documentation... yes [ 169s] checking for doxygen... no [ 169s] WARNING: [ 169s] The doxygen program was not found in your execute path. [ 169s] You may have doxygen installed somewhere not covered by your path. [ 169s] [ 169s] If this is the case make sure you have the packages installed, AND [ 169s] that the doxygen program is in your execute path (see your [ 169s] shell manual page on setting the $PATH environment variable), OR [ 169s] alternatively, specify the program to use with --with-doxygen. [ 169s] configure: WARNING: no doxygen detected. Documentation will not be built [ 169s] checking for a Python interpreter with version >= 2.5... none [ 169s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 169s] checking for pkg-config... /usr/bin/pkg-config [ 169s] checking pkg-config is at least version 0.9.0... yes [ 169s] checking for LUA... yes [ 170s] checking for MINIMAL... yes [ 170s] checking for EDJE... yes [ 170s] checking for ECORE_IMF... yes [ 170s] checking for EIO... no [ 170s] checking for SNDFILE... yes [ 170s] checking for REMIX... yes [ 170s] checking for VORBISENC... no [ 170s] checking for ALSA... no [ 170s] checking for PA... yes [ 170s] checking for FLAC... yes [ 171s] checking for EDJE_CC... yes [ 171s] checking for EDJE_DECC... yes [ 171s] checking for EDJE_PLAYER... yes [ 171s] checking for EDJE_INSPECTOR... yes [ 171s] checking for EDJE_EXTERNAL_INSPECTOR... yes [ 171s] checking for EDJE_WATCH... no [ 171s] checking for EDJE_CODEGEN... yes [ 171s] checking locale.h usability... yes [ 171s] checking locale.h presence... yes [ 171s] checking for locale.h... yes [ 171s] checking sys/resource.h usability... yes [ 171s] checking sys/resource.h presence... yes [ 171s] checking for sys/resource.h... yes [ 171s] checking for PATH_MAX in limits.h... yes [ 171s] checking whether gcc and cc understand -c and -o together... yes [ 171s] checking for an ANSI C-conforming const... yes [ 171s] checking for gcc option to accept ISO C99... -std=gnu99 [ 171s] checking for gcc -std=gnu99 option to accept ISO Standard C... (cached) -std=gnu99 [ 171s] checking for ANSI C header files... (cached) yes [ 171s] checking for __attribute__... yes [ 172s] checking for library containing strerror... none required [ 172s] checking for size_t... yes [ 172s] checking for working alloca.h... yes [ 172s] checking for alloca... yes [ 172s] checking for realpath... yes [ 172s] checking whether tests are built... no [ 172s] checking whether to use profiling instrumentation... no [ 172s] configure: updating cache config.cache [ 172s] configure: creating ./config.status [ 172s] config.status: creating edje.pc [ 172s] config.status: creating edje.spec [ 172s] config.status: creating Makefile [ 172s] config.status: creating data/Makefile [ 172s] config.status: creating data/include/Makefile [ 172s] config.status: creating doc/Makefile [ 172s] config.status: creating doc/Doxyfile [ 172s] config.status: creating src/Makefile [ 172s] config.status: creating src/lib/Makefile [ 172s] config.status: creating src/bin/Makefile [ 172s] config.status: creating src/bin/epp/Makefile [ 172s] config.status: creating src/modules/Makefile [ 172s] config.status: creating src/modules/alsa_snd_player/Makefile [ 172s] config.status: creating src/modules/pa_snd_player/Makefile [ 172s] config.status: creating src/modules/eet_snd_reader/Makefile [ 172s] config.status: creating src/modules/multisense_factory/Makefile [ 172s] config.status: creating src/tests/Makefile [ 172s] config.status: creating utils/Makefile [ 172s] config.status: creating src/examples/Makefile [ 172s] config.status: creating config.h [ 172s] config.status: executing depfiles commands [ 173s] config.status: executing libtool commands [ 173s] [ 173s] [ 173s] [ 173s] ------------------------------------------------------------------------ [ 173s] edje 1.7.99.0 [ 173s] ------------------------------------------------------------------------ [ 173s] [ 173s] Configuration Options Summary: [ 173s] [ 173s] Amalgamation.........: no [ 173s] Ecore IMF............: yes [ 173s] EIO..................: no [ 173s] LibRemix.............: yes [ 173s] Libsndfile...........: yes [ 173s] Ogg/Vorbis...........: no [ 173s] LibFLAC..............: yes [ 173s] LibALSA..............: no [ 173s] LibPA................: yes [ 173s] EDJE_PROGRAM_CACHE...: no [ 173s] EDJE_CALC_CACHE......: yes [ 173s] Fixed point..........: no [ 173s] Documentation........: no [ 173s] Tests................: no [ 173s] Coverage.............: no [ 173s] Examples.............: install: build:no [ 173s] [ 173s] Programs: [ 173s] [ 173s] Build edje_cc................: yes [ 173s] Build edje_decc..............: yes [ 173s] Build edje_recc..............: yes [ 173s] Build edje_player............: yes [ 173s] Build edje_inspector.........: yes [ 173s] Build edje_external_inspector: yes [ 173s] Build edje_watch.............: no [ 173s] Build edje_codegen...........: yes [ 173s] [ 173s] Compilation............: make (or gmake) [ 173s] CPPFLAGS.............: [ 173s] CFLAGS...............: -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -fvisibility=hidden -ffast-math -fPIC [ 173s] LDFLAGS..............: -fvisibility=hidden -Wl,--hash-style=both -Wl,--as-needed [ 173s] [ 173s] Installation...........: make install (as root if needed, with 'su' or 'sudo') [ 173s] prefix...............: /usr [ 173s] [ 173s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -fvisibility=hidden -ffast-math -fPIC' [ 173s] + export CFLAGS [ 173s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 173s] + export CXXFLAGS [ 173s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 173s] + export FFLAGS [ 173s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static [ 173s] checking for a BSD-compatible install... /usr/bin/install -c [ 174s] checking whether build environment is sane... yes [ 174s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 174s] checking for gawk... gawk [ 174s] checking whether make sets $(MAKE)... yes [ 174s] checking build system type... armv7l-unknown-linux-gnueabi [ 174s] checking host system type... armv7l-unknown-linux-gnueabi [ 174s] checking for style of include used by make... GNU [ 174s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 174s] checking for gcc... gcc [ 174s] checking whether the C compiler works... yes [ 174s] checking for C compiler default output file name... a.out [ 174s] checking for suffix of executables... [ 174s] checking whether we are cross compiling... no [ 174s] checking for suffix of object files... o [ 174s] checking whether we are using the GNU C compiler... yes [ 174s] checking whether gcc accepts -g... yes [ 174s] checking for gcc option to accept ISO C89... none needed [ 174s] checking dependency style of gcc... gcc3 [ 174s] checking for a sed that does not truncate output... /bin/sed [ 174s] checking for grep that handles long lines and -e... /bin/grep [ 174s] checking for egrep... /bin/grep -E [ 174s] checking for fgrep... /bin/grep -F [ 174s] checking for ld used by gcc... /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld [ 174s] checking if the linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) is GNU ld... yes [ 174s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 174s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 174s] checking whether ln -s works... yes [ 174s] checking the maximum length of command line arguments... 1572864 [ 174s] checking whether the shell understands some XSI constructs... yes [ 174s] checking whether the shell understands "+="... yes [ 174s] checking for /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld option to reload object files... -r [ 174s] checking for armv7l-unknown-linux-gnueabi-objdump... objdump [ 174s] checking how to recognize dependent libraries... pass_all [ 174s] checking for armv7l-unknown-linux-gnueabi-ar... no [ 174s] checking for ar... ar [ 174s] checking for armv7l-unknown-linux-gnueabi-strip... no [ 174s] checking for strip... strip [ 174s] checking for armv7l-unknown-linux-gnueabi-ranlib... no [ 174s] checking for ranlib... ranlib [ 175s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 175s] checking how to run the C preprocessor... gcc -E [ 175s] checking for ANSI C header files... yes [ 175s] checking for sys/types.h... yes [ 175s] checking for sys/stat.h... yes [ 175s] checking for stdlib.h... yes [ 175s] checking for string.h... yes [ 175s] checking for memory.h... yes [ 175s] checking for strings.h... yes [ 175s] checking for inttypes.h... yes [ 175s] checking for stdint.h... yes [ 175s] checking for unistd.h... yes [ 175s] checking for dlfcn.h... yes [ 175s] checking for objdir... .libs [ 175s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 175s] checking for gcc option to produce PIC... -fPIC -DPIC [ 175s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 175s] checking if gcc static flag -static works... no [ 175s] checking if gcc supports -c -o file.o... yes [ 175s] checking if gcc supports -c -o file.o... (cached) yes [ 175s] checking whether the gcc linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) supports shared libraries... yes [ 175s] checking whether -lc should be explicitly linked in... no [ 175s] checking dynamic linker characteristics... GNU/Linux ld.so [ 175s] checking how to hardcode library paths into programs... immediate [ 175s] checking whether stripping libraries is possible... yes [ 175s] checking if libtool supports shared libraries... yes [ 175s] checking whether to build shared libraries... yes [ 175s] checking whether to build static libraries... no [ 175s] configure: edje_cc set to /bin/edje_cc [ 175s] configure: edje_codegen set to /bin/edje_codegen [ 175s] checking whether to build edje_cc binary... yes [ 175s] checking whether to build edje_decc binary... yes [ 175s] checking whether to build edje_recc binary... yes [ 175s] checking whether to build edje_player binary... yes [ 175s] checking whether to build edje_inspector binary... yes [ 175s] checking whether to build edje_external_inspector binary... yes [ 175s] checking whether to build edje_watch binary... yes [ 175s] checking whether to build edje_codegen binary... yes [ 175s] checking for location of Vim data files... Not found, EDC syntax file will not be installed [ 175s] checking for armv7l-unknown-linux-gnueabi-gcc... gcc [ 175s] checking whether we are using the GNU C compiler... (cached) yes [ 175s] checking whether gcc accepts -g... (cached) yes [ 175s] checking for gcc option to accept ISO C89... (cached) none needed [ 175s] checking dependency style of gcc... (cached) gcc3 [ 175s] checking whether to build documentation... yes [ 175s] checking for doxygen... no [ 175s] WARNING: [ 175s] The doxygen program was not found in your execute path. [ 175s] You may have doxygen installed somewhere not covered by your path. [ 175s] [ 175s] If this is the case make sure you have the packages installed, AND [ 175s] that the doxygen program is in your execute path (see your [ 175s] shell manual page on setting the $PATH environment variable), OR [ 175s] alternatively, specify the program to use with --with-doxygen. [ 175s] configure: WARNING: no doxygen detected. Documentation will not be built [ 175s] checking for a Python interpreter with version >= 2.5... none [ 175s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 175s] checking for pkg-config... /usr/bin/pkg-config [ 175s] checking pkg-config is at least version 0.9.0... yes [ 175s] checking for LUA... yes [ 176s] checking for MINIMAL... yes [ 176s] checking for EDJE... yes [ 176s] checking for ECORE_IMF... yes [ 176s] checking for EIO... no [ 176s] checking for SNDFILE... yes [ 176s] checking for REMIX... yes [ 176s] checking for VORBISENC... no [ 176s] checking for ALSA... no [ 176s] checking for PA... yes [ 176s] checking for FLAC... yes [ 176s] checking for EDJE_CC... yes [ 177s] checking for EDJE_DECC... yes [ 177s] checking for EDJE_PLAYER... yes [ 177s] checking for EDJE_INSPECTOR... yes [ 177s] checking for EDJE_EXTERNAL_INSPECTOR... yes [ 177s] checking for EDJE_WATCH... no [ 177s] checking for EDJE_CODEGEN... yes [ 177s] checking locale.h usability... yes [ 177s] checking locale.h presence... yes [ 177s] checking for