[    0s] Using BUILD_ROOT=/srv/build/root_5/.mount
[    0s] Using BUILD_ARCH=armv7l:armv5tel
[    0s] Doing kvm build in /srv/build/root_5/root
[    0s] 
[    0s] 
[    0s] w12 started "build _service:gbs:ed.spec" at Thu Oct 29 04:44:33 UTC 2015.
[    0s] 
[    0s] Building ed for project 'Tizen:2.4:Mobile' repository 'target-TM1' arch 'armv7l' srcmd5 '67e52598c1cfe4bf356ed7f0595089f1'
[    0s] 
[    0s] processing specfile /srv/build/root_5/.build-srcdir/_service:gbs:ed.spec ...
[    0s] running changelog2spec --target rpm --file /srv/build/root_5/.build-srcdir/_service:gbs:ed.spec
[    0s] init_buildsystem --configdir /var/run/obs/worker/5/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_5/.build.rpmlist /srv/build/root_5/.build-srcdir/_service:gbs:ed.spec build rpmlint-Factory ...
[    0s] registering binfmt handlers for VM
[    0s] /.build/qemu-reg: No such file or directory
[    0s] /.build/qemu-reg: failed. Trying alternate binfmt file
[    0s] write: Invalid argument
[    0s] /proc/sys/fs/binfmt_misc/register: write failed
[    0s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P
[    0s] 
[    0s] /usr/lib/build/qemu-reg: binfmt registration failed
[    0s] cycle: filesystem -> setup
[    0s]   breaking dependency setup -> filesystem
[    0s] cycle: glibc -> glibc-common -> bash
[    0s]   breaking dependency glibc-common -> bash
[    0s] cycle: glibc -> glibc-common -> coreutils -> bash
[    0s]   breaking dependency coreutils -> bash
[    0s] cycle: glibc -> glibc-common -> coreutils
[    0s]   breaking dependency coreutils -> glibc
[    0s] cycle: glibc -> glibc-common -> coreutils -> libacl
[    0s]   breaking dependency libacl -> glibc
[    0s] cycle: glibc -> glibc-common -> coreutils -> libacl -> libattr
[    0s]   breaking dependency libattr -> glibc
[    0s] cycle: libgcc -> glibc -> glibc-common -> coreutils -> libacl -> libattr
[    0s]   breaking dependency libacl -> libattr
[    0s] cycle: libgcc -> glibc -> glibc-common -> coreutils -> libacl
[    0s]   breaking dependency glibc-common -> coreutils
[    0s] cycle: glibc -> glibc-common
[    0s]   breaking dependency glibc -> glibc-common
[    0s] cycle: libgcc -> glibc
[    0s]   breaking dependency libgcc -> glibc
[    0s] cycle: rpm-libs -> rpm
[    0s]   breaking dependency rpm-libs -> rpm
[    0s] [1/52] preinstalling tizen-release...
[    0s] [2/52] preinstalling libgcc...
[    0s] [3/52] preinstalling setup...
[    0s] [4/52] preinstalling filesystem...
[    0s] [5/52] preinstalling glibc...
[    1s] [6/52] preinstalling libattr...
[    1s] [7/52] preinstalling libacl...
[    1s] [8/52] preinstalling bash...
[    1s] [9/52] preinstalling bzip2-libs...
[    1s] [10/52] preinstalling diffutils...
[    1s] [11/52] preinstalling elfutils-libelf...
[    1s] [12/52] preinstalling libcap...
[    1s] [13/52] preinstalling liblua...
[    1s] [14/52] preinstalling libstdc++...
[    1s] [15/52] preinstalling ncurses-libs...
[    1s] [16/52] preinstalling nspr...
[    1s] [17/52] preinstalling nss-softokn-freebl...
[    1s] [18/52] preinstalling popt...
[    1s] [19/52] preinstalling readline...
[    1s] [20/52] preinstalling sed...
[    1s] [21/52] preinstalling sqlite...
[    1s] [22/52] preinstalling xz-libs...
[    1s] [23/52] preinstalling zlib...
[    1s] [24/52] preinstalling glibc-common...
[    1s] [25/52] preinstalling tar...
[    1s] [26/52] preinstalling coreutils...
[    1s] [27/52] preinstalling qemu-linux-user-x86-arm...
[    1s] [28/52] preinstalling tizen-accelerator...
[    1s] [29/52] preinstalling libfile...
[    1s] [30/52] preinstalling bzip2...
[    1s] [31/52] preinstalling nss...
[    1s] [32/52] preinstalling bzip2-libs-x86-arm...
[    1s] [33/52] preinstalling elfutils-libelf-x86-arm...
[    1s] [34/52] preinstalling glibc-x86-arm...
[    1s] [35/52] preinstalling libacl-x86-arm...
[    1s] [36/52] preinstalling libattr-x86-arm...
[    1s] [37/52] preinstalling libcap-x86-arm...
[    1s] [38/52] preinstalling libgcc-x86-arm...
[    1s] [39/52] preinstalling liblua-x86-arm...
[    1s] [40/52] preinstalling ncurses-libs-x86-arm...
[    1s] [41/52] preinstalling nspr-x86-arm...
[    1s] [42/52] preinstalling nss-softokn-freebl-x86-arm...
[    1s] [43/52] preinstalling nss-x86-arm...
[    1s] [44/52] preinstalling popt-x86-arm...
[    1s] [45/52] preinstalling sqlite-x86-arm...
[    2s] [46/52] preinstalling xz-libs-x86-arm...
[    2s] [47/52] preinstalling zlib-x86-arm...
[    2s] [48/52] preinstalling rpm-libs...
[    2s] [49/52] preinstalling bash-x86-arm...
