[ 0s] Using BUILD_ROOT=/srv/build/root_3/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_3/root [ 0s] [ 0s] [ 0s] w09 started "build _service:gbs:capi-data-control.spec" at Thu Oct 29 06:59:19 UTC 2015. [ 0s] [ 0s] Building capi-data-control for project 'Tizen:2.4:Mobile' repository 'target-TM1' arch 'armv7l' srcmd5 '209b175d555726e234cd0989c2787394' [ 0s] [ 0s] processing specfile /srv/build/root_3/.build-srcdir/_service:gbs:capi-data-control.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_3/.build-srcdir/_service:gbs:capi-data-control.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/3/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_3/.build.rpmlist /srv/build/root_3/.build-srcdir/_service:gbs:capi-data-control.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 0s] [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: glibc -> glibc-common -> bash [ 0s] breaking dependency glibc-common -> bash [ 0s] cycle: glibc -> glibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: glibc -> glibc-common -> coreutils [ 0s] breaking dependency coreutils -> glibc [ 0s] cycle: glibc -> glibc-common -> coreutils -> libacl [ 0s] breaking dependency libacl -> glibc [ 0s] cycle: glibc -> glibc-common -> coreutils -> libacl -> libattr [ 0s] breaking dependency libattr -> glibc [ 0s] cycle: libgcc -> glibc -> glibc-common -> coreutils -> libacl -> libattr [ 0s] breaking dependency libacl -> libattr [ 0s] cycle: libgcc -> glibc -> glibc-common -> coreutils -> libacl [ 0s] breaking dependency glibc-common -> coreutils [ 0s] cycle: glibc -> glibc-common [ 0s] breaking dependency glibc -> glibc-common [ 0s] cycle: libgcc -> glibc [ 0s] breaking dependency libgcc -> glibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/52] preinstalling tizen-release... [ 0s] [2/52] preinstalling libgcc... [ 0s] [3/52] preinstalling setup... [ 0s] [4/52] preinstalling filesystem... [ 0s] [5/52] preinstalling glibc... [ 1s] [6/52] preinstalling libattr... [ 1s] [7/52] preinstalling libacl... [ 1s] [8/52] preinstalling bash... [ 1s] [9/52] preinstalling bzip2-libs... [ 1s] [10/52] preinstalling diffutils... [ 1s] [11/52] preinstalling elfutils-libelf... [ 1s] [12/52] preinstalling libcap... [ 1s] [13/52] preinstalling liblua... [ 1s] [14/52] preinstalling libstdc++... [ 1s] [15/52] preinstalling ncurses-libs... [ 1s] [16/52] preinstalling nspr... [ 1s] [17/52] preinstalling nss-softokn-freebl... [ 1s] [18/52] preinstalling popt... [ 1s] [19/52] preinstalling readline... [ 1s] [20/52] preinstalling sed... [ 1s] [21/52] preinstalling sqlite... [ 1s] [22/52] preinstalling xz-libs... [ 1s] [23/52] preinstalling zlib... [ 1s] [24/52] preinstalling glibc-common... [ 1s] [25/52] preinstalling tar... [ 1s] [26/52] preinstalling coreutils... [ 1s] [27/52] preinstalling qemu-linux-user-x86-arm... [ 1s] [28/52] preinstalling tizen-accelerator... [ 1s] [29/52] preinstalling libfile... [ 1s] [30/52] preinstalling bzip2... [ 1s] [31/52] preinstalling nss... [ 1s] [32/52] preinstalling bzip2-libs-x86-arm... [ 1s] [33/52] preinstalling elfutils-libelf-x86-arm... [ 1s] [34/52] preinstalling glibc-x86-arm... [ 1s] [35/52] preinstalling libacl-x86-arm... [ 1s] [36/52] preinstalling libattr-x86-arm... [ 1s] [37/52] preinstalling libcap-x86-arm... [ 1s] [38/52] preinstalling libgcc-x86-arm... [ 1s] [39/52] preinstalling liblua-x86-arm... [ 1s] [40/52] preinstalling ncurses-libs-x86-arm... [ 2s] [41/52] preinstalling nspr-x86-arm... [ 2s] [42/52] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [43/52] preinstalling nss-x86-arm... [ 2s] [44/52] preinstalling popt-x86-arm... [ 2s] [45/52] preinstalling sqlite-x86-arm... [ 2s] [46/52] preinstalling xz-libs-x86-arm... [ 2s] [47/52] preinstalling zlib-x86-arm... [ 2s] [48/52] preinstalling rpm-libs... [ 2s] [49/52] preinstalling bash-x86-arm... [ 2s] [50/52] preinstalling rpm-libs-x86-arm... [ 2s] [51/52] preinstalling rpm... [ 2s] [52/52] preinstalling rpm-x86-arm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 2s] copying packages... [ 4s] reordering...cycle: bash -> glibc -> glibc-common [ 4s] breaking dependency glibc-common -> bash [ 4s] cycle: bash -> glibc -> glibc-common -> coreutils [ 4s] breaking dependency glibc-common -> coreutils [ 4s] cycle: glibc -> glibc-common -> findutils [ 4s] breaking dependency glibc-common -> findutils [ 4s] cycle: glibc -> glibc-common [ 4s] breaking dependency glibc-common -> glibc [ 4s] cycle: glibc -> glibc-common -> grep [ 4s] breaking dependency grep -> glibc [ 4s] cycle: glibc -> glibc-common -> grep -> libgcc [ 4s] breaking dependency grep -> libgcc [ 4s] cycle: glibc -> glibc-common -> grep -> libpcre [ 4s] breaking dependency libpcre -> glibc [ 4s] cycle: glibc -> glibc-common -> grep -> libpcre -> libgcc [ 4s] breaking dependency libpcre -> libgcc [ 4s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++ [ 4s] breaking dependency libstdc++ -> glibc [ 4s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 4s] breaking dependency glibc -> glibc-common [ 4s] cycle: glibc -> libgcc [ 4s] breaking dependency libgcc -> glibc [ 4s] cycle: filesystem -> setup [ 4s] breaking dependency setup -> filesystem [ 4s] cycle: gio-branding-upstream -> libgio [ 4s] breaking dependency libgio -> gio-branding-upstream [ 4s] cycle: ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses [ 4s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses-base [ 4s] cycle: perl -> perl-libs [ 4s] breaking dependency perl -> perl-libs [ 4s] cycle: perl -> perl-IO-Compress-Zlib [ 4s] breaking dependency perl -> perl-IO-Compress-Zlib [ 4s] cycle: perl -> perl-IO-Compress-Base [ 4s] breaking dependency perl -> perl-IO-Compress-Base [ 4s] cycle: perl -> perl-Module-Pluggable [ 4s] breaking dependency perl -> perl-Module-Pluggable [ 4s] cycle: perl -> perl-Pod-Simple [ 4s] breaking dependency perl -> perl-Pod-Simple [ 4s] cycle: dbus -> dbus-libs [ 4s] breaking dependency dbus -> dbus-libs [ 4s] cycle: libkey-manager-client -> key-manager [ 4s] breaking dependency key-manager -> libkey-manager-client [ 4s] cycle: pkgmgr-info -> pkgmgr-info-parser [ 4s] breaking dependency pkgmgr-info -> pkgmgr-info-parser [ 4s] cycle: xmlsec1-openssl -> xmlsec1 [ 4s] breaking dependency xmlsec1-openssl -> xmlsec1 [ 4s] cycle: efl -> eina [ 4s] breaking dependency eina -> efl [ 4s] cycle: efl -> eo [ 4s] breaking dependency eo -> efl [ 4s] cycle: ecore -> eldbus [ 4s] breaking dependency ecore -> eldbus [ 4s] cycle: ecore -> evas [ 4s] breaking dependency ecore -> evas [ 4s] cycle: nss -> nss-sysinit [ 4s] breaking dependency nss -> nss-sysinit [ 4s] cycle: rpm-libs -> rpm [ 4s] breaking dependency rpm-libs -> rpm [ 4s] done [ 8s] booting kvm ... [ 8s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 8000 -drive file=/srv/build/root_3/root,if=virtio,cache=none -drive file=/srv/build/root_3/root,if=ide,index=0,cache=none -drive file=/srv/build/root_3/swap,if=virtio,cache=none -smp 4 [ 11s] [ 0.000000] tsc: Fast TSC calibration failed [ 12s] doing fast boot [ 12s] Creating device nodes with udev [ 13s] Waiting for device /dev/vda to appear: ok [ 13s] fsck from util-linux 2.21.2 [ 13s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 13s] /dev/vda: clean, 4898/2392064 files, 230401/9568256 blocks [ 13s] fsck succeeded. Mounting root device read-write. [ 13s] Mounting root /dev/vda [ 13s] mount -o rw -t ext4 /dev/vda /root [ 13s] replacing /etc/mtab with symlink to /proc/self/mounts [ 13s] /.build/qemu-reg: line 9: interpreter '/usr/bin/qemu-armeb-binfmt' not found, ignoring [ 13s] /.build/qemu-reg: line 10: interpreter '/usr/bin/qemu-ppc-binfmt' not found, ignoring [ 13s] /.build/qemu-reg: line 11: interpreter '/usr/bin/qemu-mips-binfmt' not found, ignoring [ 13s] /.build/qemu-reg: line 12: interpreter '/usr/bin/qemu-mipsel-binfmt' not found, ignoring [ 13s] /.build/qemu-reg: line 18: interpreter '/usr/bin/qemu-sh4-binfmt' not found, ignoring [ 13s] /.build/qemu-reg: line 19: interpreter '/usr/bin/qemu-sh4eb-binfmt' not found, ignoring [ 14s] 2nd stage started in virtual machine [ 14s] machine type: armv7l [ 14s] swapon on /dev/vdb [ 14s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 