[ 0s] Using BUILD_ROOT=/srv/build/root_5/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_5/root [ 0s] [ 0s] [ 0s] w04 started "build _service:gbs:libslp-utilx.spec" at Thu Oct 29 05:12:17 UTC 2015. [ 0s] [ 0s] Building libslp-utilx for project 'Tizen:2.4:Mobile' repository 'target-TM1' arch 'armv7l' srcmd5 'a808831641417f7624d645b8268254bb' [ 0s] [ 0s] processing specfile /srv/build/root_5/.build-srcdir/_service:gbs:libslp-utilx.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_5/.build-srcdir/_service:gbs:libslp-utilx.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/5/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_5/.build.rpmlist /srv/build/root_5/.build-srcdir/_service:gbs:libslp-utilx.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 0s] [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: glibc -> glibc-common -> bash [ 1s] breaking dependency glibc-common -> bash [ 1s] cycle: glibc -> glibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: glibc -> glibc-common -> coreutils [ 1s] breaking dependency coreutils -> glibc [ 1s] cycle: glibc -> glibc-common -> coreutils -> libacl [ 1s] breaking dependency libacl -> glibc [ 1s] cycle: glibc -> glibc-common -> coreutils -> libacl -> libattr [ 1s] breaking dependency libattr -> glibc [ 1s] cycle: libgcc -> glibc -> glibc-common -> coreutils -> libacl -> libattr [ 1s] breaking dependency libacl -> libattr [ 1s] cycle: libgcc -> glibc -> glibc-common -> coreutils -> libacl [ 1s] breaking dependency glibc-common -> coreutils [ 1s] cycle: glibc -> glibc-common [ 1s] breaking dependency glibc -> glibc-common [ 1s] cycle: libgcc -> glibc [ 1s] breaking dependency libgcc -> glibc [ 1s] cycle: rpm-libs -> rpm [ 1s] breaking dependency rpm-libs -> rpm [ 1s] [1/52] preinstalling tizen-release... [ 1s] [2/52] preinstalling libgcc... [ 1s] [3/52] preinstalling setup... [ 1s] [4/52] preinstalling filesystem... [ 1s] [5/52] preinstalling glibc... [ 1s] [6/52] preinstalling libattr... [ 1s] [7/52] preinstalling libacl... [ 1s] [8/52] preinstalling bash... [ 1s] [9/52] preinstalling bzip2-libs... [ 1s] [10/52] preinstalling diffutils... [ 1s] [11/52] preinstalling elfutils-libelf... [ 1s] [12/52] preinstalling libcap... [ 1s] [13/52] preinstalling liblua... [ 1s] [14/52] preinstalling libstdc++... [ 1s] [15/52] preinstalling ncurses-libs... [ 1s] [16/52] preinstalling nspr... [ 1s] [17/52] preinstalling nss-softokn-freebl... [ 1s] [18/52] preinstalling popt... [ 1s] [19/52] preinstalling readline... [ 1s] [20/52] preinstalling sed... [ 1s] [21/52] preinstalling sqlite... [ 1s] [22/52] preinstalling xz-libs... [ 1s] [23/52] preinstalling zlib... [ 1s] [24/52] preinstalling glibc-common... [ 1s] [25/52] preinstalling tar... [ 1s] [26/52] preinstalling coreutils... [ 1s] [27/52] preinstalling qemu-linux-user-x86-arm... [ 1s] [28/52] preinstalling tizen-accelerator... [ 1s] [29/52] preinstalling libfile... [ 1s] [30/52] preinstalling bzip2... [ 1s] [31/52] preinstalling nss... [ 1s] [32/52] preinstalling bzip2-libs-x86-arm... [ 1s] [33/52] preinstalling elfutils-libelf-x86-arm... [ 1s] [34/52] preinstalling glibc-x86-arm... [ 1s] [35/52] preinstalling libacl-x86-arm... [ 1s] [36/52] preinstalling libattr-x86-arm... [ 1s] [37/52] preinstalling