[ 0s] Using BUILD_ROOT=/srv/build/root_7/.mount [ 0s] Using BUILD_ARCH=armv7el [ 0s] Doing kvm build in /srv/build/root_7/root [ 0s] [ 0s] [ 0s] w10 started "build pulseaudio-modules-mfld-blackbay.spec" at Thu Nov 7 14:16:47 UTC 2013. [ 0s] [ 0s] Building pulseaudio-modules-mfld-blackbay for project 'Tizen:2.2:Main' repository 'standard' arch 'armv7el' srcmd5 '3c65e9d3fcecc10b6da46a61570d6f06' [ 0s] [ 0s] processing specfile /srv/build/root_7/.build-srcdir/pulseaudio-modules-mfld-blackbay.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_7/.build-srcdir/pulseaudio-modules-mfld-blackbay.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/7/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_7/.build.rpmlist /srv/build/root_7/.build-srcdir/pulseaudio-modules-mfld-blackbay.spec build rpmlint-Factory ... [ 0s] hostname: Name or service not known [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc-common -> eglibc [ 0s] cycle: libgcc -> eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: libgcc -> eglibc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm -> rpm-libs [ 0s] [1/56] preinstalling libgcc... [ 0s] [2/56] preinstalling setup... [ 0s] [3/56] preinstalling filesystem... [ 0s] [4/56] preinstalling eglibc... [ 0s] [5/56] preinstalling eglibc-common... [ 1s] [6/56] preinstalling bash... [ 1s] [7/56] preinstalling bzip2-libs... [ 1s] [8/56] preinstalling diffutils... [ 1s] [9/56] preinstalling elfutils-libelf... [ 1s] [10/56] preinstalling libattr... [ 1s] [11/56] preinstalling liblua... [ 1s] [12/56] preinstalling libstdc++... [ 1s] [13/56] preinstalling ncurses-libs... [ 1s] [14/56] preinstalling nspr... [ 1s] [15/56] preinstalling nss-softokn-freebl... [ 1s] [16/56] preinstalling popt... [ 1s] [17/56] preinstalling readline... [ 1s] [18/56] preinstalling sed... [ 1s] [19/56] preinstalling sqlite... [ 1s] [20/56] preinstalling xz-libs... [ 1s] [21/56] preinstalling zlib... [ 1s] [22/56] preinstalling qemu.x86_64... [ 1s] [23/56] preinstalling libcap... [ 1s] [24/56] preinstalling libacl... [ 1s] [25/56] preinstalling libfile... [ 1s] [26/56] preinstalling bzip2... [ 2s] [27/56] preinstalling nss... [ 2s] [28/56] preinstalling tar... [ 2s] [29/56] preinstalling coreutils... [ 2s] [30/56] preinstalling file... [ 2s] [31/56] preinstalling rpm... [ 2s] [32/56] preinstalling tizen-accelerator... [ 2s] [33/56] preinstalling rpm-libs... [ 2s] [34/56] preinstalling gmp-x86-arm... [ 2s] [35/56] preinstalling mpc-x86-arm... [ 2s] [36/56] preinstalling mpfr-x86-arm... [ 2s] [37/56] preinstalling bzip2-libs-x86-arm... [ 2s] [38/56] preinstalling eglibc-x86-arm... [ 2s] [39/56] preinstalling elfutils-libelf-x86-arm... [ 2s] [40/56] preinstalling libacl-x86-arm... [ 2s] [41/56] preinstalling libattr-x86-arm... [ 2s] [42/56] preinstalling libcap-x86-arm... [ 2s] [43/56] preinstalling libfile-x86-arm... [ 2s] [44/56] preinstalling libgcc-x86-arm... [ 2s] [45/56] preinstalling liblua-x86-arm... [ 2s] [46/56] preinstalling ncurses-libs-x86-arm... [ 2s] [47/56] preinstalling nspr-x86-arm... [ 2s] [48/56] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [49/56] preinstalling nss-x86-arm... [ 2s] [50/56] preinstalling popt-x86-arm... [ 2s] [51/56] preinstalling rpm-libs-x86-arm... [ 2s] [52/56] preinstalling sqlite-x86-arm... [ 2s] [53/56] preinstalling xz-libs-x86-arm... [ 2s] [54/56] preinstalling zlib-x86-arm... [ 2s] [55/56] preinstalling bash-x86-arm... [ 2s] [56/56] preinstalling rpm-x86-arm... [ 2s] [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl-libs -> perl [ 3s] [1/8] preinstalling e2fsprogs-libs... [ 3s] [2/8] preinstalling libpcre... [ 3s] [3/8] preinstalling libuuid... [ 3s] [4/8] preinstalling grep... [ 3s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 3s] copying packages... [ 4s] reordering...cycle: bash -> eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> bash [ 4s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 4s] breaking dependency eglibc-common -> coreutils [ 4s] cycle: eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> findutils [ 4s] breaking dependency eglibc-common -> findutils [ 4s] cycle: eglibc -> eglibc-common -> grep [ 4s] breaking dependency grep -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 4s] breaking dependency grep -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 4s] breaking dependency libpcre -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 4s] breaking dependency libpcre -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 4s] breaking dependency libstdc++ -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 4s] breaking dependency eglibc-common -> grep [ 4s] cycle: eglibc -> eglibc-common -> libgcc [ 4s] breaking dependency eglibc -> eglibc-common [ 4s] cycle: eglibc -> libgcc [ 4s] breaking dependency libgcc -> eglibc [ 4s] cycle: filesystem -> setup [ 4s] breaking dependency setup -> filesystem [ 4s] cycle: ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses [ 4s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses-base [ 4s] cycle: perl -> perl-libs [ 4s] breaking dependency perl -> perl-libs [ 4s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 4s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl -> perl-IO-Compress-Zlib [ 4s] breaking dependency perl -> perl-IO-Compress-Zlib [ 4s] cycle: perl -> perl-IO-Compress-Base [ 4s] breaking dependency perl -> perl-IO-Compress-Base [ 4s] cycle: perl -> perl-Module-Pluggable [ 4s] breaking dependency perl -> perl-Module-Pluggable [ 4s] cycle: perl -> perl-Pod-Simple [ 4s] breaking dependency perl -> perl-Pod-Simple [ 4s] cycle: dbus-libs -> dbus [ 4s] breaking dependency dbus -> dbus-libs [ 4s] cycle: systemd -> libudev -> udev [ 4s] breaking dependency systemd -> libudev [ 4s] cycle: pulseaudio-libs -> pulseaudio [ 4s] breaking dependency pulseaudio -> pulseaudio-libs [ 4s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 4s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 4s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 4s] cycle: nss -> nss-sysinit [ 4s] breaking dependency nss -> nss-sysinit [ 4s] cycle: perl-CPAN -> perl-Test-Harness [ 4s] breaking dependency perl-Test-Harness -> perl-CPAN [ 4s] cycle: rpm-libs -> rpm [ 4s] breaking dependency rpm -> rpm-libs [ 4s] done [ 5s] booting kvm ... [ 5s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8192 -drive file=/srv/build/root_7/root,if=virtio,cache=none -drive file=/srv/build/root_7/root,if=ide,index=0,cache=none -drive file=/srv/build/root_7/swap,if=virtio,cache=none -smp 4 [ 6s] [ 0.000000] tsc: Fast TSC calibration failed [ 7s] doing fast boot [ 7s] Creating device nodes with udev [ 7s] Waiting for device /dev/vda to appear: ok [ 7s] fsck from util-linux 2.21.2 [ 7s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 7s] /dev/vda: clean, 6880/2097152 files, 241310/8388608 blocks [ 7s] fsck succeeded. Mounting root device read-write. [ 7s] Mounting root /dev/vda [ 7s] mount -o rw -t ext4 /dev/vda /root [ 7s] replacing /etc/mtab with symlink to /proc/self/mounts [ 8s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 8s] 2nd stage started in virtual machine [ 8s] machine type: armv7l [ 8s] switching personality to 8... [ 8s] 2nd stage started in virtual machine [ 8s] machine type: armv7l [ 9s] swapon on /dev/vdb [ 9s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 9s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 9s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 9s] logging output to //.build.log... [ 9s] processing specfile /.build-srcdir/pulseaudio-modules-mfld-blackbay.spec ... [ 9s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/pulseaudio-modules-mfld-blackbay.spec build rpmlint-Factory ... [ 10s] running rpm-x86-arm postinstall script [ 10s] /bin/rpm [ 10s] /usr/bin/rpm2cpio [ 10s] /usr/bin/rpmdb [ 10s] /usr/bin/rpmquery [ 10s] /usr/bin/rpmsign [ 10s] /usr/bin/rpmverify [ 10s] running rpm-libs-x86-arm postinstall script [ 10s] running tizen-accelerator postinstall script [ 10s] running bash-x86-arm postinstall script [ 10s] initializing rpm db... [ 15s] [1/175] installing kernel-headers-3.0.15-1.10 [ 15s] [2/175] installing libX11-common-1.5.0-3.4 [ 15s] [3/175] installing tizen-release-2.2.0-1.9 [ 16s] [4/175] installing tzdata-2011h-1.10 [ 16s] [5/175] installing libgcc-4.5.3-2.33 [ 16s] [6/175] installing setup-0.1-2.6 [ 16s] [7/175] installing filesystem-0.1-1.9 [ 16s] warning: group lock does not exist - using root [ 16s] warning: group mail does not exist - using root [ 16s] [8/175] installing eglibc-2.13-2.18 [ 17s] [9/175] installing libstdc++-4.5.3-2.33 [ 17s] [10/175] installing eglibc-common-2.13-2.18 [ 19s] /var/tmp/rpm-tmp.x5nRL0: line 2: /usr/bin/xargs: No such file or directory [ 19s] [11/175] installing libstdc++-devel-4.5.3-2.33 [ 19s] [12/175] installing bash-4.1-4.9 [ 19s] [13/175] installing bzip2-libs-1.0.5-5.12 [ 19s] [14/175] installing c-ares-1.7.4-3.22 [ 20s] [15/175] installing cpio-2.8-4.8 [ 20s] [16/175] installing diffutils-3.0-4.8 [ 20s] [17/175] installing e2fsprogs-libs-1.41.9-3.8 [ 20s] [18/175] installing elfutils-libelf-0.152-2.16 [ 20s] [19/175] installing expat-2.0.1-8.12 [ 20s] [20/175] installing fdupes-1.40-42.10 [ 20s] [21/175] installing findutils-4.2.31-2.8 [ 20s] [22/175] installing gdbm-1.8.3-2.33 [ 20s] [23/175] installing kmod-5-5.1 [ 21s] [24/175] installing libXau-1.0.7-1.8 [ 21s] [25/175] installing libasound-1.0.24.1-4.2 [ 21s] [26/175] installing libattr-2.4.44-8.12 [ 21s] [27/175] installing libffi-3.0.9-101.1 [ 21s] [28/175] installing libgomp-4.5.3-2.33 [ 21s] [29/175] installing libidn-1.15-7.29 [ 21s] [30/175] installing liblua-5.1.4-7.7 [ 21s] [31/175] installing libtool-ltdl-2.2.6b-2.15 [ 21s] [32/175] installing libunwind-1.1-4.2 [ 21s] [33/175] installing libuuid-2.20.2-7.7 [ 22s] [34/175] installing lzo-2.03-2.18 [ 22s] [35/175] installing m4-1.4.14-1.9 [ 22s] [36/175] installing make-3.81-1.12 [ 22s] [37/175] installing net-tools-1.60-88.9 [ 22s] [38/175] installing nspr-4.8.7-1.17 [ 22s] [39/175] installing nss-softokn-freebl-3.12.9-3.28 [ 22s] [40/175] installing patch-2.6.1.169-1.9 [ 22s] [41/175] installing pkgconfig-0.25-3.11 [ 22s] [42/175] installing popt-1.16-4.11 [ 22s] [43/175] installing readline-5.2-14.7 [ 23s] [44/175] installing sed-4.1.5-3.8 [ 23s] [45/175] installing smack-1.0slp2+s12-1.11 [ 23s] [46/175] installing speex-1.2rc1-4.2 [ 23s] [47/175] installing sqlite-3.7.13-1.12 [ 23s] [48/175] installing xz-libs-5.0.3-2.17 [ 23s] [49/175] installing zlib-1.2.5-3.18 [ 23s] [50/175] installing gmp-5.0.1-2.16 [ 