[    2s] [50/52] preinstalling rpm-libs-x86-arm...
[    2s] [51/52] preinstalling rpm...
[    2s] [52/52] preinstalling rpm-x86-arm...
[    2s] 
[    2s] cycle: perl -> perl-libs
[    2s]   breaking dependency perl-libs -> perl
[    2s] [1/8] preinstalling e2fsprogs-libs...
[    2s] [2/8] preinstalling libpcre...
[    2s] [3/8] preinstalling libuuid...
[    2s] [4/8] preinstalling grep...
[    2s] [5/8] preinstalling libblkid...
[    2s] [6/8] preinstalling util-linux...
[    2s] [7/8] preinstalling perl-libs...
[    2s] [8/8] preinstalling perl...
[    2s] copying packages...
[    3s] reordering...cycle: bash -> glibc -> glibc-common
[    5s]   breaking dependency glibc-common -> bash
[    5s] cycle: bash -> glibc -> glibc-common -> coreutils
[    5s]   breaking dependency glibc-common -> coreutils
[    5s] cycle: glibc -> glibc-common -> findutils
[    5s]   breaking dependency glibc-common -> findutils
[    5s] cycle: glibc -> glibc-common
[    5s]   breaking dependency glibc-common -> glibc
[    5s] cycle: glibc -> glibc-common -> grep
[    5s]   breaking dependency grep -> glibc
[    5s] cycle: glibc -> glibc-common -> grep -> libgcc
[    5s]   breaking dependency grep -> libgcc
[    5s] cycle: glibc -> glibc-common -> grep -> libpcre
[    5s]   breaking dependency libpcre -> glibc
[    5s] cycle: glibc -> glibc-common -> grep -> libpcre -> libgcc
[    5s]   breaking dependency libpcre -> libgcc
[    5s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++
[    5s]   breaking dependency libstdc++ -> glibc
[    5s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++ -> libgcc
[    5s]   breaking dependency glibc -> glibc-common
[    5s] cycle: glibc -> libgcc
[    5s]   breaking dependency libgcc -> glibc
[    5s] cycle: filesystem -> setup
[    5s]   breaking dependency setup -> filesystem
[    5s] cycle: ncurses -> ncurses-libs
[    5s]   breaking dependency ncurses-libs -> ncurses
[    5s] cycle: ncurses-base -> ncurses -> ncurses-libs
[    5s]   breaking dependency ncurses-libs -> ncurses-base
[    5s] cycle: perl -> perl-libs
[    5s]   breaking dependency perl -> perl-libs
[    5s] cycle: perl -> perl-IO-Compress-Zlib
[    5s]   breaking dependency perl -> perl-IO-Compress-Zlib
[    5s] cycle: perl -> perl-IO-Compress-Base
[    5s]   breaking dependency perl -> perl-IO-Compress-Base
[    5s] cycle: perl -> perl-Module-Pluggable
[    5s]   breaking dependency perl -> perl-Module-Pluggable
[    5s] cycle: perl -> perl-Pod-Simple
[    5s]   breaking dependency perl -> perl-Pod-Simple
[    5s] cycle: nss -> nss-sysinit
[    5s]   breaking dependency nss -> nss-sysinit
[    5s] cycle: rpm-libs -> rpm
[    5s]   breaking dependency rpm-libs -> rpm
[    5s] done
[   11s] booting kvm ...
[   11s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 8000 -drive file=/srv/build/root_5/root,if=virtio,cache=none -drive file=/srv/build/root_5/root,if=ide,index=0,cache=none -drive file=/srv/build/root_5/swap,if=virtio,cache=none -smp 4
[   19s] [    0.000000] tsc: Fast TSC calibration failed
[   20s] doing fast boot
[   21s] Creating device nodes with udev
[   27s] Waiting for device /dev/vda to appear:  ok
[   27s] fsck from util-linux 2.21.2
[   27s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda 
[   27s] /dev/vda: clean, 4679/2392064 files, 223834/9568256 blocks
[   27s] fsck succeeded. Mounting root device read-write.
[   27s] Mounting root /dev/vda
[   27s] mount -o rw -t ext4 /dev/vda /root
[   29s] replacing /etc/mtab with symlink to /proc/self/mounts
[   29s] /.build/qemu-reg: line 9: interpreter '/usr/bin/qemu-armeb-binfmt' not found, ignoring
[   29s] /.build/qemu-reg: line 10: interpreter '/usr/bin/qemu-ppc-binfmt' not found, ignoring
[   29s] /.build/qemu-reg: line 11: interpreter '/usr/bin/qemu-mips-binfmt' not found, ignoring
[   29s] /.build/qemu-reg: line 12: interpreter '/usr/bin/qemu-mipsel-binfmt' not found, ignoring
[   29s] /.build/qemu-reg: line 18: interpreter '/usr/bin/qemu-sh4-binfmt' not found, ignoring
[   29s] /.build/qemu-reg: line 19: interpreter '/usr/bin/qemu-sh4eb-binfmt' not found, ignoring
[   30s] 2nd stage started in virtual machine
[   30s] machine type: armv7l
[   30s] swapon on /dev/vdb
[   30s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order
[   30s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648
[   30s] VM_IMAGE: , VM_SWAP: /dev/vdb
[   30s] logging output to //.build.log...
[   30s] processing specfile /.build-srcdir/_service:gbs:ed.spec ...
[   30s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:ed.spec build rpmlint-Factory ...
[   31s] running rpm-x86-arm postinstall script
[   31s] running rpm-libs-x86-arm postinstall script
[   31s] running tizen-accelerator postinstall script
[   31s] running glibc-x86-arm postinstall script
[   32s] running bash-x86-arm postinstall script
[   32s] initializing rpm db...
