[ 0s] Using BUILD_ROOT=/srv/build/root_1/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_1/root [ 0s] [ 0s] [ 0s] w05 started "build _service:gbs:perl-XML-Parser.spec" at Tue Feb 3 19:48:19 UTC 2015. [ 0s] [ 0s] Building perl-XML-Parser for project 'Tizen:2.3:Mobile' repository 'target' arch 'armv7l' srcmd5 'a457f45112cdd13579ee647e81ea11eb' [ 0s] [ 0s] processing specfile /srv/build/root_1/.build-srcdir/_service:gbs:perl-XML-Parser.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_1/.build-srcdir/_service:gbs:perl-XML-Parser.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_1/.build.rpmlist /srv/build/root_1/.build-srcdir/_service:gbs:perl-XML-Parser.spec build rpmlint-Factory ... [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc-common -> eglibc [ 0s] cycle: libgcc -> eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: libgcc -> eglibc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/57] preinstalling tizen-release... [ 0s] [2/57] preinstalling libgcc... [ 0s] [3/57] preinstalling setup... [ 0s] [4/57] preinstalling filesystem... [ 0s] [5/57] preinstalling eglibc... [ 1s] [6/57] preinstalling eglibc-common... [ 1s] [7/57] preinstalling bash... [ 1s] [8/57] preinstalling bzip2-libs... [ 1s] [9/57] preinstalling diffutils... [ 1s] [10/57] preinstalling elfutils-libelf... [ 1s] [11/57] preinstalling libattr... [ 1s] [12/57] preinstalling liblua... [ 1s] [13/57] preinstalling libstdc++... [ 1s] [14/57] preinstalling ncurses-libs... [ 1s] [15/57] preinstalling nspr... [ 1s] [16/57] preinstalling nss-softokn-freebl... [ 1s] [17/57] preinstalling popt... [ 1s] [18/57] preinstalling readline... [ 1s] [19/57] preinstalling sed... [ 1s] [20/57] preinstalling sqlite... [ 1s] [21/57] preinstalling tar... [ 1s] [22/57] preinstalling xz-libs... [ 1s] [23/57] preinstalling zlib... [ 1s] [24/57] preinstalling qemu.x86_64... [ 1s] [25/57] preinstalling libcap... [ 1s] [26/57] preinstalling libacl... [ 1s] [27/57] preinstalling libfile... [ 1s] [28/57] preinstalling bzip2... [ 1s] [29/57] preinstalling nss... [ 1s] [30/57] preinstalling file... [ 1s] [31/57] preinstalling coreutils... [ 1s] [32/57] preinstalling rpm-libs... [ 2s] [33/57] preinstalling tizen-accelerator... [ 2s] [34/57] preinstalling rpm... [ 2s] [35/57] preinstalling gmp-x86-arm... [ 2s] [36/57] preinstalling mpc-x86-arm... [ 2s] [37/57] preinstalling mpfr-x86-arm... [ 2s] [38/57] preinstalling bzip2-libs-x86-arm... [ 2s] [39/57] preinstalling eglibc-x86-arm... [ 2s] [40/57] preinstalling elfutils-libelf-x86-arm... [ 2s] [41/57] preinstalling libacl-x86-arm... [ 2s] [42/57] preinstalling libattr-x86-arm... [ 2s] [43/57] preinstalling libcap-x86-arm... [ 2s] [44/57] preinstalling libfile-x86-arm... [ 2s] [45/57] preinstalling libgcc-x86-arm... [ 2s] [46/57] preinstalling liblua-x86-arm... [ 2s] [47/57] preinstalling ncurses-libs-x86-arm... [ 2s] [48/57] preinstalling nspr-x86-arm... [ 2s] [49/57] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [50/57] preinstalling nss-x86-arm... [ 2s] [51/57] preinstalling popt-x86-arm... [ 2s] [52/57] preinstalling rpm-libs-x86-arm... [ 2s] [53/57] preinstalling sqlite-x86-arm... [ 2s] [54/57] preinstalling xz-libs-x86-arm... [ 2s] [55/57] preinstalling zlib-x86-arm... [ 2s] [56/57] preinstalling bash-x86-arm... [ 2s] [57/57] preinstalling rpm-x86-arm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 2s] copying packages... [ 3s] reordering...cycle: bash -> eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> bash [ 3s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 3s] breaking dependency eglibc-common -> coreutils [ 3s] cycle: eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> findutils [ 3s] breaking dependency eglibc-common -> findutils [ 3s] cycle: eglibc -> eglibc-common -> grep [ 3s] breaking dependency grep -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 3s] breaking dependency grep -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 3s] breaking dependency libpcre -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 