[ 0s] Using BUILD_ROOT=/srv/build/root_10/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_10/root [ 0s] [ 0s] [ 0s] w12 started "build _service:gbs:python-pycurl.spec" at Mon May 30 22:03:53 UTC 2016. [ 0s] [ 0s] Building python-pycurl for project 'Tizen:2.4:Mobile' repository 'emulator' arch 'i586' srcmd5 '7396efb3e4342ee95f0596d1573d62bf' [ 0s] [ 0s] processing specfile /srv/build/root_10/.build-srcdir/_service:gbs:python-pycurl.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_10/.build-srcdir/_service:gbs:python-pycurl.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/10/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_10/.build.rpmlist /srv/build/root_10/.build-srcdir/_service:gbs:python-pycurl.spec build rpmlint-Factory ... [ 1s] cycle: bash -> glibc -> glibc-common [ 1s] breaking dependency glibc-common -> bash [ 1s] cycle: bash -> glibc -> glibc-common -> coreutils [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: glibc -> glibc-common -> coreutils -> libacl [ 1s] breaking dependency libacl -> glibc [ 1s] cycle: glibc -> glibc-common -> coreutils -> libacl -> libattr [ 1s] breaking dependency glibc-common -> coreutils [ 1s] cycle: glibc -> glibc-common [ 1s] breaking dependency glibc -> glibc-common [ 1s] cycle: glibc -> libgcc [ 1s] breaking dependency libgcc -> glibc [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: rpm -> rpm-libs [ 1s] breaking dependency rpm-libs -> rpm [ 1s] [1/31] preinstalling tizen-release... [ 1s] [2/31] preinstalling libgcc... [ 1s] [3/31] preinstalling setup... [ 1s] [4/31] preinstalling filesystem... [ 1s] [5/31] preinstalling glibc... [ 1s] [6/31] preinstalling bash... [ 1s] [7/31] preinstalling bzip2-libs... [ 1s] [8/31] preinstalling diffutils... [ 1s] [9/31] preinstalling elfutils-libelf... [ 1s] [10/31] preinstalling libattr... [ 1s] [11/31] preinstalling liblua... [ 1s] [12/31] preinstalling ncurses-libs... [ 1s] [13/31] preinstalling nspr... [ 1s] [14/31] preinstalling nss-softokn-freebl... [ 1s] [15/31] preinstalling popt... [ 1s] [16/31] preinstalling readline... [ 1s] [17/31] preinstalling sed... [ 1s] [18/31] preinstalling sqlite... [ 1s] [19/31] preinstalling xz-libs... [ 1s] [20/31] preinstalling zlib... [ 1s] [21/31] preinstalling libstdc++... [ 1s] [22/31] preinstalling glibc-common... [ 1s] [23/31] preinstalling libacl... [ 1s] [24/31] preinstalling libcap... [ 1s] [25/31] preinstalling libfile... [ 1s] [26/31] preinstalling bzip2... [ 1s] [27/31] preinstalling nss... [ 1s] [28/31] preinstalling tar... [ 1s] [29/31] preinstalling coreutils... [ 1s] [30/31] preinstalling rpm-libs... [ 1s] [31/31] preinstalling rpm... [ 1s] [ 1s] cycle: perl -> perl-libs [ 1s] breaking dependency perl-libs -> perl [ 1s] [1/8] preinstalling e2fsprogs-libs... [ 1s] [2/8] preinstalling libpcre... [ 1s] [3/8] preinstalling libuuid... [ 1s] [4/8] preinstalling grep... [ 1s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 2s] copying packages... [ 2s] reordering...cycle: bash -> glibc -> glibc-common [ 2s] breaking dependency glibc-common -> bash [ 2s] cycle: bash -> glibc -> glibc-common -> coreutils [ 2s] breaking dependency glibc-common -> coreutils [ 2s] cycle: glibc -> glibc-common -> findutils [ 2s] breaking dependency glibc-common -> findutils [ 2s] cycle: glibc -> glibc-common [ 2s] breaking dependency glibc-common -> glibc [ 2s] cycle: glibc -> glibc-common -> grep [ 2s] breaking dependency grep -> glibc [ 2s] cycle: glibc -> glibc-common -> grep -> libpcre [ 2s] breaking dependency libpcre -> glibc [ 2s] cycle: glibc -> glibc-common -> grep -> libpcre -> libgcc [ 2s] breaking dependency libpcre -> libgcc [ 2s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++ [ 2s] breaking dependency libstdc++ -> glibc [ 2s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 2s] breaking dependency glibc -> glibc-common [ 2s] cycle: glibc -> libgcc [ 2s] breaking dependency libgcc -> glibc [ 2s] cycle: filesystem -> setup [ 2s] breaking dependency setup -> filesystem [ 2s] cycle: gio-branding-upstream -> libgio [ 2s] breaking dependency libgio -> gio-branding-upstream [ 2s] cycle: ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses [ 2s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses-base [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl -> perl-libs [ 2s] cycle: perl -> perl-IO-Compress-Zlib [ 2s] breaking dependency perl -> perl-IO-Compress-Zlib [ 2s] cycle: perl-IO-Compress-Base -> perl [ 2s] breaking dependency perl -> perl-IO-Compress-Base [ 2s] cycle: perl -> perl-Module-Pluggable [ 2s] breaking dependency perl -> perl-Module-Pluggable [ 2s] cycle: perl -> perl-Pod-Simple [ 2s] breaking dependency perl -> perl-Pod-Simple [ 2s] cycle: dbus-libs -> dbus [ 2s] breaking dependency dbus -> dbus-libs [ 2s] cycle: nss-sysinit -> nss [ 2s] breaking dependency nss -> nss-sysinit [ 2s] cycle: rpm -> rpm-libs [ 2s] breaking dependency rpm-libs -> rpm [ 2s] done [ 2s] booting kvm ... [ 2s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 10000 -drive file=/srv/build/root_10/root,if=virtio,cache=none -drive file=/srv/build/root_10/root,if=ide,index=0,cache=none -drive file=/srv/build/root_10/swap,if=virtio,cache=none -smp 4 [ 4s] doing fast boot [ 4s] Creating device nodes with udev [ 4s] Waiting for device /dev/vda to appear: ok [ 4s] fsck from util-linux 2.21.2 [ 4s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 4s] /dev/vda: clean, 4129/2392064 files, 196200/9568256 blocks [ 4s] fsck succeeded. Mounting root device read-write. [ 4s] Mounting root /dev/vda [ 4s] mount -o rw -t ext4 /dev/vda /root [ 4s] replacing /etc/mtab with symlink to /proc/self/mounts [ 4s] 2nd stage started in virtual machine [ 4s] machine type: x86_64 [ 4s] switching personality to 8... [ 4s] 2nd stage started in virtual machine [ 4s] machine type: i686 [ 4s] swapon on /dev/vdb [ 4s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 4s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 4s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 4s] logging output to //.build.log... [ 4s] processing specfile /.build-srcdir/_service:gbs:python-pycurl.spec ... [ 4s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:python-pycurl.spec build rpmlint-Factory ... [ 4s] initializing rpm db... [ 5s] [1/140] cumulate kernel-headers-3.4.91-1.1 [ 5s] [2/140] cumulate libX11-common-1.6.2-1.1 [ 5s] [3/140] cumulate tizen-release-2.2.0-1.1 [ 5s] [4/140] cumulate tzdata-2014j-1.1 [ 5s] [5/140] cumulate libgcc-4.9.2-2015.02.1.11 [ 5s] [6/140] cumulate setup-0.2-1.1 [ 5s] [7/140] cumulate filesystem-0.1-1.1 [ 5s] [8/140] cumulate glibc-2.20-2014.11.1.9 [ 5s] [9/140] cumulate libstdc++-4.9.2-2015.02.1.11 [ 5s] [10/140] cumulate bash-4.1-1.3 [ 5s] [11/140] cumulate bzip2-libs-1.0.5-1.6 [ 5s] [12/140] cumulate c-ares-1.10.0_5-1.1 [ 5s] [13/140] cumulate capi-base-common-0.2.2-1.1 [ 5s] [14/140] cumulate check-0.9.8-1.1 [ 5s] [15/140] cumulate cpio-2.8-1.3 [ 5s] [16/140] cumulate db4-4.8.30-1.7 [ 5s] [17/140] cumulate diffutils-3.0-1.3 [ 5s] [18/140] cumulate e2fsprogs-libs-1.41.9-1.2 [ 5s] [19/140] cumulate elfutils-libelf-0.152-1.12 [ 5s] [20/140] cumulate expat-2.0.1-1.6 [ 5s] [21/140] cumulate fdupes-1.40-1.3 [ 5s] [22/140] cumulate findutils-4.2.31-1.3 [ 5s] [23/140] cumulate gdbm-1.8.3-1.11 [ 5s] [24/140] cumulate libXau-1.0.8-1.1 [ 5s] [25/140] cumulate libatomic-4.9.2-2015.02.1.11 [ 5s] [26/140] cumulate libattr-2.4.44-1.7 [ 5s] [27/140] cumulate libffi-3.1-1.1 [ 5s] [28/140] cumulate libglib-2.44.1-2.1 [ 5s] [29/140] cumulate libgomp-4.9.2-2015.02.1.11 [ 5s] [30/140] cumulate libidn-1.15-1.3 [ 5s] [31/140] cumulate libitm-4.9.2-2015.02.1.11 [ 5s] [32/140] cumulate liblua-5.1.4-1.6 [ 5s] [33/140] cumulate libuuid-2.20.2-1.2 [ 5s] [34/140] cumulate m4-1.4.14-1.3 [ 5s] [35/140] cumulate net-tools-1.60-2.3 [ 5s] [36/140] cumulate nghttp2-0.7.3-1.1 [ 5s] [37/140] cumulate nspr-4.9-1.9 [ 5s] [38/140] cumulate nss-softokn-freebl-3.12.9-1.17 [ 5s] [39/140] cumulate openssl-1.0.1p-1.4 [ 5s] [40/140] cumulate patch-2.6-1.3 [ 5s] [41/140] cumulate pkg-config-0.25-2.3 [ 5s] [42/140] cumulate popt-1.16-1.7 [ 5s] [43/140] cumulate readline-5.2-1.6 [ 5s] [44/140] cumulate sed-4.1.5-1.3 [ 5s] [45/140] cumulate smack-1.0+s14-1.6 [ 5s] [46/140] cumulate sqlite-3.8.10.2-1.6 [ 5s] [47/140] cumulate xz-libs-5.0.3-1.6 [ 5s] [48/140] cumulate zlib-1.2.8-1.6 [ 5s] [49/140] cumulate libvtv-4.9.2-2015.02.1.11 [ 5s] [50/140] cumulate libasan-4.9.2-2015.02.1.11 [ 5s] [51/140] cumulate libpcre-7.7-1.18 [ 5s] [52/140] cumulate libubsan-4.9.2-2015.02.1.11 [ 5s] [53/140] cumulate ncurses-libs-5.7-1.7 [ 5s] [54/140] cumulate patchelf-0.5.svn20809-1.3 [ 5s] [55/140] cumulate build-compare-2009.10.14-1.3 [ 5s] [56/140] cumulate c-ares-devel-1.10.0_5-1.1 [ 5s] [57/140] cumulate capi-base-common-devel-0.2.2-1.1 [ 5s] [58/140] cumulate cpp-4.9.2-2015.02.1.11 [ 5s] [59/140] cumulate glibc-headers-2.20-2014.11.1.9 [ 5s] [60/140] cumulate grep-2.5.1a-1.3 [ 5s] [61/140] cumulate libacl-2.2.49-1.3 [ 5s] [62/140] cumulate libcap-2.21-1.6 [ 5s] [63/140] cumulate libfile-5.04-1.4 [ 5s] [64/140] cumulate libgmodule-2.44.1-2.1 [ 5s] [65/140] cumulate libgthread-2.44.1-2.1 [ 5s] [66/140] cumulate libpython-2.7.1-1.6 [ 5s] [67/140] cumulate libxcb-1.10.0-1.1 [ 5s] [68/140] cumulate libxml2-2.9.2-1.4 [ 5s] [69/140] cumulate make-3.82-154.1.3 [ 5s] [70/140] cumulate ncurses-5.7-1.7 [ 5s] [71/140] cumulate openssl-devel-1.0.1p-1.4 [ 5s] [72/140] cumulate pcre-7.7-1.18 [ 5s] [73/140] cumulate psmisc-22.20-1.6 [ 5s] [74/140] cumulate unzip-6.0-1.10 [ 5s] [75/140] cumulate zlib-devel-1.2.8-1.6 [ 5s] [76/140] cumulate binutils-2.25.0-2015.01.1.7 [ 5s] [77/140] cumulate bzip2-1.0.5-1.6 [ 5s] [78/140] cumulate libblkid-2.20.2-1.2 [ 5s] [79/140] cumulate libgobject-2.44.1-2.1 [ 5s] [80/140] cumulate smack-utils-1.0+s14-1.6 [ 5s] [81/140] cumulate spindly-0.0.10-1.1 [ 5s] [82/140] cumulate