14s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 14s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 14s] logging output to //.build.log... [ 14s] processing specfile /.build-srcdir/_service:gbs:capi-data-control.spec ... [ 14s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:capi-data-control.spec build rpmlint-Factory ... [ 15s] running rpm-x86-arm postinstall script [ 15s] running rpm-libs-x86-arm postinstall script [ 15s] running tizen-accelerator postinstall script [ 15s] running glibc-x86-arm postinstall script [ 15s] running bash-x86-arm postinstall script [ 16s] initializing rpm db... [ 22s] [1/279] cumulate cross-armv7l-platformfile-0.0.1-1.1 [ 22s] [2/279] cumulate kernel-headers-3.4.91-1.1 [ 22s] [3/279] cumulate libX11-common-1.6.2-1.1 [ 22s] [4/279] cumulate tizen-release-2.2.0-1.1 [ 22s] [5/279] cumulate tzdata-2014j-1.1 [ 22s] [6/279] cumulate libgcc-4.9.2-2015.02.1.11 [ 22s] [7/279] cumulate setup-0.2-1.1 [ 22s] [8/279] cumulate filesystem-0.1-1.1 [ 22s] [9/279] cumulate glibc-2.20-2014.11.1.10 [ 22s] [10/279] cumulate libstdc++-4.9.2-2015.02.1.11 [ 22s] [11/279] cumulate libatomic-4.9.2-2015.02.1.11 [ 22s] [12/279] cumulate libgomp-4.9.2-2015.02.1.11 [ 22s] [13/279] cumulate openssl-1.0.1p-1.5 [ 22s] [14/279] cumulate smack-1.0+s14-1.8 [ 22s] [15/279] cumulate bash-4.1-1.6 [ 22s] [16/279] cumulate bzip2-libs-1.0.5-1.8 [ 22s] [17/279] cumulate capi-base-common-0.2.2-1.1 [ 22s] [18/279] cumulate coregl-4.0-1.1 [ 22s] [19/279] cumulate cpio-2.8-1.6 [ 22s] [20/279] cumulate db4-4.8.30-1.8 [ 22s] [21/279] cumulate diffutils-3.0-1.6 [ 22s] [22/279] cumulate e2fsprogs-libs-1.41.9-1.4 [ 22s] [23/279] cumulate elfutils-libelf-0.152-1.12 [ 22s] [24/279] cumulate expat-2.0.1-1.8 [ 22s] [25/279] cumulate fdupes-1.40-1.5 [ 22s] [26/279] cumulate findutils-4.2.31-1.5 [ 22s] [27/279] cumulate fribidi-0.19.6-1.1 [ 22s] [28/279] cumulate gdbm-1.8.3-1.12 [ 22s] [29/279] cumulate iniparser-3.1-1.1 [ 22s] [30/279] cumulate libXau-1.0.8-1.1 [ 22s] [31/279] cumulate libattr-2.4.44-1.8 [ 22s] [32/279] cumulate libdrm2-2.4.35-1.1 [ 22s] [33/279] cumulate libffi-3.1-1.1 [ 22s] [34/279] cumulate libglib-2.44.1-1.1 [ 22s] [35/279] cumulate libitm-4.9.2-2015.02.1.11 [ 22s] [36/279] cumulate libjpeg-turbo-1.2.0-1.1 [ 22s] [37/279] cumulate liblua-5.1.4-1.6 [ 22s] [38/279] cumulate libuuid-2.20.2-1.4 [ 22s] [39/279] cumulate m4-1.4.14-1.5 [ 22s] [40/279] cumulate net-tools-1.60-2.6 [ 22s] [41/279] cumulate nspr-4.9-1.9 [ 22s] [42/279] cumulate nss-softokn-freebl-3.12.9-1.17 [ 22s] [43/279] cumulate patch-2.6-1.6 [ 23s] [44/279] cumulate pkg-config-0.25-2.6 [ 23s] [45/279] cumulate popt-1.16-1.8 [ 23s] [46/279] cumulate readline-5.2-1.6 [ 23s] [47/279] cumulate ruby-1.9.2-1.6 [ 23s] [48/279] cumulate sed-4.1.5-1.5 [ 23s] [49/279] cumulate sqlite-3.8.10.2-1.8 [ 23s] [50/279] cumulate xz-libs-5.0.3-1.8 [ 23s] [51/279] cumulate zlib-1.2.8-1.8 [ 23s] [52/279] cumulate libasan-4.9.2-2015.02.1.11 [ 23s] [53/279] cumulate libpcre-7.7-1.25 [ 23s] [54/279] cumulate libtiff-4.0.2-1.1 [ 23s] [55/279] cumulate libubsan-4.9.2-2015.02.1.11 [ 23s] [56/279] cumulate patchelf-0.5.svn20809-1.5 [ 23s] [57/279] cumulate ncurses-libs-5.7-1.8 [ 23s] [58/279] cumulate build-compare-2009.10.14-1.6 [ 23s] [59/279] cumulate libleveldb-1.1_17-1.1 [ 23s] [60/279] cumulate pkgmgr-0.3.37-1.1 [ 23s] [61/279] cumulate qemu-linux-user-x86-arm-2.2.0-4.1.1 [ 23s] [62/279] cumulate appfw-env-0.0.1-1.1 [ 23s] [63/279] cumulate capi-base-common-devel-0.2.2-1.1 [ 23s] [64/279] cumulate cpp-4.9.2-2015.02.1.11 [ 23s] [65/279] cumulate glibc-headers-2.20-2014.11.1.10 [ 23s] [66/279] cumulate libcap-2.21-1.6 [ 23s] [67/279] cumulate smack-devel-1.0+s14-1.8 [ 23s] [68/279] cumulate unzip-6.0-1.12 [ 23s] [69/279] cumulate grep-2.5.1a-1.5 [ 23s] [70/279] cumulate libacl-2.2.49-1.5 [ 23s] [71/279] cumulate libfile-5.04-1.7 [ 23s] [72/279] cumulate libgmodule-2.44.1-1.1 [ 23s] [73/279] cumulate libgthread-2.44.1-1.1 [ 23s] [74/279] cumulate libiri-1.7-1.1 [ 23s] [75/279] cumulate libpng-1.2.50-1.1 [ 23s] [76/279] cumulate libpython-2.7.1-1.5 [ 23s] [77/279] cumulate libwayland-client-1.7.0-1.1 [ 23s] [78/279] cumulate libxcb-1.10.0-1.1 [ 23s] [79/279] cumulate libxml2-2.9.2-1.3 [ 23s] [80/279] cumulate make-3.82-154.1.6 [ 23s] [81/279] cumulate minizip-1.2.8-1.8 [ 23s] [82/279] cumulate ncurses-5.7-1.8 [ 23s] [83/279] cumulate pcre-7.7-1.25 [ 23s] [84/279] cumulate psmisc-22.20-1.6 [ 23s] [85/279] cumulate smack-utils-1.0+s14-1.8 [ 23s] [86/279] cumulate vasum-0.3.1-1.1 [ 23s] [87/279] cumulate binutils-2.25.0-2015.01.1.8 [ 23s] [88/279] cumulate bzip2-1.0.5-1.8 [ 23s] [89/279] cumulate kmod-libs-15-1.1 [ 23s] [90/279] cumulate libblkid-2.20.2-1.4 [ 23s] [91/279] cumulate libgobject-2.44.1-1.1 [ 23s] [92/279] cumulate libicu-51-1.1 [ 23s] [93/279] cumulate xz-5.0.3-1.8 [ 23s] [94/279] cumulate elfutils-libs-0.152-1.12 [ 23s] [95/279] cumulate ttrace-1.0.0-1.1 [ 23s] [96/279] cumulate nss-3.12.9-1.17 [ 23s] [97/279] cumulate perl-5.12.1-1.25 [ 24s] [98/279] cumulate ncurses-base-5.7-1.8 [ 24s] [99/279] cumulate perl-HTML-Tagset-3.20-1.1 [ 24s] [100/279] cumulate perl-IO-Compress-Base-2.008-1.25 [ 24s] [101/279] cumulate perl-Module-Pluggable-3.60-1.25 [ 24s] [102/279] cumulate perl-Pod-Escapes-1.04-1.25 [ 24s] [103/279] cumulate perl-TimeDate-1.20-1.1 [ 24s] [104/279] cumulate perl-URI-1.54-1.1 [ 24s] [105/279] cumulate ca-certificates-0.0.1-1.1 [ 24s] [106/279] cumulate glibc-devel-2.20-2014.11.1.10 [ 24s] [107/279] cumulate smack-privilege-config-1.0.8-1.1 [ 24s] [108/279] cumulate file-5.04-1.7 [ 24s] [109/279] cumulate libxslt-1.1.28-1.2 [ 24s] [110/279] cumulate perl-Compress-Raw-Zlib-2.008-1.25 [ 24s] [111/279] cumulate perl-libs-5.12.1-1.25 [ 24s] [112/279] cumulate tar-1.17-1.6 [ 24s] [113/279] cumulate coreutils-6.9-1.6 [ 24s] [114/279] cumulate freetype-2.5.5-1.1 [ 24s] [115/279] cumulate libX11-1.6.2-1.1 [ 24s] [116/279] cumulate libdlog-0.4.1-1.1 [ 24s] [117/279] cumulate libmount-2.20.2-1.4 [ 24s] [118/279] cumulate xz-lzma-compat-5.0.3-1.8 [ 24s] [119/279] cumulate elfutils-0.152-1.12 [ 24s] [120/279] cumulate nss-sysinit-3.12.9-1.17 [ 24s] [121/279] cumulate python-base-2.7.1-1.5 [ 24s] [122/279] cumulate glibc-common-2.20-2014.11.1.10 [ 24s] [123/279] cumulate libgio-2.44.1-1.1 [ 24s] [124/279] cumulate libarchive-2.8.3-1.2 [ 24s] [125/279] cumulate rpm-libs-4.9.1-4.3.1.10 [ 24s] [126/279] cumulate gio-branding-upstream-2.44.1-1.1 [ 24s] [127/279] cumulate libstdc++-devel-4.9.2-2015.02.1.11 [ 24s] [128/279] cumulate perl-Pod-Simple-3.07-1.25 [ 24s] [129/279] cumulate tizen-accelerator-1.0.1-1.1 [ 24s] [130/279] cumulate giflib-4.1.6-1.1 [ 24s] [131/279] cumulate libXcomposite-0.4.4-1.1 [ 24s] [132/279] cumulate libXdamage-1.1.4-1.1 [ 24s] [133/279] cumulate libXext-1.3.2-1.1 [ 24s] [134/279] cumulate libXfixes-5.0.1-1.1 [ 24s] [135/279] cumulate libXrender-0.9.8-1.1 [ 24s] [136/279] cumulate libdlog-devel-0.4.1-1.1 [ 24s] [137/279] cumulate perl-IO-Compress-Zlib-2.008-1.25 [ 24s] [138/279] cumulate tizen-security-policy-1.2.2.1-1.1 [ 24s] [139/279] cumulate gawk-3.1.5-1.6 [ 24s] [140/279] cumulate gzip-1.3.12-1.6 [ 24s] [141/279] cumulate harfbuzz-0.9.40-1.1 [ 24s] [142/279] cumulate pam-1.1.5-1.5 [ 24s] [143/279] cumulate perl-HTML-Parser-3.65-1.5 [ 24s] [144/279] cumulate python-xml-2.7.1-1.5 [ 24s] [145/279] cumulate xdgmime-0.0.12-1.1 [ 24s] [146/279] cumulate app-checker-0.0.20-1.1 [ 24s] [147/279] cumulate autoconf-2.68-1.1 [ 24s] [148/279] cumulate build-2011.01.10a-1.1 [ 24s] [149/279] cumulate bundle-0.1.36-1.1 [ 24s] [150/279] installing rpm-4.9.1-4.3.1.10 [ 26s] [151/279] cumulate libslp-db-util-0.1.8-1.1 [ 26s] [152/279] cumulate python-lxml-2.2.3-1.2 [ 26s] [153/279] cumulate capi-system-info-0.2.0-1.1 [ 26s] [154/279] cumulate dbus-1.8.16-1.1 [ 26s] [155/279] cumulate glib2-tools-2.44.1-1.1 [ 26s] [156/279] cumulate util-linux-2.20.2-1.4 [ 26s] [157/279] cumulate xmlsec1-openssl-1.2.14-1.1 [ 26s] [158/279] cumulate cmake-2.8.5-1.1.2 [ 26s] [159/279] cumulate fontconfig-2.11.92-1.1 [ 26s] [160/279] cumulate python-2.7.1-1.3 [ 26s] [161/279] cumulate gcc-4.9.2-2015.02.1.11 [ 26s] [162/279] cumulate automake-1.11.1-1.1 [ 26s] [163/279] cumulate