[   39s] [1/169] cumulate cross-armv7l-platformfile-0.0.1-1.1
[   39s] [2/169] cumulate kernel-headers-3.4.91-1.1
[   40s] [3/169] cumulate tizen-release-2.2.0-1.1
[   40s] [4/169] cumulate tzdata-2014j-1.1
[   40s] [5/169] cumulate libgcc-4.9.2-2015.02.1.11
[   40s] [6/169] cumulate setup-0.2-1.1
[   40s] [7/169] cumulate filesystem-0.1-1.1
[   41s] [8/169] cumulate glibc-2.20-2014.11.1.10
[   41s] [9/169] cumulate libstdc++-4.9.2-2015.02.1.11
[   41s] [10/169] cumulate libatomic-4.9.2-2015.02.1.11
[   41s] [11/169] cumulate libgomp-4.9.2-2015.02.1.11
[   41s] [12/169] cumulate openssl-1.0.1p-1.5
[   42s] [13/169] cumulate bash-4.1-1.6
[   42s] [14/169] cumulate bzip2-libs-1.0.5-1.8
[   42s] [15/169] cumulate cpio-2.8-1.6
[   44s] [16/169] cumulate db4-4.8.30-1.8
[   44s] [17/169] cumulate diffutils-3.0-1.6
[   44s] [18/169] cumulate e2fsprogs-libs-1.41.9-1.4
[   45s] [19/169] cumulate elfutils-libelf-0.152-1.12
[   45s] [20/169] cumulate expat-2.0.1-1.8
[   46s] [21/169] cumulate fdupes-1.40-1.5
[   46s] [22/169] cumulate findutils-4.2.31-1.5
[   46s] [23/169] cumulate gdbm-1.8.3-1.12
[   46s] [24/169] cumulate libattr-2.4.44-1.8
[   46s] [25/169] cumulate libitm-4.9.2-2015.02.1.11
[   46s] [26/169] cumulate liblua-5.1.4-1.6
[   46s] [27/169] cumulate libuuid-2.20.2-1.4
[   47s] [28/169] cumulate m4-1.4.14-1.5
[   47s] [29/169] cumulate net-tools-1.60-2.6
[   47s] [30/169] cumulate nspr-4.9-1.9
[   47s] [31/169] cumulate nss-softokn-freebl-3.12.9-1.17
[   48s] [32/169] cumulate patch-2.6-1.6
[   48s] [33/169] cumulate pkg-config-0.25-2.6
[   48s] [34/169] cumulate popt-1.16-1.8
[   48s] [35/169] cumulate readline-5.2-1.6
[   49s] [36/169] cumulate ruby-1.9.2-1.6
[   50s] [37/169] cumulate sed-4.1.5-1.5
[   50s] [38/169] cumulate sqlite-3.8.10.2-1.8
[   50s] [39/169] cumulate xz-libs-5.0.3-1.8
[   50s] [40/169] cumulate zlib-1.2.8-1.8
[   51s] [41/169] cumulate libasan-4.9.2-2015.02.1.11
[   51s] [42/169] cumulate libpcre-7.7-1.25
[   51s] [43/169] cumulate libubsan-4.9.2-2015.02.1.11
[   51s] [44/169] cumulate patchelf-0.5.svn20809-1.5
[   51s] [45/169] cumulate ncurses-libs-5.7-1.8
[   52s] [46/169] cumulate build-compare-2009.10.14-1.6
[   52s] [47/169] cumulate qemu-linux-user-x86-arm-2.2.0-4.1.1
[   52s] [48/169] cumulate cpp-4.9.2-2015.02.1.11
[   52s] [49/169] cumulate glibc-headers-2.20-2014.11.1.10
[   52s] [50/169] cumulate libcap-2.21-1.6
[   52s] [51/169] cumulate unzip-6.0-1.12
[   53s] [52/169] cumulate grep-2.5.1a-1.5
[   53s] [53/169] cumulate libacl-2.2.49-1.5
[   53s] [54/169] cumulate libfile-5.04-1.7
[   54s] [55/169] cumulate libpython-2.7.1-1.5
[   54s] [56/169] cumulate libxml2-2.9.2-1.3
[   54s] [57/169] cumulate make-3.82-154.1.6
[   55s] [58/169] cumulate ncurses-5.7-1.8
[   55s] [59/169] cumulate pcre-7.7-1.25
[   55s] [60/169] cumulate psmisc-22.20-1.6
[   55s] [61/169] cumulate binutils-2.25.0-2015.01.1.8
[   55s] [62/169] cumulate bzip2-1.0.5-1.8
[   56s] [63/169] cumulate libblkid-2.20.2-1.4
[   56s] [64/169] cumulate xz-5.0.3-1.8
[   56s] [65/169] cumulate elfutils-libs-0.152-1.12
[   56s] [66/169] cumulate nss-3.12.9-1.17
[   57s] [67/169] cumulate perl-5.12.1-1.25
[   57s] [68/169] cumulate ncurses-base-5.7-1.8
[   57s] [69/169] cumulate perl-HTML-Tagset-3.20-1.1
[   57s] [70/169] cumulate perl-IO-Compress-Base-2.008-1.25
[   57s] [71/169] cumulate perl-Module-Pluggable-3.60-1.25
[   58s] [72/169] cumulate perl-Pod-Escapes-1.04-1.25
[   58s] [73/169] cumulate perl-TimeDate-1.20-1.1
[   58s] [74/169] cumulate perl-URI-1.54-1.1
[   58s] [75/169] cumulate glibc-devel-2.20-2014.11.1.10
[   58s] [76/169] cumulate file-5.04-1.7
[   58s] [77/169] cumulate libxslt-1.1.28-1.2
[   59s] [78/169] cumulate perl-Compress-Raw-Zlib-2.008-1.25
[   59s] [79/169] cumulate perl-libs-5.12.1-1.25
[   59s] [80/169] cumulate tar-1.17-1.6
[   59s] [81/169] cumulate coreutils-6.9-1.6
[   59s] [82/169] cumulate libmount-2.20.2-1.4
[   59s] [83/169] cumulate xz-lzma-compat-5.0.3-1.8
[   59s] [84/169] cumulate elfutils-0.152-1.12
[   60s] [85/169] cumulate nss-sysinit-3.12.9-1.17
[   60s] [86/169] cumulate python-base-2.7.1-1.5
[   60s] [87/169] cumulate glibc-common-2.20-2014.11.1.10
[   60s] [88/169] cumulate libarchive-2.8.3-1.2
[   60s] [89/169] cumulate rpm-libs-4.9.1-4.3.1.10
[   61s] [90/169] cumulate libstdc++-devel-4.9.2-2015.02.1.11
[   61s] [91/169] cumulate perl-Pod-Simple-3.07-1.25
[   61s] [92/169] cumulate tizen-accelerator-1.0.1-1.1
[   62s] [93/169] cumulate perl-IO-Compress-Zlib-2.008-1.25
[   62s] [94/169] cumulate gawk-3.1.5-1.6
[   62s] [95/169] cumulate gzip-1.3.12-1.6
[   62s] [96/169] cumulate perl-HTML-Parser-3.65-1.5
[   62s] [97/169] cumulate python-xml-2.7.1-1.5
[   63s] [98/169] cumulate autoconf-2.68-1.1
[   63s] [99/169] cumulate build-2011.01.10a-1.1
[   63s] [100/169] installing rpm-4.9.1-4.3.1.10
[   65s] [101/169] cumulate python-lxml-2.2.3-1.2
[   65s] [102/169] cumulate util-linux-2.20.2-1.4
[   65s] [103/169] cumulate cmake-2.8.5-1.1.2
[   66s] [104/169] cumulate python-2.7.1-1.3
[   66s] [105/169] cumulate gcc-4.9.2-2015.02.1.11
[   66s] [106/169] cumulate automake-1.11.1-1.1
[   66s] [107/169] cumulate bzip2-libs-x86-arm-1.0.5-9.1.4
[   66s] [108/169] cumulate elfutils-libelf-x86-arm-0.152-9.1.4
[   66s] [109/169] cumulate elfutils-libs-x86-arm-0.152-9.1.4
[   67s] [110/169] cumulate expat-x86-arm-2.0.1-1.4
[   67s] [111/169] cumulate glibc-x86-arm-2.20-9.1.5
[   67s] [112/169] cumulate libacl-x86-arm-2.2.49-9.1.4
[   67s] [113/169] cumulate libarchive-x86-arm-2.8.3-1.3
[   67s] [114/169] cumulate libattr-x86-arm-2.4.44-9.1.4
[   67s] [115/169] cumulate libcap-x86-arm-2.21-9.1.4
[   67s] [116/169] cumulate libfile-x86-arm-5.04-9.1.4
[   67s] [117/169] cumulate libgcc-x86-arm-4.9.2-9.1.4
[   68s] [118/169] cumulate liblua-x86-arm-5.1.4-9.1.3
[   68s] [119/169] cumulate libpython-x86-arm-2.7.1-9.1.3
[   70s] [120/169] cumulate libstdc++-x86-arm-4.9.2-9.1.4
[   70s] [121/169] cumulate libxml2-x86-arm-2.9.2-9.1.3
[   70s] [122/169] cumulate libxslt-x86-arm-1.1.28-9.1.3
[   70s] [123/169] cumulate ncurses-libs-x86-arm-5.7-9.1.3
[   70s] [124/169] cumulate nspr-x86-arm-4.9-9.1.5
[   70s] [125/169] cumulate nss-softokn-freebl-x86-arm-3.12.9-9.1.5
[   71s] [126/169] cumulate nss-x86-arm-3.12.9-9.1.5
[   72s] [127/169] cumulate openssl-x86-arm-1.0.1p-9.1.3
[   75s] [128/169] cumulate perl-libs-x86-arm-5.12.1-9.1.5
[   76s] [129/169] cumulate popt-x86-arm-1.16-9.1.4
