[ 0s] Using BUILD_ROOT=/srv/build/root_1/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_1/root [ 0s] [ 0s] [ 0s] w03 started "build _service:gbs:capi-system-device.spec" at Fri Feb 6 05:44:56 UTC 2015. [ 0s] [ 0s] Building capi-system-device for project 'Tizen:2.3:Mobile' repository 'target' arch 'armv7l' srcmd5 '2bc7a9a5cf40c0c401651744a8c6f221' [ 0s] [ 0s] processing specfile /srv/build/root_1/.build-srcdir/_service:gbs:capi-system-device.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_1/.build-srcdir/_service:gbs:capi-system-device.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_1/.build.rpmlist /srv/build/root_1/.build-srcdir/_service:gbs:capi-system-device.spec build rpmlint-Factory ... [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils [ 1s] breaking dependency eglibc-common -> coreutils [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc-common -> eglibc [ 1s] cycle: libgcc -> eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: libgcc -> eglibc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: rpm-libs -> rpm [ 1s] breaking dependency rpm-libs -> rpm [ 1s] [1/57] preinstalling tizen-release... [ 1s] [2/57] preinstalling libgcc... [ 1s] [3/57] preinstalling setup... [ 1s] [4/57] preinstalling filesystem... [ 1s] [5/57] preinstalling eglibc... [ 1s] [6/57] preinstalling eglibc-common... [ 1s] [7/57] preinstalling bash... [ 1s] [8/57] preinstalling bzip2-libs... [ 1s] [9/57] preinstalling diffutils... [ 1s] [10/57] preinstalling elfutils-libelf... [ 1s] [11/57] preinstalling libattr... [ 1s] [12/57] preinstalling liblua... [ 1s] [13/57] preinstalling libstdc++... [ 1s] [14/57] preinstalling ncurses-libs... [ 1s] [15/57] preinstalling nspr... [ 1s] [16/57] preinstalling nss-softokn-freebl... [ 1s] [17/57] preinstalling popt... [ 1s] [18/57] preinstalling readline... [ 1s] [19/57] preinstalling sed... [ 1s] [20/57] preinstalling sqlite... [ 1s] [21/57] preinstalling tar... [ 1s] [22/57] preinstalling xz-libs... [ 1s] [23/57] preinstalling zlib... [ 1s] [24/57] preinstalling qemu.x86_64... [ 2s] [25/57] preinstalling libcap... [ 2s] [26/57] preinstalling libacl... [ 2s] [27/57] preinstalling libfile... [ 2s] [28/57] preinstalling bzip2... [ 2s] [29/57] preinstalling nss... [ 2s] [30/57] preinstalling file... [ 2s] [31/57] preinstalling coreutils... [ 2s] [32/57] preinstalling rpm-libs... [ 2s] [33/57] preinstalling tizen-accelerator... [ 2s] [34/57] preinstalling rpm... [ 2s] [35/57] preinstalling gmp-x86-arm... [ 2s] [36/57] preinstalling mpc-x86-arm... [ 2s] [37/57] preinstalling mpfr-x86-arm... [ 2s] [38/57] preinstalling bzip2-libs-x86-arm... [ 2s] [39/57] preinstalling eglibc-x86-arm... [ 2s] [40/57] preinstalling elfutils-libelf-x86-arm... [ 2s] [41/57] preinstalling libacl-x86-arm... [ 2s] [42/57] preinstalling libattr-x86-arm... [ 2s] [43/57] preinstalling libcap-x86-arm... [ 2s] [44/57] preinstalling libfile-x86-arm... [ 2s] [45/57] preinstalling libgcc-x86-arm... [ 2s] [46/57] preinstalling liblua-x86-arm... [ 2s] [47/57] preinstalling ncurses-libs-x86-arm... [ 2s] [48/57] preinstalling nspr-x86-arm... [ 2s] [49/57] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [50/57] preinstalling nss-x86-arm... [ 2s] [51/57] preinstalling popt-x86-arm... [ 2s] [52/57] preinstalling rpm-libs-x86-arm... [ 2s] [53/57] preinstalling sqlite-x86-arm... [ 2s] [54/57] preinstalling xz-libs-x86-arm... [ 2s] [55/57] preinstalling zlib-x86-arm... [ 3s] [56/57] preinstalling bash-x86-arm... [ 3s] [57/57] preinstalling rpm-x86-arm... [ 3s] [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl-libs -> perl [ 3s] [1/8] preinstalling e2fsprogs-libs... [ 3s] [2/8] preinstalling libpcre... [ 3s] [3/8] preinstalling libuuid... [ 3s] [4/8] preinstalling grep... [ 3s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 3s] copying packages... [ 4s] reordering...cycle: bash -> eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> bash [ 4s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 4s] breaking dependency eglibc-common -> coreutils [ 4s] cycle: eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> findutils [ 4s] breaking dependency eglibc-common -> findutils [ 4s] cycle: eglibc -> eglibc-common -> grep [ 4s] breaking dependency grep -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 4s] breaking dependency grep -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 4s] breaking dependency libpcre -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 4s] breaking dependency libpcre -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 