[ 0s] Using BUILD_ROOT=/srv/build/root_2/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_2/root [ 0s] [ 0s] [ 0s] w25 started "build _service:gbs:perl-Test-Pod-Coverage.spec" at Tue Feb 3 09:19:49 UTC 2015. [ 0s] [ 0s] Building perl-Test-Pod-Coverage for project 'Tizen:2.3:Mobile' repository 'target' arch 'armv7l' srcmd5 '7735e397a9c635cda098f2b9858c284d' [ 0s] [ 0s] processing specfile /srv/build/root_2/.build-srcdir/_service:gbs:perl-Test-Pod-Coverage.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_2/.build-srcdir/_service:gbs:perl-Test-Pod-Coverage.spec [ 1s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_2/.build.rpmlist /srv/build/root_2/.build-srcdir/_service:gbs:perl-Test-Pod-Coverage.spec build rpmlint-Factory ... [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils [ 1s] breaking dependency eglibc-common -> coreutils [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc-common -> eglibc [ 1s] cycle: libgcc -> eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: libgcc -> eglibc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: rpm-libs -> rpm [ 1s] breaking dependency rpm-libs -> rpm [ 1s] [1/57] preinstalling tizen-release... [ 1s] [2/57] preinstalling libgcc... [ 1s] [3/57] preinstalling setup... [ 1s] [4/57] preinstalling filesystem... [ 1s] [5/57] preinstalling eglibc... [ 1s] [6/57] preinstalling eglibc-common... [ 1s] [7/57] preinstalling bash... [ 1s] [8/57] preinstalling bzip2-libs... [ 2s] [9/57] preinstalling diffutils... [ 2s] [10/57] preinstalling elfutils-libelf... [ 2s] [11/57] preinstalling libattr... [ 2s] [12/57] preinstalling liblua... [ 2s] [13/57] preinstalling libstdc++... [ 2s] [14/57] preinstalling ncurses-libs... [ 2s] [15/57] preinstalling nspr... [ 2s] [16/57] preinstalling nss-softokn-freebl... [ 2s] [17/57] preinstalling popt... [ 2s] [18/57] preinstalling readline... [ 2s] [19/57] preinstalling sed... [ 2s] [20/57] preinstalling sqlite... [ 2s] [21/57] preinstalling tar... [ 2s] [22/57] preinstalling xz-libs... [ 2s] [23/57] preinstalling zlib... [ 2s] [24/57] preinstalling qemu.x86_64... [ 2s] [25/57] preinstalling libcap... [ 2s] [26/57] preinstalling libacl... [ 2s] [27/57] preinstalling libfile... [ 2s] [28/57] preinstalling bzip2... [ 2s] [29/57] preinstalling nss... [ 2s] [30/57] preinstalling file... [ 2s] [31/57] preinstalling coreutils... [ 2s] [32/57] preinstalling rpm-libs... [ 2s] [33/57] preinstalling tizen-accelerator... [ 3s] [34/57] preinstalling rpm... [ 3s] [35/57] preinstalling gmp-x86-arm... [ 3s] [36/57] preinstalling mpc-x86-arm... [ 3s] [37/57] preinstalling mpfr-x86-arm... [ 3s] [38/57] preinstalling bzip2-libs-x86-arm... [ 3s] [39/57] preinstalling eglibc-x86-arm... [ 3s] [40/57] preinstalling elfutils-libelf-x86-arm... [ 3s] [41/57] preinstalling libacl-x86-arm... [ 3s] [42/57] preinstalling libattr-x86-arm... [ 3s] [43/57] preinstalling libcap-x86-arm... [ 3s] [44/57] preinstalling libfile-x86-arm... [ 3s] [45/57] preinstalling libgcc-x86-arm... [ 3s] [46/57] preinstalling liblua-x86-arm... [ 3s] [47/57] preinstalling ncurses-libs-x86-arm... [ 3s] [48/57] preinstalling nspr-x86-arm... [ 3s] [49/57] preinstalling nss-softokn-freebl-x86-arm... [ 3s] [50/57] preinstalling nss-x86-arm... [ 3s] [51/57] preinstalling popt-x86-arm... [ 3s] [52/57] preinstalling rpm-libs-x86-arm... [ 3s] [53/57] preinstalling sqlite-x86-arm... [ 