[ 0s] Using BUILD_ROOT=/srv/build/root_2/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_2/root [ 0s] [ 0s] [ 0s] w13 started "build libslp-db-util.spec" at Thu Nov 7 13:55:32 UTC 2013. [ 0s] [ 0s] Building libslp-db-util for project 'Tizen:2.2:Main' repository 'standard' arch 'i586' srcmd5 '22269cd5773248ddce197eacbecc6f28' [ 0s] [ 0s] processing specfile /srv/build/root_2/.build-srcdir/libslp-db-util.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_2/.build-srcdir/libslp-db-util.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_2/.build.rpmlist /srv/build/root_2/.build-srcdir/libslp-db-util.spec build rpmlint-Factory ... [ 1s] hostname: Name or service not known [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> libacl [ 1s] breaking dependency libacl -> eglibc [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> libacl -> libattr [ 1s] breaking dependency eglibc-common -> coreutils [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: eglibc -> libgcc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: rpm -> rpm-libs [ 1s] breaking dependency rpm-libs -> rpm [ 1s] [1/30] preinstalling libgcc... [ 1s] [2/30] preinstalling setup... [ 1s] [3/30] preinstalling filesystem... [ 1s] [4/30] preinstalling eglibc... [ 1s] [5/30] preinstalling bzip2-libs... [ 1s] [6/30] preinstalling elfutils-libelf... [ 1s] [7/30] preinstalling libattr... [ 1s] [8/30] preinstalling liblua... [ 1s] [9/30] preinstalling ncurses-libs... [ 1s] [10/30] preinstalling nspr... [ 1s] [11/30] preinstalling nss-softokn-freebl... [ 1s] [12/30] preinstalling popt... [ 1s] [13/30] preinstalling readline... [ 1s] [14/30] preinstalling sed... [ 1s] [15/30] preinstalling sqlite... [ 1s] [16/30] preinstalling xz-libs... [ 1s] [17/30] preinstalling zlib... [ 1s] [18/30] preinstalling bash... [ 1s] [19/30] preinstalling diffutils... [ 1s] [20/30] preinstalling libstdc++... [ 2s] [21/30] preinstalling eglibc-common... [ 2s] [22/30] preinstalling libacl... [ 2s] [23/30] preinstalling libcap... [ 2s] [24/30] preinstalling libfile... [ 2s] [25/30] preinstalling bzip2... [ 2s] [26/30] preinstalling nss... [ 2s] [27/30] preinstalling tar... [ 2s] [28/30] preinstalling coreutils... [ 2s] [29/30] preinstalling rpm-libs... [ 2s] [30/30] preinstalling rpm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 3s] copying packages... [ 3s] reordering...cycle: bash -> eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> bash [ 3s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 3s] breaking dependency eglibc-common -> coreutils [ 3s] cycle: eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> findutils [ 3s] breaking dependency eglibc-common -> findutils [ 3s] cycle: eglibc -> eglibc-common -> grep [ 3s] breaking dependency grep -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 3s] breaking dependency libpcre -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 3s] breaking dependency libpcre -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 3s] breaking dependency libstdc++ -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 3s] breaking dependency eglibc -> eglibc-common [ 3s] cycle: eglibc -> libgcc [ 3s] breaking dependency libgcc -> eglibc [ 3s] cycle: filesystem -> setup [ 3s] breaking dependency setup -> filesystem [ 3s] cycle: ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses [ 3s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses-base [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl -> perl-libs [ 3s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 3s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl -> perl-IO-Compress-Zlib [ 3s] breaking dependency perl -> perl-IO-Compress-Zlib [ 3s] cycle: perl -> perl-IO-Compress-Base [ 3s] breaking dependency perl -> perl-IO-Compress-Base [ 3s] cycle: perl -> perl-Module-Pluggable [ 3s] breaking dependency perl -> perl-Module-Pluggable [ 3s] cycle: perl -> perl-Pod-Simple [ 3s] breaking dependency perl -> perl-Pod-Simple [ 3s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 3s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 3s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 3s] cycle: perl-CPAN -> perl-Test-Harness [ 3s] breaking dependency perl-Test-Harness -> perl-CPAN [ 3s] cycle: nss-sysinit -> nss [ 3s] breaking dependency nss -> nss-sysinit [ 3s] cycle: rpm-libs -> rpm [ 3s] breaking dependency rpm -> rpm-libs [ 3s] done [ 4s] booting kvm ... [ 4s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 8192 -drive file=/srv/build/root_2/root,if=virtio,cache=none -drive file=/srv/build/root_2/root,if=ide,index=0,cache=none -drive file=/srv/build/root_2/swap,if=virtio,cache=none -smp 4 [ 8s] doing fast boot [ 8s] Creating device nodes with udev [ 9s] Waiting for device /dev/vda to appear: ok [ 9s] fsck from util-linux 2.21.2 [ 9s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 9s] /dev/vda: clean, 6090/2097152 files, 192364/8388608 blocks [ 9s] fsck succeeded. Mounting root device read-write. [ 9s] Mounting root /dev/vda [ 9s] mount -o rw -t ext4 /dev/vda /root [ 9s] replacing /etc/mtab with symlink to /proc/self/mounts [ 10s] 2nd stage started in virtual machine [ 10s] machine type: x86_64 [ 10s] switching personality to 8... [ 10s] 2nd stage started in virtual machine [ 10s] machine type: i686 [ 10s] swapon on /dev/vdb [ 10s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 10s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 10s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 10s] logging output to //.build.log... [ 10s] processing specfile /.build-srcdir/libslp-db-util.spec ... [ 10s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/libslp-db-util.spec build rpmlint-Factory ... [ 10s] initializing rpm db... [ 10s] [1/118] installing cloog-0.15.9-1.28 [ 10s] [2/118] installing kernel-headers-3.0.15-1.7 [ 10s] [3/118] installing tizen-release-2.2.0-1.7 [ 10s] [4/118] installing tzdata-2011h-1.7 [ 10s] [5/118] installing libgcc-4.5.3-2.13 [ 10s] [6/118] installing setup-0.1-2.6 [ 10s] [7/118] installing filesystem-0.1-1.8 [ 11s] warning: group lock does not exist - using root [ 11s] warning: group mail does not exist - using root [ 11s] [8/118] installing eglibc-2.13-2.16 [ 11s] [9/118] installing libstdc++-4.5.3-2.13 [ 11s] [10/118] installing bzip2-libs-1.0.5-5.11 [ 11s] [11/118] installing c-ares-1.7.4-3.18 [ 12s] [12/118] installing cpio-2.8-4.7 [ 12s] [13/118] installing e2fsprogs-libs-1.41.9-3.7 [ 12s] [14/118] installing elfutils-libelf-0.152-2.36 [ 12s] [15/118] installing expat-2.0.1-8.10 [ 12s] [16/118] installing findutils-4.2.31-2.7 [ 12s] [17/118] installing gdbm-1.8.3-2.28 [ 12s] [18/118] installing libattr-2.4.44-8.10 [ 12s] [19/118] installing libffi-3.0.9-101.1 [ 12s] [20/118] installing libidn-1.15-7.24 [ 12s] [21/118] installing liblua-5.1.4-7.7 [ 12s] [22/118] installing libstdc++-devel-4.5.3-2.13 [ 12s] [23/118] installing libuuid-2.20.2-7.6 [ 15s] [24/118] installing lzo-2.03-2.16 [ 15s] [25/118] installing m4-1.4.14-1.8 [ 15s] [26/118] installing make-3.81-1.7 [ 16s] [27/118] installing net-tools-1.60-88.6 [ 16s] [28/118] installing nspr-4.8.7-1.9 [ 16s] [29/118] installing nss-softokn-freebl-3.12.9-3.22 [ 16s] [30/118] installing patch-2.6.1.169-1.6 [ 16s] [31/118] installing pkgconfig-0.25-3.9 [ 16s] [32/118] installing popt-1.16-4.10 [ 16s] [33/118] installing readline-5.2-14.7 [ 16s] [34/118] installing sed-4.1.5-3.6 [ 