23s] [51/175] installing libpcre-7.7-4.44 [ 23s] [52/175] installing ncurses-libs-5.7-4.11 [ 23s] [53/175] installing build-compare-2009.10.14-26.14 [ 24s] [54/175] installing qemu.x86_64-1.2-2.10 [ 26s] [55/175] installing eglibc-headers-2.13-2.18 [ 26s] [56/175] installing libcap-2.21-2.10 [ 26s] [57/175] installing libpci3-3.0.0-2.2 [ 26s] [58/175] installing libtool-ltdl-devel-2.2.6b-2.15 [ 26s] [59/175] installing unzip-6.0-10.16 [ 26s] [60/175] installing zlib-devel-1.2.5-3.18 [ 26s] [61/175] installing grep-2.5.1a-63.9 [ 26s] [62/175] installing libacl-2.2.49-3.12 [ 26s] [63/175] installing libfile-5.04-2.11 [ 27s] [64/175] installing libsndfile-1.0.25-2.2 [ 27s] [65/175] installing libxcb-1.8.1-1.7 [ 27s] [66/175] installing lzo-minilzo-2.03-2.18 [ 27s] [67/175] installing mpfr-3.0.0-1.16 [ 27s] [68/175] installing ncurses-5.7-4.11 [ 27s] [69/175] installing binutils-2.22-1.12 [ 27s] [70/175] installing bzip2-1.0.5-5.12 [ 27s] [71/175] installing glib2-2.32.3-6.3 [ 28s] [72/175] installing libblkid-2.20.2-7.7 [ 28s] [73/175] installing smack-utils-1.0slp2+s12-1.11 [ 28s] [74/175] installing xz-5.0.3-2.17 [ 28s] [75/175] installing elfutils-libs-0.152-2.16 [ 28s] [76/175] installing nss-3.12.9-3.28 [ 28s] [77/175] installing perl-5.12.1-62.8 [ 30s] [78/175] installing ncurses-base-5.7-4.11 [ 30s] [79/175] installing perl-HTML-Tagset-3.20-8.3 [ 30s] [80/175] installing perl-IO-Compress-Base-2.008-62.8 [ 30s] [81/175] installing perl-Module-Pluggable-3.60-62.8 [ 30s] [82/175] installing perl-Pod-Escapes-1.04-62.8 [ 30s] [83/175] installing perl-TimeDate-1.20-1.3 [ 30s] [84/175] installing eglibc-devel-2.13-2.18 [ 30s] [85/175] installing lzo-devel-2.03-2.18 [ 30s] [86/175] installing pciutils-3.0.0-2.2 [ 30s] [87/175] installing perl-Compress-Raw-Zlib-2.008-62.8 [ 31s] [88/175] installing perl-devel-5.12.1-62.8 [ 31s] [89/175] installing perl-libs-5.12.1-62.8 [ 31s] [90/175] installing tar-1.17-5.11 [ 31s] [91/175] installing coreutils-6.9-9.12 [ 31s] [92/175] installing file-5.04-2.11 [ 31s] [93/175] installing libX11-1.5.0-3.4 [ 31s] [94/175] installing libdlog-0.4.1-17.4 [ 32s] chown: `root:app_logging': invalid user [ 32s] [95/175] installing libmount-2.20.2-7.7 [ 32s] [96/175] installing mpc-0.9-1.16 [ 32s] [97/175] installing openssl-1.0.1c-2.26 [ 32s] [98/175] installing xz-lzma-compat-5.0.3-2.17 [ 32s] [99/175] installing elfutils-0.152-2.16 [ 32s] [100/175] installing nss-sysinit-3.12.9-3.28 [ 32s] [101/175] installing perl-ExtUtils-ParseXS-2.18-62.8 [ 32s] [102/175] installing perl-Pod-Simple-3.07-62.8 [ 33s] [103/175] installing perl-Test-Simple-0.80-62.8 [ 33s] [104/175] installing tizen-accelerator-1.0.1-1.14 [ 33s] [105/175] installing perl-IO-Compress-Zlib-2.008-62.8 [ 33s] [106/175] installing perl-Test-Harness-3.12-62.8 [ 33s] [107/175] installing gawk-3.1.5-2.9 [ 33s] [108/175] installing gzip-1.3.14-3.8 [ 33s] [109/175] installing pam-1.1.5-3.6 [ 33s] [110/175] installing build-2011.01.10a-1.9 [ 34s] [111/175] installing libcurl-7.28.1-3.26 [ 34s] [112/175] installing sys-assert-0.3.3-5.4 [ 34s] chown: `root:crash': invalid user [ 34s] chown: `root:crash': invalid user [ 34s] [113/175] installing cpp-4.5.3-2.33 [ 34s] [114/175] installing dbus-1.6.4-7.1 [ 34s] warning: group dbus does not exist - using root [ 34s] [115/175] installing util-linux-2.20.2-7.7 [ 35s] warning: group tty does not exist - using root [ 35s] /bin/chown: `root:root': invalid user [ 35s] [116/175] installing bzip2-libs-x86-arm-1.0.5-9.7 [ 35s] [117/175] installing dbus-libs-1.6.4-7.1 [ 35s] [118/175] installing eglibc-x86-arm-2.13-9.7 [ 35s] [119/175] installing elfutils-libelf-x86-arm-0.152-9.7 [ 36s] [120/175] installing elfutils-libs-x86-arm-0.152-9.7 [ 36s] [121/175] installing gmp-x86-arm-5.0.1-9.7 [ 36s] [122/175] installing libacl-x86-arm-2.2.49-9.7 [ 36s] [123/175] installing libattr-x86-arm-2.4.44-9.7 [ 36s] [124/175] installing libcap-x86-arm-2.21-9.6 [ 36s] [125/175] installing libfile-x86-arm-5.04-9.7 [ 37s] [126/175] installing libgcc-x86-arm-4.5.3-9.7 [ 37s] [127/175] installing liblua-x86-arm-5.1.4-9.7 [ 37s] [128/175] installing mpc-x86-arm-0.9-9.7 [ 37s] [129/175] installing mpfr-x86-arm-3.0.0-9.7 [ 37s] [130/175] installing ncurses-libs-x86-arm-5.7-9.6 [ 38s] [131/175] installing nspr-x86-arm-4.8.7-9.7 [ 38s] [132/175] installing nss-softokn-freebl-x86-arm-3.12.9-9.7 [ 38s] [133/175] installing nss-x86-arm-3.12.9-9.7 [ 38s] [134/175] installing perl-ExtUtils-MakeMaker-6.36-62.8 [ 38s] [135/175] installing popt-x86-arm-1.16-9.7 [ 39s] [136/175] installing sqlite-x86-arm-3.7.13-9.6 [ 39s] [137/175] installing xz-libs-x86-arm-5.0.3-9.7 [ 39s] [138/175] installing zlib-x86-arm-1.2.5-7.6 [ 39s] [139/175] installing curl-7.28.1-3.26 [ 39s] [140/175] installing gcc-4.5.3-2.33 [ 39s] [141/175] installing perl-CPAN-1.9205-62.8 [ 40s] [142/175] installing bash-x86-arm-4.1-7.7 [ 40s] [143/175] installing fdupes-x86-arm-1.40-9.7 [ 40s] [144/175] installing findutils-x86-arm-4.2.31-7.7 [ 40s] [145/175] installing gawk-x86-arm-3.1.5-7.7 [ 40s] [146/175] installing gzip-x86-arm-1.3.14-9.7 [ 40s] [147/175] installing make-x86-arm-3.81-8.6 [ 41s] [148/175] installing patch-x86-arm-2.6.1.169-7.7 [ 41s] [149/175] installing sed-x86-arm-4.1.5-9.7 [ 41s] /bin/sed.orig-arm already present - skipping. [ 