[ 0s] Using BUILD_ROOT=/srv/build/root_3/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_3/root [ 0s] [ 0s] [ 0s] w03 started "build _service:gbs:capi-system-sensor.spec" at Mon May 30 22:08:45 UTC 2016. [ 0s] [ 0s] Building capi-system-sensor for project 'Tizen:2.4:Mobile' repository 'target-TM1' arch 'armv7l' srcmd5 'ddece15a79c1013034da7815943dd8c1' [ 0s] [ 0s] processing specfile /srv/build/root_3/.build-srcdir/_service:gbs:capi-system-sensor.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_3/.build-srcdir/_service:gbs:capi-system-sensor.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/3/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_3/.build.rpmlist /srv/build/root_3/.build-srcdir/_service:gbs:capi-system-sensor.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 0s] [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: glibc -> glibc-common -> bash [ 0s] breaking dependency glibc-common -> bash [ 0s] cycle: glibc -> glibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: glibc -> glibc-common -> coreutils [ 0s] breaking dependency coreutils -> glibc [ 0s] cycle: glibc -> glibc-common -> coreutils -> libacl [ 0s] breaking dependency libacl -> glibc [ 0s] cycle: glibc -> glibc-common -> coreutils -> libacl -> libattr [ 0s] breaking dependency libattr -> glibc [ 0s] cycle: libgcc -> glibc -> glibc-common -> coreutils -> libacl -> libattr [ 0s] breaking dependency libacl -> libattr [ 0s] cycle: libgcc -> glibc -> glibc-common -> coreutils -> libacl [ 0s] breaking dependency glibc-common -> coreutils [ 0s] cycle: glibc -> glibc-common [ 0s] breaking dependency glibc -> glibc-common [ 0s] cycle: libgcc -> glibc [ 0s] breaking dependency libgcc -> glibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/52] preinstalling tizen-release... [ 0s] [2/52] preinstalling libgcc... [ 0s] [3/52] preinstalling setup... [ 0s] [4/52] preinstalling filesystem... [ 0s] [5/52] preinstalling glibc... [ 0s] [6/52] preinstalling libattr... [ 0s] [7/52] preinstalling libacl... [ 0s] [8/52] preinstalling bash... [ 0s] [9/52] preinstalling bzip2-libs... [ 0s] [10/52] preinstalling diffutils... [ 0s] [11/52] preinstalling elfutils-libelf... [ 0s] [12/52] preinstalling libcap... [ 0s] [13/52] preinstalling liblua... [ 0s] [14/52] preinstalling libstdc++... [ 0s] [15/52] preinstalling ncurses-libs... [ 0s] [16/52] preinstalling nspr... [ 0s] [17/52] preinstalling nss-softokn-freebl... [ 0s] [18/52] preinstalling popt... [ 0s] [19/52] preinstalling readline... [ 0s] [20/52] preinstalling sed... [ 0s] [21/52] preinstalling sqlite... [ 0s] [22/52] preinstalling xz-libs... [ 0s] [23/52] preinstalling zlib... [ 0s] [24/52] preinstalling glibc-common... [ 1s] [25/52] preinstalling tar... [ 1s] [26/52] preinstalling coreutils... [ 1s] [27/52] preinstalling qemu-linux-user-x86-arm... [ 1s] [28/52] preinstalling tizen-accelerator... [ 1s] [29/52] preinstalling libfile... [ 1s] [30/52] preinstalling bzip2... [ 1s] [31/52] preinstalling nss... [ 1s] [32/52] preinstalling bzip2-libs-x86-arm... [ 1s] [33/52] preinstalling elfutils-libelf-x86-arm... [ 1s] [34/52] preinstalling glibc-x86-arm... [ 1s] [35/52] preinstalling libacl-x86-arm... [ 1s] [36/52] preinstalling libattr-x86-arm... [ 1s] [37/52] preinstalling libcap-x86-arm... [ 1s] [38/52] preinstalling libgcc-x86-arm... [ 1s] [39/52] preinstalling liblua-x86-arm... [ 1s] [40/52] preinstalling ncurses-libs-x86-arm... [ 1s] [41/52] preinstalling nspr-x86-arm... [ 1s] [42/52] preinstalling nss-softokn-freebl-x86-arm... [ 1s] [43/52] preinstalling nss-x86-arm... [ 1s] [44/52] preinstalling popt-x86-arm... [ 1s] [45/52] preinstalling sqlite-x86-arm... [ 1s] [46/52] preinstalling xz-libs-x86-arm... [ 1s] [47/52] preinstalling zlib-x86-arm... [ 1s] [48/52] preinstalling rpm-libs... [ 1s] [49/52] preinstalling bash-x86-arm... [ 1s] [50/52] preinstalling rpm-libs-x86-arm... [ 1s] [51/52] preinstalling rpm... [ 1s] [52/52] preinstalling rpm-x86-arm... [ 1s] [ 1s] cycle: perl -> perl-libs [ 1s] breaking dependency perl-libs -> perl [ 1s] [1/8] preinstalling e2fsprogs-libs... [ 1s] [2/8] preinstalling libpcre... [ 1s] [3/8] preinstalling libuuid... [ 1s] [4/8] preinstalling grep... [ 1s] [5/8] preinstalling libblkid... [ 1s] [6/8] preinstalling util-linux... [ 1s] [7/8] preinstalling perl-libs... [ 1s] [8/8] preinstalling perl... [ 2s] copying packages... [ 2s] reordering...cycle: bash -> glibc -> glibc-common [ 2s] breaking dependency glibc-common -> bash [ 2s] cycle: bash -> glibc -> glibc-common -> coreutils [ 2s] breaking dependency glibc-common -> coreutils [ 2s] cycle: glibc -> glibc-common -> findutils [ 2s] breaking dependency glibc-common -> findutils [ 2s] cycle: glibc -> glibc-common [ 2s] breaking dependency glibc-common -> glibc [ 2s] cycle: glibc -> glibc-common -> grep [ 2s] breaking dependency grep -> glibc [ 2s] cycle: glibc -> glibc-common -> grep -> libgcc [ 2s] breaking dependency grep -> libgcc [ 2s] cycle: glibc -> glibc-common -> grep -> libpcre [ 2s] breaking dependency libpcre -> glibc [ 2s] cycle: glibc -> glibc-common -> grep -> libpcre -> libgcc [ 2s] breaking dependency libpcre -> libgcc [ 2s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++ [ 2s] breaking dependency libstdc++ -> glibc [ 2s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 2s] breaking dependency glibc -> glibc-common [ 2s] cycle: glibc -> libgcc [ 2s] breaking dependency libgcc -> glibc [ 2s] cycle: filesystem -> setup [ 2s] breaking dependency setup -> filesystem [ 2s] cycle: gio-branding-upstream -> libgio [ 2s] breaking dependency libgio -> gio-branding-upstream [ 2s] cycle: ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses [ 2s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses-base [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl -> perl-libs [ 2s] cycle: perl -> perl-IO-Compress-Zlib [ 2s] breaking dependency perl -> perl-IO-Compress-Zlib [ 2s] cycle: perl -> perl-IO-Compress-Base [ 2s] breaking dependency perl -> perl-IO-Compress-Base [ 2s] cycle: perl -> perl-Module-Pluggable [ 2s] breaking dependency perl -> perl-Module-Pluggable [ 2s] cycle: perl -> perl-Pod-Simple [ 2s] breaking dependency perl -> perl-Pod-Simple [ 2s] cycle: dbus-libs -> dbus [ 2s] breaking dependency dbus -> dbus-libs [ 2s] cycle: libsensord -> sensord [ 2s] breaking dependency sensord -> libsensord [ 2s] cycle: nss -> nss-sysinit [ 2s] breaking dependency nss -> nss-sysinit [ 2s] cycle: rpm-libs -> rpm [ 2s] breaking dependency rpm-libs -> rpm [ 2s] done [ 3s] booting kvm ... [ 3s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 16000 -drive file=/srv/build/root_3/root,if=virtio,cache=none -drive file=/srv/build/root_3/root,if=ide,index=0,cache=none -drive file=/srv/build/root_3/swap,if=virtio,cache=none -smp 8 [ 6s] doing fast boot [ 6s] Creating device nodes with udev [ 6s] Waiting for device /dev/vda to appear: ok [ 6s] fsck from util-linux 2.21.2 [ 6s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 6s] /dev/vda: clean, 4736/4194304 files, 339156/16777216 blocks [ 6s] fsck succeeded. Mounting root device read-write. [ 6s] Mounting root /dev/vda [ 6s] mount -o rw -t ext4 /dev/vda /root [ 6s] replacing /etc/mtab with symlink to /proc/self/mounts [ 6s] /.build/qemu-reg: line 9: interpreter '/usr/bin/qemu-armeb-binfmt' not found, ignoring [ 6s] /.build/qemu-reg: line 10: interpreter '/usr/bin/qemu-ppc-binfmt' not found, ignoring [ 6s] /.build/qemu-reg: line 11: interpreter '/usr/bin/qemu-mips-binfmt' not found, ignoring [ 6s] /.build/qemu-reg: line 12: interpreter '/usr/bin/qemu-mipsel-binfmt' not found, ignoring [ 6s] /.build/qemu-reg: line 18: interpreter '/usr/bin/qemu-sh4-binfmt' not found, ignoring [ 6s] /.build/qemu-reg: line 19: interpreter '/usr/bin/qemu-sh4eb-binfmt' not found, ignoring [ 7s] 2nd stage started in virtual machine [ 7s] machine type: armv7l [ 7s] swapon on /dev/vdb [ 7s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 7s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 7s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 7s] logging output to //.build.log... [ 7s] processing specfile /.build-srcdir/_service:gbs:capi-system-sensor.spec ... [ 7s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:capi-system-sensor.spec build rpmlint-Factory ... [ 8s] running rpm-x86-arm postinstall script [ 8s] running rpm-libs-x86-arm postinstall script [ 8s] running tizen-accelerator postinstall script [ 8s] running glibc-x86-arm postinstall script [ 9s] running bash-x86-arm postinstall script [ 9s] initializing rpm db... [ 13s] [1/195] cumulate cross-armv7l-platformfile-0.0.1-1.1 [ 13s] [2/195] cumulate kernel-headers-3.4.91-1.1 [ 13s] [3/195] cumulate libX11-common-1.6.2-1.1 [ 13s] [4/195] cumulate tizen-release-2.2.0-1.1 [ 13s] [5/195] cumulate tzdata-2014j-1.1 [ 13s] [6/195] cumulate libgcc-4.9.2-2015.02.1.11 [ 13s] [7/195] cumulate setup-0.2-1.1 [ 13s] [8/195] cumulate filesystem-0.1-1.1 [ 13s] [9/195] cumulate glibc-2.20-2014.11.1.10 [ 14s] [10/195] cumulate libstdc++-4.9.2-2015.02.1.11 [ 14s] [11/195] cumulate libatomic-4.9.2-2015.02.1.11 [ 14s] [12/195] cumulate libgomp-4.9.2-2015.02.1.11 [ 14s] [13/195] cumulate openssl-1.0.1p-1.5 [ 14s] [14/195] cumulate smack-1.0+s14-1.8 [ 14s] [15/195] cumulate bash-4.1-1.6 [ 14s] [16/195] cumulate bzip2-libs-1.0.5-1.8 [ 14s] [17/195] cumulate capi-base-common-0.2.2-1.1 [ 14s] [18/195] cumulate cpio-2.8-1.6 [ 14s] [19/195] cumulate db4-4.8.30-1.8 [ 14s] [20/195] cumulate diffutils-3.0-1.6 [ 14s] [21/195] cumulate e2fsprogs-libs-1.41.9-1.4 [ 14s] [22/195] cumulate elfutils-libelf-0.152-1.12 [ 14s] [23/195] cumulate expat-2.0.1-1.8 [ 14s] [24/195] cumulate fdupes-1.40-1.5 [ 14s] [25/195] cumulate findutils-4.2.31-1.5 [ 14s] [26/195] cumulate gdbm-1.8.3-1.12 [ 14s] [27/195] cumulate libXau-1.0.8-1.1 [ 14s] [28/195] cumulate libattr-2.4.44-1.8 [ 14s] [29/195] cumulate libffi-3.1-1.1 [ 14s] [30/195] cumulate libglib-2.44.1-2.1 [ 14s] [31/195] cumulate libitm-4.9.2-2015.02.1.11 [ 14s] [32/195] cumulate liblua-5.1.4-1.6 [ 14s] [33/195] cumulate libuuid-2.20.2-1.4 [ 14s] [34/195] cumulate m4-1.4.14-1.5 [ 14s] [35/195] cumulate net-tools-1.60-2.6 [ 14s] [36/195] cumulate nspr-4.9-1.9 [ 14s] [37/195] cumulate nss-softokn-freebl-3.12.9-1.17 [ 14s] [38/195] cumulate patch-2.6-1.6 [ 15s] [39/195] cumulate pkg-config-0.25-2.6 [ 15s] [40/195] cumulate popt-1.16-1.8 [ 15s] [41/195] cumulate readline-5.2-1.6 [ 15s] [42/195] cumulate ruby-1.9.2-1.6 [ 15s] [43/195] cumulate sed-4.1.5-1.5 [ 15s] [44/195] cumulate sqlite-3.8.10.2-1.8 [ 15s] [45/195] cumulate xz-libs-5.0.3-1.8 [ 15s] [46/195] cumulate zlib-1.2.8-1.8 [ 15s] [47/195] cumulate libasan-4.9.2-2015.02.1.11 [ 15s] [48/195] cumulate libpcre-7.7-1.25 [ 15s] [49/195] cumulate libubsan-4.9.2-2015.02.1.11 [ 15s] [50/195] cumulate patchelf-0.5.svn20809-1.5 [ 15s] [51/195] cumulate ncurses-libs-5.7-1.8 [ 15s] [52/195] cumulate build-compare-2009.10.14-1.6 [ 15s] [53/195] cumulate qemu-linux-user-x86-arm-2.2.0-4.1.1 [ 15s] [54/195] cumulate capi-base-common-devel-0.2.2-1.1 [ 15s] [55/195] cumulate cpp-4.9.2-2015.02.1.11 [ 15s] [56/195] cumulate glibc-headers-2.20-2014.11.1.10 [ 15s] [57/195] cumulate libcap-2.21-1.6 [ 15s] [58/195] cumulate unzip-6.0-1.12 [ 15s] [59/195] cumulate grep-2.5.1a-1.5 [ 15s] [60/195] cumulate libacl-2.2.49-1.5 [ 15s] [61/195] cumulate libfile-5.04-1.7 [ 15s] [62/195] cumulate libgmodule-2.44.1-2.1 [ 15s] [63/195] cumulate libpython-2.7.1-1.5 [ 15s] [64/195] cumulate libxcb-1.10.0-1.1 [ 15s] [65/195] cumulate libxml2-2.9.2-1.3 [ 15s] [66/195] cumulate make-3.82-154.1.6 [ 15s] [67/195] cumulate ncurses-5.7-1.8 [ 16s] [68/195] cumulate pcre-7.7-1.25 [ 16s] [69/195] cumulate psmisc-22.20-1.6 [ 16s] [70/195] cumulate smack-utils-1.0+s14-1.8 [ 16s] [71/195] cumulate binutils-2.25.0-2015.01.1.8 [ 16s] [72/195] cumulate bzip2-1.0.5-1.8 [ 16s] [73/195] cumulate kmod-libs-15-1.1 [ 16s] [74/195] cumulate libblkid-2.20.2-1.4 [ 16s] [75/195] cumulate libgobject-2.44.1-2.1 [ 16s] [76/195] cumulate xz-5.0.3-1.8 [ 16s] [77/195] cumulate elfutils-libs-0.152-1.12 [ 16s] [78/195] cumulate nss-3.12.9-1.17 [ 16s] [79/195] cumulate perl-5.12.1-1.25 [ 16s] [80/195] cumulate ncurses-base-5.7-1.8 [ 16s] [81/195] cumulate perl-HTML-Tagset-3.20-1.1 [ 16s] [82/195] cumulate perl-IO-Compress-Base-2.008-1.25 [ 16s] [83/195] cumulate perl-Module-Pluggable-3.60-1.25 [ 16s] [84/195] cumulate perl-Pod-Escapes-1.04-1.25 [ 16s] [85/195] cumulate perl-TimeDate-1.20-1.1 [ 16s] [86/195] cumulate perl-URI-1.54-1.1 [ 16s] [87/195] cumulate glibc-devel-2.20-2014.11.1.10 [ 16s] [88/195] cumulate file-5.04-1.7 [ 16s] [89/195] cumulate libxslt-1.1.28-1.2 [ 16s] [90/195] cumulate perl-Compress-Raw-Zlib-2.008-1.25 [ 16s] [91/195] cumulate perl-libs-5.12.1-1.25 [ 16s] [92/195] cumulate tar-1.17-1.6 [ 16s] [93/195] cumulate coreutils-6.9-1.6 [ 17s] [94/195] cumulate libX11-1.6.2-1.1 [ 17s] [95/195] cumulate libdlog-0.4.1-1.1 [ 17s] [96/195] cumulate libmount-2.20.2-1.4 [ 17s] [97/195] cumulate xz-lzma-compat-5.0.3-1.8 [ 17s] [98/195] cumulate elfutils-0.152-1.12 [ 17s] [99/195] cumulate nss-sysinit-3.12.9-1.17 [ 17s] [100/195] cumulate python-base-2.7.1-1.5 [ 17s] [101/195] cumulate glibc-common-2.20-2014.11.1.10 [ 17s] [102/195] cumulate libgio-2.44.1-2.1 [ 17s] [103/195] cumulate libarchive-2.8.3-1.2 [ 17s] [104/195] cumulate rpm-libs-4.9.1-4.3.1.10 [ 17s] [105/195] cumulate gio-branding-upstream-2.44.1-2.1 [ 17s] [106/195] cumulate libstdc++-devel-4.9.2-2015.02.1.11 [ 17s] [107/195] cumulate perl-Pod-Simple-3.07-1.25 [ 17s] [108/195] cumulate tizen-accelerator-1.0.1-1.1 [ 17s] [109/195] cumulate libdlog-devel-0.4.1-1.1 [ 17s] [110/195] cumulate perl-IO-Compress-Zlib-2.008-1.25 [ 17s] [111/195] cumulate gawk-3.1.5-1.6 [ 17s] [112/195] cumulate gzip-1.3.12-1.6 [ 17s] [113/195] cumulate pam-1.1.5-1.5 [ 18s] [114/195] cumulate perl-HTML-Parser-3.65-1.5 [ 18s] [115/195] cumulate python-xml-2.7.1-1.5 [ 18s] [116/195] cumulate autoconf-2.68-1.1 [ 18s] [117/195] cumulate build-2011.01.10a-1.1 [ 18s] [118/195] installing rpm-4.9.1-4.3.1.10 [ 18s] [119/195] cumulate python-lxml-2.2.3-1.2 [ 18s] [120/195] cumulate dbus-1.8.16-2.1 [ 18s] [121/195] cumulate util-linux-2.20.2-1.4 [ 18s] [122/195] cumulate cmake-2.8.5-1.1.2 [ 18s] [123/195] cumulate python-2.7.1-1.3 [ 18s] [124/195] cumulate gcc-4.9.2-2015.02.1.11 [ 19s] [125/195] cumulate automake-1.11.1-1.1 [ 19s] [126/195] cumulate bzip2-libs-x86-arm-1.0.5-9.1.4 [ 19s] [127/195] cumulate dbus-libs-1.8.16-2.1 [ 19s] [128/195] cumulate elfutils-libelf-x86-arm-0.152-9.1.4 [ 19s] [129/195] cumulate elfutils-libs-x86-arm-0.152-9.1.4 [ 19s] [130/195] cumulate expat-x86-arm-2.0.1-1.4 [ 19s] [131/195] cumulate glibc-x86-arm-2.20-9.1.5 [ 19s] [132/195] cumulate libacl-x86-arm-2.2.49-9.1.4 [ 19s] [133/195] cumulate libarchive-x86-arm-2.8.3-1.3 [ 19s] [134/195] cumulate libattr-x86-arm-2.4.44-9.1.4 [ 19s] [135/195] cumulate libcap-x86-arm-2.21-9.1.4 [ 19s] [136/195] cumulate libfile-x86-arm-5.04-9.1.4 [ 19s] [137/195] cumulate libgcc-x86-arm-4.9.2-9.1.4 [ 19s] [138/195] cumulate liblua-x86-arm-5.1.4-9.1.3 [ 19s] [139/195] cumulate libpython-x86-arm-2.7.1-9.1.3 [ 19s] [140/195] cumulate libstdc++-x86-arm-4.9.2-9.1.4 [ 19s] [141/195] cumulate libxml2-x86-arm-2.9.2-9.1.3 [ 19s] [142/195] cumulate libxslt-x86-arm-1.1.28-9.1.3 [ 19s] [143/195] cumulate ncurses-libs-x86-arm-5.7-9.1.3 [ 19s] [144/195] cumulate nspr-x86-arm-4.9-9.1.5 [ 19s] [145/195] cumulate nss-softokn-freebl-x86-arm-3.12.9-9.1.5 [ 19s] [146/195] cumulate nss-x86-arm-3.12.9-9.1.5 [ 19s] [147/195] cumulate openssl-x86-arm-1.0.1p-9.1.3 [ 19s] [148/195] cumulate perl-libs-x86-arm-5.12.1-9.1.5 [ 19s] [149/195] cumulate popt-x86-arm-1.16-9.1.4 [ 20s] [150/195] cumulate python-lxml-x86-arm-2.2.3-9.1.3 [ 20s] [151/195] cumulate python-x86-arm-2.7.1-9.1.3 [ 20s] [152/195] cumulate python-xml-x86-arm-2.7.1-9.1.3 [ 20s] [153/195] cumulate rpm-libs-x86-arm-4.9.1-9.1.4 [ 20s] [154/195] cumulate sqlite-x86-arm-3.8.10.2-9.1.3 [ 20s] [155/195] cumulate xz-libs-x86-arm-5.0.3-9.1.4 [ 20s] [156/195] cumulate zlib-x86-arm-1.2.8-9.1.4 [ 20s] [157/195] cumulate gcc-c++-4.9.2-2015.02.1.11 [ 20s] [158/195] cumulate perl-Compress-Zlib-2.008-1.25 [ 20s] [159/195] cumulate systemd-libs-216-1.3 [ 20s] [160/195] cumulate rpm-build-4.9.1-4.3.1.10 [ 20s] [161/195] cumulate bash-x86-arm-4.1-9.1.4 [ 20s] [162/195] cumulate diffutils-x86-arm-3.0-9.1.4 [ 