[ 0s] Using BUILD_ROOT=/srv/build/root_6/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_6/root [ 0s] [ 0s] [ 0s] w04 started "build _service:gbs:capi-system-sensor.spec" at Fri Feb 6 05:22:46 UTC 2015. [ 0s] [ 0s] Building capi-system-sensor for project 'Tizen:2.3:Mobile' repository 'target' arch 'armv7l' srcmd5 '6620f8179e62bcf1e0309213442d6b7e' [ 0s] [ 0s] processing specfile /srv/build/root_6/.build-srcdir/_service:gbs:capi-system-sensor.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_6/.build-srcdir/_service:gbs:capi-system-sensor.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/6/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_6/.build.rpmlist /srv/build/root_6/.build-srcdir/_service:gbs:capi-system-sensor.spec build rpmlint-Factory ... [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc-common -> eglibc [ 0s] cycle: libgcc -> eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: libgcc -> eglibc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/57] preinstalling tizen-release... [ 0s] [2/57] preinstalling libgcc... [ 0s] [3/57] preinstalling setup... [ 0s] [4/57] preinstalling filesystem... [ 0s] [5/57] preinstalling eglibc... [ 0s] [6/57] preinstalling eglibc-common... [ 1s] [7/57] preinstalling bash... [ 1s] [8/57] preinstalling bzip2-libs... [ 1s] [9/57] preinstalling diffutils... [ 1s] [10/57] preinstalling elfutils-libelf... [ 1s] [11/57] preinstalling libattr... [ 1s] [12/57] preinstalling liblua... [ 1s] [13/57] preinstalling libstdc++... [ 1s] [14/57] preinstalling ncurses-libs... [ 1s] [15/57] preinstalling nspr... [ 1s] [16/57] preinstalling nss-softokn-freebl... [ 1s] [17/57] preinstalling popt... [ 1s] [18/57] preinstalling readline... [ 1s] [19/57] preinstalling sed... [ 1s] [20/57] preinstalling sqlite... [ 1s] [21/57] preinstalling tar... [ 1s] [22/57] preinstalling xz-libs... [ 1s] [23/57] preinstalling zlib... [ 1s] [24/57] preinstalling qemu.x86_64... [ 1s] [25/57] preinstalling libcap... [ 1s] [26/57] preinstalling libacl... [ 1s] [27/57] preinstalling libfile... [ 1s] [28/57] preinstalling bzip2... [ 1s] [29/57] preinstalling nss... [ 1s] [30/57] preinstalling file... [ 2s] [31/57] preinstalling coreutils... [ 2s] [32/57] preinstalling rpm-libs... [ 2s] [33/57] preinstalling tizen-accelerator... [ 2s] [34/57] preinstalling rpm... [ 2s] [35/57] preinstalling gmp-x86-arm... [ 2s] [36/57] preinstalling mpc-x86-arm... [ 2s] [37/57] preinstalling mpfr-x86-arm... [ 2s] [38/57] preinstalling bzip2-libs-x86-arm... [ 2s] [39/57] preinstalling eglibc-x86-arm... [ 2s] [40/57] preinstalling elfutils-libelf-x86-arm... [ 2s] [41/57] preinstalling libacl-x86-arm... [ 2s] [42/57] preinstalling libattr-x86-arm... [ 2s] [43/57] preinstalling libcap-x86-arm... [ 2s] [44/57] preinstalling libfile-x86-arm... [ 2s] [45/57] preinstalling libgcc-x86-arm... [ 2s] [46/57] preinstalling liblua-x86-arm... [ 2s] [47/57] preinstalling ncurses-libs-x86-arm... [ 2s] [48/57] preinstalling nspr-x86-arm... [ 2s] [49/57] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [50/57] preinstalling nss-x86-arm... [ 2s] [51/57] preinstalling popt-x86-arm... [ 2s] [52/57] preinstalling rpm-libs-x86-arm... [ 2s] [53/57] preinstalling sqlite-x86-arm... [ 2s] [54/57] preinstalling xz-libs-x86-arm... [ 2s] [55/57] preinstalling zlib-x86-arm... [ 2s] [56/57] preinstalling bash-x86-arm... [ 2s] [57/57] preinstalling rpm-x86-arm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 3s] copying packages... [ 3s] reordering...cycle: bash -> eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> bash [ 3s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 3s] breaking dependency eglibc-common -> coreutils [ 3s] cycle: eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> findutils [ 3s] breaking dependency eglibc-common -> findutils [ 3s] cycle: eglibc -> eglibc-common -> grep [ 3s] breaking dependency grep -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 3s] breaking dependency grep -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 3s] breaking dependency libpcre -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 3s] breaking