[ 0s] Using BUILD_ROOT=/srv/build/root_3/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_3/root [ 0s] [ 0s] [ 0s] w16 started "build _service:gbs:dnsmasq.spec" at Tue Feb 3 19:53:11 UTC 2015. [ 0s] [ 0s] Building dnsmasq for project 'Tizen:2.3:Mobile' repository 'target' arch 'armv7l' srcmd5 '2c558a00f5f8769c7a22b4440303d3a8' [ 0s] [ 0s] processing specfile /srv/build/root_3/.build-srcdir/_service:gbs:dnsmasq.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_3/.build-srcdir/_service:gbs:dnsmasq.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/3/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_3/.build.rpmlist /srv/build/root_3/.build-srcdir/_service:gbs:dnsmasq.spec build rpmlint-Factory ... [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc-common -> eglibc [ 0s] cycle: libgcc -> eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: libgcc -> eglibc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/57] preinstalling tizen-release... [ 0s] [2/57] preinstalling libgcc... [ 0s] [3/57] preinstalling setup... [ 0s] [4/57] preinstalling filesystem... [ 0s] [5/57] preinstalling eglibc... [ 0s] [6/57] preinstalling eglibc-common... [ 0s] [7/57] preinstalling bash... [ 0s] [8/57] preinstalling bzip2-libs... [ 1s] [9/57] preinstalling diffutils... [ 1s] [10/57] preinstalling elfutils-libelf... [ 1s] [11/57] preinstalling libattr... [ 1s] [12/57] preinstalling liblua... [ 1s] [13/57] preinstalling libstdc++... [ 1s] [14/57] preinstalling ncurses-libs... [ 1s] [15/57] preinstalling nspr... [ 1s] [16/57] preinstalling nss-softokn-freebl... [ 1s] [17/57] preinstalling popt... [ 1s] [18/57] preinstalling readline... [ 1s] [19/57] preinstalling sed... [ 1s] [20/57] preinstalling sqlite... [ 1s] [21/57] preinstalling tar... [ 1s] [22/57] preinstalling xz-libs... [ 1s] [23/57] preinstalling zlib... [ 1s] [24/57] preinstalling qemu.x86_64... [ 1s] [25/57] preinstalling libcap... [ 1s] [26/57] preinstalling libacl... [ 1s] [27/57] preinstalling libfile... [ 1s] [28/57] preinstalling bzip2... [ 1s] [29/57] preinstalling nss... [ 1s] [30/57] preinstalling file... [ 2s] [31/57] preinstalling coreutils... [ 2s] [32/57] preinstalling rpm-libs... [ 2s] [33/57] preinstalling tizen-accelerator... [ 2s] [34/57] preinstalling rpm... [ 2s] [35/57] preinstalling gmp-x86-arm... [ 2s] [36/57] preinstalling mpc-x86-arm... [ 2s] [37/57] preinstalling mpfr-x86-arm... [ 2s] [38/57] preinstalling bzip2-libs-x86-arm... [ 2s] [39/57] preinstalling eglibc-x86-arm... [ 2s] [40/57] preinstalling elfutils-libelf-x86-arm... [ 2s] [41/57] preinstalling libacl-x86-arm... [ 2s] [42/57] preinstalling libattr-x86-arm... [ 2s] [43/57] preinstalling libcap-x86-arm... [ 2s] [44/57] preinstalling libfile-x86-arm... [ 2s] [45/57] preinstalling libgcc-x86-arm... [ 2s] [46/57] preinstalling liblua-x86-arm... [ 2s] [47/57] preinstalling ncurses-libs-x86-arm... [ 2s] [48/57] preinstalling nspr-x86-arm... [ 2s] [49/57] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [50/57] preinstalling nss-x86-arm... [ 2s] [51/57] preinstalling popt-x86-arm... [ 2s] [52/57] preinstalling rpm-libs-x86-arm... [ 2s] [53/57] preinstalling sqlite-x86-arm... [ 2s] [54/57] preinstalling xz-libs-x86-arm... [ 2s] [55/57] preinstalling zlib-x86-arm... [ 2s] [56/57] preinstalling bash-x86-arm... [ 2s] [57/57] preinstalling rpm-x86-arm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 