[   76s] [130/169] cumulate python-lxml-x86-arm-2.2.3-9.1.3
[   76s] [131/169] cumulate python-x86-arm-2.7.1-9.1.3
[   76s] [132/169] cumulate python-xml-x86-arm-2.7.1-9.1.3
[   76s] [133/169] cumulate rpm-libs-x86-arm-4.9.1-9.1.4
[   77s] [134/169] cumulate sqlite-x86-arm-3.8.10.2-9.1.3
[   77s] [135/169] cumulate xz-libs-x86-arm-5.0.3-9.1.4
[   77s] [136/169] cumulate zlib-x86-arm-1.2.8-9.1.4
[   79s] [137/169] cumulate gcc-c++-4.9.2-2015.02.1.11
[   79s] [138/169] cumulate perl-Compress-Zlib-2.008-1.25
[   79s] [139/169] cumulate rpm-build-4.9.1-4.3.1.10
[   79s] [140/169] cumulate bash-x86-arm-4.1-9.1.4
[   80s] [141/169] cumulate diffutils-x86-arm-3.0-9.1.4
[   80s] [142/169] cumulate fdupes-x86-arm-1.40-9.1.4
[   81s] [143/169] cumulate findutils-x86-arm-4.2.31-9.1.4
[   81s] [144/169] cumulate gawk-x86-arm-3.1.5-9.1.3
[   82s] [145/169] cumulate gzip-x86-arm-1.3.12-9.1.4
[   82s] [146/169] cumulate libtool-2.2.6b-1.8
[   82s] [147/169] cumulate m4-x86-arm-1.4.14-9.1.4
[   82s] [148/169] cumulate make-x86-arm-3.82-9.1.3
[   82s] [149/169] cumulate patch-x86-arm-2.6-9.1.4
[   83s] [150/169] cumulate perl-libwww-perl-5.836-1.1
[   83s] [151/169] cumulate pkg-config-x86-arm-0.25-9.1.4
[   83s] [152/169] cumulate ruby-x86-arm-1.9.2-9.1.4
[   83s] [153/169] cumulate sed-x86-arm-4.1.5-9.1.4
[   83s] [154/169] cumulate bzip2-x86-arm-1.0.5-1.4
[   83s] [155/169] cumulate perl-x86-arm-5.12.1-9.1.5
[   84s] [156/169] cumulate python-base-x86-arm-2.7.1-9.1.3
[   84s] [157/169] cumulate coreutils-x86-arm-6.9-9.1.4
[   85s] [158/169] cumulate cross-armv7l-gcc-accel-x86-armv7l-4.9.2-2015.02.1.6
[   85s] [159/169] cumulate file-x86-arm-5.04-9.1.4
[   85s] [160/169] cumulate tar-x86-arm-1.17-9.1.4
[   85s] [161/169] cumulate elfutils-x86-arm-0.152-9.1.4
[   87s] [162/169] cumulate cmake-x86-arm-2.8.5-1.3
[   87s] [163/169] cumulate rpm-x86-arm-4.9.1-9.1.4
[   87s] [164/169] cumulate rpm-build-x86-arm-4.9.1-9.1.4
[   87s] [165/169] cumulate perl-HTML-Parser-x86-arm-3.65-9.1.3
[   87s] [166/169] cumulate cross-armv7l-binutils-accel-x86-armv7l-2.25.0-2015.01.1.3
[   87s] [167/169] cumulate perl-XML-Parser-2.36-1.6
[   87s] [168/169] cumulate perl-XML-Parser-x86-arm-2.36-9.1.3
[   87s] [169/169] now installing cumulated packages
[  109s] Preparing...                ##################################################
[  112s] setup                       ##################################################
[  121s] filesystem                  ##################################################
[  122s] tzdata                      ##################################################
[  123s] tizen-release               ##################################################
[  123s] kernel-headers              ##################################################
[  123s] cross-armv7l-platformfile   ##################################################
[  123s] bash                        ##################################################
[  124s] findutils                   ##################################################
[  125s] grep                        ##################################################
[  125s] coreutils                   ##################################################
[  135s] glibc-common                ##################################################
[  135s] libgcc                      ##################################################
[  135s] /sbin/ldconfig: relative path `1' used to build cache
[  135s] warning: %post(libgcc-4.9.2-2015.02.1.11.armv7l) scriptlet failed, exit status 1
[  136s] glibc                       ##################################################
[  137s] libstdc++                   ##################################################
[  137s] libattr                     ##################################################
[  137s] libacl                      ##################################################
[  137s] libpcre                     ##################################################
[  137s] tizen-accelerator           ##################################################
[  138s] glibc-x86-arm               ##################################################
[  139s] libattr-x86-arm             ##################################################
[  139s] libacl-x86-arm              ##################################################
[  140s] libgcc-x86-arm              ##################################################
[  140s] libstdc++-x86-arm           ##################################################
[  141s] glibc-headers               ##################################################
[  141s] glibc-devel                 ##################################################
[  142s] libstdc++-devel             ##################################################
[  143s] coreutils-x86-arm           ##################################################
[  146s] bash-x86-arm                ##################################################
[  146s] findutils-x86-arm           ##################################################
[  146s] build-compare               ##################################################
[  148s] qemu-linux-user-x86-arm     ##################################################
[  148s] zlib                        ##################################################
[  148s] zlib-x86-arm                ##################################################
[  149s] bzip2-libs                  ##################################################
[  149s] bzip2-libs-x86-arm          ##################################################
[  149s] elfutils-libelf             ##################################################
[  149s] xz-libs                     ##################################################
[  149s] ncurses-libs                ##################################################
[  149s] ncurses                     ##################################################
[  150s] ncurses-base                ##################################################
[  150s] libpython                   ##################################################
[  151s] python-base                 ##################################################
[  151s] libxml2                     ##################################################
[  152s] binutils                    ##################################################