libcap-x86-arm... [ 1s] [38/52] preinstalling libgcc-x86-arm... [ 2s] [39/52] preinstalling liblua-x86-arm... [ 2s] [40/52] preinstalling ncurses-libs-x86-arm... [ 2s] [41/52] preinstalling nspr-x86-arm... [ 2s] [42/52] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [43/52] preinstalling nss-x86-arm... [ 2s] [44/52] preinstalling popt-x86-arm... [ 2s] [45/52] preinstalling sqlite-x86-arm... [ 2s] [46/52] preinstalling xz-libs-x86-arm... [ 2s] [47/52] preinstalling zlib-x86-arm... [ 2s] [48/52] preinstalling rpm-libs... [ 2s] [49/52] preinstalling bash-x86-arm... [ 2s] [50/52] preinstalling rpm-libs-x86-arm... [ 2s] [51/52] preinstalling rpm... [ 2s] [52/52] preinstalling rpm-x86-arm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 2s] copying packages... [ 3s] reordering...cycle: bash -> glibc -> glibc-common [ 3s] breaking dependency glibc-common -> bash [ 3s] cycle: bash -> glibc -> glibc-common -> coreutils [ 3s] breaking dependency glibc-common -> coreutils [ 3s] cycle: glibc -> glibc-common -> findutils [ 3s] breaking dependency glibc-common -> findutils [ 3s] cycle: glibc -> glibc-common [ 3s] breaking dependency glibc-common -> glibc [ 3s] cycle: glibc -> glibc-common -> grep [ 3s] breaking dependency grep -> glibc [ 3s] cycle: glibc -> glibc-common -> grep -> libgcc [ 3s] breaking dependency grep -> libgcc [ 3s] cycle: glibc -> glibc-common -> grep -> libpcre [ 3s] breaking dependency libpcre -> glibc [ 3s] cycle: glibc -> glibc-common -> grep -> libpcre -> libgcc [ 3s] breaking dependency libpcre -> libgcc [ 3s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++ [ 3s] breaking dependency libstdc++ -> glibc [ 3s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 3s] breaking dependency glibc -> glibc-common [ 3s] cycle: glibc -> libgcc [ 3s] breaking dependency libgcc -> glibc [ 3s] cycle: filesystem -> setup [ 3s] breaking dependency setup -> filesystem [ 3s] cycle: ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses [ 3s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses-base [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl -> perl-libs [ 3s] cycle: perl -> perl-IO-Compress-Zlib [ 3s] breaking dependency perl -> perl-IO-Compress-Zlib [ 3s] cycle: perl -> perl-IO-Compress-Base [ 3s] breaking dependency perl -> perl-IO-Compress-Base [ 3s] cycle: perl -> perl-Module-Pluggable [ 3s] breaking dependency perl -> perl-Module-Pluggable [ 3s] cycle: perl -> perl-Pod-Simple [ 3s] breaking dependency perl -> perl-Pod-Simple [ 3s] cycle: nss -> nss-sysinit [ 3s] breaking dependency nss -> nss-sysinit [ 3s] cycle: rpm-libs -> rpm [ 3s] breaking dependency rpm-libs -> rpm [ 3s] done [ 4s] booting kvm ... [ 4s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 16000 -drive file=/srv/build/root_5/root,if=virtio,cache=none -drive file=/srv/build/root_5/root,if=ide,index=0,cache=none -drive file=/srv/build/root_5/swap,if=virtio,cache=none -smp 8 [ 9s] doing fast boot [ 9s] Creating device nodes with udev [ 9s] Waiting for device /dev/vda to appear: ok [ 9s] fsck from util-linux 2.21.2 [ 9s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 9s] /dev/vda: clean, 4769/4194304 files, 337429/16777216 blocks [ 9s] fsck succeeded. Mounting root device read-write. [ 