3s] breaking dependency libpcre -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 3s] breaking dependency libstdc++ -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 3s] breaking dependency eglibc-common -> grep [ 3s] cycle: eglibc -> eglibc-common -> libgcc [ 3s] breaking dependency eglibc -> eglibc-common [ 3s] cycle: eglibc -> libgcc [ 3s] breaking dependency libgcc -> eglibc [ 3s] cycle: filesystem -> setup [ 3s] breaking dependency setup -> filesystem [ 3s] cycle: ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses [ 3s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses-base [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl -> perl-libs [ 3s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 3s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl -> perl-IO-Compress-Zlib [ 3s] breaking dependency perl -> perl-IO-Compress-Zlib [ 3s] cycle: perl -> perl-IO-Compress-Base [ 3s] breaking dependency perl -> perl-IO-Compress-Base [ 3s] cycle: perl -> perl-Module-Pluggable [ 3s] breaking dependency perl -> perl-Module-Pluggable [ 3s] cycle: perl -> perl-Pod-Simple [ 3s] breaking dependency perl -> perl-Pod-Simple [ 3s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 3s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 3s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 3s] cycle: nss -> nss-sysinit [ 3s] breaking dependency nss -> nss-sysinit [ 3s] cycle: perl-CPAN -> perl-Test-Harness [ 3s] breaking dependency perl-Test-Harness -> perl-CPAN [ 3s] cycle: rpm-libs -> rpm [ 3s] breaking dependency rpm-libs -> rpm [ 3s] done [ 3s] booting kvm ... [ 3s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 16000 -drive file=/srv/build/root_1/root,if=virtio,cache=none -drive file=/srv/build/root_1/root,if=ide,index=0,cache=none -drive file=/srv/build/root_1/swap,if=virtio,cache=none -smp 8 [ 5s] doing fast boot [ 5s] Creating device nodes with udev [ 6s] Waiting for device /dev/vda to appear: ok [ 6s] fsck from util-linux 2.21.2 [ 6s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 6s] /dev/vda: clean, 4680/2392064 files, 237276/9568256 blocks [ 6s] fsck succeeded. Mounting root device read-write. [ 6s] Mounting root /dev/vda [ 6s] mount -o rw -t ext4 /dev/vda /root [ 6s] replacing /etc/mtab with symlink to /proc/self/mounts [ 6s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 6s] 2nd stage started in virtual machine [ 6s] machine type: armv7l [ 6s] switching personality to 8... [ 6s] 2nd stage started in virtual machine [ 6s] machine type: armv7l [ 6s] /.build/build: line 770: mount: command not found [ 6s] swapon on /dev/vdb [ 6s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 6s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 7s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 7s] logging output to //.build.log... [ 7s] processing specfile /.build-srcdir/_service:gbs:perl-XML-Parser.spec ... [ 7s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:perl-XML-Parser.spec build rpmlint-Factory ... [ 7s] running rpm-x86-arm postinstall script [ 7s] running rpm-libs-x86-arm postinstall script [ 7s] running tizen-accelerator postinstall script [ 8s] running bash-x86-arm postinstall script [ 8s] initializing rpm db... [ 11s] [1/141] installing cross-armv7l-platformfile-0.0.1-1.1 [ 11s] [2/141] installing kernel-headers-linux-3.0-3.0.101-1.1 [ 11s] [3/141] installing tizen-release-2.2.0-1.1 [ 11s] [4/141] installing tzdata-2013h-1.1 [ 11s] [5/141] installing libgcc-4.6.4-1.15 [ 11s] [6/141] installing setup-0.1-1.1 [ 11s] [7/141] installing filesystem-0.1-1.1 [ 11s] warning: group lock does not exist - using root [ 11s] [8/141] installing eglibc-2.13-1.11 [ 12s] [9/141] installing libstdc++-4.6.4-1.15 [ 12s] [10/141] installing eglibc-common-2.13-1.11 [ 12s] [11/141] installing libstdc++-devel-4.6.4-1.15 [ 12s] [12/141] installing bash-4.1-1.1 [ 12s] [13/141] installing bzip2-libs-1.0.5-1.2 [ 12s] [14/141] installing cpio-2.8-1.1 [ 12s] [15/141] installing diffutils-3.0-1.1 [ 12s] [16/141] installing e2fsprogs-libs-1.41.9-1.2 [ 