[  152s] xz-libs-x86-arm             ##################################################
[  152s] elfutils-libelf-x86-arm     ##################################################
[  152s] libfile                     ##################################################
[  152s] openssl                     ##################################################
[  153s] expat                       ##################################################
[  153s] libuuid                     ##################################################
[  153s] nspr                        ##################################################
[  154s] popt                        ##################################################
[  154s] sed                         ##################################################
[  154s] sqlite                      ##################################################
[  154s] popt-x86-arm                ##################################################
[  155s] nspr-x86-arm                ##################################################
[  155s] libfile-x86-arm             ##################################################
[  155s] libblkid                    ##################################################
[  155s] libarchive                  ##################################################
[  155s] file                        ##################################################
[  155s] libxslt                     ##################################################
[  155s] xz                          ##################################################
[  155s] elfutils-libs               ##################################################
[  156s] elfutils                    ##################################################
[  156s] bzip2                       ##################################################
[  156s] tar                         ##################################################
[  156s] libcap                      ##################################################
[  156s] libcap-x86-arm              ##################################################
[  156s] diffutils                   ##################################################
[  156s] liblua                      ##################################################
[  156s] liblua-x86-arm              ##################################################
[  156s] m4                          ##################################################
[  157s] nss-softokn-freebl          ##################################################
[  157s] nss                         ##################################################
[  157s] nss-sysinit                 ##################################################
[  158s] nss-x86-arm                 ##################################################
[  158s] rpm-libs                    ##################################################
[  158s] rpm-libs-x86-arm            ##################################################
[  158s] patch                       ##################################################
[  158s] pkg-config                  ##################################################
[  158s] gawk                        ##################################################
[  158s] gzip                        ##################################################
[  158s] elfutils-libs-x86-arm       ##################################################
[  158s] libarchive-x86-arm          ##################################################
[  159s] openssl-x86-arm             ##################################################
[  159s] libxml2-x86-arm             ##################################################
[  159s] libpython-x86-arm           ##################################################
[  159s] xz-lzma-compat              ##################################################
[  160s] python-lxml                 ##################################################
[  161s] cmake                       ##################################################
[  161s] libmount                    ##################################################
[  161s] python-xml                  ##################################################
[  162s] cpp                         ##################################################
[  162s] libasan                     ##################################################
[  163s] libubsan                    ##################################################
[  163s] libatomic                   ##################################################
[  164s] libgomp                     ##################################################
[  164s] cpio                        ##################################################
[  166s] db4                         ##################################################
[  167s] fdupes                      ##################################################
[  167s] gdbm                        ##################################################
[  167s] perl-Pod-Escapes            ##################################################
[  168s] perl-Compress-Raw-Zlib      ##################################################
[  169s] perl-IO-Compress-Base       ##################################################
[  169s] perl-Module-Pluggable       ##################################################
[  169s] perl-Pod-Simple             ##################################################
[  169s] perl-IO-Compress-Zlib       ##################################################
[  170s] perl-libs                   ##################################################
[  179s] perl                        ##################################################
[  180s] perl-URI                    ##################################################
[  180s] autoconf                    ##################################################
[  180s] automake                    ##################################################
[  180s] perl-HTML-Tagset            ##################################################
[  180s] perl-TimeDate               ##################################################
[  180s] perl-Compress-Zlib          ##################################################
[  181s] perl-libs-x86-arm           ##################################################
[  182s] perl-x86-arm                ##################################################