9s] Mounting root /dev/vda [ 9s] mount -o rw -t ext4 /dev/vda /root [ 9s] replacing /etc/mtab with symlink to /proc/self/mounts [ 9s] /.build/qemu-reg: line 9: interpreter '/usr/bin/qemu-armeb-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 10: interpreter '/usr/bin/qemu-ppc-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 11: interpreter '/usr/bin/qemu-mips-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 12: interpreter '/usr/bin/qemu-mipsel-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 18: interpreter '/usr/bin/qemu-sh4-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 19: interpreter '/usr/bin/qemu-sh4eb-binfmt' not found, ignoring [ 10s] 2nd stage started in virtual machine [ 10s] machine type: armv7l [ 10s] swapon on /dev/vdb [ 10s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 10s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 10s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 10s] logging output to //.build.log... [ 10s] processing specfile /.build-srcdir/_service:gbs:libslp-utilx.spec ... [ 10s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:libslp-utilx.spec build rpmlint-Factory ... [ 11s] running rpm-x86-arm postinstall script [ 11s] running rpm-libs-x86-arm postinstall script [ 11s] running tizen-accelerator postinstall script [ 12s] running glibc-x86-arm postinstall script [ 12s] running bash-x86-arm postinstall script [ 12s] initializing rpm db... [ 17s] [1/215] cumulate cross-armv7l-platformfile-0.0.1-1.1 [ 17s] [2/215] cumulate kernel-headers-3.4.91-1.1 [ 17s] [3/215] cumulate libX11-common-1.6.2-1.1 [ 17s] [4/215] cumulate tizen-release-2.2.0-1.1 [ 17s] [5/215] cumulate tzdata-2014j-1.1 [ 17s] [6/215] cumulate libgcc-4.9.2-2015.02.1.11 [ 17s] [7/215] cumulate setup-0.2-1.1 [ 17s] [8/215] cumulate filesystem-0.1-1.1 [ 17s] [9/215] cumulate glibc-2.20-2014.11.1.10 [ 17s] [10/215] cumulate libstdc++-4.9.2-2015.02.1.11 [ 17s] [11/215] cumulate libatomic-4.9.2-2015.02.1.11 [ 17s] [12/215] cumulate libgomp-4.9.2-2015.02.1.11 [ 17s] [13/215] cumulate openssl-1.0.1p-1.5 [ 17s] [14/215] cumulate smack-1.0+s14-1.8 [ 17s] [15/215] cumulate bash-4.1-1.6 [ 17s] [16/215] cumulate bzip2-libs-1.0.5-1.8 [ 17s] [17/215] cumulate capi-base-common-0.2.2-1.1 [ 17s] [18/215] cumulate cpio-2.8-1.6 [ 17s] [19/215] cumulate db4-4.8.30-1.8 [ 17s] [20/215] cumulate diffutils-3.0-1.6 [ 17s] [21/215] cumulate e2fsprogs-libs-1.41.9-1.4 [ 17s] [22/215] cumulate elfutils-libelf-0.152-1.12 [ 17s] [23/215] cumulate expat-2.0.1-1.8 [ 17s] [24/215] cumulate fdupes-1.40-1.5 [ 17s] [25/215] cumulate findutils-4.2.31-1.5 [ 17s] [26/215] cumulate gdbm-1.8.3-1.12 [ 17s] [27/215] cumulate libXau-1.0.8-1.1 [ 18s] [28/215] cumulate libattr-2.4.44-1.8 [ 18s] [29/215] cumulate libdrm2-2.4.35-1.1 [ 18s] [30/215] cumulate libitm-4.9.2-2015.02.1.11 [ 18s] [31/215] cumulate libkms1-2.4.35-1.1 [ 18s] [32/215] cumulate liblua-5.1.4-1.6 [ 18s] [33/215] cumulate libuuid-2.20.2-1.4 [ 18s] [34/215] cumulate m4-1.4.14-1.5 [ 18s] [35/215] cumulate net-tools-1.60-2.6 [ 18s] [36/215] cumulate nspr-4.9-1.9 [ 18s] [37/215] cumulate nss-softokn-freebl-3.12.9-1.17 [ 18s] [38/215] cumulate patch-2.6-1.6 [ 18s] [39/215] cumulate pkg-config-0.25-2.6 [ 18s] [40/215] cumulate popt-1.16-1.8 [ 