12s] [17/141] installing elfutils-libelf-0.152-1.9 [ 13s] [18/141] installing expat-2.0.1-1.2 [ 13s] [19/141] installing fdupes-1.40-1.1 [ 13s] [20/141] installing findutils-4.2.31-1.1 [ 13s] [21/141] installing gdbm-1.8.3-1.3 [ 13s] [22/141] installing libattr-2.4.44-1.2 [ 13s] [23/141] installing libgomp-4.6.4-1.15 [ 13s] [24/141] installing liblua-5.1.4-1.2 [ 13s] [25/141] installing libuuid-2.20.2-1.1 [ 13s] [26/141] installing lzo-2.03-1.3 [ 13s] [27/141] installing m4-1.4.14-1.1 [ 13s] [28/141] installing net-tools-1.60-1.2 [ 13s] [29/141] installing nspr-4.9-1.10 [ 13s] [30/141] installing nss-softokn-freebl-3.12.9-1.13 [ 13s] [31/141] installing patch-2.6-1.1 [ 13s] [32/141] installing pkg-config-0.25-1.2 [ 14s] [33/141] installing popt-1.16-1.2 [ 14s] [34/141] installing readline-5.2-1.2 [ 14s] [35/141] installing sed-4.1.5-1.1 [ 14s] [36/141] installing sqlite-3.7.13-1.2 [ 14s] [37/141] installing tar-1.17-1.2 [ 14s] [38/141] installing xz-libs-5.0.3-1.3 [ 14s] [39/141] installing zlib-1.2.5-1.10 [ 14s] [40/141] installing gmp-4.2.1-1.2 [ 14s] [41/141] installing libpcre-7.7-1.3 [ 14s] [42/141] installing ncurses-libs-5.7-1.2 [ 14s] [43/141] installing build-compare-2009.10.14-1.5 [ 14s] [44/141] installing expat-devel-2.0.1-1.2 [ 14s] [45/141] installing qemu.x86_64-1.2-2.1 [ 15s] [46/141] installing eglibc-headers-2.13-1.11 [ 16s] [47/141] installing libcap-2.21-1.2 [ 16s] [48/141] installing unzip-6.0-1.7 [ 16s] [49/141] installing zlib-devel-1.2.5-1.10 [ 16s] [50/141] installing grep-2.5.1a-1.1 [ 16s] [51/141] installing libacl-2.2.49-1.2 [ 16s] [52/141] installing libfile-5.04-1.2 [ 16s] [53/141] installing lzo-minilzo-2.03-1.3 [ 16s] [54/141] installing make-3.82-1.2 [ 16s] [55/141] installing mpfr-3.0.0-1.2 [ 16s] [56/141] installing ncurses-5.7-1.2 [ 16s] [57/141] installing bzip2-1.0.5-1.2 [ 16s] [58/141] installing libblkid-2.20.2-1.1 [ 17s] [59/141] installing xz-5.0.3-1.3 [ 17s] [60/141] installing binutils-2.22-1.5 [ 17s] [61/141] installing elfutils-libs-0.152-1.9 [ 17s] [62/141] installing nss-3.12.9-1.13 [ 17s] [63/141] installing perl-5.12.1-1.4 [ 18s] [64/141] installing ncurses-base-5.7-1.2 [ 18s] [65/141] installing perl-HTML-Tagset-3.20-1.1 [ 18s] [66/141] installing perl-IO-Compress-Base-2.008-1.4 [ 18s] [67/141] installing perl-Module-Pluggable-3.60-1.4 [ 18s] [68/141] installing perl-Pod-Escapes-1.04-1.4 [ 18s] [69/141] installing perl-TimeDate-1.20-1.1 [ 18s] [70/141] installing eglibc-devel-2.13-1.11 [ 18s] [71/141] installing file-5.04-1.2 [ 18s] [72/141] installing lzo-devel-2.03-1.3 [ 18s] [73/141] installing perl-Compress-Raw-Zlib-2.008-1.4 [ 18s] [74/141] installing perl-devel-5.12.1-1.4 [ 18s] [75/141] installing perl-libs-5.12.1-1.4 [ 18s] [76/141] installing coreutils-6.9-1.5 [ 19s] [77/141] installing libmount-2.20.2-1.1 [ 19s] [78/141] installing mpc-0.9-1.2 [ 19s] [79/141] installing xz-lzma-compat-5.0.3-1.3 [ 19s] [80/141] installing elfutils-0.152-1.9 [ 19s] [81/141] installing nss-sysinit-3.12.9-1.13 [ 19s] [82/141] installing rpm-libs-4.9.1-1.1 [ 19s] [83/141] installing perl-ExtUtils-ParseXS-2.18-1.4 [ 19s] [84/141] installing perl-Pod-Simple-3.07-1.4 [ 19s] [85/141] installing perl-Test-Simple-0.80-1.4 [ 19s] [86/141] installing tizen-accelerator-1.0.1-1.1 [ 19s] [87/141] installing perl-IO-Compress-Zlib-2.008-1.4 [ 20s] [88/141] installing perl-Test-Harness-3.12-1.4 [ 20s] [89/141] installing gawk-3.1.5-1.4 [ 20s] [90/141] installing gzip-1.3.12-1.1 [ 20s] [91/141] installing build-2011.01.10a-1.1 [ 20s] [92/141] installing rpm-4.9.1-1.1 [ 20s] [93/141] installing cpp-4.6.4-1.15 [ 20s] [94/141] installing util-linux-2.20.2-1.1 [ 21s] [95/141] installing bzip2-libs-x86-arm-1.0.5-1.1 [ 21s] [96/141] installing eglibc-x86-arm-2.13-1.2 [ 21s] [97/141] installing elfutils-libelf-x86-arm-0.152-1.1 [ 21s] [98/141] installing elfutils-libs-x86-arm-0.152-1.2 [ 21s] [99/141] installing gmp-x86-arm-4.2.1-1.1 [ 21s] [100/141] installing libacl-x86-arm-2.2.49-1.1 [ 21s] [101/141] installing libattr-x86-arm-2.4.44-1.1 [ 22s] [102/141] installing