locale.h... yes [ 177s] checking sys/resource.h usability... yes [ 177s] checking sys/resource.h presence... yes [ 177s] checking for sys/resource.h... yes [ 177s] checking for PATH_MAX in limits.h... yes [ 177s] checking whether gcc and cc understand -c and -o together... yes [ 177s] checking for an ANSI C-conforming const... yes [ 177s] checking for gcc option to accept ISO C99... -std=gnu99 [ 177s] checking for gcc -std=gnu99 option to accept ISO Standard C... (cached) -std=gnu99 [ 177s] checking for ANSI C header files... (cached) yes [ 177s] checking for __attribute__... yes [ 177s] checking for library containing strerror... none required [ 177s] checking for size_t... yes [ 177s] checking for working alloca.h... yes [ 177s] checking for alloca... yes [ 177s] checking for realpath... yes [ 177s] checking whether tests are built... no [ 177s] checking whether to use profiling instrumentation... no [ 177s] configure: creating ./config.status [ 178s] config.status: creating edje.pc [ 178s] config.status: creating edje.spec [ 178s] config.status: creating Makefile [ 178s] config.status: creating data/Makefile [ 178s] config.status: creating data/include/Makefile [ 178s] config.status: creating doc/Makefile [ 178s] config.status: creating doc/Doxyfile [ 178s] config.status: creating src/Makefile [ 178s] config.status: creating src/lib/Makefile [ 178s] config.status: creating src/bin/Makefile [ 178s] config.status: creating src/bin/epp/Makefile [ 178s] config.status: creating src/modules/Makefile [ 178s] config.status: creating src/modules/alsa_snd_player/Makefile [ 178s] config.status: creating src/modules/pa_snd_player/Makefile [ 178s] config.status: creating src/modules/eet_snd_reader/Makefile [ 178s] config.status: creating src/modules/multisense_factory/Makefile [ 178s] config.status: creating src/tests/Makefile [ 178s] config.status: creating utils/Makefile [ 178s] config.status: creating src/examples/Makefile [ 178s] config.status: creating config.h [ 178s] config.status: config.h is unchanged [ 178s] config.status: executing depfiles commands [ 178s] config.status: executing libtool commands [ 178s] [ 178s] [ 178s] [ 178s] ------------------------------------------------------------------------ [ 178s] edje 1.7.99.0 [ 178s] ------------------------------------------------------------------------ [ 178s] [ 178s] Configuration Options Summary: [ 178s] [ 178s] Amalgamation.........: no [ 178s] Ecore IMF............: yes [ 178s] EIO..................: no [ 178s] LibRemix.............: yes [ 178s] Libsndfile...........: yes [ 178s] Ogg/Vorbis...........: no [ 178s] LibFLAC..............: yes [ 178s] LibALSA..............: no [ 178s] LibPA................: yes [ 178s] EDJE_PROGRAM_CACHE...: no [ 178s] EDJE_CALC_CACHE......: yes [ 178s] Fixed point..........: no [ 178s] Documentation........: no [ 178s] Tests................: no [ 178s] Coverage.............: no [ 178s] Examples.............: install: build:no [ 178s] [ 178s] Programs: [ 178s] [ 178s] Build edje_cc................: yes [ 178s] Build edje_decc..............: yes [ 178s] Build edje_recc..............: yes [ 178s] Build edje_player............: yes [ 178s] Build edje_inspector.........: yes [ 178s] Build edje_external_inspector: yes [ 178s] Build edje_watch.............: no [ 178s] Build edje_codegen...........: yes [ 178s] [ 178s] Compilation............: make (or gmake) [ 178s] CPPFLAGS.............: [ 178s] CFLAGS...............: -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -fvisibility=hidden -ffast-math -fPIC [ 178s] LDFLAGS..............: -fvisibility=hidden -Wl,--hash-style=both -Wl,--as-needed [ 178s] [ 178s] Installation...........: make install (as root if needed, with 'su' or 'sudo') [ 178s] prefix...............: /usr [ 178s] [ 179s] + make -j4 [ 179s] make all-recursive [ 179s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57' [ 179s] Making all in data [ 179s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/data' [ 179s] Making all in include [ 179s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/data/include' [ 179s] make[3]: Nothing to be done for `all'. [ 179s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/data/include' [ 179s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/data' [ 179s] make[3]: Nothing to be done for `all-am'. [ 179s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/data' [ 179s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/data' [ 179s] Making all in src [ 179s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src' [ 179s] Making all in lib [ 179s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/lib' [ 179s] CC edje_box_layout.lo [ 179s] CC edje_cache.lo [ 179s] CC edje_calc.lo [ 179s] CC edje_callbacks.lo [ 179s] CC edje_container.lo [ 179s] CC edje_data.lo [ 179s] CC edje_edit.lo [ 179s] CC edje_embryo.lo [ 180s] CC edje_entry.lo [ 180s] CC edje_external.lo [ 180s] CC edje_load.lo [ 180s] CC edje_lua.lo [ 180s] CC edje_lua2.lo [ 181s] CC edje_lua_script_only.lo [ 181s] CC edje_main.lo [ 181s] CC edje_match.lo [ 181s] CC edje_message_queue.lo [ 181s] CC edje_misc.lo [ 181s] CC edje_module.lo [ 181s] CC edje_multisense.lo [ 181s] CC edje_program.lo [ 182s] CC edje_script_only.lo [ 182s] edje_multisense.c: In function '_edje_multisense_shutdown': [ 182s] edje_multisense.c:506:14: warning: ignoring return value of 'write', declared with attribute warn_unused_result [ 182s] CC edje_smart.lo [ 182s] edje_multisense.c:489:37: warning: 'multisense_factory_shutdown' may be used uninitialized in this function [ 182s] CC edje_text.lo [ 182s] CC edje_textblock_styles.lo [ 182s] CC edje_util.lo [ 182s] CC edje_var.lo [ 183s] CCLD libedje.la [ 183s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/lib' [ 183s] Making all in bin [ 183s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/bin' [ 183s] Making all in epp [ 183s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/bin/epp' [ 183s] CC epp-cppalloc.o [ 183s] CC epp-cpperror.o [ 183s] CC epp-cppexp.o [ 183s] CC epp-cpphash.o [ 183s] CC epp-cpplib.o [ 183s] CC epp-cppmain.o [ 185s] CCLD epp [ 