3s] [54/57] preinstalling xz-libs-x86-arm... [ 3s] [55/57] preinstalling zlib-x86-arm... [ 3s] [56/57] preinstalling bash-x86-arm... [ 3s] [57/57] preinstalling rpm-x86-arm... [ 3s] [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl-libs -> perl [ 3s] [1/8] preinstalling e2fsprogs-libs... [ 3s] [2/8] preinstalling libpcre... [ 3s] [3/8] preinstalling libuuid... [ 3s] [4/8] preinstalling grep... [ 3s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 4s] copying packages... [ 4s] reordering...cycle: bash -> eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> bash [ 4s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 4s] breaking dependency eglibc-common -> coreutils [ 4s] cycle: eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> findutils [ 4s] breaking dependency eglibc-common -> findutils [ 4s] cycle: eglibc -> eglibc-common -> grep [ 4s] breaking dependency grep -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 4s] breaking dependency grep -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 4s] breaking dependency libpcre -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 4s] breaking dependency libpcre -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 4s] breaking dependency libstdc++ -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 4s] breaking dependency eglibc-common -> grep [ 4s] cycle: eglibc -> eglibc-common -> libgcc [ 4s] breaking dependency eglibc -> eglibc-common [ 4s] cycle: eglibc -> libgcc [ 4s] breaking dependency libgcc -> eglibc [ 4s] cycle: filesystem -> setup [ 4s] breaking dependency setup -> filesystem [ 4s] cycle: ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses [ 4s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses-base [ 4s] cycle: perl -> perl-libs [ 4s] breaking dependency perl -> perl-libs [ 4s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 4s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl -> perl-IO-Compress-Zlib [ 4s] breaking dependency perl -> perl-IO-Compress-Zlib [ 4s] cycle: perl -> perl-IO-Compress-Base [ 4s] breaking dependency perl -> perl-IO-Compress-Base [ 4s] cycle: perl -> perl-Module-Pluggable [ 4s] breaking dependency perl -> perl-Module-Pluggable [ 4s] cycle: perl -> perl-Pod-Simple [ 4s] breaking dependency perl -> perl-Pod-Simple [ 4s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 4s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 4s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 4s] cycle: nss -> nss-sysinit [ 4s] breaking dependency nss -> nss-sysinit [ 4s] cycle: perl-CPAN -> perl-Test-Harness [ 4s] breaking dependency perl-Test-Harness -> perl-CPAN [ 4s] cycle: rpm-libs -> rpm [ 4s] breaking dependency rpm-libs -> rpm [ 4s] done [ 11s] booting kvm ... [ 11s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8192 -drive file=/srv/build/root_2/root,if=virtio,cache=none -drive file=/srv/build/root_2/root,if=ide,index=0,cache=none -drive file=/srv/build/root_2/swap,if=virtio,cache=none -smp 4 [ 13s] [ 0.000000] tsc: Fast TSC calibration failed [ 14s] doing fast boot [ 14s] Creating device nodes with udev [ 16s] Waiting for device /dev/vda to appear: ok [ 16s] fsck from util-linux 2.21.2 [ 16s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 16s] /dev/vda: clean, 4689/2392064 files, 237226/9568256 blocks [ 16s] fsck succeeded. Mounting root device read-write. [ 16s] Mounting root /dev/vda [ 16s] mount -o rw -t ext4 /dev/vda /root [ 16s] replacing /etc/mtab with symlink to /proc/self/mounts [ 16s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 18s] 2nd stage started in virtual machine [ 18s] machine type: armv7l [ 18s] switching personality to 8... [ 19s] 2nd stage started in virtual machine [ 19s] machine type: armv7l [ 19s] /.build/build: line 770: mount: command not found [ 19s] swapon on /dev/vdb [ 19s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 19s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 20s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 23s] logging output to //.build.log... [ 24s] processing specfile /.build-srcdir/_service:gbs:perl-Test-Pod-Coverage.spec ... [ 24s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:perl-Test-Pod-Coverage.spec build rpmlint-Factory ... [ 47s] running rpm-x86-arm postinstall script [ 48s] running rpm-libs-x86-arm postinstall script [ 49s] running tizen-accelerator postinstall script [ 50s] running bash-x86-arm postinstall script [ 50s] initializing rpm db... [ 56s] [1/142] installing cross-armv7l-platformfile-0.0.1-1.1 [ 57s] [2/142] installing kernel-headers-linux-3.0-3.0.101-14.39 [ 67s] [3/142] installing tizen-release-2.2.0-1.1 [ 71s] [4/142] installing tzdata-2013h-1.79 [ 73s] [5/142] installing libgcc-4.6.4-1.4 [ 74s] [6/142] installing setup-0.1-1.1 [ 74s] [7/142] installing filesystem-0.1-1.1 [ 75s] warning: group lock does not exist - using root [ 76s] [8/142] installing eglibc-2.13-1.1 [ 77s] [9/142] installing libstdc++-4.6.4-1.4 [ 78s] [10/142] installing eglibc-common-2.13-1.1 [ 82s] [11/142] installing libstdc++-devel-4.6.4-1.4 [ 83s] [12/142] installing bash-4.1-1.31 [ 85s] [13/142] installing bzip2-libs-1.0.5-1.1 [ 85s] [14/142] installing cpio-2.8-1.74 [ 85s] [15/142] installing diffutils-3.0-1.28 [ 87s] [16/142] installing e2fsprogs-libs-1.41.9-1.42 [ 88s] [17/142] installing elfutils-libelf-0.152-1.1 [ 88s] [18/142] installing fdupes-1.40-1.34 [ 89s] [19/142] installing findutils-4.2.31-2.78 [ 98s] [20/142] installing gdbm-1.8.3-1.1 [ 99s] [21/142] installing libattr-2.4.44-1.1 [ 99s] [22/142] installing libgomp-4.6.4-1.4 [ 100s] [23/142] installing liblua-5.1.4-1.1 [ 101s] [24/142] installing libuuid-2.20.2-1.55 [ 101s] [25/142] installing lzo-2.03-1.1 [ 102s] [26/142] installing m4-1.4.14-1.31 [ 103s] [27/142] installing net-tools-1.60-2.70 [ 105s] [28/142] installing nspr-4.9-1.1 [ 106s] [29/142] installing nss-softokn-freebl-3.12.9-1.2 [ 107s] [30/142] installing patch-2.6-1.80 [ 112s] [31/142] installing pkg-config-0.25-1.1 [ 112s] [32/142] installing popt-1.16-1.1 [ 113s] [33/142] installing readline-5.2-1.1 [ 113s] [34/142] installing sed-4.1.5-1.24 [ 114s] [35/142] installing sqlite-3.7.13-1.1 [ 115s] [36/142] installing tar-1.17-1.1 [ 115s] [37/142] installing xz-libs-5.0.3-1.1 [ 115s] [38/142] installing zlib-1.2.5-1.1 [ 116s] [39/142] installing gmp-4.2.1-1.1 [ 116s] [40/142] installing libpcre-7.7-1.1 [ 117s] [41/142] installing ncurses-libs-5.7-1.1 [ 118s] [42/142] installing build-compare-2009.10.14-1.1 [ 118s] [43/142] installing qemu.x86_64-1.2-2.1 [ 124s] [44/142] installing eglibc-headers-2.13-1.1 [ 126s] [45/142] installing libcap-2.21-1.1 [ 127s] [46/142] installing unzip-6.0-1.1 [ 127s] [47/142] installing zlib-devel-1.2.5-1.1 [ 130s] [48/142] installing grep-2.5.1a-1.26 [ 