4s] breaking dependency libstdc++ -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 4s] breaking dependency eglibc-common -> grep [ 4s] cycle: eglibc -> eglibc-common -> libgcc [ 4s] breaking dependency eglibc -> eglibc-common [ 4s] cycle: eglibc -> libgcc [ 4s] breaking dependency libgcc -> eglibc [ 4s] cycle: filesystem -> setup [ 4s] breaking dependency setup -> filesystem [ 4s] cycle: ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses [ 4s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses-base [ 4s] cycle: perl -> perl-libs [ 4s] breaking dependency perl -> perl-libs [ 4s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 4s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl -> perl-IO-Compress-Zlib [ 4s] breaking dependency perl -> perl-IO-Compress-Zlib [ 4s] cycle: perl -> perl-IO-Compress-Base [ 4s] breaking dependency perl -> perl-IO-Compress-Base [ 4s] cycle: perl -> perl-Module-Pluggable [ 4s] breaking dependency perl -> perl-Module-Pluggable [ 4s] cycle: perl -> perl-Pod-Simple [ 4s] breaking dependency perl -> perl-Pod-Simple [ 4s] cycle: dbus-libs -> dbus [ 4s] breaking dependency dbus -> dbus-libs [ 4s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 4s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 4s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 4s] cycle: nss -> nss-sysinit [ 4s] breaking dependency nss -> nss-sysinit [ 4s] cycle: perl-CPAN -> perl-Test-Harness [ 4s] breaking dependency perl-Test-Harness -> perl-CPAN [ 4s] cycle: rpm-libs -> rpm [ 4s] breaking dependency rpm-libs -> rpm [ 4s] done [ 5s] booting kvm ... [ 5s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 16000 -drive file=/srv/build/root_1/root,if=virtio,cache=none -drive file=/srv/build/root_1/root,if=ide,index=0,cache=none -drive file=/srv/build/root_1/swap,if=virtio,cache=none -smp 8 [ 10s] doing fast boot [ 10s] Creating device nodes with udev [ 10s] Waiting for device /dev/vda to appear: ok [ 10s] fsck from util-linux 2.21.2 [ 10s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 10s] /dev/vda: clean, 4790/2392064 files, 244387/9568256 blocks [ 10s] fsck succeeded. Mounting root device read-write. [ 10s] Mounting root /dev/vda [ 10s] mount -o rw -t ext4 /dev/vda /root [ 10s] replacing /etc/mtab with symlink to /proc/self/mounts [ 10s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 11s] 2nd stage started in virtual machine [ 11s] machine type: armv7l [ 11s] switching personality to 8... [ 11s] 2nd stage started in virtual machine [ 11s] machine type: armv7l [ 11s] /.build/build: line 770: mount: command not found [ 11s] swapon on /dev/vdb [ 12s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 12s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 19s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 19s] logging output to //.build.log... [ 19s] processing specfile /.build-srcdir/_service:gbs:capi-system-device.spec ... [ 19s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:capi-system-device.spec build rpmlint-Factory ... [ 20s] running rpm-x86-arm postinstall script [ 20s] running rpm-libs-x86-arm postinstall script [ 21s] running tizen-accelerator postinstall script [ 27s] running bash-x86-arm postinstall script [ 27s] initializing rpm db... [ 33s] [1/192] installing cross-armv7l-platformfile-0.0.1-1.1 [ 33s] [2/192] installing kernel-headers-linux-3.0-3.0.101-1.2 [ 34s] [3/192] installing libX11-common-1.5.0-1.1 [ 34s] [4/192] installing tizen-release-2.2.0-1.1 [ 34s] [5/192] installing tzdata-2013h-1.1 [ 34s] [6/192] installing libgcc-4.6.4-1.15 [ 34s] [7/192] installing setup-0.1-1.1 [ 35s] [8/192] installing filesystem-0.1-1.1 [ 35s] warning: group lock does not exist - using root [ 35s] [9/192] installing eglibc-2.13-1.11 [ 35s] [10/192] installing libstdc++-4.6.4-1.15 [ 36s] [11/192] installing eglibc-common-2.13-1.11 [ 36s] [12/192] installing iniparser-2.17-1.1 [ 36s] [13/192] installing libstdc++-devel-4.6.4-1.15 [ 36s] [14/192] installing opengl-es-virtual-drv-0.1.6-1.4 [ 36s] [15/192] installing bash-4.1-1.1 [ 37s] [16/192] installing bzip2-libs-1.0.5-1.2 [ 37s] [17/192] installing capi-base-common-0.1.7-1.1 [ 37s] [18/192] installing cpio-2.8-1.1 [ 37s] [19/192] installing diffutils-3.0-1.1 [ 37s] [20/192] installing e2fsprogs-libs-1.41.9-1.2 [ 37s] [21/192] installing elfutils-libelf-0.152-1.9 [ 37s] [22/192] installing expat-2.0.1-1.2 [ 38s] [23/192] installing fdupes-1.40-1.1 [ 38s] [24/192] installing findutils-4.2.31-1.1 [ 38s] [25/192] installing fribidi-0.19.6-1.1 [ 