xz-5.0.3-1.6 [ 5s] [83/140] cumulate elfutils-libs-0.152-1.12 [ 5s] [84/140] cumulate libcurl-7.40.1_6-1.1 [ 5s] [85/140] cumulate nss-3.12.9-1.17 [ 5s] [86/140] cumulate perl-5.12.1-1.16 [ 5s] [87/140] cumulate ncurses-base-5.7-1.7 [ 6s] [88/140] cumulate perl-IO-Compress-Base-2.008-1.16 [ 6s] [89/140] cumulate perl-Module-Pluggable-3.60-1.16 [ 6s] [90/140] cumulate perl-Pod-Escapes-1.04-1.16 [ 6s] [91/140] cumulate perl-TimeDate-1.20-1.1 [ 6s] [92/140] cumulate file-5.04-1.4 [ 6s] [93/140] cumulate glibc-devel-2.20-2014.11.1.9 [ 6s] [94/140] cumulate perl-Compress-Raw-Zlib-2.008-1.16 [ 6s] [95/140] cumulate perl-libs-5.12.1-1.16 [ 6s] [96/140] cumulate tar-1.17-1.3 [ 6s] [97/140] cumulate coreutils-6.9-1.3 [ 6s] [98/140] cumulate libX11-1.6.2-1.1 [ 6s] [99/140] cumulate libdlog-0.4.1-1.1 [ 6s] [100/140] cumulate libmount-2.20.2-1.2 [ 6s] [101/140] cumulate xz-lzma-compat-5.0.3-1.6 [ 6s] [102/140] cumulate nss-sysinit-3.12.9-1.17 [ 6s] [103/140] cumulate python-base-2.7.1-1.6 [ 6s] [104/140] cumulate elfutils-0.152-1.12 [ 6s] [105/140] cumulate glibc-common-2.20-2014.11.1.9 [ 6s] [106/140] cumulate libgio-2.44.1-2.1 [ 6s] [107/140] cumulate libarchive-2.8.3-1.2 [ 6s] [108/140] cumulate rpm-libs-4.9.1-4.3.1.7 [ 6s] [109/140] cumulate gio-branding-upstream-2.44.1-2.1 [ 6s] [110/140] cumulate libstdc++-devel-4.9.2-2015.02.1.11 [ 6s] [111/140] cumulate perl-Pod-Simple-3.07-1.16 [ 6s] [112/140] cumulate check-devel-0.9.8-1.1 [ 6s] [113/140] cumulate gawk-3.1.5-1.5 [ 6s] [114/140] cumulate gzip-1.3.12-1.3 [ 6s] [115/140] cumulate libdlog-devel-0.4.1-1.1 [ 6s] [116/140] cumulate libidn-devel-1.15-1.3 [ 6s] [117/140] cumulate perl-IO-Compress-Zlib-2.008-1.16 [ 6s] [118/140] cumulate python-xml-2.7.1-1.6 [ 6s] [119/140] cumulate rpm-4.9.1-4.3.1.7 [ 6s] [120/140] cumulate autoconf-2.68-1.1 [ 6s] [121/140] cumulate build-2011.01.10a-1.1 [ 6s] [122/140] cumulate python-devel-2.7.1-1.6 [ 6s] [123/140] cumulate dbus-1.8.16-2.1 [ 6s] [124/140] cumulate glib2-tools-2.44.1-2.1 [ 6s] [125/140] cumulate util-linux-2.20.2-1.2 [ 6s] [126/140] cumulate cmake-2.8.5-1.1.2 [ 6s] [127/140] cumulate python-2.7.1-1.2 [ 6s] [128/140] cumulate gcc-4.9.2-2015.02.1.11 [ 6s] [129/140] cumulate dbus-libs-1.8.16-2.1 [ 6s] [130/140] cumulate automake-1.11.1-1.1 [ 6s] [131/140] cumulate gcc-c++-4.9.2-2015.02.1.11 [ 6s] [132/140] cumulate libcurl-devel-7.40.1_6-1.1 [ 6s] [133/140] cumulate spindly-devel-0.0.10-1.1 [ 6s] [134/140] cumulate glib2-devel-2.44.1-2.1 [ 6s] [135/140] cumulate rpm-build-4.9.1-4.3.1.7 [ 6s] [136/140] cumulate dbus-devel-1.8.16-2.1 [ 6s] [137/140] cumulate libtool-2.2.6b-1.7 [ 6s] [138/140] cumulate dbus-glib-0.100-1.1 [ 6s] [139/140] cumulate dbus-glib-devel-0.100-1.1 [ 6s] [140/140] now installing cumulated packages [ 6s] Preparing... ################################################## [ 6s] setup ################################################## [ 6s] filesystem ################################################## [ 6s] tzdata ################################################## [ 7s] libX11-common ################################################## [ 7s] tizen-release ################################################## [ 7s] kernel-headers ################################################## [ 7s] bash ################################################## [ 7s] findutils ################################################## [ 7s] grep ################################################## [ 7s] coreutils ################################################## [ 7s] glibc-common ################################################## [ 7s] libgcc ################################################## [ 7s] /sbin/ldconfig: relative path `1' used to build cache [ 7s] warning: %post(libgcc-4.9.2-2015.02.1.11.i586) scriptlet failed, exit status 1 [ 7s] glibc ################################################## [ 7s] libstdc++ ################################################## [ 7s] libattr ################################################## [ 7s] libacl ################################################## [ 7s] libpcre ################################################## [ 7s] glibc-headers ################################################## [ 7s] glibc-devel ################################################## [ 7s] libstdc++-devel ################################################## [ 7s] build-compare ################################################## [ 7s] zlib ################################################## [ 7s] pkg-config ################################################## [ 7s] libglib ################################################## [ 7s] bzip2-libs ################################################## [ 7s] elfutils-libelf ################################################## [ 7s] openssl ################################################## [ 7s] xz-libs ################################################## [ 7s] ncurses-libs ################################################## [ 7s] ncurses ################################################## [ 7s] ncurses-base ################################################## [ 7s] libpython ################################################## [ 7s] python-base ################################################## [ 7s] libgmodule ################################################## [ 8s] binutils ################################################## [ 8s] expat ################################################## [ 8s] libuuid ################################################## [ 8s] popt ################################################## [ 8s] libblkid ################################################## [ 8s] xz ################################################## [ 8s] libfile ################################################## [ 8s] c-ares ################################################## [ 8s] libidn ################################################## [ 8s] nspr ################################################## [ 8s] sed ################################################## [ 8s] smack ################################################## [ 8s] sqlite ################################################## [ 8s] libidn-devel ################################################## [ 8s] zlib-devel ################################################## [ 8s] smack-utils ################################################## [ 8s] libdlog ################################################## [ 8s] file ################################################## [ 8s] xz-lzma-compat ################################################## [ 8s] libmount ################################################## [ 8s] python-xml ################################################## [ 8s] elfutils-libs ################################################## [ 8s] elfutils ################################################## [ 8s] bzip2 ################################################## [ 8s] libgthread ################################################## [ 8s] cpp ################################################## [ 8s] libxml2 ################################################## [ 8s] libarchive ################################################## [ 8s] spindly ################################################## [ 8s] tar ################################################## [ 8s] libcap ################################################## [ 8s] libasan ################################################## [ 8s] libubsan ################################################## [ 8s] capi-base-common ################################################## [ 8s] capi-base-common-devel ################################################## [ 8s] check ################################################## [ 8s] check-devel ################################################## [ 8s] cpio ################################################## [ 8s] db4 ################################################## [ 8s] diffutils ################################################## [ 8s] gdbm ################################################## [ 8s] perl-Pod-Escapes ################################################## [ 8s] perl-Compress-Raw-Zlib ################################################## [ 8s] perl-IO-Compress-Base ################################################## [ 8s] perl-Module-Pluggable ################################################## [ 8s] perl-Pod-Simple ################################################## [ 8s] perl-IO-Compress-Zlib ################################################## [ 8s] perl-libs ################################################## [ 9s] perl ################################################## [ 9s] perl-TimeDate ################################################## [ 9s] libXau ################################################## [ 9s] libxcb ################################################## [ 9s] libX11 ################################################## [ 9s] dbus-libs ################################################## [ 9s] dbus ################################################## [ 9s] dbus-devel ################################################## [ 9s] libatomic ################################################## [ 9s] libffi ################################################## [ 9s] libgobject ################################################## [ 9s] gio-branding-upstream ################################################## [ 9s] libgio ################################################## [ 9s] glib2-tools ################################################## [ 9s] glib2-devel ################################################## [ 9s] dbus-glib ################################################## [ 9s] libgomp ################################################## [ 9s] libitm ################################################## [ 9s] liblua ################################################## [ 9s] m4 ################################################## [ 9s] autoconf ################################################## [ 