130s] [49/142] installing libacl-2.2.49-1.1 [ 131s] [50/142] installing libfile-5.04-1.1 [ 132s] [51/142] installing lzo-minilzo-2.03-1.1 [ 132s] [52/142] installing make-3.82-1.1 [ 133s] [53/142] installing mpfr-3.0.0-1.1 [ 133s] [54/142] installing ncurses-5.7-1.1 [ 134s] [55/142] installing bzip2-1.0.5-1.1 [ 134s] [56/142] installing libblkid-2.20.2-1.55 [ 135s] [57/142] installing xz-5.0.3-1.1 [ 135s] [58/142] installing binutils-2.22-1.1 [ 136s] [59/142] installing elfutils-libs-0.152-1.1 [ 136s] [60/142] installing nss-3.12.9-1.2 [ 137s] [61/142] installing perl-5.12.1-1.1 [ 146s] [62/142] installing ncurses-base-5.7-1.1 [ 146s] [63/142] installing perl-Devel-Symdump-2.08-1.1 [ 147s] [64/142] installing perl-HTML-Tagset-3.20-1.1 [ 147s] [65/142] installing perl-IO-Compress-Base-2.008-1.1 [ 147s] [66/142] installing perl-Module-Pluggable-3.60-1.1 [ 148s] [67/142] installing perl-Pod-Escapes-1.04-1.1 [ 148s] [68/142] installing perl-TimeDate-1.20-1.1 [ 149s] [69/142] installing eglibc-devel-2.13-1.1 [ 149s] [70/142] installing file-5.04-1.1 [ 149s] [71/142] installing lzo-devel-2.03-1.1 [ 149s] [72/142] installing perl-Compress-Raw-Zlib-2.008-1.1 [ 149s] [73/142] installing perl-devel-5.12.1-1.1 [ 150s] [74/142] installing perl-libs-5.12.1-1.1 [ 150s] [75/142] installing coreutils-6.9-1.1 [ 159s] [76/142] installing libmount-2.20.2-1.55 [ 160s] [77/142] installing mpc-0.9-1.1 [ 160s] [78/142] installing xz-lzma-compat-5.0.3-1.1 [ 160s] [79/142] installing elfutils-0.152-1.1 [ 161s] [80/142] installing nss-sysinit-3.12.9-1.2 [ 162s] [81/142] installing rpm-libs-4.9.1-1.28 [ 162s] [82/142] installing perl-ExtUtils-ParseXS-2.18-1.1 [ 166s] [83/142] installing perl-Pod-Coverage-0.20-1.1 [ 169s] [84/142] installing perl-Pod-Simple-3.07-1.1 [ 170s] [85/142] installing perl-Test-Simple-0.80-1.1 [ 172s] [86/142] installing tizen-accelerator-1.0.1-1.1 [ 173s] [87/142] installing perl-IO-Compress-Zlib-2.008-1.1 [ 173s] [88/142] installing perl-Test-Harness-3.12-1.1 [ 174s] [89/142] installing gawk-3.1.5-1.1 [ 174s] [90/142] installing gzip-1.3.12-1.28 [ 174s] [91/142] installing build-2011.01.10a-1.1 [ 174s] [92/142] installing rpm-4.9.1-1.28 [ 175s] [93/142] installing cpp-4.6.4-1.4 [ 175s] [94/142] installing util-linux-2.20.2-1.55 [ 176s] [95/142] installing bzip2-libs-x86-arm-1.0.5-1.1 [ 176s] [96/142] installing eglibc-x86-arm-2.13-1.1 [ 177s] [97/142] installing elfutils-libelf-x86-arm-0.152-1.1 [ 178s] [98/142] installing elfutils-libs-x86-arm-0.152-1.1 [ 178s] [99/142] installing gmp-x86-arm-4.2.1-1.1 [ 179s] [100/142] installing libacl-x86-arm-2.2.49-1.1 [ 179s] [101/142] installing libattr-x86-arm-2.4.44-1.1 [ 179s] [102/142] installing libcap-x86-arm-2.21-1.1 [ 179s] [103/142] installing libfile-x86-arm-5.04-1.1 [ 180s] [104/142] installing libgcc-x86-arm-4.6.4-1.1 [ 180s] [105/142] installing liblua-x86-arm-5.1.4-1.1 [ 181s] [106/142] installing mpc-x86-arm-0.9-1.1 [ 181s] [107/142] installing mpfr-x86-arm-3.0.0-1.1 [ 181s] [108/142] installing ncurses-libs-x86-arm-5.7-1.1 [ 181s] [109/142] installing nspr-x86-arm-4.9-1.1 [ 181s] [110/142] installing nss-softokn-freebl-x86-arm-3.12.9-1.1 [ 182s] [111/142] installing nss-x86-arm-3.12.9-1.1 [ 183s] [112/142] installing perl-ExtUtils-MakeMaker-6.36-1.1 [ 183s] [113/142] installing perl-Test-Pod-1.42-1.1 [ 183s] [114/142] installing popt-x86-arm-1.16-1.1 [ 184s] [115/142] installing