41s] [150/175] installing diffutils-x86-arm-3.0-9.7 [ 41s] /usr/bin/cmp.orig-arm already present - skipping. [ 41s] /usr/bin/diff.orig-arm already present - skipping. [ 41s] /usr/bin/diff3.orig-arm already present - skipping. [ 41s] /usr/bin/sdiff.orig-arm already present - skipping. [ 41s] [151/175] installing autoconf-2.68-1.9 [ 41s] [152/175] installing coreutils-x86-arm-6.9-7.7 [ 44s] [153/175] installing file-x86-arm-5.04-7.7 [ 44s] [154/175] installing tar-x86-arm-1.17-9.6 [ 44s] /bin/tar.orig-arm already present - skipping. [ 44s] [155/175] installing bluez-4.101_23-25.2 [ 44s] [156/175] installing elfutils-x86-arm-0.152-7.8 [ 44s] [157/175] installing systemd-43-3.3 [ 45s] [158/175] installing gcc-c++-4.5.3-2.33 [ 45s] [159/175] installing rpm-4.9.1-4.12 [ 45s] [160/175] installing automake-1.11.1-3.12 [ 45s] [161/175] installing vconf-0.2.51-1.4 [ 45s] Failed to get D-Bus connection: No connection to service manager. [ 45s] warning: %post(vconf-0.2.51-1.4.armv7l) scriptlet failed, exit status 1 [ 46s] [162/175] installing udev-182-7.4 [ 46s] Failed to get D-Bus connection: No connection to service manager. [ 46s] Failed to get D-Bus connection: No connection to service manager. [ 46s] Failed to get D-Bus connection: No connection to service manager. [ 46s] Failed to get D-Bus connection: No connection to service manager. [ 46s] [163/175] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.2 [ 47s] "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " [ 47s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 47s] cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory [ 47s] cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [ 47s] [164/175] installing rpm-libs-4.9.1-4.12 [ 47s] [165/175] installing libudev-182-7.4 [ 47s] [166/175] installing rpm-libs-x86-arm-4.9.1-10.7 [ 47s] [167/175] installing libtool-2.2.6b-2.15 [ 47s] [168/175] installing cross-armv7l-binutils-accel-armv7l-2.22-1.6 [ 48s] mv: cannot stat `/usr/bin/gprov': No such file or directory [ 48s] [169/175] installing rpm-build-4.9.1-4.12 [ 48s] [170/175] installing rpm-x86-arm-4.9.1-9.7 [ 48s] /bin/rpm.orig-arm already present - skipping. [ 48s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 48s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 48s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 48s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 48s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 48s] [171/175] installing pulseaudio-0.9.23-35.3 [ 48s] Failed to get D-Bus connection: No connection to service manager. [ 48s] Failed to get D-Bus connection: No connection to service manager. [ 48s] warning: %post(pulseaudio-0.9.23-35.3.armv7l) scriptlet failed, exit status 1 [ 48s] [172/175] installing rpm-build-x86-arm-4.9.1-9.7 [ 48s] /usr/bin/rpmbuild [ 48s] /usr/lib/rpm/debugedit [ 48s] [173/175] installing pulseaudio-libs-0.9.23-35.3 [ 49s] [174/175] installing pulseaudio-libs-devel-0.9.23-35.3 [ 49s] [175/175] installing pulseaudio-module-devel-0.9.23-35.3 [ 49s] now finalizing build dir... [ 49s] /.build/build: line 2680: //etc/passwd: No such file or directory [ 52s] build target is armv7l-tizen-linux [ 52s] ----------------------------------------------------------------- [ 52s] I have the following modifications for pulseaudio-modules-mfld-blackbay.spec: [ 52s] 6c6 [ 52s] < Release: 1 [ 52s] --- [ 52s] > Release: 1.5 [ 52s] ----------------------------------------------------------------- [ 52s] ----- building pulseaudio-modules-mfld-blackbay.spec (user abuild) [ 52s] ----------------------------------------------------------------- [ 52s] ----------------------------------------------------------------- [ 52s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://w10.vlan200.tizendev.org/Tizen:2.2:Main/standard/3c65e9d3fcecc10b6da46a61570d6f06-pulseaudio-modules-mfld-blackbay' /home/abuild/rpmbuild/SOURCES/pulseaudio-modules-mfld-blackbay.spec [ 52s] Building target platforms: armv7l-tizen-linux [ 52s] Building for target armv7l-tizen-linux [ 52s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.jYVNK4 [ 52s] + umask 022 [ 52s] + cd /home/abuild/rpmbuild/BUILD [ 52s] + LANG=C [ 52s] + export LANG [ 52s] + unset DISPLAY [ 52s] + cd /home/abuild/rpmbuild/BUILD [ 52s] + rm -rf pulseaudio-modules-mfld-blackbay-0.1 [ 52s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/pulseaudio-modules-mfld-blackbay-0.1.tar.gz [ 52s] + /bin/tar -xf - [ 52s] + STATUS=0 [ 52s] + '[' 0 -ne 0 ']' [ 52s] + cd pulseaudio-modules-mfld-blackbay-0.1 [ 52s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 52s] + exit 0 [ 52s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.GVO1nY [ 52s] + umask 022 [ 52s] + cd /home/abuild/rpmbuild/BUILD [ 52s] + cd pulseaudio-modules-mfld-blackbay-0.1 [ 52s] + LANG=C [ 52s] + export LANG [ 52s] + unset DISPLAY [ 52s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 52s] + export CFLAGS [ 52s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 52s] + export CXXFLAGS [ 52s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 52s] + export FFLAGS [ 52s] + LD_AS_NEEDED=1 [ 52s] + export LD_AS_NEEDED [ 52s] + ./autogen.sh [ 66s] configure.ac:55: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body [ 66s] ../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is expanded from... [ 66s] configure.ac:55: the top level [ 67s] libtoolize: putting auxiliary files in `.'