3s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 3s] copying packages... [ 4s] reordering...cycle: bash -> eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> bash [ 4s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 4s] breaking dependency eglibc-common -> coreutils [ 4s] cycle: eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> findutils [ 4s] breaking dependency eglibc-common -> findutils [ 4s] cycle: eglibc -> eglibc-common -> grep [ 4s] breaking dependency grep -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 4s] breaking dependency grep -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 4s] breaking dependency libpcre -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 4s] breaking dependency libpcre -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 4s] breaking dependency libstdc++ -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 4s] breaking dependency eglibc-common -> grep [ 4s] cycle: eglibc -> eglibc-common -> libgcc [ 4s] breaking dependency eglibc -> eglibc-common [ 4s] cycle: eglibc -> libgcc [ 4s] breaking dependency libgcc -> eglibc [ 4s] cycle: filesystem -> setup [ 4s] breaking dependency setup -> filesystem [ 4s] cycle: ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses [ 4s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses-base [ 4s] cycle: perl -> perl-libs [ 4s] breaking dependency perl -> perl-libs [ 4s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 4s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl -> perl-IO-Compress-Zlib [ 4s] breaking dependency perl -> perl-IO-Compress-Zlib [ 4s] cycle: perl -> perl-IO-Compress-Base [ 4s] breaking dependency perl -> perl-IO-Compress-Base [ 4s] cycle: perl -> perl-Module-Pluggable [ 4s] breaking dependency perl -> perl-Module-Pluggable [ 4s] cycle: perl -> perl-Pod-Simple [ 4s] breaking dependency perl -> perl-Pod-Simple [ 4s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 4s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 4s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 4s] cycle: dbus -> dbus-libs [ 4s] breaking dependency dbus -> dbus-libs [ 4s] cycle: nss -> nss-sysinit [ 4s] breaking dependency nss -> nss-sysinit [ 4s] cycle: perl-CPAN -> perl-Test-Harness [ 4s] breaking dependency perl-Test-Harness -> perl-CPAN [ 4s] cycle: rpm-libs -> rpm [ 4s] breaking dependency rpm-libs -> rpm [ 4s] done [ 4s] booting kvm ... [ 4s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8192 -drive file=/srv/build/root_3/root,if=virtio,cache=none -drive file=/srv/build/root_3/root,if=ide,index=0,cache=none -drive file=/srv/build/root_3/swap,if=virtio,cache=none -smp 4 [ 6s] [ 0.000000] tsc: Fast TSC calibration failed [ 7s] doing fast boot [ 7s] Creating device nodes with udev [ 7s] Waiting for device /dev/vda to appear: ok [ 7s] fsck from util-linux 2.21.2 [ 7s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 7s] /dev/vda: clean, 4702/2392064 files, 239422/9568256 blocks [ 7s] fsck succeeded. Mounting root device read-write. [ 7s] Mounting root /dev/vda [ 7s] mount -o rw -t ext4 /dev/vda /root [ 7s] replacing /etc/mtab with symlink to /proc/self/mounts [ 7s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 7s] 2nd stage started in virtual machine [ 7s] machine type: armv7l [ 7s] switching personality to 8... [ 8s] 2nd stage started in virtual machine [ 8s] machine type: armv7l [ 8s] /.build/build: line 770: mount: command not found [ 8s] swapon on /dev/vdb [ 8s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 8s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 8s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 8s] logging output to //.build.log... [ 8s] processing specfile /.build-srcdir/_service:gbs:dnsmasq.spec ... [ 8s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:dnsmasq.spec build rpmlint-Factory ... [ 9s] running rpm-x86-arm postinstall script [ 9s] running rpm-libs-x86-arm postinstall script [ 9s] running tizen-accelerator postinstall script [ 9s] running bash-x86-arm postinstall script [ 10s] initializing rpm db... [ 14s] [1/152] installing cross-armv7l-platformfile-0.0.1-1.1 [ 14s] [2/152] installing kernel-headers-linux-3.0-3.0.101-1.2 [ 14s] [3/152] installing libX11-common-1.5.0-1.1 [ 14s] [4/152] installing tizen-release-2.2.0-1.1 [ 15s] [5/152] installing tzdata-2013h-1.1 [ 15s] [6/152] installing libgcc-4.6.4-1.15 [ 15s] [7/152] installing setup-0.1-1.1 [ 15s] [8/152] installing filesystem-0.1-1.1 [ 15s] warning: group lock does not exist - using root [ 15s] [9/152] installing eglibc-2.13-1.11 [ 15s] [10/152] installing libstdc++-4.6.4-1.15 [ 15s] [11/152] installing eglibc-common-2.13-1.11 [ 16s] [12/152] installing libstdc++-devel-4.6.4-1.15 [ 16s] [13/152] installing bash-4.1-1.1 [ 16s] [14/152] installing bzip2-libs-1.0.5-1.2 [ 16s] [15/152] installing cpio-2.8-1.1 [ 16s] [16/152] installing diffutils-3.0-1.1 [ 16s] [17/152] installing e2fsprogs-libs-1.41.9-1.2 [ 16s] [18/152] installing elfutils-libelf-0.152-1.9 [ 17s] [19/152] installing expat-2.0.1-1.2 [ 17s] [20/152] installing fdupes-1.40-1.1 [ 17s] [21/152] installing findutils-4.2.31-1.1 [ 17s] [22/152] installing gdbm-1.8.3-1.3 [ 17s] [23/152] installing libXau-1.0.7-1.1 [ 17s] [24/152] installing libattr-2.4.44-1.2 [ 17s] [25/152] installing libgomp-4.6.4-1.15 [ 17s] [26/152] installing liblua-5.1.4-1.2 [ 17s] [27/152] installing libuuid-2.20.2-1.1 [ 17s] [28/152] installing lzo-2.03-1.3 [ 18s] [29/152] installing m4-1.4.14-1.1 [ 18s] [30/152] installing net-tools-1.60-1.2 [ 18s] [31/152] installing nspr-4.9-1.10 [ 18s] [32/152] installing nss-softokn-freebl-3.12.9-1.13 [ 18s] [33/152] installing openssl-1.0.1k-1.6 [ 18s] [34/152] installing patch-2.6-1.1 [ 18s] [35/152] installing pkg-config-0.25-1.2 [ 18s] [36/152] installing popt-1.16-1.2 [ 18s] [37/152] installing readline-5.2-1.2 [ 18s] [38/152] installing sed-4.1.5-1.1 [ 18s] [39/152] installing smack-1.0+s14-1.2 [ 19s] [40/152] installing sqlite-3.7.13-1.2 [ 19s] [41/152] installing tar-1.17-1.2 [ 19s] [42/152] installing xz-libs-5.0.3-1.3 [ 19s] [43/152] installing zlib-1.2.5-1.10 [ 19s] [44/152] installing gmp-4.2.1-1.2 [ 19s] [45/152] installing libpcre-7.7-1.3 [ 19s] [46/152] installing ncurses-libs-5.7-1.2 [ 19s] [47/152] installing build-compare-2009.10.14-1.5 [ 19s] [48/152] installing qemu.x86_64-1.2-2.1 [ 21s] [49/152] installing eglibc-headers-2.13-1.11 [ 21s] [50/152] installing libcap-2.21-1.2 [ 21s] [51/152] installing unzip-6.0-1.7 [ 21s] [52/152] installing zlib-devel-1.2.5-1.10 [ 21s] [53/152] installing grep-2.5.1a-1.1 [ 21s] [54/152] installing libacl-2.2.49-1.2 [ 22s] [55/152] installing libfile-5.04-1.2 [ 22s] [56/152] installing libxcb-1.8.1-1.1 [ 22s] [57/152] installing libxml2-2.7.8-1.2 [ 22s] [58/152] installing lzo-minilzo-2.03-1.3 [ 22s] [59/152] installing make-3.82-1.2 [ 22s] [60/152] installing mpfr-3.0.0-1.2 [ 22s] [61/152] installing