16s] [35/118] installing smack-1.0slp2+s12-1.6 [ 16s] [36/118] installing sqlite-3.7.13-1.10 [ 16s] [37/118] installing xz-libs-5.0.3-2.17 [ 16s] [38/118] installing zlib-1.2.5-3.17 [ 16s] [39/118] installing bash-4.1-4.7 [ 16s] [40/118] installing diffutils-3.0-4.7 [ 16s] [41/118] installing libgomp-4.5.3-2.13 [ 16s] [42/118] installing gmp-5.0.1-2.12 [ 17s] [43/118] installing libpcre-7.7-4.38 [ 17s] [44/118] installing ncurses-libs-5.7-4.9 [ 18s] [45/118] installing build-compare-2009.10.14-26.9 [ 18s] [46/118] installing eglibc-headers-2.13-2.16 [ 19s] [47/118] installing grep-2.5.1a-63.7 [ 19s] [48/118] installing libacl-2.2.49-3.8 [ 20s] [49/118] installing libcap-2.21-2.11 [ 20s] [50/118] installing libfile-5.04-2.11 [ 21s] [51/118] installing libxml2-2.7.8-10.2 [ 26s] [52/118] installing lzo-minilzo-2.03-2.16 [ 26s] [53/118] installing mpfr-3.0.0-1.12 [ 27s] [54/118] installing ncurses-5.7-4.9 [ 27s] [55/118] installing sqlite-devel-3.7.13-1.10 [ 28s] [56/118] installing unzip-6.0-10.17 [ 28s] [57/118] installing zlib-devel-1.2.5-3.17 [ 29s] [58/118] installing bzip2-1.0.5-5.11 [ 34s] [59/118] installing glib2-2.32.3-6.2 [ 56s] [60/118] installing libblkid-2.20.2-7.6 [ 56s] [61/118] installing smack-utils-1.0slp2+s12-1.6 [ 57s] [62/118] installing xz-5.0.3-2.17 [ 58s] [63/118] installing binutils-2.22-1.10 [ 59s] [64/118] installing libicu-4.8-2.1 [ 63s] [65/118] installing ppl-0.10.2-10.14 [ 73s] [66/118] installing elfutils-libs-0.152-2.36 [ 74s] [67/118] installing nss-3.12.9-3.22 [ 79s] [68/118] installing perl-5.12.1-62.7 [ 129s] [69/118] installing ncurses-base-5.7-4.9 [ 130s] [70/118] installing perl-HTML-Tagset-3.20-8.4 [ 130s] [71/118] installing perl-IO-Compress-Base-2.008-62.7 [ 130s] [72/118] installing perl-Module-Pluggable-3.60-62.7 [ 131s] [73/118] installing perl-Pod-Escapes-1.04-62.7 [ 131s] [74/118] installing perl-TimeDate-1.20-1.6 [ 131s] [75/118] installing eglibc-devel-2.13-2.16 [ 131s] [76/118] installing libicu-devel-4.8-2.1 [ 132s] [77/118] installing perl-Compress-Raw-Zlib-2.008-62.7 [ 132s] [78/118] installing perl-libs-5.12.1-62.7 [ 134s] [79/118] installing tar-1.17-5.6 [ 135s] [80/118] installing coreutils-6.9-9.8 [ 136s] [81/118] installing file-5.04-2.11 [ 136s] [82/118] installing libdlog-0.4.1-17.7 [ 136s] chown: `root:app_logging': invalid user [ 136s] [83/118] installing libmount-2.20.2-7.6 [ 136s] [84/118] installing lzo-devel-2.03-2.16 [ 136s] [85/118] installing mpc-0.9-1.15 [ 136s] [86/118] installing openssl-1.0.1c-2.22 [ 136s] [87/118] installing perl-devel-5.12.1-62.7 [ 137s] [88/118] installing xz-lzma-compat-5.0.3-2.17 [ 137s] [89/118] installing cloog-ppl-0.15.9-1.28 [ 137s] [90/118] installing nss-sysinit-3.12.9-3.22 [ 137s] [91/118] installing elfutils-0.152-2.36 [ 137s] [92/118] installing eglibc-common-2.13-2.16 [ 146s] [93/118] installing libdlog-devel-0.4.1-17.7 [ 146s] [94/118] installing perl-ExtUtils-ParseXS-2.18-62.7 [ 147s] [95/118] installing perl-Pod-Simple-3.07-62.7 [ 147s] [96/118] installing perl-Test-Simple-0.80-62.7 [ 147s] [97/118] installing gawk-3.1.5-2.8 [ 147s] [98/118] installing gzip-1.3.14-3.6 [ 147s] [99/118] installing perl-IO-Compress-Zlib-2.008-62.7 [ 147s] [100/118] installing perl-Test-Harness-3.12-62.7 [ 147s] [101/118] installing build-2011.01.10a-1.8 [ 147s] [102/118] installing libcurl-7.28.1-3.22 [ 148s] [103/118] installing util-linux-2.20.2-7.6 [ 148s] warning: group tty does not exist - using root [ 148s] /bin/chown: `root:root': invalid user [ 148s] [104/118] installing libarchive-2.8.3-3.2 [ 148s] [105/118] installing cpp-4.5.3-2.13 [ 148s] [106/118] installing glib2-devel-2.32.3-6.2 [ 148s] [107/118] installing perl-ExtUtils-MakeMaker-6.36-62.7 [ 