bundle-devel-0.1.36-1.1 [ 26s] [164/279] cumulate bzip2-libs-x86-arm-1.0.5-9.1.4 [ 26s] [165/279] cumulate dbus-libs-1.8.16-1.1 [ 26s] [166/279] cumulate elfutils-libelf-x86-arm-0.152-9.1.4 [ 26s] [167/279] cumulate elfutils-libs-x86-arm-0.152-9.1.4 [ 26s] [168/279] cumulate expat-x86-arm-2.0.1-1.4 [ 26s] [169/279] cumulate glibc-x86-arm-2.20-9.1.5 [ 26s] [170/279] cumulate libacl-x86-arm-2.2.49-9.1.4 [ 26s] [171/279] cumulate libarchive-x86-arm-2.8.3-1.3 [ 26s] [172/279] cumulate libattr-x86-arm-2.4.44-9.1.4 [ 26s] [173/279] cumulate libcap-x86-arm-2.21-9.1.4 [ 26s] [174/279] cumulate libfile-x86-arm-5.04-9.1.4 [ 26s] [175/279] cumulate libgcc-x86-arm-4.9.2-9.1.4 [ 26s] [176/279] cumulate liblua-x86-arm-5.1.4-9.1.3 [ 26s] [177/279] cumulate libpython-x86-arm-2.7.1-9.1.3 [ 26s] [178/279] cumulate libstdc++-x86-arm-4.9.2-9.1.4 [ 26s] [179/279] cumulate libxml2-x86-arm-2.9.2-9.1.3 [ 26s] [180/279] cumulate libxslt-x86-arm-1.1.28-9.1.3 [ 26s] [181/279] cumulate ncurses-libs-x86-arm-5.7-9.1.3 [ 26s] [182/279] cumulate nspr-x86-arm-4.9-9.1.5 [ 26s] [183/279] cumulate nss-softokn-freebl-x86-arm-3.12.9-9.1.5 [ 26s] [184/279] cumulate nss-x86-arm-3.12.9-9.1.5 [ 26s] [185/279] cumulate openssl-x86-arm-1.0.1p-9.1.3 [ 26s] [186/279] cumulate perl-libs-x86-arm-5.12.1-9.1.5 [ 26s] [187/279] cumulate popt-x86-arm-1.16-9.1.4 [ 26s] [188/279] cumulate python-lxml-x86-arm-2.2.3-9.1.3 [ 27s] [189/279] cumulate python-x86-arm-2.7.1-9.1.3 [ 27s] [190/279] cumulate python-xml-x86-arm-2.7.1-9.1.3 [ 27s] [191/279] cumulate rpm-libs-x86-arm-4.9.1-9.1.4 [ 27s] [192/279] cumulate sqlite-x86-arm-3.8.10.2-9.1.3 [ 27s] [193/279] cumulate xz-libs-x86-arm-5.0.3-9.1.4 [ 27s] [194/279] cumulate zlib-x86-arm-1.2.8-9.1.4 [ 27s] [195/279] cumulate gcc-c++-4.9.2-2015.02.1.11 [ 27s] [196/279] cumulate libXgesture-0.1.1-1.1 [ 27s] [197/279] cumulate libXi-1.7.3-1.1 [ 27s] [198/279] cumulate libXinerama-1.1.3-1.1 [ 27s] [199/279] cumulate libXtst-1.2.4-1.1 [ 27s] [200/279] cumulate libXv-1.0.10-1.1 [ 27s] [201/279] cumulate libdri2-0.2.1-1.1 [ 27s] [202/279] cumulate perl-Compress-Zlib-2.008-1.25 [ 27s] [203/279] cumulate systemd-libs-216-1.1 [ 27s] [204/279] cumulate app-checker-server-0.0.20-1.1 [ 27s] [205/279] cumulate eventsystem-0.0.1-1.1 [ 27s] [206/279] cumulate libXcursor-1.1.14-1.1 [ 27s] [207/279] cumulate libXrandr-1.4.2-1.1 [ 27s] [208/279] cumulate librua-0.1.8-1.1 [ 27s] [209/279] cumulate xmlsec1-1.2.14-1.1 [ 27s] [210/279] cumulate glib2-devel-2.44.1-1.1 [ 27s] [211/279] cumulate rpm-build-4.9.1-4.3.1.10 [ 27s] [212/279] cumulate bash-x86-arm-4.1-9.1.4 [ 27s] [213/279] cumulate diffutils-x86-arm-3.0-9.1.4 [ 27s] [214/279] cumulate fdupes-x86-arm-1.40-9.1.4 [ 27s] [215/279] cumulate findutils-x86-arm-4.2.31-9.1.4 [ 27s] [216/279] cumulate gawk-x86-arm-3.1.5-9.1.3 [ 27s] [217/279] cumulate gzip-x86-arm-1.3.12-9.1.4 [ 27s] [218/279] cumulate libtool-2.2.6b-1.8 [ 27s] [219/279] cumulate m4-x86-arm-1.4.14-9.1.4 [ 27s] [220/279] cumulate make-x86-arm-3.82-9.1.3 [ 27s] [221/279] cumulate patch-x86-arm-2.6-9.1.4 [ 27s] [222/279] cumulate perl-libwww-perl-5.836-1.1 [ 27s] [223/279] cumulate pkg-config-x86-arm-0.25-9.1.4 [ 27s] [224/279] cumulate ruby-x86-arm-1.9.2-9.1.4 [ 27s] [225/279] cumulate sed-x86-arm-4.1.5-9.1.4 [ 27s] [226/279] cumulate bzip2-x86-arm-1.0.5-1.4 [ 27s] [227/279] cumulate perl-x86-arm-5.12.1-9.1.5 [ 27s] [228/279] cumulate python-base-x86-arm-2.7.1-9.1.3 [ 27s] [229/279] cumulate coreutils-x86-arm-6.9-9.1.4 [ 28s] [230/279] cumulate cross-armv7l-gcc-accel-x86-armv7l-4.9.2-2015.02.1.6 [ 28s] [231/279] cumulate dbus-glib-0.100-1.1 [ 28s] [232/279] cumulate eina-1.13.26-1.1 [ 28s] [233/279] cumulate file-x86-arm-5.04-9.1.4 [ 28s] [234/279] cumulate libkey-manager-common-0.1.13-1.1 [ 28s] [235/279] cumulate libtbm-1.1.8-1.1 [ 28s] [236/279] cumulate tar-x86-arm-1.17-9.1.4 [ 28s] [237/279] cumulate libslp-utilx-0.5.4-1.1 [ 28s] [238/279] cumulate elfutils-x86-arm-0.152-9.1.4 [ 28s] [239/279] cumulate systemd-216-1.1 [ 28s] [240/279] cumulate cmake-x86-arm-2.8.5-1.3 [ 28s] [241/279] cumulate rpm-x86-arm-4.9.1-9.1.4 [ 28s] [242/279] cumulate rpm-build-x86-arm-4.9.1-9.1.4 [ 28s] [243/279] cumulate eo-1.13.26-1.1 [ 28s] [244/279] cumulate perl-HTML-Parser-x86-arm-3.65-9.1.3 [ 28s] [245/279] cumulate cross-armv7l-binutils-accel-x86-armv7l-2.25.0-2015.01.1.3 [ 28s] [246/279] cumulate perl-XML-Parser-2.36-1.6 [ 28s] [247/279] cumulate vconf-0.2.84-1.1 [ 28s] [248/279] cumulate security-server-0.0.132-1.1 [ 28s] [249/279] cumulate efl-1.13.26-1.1 [ 28s] [250/279] cumulate perl-XML-Parser-x86-arm-2.36-9.1.3 [ 28s] [251/279] cumulate libsecurity-server-client-0.0.132-1.1 [ 28s] [252/279] cumulate pkgmgr-info-0.0.230-1.1 [ 28s] [253/279] cumulate ector-1.13.26-1.1 [ 28s] [254/279] cumulate libprivilege-control-0.0.93-1.1 [ 28s] [255/279] cumulate eet-1.13.26-1.1 [ 28s] [256/279] cumulate ss-server-0.12.13-1.1 [ 28s] [257/279] cumulate pkgmgr-installer-0.3.37-1.1 [ 28s] [258/279] cumulate pkgmgr-info-parser-0.0.230-1.1 [ 28s] [259/279] cumulate privacy-manager-server-0.0.6-1.1 [ 28s] [260/279] cumulate libss-client-0.12.13-1.1 [ 28s] [261/279] cumulate pkgmgr-client-0.3.37-1.1 [ 28s] [262/279] cumulate ecore-1.13.26-1.1 [ 28s] [263/279] cumulate eldbus-1.13.26-1.1 [ 28s] [264/279] cumulate key-manager-0.1.13-1.1 [ 28s] [265/279] cumulate evas-1.13.26-1.1 [ 28s] [266/279] cumulate edbus-1.6.0+svn.76526slp2+build11-1.1 [ 28s] [267/279] cumulate libkey-manager-client-0.1.13-1.1 [ 28s] [268/279] cumulate resourced-0.2.86-1.1 [ 28s] [269/279] cumulate cert-svc-1.0.2-1.1 [ 28s] [270/279] cumulate libresourced-0.2.86-1.1 [ 28s] [271/279] cumulate aul-0.2.3.0-1.1 [ 28s] [272/279] cumulate app-svc-0.1.78-1.1 [ 28s] [273/279] cumulate privacy-manager-client-0.0.6-1.1 [ 28s] [274/279] cumulate privacy-manager-client-devel-0.0.6-1.1 [ 28s] [275/279] cumulate security-privilege-checker-0.0.4-1.1 [ 28s] [276/279] cumulate data-control-0.2.3.2-1.1 [ 28s] [277/279] cumulate data-control-devel-0.2.3.2-1.1 [ 28s] [278/279] cumulate security-privilege-checker-devel-0.0.4-1.1 [ 28s] [279/279] now installing cumulated packages [ 31s] Preparing... ################################################## [ 31s] setup ################################################## [ 31s] filesystem ################################################## [ 32s] tzdata ################################################## [ 32s] libX11-common ################################################## [ 32s] tizen-release ################################################## [ 32s] kernel-headers ################################################## [ 32s] cross-armv7l-platformfile ################################################## [ 32s] bash ################################################## [ 32s] findutils ################################################## [ 32s] grep ################################################## [ 32s] coreutils ################################################## [ 32s] glibc-common ################################################## [ 32s] libgcc ################################################## [ 32s] /sbin/ldconfig: relative path `1' used to build cache [ 32s] warning: %post(libgcc-4.9.2-2015.02.1.11.armv7l) scriptlet failed, exit status 1 [ 32s] glibc ################################################## [ 32s] libstdc++ ################################################## [ 32s] libattr ################################################## [ 32s] libacl ################################################## [ 32s] libpcre ################################################## [ 32s] tizen-accelerator ################################################## [ 33s] glibc-x86-arm ################################################## [ 33s] libattr-x86-arm ################################################## [ 33s] libacl-x86-arm ################################################## [ 33s] libgcc-x86-arm ################################################## [ 33s] pkgmgr ################################################## [ 33s] libstdc++-x86-arm ################################################## [ 33s] glibc-headers ################################################## [ 33s] glibc-devel ################################################## [ 