rpm-libs-x86-arm-4.9.1-1.1 [ 184s] [116/142] installing sqlite-x86-arm-3.7.13-1.1 [ 184s] [117/142] installing xz-libs-x86-arm-5.0.3-1.1 [ 185s] [118/142] installing zlib-x86-arm-1.2.5-1.1 [ 185s] [119/142] installing gcc-4.6.4-1.4 [ 186s] [120/142] installing rpm-build-4.9.1-1.28 [ 187s] [121/142] installing perl-CPAN-1.9205-1.1 [ 189s] [122/142] installing bash-x86-arm-4.1-1.1 [ 189s] [123/142] installing fdupes-x86-arm-1.40-1.1 [ 190s] [124/142] installing findutils-x86-arm-4.2.31-1.1 [ 190s] [125/142] installing gawk-x86-arm-3.1.5-1.1 [ 191s] [126/142] installing gzip-x86-arm-1.3.12-1.1 [ 192s] [127/142] installing make-x86-arm-3.82-1.1 [ 200s] [128/142] installing sed-x86-arm-4.1.5-1.1 [ 200s] [129/142] installing tar-x86-arm-1.17-1.1 [ 200s] [130/142] installing diffutils-x86-arm-3.0-1.1 [ 200s] [131/142] installing patch-x86-arm-2.6-1.1 [ 201s] [132/142] installing autoconf-2.68-1.1 [ 201s] [133/142] installing coreutils-x86-arm-6.9-1.1 [ 204s] [134/142] installing file-x86-arm-5.04-1.1 [ 205s] [135/142] installing elfutils-x86-arm-0.152-1.1 [ 206s] [136/142] installing gcc-c++-4.6.4-1.4 [ 207s] [137/142] installing rpm-x86-arm-4.9.1-1.1 [ 207s] /bin/rpm.orig-arm already present - skipping. [ 207s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 207s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 207s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 207s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 207s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 207s] [138/142] installing rpm-build-x86-arm-4.9.1-1.1 [ 207s] [139/142] installing automake-1.11.1-1.1 [ 207s] [140/142] installing cross-armv7l-gcc-accel-x86-armv7l-4.6.4-1.1 [ 211s] "GCCVER: 4.6.4 GCCVER_NEW: 4.6.4 " [ 211s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 211s] cp: cannot stat `/emul/ia32-linux/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/cc1': No such file or directory [ 211s] cp: cannot stat `/emul/ia32-linux/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/cc1plus': No such file or directory [ 211s] cp: cannot stat `/emul/ia32-linux/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/collect2': No such file or directory [ 211s] cp: cannot stat `/emul/ia32-linux/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/lto-wrapper': No such file or directory [ 211s] cp: cannot stat `/emul/ia32-linux/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/lto1': No such file or directory [ 211s] warning: %post(cross-armv7l-gcc-accel-x86-armv7l-4.6.4-1.1.armv7l) scriptlet failed, exit status 1 [ 212s] [141/142] installing libtool-2.2.6b-1.1 [ 212s] [142/142] installing cross-armv7l-binutils-accel-x86-armv7l-2.22-1.3 [ 213s] removing nis flags from //etc/nsswitch.conf... [ 213s] now finalizing build dir... [ 213s] /.build/build: line 2585: mount: command not found [ 213s] /.build/build: line 2586: mount: command not found [ 217s] Warning: spec file parser line 12: can't expand %(...) [ 217s] Warning: spec file parser line 17: can't expand %(...) [ 219s] build target is armv7l-tizen-linux [ 219s] ----------------------------------------------------------------- [ 219s] I have the following modifications for perl-Test-Pod-Coverage.spec: [ 219s] 5c5 [ 219s] < Release: 5 [ 219s] --- [ 219s] > Release: 1.1 [ 219s] 54a55 [ 219s] > %changelog [ 219s] ----------------------------------------------------------------- [ 