185s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/bin/epp' [ 185s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/bin' [ 185s] CC edje_cc-edje_cc.o [ 185s] CC edje_cc-edje_cc_out.o [ 185s] CC edje_cc-edje_cc_parse.o [ 185s] CC edje_cc-edje_cc_mem.o [ 185s] CC edje_cc-edje_cc_handlers.o [ 186s] CC edje_cc-edje_cc_sources.o [ 186s] CC edje_cc-edje_multisense_convert.o [ 186s] CC edje_decc-edje_decc.o [ 186s] CC edje_decc-edje_cc_mem.o [ 186s] CC edje_decc-edje_cc_sources.o [ 186s] CC edje_player-edje_player.o [ 186s] CC edje_inspector-edje_inspector.o [ 186s] CC edje_external_inspector-edje_external_inspector.o [ 186s] CC edje_codegen-edje_codegen.o [ 186s] edje_codegen.c: In function '_parse_parts': [ 186s] edje_codegen.c:777:23: warning: unused variable 'typename' [ 187s] CCLD edje_decc [ 187s] CCLD edje_player [ 187s] edje_codegen.c: In function 'main': [ 187s] edje_codegen.c:1088:10: warning: 'source' may be used uninitialized in this function [ 187s] edje_codegen.c:1088:19: warning: 'header' may be used uninitialized in this function [ 187s] CCLD edje_external_inspector [ 187s] CCLD edje_cc [ 187s] CCLD edje_codegen [ 187s] CCLD edje_inspector [ 187s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/bin' [ 187s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/bin' [ 187s] Making all in modules [ 187s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules' [ 187s] Making all in multisense_factory [ 187s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules/multisense_factory' [ 187s] CC module_la-multisense_factory.lo [ 187s] CCLD module.la [ 187s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules/multisense_factory' [ 187s] Making all in eet_snd_reader [ 187s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules/eet_snd_reader' [ 187s] CC libeet_sndfile_reader_la-eet_snd_reader.lo [ 188s] eet_snd_reader.c: In function 'remix_eet_sndfile_create': [ 188s] eet_snd_reader.c:203:14: warning: passing argument 1 of 'free' discards qualifiers from pointer target type [ 188s] //usr/include/stdlib.h:488:13: note: expected 'void *' but argument is of type 'const char *' [ 188s] eet_snd_reader.c:208:14: warning: passing argument 1 of 'free' discards qualifiers from pointer target type [ 188s] //usr/include/stdlib.h:488:13: note: expected 'void *' but argument is of type 'const void *' [ 188s] eet_snd_reader.c: In function 'remix_eet_sndfile_destroy': [ 188s] eet_snd_reader.c:260:14: warning: passing argument 1 of 'free' discards qualifiers from pointer target type [ 188s] //usr/include/stdlib.h:488:13: note: expected 'void *' but argument is of type 'const char *' [ 188s] eet_snd_reader.c: In function 'remix_eet_sndfile_create': [ 188s] eet_snd_reader.c:138:16: warning: 'sound_data' may be used uninitialized in this function [ 188s] CCLD libeet_sndfile_reader.la [ 188s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules/eet_snd_reader' [ 188s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules' [ 188s] make[4]: Nothing to be done for `all-am'. [ 188s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules' [ 188s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules' [ 188s] Making all in tests [ 188s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/tests' [ 188s] make[3]: Nothing to be done for `all'. [ 188s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/tests' [ 188s] Making all in examples [ 188s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/examples' [ 188s] make all-am [ 188s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/examples' [ 188s] make[4]: Nothing to be done for `all-am'. [ 188s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/examples' [ 188s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/examples' [ 188s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src' [ 188s] make[3]: Nothing to be done for `all-am'. [ 188s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src' [ 188s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src' [ 188s] Making all in utils [ 188s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/utils' [ 188s] make[2]: Nothing to be done for `all'. [ 188s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/utils' [ 188s] Making all in doc [ 188s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/doc' [ 188s] make[2]: Nothing to be done for `all'. [ 188s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/doc' [ 188s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57' [ 188s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57' [ 188s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57' [ 188s] + exit 0 [ 188s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.u62ieX [ 188s] + umask 022 [ 188s] + cd /home/abuild/rpmbuild/BUILD [ 188s] + cd edje-1.7.1+svn.77330+build57 [ 188s] + LANG=C [ 188s] + export LANG [ 188s] + unset DISPLAY [ 188s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm [ 188s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm [ 188s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm [ 188s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm install [ 188s] Making install in data [ 188s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/data' [ 188s] Making install in include [ 188s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/data/include' [ 188s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/data/include' [ 188s] make[3]: Nothing to be done for `install-exec-am'. [ 188s] test -z "/usr/share/edje/include" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/share/edje/include" [ 188s] /usr/bin/install -c -m 644 edje.inc '/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/share/edje/include' [ 188s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/data/include' [ 188s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/data/include' [ 188s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/data' [ 188s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/data' [ 188s] make[3]: Nothing to be done for `install-exec-am'. [ 188s] test -z "/usr/share/mime/packages" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/share/mime/packages" [ 188s] /usr/bin/install -c -m 644 edje.xml '/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/share/mime/packages' [ 188s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/data' [ 188s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/data' [ 188s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/data' [ 188s] Making install in src [ 188s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src' [ 188s] Making install in lib [ 188s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/lib' [ 188s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/lib' [ 188s] test -z "/usr/lib" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/lib" [ 188s] /bin/sh ../../libtool --mode=install /usr/bin/install -c libedje.la '/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/lib' [ 188s] libtool: install: /usr/bin/install -c .libs/libedje.so.1.7.99 /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/lib/libedje.so.1.7.99 [ 188s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/lib && { ln -s -f libedje.so.1.7.99 libedje.so.1 || { rm -f libedje.so.1 && ln -s libedje.so.1.7.99 libedje.so.1; }; }) [ 188s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/lib && { ln -s -f libedje.so.1.7.99 libedje.so || { rm -f libedje.so && ln -s libedje.so.1.7.99 libedje.so; }; }) [ 188s] libtool: install: /usr/bin/install -c .libs/libedje.lai /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/lib/libedje.la [ 188s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 188s] test -z "/usr/include/edje-1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/include/edje-1" [ 188s] /usr/bin/install -c -m 644 Edje.h Edje_Edit.h '/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/include/edje-1' [ 188s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/lib' [ 188s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/lib' [ 188s] Making install in bin [ 188s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/bin' [ 188s] Making install in epp [ 188s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/bin/epp' [ 188s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/bin/epp' [ 188s] make[4]: Nothing to be done for `install-exec-am'. [ 188s] test -z "/usr/lib/edje/utils" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/lib/edje/utils" [ 188s] /bin/sh ../../../libtool --mode=install /usr/bin/install -c epp '/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/lib/edje/utils' [ 188s] libtool: install: /usr/bin/install -c epp /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/lib/edje/utils/epp [ 188s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/bin/epp' [ 188s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/bin/epp' [ 188s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/bin' [ 188s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/bin' [ 188s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/bin" [ 188s] /bin/sh ../../libtool --mode=install /usr/bin/install -c edje_cc edje_decc edje_player edje_inspector edje_external_inspector edje_codegen '/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/bin' [ 188s] libtool: install: warning: `../../src/lib/libedje.la' has not been installed in `/usr/lib' [ 188s] libtool: install: /usr/bin/install -c .libs/edje_cc /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/bin/edje_cc [ 188s] libtool: install: warning: `../../src/lib/libedje.la' has not been installed in `/usr/lib' [ 188s] libtool: install: /usr/bin/install -c .libs/edje_decc /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/bin/edje_decc [ 188s] libtool: install: warning: `../../src/lib/libedje.la' has not been installed in `/usr/lib' [ 188s] libtool: install: /usr/bin/install -c .libs/edje_player /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/bin/edje_player [ 188s] libtool: install: warning: `../../src/lib/libedje.la' has not been installed in `/usr/lib' [ 188s] libtool: install: /usr/bin/install -c .libs/edje_inspector /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/bin/edje_inspector [ 188s] libtool: install: warning: `../../src/lib/libedje.la' has not been installed in `/usr/lib' [ 188s] libtool: install: /usr/bin/install -c .libs/edje_external_inspector /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/bin/edje_external_inspector [ 188s] libtool: install: warning: `../../src/lib/libedje.la' has not been installed in `/usr/lib' [ 188s] libtool: install: /usr/bin/install -c .libs/edje_codegen /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/bin/edje_codegen [ 188s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/bin" [ 188s] /usr/bin/install -c edje_recc '/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/bin' [ 188s] make[4]: Nothing to be done for `install-data-am'. [ 188s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/bin' [ 188s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/bin' [ 188s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/bin' [ 188s] Making install in modules [ 188s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules' [ 188s] Making install in multisense_factory [ 188s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules/multisense_factory' [ 188s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules/multisense_factory' [ 188s] make[4]: Nothing to be done for `install-exec-am'. [ 188s] test -z "/usr/lib/edje/modules/multisense_factory/linux-gnueabi-armv7l-1.0.0" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/lib/edje/modules/multisense_factory/linux-gnueabi-armv7l-1.0.0" [ 188s] /bin/sh ../../../libtool --mode=install /usr/bin/install -c module.la '/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/lib/edje/modules/multisense_factory/linux-gnueabi-armv7l-1.0.0' [ 188s] libtool: install: warning: relinking `module.la' [ 188s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules/multisense_factory; /bin/sh /home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/libtool --silent --tag CC --tag disable-static --mode=relink gcc -std=gnu99 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -fvisibility=hidden -ffast-math -fPIC -no-undefined -module -avoid-version ../../../src/lib/libedje.la -pthread -leet -levas -lrt -lecore -leina -lecore_evas -lecore_file -lecore_input -lembryo -llua -lm -ldl -lremix -ldl -lctxdata -lsndfile -fvisibility=hidden -Wl,--hash-style=both -Wl,--as-needed -o module.la -rpath /usr/lib/edje/modules/multisense_factory/linux-gnueabi-armv7l-1.0.0 module_la-multisense_factory.lo -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm) [ 189s] libtool: install: /usr/bin/install -c .libs/module.soT /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/lib/edje/modules/multisense_factory/linux-gnueabi-armv7l-1.0.0/module.so [ 189s] libtool: install: /usr/bin/install -c .libs/module.lai /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/lib/edje/modules/multisense_factory/linux-gnueabi-armv7l-1.0.0/module.la [ 189s] libtool: install: warning: remember to run `libtool --finish /usr/lib/edje/modules/multisense_factory/linux-gnueabi-armv7l-1.0.0' [ 189s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules/multisense_factory' [ 189s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules/multisense_factory' [ 189s] Making install in eet_snd_reader [ 189s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules/eet_snd_reader' [ 189s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules/eet_snd_reader' [ 189s] make[4]: Nothing to be done for `install-exec-am'. [ 189s] test -z "/usr/lib/remix" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/lib/remix" [ 189s] /bin/sh ../../../libtool --mode=install /usr/bin/install -c libeet_sndfile_reader.la '/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/lib/remix' [ 189s] libtool: install: /usr/bin/install -c .libs/libeet_sndfile_reader.so /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/lib/remix/libeet_sndfile_reader.so [ 189s] libtool: install: /usr/bin/install -c .libs/libeet_sndfile_reader.lai /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/lib/remix/libeet_sndfile_reader.la [ 189s] libtool: install: warning: remember to run `libtool --finish /usr/lib/remix' [ 189s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules/eet_snd_reader' [ 189s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules/eet_snd_reader' [ 189s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules' [ 189s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules' [ 189s] make[4]: Nothing to be done for `install-exec-am'. [ 189s] make[4]: Nothing to be done for `install-data-am'. [ 189s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules' [ 189s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules' [ 189s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/modules' [ 189s] Making install in tests [ 189s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/tests' [ 189s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/tests' [ 189s] make[3]: Nothing to be done for `install-exec-am'. [ 189s] make[3]: Nothing to be done for `install-data-am'. [ 189s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/tests' [ 189s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/tests' [ 189s] Making install in examples [ 189s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/examples' [ 189s] /usr/bin/make install-am [ 189s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/examples' [ 189s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/examples' [ 189s] make[4]: Nothing to be done for `install-exec-am'. [ 189s] test -z "/usr/share/edje/examples" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/share/edje/examples" [ 189s] test -z "/usr/share/edje/examples" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/share/edje/examples" [ 189s] /usr/bin/install -c -m 644 basic.edc swallow.edc text.edc table.edc box.edc codegen.edc drag.edc edje_example.edc embryo_custom_state.edc embryo_pong.edc embryo_run_program.edc embryo_set_state.edc embryo_set_text.edc embryo_timer.edc external_elm_anchorblock.edc external_elm_button.edc external_elm_check.edc external_elm_panes.edc external_emotion_elm.edc toggle_using_filter.edc signals-messages.edc color-class.edc perspective.edc animations.edc lua_script.edc sigtest.edc animations2.edc basic2.edc signalsBubble.edc multisense.edc bubble.png red.png test.png Vera.ttf duck.wav edje-codegen-example.c edje_example.c edje-basic.c edje-swallow.c edje-text.c '/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/share/edje/examples' [ 189s] /usr/bin/install -c -m 644 edje-table.c edje-box.c edje-box2.c edje-drag.c edje-signals-messages.c edje-color-class.c edje-perspective.c edje-animations.c sigtest.c animations2.c edje-basic2.c signals2.c edje-swallow2.c edje-multisense.c '/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/share/edje/examples' [ 189s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/examples' [ 189s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/examples' [ 189s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src/examples' [ 189s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src' [ 189s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src' [ 189s] make[3]: Nothing to be done for `install-exec-am'. [ 189s] make[3]: Nothing to be done for `install-data-am'. [ 189s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src' [ 189s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src' [ 189s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/src' [ 189s] Making install in utils [ 189s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/utils' [ 189s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/utils' [ 189s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/bin" [ 189s] make[2]: Nothing to be done for `install-data-am'. [ 189s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/utils' [ 189s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/utils' [ 189s] Making install in doc [ 189s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/doc' [ 189s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/doc' [ 189s] make[2]: Nothing to be done for `install-exec-am'. [ 189s] make[2]: Nothing to be done for `install-data-am'. [ 189s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/doc' [ 189s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/doc' [ 189s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57' [ 189s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57' [ 189s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/bin" [ 189s] test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/lib/pkgconfig" [ 189s] /usr/bin/install -c -m 644 edje.pc '/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/lib/pkgconfig' [ 189s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57' [ 189s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57' [ 189s] + rm -f /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/share/info/dir [ 189s] + find /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm -regex '.