[ 0s] Using BUILD_ROOT=/srv/build/root_2/.mount [ 0s] Using BUILD_ARCH=armv7el [ 0s] Doing kvm build in /srv/build/root_2/root [ 0s] [ 0s] [ 0s] w02 started "build librua.spec" at Thu Nov 7 14:11:39 UTC 2013. [ 0s] [ 0s] Building librua for project 'Tizen:2.2:Main' repository 'standard' arch 'armv7el' srcmd5 '78faceb2540d491bd791523269757fef' [ 0s] [ 0s] processing specfile /srv/build/root_2/.build-srcdir/librua.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_2/.build-srcdir/librua.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_2/.build.rpmlist /srv/build/root_2/.build-srcdir/librua.spec build rpmlint-Factory ... [ 1s] hostname: Name or service not known [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils [ 1s] breaking dependency eglibc-common -> coreutils [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc-common -> eglibc [ 1s] cycle: libgcc -> eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: libgcc -> eglibc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: rpm-libs -> rpm [ 1s] breaking dependency rpm -> rpm-libs [ 1s] [1/56] preinstalling libgcc... [ 1s] [2/56] preinstalling setup... [ 1s] [3/56] preinstalling filesystem... [ 1s] [4/56] preinstalling eglibc... [ 1s] [5/56] preinstalling eglibc-common... [ 1s] [6/56] preinstalling bash... [ 1s] [7/56] preinstalling bzip2-libs... [ 1s] [8/56] preinstalling diffutils... [ 1s] [9/56] preinstalling elfutils-libelf... [ 1s] [10/56] preinstalling libattr... [ 1s] [11/56] preinstalling liblua... [ 1s] [12/56] preinstalling libstdc++... [ 1s] [13/56] preinstalling ncurses-libs... [ 1s] [14/56] preinstalling nspr... [ 1s] [15/56] preinstalling nss-softokn-freebl... [ 1s] [16/56] preinstalling popt... [ 1s] [17/56] preinstalling readline... [ 1s] [18/56] preinstalling sed... [ 1s] [19/56] preinstalling sqlite... [ 1s] [20/56] preinstalling xz-libs... [ 1s] [21/56] preinstalling zlib... [ 2s] [22/56] preinstalling qemu.x86_64... [ 2s] [23/56] preinstalling libcap... [ 2s] [24/56] preinstalling libacl... [ 2s] [25/56] preinstalling libfile... [ 2s] [26/56] preinstalling bzip2... [ 2s] [27/56] preinstalling nss... [ 2s] [28/56] preinstalling tar... [ 2s] [29/56] preinstalling coreutils... [ 2s] [30/56] preinstalling file... [ 2s] [31/56] preinstalling rpm... [ 2s] [32/56] preinstalling tizen-accelerator... [ 2s] [33/56] preinstalling rpm-libs... [ 2s] [34/56] preinstalling gmp-x86-arm... [ 2s] [35/56] preinstalling mpc-x86-arm... [ 2s] [36/56] preinstalling mpfr-x86-arm... [ 2s] [37/56] preinstalling bzip2-libs-x86-arm... [ 2s] [38/56] preinstalling eglibc-x86-arm... [ 3s] [39/56] preinstalling elfutils-libelf-x86-arm... [ 3s] [40/56] preinstalling libacl-x86-arm... [ 3s] [41/56] preinstalling libattr-x86-arm... [ 3s] [42/56] preinstalling libcap-x86-arm... [ 3s] [43/56] preinstalling libfile-x86-arm... [ 3s] [44/56] preinstalling libgcc-x86-arm... [ 3s] [45/56] preinstalling liblua-x86-arm... [ 3s] [46/56] preinstalling ncurses-libs-x86-arm... [ 3s] [47/56] preinstalling nspr-x86-arm... [ 3s] [48/56] preinstalling nss-softokn-freebl-x86-arm... [ 3s] [49/56] preinstalling nss-x86-arm... [ 3s] [50/56] preinstalling popt-x86-arm... [ 3s] [51/56] preinstalling rpm-libs-x86-arm... [ 3s] [52/56] preinstalling sqlite-x86-arm... [ 3s] [53/56] preinstalling xz-libs-x86-arm... [ 3s] [54/56] preinstalling zlib-x86-arm... [ 3s] [55/56] preinstalling bash-x86-arm... [ 3s] [56/56] preinstalling rpm-x86-arm... [ 3s] [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl-libs -> perl [ 3s] [1/8] preinstalling e2fsprogs-libs... [ 3s] [2/8] preinstalling libpcre... [ 3s] [3/8] preinstalling libuuid... [ 3s] [4/8] preinstalling grep... [ 3s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 4s] copying packages... [ 4s] reordering...cycle: bash -> eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> bash [ 4s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 4s] breaking dependency eglibc-common -> coreutils [ 4s] cycle: eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> findutils [ 4s] breaking dependency eglibc-common -> findutils [ 4s] cycle: eglibc -> eglibc-common -> grep [ 4s] breaking dependency grep -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 4s] breaking dependency grep -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 4s] breaking dependency libpcre -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 