[ 0s] Using BUILD_ROOT=/srv/build/root_2/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_2/root [ 0s] [ 0s] [ 0s] w18 started "build _service:gbs:atk.spec" at Thu Oct 29 04:54:11 UTC 2015. [ 0s] [ 0s] Building atk for project 'Tizen:2.4:Mobile' repository 'target-TM1' arch 'armv7l' srcmd5 '04b49dce4942b1e344a2acd153080b18' [ 0s] [ 0s] processing specfile /srv/build/root_2/.build-srcdir/_service:gbs:atk.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_2/.build-srcdir/_service:gbs:atk.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_2/.build.rpmlist /srv/build/root_2/.build-srcdir/_service:gbs:atk.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 0s] [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: glibc -> glibc-common -> bash [ 1s] breaking dependency glibc-common -> bash [ 1s] cycle: glibc -> glibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: glibc -> glibc-common -> coreutils [ 1s] breaking dependency coreutils -> glibc [ 1s] cycle: glibc -> glibc-common -> coreutils -> libacl [ 1s] breaking dependency libacl -> glibc [ 1s] cycle: glibc -> glibc-common -> coreutils -> libacl -> libattr [ 1s] breaking dependency libattr -> glibc [ 1s] cycle: libgcc -> glibc -> glibc-common -> coreutils -> libacl -> libattr [ 1s] breaking dependency libacl -> libattr [ 1s] cycle: libgcc -> glibc -> glibc-common -> coreutils -> libacl [ 1s] breaking dependency glibc-common -> coreutils [ 1s] cycle: glibc -> glibc-common [ 1s] breaking dependency glibc -> glibc-common [ 1s] cycle: libgcc -> glibc [ 1s] breaking dependency libgcc -> glibc [ 1s] cycle: rpm-libs -> rpm [ 1s] breaking dependency rpm-libs -> rpm [ 1s] [1/52] preinstalling tizen-release... [ 1s] [2/52] preinstalling libgcc... [ 1s] [3/52] preinstalling setup... [ 1s] [4/52] preinstalling filesystem... [ 1s] [5/52] preinstalling glibc... [ 1s] [6/52] preinstalling libattr... [ 1s] [7/52] preinstalling libacl... [ 1s] [8/52] preinstalling bash... [ 1s] [9/52] preinstalling bzip2-libs... [ 1s] [10/52] preinstalling diffutils... [ 1s] [11/52] preinstalling elfutils-libelf... [ 1s] [12/52] preinstalling libcap... [ 1s] [13/52] preinstalling liblua... [ 1s] [14/52] preinstalling libstdc++... [ 1s] [15/52] preinstalling ncurses-libs... [ 1s] [16/52] preinstalling nspr... [ 1s] [17/52] preinstalling nss-softokn-freebl... [ 1s] [18/52] preinstalling popt... [ 1s] [19/52] preinstalling readline... [ 1s] [20/52] preinstalling sed... [ 1s] [21/52] preinstalling sqlite... [ 1s] [22/52] preinstalling xz-libs... [ 1s] [23/52] preinstalling zlib... [ 1s] [24/52] preinstalling glibc-common... [ 1s] [25/52] preinstalling tar... [ 1s] [26/52] preinstalling coreutils... [ 1s] [27/52] preinstalling qemu-linux-user-x86-arm... [ 2s] [28/52] preinstalling tizen-accelerator... [ 2s] [29/52] preinstalling libfile... [ 2s] [30/52] preinstalling bzip2... [ 2s] [31/52] preinstalling nss... [ 2s] [32/52] preinstalling bzip2-libs-x86-arm... [ 2s] [33/52] preinstalling elfutils-libelf-x86-arm... [ 2s] [34/52] preinstalling glibc-x86-arm... [ 2s] [35/52] preinstalling libacl-x86-arm... [ 2s] [36/52] preinstalling libattr-x86-arm... [ 2s] [37/52] preinstalling libcap-x86-arm... [ 2s] [38/52] preinstalling libgcc-x86-arm... [ 2s] [39/52] preinstalling liblua-x86-arm... [ 2s] [40/52] preinstalling ncurses-libs-x86-arm... [ 2s] [41/52] preinstalling nspr-x86-arm... [ 2s] [42/52] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [43/52] preinstalling nss-x86-arm... [ 2s] [44/52] preinstalling popt-x86-arm... [ 2s] [45/52] preinstalling sqlite-x86-arm... [ 2s] [46/52] preinstalling xz-libs-x86-arm... [ 2s] [47/52] preinstalling zlib-x86-arm... [ 2s] [48/52] preinstalling rpm-libs... [ 2s] [49/52] preinstalling bash-x86-arm... [ 2s] [50/52] preinstalling rpm-libs-x86-arm... [ 2s] [51/52] preinstalling rpm... [ 2s] [52/52] preinstalling rpm-x86-arm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 3s] [4/8] preinstalling grep... [ 3s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 3s] copying packages... [ 4s] reordering...cycle: bash -> glibc -> glibc-common [ 4s] breaking dependency glibc-common -> bash [ 4s] cycle: bash -> glibc -> glibc-common -> coreutils [ 4s] breaking dependency glibc-common -> coreutils [ 4s] cycle: glibc -> glibc-common -> findutils [ 4s] breaking dependency glibc-common -> findutils [ 4s] cycle: glibc -> glibc-common [ 4s] breaking dependency glibc-common -> glibc [ 4s] cycle: glibc -> glibc-common -> grep [ 4s] breaking dependency grep -> glibc [ 4s] cycle: glibc -> glibc-common -> grep -> libgcc [ 4s] breaking dependency grep -> libgcc [ 4s] cycle: glibc -> glibc-common -> grep -> libpcre [ 4s] breaking dependency libpcre -> glibc [ 4s] cycle: glibc -> glibc-common -> grep -> libpcre -> libgcc [ 4s] breaking dependency libpcre -> libgcc [ 4s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++ [ 4s] breaking dependency libstdc++ -> glibc [ 4s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 4s] breaking dependency glibc -> glibc-common [ 4s] cycle: glibc -> libgcc [ 4s] breaking dependency libgcc -> glibc [ 4s] cycle: filesystem -> setup [ 4s] breaking dependency setup -> filesystem [ 4s] cycle: gio-branding-upstream -> libgio [ 4s] breaking dependency libgio -> gio-branding-upstream [ 4s] cycle: ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses [ 4s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses-base [ 4s] cycle: perl -> perl-libs [ 4s] breaking dependency perl -> perl-libs [ 4s] cycle: perl -> perl-IO-Compress-Zlib [ 4s] breaking dependency perl -> perl-IO-Compress-Zlib [ 4s] cycle: perl -> perl-IO-Compress-Base [ 4s] breaking dependency perl -> perl-IO-Compress-Base [ 4s] cycle: perl -> perl-Module-Pluggable [ 4s] breaking dependency perl -> perl-Module-Pluggable [ 4s] cycle: perl -> perl-Pod-Simple [ 4s] breaking dependency perl -> perl-Pod-Simple [ 4s] cycle: nss -> nss-sysinit [ 4s] breaking dependency nss -> nss-sysinit [ 4s] cycle: rpm-libs -> rpm [ 4s] breaking dependency rpm-libs -> rpm [ 4s] done [ 8s] booting kvm ... [ 8s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 8000 -drive file=/srv/build/root_2/root,if=virtio,cache=none -drive file=/srv/build/root_2/root,if=ide,index=0,cache=none -drive file=/srv/build/root_2/swap,if=virtio,cache=none -smp 4 [ 14s] doing fast boot [ 14s] Creating device nodes with udev [ 23s] Waiting for device /dev/vda to appear: ok [ 23s] fsck from util-linux 2.21.2 [ 23s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 24s] /dev/vda: clean, 4707/2392064 files, 224914/9568256 blocks [ 24s] fsck succeeded. Mounting root device read-write. [ 24s] Mounting root /dev/vda [ 24s] mount -o rw -t ext4 /dev/vda /root [ 44s] replacing /etc/mtab with symlink to /proc/self/mounts [ 48s] /.build/qemu-reg: line 9: interpreter '/usr/bin/qemu-armeb-binfmt' not found, ignoring [ 48s] /.build/qemu-reg: line 10: interpreter '/usr/bin/qemu-ppc-binfmt' not found, ignoring [ 48s] /.build/qemu-reg: line 11: interpreter '/usr/bin/qemu-mips-binfmt' not found, ignoring [ 48s] /.build/qemu-reg: line 12: interpreter '/usr/bin/qemu-mipsel-binfmt' not found, ignoring [ 48s] /.build/qemu-reg: line 18: interpreter '/usr/bin/qemu-sh4-binfmt' not found, ignoring [ 48s] /.build/qemu-reg: line 19: interpreter '/usr/bin/qemu-sh4eb-binfmt' not found, ignoring [ 67s] 2nd stage started in virtual machine [ 67s] machine type: armv7l [ 68s] swapon on /dev/vdb [ 68s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 