[ 0s] Using BUILD_ROOT=/srv/build/root_8/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_8/root [ 0s] [ 0s] [ 0s] w30 started "build _service:gbs:buxton.spec" at Thu Oct 29 05:10:26 UTC 2015. [ 0s] [ 0s] Building buxton for project 'Tizen:2.4:Mobile' repository 'target-TM1' arch 'armv7l' srcmd5 '652ac16e13a252ffe25c34fdbd324fab' [ 0s] [ 0s] processing specfile /srv/build/root_8/.build-srcdir/_service:gbs:buxton.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_8/.build-srcdir/_service:gbs:buxton.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/8/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_8/.build.rpmlist /srv/build/root_8/.build-srcdir/_service:gbs:buxton.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 0s] [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: glibc -> glibc-common -> bash [ 0s] breaking dependency glibc-common -> bash [ 0s] cycle: glibc -> glibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: glibc -> glibc-common -> coreutils [ 0s] breaking dependency coreutils -> glibc [ 0s] cycle: glibc -> glibc-common -> coreutils -> libacl [ 0s] breaking dependency libacl -> glibc [ 0s] cycle: glibc -> glibc-common -> coreutils -> libacl -> libattr [ 0s] breaking dependency libattr -> glibc [ 0s] cycle: libgcc -> glibc -> glibc-common -> coreutils -> libacl -> libattr [ 0s] breaking dependency libacl -> libattr [ 0s] cycle: libgcc -> glibc -> glibc-common -> coreutils -> libacl [ 0s] breaking dependency glibc-common -> coreutils [ 0s] cycle: glibc -> glibc-common [ 0s] breaking dependency glibc -> glibc-common [ 0s] cycle: libgcc -> glibc [ 0s] breaking dependency libgcc -> glibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/52] preinstalling tizen-release... [ 0s] [2/52] preinstalling libgcc... [ 0s] [3/52] preinstalling setup... [ 0s] [4/52] preinstalling filesystem... [ 0s] [5/52] preinstalling glibc... [ 0s] [6/52] preinstalling libattr... [ 0s] [7/52] preinstalling libacl... [ 0s] [8/52] preinstalling bash... [ 0s] [9/52] preinstalling bzip2-libs... [ 0s] [10/52] preinstalling diffutils... [ 0s] [11/52] preinstalling elfutils-libelf... [ 0s] [12/52] preinstalling libcap... [ 0s] [13/52] preinstalling liblua... [ 0s] [14/52] preinstalling libstdc++... [ 1s] [15/52] preinstalling ncurses-libs... [ 1s] [16/52] preinstalling nspr... [ 1s] [17/52] preinstalling nss-softokn-freebl... [ 1s] [18/52] preinstalling popt... [ 1s] [19/52] preinstalling readline... [ 1s] [20/52] preinstalling sed... [ 1s] [21/52] preinstalling sqlite... [ 1s] [22/52] preinstalling xz-libs... [ 1s] [23/52] preinstalling zlib... [ 1s] [24/52] preinstalling glibc-common... [ 1s] [25/52] preinstalling tar... [ 1s] [26/52] preinstalling coreutils... [ 1s] [27/52] preinstalling qemu-linux-user-x86-arm... [ 1s] [28/52] preinstalling tizen-accelerator... [ 1s] [29/52] preinstalling libfile... [ 1s] [30/52] preinstalling bzip2... [ 1s] [31/52] preinstalling nss... [ 1s] [32/52] preinstalling bzip2-libs-x86-arm... [ 1s] [33/52] preinstalling elfutils-libelf-x86-arm... [ 1s] [34/52] preinstalling glibc-x86-arm... [ 1s] [35/52] preinstalling libacl-x86-arm... [ 1s] [36/52] preinstalling libattr-x86-arm... [ 1s] [37/52] preinstalling libcap-x86-arm... [ 1s] [38/52] preinstalling libgcc-x86-arm... [ 1s] [39/52] preinstalling liblua-x86-arm... [ 1s] [40/52] preinstalling ncurses-libs-x86-arm... [ 1s] [41/52] preinstalling nspr-x86-arm... [ 1s] [42/52] preinstalling nss-softokn-freebl-x86-arm... [ 1s] [43/52] preinstalling nss-x86-arm... [ 1s] [44/52] preinstalling popt-x86-arm... [ 1s] [45/52] preinstalling sqlite-x86-arm... [ 1s] [46/52] preinstalling xz-libs-x86-arm... [ 1s] [47/52] preinstalling zlib-x86-arm... [ 1s] [48/52] preinstalling rpm-libs... [ 1s] [49/52] preinstalling bash-x86-arm... [ 1s] [50/52] preinstalling rpm-libs-x86-arm... [ 1s] [51/52] preinstalling rpm... [ 1s] [52/52] preinstalling rpm-x86-arm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 2s] copying packages... [ 3s] reordering...cycle: bash -> glibc -> glibc-common [ 3s] breaking dependency glibc-common -> bash [ 3s] cycle: bash -> glibc -> glibc-common -> coreutils [ 3s] breaking dependency glibc-common -> coreutils [ 3s] cycle: glibc -> glibc-common -> findutils [ 3s] breaking dependency glibc-common -> findutils [ 3s] cycle: glibc -> glibc-common [ 3s] breaking dependency glibc-common -> glibc [ 3s] cycle: glibc -> glibc-common -> grep [ 3s] breaking dependency grep -> glibc [ 3s] cycle: glibc -> glibc-common -> grep -> libgcc [ 3s] breaking dependency grep -> libgcc [ 3s] cycle: glibc -> glibc-common -> grep -> libpcre [ 3s] breaking dependency libpcre -> glibc [ 3s] cycle: glibc -> glibc-common -> grep -> libpcre -> libgcc [ 3s] breaking dependency libpcre -> libgcc [ 3s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++ [ 3s] breaking dependency libstdc++ -> glibc [ 3s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 3s] breaking dependency glibc -> glibc-common [ 3s] cycle: glibc -> libgcc [ 3s] breaking dependency libgcc -> glibc [ 3s] cycle: filesystem -> setup [ 3s] breaking dependency setup -> filesystem [ 3s] cycle: ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses [ 3s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses-base [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl -> perl-libs [ 3s] cycle: perl -> perl-IO-Compress-Zlib [ 3s] breaking dependency perl -> perl-IO-Compress-Zlib [ 3s] cycle: perl -> perl-IO-Compress-Base [ 3s] breaking dependency perl -> perl-IO-Compress-Base [ 3s] cycle: perl -> perl-Module-Pluggable [ 3s] breaking dependency perl -> perl-Module-Pluggable [ 3s] cycle: perl -> perl-Pod-Simple [ 3s] breaking dependency perl -> perl-Pod-Simple [ 3s] cycle: dbus -> dbus-libs [ 3s] breaking dependency dbus -> dbus-libs [ 3s] cycle: nss -> nss-sysinit [ 3s] breaking dependency nss -> nss-sysinit [ 3s] cycle: rpm-libs -> rpm [ 3s] breaking dependency rpm-libs -> rpm [ 3s] done [ 5s] booting kvm ... [ 5s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 8000 -drive file=/srv/build/root_8/root,if=virtio,cache=none -drive file=/srv/build/root_8/root,if=ide,index=0,cache=none -drive file=/srv/build/root_8/swap,if=virtio,cache=none -smp 4 [ 7s] doing fast boot [ 7s] Creating device nodes with udev [ 8s] Waiting for device /dev/vda to appear: ok [ 8s] fsck from util-linux 2.21.2 [ 8s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 8s] /dev/vda: clean, 4710/2392064 files, 225575/9568256 blocks [ 8s] fsck succeeded. Mounting root device read-write. [ 8s] Mounting root /dev/vda [ 8s] mount -o rw -t ext4 /dev/vda /root [ 9s] replacing /etc/mtab with symlink to /proc/self/mounts [ 9s] /.build/qemu-reg: line 9: interpreter '/usr/bin/qemu-armeb-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 10: interpreter '/usr/bin/qemu-ppc-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 11: interpreter '/usr/bin/qemu-mips-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 12: interpreter '/usr/bin/qemu-mipsel-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 18: interpreter '/usr/bin/qemu-sh4-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 19: interpreter '/usr/bin/qemu-sh4eb-binfmt' not found, ignoring [ 9s] 2nd stage started in virtual machine [ 9s] machine type: armv7l [ 9s] swapon on /dev/vdb [ 9s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 9s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 10s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 10s] logging output to //.build.log... [ 10s] processing