[  183s] perl-HTML-Parser            ##################################################
[  183s] perl-libwww-perl            ##################################################
[  183s] perl-XML-Parser             ##################################################
[  183s] libitm                      ##################################################
[  184s] gcc                         ##################################################
[  184s] gcc-c++                     ##################################################
[  190s] cross-armv7l-gcc-accel-x86-a##################################################
[  190s] "GCCVER: 4.9 GCCVER_NEW: 4.9 "
[  190s] GCC and GCC-accel versions match. Enabling cross-compiler.
[  191s] readline                    ##################################################
[  191s] python                      ##################################################
[  191s] ruby                        ##################################################
[  191s] unzip                       ##################################################
[  191s] rpm-build                   ##################################################
[  192s] make                        ##################################################
[  192s] make-x86-arm                ##################################################
[  192s] rpm-build-x86-arm           ##################################################
[  193s] ruby-x86-arm                ##################################################
[  193s] python-x86-arm              ##################################################
[  194s] cross-armv7l-binutils-accel-##################################################
[  194s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/addr2line': File exists
[  194s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ar': File exists
[  194s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/as': File exists
[  194s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/c++filt': File exists
[  194s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/elfedit': File exists
[  194s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/gprof': File exists
[  195s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld': File exists
[  195s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld.bfd': File exists
[  195s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld.gold': File exists
[  195s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/nm': File exists
[  195s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/objcopy': File exists
[  195s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/objdump': File exists
[  195s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ranlib': File exists
[  195s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/readelf': File exists
[  195s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/size': File exists
[  195s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/strings': File exists
[  195s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/strip': File exists
[  195s] perl-XML-Parser-x86-arm     ##################################################
[  195s] perl-HTML-Parser-x86-arm    ##################################################
[  195s] build                       ##################################################
[  196s] libtool                     ##################################################
[  196s] fdupes-x86-arm              ##################################################
[  196s] python-xml-x86-arm          ##################################################
[  197s] cmake-x86-arm               ##################################################
[  198s] python-lxml-x86-arm         ##################################################
[  199s] python-base-x86-arm         ##################################################
[  200s] elfutils-x86-arm            ##################################################
[  200s] gzip-x86-arm                ##################################################
[  200s] gawk-x86-arm                ##################################################
[  200s] pkg-config-x86-arm          ##################################################
[  200s] patch-x86-arm               ##################################################
[  202s] rpm-x86-arm                 ##################################################
[  202s] /bin/rpm.orig-arm already present - skipping.
[  202s] /usr/bin/rpm2cpio.orig-arm already present - skipping.
[  202s] /usr/bin/rpmdb.orig-arm already present - skipping.
[  202s] /usr/bin/rpmquery.orig-arm already present - skipping.
[  202s] /usr/bin/rpmsign.orig-arm already present - skipping.
[  202s] /usr/bin/rpmverify.orig-arm already present - skipping.
[  202s] nss-softokn-freebl-x86-arm  ##################################################
[  202s] m4-x86-arm                  ##################################################
[  202s] diffutils-x86-arm           ##################################################
[  202s] tar-x86-arm                 ##################################################
[  202s] bzip2-x86-arm               ##################################################
[  202s] libxslt-x86-arm             ##################################################
[  202s] mv: cannot stat `/usr/bin/xsltproc': No such file or directory
[  202s] file-x86-arm                ##################################################
[  202s] sqlite-x86-arm              ##################################################
[  202s] sed-x86-arm                 ##################################################
[  203s] expat-x86-arm               ##################################################
[  203s] ncurses-libs-x86-arm        ##################################################
[  204s] util-linux                  ##################################################
[  204s] psmisc                      ##################################################
[  204s] pcre                        ##################################################
[  204s] patchelf                    ##################################################
[  204s] e2fsprogs-libs              ##################################################
[  205s] net-tools                   ##################################################
[  205s] removing nis flags from //etc/nsswitch.conf...