68s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 70s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 71s] logging output to //.build.log... [ 72s] processing specfile /.build-srcdir/_service:gbs:atk.spec ... [ 72s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:atk.spec build rpmlint-Factory ... [ 91s] running rpm-x86-arm postinstall script [ 93s] running rpm-libs-x86-arm postinstall script [ 94s] running tizen-accelerator postinstall script [ 97s] running glibc-x86-arm postinstall script [ 99s] running bash-x86-arm postinstall script [ 99s] initializing rpm db... [ 108s] [1/182] cumulate cross-armv7l-platformfile-0.0.1-1.1 [ 109s] [2/182] cumulate kernel-headers-3.4.91-1.1 [ 109s] [3/182] cumulate tizen-release-2.2.0-1.1 [ 110s] [4/182] cumulate tzdata-2014j-1.1 [ 111s] [5/182] cumulate libgcc-4.9.2-2015.02.1.11 [ 111s] [6/182] cumulate setup-0.2-1.1 [ 113s] [7/182] cumulate filesystem-0.1-1.1 [ 113s] [8/182] cumulate glibc-2.20-2014.11.1.10 [ 113s] [9/182] cumulate libstdc++-4.9.2-2015.02.1.11 [ 115s] [10/182] cumulate libatomic-4.9.2-2015.02.1.11 [ 115s] [11/182] cumulate libgomp-4.9.2-2015.02.1.11 [ 115s] [12/182] cumulate openssl-1.0.1p-1.5 [ 116s] [13/182] cumulate bash-4.1-1.6 [ 116s] [14/182] cumulate bzip2-libs-1.0.5-1.8 [ 116s] [15/182] cumulate cpio-2.8-1.6 [ 116s] [16/182] cumulate db4-4.8.30-1.8 [ 116s] [17/182] cumulate diffutils-3.0-1.6 [ 116s] [18/182] cumulate e2fsprogs-libs-1.41.9-1.4 [ 117s] [19/182] cumulate elfutils-libelf-0.152-1.12 [ 117s] [20/182] cumulate expat-2.0.1-1.8 [ 117s] [21/182] cumulate fdupes-1.40-1.5 [ 117s] [22/182] cumulate findutils-4.2.31-1.5 [ 117s] [23/182] cumulate gdbm-1.8.3-1.12 [ 118s] [24/182] cumulate libattr-2.4.44-1.8 [ 118s] [25/182] cumulate libffi-3.1-1.1 [ 118s] [26/182] cumulate libglib-2.44.1-1.1 [ 119s] [27/182] cumulate libitm-4.9.2-2015.02.1.11 [ 119s] [28/182] cumulate liblua-5.1.4-1.6 [ 119s] [29/182] cumulate libuuid-2.20.2-1.4 [ 119s] [30/182] cumulate m4-1.4.14-1.5 [ 120s] [31/182] cumulate net-tools-1.60-2.6 [ 120s] [32/182] cumulate nspr-4.9-1.9 [ 120s] [33/182] cumulate nss-softokn-freebl-3.12.9-1.17 [ 120s] [34/182] cumulate patch-2.6-1.6 [ 120s] [35/182] cumulate pkg-config-0.25-2.6 [ 121s] [36/182] cumulate popt-1.16-1.8 [ 121s] [37/182] cumulate readline-5.2-1.6 [ 122s] [38/182] cumulate ruby-1.9.2-1.6 [ 122s] [39/182] cumulate sed-4.1.5-1.5 [ 122s] [40/182] cumulate sqlite-3.8.10.2-1.8 [ 122s] [41/182] cumulate xz-libs-5.0.3-1.8 [ 122s] [42/182] cumulate zlib-1.2.8-1.8 [ 122s] [43/182] cumulate libasan-4.9.2-2015.02.1.11 [ 122s] [44/182] cumulate libpcre-7.7-1.25 [ 122s] [45/182] cumulate libubsan-4.9.2-2015.02.1.11 [ 122s] [46/182] cumulate patchelf-0.5.svn20809-1.5 [ 122s] [47/182] cumulate ncurses-libs-5.7-1.8 [ 122s] [48/182] cumulate build-compare-2009.10.14-1.6 [ 122s] [49/182] cumulate qemu-linux-user-x86-arm-2.2.0-4.1.1 [ 122s] [50/182] cumulate which-0.1-1.1 [ 122s] [51/182] cumulate cpp-4.9.2-2015.02.1.11 [ 122s] [52/182] cumulate glibc-headers-2.20-2014.11.1.10 [ 122s] [53/182] cumulate libcap-2.21-1.6 [ 122s] [54/182] cumulate unzip-6.0-1.12 [ 122s] [55/182] cumulate grep-2.5.1a-1.5 [ 122s] [56/182] cumulate libacl-2.2.49-1.5 [ 122s] [57/182] cumulate libfile-5.04-1.7 [ 122s] [58/182] cumulate libgmodule-2.44.1-1.1 [ 122s] [59/182] cumulate libgthread-2.44.1-1.1 [ 123s] [60/182] cumulate libpython-2.7.1-1.5 [ 123s] [61/182] cumulate libxml2-2.9.2-1.3 [ 123s] [62/182] cumulate make-3.82-154.1.6 [ 123s] [63/182] cumulate ncurses-5.7-1.8 [ 123s] [64/182] cumulate pcre-7.7-1.25 [ 123s] [65/182] cumulate psmisc-22.20-1.6 [ 123s] [66/182] cumulate binutils-2.25.0-2015.01.1.8 [ 123s] [67/182] cumulate bzip2-1.0.5-1.8 [ 123s] [68/182] cumulate gettext-runtime-0.18.3.2-1.12 [ 124s] [69/182] cumulate libblkid-2.20.2-1.4 [ 124s] [70/182] cumulate libgobject-2.44.1-1.1 [ 124s] [71/182] cumulate xz-5.0.3-1.8 [ 124s] [72/182] cumulate elfutils-libs-0.152-1.12 [ 124s] [73/182] cumulate nss-3.12.9-1.17 [ 124s] [74/182] cumulate perl-5.12.1-1.25 [ 125s] [75/182] cumulate ncurses-base-5.7-1.8 [ 125s] [76/182] cumulate perl-HTML-Tagset-3.20-1.1 [ 125s] [77/182] cumulate perl-IO-Compress-Base-2.008-1.25 [ 125s] [78/182] cumulate perl-Module-Pluggable-3.60-1.25 [ 125s] [79/182] cumulate perl-Pod-Escapes-1.04-1.25 [ 125s] [80/182] cumulate perl-TimeDate-1.20-1.1 [ 125s] [81/182] cumulate perl-URI-1.54-1.1 [ 125s] [82/182] cumulate glibc-devel-2.20-2014.11.1.10 [ 125s] [83/182] cumulate file-5.04-1.7 [ 125s] [84/182] cumulate libxslt-1.1.28-1.2 [ 125s] [85/182] cumulate perl-Compress-Raw-Zlib-2.008-1.25 [ 125s] [86/182] cumulate perl-libs-5.12.1-1.25 [ 125s] [87/182] cumulate tar-1.17-1.6 [ 125s] [88/182] cumulate coreutils-6.9-1.6 [ 125s] [89/182] cumulate libmount-2.20.2-1.4 [ 125s] [90/182] cumulate xz-lzma-compat-5.0.3-1.8 [ 125s] [91/182] cumulate elfutils-0.152-1.12 [ 125s] [92/182] cumulate nss-sysinit-3.12.9-1.17 [ 125s] [93/182] cumulate python-base-2.7.1-1.5 [ 125s] [94/182] cumulate glibc-common-2.20-2014.11.1.10 [ 126s] [95/182] cumulate libgio-2.44.1-1.1 [ 126s] [96/182] cumulate libarchive-2.8.3-1.2 [ 126s] [97/182] cumulate rpm-libs-4.9.1-4.3.1.10 [ 126s] [98/182] cumulate gio-branding-upstream-2.44.1-1.1 [ 126s] [99/182] cumulate libstdc++-devel-4.9.2-2015.02.1.11 [ 126s] [100/182] cumulate perl-Pod-Simple-3.07-1.25 [ 126s] [101/182] cumulate tizen-accelerator-1.0.1-1.1 [ 126s] [102/182] cumulate perl-IO-Compress-Zlib-2.008-1.25 [ 126s] [103/182] cumulate gawk-3.1.5-1.6 [ 126s] [104/182] cumulate gzip-1.3.12-1.6 [ 126s] [105/182] cumulate perl-HTML-Parser-3.65-1.5 [ 126s] [106/182] cumulate python-xml-2.7.1-1.5 [ 126s] [107/182] cumulate autoconf-2.68-1.1 [ 126s] [108/182] cumulate build-2011.01.10a-1.1 [ 126s] [109/182] cumulate gettext-tools-0.18.3.2-1.12 [ 127s] [110/182] installing rpm-4.9.1-4.3.1.10 [ 127s] [111/182] cumulate python-lxml-2.2.3-1.2 [ 127s] [112/182] cumulate glib2-tools-2.44.1-1.1 [ 127s] [113/182] cumulate util-linux-2.20.2-1.4 [ 127s] [114/182] cumulate cmake-2.8.5-1.1.2 [ 127s] [115/182] cumulate python-2.7.1-1.3 [ 128s] [116/182] cumulate gcc-4.9.2-2015.02.1.11 [ 128s] [117/182] cumulate automake-1.11.1-1.1 [ 128s] [118/182] cumulate bzip2-libs-x86-arm-1.0.5-9.1.4 [ 128s] [119/182] cumulate elfutils-libelf-x86-arm-0.152-9.1.4 [ 128s] [120/182] cumulate elfutils-libs-x86-arm-0.152-9.1.4 [ 128s] [121/182] cumulate expat-x86-arm-2.0.1-1.4 [ 128s] [122/182] cumulate glibc-x86-arm-2.20-9.1.5 [ 128s] [123/182] cumulate libacl-x86-arm-2.2.49-9.1.4 [ 128s] [124/182] cumulate libarchive-x86-arm-2.8.3-1.3 [ 128s] [125/182] cumulate libattr-x86-arm-2.4.44-9.1.4 [ 128s] [126/182] cumulate libcap-x86-arm-2.21-9.1.4 [ 128s] [127/182] cumulate libfile-x86-arm-5.04-9.1.4 [ 128s] [128/182] cumulate libgcc-x86-arm-4.9.2-9.1.4 [ 128s] [129/182] cumulate liblua-x86-arm-5.1.4-9.1.3 [ 128s] [130/182] cumulate libpython-x86-arm-2.7.1-9.1.3 [ 129s] [131/182] cumulate libstdc++-x86-arm-4.9.2-9.1.4 [ 129s] [132/182] cumulate libxml2-x86-arm-2.9.2-9.1.3 [ 129s] [133/182] cumulate libxslt-x86-arm-1.1.28-9.1.3 [ 129s] [134/182] cumulate ncurses-libs-x86-arm-5.7-9.1.3 [ 129s] [135/182] cumulate nspr-x86-arm-4.9-9.1.5 [ 129s] [136/182] cumulate nss-softokn-freebl-x86-arm-3.12.9-9.1.5 [ 129s] [137/182] cumulate nss-x86-arm-3.12.9-9.1.5 [ 129s] [138/182] cumulate openssl-x86-arm-1.0.1p-9.1.3 [ 129s] [139/182] cumulate perl-libs-x86-arm-5.12.1-9.1.5 [ 129s] [140/182] cumulate popt-x86-arm-1.16-9.1.4 [ 129s] [141/182] cumulate python-lxml-x86-arm-2.2.3-9.1.3 [ 