9s] automake ################################################## [ 9s] nghttp2 ################################################## [ 9s] libcurl ################################################## [ 9s] nss-softokn-freebl ################################################## [ 9s] nss ################################################## [ 9s] nss-sysinit ################################################## [ 9s] rpm-libs ################################################## [ 9s] rpm ################################################## [ 9s] patch ################################################## [ 9s] readline ################################################## [ 9s] libvtv ################################################## [ 10s] gcc ################################################## [ 10s] unzip ################################################## [ 10s] gawk ################################################## [ 10s] gzip ################################################## [ 10s] libcurl-devel ################################################## [ 10s] libtool ################################################## [ 10s] build ################################################## [ 10s] spindly-devel ################################################## [ 10s] libdlog-devel ################################################## [ 10s] c-ares-devel ################################################## [ 10s] python-devel ################################################## [ 10s] openssl-devel ################################################## [ 10s] rpm-build ################################################## [ 10s] gcc-c++ ################################################## [ 10s] python ################################################## [ 10s] dbus-glib-devel ################################################## [ 10s] cmake ################################################## [ 10s] util-linux ################################################## [ 10s] psmisc ################################################## [ 10s] pcre ################################################## [ 10s] patchelf ################################################## [ 10s] e2fsprogs-libs ################################################## [ 10s] fdupes ################################################## [ 10s] net-tools ################################################## [ 11s] make ################################################## [ 11s] removing nis flags from //etc/nsswitch.conf... [ 11s] now finalizing build dir... [ 11s] Warning: spec file parser line 16: can't expand %(...) [ 11s] Warning: spec file parser line 36: can't expand %(...) [ 11s] Warning: spec file parser line 70: can't expand %(...) [ 11s] Warning: spec file parser line 71: can't expand %(...) [ 11s] ----------------------------------------------------------------- [ 11s] I have the following modifications for python-pycurl.spec: [ 11s] 6c6 [ 11s] < Release: 4 [ 11s] --- [ 11s] > Release: %{?release_prefix:%{release_prefix}.}1.3 [ 11s] 71a72 [ 11s] > %changelog [ 11s] ----------------------------------------------------------------- [ 11s] ----- building python-pycurl.spec (user abuild) [ 11s] ----------------------------------------------------------------- [ 11s] ----------------------------------------------------------------- [ 11s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:2.4:Mobile/emulator/7396efb3e4342ee95f0596d1573d62bf-python-pycurl' /home/abuild/rpmbuild/SOURCES/python-pycurl.spec [ 11s] sh: @__ID_U@: command not found [ 11s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.KheVBW [ 11s] + umask 022 [ 11s] + cd /home/abuild/rpmbuild/BUILD [ 11s] + cd /home/abuild/rpmbuild/BUILD [ 11s] + rm -rf pycurl-7.19.0 [ 11s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/pycurl-7.19.0.tar.gz [ 11s] + /bin/tar -xf - [ 11s] + STATUS=0 [ 11s] + '[' 0 -ne 0 ']' [ 11s] + cd pycurl-7.19.0 [ 11s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 11s] + echo 'Patch #0 (python-pycurl-no-static-libs.patch):' [ 11s] Patch #0 (python-pycurl-no-static-libs.patch): [ 11s] + /usr/bin/patch -s -p0 --fuzz=2 [ 11s] + /bin/cat /home/abuild/rpmbuild/SOURCES/python-pycurl-no-static-libs.patch [ 11s] + echo 'Patch #1 (python-pycurl-lcrypto.patch):' [ 11s] Patch #1 (python-pycurl-lcrypto.patch): [ 11s] + /bin/cat /home/abuild/rpmbuild/SOURCES/python-pycurl-lcrypto.patch [ 11s] + /usr/bin/patch -s -p1 -b --suffix .lcrypto --fuzz=2 [ 11s] + chmod a-x examples/basicfirst.py examples/file_upload.py examples/linksys.py examples/retriever-multi.py examples/retriever.py examples/sfquery.py examples/xmlrpc_curl.py [ 11s] + exit 0 [ 11s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.bVQY1h [ 11s] + umask 022 [ 11s] + cd /home/abuild/rpmbuild/BUILD [ 11s] + cd pycurl-7.19.0 [ 11s] + LANG=C [ 11s] + export LANG [ 11s] + unset DISPLAY [ 11s] + CFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -fdiagnostics-color=never -Wl,--as-needed -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 11s] + export CFLAGS [ 11s] + CXXFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -fdiagnostics-color=never -Wl,--as-needed -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 11s] + export CXXFLAGS [ 11s] + FFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -fdiagnostics-color=never -Wl,--as-needed -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I%_fmoddir' [ 11s] + export FFLAGS [ 11s] + LD_AS_NEEDED=1 [ 11s] + export LD_AS_NEEDED [ 11s] + CFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -fdiagnostics-color=never -Wl,--as-needed -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -DHAVE_CURL_OPENSSL' [ 11s] + /usr/bin/python setup.py build [ 11s] Using curl-config (libcurl 7.40.1-DEV) [ 11s] running build [ 11s] running build_py [ 11s] creating build [ 11s] creating build/lib.linux-i686-2.7 [ 11s] creating build/lib.linux-i686-2.7/curl [ 11s] copying python/curl/__init__.py -> build/lib.linux-i686-2.7/curl [ 11s] running build_ext [ 11s] building 'pycurl' extension [ 11s] creating build/temp.linux-i686-2.7 [ 11s] creating build/temp.linux-i686-2.7/src [ 11s] gcc -pthread -DNDEBUG -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -fdiagnostics-color=never -Wl,--as-needed -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -fdiagnostics-color=never -Wl,--as-needed -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -DHAVE_CURL_OPENSSL -fPIC -DHAVE_CURL_OPENSSL=1 -DHAVE_CURL_OPENSSL=1 -DHAVE_CURL_SSL=1 -I/usr/include/python2.7 -c src/pycurl.c -o build/temp.linux-i686-2.7/src/pycurl.o [ 11s] src/pycurl.c: In function 'multi_socket_callback': [ 11s] src/pycurl.c:2351:9: warning: variable 'ret' set but not used [-Wunused-but-set-variable] [ 11s] int ret; [ 11s] ^ [ 12s] gcc -pthread -shared -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -fdiagnostics-color=never -Wl,--as-needed -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -DHAVE_CURL_OPENSSL build/temp.linux-i686-2.7/src/pycurl.o -L/usr/lib -lcurl -lcares -lnghttp2 -lidn -lssl -lcrypto -lssl -lcrypto -lz -lcrypto -lpython2.7 -o build/lib.linux-i686-2.7/pycurl.so [ 12s] + exit 0 [ 12s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.mgsi3G [ 12s] + umask 022 [ 12s] + cd /home/abuild/rpmbuild/BUILD [ 12s] + cd pycurl-7.19.0 [ 12s] + LANG=C [ 12s] + export LANG [ 12s] + unset DISPLAY [ 12s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386 [ 12s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386 [ 12s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386 [ 12s] + /usr/bin/python setup.py install -O1 --skip-build --root /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386 --prefix /usr [ 13s] Using curl-config (libcurl 7.40.1-DEV) [ 13s] running install [ 13s] running install_lib [ 13s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386 [ 13s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr [ 13s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/lib [ 13s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/lib/python2.7 [ 13s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/lib/python2.7/site-packages [ 13s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/lib/python2.7/site-packages/curl [ 13s] copying build/lib.linux-i686-2.7/curl/__init__.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/lib/python2.7/site-packages/curl [ 13s] copying build/lib.linux-i686-2.7/pycurl.so -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/lib/python2.7/site-packages [ 13s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/lib/python2.7/site-packages/curl/__init__.py to __init__.pyc [ 13s] writing byte-compilation script '/tmp/tmpvxBUNb.py' [ 13s] /usr/bin/python -O /tmp/tmpvxBUNb.py [ 13s] removing /tmp/tmpvxBUNb.py [ 13s] running install_data [ 13s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share [ 13s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc [ 13s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl [ 13s] copying ChangeLog -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl [ 13s] copying COPYING -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl [ 13s] copying COPYING2 -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl [ 13s] copying INSTALL -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl [ 13s] copying README -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl [ 13s] copying TODO -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl [ 13s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/html [ 13s] copying doc/curlshareobject.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/html [ 13s] copying doc/curlmultiobject.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/html [ 13s] copying doc/curlobject.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/html [ 13s] copying doc/callbacks.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/html [ 13s] copying doc/pycurl.