[  205s] now finalizing build dir...
[  210s] Warning: spec file parser line 13: can't expand %(...)
[  211s] build target is armv7l-tizen-linux
[  211s] -----------------------------------------------------------------
[  211s] I have the following modifications for ed.spec:
[  211s] 6c6
[  211s] < Release: 1
[  211s] ---
[  211s] > Release: %{?release_prefix:%{release_prefix}.}1.1
[  211s] 60a61
[  211s] > %changelog
[  211s] -----------------------------------------------------------------
[  211s] ----- building ed.spec (user abuild)
[  211s] -----------------------------------------------------------------
[  211s] -----------------------------------------------------------------
[  211s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:2.4:Mobile/target-TM1/67e52598c1cfe4bf356ed7f0595089f1-ed' /home/abuild/rpmbuild/SOURCES/ed.spec
[  211s] sh: @__ID_U@: command not found
[  211s] Building target platforms: armv7l-tizen-linux
[  211s] Building for target armv7l-tizen-linux
[  211s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.9HSxib
[  211s] + umask 022
[  211s] + cd /home/abuild/rpmbuild/BUILD
[  211s] + cd /home/abuild/rpmbuild/BUILD
[  211s] + rm -rf ed-1.4
[  211s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/ed-1.4.tar.gz
[  211s] + /bin/tar -xf -
[  211s] + STATUS=0
[  211s] + '[' 0 -ne 0 ']'
[  211s] + cd ed-1.4
[  211s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w .
[  211s] + rm -f stamp-h.in
[  211s] + exit 0
[  211s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.zYv7og
[  211s] + umask 022
[  211s] + cd /home/abuild/rpmbuild/BUILD
[  211s] + cd ed-1.4
[  211s] + LANG=C
[  211s] + export LANG
[  211s] + unset DISPLAY
[  211s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb'
[  211s] + export CFLAGS
[  211s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb'
[  211s] + export CXXFLAGS
[  211s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir'
[  211s] + export FFLAGS
[  211s] + LD_AS_NEEDED=1
[  211s] + export LD_AS_NEEDED
[  211s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb'
[  211s] + export CFLAGS
[  211s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb'
[  211s] + export CXXFLAGS
[  211s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir'
[  211s] + export FFLAGS
[  211s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --exec-prefix=/
[  211s] 
[  211s] creating config.status
[  211s] creating Makefile
[  211s] VPATH = .
[  211s] prefix = /usr
[  211s] exec_prefix = 
[  211s] bindir = /usr/bin
[  211s] datadir = /usr/share
[  211s] infodir = /usr/share/info
[  211s] mandir = /usr/share/man
[  211s] sysconfdir = /etc
[  211s] program_prefix = 
[  211s] CC = gcc
[  211s] CXX = g++
[  211s] CPPFLAGS = 
[  211s] CFLAGS = -Wall -W -O2
[  211s] CXXFLAGS = -Wall -W -O2
[  211s] LDFLAGS = 
[  211s] OK. Now you can run make.
[  211s] + make -j4 'CFLAGS=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb'
[  211s] gcc  -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -c -o buffer.o buffer.c
[  211s] gcc  -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -c -o carg_parser.o carg_parser.c
[  211s] gcc  -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -c -o global.o global.c
[  211s] gcc  -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -c -o io.o io.c
[  211s] gcc  -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DPROGVERSION=\"1.4\" -c -o main.o main.c
[  211s] gcc  -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -c -o main_loop.o main_loop.c
[  211s] gcc  -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -c -o regex.o regex.c
[  211s] main_loop.c: In function 'exec_command':
[  211s] main_loop.c:585:15: warning: ignoring return value of 'system', declared with attribute warn_unused_result [-Wunused-result]
[  211s]                system( shcmd + 1 );
[  211s]                ^
[  211s] gcc  -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -c -o signal.o signal.c
[  212s] gcc  -o ed buffer.o carg_parser.o global.o io.o main.o main_loop.o regex.o signal.o
[  212s] + exit 0
[  212s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.nhrBZn
[  212s] + umask 022
[  212s] + cd /home/abuild/rpmbuild/BUILD
[  212s] + cd ed-1.4
[  212s] + LANG=C
[  212s] + export LANG
[  212s] + unset DISPLAY
[  212s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/ed-1.4-1.1.arm
[  212s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/ed-1.4-1.1.arm
[  212s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/ed-1.4-1.1.arm
[  212s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/ed-1.4-1.1.arm/usr/share/man/man1
[  212s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/ed-1.4-1.1.arm bindir=/bin mandir=/usr/share/man/man1
[  212s] if test ! -d /home/abuild/rpmbuild/BUILDROOT/ed-1.4-1.1.arm/usr/share/info ; then install -d -m 755 /home/abuild/rpmbuild/BUILDROOT/ed-1.4-1.1.arm/usr/share/info ; fi