219s] ----- building perl-Test-Pod-Coverage.spec (user abuild) [ 219s] ----------------------------------------------------------------- [ 219s] ----------------------------------------------------------------- [ 220s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.3:Mobile/target/7735e397a9c635cda098f2b9858c284d-perl-Test-Pod-Coverage' /home/abuild/rpmbuild/SOURCES/perl-Test-Pod-Coverage.spec [ 220s] sh: @__ID_U@: command not found [ 220s] sh: @__ID_U@: command not found [ 220s] Building target platforms: armv7l-tizen-linux [ 220s] Building for target armv7l-tizen-linux [ 220s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.fLv4iO [ 220s] + umask 022 [ 220s] + cd /home/abuild/rpmbuild/BUILD [ 220s] + LANG=C [ 220s] + export LANG [ 220s] + unset DISPLAY [ 220s] + cd /home/abuild/rpmbuild/BUILD [ 220s] + rm -rf Test-Pod-Coverage-1.08 [ 220s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/Test-Pod-Coverage-1.08.tar.gz [ 220s] + /bin/tar -xf - [ 220s] + STATUS=0 [ 220s] + '[' 0 -ne 0 ']' [ 220s] + cd Test-Pod-Coverage-1.08 [ 220s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 220s] + exit 0 [ 220s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.RHBGNx [ 220s] + umask 022 [ 220s] + cd /home/abuild/rpmbuild/BUILD [ 220s] + cd Test-Pod-Coverage-1.08 [ 220s] + LANG=C [ 220s] + export LANG [ 220s] + unset DISPLAY [ 220s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 220s] + export CFLAGS [ 220s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 220s] + export CXXFLAGS [ 220s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 220s] + export FFLAGS [ 220s] + LD_AS_NEEDED=1 [ 220s] + export LD_AS_NEEDED [ 220s] + /usr/bin/perl Makefile.PL INSTALLDIRS=vendor [ 221s] Checking if your kit is complete... [ 221s] Looks good [ 221s] Writing Makefile for Test::Pod::Coverage [ 221s] + make -j4 [ 223s] cp Coverage.pm blib/lib/Test/Pod/Coverage.pm [ 224s] Manifying blib/man3/Test::Pod::Coverage.3pm [ 224s] + exit 0 [ 224s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.pIxb9w [ 224s] + umask 022 [ 224s] + cd /home/abuild/rpmbuild/BUILD [ 224s] + cd Test-Pod-Coverage-1.08 [ 224s] + LANG=C [ 224s] + export LANG [ 224s] + unset DISPLAY [ 224s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.1.arm [ 224s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.1.arm [ 224s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.1.arm [ 224s] + make pure_install PERL_INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.1.arm [ 226s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.1.arm/usr/lib/perl5/vendor_perl/5.12.1/Test/Pod/Coverage.pm [ 226s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.1.arm/usr/share/man/man3/Test::Pod::Coverage.3pm [ 226s] + find /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.1.arm -type f -name .packlist -exec rm -f '{}' ';' [ 226s] + find /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.1.arm -type d -depth -exec rmdir '{}' ';' [ 226s] + chmod -R u+w /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.1.arm/usr [ 226s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/Test-Pod-Coverage-1.08 [ 226s] + /usr/lib/rpm/check-buildroot [ 226s] + /usr/lib/rpm//brp-compress [ 226s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 226s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 226s] + /usr/lib/rpm/brp-python-hardlink [ 