4s] breaking dependency libpcre -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 4s] breaking dependency libstdc++ -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 4s] breaking dependency eglibc-common -> grep [ 4s] cycle: eglibc -> eglibc-common -> libgcc [ 4s] breaking dependency eglibc -> eglibc-common [ 4s] cycle: eglibc -> libgcc [ 4s] breaking dependency libgcc -> eglibc [ 4s] cycle: filesystem -> setup [ 4s] breaking dependency setup -> filesystem [ 4s] cycle: ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses [ 4s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses-base [ 4s] cycle: perl -> perl-libs [ 4s] breaking dependency perl -> perl-libs [ 4s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 4s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl -> perl-IO-Compress-Zlib [ 4s] breaking dependency perl -> perl-IO-Compress-Zlib [ 4s] cycle: perl -> perl-IO-Compress-Base [ 4s] breaking dependency perl -> perl-IO-Compress-Base [ 4s] cycle: perl -> perl-Module-Pluggable [ 4s] breaking dependency perl -> perl-Module-Pluggable [ 4s] cycle: perl -> perl-Pod-Simple [ 4s] breaking dependency perl -> perl-Pod-Simple [ 4s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 4s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 4s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 4s] cycle: nss -> nss-sysinit [ 4s] breaking dependency nss -> nss-sysinit [ 4s] cycle: perl-CPAN -> perl-Test-Harness [ 4s] breaking dependency perl-Test-Harness -> perl-CPAN [ 4s] cycle: rpm-libs -> rpm [ 4s] breaking dependency rpm -> rpm-libs [ 4s] done [ 8s] booting kvm ... [ 8s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8192 -drive file=/srv/build/root_2/root,if=virtio,cache=none -drive file=/srv/build/root_2/root,if=ide,index=0,cache=none -drive file=/srv/build/root_2/swap,if=virtio,cache=none -smp 4 [ 10s] [ 0.000000] tsc: Fast TSC calibration failed [ 11s] doing fast boot [ 11s] Creating device nodes with udev [ 12s] Waiting for device /dev/vda to appear: ok [ 12s] fsck from util-linux 2.21.2 [ 12s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 12s] /dev/vda: clean, 6849/2097152 files, 243933/8388608 blocks [ 12s] fsck succeeded. Mounting root device read-write. [ 12s] Mounting root /dev/vda [ 12s] mount -o rw -t ext4 /dev/vda /root [ 12s] replacing /etc/mtab with symlink to /proc/self/mounts [ 12s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 13s] 2nd stage started in virtual machine [ 13s] machine type: armv7l [ 13s] switching personality to 8... [ 14s] 2nd stage started in virtual machine [ 14s] machine type: armv7l [ 14s] swapon on /dev/vdb [ 14s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 14s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 14s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 14s] logging output to //.build.log... [ 14s] processing specfile /.build-srcdir/librua.spec ... [ 14s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/librua.spec build rpmlint-Factory ... [ 14s] running rpm-x86-arm postinstall script [ 15s] /bin/rpm [ 15s] /usr/bin/rpm2cpio [ 15s] /usr/bin/rpmdb [ 15s] /usr/bin/rpmquery [ 15s] /usr/bin/rpmsign [ 15s] /usr/bin/rpmverify [ 15s] running rpm-libs-x86-arm postinstall script [ 15s] running tizen-accelerator postinstall script [ 15s] running bash-x86-arm postinstall script [ 15s] initializing rpm db... [ 20s] [1/159] installing kernel-headers-3.0.15-1.10 [ 20s] [2/159] installing tizen-release-2.2.0-1.9 [ 20s] [3/159] installing tzdata-2011h-1.10 [ 21s] [4/159] installing libgcc-4.5.3-2.33 [ 22s] [5/159] installing setup-0.1-2.6 [ 22s] [6/159] installing filesystem-0.1-1.9 [ 26s] warning: group lock does not exist - using root [ 26s] warning: group mail does not exist - using root [ 26s] [7/159] installing eglibc-2.13-2.18 [ 27s] [8/159] installing libstdc++-4.5.3-2.33 [ 28s] [9/159] installing eglibc-common-2.13-2.18 [ 30s] /var/tmp/rpm-tmp.BxkmWB: line 2: /usr/bin/xargs: No such file or directory [ 30s] [10/159] installing libstdc++-devel-4.5.3-2.33 [ 30s] [11/159] installing bash-4.1-4.9 [ 31s] [12/159] installing bzip2-libs-1.0.5-5.12 [ 31s] [13/159] installing c-ares-1.7.4-3.22 [ 31s] [14/159] installing cpio-2.8-4.8 [ 31s] [15/159] installing diffutils-3.0-4.8 [ 31s] [16/159] installing e2fsprogs-libs-1.41.9-3.8 [ 31s] [17/159] installing elfutils-libelf-0.152-2.16 [ 31s] [18/159] installing expat-2.0.1-8.12 [ 31s] [19/159] installing fdupes-1.40-42.10 [ 31s] [20/159] installing findutils-4.2.31-2.8 [ 31s] [21/159] installing gdbm-1.8.3-2.33 [ 32s] [22/159] installing libattr-2.4.44-8.12 [ 32s] [23/159] installing libffi-3.0.9-101.1 [ 32s] [24/159] installing libgomp-4.5.3-2.33 [ 32s] [25/159] installing libidn-1.15-7.29 [ 32s] [26/159] installing liblua-5.1.4-7.7 [ 32s] [27/159] installing libuuid-2.20.2-7.7 [ 32s] [28/159] installing lzo-2.03-2.18 [ 32s] [29/159] installing m4-1.4.14-1.9 [ 32s] [30/159] installing make-3.81-1.12 [ 32s] [31/159] installing net-tools-1.60-88.9 [ 33s] [32/159] installing nspr-4.8.7-1.17 [ 38s] [33/159] installing nss-softokn-freebl-3.12.9-3.28 [ 39s] [34/159] installing patch-2.6.1.169-1.9 [ 39s] [35/159] installing pkgconfig-0.25-3.11 [ 39s] [36/159] installing popt-1.16-4.11 [ 39s] [37/159] installing readline-5.2-14.7 [ 39s] [38/159] installing sed-4.1.5-3.8 [ 39s] [39/159] installing smack-1.0slp2+s12-1.11 [ 40s] [40/159] installing sqlite-3.7.13-1.12 [ 40s] [41/159] installing xz-libs-5.0.3-2.17 [ 40s] [42/159] installing zlib-1.2.5-3.18 [ 40s] [43/159] installing gmp-5.0.1-2.16 [ 41s] [44/159] installing libpcre-7.7-4.44 [ 41s] [45/159] installing ncurses-libs-5.7-4.11 [ 41s] [46/159] installing build-compare-2009.10.14-26.14 [ 41s] [47/159] installing qemu.x86_64-1.2-2.10 [ 44s] [48/159] installing eglibc-headers-2.13-2.18 [ 47s] [49/159] installing libcap-2.21-2.10 [ 48s] [50/159] installing sqlite-devel-3.7.13-1.12 [ 49s] [51/159] installing unzip-6.0-10.16 [ 49s] [52/159] installing zlib-devel-1.2.5-3.18 [ 50s] [53/159] installing grep-2.5.1a-63.9 [ 50s] [54/159] installing libacl-2.2.49-3.12 [ 50s] [55/159] installing libfile-5.04-2.11 [ 51s] [56/159] installing libxml2-2.7.8-10.3 [ 52s] [57/159] installing lzo-minilzo-2.03-2.18 [ 52s] [58/159] installing mpfr-3.0.0-1.16 [ 53s] [59/159] installing ncurses-5.7-4.11 [ 53s] [60/159] installing binutils-2.22-1.12 [ 54s] [61/159] installing bzip2-1.0.5-5.12 [ 54s] [62/159] installing glib2-2.32.3-6.3 [ 58s] [63/159] installing libblkid-2.20.2-7.7 [ 58s] [64/159] installing libicu-4.8-2.2 [ 59s] [65/159] installing smack-utils-1.0slp2+s12-1.11 [ 60s] [66/159] installing xz-5.0.3-2.17 [ 60s] [67/159] installing elfutils-libs-0.152-2.16 [ 61s] [68/159] installing nss-3.12.9-3.28 [ 62s] [69/159] installing perl-5.12.1-62.8 [ 67s] [70/159] installing ncurses-base-5.7-4.11 [ 67s] [71/159] installing perl-HTML-Tagset-3.20-8.3 [ 67s] [72/159] installing perl-IO-Compress-Base-2.008-62.8 [ 67s] [73/159] installing perl-Module-Pluggable-3.60-62.8 [ 67s] [74/159] installing perl-Pod-Escapes-1.04-62.8 [ 67s] [75/159] installing perl-TimeDate-1.20-1.3 [ 67s] [76/159] installing eglibc-devel-2.13-2.18 [ 67s] [77/159] installing libicu-devel-4.8-2.2 [ 67s] [78/159] installing lzo-devel-2.03-2.18 [ 67s] [79/159] installing perl-Compress-Raw-Zlib-2.008-62.8 [ 68s] [80/159] installing perl-devel-5.12.1-62.8 [ 68s] [81/159] installing perl-libs-5.12.1-62.8 [ 68s] [82/159] installing tar-1.17-5.11 [ 68s] [83/159] installing coreutils-6.9-9.12 [ 68s] [84/159] installing file-5.04-2.11 [ 68s] [85/159] installing libdlog-0.4.1-17.4 [ 68s] chown: `root:app_logging': invalid user [ 68s] [86/159] installing libmount-2.20.2-7.7 [ 69s] [87/159] installing mpc-0.9-1.16 [ 69s] [88/159] installing openssl-1.0.1c-2.26 [ 69s] [89/159] installing xz-lzma-compat-5.0.3-2.17 [ 69s] [90/159] installing elfutils-0.152-2.16 [ 69s] [91/159] installing nss-sysinit-3.12.9-3.28 [ 69s] [92/159] installing libdlog-devel-0.4.1-17.4 [ 69s] [93/159] installing perl-ExtUtils-ParseXS-2.18-62.8 [ 69s] [94/159] installing perl-Pod-Simple-3.07-62.8 [ 69s] [95/159] installing perl-Test-Simple-0.80-62.8 [ 70s] [96/159] installing tizen-accelerator-1.0.1-1.14 [ 70s] [97/159] installing perl-IO-Compress-Zlib-2.008-62.8 [ 70s] [98/159] installing perl-Test-Harness-3.12-62.8 [ 70s] [99/159] installing gawk-3.1.5-2.9 [ 70s] [100/159] installing gzip-1.3.14-3.8 [ 70s] [101/159] installing build-2011.01.10a-1.9 [ 70s] [102/159] installing libcurl-7.28.1-3.26 [ 70s] [103/159] installing cpp-4.5.3-2.33 [ 70s] [104/159] installing libslp-db-util-0.1.1-5.6 [ 71s] [105/159] installing util-linux-2.20.2-7.7 [ 71s] warning: group tty does not exist - using root [ 71s] /bin/chown: `root:root': invalid user [ 71s] [106/159] installing libarchive-2.8.3-3.2 [ 71s] [107/159] installing