38s] [26/192] installing gdbm-1.8.3-1.3 [ 38s] [27/192] installing libXau-1.0.7-1.1 [ 38s] [28/192] installing libattr-2.4.44-1.2 [ 38s] [29/192] installing libffi-3.0.9-1.1 [ 38s] [30/192] installing libgomp-4.6.4-1.15 [ 38s] [31/192] installing libjpeg-turbo-1.2.0-1.1 [ 39s] [32/192] installing liblua-5.1.4-1.2 [ 39s] [33/192] installing libuuid-2.20.2-1.1 [ 39s] [34/192] installing lzo-2.03-1.3 [ 39s] [35/192] installing m4-1.4.14-1.1 [ 39s] [36/192] installing net-tools-1.60-1.2 [ 39s] [37/192] installing nspr-4.9-1.10 [ 40s] [38/192] installing nss-softokn-freebl-3.12.9-1.13 [ 40s] [39/192] installing openssl-1.0.1k-1.6 [ 40s] [40/192] installing patch-2.6-1.1 [ 40s] [41/192] installing pixman-0.28.2-1.1 [ 40s] [42/192] installing pkg-config-0.25-1.2 [ 40s] [43/192] installing popt-1.16-1.2 [ 40s] [44/192] installing readline-5.2-1.2 [ 40s] [45/192] installing sed-4.1.5-1.1 [ 41s] [46/192] installing smack-1.0+s14-2.1 [ 41s] [47/192] installing sqlite-3.7.13-1.2 [ 41s] [48/192] installing tar-1.17-1.2 [ 41s] [49/192] installing xz-libs-5.0.3-1.3 [ 55s] [50/192] installing zlib-1.2.5-1.10 [ 64s] [51/192] installing gmp-4.2.1-1.2 [ 65s] [52/192] installing libpcre-7.7-1.3 [ 65s] [53/192] installing ncurses-libs-5.7-1.2 [ 66s] [54/192] installing build-compare-2009.10.14-1.5 [ 66s] [55/192] installing qemu.x86_64-1.2-2.1 [ 68s] [56/192] installing vconf-internal-keys-devel-0.0.150-1.1 [ 68s] [57/192] installing capi-base-common-devel-0.1.7-1.1 [ 68s] [58/192] installing eglibc-headers-2.13-1.11 [ 68s] [59/192] installing libcap-2.21-1.2 [ 68s] [60/192] installing unzip-6.0-1.7 [ 68s] [61/192] installing zlib-devel-1.2.5-1.10 [ 68s] [62/192] installing freetype-2.4.9-1.1 [ 69s] [63/192] installing grep-2.5.1a-1.1 [ 69s] [64/192] installing libacl-2.2.49-1.2 [ 69s] [65/192] installing libfile-5.04-1.2 [ 69s] [66/192] installing libpng-1.2.50-1.1 [ 69s] [67/192] installing libxcb-1.8.1-1.1 [ 69s] [68/192] installing libxml2-2.7.8-1.2 [ 69s] [69/192] installing lzo-minilzo-2.03-1.3 [ 70s] [70/192] installing make-3.82-1.2 [ 71s] [71/192] installing mpfr-3.0.0-1.2 [ 71s] [72/192] installing ncurses-5.7-1.2 [ 72s] [73/192] installing systemd-libs-210-3.2 [ 72s] [74/192] installing bzip2-1.0.5-1.2 [ 72s] [75/192] installing glib2-2.32.3-1.2 [ 73s] [76/192] installing kmod-libs-15-1.1 [ 73s] [77/192] installing libblkid-2.20.2-1.1 [ 73s] [78/192] installing libicu-51-1.2 [ 75s] [79/192] installing smack-utils-1.0+s14-2.1 [ 75s] [80/192] installing xz-5.0.3-1.3 [ 75s] [81/192] installing binutils-2.22-1.5 [ 76s] [82/192] installing elfutils-libs-0.152-1.9 [ 76s] [83/192] installing nss-3.12.9-1.13 [ 76s] [84/192] installing perl-5.12.1-1.4 [ 77s] [85/192] installing ncurses-base-5.7-1.2 [ 77s] [86/192] installing perl-HTML-Tagset-3.20-1.1 [ 77s] [87/192] installing perl-IO-Compress-Base-2.008-1.4 [ 77s] [88/192] installing perl-Module-Pluggable-3.60-1.4 [ 77s] [89/192] installing perl-Pod-Escapes-1.04-1.4 [ 77s] [90/192] installing perl-TimeDate-1.20-1.1 [ 78s] [91/192] installing eglibc-devel-2.13-1.11 [ 78s] [92/192] installing file-5.04-1.2 [ 78s] [93/192] installing lzo-devel-2.03-1.3 [ 78s] [94/192] installing perl-Compress-Raw-Zlib-2.008-1.4 [ 78s] [95/192] installing perl-devel-5.12.1-1.4 [ 78s] [96/192] installing perl-libs-5.12.1-1.4 [ 78s] [97/192] installing coreutils-6.9-1.5 [ 78s] [98/192] installing libX11-1.5.0-1.1 [ 78s] [99/192] installing libdlog-0.4.1-1.1 [ 79s] [100/192] installing libmount-2.20.2-1.1 [ 79s] [101/192] installing mpc-0.9-1.2 [ 79s] [102/192] installing xz-lzma-compat-5.0.3-1.3 [ 79s] [103/192] installing elfutils-0.152-1.9 [ 79s] [104/192] installing harfbuzz-0.9.7-2.1 [ 79s] [105/192] installing nss-sysinit-3.12.9-1.13 [ 79s] [106/192] installing libarchive-2.8.3-1.1 [ 79s] [107/192] installing rpm-libs-4.9.1-1.1 [ 80s] [108/192] installing perl-ExtUtils-ParseXS-2.18-1.4 [ 80s] [109/192] installing perl-Pod-Simple-3.07-1.4 [ 80s] [110/192] installing perl-Test-Simple-0.80-1.4 [ 80s] [111/192] installing tizen-accelerator-1.0.1-1.1 [ 80s] [112/192] installing eina-1.7.1+svn.77445+build35-2.1 [ 80s] [113/192] installing giflib-4.1.6-1.1 [ 80s] [114/192] installing libXext-1.3.1-1.1 [ 80s] [115/192] installing libXrender-0.9.7-1.1 [ 81s] [116/192] installing libdlog-devel-0.4.1-1.1 [ 81s] [117/192] installing perl-IO-Compress-Zlib-2.008-1.4 [ 81s] [118/192] installing perl-Test-Harness-3.12-1.4 [ 81s] [119/192] installing gawk-3.1.5-1.4 [ 81s] [120/192] installing gzip-1.3.12-1.1 [ 81s] [121/192] installing libcryptsvc-0.0.1-1.1 [ 81s] [122/192] installing