34s] libstdc++-devel ################################################## [ 34s] tizen-security-policy ################################################## [ 34s] coreutils-x86-arm ################################################## [ 36s] bash-x86-arm ################################################## [ 36s] findutils-x86-arm ################################################## [ 36s] build-compare ################################################## [ 37s] qemu-linux-user-x86-arm ################################################## [ 37s] libglib ################################################## [ 37s] zlib ################################################## [ 37s] openssl ################################################## [ 37s] sqlite ################################################## [ 37s] pkg-config ################################################## [ 37s] libxml2 ################################################## [ 37s] smack ################################################## [ 37s] xz-libs ################################################## [ 37s] zlib-x86-arm ################################################## [ 37s] libcap ################################################## [ 37s] bzip2-libs ################################################## [ 37s] elfutils-libelf ################################################## [ 37s] vasum ################################################## [ 37s] bzip2-libs-x86-arm ################################################## [ 37s] libxslt ################################################## [ 37s] expat ################################################## [ 37s] ncurses-libs ################################################## [ 37s] ncurses ################################################## [ 37s] ncurses-base ################################################## [ 37s] libpython ################################################## [ 37s] python-base ################################################## [ 37s] smack-utils ################################################## [ 37s] libdlog ################################################## [ 37s] libslp-db-util ################################################## [ 37s] binutils ################################################## [ 37s] capi-base-common ################################################## [ 37s] bundle ################################################## [ 37s] liblua ################################################## [ 37s] elfutils-libelf-x86-arm ################################################## [ 37s] xz-libs-x86-arm ################################################## [ 37s] libfile ################################################## [ 37s] libpng ################################################## [ 37s] freetype ################################################## [ 37s] libgmodule ################################################## [ 37s] iniparser ################################################## [ 37s] capi-system-info ################################################## [ 37s] libuuid ################################################## [ 37s] libblkid ################################################## [ 37s] nspr ################################################## [ 38s] popt ################################################## [ 38s] sed ################################################## [ 38s] popt-x86-arm ################################################## [ 38s] nspr-x86-arm ################################################## [ 38s] libfile-x86-arm ################################################## [ 38s] liblua-x86-arm ################################################## [ 38s] capi-base-common-devel ################################################## [ 38s] libcap-x86-arm ################################################## [ 38s] fontconfig ################################################## [ 40s] file ################################################## [ 40s] ttrace ################################################## [ 40s] python-xml ################################################## [ 40s] xmlsec1-openssl ################################################## [ 40s] xmlsec1 ################################################## [ 40s] elfutils-libs ################################################## [ 40s] elfutils ################################################## [ 40s] bzip2 ################################################## [ 40s] libarchive ################################################## [ 40s] xz ################################################## [ 40s] libgthread ################################################## [ 40s] tar ################################################## [ 40s] libicu ################################################## [ 40s] harfbuzz ################################################## [ 40s] diffutils ################################################## [ 40s] fribidi ################################################## [ 40s] libdrm2 ################################################## [ 40s] libffi ################################################## [ 40s] libgobject ################################################## [ 40s] gio-branding-upstream ################################################## [ 40s] libgio ################################################## [ 40s] libjpeg-turbo ################################################## [ 40s] m4 ################################################## [ 41s] nss-softokn-freebl ################################################## [ 41s] nss ################################################## [ 41s] nss-sysinit ################################################## [ 41s] nss-x86-arm ################################################## [ 41s] rpm-libs ################################################## [ 41s] rpm-libs-x86-arm ################################################## [ 41s] patch ################################################## [ 41s] gawk ################################################## [ 41s] gzip ################################################## [ 41s] pam ################################################## [ 41s] systemd-libs ################################################## [ 41s] eina ################################################## [ 41s] eo ################################################## [ 41s] efl ################################################## [ 41s] ector ################################################## [ 41s] eet ################################################## [ 41s] libkey-manager-common ################################################## [ 41s] xdgmime ################################################## [ 41s] libarchive-x86-arm ################################################## [ 41s] elfutils-libs-x86-arm ################################################## [ 41s] ca-certificates ################################################## [ 41s] smack-privilege-config ################################################## [ 41s] /var/tmp/rpm-tmp.jJ5iKV: line 2: which: command not found [ 41s] api_feature_loader not present [ 41s] libpython-x86-arm ################################################## [ 41s] smack-devel ################################################## [ 41s] libxml2-x86-arm ################################################## [ 41s] libleveldb ################################################## [ 41s] openssl-x86-arm ################################################## [ 41s] glib2-tools ################################################## [ 41s] libwayland-client ################################################## [ 41s] xz-lzma-compat ################################################## [ 41s] cmake ################################################## [ 42s] libmount ################################################## [ 42s] eventsystem ################################################## [ 42s] librua ################################################## [ 42s] app-checker ################################################## [ 42s] app-checker-server ################################################## [ 42s] python-lxml ################################################## [ 42s] kmod-libs ################################################## [ 42s] cpp ################################################## [ 