149s] [108/118] installing curl-7.28.1-3.22 [ 149s] [109/118] installing cmake-2.8.5-1.2 [ 149s] [110/118] installing gcc-4.5.3-2.13 [ 150s] [111/118] installing perl-CPAN-1.9205-62.7 [ 150s] [112/118] installing autoconf-2.68-1.10 [ 150s] [113/118] installing gcc-c++-4.5.3-2.13 [ 150s] [114/118] installing rpm-4.9.1-4.10 [ 152s] [115/118] installing automake-1.11.1-3.11 [ 152s] [116/118] installing rpm-libs-4.9.1-4.10 [ 152s] [117/118] installing libtool-2.2.6b-2.14 [ 153s] [118/118] installing rpm-build-4.9.1-4.10 [ 153s] now finalizing build dir... [ 153s] /.build/build: line 2680: //etc/passwd: No such file or directory [ 154s] ----------------------------------------------------------------- [ 154s] I have the following modifications for libslp-db-util.spec: [ 154s] 4c4 [ 154s] < Release: 5 [ 154s] --- [ 154s] > Release: 5.9 [ 154s] ----------------------------------------------------------------- [ 154s] ----- building libslp-db-util.spec (user abuild) [ 154s] ----------------------------------------------------------------- [ 154s] ----------------------------------------------------------------- [ 154s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --define 'disturl obs://w13.vlan200.tizendev.org/Tizen:2.2:Main/standard/22269cd5773248ddce197eacbecc6f28-libslp-db-util' /home/abuild/rpmbuild/SOURCES/libslp-db-util.spec [ 154s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.tnkc7w [ 154s] + umask 022 [ 154s] + cd /home/abuild/rpmbuild/BUILD [ 154s] + LANG=C [ 154s] + export LANG [ 154s] + unset DISPLAY [ 154s] + cd /home/abuild/rpmbuild/BUILD [ 154s] + rm -rf libslp-db-util-0.1.1 [ 154s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/libslp-db-util-0.1.1.tar.gz [ 154s] + /bin/tar -xf - [ 154s] + STATUS=0 [ 154s] + '[' 0 -ne 0 ']' [ 154s] + cd libslp-db-util-0.1.1 [ 154s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 154s] + exit 0 [ 154s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.3JQnYF [ 154s] + umask 022 [ 154s] + cd /home/abuild/rpmbuild/BUILD [ 154s] + cd libslp-db-util-0.1.1 [ 154s] + LANG=C [ 154s] + export LANG [ 154s] + unset DISPLAY [ 154s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 154s] + export CFLAGS [ 154s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 154s] + export CXXFLAGS [ 154s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 154s] + export FFLAGS [ 154s] + LD_AS_NEEDED=1 [ 154s] + export LD_AS_NEEDED [ 154s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 154s] + export CFLAGS [ 154s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 154s] + export CXXFLAGS [ 154s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 154s] + export FFLAGS [ 154s] + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON . [ 154s] -- The C compiler identification is GNU [ 154s] -- The CXX compiler identification is GNU [ 154s] -- Check for working C compiler: /usr/bin/gcc [ 154s] -- Check for working C compiler: /usr/bin/gcc -- works [ 154s] -- Detecting C compiler ABI info [ 154s] -- Detecting C compiler ABI info - done [ 154s] -- Check for working CXX compiler: /usr/bin/c++ [ 154s] -- Check for working CXX compiler: /usr/bin/c++ -- works [ 154s] -- Detecting CXX compiler ABI info [ 154s] -- Detecting CXX compiler ABI info - done [ 154s] -- checking for modules 'sqlite3;dlog;glib-2.0;icu-i18n' [ 154s] -- found sqlite3, version 3.7.9 [ 154s] -- found dlog, version 1.0 [ 154s] -- found glib-2.0, version 2.32.3 [ 154s] -- found icu-i18n, version 4.8.1 [ 154s] -- Configuring done [ 154s] -- Generating done [ 154s] CMake Warning: [ 154s] Manually-specified variables were not used by the project: [ 154s] [ 154s] CMAKE_INSTALL_LIBDIR [ 154s] INCLUDE_INSTALL_DIR [ 154s] SHARE_INSTALL_PREFIX [ 154s] SYSCONF_INSTALL_DIR [ 154s] [ 154s] [ 154s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1 [ 154s] + make -j4 [ 154s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1 -B/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1 --check-build-system CMakeFiles/Makefile.cmake 0 [ 154s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1/CMakeFiles /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1/CMakeFiles/progress.marks [ 154s] make -f CMakeFiles/Makefile2 all [ 154s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1' [ 154s] make -f CMakeFiles/SLP-db-util.dir/build.make CMakeFiles/SLP-db-util.dir/depend [ 154s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1' [ 154s] cd /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1 /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1 /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1 /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1 /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1/CMakeFiles/SLP-db-util.dir/DependInfo.cmake --color= [ 154s] Scanning dependencies of target SLP-db-util [ 154s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1' [ 154s] make -f CMakeFiles/SLP-db-util.dir/build.make CMakeFiles/SLP-db-util.dir/build [ 154s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1' [ 154s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1/CMakeFiles 1 [ 154s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1/CMakeFiles 2 [ 154s] [ 50%] [100%] Building C object CMakeFiles/SLP-db-util.dir/util_func.c.o [ 154s] Building C object CMakeFiles/SLP-db-util.dir/collation.c.o [ 154s] /usr/bin/gcc -DSLP_db_util_EXPORTS -DPREFIX=\"/usr\" -DFACTORYFS=\"\" -DDB_UTIL_USING_PLATFORM_DBG -DDB_UTIL_ENABLE_TRACE -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -fvisibility=hidden -ldl -g -fPIC -I/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1/include -o CMakeFiles/SLP-db-util.dir/util_func.c.o -c /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1/util_func.c [ 154s] /usr/bin/gcc -DSLP_db_util_EXPORTS -DPREFIX=\"/usr\" -DFACTORYFS=\"\" -DDB_UTIL_USING_PLATFORM_DBG -DDB_UTIL_ENABLE_TRACE -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -fvisibility=hidden -ldl -g -fPIC -I/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1/include -o CMakeFiles/SLP-db-util.dir/collation.c.o -c /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1/collation.c [ 155s] Linking C shared library libSLP-db-util.so [ 155s] /usr/bin/cmake -E cmake_link_script CMakeFiles/SLP-db-util.dir/link.txt --verbose=1 [ 155s] /usr/bin/gcc -fPIC -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -fvisibility=hidden -ldl -g -shared -Wl,-soname,libSLP-db-util.so.0 -o libSLP-db-util.so.0.1.0 CMakeFiles/SLP-db-util.dir/util_func.c.o CMakeFiles/SLP-db-util.dir/collation.c.o -lsqlite3 -ldlog -lpthread -lglib-2.0 -licui18n -licuuc -licudata -ldl [ 155s] /usr/bin/cmake -E cmake_symlink_library libSLP-db-util.so.0.1.0 libSLP-db-util.so.0 libSLP-db-util.so [ 155s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1' [ 155s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1/CMakeFiles 1 2 [ 155s] [100%] Built target SLP-db-util [ 155s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1' [ 155s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1/CMakeFiles 0 [ 155s] + exit 0 [ 155s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.XBaEnR [ 155s] + umask 022 [ 155s] + cd /home/abuild/rpmbuild/BUILD [ 155s] + cd libslp-db-util-0.1.1 [ 155s] + LANG=C [ 155s] + export LANG [ 155s] + unset DISPLAY [ 155s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-5.9.i386 [ 155s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-5.9.i386 [ 