build-2011.01.10a-1.1 [ 81s] [123/192] installing rpm-4.9.1-1.1 [ 82s] [124/192] installing cpp-4.6.4-1.15 [ 82s] [125/192] installing dbus-1.6.4-1.1 [ 82s] [126/192] installing util-linux-2.20.2-1.1 [ 82s] [127/192] installing cmake-2.8.5-1.1 [ 82s] [128/192] installing fontconfig-2.9.0-1.1 [ 85s] /opt/var/cache/fontconfig/*: No such file or directory [ 85s] [129/192] installing glib2-devel-2.32.3-1.2 [ 86s] [130/192] installing bzip2-libs-x86-arm-1.0.5-1.1 [ 86s] [131/192] installing dbus-libs-1.6.4-1.1 [ 86s] [132/192] installing eglibc-x86-arm-2.13-1.2 [ 87s] [133/192] installing elfutils-libelf-x86-arm-0.152-1.1 [ 87s] [134/192] installing elfutils-libs-x86-arm-0.152-1.2 [ 87s] [135/192] installing gmp-x86-arm-4.2.1-1.1 [ 87s] [136/192] installing libacl-x86-arm-2.2.49-1.1 [ 87s] [137/192] installing libattr-x86-arm-2.4.44-1.1 [ 87s] [138/192] installing libcap-x86-arm-2.21-1.1 [ 87s] [139/192] installing libfile-x86-arm-5.04-1.2 [ 88s] [140/192] installing libgcc-x86-arm-4.6.4-1.1 [ 88s] [141/192] installing liblua-x86-arm-5.1.4-1.1 [ 88s] [142/192] installing mpc-x86-arm-0.9-1.1 [ 88s] [143/192] installing mpfr-x86-arm-3.0.0-1.1 [ 88s] [144/192] installing ncurses-libs-x86-arm-5.7-1.2 [ 88s] [145/192] installing nspr-x86-arm-4.9-1.2 [ 88s] [146/192] installing nss-softokn-freebl-x86-arm-3.12.9-1.2 [ 89s] [147/192] installing nss-x86-arm-3.12.9-1.2 [ 89s] [148/192] installing perl-ExtUtils-MakeMaker-6.36-1.4 [ 89s] [149/192] installing popt-x86-arm-1.16-1.1 [ 89s] [150/192] installing rpm-libs-x86-arm-4.9.1-1.2 [ 89s] [151/192] installing sqlite-x86-arm-3.7.13-1.1 [ 89s] [152/192] installing xz-libs-x86-arm-5.0.3-1.1 [ 89s] [153/192] installing zlib-x86-arm-1.2.5-1.1 [ 89s] [154/192] installing ecore-1.7.1+svn.77580+build125-2.1 [ 90s] [155/192] installing eet-1.7.1+svn.77495+build14-2.1 [ 90s] [156/192] installing capi-system-info-0.2.0-1.2 [ 90s] [157/192] installing systemd-210-3.2 [ 95s] [158/192] installing gcc-4.6.4-1.15 [ 96s] [159/192] installing rpm-build-4.9.1-1.1 [ 96s] [160/192] installing capi-system-info-devel-0.2.0-1.2 [ 96s] [161/192] installing dbus-devel-1.6.4-1.1 [ 96s] [162/192] installing perl-CPAN-1.9205-1.4 [ 96s] [163/192] installing bash-x86-arm-4.1-1.1 [ 96s] [164/192] installing dbus-glib-0.100-1.1 [ 97s] [165/192] installing fdupes-x86-arm-1.40-1.1 [ 97s] [166/192] installing findutils-x86-arm-4.2.31-1.1 [ 97s] [167/192] installing gawk-x86-arm-3.1.5-1.2 [ 97s] [168/192] installing gzip-x86-arm-1.3.12-1.1 [ 97s] [169/192] installing make-x86-arm-3.82-1.1 [ 97s] [170/192] installing sed-x86-arm-4.1.5-1.1 [ 97s] [171/192] installing tar-x86-arm-1.17-1.2 [ 98s] [172/192] installing diffutils-x86-arm-3.0-1.1 [ 98s] [173/192] installing patch-x86-arm-2.6-1.1 [ 98s] [174/192] installing autoconf-2.68-1.1 [ 98s] [175/192] installing coreutils-x86-arm-6.9-1.1 [ 100s] [176/192] installing file-x86-arm-5.04-1.1 [ 101s] [177/192] installing vconf-0.2.83-1.1 [ 101s] Failed to get D-Bus connection: Unknown error 4294967295 [ 101s] warning: %post(vconf-0.2.83-1.1.armv7l) scriptlet failed, exit status 1 [ 101s] [178/192] installing elfutils-x86-arm-0.152-1.2 [ 101s] [179/192] installing gcc-c++-4.6.4-1.15 [ 101s] [180/192] installing evas-1.7.1+svn.77561+build187-2.2 [ 101s] [181/192] installing rpm-x86-arm-4.9.1-1.2 [ 101s] /bin/rpm.orig-arm already present - skipping. [ 101s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 101s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 101s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 101s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 101s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 101s] [182/192] installing rpm-build-x86-arm-4.9.1-1.2 [ 102s] [183/192] installing vconf-keys-devel-0.2.83-1.1 [ 102s] [184/192] installing automake-1.11.1-1.1 [ 102s] [185/192] installing edbus-1.6.0+svn.76526slp2+build10-1.1 [ 102s] [186/192] installing cross-armv7l-gcc-accel-x86-armv7l-4.6.4-1.4 [ 103s] "GCCVER: 4.6.4 GCCVER_NEW: 4.6.4 " [ 103s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 103s] [187/192] installing dbus-glib-devel-0.100-1.1 [ 103s] [188/192] installing libtool-2.2.6b-1.2 [ 103s] [189/192] installing vconf-devel-0.2.83-1.1 [ 103s] [190/192] installing cross-armv7l-binutils-accel-x86-armv7l-2.22-1.4 [ 104s] [191/192] installing libdeviced-1.0.0-1.1 [ 104s] [192/192] installing libdeviced-devel-1.0.0-1.1 [ 104s] removing nis flags from //etc/nsswitch.conf... [ 104s] now finalizing build dir... [ 105s] /.build/build: line 2585: mount: command not found [ 