dependency libpcre -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 3s] breaking dependency libstdc++ -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 3s] breaking dependency eglibc-common -> grep [ 3s] cycle: eglibc -> eglibc-common -> libgcc [ 3s] breaking dependency eglibc -> eglibc-common [ 3s] cycle: eglibc -> libgcc [ 3s] breaking dependency libgcc -> eglibc [ 3s] cycle: filesystem -> setup [ 3s] breaking dependency setup -> filesystem [ 3s] cycle: ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses [ 3s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses-base [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl -> perl-libs [ 3s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 3s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl -> perl-IO-Compress-Zlib [ 3s] breaking dependency perl -> perl-IO-Compress-Zlib [ 3s] cycle: perl -> perl-IO-Compress-Base [ 3s] breaking dependency perl -> perl-IO-Compress-Base [ 3s] cycle: perl -> perl-Module-Pluggable [ 3s] breaking dependency perl -> perl-Module-Pluggable [ 3s] cycle: perl -> perl-Pod-Simple [ 3s] breaking dependency perl -> perl-Pod-Simple [ 3s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 3s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 3s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 3s] cycle: dbus-libs -> dbus [ 3s] breaking dependency dbus -> dbus-libs [ 3s] cycle: libsensord -> sensord [ 3s] breaking dependency libsensord -> sensord [ 3s] cycle: nss -> nss-sysinit [ 3s] breaking dependency nss -> nss-sysinit [ 3s] cycle: perl-CPAN -> perl-Test-Harness [ 3s] breaking dependency perl-Test-Harness -> perl-CPAN [ 3s] cycle: rpm-libs -> rpm [ 3s] breaking dependency rpm-libs -> rpm [ 3s] done [ 5s] booting kvm ... [ 5s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 16000 -drive file=/srv/build/root_6/root,if=virtio,cache=none -drive file=/srv/build/root_6/root,if=ide,index=0,cache=none -drive file=/srv/build/root_6/swap,if=virtio,cache=none -smp 8 [ 10s] doing fast boot [ 10s] Creating device nodes with udev [ 10s] Waiting for device /dev/vda to appear: ok [ 10s] fsck from util-linux 2.21.2 [ 10s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 10s] /dev/vda: clean, 4735/2392064 files, 240745/9568256 blocks [ 10s] fsck succeeded. Mounting root device read-write. [ 10s] Mounting root /dev/vda [ 10s] mount -o rw -t ext4 /dev/vda /root [ 10s] replacing /etc/mtab with symlink to /proc/self/mounts [ 10s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 11s] 2nd stage started in virtual machine [ 11s] machine type: armv7l [ 11s] switching personality to 8... [ 11s] 2nd stage started in virtual machine [ 11s] machine type: armv7l [ 11s] /.build/build: line 770: mount: command not found [ 11s] swapon on /dev/vdb [ 11s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 11s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 11s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 11s] logging output to //.build.log... [ 11s] processing specfile /.build-srcdir/_service:gbs:capi-system-sensor.spec ... [ 11s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:capi-system-sensor.spec build rpmlint-Factory ... [ 12s] running rpm-x86-arm postinstall script [ 12s] running rpm-libs-x86-arm postinstall script [ 12s] running tizen-accelerator postinstall script [ 12s] running bash-x86-arm postinstall script [ 13s] initializing rpm db... [ 17s] [1/165] installing cross-armv7l-platformfile-0.0.1-1.1 [ 17s] [2/165] installing kernel-headers-linux-3.0-3.0.101-1.2 [ 17s] [3/165] installing libX11-common-1.5.0-1.1 [ 17s] [4/165] installing tizen-release-2.2.0-1.1 [ 17s] [5/165] installing tzdata-2013h-1.1 [ 18s] [6/165] installing libgcc-4.6.4-1.15 [ 18s] [7/165] installing setup-0.1-1.1 [ 18s] [8/165] installing filesystem-0.1-1.1 [ 18s] warning: group lock does not exist - using root [ 18s] [9/165] installing eglibc-2.13-1.11 [ 18s] [10/165] installing libstdc++-4.6.4-1.15 [ 19s] [11/165] installing eglibc-common-2.13-1.11 [ 19s] [12/165] installing libstdc++-devel-4.6.4-1.15 [ 19s] [13/165] installing bash-4.1-1.1 [ 19s] [14/165] installing