42s] minizip ################################################## [ 42s] libasan ################################################## [ 42s] libtiff ################################################## [ 42s] libubsan ################################################## [ 42s] libatomic ################################################## [ 42s] libgomp ################################################## [ 42s] coregl ################################################## [ 42s] cpio ################################################## [ 42s] db4 ################################################## [ 42s] fdupes ################################################## [ 42s] gdbm ################################################## [ 42s] perl-Pod-Escapes ################################################## [ 42s] perl-Compress-Raw-Zlib ################################################## [ 42s] perl-IO-Compress-Base ################################################## [ 42s] perl-Module-Pluggable ################################################## [ 42s] perl-Pod-Simple ################################################## [ 42s] perl-IO-Compress-Zlib ################################################## [ 42s] perl-libs ################################################## [ 43s] perl ################################################## [ 43s] perl-URI ################################################## [ 43s] autoconf ################################################## [ 43s] automake ################################################## [ 43s] perl-HTML-Tagset ################################################## [ 43s] perl-TimeDate ################################################## [ 43s] perl-Compress-Zlib ################################################## [ 43s] perl-libs-x86-arm ################################################## [ 44s] perl-x86-arm ################################################## [ 45s] perl-HTML-Parser ################################################## [ 45s] perl-libwww-perl ################################################## [ 45s] perl-XML-Parser ################################################## [ 45s] libXau ################################################## [ 45s] libxcb ################################################## [ 45s] libX11 ################################################## [ 45s] libXext ################################################## [ 45s] libXrender ################################################## [ 45s] libXrandr ################################################## [ 45s] libXdamage ################################################## [ 45s] libXfixes ################################################## [ 45s] libXcursor ################################################## [ 45s] libXgesture ################################################## [ 45s] libXi ################################################## [ 45s] libXinerama ################################################## [ 45s] libXtst ################################################## [ 45s] libdri2 ################################################## [ 45s] libXcomposite ################################################## [ 45s] dbus-libs ################################################## [ 45s] dbus ################################################## [ 45s] systemd ################################################## [ 45s] vconf ################################################## [ 45s] Failed to get D-Bus connection: Unknown error -1 [ 45s] pkgmgr-info-parser ################################################## [ 45s] pkgmgr-info ################################################## [ 45s] mkdir: cannot create directory `/usr/etc/package-manager': File exists [ 45s] dbus-glib ################################################## [ 45s] pkgmgr-installer ################################################## [ 45s] libtbm ################################################## [ 45s] libXv ################################################## [ 45s] libslp-utilx ################################################## [ 45s] giflib ################################################## [ 45s] eldbus ################################################## [ 45s] ecore ################################################## [ 45s] evas ################################################## [ 45s] edbus ################################################## [ 45s] resourced ################################################## [ 45s] libresourced ################################################## [ 45s] libitm ################################################## [ 46s] gcc ################################################## [ 46s] gcc-c++ ################################################## [ 47s] cross-armv7l-gcc-accel-x86-a################################################## [ 47s] "GCCVER: 4.9 GCCVER_NEW: 4.9 " [ 47s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 47s] readline ################################################## [ 47s] python ################################################## [ 47s] ruby ################################################## [ 47s] appfw-env ################################################## [ 47s] unzip ################################################## [ 47s] rpm-build ################################################## [ 47s] libiri ################################################## [ 47s] security-server ################################################## [ 47s] Failed to get D-Bus connection: Unknown error -1 [ 47s] Failed to get D-Bus connection: Unknown error -1 [ 47s] Applying sql update files on db [ 47s] /opt/dbspace/.rules-db.db3 [ 47s] Creating database from scratch [ 52s] Loading permissions for all versions from '/usr/share/privilege-control/' [ 52s] Done. [ 52s] Loading additional rules from file '/usr/share/privilege-control/ADDITIONAL_RULES.smack' [ 52s] Done. [ 52s] libsecurity-server-client ################################################## [ 52s] libprivilege-control ################################################## [ 52s] ss-server ################################################## [ 52s] Failed to get D-Bus connection: Unknown error -1 [ 52s] Failed to get D-Bus connection: Unknown error -1 [ 52s] warning: %post(ss-server-0.12.13-1.1.armv7l) scriptlet failed, exit status 1 [ 52s] libss-client ################################################## [ 52s] privacy-manager-server ################################################## [ 52s] Check privacy DB [ 52s] Create privacy DB [ 52s] persist [ 53s] pkgmgr-client ################################################## [ 53s] libkey-manager-client ################################################## [ 53s] key-manager ################################################## [ 53s] Failed to get D-Bus connection: Unknown error -1 [ 53s] Failed to get D-Bus connection: Unknown error -1 [ 53s] cert-svc ################################################## [ 53s] Failed to get D-Bus connection: Unknown error -1 [ 53s] Failed to get D-Bus connection: Unknown error -1 [ 53s] create .cert_svc_vcore.db [ 53s] add ssl table to certs-meta.db [ 53s] persist [ 103s] aul ################################################## [ 103s] persist [ 103s] privacy-manager-client ################################################## [ 103s] privacy-manager-client-devel################################################## [ 103s] security-privilege-checker ################################################## [ 103s] app-svc ################################################## [ 103s] data-control ################################################## [ 103s] make ################################################## [ 103s] make-x86-arm ################################################## [ 103s] data-control-devel ################################################## [ 103s] security-privilege-checker-d################################################## [ 103s] rpm-build-x86-arm ################################################## [ 103s] ruby-x86-arm ################################################## [ 103s] python-x86-arm ################################################## [ 104s] cross-armv7l-binutils-accel-################################################## [ 