libcap-x86-arm-2.21-1.1 [ 22s] [103/141] installing libfile-x86-arm-5.04-1.2 [ 22s] [104/141] installing libgcc-x86-arm-4.6.4-1.1 [ 22s] [105/141] installing liblua-x86-arm-5.1.4-1.1 [ 22s] [106/141] installing mpc-x86-arm-0.9-1.1 [ 22s] [107/141] installing mpfr-x86-arm-3.0.0-1.1 [ 22s] [108/141] installing ncurses-libs-x86-arm-5.7-1.2 [ 22s] [109/141] installing nspr-x86-arm-4.9-1.2 [ 22s] [110/141] installing nss-softokn-freebl-x86-arm-3.12.9-1.2 [ 22s] [111/141] installing nss-x86-arm-3.12.9-1.2 [ 23s] [112/141] installing perl-ExtUtils-MakeMaker-6.36-1.4 [ 23s] [113/141] installing popt-x86-arm-1.16-1.1 [ 23s] [114/141] installing rpm-libs-x86-arm-4.9.1-1.2 [ 23s] [115/141] installing sqlite-x86-arm-3.7.13-1.1 [ 23s] [116/141] installing xz-libs-x86-arm-5.0.3-1.1 [ 23s] [117/141] installing zlib-x86-arm-1.2.5-1.1 [ 23s] [118/141] installing gcc-4.6.4-1.15 [ 23s] [119/141] installing rpm-build-4.9.1-1.1 [ 23s] [120/141] installing perl-CPAN-1.9205-1.4 [ 24s] [121/141] installing bash-x86-arm-4.1-1.1 [ 24s] [122/141] installing fdupes-x86-arm-1.40-1.1 [ 24s] [123/141] installing findutils-x86-arm-4.2.31-1.1 [ 24s] [124/141] installing gawk-x86-arm-3.1.5-1.2 [ 24s] [125/141] installing gzip-x86-arm-1.3.12-1.1 [ 24s] [126/141] installing make-x86-arm-3.82-1.1 [ 24s] [127/141] installing sed-x86-arm-4.1.5-1.1 [ 24s] [128/141] installing tar-x86-arm-1.17-1.2 [ 24s] [129/141] installing diffutils-x86-arm-3.0-1.1 [ 25s] [130/141] installing patch-x86-arm-2.6-1.1 [ 25s] [131/141] installing autoconf-2.68-1.1 [ 25s] [132/141] installing coreutils-x86-arm-6.9-1.1 [ 27s] [133/141] installing file-x86-arm-5.04-1.1 [ 27s] [134/141] installing elfutils-x86-arm-0.152-1.2 [ 27s] [135/141] installing gcc-c++-4.6.4-1.15 [ 27s] [136/141] installing rpm-x86-arm-4.9.1-1.2 [ 27s] /bin/rpm.orig-arm already present - skipping. [ 27s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 27s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 27s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 27s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 27s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 27s] [137/141] installing rpm-build-x86-arm-4.9.1-1.2 [ 27s] [138/141] installing automake-1.11.1-1.1 [ 27s] [139/141] installing cross-armv7l-gcc-accel-x86-armv7l-4.6.4-1.4 [ 28s] "GCCVER: 4.6.4 GCCVER_NEW: 4.6.4 " [ 28s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 28s] [140/141] installing libtool-2.2.6b-1.2 [ 28s] [141/141] installing cross-armv7l-binutils-accel-x86-armv7l-2.22-1.4 [ 29s] removing nis flags from //etc/nsswitch.conf... [ 29s] now finalizing build dir... [ 29s] /.build/build: line 2585: mount: command not found [ 29s] /.build/build: line 2586: mount: command not found [ 30s] Warning: spec file parser line 14: can't expand %(...) [ 32s] build target is armv7l-tizen-linux [ 32s] ----------------------------------------------------------------- [ 32s] I have the following modifications for perl-XML-Parser.spec: [ 32s] 4c4 [ 32s] < Release: 3 [ 32s] --- [ 32s] > Release: 1.1 [ 32s] ----------------------------------------------------------------- [ 32s] ----- building perl-XML-Parser.spec (user abuild) [ 32s] ----------------------------------------------------------------- [ 32s] ----------------------------------------------------------------- [ 32s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.3:Mobile/target/a457f45112cdd13579ee647e81ea11eb-perl-XML-Parser' /home/abuild/rpmbuild/SOURCES/perl-XML-Parser.spec [ 32s] Building target platforms: armv7l-tizen-linux [ 32s] Building for target armv7l-tizen-linux [ 32s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.ausRDX [ 32s] + umask 022 [ 32s] + cd /home/abuild/rpmbuild/BUILD [ 32s] + LANG=C [ 32s] + export LANG [ 32s] + unset DISPLAY [ 32s] + cd /home/abuild/rpmbuild/BUILD [ 32s] + rm -rf XML-Parser-2.36 [ 32s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/XML-Parser-2.36.tar.gz [ 32s] + /bin/tar -xf - [ 32s] + STATUS=0 [ 32s] + '[' 0 -ne 0 ']' [ 32s] + cd XML-Parser-2.36 [ 32s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 32s] + chmod 644 samples/canonical samples/xmlcomments samples/xmlfilter samples/xmlstats [ 32s] + /usr/bin/perl -pi -e 's|^#!