[ 0s] Using BUILD_ROOT=/srv/build/root_7/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_7/root [ 0s] [ 0s] [ 0s] w12 started "build _service:gbs:capi-system-device.spec" at Mon May 30 22:07:29 UTC 2016. [ 0s] [ 0s] Building capi-system-device for project 'Tizen:2.4:Mobile' repository 'target-TM1' arch 'armv7l' srcmd5 '5b64c29563db171c81bc51aab4cef86f' [ 0s] [ 0s] processing specfile /srv/build/root_7/.build-srcdir/_service:gbs:capi-system-device.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_7/.build-srcdir/_service:gbs:capi-system-device.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/7/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_7/.build.rpmlist /srv/build/root_7/.build-srcdir/_service:gbs:capi-system-device.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 0s] [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: glibc -> glibc-common -> bash [ 0s] breaking dependency glibc-common -> bash [ 0s] cycle: glibc -> glibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: glibc -> glibc-common -> coreutils [ 0s] breaking dependency coreutils -> glibc [ 0s] cycle: glibc -> glibc-common -> coreutils -> libacl [ 0s] breaking dependency libacl -> glibc [ 0s] cycle: glibc -> glibc-common -> coreutils -> libacl -> libattr [ 0s] breaking dependency libattr -> glibc [ 0s] cycle: libgcc -> glibc -> glibc-common -> coreutils -> libacl -> libattr [ 0s] breaking dependency libacl -> libattr [ 0s] cycle: libgcc -> glibc -> glibc-common -> coreutils -> libacl [ 0s] breaking dependency glibc-common -> coreutils [ 0s] cycle: glibc -> glibc-common [ 0s] breaking dependency glibc -> glibc-common [ 0s] cycle: libgcc -> glibc [ 0s] breaking dependency libgcc -> glibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/52] preinstalling tizen-release... [ 0s] [2/52] preinstalling libgcc... [ 0s] [3/52] preinstalling setup... [ 0s] [4/52] preinstalling filesystem... [ 0s] [5/52] preinstalling glibc... [ 0s] [6/52] preinstalling libattr... [ 0s] [7/52] preinstalling libacl... [ 0s] [8/52] preinstalling bash... [ 0s] [9/52] preinstalling bzip2-libs... [ 0s] [10/52] preinstalling diffutils... [ 0s] [11/52] preinstalling elfutils-libelf... [ 0s] [12/52] preinstalling libcap... [ 0s] [13/52] preinstalling liblua... [ 0s] [14/52] preinstalling libstdc++... [ 0s] [15/52] preinstalling ncurses-libs... [ 0s] [16/52] preinstalling nspr... [ 0s] [17/52] preinstalling nss-softokn-freebl... [ 0s] [18/52] preinstalling popt... [ 0s] [19/52] preinstalling readline... [ 0s] [20/52] preinstalling sed... [ 0s] [21/52] preinstalling sqlite... [ 0s] [22/52] preinstalling xz-libs... [ 0s] [23/52] preinstalling zlib... [ 0s] [24/52] preinstalling glibc-common... [ 0s] [25/52] preinstalling tar... [ 0s] [26/52] preinstalling coreutils... [ 0s] [27/52] preinstalling qemu-linux-user-x86-arm... [ 1s] [28/52] preinstalling tizen-accelerator... [ 1s] [29/52] preinstalling libfile... [ 1s] [30/52] preinstalling bzip2... [ 1s] [31/52] preinstalling nss... [ 1s] [32/52] preinstalling bzip2-libs-x86-arm... [ 1s] [33/52] preinstalling elfutils-libelf-x86-arm... [ 1s] [34/52] preinstalling glibc-x86-arm... [ 1s] [35/52] preinstalling libacl-x86-arm... [ 1s] [36/52] preinstalling libattr-x86-arm... [ 1s] [37/52] preinstalling libcap-x86-arm... [ 1s] [38/52] preinstalling libgcc-x86-arm... [ 1s] [39/52] preinstalling liblua-x86-arm... [ 1s] [40/52] preinstalling ncurses-libs-x86-arm... [ 1s] [41/52] preinstalling nspr-x86-arm... [ 1s] [42/52] preinstalling nss-softokn-freebl-x86-arm... [ 1s] [43/52] preinstalling nss-x86-arm... [ 1s] [44/52] preinstalling popt-x86-arm... [ 1s] [45/52] preinstalling sqlite-x86-arm... [ 1s] [46/52] preinstalling xz-libs-x86-arm... [ 1s] [47/52] preinstalling zlib-x86-arm... [ 1s] [48/52] preinstalling rpm-libs... [ 1s] [49/52] preinstalling bash-x86-arm... [ 1s] [50/52] preinstalling rpm-libs-x86-arm... [ 1s] [51/52] preinstalling rpm... [ 1s] [52/52] preinstalling rpm-x86-arm... [ 1s] [ 1s] cycle: perl -> perl-libs [ 1s] breaking dependency perl-libs -> perl [ 1s] [1/8] preinstalling e2fsprogs-libs... [ 1s] [2/8] preinstalling libpcre... [ 1s] [3/8] preinstalling libuuid... [ 1s] [4/8] preinstalling grep... [ 1s] [5/8] preinstalling libblkid... [ 1s] [6/8] preinstalling util-linux... [ 1s] [7/8] preinstalling perl-libs... [ 1s] [8/8] preinstalling perl... [ 2s] copying packages... [ 2s] reordering...cycle: bash -> glibc -> glibc-common [ 2s] breaking dependency glibc-common -> bash [ 2s] cycle: bash -> glibc -> glibc-common -> coreutils [ 2s] breaking dependency glibc-common -> coreutils [ 2s] cycle: glibc -> glibc-common -> findutils [ 2s] breaking dependency glibc-common -> findutils [ 2s] cycle: glibc -> glibc-common [ 2s] breaking dependency glibc-common -> glibc [ 2s] cycle: glibc -> glibc-common -> grep [ 2s] breaking dependency grep -> glibc [ 2s] cycle: glibc -> glibc-common -> grep -> libgcc [ 2s] breaking dependency grep -> libgcc [ 2s] cycle: glibc -> glibc-common -> grep -> libpcre [ 2s] breaking dependency libpcre -> glibc [ 2s] cycle: glibc -> glibc-common -> grep -> libpcre -> libgcc [ 2s] breaking dependency libpcre -> libgcc [ 2s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++ [ 2s] breaking dependency libstdc++ -> glibc [ 2s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 2s] breaking dependency glibc -> glibc-common [ 2s] cycle: glibc -> libgcc [ 2s] breaking dependency libgcc -> glibc [ 2s] cycle: filesystem -> setup [ 2s] breaking dependency setup -> filesystem [ 2s] cycle: gio-branding-upstream -> libgio [ 2s] breaking dependency libgio -> gio-branding-upstream [ 2s] cycle: ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses [ 2s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses-base [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl -> perl-libs [ 2s] cycle: perl -> perl-IO-Compress-Zlib [ 2s] breaking dependency perl -> perl-IO-Compress-Zlib [ 2s] cycle: perl -> perl-IO-Compress-Base [ 2s] breaking dependency perl -> perl-IO-Compress-Base [ 2s] cycle: perl -> perl-Module-Pluggable [ 2s] breaking dependency perl -> perl-Module-Pluggable [ 2s] cycle: perl -> perl-Pod-Simple [ 2s] breaking dependency perl -> perl-Pod-Simple [ 2s] cycle: dbus-libs -> dbus [ 2s] breaking dependency dbus -> dbus-libs [ 2s] cycle: nss -> nss-sysinit [ 2s] breaking dependency nss -> nss-sysinit [ 2s] cycle: rpm-libs -> rpm [ 2s] breaking dependency rpm-libs -> rpm [ 2s] done [ 3s] booting kvm ... [ 3s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 10000 -drive file=/srv/build/root_7/root,if=virtio,cache=none -drive file=/srv/build/root_7/root,if=ide,index=0,cache=none -drive file=/srv/build/root_7/swap,if=virtio,cache=none -smp 4 [ 4s] doing fast boot [ 4s] Creating device nodes with udev [ 4s] Waiting for device /dev/vda to appear: ok [ 4s] fsck from util-linux 2.21.2 [ 4s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 4s] /dev/vda: clean, 4749/2392064 files, 226029/9568256 blocks [ 4s] fsck succeeded. Mounting root device read-write. [ 4s] Mounting root /dev/vda [ 4s] mount -o rw -t ext4 /dev/vda /root [ 4s] replacing /etc/mtab with symlink to /proc/self/mounts [ 4s] /.build/qemu-reg: line 9: interpreter '/usr/bin/qemu-armeb-binfmt' not found, ignoring [ 4s] /.build/qemu-reg: line 10: interpreter '/usr/bin/qemu-ppc-binfmt' not found, ignoring [ 4s] /.build/qemu-reg: line 11: interpreter '/usr/bin/qemu-mips-binfmt' not found, ignoring [ 4s] /.build/qemu-reg: line 12: interpreter '/usr/bin/qemu-mipsel-binfmt' not found, ignoring [ 4s] /.build/qemu-reg: line 18: interpreter '/usr/bin/qemu-sh4-binfmt' not found, ignoring [ 4s] /.build/qemu-reg: line 19: interpreter '/usr/bin/qemu-sh4eb-binfmt' not found, ignoring [ 5s] 2nd stage started in virtual machine [ 5s] machine type: armv7l [ 5s] swapon on /dev/vdb [ 5s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 5s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 5s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 5s] logging output to //.build.log... [ 5s] processing specfile /.build-srcdir/_service:gbs:capi-system-device.spec ... [ 5s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:capi-system-device.spec build rpmlint-Factory ... [ 6s] running rpm-x86-arm postinstall script [ 6s] running rpm-libs-x86-arm postinstall script [ 6s] running tizen-accelerator postinstall script [ 6s] running glibc-x86-arm postinstall script [ 6s] running bash-x86-arm postinstall script [ 7s] initializing rpm db... [ 11s] [1/201] cumulate cross-armv7l-platformfile-0.0.1-1.1 [ 11s] [2/201] cumulate kernel-headers-3.4.91-1.1 [ 11s] [3/201] cumulate libX11-common-1.6.2-1.1 [ 11s] [4/201] cumulate tizen-release-2.2.0-1.1 [ 11s] [5/201] cumulate tzdata-2014j-1.1 [ 11s] [6/201] cumulate libgcc-4.9.2-2015.02.1.11 [ 11s] [7/201] cumulate setup-0.2-1.1 [ 11s] [8/201] cumulate filesystem-0.1-1.1 [ 11s] [9/201] cumulate glibc-2.20-2014.11.1.10 [ 11s] [10/201] cumulate libstdc++-4.9.2-2015.02.1.11 [ 11s] [11/201] cumulate libatomic-4.9.2-2015.02.1.11 [ 11s] [12/201] cumulate libgomp-4.9.2-2015.02.1.11 [ 11s] [13/201] cumulate openssl-1.0.1p-1.5 [ 11s] [14/201] cumulate smack-1.0+s14-1.8 [ 11s] [15/201] cumulate bash-4.1-1.6 [ 11s] [16/201] cumulate bzip2-libs-1.0.5-1.8 [ 11s] [17/201] cumulate capi-base-common-0.2.2-1.1 [ 11s] [18/201] cumulate cpio-2.8-1.6 [ 11s] [19/201] cumulate db4-4.8.30-1.8 [ 11s] [20/201] cumulate diffutils-3.0-1.6 [ 11s] [21/201] cumulate e2fsprogs-libs-1.41.9-1.4 [ 12s] [22/201] cumulate elfutils-libelf-0.152-1.12 [ 12s] [23/201] cumulate expat-2.0.1-1.8 [ 12s] [24/201] cumulate fdupes-1.40-1.5 [ 12s] [25/201] cumulate findutils-4.2.31-1.5 [ 12s] [26/201] cumulate gdbm-1.8.3-1.12 [ 12s] [27/201] cumulate iniparser-3.1-1.1 [ 12s] [28/201] cumulate libXau-1.0.8-1.1 [ 12s] [29/201] cumulate libattr-2.4.44-1.8 [ 12s] [30/201] cumulate libffi-3.1-1.1 [ 12s] [31/201] cumulate libglib-2.44.1-2.1 [ 12s] [32/201] cumulate libitm-4.9.2-2015.02.1.11 [ 12s] [33/201] cumulate liblua-5.1.4-1.6 [ 12s] [34/201] cumulate libuuid-2.20.2-1.4 [ 12s] [35/201] cumulate m4-1.4.14-1.5 [ 12s] [36/201] cumulate net-tools-1.60-2.6 [ 12s] [37/201] cumulate nspr-4.9-1.9 [ 12s] [38/201] cumulate nss-softokn-freebl-3.12.9-1.17 [ 12s] [39/201] cumulate patch-2.6-1.6 [ 12s] [40/201] cumulate pkg-config-0.25-2.6 [ 12s] [41/201] cumulate popt-1.16-1.8 [ 12s] [42/201] cumulate readline-5.2-1.6 [ 12s] [43/201] cumulate ruby-1.9.2-1.6 [ 12s] [44/201] cumulate sed-4.1.5-1.5 [ 12s] [45/201] cumulate sqlite-3.8.10.2-1.8 [ 12s] [46/201] cumulate xz-libs-5.0.3-1.8 [ 12s] [47/201] cumulate zlib-1.2.8-1.8 [ 12s] [48/201] cumulate libasan-4.9.2-2015.02.1.11 [ 12s] [49/201] cumulate libpcre-7.7-1.25 [ 12s] [50/201] cumulate libubsan-4.9.2-2015.02.1.11 [ 12s] [51/201] cumulate patchelf-0.5.svn20809-1.5 [ 12s] [52/201] cumulate ncurses-libs-5.7-1.8 [ 12s] [53/201] cumulate build-compare-2009.10.14-1.6 [ 12s] [54/201] cumulate qemu-linux-user-x86-arm-2.2.0-4.1.1 [ 12s] [55/201] cumulate capi-base-common-devel-0.2.2-1.1 [ 12s] [56/201] cumulate cpp-4.9.2-2015.02.1.11 [ 12s] [57/201] cumulate glibc-headers-2.20-2014.11.1.10 [ 12s] [58/201] cumulate libcap-2.21-1.6 [ 12s] [59/201] cumulate unzip-6.0-1.12 [ 12s] [60/201] cumulate grep-2.5.1a-1.5 [ 12s] [61/201] cumulate libacl-2.2.49-1.5 [ 12s] [62/201] cumulate libfile-5.04-1.7 [ 12s] [63/201] cumulate libgmodule-2.44.1-2.1 [ 12s] [64/201] cumulate libgthread-2.44.1-2.1 [ 12s] [65/201] cumulate libpython-2.7.1-1.5 [ 12s] [66/201] cumulate libxcb-1.10.0-1.1 [ 12s] [67/201] cumulate libxml2-2.9.2-1.3 [ 12s] [68/201] cumulate make-3.82-154.1.6 [ 12s] [69/201] cumulate ncurses-5.7-1.8 [ 12s] [70/201] cumulate pcre-7.7-1.25 [ 12s] [71/201] cumulate psmisc-22.20-1.6 [ 12s] [72/201] cumulate smack-utils-1.0+s14-1.8 [ 12s] [73/201] cumulate binutils-2.25.0-2015.01.1.8 [ 12s] [74/201] cumulate bzip2-1.0.5-1.8 [ 12s] [75/201] cumulate kmod-libs-15-1.1 [ 12s] [76/201] cumulate libblkid-2.20.2-1.4 [ 12s] [77/201] cumulate libgobject-2.44.1-2.1 [ 12s] [78/201] cumulate xz-5.0.3-1.8 [ 12s] [79/201] cumulate elfutils-libs-0.152-1.12 [ 12s] [80/201] cumulate nss-3.12.9-1.17 [ 12s] [81/201] cumulate perl-5.12.1-1.25 [ 12s] [82/201] cumulate ncurses-base-5.7-1.8 [ 12s] [83/201] cumulate perl-HTML-Tagset-3.20-1.1 [ 12s] [84/201] cumulate perl-IO-Compress-Base-2.008-1.25 [ 12s] [85/201] cumulate perl-Module-Pluggable-3.60-1.25 [ 13s] [86/201] cumulate perl-Pod-Escapes-1.04-1.25 [ 13s] [87/201] cumulate perl-TimeDate-1.20-1.1 [ 13s] [88/201] cumulate perl-URI-1.54-1.1 [ 13s] [89/201] cumulate glibc-devel-2.20-2014.11.1.10 [ 13s] [90/201] cumulate vconf-internal-keys-devel-0.0.153-3.1 [ 13s] [91/201] cumulate file-5.04-1.7 [ 13s] [92/201] cumulate libxslt-1.1.28-1.2 [ 13s] [93/201] cumulate perl-Compress-Raw-Zlib-2.008-1.25 [ 13s] [94/201] cumulate perl-libs-5.12.1-1.25 [ 13s] [95/201] cumulate tar-1.17-1.6 [ 13s] [96/201] cumulate coreutils-6.9-1.6 [ 13s] [97/201] cumulate libX11-1.6.2-1.1 [ 13s] [98/201] cumulate libdlog-0.4.1-1.1 [ 13s] [99/201] cumulate libmount-2.20.2-1.4 [ 13s] [100/201] cumulate xz-lzma-compat-5.0.3-1.8 [ 13s] [101/201] cumulate elfutils-0.152-1.12 [ 13s] [102/201] cumulate nss-sysinit-3.12.9-1.17 [ 13s] [103/201] cumulate python-base-2.7.1-1.5 [ 13s] [104/201] cumulate glibc-common-2.20-2014.11.1.10 [ 13s] [105/201] cumulate libgio-2.44.1-2.1 [ 13s] [106/201] cumulate libarchive-2.8.3-1.2 [ 13s] [107/201] cumulate rpm-libs-4.9.1-4.3.1.10 [ 13s] [108/201] cumulate gio-branding-upstream-2.44.1-2.1 [ 13s] [109/201] cumulate libstdc++-devel-4.9.2-2015.02.1.11 [ 13s] [110/201] cumulate perl-Pod-Simple-3.07-1.25 [ 13s] [111/201] cumulate tizen-accelerator-1.0.1-1.1 [ 13s] [112/201] cumulate libdlog-devel-0.4.1-1.1 [ 13s] [113/201] cumulate perl-IO-Compress-Zlib-2.008-1.25 [ 13s] [114/201] cumulate gawk-3.1.5-1.6 [ 13s] [115/201] cumulate gzip-1.3.12-1.6 [ 13s] [116/201] cumulate pam-1.1.5-1.5 [ 13s] [117/201] cumulate perl-HTML-Parser-3.65-1.5 [ 13s] [118/201] cumulate python-xml-2.7.1-1.5 [ 13s] [119/201] cumulate autoconf-2.68-1.1 [ 13s] [120/201] cumulate build-2011.01.10a-1.1 [ 13s] [121/201] installing rpm-4.9.1-4.3.1.10 [ 13s] [122/201] cumulate python-lxml-2.2.3-1.2 [ 13s] [123/201] cumulate capi-system-info-0.2.0-1.2 [ 13s] [124/201] cumulate dbus-1.8.16-2.1 [ 13s] [125/201] cumulate glib2-tools-2.44.1-2.1 [ 13s] [126/201] cumulate util-linux-2.20.2-1.4 [ 13s] [127/201] cumulate cmake-2.8.5-1.1.2 [ 13s] [128/201] cumulate python-2.7.1-1.3 [ 14s] [129/201] cumulate gcc-4.9.2-2015.02.1.11 [ 14s] [130/201] cumulate automake-1.11.1-1.1 [ 14s] [131/201] cumulate bzip2-libs-x86-arm-1.0.5-9.1.4 [ 14s] [132/201] cumulate capi-system-info-devel-0.2.0-1.2 [ 14s] [133/201] cumulate dbus-libs-1.8.16-2.1 [ 14s] [134/201] cumulate elfutils-libelf-x86-arm-0.152-9.1.4 [ 14s] [135/201] cumulate elfutils-libs-x86-arm-0.152-9.1.4 [ 14s] [136/201] cumulate expat-x86-arm-2.0.1-1.4 [ 14s] [137/201] cumulate glibc-x86-arm-2.20-9.1.5 [ 14s] [138/201] cumulate libacl-x86-arm-2.2.49-9.1.4 [ 14s] [139/201] cumulate libarchive-x86-arm-2.8.3-1.3 [ 14s] [140/201] cumulate libattr-x86-arm-2.4.44-9.1.4 [ 14s] [141/201] cumulate libcap-x86-arm-2.21-9.1.4 [ 14s] [142/201] cumulate libfile-x86-arm-5.04-9.1.4 [ 14s] [143/201] cumulate libgcc-x86-arm-4.9.2-9.1.4 [ 14s] [144/201] cumulate liblua-x86-arm-5.1.4-9.1.3 [ 14s] [145/201] cumulate libpython-x86-arm-2.7.1-9.1.3 [ 14s] [146/201] cumulate libstdc++-x86-arm-4.9.2-9.1.4 [ 14s] [147/201] cumulate libxml2-x86-arm-2.9.2-9.1.3 [ 14s] [148/201] cumulate libxslt-x86-arm-1.1.28-9.1.3 [ 14s] [149/201] cumulate ncurses-libs-x86-arm-5.7-9.1.3 [ 14s] [150/201] cumulate nspr-x86-arm-4.9-9.1.5 [ 14s] [151/201] cumulate nss-softokn-freebl-x86-arm-3.12.9-9.1.5 [ 14s] [152/201] cumulate nss-x86-arm-3.12.9-9.1.5 [ 14s] [153/201] cumulate openssl-x86-arm-1.0.1p-9.1.3 [ 14s] [154/201] cumulate perl-libs-x86-arm-5.12.1-9.1.5 [ 14s] [155/201] cumulate popt-x86-arm-1.16-9.1.4 [ 14s] [156/201] cumulate python-lxml-x86-arm-2.2.3-9.1.3 [ 14s] [157/201] cumulate python-x86-arm-2.7.1-9.1.3 [ 14s] [158/201] cumulate python-xml-x86-arm-2.7.1-9.1.3 [ 14s] [159/201] cumulate rpm-libs-x86-arm-4.9.1-9.1.4 [ 14s] [160/201] cumulate sqlite-x86-arm-3.8.10.2-9.1.3 [ 14s] [161/201] cumulate xz-libs-x86-arm-5.0.3-9.1.4 [ 14s] [162/201] cumulate zlib-x86-arm-1.2.8-9.1.4 [ 14s] [163/201] cumulate gcc-c++-4.9.2-2015.02.1.11 [ 14s] [164/201] cumulate perl-Compress-Zlib-2.008-1.25 [ 14s] [165/201] cumulate systemd-libs-216-1.3 [ 14s] [166/201] cumulate glib2-devel-2.44.1-2.1 [ 14s] [167/201] cumulate rpm-build-4.9.1-4.3.1.10 [ 14s] [168/201] cumulate bash-x86-arm-4.1-9.1.4 [ 14s] [169/201] cumulate diffutils-x86-arm-3.0-9.1.4 [ 14s] [170/201] cumulate fdupes-x86-arm-1.40-9.1.4 [ 14s] [171/201] cumulate findutils-x86-arm-4.2.31-9.1.4 [ 14s] [172/201] cumulate gawk-x86-arm-3.1.5-9.1.3 [ 14s] [173/201] cumulate gzip-x86-arm-1.3.12-9.1.4 [ 14s] [174/201] cumulate libtool-2.2.6b-1.8 [ 14s] [175/201] cumulate m4-x86-arm-1.4.14-9.1.4 [ 14s] [176/201] cumulate make-x86-arm-3.82-9.1.3 [ 14s] [177/201] cumulate patch-x86-arm-2.6-9.1.4 [ 14s] [178/201] cumulate perl-libwww-perl-5.836-1.1 [ 14s] [179/201] cumulate pkg-config-x86-arm-0.25-9.1.4 [ 14s] [180/201] cumulate ruby-x86-arm-1.9.2-9.1.4 [ 14s] [181/201] cumulate sed-x86-arm-4.1.5-9.1.4 [ 14s] [182/201] cumulate