glib2-devel-2.32.3-6.3 [ 71s] [108/159] installing bzip2-libs-x86-arm-1.0.5-9.7 [ 72s] [109/159] installing eglibc-x86-arm-2.13-9.7 [ 73s] [110/159] installing elfutils-libelf-x86-arm-0.152-9.7 [ 73s] [111/159] installing elfutils-libs-x86-arm-0.152-9.7 [ 73s] [112/159] installing gmp-x86-arm-5.0.1-9.7 [ 73s] [113/159] installing libacl-x86-arm-2.2.49-9.7 [ 73s] [114/159] installing libattr-x86-arm-2.4.44-9.7 [ 73s] [115/159] installing libcap-x86-arm-2.21-9.6 [ 74s] [116/159] installing libfile-x86-arm-5.04-9.7 [ 74s] [117/159] installing libgcc-x86-arm-4.5.3-9.7 [ 74s] [118/159] installing liblua-x86-arm-5.1.4-9.7 [ 74s] [119/159] installing mpc-x86-arm-0.9-9.7 [ 75s] [120/159] installing mpfr-x86-arm-3.0.0-9.7 [ 75s] [121/159] installing ncurses-libs-x86-arm-5.7-9.6 [ 75s] [122/159] installing nspr-x86-arm-4.8.7-9.7 [ 75s] [123/159] installing nss-softokn-freebl-x86-arm-3.12.9-9.7 [ 75s] [124/159] installing nss-x86-arm-3.12.9-9.7 [ 76s] [125/159] installing perl-ExtUtils-MakeMaker-6.36-62.8 [ 76s] [126/159] installing popt-x86-arm-1.16-9.7 [ 76s] [127/159] installing sqlite-x86-arm-3.7.13-9.6 [ 76s] [128/159] installing xz-libs-x86-arm-5.0.3-9.7 [ 77s] [129/159] installing zlib-x86-arm-1.2.5-7.6 [ 77s] [130/159] installing libslp-db-util-devel-0.1.1-5.6 [ 77s] [131/159] installing curl-7.28.1-3.26 [ 77s] [132/159] installing cmake-2.8.5-1.3 [ 77s] [133/159] installing gcc-4.5.3-2.33 [ 78s] [134/159] installing perl-CPAN-1.9205-62.8 [ 78s] [135/159] installing bash-x86-arm-4.1-7.7 [ 78s] [136/159] installing fdupes-x86-arm-1.40-9.7 [ 78s] [137/159] installing findutils-x86-arm-4.2.31-7.7 [ 78s] [138/159] installing gawk-x86-arm-3.1.5-7.7 [ 78s] [139/159] installing gzip-x86-arm-1.3.14-9.7 [ 79s] [140/159] installing make-x86-arm-3.81-8.6 [ 79s] [141/159] installing patch-x86-arm-2.6.1.169-7.7 [ 79s] [142/159] installing sed-x86-arm-4.1.5-9.7 [ 79s] /bin/sed.orig-arm already present - skipping. [ 79s] [143/159] installing diffutils-x86-arm-3.0-9.7 [ 79s] /usr/bin/cmp.orig-arm already present - skipping. [ 79s] /usr/bin/diff.orig-arm already present - skipping. [ 79s] /usr/bin/diff3.orig-arm already present - skipping. [ 79s] /usr/bin/sdiff.orig-arm already present - skipping. [ 79s] [144/159] installing autoconf-2.68-1.9 [ 79s] [145/159] installing coreutils-x86-arm-6.9-7.7 [ 81s] [146/159] installing file-x86-arm-5.04-7.7 [ 82s] [147/159] installing tar-x86-arm-1.17-9.6 [ 82s] /bin/tar.orig-arm already present - skipping. [ 82s] [148/159] installing elfutils-x86-arm-0.152-7.8 [ 82s] [149/159] installing gcc-c++-4.5.3-2.33 [ 82s] [150/159] installing rpm-4.9.1-4.12 [ 82s] [151/159] installing automake-1.11.1-3.12 [ 82s] [152/159] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.2 [ 83s] "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " [ 83s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 83s] cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory [ 83s] cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [ 83s] [153/159] installing rpm-libs-4.9.1-4.12 [ 84s] [154/159] installing rpm-libs-x86-arm-4.9.1-10.7 [ 84s] [155/159] installing libtool-2.2.6b-2.15 [ 84s] [156/159] installing cross-armv7l-binutils-accel-armv7l-2.22-1.6 [ 85s] mv: cannot stat `/usr/bin/gprov': No such file or directory [ 85s] [157/159] installing rpm-build-4.9.1-4.12 [ 85s] [158/159] installing rpm-x86-arm-4.9.1-9.7 [ 85s] /bin/rpm.orig-arm already present - skipping. [ 85s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 85s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 85s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 85s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 85s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 85s] [159/159] installing rpm-build-x86-arm-4.9.1-9.7 [ 86s] /usr/bin/rpmbuild [ 86s] /usr/lib/rpm/debugedit [ 86s] now finalizing build dir... [ 86s] /.build/build: line 2680: //etc/passwd: No such file or directory [ 89s] build target is armv7l-tizen-linux [ 89s] ----------------------------------------------------------------- [ 89s] I have the following modifications for librua.spec: [ 89s] 5c5 [ 89s] < Release: 1 [ 89s] --- [ 89s] > Release: 1.3 [ 89s] ----------------------------------------------------------------- [ 89s] ----- building librua.spec (user abuild) [ 89s] ----------------------------------------------------------------- [ 