[ 0s] Using BUILD_ROOT=/srv/build/root_3/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_3/root [ 0s] [ 0s] [ 0s] w25 started "build _service:gbs:capi-network-serial.spec" at Thu Oct 29 04:54:05 UTC 2015. [ 0s] [ 0s] Building capi-network-serial for project 'Tizen:2.4:Mobile' repository 'target-TM1' arch 'armv7l' srcmd5 '67343869522121c18273ee4718c72eae' [ 0s] [ 0s] processing specfile /srv/build/root_3/.build-srcdir/_service:gbs:capi-network-serial.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_3/.build-srcdir/_service:gbs:capi-network-serial.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/3/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_3/.build.rpmlist /srv/build/root_3/.build-srcdir/_service:gbs:capi-network-serial.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 0s] [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: glibc -> glibc-common -> bash [ 0s] breaking dependency glibc-common -> bash [ 0s] cycle: glibc -> glibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: glibc -> glibc-common -> coreutils [ 0s] breaking dependency coreutils -> glibc [ 0s] cycle: glibc -> glibc-common -> coreutils -> libacl [ 0s] breaking dependency libacl -> glibc [ 0s] cycle: glibc -> glibc-common -> coreutils -> libacl -> libattr [ 0s] breaking dependency libattr -> glibc [ 0s] cycle: libgcc -> glibc -> glibc-common -> coreutils -> libacl -> libattr [ 0s] breaking dependency libacl -> libattr [ 0s] cycle: libgcc -> glibc -> glibc-common -> coreutils -> libacl [ 0s] breaking dependency glibc-common -> coreutils [ 0s] cycle: glibc -> glibc-common [ 0s] breaking dependency glibc -> glibc-common [ 0s] cycle: libgcc -> glibc [ 0s] breaking dependency libgcc -> glibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/52] preinstalling tizen-release... [ 0s] [2/52] preinstalling libgcc... [ 0s] [3/52] preinstalling setup... [ 0s] [4/52] preinstalling filesystem... [ 0s] [5/52] preinstalling glibc... [ 1s] [6/52] preinstalling libattr... [ 1s] [7/52] preinstalling libacl... [ 1s] [8/52] preinstalling bash... [ 1s] [9/52] preinstalling bzip2-libs... [ 1s] [10/52] preinstalling diffutils... [ 1s] [11/52] preinstalling elfutils-libelf... [ 1s] [12/52] preinstalling libcap... [ 1s] [13/52] preinstalling liblua... [ 1s] [14/52] preinstalling libstdc++... [ 1s] [15/52] preinstalling ncurses-libs... [ 1s] [16/52] preinstalling nspr... [ 1s] [17/52] preinstalling nss-softokn-freebl... [ 1s] [18/52] preinstalling popt... [ 1s] [19/52] preinstalling readline... [ 1s] [20/52] preinstalling sed... [ 1s] [21/52] preinstalling sqlite... [ 1s] [22/52] preinstalling xz-libs... [ 1s] [23/52] preinstalling zlib... [ 1s] [24/52] preinstalling glibc-common... [ 1s] [25/52] preinstalling tar... [ 1s] [26/52] preinstalling coreutils... [ 1s] [27/52] preinstalling qemu-linux-user-x86-arm... [ 1s] [28/52] preinstalling tizen-accelerator... [ 1s] [29/52] preinstalling libfile... [ 1s] [30/52] preinstalling bzip2... [ 1s] [31/52] preinstalling nss... [ 1s] [32/52] preinstalling bzip2-libs-x86-arm... [ 1s] [33/52] preinstalling elfutils-libelf-x86-arm... [ 1s] [34/52] preinstalling glibc-x86-arm... [ 1s] [35/52] preinstalling libacl-x86-arm... [ 1s] [36/52] preinstalling libattr-x86-arm... [ 1s] [37/52] preinstalling libcap-x86-arm... [ 1s] [38/52] preinstalling libgcc-x86-arm... [ 1s] [39/52] preinstalling liblua-x86-arm... [ 1s] [40/52] preinstalling ncurses-libs-x86-arm... [ 1s] [41/52] preinstalling nspr-x86-arm... [ 1s] [42/52] preinstalling nss-softokn-freebl-x86-arm... [ 1s] [43/52] preinstalling nss-x86-arm... [ 1s] [44/52] preinstalling popt-x86-arm... [ 1s] [45/52] preinstalling sqlite-x86-arm... [ 1s] [46/52] preinstalling xz-libs-x86-arm... [ 1s] [47/52] preinstalling zlib-x86-arm... [ 1s] [48/52] preinstalling rpm-libs... [ 2s] [49/52] preinstalling bash-x86-arm... [ 2s] [50/52] preinstalling rpm-libs-x86-arm... [ 2s] [51/52] preinstalling rpm... [ 2s] [52/52] preinstalling rpm-x86-arm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 2s] copying packages... [ 3s] reordering...cycle: bash -> glibc -> glibc-common [ 3s] breaking dependency glibc-common -> bash [ 3s] cycle: bash -> glibc -> glibc-common -> coreutils [ 3s] breaking dependency glibc-common -> coreutils [ 3s] cycle: glibc -> glibc-common -> findutils [ 3s] breaking dependency glibc-common -> findutils [ 3s] cycle: glibc -> glibc-common [ 3s] breaking dependency glibc-common -> glibc [ 3s] cycle: glibc -> glibc-common -> grep [ 3s] breaking dependency grep -> glibc [ 3s] cycle: glibc -> glibc-common -> grep -> libgcc [ 3s] breaking dependency grep -> libgcc [ 3s] cycle: glibc -> glibc-common -> grep -> libpcre [ 3s] breaking dependency libpcre -> glibc [ 3s] cycle: glibc -> glibc-common -> grep -> libpcre -> libgcc [ 3s] breaking dependency libpcre -> libgcc [ 3s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++ [ 3s] breaking dependency libstdc++ -> glibc [ 3s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 3s] breaking dependency glibc -> glibc-common [ 3s] cycle: glibc -> libgcc [ 3s] breaking dependency libgcc -> glibc [ 3s] cycle: filesystem -> setup [ 3s] breaking dependency setup -> filesystem [ 3s] cycle: gio-branding-upstream -> libgio [ 3s] breaking dependency