bzip2-x86-arm-1.0.5-1.4 [ 14s] [183/201] cumulate perl-x86-arm-5.12.1-9.1.5 [ 14s] [184/201] cumulate python-base-x86-arm-2.7.1-9.1.3 [ 14s] [185/201] cumulate coreutils-x86-arm-6.9-9.1.4 [ 15s] [186/201] cumulate cross-armv7l-gcc-accel-x86-armv7l-4.9.2-2015.02.1.6 [ 15s] [187/201] cumulate file-x86-arm-5.04-9.1.4 [ 15s] [188/201] cumulate tar-x86-arm-1.17-9.1.4 [ 15s] [189/201] cumulate elfutils-x86-arm-0.152-9.1.4 [ 15s] [190/201] cumulate systemd-216-1.3 [ 15s] [191/201] cumulate cmake-x86-arm-2.8.5-1.3 [ 15s] [192/201] cumulate rpm-x86-arm-4.9.1-9.1.4 [ 15s] [193/201] cumulate rpm-build-x86-arm-4.9.1-9.1.4 [ 15s] [194/201] cumulate perl-HTML-Parser-x86-arm-3.65-9.1.3 [ 15s] [195/201] cumulate cross-armv7l-binutils-accel-x86-armv7l-2.25.0-2015.01.1.3 [ 15s] [196/201] cumulate perl-XML-Parser-2.36-1.6 [ 15s] [197/201] cumulate vconf-0.2.84-2.1 [ 15s] [198/201] cumulate vconf-keys-devel-0.2.84-2.1 [ 15s] [199/201] cumulate perl-XML-Parser-x86-arm-2.36-9.1.3 [ 15s] [200/201] cumulate vconf-devel-0.2.84-2.1 [ 15s] [201/201] now installing cumulated packages [ 15s] Preparing... ################################################## [ 15s] setup ################################################## [ 15s] filesystem ################################################## [ 15s] tzdata ################################################## [ 15s] libX11-common ################################################## [ 15s] tizen-release ################################################## [ 15s] kernel-headers ################################################## [ 15s] cross-armv7l-platformfile ################################################## [ 15s] bash ################################################## [ 15s] findutils ################################################## [ 15s] grep ################################################## [ 15s] coreutils ################################################## [ 15s] glibc-common ################################################## [ 15s] libgcc ################################################## [ 15s] /sbin/ldconfig: relative path `1' used to build cache [ 15s] warning: %post(libgcc-4.9.2-2015.02.1.11.armv7l) scriptlet failed, exit status 1 [ 16s] glibc ################################################## [ 16s] libstdc++ ################################################## [ 16s] libattr ################################################## [ 16s] libacl ################################################## [ 16s] libpcre ################################################## [ 16s] tizen-accelerator ################################################## [ 16s] glibc-x86-arm ################################################## [ 16s] libattr-x86-arm ################################################## [ 16s] libacl-x86-arm ################################################## [ 16s] libgcc-x86-arm ################################################## [ 16s] libstdc++-x86-arm ################################################## [ 17s] glibc-headers ################################################## [ 17s] glibc-devel ################################################## [ 17s] libstdc++-devel ################################################## [ 17s] coreutils-x86-arm ################################################## [ 19s] bash-x86-arm ################################################## [ 19s] findutils-x86-arm ################################################## [ 19s] build-compare ################################################## [ 20s] qemu-linux-user-x86-arm ################################################## [ 20s] zlib ################################################## [ 20s] libglib ################################################## [ 20s] pkg-config ################################################## [ 20s] xz-libs ################################################## [ 20s] zlib-x86-arm ################################################## [ 20s] bzip2-libs ################################################## [ 20s] elfutils-libelf ################################################## [ 20s] bzip2-libs-x86-arm ################################################## [ 20s] libxml2 ################################################## [ 20s] ncurses-libs ################################################## [ 20s] ncurses ################################################## [ 20s] ncurses-base ################################################## [ 20s] libpython ################################################## [ 20s] python-base ################################################## [ 20s] binutils ################################################## [ 20s] libcap ################################################## [ 20s] openssl ################################################## [ 20s] expat ################################################## [ 20s] elfutils-libelf-x86-arm ################################################## [ 20s] xz-libs-x86-arm ################################################## [ 20s] libgmodule ################################################## [ 20s] libfile ################################################## [ 20s] smack ################################################## [ 20s] libuuid ################################################## [ 20s] libblkid ################################################## [ 20s] nspr ################################################## [ 20s] popt ################################################## [ 20s] sed ################################################## [ 20s] sqlite ################################################## [ 20s] popt-x86-arm ################################################## [ 20s] nspr-x86-arm ################################################## [ 20s] libfile-x86-arm ################################################## [ 20s] libcap-x86-arm ################################################## [ 20s] file ################################################## [ 20s] libarchive ################################################## [ 20s] python-xml ################################################## [ 20s] libxslt ################################################## [ 20s] elfutils-libs ################################################## [ 20s] elfutils ################################################## [ 20s] bzip2 ################################################## [ 20s] xz ################################################## [ 20s] tar ################################################## [ 20s] diffutils ################################################## [ 20s] liblua ################################################## [ 20s] liblua-x86-arm ################################################## [ 20s] m4 ################################################## [ 20s] nss-softokn-freebl ################################################## [ 20s] nss ################################################## [ 20s] nss-sysinit ################################################## [ 21s] nss-x86-arm ################################################## [ 21s] rpm-libs ################################################## [ 21s] rpm-libs-x86-arm ################################################## [ 21s] patch ################################################## [ 21s] gawk ################################################## [ 21s] gzip ################################################## [ 21s] pam ################################################## [ 21s] elfutils-libs-x86-arm ################################################## [ 21s] libarchive-x86-arm ################################################## [ 21s] openssl-x86-arm ################################################## [ 21s] libpython-x86-arm ################################################## [ 21s] libxml2-x86-arm ################################################## [ 21s] systemd-libs ################################################## [ 21s] xz-lzma-compat ################################################## [ 21s] python-lxml ################################################## [ 21s] cmake ################################################## [ 21s] libmount ################################################## [ 21s] smack-utils ################################################## [ 21s] libdlog ################################################## [ 21s] kmod-libs ################################################## [ 21s] libgthread ################################################## [ 21s] cpp ################################################## [ 21s] libasan ################################################## [ 21s] libubsan ################################################## [ 21s] libatomic ################################################## [ 21s] libgomp ################################################## [ 21s] capi-base-common ################################################## [ 21s] capi-base-common-devel ################################################## [ 21s] vconf-internal-keys-devel ################################################## [ 21s] cpio ################################################## [ 21s] db4 ################################################## [ 21s] fdupes ################################################## [ 21s] gdbm ################################################## [ 21s] perl-Pod-Escapes ################################################## [ 21s] perl-Compress-Raw-Zlib ################################################## [ 21s] perl-IO-Compress-Base ################################################## [ 21s] perl-Module-Pluggable ################################################## [ 21s] perl-Pod-Simple ################################################## [ 21s] perl-IO-Compress-Zlib ################################################## [ 22s] perl-libs ################################################## [ 22s] perl ################################################## [ 22s] perl-URI ################################################## [ 22s] autoconf ################################################## [ 22s] automake ################################################## [ 22s] perl-HTML-Tagset ################################################## [ 22s] perl-TimeDate ################################################## [ 22s] perl-Compress-Zlib ################################################## [ 22s] perl-libs-x86-arm ################################################## [ 23s] perl-x86-arm ################################################## [ 24s] perl-HTML-Parser ################################################## [ 24s] perl-libwww-perl ################################################## [ 24s] perl-XML-Parser ################################################## [ 24s] iniparser ################################################## [ 24s] capi-system-info ################################################## [ 24s] libXau ################################################## [ 24s] libxcb ################################################## [ 24s] libX11 ################################################## [ 24s] dbus-libs ################################################## [ 24s] dbus ################################################## [ 24s] systemd ################################################## [ 24s] vconf ################################################## [ 24s] Failed to get D-Bus connection: Unknown error -1 [ 24s] vconf-keys-devel ################################################## [ 24s] libffi ################################################## [ 24s] libgobject ################################################## [ 24s] gio-branding-upstream ################################################## [ 24s] libgio ################################################## [ 24s] glib2-tools ################################################## [ 24s] glib2-devel ################################################## [ 24s] libitm ################################################## [ 25s] gcc ################################################## [ 25s] gcc-c++ ################################################## [ 26s] cross-armv7l-gcc-accel-x86-a################################################## [ 26s] "GCCVER: 4.9 GCCVER_NEW: 4.9 " [ 26s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 26s] readline ################################################## [ 27s] python ################################################## [ 27s] ruby ################################################## [ 27s] unzip ################################################## [ 27s] rpm-build ################################################## [ 27s] make ################################################## [ 27s] make-x86-arm ################################################## [ 27s] rpm-build-x86-arm ################################################## [ 27s] ruby-x86-arm ################################################## [ 27s] python-x86-arm ################################################## [ 27s] cross-armv7l-binutils-accel-################################################## [ 27s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/addr2line': File exists [ 27s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ar': File exists [ 28s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/as': File exists [ 28s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/c++filt': File exists [ 28s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/elfedit': File exists [ 28s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/gprof': File exists [ 28s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld': File exists [ 28s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld.bfd': File exists [ 28s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld.gold': File exists [ 28s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/nm': File exists [ 28s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/objcopy': File exists [ 28s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/objdump': File exists [ 28s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ranlib': File exists [ 28s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/readelf': File exists [ 28s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/size': File exists [ 28s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/strings': File exists [ 28s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/strip': File exists [ 28s] vconf-devel ################################################## [ 28s] capi-system-info-devel ################################################## [ 28s] perl-XML-Parser-x86-arm ################################################## [ 28s] perl-HTML-Parser-x86-arm ################################################## [ 28s] build ################################################## [ 28s] libtool ################################################## [ 28s] fdupes-x86-arm ################################################## [ 28s] libdlog-devel ################################################## [ 28s] cmake-x86-arm ################################################## [ 28s] python-lxml-x86-arm ################################################## [ 29s] python-base-x86-arm ################################################## [ 30s] elfutils-x86-arm ################################################## [ 30s] gzip-x86-arm ################################################## [ 30s] gawk-x86-arm ################################################## [ 30s] patch-x86-arm ################################################## [ 30s] rpm-x86-arm ################################################## [ 30s] /bin/rpm.orig-arm already present - skipping. [ 30s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 30s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 30s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 30s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 30s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 30s] nss-softokn-freebl-x86-arm ################################################## [ 30s] m4-x86-arm ################################################## [ 30s] diffutils-x86-arm ################################################## [ 30s] tar-x86-arm ################################################## [ 30s] bzip2-x86-arm ################################################## [ 30s] libxslt-x86-arm ################################################## [ 30s] mv: cannot stat `/usr/bin/xsltproc': No such file or directory [ 30s] python-xml-x86-arm ################################################## [ 30s] file-x86-arm ################################################## [ 30s] sqlite-x86-arm ################################################## [ 30s] sed-x86-arm ################################################## [ 30s] expat-x86-arm ################################################## [ 30s] ncurses-libs-x86-arm ################################################## [ 30s] pkg-config-x86-arm ################################################## [ 30s] util-linux ################################################## [ 30s] psmisc ################################################## [ 30s] pcre ################################################## [ 30s] patchelf ################################################## [ 30s] e2fsprogs-libs ################################################## [ 30s] net-tools ################################################## [ 31s] removing nis flags from //etc/nsswitch.conf... [ 31s] now finalizing build dir... [ 32s] build target is armv7l-tizen-linux [ 32s] ----------------------------------------------------------------- [ 32s] I have the following modifications for capi-system-device.spec: [ 32s] 5c5 [ 32s] < Release: 18 [ 32s] --- [ 32s] > Release: %{?release_prefix:%{release_prefix}.