20s] [163/195] cumulate fdupes-x86-arm-1.40-9.1.4 [ 20s] [164/195] cumulate findutils-x86-arm-4.2.31-9.1.4 [ 20s] [165/195] cumulate gawk-x86-arm-3.1.5-9.1.3 [ 20s] [166/195] cumulate gzip-x86-arm-1.3.12-9.1.4 [ 20s] [167/195] cumulate libtool-2.2.6b-1.8 [ 20s] [168/195] cumulate m4-x86-arm-1.4.14-9.1.4 [ 20s] [169/195] cumulate make-x86-arm-3.82-9.1.3 [ 20s] [170/195] cumulate patch-x86-arm-2.6-9.1.4 [ 21s] [171/195] cumulate perl-libwww-perl-5.836-1.1 [ 21s] [172/195] cumulate pkg-config-x86-arm-0.25-9.1.4 [ 21s] [173/195] cumulate ruby-x86-arm-1.9.2-9.1.4 [ 21s] [174/195] cumulate sed-x86-arm-4.1.5-9.1.4 [ 21s] [175/195] cumulate bzip2-x86-arm-1.0.5-1.4 [ 21s] [176/195] cumulate perl-x86-arm-5.12.1-9.1.5 [ 21s] [177/195] cumulate python-base-x86-arm-2.7.1-9.1.3 [ 21s] [178/195] cumulate coreutils-x86-arm-6.9-9.1.4 [ 21s] [179/195] cumulate cross-armv7l-gcc-accel-x86-armv7l-4.9.2-2015.02.1.6 [ 21s] [180/195] cumulate file-x86-arm-5.04-9.1.4 [ 21s] [181/195] cumulate tar-x86-arm-1.17-9.1.4 [ 21s] [182/195] cumulate sensord-1.2.0-2.1 [ 21s] [183/195] cumulate elfutils-x86-arm-0.152-9.1.4 [ 22s] [184/195] cumulate systemd-216-1.3 [ 22s] [185/195] cumulate cmake-x86-arm-2.8.5-1.3 [ 22s] [186/195] cumulate rpm-x86-arm-4.9.1-9.1.4 [ 22s] [187/195] cumulate rpm-build-x86-arm-4.9.1-9.1.4 [ 22s] [188/195] cumulate perl-HTML-Parser-x86-arm-3.65-9.1.3 [ 22s] [189/195] cumulate cross-armv7l-binutils-accel-x86-armv7l-2.25.0-2015.01.1.3 [ 22s] [190/195] cumulate perl-XML-Parser-2.36-1.6 [ 22s] [191/195] cumulate vconf-0.2.84-2.1 [ 22s] [192/195] cumulate perl-XML-Parser-x86-arm-2.36-9.1.3 [ 22s] [193/195] cumulate libsensord-1.2.0-2.1 [ 22s] [194/195] cumulate libsensord-devel-1.2.0-2.1 [ 22s] [195/195] now installing cumulated packages [ 23s] Preparing... ################################################## [ 23s] setup ################################################## [ 23s] filesystem ################################################## [ 23s] tzdata ################################################## [ 23s] libX11-common ################################################## [ 23s] tizen-release ################################################## [ 24s] kernel-headers ################################################## [ 24s] cross-armv7l-platformfile ################################################## [ 24s] bash ################################################## [ 24s] findutils ################################################## [ 24s] grep ################################################## [ 24s] coreutils ################################################## [ 24s] glibc-common ################################################## [ 24s] libgcc ################################################## [ 24s] /sbin/ldconfig: relative path `1' used to build cache [ 24s] warning: %post(libgcc-4.9.2-2015.02.1.11.armv7l) scriptlet failed, exit status 1 [ 24s] glibc ################################################## [ 25s] libstdc++ ################################################## [ 25s] libattr ################################################## [ 25s] libacl ################################################## [ 25s] libpcre ################################################## [ 25s] tizen-accelerator ################################################## [ 25s] glibc-x86-arm ################################################## [ 25s] libattr-x86-arm ################################################## [ 25s] libacl-x86-arm ################################################## [ 26s] libgcc-x86-arm ################################################## [ 26s] libstdc++-x86-arm ################################################## [ 26s] glibc-headers ################################################## [ 26s] glibc-devel ################################################## [ 26s] libstdc++-devel ################################################## [ 26s] coreutils-x86-arm ################################################## [ 29s] bash-x86-arm ################################################## [ 29s] findutils-x86-arm ################################################## [ 29s] build-compare ################################################## [ 29s] qemu-linux-user-x86-arm ################################################## [ 29s] zlib ################################################## [ 29s] xz-libs ################################################## [ 29s] zlib-x86-arm ################################################## [ 29s] bzip2-libs ################################################## [ 30s] libglib ################################################## [ 30s] bzip2-libs-x86-arm ################################################## [ 30s] libxml2 ################################################## [ 30s] elfutils-libelf ################################################## [ 30s] pkg-config ################################################## [ 30s] ncurses-libs ################################################## [ 30s] ncurses ################################################## [ 30s] ncurses-base ################################################## [ 30s] libpython ################################################## [ 30s] python-base ################################################## [ 30s] binutils ################################################## [ 30s] libcap ################################################## [ 30s] expat ################################################## [ 30s] elfutils-libelf-x86-arm ################################################## [ 30s] xz-libs-x86-arm ################################################## [ 30s] libfile ################################################## [ 30s] openssl ################################################## [ 30s] smack ################################################## [ 30s] libuuid ################################################## [ 30s] libblkid ################################################## [ 30s] nspr ################################################## [ 30s] popt ################################################## [ 30s] sed ################################################## [ 30s] sqlite ################################################## [ 30s] popt-x86-arm ################################################## [ 30s] nspr-x86-arm ################################################## [ 30s] libfile-x86-arm ################################################## [ 30s] libcap-x86-arm ################################################## [ 30s] libarchive ################################################## [ 30s] file ################################################## [ 30s] elfutils-libs ################################################## [ 30s] elfutils ################################################## [ 30s] libxslt ################################################## [ 30s] bzip2 ################################################## [ 30s] xz ################################################## [ 30s] tar ################################################## [ 30s] diffutils ################################################## [ 30s] liblua ################################################## [ 30s] liblua-x86-arm ################################################## [ 30s] m4 ################################################## [ 30s] nss-softokn-freebl ################################################## [ 31s] nss ################################################## [ 31s] nss-sysinit ################################################## [ 31s] nss-x86-arm ################################################## [ 31s] rpm-libs ################################################## [ 31s] rpm-libs-x86-arm ################################################## [ 31s] patch ################################################## [ 31s] gawk ################################################## [ 31s] gzip ################################################## [ 31s] pam ################################################## [ 31s] elfutils-libs-x86-arm ################################################## [ 31s] libarchive-x86-arm ################################################## [ 31s] openssl-x86-arm ################################################## [ 31s] libpython-x86-arm ################################################## [ 31s] libxml2-x86-arm ################################################## [ 31s] systemd-libs ################################################## [ 31s] xz-lzma-compat ################################################## [ 31s] python-lxml ################################################## [ 31s] cmake ################################################## [ 31s] libmount ################################################## [ 31s] smack-utils ################################################## [ 31s] libdlog ################################################## [ 31s] python-xml ################################################## [ 31s] libgmodule ################################################## [ 31s] kmod-libs ################################################## [ 32s] cpp ################################################## [ 32s] libasan ################################################## [ 32s] libubsan ################################################## [ 32s] libatomic ################################################## [ 32s] libgomp ################################################## [ 32s] capi-base-common ################################################## [ 32s] capi-base-common-devel ################################################## [ 32s] cpio ################################################## [ 32s] db4 ################################################## [ 32s] fdupes ################################################## [ 32s] gdbm ################################################## [ 32s] perl-Pod-Escapes ################################################## [ 32s] perl-Compress-Raw-Zlib ################################################## [ 32s] perl-IO-Compress-Base ################################################## [ 32s] perl-Module-Pluggable ################################################## [ 32s] perl-Pod-Simple ################################################## [ 32s] perl-IO-Compress-Zlib ################################################## [ 32s] perl-libs ################################################## [ 33s] perl ################################################## [ 33s] perl-URI ################################################## [ 33s] autoconf ################################################## [ 33s] automake ################################################## [ 33s] perl-HTML-Tagset ################################################## [ 33s] perl-TimeDate ################################################## [ 33s] perl-Compress-Zlib ################################################## [ 33s] perl-libs-x86-arm ################################################## [ 33s] perl-x86-arm ################################################## [ 34s] perl-HTML-Parser ################################################## [ 34s] perl-libwww-perl ################################################## [ 34s] perl-XML-Parser ################################################## [ 34s] libXau ################################################## [ 34s] libxcb ################################################## [ 34s] libX11 ################################################## [ 34s] dbus-libs ################################################## [ 34s] dbus ################################################## [ 35s] systemd ################################################## [ 35s] vconf ################################################## [ 35s] Failed to get D-Bus connection: Unknown error -1 [ 35s] libffi ################################################## [ 35s] libgobject ################################################## [ 35s] gio-branding-upstream ################################################## [ 35s] libgio ################################################## [ 35s] sensord ################################################## [ 35s] libsensord ################################################## [ 35s] libitm ################################################## [ 35s] gcc ################################################## [ 36s] gcc-c++ ################################################## [ 37s] cross-armv7l-gcc-accel-x86-a################################################## [ 37s] "GCCVER: 4.9 GCCVER_NEW: 4.9 " [ 37s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 37s] readline ################################################## [ 37s] python ################################################## [ 37s] ruby ################################################## [ 37s] unzip ################################################## [ 37s] rpm-build ################################################## [ 37s] make ################################################## [ 37s] make-x86-arm ################################################## [ 38s] rpm-build-x86-arm ################################################## [ 38s] ruby-x86-arm ################################################## [ 38s] python-x86-arm ################################################## [ 38s] cross-armv7l-binutils-accel-################################################## [ 38s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/addr2line': File exists [ 38s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ar': File exists [ 38s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/as': File exists [ 38s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/c++filt': File exists [ 38s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/elfedit': File exists [ 38s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/gprof': File exists [ 38s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld': File exists [ 38s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld.bfd': File exists [ 38s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld.gold': File exists [ 38s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/nm': File exists [ 38s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/objcopy': File exists [ 38s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/objdump': File exists [ 38s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ranlib': File exists [ 38s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/readelf': File exists [ 38s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/size': File exists [ 39s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/strings': File exists [ 39s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/strip': File exists [ 39s] libsensord-devel ################################################## [ 39s] perl-XML-Parser-x86-arm ################################################## [ 39s] perl-HTML-Parser-x86-arm ################################################## [ 39s] build ################################################## [ 39s] libtool ################################################## [ 39s] fdupes-x86-arm ################################################## [ 39s] libdlog-devel ################################################## [ 39s] python-xml-x86-arm ################################################## [ 39s] cmake-x86-arm ################################################## [ 39s] python-lxml-x86-arm ################################################## [ 39s] python-base-x86-arm ################################################## [ 40s] elfutils-x86-arm ################################################## [ 41s] gzip-x86-arm ################################################## [ 41s] gawk-x86-arm ################################################## [ 41s] patch-x86-arm ################################################## [ 42s] rpm-x86-arm ################################################## [ 42s] /bin/rpm.orig-arm already present - skipping. [ 42s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 42s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 42s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 42s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 42s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 42s] nss-softokn-freebl-x86-arm ################################################## [ 42s] m4-x86-arm ################################################## [ 42s] diffutils-x86-arm ################################################## [ 42s] tar-x86-arm ################################################## [ 42s] bzip2-x86-arm ################################################## [ 42s] libxslt-x86-arm ################################################## [ 42s] mv: cannot stat `/usr/bin/xsltproc': No such file or directory [ 42s] file-x86-arm ################################################## [ 42s] sqlite-x86-arm ################################################## [ 42s] sed-x86-arm ################################################## [ 42s] expat-x86-arm ################################################## [ 42s] ncurses-libs-x86-arm ################################################## [ 42s] pkg-config-x86-arm ################################################## [ 42s] util-linux ################################################## [ 42s] psmisc ################################################## [ 42s] pcre ################################################## [ 43s] patchelf ################################################## [ 43s] e2fsprogs-libs ################################################## [ 43s] net-tools ################################################## [ 43s] removing nis flags from //etc/nsswitch.conf... [ 43s] now finalizing build dir... [ 44s] build target is armv7l-tizen-linux [ 44s] ----------------------------------------------------------------- [ 44s] I have the following modifications for capi-system-sensor.spec: [ 44s] 5c5 [ 44s] < Release: 10 [ 44s] --- [ 44s] > Release: %{?release_prefix:%{release_prefix}.}2.1 [ 44s] ----------------------------------------------------------------- [ 44s] ----- building capi-system-sensor.spec (user abuild) [ 44s] ----------------------------------------------------------------- [ 44s] ----------------------------------------------------------------- [ 44s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:2.4:Mobile/target-TM1/ddece15a79c1013034da7815943dd8c1-capi-system-sensor' /home/abuild/rpmbuild/SOURCES/capi-system-sensor.spec [ 44s] Building target platforms: armv7l-tizen-linux [ 44s] Building for target armv7l-tizen-linux [ 44s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.A4KMYT [ 44s] + umask 022 [ 44s] + cd /home/abuild/rpmbuild/BUILD [ 44s] + cd /home/abuild/rpmbuild/BUILD [ 44s] + rm -rf capi-system-sensor-0.2.0 [ 44s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/capi-system-sensor-0.2.0.tar.gz [ 44s] + /bin/tar -xf - [ 44s] + STATUS=0 [ 44s] + '[' 0 -ne 0 ']' [ 44s] + cd capi-system-sensor-0.2.0 [ 44s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 44s] + exit 0 [ 44s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.pnG7JS [ 44s] + umask 022 [ 44s] + cd /home/abuild/rpmbuild/BUILD [ 44s] + cd capi-system-sensor-0.2.0 [ 44s] + LANG=C [ 44s] + export LANG [ 44s] + unset DISPLAY [ 44s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 44s] + export CFLAGS [ 44s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 44s] + export CXXFLAGS [ 44s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 44s] + export FFLAGS [ 44s] + LD_AS_NEEDED=1 [ 44s] + export LD_AS_NEEDED [ 44s] + export 'CFLAGS+= -DTIZEN_ENGINEER_MODE' [ 44s] + CFLAGS+=' -DTIZEN_ENGINEER_MODE' [ 44s] ++ echo 0.2.0 [ 44s] ++ awk 'BEGIN {FS="."}{print $1}' [ 44s] + MAJORVER=0 [ 44s] + cmake . -DCMAKE_INSTALL_PREFIX=/usr -DFULLVER=0.2.0 -DMAJORVER=0 [ 45s] -- The C compiler identification is GNU [ 45s] -- The CXX compiler identification is GNU [ 45s] -- Check for working C compiler: /usr/bin/gcc [ 45s] -- Check for working C compiler: /usr/bin/gcc -- works [ 45s] -- Detecting C compiler ABI info [ 45s] -- Detecting C compiler ABI info - done [ 45s] -- Check for working CXX compiler: /usr/bin/c++ [ 45s] -- Check for working CXX compiler: /usr/bin/c++ -- works [ 45s] -- Detecting CXX compiler ABI info [ 45s] -- Detecting CXX compiler ABI info - done [ 45s] -- checking for module 'dlog sensor capi-base-common' [ 45s] -- found dlog sensor capi-base-common, version 1.0;1.2.0;0.2.2 [ 45s] -- Configuring done [ 45s] -- Generating done [ 45s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.0 [ 45s] + make -j8 [ 45s] Scanning dependencies of target capi-system-sensor [ 45s] [ 33%] [ 66%] [100%] Building C object CMakeFiles/capi-system-sensor.dir/src/geomanetic_field.c.o [ 45s] Building CXX object CMakeFiles/capi-system-sensor.dir/src/sensor.cpp.o [ 45s] Building C object CMakeFiles/capi-system-sensor.dir/src/fusion_util.c.o [ 45s] Linking CXX shared library libcapi-system-sensor.so [ 45s] [100%] Built target capi-system-sensor [ 45s] + exit 0 [ 45s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.1JmVfU [ 45s] + umask 022 [ 45s] + cd /home/abuild/rpmbuild/BUILD [ 45s] + cd capi-system-sensor-0.2.0 [ 45s] + LANG=C [ 45s] + export LANG [ 45s] + unset DISPLAY [ 45s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.0-2.1.arm [ 45s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.0-2.1.arm [ 45s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.0-2.1.arm [ 45s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.0-2.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.0-2.1.arm install [ 45s] [100%] Built target capi-system-sensor [ 45s] Install the project... [ 45s] -- Install configuration: "" [ 45s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.0-2.1.arm/usr/lib/libcapi-system-sensor.so.0.2.0 [ 45s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.0-2.1.arm/usr/lib/libcapi-system-sensor.so.0 [ 45s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.0-2.1.arm/usr/lib/libcapi-system-sensor.so [ 45s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.0-2.1.arm/usr/include/sensor [ 45s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.0-2.1.arm/usr/include/sensor/sensor.h [ 45s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.0-2.1.arm/usr/lib/pkgconfig/capi-system-sensor.pc [ 45s] + rm -f /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.0-2.1.arm/usr/share/info/dir [ 45s] + xargs rm -f -- [ 45s] + find /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.0-2.1.arm -regex '.