/usr/local/bin/perl\b|#!/usr/bin/perl|' samples/canonical samples/xmlcomments samples/xmlfilter samples/xmlstats [ 32s] + exit 0 [ 32s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.vMBlvl [ 32s] + umask 022 [ 32s] + cd /home/abuild/rpmbuild/BUILD [ 32s] + cd XML-Parser-2.36 [ 32s] + LANG=C [ 32s] + export LANG [ 32s] + unset DISPLAY [ 32s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 32s] + export CFLAGS [ 32s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 32s] + export CXXFLAGS [ 32s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 32s] + export FFLAGS [ 32s] + LD_AS_NEEDED=1 [ 32s] + export LD_AS_NEEDED [ 32s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 32s] + /usr/bin/perl Makefile.PL INSTALLDIRS=vendor [ 34s] Warning: prerequisite LWP 0 not found. [ 34s] Checking if your kit is complete... [ 34s] Looks good [ 34s] Writing Makefile for XML::Parser::Expat [ 34s] Writing Makefile for XML::Parser [ 34s] + make -j8 'OPTIMIZE=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 34s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/XML-Parser-2.36/Expat' [ 34s] /usr/bin/perl /usr/lib/perl5/5.12.1/ExtUtils/xsubpp -noprototypes -typemap /usr/lib/perl5/5.12.1/ExtUtils/typemap -typemap typemap Expat.xs > Expat.xsc && mv Expat.xsc Expat.c [ 35s] Running Mkbootstrap for XML::Parser::Expat () [ 35s] cp Parser/Encodings/x-sjis-cp932.enc blib/lib/XML/Parser/Encodings/x-sjis-cp932.enc [ 35s] cp Parser/Encodings/iso-8859-7.enc blib/lib/XML/Parser/Encodings/iso-8859-7.enc [ 35s] cp Parser/Style/Tree.pm blib/lib/XML/Parser/Style/Tree.pm [ 35s] cp Parser/Encodings/iso-8859-9.enc blib/lib/XML/Parser/Encodings/iso-8859-9.enc [ 35s] cp Parser/Encodings/x-euc-jp-unicode.enc blib/lib/XML/Parser/Encodings/x-euc-jp-unicode.enc [ 35s] cp Parser/Encodings/README blib/lib/XML/Parser/Encodings/README [ 35s] cp Parser/Encodings/euc-kr.enc blib/lib/XML/Parser/Encodings/euc-kr.enc [ 35s] cp Parser/Encodings/windows-1250.enc blib/lib/XML/Parser/Encodings/windows-1250.enc [ 35s] cp Parser/Encodings/windows-1252.enc blib/lib/XML/Parser/Encodings/windows-1252.enc [ 35s] cp Parser/Encodings/big5.enc blib/lib/XML/Parser/Encodings/big5.enc [ 35s] cp Parser/Encodings/iso-8859-3.enc blib/lib/XML/Parser/Encodings/iso-8859-3.enc [ 35s] cp Parser/Encodings/Japanese_Encodings.msg blib/lib/XML/Parser/Encodings/Japanese_Encodings.msg [ 35s] cp Parser/Style/Subs.pm blib/lib/XML/Parser/Style/Subs.pm [ 35s] cp Parser/Encodings/x-euc-jp-jisx0221.enc blib/lib/XML/Parser/Encodings/x-euc-jp-jisx0221.enc [ 35s] cp Parser/Encodings/iso-8859-8.enc blib/lib/XML/Parser/Encodings/iso-8859-8.enc [ 35s] cp Parser/Encodings/iso-8859-4.enc blib/lib/XML/Parser/Encodings/iso-8859-4.enc [ 35s] cp Parser/Encodings/iso-8859-2.enc blib/lib/XML/Parser/Encodings/iso-8859-2.enc [ 35s] cp Parser/Encodings/x-sjis-jdk117.enc blib/lib/XML/Parser/Encodings/x-sjis-jdk117.enc [ 35s] cp Parser/Encodings/x-sjis-unicode.enc blib/lib/XML/Parser/Encodings/x-sjis-unicode.enc [ 35s] cp Parser/LWPExternEnt.pl blib/lib/XML/Parser/LWPExternEnt.pl [ 35s] cp Parser/Style/Objects.pm blib/lib/XML/Parser/Style/Objects.pm [ 35s] cp Parser.pm blib/lib/XML/Parser.pm [ 35s] cp Parser/Style/Debug.pm blib/lib/XML/Parser/Style/Debug.pm [ 35s] cp Parser/Encodings/x-sjis-jisx0221.enc blib/lib/XML/Parser/Encodings/x-sjis-jisx0221.enc [ 35s] cp Parser/Style/Stream.pm blib/lib/XML/Parser/Style/Stream.pm [ 35s] cp Parser/Encodings/iso-8859-5.enc blib/lib/XML/Parser/Encodings/iso-8859-5.enc [ 35s] chmod 644 Expat.bs [ 35s] cp Expat.bs ../blib/arch/auto/XML/Parser/Expat/Expat.bs [ 35s] chmod 644 ../blib/arch/auto/XML/Parser/Expat/Expat.bs [ 35s] cp Expat.pm ../blib/lib/XML/Parser/Expat.pm [ 36s] gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DVERSION=\"2.36\" -DXS_VERSION=\"2.36\" -fPIC "-I/usr/lib/perl5/5.12.1/arm-linux-thread-multi/CORE" Expat.c [ 36s] Expat.xs: In function 