bzip2-libs-1.0.5-1.2 [ 19s] [15/165] installing capi-base-common-0.1.7-1.1 [ 19s] [16/165] installing cpio-2.8-1.1 [ 19s] [17/165] installing diffutils-3.0-1.1 [ 20s] [18/165] installing e2fsprogs-libs-1.41.9-1.2 [ 20s] [19/165] installing elfutils-libelf-0.152-1.9 [ 20s] [20/165] installing expat-2.0.1-1.2 [ 20s] [21/165] installing fdupes-1.40-1.1 [ 20s] [22/165] installing findutils-4.2.31-1.1 [ 20s] [23/165] installing gdbm-1.8.3-1.3 [ 20s] [24/165] installing libXau-1.0.7-1.1 [ 21s] [25/165] installing libattr-2.4.44-1.2 [ 21s] [26/165] installing libffi-3.0.9-1.1 [ 21s] [27/165] installing libgomp-4.6.4-1.15 [ 21s] [28/165] installing liblua-5.1.4-1.2 [ 22s] [29/165] installing libuuid-2.20.2-1.1 [ 22s] [30/165] installing lzo-2.03-1.3 [ 22s] [31/165] installing m4-1.4.14-1.1 [ 22s] [32/165] installing net-tools-1.60-1.2 [ 22s] [33/165] installing nspr-4.9-1.10 [ 22s] [34/165] installing nss-softokn-freebl-3.12.9-1.13 [ 22s] [35/165] installing openssl-1.0.1k-1.6 [ 23s] [36/165] installing patch-2.6-1.1 [ 23s] [37/165] installing pkg-config-0.25-1.2 [ 23s] [38/165] installing popt-1.16-1.2 [ 23s] [39/165] installing readline-5.2-1.2 [ 23s] [40/165] installing sed-4.1.5-1.1 [ 23s] [41/165] installing smack-1.0+s14-2.1 [ 23s] [42/165] installing sqlite-3.7.13-1.2 [ 23s] [43/165] installing tar-1.17-1.2 [ 24s] [44/165] installing xz-libs-5.0.3-1.3 [ 24s] [45/165] installing zlib-1.2.5-1.10 [ 24s] [46/165] installing gmp-4.2.1-1.2 [ 24s] [47/165] installing libpcre-7.7-1.3 [ 24s] [48/165] installing ncurses-libs-5.7-1.2 [ 24s] [49/165] installing build-compare-2009.10.14-1.5 [ 24s] [50/165] installing qemu.x86_64-1.2-2.1 [ 26s] [51/165] installing capi-base-common-devel-0.1.7-1.1 [ 27s] [52/165] installing eglibc-headers-2.13-1.11 [ 27s] [53/165] installing libcap-2.21-1.2 [ 27s] [54/165] installing unzip-6.0-1.7 [ 27s] [55/165] installing zlib-devel-1.2.5-1.10 [ 27s] [56/165] installing grep-2.5.1a-1.1 [ 27s] [57/165] installing libacl-2.2.49-1.2 [ 27s] [58/165] installing libfile-5.04-1.2 [ 27s] [59/165] installing libxcb-1.8.1-1.1 [ 27s] [60/165] installing libxml2-2.7.8-1.2 [ 28s] [61/165] installing lzo-minilzo-2.03-1.3 [ 28s] [62/165] installing make-3.82-1.2 [ 28s] [63/165] installing mpfr-3.0.0-1.2 [ 28s] [64/165] installing ncurses-5.7-1.2 [ 28s] [65/165] installing systemd-libs-210-3.2 [ 28s] [66/165] installing bzip2-1.0.5-1.2 [ 29s] [67/165] installing glib2-2.32.3-1.2 [ 29s] [68/165] installing kmod-libs-15-1.1 [ 30s] [69/165] installing libblkid-2.20.2-1.1 [ 31s] [70/165] installing smack-utils-1.0+s14-2.1 [ 31s] [71/165] installing xz-5.0.3-1.3 [ 31s] [72/165] installing binutils-2.22-1.5 [ 32s] [73/165] installing elfutils-libs-0.152-1.9 [ 32s] [74/165] installing nss-3.12.9-1.13 [ 32s] [75/165] installing perl-5.12.1-1.4 [ 33s] [76/165] installing ncurses-base-5.7-1.2 [ 33s] [77/165] installing perl-HTML-Tagset-3.20-1.1 [ 33s] [78/165] installing perl-IO-Compress-Base-2.008-1.4 [ 33s] [79/165] installing perl-Module-Pluggable-3.60-1.4 [ 34s] [80/165] installing perl-Pod-Escapes-1.04-1.4 [ 34s] [81/165] installing perl-TimeDate-1.20-1.1 [ 34s] [82/165] installing eglibc-devel-2.13-1.11 [ 34s] [83/165] installing file-5.04-1.2 [ 34s] [84/165] installing lzo-devel-2.03-1.3 [ 34s] [85/165] installing perl-Compress-Raw-Zlib-2.008-1.4 [ 34s] [86/165] installing perl-devel-5.12.1-1.4 [ 34s] [87/165] installing perl-libs-5.12.1-1.4 [ 34s] [88/165] installing coreutils-6.9-1.5 [ 35s] [89/165] installing libX11-1.5.0-1.1 [ 35s] [90/165] installing libdlog-0.4.1-1.1 [ 35s] [91/165] installing libmount-2.20.2-1.1 [ 35s] [92/165] installing mpc-0.9-1.2 [ 35s] [93/165] installing xz-lzma-compat-5.0.3-1.3 [ 35s] [94/165] installing elfutils-0.152-1.9 [ 35s] [95/165] installing nss-sysinit-3.12.9-1.13 [ 35s] [96/165] installing libarchive-2.8.3-1.1 [ 36s] [97/165] installing rpm-libs-4.9.1-1.1 [ 36s] [98/165] installing perl-ExtUtils-ParseXS-2.18-1.4 [ 36s] [99/165] installing perl-Pod-Simple-3.07-1.4 [ 36s] [100/165] installing perl-Test-Simple-0.80-1.4 [ 36s] [101/165] installing tizen-accelerator-1.0.1-1.1 [ 36s] [102/165] installing libdlog-devel-0.4.1-1.1 [ 36s] [103/165] installing perl-IO-Compress-Zlib-2.008-1.4 [ 36s] [104/165] installing perl-Test-Harness-3.12-1.4 [ 36s] [105/165] installing gawk-3.1.5-1.4 [ 36s] [106/165] installing gzip-1.3.12-1.1 [ 37s] [107/165] installing build-2011.01.10a-1.1 [ 37s] [108/165] installing rpm-4.9.1-1.1 [ 37s] [109/165] installing cpp-4.6.4-1.15 [ 37s] [110/165] installing dbus-1.6.4-1.1 [ 37s] [111/165] installing util-linux-2.20.2-1.1 [ 38s] [112/165] installing cmake-2.8.5-1.1 [ 38s] [113/165] installing bzip2-libs-x86-arm-1.0.5-1.1 [ 38s] [114/165] installing dbus-libs-1.6.4-1.1 [ 38s] [115/165] installing eglibc-x86-arm-2.13-1.2 [ 39s] [116/165] installing elfutils-libelf-x86-arm-0.152-1.1 [ 39s] [117/165] installing elfutils-libs-x86-arm-0.152-1.2 [ 39s] [118/165] installing gmp-x86-arm-4.2.1-1.1 [ 39s] [119/165] installing libacl-x86-arm-2.2.49-1.1 [ 39s] [120/165] installing libattr-x86-arm-2.4.44-1.1 [ 39s] [121/165] installing libcap-x86-arm-2.21-1.1 [ 40s] [122/165] installing libfile-x86-arm-5.04-1.2 [ 40s] [123/165] installing libgcc-x86-arm-4.6.4-1.1 [ 40s] [124/165] installing liblua-x86-arm-5.1.4-1.1 [ 40s] [125/165] installing mpc-x86-arm-0.9-1.1 [ 40s] [126/165] installing mpfr-x86-arm-3.0.0-1.1 [ 40s] [127/165] installing ncurses-libs-x86-arm-5.7-1.2 [ 41s] [128/165] installing nspr-x86-arm-4.9-1.2 [ 41s] [129/165] installing nss-softokn-freebl-x86-arm-3.12.9-1.2 [ 41s] [130/165] installing nss-x86-arm-3.12.9-1.2 [ 41s] [131/165] installing perl-ExtUtils-MakeMaker-6.36-1.4 [ 41s] [132/165] installing popt-x86-arm-1.16-1.1 [ 41s] [133/165] installing rpm-libs-x86-arm-4.9.1-1.2 [ 41s] [134/165] installing sqlite-x86-arm-3.7.13-1.1 [ 42s] [135/165] installing xz-libs-x86-arm-5.0.3-1.1 [ 42s] [136/165] installing zlib-x86-arm-1.2.5-1.1 [ 42s] [137/165] installing systemd-210-3.2 [ 43s] [138/165] installing gcc-4.6.4-1.15 [ 46s] [139/165] installing rpm-build-4.9.1-1.1 [ 46s] [140/165] installing perl-CPAN-1.9205-1.4 [ 47s] [141/165] installing bash-x86-arm-4.1-1.1 [ 48s] [142/165] installing fdupes-x86-arm-1.40-1.1 [ 48s] [143/165] installing findutils-x86-arm-4.2.31-1.1 [ 48s] [144/165] installing gawk-x86-arm-3.1.5-1.2 [ 49s] [145/165] installing gzip-x86-arm-1.3.12-1.1 [ 49s] [146/165] installing make-x86-arm-3.82-1.1 [ 49s] [147/165] installing sed-x86-arm-4.1.5-1.1 [ 49s] [148/165] installing tar-x86-arm-1.17-1.2 [ 49s] [149/165] installing diffutils-x86-arm-3.0-1.1 [ 50s] [150/165] installing patch-x86-arm-2.6-1.1 [ 50s] [151/165] installing autoconf-2.68-1.1 [ 50s] [152/165] installing coreutils-x86-arm-6.9-1.1 [ 52s] [153/165] installing file-x86-arm-5.04-1.1 [ 52s] [154/165] installing vconf-0.2.83-1.1 [ 52s] Failed to get D-Bus connection: Unknown error 4294967295 [ 52s] warning: %post(vconf-0.2.83-1.1.armv7l) scriptlet failed, exit status 1 [ 52s] [155/165] installing elfutils-x86-arm-0.152-1.2 [ 53s] [156/165] installing gcc-c++-4.6.4-1.15 [ 53s] [157/165] installing rpm-x86-arm-4.9.1-1.2 [ 54s] /bin/rpm.orig-arm already present - skipping. [ 54s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 54s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 54s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 54s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 54s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 54s] [158/165] installing rpm-build-x86-arm-4.9.1-1.2 [ 55s] [159/165] installing automake-1.11.1-1.1 [ 55s] [160/165] installing libsensord-1.1.17-1.1 [ 56s] [161/165] installing cross-armv7l-gcc-accel-x86-armv7l-4.6.4-1.4 [ 59s] "GCCVER: 4.6.4 GCCVER_NEW: 4.6.4 " [ 59s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 60s] [162/165] installing libtool-2.2.6b-1.2 [ 60s] [163/165] installing cross-armv7l-binutils-accel-x86-armv7l-2.22-1.4 [ 62s] [164/165] installing sensord-1.1.17-1.1 [ 62s] [165/165] installing libsensord-devel-1.1.17-1.1 [ 62s] removing nis flags from //etc/nsswitch.conf... [ 62s] now finalizing build dir... [ 63s] /.build/build: line 2585: mount: command not found [ 63s] /.build/build: line 2586: mount: command not found [ 66s] build target is armv7l-tizen-linux [ 