105s] /.build/build: line 2586: mount: command not found [ 108s] build target is armv7l-tizen-linux [ 108s] ----------------------------------------------------------------- [ 108s] I have the following modifications for capi-system-device.spec: [ 108s] 5c5 [ 108s] < Release: 18 [ 108s] --- [ 108s] > Release: 1.4 [ 108s] ----------------------------------------------------------------- [ 108s] ----- building capi-system-device.spec (user abuild) [ 108s] ----------------------------------------------------------------- [ 108s] ----------------------------------------------------------------- [ 108s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.3:Mobile/target/2bc7a9a5cf40c0c401651744a8c6f221-capi-system-device' /home/abuild/rpmbuild/SOURCES/capi-system-device.spec [ 108s] Building target platforms: armv7l-tizen-linux [ 108s] Building for target armv7l-tizen-linux [ 108s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.sTU0Y6 [ 108s] + umask 022 [ 108s] + cd /home/abuild/rpmbuild/BUILD [ 108s] + LANG=C [ 108s] + export LANG [ 108s] + unset DISPLAY [ 108s] + cd /home/abuild/rpmbuild/BUILD [ 108s] + rm -rf capi-system-device-0.1.0 [ 108s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/capi-system-device-0.1.0.tar.gz [ 108s] + /bin/tar -xf - [ 108s] + STATUS=0 [ 108s] + '[' 0 -ne 0 ']' [ 108s] + cd capi-system-device-0.1.0 [ 108s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 108s] + exit 0 [ 108s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.AlFDC1 [ 108s] + umask 022 [ 108s] + cd /home/abuild/rpmbuild/BUILD [ 108s] + cd capi-system-device-0.1.0 [ 108s] + LANG=C [ 108s] + export LANG [ 108s] + unset DISPLAY [ 108s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 108s] + export CFLAGS [ 108s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 108s] + export CXXFLAGS [ 108s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 108s] + export FFLAGS [ 108s] + LD_AS_NEEDED=1 [ 108s] + export LD_AS_NEEDED [ 108s] + export 'CFLAGS+= -DTIZEN_ENGINEER_MODE' [ 108s] + CFLAGS+=' -DTIZEN_ENGINEER_MODE' [ 108s] + cp /home/abuild/rpmbuild/SOURCES/capi-system-device.manifest . [ 108s] ++ echo 0.1.0 [ 108s] ++ awk 'BEGIN {FS="."}{print $1}' [ 108s] + MAJORVER=0 [ 108s] + cmake . -DCMAKE_INSTALL_PREFIX=/usr -DFULLVER=0.1.0 -DMAJORVER=0 [ 109s] -- The C compiler identification is GNU [ 109s] -- The CXX compiler identification is GNU [ 109s] -- Check for working C compiler: /usr/bin/gcc [ 109s] -- Check for working C compiler: /usr/bin/gcc -- works [ 109s] -- Detecting C compiler ABI info [ 109s] -- Detecting C compiler ABI info - done [ 110s] -- Check for working CXX compiler: /usr/bin/c++ [ 110s] -- Check for working CXX compiler: /usr/bin/c++ -- works [ 110s] -- Detecting CXX compiler ABI info [ 110s] -- Detecting CXX compiler ABI info - done [ 111s] -- checking for module 'deviced dlog vconf dbus-1 dbus-glib-1 capi-base-common capi-system-info' [ 111s] -- found deviced dlog vconf dbus-1 dbus-glib-1 capi-base-common capi-system-info, version 0.1.0;1.0;0.2.45;1.6.4;0.100;0.1.7 [ 111s] -- Configuring done [ 112s] -- Generating done [ 112s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/capi-system-device-0.1.0 [ 112s] + make -j8 [ 112s] Scanning dependencies of target capi-system-device [ 112s] [ 20%] [ 30%] [ 50%] [ 50%] [ 50%] [ 60%] [ 70%] [ 80%] Building C object CMakeFiles/capi-system-device.dir/src/device.c.o [ 112s] Building C object CMakeFiles/capi-system-device.dir/src/haptic.c.o [ 112s] Building C object CMakeFiles/capi-system-device.dir/src/battery.c.o [ 112s] Building C object CMakeFiles/capi-system-device.dir/src/dbus.c.o [ 112s] Building C object CMakeFiles/capi-system-device.dir/src/power.c.o [ 112s] Building C object CMakeFiles/capi-system-device.dir/src/display.c.o [ 112s] Building C object CMakeFiles/capi-system-device.dir/src/led.c.o [ 112s] Building C object CMakeFiles/capi-system-device.dir/src/cpu.c.o [ 112s] [ 90%] [100%] Building C object CMakeFiles/capi-system-device.dir/src/callback.c.o [ 112s] Building C object CMakeFiles/capi-system-device.dir/src/memory.c.o [ 112s] Linking C shared library libcapi-system-device.so [ 112s] [100%] Built target capi-system-device [ 112s] + exit 0 [ 112s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.5HJ2y8 [ 112s] + umask 022 [ 112s] + cd /home/abuild/rpmbuild/BUILD [ 112s] + cd capi-system-device-0.1.0 [ 112s] + LANG=C [ 112s] + export LANG [ 112s] + unset DISPLAY [ 112s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-1.4.arm [ 112s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-1.4.arm [ 112s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-1.4.arm [ 112s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-1.4.