*\.la$' [ 189s] + xargs rm -f -- [ 189s] + find /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm -regex '.*\.a$' [ 189s] + xargs rm -f -- [ 189s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/share/license [ 189s] + cp /home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57/COPYING /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/share/license/edje [ 189s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build57 [ 189s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/bin/edje_cc [ 189s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/bin/edje_codegen [ 189s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/bin/edje_decc [ 189s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/bin/edje_external_inspector [ 189s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/bin/edje_inspector [ 189s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/bin/edje_player [ 189s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/lib/edje/modules/multisense_factory/linux-gnueabi-armv7l-1.0.0/module.so [ 189s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/lib/edje/utils/epp [ 190s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/lib/libedje.so.1.7.99 [ 190s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm/usr/lib/remix/libeet_sndfile_reader.so [ 190s] symlinked /usr/lib/debug/usr/lib/libedje.so.1.7.99.debug to /usr/lib/debug/usr/lib/libedje.so.1.debug [ 190s] symlinked /usr/lib/debug/usr/lib/libedje.so.1.7.99.debug to /usr/lib/debug/usr/lib/libedje.so.debug [ 190s] 4901 blocks [ 190s] + /usr/lib/rpm/check-buildroot [ 190s] + /usr/lib/rpm//brp-compress [ 190s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 190s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 190s] + /usr/lib/rpm/brp-python-bytecompile [ 190s] + /usr/lib/rpm/brp-python-hardlink [ 190s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm [ 190s] Processing files: edje-1.7.1+svn.77330+build57-2.7.armv7l [ 190s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl [ 190s] cXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 190s] [ 191s] Provides: libedje.so.1 libeet_sndfile_reader.so module.so [ 191s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 191s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 191s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 191s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 191s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libctxdata.so.0 libdl.so.2 libecore.so.1 libecore_evas.so.1 libecore_file.so.1 libecore_imf.so.1 libecore_imf_evas.so.1 libecore_input.so.1 libedje.so.1 libeet.so.1 libeina.so.1 libembryo.so.1 libevas.so.1 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) liblua-5.1.so libm.so.6 libpthread.so.0 libpthread.so.0(GLIBC_2.4) libremix.so.0 librt.so.1 libsndfile.so.1 libsndfile.so.1(libsndfile.so.1.0) [ 191s] Processing files: edje-devel-1.7.1+svn.77330+build57-2.7.armv7l [ 191s] Provides: pkgconfig(edje) = 1.7.99.0 [ 191s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 191s] Requires: /usr/bin/pkg-config libedje.so.1 pkgconfig(ecore) >= 1.6.99 pkgconfig(ecore-evas) >= 1.6.99 pkgconfig(ecore-imf) >= 1.6.99 pkgconfig(ecore-imf-evas) >= 1.6.99 pkgconfig(eet) >= 1.6.99 pkgconfig(eina) >= 1.6.99 pkgconfig(embryo) >= 1.6.99 pkgconfig(evas) >= 1.6.99 pkgconfig(libpulse) >= 0.9.21 pkgconfig(lua) pkgconfig(remix) >= 0.2.4 pkgconfig(sndfile) >= 1.0.21 [ 191s] Processing files: edje-tools-1.7.1+svn.77330+build57-2.7.armv7l [ 191s] Provides: edje-bin [ 191s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 191s] Requires: /bin/sh ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libFLAC.so.8 libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libecore.so.1 libecore_evas.so.1 libecore_file.so.1 libedje.so.1 libeet.so.1 libeina.so.1 libevas.so.1 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) liblua-5.1.so libm.so.6 libm.so.6(GLIBC_2.4) libpthread.so.0 libpthread.so.0(GLIBC_2.4) libsndfile.so.1 libsndfile.so.1(libsndfile.so.1.0) [ 191s] Obsoletes: edje-bin [ 191s] Processing files: edje-debuginfo-1.7.1+svn.77330+build57-2.7.armv7l [ 191s] Processing files: edje-debugsource-1.7.1+svn.77330+build57-2.7.armv7l [ 191s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm [ 191s] Wrote: /home/abuild/rpmbuild/SRPMS/edje-1.7.1+svn.77330+build57-2.7.src.rpm [ 191s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/edje-1.7.1+svn.77330+build57-2.7.armv7l.rpm [ 191s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/edje-devel-1.7.1+svn.77330+build57-2.7.armv7l.rpm [ 191s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/edje-tools-1.7.1+svn.77330+build57-2.7.armv7l.rpm [ 192s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/edje-debuginfo-1.7.1+svn.77330+build57-2.7.armv7l.rpm [ 193s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/edje-debugsource-1.7.1+svn.77330+build57-2.7.armv7l.rpm [ 193s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.gJ8mNs [ 193s] + umask 022 [ 193s] + cd /home/abuild/rpmbuild/BUILD [ 193s] + cd edje-1.7.1+svn.77330+build57 [ 193s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build57-2.7.arm [ 193s] + exit 0 [ 193s] ... checking for files with abuild user/group [ 193s] ... creating baselibs [ 194s] ... comparing built packages with the former built [ 194s] /usr/lib/build/rpm-check.sh [ 194s] compare /.build.oldpackages/edje-1.7.1+svn.77330+build57-2.6.src.rpm /home/abuild/rpmbuild/SRPMS/edje-1.7.1+svn.77330+build57-2.7.src.rpm [ 194s] compare /.build.oldpackages/edje-1.7.1+svn.77330+build57-2.6.