18s] [41/215] cumulate readline-5.2-1.6 [ 18s] [42/215] cumulate ruby-1.9.2-1.6 [ 18s] [43/215] cumulate sed-4.1.5-1.5 [ 18s] [44/215] cumulate sqlite-3.8.10.2-1.8 [ 18s] [45/215] cumulate xz-libs-5.0.3-1.8 [ 18s] [46/215] cumulate zlib-1.2.8-1.8 [ 18s] [47/215] cumulate libasan-4.9.2-2015.02.1.11 [ 18s] [48/215] cumulate libpcre-7.7-1.25 [ 18s] [49/215] cumulate libubsan-4.9.2-2015.02.1.11 [ 18s] [50/215] cumulate patchelf-0.5.svn20809-1.5 [ 18s] [51/215] cumulate ncurses-libs-5.7-1.8 [ 18s] [52/215] cumulate build-compare-2009.10.14-1.6 [ 18s] [53/215] cumulate libpthread-stubs-0.3-1.1 [ 18s] [54/215] cumulate qemu-linux-user-x86-arm-2.2.0-4.1.1 [ 18s] [55/215] cumulate xorg-x11-proto-core-7.0.31-1.1 [ 18s] [56/215] cumulate xorg-x11-proto-damage-1.2.1-1.1 [ 18s] [57/215] cumulate xorg-x11-proto-dri2-2.8-1.1 [ 18s] [58/215] cumulate xorg-x11-proto-kb-1.0.6-1.1 [ 18s] [59/215] cumulate xorg-x11-proto-randr-1.4-1.1 [ 18s] [60/215] cumulate xorg-x11-proto-renderproto-0.11.1-1.1 [ 18s] [61/215] cumulate xorg-x11-proto-video-2.3.2-1.1 [ 18s] [62/215] cumulate xorg-x11-proto-xext-7.3.1-1.1 [ 18s] [63/215] cumulate xorg-x11-xutils-dev-7.7-1.1 [ 18s] [64/215] cumulate capi-base-common-devel-0.2.2-1.1 [ 18s] [65/215] cumulate cpp-4.9.2-2015.02.1.11 [ 18s] [66/215] cumulate glibc-headers-2.20-2014.11.1.10 [ 18s] [67/215] cumulate libcap-2.21-1.6 [ 18s] [68/215] cumulate unzip-6.0-1.12 [ 18s] [69/215] cumulate zlib-devel-1.2.8-1.8 [ 18s] [70/215] cumulate grep-2.5.1a-1.5 [ 18s] [71/215] cumulate libacl-2.2.49-1.5 [ 18s] [72/215] cumulate libdrm-devel-2.4.35-1.1 [ 18s] [73/215] cumulate libfile-5.04-1.7 [ 18s] [74/215] cumulate libpython-2.7.1-1.5 [ 18s] [75/215] cumulate libxcb-1.10.0-1.1 [ 18s] [76/215] cumulate libxml2-2.9.2-1.3 [ 18s] [77/215] cumulate make-3.82-154.1.6 [ 18s] [78/215] cumulate ncurses-5.7-1.8 [ 19s] [79/215] cumulate pcre-7.7-1.25 [ 19s] [80/215] cumulate psmisc-22.20-1.6 [ 19s] [81/215] cumulate smack-utils-1.0+s14-1.8 [ 19s] [82/215] cumulate binutils-2.25.0-2015.01.1.8 [ 19s] [83/215] cumulate bzip2-1.0.5-1.8 [ 19s] [84/215] cumulate libblkid-2.20.2-1.4 [ 19s] [85/215] cumulate xz-5.0.3-1.8 [ 19s] [86/215] cumulate elfutils-libs-0.152-1.12 [ 19s] [87/215] cumulate ttrace-1.0.0-1.1 [ 19s] [88/215] cumulate nss-3.12.9-1.17 [ 19s] [89/215] cumulate perl-5.12.1-1.25 [ 19s] [90/215] cumulate ncurses-base-5.7-1.8 [ 19s] [91/215] cumulate perl-HTML-Tagset-3.20-1.1 [ 19s] [92/215] cumulate perl-IO-Compress-Base-2.008-1.25 [ 19s] [93/215] cumulate perl-Module-Pluggable-3.60-1.25 [ 19s] [94/215] cumulate perl-Pod-Escapes-1.04-1.25 [ 19s] [95/215] cumulate perl-TimeDate-1.20-1.1 [ 19s] [96/215] cumulate perl-URI-1.54-1.1 [ 19s] [97/215] cumulate glibc-devel-2.20-2014.11.1.10 [ 19s] [98/215] cumulate xorg-x11-proto-fixes-5.0-1.1 [ 19s] [99/215] cumulate file-5.04-1.7 [ 19s] [100/215] cumulate libXau-devel-1.0.8-1.1 [ 19s] [101/215] cumulate libxslt-1.1.28-1.2 [ 19s] [102/215] cumulate perl-Compress-Raw-Zlib-2.008-1.25 [ 19s] [103/215] cumulate perl-libs-5.12.1-1.25 [ 19s] [104/215] cumulate tar-1.17-1.6 [ 19s] [105/215] cumulate coreutils-6.9-1.6 [ 19s] [106/215] cumulate libX11-1.6.2-1.1 [ 19s] [107/215] cumulate libdlog-0.4.1-1.1 [ 19s] [108/215] cumulate libmount-2.20.2-1.4 [ 19s] [109/215] cumulate