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/html [ 13s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/examples [ 13s] copying examples/file_upload.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/examples [ 13s] copying examples/xmlrpc_curl.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/examples [ 13s] copying examples/retriever-multi.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/examples [ 13s] copying examples/linksys.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/examples [ 13s] copying examples/retriever.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/examples [ 13s] copying examples/basicfirst.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/examples [ 13s] copying examples/sfquery.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/examples [ 13s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/tests [ 13s] copying tests/test_stringio.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/tests [ 13s] copying tests/test_multi3.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/tests [ 13s] copying tests/test_multi_timer.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/tests [ 13s] copying tests/test_share.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/tests [ 13s] copying tests/test_cb.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/tests [ 13s] copying tests/test.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/tests [ 13s] copying tests/test_multi5.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/tests [ 13s] copying tests/test_post.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/tests [ 13s] copying tests/test_gtk.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/tests [ 13s] copying tests/test_ftp.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/tests [ 13s] copying tests/test_getinfo.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/tests [ 13s] copying tests/test_post2.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/tests [ 13s] copying tests/test_socketopen.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/tests [ 13s] copying tests/test_multi2.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/tests [ 13s] copying tests/util.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/tests [ 13s] copying tests/test_multi_vs_thread.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/tests [ 13s] copying tests/test_multi.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/tests [ 13s] copying tests/test_multi_socket_select.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/tests [ 13s] copying tests/test_xmlrpc.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/tests [ 13s] copying tests/test_multi_socket.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/tests [ 13s] copying tests/test_multi6.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/tests [ 13s] copying tests/test_memleak.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/tests [ 13s] copying tests/test_multi4.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/tests [ 13s] copying tests/test_post3.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/tests [ 13s] copying tests/test_internals.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/tests [ 13s] copying tests/test_debug.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/share/doc/pycurl/tests [ 13s] running install_egg_info [ 13s] Writing /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/lib/python2.7/site-packages/pycurl-7.19.0-py2.7.egg-info [ 13s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/pycurl-7.19.0 [ 13s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386/usr/lib/python2.7/site-packages/pycurl.so [ 13s] 246 blocks [ 13s] + /usr/lib/rpm/check-buildroot [ 13s] + /usr/lib/rpm//brp-compress [ 13s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 13s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 13s] + /usr/lib/rpm/brp-python-hardlink [ 13s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386 [ 13s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.Et1oY6 [ 13s] + umask 022 [ 13s] + cd /home/abuild/rpmbuild/BUILD [ 13s] + cd pycurl-7.19.0 [ 13s] + exit 0 [ 13s] Processing files: python-pycurl-7.19.0-1.3.i586 [ 13s] Provides: pycurl = 7.19.0-1.3 pycurl.so [ 13s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 13s] Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.15) libcrypto.so.1.0.0 libcurl.so.4 libcurl.so.4(CURL_OPENSSL_4) libpthread.so.0 libpython2.7.so.1.0 python(abi) = 2.7 [ 13s] Processing files: python-pycurl-debuginfo-7.19.0-1.3.i586 [ 13s] Processing files: python-pycurl-debugsource-7.19.0-1.3.i586 [ 13s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386 [ 13s] Wrote: /home/abuild/rpmbuild/SRPMS/python-pycurl-7.19.0-1.3.src.rpm [ 13s] Wrote: /home/abuild/rpmbuild/RPMS/i586/python-pycurl-7.19.0-1.3.i586.rpm [ 13s] Wrote: /home/abuild/rpmbuild/RPMS/i586/python-pycurl-debuginfo-7.19.0-1.3.i586.rpm [ 13s] Wrote: /home/abuild/rpmbuild/RPMS/i586/python-pycurl-debugsource-7.19.0-1.3.i586.rpm [ 13s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.W7UbFd [ 13s] + umask 022 [ 13s] + cd /home/abuild/rpmbuild/BUILD [ 13s] + cd pycurl-7.19.0 [ 13s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386 [ 13s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.3.i386 [ 13s] + exit 0 [ 13s] ... checking for files with abuild user/group [ 13s] ... creating baselibs [ 13s] ... comparing built packages with the former built [ 13s] /usr/lib/build/rpm-check.sh [ 13s] compare /.build.oldpackages/python-pycurl-7.19.0-1.2.src.rpm /home/abuild/rpmbuild/SRPMS/python-pycurl-7.19.0-1.3.src.rpm [ 13s] compare /.build.oldpackages/python-pycurl-7.19.0-1.2.i586.rpm /home/abuild/rpmbuild/RPMS/i586/python-pycurl-7.19.0-1.3.i586.rpm [ 13s] /usr/lib/python2.7/site-packages/pycurl.so differs in ELF sections [ 13s] --- /tmp/tmp.56hbP4rutH 2016-05-30 22:04:06.860735844 +0000 [ 13s] +++ /tmp/tmp.MvRzJhOnAl 2016-05-30 22:04:06.876735844 +0000 [ 13s] @@ -3,8 +3,8 @@ [ 13s] [ 13s] Contents of section .note.gnu.build-id: [ 13s] 00f4 04000000 14000000 03000000 474e5500 ............GNU. [ 13s] - 0104 6e8233b9 9a6dfba1 8f58ab38 f194aaaf n.3..m...X.8.... [ 13s] - 0114 5411b03c T..< [ 13s] + 0104 2f601340 bbabd9c0 df29d1d1 331e2d27 /`.@.....)..3.-' [ 13s] + 0114 53fb6c20 S.l [ 13s] Contents of section .hash: [ 13s] 0118 61000000 7e000000 64000000 55000000 a...~...d...U... [ 13s] 0128 2a000000 6d000000 00000000 00000000 *...m........... [ 13s] @@ -2709,8 +2709,8 @@ [ 13s] a8e8 30290070 79637572 6c2e6572 726f7200 0).pycurl.error. [ 13s] a8f8 4572726f 724f626a 65637420 213d2028 ErrorObject != ( [ 13s] a908 28766f69 64202a29 30290076 65727369 (void *)0).versi [ 13s] - a918 6f6e004d 61722020 37203230 31362030 on.Mar 7 2016 0 [ 13s] - a928 323a3033 3a323700 434f4d50 494c455f 2:03:27.COMPILE_ [ 13s] + a918 6f6e004d 61792033 30203230 31362032 on.May 30 2016 2 [ 13s] + a928 323a3034 3a303400 434f4d50 494c455f 2:04:04.COMPILE_ [ 13s] a938 44415445 00434f4d 50494c45 5f50595f DATE.COMPILE_PY_ [ 13s] a948 56455253 494f4e5f 48455800 434f4d50 VERSION_HEX.COMP [ 13s] a958 494c455f 4c494243 55524c5f 56455253 ILE_LIBCURL_VERS [ 13s] @@ -3904,4 +3904,4 @@ [ 13s] 102d0 00000000 00000000 00000000 00000000 ................ [ 13s] Contents of section .gnu_debuglink: [ 13s] 0000 70796375 726c2e73 6f2e6465 62756700 pycurl.so.debug. [ 13s] - 0010 684e2f13 hN/. [ 13s] + 0010 1a21da78 .!.x [ 13s] compare /.build.oldpackages/python-pycurl-debuginfo-7.19.0-1.2.i586.rpm /home/abuild/rpmbuild/RPMS/i586/python-pycurl-debuginfo-7.19.0-1.3.i586.rpm [ 14s] --- /tmp/tmp.mSFYOWByy1 2016-05-30 22:04:06.996735849 +0000 [ 14s] +++ /tmp/tmp.kyWca5p9At 2016-05-30 22:04:07.008735850 +0000 [ 14s] @@ -1,8 +1,8 @@ [ 14s] /usr/lib/debug 0 (none) 40755 root root 0 4294967295 [ 14s] /usr/lib/debug/.build-id 0 (none) 40755 root root 0 4294967295 [ 14s] -/usr/lib/debug/.build-id/6e 0 (none) 40755 root root 0 4294967295 [ 14s] -/usr/lib/debug/.build-id/6e/8233b99a6dfba18f58ab38f194aaaf5411b03c 0 (none) 120777 root root 0 4294967295 ../../../python2.7/site-packages/pycurl.so [ 14s] -/usr/lib/debug/.build-id/6e/8233b99a6dfba18f58ab38f194aaaf5411b03c.debug 0 (none) 120777 root root 0 4294967295 ../../usr/lib/python2.7/site-packages/pycurl.so.debug [ 14s] +/usr/lib/debug/.build-id/2f 0 (none) 40755 root root 0 4294967295 [ 14s] +/usr/lib/debug/.build-id/2f/601340bbabd9c0df29d1d1331e2d2753fb6c20 0 (none) 120777 root root 0 4294967295 ../../../python2.7/site-packages/pycurl.so [ 14s] +/usr/lib/debug/.build-id/2f/601340bbabd9c0df29d1d1331e2d2753fb6c20.debug 0 (none) 120777 root root 0 4294967295 ../../usr/lib/python2.7/site-packages/pycurl.so.debug [ 14s] /usr/lib/debug/usr 0 (none) 40755 root root 0 4294967295 [ 14s] /usr/lib/debug/usr/lib 0 (none) 40755 root root 0 4294967295 [ 14s] /usr/lib/debug/usr/lib/python2.7 0 (none) 40755 root root 0 4294967295 [ 14s] RPM meta information is different [ 14s] compare /.build.oldpackages/python-pycurl-debugsource-7.19.0-1.2.i586.rpm /home/abuild/rpmbuild/RPMS/i586/python-pycurl-debugsource-7.19.0-1.3.i586.rpm [ 14s] ... saving built statistics [ 14s] ... saving built packages [ 14s] /home/abuild/rpmbuild/RPMS/i586/python-pycurl-7.19.0-1.3.i586.rpm [ 14s] /home/abuild/rpmbuild/RPMS/i586/python-pycurl-debuginfo-7.19.0-1.3.i586.rpm [ 14s] /home/abuild/rpmbuild/RPMS/i586/python-pycurl-debugsource-7.19.0-1.3.i586.rpm [ 14s] /home/abuild/rpmbuild/SRPMS/python-pycurl-7.19.0-1.3.src.rpm [ 14s] /home/abuild/rpmbuild/OTHER/_statistics [ 14s] [ 14s] w12 finished "build python-pycurl.spec" at Mon May 30 22:04:07 UTC 2016. [ 14s] [ 17s] [ 13.264411] SysRq : Power Off [ 17s] [ 13.372152] Power down. [ 17s] build: extracting built packages... [ 17s] python-pycurl-7.19.0-1.3.i586.rpm [ 17s] python-pycurl-debuginfo-7.19.0-1.3.i586.rpm [ 17s] python-pycurl-debugsource-7.19.0-1.3.i586.rpm [ 17s] python-pycurl-7.19.0-1.3.src.rpm [ 17s] _statistics