155s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-5.9.i386 [ 155s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-5.9.i386 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-5.9.i386 install [ 155s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1 -B/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1 --check-build-system CMakeFiles/Makefile.cmake 0 [ 155s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1/CMakeFiles /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1/CMakeFiles/progress.marks [ 155s] /usr/bin/make -f CMakeFiles/Makefile2 all [ 155s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1' [ 155s] /usr/bin/make -f CMakeFiles/SLP-db-util.dir/build.make CMakeFiles/SLP-db-util.dir/depend [ 155s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1' [ 155s] cd /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1 /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1 /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1 /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1 /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1/CMakeFiles/SLP-db-util.dir/DependInfo.cmake --color= [ 155s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1' [ 155s] /usr/bin/make -f CMakeFiles/SLP-db-util.dir/build.make CMakeFiles/SLP-db-util.dir/build [ 155s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1' [ 155s] make[2]: Nothing to be done for `CMakeFiles/SLP-db-util.dir/build'. [ 155s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1' [ 155s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1/CMakeFiles 1 2 [ 155s] [100%] Built target SLP-db-util [ 155s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1' [ 155s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1/CMakeFiles 0 [ 155s] /usr/bin/make -f CMakeFiles/Makefile2 preinstall [ 155s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1' [ 155s] make[1]: Nothing to be done for `preinstall'. [ 155s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1' [ 155s] Install the project... [ 155s] /usr/bin/cmake -P cmake_install.cmake [ 155s] -- Install configuration: "" [ 155s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-5.9.i386/usr/lib/libSLP-db-util.so.0.1.0 [ 155s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-5.9.i386/usr/lib/libSLP-db-util.so.0 [ 155s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-5.9.i386/usr/lib/libSLP-db-util.so [ 155s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-5.9.i386/usr/lib/pkgconfig/db-util.pc [ 155s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-5.9.i386/usr/include/db-util/db-util.h [ 155s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-5.9.i386/usr/include/db-util/db-util-common.h [ 155s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-5.9.i386/usr/include/db-util/util-func.h [ 155s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-5.9.i386/usr/include/db-util/collation.h [ 155s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-5.9.i386/usr/share/info/dir [ 155s] + xargs rm -f -- [ 155s] + find /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-5.9.i386 -regex '.*\.la$' [ 155s] + find /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-5.9.i386 -regex '.