66s] ----------------------------------------------------------------- [ 66s] I have the following modifications for capi-system-sensor.spec: [ 66s] 5c5 [ 66s] < Release: 10 [ 66s] --- [ 66s] > Release: 1.2 [ 66s] ----------------------------------------------------------------- [ 66s] ----- building capi-system-sensor.spec (user abuild) [ 66s] ----------------------------------------------------------------- [ 66s] ----------------------------------------------------------------- [ 66s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.3:Mobile/target/6620f8179e62bcf1e0309213442d6b7e-capi-system-sensor' /home/abuild/rpmbuild/SOURCES/capi-system-sensor.spec [ 66s] Building target platforms: armv7l-tizen-linux [ 66s] Building for target armv7l-tizen-linux [ 66s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.iRcKfg [ 66s] + umask 022 [ 66s] + cd /home/abuild/rpmbuild/BUILD [ 66s] + LANG=C [ 66s] + export LANG [ 66s] + unset DISPLAY [ 66s] + cd /home/abuild/rpmbuild/BUILD [ 66s] + rm -rf capi-system-sensor-0.1.18 [ 66s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/capi-system-sensor-0.1.18.tar.gz [ 66s] + /bin/tar -xf - [ 66s] + STATUS=0 [ 66s] + '[' 0 -ne 0 ']' [ 66s] + cd capi-system-sensor-0.1.18 [ 66s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 66s] + exit 0 [ 66s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.XBiuCc [ 66s] + umask 022 [ 66s] + cd /home/abuild/rpmbuild/BUILD [ 66s] + cd capi-system-sensor-0.1.18 [ 66s] + LANG=C [ 66s] + export LANG [ 66s] + unset DISPLAY [ 66s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 66s] + export CFLAGS [ 66s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 66s] + export CXXFLAGS [ 66s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 66s] + export FFLAGS [ 66s] + LD_AS_NEEDED=1 [ 66s] + export LD_AS_NEEDED [ 66s] + export 'CFLAGS+= -DTIZEN_ENGINEER_MODE' [ 66s] + CFLAGS+=' -DTIZEN_ENGINEER_MODE' [ 66s] ++ awk 'BEGIN {FS="."}{print $1}' [ 66s] ++ echo 0.1.18 [ 66s] + MAJORVER=0 [ 66s] + cmake . -DCMAKE_INSTALL_PREFIX=/usr -DFULLVER=0.1.18 -DMAJORVER=0 [ 67s] -- The C compiler identification is GNU [ 67s] -- The CXX compiler identification is GNU [ 67s] -- Check for working C compiler: /usr/bin/gcc [ 67s] -- Check for working C compiler: /usr/bin/gcc -- works [ 67s] -- Detecting C compiler ABI info [ 68s] -- Detecting C compiler ABI info - done [ 68s] -- Check for working CXX compiler: /usr/bin/c++ [ 68s] -- Check for working CXX compiler: /usr/bin/c++ -- works [ 68s] -- Detecting CXX compiler ABI info [ 68s] -- Detecting CXX compiler ABI info - done [ 69s] -- checking for module 'dlog sensor capi-base-common' [ 69s] -- found dlog sensor capi-base-common, version 1.0;1.1.0;0.1.7 [ 69s] -- Configuring done [ 69s] -- Generating done [ 69s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.1.18 [ 69s] + make -j8 [ 70s] Scanning dependencies of target capi-system-sensor [ 70s] [ 66%] [ 66%] [100%] Building CXX object CMakeFiles/capi-system-sensor.dir/src/sensor.cpp.o [ 70s] Building C object CMakeFiles/capi-system-sensor.dir/src/fusion_util.c.o [ 70s] Building C object CMakeFiles/capi-system-sensor.dir/src/geomanetic_field.c.o [ 70s] Linking CXX shared library libcapi-system-sensor.so [ 70s] [100%] Built target capi-system-sensor [ 70s] + exit 0 [ 70s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.9gLLJk [ 70s] + umask 022 [ 70s] + cd /home/abuild/rpmbuild/BUILD [ 70s] + cd capi-system-sensor-0.1.18 [ 70s] + LANG=C [ 70s] + export LANG [ 70s] + unset DISPLAY [ 70s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-1.2.arm [ 70s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-1.2.arm [ 70s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-1.2.arm [ 70s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-1.2.