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-1.4.arm install [ 113s] [100%] Built target capi-system-device [ 113s] Install the project... [ 113s] -- Install configuration: "" [ 113s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-1.4.arm/usr/lib/libcapi-system-device.so.0.1.0 [ 113s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-1.4.arm/usr/lib/libcapi-system-device.so.0 [ 113s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-1.4.arm/usr/lib/libcapi-system-device.so [ 113s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-1.4.arm/usr/include/system/device.h [ 113s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-1.4.arm/usr/include/system/device-error.h [ 113s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-1.4.arm/usr/include/device [ 113s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-1.4.arm/usr/include/device/callback.h [ 113s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-1.4.arm/usr/include/device/haptic.h [ 113s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-1.4.arm/usr/include/device/led.h [ 113s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-1.4.arm/usr/include/device/display.h [ 113s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-1.4.arm/usr/include/device/device-error.h [ 113s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-1.4.arm/usr/include/device/battery.h [ 113s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-1.4.arm/usr/include/device/power.h [ 113s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-1.4.arm/usr/lib/pkgconfig/capi-system-device.pc [ 113s] + rm -f /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-1.4.arm/usr/share/info/dir [ 113s] + find /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-1.4.arm -regex '.*\.la$' [ 113s] + xargs rm -f -- [ 113s] + find /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-1.4.arm -regex '.*\.a$' [ 113s] + xargs rm -f -- [ 113s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-1.4.arm/usr/share/license [ 113s] + cp LICENSE /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-1.4.arm/usr/share/license/capi-system-device [ 113s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/capi-system-device-0.1.0 [ 113s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-1.4.arm/usr/lib/libcapi-system-device.so.0.1.0 [ 113s] symlinked /usr/lib/debug/usr/lib/libcapi-system-device.so.0.1.0.debug to /usr/lib/debug/usr/lib/libcapi-system-device.so.0.debug [ 113s] symlinked /usr/lib/debug/usr/lib/libcapi-system-device.so.0.1.0.debug to /usr/lib/debug/usr/lib/libcapi-system-device.so.debug [ 113s] 190 blocks [ 113s] + /usr/lib/rpm/check-buildroot [ 113s] + /usr/lib/rpm//brp-compress [ 113s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 113s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 113s] + /usr/lib/rpm/brp-python-hardlink [ 113s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-1.4.arm [ 113s] Processing files: capi-system-device-0.1.0-1.4.armv7l [ 113s] Aptk: PG1hbmlmZXN0Pgo8cmVxdWVzdD4KCTxkb21haW4gIG5hbWU9Il8iLz4KPC9yZXF1 [ 113s] ZXN0Pgo8L21hbmlmZXN0Pgo= [ 113s] [ 113s] Provides: libcapi-system-device.so.0 [ 113s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 113s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 113s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 113s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 114s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libcapi-system-info.so.0 libdbus-1.so.3 libdbus-glib-1.so.2 libdeviced.so.0.1.0 libdlog.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libglib-2.0.so.0 libpthread.so.0 libpthread.so.0(GLIBC_2.4) libvconf.so.0 [ 114s] Processing files: capi-system-device-devel-0.1.0-1.4.armv7l [ 114s] Provides: pkgconfig(capi-system-device) [ 114s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 114s] Requires: /usr/bin/pkg-config libcapi-system-device.so.0 pkgconfig(capi-base-common) [ 114s] Processing files: capi-system-device-debuginfo-0.1.0-1.4.armv7l [ 114s] Processing files: capi-system-device-debugsource-0.1.0-1.4.armv7l [ 114s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-1.4.arm [ 114s] Wrote: /home/abuild/rpmbuild/SRPMS/capi-system-device-0.1.0-1.4.src.rpm [ 114s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-device-0.1.0-1.4.armv7l.rpm [ 114s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-device-devel-0.1.0-1.4.armv7l.rpm [ 