libgio -> gio-branding-upstream [ 3s] cycle: ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses [ 3s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses-base [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl -> perl-libs [ 3s] cycle: perl -> perl-IO-Compress-Zlib [ 3s] breaking dependency perl -> perl-IO-Compress-Zlib [ 3s] cycle: perl -> perl-IO-Compress-Base [ 3s] breaking dependency perl -> perl-IO-Compress-Base [ 3s] cycle: perl -> perl-Module-Pluggable [ 3s] breaking dependency perl -> perl-Module-Pluggable [ 3s] cycle: perl -> perl-Pod-Simple [ 3s] breaking dependency perl -> perl-Pod-Simple [ 3s] cycle: nss -> nss-sysinit [ 3s] breaking dependency nss -> nss-sysinit [ 3s] cycle: rpm-libs -> rpm [ 3s] breaking dependency rpm-libs -> rpm [ 3s] done [ 12s] booting kvm ... [ 12s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 8000 -drive file=/srv/build/root_3/root,if=virtio,cache=none -drive file=/srv/build/root_3/root,if=ide,index=0,cache=none -drive file=/srv/build/root_3/swap,if=virtio,cache=none -smp 4 [ 15s] doing fast boot [ 15s] Creating device nodes with udev [ 23s] Waiting for device /dev/vda to appear: ok [ 23s] fsck from util-linux 2.21.2 [ 23s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 24s] /dev/vda: clean, 4707/2392064 files, 224245/9568256 blocks [ 24s] fsck succeeded. Mounting root device read-write. [ 24s] Mounting root /dev/vda [ 24s] mount -o rw -t ext4 /dev/vda /root [ 24s] replacing /etc/mtab with symlink to /proc/self/mounts [ 27s] /.build/qemu-reg: line 9: interpreter '/usr/bin/qemu-armeb-binfmt' not found, ignoring [ 27s] /.build/qemu-reg: line 10: interpreter '/usr/bin/qemu-ppc-binfmt' not found, ignoring [ 27s] /.build/qemu-reg: line 11: interpreter '/usr/bin/qemu-mips-binfmt' not found, ignoring [ 27s] /.build/qemu-reg: line 12: interpreter '/usr/bin/qemu-mipsel-binfmt' not found, ignoring [ 27s] /.build/qemu-reg: line 18: interpreter '/usr/bin/qemu-sh4-binfmt' not found, ignoring [ 27s] /.build/qemu-reg: line 19: interpreter '/usr/bin/qemu-sh4eb-binfmt' not found, ignoring [ 44s] 2nd stage started in virtual machine [ 44s] machine type: armv7l [ 45s] swapon on /dev/vdb [ 45s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 45s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 47s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 48s] logging output to //.build.log... [ 49s] processing specfile /.build-srcdir/_service:gbs:capi-network-serial.spec ... [ 49s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:capi-network-serial.spec build rpmlint-Factory ... [ 56s] running rpm-x86-arm postinstall script [ 57s] running rpm-libs-x86-arm postinstall script [ 58s] running tizen-accelerator postinstall script [ 58s] running glibc-x86-arm postinstall script [ 58s] running bash-x86-arm postinstall script [ 59s] initializing rpm db... [ 64s] [1/184] cumulate cross-armv7l-platformfile-0.0.1-1.1 [ 66s] [2/184] cumulate kernel-headers-3.4.91-1.1 [ 66s] [3/184] cumulate tizen-release-2.2.0-1.1 [ 66s] [4/184] cumulate tzdata-2014j-1.1 [ 66s] [5/184] cumulate libgcc-4.9.2-2015.02.1.11 [ 67s] [6/184] cumulate setup-0.2-1.1 [ 68s] [7/184] cumulate filesystem-0.1-1.1 [ 71s] [8/184] cumulate glibc-2.20-2014.11.1.10 [ 71s] [9/184] cumulate libstdc++-4.9.2-2015.02.1.11 [ 73s] [10/184] cumulate libatomic-4.9.2-2015.02.1.11 [ 74s] [11/184] cumulate libgomp-4.9.2-2015.02.1.11 [ 75s] [12/184] cumulate openssl-1.0.1p-1.5 [ 75s] [13/184] cumulate smack-1.0+s14-1.8 [ 75s] [14/184] cumulate bash-4.1-1.6 [ 75s] [15/184] cumulate bzip2-libs-1.0.5-1.8 [ 75s] [16/184] cumulate capi-base-common-0.2.2-1.1 [ 76s] [17/184] cumulate cpio-2.8-1.6 [ 76s] [18/184] cumulate db4-4.8.30-1.8 [ 76s] [19/184] cumulate diffutils-3.0-1.6 [ 76s] [20/184] cumulate e2fsprogs-libs-1.41.9-1.4 [ 76s] [21/184] cumulate elfutils-libelf-0.152-1.12 [ 77s] [22/184] cumulate expat-2.0.1-1.8 [ 77s] [23/184] cumulate fdupes-1.40-1.5 [ 77s] [24/184] cumulate findutils-4.2.31-1.5 [ 77s] [25/184] cumulate gdbm-1.8.3-1.12 [ 77s] [26/184] cumulate libattr-2.4.44-1.8 [ 77s] [27/184] cumulate libffi-3.1-1.1 [ 77s] [28/184] cumulate libglib-2.44.1-1.1 [ 77s] [29/184] cumulate libitm-4.9.2-2015.02.1.11 [ 77s] [30/184] cumulate liblua-5.1.4-1.6 [ 78s] [31/184] cumulate libuuid-2.20.2-1.4 [ 78s] [32/184] cumulate m4-1.4.14-1.5 [ 78s] [33/184] cumulate net-tools-1.60-2.6 [ 78s] [34/184] cumulate nspr-4.9-1.9 [ 78s] [35/184] cumulate nss-softokn-freebl-3.12.9-1.17 [ 78s] [36/184] cumulate patch-2.6-1.6 [ 78s] [37/184] cumulate pkg-config-0.25-2.6 [ 78s] [38/184] cumulate popt-1.16-1.8 [ 78s] [39/184] cumulate readline-5.2-1.6 [ 79s] [40/184] cumulate ruby-1.9.2-1.6 [ 79s] [41/184] cumulate sed-4.1.5-1.5 [ 79s] [42/184] cumulate sqlite-3.8.10.2-1.8 [ 79s] [43/184] cumulate xz-libs-5.0.3-1.8 [ 79s] [44/184] cumulate zlib-1.2.8-1.8 [ 80s] [45/184] cumulate libasan-4.9.2-2015.02.1.11 [ 80s] [46/184] cumulate libpcre-7.7-1.25 [ 80s] [47/184] cumulate libubsan-4.9.2-2015.02.1.11 [ 80s] [48/184] cumulate patchelf-0.5.svn20809-1.5 [ 80s] [49/184] cumulate ncurses-libs-5.7-1.8 [ 80s] [50/184] cumulate build-compare-2009.10.14-1.6 [ 80s] [51/184] cumulate qemu-linux-user-x86-arm-2.2.0-4.1.1 [ 80s] [52/184] cumulate capi-base-common-devel-0.2.2-1.1 [ 