129s] [142/182] cumulate python-x86-arm-2.7.1-9.1.3 [ 129s] [143/182] cumulate python-xml-x86-arm-2.7.1-9.1.3 [ 129s] [144/182] cumulate rpm-libs-x86-arm-4.9.1-9.1.4 [ 130s] [145/182] cumulate sqlite-x86-arm-3.8.10.2-9.1.3 [ 130s] [146/182] cumulate xz-libs-x86-arm-5.0.3-9.1.4 [ 130s] [147/182] cumulate zlib-x86-arm-1.2.8-9.1.4 [ 130s] [148/182] cumulate gcc-c++-4.9.2-2015.02.1.11 [ 130s] [149/182] cumulate perl-Compress-Zlib-2.008-1.25 [ 130s] [150/182] cumulate glib2-devel-2.44.1-1.1 [ 130s] [151/182] cumulate rpm-build-4.9.1-4.3.1.10 [ 130s] [152/182] cumulate bash-x86-arm-4.1-9.1.4 [ 130s] [153/182] cumulate diffutils-x86-arm-3.0-9.1.4 [ 130s] [154/182] cumulate fdupes-x86-arm-1.40-9.1.4 [ 130s] [155/182] cumulate findutils-x86-arm-4.2.31-9.1.4 [ 130s] [156/182] cumulate gawk-x86-arm-3.1.5-9.1.3 [ 130s] [157/182] cumulate gzip-x86-arm-1.3.12-9.1.4 [ 130s] [158/182] cumulate libtool-2.2.6b-1.8 [ 130s] [159/182] cumulate m4-x86-arm-1.4.14-9.1.4 [ 130s] [160/182] cumulate make-x86-arm-3.82-9.1.3 [ 130s] [161/182] cumulate patch-x86-arm-2.6-9.1.4 [ 131s] [162/182] cumulate perl-libwww-perl-5.836-1.1 [ 131s] [163/182] cumulate pkg-config-x86-arm-0.25-9.1.4 [ 131s] [164/182] cumulate ruby-x86-arm-1.9.2-9.1.4 [ 131s] [165/182] cumulate sed-x86-arm-4.1.5-9.1.4 [ 131s] [166/182] cumulate bzip2-x86-arm-1.0.5-1.4 [ 131s] [167/182] cumulate perl-x86-arm-5.12.1-9.1.5 [ 131s] [168/182] cumulate python-base-x86-arm-2.7.1-9.1.3 [ 131s] [169/182] cumulate coreutils-x86-arm-6.9-9.1.4 [ 131s] [170/182] cumulate cross-armv7l-gcc-accel-x86-armv7l-4.9.2-2015.02.1.6 [ 131s] [171/182] cumulate file-x86-arm-5.04-9.1.4 [ 131s] [172/182] cumulate tar-x86-arm-1.17-9.1.4 [ 131s] [173/182] cumulate elfutils-x86-arm-0.152-9.1.4 [ 131s] [174/182] cumulate cmake-x86-arm-2.8.5-1.3 [ 131s] [175/182] cumulate rpm-x86-arm-4.9.1-9.1.4 [ 131s] [176/182] cumulate rpm-build-x86-arm-4.9.1-9.1.4 [ 131s] [177/182] cumulate perl-HTML-Parser-x86-arm-3.65-9.1.3 [ 131s] [178/182] cumulate cross-armv7l-binutils-accel-x86-armv7l-2.25.0-2015.01.1.3 [ 131s] [179/182] cumulate perl-XML-Parser-2.36-1.6 [ 131s] [180/182] cumulate perl-XML-Parser-x86-arm-2.36-9.1.3 [ 131s] [181/182] cumulate intltool-0.41.0-1.1 [ 131s] [182/182] now installing cumulated packages [ 137s] Preparing... ################################################## [ 137s] setup ################################################## [ 137s] filesystem ################################################## [ 138s] tzdata ################################################## [ 138s] tizen-release ################################################## [ 138s] kernel-headers ################################################## [ 138s] cross-armv7l-platformfile ################################################## [ 138s] bash ################################################## [ 138s] findutils ################################################## [ 138s] grep ################################################## [ 138s] coreutils ################################################## [ 138s] glibc-common ################################################## [ 138s] libgcc ################################################## [ 138s] /sbin/ldconfig: relative path `1' used to build cache [ 138s] warning: %post(libgcc-4.9.2-2015.02.1.11.armv7l) scriptlet failed, exit status 1 [ 139s] glibc ################################################## [ 139s] libstdc++ ################################################## [ 139s] libattr ################################################## [ 139s] libacl ################################################## [ 139s] libpcre ################################################## [ 139s] tizen-accelerator ################################################## [ 140s] glibc-x86-arm ################################################## [ 140s] libattr-x86-arm ################################################## [ 140s] libacl-x86-arm ################################################## [ 141s] libgcc-x86-arm ################################################## [ 141s] libstdc++-x86-arm ################################################## [ 141s] glibc-headers ################################################## [ 141s] glibc-devel ################################################## [ 141s] libstdc++-devel ################################################## [ 141s] coreutils-x86-arm ################################################## [ 144s] bash-x86-arm ################################################## [ 144s] findutils-x86-arm ################################################## [ 144s] build-compare ################################################## [ 145s] qemu-linux-user-x86-arm ################################################## [ 145s] which ################################################## [ 145s] zlib ################################################## [ 145s] zlib-x86-arm ################################################## [ 146s] bzip2-libs ################################################## [ 146s] elfutils-libelf ################################################## [ 146s] libglib ################################################## [ 146s] bzip2-libs-x86-arm ################################################## [ 146s] xz-libs ################################################## [ 146s] ncurses-libs ################################################## [ 146s] ncurses ################################################## [ 146s] ncurses-base ################################################## [ 146s] libpython ################################################## [ 146s] python-base ################################################## [ 146s] libxml2 ################################################## [ 146s] binutils ################################################## [ 146s] xz-libs-x86-arm ################################################## [ 146s] elfutils-libelf-x86-arm ################################################## [ 146s] libgmodule ################################################## [ 146s] libfile ################################################## [ 147s] openssl ################################################## [ 147s] expat ################################################## [ 147s] libuuid ################################################## [ 147s] nspr ################################################## [ 147s] patch ################################################## [ 147s] pkg-config ################################################## [ 147s] popt ################################################## [ 147s] sed ################################################## [ 147s] sqlite ################################################## [ 147s] popt-x86-arm ################################################## [ 147s] nspr-x86-arm ################################################## [ 147s] libfile-x86-arm ################################################## [ 148s] libblkid ################################################## [ 148s] libarchive ################################################## [ 148s] file ################################################## [ 148s] libxslt ################################################## [ 148s] python-xml ################################################## [ 148s] xz ################################################## [ 148s] elfutils-libs ################################################## [ 148s] elfutils ################################################## [ 148s] bzip2 ################################################## [ 148s] tar ################################################## [ 149s] libcap ################################################## [ 149s] libcap-x86-arm ################################################## [ 149s] diffutils ################################################## [ 149s] liblua ################################################## [ 149s] liblua-x86-arm ################################################## [ 149s] m4 ################################################## [ 149s] nss-softokn-freebl ################################################## [ 149s] nss ################################################## [ 149s] nss-sysinit ################################################## [ 150s] nss-x86-arm ################################################## [ 150s] rpm-libs ################################################## [ 151s] rpm-libs-x86-arm ################################################## [ 151s] gawk ################################################## [ 151s] gzip ################################################## [ 151s] elfutils-libs-x86-arm ################################################## [ 151s] libarchive-x86-arm ################################################## [ 151s] openssl-x86-arm ################################################## [ 151s] libxml2-x86-arm ################################################## [ 151s] libpython-x86-arm ################################################## [ 151s] xz-lzma-compat ################################################## [ 151s] python-lxml ################################################## [ 151s] cmake ################################################## [ 151s] libmount ################################################## [ 151s] libgthread ################################################## [ 151s] cpp ################################################## [ 152s] libasan ################################################## [ 152s] libubsan ################################################## [ 152s] gettext-runtime ################################################## [ 152s] gettext-tools ################################################## [ 152s] libatomic ################################################## [ 152s] libgomp ################################################## [ 152s] cpio ################################################## [ 152s] db4 ################################################## [ 152s] fdupes ################################################## [ 152s] gdbm ################################################## [ 153s] perl-Pod-Escapes ################################################## [ 153s] perl-Compress-Raw-Zlib ################################################## [ 153s] perl-IO-Compress-Base ################################################## [ 153s] perl-Module-Pluggable ################################################## [ 153s] perl-Pod-Simple ################################################## [ 153s] perl-IO-Compress-Zlib ################################################## [ 153s] perl-libs ################################################## [ 157s] perl ################################################## [ 157s] perl-URI ################################################## [ 157s] autoconf ################################################## [ 157s] automake ################################################## [ 157s] perl-HTML-Tagset ################################################## [ 157s] perl-TimeDate ################################################## [ 157s] perl-Compress-Zlib ################################################## [ 158s] perl-libs-x86-arm ################################################## [ 159s] perl-x86-arm ################################################## [ 160s] perl-HTML-Parser ################################################## [ 161s] perl-libwww-perl ################################################## [ 161s] perl-XML-Parser ################################################## [ 161s] libffi ################################################## [ 161s] libgobject ################################################## [ 161s] gio-branding-upstream ################################################## [ 161s] libgio ################################################## [ 161s] glib2-tools ################################################## [ 161s] libitm ################################################## [ 165s] gcc ################################################## [ 166s] gcc-c++ ################################################## [ 173s] cross-armv7l-gcc-accel-x86-a################################################## [ 174s] "GCCVER: 4.9 GCCVER_NEW: 4.9 " [ 174s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 174s] readline ################################################## [ 174s] python ################################################## [ 175s] ruby ################################################## [ 175s] unzip ################################################## [ 175s] rpm-build ################################################## [ 175s] make ################################################## [ 178s] make-x86-arm ################################################## [ 178s] rpm-build-x86-arm ################################################## [ 181s] ruby-x86-arm ################################################## [ 181s] python-x86-arm ################################################## [ 182s] cross-armv7l-binutils-accel-################################################## [ 182s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/addr2line': File exists [ 182s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ar': File exists [ 182s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/as': File exists [ 182s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/c++filt': File exists [ 182s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/elfedit': File exists [ 182s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/gprof': File exists [ 182s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld': File exists [ 182s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld.bfd': File exists [ 182s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld.gold': File exists [ 182s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/nm': File exists [ 183s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/objcopy': File exists [ 183s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/objdump': File exists [ 183s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ranlib': File exists [ 183s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/readelf': File exists [ 183s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/size': File exists [ 183s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/strings': File exists [ 183s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/strip': File exists [ 183s] perl-XML-Parser-x86-arm ################################################## [ 183s] intltool ################################################## [ 183s] perl-HTML-Parser-x86-arm ################################################## [ 183s] build ################################################## [ 184s] libtool ################################################## [ 184s] fdupes-x86-arm ################################################## [ 185s] cmake-x86-arm ################################################## [ 186s] python-lxml-x86-arm ################################################## [ 186s] python-base-x86-arm ################################################## [ 187s] elfutils-x86-arm ################################################## [ 187s] gzip-x86-arm ################################################## [ 187s] gawk-x86-arm ################################################## [ 188s] rpm-x86-arm ################################################## [ 188s] /bin/rpm.orig-arm already present - skipping. [ 188s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 188s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 188s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 188s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 188s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 188s] nss-softokn-freebl-x86-arm ################################################## [ 188s] m4-x86-arm ################################################## [ 189s] diffutils-x86-arm ################################################## [ 189s] tar-x86-arm ################################################## [ 189s] bzip2-x86-arm ################################################## [ 190s] python-xml-x86-arm ################################################## [ 191s] libxslt-x86-arm ################################################## [ 191s] mv: cannot stat `/usr/bin/xsltproc': No such file or directory [ 191s] file-x86-arm ################################################## [ 197s] sqlite-x86-arm ################################################## [ 197s] sed-x86-arm ################################################## [ 197s] pkg-config-x86-arm ################################################## [ 198s] patch-x86-arm ################################################## [ 198s] expat-x86-arm ################################################## [ 198s] ncurses-libs-x86-arm ################################################## [ 198s] glib2-devel ################################################## [ 199s] util-linux ################################################## [ 199s] psmisc ################################################## [ 199s] pcre ################################################## [ 199s] patchelf ################################################## [ 199s] e2fsprogs-libs ################################################## [ 200s] net-tools ################################################## [ 200s] removing nis flags from //etc/nsswitch.conf... [ 200s] now finalizing build dir... [ 208s] build target is armv7l-tizen-linux [ 208s] ----------------------------------------------------------------- [ 208s] I have the following modifications for atk.spec: [ 208s] 5c5 [ 208s] < Release: 0 [ 208s] --- [ 208s] > Release: %{?release_prefix:%{release_prefix}.}1.1 [ 208s] 90a91 [ 208s] > %changelog [ 208s] ----------------------------------------------------------------- [ 208s] ----- building atk.spec (user abuild) [ 208s] ----------------------------------------------------------------- [ 208s] ----------------------------------------------------------------- [ 209s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:2.4:Mobile/target-TM1/04b49dce4942b1e344a2acd153080b18-atk' /home/abuild/rpmbuild/SOURCES/atk.spec [ 209s] Building target platforms: armv7l-tizen-linux [ 209s] Building for target armv7l-tizen-linux [ 209s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.3wUcti [ 209s] + umask 022 [ 209s] + cd /home/abuild/rpmbuild/BUILD [ 209s] + cd /home/abuild/rpmbuild/BUILD [ 209s] + rm -rf atk-2.12.0 [ 209s] + /bin/tar -xf - [ 209s] + /usr/bin/xz -dc /home/abuild/rpmbuild/SOURCES/atk-2.12.0.tar.xz [ 209s] + STATUS=0 [ 209s] + '[' 0 -ne 0 ']' [ 209s] + cd atk-2.12.0 [ 209s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 209s] + exit 0 [ 209s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.xqlJik [ 209s] + umask 022 [ 209s] + cd /home/abuild/rpmbuild/BUILD [ 209s] + cd atk-2.12.0 [ 209s] + LANG=C [ 209s] + export LANG [ 209s] + unset DISPLAY [ 209s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 209s] + export CFLAGS [ 209s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 209s] + export CXXFLAGS [ 209s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 209s] + export FFLAGS [ 209s] + LD_AS_NEEDED=1 [ 209s] + export LD_AS_NEEDED [ 209s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 209s] + export CFLAGS [ 209s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 209s] + export CXXFLAGS [ 209s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 209s] + export FFLAGS [ 209s] + ./autogen.sh --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static [ 209s] You don't have gtk-doc installed, and thus won't be able to generate the documentation. [ 209s] autoreconf: Entering directory `.' [ 209s] autoreconf: configure.ac: not using Gettext [ 210s] autoreconf: running: aclocal --force --warnings=no-portability -I m4 ${ACLOCAL_FLAGS} [ 212s] autoreconf: configure.ac: tracing [ 212s] autoreconf: running: libtoolize --copy --force [ 212s] libtoolize: putting auxiliary files in `.'. [ 212s] libtoolize: copying file `./ltmain.sh' [ 212s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 212s] libtoolize: copying file `m4/libtool.m4' [ 212s] libtoolize: copying file `m4/ltoptions.m4' [ 212s] libtoolize: copying file `m4/ltsugar.m4' [ 212s] libtoolize: copying file `m4/ltversion.m4' [ 212s] libtoolize: copying file `m4/lt~obsolete.m4' [ 214s] autoreconf: running: /usr/bin/autoconf --force --warnings=no-portability [ 215s] autoreconf: running: /usr/bin/autoheader --force --warnings=no-portability [ 215s] autoreconf: running: automake --add-missing --copy --force-missing --warnings=no-portability [ 216s] configure.ac:93: installing `./config.guess' [ 216s] configure.ac:93: installing `./config.sub' [ 216s] configure.ac:50: installing `./install-sh' [ 216s] configure.ac:50: installing `./missing' [ 217s] atk/Makefile.am: installing `./depcomp' [ 217s] Makefile.am: installing `./INSTALL' [ 217s] autoreconf: Leaving directory `.' [ 217s] checking for a BSD-compatible install... /usr/bin/install -c [ 218s] checking whether build environment is sane... yes [ 218s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 218s] checking for gawk... gawk [ 218s] checking whether make sets $(MAKE)... yes [ 218s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 220s] checking whether the C compiler works... yes [ 220s] checking for C compiler default output file name... a.out [ 220s] checking for suffix of executables... [ 220s] checking whether we are cross compiling... no [ 220s] checking for suffix of object files... o [ 220s] checking whether we are using the GNU C compiler... yes [ 221s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 221s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 221s] checking for style of include used by make... GNU [ 221s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 221s] checking build system type... armv7l-tizen-linux-gnueabi [ 221s] checking host system type... armv7l-tizen-linux-gnueabi [ 221s] checking for a sed that does not truncate output... /bin/sed [ 221s] checking for grep that handles long lines and -e... /bin/grep [ 221s] checking for egrep... /bin/grep -E [ 221s] checking for fgrep... /bin/grep -F [ 221s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld [ 221s] checking if the linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld) is GNU ld... yes [ 221s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 221s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 221s] checking whether ln -s works... yes [ 221s] checking the maximum length of command line arguments... 