114s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-device-debuginfo-0.1.0-1.4.armv7l.rpm [ 114s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-device-debugsource-0.1.0-1.4.armv7l.rpm [ 114s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.xHC778 [ 114s] + umask 022 [ 114s] + cd /home/abuild/rpmbuild/BUILD [ 114s] + cd capi-system-device-0.1.0 [ 114s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-1.4.arm [ 114s] + exit 0 [ 114s] ... checking for files with abuild user/group [ 114s] ... creating baselibs [ 115s] ... comparing built packages with the former built [ 115s] /usr/lib/build/rpm-check.sh [ 115s] compare /.build.oldpackages/capi-system-device-0.1.0-1.3.src.rpm /home/abuild/rpmbuild/SRPMS/capi-system-device-0.1.0-1.4.src.rpm [ 115s] compare /.build.oldpackages/capi-system-device-0.1.0-1.3.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-system-device-0.1.0-1.4.armv7l.rpm [ 115s] /usr/lib/libcapi-system-device.so.0.1.0 differs in assembler output [ 115s] --- /tmp/tmp.fougX3jDC9 2015-02-06 05:46:51.858622441 +0000 [ 115s] +++ /tmp/tmp.P2MEDa9Erz 2015-02-06 05:46:51.882622442 +0000 [ 115s] @@ -16,213 +16,213 @@ [ 115s] ldr lr, [pc, # ] ; <_init + ofs> [ 115s] add lr, pc, lr [ 115s] ldr pc, [lr, # ]! [ 115s] - ; instruction: 0x0000b2b8 [ 115s] + ; instruction: 0x0000b2b4 [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x2b8 [ 115s] + ldr pc, [ip, # ]! ; 0x2b4 [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x2b0 [ 115s] + ldr pc, [ip, # ]! ; 0x2ac [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x2a8 [ 115s] + ldr pc, [ip, # ]! ; 0x2a4 [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x2a0 [ 115s] + ldr pc, [ip, # ]! ; 0x29c [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x298 [ 115s] + ldr pc, [ip, # ]! ; 0x294 [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x290 [ 115s] + ldr pc, [ip, # ]! ; 0x28c [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x288 [ 115s] + ldr pc, [ip, # ]! ; 0x284 [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x280 [ 115s] + ldr pc, [ip, # ]! ; 0x27c [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x278 [ 115s] + ldr pc, [ip, # ]! ; 0x274 [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x270 [ 115s] + ldr pc, [ip, # ]! ; 0x26c [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x268 [ 115s] + ldr pc, [ip, # ]! ; 0x264 [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x260 [ 115s] + ldr pc, [ip, # ]! ; 0x25c [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x258 [ 115s] + ldr pc, [ip, # ]! ; 0x254 [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x250 [ 115s] + ldr pc, [ip, # ]! ; 0x24c [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x248 [ 115s] + ldr pc, [ip, # ]! ; 0x244 [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x240 [ 115s] + ldr pc, [ip, # ]! ; 0x23c [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x238 [ 115s] + ldr pc, [ip, # ]! ; 0x234 [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x230 [ 115s] + ldr pc, [ip, # ]! ; 0x22c [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x228 [ 115s] + ldr pc, [ip, # ]! ; 0x224 [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x220 [ 115s] + ldr pc, [ip, # ]! ; 0x21c [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x218 [ 115s] + ldr pc, [ip, # ]! ; 0x214 [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x210 [ 115s] + ldr pc, [ip, # ]! ; 0x20c [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x208 [ 115s] + ldr pc, [ip, # ]! ; 0x204 [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x200 [ 115s] + ldr pc, [ip, # ]! ; 0x1fc [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x1f8 [ 115s] + ldr pc, [ip, # ]! ; 0x1f4 [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x1f0 [ 115s] + ldr pc, [ip, # ]! ; 0x1ec [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x1e8 [ 115s] + ldr pc, [ip, # ]! ; 0x1e4 [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x1e0 [ 115s] + ldr pc, [ip, # ]! ; 0x1dc [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x1d8 [ 115s] + ldr pc, [ip, # ]! ; 0x1d4 [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x1d0 [ 115s] + ldr pc, [ip, # ]! ; 0x1cc [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x1c8 [ 115s] + ldr pc, [ip, # ]! ; 0x1c4 [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x1c0 [ 115s] + ldr pc, [ip, # ]! ; 0x1bc [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x1b8 [ 115s] + ldr pc, [ip, # ]! ; 0x1b4 [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x1b0 [ 115s] + ldr pc, [ip, # ]! ; 0x1ac [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x1a8 [ 115s] + ldr pc, [ip, # ]! ; 0x1a4 [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x1a0 [ 115s] + ldr pc, [ip, # ]! ; 0x19c [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x198 [ 115s] + ldr pc, [ip, # ]! ; 0x194 [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x190 [ 115s] + ldr pc, [ip, # ]! ; 0x18c [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x188 [ 115s] + ldr pc, [ip, # ]! ; 0x184 [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x180 [ 115s] + ldr pc, [ip, # ]! ; 0x17c [ 115s] ; instruction: 0x46c04778 [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x174 [ 115s] + ldr pc, [ip, # ]! ; 0x170 [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x16c [ 115s] + ldr pc, [ip, # ]! ; 0x168 [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x164 [ 115s] + ldr pc, [ip, # ]! ; 0x160 [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x15c [ 115s] + ldr pc, [ip, # ]! ; 0x158 [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x154 [ 115s] + ldr pc, [ip, # ]! ; 0x150 [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x14c [ 115s] + ldr pc, [ip, # ]! ; 0x148 [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x144 [ 115s] + ldr pc, [ip, # ]! ; 0x140 [ 115s] add ip, pc, # [ 115s] add ip, ip, # ; 0xb000 [ 115s] - ldr pc, [ip, # ]! ; 0x13c [ 115s] compare /.build.oldpackages/capi-system-device-debuginfo-0.1.0-1.3.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-system-device-debuginfo-0.1.0-1.4.armv7l.rpm [ 115s] --- /tmp/tmp.jLWZQiythX 2015-02-06 05:46:52.070622449 +0000 [ 115s] +++ /tmp/tmp.KNFBzp9egt 2015-02-06 05:46:52.082622450 +0000 [ 115s] @@ -1,8 +1,8 @@ [ 115s] /usr/lib/debug/ 0 (none) 40755 root root 0 4294967295 [ 115s] /usr/lib/debug/.build-id/ 0 (none) 40755 root root 0 4294967295 [ 115s] -/usr/lib/debug/.build-id/f4/ 0 (none) 40755 root root 0 4294967295 [ 115s] -/usr/lib/debug/.build-id/f4/6e5c3c2140e7861f67d13d9db3774a76b5c09a 0 (none) 120777 root root 0 4294967295 ../../../libcapi-system-device.so.0.1.0 [ 115s] -/usr/lib/debug/.build-id/f4/6e5c3c2140e7861f67d13d9db3774a76b5c09a.debug 0 (none) 120777 root root 0 4294967295 ../../usr/lib/libcapi-system-device.so.0.1.0.debug [ 115s] +/usr/lib/debug/.build-id/2e/ 0 (none) 40755 root root 0 4294967295 [ 115s] +/usr/lib/debug/.build-id/2e/974d1343291b97632c4c4710deccc0840f6e99 0 (none) 120777 root root 0 4294967295 ../../../libcapi-system-device.so.0.1.0 [ 115s] +/usr/lib/debug/.build-id/2e/974d1343291b97632c4c4710deccc0840f6e99.debug 0 (none) 120777 root root 0 4294967295 ../../usr/lib/libcapi-system-device.so.0.1.0.debug [ 115s] /usr/lib/debug/usr/ 0 (none) 40755 root root 0 4294967295 [ 115s] /usr/lib/debug/usr/lib/ 0 (none) 40755 root root 0 4294967295 [ 115s] /usr/lib/debug/usr/lib/libcapi-system-device.so.0.1.0.debug 0 (none) 100755 root root 0 4294967295 [ 115s] RPM meta information is different [ 115s] compare /.build.oldpackages/capi-system-device-debugsource-0.1.0-1.3.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-system-device-debugsource-0.1.0-1.4.armv7l.rpm [ 116s] compare /.build.oldpackages/capi-system-device-devel-0.1.0-1.3.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-system-device-devel-0.1.0-1.4.armv7l.rpm [ 116s] ... saving built statistics [ 116s] /.build/build: line 3144: mount: command not found [ 116s] ERROR: no root disk device found, yet another new device name? [ 116s] ls: cannot access /sys/block/: No such file or directory [ 116s] /.build/build: line 3159: umount: command not found [ 116s] ... saving built packages [ 116s] /home/abuild/rpmbuild/RPMS/armv7l/capi-system-device-0.1.0-1.4.armv7l.rpm [ 116s] /home/abuild/rpmbuild/RPMS/armv7l/capi-system-device-debuginfo-0.1.0-1.4.armv7l.rpm [ 116s] /home/abuild/rpmbuild/RPMS/armv7l/capi-system-device-debugsource-0.1.0-1.4.armv7l.rpm [ 116s] /home/abuild/rpmbuild/RPMS/armv7l/capi-system-device-devel-0.1.0-1.4.armv7l.rpm [ 116s] /home/abuild/rpmbuild/SRPMS/capi-system-device-0.1.0-1.4.src.rpm [ 116s] /home/abuild/rpmbuild/OTHER/_statistics [ 116s] [ 116s] w03 finished "build capi-system-device.spec" at Fri Feb 6 05:46:52 UTC 2015. [ 116s] [ 119s] [ 110.327213] SysRq : Power Off [ 119s] [ 110.444507] Power down. [ 120s] build: extracting built packages... [ 120s] capi-system-device-0.1.0-1.4.armv7l.rpm [ 120s] capi-system-device-debuginfo-0.1.0-1.4.armv7l.rpm [ 120s] capi-system-device-debugsource-0.1.0-1.4.armv7l.rpm [ 120s] capi-system-device-devel-0.1.0-1.4.armv7l.rpm [ 120s] capi-system-device-0.1.0-1.4.src.rpm [ 120s] _statistics