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-1.2.arm install [ 71s] [100%] Built target capi-system-sensor [ 71s] Install the project... [ 71s] -- Install configuration: "" [ 71s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-1.2.arm/usr/lib/libcapi-system-sensor.so.0.1.18 [ 71s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-1.2.arm/usr/lib/libcapi-system-sensor.so.0 [ 71s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-1.2.arm/usr/lib/libcapi-system-sensor.so [ 71s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-1.2.arm/usr/include/sensor [ 71s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-1.2.arm/usr/include/sensor/sensor.h [ 71s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-1.2.arm/usr/lib/pkgconfig/capi-system-sensor.pc [ 71s] + rm -f /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-1.2.arm/usr/share/info/dir [ 71s] + find /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-1.2.arm -regex '.*\.la$' [ 71s] + xargs rm -f -- [ 71s] + find /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-1.2.arm -regex '.*\.a$' [ 71s] + xargs rm -f -- [ 71s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-1.2.arm/usr/share/license [ 71s] + cp LICENSE /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-1.2.arm/usr/share/license/capi-system-sensor [ 71s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.1.18 [ 71s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-1.2.arm/usr/lib/libcapi-system-sensor.so.0.1.18 [ 71s] symlinked /usr/lib/debug/usr/lib/libcapi-system-sensor.so.0.1.18.debug to /usr/lib/debug/usr/lib/libcapi-system-sensor.so.0.debug [ 71s] symlinked /usr/lib/debug/usr/lib/libcapi-system-sensor.so.0.1.18.debug to /usr/lib/debug/usr/lib/libcapi-system-sensor.so.debug [ 71s] 131 blocks [ 71s] + /usr/lib/rpm/check-buildroot [ 71s] + /usr/lib/rpm//brp-compress [ 71s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 71s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 71s] + /usr/lib/rpm/brp-python-hardlink [ 71s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-1.2.arm [ 71s] Processing files: capi-system-sensor-0.1.18-1.2.armv7l [ 71s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 71s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cgo= [ 71s] [ 71s] Provides: libcapi-system-sensor.so.0 [ 71s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 71s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 71s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 71s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 71s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libm.so.6 libm.so.6(GLIBC_2.4) libsensor.so.1 libstdc++.so.6 libstdc++.so.6(GLIBCXX_3.4) [ 71s] Processing files: capi-system-sensor-devel-0.1.18-1.2.armv7l [ 71s] Provides: pkgconfig(capi-system-sensor) [ 71s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 71s] Requires: /usr/bin/pkg-config libcapi-system-sensor.so.0 pkgconfig(capi-base-common) [ 71s] Processing files: capi-system-sensor-debuginfo-0.1.18-1.2.armv7l [ 71s] Processing files: capi-system-sensor-debugsource-0.1.18-1.2.armv7l [ 71s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-1.2.arm [ 72s] Wrote: /home/abuild/rpmbuild/SRPMS/capi-system-sensor-0.1.18-1.2.src.rpm [ 72s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-0.1.18-1.2.armv7l.rpm [ 72s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-devel-0.1.18-1.2.armv7l.rpm [ 72s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-debuginfo-0.1.18-1.2.armv7l.rpm [ 72s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-debugsource-0.1.18-1.2.armv7l.rpm [ 72s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.olNcOq [ 72s] + umask 022 [ 72s] + cd /home/abuild/rpmbuild/BUILD [ 72s] + cd capi-system-sensor-0.1.18 [ 72s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-1.2.arm [ 72s] + exit 0 [ 72s] ... checking for files with abuild user/group [ 72s] ... creating baselibs [ 73s] ... comparing built packages with the former built [ 73s] /usr/lib/build/rpm-check.sh [ 73s] compare /.build.oldpackages/capi-system-sensor-0.1.18-1.1.src.rpm /home/abuild/rpmbuild/SRPMS/capi-system-sensor-0.1.18-1.2.src.rpm [ 74s] compare /.build.oldpackages/capi-system-sensor-0.1.18-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-0.1.18-1.2.armv7l.rpm [ 74s] /usr/lib/libcapi-system-sensor.so.0.1.18 differs in assembler output [ 74s] --- /tmp/tmp.vHhu9mn1BC 2015-02-06 05:24:00.044590380 +0000 [ 74s] +++ /tmp/tmp.8lA5AwaaSs 2015-02-06 05:24:00.064590379 +0000 [ 74s] @@ -1015,7 +1015,7 @@ [ 74s] vstr s14, [r1] [ 74s] ; instruction: 0xf73f6a00 [ 74s] cdp 12, 0, cr10, cr5, cr9, {2} [ 74s] - vldr s4, [pc, # ] ; [ 74s] + vldr s4, [pc, # ] ; [ 74s] vmla.f32 s12, s6, s25 [ 74s] ; instruction: 0xe6c52a90 [ 74s] bvc <__bss_end__ + ofs> [ 74s] @@ -1200,488 +1200,12 @@ [ 74s] lsls r0, r2, # [ 74s] movs r0, r0 [ 74s] lsls r0, r1, # [ 74s] - ... [ 74s] - [ 74s] -clamp: [ 74s] - vmov s14, r0 [ 74s] - vldr s15, [pc, # ] ; [ 74s] - vcmp.f32 s14, s15 [ 74s] - vmrs APSR_nzcv, fpscr [ 74s] - ite mi [ 74s] - vmovmi r0, s15 [ 74s] - vmovpl r0, s14 [ 74s] - bx lr [ 74s] - movs r0, r0 [ 74s] - ... [ 74s] - [ 74s] -getAngleChange: [ 74s] - cmp r0, # [ 74s] - it ne [ 74s] - cmpne r1, # [ 74s] - push {r3, r4, r5, lr} [ 74s] - vpush {d8-d11} [ 74s] - mov r4, r2 [ 74s] - ite ne [ 74s] - movne r5, # [ 74s] - moveq r5, # [ 74s] - beq.n [ 74s] - cmp r2, # [ 74s] - beq.n [ 74s] - vldr s19, [r0, # ] [ 74s] - vldr s14, [r1, # ] [ 74s] - vmul.f32 s14, s19, s14 [ 74s] - vldr s15, [r1, # ] [ 74s] - vldr s21, [r0, # ] [ 74s] - vldr s4, [r1] [ 74s] - vldr s5, [r1, # ] [ 74s] - vldr s23, [r0, # ] [ 74s] - vldr s8, [r1, # ] [ 74s] - vldr s18, [r1, # ] [ 74s] - vldr s6, [r0, # ] [ 74s] - vldr s7, [r0, # ] [ 74s] - vldr s9, [r1, # ] [ 74s] - vldr s20, [r1, # ] [ 74s] - vldr s10, [r0] [ 74s] - vldr s11, [r0, # ] [ 74s] - vldr s22, [r1, # ] [ 74s] - vldr s12, [r0, # ] [ 74s] - vldr s13, [r0, # ] [ 74s] - vmul.f32 s15, s19, s15 [ 74s] - vmla.f32 s14, s21, s4 [ 74s] - vmla.f32 s15, s21, s5 [ 74s] - vmla.f32 s14, s23, s8 [ 74s] - vmul.f32 s16, s18, s6 [ 74s] - vmul.f32 s17, s18, s7 [ 74s] - vmla.f32 s15, s23, s9 [ 74s] - vmla.f32 s16, s20, s10 [ 74s] - vmla.f32 s17, s20, s11 [ 74s] - vcvt.f64.f32 d16, s14 [ 74s] - vmov r0, r1, d16 [ 74s] - vcvt.f64.f32 d16, s15 [ 74s] - vmov r2, r3, d16 [ 74s] - vmla.f32 s16, s22, s12 [ 74s] - vmla.f32 s17, s22, s13 [ 74s] - blx <_init + ofs> [ 74s] - vmul.f32 s15, s18, s19 [ 74s] - vmov d16, r0, r1 [ 74s] - vmla.f32 s15, s20, s21 [ 74s] - vmla.f32 s15, s22, s23 [ 74s] - vcvt.f32.f64 s14, d16 [ 74s] - vneg.f32 s15, s15 [ 74s] - vstr s14, [r4] [ 74s] - vmov r0, s15 [ 74s] - vneg.f32 s16, s16 [ 74s] - blx <_init + ofs> [ 74s] - vcvt.f64.f32 d16, s17 [ 74s] - vmov r2, r3, d16 [ 74s] - vcvt.f64.f32 d16, s16 [ 74s] - str r0, [r4, # ] [ 74s] - vmov r0, r1, d16 [ 74s] - blx <_init + ofs> [ 74s] - vmov d16, r0, r1 [ 74s] - vcvt.f32.f64 s15, d16 [ 74s] - vstr s15, [r4, # ] [ 74s] - mov r0, r5 [ 74s] - vpop {d8-d11} [ 74s] - pop {r3, r4, r5, pc} [ 74s] - mov.w r5, # [ 74s] - b.n [ 74s] - nop [ 74s] - [ 74s] -quatToMatrix: [ 74s] - cmp r0, # [ 74s] - it ne [ 74s] - cmpne r1, # [ 74s] - ite ne [ 74s] - movne r3, # [ 74s] - moveq r3, # [ 74s] - beq.n [ 74s] - vmov.f32 s4, # ; 0x70 [ 74s] - vldr s10, [r0, # ] [ 74s] - vldr s15, [r0, # ] [ 74s] - vldr s13, [r0, # ] [ 74s] - vldr s12, [r0] [ 74s] - mov r0, r3 [ 74s] - vadd.f32 s14, s10, s10 [ 74s] - vmov.f32 s6, s4 [ 74s] - vadd.f32 s9, s15, s15 [ 74s] - vmls.f32 s6, s14, s10 [ 74s] - vmul.f32 s5, s9, s15 [ 74s] - vadd.f32 s11, s13, s13 [ 74s] - vmul.f32 s8, s13, s14 [ 74s] - vmul.f32 s9, s12, s9 [ 74s] - vmul.f32 s7, s11, s13 [ 74s] - vmul.f32 s10, s15, s14 [ 74s] - vmul.f32 s13, s15, s11 [ 74s] - vmul.f32 s15, s12, s14 [ 74s] - vsub.f32 s14, s6, s5 [ 74s] - vmul.f32 s11, s12, s11 [ 74s] - vstr s14, [r1, # ] [ 74s] - vsub.f32 s14, s8, s9 [ 74s] - vsub.f32 s4, s4, s7 [ 74s] - vstr s14, [r1, # ] [ 74s] - vadd.f32 s14, s10, s11 [ 74s] - vsub.f32 s5, s4, s5 [ 74s] - vstr s14, [r1, # ] [ 74s] - vsub.f32 s7, s6, s7 [ 74s] - vstr s5, [r1] [ 74s] - vsub.f32 s14, s13, s15 [ 74s] - vstr s7, [r1, # ] [ 74s] - vadd.f32 s9, s8, s9 [ 74s] - vstr s14, [r1, # ] [ 74s] - vsub.f32 s11, s10, s11 [ 74s] - vstr s9, [r1, # ] [ 74s] - vadd.f32 s15, s13, s15 [ 74s] - vstr s11, [r1, # ] [ 74s] - vstr s15, [r1, # ] [ 74s] - bx lr [ 74s] - mov.w r0, # [ 74s] - bx lr [ 74s] - [ 74s] -matrixToQuat: [ 74s] - cmp r0, # [ 74s] - it ne [ 74s] - cmpne r1, # [ 74s] - push {r3, r4, r5, lr} [ 74s] - vpush {d8-d9} [ 74s] - mov r5, r0 [ 74s] - mov r4, r1 [ 74s] - it eq [ 74s] - moveq.w r0, # [ 74s] - beq.w [ 74s] - vldr s16, [r5] [ 