80s] [53/184] cumulate cpp-4.9.2-2015.02.1.11 [ 80s] [54/184] cumulate glibc-headers-2.20-2014.11.1.10 [ 80s] [55/184] cumulate libcap-2.21-1.6 [ 80s] [56/184] cumulate unzip-6.0-1.12 [ 81s] [57/184] cumulate grep-2.5.1a-1.5 [ 81s] [58/184] cumulate libacl-2.2.49-1.5 [ 81s] [59/184] cumulate libfile-5.04-1.7 [ 81s] [60/184] cumulate libgmodule-2.44.1-1.1 [ 81s] [61/184] cumulate libgthread-2.44.1-1.1 [ 81s] [62/184] cumulate libpython-2.7.1-1.5 [ 82s] [63/184] cumulate libxml2-2.9.2-1.3 [ 82s] [64/184] cumulate make-3.82-154.1.6 [ 82s] [65/184] cumulate ncurses-5.7-1.8 [ 82s] [66/184] cumulate pcre-7.7-1.25 [ 82s] [67/184] cumulate psmisc-22.20-1.6 [ 83s] [68/184] cumulate smack-utils-1.0+s14-1.8 [ 83s] [69/184] cumulate binutils-2.25.0-2015.01.1.8 [ 83s] [70/184] cumulate bzip2-1.0.5-1.8 [ 83s] [71/184] cumulate libblkid-2.20.2-1.4 [ 83s] [72/184] cumulate libgobject-2.44.1-1.1 [ 83s] [73/184] cumulate xz-5.0.3-1.8 [ 83s] [74/184] cumulate elfutils-libs-0.152-1.12 [ 84s] [75/184] cumulate nss-3.12.9-1.17 [ 84s] [76/184] cumulate perl-5.12.1-1.25 [ 84s] [77/184] cumulate ncurses-base-5.7-1.8 [ 84s] [78/184] cumulate perl-HTML-Tagset-3.20-1.1 [ 84s] [79/184] cumulate perl-IO-Compress-Base-2.008-1.25 [ 84s] [80/184] cumulate perl-Module-Pluggable-3.60-1.25 [ 84s] [81/184] cumulate perl-Pod-Escapes-1.04-1.25 [ 84s] [82/184] cumulate perl-TimeDate-1.20-1.1 [ 85s] [83/184] cumulate perl-URI-1.54-1.1 [ 85s] [84/184] cumulate glibc-devel-2.20-2014.11.1.10 [ 85s] [85/184] cumulate file-5.04-1.7 [ 85s] [86/184] cumulate libxslt-1.1.28-1.2 [ 86s] [87/184] cumulate perl-Compress-Raw-Zlib-2.008-1.25 [ 86s] [88/184] cumulate perl-libs-5.12.1-1.25 [ 87s] [89/184] cumulate tar-1.17-1.6 [ 87s] [90/184] cumulate coreutils-6.9-1.6 [ 87s] [91/184] cumulate libdlog-0.4.1-1.1 [ 87s] [92/184] cumulate libmount-2.20.2-1.4 [ 87s] [93/184] cumulate xz-lzma-compat-5.0.3-1.8 [ 88s] [94/184] cumulate elfutils-0.152-1.12 [ 88s] [95/184] cumulate nss-sysinit-3.12.9-1.17 [ 88s] [96/184] cumulate python-base-2.7.1-1.5 [ 88s] [97/184] cumulate glibc-common-2.20-2014.11.1.10 [ 88s] [98/184] cumulate libgio-2.44.1-1.1 [ 89s] [99/184] cumulate libarchive-2.8.3-1.2 [ 89s] [100/184] cumulate rpm-libs-4.9.1-4.3.1.10 [ 89s] [101/184] cumulate gio-branding-upstream-2.44.1-1.1 [ 89s] [102/184] cumulate libstdc++-devel-4.9.2-2015.02.1.11 [ 89s] [103/184] cumulate perl-Pod-Simple-3.07-1.25 [ 89s] [104/184] cumulate tizen-accelerator-1.0.1-1.1 [ 89s] [105/184] cumulate libdlog-devel-0.4.1-1.1 [ 90s] [106/184] cumulate perl-IO-Compress-Zlib-2.008-1.25 [ 91s] [107/184] cumulate gawk-3.1.5-1.6 [ 91s] [108/184] cumulate gzip-1.3.12-1.6 [ 91s] [109/184] cumulate perl-HTML-Parser-3.65-1.5 [ 91s] [110/184] cumulate python-xml-2.7.1-1.5 [ 91s] [111/184] cumulate autoconf-2.68-1.1 [ 91s] [112/184] cumulate build-2011.01.10a-1.1 [ 92s] [113/184] installing rpm-4.9.1-4.3.1.10 [ 93s] [114/184] cumulate python-lxml-2.2.3-1.2 [ 93s] [115/184] cumulate glib2-tools-2.44.1-1.1 [ 93s] [116/184] cumulate util-linux-2.20.2-1.4 [ 93s] [117/184] cumulate cmake-2.8.5-1.1.2 [ 93s] [118/184] cumulate python-2.7.1-1.3 [ 94s] [119/184] cumulate gcc-4.9.2-2015.02.1.11 [ 94s] [120/184] cumulate automake-1.11.1-1.1 [ 94s] [121/184] cumulate bzip2-libs-x86-arm-1.0.5-9.1.4 [ 94s] [122/184] cumulate elfutils-libelf-x86-arm-0.152-9.1.4 [ 94s] [123/184] cumulate elfutils-libs-x86-arm-0.152-9.1.4 [ 94s] [124/184] cumulate expat-x86-arm-2.0.1-1.4 [ 94s] [125/184] cumulate glibc-x86-arm-2.20-9.1.5 [ 94s] [126/184] cumulate libacl-x86-arm-2.2.49-9.1.4 [ 94s] [127/184] cumulate libarchive-x86-arm-2.8.3-1.3 [ 94s] [128/184] cumulate libattr-x86-arm-2.4.44-9.1.4 [ 94s] [129/184] cumulate libcap-x86-arm-2.21-9.1.4 [ 94s] [130/184] cumulate libfile-x86-arm-5.04-9.1.4 [ 94s] [131/184] cumulate libgcc-x86-arm-4.9.2-9.1.4 [ 94s] [132/184] cumulate liblua-x86-arm-5.1.4-9.1.3 [ 94s] [133/184] cumulate libpython-x86-arm-2.7.1-9.1.3 [ 95s] [134/184] cumulate libstdc++-x86-arm-4.9.2-9.1.4 [ 95s] [135/184] cumulate libxml2-x86-arm-2.9.2-9.1.3 [ 95s] [136/184] cumulate libxslt-x86-arm-1.1.28-9.1.3 [ 95s] [137/184] cumulate ncurses-libs-x86-arm-5.7-9.1.3 [ 95s] [138/184] cumulate nspr-x86-arm-4.9-9.1.5 [ 95s] [139/184] cumulate nss-softokn-freebl-x86-arm-3.12.9-9.1.5 [ 95s] [140/184] cumulate nss-x86-arm-3.12.9-9.1.5 [ 95s] [141/184] cumulate openssl-x86-arm-1.0.1p-9.1.3 [ 95s] [142/184] cumulate perl-libs-x86-arm-5.12.1-9.1.5 [ 95s] [143/184] cumulate popt-x86-arm-1.16-9.1.4 [ 95s] [144/184] cumulate python-lxml-x86-arm-2.2.3-9.1.3 [ 95s] [145/184] cumulate python-x86-arm-2.7.1-9.1.3 [ 95s] [146/184] cumulate python-xml-x86-arm-2.7.1-9.1.3 [ 95s] [147/184] cumulate rpm-libs-x86-arm-4.9.1-9.1.4 [ 95s] [148/184] cumulate sqlite-x86-arm-3.8.10.2-9.1.3 [ 95s] [149/184] cumulate xz-libs-x86-arm-5.0.3-9.1.4 [ 95s] [150/184] cumulate zlib-x86-arm-1.2.8-9.1.4 [ 95s] [151/184] cumulate gcc-c++-4.9.2-2015.02.1.11 [ 96s] [152/184] cumulate perl-Compress-Zlib-2.008-1.25 [ 96s] [153/184] cumulate glib2-devel-2.44.1-1.1 [ 96s] [154/184] cumulate rpm-build-4.9.1-4.3.1.10 [ 96s] [155/184] cumulate bash-x86-arm-4.1-9.1.4 [ 96s] [156/184] cumulate diffutils-x86-arm-3.0-9.1.4 [ 96s] [157/184] cumulate fdupes-x86-arm-1.40-9.1.4 [ 96s] [158/184] cumulate findutils-x86-arm-4.2.31-9.1.4 [ 96s] [159/184] cumulate gawk-x86-arm-3.1.5-9.1.3 [ 96s] [160/184] cumulate gzip-x86-arm-1.3.12-9.1.4 [ 96s] [161/184] cumulate libtool-2.2.6b-1.8 [ 96s] [162/184] cumulate m4-x86-arm-1.4.14-9.1.4 [ 96s] [163/184] cumulate make-x86-arm-3.82-9.1.3 [ 96s] [164/184] cumulate patch-x86-arm-2.6-9.1.4 [ 96s] [165/184] cumulate perl-libwww-perl-5.836-1.1 [ 96s] [166/184] cumulate pkg-config-x86-arm-0.25-9.1.4 [ 96s] [167/184] cumulate ruby-x86-arm-1.9.2-9.1.4 [ 96s] [168/184] cumulate sed-x86-arm-4.1.5-9.1.4 [ 97s] [169/184] cumulate bzip2-x86-arm-1.0.5-1.4 [ 97s] [170/184] cumulate perl-x86-arm-5.12.1-9.1.5 [ 97s] [171/184] cumulate python-base-x86-arm-2.7.1-9.1.3 [ 97s] [172/184] cumulate coreutils-x86-arm-6.9-9.1.4 [ 97s] [173/184] cumulate cross-armv7l-gcc-accel-x86-armv7l-4.9.2-2015.02.1.6 [ 97s] [174/184] cumulate file-x86-arm-5.04-9.1.4 [ 97s] [175/184] cumulate tar-x86-arm-1.17-9.1.4 [ 97s] [176/184] cumulate elfutils-x86-arm-0.152-9.1.4 [ 97s] [177/184] cumulate cmake-x86-arm-2.8.5-1.3 [ 98s] [178/184] cumulate rpm-x86-arm-4.9.1-9.1.4 [ 98s] [179/184] cumulate rpm-build-x86-arm-4.9.1-9.1.4 [ 98s] [180/184] cumulate perl-HTML-Parser-x86-arm-3.65-9.1.3 [ 98s] [181/184] cumulate cross-armv7l-binutils-accel-x86-armv7l-2.25.0-2015.01.1.3 [ 98s] [182/184] cumulate perl-XML-Parser-2.36-1.6 [ 98s] [183/184] cumulate perl-XML-Parser-x86-arm-2.36-9.1.3 [ 98s] [184/184] now installing cumulated packages [ 103s] Preparing... ################################################## [ 103s] setup ################################################## [ 105s] filesystem ################################################## [ 105s] tzdata ################################################## [ 105s] tizen-release ################################################## [ 105s] kernel-headers ################################################## [ 105s] cross-armv7l-platformfile ################################################## [ 105s] bash ################################################## [ 105s] findutils ################################################## [ 106s] grep ################################################## [ 106s] coreutils ################################################## [ 107s] glibc-common ################################################## [ 107s] libgcc ################################################## [ 107s] /sbin/ldconfig: relative path `1' used to build cache [ 107s] warning: %post(libgcc-4.9.2-2015.02.1.11.armv7l) scriptlet failed, exit status 1 [ 108s] glibc ################################################## [ 108s] libstdc++ ################################################## [ 108s] libattr ################################################## [ 108s] libacl ################################################## [ 108s] libpcre ################################################## [ 108s] tizen-accelerator ################################################## [ 110s] glibc-x86-arm ################################################## [ 111s] libattr-x86-arm ################################################## [ 111s] libacl-x86-arm ################################################## [ 111s] libgcc-x86-arm ################################################## [ 111s] libstdc++-x86-arm ################################################## [ 112s] glibc-headers ################################################## [ 112s] glibc-devel ################################################## [ 112s] libstdc++-devel ################################################## [ 113s] coreutils-x86-arm ################################################## [ 115s] bash-x86-arm ################################################## [ 115s] findutils-x86-arm ################################################## [ 115s] build-compare ################################################## [ 116s] qemu-linux-user-x86-arm ################################################## [ 116s] zlib ################################################## [ 116s] zlib-x86-arm ################################################## [ 117s] bzip2-libs ################################################## [ 117s] elfutils-libelf ################################################## [ 117s] libglib ################################################## [ 117s] bzip2-libs-x86-arm ################################################## [ 117s] pkg-config ################################################## [ 117s] xz-libs ################################################## [ 117s] ncurses-libs ################################################## [ 117s] ncurses ################################################## [ 117s] ncurses-base ################################################## [ 117s] libpython ################################################## [ 118s] python-base ################################################## [ 118s] libxml2 ################################################## [ 118s] binutils ################################################## [ 119s] xz-libs-x86-arm ################################################## [ 119s] elfutils-libelf-x86-arm ################################################## [ 119s] libgmodule ################################################## [ 119s] libfile ################################################## [ 120s] openssl ################################################## [ 120s] expat ################################################## [ 120s] libuuid ################################################## [ 120s] nspr ################################################## [ 120s] popt ################################################## [ 120s] sed ################################################## [ 120s] sqlite ################################################## [ 120s] popt-x86-arm ################################################## [ 121s] nspr-x86-arm ################################################## [ 121s] libfile-x86-arm ################################################## [ 121s] libblkid ################################################## [ 121s] libarchive ################################################## [ 121s] file ################################################## [ 121s] libxslt ################################################## [ 121s] python-xml ################################################## [ 121s] xz ################################################## [ 121s] elfutils-libs ################################################## [ 122s] elfutils ################################################## [ 122s] bzip2 ################################################## [ 122s] tar ################################################## [ 122s] libcap ################################################## [ 122s] libcap-x86-arm ################################################## [ 122s] diffutils ################################################## [ 122s] liblua ################################################## [ 122s] liblua-x86-arm ################################################## [ 122s] m4 ################################################## [ 122s] nss-softokn-freebl ################################################## [ 123s] nss ################################################## [ 123s] nss-sysinit ################################################## [ 123s] nss-x86-arm ################################################## [ 123s] rpm-libs ################################################## [ 123s] rpm-libs-x86-arm ################################################## [ 124s] patch ################################################## [ 124s] gawk ################################################## [ 124s] gzip ################################################## [ 124s] elfutils-libs-x86-arm ################################################## [ 124s] libarchive-x86-arm ################################################## [ 124s] openssl-x86-arm ################################################## [ 124s] libxml2-x86-arm ################################################## [ 124s] libpython-x86-arm ################################################## [ 124s] xz-lzma-compat ################################################## [ 125s] python-lxml ################################################## [ 125s] cmake ################################################## [ 125s] libmount ################################################## [ 125s] libgthread ################################################## [ 126s] cpp ################################################## [ 126s] libasan ################################################## [ 126s] libubsan ################################################## [ 126s] libatomic ################################################## [ 126s] libgomp ################################################## [ 126s] smack ################################################## [ 126s] smack-utils ################################################## [ 126s] libdlog ################################################## [ 126s] capi-base-common ################################################## [ 126s] capi-base-common-devel ################################################## [ 126s] cpio ################################################## [ 126s] db4 ################################################## [ 126s] fdupes ################################################## [ 126s] gdbm ################################################## [ 126s] perl-Pod-Escapes ################################################## [ 126s] perl-Compress-Raw-Zlib ################################################## [ 127s] perl-IO-Compress-Base ################################################## [ 127s] perl-Module-Pluggable ################################################## [ 127s] perl-Pod-Simple ################################################## [ 127s] perl-IO-Compress-Zlib ################################################## [ 127s] perl-libs ################################################## [ 133s] perl ################################################## [ 133s] perl-URI ################################################## [ 133s] autoconf ################################################## [ 133s] automake ################################################## [ 133s] perl-HTML-Tagset ################################################## [ 133s] perl-TimeDate ################################################## [ 134s] perl-Compress-Zlib ################################################## [ 135s] perl-libs-x86-arm ################################################## [ 136s] perl-x86-arm ################################################## [ 137s] perl-HTML-Parser ################################################## [ 137s] perl-libwww-perl ################################################## [ 137s] perl-XML-Parser ################################################## [ 137s] libffi ################################################## [ 137s] libgobject ################################################## [ 137s] gio-branding-upstream ################################################## [ 137s] libgio ################################################## [ 137s] glib2-tools ################################################## [ 137s] libitm ################################################## [ 138s] gcc ################################################## [ 139s] gcc-c++ ################################################## [ 150s] cross-armv7l-gcc-accel-x86-a################################################## [ 150s] "GCCVER: 4.9 GCCVER_NEW: 4.9 " [ 150s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 151s] readline ################################################## [ 152s] python ################################################## [ 152s] ruby ################################################## [ 153s] unzip ################################################## [ 154s] rpm-build ################################################## [ 155s] make ################################################## [ 163s] make-x86-arm ################################################## [ 164s] rpm-build-x86-arm ################################################## [ 165s] ruby-x86-arm ################################################## [ 166s] python-x86-arm ################################################## [ 172s] cross-armv7l-binutils-accel-################################################## [ 172s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/addr2line': File exists [ 172s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ar': File exists [ 172s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/as': File exists [ 172s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/c++filt': File exists [ 172s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/elfedit': File exists [ 173s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/gprof': File exists [ 173s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld': File exists [ 173s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld.bfd': File exists [ 173s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld.gold': File exists [ 173s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/nm': File exists [ 173s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/objcopy': File exists [ 173s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/objdump': File exists [ 173s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ranlib': File exists [ 173s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/readelf': File exists [ 173s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/size': File exists [ 173s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/strings': File exists [ 173s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/strip': File exists [ 173s] perl-XML-Parser-x86-arm ################################################## [ 173s] perl-HTML-Parser-x86-arm ################################################## [ 174s] build ################################################## [ 174s] libtool ################################################## [ 174s] fdupes-x86-arm ################################################## [ 174s] libdlog-devel ################################################## [ 176s] cmake-x86-arm ################################################## [ 177s] python-lxml-x86-arm ################################################## [ 177s] python-base-x86-arm ################################################## [ 178s] elfutils-x86-arm ################################################## [ 178s] gzip-x86-arm ################################################## [ 179s] gawk-x86-arm ################################################## [ 179s] patch-x86-arm ################################################## [ 181s] rpm-x86-arm ################################################## [ 181s] /bin/rpm.orig-arm already present - skipping. [ 181s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 181s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 181s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 181s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 181s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 181s] nss-softokn-freebl-x86-arm ################################################## [ 181s] m4-x86-arm ################################################## [ 181s] diffutils-x86-arm ################################################## [ 182s] tar-x86-arm ################################################## [ 182s] bzip2-x86-arm ################################################## [ 182s] python-xml-x86-arm ################################################## [ 182s] libxslt-x86-arm ################################################## [ 182s] mv: cannot stat `/usr/bin/xsltproc': No such file or directory [ 182s] file-x86-arm ################################################## [ 182s] sqlite-x86-arm ################################################## [ 182s] sed-x86-arm ################################################## [ 182s] expat-x86-arm ################################################## [ 182s] ncurses-libs-x86-arm ################################################## [ 182s] pkg-config-x86-arm ################################################## [ 183s] glib2-devel ################################################## [ 184s] util-linux ################################################## [ 184s] psmisc ################################################## [ 184s] pcre ################################################## [ 184s] patchelf ################################################## [ 184s] e2fsprogs-libs ################################################## [ 184s] net-tools ################################################## [ 185s] removing nis flags from //etc/nsswitch.conf... [ 185s] now finalizing build dir... [ 189s] build target is armv7l-tizen-linux [ 189s] ----------------------------------------------------------------- [ 189s] I have the following modifications for capi-network-serial.spec: [ 189s] 5c5 [ 189s] < Release: 0 [ 189s] --- [ 189s] > Release: %{?release_prefix:%{release_prefix}.}1.1 [ 189s] ----------------------------------------------------------------- [ 189s] ----- building capi-network-serial.spec (user abuild) [ 189s] ----------------------------------------------------------------- [ 189s] ----------------------------------------------------------------- [ 189s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:2.4:Mobile/target-TM1/67343869522121c18273ee4718c72eae-capi-network-serial' /home/abuild/rpmbuild/SOURCES/capi-network-serial.spec [ 189s] Building target platforms: armv7l-tizen-linux [ 189s] Building for target armv7l-tizen-linux [ 189s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.9J4E6o [ 189s] + umask 022 [ 189s] + cd /home/abuild/rpmbuild/BUILD [ 189s] + cd /home/abuild/rpmbuild/BUILD [ 189s] + rm -rf capi-network-serial-0.0.13 [ 189s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/capi-network-serial-0.0.13.tar.gz [ 189s] + /bin/tar -xf - [ 189s] + STATUS=0 [ 189s] + '[' 0 -ne 0 ']' [ 189s] + cd capi-network-serial-0.0.13 [ 189s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 189s] + exit 0 [ 189s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.FAj6y9 [ 189s] + umask 022 [ 189s] + cd /home/abuild/rpmbuild/BUILD [ 189s] + cd capi-network-serial-0.0.13 [ 189s] + LANG=C [ 189s] + export LANG [ 189s] + unset DISPLAY [ 189s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 189s] + export CFLAGS [ 189s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 189s] + export CXXFLAGS [ 189s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 189s] + export FFLAGS [ 189s] + LD_AS_NEEDED=1 [ 189s] + export LD_AS_NEEDED [ 189s] + export 'CFLAGS=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DTIZEN_ENGINEER_MODE' [ 189s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DTIZEN_ENGINEER_MODE' [ 189s] + export 'CXXFLAGS=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DTIZEN_ENGINEER_MODE' [ 189s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DTIZEN_ENGINEER_MODE' [ 189s] + export 'FFLAGS=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir -DTIZEN_ENGINEER_MODE' [ 189s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir -DTIZEN_ENGINEER_MODE' [ 189s] ++ echo 0.0.13 [ 189s] ++ awk 'BEGIN {FS="."}{print $1}' [ 189s] + MAJORVER=0 [ 189s] + cmake . -DCMAKE_INSTALL_PREFIX=/usr -DFULLVER=0.0.13 -DMAJORVER=0 [ 189s] -- The C compiler identification is GNU [ 189s] -- The CXX compiler identification is GNU [ 189s] -- Check for working C compiler: /usr/bin/gcc [ 189s] -- Check for working C compiler: /usr/bin/gcc -- works [ 189s] -- Detecting C compiler ABI info [ 190s] -- Detecting C compiler ABI info - done [ 190s] -- Check for working CXX compiler: /usr/bin/c++ [ 190s] -- Check for working CXX compiler: /usr/bin/c++ -- works [ 190s] -- Detecting CXX compiler ABI info [ 190s] -- Detecting CXX compiler ABI info - done [ 190s] -- checking for module 'dlog glib-2.0 capi-base-common gio-2.0' [ 190s] -- found dlog glib-2.0 capi-base-common gio-2.0, version 1.0;2.44.1;0.2.2;2.44.1 [ 190s] -- Configuring done [ 190s] -- Generating done [ 190s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.13 [ 190s] + make -j4 [ 190s] Scanning dependencies of target capi-network-serial [ 190s] [100%] Building C object CMakeFiles/capi-network-serial.dir/src/serial.c.o [ 190s] Linking C shared library libcapi-network-serial.so [ 190s] [100%] Built target capi-network-serial [ 190s] + exit 0 [ 190s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.mNKaDX [ 190s] + umask 022 [ 190s] + cd /home/abuild/rpmbuild/BUILD [ 190s] + cd capi-network-serial-0.0.13 [ 190s] + LANG=C [ 190s] + export LANG [ 190s] + unset DISPLAY [ 190s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.13-1.1.arm [ 190s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.13-1.1.arm [ 190s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.13-1.1.arm [ 190s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.13-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.13-1.1.arm install [ 190s] [100%] Built target capi-network-serial [ 190s] Install the project... [ 190s] -- Install configuration: "" [ 