89s] ----------------------------------------------------------------- [ 89s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://w02.vlan200.tizendev.org/Tizen:2.2:Main/standard/78faceb2540d491bd791523269757fef-librua' /home/abuild/rpmbuild/SOURCES/librua.spec [ 89s] Building target platforms: armv7l-tizen-linux [ 89s] Building for target armv7l-tizen-linux [ 89s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.f7DDt4 [ 89s] + umask 022 [ 89s] + cd /home/abuild/rpmbuild/BUILD [ 89s] + LANG=C [ 89s] + export LANG [ 89s] + unset DISPLAY [ 89s] + cd /home/abuild/rpmbuild/BUILD [ 89s] + rm -rf librua-0.1.2 [ 89s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/librua-0.1.2.tar.gz [ 89s] + /bin/tar -xf - [ 89s] + STATUS=0 [ 89s] + '[' 0 -ne 0 ']' [ 89s] + cd librua-0.1.2 [ 89s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 89s] + exit 0 [ 89s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.veyq6Z [ 89s] + umask 022 [ 89s] + cd /home/abuild/rpmbuild/BUILD [ 89s] + cd librua-0.1.2 [ 89s] + LANG=C [ 89s] + export LANG [ 89s] + unset DISPLAY [ 89s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 89s] + export CFLAGS [ 89s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 89s] + export CXXFLAGS [ 89s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 89s] + export FFLAGS [ 89s] + LD_AS_NEEDED=1 [ 89s] + export LD_AS_NEEDED [ 89s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 89s] + export CFLAGS [ 89s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 89s] + export CXXFLAGS [ 89s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 89s] + export FFLAGS [ 89s] + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON . [ 90s] -- The C compiler identification is GNU [ 90s] -- Check for working C compiler: /usr/bin/gcc [ 90s] -- Check for working C compiler: /usr/bin/gcc -- works [ 90s] -- Detecting C compiler ABI info [ 90s] -- Detecting C compiler ABI info - done [ 90s] -- checking for modules 'sqlite3;db-util' [ 91s] -- found sqlite3, version 3.7.9 [ 91s] -- found db-util, version 0.1.0 [ 91s] -- Configuring done [ 91s] -- Generating done [ 91s] CMake Warning: [ 91s] Manually-specified variables were not used by the project: [ 91s] [ 91s] CMAKE_INSTALL_LIBDIR [ 91s] INCLUDE_INSTALL_DIR [ 91s] SHARE_INSTALL_PREFIX [ 91s] SYSCONF_INSTALL_DIR [ 91s] [ 91s] [ 91s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/librua-0.1.2 [ 91s] + make -j4 [ 91s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/librua-0.1.2 -B/home/abuild/rpmbuild/BUILD/librua-0.1.2 --check-build-system CMakeFiles/Makefile.cmake 0 [ 92s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/librua-0.1.2/CMakeFiles /home/abuild/rpmbuild/BUILD/librua-0.1.2/CMakeFiles/progress.marks [ 92s] make -f CMakeFiles/Makefile2 all [ 92s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/librua-0.1.2' [ 92s] make -f CMakeFiles/rua.dir/build.make CMakeFiles/rua.dir/depend [ 92s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/librua-0.1.2' [ 92s] cd /home/abuild/rpmbuild/BUILD/librua-0.1.2 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/librua-0.1.2 /home/abuild/rpmbuild/BUILD/librua-0.1.2 /home/abuild/rpmbuild/BUILD/librua-0.1.2 /home/abuild/rpmbuild/BUILD/librua-0.1.2 /home/abuild/rpmbuild/BUILD/librua-0.1.2/CMakeFiles/rua.dir/DependInfo.cmake --color= [ 92s] Scanning dependencies of target rua [ 92s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/librua-0.1.2' [ 92s] make -f CMakeFiles/rua.dir/build.make CMakeFiles/rua.dir/build [ 92s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/librua-0.1.2' [ 92s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/librua-0.1.2/CMakeFiles 1 [ 92s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/librua-0.1.2/CMakeFiles 2 [ 92s] [100%] [100%] Building C object CMakeFiles/rua.dir/src/rua.c.o [ 92s] /usr/bin/gcc -Drua_EXPORTS -DPREFIX=\"/usr\" -DFACTORYFS=\"\" -DDATAFS=\"\" -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I/usr/include/db-util -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -fvisibility=hidden -fPIC -I/home/abuild/rpmbuild/BUILD/librua-0.1.2/include -o CMakeFiles/rua.dir/src/rua.c.o -c /home/abuild/rpmbuild/BUILD/librua-0.1.2/src/rua.c [ 92s] Building C object CMakeFiles/rua.dir/src/perf-measure.c.o [ 92s] /usr/bin/gcc -Drua_EXPORTS -DPREFIX=\"/usr\" -DFACTORYFS=\"\" -DDATAFS=\"\" -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I/usr/include/db-util -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -fvisibility=hidden -fPIC -I/home/abuild/rpmbuild/BUILD/librua-0.1.2/include -o CMakeFiles/rua.dir/src/perf-measure.c.o -c /home/abuild/rpmbuild/BUILD/librua-0.1.2/src/perf-measure.c [ 92s] /home/abuild/rpmbuild/BUILD/librua-0.1.2/src/rua.c: In function 'rua_add_history': [ 92s] /home/abuild/rpmbuild/BUILD/librua-0.1.2/src/rua.c:188:2: warning: statement with no effect [ 92s] /home/abuild/rpmbuild/BUILD/librua-0.1.2/src/rua.c: In function 'rua_init': [ 92s] /home/abuild/rpmbuild/BUILD/librua-0.1.2/src/rua.c:349:2: warning: statement with no effect [ 92s] /home/abuild/rpmbuild/BUILD/librua-0.1.2/src/rua.c: In function 'rua_fini': [ 92s] /home/abuild/rpmbuild/BUILD/librua-0.1.2/src/rua.c:366:2: warning: statement with no effect [ 92s] Linking C shared library librua.so [ 92s] /usr/bin/cmake -E cmake_link_script CMakeFiles/rua.dir/link.txt --verbose=1 [ 92s] /usr/bin/gcc -fPIC -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I/usr/include/db-util -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -fvisibility=hidden -shared -Wl,-soname,librua.so.0 -o librua.so.0.1.0 CMakeFiles/rua.dir/src/perf-measure.c.o CMakeFiles/rua.dir/src/rua.c.o -lSLP-db-util -lsqlite3 -ldlog -lpthread -lglib-2.0 -licui18n -licuuc -licudata [ 92s] /usr/bin/cmake -E cmake_symlink_library librua.so.0.1.0 librua.so.0 librua.so [ 92s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/librua-0.1.2' [ 92s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/librua-0.1.2/CMakeFiles 1 2 [ 92s] [100%] Built target rua [ 92s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/librua-0.1.2' [ 92s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/librua-0.1.2/CMakeFiles 0 [ 92s] + exit 0 [ 92s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.XKbNP6 [ 92s] + umask 022 [ 92s] + cd /home/abuild/rpmbuild/BUILD [ 92s] + cd librua-0.1.2 [ 92s] + LANG=C [ 92s] + export LANG [ 92s] + unset DISPLAY [ 92s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/librua-0.1.2-1.3.arm [ 92s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/librua-0.1.2-1.3.arm [ 92s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/librua-0.1.2-1.3.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/librua-0.1.2-1.3.arm install [ 92s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/librua-0.1.2 -B/home/abuild/rpmbuild/BUILD/librua-0.1.2 --check-build-system CMakeFiles/Makefile.cmake 0 [ 92s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/librua-0.1.2/CMakeFiles /home/abuild/rpmbuild/BUILD/librua-0.1.2/CMakeFiles/progress.marks [ 92s] /usr/bin/make -f CMakeFiles/Makefile2 all [ 92s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/librua-0.1.2' [ 92s] /usr/bin/make -f CMakeFiles/rua.dir/build.make CMakeFiles/rua.dir/depend [ 92s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/librua-0.1.2' [ 92s] cd /home/abuild/rpmbuild/BUILD/librua-0.1.2 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/librua-0.1.2 /home/abuild/rpmbuild/BUILD/librua-0.1.2 /home/abuild/rpmbuild/BUILD/librua-0.1.2 /home/abuild/rpmbuild/BUILD/librua-0.1.2 /home/abuild/rpmbuild/BUILD/librua-0.1.2/CMakeFiles/rua.dir/DependInfo.cmake --color= [ 92s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/librua-0.1.2' [ 93s] /usr/bin/make -f CMakeFiles/rua.dir/build.make CMakeFiles/rua.dir/build [ 93s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/librua-0.1.2' [ 93s] make[2]: Nothing to be done for `CMakeFiles/rua.dir/build'. [ 93s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/librua-0.1.2' [ 93s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/librua-0.1.2/CMakeFiles 1 2 [ 93s] [100%] Built target rua [ 93s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/librua-0.1.2' [ 93s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/librua-0.1.2/CMakeFiles 0 [ 93s] /usr/bin/make -f CMakeFiles/Makefile2 preinstall [ 93s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/librua-0.1.2' [ 93s] make[1]: Nothing to be done for `preinstall'. [ 93s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/librua-0.1.2' [ 93s] Install the project... [ 93s] /usr/bin/cmake -P cmake_install.cmake [ 93s] -- Install configuration: "" [ 93s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/librua-0.1.2-1.3.arm/usr/lib/librua.so.0.1.0 [ 93s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/librua-0.1.2-1.3.arm/usr/lib/librua.so.0 [ 93s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/librua-0.1.2-1.3.arm/usr/lib/librua.so [ 93s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/librua-0.1.2-1.3.arm/usr/lib/pkgconfig/rua.pc [ 93s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/librua-0.1.2-1.3.arm/usr/include/rua/rua.h [ 93s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/librua-0.1.2-1.3.arm/opt/share/rua_db.sql [ 93s] + rm -f /home/abuild/rpmbuild/BUILDROOT/librua-0.1.2-1.3.arm/usr/share/info/dir [ 93s] + find /home/abuild/rpmbuild/BUILDROOT/librua-0.1.2-1.3.arm -regex '.