ncurses-5.7-1.2 [ 22s] [62/152] installing bzip2-1.0.5-1.2 [ 22s] [63/152] installing libblkid-2.20.2-1.1 [ 23s] [64/152] installing xz-5.0.3-1.3 [ 23s] [65/152] installing binutils-2.22-1.5 [ 23s] [66/152] installing elfutils-libs-0.152-1.9 [ 23s] [67/152] installing nss-3.12.9-1.13 [ 23s] [68/152] installing perl-5.12.1-1.4 [ 24s] [69/152] installing ncurses-base-5.7-1.2 [ 24s] [70/152] installing perl-HTML-Tagset-3.20-1.1 [ 24s] [71/152] installing perl-IO-Compress-Base-2.008-1.4 [ 24s] [72/152] installing perl-Module-Pluggable-3.60-1.4 [ 24s] [73/152] installing perl-Pod-Escapes-1.04-1.4 [ 24s] [74/152] installing perl-TimeDate-1.20-1.1 [ 24s] [75/152] installing eglibc-devel-2.13-1.11 [ 24s] [76/152] installing file-5.04-1.2 [ 25s] [77/152] installing lzo-devel-2.03-1.3 [ 25s] [78/152] installing perl-Compress-Raw-Zlib-2.008-1.4 [ 25s] [79/152] installing perl-devel-5.12.1-1.4 [ 25s] [80/152] installing perl-libs-5.12.1-1.4 [ 25s] [81/152] installing coreutils-6.9-1.5 [ 25s] [82/152] installing libX11-1.5.0-1.1 [ 25s] [83/152] installing libmount-2.20.2-1.1 [ 25s] [84/152] installing mpc-0.9-1.2 [ 25s] [85/152] installing xz-lzma-compat-5.0.3-1.3 [ 25s] [86/152] installing elfutils-0.152-1.9 [ 26s] [87/152] installing nss-sysinit-3.12.9-1.13 [ 26s] [88/152] installing libarchive-2.8.3-1.1 [ 26s] [89/152] installing rpm-libs-4.9.1-1.1 [ 26s] [90/152] installing perl-ExtUtils-ParseXS-2.18-1.4 [ 26s] [91/152] installing perl-Pod-Simple-3.07-1.4 [ 26s] [92/152] installing perl-Test-Simple-0.80-1.4 [ 26s] [93/152] installing tizen-accelerator-1.0.1-1.1 [ 27s] [94/152] installing perl-IO-Compress-Zlib-2.008-1.4 [ 27s] [95/152] installing perl-Test-Harness-3.12-1.4 [ 27s] [96/152] installing gawk-3.1.5-1.4 [ 27s] [97/152] installing gzip-1.3.12-1.1 [ 27s] [98/152] installing build-2011.01.10a-1.1 [ 27s] [99/152] installing rpm-4.9.1-1.1 [ 27s] [100/152] installing cpp-4.6.4-1.15 [ 28s] [101/152] installing dbus-1.6.4-1.1 [ 28s] [102/152] installing util-linux-2.20.2-1.1 [ 28s] [103/152] installing cmake-2.8.5-1.1 [ 28s] [104/152] installing bzip2-libs-x86-arm-1.0.5-1.1 [ 28s] [105/152] installing dbus-libs-1.6.4-1.1 [ 29s] [106/152] installing eglibc-x86-arm-2.13-1.2 [ 29s] [107/152] installing elfutils-libelf-x86-arm-0.152-1.1 [ 29s] [108/152] installing elfutils-libs-x86-arm-0.152-1.2 [ 29s] [109/152] installing gmp-x86-arm-4.2.1-1.1 [ 29s] [110/152] installing libacl-x86-arm-2.2.49-1.1 [ 29s] [111/152] installing libattr-x86-arm-2.4.44-1.1 [ 30s] [112/152] installing libcap-x86-arm-2.21-1.1 [ 30s] [113/152] installing libfile-x86-arm-5.04-1.2 [ 30s] [114/152] installing libgcc-x86-arm-4.6.4-1.1 [ 30s] [115/152] installing liblua-x86-arm-5.1.4-1.1 [ 30s] [116/152] installing mpc-x86-arm-0.9-1.1 [ 30s] [117/152] installing mpfr-x86-arm-3.0.0-1.1 [ 30s] [118/152] installing ncurses-libs-x86-arm-5.7-1.2 [ 31s] [119/152] installing nspr-x86-arm-4.9-1.2 [ 31s] [120/152] installing nss-softokn-freebl-x86-arm-3.12.9-1.2 [ 31s] [121/152] installing nss-x86-arm-3.12.9-1.2 [ 31s] [122/152] installing perl-ExtUtils-MakeMaker-6.36-1.4 [ 31s] [123/152] installing popt-x86-arm-1.16-1.1 [ 31s] [124/152] installing rpm-libs-x86-arm-4.9.1-1.2 [ 31s] [125/152] installing sqlite-x86-arm-3.7.13-1.1 [ 31s] [126/152] installing xz-libs-x86-arm-5.0.3-1.1 [ 32s] [127/152] installing zlib-x86-arm-1.2.5-1.1 [ 32s] [128/152] installing gcc-4.6.4-1.15 [ 32s] [129/152] installing