}2.1 [ 32s] ----------------------------------------------------------------- [ 32s] ----- building capi-system-device.spec (user abuild) [ 32s] ----------------------------------------------------------------- [ 32s] ----------------------------------------------------------------- [ 32s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:2.4:Mobile/target-TM1/5b64c29563db171c81bc51aab4cef86f-capi-system-device' /home/abuild/rpmbuild/SOURCES/capi-system-device.spec [ 32s] Building target platforms: armv7l-tizen-linux [ 32s] Building for target armv7l-tizen-linux [ 32s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.I6PMoJ [ 32s] + umask 022 [ 32s] + cd /home/abuild/rpmbuild/BUILD [ 32s] + cd /home/abuild/rpmbuild/BUILD [ 32s] + rm -rf capi-system-device-0.1.0 [ 32s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/capi-system-device-0.1.0.tar.gz [ 32s] + /bin/tar -xf - [ 32s] + STATUS=0 [ 32s] + '[' 0 -ne 0 ']' [ 32s] + cd capi-system-device-0.1.0 [ 32s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 32s] + exit 0 [ 32s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.CZWHcV [ 32s] + umask 022 [ 32s] + cd /home/abuild/rpmbuild/BUILD [ 32s] + cd capi-system-device-0.1.0 [ 32s] + LANG=C [ 32s] + export LANG [ 32s] + unset DISPLAY [ 32s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 32s] + export CFLAGS [ 32s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 32s] + export CXXFLAGS [ 32s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 32s] + export FFLAGS [ 32s] + LD_AS_NEEDED=1 [ 32s] + export LD_AS_NEEDED [ 32s] + export 'CFLAGS+= -DTIZEN_ENGINEER_MODE' [ 32s] + CFLAGS+=' -DTIZEN_ENGINEER_MODE' [ 32s] + cp /home/abuild/rpmbuild/SOURCES/capi-system-device.manifest . [ 32s] ++ echo 0.1.0 [ 32s] ++ awk 'BEGIN {FS="."}{print $1}' [ 32s] + MAJORVER=0 [ 32s] + cmake . -DCMAKE_INSTALL_PREFIX=/usr -DFULLVER=0.1.0 -DMAJORVER=0 [ 32s] -- The C compiler identification is GNU [ 32s] -- The CXX compiler identification is GNU [ 32s] -- Check for working C compiler: /usr/bin/gcc [ 32s] -- Check for working C compiler: /usr/bin/gcc -- works [ 32s] -- Detecting C compiler ABI info [ 32s] -- Detecting C compiler ABI info - done [ 32s] -- Check for working CXX compiler: /usr/bin/c++ [ 32s] -- Check for working CXX compiler: /usr/bin/c++ -- works [ 32s] -- Detecting CXX compiler ABI info [ 32s] -- Detecting CXX compiler ABI info - done [ 32s] -- checking for modules 'dlog;vconf;capi-base-common;capi-system-info;gio-2.0' [ 32s] -- found dlog, version 1.0 [ 32s] -- found vconf, version 0.2.45 [ 32s] -- found capi-base-common, version 0.2.2 [ 32s] -- found capi-system-info, version [ 32s] -- found gio-2.0, version 2.44.1 [ 32s] -- Configuring done [ 32s] -- Generating done [ 32s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/capi-system-device-0.1.0 [ 32s] + make -j4 [ 32s] Scanning dependencies of target capi-system-device [ 32s] [ 10%] [ 20%] [ 30%] [ 40%] Building C object CMakeFiles/capi-system-device.dir/src/haptic.c.o [ 32s] Building C object CMakeFiles/capi-system-device.dir/src/display.c.o [ 32s] Building C object CMakeFiles/capi-system-device.dir/src/power.c.o [ 32s] Building C object CMakeFiles/capi-system-device.dir/src/device.c.o [ 33s] [ 50%] Building C object CMakeFiles/capi-system-device.dir/src/dbus.c.o [ 33s] [ 60%] [ 70%] Building C object CMakeFiles/capi-system-device.dir/src/memory.c.o [ 33s] Building C object CMakeFiles/capi-system-device.dir/src/battery.c.o [ 33s] [ 80%] Building C object CMakeFiles/capi-system-device.dir/src/cpu.c.o [ 33s] [ 90%] Building C object CMakeFiles/capi-system-device.dir/src/led.c.o [ 33s] [100%] Building C object CMakeFiles/capi-system-device.dir/src/callback.c.o [ 33s] Linking C shared library libcapi-system-device.so [ 33s] [100%] Built target capi-system-device [ 33s] + exit 0 [ 33s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.raLHz9 [ 33s] + umask 022 [ 33s] + cd /home/abuild/rpmbuild/BUILD [ 33s] + cd capi-system-device-0.1.0 [ 33s] + LANG=C [ 33s] + export LANG [ 33s] + unset DISPLAY [ 33s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-2.1.arm [ 33s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-2.1.arm [ 33s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-2.1.arm [ 33s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-2.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-2.1.arm install [ 33s] [100%] Built target capi-system-device [ 33s] Install the project... [ 33s] -- Install configuration: "" [ 33s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-2.1.arm/usr/lib/libcapi-system-device.so.0.1.0 [ 33s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-2.1.arm/usr/lib/libcapi-system-device.so.0 [ 33s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-2.1.arm/usr/lib/libcapi-system-device.so [ 33s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-2.1.arm/usr/include/system/device.h [ 33s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-2.1.arm/usr/include/system/device-error.h [ 33s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-2.1.arm/usr/include/device [ 33s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-2.1.arm/usr/include/device/callback.h [ 33s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-2.1.arm/usr/include/device/device-error.h [ 33s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-2.1.arm/usr/include/device/led.h [ 33s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-2.1.arm/usr/include/device/power.h [ 33s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-2.1.arm/usr/include/device/display.h [ 33s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-2.1.arm/usr/include/device/haptic.h [ 33s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-2.1.arm/usr/include/device/battery.h [ 33s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-2.1.arm/usr/lib/pkgconfig/capi-system-device.pc [ 33s] + rm -f /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-2.1.arm/usr/share/info/dir [ 33s] + find /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-2.1.arm -regex '.