*\.la$' [ 45s] + find /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.0-2.1.arm -regex '.*\.a$' [ 45s] + xargs rm -f -- [ 45s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.0-2.1.arm/usr/share/license [ 45s] + cp LICENSE /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.0-2.1.arm/usr/share/license/capi-system-sensor [ 45s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.0 [ 45s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.0-2.1.arm/usr/lib/libcapi-system-sensor.so.0.2.0 [ 46s] symlinked /usr/lib/debug/usr/lib/libcapi-system-sensor.so.0.2.0.debug to /usr/lib/debug/usr/lib/libcapi-system-sensor.so.debug [ 46s] symlinked /usr/lib/debug/usr/lib/libcapi-system-sensor.so.0.2.0.debug to /usr/lib/debug/usr/lib/libcapi-system-sensor.so.0.debug [ 46s] 141 blocks [ 46s] + /usr/lib/rpm/check-buildroot [ 46s] + /usr/lib/rpm//brp-compress [ 46s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 46s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 46s] + /usr/lib/rpm/brp-python-hardlink [ 46s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.0-2.1.arm [ 46s] Processing files: capi-system-sensor-0.2.0-2.1.armv7l [ 46s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 46s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cgo= [ 46s] [ 46s] Provides: libcapi-system-sensor.so.0 [ 46s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 46s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 46s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 46s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 46s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libm.so.6 libm.so.6(GLIBC_2.4) libsensor.so.1 libstdc++.so.6 libstdc++.so.6(GLIBCXX_3.4) rtld(GNU_HASH) [ 46s] Processing files: capi-system-sensor-debuginfo-0.2.0-2.1.armv7l [ 46s] Processing files: capi-system-sensor-debugsource-0.2.0-2.1.armv7l [ 46s] Processing files: capi-system-sensor-devel-0.2.0-2.1.armv7l [ 46s] Provides: pkgconfig(capi-system-sensor) [ 46s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 46s] Requires: /usr/bin/pkg-config libcapi-system-sensor.so.0 pkgconfig(capi-base-common) [ 46s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.0-2.1.arm [ 46s] Wrote: /home/abuild/rpmbuild/SRPMS/capi-system-sensor-0.2.0-2.1.src.rpm [ 46s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-0.2.0-2.1.armv7l.rpm [ 46s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-debuginfo-0.2.0-2.1.armv7l.rpm [ 46s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-debugsource-0.2.0-2.1.armv7l.rpm [ 46s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-devel-0.2.0-2.1.armv7l.rpm [ 46s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.bX6GXb [ 46s] + umask 022 [ 46s] + cd /home/abuild/rpmbuild/BUILD [ 46s] + cd capi-system-sensor-0.2.0 [ 46s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.0-2.1.arm [ 46s] + exit 0 [ 46s] ... checking for files with abuild user/group [ 46s] ... creating baselibs [ 46s] ... comparing built packages with the former built [ 46s] /usr/lib/build/rpm-check.sh [ 46s] compare /.build.oldpackages/capi-system-sensor-0.2.0-1.2.src.rpm /home/abuild/rpmbuild/SRPMS/capi-system-sensor-0.2.0-2.1.src.rpm [ 46s] --- /tmp/tmp.RSzW3Ti5m1 2016-05-30 22:09:31.457817698 +0000 [ 46s] +++ /tmp/tmp.xrtpyCwy8l 2016-05-30 22:09:31.465817698 +0000 [ 46s] @@ -1,7 +1,7 @@ [ 46s] capi-system-sensor 0.2.0 (none) [ 46s] A Sensor library in TIZEN C API [ 46s] [ 46s] - tizen Tizen:2.4:Mobile / target-TM1 obs://build.tizen.org/Tizen:2.4:Mobile/target-TM1/04566e871da244be60f99806b2f3f565-capi-system-sensor Apache-2.0 and PD Apache-2.0 and PD [ 46s] + tizen Tizen:2.4:Mobile / target-TM1 obs://build.tizen.org/Tizen:2.4:Mobile/target-TM1/ddece15a79c1013034da7815943dd8c1-capi-system-sensor Apache-2.0 and PD Apache-2.0 and PD [ 46s] TO_BE/FILLED_IN (none) (none) (none) (none) [ 46s] (none) 4.9.1 (none) [ 46s] cpio gzip 9 [ 46s] ... saving built statistics [ 46s] ... saving built packages [ 46s] /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-0.2.0-2.1.armv7l.rpm [ 46s] /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-debuginfo-0.2.0-2.1.armv7l.rpm [ 46s] /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-debugsource-0.2.0-2.1.armv7l.rpm [ 46s] /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-devel-0.2.0-2.1.armv7l.rpm [ 46s] /home/abuild/rpmbuild/SRPMS/capi-system-sensor-0.2.0-2.1.src.rpm [ 46s] /home/abuild/rpmbuild/OTHER/_statistics [ 46s] [ 46s] w03 finished "build capi-system-sensor.spec" at Mon May 30 22:09:31 UTC 2016. [ 46s] [ 47s] /.build/build: line 368: 237 Killed background_monitor_process [ 51s] [ 45.767564] SysRq : Power Off [ 51s] [ 46.088154] Power down. [ 52s] build: extracting built packages... [ 52s] capi-system-sensor-0.2.0-2.1.armv7l.rpm [ 52s] capi-system-sensor-debuginfo-0.2.0-2.1.armv7l.rpm [ 52s] capi-system-sensor-debugsource-0.2.0-2.1.armv7l.rpm [ 52s] capi-system-sensor-devel-0.2.0-2.1.armv7l.rpm [ 52s] capi-system-sensor-0.2.0-2.1.src.rpm [ 52s] _statistics