1572864 [ 221s] checking whether the shell understands some XSI constructs... yes [ 221s] checking whether the shell understands "+="... yes [ 221s] checking for /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld option to reload object files... -r [ 221s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 221s] checking for objdump... objdump [ 221s] checking how to recognize dependent libraries... pass_all [ 221s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 221s] checking for ar... ar [ 221s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 221s] checking for strip... strip [ 221s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 221s] checking for ranlib... ranlib [ 222s] checking command to parse /usr/bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 222s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 223s] checking for ANSI C header files... yes [ 224s] checking for sys/types.h... yes [ 224s] checking for sys/stat.h... yes [ 224s] checking for stdlib.h... yes [ 224s] checking for string.h... yes [ 224s] checking for memory.h... yes [ 224s] checking for strings.h... yes [ 224s] checking for inttypes.h... yes [ 224s] checking for stdint.h... yes [ 224s] checking for unistd.h... yes [ 224s] checking for dlfcn.h... yes [ 224s] checking for objdir... .libs [ 224s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 224s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 224s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 225s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 225s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 225s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 225s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld) supports shared libraries... yes [ 225s] checking whether -lc should be explicitly linked in... no [ 225s] checking dynamic linker characteristics... GNU/Linux ld.so [ 225s] checking how to hardcode library paths into programs... immediate [ 225s] checking whether stripping libraries is possible... yes [ 225s] checking if libtool supports shared libraries... yes [ 225s] checking whether to build shared libraries... yes [ 225s] checking whether to build static libraries... no [ 225s] checking for bind_textdomain_codeset... yes [ 225s] checking for some Win32 platform... no [ 225s] checking for native Win32 platform... no [ 225s] checking for aclocal flags... [ 225s] checking for armv7l-tizen-linux-gnueabi-pkg-config... no [ 225s] checking for pkg-config... /usr/bin/pkg-config [ 225s] checking pkg-config is at least version 0.16... yes [ 225s] checking for GLIB - version >= 2.31.2... yes (version 2.44.1) [ 225s] checking for DEP... yes [ 225s] checking locale.h usability... yes [ 225s] checking locale.h presence... yes [ 225s] checking for locale.h... yes [ 226s] checking for LC_MESSAGES... yes [ 226s] checking libintl.h usability... yes [ 226s] checking libintl.h presence... yes [ 226s] checking for libintl.h... yes [ 226s] checking for ngettext in libc... yes [ 226s] checking for dgettext in libc... yes [ 226s] checking for bind_textdomain_codeset... (cached) yes [ 226s] checking for msgfmt... /usr/bin/msgfmt [ 226s] checking for dcgettext... yes [ 226s] checking if msgfmt accepts -c... yes [ 226s] checking for gmsgfmt... /usr/bin/msgfmt [ 226s] checking for xgettext... /usr/bin/xgettext [ 226s] checking for catalogs to be installed... af am an ar as ast az be be@latin bg bn bn_IN bs ca ca@valencia cs cy da de dz el en_CA en_GB en@shaw eo es et eu fa fi fr ga gl gu he hi hr hu hy id is it ja ka kk km kn ko ku li lt lv mai mk ml mn mr ms nb ne nl nn oc or pa pl ps pt pt_BR ro ru rw si sk sl sq sr sr@latin sr@ije sv ta te tg th tk tr tt ug uk vi wa xh yi zh_CN zh_HK zh_TW zu [ 226s] checking for gawk... (cached) gawk [ 226s] checking for perl5... no [ 226s] checking for perl... perl [ 226s] checking for a Python interpreter with version >= 2.5... python [ 226s] checking for python... /usr/bin/python [ 226s] checking for python version... 2.7 [ 226s] checking for python platform... linux3 [ 226s] checking for python script directory... ${prefix}/lib/python2.7/site-packages [ 226s] checking for python extension module directory... ${exec_prefix}/lib/python2.7/site-packages [ 227s] configure: creating ./config.status [ 227s] config.status: creating Makefile [ 227s] config.status: creating atk.pc [ 227s] config.status: creating atk-uninstalled.pc [ 227s] config.status: creating atk/Makefile [ 227s] config.status: creating atk/atk.rc [ 227s] config.status: creating atk/atkversion.h [ 227s] config.status: creating tests/Makefile [ 227s] config.status: creating build/Makefile [ 227s] config.status: creating build/win32/Makefile [ 227s] config.status: creating build/win32/vs9/Makefile [ 227s] config.status: creating build/win32/vs10/Makefile [ 227s] config.status: creating docs/Makefile [ 227s] config.status: creating docs/version.xml [ 227s] config.status: creating atk.spec [ 227s] config.status: creating atk-zip.sh [ 227s] config.status: creating config.h.win32 [ 227s] config.status: creating config.h [ 227s] config.status: executing depfiles commands [ 228s] config.status: executing libtool commands [ 228s] config.status: executing default-1 commands [ 228s] + make -j4 [ 228s] make all-recursive [ 228s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0' [ 228s] Making all in atk [ 228s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/atk' [ 228s] GEN stamp-atkmarshal.h [ 228s] GEN stamp-atkmarshal.c [ 228s] GEN s-enum-types-h [ 228s] GEN s-enum-types-c [ 228s] make all-am [ 228s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/atk' [ 228s] CC atkaction.lo [ 228s] CC atkcomponent.lo [ 228s] CC atkdocument.lo [ 228s] CC atkeditabletext.lo [ 228s] CC atkgobjectaccessible.lo [ 228s] CC atkhyperlink.lo [ 228s] CC atkhyperlinkimpl.lo [ 228s] CC atkhypertext.lo [ 228s] CC atkimage.lo [ 228s] CC atknoopobject.lo [ 228s] CC atknoopobjectfactory.lo [ 228s] CC atkobject.lo [ 228s] CC atkobjectfactory.lo [ 228s] CC atkplug.lo [ 228s] CC atkprivate.lo [ 228s] atkobject.c: In function 'atk_object_real_set_property': [ 228s] atkobject.c:1317:9: warning: 'atk_value_set_current_value' is deprecated (declared at ../atk/atkvalue.h:135): Use 'atk_value_set_value' instead [-Wdeprecated-declarations] [ 228s] atk_value_set_current_value (ATK_VALUE (accessible), value); [ 228s] ^ [ 228s] atkobject.c: In function 'atk_object_real_get_property': [ 228s] atkobject.c:1366:9: warning: 'atk_value_get_current_value' is deprecated (declared at ../atk/atkvalue.h:125): Use 'atk_value_get_value_and_text' instead [-Wdeprecated-declarations] [ 228s] atk_value_get_current_value (ATK_VALUE (accessible), value); [ 228s] ^ [ 228s] CC atkrange.lo [ 228s] CC atkregistry.lo [ 228s] CC atkrelation.lo [ 229s] atkrelation.c: In function 'atk_relation_new': [ 229s] atkrelation.c:252:3: warning: 'g_value_array_new' is deprecated (declared at /usr/include/glib-2.0/gobject/gvaluearray.h:67): Use 'GArray' instead [-Wdeprecated-declarations] [ 229s] array = g_value_array_new (n_targets); [ 229s] ^ [ 229s] atkrelation.c:258:5: warning: 'g_value_array_append' is deprecated (declared at /usr/include/glib-2.0/gobject/gvaluearray.h:80): Use 'GArray' instead [-Wdeprecated-declarations] [ 229s] array = g_value_array_append (array, value); [ 229s] ^ [ 229s] atkrelation.c:268:3: warning: 'g_value_array_free' is deprecated (declared at /usr/include/glib-2.0/gobject/gvaluearray.h:70): Use 'GArray' instead [-Wdeprecated-declarations] [ 