. [ 67s] libtoolize: copying file `./ltmain.sh' [ 67s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 67s] libtoolize: copying file `m4/libtool.m4' [ 67s] libtoolize: copying file `m4/ltoptions.m4' [ 67s] libtoolize: copying file `m4/ltsugar.m4' [ 67s] libtoolize: copying file `m4/ltversion.m4' [ 67s] libtoolize: copying file `m4/lt~obsolete.m4' [ 67s] libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. [ 74s] configure.ac:55: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body [ 74s] ../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is expanded from... [ 74s] configure.ac:55: the top level [ 76s] configure.ac:55: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body [ 76s] ../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is expanded from... [ 76s] configure.ac:55: the top level [ 83s] configure.ac:55: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body [ 83s] ../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is expanded from... [ 83s] configure.ac:55: the top level [ 84s] configure.ac:32: installing `./config.guess' [ 84s] configure.ac:32: installing `./config.sub' [ 84s] configure.ac:7: installing `./install-sh' [ 84s] configure.ac:7: installing `./missing' [ 84s] Makefile.am: installing `./depcomp' [ 85s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 85s] + export CFLAGS [ 85s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 85s] + export CXXFLAGS [ 85s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 85s] + export FFLAGS [ 85s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --with-module-dir=/usr/lib/pulse-0.9.23/modules [ 85s] checking for a BSD-compatible install... /usr/bin/install -c [ 86s] checking whether build environment is sane... yes [ 86s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 86s] checking for gawk... gawk [ 86s] checking whether make sets $(MAKE)... yes [ 86s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 86s] checking for gcc... gcc [ 86s] checking whether the C compiler works... yes [ 86s] checking for C compiler default output file name... a.out [ 86s] checking for suffix of executables... [ 86s] checking whether we are cross compiling... no [ 86s] checking for suffix of object files... o [ 87s] checking whether we are using the GNU C compiler... yes [ 87s] checking whether gcc accepts -g... yes [ 87s] checking for gcc option to accept ISO C89... none needed [ 87s] checking for style of include used by make... GNU [ 87s] checking dependency style of gcc... gcc3 [ 87s] checking for an ANSI C-conforming const... yes [ 87s] checking how to run the C preprocessor... gcc -E [ 87s] checking for grep that handles long lines and -e... /bin/grep [ 87s] checking for egrep... /bin/grep -E [ 87s] checking for ANSI C header files... yes [ 87s] checking for sys/types.h... yes [ 87s] checking for sys/stat.h... yes [ 87s] checking for stdlib.h... yes [ 87s] checking for string.h... yes [ 87s] checking for memory.h... yes [ 87s] checking for strings.h... yes [ 87s] checking for inttypes.h... yes [ 87s] checking for stdint.h... yes [ 87s] checking for unistd.h... yes [ 87s] checking for stdlib.h... (cached) yes [ 87s] checking for unistd.h... (cached) yes [ 87s] checking for sys/param.h... yes [ 87s] checking for getpagesize... yes [ 87s] checking for working mmap... yes [ 87s] checking for stdlib.h... (cached) yes [ 87s] checking for GNU libc compatible realloc... yes [ 87s] checking sys/select.h usability... yes [ 87s] checking sys/select.h presence... yes [ 87s] checking for sys/select.h... yes [ 88s] checking sys/socket.h usability... yes [ 88s] checking sys/socket.h presence... yes [ 88s] checking for sys/socket.h... yes [ 88s] checking types of arguments for select... int,fd_set *,struct timeval * [ 88s] checking whether lstat correctly handles trailing slash... yes [ 88s] checking whether stat accepts an empty string... no [ 88s] checking for vprintf... yes [ 88s] checking for _doprnt... no [ 88s] checking for stdbool.h that conforms to C99... yes [ 88s] checking for _Bool... yes [ 88s] checking for ANSI C header files... (cached) yes [ 88s] checking whether time.h and sys/time.h may both be included... yes [ 88s] checking whether gcc needs -traditional... no [ 88s] checking build system type... armv7l-unknown-linux-gnueabi [ 88s] checking host system type... armv7l-unknown-linux-gnueabi [ 88s] checking for a sed that does not truncate output... /bin/sed [ 88s] checking for fgrep... /bin/grep -F [ 88s] checking for ld used by gcc... /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld [ 88s] checking if the linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) is GNU ld... yes [ 88s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 88s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 88s] checking whether ln -s works... yes [ 88s] checking the maximum length of command line arguments... 