*\.la$' [ 93s] + xargs rm -f -- [ 93s] + find /home/abuild/rpmbuild/BUILDROOT/librua-0.1.2-1.3.arm -regex '.*\.a$' [ 93s] + xargs rm -f -- [ 93s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/librua-0.1.2-1.3.arm/usr/share/license [ 93s] + install LICENSE /home/abuild/rpmbuild/BUILDROOT/librua-0.1.2-1.3.arm/usr/share/license/librua [ 93s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/librua-0.1.2 [ 93s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/librua-0.1.2-1.3.arm/usr/lib/librua.so.0.1.0 [ 93s] symlinked /usr/lib/debug/usr/lib/librua.so.0.1.0.debug to /usr/lib/debug/usr/lib/librua.so.0.debug [ 93s] symlinked /usr/lib/debug/usr/lib/librua.so.0.1.0.debug to /usr/lib/debug/usr/lib/librua.so.debug [ 93s] 29 blocks [ 93s] + /usr/lib/rpm/check-buildroot [ 93s] + /usr/lib/rpm//brp-compress [ 93s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 93s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 93s] + /usr/lib/rpm/brp-python-bytecompile [ 93s] + /usr/lib/rpm/brp-python-hardlink [ 93s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/librua-0.1.2-1.3.arm [ 93s] Processing files: librua-0.1.2-1.3.armv7l [ 93s] Aptk: PG1hbmlmZXN0PgoJPGRlZmluZT4KCQk8ZG9tYWluIG5hbWU9InJ1YSIvPgoJCTxw [ 93s] cm92aWRlPgoJCQk8bGFiZWwgbmFtZT0icnVhOjpkYiIvPgoJCTwvcHJvdmlkZT4K [ 93s] CTwvZGVmaW5lPgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJydWEiLz4KCTwv [ 93s] cmVxdWVzdD4KCTxhc3NpZ24+CgkJPGZpbGVzeXN0ZW0gcGF0aD0iL3Vzci9saWIv [ 93s] bGlicnVhLnNvLjAiIGxhYmVsPSJfIi8+CgkJPGZpbGVzeXN0ZW0gcGF0aD0iL3Vz [ 93s] ci9saWIvbGlicnVhLnNvLjAuMS4wIiBsYWJlbD0iXyIvPgoJPC9hc3NpZ24+Cjwv [ 93s] bWFuaWZlc3Q+Cg== [ 93s] [ 93s] Provides: config(librua) = 0.1.2-1.3 librua.so.0 [ 93s] Requires(interp): /bin/sh /sbin/ldconfig [ 93s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 93s] Requires(post): /bin/sh /sbin/ldconfig /usr/bin/sqlite3 [ 93s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 93s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libSLP-db-util.so.0 libc.so.6 libc.so.6(GLIBC_2.4) libdlog.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libglib-2.0.so.0 libicudata.so.48 libicui18n.so.48 libicuuc.so.48 libpthread.so.0 libsqlite3.so.0 [ 93s] Processing files: librua-devel-0.1.2-1.3.armv7l [ 94s] Provides: pkgconfig(rua) = 0.1.0 [ 94s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 94s] Requires: /usr/bin/pkg-config librua.so.0 pkgconfig(sqlite3) [ 94s] Processing files: librua-debuginfo-0.1.2-1.3.armv7l [ 94s] Processing files: librua-debugsource-0.1.2-1.3.armv7l [ 94s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/librua-0.1.2-1.3.arm [ 94s] Wrote: /home/abuild/rpmbuild/SRPMS/librua-0.1.2-1.3.src.rpm [ 94s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/librua-0.1.2-1.3.armv7l.rpm [ 94s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/librua-devel-0.1.2-1.3.armv7l.rpm [ 94s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/librua-debuginfo-0.1.2-1.3.armv7l.rpm [ 94s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/librua-debugsource-0.1.2-1.3.armv7l.rpm [ 94s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.HFi2Oi [ 94s] + umask 022 [ 94s] + cd /home/abuild/rpmbuild/BUILD [ 94s] + cd librua-0.1.2 [ 94s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/librua-0.1.2-1.3.arm [ 94s] + exit 0 [ 94s] ... checking for files with abuild user/group [ 94s] ... creating baselibs [ 95s] ... comparing built packages with the former built [ 95s] /usr/lib/build/rpm-check.sh [ 95s] compare /.build.oldpackages/librua-0.1.2-1.2.src.rpm /home/abuild/rpmbuild/SRPMS/librua-0.1.2-1.3.src.rpm [ 95s] compare /.build.oldpackages/librua-0.1.2-1.