229s] g_value_array_free (array); [ 229s] ^ [ 229s] atkrelation.c: In function 'atk_relation_get_ptr_array_from_value_array': [ 229s] atkrelation.c:474:7: warning: 'g_value_array_get_nth' is deprecated (declared at /usr/include/glib-2.0/gobject/gvaluearray.h:63): Use 'GArray' instead [-Wdeprecated-declarations] [ 229s] value = g_value_array_get_nth (array, i); [ 229s] ^ [ 229s] atkrelation.c: In function 'atk_relation_get_value_array_from_ptr_array': [ 229s] atkrelation.c:490:3: warning: 'g_value_array_new' is deprecated (declared at /usr/include/glib-2.0/gobject/gvaluearray.h:67): Use 'GArray' instead [-Wdeprecated-declarations] [ 229s] return_array = g_value_array_new (array->len); [ 229s] ^ [ 229s] atkrelation.c:496:7: warning: 'g_value_array_append' is deprecated (declared at /usr/include/glib-2.0/gobject/gvaluearray.h:80): Use 'GArray' instead [-Wdeprecated-declarations] [ 229s] return_array = g_value_array_append (return_array, value); [ 229s] ^ [ 229s] CC atkrelationset.lo [ 229s] CC atkselection.lo [ 229s] CC atksocket.lo [ 229s] CC atkstate.lo [ 229s] CC atkstateset.lo [ 229s] CC atkstreamablecontent.lo [ 229s] CC atktable.lo [ 229s] CC atktablecell.lo [ 229s] CC atktext.lo [ 229s] CC atkutil.lo [ 229s] CC atkmisc.lo [ 229s] atktext.c: In function 'atk_text_real_get_bounded_ranges': [ 229s] atktext.c:1410:3: warning: 'atk_text_get_text_at_offset' is deprecated (declared at atktext.c:463): Use 'atk_text_get_string_at_offset' instead [-Wdeprecated-declarations] [ 229s] line = atk_text_get_text_at_offset (text, bounds_min_offset, [ 229s] ^ [ 229s] atktext.c:1414:3: warning: 'atk_text_get_text_at_offset' is deprecated (declared at atktext.c:463): Use 'atk_text_get_string_at_offset' instead [-Wdeprecated-declarations] [ 229s] line = atk_text_get_text_at_offset (text, bounds_max_offset, [ 229s] ^ [ 229s] CC atkvalue.lo [ 229s] CC atkversion.lo [ 229s] CC atkwindow.lo [ 229s] CC atk-enum-types.lo [ 229s] CCLD libatk-1.0.la [ 230s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/atk' [ 230s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/atk' [ 230s] Making all in tests [ 230s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/tests' [ 230s] CC testdocument.o [ 230s] CC testrole.o [ 230s] CC testrelation.o [ 230s] CC teststateset.o [ 230s] CC testvalue.o [ 230s] CCLD testdocument [ 230s] CCLD testrole [ 230s] CCLD teststateset [ 230s] CCLD testrelation [ 230s] CCLD testvalue [ 230s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/tests' [ 230s] Making all in docs [ 230s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/docs' [ 230s] make[2]: Nothing to be done for `all'. [ 230s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/docs' [ 230s] Making all in build [ 230s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/build' [ 230s] Making all in win32 [ 230s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/build/win32' [ 230s] Making all in vs9 [ 230s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/build/win32/vs9' [ 230s] make[4]: Nothing to be done for `all'. [ 230s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/build/win32/vs9' [ 230s] Making all in vs10 [ 230s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/build/win32/vs10' [ 230s] make[4]: Nothing to be done for `all'. [ 230s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/build/win32/vs10' [ 230s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/build/win32' [ 230s] make[4]: Nothing to be done for `all-am'. [ 230s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/build/win32' [ 230s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/build/win32' [ 230s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/build' [ 230s] make[3]: Nothing to be done for `all-am'. [ 230s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/build' [ 230s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/build' [ 230s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0' [ 230s] make[2]: Nothing to be done for `all-am'. [ 230s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0' [ 230s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0' [ 230s] + exit 0 [ 230s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.Nm9y9D [ 230s] + umask 022 [ 230s] + cd /home/abuild/rpmbuild/BUILD [ 230s] + cd atk-2.12.0 [ 230s] + LANG=C [ 230s] + export LANG [ 230s] + unset DISPLAY [ 230s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/atk-2.12.0-1.1.arm [ 230s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/atk-2.12.0-1.1.arm [ 230s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/atk-2.12.0-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/atk-2.12.0-1.1.arm install [ 230s] Making install in atk [ 230s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/atk' [ 230s] /usr/bin/make install-am [ 230s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/atk' [ 230s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/atk' [ 230s] test -z "/usr/lib" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/atk-2.12.0-1.1.arm/usr/lib" [ 230s] /bin/sh ../libtool --mode=install /usr/bin/install -c libatk-1.0.la '/home/abuild/rpmbuild/BUILDROOT/atk-2.12.0-1.1.arm/usr/lib' [ 230s] libtool: install: /usr/bin/install -c .libs/libatk-1.0.so.0.21209.1 /home/abuild/rpmbuild/BUILDROOT/atk-2.12.0-1.1.arm/usr/lib/libatk-1.0.so.0.21209.1 [ 230s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/atk-2.12.0-1.1.arm/usr/lib && { ln -s -f libatk-1.0.so.0.21209.1 libatk-1.0.so.0 || { rm -f libatk-1.0.so.0 && ln -s libatk-1.0.so.0.21209.1 libatk-1.0.so.0; }; }) [ 230s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/atk-2.12.0-1.1.arm/usr/lib && { ln -s -f libatk-1.0.so.0.21209.1 libatk-1.0.so || { rm -f libatk-1.0.so && ln -s libatk-1.0.so.0.21209.1 libatk-1.0.so; }; }) [ 230s] libtool: install: /usr/bin/install -c .libs/libatk-1.0.lai /home/abuild/rpmbuild/BUILDROOT/atk-2.12.0-1.1.arm/usr/lib/libatk-1.0.la [ 230s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 230s] test -z "/usr/include/atk-1.0/atk" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/atk-2.12.0-1.1.arm/usr/include/atk-1.0/atk" [ 230s] /usr/bin/install -c -m 644 atk.h atkaction.h atkcomponent.h atkdocument.h atkeditabletext.h atkgobjectaccessible.h atkhyperlink.h atkhyperlinkimpl.h atkhypertext.h atknoopobject.h atknoopobjectfactory.h atkobject.h atkobjectfactory.h atkplug.h atkimage.h atkrange.h atkregistry.h atkrelation.h atkrelationtype.h atkrelationset.h atkselection.h atksocket.h atkstate.h atkstateset.h atkstreamablecontent.h atktable.h atktablecell.h atktext.h atkutil.h atkmisc.h atkvalue.h atkwindow.h ../atk/atkversion.h atk-enum-types.h '/home/abuild/rpmbuild/BUILDROOT/atk-2.12.0-1.1.arm/usr/include/atk-1.0/atk' [ 230s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/atk' [ 230s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/atk' [ 230s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/atk' [ 230s] Making install in tests [ 230s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/tests' [ 230s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/tests' [ 230s] make[2]: Nothing to be done for `install-exec-am'. [ 230s] make[2]: Nothing to be done for `install-data-am'. [ 230s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/tests' [ 230s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/tests' [ 230s] Making install in docs [ 230s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/docs' [ 230s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/docs' [ 