1572864 [ 88s] checking whether the shell understands some XSI constructs... yes [ 88s] checking whether the shell understands "+="... yes [ 88s] checking for /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld option to reload object files... -r [ 88s] checking for armv7l-unknown-linux-gnueabi-objdump... no [ 88s] checking for objdump... objdump [ 88s] checking how to recognize dependent libraries... pass_all [ 88s] checking for armv7l-unknown-linux-gnueabi-ar... no [ 88s] checking for ar... ar [ 88s] checking for armv7l-unknown-linux-gnueabi-strip... no [ 88s] checking for strip... strip [ 88s] checking for armv7l-unknown-linux-gnueabi-ranlib... no [ 88s] checking for ranlib... ranlib [ 88s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 88s] checking for dlfcn.h... yes [ 88s] checking for objdir... .libs [ 88s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 88s] checking for gcc option to produce PIC... -fPIC -DPIC [ 88s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 88s] checking if gcc static flag -static works... no [ 88s] checking if gcc supports -c -o file.o... yes [ 88s] checking if gcc supports -c -o file.o... (cached) yes [ 89s] checking whether the gcc linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) supports shared libraries... yes [ 89s] checking whether -lc should be explicitly linked in... no [ 89s] checking dynamic linker characteristics... GNU/Linux ld.so [ 89s] checking how to hardcode library paths into programs... immediate [ 89s] checking whether stripping libraries is possible... yes [ 89s] checking if libtool supports shared libraries... yes [ 89s] checking whether to build shared libraries... yes [ 89s] checking whether to build static libraries... yes [ 89s] checking target operating system... linux [ 89s] checking whether gcc knows __sync_bool_compare_and_swap()... yes [ 89s] checking whether we need libatomic_ops... no [ 89s] checking ltdl.h usability... yes [ 89s] checking ltdl.h presence... yes [ 89s] checking for ltdl.h... yes [ 89s] checking for lt_dladvise_init in -lltdl... yes [ 89s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 89s] checking for pkg-config... /usr/bin/pkg-config [ 89s] checking pkg-config is at least version 0.9.0... yes [ 89s] checking for PULSE... yes [ 89s] checking for ANSI C header files... (cached) yes [ 89s] checking fcntl.h usability... yes [ 89s] checking fcntl.h presence... yes [ 89s] checking for fcntl.h... yes [ 89s] checking for memory.h... (cached) yes [ 89s] checking for stdlib.h... (cached) yes [ 89s] checking for string.h... (cached) yes [ 89s] checking sys/time.h usability... yes [ 89s] checking sys/time.h presence... yes [ 89s] checking for sys/time.h... yes [ 89s] checking for unistd.h... (cached) yes [ 89s] checking errno.h usability... yes [ 89s] checking errno.h presence... yes [ 89s] checking for errno.h... yes [ 89s] checking for sys/types.h... (cached) yes [ 89s] checking for sys/stat.h... (cached) yes [ 89s] checking for an ANSI C-conforming const... (cached) yes [ 89s] checking for pid_t... yes [ 89s] checking for size_t... yes [ 89s] checking for working alloca.h... yes [ 89s] checking for alloca... yes [ 89s] checking vfork.h usability... no [ 89s] checking vfork.h presence... no [ 89s] checking for vfork.h... no [ 89s] checking for fork... yes [ 89s] checking for vfork... yes [ 90s] checking for working fork... yes [ 90s] checking for working vfork... (cached) yes [ 90s] checking for stdlib.h... (cached) yes [ 90s] checking for GNU libc compatible malloc... yes [ 90s] checking for working memcmp... yes [ 90s] checking for sys/select.h... (cached) yes [ 90s] checking for sys/socket.h... (cached) yes [ 90s] checking types of arguments for select... (cached) int,fd_set *,struct timeval * [ 90s] checking return type of signal handlers... void [ 90s] checking for memset... yes [ 90s] checking for select... yes [ 90s] configure: creating ./config.status [ 90s] config.status: creating Makefile [ 90s] config.status: creating config.h [ 90s] config.status: executing depfiles commands [ 90s] config.status: executing libtool commands [ 90s] + make -j4 [ 90s] make all-am [ 90s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/pulseaudio-modules-mfld-blackbay-0.1' [ 90s] /bin/sh ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -MT module_stream_policy_mfld_la-module-stream-policy-mfld.lo -MD -MP -MF .deps/module_stream_policy_mfld_la-module-stream-policy-mfld.Tpo -c -o module_stream_policy_mfld_la-module-stream-policy-mfld.lo `test -f 'src/module-stream-policy-mfld.c' || echo './'`src/module-stream-policy-mfld.c [ 90s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -MT module_stream_policy_mfld_la-module-stream-policy-mfld.lo -MD -MP -MF .deps/module_stream_policy_mfld_la-module-stream-policy-mfld.Tpo -c src/module-stream-policy-mfld.c -fPIC -DPIC -o .libs/module_stream_policy_mfld_la-module-stream-policy-mfld.o [ 91s] src/module-stream-policy-mfld.c: In function 'get_bt_sink': [ 91s] src/module-stream-policy-mfld.c:94:17: warning: unused variable 'api_name' [ 91s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -MT module_stream_policy_mfld_la-module-stream-policy-mfld.lo -MD -MP -MF .deps/module_stream_policy_mfld_la-module-stream-policy-mfld.Tpo -c src/module-stream-policy-mfld.c -o module_stream_policy_mfld_la-module-stream-policy-mfld.o >/dev/null 2>&1 [ 91s] mv -f .deps/module_stream_policy_mfld_la-module-stream-policy-mfld.Tpo .deps/module_stream_policy_mfld_la-module-stream-policy-mfld.Plo [ 91s] /bin/sh ./libtool --tag=CC --mode=link gcc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -module -disable-static -avoid-version --no-undefined -lpulse -lpulsecommon-0.9.23 -lpulsecore-0.9.23 -L/usr/lib/pulse-0.9.23/modules -o module-stream-policy-mfld.la -rpath /usr/lib/pulse-0.9.23/modules module_stream_policy_mfld_la-module-stream-policy-mfld.lo [ 91s] libtool: link: gcc -shared .libs/module_stream_policy_mfld_la-module-stream-policy-mfld.o -lpulse -lpulsecommon-0.9.23 -lpulsecore-0.9.23 -L/usr/lib/pulse-0.9.23/modules -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -mthumb -Wl,-soname -Wl,module-stream-policy-mfld.so -o .libs/module-stream-policy-mfld.so [ 91s] libtool: link: ar cru .libs/module-stream-policy-mfld.a module_stream_policy_mfld_la-module-stream-policy-mfld.o [ 91s] libtool: link: ranlib .libs/module-stream-policy-mfld.a [ 91s] libtool: link: ( cd ".libs" && rm -f "module-stream-policy-mfld.la" && ln -s "../module-stream-policy-mfld.la" "module-stream-policy-mfld.la" ) [ 91s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/pulseaudio-modules-mfld-blackbay-0.1' [ 91s] + exit 0 [ 91s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.zcxkTd [ 91s] + umask 022 [ 91s] + cd /home/abuild/rpmbuild/BUILD [ 91s] + cd pulseaudio-modules-mfld-blackbay-0.1 [ 91s] + LANG=C [ 91s] + export LANG [ 91s] + unset DISPLAY [ 91s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/pulseaudio-modules-mfld-blackbay-0.1-1.5.arm [ 91s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/pulseaudio-modules-mfld-blackbay-0.1-1.5.arm [ 91s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/pulseaudio-modules-mfld-blackbay-0.1-1.5.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/pulseaudio-modules-mfld-blackbay-0.1-1.5.arm install [ 91s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/pulseaudio-modules-mfld-blackbay-0.1' [ 91s] test -z "/usr/lib/pulse-0.9.23/modules" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/pulseaudio-modules-mfld-blackbay-0.1-1.5.arm/usr/lib/pulse-0.9.23/modules" [ 91s] /bin/sh ./libtool --mode=install /usr/bin/install -c module-stream-policy-mfld.la '/home/abuild/rpmbuild/BUILDROOT/pulseaudio-modules-mfld-blackbay-0.1-1.5.arm/usr/lib/pulse-0.9.23/modules' [ 91s] libtool: install: /usr/bin/install -c .libs/module-stream-policy-mfld.so /home/abuild/rpmbuild/BUILDROOT/pulseaudio-modules-mfld-blackbay-0.1-1.5.arm/usr/lib/pulse-0.9.23/modules/module-stream-policy-mfld.so [ 91s] libtool: install: /usr/bin/install -c .libs/module-stream-policy-mfld.lai /home/abuild/rpmbuild/BUILDROOT/pulseaudio-modules-mfld-blackbay-0.1-1.5.arm/usr/lib/pulse-0.9.23/modules/module-stream-policy-mfld.la [ 91s] libtool: install: /usr/bin/install -c .libs/module-stream-policy-mfld.a /home/abuild/rpmbuild/BUILDROOT/pulseaudio-modules-mfld-blackbay-0.1-1.5.arm/usr/lib/pulse-0.9.23/modules/module-stream-policy-mfld.a [ 91s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/pulseaudio-modules-mfld-blackbay-0.1-1.5.arm/usr/lib/pulse-0.9.23/modules/module-stream-policy-mfld.a [ 91s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/pulseaudio-modules-mfld-blackbay-0.1-1.5.arm/usr/lib/pulse-0.9.23/modules/module-stream-policy-mfld.a [ 91s] libtool: install: warning: remember to run `libtool --finish /usr/lib/pulse-0.9.23/modules' [ 91s] make[1]: Nothing to be done for `install-data-am'. [ 91s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/pulseaudio-modules-mfld-blackbay-0.1' [ 91s] + rm -f /home/abuild/rpmbuild/BUILDROOT/pulseaudio-modules-mfld-blackbay-0.1-1.5.arm/usr/share/info/dir [ 91s] + find /home/abuild/rpmbuild/BUILDROOT/pulseaudio-modules-mfld-blackbay-0.1-1.5.arm -regex '.*\.la$' [ 91s] + xargs rm -f -- [ 91s] + find /home/abuild/rpmbuild/BUILDROOT/pulseaudio-modules-mfld-blackbay-0.1-1.5.arm -regex '.*\.a$' [ 91s] + xargs rm -f -- [ 91s] + rm -rf '/usr/lib/pulse-*/modules/module-*.la' [ 91s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/pulseaudio-modules-mfld-blackbay-0.1 [ 91s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pulseaudio-modules-mfld-blackbay-0.1-1.5.arm/usr/lib/pulse-0.9.23/modules/module-stream-policy-mfld.so [ 91s] 11 blocks [ 91s] + /usr/lib/rpm/check-buildroot [ 91s] + /usr/lib/rpm//brp-compress [ 91s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 91s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 91s] + /usr/lib/rpm/brp-python-bytecompile [ 91s] + /usr/lib/rpm/brp-python-hardlink [ 91s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/pulseaudio-modules-mfld-blackbay-0.1-1.5.arm [ 91s] Processing files: pulseaudio-modules-mfld-blackbay-0.1-1.5.armv7l [ 91s] Provides: module-stream-policy-mfld.so [ 91s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 91s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 91s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 91s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 91s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpulse.so.0 libpulse.so.0(PULSE_0) libpulsecommon-0.9.23.so libpulsecore-0.9.23.so [ 91s] Processing files: pulseaudio-modules-mfld-blackbay-debuginfo-0.1-1.5.armv7l [ 91s] Processing files: pulseaudio-modules-mfld-blackbay-debugsource-0.1-1.5.armv7l [ 91s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/pulseaudio-modules-mfld-blackbay-0.1-1.5.arm [ 