104s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/addr2line': File exists [ 104s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ar': File exists [ 104s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/as': File exists [ 104s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/c++filt': File exists [ 104s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/elfedit': File exists [ 104s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/gprof': File exists [ 104s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld': File exists [ 104s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld.bfd': File exists [ 104s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld.gold': File exists [ 104s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/nm': File exists [ 104s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/objcopy': File exists [ 104s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/objdump': File exists [ 104s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ranlib': File exists [ 104s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/readelf': File exists [ 104s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/size': File exists [ 104s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/strings': File exists [ 104s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/strip': File exists [ 104s] perl-XML-Parser-x86-arm ################################################## [ 104s] perl-HTML-Parser-x86-arm ################################################## [ 104s] build ################################################## [ 104s] libtool ################################################## [ 104s] fdupes-x86-arm ################################################## [ 104s] python-lxml-x86-arm ################################################## [ 105s] cmake-x86-arm ################################################## [ 105s] python-base-x86-arm ################################################## [ 106s] elfutils-x86-arm ################################################## [ 106s] gzip-x86-arm ################################################## [ 106s] gawk-x86-arm ################################################## [ 106s] patch-x86-arm ################################################## [ 106s] rpm-x86-arm ################################################## [ 106s] /bin/rpm.orig-arm already present - skipping. [ 106s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 106s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 106s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 106s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 106s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 106s] nss-softokn-freebl-x86-arm ################################################## [ 106s] m4-x86-arm ################################################## [ 106s] diffutils-x86-arm ################################################## [ 106s] tar-x86-arm ################################################## [ 106s] bzip2-x86-arm ################################################## [ 106s] python-xml-x86-arm ################################################## [ 106s] file-x86-arm ################################################## [ 106s] libdlog-devel ################################################## [ 106s] bundle-devel ################################################## [ 106s] sed-x86-arm ################################################## [ 106s] ncurses-libs-x86-arm ################################################## [ 106s] expat-x86-arm ################################################## [ 106s] libxslt-x86-arm ################################################## [ 106s] mv: cannot stat `/usr/bin/xsltproc': No such file or directory [ 106s] pkg-config-x86-arm ################################################## [ 106s] sqlite-x86-arm ################################################## [ 106s] glib2-devel ################################################## [ 107s] util-linux ################################################## [ 107s] psmisc ################################################## [ 107s] pcre ################################################## [ 107s] patchelf ################################################## [ 107s] e2fsprogs-libs ################################################## [ 107s] net-tools ################################################## [ 108s] removing nis flags from //etc/nsswitch.conf... [ 108s] now finalizing build dir... [ 109s] build target is armv7l-tizen-linux [ 109s] ----------------------------------------------------------------- [ 109s] I have the following modifications for capi-data-control.spec: [ 109s] 5c5 [ 109s] < Release: 1 [ 109s] --- [ 109s] > Release: %{?release_prefix:%{release_prefix}.}1.1 [ 109s] ----------------------------------------------------------------- [ 109s] ----- building capi-data-control.spec (user abuild) [ 109s] ----------------------------------------------------------------- [ 109s] ----------------------------------------------------------------- [ 109s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:2.4:Mobile/target-TM1/209b175d555726e234cd0989c2787394-capi-data-control' /home/abuild/rpmbuild/SOURCES/capi-data-control.spec [ 109s] Building target platforms: armv7l-tizen-linux [ 109s] Building for target armv7l-tizen-linux [ 109s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.Aj7H7u [ 109s] + umask 022 [ 109s] + cd /home/abuild/rpmbuild/BUILD [ 109s] + cd /home/abuild/rpmbuild/BUILD [ 109s] + rm -rf capi-data-control-1.2.3.2 [ 109s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/capi-data-control-1.2.3.2.tar.gz [ 109s] + /bin/tar -xf - [ 109s] + STATUS=0 [ 109s] + '[' 0 -ne 0 ']' [ 109s] + cd capi-data-control-1.2.3.2 [ 109s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 109s] + cp /home/abuild/rpmbuild/SOURCES/capi-data-control.manifest . [ 109s] + exit 0 [ 109s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.0K3N8y [ 109s] + umask 022 [ 109s] + cd /home/abuild/rpmbuild/BUILD [ 109s] + cd capi-data-control-1.2.3.2 [ 109s] + LANG=C [ 109s] + export LANG [ 109s] + unset DISPLAY [ 109s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 109s] + export CFLAGS [ 109s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 109s] + export CXXFLAGS [ 109s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 109s] + export FFLAGS [ 109s] + LD_AS_NEEDED=1 [ 109s] + export LD_AS_NEEDED [ 109s] ++ echo 1.2.3.2 [ 109s] ++ awk 'BEGIN {FS="."}{print $1}' [ 109s] + MAJORVER=1 [ 109s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -D_SECURE_LOG -DTIZEN_DEBUG_ENABLE' [ 109s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 109s] + export CFLAGS [ 109s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -D_SECURE_LOG -DTIZEN_DEBUG_ENABLE' [ 109s] + export CXXFLAGS [ 109s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 109s] + export FFLAGS [ 109s] + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON . -DFULLVER=1.2.3.2 -DMAJORVER=1 [ 109s] -- The C compiler identification is GNU [ 109s] -- The CXX compiler identification is GNU [ 109s] -- Check for working C compiler: /usr/bin/gcc [ 109s] -- Check for working C compiler: /usr/bin/gcc -- works [ 109s] -- Detecting C compiler ABI info [ 109s] -- Detecting C compiler ABI info - done [ 109s] -- Check for working CXX compiler: /usr/bin/c++ [ 109s] -- Check for working CXX compiler: /usr/bin/c++ -- works [ 109s] -- Detecting CXX compiler ABI info [ 109s] -- Detecting CXX compiler ABI info - done [ 109s] -- checking for module 'data-control dlog glib-2.0 capi-base-common bundle security-privilege-checker' [ 109s] -- found data-control dlog glib-2.0 capi-base-common bundle security-privilege-checker, version 1.1;1.0;2.44.1;0.2.2;0.1.22;1.0.1 [ 109s] -- Configuring done [ 109s] -- Generating done [ 109s] CMake Warning: [ 109s] Manually-specified variables were not used by the project: [ 109s] [ 109s] CMAKE_INSTALL_LIBDIR [ 109s] SHARE_INSTALL_PREFIX [ 109s] SYSCONF_INSTALL_DIR [ 109s] [ 109s] [ 109s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2 [ 109s] + make -j4 [ 109s] /emul/ia32-linux/usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2 -B/home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2 --check-build-system CMakeFiles/Makefile.cmake 0 [ 109s] /emul/ia32-linux/usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/CMakeFiles /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/CMakeFiles/progress.marks [ 109s] make -f CMakeFiles/Makefile2 all [ 109s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2' [ 109s] make -f src/CMakeFiles/capi-data-control.dir/build.make src/CMakeFiles/capi-data-control.dir/depend [ 109s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2' [ 109s] cd /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2 && /emul/ia32-linux/usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2 /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/src /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2 /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/src /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/src/CMakeFiles/capi-data-control.dir/DependInfo.cmake --color= [ 109s] Scanning dependencies of target capi-data-control [ 109s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2' [ 109s] make -f src/CMakeFiles/capi-data-control.dir/build.make src/CMakeFiles/capi-data-control.dir/build [ 109s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2' [ 109s] /emul/ia32-linux/usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/CMakeFiles 1 [ 109s] /emul/ia32-linux/usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/CMakeFiles 2 [ 109s] /emul/ia32-linux/usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/CMakeFiles 3 [ 109s] [ 20%] /emul/ia32-linux/usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/CMakeFiles 4 [ 109s] [ 40%] [ 60%] [ 80%] Building C object src/CMakeFiles/capi-data-control.dir/data_control_internal.c.o [ 109s] cd /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/src && /usr/bin/gcc -Dcapi_data_control_EXPORTS -DPREFIX=\"/usr\" -DSLP_DEBUG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I/usr/include/appfw -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/privacy_manager -fPIC -Wall -Werror -fvisibility=hidden -fPIC -I/home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/include -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -o CMakeFiles/capi-data-control.dir/data_control_internal.c.o -c /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/src/data_control_internal.c [ 109s] Building C object src/CMakeFiles/capi-data-control.dir/data_control_sql_cursor.c.o [ 109s] Building C object src/CMakeFiles/capi-data-control.dir/data_control_map.c.o [ 109s] cd /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/src && /usr/bin/gcc -Dcapi_data_control_EXPORTS -DPREFIX=\"/usr\" -DSLP_DEBUG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I/usr/include/appfw -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/privacy_manager -fPIC -Wall -Werror -fvisibility=hidden -fPIC -I/home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/include -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -o CMakeFiles/capi-data-control.dir/data_control_sql_cursor.c.o -c /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/src/data_control_sql_cursor.c [ 109s] cd /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/src && /usr/bin/gcc -Dcapi_data_control_EXPORTS -DPREFIX=\"/usr\" -DSLP_DEBUG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I/usr/include/appfw -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/privacy_manager -fPIC -Wall -Werror -fvisibility=hidden -fPIC -I/home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/include -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -o CMakeFiles/capi-data-control.dir/data_control_map.c.o -c /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/src/data_control_map.c [ 109s] Building C object src/CMakeFiles/capi-data-control.dir/data_control_sql.c.o [ 109s] cd /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/src && /usr/bin/gcc -Dcapi_data_control_EXPORTS -DPREFIX=\"/usr\" -DSLP_DEBUG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I/usr/include/appfw -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/privacy_manager -fPIC -Wall -Werror -fvisibility=hidden -fPIC -I/home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/include -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -o CMakeFiles/capi-data-control.dir/data_control_sql.c.o -c /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/src/data_control_sql.c [ 109s] /emul/ia32-linux/usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/CMakeFiles 5 [ 109s] [100%] Building C object src/CMakeFiles/capi-data-control.dir/data_control_provider.c.o [ 109s] cd /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/src && /usr/bin/gcc -Dcapi_data_control_EXPORTS -DPREFIX=\"/usr\" -DSLP_DEBUG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I/usr/include/appfw -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/privacy_manager -fPIC -Wall -Werror -fvisibility=hidden -fPIC -I/home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/include -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -o CMakeFiles/capi-data-control.dir/data_control_provider.c.o -c /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/src/data_control_provider.c [ 109s] Linking C shared library ../cmake_build_tmp/output/libcapi-data-control.so [ 109s] cd /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/src && /emul/ia32-linux/usr/bin/cmake -E cmake_link_script CMakeFiles/capi-data-control.dir/link.txt --verbose=1 [ 109s] /usr/bin/gcc -fPIC -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I/usr/include/appfw -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/privacy_manager -fPIC -Wall -Werror -fvisibility=hidden -Wl,--no-undefined -Wl,--as-needed -shared -Wl,-soname,libcapi-data-control.so.1 -o ../cmake_build_tmp/output/libcapi-data-control.so.1.2.3.2 CMakeFiles/capi-data-control.dir/data_control_internal.c.o CMakeFiles/capi-data-control.dir/data_control_map.c.o CMakeFiles/capi-data-control.dir/data_control_sql.c.o CMakeFiles/capi-data-control.dir/data_control_sql_cursor.c.o CMakeFiles/capi-data-control.dir/data_control_provider.c.o -L/home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/cmake_build_tmp/output -ldata-control -ldlog -lpthread -lglib-2.0 -lbundle -lcapi-base-common -lsecurity-privilege-checker -lsmack -lprivacy-manager-client [ 110s] cd /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/src && /emul/ia32-linux/usr/bin/cmake -E cmake_symlink_library ../cmake_build_tmp/output/libcapi-data-control.so.1.2.3.2 ../cmake_build_tmp/output/libcapi-data-control.so.1 ../cmake_build_tmp/output/libcapi-data-control.so [ 110s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2' [ 110s] /emul/ia32-linux/usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/CMakeFiles 1 2 3 4 5 [ 110s] [100%] Built target capi-data-control [ 110s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2' [ 110s] /emul/ia32-linux/usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/CMakeFiles 0 [ 110s] + exit 0 [ 110s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.s8rQ9F [ 110s] + umask 022 [ 110s] + cd /home/abuild/rpmbuild/BUILD [ 110s] + cd capi-data-control-1.2.3.2 [ 110s] + LANG=C [ 110s] + export LANG [ 110s] + unset DISPLAY [ 110s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-data-control-1.2.3.2-1.1.arm [ 110s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-data-control-1.2.3.2-1.1.arm [ 110s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-data-control-1.2.3.2-1.1.arm [ 110s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-data-control-1.2.3.2-1.1.arm/usr/share/license [ 110s] + install LICENSE.Apache-2.0 /home/abuild/rpmbuild/BUILDROOT/capi-data-control-1.2.3.2-1.1.arm/usr/share/license/capi-data-control [ 110s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/capi-data-control-1.2.3.2-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/capi-data-control-1.2.3.2-1.1.arm install [ 110s] /emul/ia32-linux/usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2 -B/home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2 --check-build-system CMakeFiles/Makefile.cmake 0 [ 110s] /emul/ia32-linux/usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/CMakeFiles /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/CMakeFiles/progress.marks [ 110s] /usr/bin/make -f CMakeFiles/Makefile2 all [ 110s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2' [ 110s] /usr/bin/make -f src/CMakeFiles/capi-data-control.dir/build.make src/CMakeFiles/capi-data-control.dir/depend [ 110s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2' [ 110s] cd /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2 && /emul/ia32-linux/usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2 /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/src /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2 /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/src /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/src/CMakeFiles/capi-data-control.dir/DependInfo.cmake --color= [ 110s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2' [ 110s] /usr/bin/make -f src/CMakeFiles/capi-data-control.dir/build.make src/CMakeFiles/capi-data-control.dir/build [ 110s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2' [ 110s] make[2]: Nothing to be done for `src/CMakeFiles/capi-data-control.dir/build'. [ 110s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2' [ 110s] /emul/ia32-linux/usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/CMakeFiles 1 2 3 4 5 [ 110s] [100%] Built target capi-data-control [ 110s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2' [ 110s] /emul/ia32-linux/usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2/CMakeFiles 0 [ 110s] /usr/bin/make -f CMakeFiles/Makefile2 preinstall [ 110s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2' [ 110s] make[1]: Nothing to be done for `preinstall'. [ 110s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2' [ 110s] Install the project... [ 110s] /emul/ia32-linux/usr/bin/cmake -P cmake_install.cmake [ 110s] -- Install configuration: "" [ 110s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-data-control-1.2.3.2-1.1.arm/usr/lib/pkgconfig/capi-data-control.pc [ 110s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-data-control-1.2.3.2-1.1.arm/usr/include/appfw [ 110s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-data-control-1.2.3.2-1.1.arm/usr/include/appfw/data_control_sql.h [ 110s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-data-control-1.2.3.2-1.1.arm/usr/include/appfw/data_control_sql_cursor.h [ 110s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-data-control-1.2.3.2-1.1.arm/usr/include/appfw/data_control_internal.h [ 110s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-data-control-1.2.3.2-1.1.arm/usr/include/appfw/data_control_types.h [ 110s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-data-control-1.2.3.2-1.1.arm/usr/include/appfw/data_control_provider.h [ 110s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-data-control-1.2.3.2-1.1.arm/usr/include/appfw/data_control_map.h [ 110s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-data-control-1.2.3.2-1.1.arm/usr/include/appfw/data_control.h [ 110s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-data-control-1.2.3.2-1.1.arm/usr/lib [ 110s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-data-control-1.2.3.2-1.1.arm/usr/lib/libcapi-data-control.so.1 [ 110s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-data-control-1.2.3.2-1.1.arm/usr/lib/libcapi-data-control.so.1.2.3.2 [ 110s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-data-control-1.2.3.2-1.1.arm/usr/lib/libcapi-data-control.so [ 110s] + rm -f /home/abuild/rpmbuild/BUILDROOT/capi-data-control-1.2.3.2-1.1.arm/usr/share/info/dir [ 110s] + xargs rm -f -- [ 110s] + find /home/abuild/rpmbuild/BUILDROOT/capi-data-control-1.2.3.2-1.1.arm -regex '.*\.la$' [ 110s] + find /home/abuild/rpmbuild/BUILDROOT/capi-data-control-1.2.3.2-1.1.arm -regex '.*\.a$' [ 110s] + xargs rm -f -- [ 110s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/capi-data-control-1.2.3.2 [ 110s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/capi-data-control-1.2.3.2-1.1.arm/usr/lib/libcapi-data-control.so.1.2.3.2 [ 110s] symlinked /usr/lib/debug/usr/lib/libcapi-data-control.so.1.2.3.2.debug to /usr/lib/debug/usr/lib/libcapi-data-control.so.1.debug [ 110s] symlinked /usr/lib/debug/usr/lib/libcapi-data-control.so.1.2.3.2.debug to /usr/lib/debug/usr/lib/libcapi-data-control.so.debug [ 110s] 245 blocks [ 110s] + /usr/lib/rpm/check-buildroot [ 110s] + /usr/lib/rpm//brp-compress [ 110s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 110s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 110s] + /usr/lib/rpm/brp-python-hardlink [ 110s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/capi-data-control-1.2.3.2-1.1.arm [ 110s] Processing files: capi-data-control-1.2.3.2-1.1.armv7l [ 110s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl [ 110s] cXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 110s] [ 110s] Provides: libcapi-data-control.so.1 libcapi-data-control.so.1 [ 110s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 110s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 110s] Requires(post): /sbin/ldconfig /sbin/ldconfig coreutils [ 110s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 110s] Requires: libbundle.so.0 libc.so.6 libc.so.6(GLIBC_2.4) libcapi-base-common.so.0 libcapi-data-control.so.1 libdata-control.so.0 libdlog.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libglib-2.0.so.0 libsecurity-privilege-checker.so.0 rtld(GNU_HASH) [ 110s] Processing files: capi-data-control-debuginfo-1.2.3.2-1.1.armv7l [ 110s] Processing files: capi-data-control-debugsource-1.2.3.2-1.1.armv7l [ 110s] Processing files: capi-data-control-devel-1.2.3.2-1.1.armv7l [ 110s] Provides: pkgconfig(capi-data-control) = 1.2.3.2 [ 110s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 110s] Requires: /usr/bin/pkg-config libcapi-data-control.so.1 pkgconfig(bundle) pkgconfig(capi-base-common) pkgconfig(data-control) pkgconfig(dlog) pkgconfig(glib-2.0) pkgconfig(security-privilege-checker) [ 110s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/capi-data-control-1.2.3.2-1.1.arm [ 110s] Wrote: /home/abuild/rpmbuild/SRPMS/capi-data-control-1.2.3.2-1.1.src.rpm [ 110s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-data-control-1.2.3.2-1.1.armv7l.rpm [ 110s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-data-control-debuginfo-1.2.3.2-1.1.armv7l.rpm [ 110s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-data-control-debugsource-1.2.3.2-1.1.armv7l.rpm [ 110s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-data-control-devel-1.2.3.2-1.1.armv7l.rpm [ 110s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.8cLMWy [ 110s] + umask 022 [ 110s] + cd /home/abuild/rpmbuild/BUILD [ 110s] + cd capi-data-control-1.2.3.2 [ 110s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-data-control-1.2.3.2-1.1.arm [ 110s] + exit 0 [ 110s] ... checking for files with abuild user/group [ 110s] ... creating baselibs [ 110s] ... saving built statistics [ 110s] ... saving built packages [ 111s] /home/abuild/rpmbuild/RPMS/armv7l/capi-data-control-1.2.3.2-1.1.armv7l.rpm [ 111s] /home/abuild/rpmbuild/RPMS/armv7l/capi-data-control-debuginfo-1.2.3.2-1.1.armv7l.rpm [ 111s] /home/abuild/rpmbuild/RPMS/armv7l/capi-data-control-debugsource-1.2.3.2-1.1.armv7l.rpm [ 111s] /home/abuild/rpmbuild/RPMS/armv7l/capi-data-control-devel-1.2.3.2-1.1.armv7l.rpm [ 111s] /home/abuild/rpmbuild/SRPMS/capi-data-control-1.2.3.2-1.1.src.rpm [ 111s] /home/abuild/rpmbuild/OTHER/_statistics [ 111s] [ 111s] w09 finished "build capi-data-control.spec" at Thu Oct 29 07:01:09 UTC 2015. [ 111s] [ 114s] [ 102.177930] SysRq : Power Off [ 114s] [ 102.388203] Power down. [ 114s] build: extracting built packages... [ 114s] capi-data-control-1.2.3.2-1.1.armv7l.rpm [ 114s] capi-data-control-debuginfo-1.2.3.2-1.1.armv7l.rpm [ 114s] capi-data-control-debugsource-1.2.3.2-1.1.armv7l.rpm [ 114s] capi-data-control-devel-1.2.3.2-1.1.armv7l.rpm [ 114s] capi-data-control-1.2.3.2-1.1.src.rpm [ 114s] _statistics Retried build at Tue Jan 5 18:08:36 2016 returned same result, skipped Retried build at Sun Mar 6 18:42:29 2016 returned same result, skipped Retried build at Mon May 30 15:28:31 2016 returned same result, skipped