226s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.1.arm [ 226s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.8EA7oC [ 226s] + umask 022 [ 226s] + cd /home/abuild/rpmbuild/BUILD [ 226s] + cd Test-Pod-Coverage-1.08 [ 226s] + unset DISPLAY [ 226s] + make test [ 226s] PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t [ 228s] # Testing Test::Pod::Coverage 1.08 [ 228s] t/00.load.t .............. ok [ 228s] t/all_modules.t .......... ok [ 229s] t/all_pod_coverage_ok.t .. ok [ 230s] t/alt_class.t ............ ok [ 231s] t/nopod.t ................ ok [ 232s] t/nosymbols.t ............ ok [ 233s] t/parms.t ................ ok [ 233s] t/pod.t .................. ok [ 234s] t/privates.t ............. ok [ 235s] t/self.t ................. ok [ 236s] t/simple.t ............... ok [ 236s] All tests successful. [ 236s] Files=11, Tests=23, 9 wallclock secs ( 0.42 usr 0.03 sys + 9.00 cusr 0.11 csys = 9.56 CPU) [ 236s] Result: PASS [ 236s] + exit 0 [ 236s] Processing files: perl-Test-Pod-Coverage-1.08-1.1.noarch [ 236s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.HAc81k [ 236s] + umask 022 [ 236s] + cd /home/abuild/rpmbuild/BUILD [ 236s] + cd Test-Pod-Coverage-1.08 [ 236s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.1.arm/usr/share/doc/perl-Test-Pod-Coverage-1.08 [ 236s] + export DOCDIR [ 236s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.1.arm/usr/share/doc/perl-Test-Pod-Coverage-1.08 [ 236s] + cp -pr Changes /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.1.arm/usr/share/doc/perl-Test-Pod-Coverage-1.08 [ 236s] + exit 0 [ 236s] Provides: perl(Test::Pod::Coverage) = 1.08 [ 236s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 236s] Requires: perl(Pod::Coverage) perl(Test::Builder) perl(strict) perl(warnings) [ 236s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.1.arm [ 236s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-Test-Pod-Coverage-1.08-1.1.src.rpm [ 236s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/perl-Test-Pod-Coverage-1.08-1.1.noarch.rpm [ 236s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.4FY0Ix [ 236s] + umask 022 [ 236s] + cd /home/abuild/rpmbuild/BUILD [ 236s] + cd Test-Pod-Coverage-1.08 [ 236s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.1.arm [ 236s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.1.arm [ 236s] + exit 0 [ 236s] ... checking for files with abuild user/group [ 236s] ... creating baselibs [ 237s] ... saving built statistics [ 237s] /.build/build: line 3144: mount: command not found [ 237s] ERROR: no root disk device found, yet another new device name? [ 237s] ls: cannot access /sys/block/: No such file or directory [ 237s] /.build/build: line 3159: umount: command not found [ 237s] ... saving built packages [ 238s] /home/abuild/rpmbuild/RPMS/noarch/perl-Test-Pod-Coverage-1.08-1.1.noarch.rpm [ 238s] /home/abuild/rpmbuild/SRPMS/perl-Test-Pod-Coverage-1.08-1.1.src.rpm [ 238s] /home/abuild/rpmbuild/OTHER/_statistics [ 238s] [ 238s] w25 finished "build perl-Test-Pod-Coverage.spec" at Tue Feb 3 09:23:46 UTC 2015. [ 238s] [ 242s] [ 228.796812] SysRq : Power Off [ 242s] [ 228.805028] Power down. [ 242s] build: extracting built packages... [ 242s] perl-Test-Pod-Coverage-1.08-1.1.noarch.rpm [ 242s] perl-Test-Pod-Coverage-1.08-1.1.src.rpm [ 242s] _statistics Retried build at Tue Feb 3 11:51:50 2015 returned same result, skipped