91s] Wrote: /home/abuild/rpmbuild/SRPMS/pulseaudio-modules-mfld-blackbay-0.1-1.5.src.rpm [ 91s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pulseaudio-modules-mfld-blackbay-0.1-1.5.armv7l.rpm [ 91s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pulseaudio-modules-mfld-blackbay-debuginfo-0.1-1.5.armv7l.rpm [ 91s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pulseaudio-modules-mfld-blackbay-debugsource-0.1-1.5.armv7l.rpm [ 91s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.LHxz8D [ 91s] + umask 022 [ 91s] + cd /home/abuild/rpmbuild/BUILD [ 91s] + cd pulseaudio-modules-mfld-blackbay-0.1 [ 91s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/pulseaudio-modules-mfld-blackbay-0.1-1.5.arm [ 91s] + exit 0 [ 91s] ... checking for files with abuild user/group [ 92s] ... creating baselibs [ 92s] ... comparing built packages with the former built [ 92s] /usr/lib/build/rpm-check.sh [ 92s] compare /.build.oldpackages/pulseaudio-modules-mfld-blackbay-0.1-1.4.src.rpm /home/abuild/rpmbuild/SRPMS/pulseaudio-modules-mfld-blackbay-0.1-1.5.src.rpm [ 92s] compare /.build.oldpackages/pulseaudio-modules-mfld-blackbay-0.1-1.4.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/pulseaudio-modules-mfld-blackbay-0.1-1.5.armv7l.rpm [ 93s] --- /tmp/tmp.N8B2gvpdIw 2013-11-07 14:18:19.234275515 +0000 [ 93s] +++ /tmp/tmp.yQPcOM49uY 2013-11-07 14:18:19.250275514 +0000 [ 93s] @@ -1,7 +1,7 @@ [ 93s] pulseaudio-modules-mfld-blackbay 0.1 (none) [ 93s] pulseaudio modules for mfld-blackbay [ 93s] pulseaudio modules for mfld-blackbay [ 93s] - tizen Tizen:2.2:Main obs://w04.vlan200.tizendev.org/Tizen:2.2:Main/standard/3c65e9d3fcecc10b6da46a61570d6f06-pulseaudio-modules-mfld-blackbay LGPLv2+ LGPLv2+ [ 93s] + tizen Tizen:2.2:Main obs://w10.vlan200.tizendev.org/Tizen:2.2:Main/standard/3c65e9d3fcecc10b6da46a61570d6f06-pulseaudio-modules-mfld-blackbay LGPLv2+ LGPLv2+ [ 93s] System/Libraries (none) (none) (none) (none) [ 93s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 93s] cpio gzip 9 [ 93s] RPM meta information is different [ 93s] compare /.build.oldpackages/pulseaudio-modules-mfld-blackbay-debuginfo-0.1-1.4.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/pulseaudio-modules-mfld-blackbay-debuginfo-0.1-1.5.armv7l.rpm [ 93s] --- /tmp/tmp.Jjbm4f0Lur 2013-11-07 14:18:19.290275514 +0000 [ 93s] +++ /tmp/tmp.zO8RqkbBVf 2013-11-07 14:18:19.306275514 +0000 [ 93s] @@ -3,7 +3,7 @@ [ 93s] This package provides debug information for package pulseaudio-modules-mfld-blackbay. [ 93s] Debug information is useful when developing applications that use this [ 93s] package or when debugging this package. [ 93s] - tizen Tizen:2.2:Main obs://w04.vlan200.tizendev.org/Tizen:2.2:Main/standard/3c65e9d3fcecc10b6da46a61570d6f06-pulseaudio-modules-mfld-blackbay LGPLv2+ LGPLv2+ [ 93s] + tizen Tizen:2.2:Main obs://w10.vlan200.tizendev.org/Tizen:2.2:Main/standard/3c65e9d3fcecc10b6da46a61570d6f06-pulseaudio-modules-mfld-blackbay LGPLv2+ LGPLv2+ [ 93s] Development/Debug (none) (none) (none) (none) [ 93s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 93s] cpio gzip 9 [ 93s] RPM meta information is different [ 93s] compare /.build.oldpackages/pulseaudio-modules-mfld-blackbay-debugsource-0.1-1.4.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/pulseaudio-modules-mfld-blackbay-debugsource-0.1-1.5.armv7l.rpm [ 93s] --- /tmp/tmp.eH5qabRllb 2013-11-07 14:18:19.350275514 +0000 [ 93s] +++ /tmp/tmp.5f45XQk3gF 2013-11-07 14:18:19.362275514 +0000 [ 93s] @@ -3,7 +3,7 @@ [ 93s] This package provides debug sources for package pulseaudio-modules-mfld-blackbay. [ 93s] Debug sources are useful when developing applications that use this [ 93s] package or when debugging this package. [ 93s] - tizen Tizen:2.2:Main obs://w04.vlan200.tizendev.org/Tizen:2.2:Main/standard/3c65e9d3fcecc10b6da46a61570d6f06-pulseaudio-modules-mfld-blackbay LGPLv2+ LGPLv2+ [ 93s] + tizen Tizen:2.2:Main obs://w10.vlan200.tizendev.org/Tizen:2.2:Main/standard/3c65e9d3fcecc10b6da46a61570d6f06-pulseaudio-modules-mfld-blackbay LGPLv2+ LGPLv2+ [ 93s] Development/Debug (none) (none) (none) (none) [ 93s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 93s] cpio gzip 9 [ 93s] RPM meta information is different [ 93s] ... saving built statistics [ 93s] ... saving built packages [ 93s] /home/abuild/rpmbuild/RPMS/armv7l/pulseaudio-modules-mfld-blackbay-0.1-1.5.armv7l.rpm [ 93s] /home/abuild/rpmbuild/RPMS/armv7l/pulseaudio-modules-mfld-blackbay-debuginfo-0.1-1.5.armv7l.rpm [ 93s] /home/abuild/rpmbuild/RPMS/armv7l/pulseaudio-modules-mfld-blackbay-debugsource-0.1-1.5.armv7l.rpm [ 93s] /home/abuild/rpmbuild/SRPMS/pulseaudio-modules-mfld-blackbay-0.1-1.5.src.rpm [ 93s] /home/abuild/rpmbuild/OTHER/_statistics [ 93s] [ 93s] w10 finished "build pulseaudio-modules-mfld-blackbay.spec" at Thu Nov 7 14:18:19 UTC 2013. [ 93s] [ 94s] /.build/build: line 368: 238 Killed background_monitor_process [ 96s] [ 89.879046] SysRq : Power Off [ 96s] [ 89.889412] Power down. [ 96s] build: extracting built packages... [ 96s] pulseaudio-modules-mfld-blackbay-0.1-1.5.armv7l.rpm [ 96s] pulseaudio-modules-mfld-blackbay-debuginfo-0.1-1.5.armv7l.rpm [ 96s] pulseaudio-modules-mfld-blackbay-debugsource-0.1-1.5.armv7l.rpm [ 96s] pulseaudio-modules-mfld-blackbay-0.1-1.5.src.rpm [ 96s] _statistics