rpm-build-4.9.1-1.1 [ 32s] [130/152] installing dbus-devel-1.6.4-1.1 [ 32s] [131/152] installing perl-CPAN-1.9205-1.4 [ 32s] [132/152] installing bash-x86-arm-4.1-1.1 [ 32s] [133/152] installing fdupes-x86-arm-1.40-1.1 [ 33s] [134/152] installing findutils-x86-arm-4.2.31-1.1 [ 33s] [135/152] installing gawk-x86-arm-3.1.5-1.2 [ 33s] [136/152] installing gzip-x86-arm-1.3.12-1.1 [ 33s] [137/152] installing make-x86-arm-3.82-1.1 [ 33s] [138/152] installing sed-x86-arm-4.1.5-1.1 [ 33s] [139/152] installing tar-x86-arm-1.17-1.2 [ 33s] [140/152] installing diffutils-x86-arm-3.0-1.1 [ 34s] [141/152] installing patch-x86-arm-2.6-1.1 [ 34s] [142/152] installing autoconf-2.68-1.1 [ 34s] [143/152] installing coreutils-x86-arm-6.9-1.1 [ 36s] [144/152] installing file-x86-arm-5.04-1.1 [ 37s] [145/152] installing elfutils-x86-arm-0.152-1.2 [ 37s] [146/152] installing gcc-c++-4.6.4-1.15 [ 37s] [147/152] installing rpm-x86-arm-4.9.1-1.2 [ 37s] /bin/rpm.orig-arm already present - skipping. [ 37s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 37s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 37s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 37s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 37s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 37s] [148/152] installing rpm-build-x86-arm-4.9.1-1.2 [ 37s] [149/152] installing automake-1.11.1-1.1 [ 37s] [150/152] installing cross-armv7l-gcc-accel-x86-armv7l-4.6.4-1.4 [ 38s] "GCCVER: 4.6.4 GCCVER_NEW: 4.6.4 " [ 38s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 38s] [151/152] installing libtool-2.2.6b-1.2 [ 38s] [152/152] installing cross-armv7l-binutils-accel-x86-armv7l-2.22-1.4 [ 39s] removing nis flags from //etc/nsswitch.conf... [ 39s] now finalizing build dir... [ 39s] /.build/build: line 2585: mount: command not found [ 39s] /.build/build: line 2586: mount: command not found [ 42s] build target is armv7l-tizen-linux [ 42s] ----------------------------------------------------------------- [ 42s] I have the following modifications for dnsmasq.spec: [ 42s] 5c5 [ 42s] < Release: 7 [ 42s] --- [ 42s] > Release: 1.1 [ 42s] ----------------------------------------------------------------- [ 42s] ----- building dnsmasq.spec (user abuild) [ 42s] ----------------------------------------------------------------- [ 42s] ----------------------------------------------------------------- [ 43s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.3:Mobile/target/2c558a00f5f8769c7a22b4440303d3a8-dnsmasq' /home/abuild/rpmbuild/SOURCES/dnsmasq.spec [ 43s] Building target platforms: armv7l-tizen-linux [ 43s] Building for target armv7l-tizen-linux [ 43s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.DS6R24 [ 43s] + umask 022 [ 43s] + cd /home/abuild/rpmbuild/BUILD [ 43s] + LANG=C [ 43s] + export LANG [ 43s] + unset DISPLAY [ 43s] + cd /home/abuild/rpmbuild/BUILD [ 43s] + rm -rf dnsmasq-2.57_8 [ 43s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/dnsmasq-2.57_8.tar.gz [ 43s] + /bin/tar -xf - [ 43s] + STATUS=0 [ 43s] + '[' 0 -ne 0 ']' [ 43s] + cd dnsmasq-2.57_8 [ 43s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 43s] + exit 0 [ 43s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.7RN6Cp [ 43s] + umask 022 [ 43s] + cd /home/abuild/rpmbuild/BUILD [ 43s] + cd dnsmasq-2.57_8 [ 43s] + LANG=C [ 43s] + export LANG [ 43s] + unset DISPLAY [ 43s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 43s] + export