*\.a$' [ 155s] + xargs rm -f -- [ 155s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-5.9.i386/usr/share/license [ 155s] + install LICENSE /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-5.9.i386/usr/share/license/libslp-db-util [ 155s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1 [ 155s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-5.9.i386/usr/lib/libSLP-db-util.so.0.1.0 [ 155s] symlinked /usr/lib/debug/usr/lib/libSLP-db-util.so.0.1.0.debug to /usr/lib/debug/usr/lib/libSLP-db-util.so.0.debug [ 155s] symlinked /usr/lib/debug/usr/lib/libSLP-db-util.so.0.1.0.debug to /usr/lib/debug/usr/lib/libSLP-db-util.so.debug [ 155s] 47 blocks [ 155s] + /usr/lib/rpm/check-buildroot [ 155s] + /usr/lib/rpm//brp-compress [ 155s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 155s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 155s] + /usr/lib/rpm/brp-python-bytecompile [ 155s] + /usr/lib/rpm/brp-python-hardlink [ 155s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-5.9.i386 [ 155s] Processing files: libslp-db-util-0.1.1-5.9.i586 [ 155s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl [ 155s] cXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 155s] [ 155s] Provides: libSLP-db-util.so.0 [ 155s] Requires(interp): /bin/sh /sbin/ldconfig [ 155s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 155s] Requires(post): /bin/sh /sbin/ldconfig [ 155s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 155s] Requires: libSLP-db-util.so.0 libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1.3) libdl.so.2 libdl.so.2(GLIBC_2.0) libdl.so.2(GLIBC_2.1) libdlog.so.0 libglib-2.0.so.0 libicudata.so.48 libicui18n.so.48 libicuuc.so.48 libpthread.so.0 libsqlite3.so.0 [ 155s] Processing files: libslp-db-util-devel-0.1.1-5.9.i586 [ 155s] Provides: pkgconfig(db-util) = 0.1.0 [ 155s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 155s] Requires: /usr/bin/pkg-config pkgconfig(dlog) pkgconfig(glib-2.0) pkgconfig(icu-i18n) pkgconfig(sqlite3) [ 155s] Processing files: libslp-db-util-debuginfo-0.1.1-5.9.i586 [ 155s] Processing files: libslp-db-util-debugsource-0.1.1-5.9.i586 [ 155s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-5.9.i386 [ 155s] Wrote: /home/abuild/rpmbuild/SRPMS/libslp-db-util-0.1.1-5.9.src.rpm [ 155s] Wrote: /home/abuild/rpmbuild/RPMS/i586/libslp-db-util-0.1.1-5.9.i586.rpm [ 155s] Wrote: /home/abuild/rpmbuild/RPMS/i586/libslp-db-util-devel-0.1.1-5.9.i586.rpm [ 155s] Wrote: /home/abuild/rpmbuild/RPMS/i586/libslp-db-util-debuginfo-0.1.1-5.9.i586.rpm [ 155s] Wrote: /home/abuild/rpmbuild/RPMS/i586/libslp-db-util-debugsource-0.1.1-5.9.i586.rpm [ 155s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.T5a9u1 [ 155s] + umask 022 [ 155s] + cd /home/abuild/rpmbuild/BUILD [ 155s] + cd libslp-db-util-0.1.1 [ 155s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-5.9.i386 [ 155s] + exit 0 [ 155s] ... checking for files with abuild user/group [ 155s] ... creating baselibs [ 155s] ... comparing built packages with the former built [ 155s] /usr/lib/build/rpm-check.sh [ 155s] compare /.build.oldpackages/libslp-db-util-0.1.1-5.8.src.rpm /home/abuild/rpmbuild/SRPMS/libslp-db-util-0.1.1-5.9.src.rpm [ 155s] compare /.build.oldpackages/libslp-db-util-0.1.1-5.8.i586.rpm /home/abuild/rpmbuild/RPMS/i586/libslp-db-util-0.1.1-5.9.i586.rpm [ 155s] --- /tmp/tmp.LX1tXgp1R7 2013-11-07 13:58:06.354114338 +0000 [ 155s] +++ /tmp/tmp.t0BIKBykhA 2013-11-07 13:58:06.366114338 +0000 [ 155s] @@ -1,7 +1,7 @@ [ 155s] libslp-db-util 0.1.1 (none) [ 155s] DB Utility [ 155s] DB Utility. [ 155s] - tizen Tizen:2.2:Main obs://w06.vlan200.tizendev.org/Tizen:2.2:Main/standard/22269cd5773248ddce197eacbecc6f28-libslp-db-util Apache-2.0 Apache-2.0 [ 155s] + tizen Tizen:2.2:Main obs://w13.vlan200.tizendev.org/Tizen:2.2:Main/standard/22269cd5773248ddce197eacbecc6f28-libslp-db-util Apache-2.0 Apache-2.0 [ 155s] Application Framework/Database (none) (none) (none) (none) [ 155s] (none) 4.9.1 i586-tizen-linux-gnu [ 155s] cpio gzip 9 [ 155s] RPM meta information is different [ 155s] compare /.build.oldpackages/libslp-db-util-debuginfo-0.1.1-5.8.i586.rpm /home/abuild/rpmbuild/RPMS/i586/libslp-db-util-debuginfo-0.1.1-5.9.i586.rpm [ 155s] --- /tmp/tmp.s1YdrG3YwP 