[  212s] install -p -m 644 ./doc/ed.info /home/abuild/rpmbuild/BUILDROOT/ed-1.4-1.1.arm/usr/share/info/ed.info
[  212s] install-info --info-dir=/home/abuild/rpmbuild/BUILDROOT/ed-1.4-1.1.arm/usr/share/info /home/abuild/rpmbuild/BUILDROOT/ed-1.4-1.1.arm/usr/share/info/ed.info
[  212s] make: install-info: Command not found
[  212s] make: [install-info] Error 127 (ignored)
[  212s] if test ! -d /home/abuild/rpmbuild/BUILDROOT/ed-1.4-1.1.arm/usr/share/man/man1/man1 ; then install -d -m 755 /home/abuild/rpmbuild/BUILDROOT/ed-1.4-1.1.arm/usr/share/man/man1/man1 ; fi
[  212s] install -p -m 644 ./doc/ed.1 /home/abuild/rpmbuild/BUILDROOT/ed-1.4-1.1.arm/usr/share/man/man1/man1/ed.1
[  212s] rm -f /home/abuild/rpmbuild/BUILDROOT/ed-1.4-1.1.arm/usr/share/man/man1/man1/red.1
[  212s] cd /home/abuild/rpmbuild/BUILDROOT/ed-1.4-1.1.arm/usr/share/man/man1/man1 && ln -s ed.1 red.1
[  212s] if test ! -d /home/abuild/rpmbuild/BUILDROOT/ed-1.4-1.1.arm/bin ; then install -d -m 755 /home/abuild/rpmbuild/BUILDROOT/ed-1.4-1.1.arm/bin ; fi
[  212s] install -p -m 755 ./ed /home/abuild/rpmbuild/BUILDROOT/ed-1.4-1.1.arm/bin/ed
[  212s] rm -f /home/abuild/rpmbuild/BUILDROOT/ed-1.4-1.1.arm/bin/red
[  212s] cd /home/abuild/rpmbuild/BUILDROOT/ed-1.4-1.1.arm/bin && ln -s ed red
[  212s] + rm -f '/home/abuild/rpmbuild/BUILDROOT/ed-1.4-1.1.arm/usr/share/info/dir*'
[  212s] + gzip -9qnf /home/abuild/rpmbuild/BUILDROOT/ed-1.4-1.1.arm/usr/share/info/ed.info
[  212s] + install -p -m0644 doc/ed.1 /home/abuild/rpmbuild/BUILDROOT/ed-1.4-1.1.arm/usr/share/man/man1
[  212s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/ed-1.4
[  212s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/ed-1.4-1.1.arm/bin/ed
[  212s] symlinked /usr/lib/debug/bin/ed.debug to /usr/lib/debug/bin/red.debug
[  212s] 185 blocks
[  212s] + /usr/lib/rpm/check-buildroot
[  212s] + /usr/lib/rpm//brp-compress
[  212s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip
[  212s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump
[  212s] + /usr/lib/rpm/brp-python-hardlink
[  212s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/ed-1.4-1.1.arm
[  212s] Processing files: ed-1.4-1.1.armv7l
[  212s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.rxejEx
[  212s] + umask 022
[  212s] + cd /home/abuild/rpmbuild/BUILD
[  212s] + cd ed-1.4
[  212s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/ed-1.4-1.1.arm/usr/share/doc/ed-1.4
[  212s] + export DOCDIR
[  212s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/ed-1.4-1.1.arm/usr/share/doc/ed-1.4
[  212s] + cp -pr ChangeLog NEWS README TODO AUTHORS COPYING /home/abuild/rpmbuild/BUILDROOT/ed-1.4-1.1.arm/usr/share/doc/ed-1.4
[  212s] + exit 0
[  212s] Requires(interp): /bin/sh /bin/sh
[  212s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
[  212s] Requires(post): /bin/sh /sbin/install-info
[  212s] Requires(preun): /bin/sh /sbin/install-info
[  212s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.11) libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5)
[  212s] Processing files: ed-debuginfo-1.4-1.1.armv7l
[  212s] Processing files: ed-debugsource-1.4-1.1.armv7l
[  212s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/ed-1.4-1.1.arm
[  212s] Wrote: /home/abuild/rpmbuild/SRPMS/ed-1.4-1.1.src.rpm
[  212s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/ed-1.4-1.1.armv7l.rpm
[  212s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/ed-debuginfo-1.4-1.1.armv7l.rpm
[  212s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/ed-debugsource-1.4-1.1.armv7l.rpm
[  212s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.zwDNsl
[  212s] + umask 022
[  212s] + cd /home/abuild/rpmbuild/BUILD
[  212s] + cd ed-1.4
[  212s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/ed-1.4-1.1.arm
[  212s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/ed-1.4-1.1.arm
[  212s] + exit 0
[  212s] ... checking for files with abuild user/group
[  213s] ... creating baselibs
[  213s] ... saving built statistics
[  213s] ... saving built packages
[  213s] /home/abuild/rpmbuild/RPMS/armv7l/ed-1.4-1.1.armv7l.rpm
[  213s] /home/abuild/rpmbuild/RPMS/armv7l/ed-debuginfo-1.4-1.1.armv7l.rpm
[  213s] /home/abuild/rpmbuild/RPMS/armv7l/ed-debugsource-1.4-1.1.armv7l.rpm
[  213s] /home/abuild/rpmbuild/SRPMS/ed-1.4-1.1.src.rpm
[  213s] /home/abuild/rpmbuild/OTHER/_statistics
[  213s] 
[  213s] w12 finished "build ed.spec" at Thu Oct 29 04:48:06 UTC 2015.
[  213s] 
[  218s] /.build/build: line 368:   241 Killed                  background_monitor_process
[  220s] [  200.307507] SysRq : Power Off
[  220s] [  200.620319] Power down.
[  220s] build: extracting built packages...
[  220s] ed-1.4-1.1.armv7l.rpm
[  220s] ed-debuginfo-1.4-1.1.armv7l.rpm
[  220s] ed-debugsource-1.4-1.1.armv7l.rpm
[  220s] ed-1.4-1.1.src.rpm
[  220s] _statistics