CFLAGS [ 43s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 43s] + export CXXFLAGS [ 43s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 43s] + export FFLAGS [ 43s] + LD_AS_NEEDED=1 [ 43s] + export LD_AS_NEEDED [ 43s] + cmake . -DCMAKE_INSTALL_PREFIX=/usr [ 43s] -- The C compiler identification is GNU [ 43s] -- Check for working C compiler: /usr/bin/gcc [ 43s] -- Check for working C compiler: /usr/bin/gcc -- works [ 43s] -- Detecting C compiler ABI info [ 44s] -- Detecting C compiler ABI info - done [ 44s] Build type: Release [ 44s] -- checking for module 'dbus-1' [ 44s] -- found dbus-1, version 1.6.4 [ 45s] -- Configuring done [ 45s] -- Generating done [ 45s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/dnsmasq-2.57_8 [ 45s] + make -j4 [ 45s] Scanning dependencies of target dnsmasq [ 45s] [ 25%] [ 25%] [ 25%] [ 25%] Building C object CMakeFiles/dnsmasq.dir/src/cache.c.o [ 45s] Building C object CMakeFiles/dnsmasq.dir/src/dbus.c.o [ 45s] Building C object CMakeFiles/dnsmasq.dir/src/bpf.c.o [ 45s] Building C object CMakeFiles/dnsmasq.dir/src/dhcp.c.o [ 45s] [ 31%] Building C object CMakeFiles/dnsmasq.dir/src/dnsmasq.c.o [ 45s] [ 37%] Building C object CMakeFiles/dnsmasq.dir/src/forward.c.o [ 45s] [ 43%] Building C object CMakeFiles/dnsmasq.dir/src/helper.c.o [ 46s] [ 50%] Building C object CMakeFiles/dnsmasq.dir/src/lease.c.o [ 46s] [ 56%] Building C object CMakeFiles/dnsmasq.dir/src/log.c.o [ 46s] [ 62%] [ 68%] Building C object CMakeFiles/dnsmasq.dir/src/netlink.c.o [ 46s] Building C object CMakeFiles/dnsmasq.dir/src/network.c.o [ 46s] [ 75%] Building C object CMakeFiles/dnsmasq.dir/src/option.c.o [ 46s] [ 81%] Building C object CMakeFiles/dnsmasq.dir/src/rfc1035.c.o [ 46s] [ 87%] /home/abuild/rpmbuild/BUILD/dnsmasq-2.57_8/src/rfc1035.c: In function 'do_doctor': [ 46s] /home/abuild/rpmbuild/BUILD/dnsmasq-2.57_8/src/rfc1035.c:645:17: warning: variable 'ttl' set but not used [-Wunused-but-set-variable] [ 46s] /home/abuild/rpmbuild/BUILD/dnsmasq-2.57_8/src/rfc1035.c: In function 'answer_request': [ 46s] /home/abuild/rpmbuild/BUILD/dnsmasq-2.57_8/src/rfc1035.c:1312:29: warning: variable 'ext_rcode' set but not used [-Wunused-but-set-variable] [ 46s] Building C object CMakeFiles/dnsmasq.dir/src/rfc2131.c.o [ 46s] [ 93%] Building C object CMakeFiles/dnsmasq.dir/src/tftp.c.o [ 46s] [100%] Building C object CMakeFiles/dnsmasq.dir/src/util.c.o [ 47s] Linking C executable dnsmasq [ 47s] [100%] Built target dnsmasq [ 47s] + exit 0 [ 47s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.lgojU0 [ 47s] + umask 022 [ 47s] + cd /home/abuild/rpmbuild/BUILD [ 47s] + cd dnsmasq-2.57_8 [ 47s] + LANG=C [ 47s] + export LANG [ 47s] + unset DISPLAY [ 47s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/dnsmasq-2.57_8-1.1.arm [ 47s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dnsmasq-2.57_8-1.1.arm [ 47s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/dnsmasq-2.57_8-1.1.arm [ 47s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/dnsmasq-2.57_8-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/dnsmasq-2.57_8-1.1.arm install [ 47s] [100%] Built target dnsmasq [ 47s] Install the project... [ 47s] -- Install configuration: "Release" [ 48s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/dnsmasq-2.57_8-1.1.arm/usr/bin/dnsmasq [ 48s] + rm -f /home/abuild/rpmbuild/BUILDROOT/dnsmasq-2.57_8-1.1.arm/usr/share/info/dir [ 48s] + xargs rm -f -- [ 48s] + find /home/abuild/rpmbuild/BUILDROOT/dnsmasq-2.57_8-1.1.arm -regex '.