190s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.13-1.1.arm/usr/lib/libcapi-network-serial.so.0.0.13 [ 190s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.13-1.1.arm/usr/lib/libcapi-network-serial.so.0 [ 190s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.13-1.1.arm/usr/lib/libcapi-network-serial.so [ 190s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.13-1.1.arm/usr/include/network [ 190s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.13-1.1.arm/usr/include/network/serial.h [ 190s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.13-1.1.arm/usr/lib/pkgconfig/capi-network-serial.pc [ 190s] + rm -f /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.13-1.1.arm/usr/share/info/dir [ 190s] + find /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.13-1.1.arm -regex '.*\.la$' [ 190s] + xargs rm -f -- [ 190s] + find /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.13-1.1.arm -regex '.*\.a$' [ 190s] + xargs rm -f -- [ 190s] + install -D -m 0644 LICENSE /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.13-1.1.arm/usr/share/license/capi-network-serial [ 190s] + install -D -m 0644 LICENSE /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.13-1.1.arm/usr/share/license/capi-network-serial-devel [ 190s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.13 [ 190s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.13-1.1.arm/usr/lib/libcapi-network-serial.so.0.0.13 [ 190s] symlinked /usr/lib/debug/usr/lib/libcapi-network-serial.so.0.0.13.debug to /usr/lib/debug/usr/lib/libcapi-network-serial.so.0.debug [ 190s] symlinked /usr/lib/debug/usr/lib/libcapi-network-serial.so.0.0.13.debug to /usr/lib/debug/usr/lib/libcapi-network-serial.so.debug [ 190s] 36 blocks [ 190s] + /usr/lib/rpm/check-buildroot [ 190s] + /usr/lib/rpm//brp-compress [ 190s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 190s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 190s] + /usr/lib/rpm/brp-python-hardlink [ 190s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.13-1.1.arm [ 190s] Processing files: capi-network-serial-0.0.13-1.1.armv7l [ 190s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 190s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 190s] [ 190s] Provides: libcapi-network-serial.so.0 [ 190s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 190s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 190s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 190s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 190s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libdlog.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libgio-2.0.so.0 libglib-2.0.so.0 libpthread.so.0 libpthread.so.0(GLIBC_2.4) rtld(GNU_HASH) [ 190s] Processing files: capi-network-serial-debuginfo-0.0.13-1.1.armv7l [ 190s] Processing files: capi-network-serial-debugsource-0.0.13-1.1.armv7l [ 190s] Processing files: capi-network-serial-devel-0.0.13-1.1.armv7l [ 190s] Provides: pkgconfig(capi-network-serial) [ 190s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 190s] Requires: /usr/bin/pkg-config libcapi-network-serial.so.0 pkgconfig(capi-base-common) [ 190s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.13-1.1.arm [ 190s] Wrote: /home/abuild/rpmbuild/SRPMS/capi-network-serial-0.0.13-1.1.src.rpm [ 190s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-network-serial-0.0.13-1.1.armv7l.rpm [ 190s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-network-serial-debuginfo-0.0.13-1.1.armv7l.rpm [ 190s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-network-serial-debugsource-0.0.13-1.1.armv7l.rpm [ 190s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-network-serial-devel-0.0.13-1.1.armv7l.rpm [ 190s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.w0EQGZ [ 190s] + umask 022 [ 190s] + cd /home/abuild/rpmbuild/BUILD [ 190s] + cd capi-network-serial-0.0.13 [ 190s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.13-1.1.arm [ 190s] + exit 0 [ 191s] ... checking for files with abuild user/group [ 191s] ... creating baselibs [ 191s] ... saving built statistics [ 191s] ... saving built packages [ 191s] /home/abuild/rpmbuild/RPMS/armv7l/capi-network-serial-0.0.13-1.1.armv7l.rpm [ 191s] /home/abuild/rpmbuild/RPMS/armv7l/capi-network-serial-debuginfo-0.0.13-1.1.armv7l.rpm [ 191s] /home/abuild/rpmbuild/RPMS/armv7l/capi-network-serial-debugsource-0.0.13-1.1.armv7l.rpm [ 191s] /home/abuild/rpmbuild/RPMS/armv7l/capi-network-serial-devel-0.0.13-1.1.armv7l.rpm [ 191s] /home/abuild/rpmbuild/SRPMS/capi-network-serial-0.0.13-1.1.src.rpm [ 191s] /home/abuild/rpmbuild/OTHER/_statistics [ 191s] [ 191s] w25 finished "build capi-network-serial.spec" at Thu Oct 29 04:57:15 UTC 2015. [ 191s] [ 192s] /.build/build: line 368: 210 Killed background_monitor_process [ 194s] [ 179.644985] SysRq : Power Off [ 194s] [ 179.652517] Power down. [ 194s] build: extracting built packages... [ 195s] capi-network-serial-0.0.13-1.1.armv7l.rpm [ 195s] capi-network-serial-debuginfo-0.0.13-1.1.armv7l.rpm [ 195s] capi-network-serial-debugsource-0.0.13-1.1.armv7l.rpm [ 195s] capi-network-serial-devel-0.0.13-1.1.armv7l.rpm [ 195s] capi-network-serial-0.0.13-1.1.src.rpm [ 195s] _statistics Retried build at Mon May 30 15:05:34 2016 returned same result, skipped