specfile /.build-srcdir/_service:gbs:buxton.spec ... [ 10s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:buxton.spec build rpmlint-Factory ... [ 10s] running rpm-x86-arm postinstall script [ 11s] running rpm-libs-x86-arm postinstall script [ 11s] running tizen-accelerator postinstall script [ 11s] running glibc-x86-arm postinstall script [ 11s] running bash-x86-arm postinstall script [ 11s] initializing rpm db... [ 19s] [1/185] cumulate cross-armv7l-platformfile-0.0.1-1.1 [ 19s] [2/185] cumulate kernel-headers-3.4.91-1.1 [ 19s] [3/185] cumulate libX11-common-1.6.2-1.1 [ 19s] [4/185] cumulate tizen-release-2.2.0-1.1 [ 19s] [5/185] cumulate tzdata-2014j-1.1 [ 19s] [6/185] cumulate libgcc-4.9.2-2015.02.1.11 [ 20s] [7/185] cumulate setup-0.2-1.1 [ 20s] [8/185] cumulate filesystem-0.1-1.1 [ 20s] [9/185] cumulate glibc-2.20-2014.11.1.10 [ 20s] [10/185] cumulate libstdc++-4.9.2-2015.02.1.11 [ 20s] [11/185] cumulate libatomic-4.9.2-2015.02.1.11 [ 20s] [12/185] cumulate libgomp-4.9.2-2015.02.1.11 [ 20s] [13/185] cumulate openssl-1.0.1p-1.5 [ 20s] [14/185] cumulate smack-1.0+s14-1.8 [ 21s] [15/185] cumulate bash-4.1-1.6 [ 21s] [16/185] cumulate bzip2-libs-1.0.5-1.8 [ 21s] [17/185] cumulate check-0.9.8-1.1 [ 21s] [18/185] cumulate cpio-2.8-1.6 [ 21s] [19/185] cumulate db4-4.8.30-1.8 [ 21s] [20/185] cumulate diffutils-3.0-1.6 [ 21s] [21/185] cumulate e2fsprogs-libs-1.41.9-1.4 [ 21s] [22/185] cumulate elfutils-libelf-0.152-1.12 [ 21s] [23/185] cumulate expat-2.0.1-1.8 [ 21s] [24/185] cumulate fdupes-1.40-1.5 [ 21s] [25/185] cumulate findutils-4.2.31-1.5 [ 22s] [26/185] cumulate gdbm-1.8.3-1.12 [ 22s] [27/185] cumulate libXau-1.0.8-1.1 [ 22s] [28/185] cumulate libattr-2.4.44-1.8 [ 22s] [29/185] cumulate libitm-4.9.2-2015.02.1.11 [ 22s] [30/185] cumulate liblua-5.1.4-1.6 [ 22s] [31/185] cumulate libuuid-2.20.2-1.4 [ 22s] [32/185] cumulate m4-1.4.14-1.5 [ 22s] [33/185] cumulate net-tools-1.60-2.6 [ 22s] [34/185] cumulate nspr-4.9-1.9 [ 22s] [35/185] cumulate nss-softokn-freebl-3.12.9-1.17 [ 23s] [36/185] cumulate patch-2.6-1.6 [ 23s] [37/185] cumulate pkg-config-0.25-2.6 [ 23s] [38/185] cumulate popt-1.16-1.8 [ 23s] [39/185] cumulate readline-5.2-1.6 [ 23s] [40/185] cumulate ruby-1.9.2-1.6 [ 23s] [41/185] cumulate sed-4.1.5-1.5 [ 23s] [42/185] cumulate sqlite-3.8.10.2-1.8 [ 23s] [43/185] cumulate xz-libs-5.0.3-1.8 [ 23s] [44/185] cumulate zlib-1.2.8-1.8 [ 23s] [45/185] cumulate libasan-4.9.2-2015.02.1.11 [ 23s] [46/185] cumulate libpcre-7.7-1.25 [ 23s] [47/185] cumulate libubsan-4.9.2-2015.02.1.11 [ 24s] [48/185] cumulate patchelf-0.5.svn20809-1.5 [ 24s] [49/185] cumulate ncurses-libs-5.7-1.8 [ 24s] [50/185] cumulate build-compare-2009.10.14-1.6 [ 24s] [51/185] cumulate gdbm-devel-1.8.3-1.12 [ 24s] [52/185] cumulate libattr-devel-2.4.44-1.8 [ 24s] [53/185] cumulate qemu-linux-user-x86-arm-2.2.0-4.1.1 [ 24s] [54/185] cumulate cpp-4.9.2-2015.02.1.11 [ 24s] [55/185] cumulate glibc-headers-2.20-2014.11.1.10 [ 25s] [56/185] cumulate libcap-2.21-1.6 [ 25s] [57/185] cumulate unzip-6.0-1.12 [ 25s] [58/185] cumulate grep-2.5.1a-1.5 [ 25s] [59/185] cumulate libacl-2.2.49-1.5 [ 25s] [60/185] cumulate libfile-5.04-1.7 [ 25s] [61/185] cumulate libpython-2.7.1-1.5 [ 25s] [62/185] cumulate libxcb-1.10.0-1.1 [ 25s] [63/185] cumulate libxml2-2.9.2-1.3 [ 25s] [64/185] cumulate make-3.82-154.1.6 [ 25s] [65/185] cumulate ncurses-5.7-1.8 [ 25s] [66/185] cumulate pcre-7.7-1.25 [ 25s] [67/185] cumulate psmisc-22.20-1.6 [ 26s] [68/185] cumulate binutils-2.25.0-2015.01.1.8 [ 26s] [69/185] cumulate bzip2-1.0.5-1.8 [ 26s] [70/185] cumulate kmod-libs-15-1.1 [ 26s] [71/185] cumulate libblkid-2.20.2-1.4 [ 26s] [72/185] cumulate xz-5.0.3-1.8 [ 26s] [73/185] cumulate elfutils-libs-0.152-1.12 [ 26s] [74/185] cumulate nss-3.12.9-1.17 [ 27s] [75/185] cumulate perl-5.12.1-1.25 [ 27s] [76/185] cumulate ncurses-base-5.7-1.8 [ 27s] [77/185] cumulate perl-HTML-Tagset-3.20-1.1 [ 27s] [78/185] cumulate perl-IO-Compress-Base-2.008-1.25 [ 27s] [79/185] cumulate perl-Module-Pluggable-3.60-1.25 [ 27s] [80/185] cumulate perl-Pod-Escapes-1.04-1.25 [ 27s] [81/185] cumulate perl-TimeDate-1.20-1.1 [ 28s] [82/185] cumulate perl-URI-1.54-1.1 [ 28s] [83/185] cumulate glibc-devel-2.20-2014.11.1.10 [ 28s] [84/185] cumulate file-5.04-1.7 [ 28s] [85/185] cumulate libxslt-1.1.28-1.2 [ 28s] [86/185] cumulate perl-Compress-Raw-Zlib-2.008-1.25 [ 28s] [87/185] cumulate perl-libs-5.12.1-1.25 [ 28s] [88/185] cumulate tar-1.17-1.6 [ 28s] [89/185] cumulate coreutils-6.9-1.6 [ 28s] [90/185] cumulate libX11-1.6.2-1.1 [ 28s] [91/185] cumulate libmount-2.20.2-1.4 [ 28s] [92/185] cumulate xz-lzma-compat-5.0.3-1.8 [ 29s] [93/185] cumulate elfutils-0.152-1.12 [ 29s] [94/185] cumulate nss-sysinit-3.12.9-1.17 [ 29s] [95/185] cumulate python-base-2.7.1-1.5 [ 29s] [96/185] cumulate glibc-common-2.20-2014.11.1.10 [ 29s] [97/185] cumulate libarchive-2.8.3-1.2 [ 29s] [98/185] cumulate rpm-libs-4.9.1-4.3.1.10 [ 29s] [99/185] cumulate libstdc++-devel-4.9.2-2015.02.1.11 [ 29s] [100/185] cumulate perl-Pod-Simple-3.07-1.25 [ 30s] [101/185] cumulate tizen-accelerator-1.0.1-1.1 [ 30s] [102/185] cumulate check-devel-0.9.8-1.1 [ 30s] [103/185] cumulate perl-IO-Compress-Zlib-2.008-1.25 [ 30s] [104/185] cumulate gawk-3.1.5-1.6 [ 30s] [105/185] cumulate gzip-1.3.12-1.6 [ 30s] [106/185] cumulate pam-1.1.5-1.5 [ 31s] [107/185] cumulate perl-HTML-Parser-3.65-1.5 [ 31s] [108/185] cumulate python-xml-2.7.1-1.5 [ 31s] [109/185] cumulate autoconf-2.68-1.1 [ 31s] [110/185] cumulate build-2011.01.10a-1.1 [ 31s] [111/185] installing rpm-4.9.1-4.3.1.10 [ 33s] [112/185] cumulate python-lxml-2.2.3-1.2 [ 33s] [113/185] cumulate dbus-1.8.16-1.1 [ 33s] [114/185] cumulate util-linux-2.20.2-1.4 [ 33s] [115/185] cumulate cmake-2.8.5-1.1.2 [ 33s] [116/185] cumulate python-2.7.1-1.3 [ 33s] [117/185] cumulate gcc-4.9.2-2015.02.1.11 [ 33s] [118/185] cumulate automake-1.11.1-1.1 [ 33s] [119/185] cumulate bzip2-libs-x86-arm-1.0.5-9.1.4 [ 33s] [120/185] cumulate dbus-libs-1.8.16-1.1 [ 33s] [121/185] cumulate elfutils-libelf-x86-arm-0.152-9.1.4 [ 33s] [122/185] cumulate elfutils-libs-x86-arm-0.152-9.1.4 [ 33s] [123/185] cumulate expat-x86-arm-2.0.1-1.4 [ 33s] [124/185] cumulate glibc-x86-arm-2.20-9.1.5 [ 33s] [125/185] cumulate libacl-x86-arm-2.2.49-9.1.4 [ 34s] [126/185] cumulate libarchive-x86-arm-2.8.3-1.3 [ 34s] [127/185] cumulate libattr-x86-arm-2.4.44-9.1.4 [ 34s] [128/185] cumulate libcap-x86-arm-2.21-9.1.4 [ 34s] [129/185] cumulate libfile-x86-arm-5.04-9.1.4 [ 34s] [130/185] cumulate libgcc-x86-arm-4.9.2-9.1.4 [ 34s] [131/185] cumulate liblua-x86-arm-5.1.4-9.1.3 [ 34s] [132/185] cumulate libpython-x86-arm-2.7.1-9.1.3 [ 34s] [133/185] cumulate libstdc++-x86-arm-4.9.2-9.1.4 [ 34s] [134/185] cumulate libxml2-x86-arm-2.9.2-9.1.3 [ 34s] [135/185] cumulate libxslt-x86-arm-1.1.28-9.1.3 [ 34s] [136/185] cumulate ncurses-libs-x86-arm-5.7-9.1.3 [ 34s] [137/185] cumulate nspr-x86-arm-4.9-9.1.5 [ 34s] [138/185] cumulate nss-softokn-freebl-x86-arm-3.12.9-9.1.5 [ 34s] [139/185] cumulate nss-x86-arm-3.12.9-9.1.5 [ 34s] [140/185] cumulate openssl-x86-arm-1.0.1p-9.1.3 [ 34s] [141/185] cumulate perl-libs-x86-arm-5.12.1-9.1.5 [ 34s] [142/185] cumulate popt-x86-arm-1.16-9.1.4 [ 34s] [143/185] cumulate python-lxml-x86-arm-2.2.3-9.1.3 [ 34s] [144/185] cumulate python-x86-arm-2.7.1-9.1.3 [ 34s] [145/185] cumulate python-xml-x86-arm-2.7.1-9.1.3 [ 34s] [146/185] cumulate rpm-libs-x86-arm-4.9.1-9.1.4 [ 34s] [147/185] cumulate sqlite-x86-arm-3.8.10.2-9.1.3 [ 34s] [148/185] cumulate xz-libs-x86-arm-5.0.3-9.1.4 [ 34s] [149/185] cumulate zlib-x86-arm-1.2.8-9.1.4 [ 34s] [150/185] cumulate gcc-c++-4.9.2-2015.02.1.11 [ 34s] [151/185] cumulate perl-Compress-Zlib-2.008-1.25 [ 34s] [152/185] cumulate systemd-libs-216-1.1 [ 34s] [153/185] cumulate rpm-build-4.9.1-4.3.1.10 [ 34s] [154/185] cumulate bash-x86-arm-4.1-9.1.4 [ 34s] [155/185] cumulate diffutils-x86-arm-3.0-9.1.4 [ 34s] [156/185] cumulate fdupes-x86-arm-1.40-9.1.4 [ 34s] [157/185] cumulate findutils-x86-arm-4.2.31-9.1.4 [ 34s] [158/185] cumulate gawk-x86-arm-3.1.5-9.1.3 [ 34s] [159/185] cumulate gzip-x86-arm-1.3.12-9.1.4 [ 34s] [160/185] cumulate libtool-2.2.6b-1.8 [ 34s] [161/185] cumulate m4-x86-arm-1.4.14-9.1.4 [ 34s] [162/185] cumulate make-x86-arm-3.82-9.1.3 [ 34s] [163/185] cumulate patch-x86-arm-2.6-9.1.4 [ 34s] [164/185] cumulate perl-libwww-perl-5.836-1.1 [ 34s] [165/185] cumulate pkg-config-x86-arm-0.25-9.1.4 [ 34s] [166/185] cumulate ruby-x86-arm-1.9.2-9.1.4 [ 34s] [167/185] cumulate sed-x86-arm-4.1.5-9.1.4 [ 34s] [168/185] cumulate bzip2-x86-arm-1.0.5-1.4 [ 35s] [169/185] cumulate perl-x86-arm-5.12.1-9.1.5 [ 35s] [170/185] cumulate python-base-x86-arm-2.7.1-9.1.3 [ 35s] [171/185] cumulate coreutils-x86-arm-6.9-9.1.4 [ 35s] [172/185] cumulate cross-armv7l-gcc-accel-x86-armv7l-4.9.2-2015.02.1.6 [ 35s] [173/185] cumulate file-x86-arm-5.04-9.1.4 [ 35s] [174/185] cumulate tar-x86-arm-1.17-9.1.4 [ 35s] [175/185] cumulate elfutils-x86-arm-0.152-9.1.4 [ 35s] [176/185] cumulate systemd-216-1.1 [ 35s] [177/185] cumulate cmake-x86-arm-2.8.5-1.3 [ 35s] [178/185] cumulate rpm-x86-arm-4.9.1-9.1.4 [ 35s] [179/185] cumulate rpm-build-x86-arm-4.9.1-9.1.4 [ 35s] [180/185] cumulate systemd-devel-216-1.1 [ 35s] [181/185] cumulate perl-HTML-Parser-x86-arm-3.65-9.1.3 [ 35s] [182/185] cumulate cross-armv7l-binutils-accel-x86-armv7l-2.25.0-2015.01.1.3 [ 35s] [183/185] cumulate perl-XML-Parser-2.36-1.6 [ 35s] [184/185] cumulate perl-XML-Parser-x86-arm-2.36-9.1.3 [ 35s] [185/185] now installing cumulated packages [ 35s] Preparing... ################################################## [ 35s] setup ################################################## [ 35s] filesystem ################################################## [ 35s] tzdata ################################################## [ 36s] libX11-common ################################################## [ 36s] tizen-release ################################################## [ 36s] kernel-headers ################################################## [ 36s] cross-armv7l-platformfile ################################################## [ 36s] bash ################################################## [ 36s] findutils ################################################## [ 36s] grep ################################################## [ 36s] coreutils ################################################## [ 36s] glibc-common ################################################## [ 36s] libgcc ################################################## [ 36s] /sbin/ldconfig: relative path `1' used to build cache [ 36s] warning: %post(libgcc-4.9.2-2015.02.1.11.armv7l) scriptlet failed, exit status 1 [ 36s] glibc ################################################## [ 36s] libstdc++ ################################################## [ 36s] libattr ################################################## [ 36s] libacl ################################################## [ 36s] libpcre ################################################## [ 36s] tizen-accelerator ################################################## [ 37s] glibc-x86-arm ################################################## [ 37s] libattr-x86-arm ################################################## [ 37s] libacl-x86-arm ################################################## [ 37s] libgcc-x86-arm ################################################## [ 37s] libstdc++-x86-arm ################################################## [ 38s] glibc-headers ################################################## [ 38s] glibc-devel ################################################## [ 38s] libstdc++-devel ################################################## [ 38s] coreutils-x86-arm ################################################## [ 41s] bash-x86-arm ################################################## [ 41s] findutils-x86-arm ################################################## [ 41s] libattr-devel ################################################## [ 41s] build-compare ################################################## [ 41s] qemu-linux-user-x86-arm ################################################## [ 41s] zlib ################################################## [ 41s] xz-libs ################################################## [ 41s] zlib-x86-arm ################################################## [ 41s] bzip2-libs ################################################## [ 41s] bzip2-libs-x86-arm ################################################## [ 41s] elfutils-libelf ################################################## [ 41s] ncurses-libs ################################################## [ 41s] ncurses ################################################## [ 41s] ncurses-base ################################################## [ 41s] libpython ################################################## [ 42s] python-base ################################################## [ 42s] libxml2 ################################################## [ 42s] binutils ################################################## [ 42s] libcap ################################################## [ 42s] expat ################################################## [ 42s] elfutils-libelf-x86-arm ################################################## [ 42s] xz-libs-x86-arm ################################################## [ 42s] libfile ################################################## [ 42s] openssl ################################################## [ 42s] libuuid ################################################## [ 42s] libblkid ################################################## [ 42s] nspr ################################################## [ 42s] pkg-config ################################################## [ 42s] popt ################################################## [ 42s] sed ################################################## [ 42s] sqlite ################################################## [ 42s] popt-x86-arm ################################################## [ 42s] nspr-x86-arm ################################################## [ 42s] libfile-x86-arm ################################################## [ 42s] libcap-x86-arm ################################################## [ 42s] libarchive ################################################## [ 42s] file ################################################## [ 42s] libxslt ################################################## [ 42s] elfutils-libs ################################################## [ 42s] elfutils ################################################## [ 42s] bzip2 ################################################## [ 42s] xz ################################################## [ 42s] tar ################################################## [ 42s] diffutils ################################################## [ 42s] gdbm ################################################## [ 42s] perl-Pod-Escapes ################################################## [ 42s] perl-Compress-Raw-Zlib ################################################## [ 42s] perl-IO-Compress-Base ################################################## [ 42s] perl-Module-Pluggable ################################################## [ 42s] perl-Pod-Simple ################################################## [ 42s] perl-IO-Compress-Zlib ################################################## [ 42s] perl-libs ################################################## [ 44s] perl ################################################## [ 44s] perl-URI ################################################## [ 44s] liblua ################################################## [ 44s] liblua-x86-arm ################################################## [ 44s] m4 ################################################## [ 44s] autoconf ################################################## [ 44s] nss-softokn-freebl ################################################## [ 44s] nss ################################################## [ 44s] nss-sysinit ################################################## [ 44s] nss-x86-arm ################################################## [ 44s] rpm-libs ################################################## [ 44s] rpm-libs-x86-arm ################################################## [ 44s] patch ################################################## [ 44s] gawk ################################################## [ 44s] gzip ################################################## [ 44s] pam ################################################## [ 44s] automake ################################################## [ 44s] perl-HTML-Tagset ################################################## [ 44s] perl-TimeDate ################################################## [ 44s] perl-Compress-Zlib ################################################## [ 44s] perl-libs-x86-arm ################################################## [ 45s] perl-x86-arm ################################################## [ 46s] elfutils-libs-x86-arm ################################################## [ 46s] libarchive-x86-arm ################################################## [ 46s] openssl-x86-arm ################################################## [ 46s] libxml2-x86-arm ################################################## [ 46s] libpython-x86-arm ################################################## [ 46s] perl-HTML-Parser ################################################## [ 46s] systemd-libs ################################################## [ 46s] perl-libwww-perl ################################################## [ 46s] perl-XML-Parser ################################################## [ 46s] xz-lzma-compat ################################################## [ 46s] python-lxml ################################################## [ 46s] cmake ################################################## [ 46s] libmount ################################################## [ 46s] python-xml ################################################## [ 46s] kmod-libs ################################################## [ 46s] cpp ################################################## [ 46s] libasan ################################################## [ 46s] libubsan ################################################## [ 46s] libatomic ################################################## [ 46s] libgomp ################################################## [ 46s] smack ################################################## [ 46s] check ################################################## [ 46s] cpio ################################################## [ 47s] db4 ################################################## [ 47s] fdupes ################################################## [ 47s] libXau ################################################## [ 47s] libxcb ################################################## [ 47s] libX11 ################################################## [ 47s] dbus-libs ################################################## [ 47s] dbus ################################################## [ 47s] systemd ################################################## [ 47s] libitm ################################################## [ 47s] gcc ################################################## [ 48s] gcc-c++ ################################################## [ 49s] cross-armv7l-gcc-accel-x86-a################################################## [ 49s] "GCCVER: 4.9 GCCVER_NEW: 4.9 " [ 49s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 49s] readline ################################################## [ 49s] python ################################################## [ 49s] ruby ################################################## [ 49s] unzip ################################################## [ 49s] rpm-build ################################################## [ 49s] make ################################################## [ 49s] make-x86-arm ################################################## [ 49s] rpm-build-x86-arm ################################################## [ 50s] ruby-x86-arm ################################################## [ 50s] python-x86-arm ################################################## [ 50s] cross-armv7l-binutils-accel-################################################## [ 50s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/addr2line': File exists [ 50s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ar': File exists [ 50s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/as': File exists [ 50s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/c++filt': File exists [ 50s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/elfedit': File exists [ 50s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/gprof': File exists [ 50s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld': File exists [ 50s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld.bfd': File exists [ 50s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld.gold': File exists [ 50s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/nm': File exists [ 50s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/objcopy': File exists [ 50s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/objdump': File exists [ 50s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ranlib': File exists [ 51s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/readelf': File exists [ 51s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/size': File exists [ 51s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/strings': File exists [ 51s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/strip': File exists [ 51s] systemd-devel ################################################## [ 51s] fdupes-x86-arm ################################################## [ 51s] check-devel ################################################## [ 51s] python-xml-x86-arm ################################################## [ 51s] cmake-x86-arm ################################################## [ 51s] python-lxml-x86-arm ################################################## [ 51s] perl-XML-Parser-x86-arm ################################################## [ 51s] perl-HTML-Parser-x86-arm ################################################## [ 51s] python-base-x86-arm ################################################## [ 52s] elfutils-x86-arm ################################################## [ 52s] build ################################################## [ 52s] libtool ################################################## [ 52s] gzip-x86-arm ################################################## [ 53s] gawk-x86-arm ################################################## [ 53s] patch-x86-arm ################################################## [ 