*\.la$' [ 48s] + find /home/abuild/rpmbuild/BUILDROOT/dnsmasq-2.57_8-1.1.arm -regex '.*\.a$' [ 48s] + xargs rm -f -- [ 48s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dnsmasq-2.57_8-1.1.arm/usr/share/license [ 48s] + cp COPYING /home/abuild/rpmbuild/BUILDROOT/dnsmasq-2.57_8-1.1.arm/usr/share/license/dnsmasq [ 48s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/dnsmasq-2.57_8 [ 48s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/dnsmasq-2.57_8-1.1.arm/usr/bin/dnsmasq [ 48s] 969 blocks [ 48s] + /usr/lib/rpm/check-buildroot [ 48s] + /usr/lib/rpm//brp-compress [ 48s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 48s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 48s] + /usr/lib/rpm/brp-python-hardlink [ 48s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/dnsmasq-2.57_8-1.1.arm [ 48s] Processing files: dnsmasq-2.57_8-1.1.armv7l [ 48s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 48s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 48s] [ 48s] Requires(interp): /bin/sh [ 48s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 48s] Requires(post): /bin/sh [ 48s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.11) libc.so.6(GLIBC_2.4) libdbus-1.so.3 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) [ 48s] Processing files: dnsmasq-debuginfo-2.57_8-1.1.armv7l [ 48s] Processing files: dnsmasq-debugsource-2.57_8-1.1.armv7l [ 48s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/dnsmasq-2.57_8-1.1.arm [ 48s] Wrote: /home/abuild/rpmbuild/SRPMS/dnsmasq-2.57_8-1.1.src.rpm [ 48s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/dnsmasq-2.57_8-1.1.armv7l.rpm [ 48s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/dnsmasq-debuginfo-2.57_8-1.1.armv7l.rpm [ 48s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/dnsmasq-debugsource-2.57_8-1.1.armv7l.rpm [ 48s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.zIAIBn [ 48s] + umask 022 [ 48s] + cd /home/abuild/rpmbuild/BUILD [ 48s] + cd dnsmasq-2.57_8 [ 48s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/dnsmasq-2.57_8-1.1.arm [ 48s] + exit 0 [ 48s] ... checking for files with abuild user/group [ 49s] ... creating baselibs [ 49s] ... saving built statistics [ 49s] /.build/build: line 3144: mount: command not found [ 49s] ERROR: no root disk device found, yet another new device name? [ 49s] ls: cannot access /sys/block/: No such file or directory [ 49s] /.build/build: line 3159: umount: command not found [ 49s] ... saving built packages [ 50s] /home/abuild/rpmbuild/RPMS/armv7l/dnsmasq-2.57_8-1.1.armv7l.rpm [ 50s] /home/abuild/rpmbuild/RPMS/armv7l/dnsmasq-debuginfo-2.57_8-1.1.armv7l.rpm [ 50s] /home/abuild/rpmbuild/RPMS/armv7l/dnsmasq-debugsource-2.57_8-1.1.armv7l.rpm [ 50s] /home/abuild/rpmbuild/SRPMS/dnsmasq-2.57_8-1.1.src.rpm [ 50s] /home/abuild/rpmbuild/OTHER/_statistics [ 50s] [ 50s] w16 finished "build dnsmasq.spec" at Tue Feb 3 19:54:00 UTC 2015. [ 50s] [ 51s] /.build/build: line 368: 238 Killed background_monitor_process [ 53s] [ 46.767680] SysRq : Power Off [ 53s] [ 46.880353] Power down. [ 53s] build: extracting built packages... [ 53s] dnsmasq-2.57_8-1.1.armv7l.rpm [ 53s] dnsmasq-debuginfo-2.57_8-1.1.armv7l.rpm [ 53s] dnsmasq-debugsource-2.57_8-1.1.armv7l.rpm [ 53s] dnsmasq-2.57_8-1.1.src.rpm [ 53s] _statistics Retried build at Thu Feb 5 21:06:36 2015 returned same result, skipped