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/librua-0.1.2-1.3.armv7l.rpm [ 95s] --- /tmp/tmp.lR1MqUh89G 2013-11-07 14:13:13.553768984 +0000 [ 95s] +++ /tmp/tmp.Kge240idNp 2013-11-07 14:13:13.569768984 +0000 [ 95s] @@ -1,7 +1,7 @@ [ 95s] librua 0.1.2 (none) [ 95s] Recently used application [ 95s] Recently used application library [ 95s] - tizen Tizen:2.2:Main obs://w08.vlan200.tizendev.org/Tizen:2.2:Main/standard/78faceb2540d491bd791523269757fef-librua Apache-2.0 Apache-2.0 [ 95s] + tizen Tizen:2.2:Main obs://w02.vlan200.tizendev.org/Tizen:2.2:Main/standard/78faceb2540d491bd791523269757fef-librua Apache-2.0 Apache-2.0 [ 95s] Application Framework/Libraries (none) (none) (none) (none) [ 95s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 95s] cpio gzip 9 [ 95s] RPM meta information is different [ 95s] compare /.build.oldpackages/librua-debuginfo-0.1.2-1.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/librua-debuginfo-0.1.2-1.3.armv7l.rpm [ 95s] --- /tmp/tmp.968zMUGpfl 2013-11-07 14:13:13.697768985 +0000 [ 95s] +++ /tmp/tmp.mEO2fYZxYy 2013-11-07 14:13:13.709768986 +0000 [ 95s] @@ -3,7 +3,7 @@ [ 95s] This package provides debug information for package librua. [ 95s] Debug information is useful when developing applications that use this [ 95s] package or when debugging this package. [ 95s] - tizen Tizen:2.2:Main obs://w08.vlan200.tizendev.org/Tizen:2.2:Main/standard/78faceb2540d491bd791523269757fef-librua Apache-2.0 Apache-2.0 [ 95s] + tizen Tizen:2.2:Main obs://w02.vlan200.tizendev.org/Tizen:2.2:Main/standard/78faceb2540d491bd791523269757fef-librua Apache-2.0 Apache-2.0 [ 95s] Development/Debug (none) (none) (none) (none) [ 95s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 95s] cpio gzip 9 [ 95s] RPM meta information is different [ 95s] compare /.build.oldpackages/librua-debugsource-0.1.2-1.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/librua-debugsource-0.1.2-1.3.armv7l.rpm [ 95s] --- /tmp/tmp.mypuv3YYo8 2013-11-07 14:13:13.801768987 +0000 [ 95s] +++ /tmp/tmp.6PszChYgty 2013-11-07 14:13:13.813768987 +0000 [ 95s] @@ -3,7 +3,7 @@ [ 95s] This package provides debug sources for package librua. [ 95s] Debug sources are useful when developing applications that use this [ 95s] package or when debugging this package. [ 95s] - tizen Tizen:2.2:Main obs://w08.vlan200.tizendev.org/Tizen:2.2:Main/standard/78faceb2540d491bd791523269757fef-librua Apache-2.0 Apache-2.0 [ 95s] + tizen Tizen:2.2:Main obs://w02.vlan200.tizendev.org/Tizen:2.2:Main/standard/78faceb2540d491bd791523269757fef-librua Apache-2.0 Apache-2.0 [ 95s] Development/Debug (none) (none) (none) (none) [ 95s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 95s] cpio gzip 9 [ 95s] RPM meta information is different [ 95s] compare /.build.oldpackages/librua-devel-0.1.2-1.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/librua-devel-0.1.2-1.3.armv7l.rpm [ 95s] --- /tmp/tmp.s5NwCEOkcp 2013-11-07 14:13:13.933768989 +0000 [ 95s] +++ /tmp/tmp.V2biYFMier 2013-11-07 14:13:13.941768989 +0000 [ 95s] @@ -1,7 +1,7 @@ [ 95s] librua-devel 0.1.2 (none) [ 95s] Recently used application (devel) [ 95s] Recently used application library (devel) [ 95s] - tizen Tizen:2.2:Main obs://w08.vlan200.tizendev.org/Tizen:2.2:Main/standard/78faceb2540d491bd791523269757fef-librua Apache-2.0 Apache-2.0 [ 95s] + tizen Tizen:2.2:Main obs://w02.vlan200.tizendev.org/Tizen:2.2:Main/standard/78faceb2540d491bd791523269757fef-librua Apache-2.0 Apache-2.0 [ 95s] Development/Libraries (none) (none) (none) (none) [ 95s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 95s] cpio gzip 9 [ 95s] RPM meta information is different [ 95s] ... saving built statistics [ 95s] ... saving built packages [ 96s] /home/abuild/rpmbuild/RPMS/armv7l/librua-0.1.2-1.3.armv7l.rpm [ 96s] /home/abuild/rpmbuild/RPMS/armv7l/librua-debuginfo-0.1.2-1.3.armv7l.rpm [ 96s] /home/abuild/rpmbuild/RPMS/armv7l/librua-debugsource-0.1.2-1.3.armv7l.rpm [ 96s] /home/abuild/rpmbuild/RPMS/armv7l/librua-devel-0.1.2-1.3.armv7l.rpm [ 96s] /home/abuild/rpmbuild/SRPMS/librua-0.1.2-1.3.src.rpm [ 96s] /home/abuild/rpmbuild/OTHER/_statistics [ 96s] [ 96s] w02 finished "build librua.spec" at Thu Nov 7 14:13:14 UTC 2013. [ 96s] [ 101s] [ 90.179058] SysRq : Power Off [ 101s] [ 90.187106] Power down. [ 101s] build: extracting built packages... [ 101s] librua-0.1.2-1.3.armv7l.rpm [ 101s] librua-debuginfo-0.1.2-1.3.armv7l.rpm [ 101s] librua-debugsource-0.1.2-1.3.armv7l.rpm [ 101s] librua-devel-0.1.2-1.3.armv7l.rpm [ 101s] librua-0.1.2-1.3.src.rpm [ 101s] _statistics