*\.la$' [ 33s] + xargs rm -f -- [ 33s] + find /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-2.1.arm -regex '.*\.a$' [ 33s] + xargs rm -f -- [ 33s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-2.1.arm/usr/share/license [ 33s] + cp LICENSE /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-2.1.arm/usr/share/license/capi-system-device [ 33s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/capi-system-device-0.1.0 [ 33s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-2.1.arm/usr/lib/libcapi-system-device.so.0.1.0 [ 33s] symlinked /usr/lib/debug/usr/lib/libcapi-system-device.so.0.1.0.debug to /usr/lib/debug/usr/lib/libcapi-system-device.so.0.debug [ 33s] symlinked /usr/lib/debug/usr/lib/libcapi-system-device.so.0.1.0.debug to /usr/lib/debug/usr/lib/libcapi-system-device.so.debug [ 33s] 207 blocks [ 33s] + /usr/lib/rpm/check-buildroot [ 33s] + /usr/lib/rpm//brp-compress [ 33s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 33s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 33s] + /usr/lib/rpm/brp-python-hardlink [ 33s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-2.1.arm [ 34s] Processing files: capi-system-device-0.1.0-2.1.armv7l [ 34s] Aptk: PG1hbmlmZXN0Pgo8cmVxdWVzdD4KCTxkb21haW4gIG5hbWU9Il8iLz4KPC9yZXF1 [ 34s] ZXN0Pgo8L21hbmlmZXN0Pgo= [ 34s] [ 34s] Provides: libcapi-system-device.so.0 [ 34s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 34s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 34s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 34s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 34s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libcapi-system-info.so.0 libdlog.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libgio-2.0.so.0 libglib-2.0.so.0 libgobject-2.0.so.0 libpthread.so.0 libvconf.so.0 rtld(GNU_HASH) [ 34s] Processing files: capi-system-device-debuginfo-0.1.0-2.1.armv7l [ 34s] Processing files: capi-system-device-debugsource-0.1.0-2.1.armv7l [ 34s] Processing files: capi-system-device-devel-0.1.0-2.1.armv7l [ 34s] Aptk: PG1hbmlmZXN0Pgo8cmVxdWVzdD4KCTxkb21haW4gIG5hbWU9Il8iLz4KPC9yZXF1 [ 34s] ZXN0Pgo8L21hbmlmZXN0Pgo= [ 34s] [ 34s] Provides: pkgconfig(capi-system-device) [ 34s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 34s] Requires: /usr/bin/pkg-config libcapi-system-device.so.0 pkgconfig(capi-base-common) [ 34s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-2.1.arm [ 34s] Wrote: /home/abuild/rpmbuild/SRPMS/capi-system-device-0.1.0-2.1.src.rpm [ 34s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-device-0.1.0-2.1.armv7l.rpm [ 34s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-device-debuginfo-0.1.0-2.1.armv7l.rpm [ 34s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-device-debugsource-0.1.0-2.1.armv7l.rpm [ 34s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-device-devel-0.1.0-2.1.armv7l.rpm [ 34s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.TH4JbH [ 34s] + umask 022 [ 34s] + cd /home/abuild/rpmbuild/BUILD [ 34s] + cd capi-system-device-0.1.0 [ 34s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-2.1.arm [ 34s] + exit 0 [ 34s] ... checking for files with abuild user/group [ 34s] ... creating baselibs [ 34s] ... comparing built packages with the former built [ 34s] /usr/lib/build/rpm-check.sh [ 34s] compare /.build.oldpackages/capi-system-device-0.1.0-1.2.src.rpm /home/abuild/rpmbuild/SRPMS/capi-system-device-0.1.0-2.1.src.rpm [ 34s] --- /tmp/tmp.xsCWkWi0Mt 2016-05-30 22:08:03.428367334 +0000 [ 34s] +++ /tmp/tmp.EEfM9JoidW 2016-05-30 22:08:03.436367334 +0000 [ 34s] @@ -1,7 +1,7 @@ [ 34s] capi-system-device 0.1.0 (none) [ 34s] A Device library in TIZEN C API [ 34s] A Device library in TIZEN C API package. [ 34s] - tizen Tizen:2.4:Mobile / target-TM1 obs://build.tizen.org/Tizen:2.4:Mobile/target-TM1/8b85e9f113b894c9f9ab1ed94cbed456-capi-system-device Apache-2.0 Apache-2.0 [ 34s] + tizen Tizen:2.4:Mobile / target-TM1 obs://build.tizen.org/Tizen:2.4:Mobile/target-TM1/5b64c29563db171c81bc51aab4cef86f-capi-system-device Apache-2.0 Apache-2.0 [ 34s] System/Libraries (none) (none) (none) (none) [ 34s] (none) 4.9.1 (none) [ 34s] cpio gzip 9 [ 34s] ... saving built statistics [ 34s] ... saving built packages [ 34s] /home/abuild/rpmbuild/RPMS/armv7l/capi-system-device-0.1.0-2.1.armv7l.rpm [ 34s] /home/abuild/rpmbuild/RPMS/armv7l/capi-system-device-debuginfo-0.1.0-2.1.armv7l.rpm [ 34s] /home/abuild/rpmbuild/RPMS/armv7l/capi-system-device-debugsource-0.1.0-2.1.armv7l.rpm [ 34s] /home/abuild/rpmbuild/RPMS/armv7l/capi-system-device-devel-0.1.0-2.1.armv7l.rpm [ 34s] /home/abuild/rpmbuild/SRPMS/capi-system-device-0.1.0-2.1.src.rpm [ 34s] /home/abuild/rpmbuild/OTHER/_statistics [ 34s] [ 34s] w12 finished "build capi-system-device.spec" at Mon May 30 22:08:03 UTC 2016. [ 34s] [ 35s] /.build/build: line 368: 236 Killed background_monitor_process [ 37s] [ 33.797713] SysRq : Power Off [ 37s] [ 33.804645] Power down. [ 37s] build: extracting built packages... [ 37s] capi-system-device-0.1.0-2.1.armv7l.rpm [ 37s] capi-system-device-debuginfo-0.1.0-2.1.armv7l.rpm [ 37s] capi-system-device-debugsource-0.1.0-2.1.armv7l.rpm [ 37s] capi-system-device-devel-0.1.0-2.1.armv7l.rpm [ 37s] capi-system-device-0.1.0-2.1.src.rpm [ 37s] _statistics