'append_error': [ 36s] Expat.xs:220:8: warning: format '%d' expects argument of type 'int', but argument 4 has type 'XML_Size' [-Wformat] [ 36s] Expat.xs:220:8: warning: format '%d' expects argument of type 'int', but argument 5 has type 'XML_Size' [-Wformat] [ 36s] Expat.xs:220:8: warning: format '%d' expects argument of type 'int', but argument 6 has type 'XML_Index' [-Wformat] [ 36s] Expat.xs: In function 'generate_model': [ 36s] Expat.xs:255:3: warning: value computed is not used [-Wunused-value] [ 36s] Expat.xs:257:5: warning: value computed is not used [-Wunused-value] [ 36s] Expat.xs:262:5: warning: value computed is not used [-Wunused-value] [ 36s] Expat.xs:277:2: warning: value computed is not used [-Wunused-value] [ 36s] Expat.xs:260:3: warning: enumeration value 'XML_CTYPE_EMPTY' not handled in switch [-Wswitch] [ 36s] Expat.xs:260:3: warning: enumeration value 'XML_CTYPE_ANY' not handled in switch [-Wswitch] [ 36s] Expat.xs: In function 'parse_stream': [ 36s] Expat.xs:299:10: warning: unused variable 'buff' [-Wunused-variable] [ 36s] Expat.xs: In function 'startElement': [ 36s] Expat.xs:485:9: warning: unused variable 'pnslst' [-Wunused-variable] [ 36s] Expat.xs:484:9: warning: unused variable 'pnstab' [-Wunused-variable] [ 36s] Expat.xs:481:9: warning: unused variable 'pcontext' [-Wunused-variable] [ 36s] Expat.xs: In function 'externalEntityRef': [ 36s] Expat.xs:1028:4: warning: value computed is not used [-Wunused-value] [ 36s] Expat.xs: In function 'unknownEncoding': [ 36s] Expat.xs:1146:9: warning: unused variable 'count' [-Wunused-variable] [ 36s] Expat.xs: In function 'XS_XML__Parser__Expat_ParseString': [ 36s] Expat.xs:1439:21: warning: variable 'cbv' set but not used [-Wunused-but-set-variable] [ 36s] Expat.xs: In function 'XS_XML__Parser__Expat_ParseStream': [ 36s] Expat.xs:1462:9: warning: unused variable 'delimsv' [-Wunused-variable] [ 36s] Expat.xs: In function 'XS_XML__Parser__Expat_ParsePartial': [ 36s] Expat.xs:1488:21: warning: unused variable 'cbv' [-Wunused-variable] [ 36s] Expat.xs: In function 'XS_XML__Parser__Expat_SetDoctypeHandler': [ 36s] Expat.xs:1740:8: warning: unused variable 'set' [-Wunused-variable] [ 36s] Expat.c: In function 'XS_XML__Parser__Expat_GetBase': [ 36s] Expat.c:2232:7: warning: unused variable 'RETVAL' [-Wunused-variable] [ 36s] Expat.xs: In function 'XS_XML__Parser__Expat_DefaultCurrent': [ 36s] Expat.xs:1920:21: warning: unused variable 'cbv' [-Wunused-variable] [ 36s] Expat.c: In function 'XS_XML__Parser__Expat_ErrorString': [ 36s] Expat.c:2571:2: warning: unused variable 'targ' [-Wunused-variable] [ 36s] Expat.c:2570:9: warning: unused variable 'RETVAL' [-Wunused-variable] [ 36s] Expat.xs: In function 'XS_XML__Parser__Expat_LoadEncoding': [ 36s] Expat.xs:2070:8: warning: value computed is not used [-Wunused-value] [ 36s] Expat.xs: In function 'XS_XML__Parser__Expat_Do_External_Parse': [ 36s] Expat.xs:2205:10: warning: unused variable 'pret' [-Wunused-variable] [ 36s] Expat.xs:2194:28: warning: unused variable 'cbv' [-Wunused-variable] [ 36s] Expat.xs:2192:8: warning: unused variable 'type' [-Wunused-variable] [ 36s] Expat.xs: In function 'parse_stream': [ 36s] Expat.xs:409:5: warning: 'tsiz' may be used uninitialized in this function [-Wuninitialized] [ 36s] Expat.xs:410:5: warning: 'tbuff' may be used uninitialized in this function [-Wuninitialized] [ 36s] Expat.xs:358:2: warning: 'linebuff' may be used uninitialized in this function [-Wuninitialized] [ 37s] Expat.c: In function 'XS_XML__Parser__Expat_Do_External_Parse': [ 37s] Expat.c:2942:13: warning: 'RETVAL' may be used uninitialized in this function [-Wuninitialized] [ 37s] Expat.c:2918:6: note: 'RETVAL' was declared here [ 39s] rm -f ../blib/arch/auto/XML/Parser/Expat/Expat.so [ 39s] gcc -shared -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DPERL_USE_SAFE_PUTENV -L/usr/local/lib Expat.o -o ../blib/arch/auto/XML/Parser/Expat/Expat.so \ [ 39s] -lexpat \ [ 39s] [ 39s] chmod 755 ../blib/arch/auto/XML/Parser/Expat/Expat.so [ 41s] Manifying ../blib/man3/XML::Parser::Expat.3pm [ 41s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/XML-Parser-2.36/Expat' [ 42s] Manifying blib/man3/XML::Parser::Style::Objects.3pm [ 42s] Manifying blib/man3/XML::Parser::Style::Debug.3pm [ 42s] Manifying blib/man3/XML::Parser.3pm [ 42s] Manifying blib/man3/XML::Parser::Style::Subs.3pm [ 42s] Manifying blib/man3/XML::Parser::Style::Tree.3pm [ 42s] Manifying blib/man3/XML::Parser::Style::Stream.3pm [ 42s] + exit 0 [ 42s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.UFVTab [ 42s] + umask 022 [ 42s] + cd /home/abuild/rpmbuild/BUILD [ 42s] + cd XML-Parser-2.36 [ 42s] + LANG=C [ 42s] + export LANG [ 42s] + unset DISPLAY [ 42s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm [ 42s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm [ 42s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm [ 42s] + make pure_install PERL_INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm [ 42s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/XML-Parser-2.36/Expat' [ 42s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/XML-Parser-2.36/Expat' [ 44s] Files found in blib/arch: installing files in blib/lib into architecture dependent library tree [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/auto/XML/Parser/Expat/Expat.so [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/auto/XML/Parser/Expat/Expat.bs [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/XML/Parser.pm [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/XML/Parser/Expat.pm [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/XML/Parser/LWPExternEnt.pl [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/XML/Parser/Encodings/windows-1252.enc [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/XML/Parser/Encodings/iso-8859-9.enc [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/XML/Parser/Encodings/iso-8859-7.enc [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/XML/Parser/Encodings/iso-8859-8.enc [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/XML/Parser/Encodings/x-sjis-jdk117.enc [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/XML/Parser/Encodings/x-sjis-unicode.enc [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/XML/Parser/Encodings/euc-kr.enc [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/XML/Parser/Encodings/iso-8859-5.enc [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/XML/Parser/Encodings/README [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/XML/Parser/Encodings/iso-8859-2.enc [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/XML/Parser/Encodings/iso-8859-3.enc [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/XML/Parser/Encodings/x-euc-jp-unicode.enc [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/XML/Parser/Encodings/Japanese_Encodings.msg [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/XML/Parser/Encodings/iso-8859-4.enc [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/XML/Parser/Encodings/x-sjis-jisx0221.enc [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/XML/Parser/Encodings/x-sjis-cp932.enc [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/XML/Parser/Encodings/x-euc-jp-jisx0221.enc [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/XML/Parser/Encodings/big5.enc [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/XML/Parser/Encodings/windows-1250.enc [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/XML/Parser/Style/Debug.pm [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/XML/Parser/Style/Subs.pm [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/XML/Parser/Style/Tree.pm [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/XML/Parser/Style/Stream.pm [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/XML/Parser/Style/Objects.pm [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/share/man/man3/XML::Parser::Style::Debug.3pm [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/share/man/man3/XML::Parser::Style::Tree.3pm [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/share/man/man3/XML::Parser::Style::Subs.3pm [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/share/man/man3/XML::Parser::Style::Objects.3pm [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/share/man/man3/XML::Parser::Style::Stream.3pm [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/share/man/man3/XML::Parser::Expat.3pm [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/share/man/man3/XML::Parser.3pm [ 44s] + find /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm -type f -name .packlist -exec rm -f '{}' ';' [ 44s] + find /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm -type f -name '*.bs' -a -size 0 -exec rm -f '{}' ';' [ 44s] + find /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm -type d -depth -exec rmdir '{}' ';' [ 44s] + chmod -R u+w /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr [ 44s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/XML-Parser-2.36 [ 44s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/auto/XML/Parser/Expat/Expat.so [ 44s] 228 blocks [ 44s] + /usr/lib/rpm/check-buildroot [ 44s] + /usr/lib/rpm//brp-compress [ 44s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 44s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 44s] + /usr/lib/rpm/brp-python-hardlink [ 44s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm [ 44s] Processing files: perl-XML-Parser-2.36-1.1.armv7l [ 46s] Provides: Expat.so perl(XML::Parser) perl(XML::Parser) = 2.36 perl(XML::Parser::ContentModel) perl(XML::Parser::Encinfo) perl(XML::Parser::Expat) = 2.36 perl(XML::Parser::ExpatNB) perl(XML::Parser::Style::Debug) perl(XML::Parser::Style::Objects) perl(XML::Parser::Style::Stream) perl(XML::Parser::Style::Subs) perl(XML::Parser::Style::Tree) [ 46s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 46s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libexpat.so.1 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) perl >= 0:5.004 perl(Carp) perl(DynaLoader) perl(LWP) perl(URI) perl(URI::file) perl(overload) perl(strict) perl(vars) [ 46s] Processing files: perl-XML-Parser-debuginfo-2.36-1.1.armv7l [ 46s] Processing files: perl-XML-Parser-debugsource-2.36-1.1.armv7l [ 46s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm [ 46s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-XML-Parser-2.36-1.1.src.rpm [ 46s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-XML-Parser-2.36-1.1.armv7l.rpm [ 46s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-XML-Parser-debuginfo-2.36-1.1.armv7l.rpm [ 46s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-XML-Parser-debugsource-2.36-1.1.armv7l.rpm [ 46s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.iHRHkh [ 46s] + umask 022 [ 46s] + cd /home/abuild/rpmbuild/BUILD [ 46s] + cd XML-Parser-2.36 [ 46s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm [ 46s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-XML-Parser-2.36-1.1.arm [ 46s] + exit 0 [ 46s] ... checking for files with abuild user/group [ 46s] ... creating baselibs [ 47s] ... saving built statistics [ 47s] /.build/build: line 3144: mount: command not found [ 47s] ERROR: no root disk device found, yet another new device name? [ 47s] ls: cannot access /sys/block/: No such file or directory [ 47s] /.build/build: line 3159: umount: command not found [ 47s] ... saving built packages [ 47s] /home/abuild/rpmbuild/RPMS/armv7l/perl-XML-Parser-2.36-1.1.armv7l.rpm [ 47s] /home/abuild/rpmbuild/RPMS/armv7l/perl-XML-Parser-debuginfo-2.36-1.1.armv7l.rpm [ 47s] /home/abuild/rpmbuild/RPMS/armv7l/perl-XML-Parser-debugsource-2.36-1.1.armv7l.rpm [ 47s] /home/abuild/rpmbuild/SRPMS/perl-XML-Parser-2.36-1.1.src.rpm [ 47s] /home/abuild/rpmbuild/OTHER/_statistics [ 47s] [ 47s] w05 finished "build perl-XML-Parser.spec" at Tue Feb 3 19:49:05 UTC 2015. [ 47s] [ 50s] [ 45.415377] SysRq : Power Off [ 50s] [ 45.632192] Power down. [ 50s] build: extracting built packages... [ 50s] perl-XML-Parser-2.36-1.1.armv7l.rpm [ 50s] perl-XML-Parser-debuginfo-2.36-1.1.armv7l.rpm [ 50s] perl-XML-Parser-debugsource-2.36-1.1.armv7l.rpm [ 50s] perl-XML-Parser-2.36-1.1.src.rpm [ 50s] _statistics