53s] rpm-x86-arm ################################################## [ 53s] /bin/rpm.orig-arm already present - skipping. [ 53s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 53s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 53s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 53s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 53s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 53s] nss-softokn-freebl-x86-arm ################################################## [ 53s] m4-x86-arm ################################################## [ 53s] gdbm-devel ################################################## [ 53s] diffutils-x86-arm ################################################## [ 53s] tar-x86-arm ################################################## [ 53s] bzip2-x86-arm ################################################## [ 53s] libxslt-x86-arm ################################################## [ 53s] mv: cannot stat `/usr/bin/xsltproc': No such file or directory [ 53s] file-x86-arm ################################################## [ 53s] sqlite-x86-arm ################################################## [ 53s] sed-x86-arm ################################################## [ 53s] pkg-config-x86-arm ################################################## [ 53s] expat-x86-arm ################################################## [ 53s] ncurses-libs-x86-arm ################################################## [ 53s] util-linux ################################################## [ 53s] psmisc ################################################## [ 53s] pcre ################################################## [ 53s] patchelf ################################################## [ 53s] e2fsprogs-libs ################################################## [ 53s] net-tools ################################################## [ 54s] removing nis flags from //etc/nsswitch.conf... [ 54s] now finalizing build dir... [ 55s] build target is armv7l-tizen-linux [ 55s] ----------------------------------------------------------------- [ 55s] I have the following modifications for buxton.spec: [ 55s] 4c4 [ 55s] < Release: 1 [ 55s] --- [ 55s] > Release: %{?release_prefix:%{release_prefix}.}1.1 [ 55s] ----------------------------------------------------------------- [ 55s] ----- building buxton.spec (user abuild) [ 55s] ----------------------------------------------------------------- [ 55s] ----------------------------------------------------------------- [ 55s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:2.4:Mobile/target-TM1/652ac16e13a252ffe25c34fdbd324fab-buxton' /home/abuild/rpmbuild/SOURCES/buxton.spec [ 55s] Building target platforms: armv7l-tizen-linux [ 55s] Building for target armv7l-tizen-linux [ 55s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.Iveoko [ 55s] + umask 022 [ 55s] + cd /home/abuild/rpmbuild/BUILD [ 55s] + cd /home/abuild/rpmbuild/BUILD [ 55s] + rm -rf buxton-2 [ 55s] + /usr/bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/buxton-2.tar.bz2 [ 55s] + /bin/tar -xf - [ 55s] + STATUS=0 [ 55s] + '[' 0 -ne 0 ']' [ 55s] + cd buxton-2 [ 55s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 55s] + exit 0 [ 55s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.FOBrAs [ 55s] + umask 022 [ 55s] + cd /home/abuild/rpmbuild/BUILD [ 55s] + cd buxton-2 [ 55s] + LANG=C [ 55s] + export LANG [ 55s] + unset DISPLAY [ 55s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 55s] + export CFLAGS [ 55s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 55s] + export CXXFLAGS [ 55s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 55s] + export FFLAGS [ 55s] + LD_AS_NEEDED=1 [ 55s] + export LD_AS_NEEDED [ 55s] + cp /home/abuild/rpmbuild/SOURCES/buxton.manifest . [ 55s] + ./autogen.sh --with-user=root --disable-manpages [ 58s] libtoolize: putting auxiliary files in `.'. [ 58s] libtoolize: linking file `./ltmain.sh' [ 58s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 58s] libtoolize: linking file `m4/libtool.m4' [ 58s] libtoolize: linking file `m4/ltoptions.m4' [ 58s] libtoolize: linking file `m4/ltsugar.m4' [ 58s] libtoolize: linking file `m4/ltversion.m4' [ 58s] libtoolize: linking file `m4/lt~obsolete.m4' [ 62s] configure.ac:16: installing `./compile' [ 62s] configure.ac:12: installing `./config.guess' [ 62s] configure.ac:12: installing `./config.sub' [ 62s] configure.ac:4: installing `./install-sh' [ 62s] configure.ac:4: installing `./missing' [ 62s] Makefile.am: installing `./depcomp' [ 62s] checking for a BSD-compatible install... /usr/bin/install -c [ 63s] checking whether build environment is sane... yes [ 63s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 63s] checking for gawk... gawk [ 63s] checking whether make sets $(MAKE)... yes [ 63s] checking build system type... armv7l-unknown-linux-gnueabi [ 63s] checking host system type... armv7l-unknown-linux-gnueabi [ 63s] checking for style of include used by make... GNU [ 63s] checking for gcc... gcc [ 63s] checking whether the C compiler works... yes [ 63s] checking for C compiler default output file name... a.out [ 63s] checking for suffix of executables... [ 63s] checking whether we are cross compiling... no [ 64s] checking for suffix of object files... o [ 64s] checking whether we are using the GNU C compiler... yes [ 64s] checking whether gcc accepts -g... yes [ 64s] checking for gcc option to accept ISO C89... none needed [ 64s] checking dependency style of gcc... gcc3 [ 64s] checking for a sed that does not truncate output... /bin/sed [ 64s] checking for grep that handles long lines and -e... /bin/grep [ 64s] checking for egrep... /bin/grep -E [ 64s] checking for fgrep... /bin/grep -F [ 64s] checking for ld used by gcc... /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld [ 64s] checking if the linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld) is GNU ld... yes [ 64s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 64s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 64s] checking whether ln -s works... yes [ 64s] checking the maximum length of command line arguments... 1572864 [ 64s] checking whether the shell understands some XSI constructs... yes [ 64s] checking whether the shell understands "+="... yes [ 64s] checking for /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld option to reload object files... -r [ 64s] checking for objdump... objdump [ 64s] checking how to recognize dependent libraries... pass_all [ 64s] checking for ar... ar [ 64s] checking for strip... strip [ 64s] checking for ranlib... ranlib [ 64s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 64s] checking how to run the C preprocessor... gcc -E [ 64s] checking for ANSI C header files... yes [ 64s] checking for sys/types.h... yes [ 64s] checking for sys/stat.h... yes [ 64s] checking for stdlib.h... yes [ 64s] checking for string.h... yes [ 64s] checking for memory.h... yes [ 64s] checking for strings.h... yes [ 65s] checking for inttypes.h... yes [ 65s] checking for stdint.h... yes [ 65s] checking for unistd.h... yes [ 65s] checking for dlfcn.h... yes [ 65s] checking for objdir... .libs [ 65s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 65s] checking for gcc option to produce PIC... -fPIC -DPIC [ 65s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 65s] checking if gcc static flag -static works... no [ 65s] checking if gcc supports -c -o file.o... yes [ 65s] checking if gcc supports -c -o file.o... (cached) yes [ 65s] checking whether the gcc linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld) supports