74s] - vldr s17, [r5, # ] [ 74s] - vsub.f32 s14, s16, s17 [ 74s] - vldr s18, [r5, # ] [ 74s] - vmov.f32 s15, # ; 0x70 [ 74s] - vsub.f32 s14, s14, s18 [ 74s] - vadd.f32 s15, s14, s15 [ 74s] - vmov r0, s15 [ 74s] - blx <_init + ofs> [ 74s] - vmov.f32 s15, # ; 0x50 [ 74s] - vmov s13, r0 [ 74s] - vmul.f32 s14, s13, s15 [ 74s] - vsqrt.f32 s15, s14 [ 74s] - vcmp.f32 s15, s15 [ 74s] - vmrs APSR_nzcv, fpscr [ 74s] - bne.w [ 74s] - vsub.f32 s14, s17, s16 [ 74s] - vstr s15, [r4] [ 74s] - vsub.f32 s14, s14, s18 [ 74s] - vmov.f32 s15, # ; 0x70 [ 74s] - vadd.f32 s15, s14, s15 [ 74s] - vmov r0, s15 [ 74s] - blx <_init + ofs> [ 74s] - vmov.f32 s15, # ; 0x50 [ 74s] - vmov s13, r0 [ 74s] - vmul.f32 s14, s13, s15 [ 74s] - vsqrt.f32 s15, s14 [ 74s] - vcmp.f32 s15, s15 [ 74s] - vmrs APSR_nzcv, fpscr [ 74s] - bne.w [ 74s] - vneg.f32 s14, s16 [ 74s] - vstr s15, [r4, # ] [ 74s] - vsub.f32 s14, s14, s17 [ 74s] - vmov.f32 s15, # ; 0x70 [ 74s] - vadd.f32 s14, s14, s18 [ 74s] - vadd.f32 s15, s14, s15 [ 74s] compare /.build.oldpackages/capi-system-sensor-debuginfo-0.1.18-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-debuginfo-0.1.18-1.2.armv7l.rpm [ 75s] --- /tmp/tmp.HPFzDN3XKZ 2015-02-06 05:24:00.244590374 +0000 [ 75s] +++ /tmp/tmp.8BPNHlGlpr 2015-02-06 05:24:00.256590374 +0000 [ 75s] @@ -1,8 +1,8 @@ [ 75s] /usr/lib/debug/ 0 (none) 40755 root root 0 4294967295 [ 75s] /usr/lib/debug/.build-id/ 0 (none) 40755 root root 0 4294967295 [ 75s] -/usr/lib/debug/.build-id/5a/ 0 (none) 40755 root root 0 4294967295 [ 75s] -/usr/lib/debug/.build-id/5a/0a2c96b7238fa3839066ac76d7272f1dfbdc10 0 (none) 120777 root root 0 4294967295 ../../../libcapi-system-sensor.so.0.1.18 [ 75s] -/usr/lib/debug/.build-id/5a/0a2c96b7238fa3839066ac76d7272f1dfbdc10.debug 0 (none) 120777 root root 0 4294967295 ../../usr/lib/libcapi-system-sensor.so.0.1.18.debug [ 75s] +/usr/lib/debug/.build-id/89/ 0 (none) 40755 root root 0 4294967295 [ 75s] +/usr/lib/debug/.build-id/89/36b81e73499095dcc210985f42440ffa1dbd1a 0 (none) 120777 root root 0 4294967295 ../../../libcapi-system-sensor.so.0.1.18 [ 75s] +/usr/lib/debug/.build-id/89/36b81e73499095dcc210985f42440ffa1dbd1a.debug 0 (none) 120777 root root 0 4294967295 ../../usr/lib/libcapi-system-sensor.so.0.1.18.debug [ 75s] /usr/lib/debug/usr/ 0 (none) 40755 root root 0 4294967295 [ 75s] /usr/lib/debug/usr/lib/ 0 (none) 40755 root root 0 4294967295 [ 75s] /usr/lib/debug/usr/lib/libcapi-system-sensor.so.0.1.18.debug 0 (none) 100755 root root 0 4294967295 [ 75s] RPM meta information is different [ 75s] compare /.build.oldpackages/capi-system-sensor-debugsource-0.1.18-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-debugsource-0.1.18-1.2.armv7l.rpm [ 75s] compare /.build.oldpackages/capi-system-sensor-devel-0.1.18-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-devel-0.1.18-1.2.armv7l.rpm [ 75s] ... saving built statistics [ 75s] /.build/build: line 3144: mount: command not found [ 75s] ERROR: no root disk device found, yet another new device name? [ 75s] ls: cannot access /sys/block/: No such file or directory [ 75s] /.build/build: line 3159: umount: command not found [ 75s] ... saving built packages [ 75s] /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-0.1.18-1.2.armv7l.rpm [ 75s] /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-debuginfo-0.1.18-1.2.armv7l.rpm [ 75s] /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-debugsource-0.1.18-1.2.armv7l.rpm [ 75s] /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-devel-0.1.18-1.2.armv7l.rpm [ 75s] /home/abuild/rpmbuild/SRPMS/capi-system-sensor-0.1.18-1.2.src.rpm [ 75s] /home/abuild/rpmbuild/OTHER/_statistics [ 76s] [ 76s] w04 finished "build capi-system-sensor.spec" at Fri Feb 6 05:24:01 UTC 2015. [ 76s] [ 79s] [ 69.802634] SysRq : Power Off [ 79s] [ 69.920376] Power down. [ 79s] build: extracting built packages... [ 79s] capi-system-sensor-0.1.18-1.2.armv7l.rpm [ 79s] capi-system-sensor-debuginfo-0.1.18-1.2.armv7l.rpm [ 79s] capi-system-sensor-debugsource-0.1.18-1.2.armv7l.rpm [ 79s] capi-system-sensor-devel-0.1.18-1.2.armv7l.rpm [ 79s] capi-system-sensor-0.1.18-1.2.src.rpm [ 79s] _statistics