230s] make[2]: Nothing to be done for `install-exec-am'. [ 230s] make[2]: Nothing to be done for `install-data-am'. [ 230s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/docs' [ 230s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/docs' [ 230s] Making install in build [ 230s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/build' [ 230s] Making install in win32 [ 230s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/build/win32' [ 230s] Making install in vs9 [ 230s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/build/win32/vs9' [ 230s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/build/win32/vs9' [ 230s] make[4]: Nothing to be done for `install-exec-am'. [ 230s] make[4]: Nothing to be done for `install-data-am'. [ 230s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/build/win32/vs9' [ 230s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/build/win32/vs9' [ 230s] Making install in vs10 [ 230s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/build/win32/vs10' [ 230s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/build/win32/vs10' [ 230s] make[4]: Nothing to be done for `install-exec-am'. [ 230s] make[4]: Nothing to be done for `install-data-am'. [ 230s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/build/win32/vs10' [ 230s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/build/win32/vs10' [ 230s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/build/win32' [ 230s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/build/win32' [ 230s] make[4]: Nothing to be done for `install-exec-am'. [ 230s] make[4]: Nothing to be done for `install-data-am'. [ 230s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/build/win32' [ 230s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/build/win32' [ 230s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/build/win32' [ 230s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/build' [ 230s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/build' [ 230s] make[3]: Nothing to be done for `install-exec-am'. [ 230s] make[3]: Nothing to be done for `install-data-am'. [ 230s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/build' [ 230s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/build' [ 230s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0/build' [ 230s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0' [ 230s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0' [ 230s] make[2]: Nothing to be done for `install-exec-am'. [ 230s] test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/atk-2.12.0-1.1.arm/usr/lib/pkgconfig" [ 230s] /usr/bin/install -c -m 644 atk.pc '/home/abuild/rpmbuild/BUILDROOT/atk-2.12.0-1.1.arm/usr/lib/pkgconfig' [ 230s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0' [ 230s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/atk-2.12.0' [ 230s] + rm -f /home/abuild/rpmbuild/BUILDROOT/atk-2.12.0-1.1.arm/usr/share/info/dir [ 230s] + find /home/abuild/rpmbuild/BUILDROOT/atk-2.12.0-1.1.arm -regex '.*\.la$' [ 230s] + xargs rm -f -- [ 230s] + find /home/abuild/rpmbuild/BUILDROOT/atk-2.12.0-1.1.arm -regex '.*\.a$' [ 230s] + xargs rm -f -- [ 230s] + _target= [ 230s] + _symlinks=0 [ 230s] + fdupes -q -n -r /home/abuild/rpmbuild/BUILDROOT/atk-2.12.0-1.1.arm [ 230s] + read _file [ 230s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/atk-2.12.0-1.1.arm/usr/share/license [ 230s] + cp -f COPYING /home/abuild/rpmbuild/BUILDROOT/atk-2.12.0-1.1.arm/usr/share/license/atk [ 230s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/atk-2.12.0 [ 230s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/atk-2.12.0-1.1.arm/usr/lib/libatk-1.0.so.0.21209.1 [ 231s] symlinked /usr/lib/debug/usr/lib/libatk-1.0.so.0.21209.1.debug to /usr/lib/debug/usr/lib/libatk-1.0.so.0.debug [ 231s] symlinked /usr/lib/debug/usr/lib/libatk-1.0.so.0.21209.1.debug to /usr/lib/debug/usr/lib/libatk-1.0.so.debug [ 231s] 1138 blocks [ 231s] + /usr/lib/rpm/check-buildroot [ 231s] + /usr/lib/rpm//brp-compress [ 231s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 231s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 231s] + /usr/lib/rpm/brp-python-hardlink [ 231s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/atk-2.12.0-1.1.arm [ 232s] Processing files: atk-debuginfo-2.12.0-1.1.armv7l [ 232s] Processing files: atk-debugsource-2.12.0-1.1.armv7l [ 232s] Processing files: libatk-2.12.0-1.1.armv7l [ 232s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.NMoud3 [ 232s] + umask 022 [ 232s] + cd /home/abuild/rpmbuild/BUILD [ 232s] + cd atk-2.12.0 [ 232s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/atk-2.12.0-1.1.arm/usr/share/doc/libatk-2.12.0 [ 232s] + export DOCDIR [ 232s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/atk-2.12.0-1.1.arm/usr/share/doc/libatk-2.12.0 [ 232s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/atk-2.12.0-1.1.arm/usr/share/doc/libatk-2.12.0 [ 232s] + exit 0 [ 232s] Provides: atk = 2.12.0 libatk-1.0.so.0 [ 232s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 232s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 232s] Requires(post): /sbin/ldconfig [ 232s] Requires(postun): /sbin/ldconfig [ 232s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libglib-2.0.so.0 libgobject-2.0.so.0 rtld(GNU_HASH) [ 232s] Obsoletes: atk < 2.12.0 [ 232s] Processing files: atk-devel-2.12.0-1.1.armv7l [ 232s] Provides: pkgconfig(atk) = 2.12.0 [ 232s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 232s] Requires: /usr/bin/pkg-config libatk-1.0.so.0 pkgconfig(gobject-2.0) [ 232s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/atk-2.12.0-1.1.arm [ 232s] Wrote: /home/abuild/rpmbuild/SRPMS/atk-2.12.0-1.1.src.rpm [ 232s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/atk-debuginfo-2.12.0-1.1.armv7l.rpm [ 232s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/atk-debugsource-2.12.0-1.1.armv7l.rpm [ 232s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libatk-2.12.0-1.1.armv7l.rpm [ 232s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/atk-devel-2.12.0-1.1.armv7l.rpm [ 232s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.X0gtrz [ 232s] + umask 022 [ 232s] + cd /home/abuild/rpmbuild/BUILD [ 232s] + cd atk-2.12.0 [ 232s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/atk-2.12.0-1.1.arm [ 232s] + exit 0 [ 232s] ... checking for files with abuild user/group [ 232s] ... creating baselibs [ 232s] no targets for arch armv7l, nothing to do [ 232s] ... saving built statistics [ 232s] ... saving built packages [ 233s] /home/abuild/rpmbuild/RPMS/armv7l/atk-debuginfo-2.12.0-1.1.armv7l.rpm [ 233s] /home/abuild/rpmbuild/RPMS/armv7l/atk-debugsource-2.12.0-1.1.armv7l.rpm [ 233s] /home/abuild/rpmbuild/RPMS/armv7l/atk-devel-2.12.0-1.1.armv7l.rpm [ 233s] /home/abuild/rpmbuild/RPMS/armv7l/libatk-2.12.0-1.1.armv7l.rpm [ 233s] /home/abuild/rpmbuild/SRPMS/atk-2.12.0-1.1.src.rpm [ 233s] /home/abuild/rpmbuild/OTHER/_statistics [ 233s] [ 233s] w18 finished "build atk.spec" at Thu Oct 29 04:58:04 UTC 2015. [ 233s] [ 234s] /.build/build: line 368: 210 Killed background_monitor_process [ 236s] [ 222.724602] SysRq : Power Off [ 236s] [ 222.732324] Power down. [ 237s] build: extracting built packages... [ 237s] atk-debuginfo-2.12.0-1.1.armv7l.rpm [ 237s] atk-debugsource-2.12.0-1.1.armv7l.rpm [ 237s] atk-devel-2.12.0-1.1.armv7l.rpm [ 237s] libatk-2.12.0-1.1.armv7l.rpm [ 237s] atk-2.12.0-1.1.src.rpm [ 237s] _statistics Retried build at Mon May 30 15:06:16 2016 returned same result, skipped