shared libraries... yes [ 65s] checking whether -lc should be explicitly linked in... no [ 65s] checking dynamic linker characteristics... GNU/Linux ld.so [ 65s] checking how to hardcode library paths into programs... immediate [ 65s] checking whether stripping libraries is possible... yes [ 65s] checking if libtool supports shared libraries... yes [ 65s] checking whether to build shared libraries... yes [ 65s] checking whether to build static libraries... no [ 65s] checking for gcc... (cached) gcc [ 65s] checking whether we are using the GNU C compiler... (cached) yes [ 65s] checking whether gcc accepts -g... (cached) yes [ 65s] checking for gcc option to accept ISO C89... (cached) none needed [ 65s] checking dependency style of gcc... (cached) gcc3 [ 65s] checking whether gcc and cc understand -c and -o together... yes [ 65s] checking for dlopen in -ldl... yes [ 65s] checking for gdbm_open in -lgdbm... yes [ 65s] checking for clock_gettime in -lrt... yes [ 65s] checking for sqrt in -lm... yes [ 65s] checking for inline... inline [ 65s] checking for int32_t... yes [ 66s] checking for int64_t... yes [ 66s] checking for pid_t... yes [ 66s] checking for size_t... yes [ 66s] checking for ssize_t... yes [ 66s] checking for uid_t in sys/types.h... yes [ 66s] checking for uint16_t... yes [ 66s] checking for uint32_t... yes [ 66s] checking for uint64_t... yes [ 66s] checking for uint8_t... yes [ 66s] checking vfork.h usability... no [ 66s] checking vfork.h presence... no [ 66s] checking for vfork.h... no [ 66s] checking for fork... yes [ 66s] checking for vfork... yes [ 66s] checking for working fork... yes [ 66s] checking for working vfork... (cached) yes [ 66s] checking for stdlib.h... (cached) yes [ 66s] checking for GNU libc compatible malloc... yes [ 66s] checking for stdlib.h... (cached) yes [ 66s] checking for GNU libc compatible realloc... yes [ 66s] checking for working strtod... yes [ 67s] checking for atexit... yes [ 67s] checking for memmove... yes [ 67s] checking for memset... yes [ 67s] checking for socket... yes [ 67s] checking for strchr... yes [ 67s] checking for strdup... yes [ 67s] checking for strndup... yes [ 67s] checking for strtol... yes [ 67s] checking for __secure_getenv... no [ 67s] checking for secure_getenv... yes [ 67s] checking whether preprocessor supports #pragma once... yes [ 67s] checking for pkg-config... /usr/bin/pkg-config [ 67s] checking pkg-config is at least version 0.9.0... yes [ 67s] checking for CHECK... yes [ 67s] checking for SYSTEMD... yes [ 67s] checking for working alloca.h... yes [ 67s] checking for alloca... yes [ 67s] checking for stdbool.h that conforms to C99... yes [ 67s] checking for _Bool... yes [ 67s] checking attr/xattr.h usability... yes [ 67s] checking attr/xattr.h presence... yes [ 67s] checking for attr/xattr.h... yes [ 67s] checking fcntl.h usability... yes [ 67s] checking fcntl.h presence... yes [ 67s] checking for fcntl.h... yes [ 67s] checking gdbm.h usability... yes [ 67s] checking gdbm.h presence... yes [ 67s] checking for gdbm.h... yes [ 67s] checking for inttypes.h... (cached) yes [ 68s] checking limits.h usability... yes [ 68s] checking limits.h presence... yes [ 68s] checking for limits.h... yes [ 68s] checking locale.h usability... yes [ 68s] checking locale.h presence... yes [ 68s] checking for locale.h... yes [ 68s] checking malloc.h usability... yes [ 68s] checking malloc.h presence... yes [ 68s] checking for malloc.h... yes [ 68s] checking stddef.h usability... yes [ 68s] checking stddef.h presence... yes [ 68s] checking for stddef.h... yes [ 68s] checking for stdint.h... (cached) yes [ 68s] checking for stdlib.h... (cached) yes [ 68s] checking for string.h... (cached) yes [ 68s] checking time.h usability... yes [ 68s] checking time.h presence... yes [ 68s] checking for time.h... yes [ 68s] checking math.h usability... yes [ 68s] checking math.h presence... yes [ 68s] checking for math.h... yes [ 68s] checking pthread.h usability... yes [ 68s] checking pthread.h presence... yes [ 68s] checking for pthread.h... yes [ 68s] checking sys/param.h usability... yes [ 68s] checking sys/param.h presence... yes [ 68s] checking for sys/param.h... yes [ 68s] checking sys/signalfd.h usability... yes [ 68s] checking sys/signalfd.h presence... yes [ 68s] checking for sys/signalfd.h... yes [ 68s] checking sys/socket.h usability... yes [ 68s] checking sys/socket.h presence... yes [ 68s] checking for sys/socket.h... yes [ 68s] checking for sys/stat.h... (cached) yes [ 68s] checking sys/time.h usability... yes [ 68s] checking sys/time.h presence... yes [ 68s] checking for sys/time.h... yes [ 68s] checking for unistd.h... (cached) yes [ 68s] checking linux/inotify.h usability... yes [ 68s] checking linux/inotify.h presence... yes [ 68s] checking for linux/inotify.h... yes [ 68s] checking for inotify_init... yes [ 68s] checking for INIPARSER... no [ 68s] configure: creating ./config.status [ 69s] config.status: creating Makefile [ 69s] config.status: creating data/buxton.service [ 69s] config.status: creating data/buxton.socket [ 69s] config.status: creating data/libbuxton.pc [ 69s] config.status: creating test/test-pass.ini [ 69s] config.status: creating test/test-fail.ini [ 69s] config.status: creating test/test.conf [ 69s] config.status: creating config.h [ 69s] config.status: executing depfiles commands [ 69s] config.status: executing libtool commands [ 69s] config.status: executing mkdir commands [ 69s] [ 69s] buxton 2 [ 69s] ======== [ 69s] [ 69s] prefix: /usr [ 69s] libdir: ${exec_prefix}/lib [ 69s] sysconfdir: /etc [ 69s] exec_prefix: ${prefix} [ 69s] bindir: ${exec_prefix}/bin [ 69s] sbindir: ${exec_prefix}/sbin [ 69s] datarootdir: ${prefix}/share [ 69s] mandir: ${datarootdir}/man [ 69s] modules: ${exec_prefix}/lib/buxton [ 69s] [ 69s] compiler: gcc [ 69s] cflags: -g -O0 [ 69s] ldflags: [ 69s] [ 69s] debug: no [ 69s] demos: no [ 69s] coverage: no [ 69s] manpages: no [ 69s] [ 69s] Making clean in . [ 69s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/buxton-2' [ 69s] rm -f buxtonctl [ 69s] rm -f check_buxton check_shared_lib check_buxtond check_daemon check_smack check_configurator [ 69s] test -z "libbuxton.la" || rm -f libbuxton.la [ 69s] rm -f "./so_locations" [ 69s] rm -rf .libs _libs [ 69s] rm -rf src/db/.libs src/db/_libs [ 69s] rm -rf src/libbuxton/.libs src/libbuxton/_libs [ 69s] rm -rf src/security/.libs src/security/_libs [ 69s] rm -rf src/shared/.libs src/shared/_libs [ 69s] test -z "libbuxton-shared.la" || rm -f libbuxton-shared.la [ 69s] rm -f "./so_locations" [ 69s] test -z "gdbm.la memory.la" || rm -f gdbm.la memory.la [ 69s] rm -f "./so_locations" [ 69s] rm -f "./so_locations" [ 69s] rm -f buxtond [ 69s] rm -f *.o [ 69s] rm -f demo/bxt_gtk_client-gtk_client.o [ 69s] rm -f demo/bxt_hello_create_group-hellocreategroup.o [ 69s] rm -f demo/bxt_hello_get-helloget.o [ 69s] rm -f demo/bxt_hello_notify-hellonotify.o [ 69s] rm -f demo/bxt_hello_notify_multi-notifytest.o [ 69s] rm -f demo/bxt_hello_remove_group-helloremovegroup.o [ 69s] rm -f demo/bxt_hello_set-helloset.o [ 69s] rm -f demo/bxt_hello_set_label-hellosetlabel.o [ 69s] rm -f demo/bxt_hello_unset-hellounset.o [ 69s] rm -f demo/timing.o [ 69s] rm -f src/cli/buxtonctl-client.o [ 69s] rm -f src/cli/buxtonctl-main.o [ 69s] rm -f src/core/buxtond-daemon.o [ 69s] rm -f src/core/buxtond-main.o [ 69s] rm -f src/core/check_buxtond-daemon.o [ 69s] rm -f src/core/check_buxtond-main.o [ 69s] rm -f src/core/check_daemon-daemon.o [ 69s] rm -f src/db/gdbm.o [ 69s] rm -f src/db/gdbm.lo [ 69s] rm -f src/db/memory.o [ 69s] rm -f src/db/memory.lo [ 69s] rm -f src/libbuxton/libbuxton_la-lbuxton.o [ 69s] rm -f src/libbuxton/libbuxton_la-lbuxton.lo [ 69s] rm -f src/security/smack.o [ 69s] rm -f src/security/smack.lo [ 69s] rm -f src/shared/backend.o [ 69s] rm -f src/shared/backend.lo [ 69s] rm -f src/shared/buxtonarray.o [ 69s] rm -f src/shared/buxtonarray.lo [ 69s] rm -f src/shared/buxtonlist.o [ 69s] rm -f src/shared/buxtonlist.lo [ 69s] rm -f src/shared/check_configurator-configurator.o [ 69s] rm -f src/shared/configurator.o [ 69s] rm -f src/shared/configurator.lo [ 69s] rm -f src/shared/dictionary.o [ 69s] rm -f src/shared/dictionary.lo [ 69s] rm -f src/shared/direct.o [ 69s] rm -f src/shared/direct.lo [ 69s] rm -f src/shared/hashmap.o [ 69s] rm -f src/shared/hashmap.lo [ 69s] rm -f src/shared/iniparser.o [ 69s] rm -f src/shared/iniparser.lo [ 69s] rm -f src/shared/log.o [ 69s] rm -f src/shared/log.lo [ 69s] rm -f src/shared/protocol.o [ 69s] rm -f src/shared/protocol.lo [ 69s] rm -f src/shared/serialize.o [ 69s] rm -f src/shared/serialize.lo [ 69s] rm -f src/shared/util.o [ 69s] rm -f src/shared/util.lo [ 69s] rm -f test/check_buxton-check_buxton.o [ 69s] rm -f test/check_buxton-check_utils.o [ 69s] rm -f test/check_buxtond-check_utils.o [ 69s] rm -f test/check_configurator-check_configurator.o [ 69s] rm -f test/check_daemon-check_daemon.o [ 69s] rm -f test/check_daemon-check_utils.o [ 69s] rm -f test/check_shared_lib-check_shared_lib.o [ 69s] rm -f test/check_shared_lib-check_utils.o [ 69s] rm -f test/check_smack-check_smack.o [ 69s] rm -f test/check_smack-check_utils.o [ 69s] test -z "check_db_clean.log check_buxton.log check_shared_lib.log check_daemon.log check_smack.log check_configurator.log" || rm -f check_db_clean.log check_buxton.log check_shared_lib.log check_daemon.log check_smack.log check_configurator.log [ 69s] test -z "check_db_clean.log-t check_buxton.log-t check_shared_lib.log-t check_daemon.log-t check_smack.log-t check_configurator.log-t" || rm -f check_db_clean.log-t check_buxton.log-t check_shared_lib.log-t check_daemon.log-t check_smack.log-t check_configurator.log-t [ 69s] test -z "test-suite.html" || rm -f test-suite.html [ 69s] test -z "test-suite.log" || rm -f test-suite.log [ 69s] rm -f *.lo [ 69s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/buxton-2' [ 69s] + make -j4 [ 69s] make all-recursive [ 69s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/buxton-2' [ 69s] Making all in . [ 69s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/buxton-2' [ 69s] CC src/security/smack.lo [ 69s] CC src/libbuxton/libbuxton_la-lbuxton.lo [ 69s] CC src/shared/backend.lo [ 69s] CC src/shared/buxtonarray.lo [ 69s] CC src/shared/buxtonlist.lo [ 69s] CC src/shared/configurator.lo [ 69s] CC src/shared/direct.lo [ 69s] CC src/shared/hashmap.lo [ 69s] CC src/shared/log.lo [ 69s] CC src/shared/protocol.lo [ 69s] CC src/shared/serialize.lo [ 69s] CC src/shared/util.lo [ 69s] CC src/shared/dictionary.lo [ 69s] CC src/shared/iniparser.lo [ 69s] CC src/db/gdbm.lo [ 69s] CC src/db/memory.lo [ 69s] CC src/cli/buxtonctl-main.o [ 69s] CC src/cli/buxtonctl-client.o [ 69s] CC src/core/buxtond-daemon.o [ 69s] CC src/core/buxtond-main.o [ 69s] CCLD libbuxton-shared.la [ 69s] CCLD gdbm.la [ 69s] CCLD memory.la [ 69s] CCLD libbuxton.la [ 69s] CCLD buxtond [ 70s] CCLD buxtonctl [ 70s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/buxton-2' [ 70s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/buxton-2' [ 70s] + exit 0 [ 70s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.yqdMWp [ 70s] + umask 022 [ 70s] + cd /home/abuild/rpmbuild/BUILD [ 70s] + cd buxton-2 [ 70s] + LANG=C [ 70s] + export LANG [ 70s] + unset DISPLAY [ 70s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm [ 70s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm [ 70s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm install [ 70s] Making install in . [ 70s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/buxton-2' [ 70s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/buxton-2' [ 70s] test -z "/usr/lib" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/lib" [ 70s] /bin/sh ./libtool --mode=install /usr/bin/install -c libbuxton.la '/home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/lib' [ 70s] libtool: install: /usr/bin/install -c .libs/libbuxton.so.1.0.0 /home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/lib/libbuxton.so.1.0.0 [ 70s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/lib && { ln -s -f libbuxton.so.1.0.0 libbuxton.so.1 || { rm -f libbuxton.so.1 && ln -s libbuxton.so.1.0.0 libbuxton.so.1; }; }) [ 70s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/lib && { ln -s -f libbuxton.so.1.0.0 libbuxton.so || { rm -f libbuxton.so && ln -s libbuxton.so.1.0.0 libbuxton.so; }; }) [ 70s] libtool: install: /usr/bin/install -c .libs/libbuxton.lai /home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/lib/libbuxton.la [ 70s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 70s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/bin" [ 70s] /bin/sh ./libtool --mode=install /usr/bin/install -c buxtonctl '/home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/bin' [ 70s] libtool: install: warning: `libbuxton.la' has not been installed in `/usr/lib' [ 70s] libtool: install: /usr/bin/install -c .libs/buxtonctl /home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/bin/buxtonctl [ 70s] test -z "/etc" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/etc" [ 70s] /usr/bin/install -c -m 644 data/buxton.conf '/home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/etc' [ 70s] test -z "/usr/lib/buxton" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/lib/buxton" [ 70s] /bin/sh ./libtool --mode=install /usr/bin/install -c gdbm.la memory.la '/home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/lib/buxton' [ 70s] libtool: install: /usr/bin/install -c .libs/gdbm.so /home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/lib/buxton/gdbm.so [ 70s] libtool: install: /usr/bin/install -c .libs/gdbm.lai /home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/lib/buxton/gdbm.la [ 70s] libtool: install: /usr/bin/install -c .libs/memory.so /home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/lib/buxton/memory.so [ 70s] libtool: install: /usr/bin/install -c .libs/memory.lai /home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/lib/buxton/memory.la [ 70s] libtool: install: warning: remember to run `libtool --finish /usr/lib/buxton' [ 70s] test -z "/usr/sbin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/sbin" [ 70s] /bin/sh ./libtool --mode=install /usr/bin/install -c buxtond '/home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/sbin' [ 70s] libtool: install: /usr/bin/install -c buxtond /home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/sbin/buxtond [ 70s] /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/var/lib/buxton [ 70s] test -z "/usr/include" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/include" [ 70s] /usr/bin/install -c -m 644 src/include/buxton.h '/home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/include' [ 70s] test -z "/usr/share/man/man1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/share/man/man1" [ 70s] test -z "/usr/share/man/man3" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/share/man/man3" [ 70s] test -z "/usr/share/man/man5" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/share/man/man5" [ 