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/edje-1.7.1+svn.77330+build57-2.7.armv7l.rpm [ 194s] --- /tmp/tmp.CG3wX8OT2h 2014-01-02 10:45:43.651041883 +0000 [ 194s] +++ /tmp/tmp.5nRRkGECSH 2014-01-02 10:45:43.659041882 +0000 [ 194s] @@ -9,7 +9,7 @@ [ 194s] - edje_cc: Compiles EDC files. [ 194s] - edje_decc: Used to decompile compiled edje files. [ 194s] - edje_recc: A convenience script to recompile EDC files. [ 194s] - tizen Tizen:2.2:Main obs://w16.vlan200.tizendev.org/Tizen:2.2:Main/standard/6c55d6589bc50beb55f6a1f0483011d2-edje BSD BSD [ 194s] + tizen Tizen:2.2:Main obs://build.tizen.org/Tizen:2.2:Main/standard/6c55d6589bc50beb55f6a1f0483011d2-edje BSD BSD [ 194s] System/Libraries http://www.enlightenment.org/ (none) (none) (none) [ 194s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 194s] cpio gzip 9 [ 194s] RPM meta information is different [ 194s] compare /.build.oldpackages/edje-debuginfo-1.7.1+svn.77330+build57-2.6.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/edje-debuginfo-1.7.1+svn.77330+build57-2.7.armv7l.rpm [ 194s] --- /tmp/tmp.M67Iz0QaH8 2014-01-02 10:45:43.803041878 +0000 [ 194s] +++ /tmp/tmp.9qZeYW7pn3 2014-01-02 10:45:43.815041878 +0000 [ 194s] @@ -3,7 +3,7 @@ [ 194s] This package provides debug information for package edje. [ 194s] Debug information is useful when developing applications that use this [ 194s] package or when debugging this package. [ 194s] - tizen Tizen:2.2:Main obs://w16.vlan200.tizendev.org/Tizen:2.2:Main/standard/6c55d6589bc50beb55f6a1f0483011d2-edje BSD BSD [ 194s] + tizen Tizen:2.2:Main obs://build.tizen.org/Tizen:2.2:Main/standard/6c55d6589bc50beb55f6a1f0483011d2-edje BSD BSD [ 194s] Development/Debug http://www.enlightenment.org/ (none) (none) (none) [ 194s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 194s] cpio gzip 9 [ 195s] RPM meta information is different [ 195s] compare /.build.oldpackages/edje-debugsource-1.7.1+svn.77330+build57-2.6.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/edje-debugsource-1.7.1+svn.77330+build57-2.7.armv7l.rpm [ 197s] --- /tmp/tmp.Ug7khzDHYP 2014-01-02 10:45:46.403041797 +0000 [ 197s] +++ /tmp/tmp.00WRoOu15t 2014-01-02 10:45:46.411041797 +0000 [ 197s] @@ -3,7 +3,7 @@ [ 197s] This package provides debug sources for package edje. [ 197s] Debug sources are useful when developing applications that use this [ 197s] package or when debugging this package. [ 197s] - tizen Tizen:2.2:Main obs://w16.vlan200.tizendev.org/Tizen:2.2:Main/standard/6c55d6589bc50beb55f6a1f0483011d2-edje BSD BSD [ 197s] + tizen Tizen:2.2:Main obs://build.tizen.org/Tizen:2.2:Main/standard/6c55d6589bc50beb55f6a1f0483011d2-edje BSD BSD [ 197s] Development/Debug http://www.enlightenment.org/ (none) (none) (none) [ 197s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 197s] cpio gzip 9 [ 198s] RPM meta information is different [ 198s] compare /.build.oldpackages/edje-devel-1.7.1+svn.77330+build57-2.6.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/edje-devel-1.7.1+svn.77330+build57-2.7.armv7l.rpm [ 199s] --- /tmp/tmp.MZYXriLchH 2014-01-02 10:45:48.343041737 +0000 [ 199s] +++ /tmp/tmp.XmUqgXG5j4 2014-01-02 10:45:48.351041737 +0000 [ 199s] @@ -1,7 +1,7 @@ [ 199s] edje-devel 1.7.1+svn.77330+build57 (none) [ 199s] Complex Graphical Design/Layout Engine (devel) [ 199s] Edje is a graphical layout and animation library (devel) [ 199s] - tizen Tizen:2.2:Main obs://w16.vlan200.tizendev.org/Tizen:2.2:Main/standard/6c55d6589bc50beb55f6a1f0483011d2-edje BSD BSD [ 199s] + tizen Tizen:2.2:Main obs://build.tizen.org/Tizen:2.2:Main/standard/6c55d6589bc50beb55f6a1f0483011d2-edje BSD BSD [ 199s] Development/Libraries http://www.enlightenment.org/ (none) (none) (none) [ 199s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 199s] cpio gzip 9 [ 199s] RPM meta information is different [ 199s] compare /.build.oldpackages/edje-tools-1.7.1+svn.77330+build57-2.6.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/edje-tools-1.7.1+svn.77330+build57-2.7.armv7l.rpm [ 199s] --- /tmp/tmp.5TFGgRS1IF 2014-01-02 10:45:48.743041725 +0000 [ 199s] +++ /tmp/tmp.xLf0Di0k3X 2014-01-02 10:45:48.755041725 +0000 [ 199s] @@ -1,7 +1,7 @@ [ 199s] edje-tools 1.7.1+svn.77330+build57 (none) [ 199s] Complex Graphical Design/Layout Engine (tools) [ 199s] Edje is a graphical layout and animation library (tools) [ 199s] - tizen Tizen:2.2:Main obs://w16.vlan200.tizendev.org/Tizen:2.2:Main/standard/6c55d6589bc50beb55f6a1f0483011d2-edje BSD BSD [ 199s] + tizen Tizen:2.2:Main obs://build.tizen.org/Tizen:2.2:Main/standard/6c55d6589bc50beb55f6a1f0483011d2-edje BSD BSD [ 199s] Development/Libraries http://www.enlightenment.org/ (none) (none) (none) [ 199s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 199s] cpio gzip 9 [ 199s] RPM meta information is different [ 199s] ... saving built statistics [ 199s] ... saving built packages [ 199s] /home/abuild/rpmbuild/RPMS/armv7l/edje-1.7.1+svn.77330+build57-2.7.armv7l.rpm [ 199s] /home/abuild/rpmbuild/RPMS/armv7l/edje-debuginfo-1.7.1+svn.77330+build57-2.7.armv7l.rpm [ 199s] /home/abuild/rpmbuild/RPMS/armv7l/edje-debugsource-1.7.1+svn.77330+build57-2.7.armv7l.rpm [ 199s] /home/abuild/rpmbuild/RPMS/armv7l/edje-devel-1.7.1+svn.77330+build57-2.7.armv7l.rpm [ 199s] /home/abuild/rpmbuild/RPMS/armv7l/edje-tools-1.7.1+svn.77330+build57-2.7.armv7l.rpm [ 199s] /home/abuild/rpmbuild/SRPMS/edje-1.7.1+svn.77330+build57-2.7.src.rpm [ 199s] /home/abuild/rpmbuild/OTHER/_statistics [ 199s] [ 199s] w04 finished "build edje.spec" at Thu Jan 2 10:45:49 UTC 2014. [ 199s] [ 203s] [ 174.129330] SysRq : Power Off [ 203s] [ 174.236230] Power down. [ 203s] build: extracting built packages... [ 203s] edje-1.7.1+svn.77330+build57-2.7.armv7l.rpm [ 203s] edje-debuginfo-1.7.1+svn.77330+build57-2.7.armv7l.rpm [ 203s] edje-debugsource-1.7.1+svn.77330+build57-2.7.armv7l.rpm [ 203s] edje-devel-1.7.1+svn.77330+build57-2.7.armv7l.rpm [ 203s] edje-tools-1.7.1+svn.77330+build57-2.7.armv7l.rpm [ 203s] edje-1.7.1+svn.77330+build57-2.7.src.rpm [ 203s] _statistics