2013-11-07 13:58:06.410114339 +0000 [ 155s] +++ /tmp/tmp.7O1V6moTIj 2013-11-07 13:58:06.422114339 +0000 [ 155s] @@ -3,7 +3,7 @@ [ 155s] This package provides debug information for package libslp-db-util. [ 155s] Debug information is useful when developing applications that use this [ 155s] package or when debugging this package. [ 155s] - tizen Tizen:2.2:Main obs://w06.vlan200.tizendev.org/Tizen:2.2:Main/standard/22269cd5773248ddce197eacbecc6f28-libslp-db-util Apache-2.0 Apache-2.0 [ 155s] + tizen Tizen:2.2:Main obs://w13.vlan200.tizendev.org/Tizen:2.2:Main/standard/22269cd5773248ddce197eacbecc6f28-libslp-db-util Apache-2.0 Apache-2.0 [ 155s] Development/Debug (none) (none) (none) (none) [ 155s] (none) 4.9.1 i586-tizen-linux-gnu [ 155s] cpio gzip 9 [ 155s] RPM meta information is different [ 155s] compare /.build.oldpackages/libslp-db-util-debugsource-0.1.1-5.8.i586.rpm /home/abuild/rpmbuild/RPMS/i586/libslp-db-util-debugsource-0.1.1-5.9.i586.rpm [ 155s] --- /tmp/tmp.GWzXxe5pIs 2013-11-07 13:58:06.498114340 +0000 [ 155s] +++ /tmp/tmp.lh95HiopcC 2013-11-07 13:58:06.510114340 +0000 [ 155s] @@ -3,7 +3,7 @@ [ 155s] This package provides debug sources for package libslp-db-util. [ 155s] Debug sources are useful when developing applications that use this [ 155s] package or when debugging this package. [ 155s] - tizen Tizen:2.2:Main obs://w06.vlan200.tizendev.org/Tizen:2.2:Main/standard/22269cd5773248ddce197eacbecc6f28-libslp-db-util Apache-2.0 Apache-2.0 [ 155s] + tizen Tizen:2.2:Main obs://w13.vlan200.tizendev.org/Tizen:2.2:Main/standard/22269cd5773248ddce197eacbecc6f28-libslp-db-util Apache-2.0 Apache-2.0 [ 155s] Development/Debug (none) (none) (none) (none) [ 155s] (none) 4.9.1 i586-tizen-linux-gnu [ 155s] cpio gzip 9 [ 155s] RPM meta information is different [ 155s] compare /.build.oldpackages/libslp-db-util-devel-0.1.1-5.8.i586.rpm /home/abuild/rpmbuild/RPMS/i586/libslp-db-util-devel-0.1.1-5.9.i586.rpm [ 155s] --- /tmp/tmp.1gPWQ6FlyZ 2013-11-07 13:58:06.786114345 +0000 [ 155s] +++ /tmp/tmp.pyT6IFd4Cp 2013-11-07 13:58:06.798114345 +0000 [ 155s] @@ -1,7 +1,7 @@ [ 155s] libslp-db-util-devel 0.1.1 (none) [ 155s] Devel package for libslp-db-util (devel) [ 155s] Devel package for libslp-db-util (devel) [ 155s] - tizen Tizen:2.2:Main obs://w06.vlan200.tizendev.org/Tizen:2.2:Main/standard/22269cd5773248ddce197eacbecc6f28-libslp-db-util Apache-2.0 Apache-2.0 [ 155s] + tizen Tizen:2.2:Main obs://w13.vlan200.tizendev.org/Tizen:2.2:Main/standard/22269cd5773248ddce197eacbecc6f28-libslp-db-util Apache-2.0 Apache-2.0 [ 155s] Development/Libraries (none) (none) (none) (none) [ 155s] (none) 4.9.1 i586-tizen-linux-gnu [ 155s] cpio gzip 9 [ 155s] RPM meta information is different [ 155s] ... saving built statistics [ 155s] ... saving built packages [ 156s] /home/abuild/rpmbuild/RPMS/i586/libslp-db-util-0.1.1-5.9.i586.rpm [ 156s] /home/abuild/rpmbuild/RPMS/i586/libslp-db-util-debuginfo-0.1.1-5.9.i586.rpm [ 156s] /home/abuild/rpmbuild/RPMS/i586/libslp-db-util-debugsource-0.1.1-5.9.i586.rpm [ 156s] /home/abuild/rpmbuild/RPMS/i586/libslp-db-util-devel-0.1.1-5.9.i586.rpm [ 156s] /home/abuild/rpmbuild/SRPMS/libslp-db-util-0.1.1-5.9.src.rpm [ 156s] /home/abuild/rpmbuild/OTHER/_statistics [ 156s] [ 156s] w13 finished "build libslp-db-util.spec" at Thu Nov 7 13:58:07 UTC 2013. [ 156s] [ 159s] [ 151.426933] SysRq : Power Off [ 159s] [ 151.740385] Power down. [ 160s] build: extracting built packages... [ 160s] libslp-db-util-0.1.1-5.9.i586.rpm [ 160s] libslp-db-util-debuginfo-0.1.1-5.9.i586.rpm [ 160s] libslp-db-util-debugsource-0.1.1-5.9.i586.rpm [ 160s] libslp-db-util-devel-0.1.1-5.9.i586.rpm [ 160s] libslp-db-util-0.1.1-5.9.src.rpm [ 160s] _statistics