70s] test -z "/usr/share/man/man7" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/share/man/man7" [ 70s] test -z "/usr/share/man/man8" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/share/man/man8" [ 70s] test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/lib/pkgconfig" [ 70s] /usr/bin/install -c -m 644 data/libbuxton.pc '/home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/lib/pkgconfig' [ 70s] test -z "/usr/lib/systemd/system" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/lib/systemd/system" [ 70s] /usr/bin/install -c -m 644 data/buxton.service data/buxton.socket '/home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/lib/systemd/system' [ 70s] /usr/bin/make install-data-hook [ 70s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/buxton-2' [ 70s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/lib/systemd/system/sockets.target.wants [ 70s] ln -sf ../buxton.socket /home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/lib/systemd/system/sockets.target.wants/buxton.socket [ 70s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/buxton-2' [ 70s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/buxton-2' [ 70s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/buxton-2' [ 70s] + rm -f /home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/share/info/dir [ 70s] + find /home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm -regex '.*\.la$' [ 70s] + xargs rm -f -- [ 70s] + find /home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm -regex '.*\.a$' [ 70s] + xargs rm -f -- [ 70s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/var/lib/buxton [ 70s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/share/license [ 70s] + cat LICENSE.LGPL2.1 [ 70s] + cat LICENSE.LGPL2.1 [ 70s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/buxton-2 [ 70s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/sbin/buxtond [ 70s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/bin/buxtonctl [ 70s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/lib/buxton/gdbm.so [ 71s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/lib/buxton/memory.so [ 71s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm/usr/lib/libbuxton.so.1.0.0 [ 71s] symlinked /usr/lib/debug/usr/lib/libbuxton.so.1.0.0.debug to /usr/lib/debug/usr/lib/libbuxton.so.debug [ 71s] symlinked /usr/lib/debug/usr/lib/libbuxton.so.1.0.0.debug to /usr/lib/debug/usr/lib/libbuxton.so.1.debug [ 71s] 578 blocks [ 71s] + /usr/lib/rpm/check-buildroot [ 71s] + /usr/lib/rpm//brp-compress [ 71s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 71s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 71s] + /usr/lib/rpm/brp-python-hardlink [ 71s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm [ 71s] Processing files: buxton-2-1.1.armv7l [ 71s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl [ 71s] cXVlc3Q+Cgk8YXNzaWduPgoJCTxmaWxlc3lzdGVtIHBhdGg9Ii9iaW4vKiIgbGFi [ 71s] ZWw9Il8iIGV4ZWNfbGFiZWw9Im5vbmUiIC8+CgkJPGZpbGVzeXN0ZW0gcGF0aD0i [ 71s] L3NiaW4vKiIgbGFiZWw9Il8iIGV4ZWNfbGFiZWw9Im5vbmUiIC8+CgkJPGZpbGVz [ 71s] eXN0ZW0gcGF0aD0iL3Vzci9iaW4vKiIgbGFiZWw9Il8iIGV4ZWNfbGFiZWw9Im5v [ 71s] bmUiIC8+CgkJPGZpbGVzeXN0ZW0gcGF0aD0iL3Vzci9zYmluLyoiIGxhYmVsPSJf [ 71s] IiBleGVjX2xhYmVsPSJub25lIiAvPgoJPC9hc3NpZ24+CjwvbWFuaWZlc3Q+Cg== [ 71s] [ 71s] Requires(interp): /bin/sh [ 71s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 71s] Requires(post): /bin/sh [ 71s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libbuxton.so.1 libbuxton.so.1(BUXTON_1) libc.so.6 libc.so.6(GLIBC_2.17) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libc.so.6(GLIBC_2.9) libdl.so.2 libdl.so.2(GLIBC_2.4) libgdbm.so.3 libm.so.6 librt.so.1 libsystemd.so.0 libsystemd.so.0(LIBSYSTEMD_209) [ 71s] Processing files: buxton-debuginfo-2-1.1.armv7l [ 71s] Processing files: buxton-debugsource-2-1.1.armv7l [ 71s] Processing files: buxton-libs-2-1.1.armv7l [ 71s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl [ 71s] cXVlc3Q+Cgk8YXNzaWduPgoJCTxmaWxlc3lzdGVtIHBhdGg9Ii9iaW4vKiIgbGFi [ 71s] ZWw9Il8iIGV4ZWNfbGFiZWw9Im5vbmUiIC8+CgkJPGZpbGVzeXN0ZW0gcGF0aD0i [ 71s] L3NiaW4vKiIgbGFiZWw9Il8iIGV4ZWNfbGFiZWw9Im5vbmUiIC8+CgkJPGZpbGVz [ 71s] eXN0ZW0gcGF0aD0iL3Vzci9iaW4vKiIgbGFiZWw9Il8iIGV4ZWNfbGFiZWw9Im5v [ 71s] bmUiIC8+CgkJPGZpbGVzeXN0ZW0gcGF0aD0iL3Vzci9zYmluLyoiIGxhYmVsPSJf [ 71s] IiBleGVjX2xhYmVsPSJub25lIiAvPgoJPC9hc3NpZ24+CjwvbWFuaWZlc3Q+Cg== [ 71s] [ 71s] Provides: gdbm.so libbuxton.so.1 libbuxton.so.1(BUXTON_1) memory.so [ 71s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 71s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.17) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.9) libdl.so.2 libdl.so.2(GLIBC_2.4) libgdbm.so.3 libm.so.6 librt.so.1 [ 71s] Processing files: buxton-devel-2-1.1.armv7l [ 71s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl [ 71s] cXVlc3Q+Cgk8YXNzaWduPgoJCTxmaWxlc3lzdGVtIHBhdGg9Ii9iaW4vKiIgbGFi [ 71s] ZWw9Il8iIGV4ZWNfbGFiZWw9Im5vbmUiIC8+CgkJPGZpbGVzeXN0ZW0gcGF0aD0i [ 71s] L3NiaW4vKiIgbGFiZWw9Il8iIGV4ZWNfbGFiZWw9Im5vbmUiIC8+CgkJPGZpbGVz [ 71s] eXN0ZW0gcGF0aD0iL3Vzci9iaW4vKiIgbGFiZWw9Il8iIGV4ZWNfbGFiZWw9Im5v [ 71s] bmUiIC8+CgkJPGZpbGVzeXN0ZW0gcGF0aD0iL3Vzci9zYmluLyoiIGxhYmVsPSJf [ 71s] IiBleGVjX2xhYmVsPSJub25lIiAvPgoJPC9hc3NpZ24+CjwvbWFuaWZlc3Q+Cg== [ 71s] [ 71s] Provides: pkgconfig(libbuxton) = 2 [ 71s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 71s] Requires: /usr/bin/pkg-config libbuxton.so.1 [ 71s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm [ 71s] Wrote: /home/abuild/rpmbuild/SRPMS/buxton-2-1.1.src.rpm [ 71s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/buxton-2-1.1.armv7l.rpm [ 71s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/buxton-debuginfo-2-1.1.armv7l.rpm [ 71s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/buxton-debugsource-2-1.1.armv7l.rpm [ 71s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/buxton-libs-2-1.1.armv7l.rpm [ 71s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/buxton-devel-2-1.1.armv7l.rpm [ 71s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.xVmDsM [ 71s] + umask 022 [ 71s] + cd /home/abuild/rpmbuild/BUILD [ 71s] + cd buxton-2 [ 71s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/buxton-2-1.1.arm [ 71s] + exit 0 [ 71s] ... checking for files with abuild user/group [ 71s] ... creating baselibs [ 72s] ... saving built statistics [ 72s] ... saving built packages [ 72s] /home/abuild/rpmbuild/RPMS/armv7l/buxton-2-1.1.armv7l.rpm [ 72s] /home/abuild/rpmbuild/RPMS/armv7l/buxton-debuginfo-2-1.1.armv7l.rpm [ 72s] /home/abuild/rpmbuild/RPMS/armv7l/buxton-debugsource-2-1.1.armv7l.rpm [ 72s] /home/abuild/rpmbuild/RPMS/armv7l/buxton-devel-2-1.1.armv7l.rpm [ 72s] /home/abuild/rpmbuild/RPMS/armv7l/buxton-libs-2-1.1.armv7l.rpm [ 72s] /home/abuild/rpmbuild/SRPMS/buxton-2-1.1.src.rpm [ 72s] /home/abuild/rpmbuild/OTHER/_statistics [ 72s] [ 72s] w30 finished "build buxton.spec" at Thu Oct 29 05:11:37 UTC 2015. [ 72s] [ 76s] /.build/build: line 368: 227 Killed background_monitor_process [ 78s] [ 71.273469] SysRq : Power Off [ 78s] [ 71.384390] Power down. [ 78s] build: extracting built packages... [ 78s] buxton-2-1.1.armv7l.rpm [ 78s] buxton-debuginfo-2-1.1.armv7l.rpm [ 78s] buxton-debugsource-2-1.1.armv7l.rpm [ 78s] buxton-devel-2-1.1.armv7l.rpm [ 78s] buxton-libs-2-1.1.armv7l.rpm [ 78s] buxton-2-1.1.src.rpm [ 78s] _statistics Retried build at Sun Mar 6 18:07:29 2016 returned same result, skipped Retried build at Mon May 30 15:09:21 2016 returned same result, skipped