xz-lzma-compat-5.0.3-1.8 [ 19s] [110/215] cumulate elfutils-0.152-1.12 [ 19s] [111/215] cumulate nss-sysinit-3.12.9-1.17 [ 19s] [112/215] cumulate python-base-2.7.1-1.5 [ 19s] [113/215] cumulate glibc-common-2.20-2014.11.1.10 [ 19s] [114/215] cumulate libarchive-2.8.3-1.2 [ 19s] [115/215] cumulate rpm-libs-4.9.1-4.3.1.10 [ 19s] [116/215] cumulate libstdc++-devel-4.9.2-2015.02.1.11 [ 19s] [117/215] cumulate perl-Pod-Simple-3.07-1.25 [ 19s] [118/215] cumulate tizen-accelerator-1.0.1-1.1 [ 19s] [119/215] cumulate libXdamage-1.1.4-1.1 [ 19s] [120/215] cumulate libXext-1.3.2-1.1 [ 19s] [121/215] cumulate libXfixes-5.0.1-1.1 [ 19s] [122/215] cumulate libXrender-0.9.8-1.1 [ 20s] [123/215] cumulate libdlog-devel-0.4.1-1.1 [ 20s] [124/215] cumulate perl-IO-Compress-Zlib-2.008-1.25 [ 20s] [125/215] cumulate gawk-3.1.5-1.6 [ 20s] [126/215] cumulate gzip-1.3.12-1.6 [ 20s] [127/215] cumulate libxcb-devel-1.10.0-1.1 [ 20s] [128/215] cumulate perl-HTML-Parser-3.65-1.5 [ 20s] [129/215] cumulate python-xml-2.7.1-1.5 [ 20s] [130/215] cumulate autoconf-2.68-1.1 [ 20s] [131/215] cumulate build-2011.01.10a-1.1 [ 20s] [132/215] installing rpm-4.9.1-4.3.1.10 [ 20s] [133/215] cumulate python-lxml-2.2.3-1.2 [ 20s] [134/215] cumulate util-linux-2.20.2-1.4 [ 20s] [135/215] cumulate cmake-2.8.5-1.1.2 [ 20s] [136/215] cumulate python-2.7.1-1.3 [ 20s] [137/215] cumulate gcc-4.9.2-2015.02.1.11 [ 20s] [138/215] cumulate automake-1.11.1-1.1 [ 20s] [139/215] cumulate bzip2-libs-x86-arm-1.0.5-9.1.4 [ 20s] [140/215] cumulate elfutils-libelf-x86-arm-0.152-9.1.4 [ 20s] [141/215] cumulate elfutils-libs-x86-arm-0.152-9.1.4 [ 20s] [142/215] cumulate expat-x86-arm-2.0.1-1.4 [ 21s] [143/215] cumulate glibc-x86-arm-2.20-9.1.5 [ 21s] [144/215] cumulate libacl-x86-arm-2.2.49-9.1.4 [ 21s] [145/215] cumulate libarchive-x86-arm-2.8.3-1.3 [ 21s] [146/215] cumulate libattr-x86-arm-2.4.44-9.1.4 [ 21s] [147/215] cumulate libcap-x86-arm-2.21-9.1.4 [ 21s] [148/215] cumulate libfile-x86-arm-5.04-9.1.4 [ 21s] [149/215] cumulate libgcc-x86-arm-4.9.2-9.1.4 [ 21s] [150/215] cumulate liblua-x86-arm-5.1.4-9.1.3 [ 21s] [151/215] cumulate libpython-x86-arm-2.7.1-9.1.3 [ 21s] [152/215] cumulate libstdc++-x86-arm-4.9.2-9.1.4 [ 21s] [153/215] cumulate libxml2-x86-arm-2.9.2-9.1.3 [ 21s] [154/215] cumulate libxslt-x86-arm-1.1.28-9.1.3 [ 21s] [155/215] cumulate ncurses-libs-x86-arm-5.7-9.1.3 [ 21s] [156/215] cumulate nspr-x86-arm-4.9-9.1.5 [ 21s] [157/215] cumulate nss-softokn-freebl-x86-arm-3.12.9-9.1.5 [ 21s] [158/215] cumulate nss-x86-arm-3.12.9-9.1.5 [ 21s] [159/215] cumulate openssl-x86-arm-1.0.1p-9.1.3 [ 21s] [160/215] cumulate perl-libs-x86-arm-5.12.1-9.1.5 [ 21s] [161/215] cumulate popt-x86-arm-1.16-9.1.4 [ 21s] [162/215] cumulate python-lxml-x86-arm-2.2.3-9.1.3 [ 21s] [163/215] cumulate python-x86-arm-2.7.1-9.1.3 [ 21s] [164/215] cumulate python-xml-x86-arm-2.7.1-9.1.3 [ 21s] [165/215] cumulate rpm-libs-x86-arm-4.9.1-9.1.4 [ 21s] [166/215] cumulate sqlite-x86-arm-3.8.10.2-9.1.3 [ 21s] [167/215] cumulate xz-libs-x86-arm-5.0.3-9.1.4 [ 21s] [168/215] cumulate zlib-x86-arm-1.2.8-9.1.4 [ 21s] [169/215] cumulate gcc-c++-4.9.2-2015.02.1.11 [ 21s] [170/215] cumulate libXv-1.0.10-1.1 [ 21s] [171/215] cumulate libdri2-0.2.1-1.1 [ 21s] [172/215] cumulate perl-Compress-Zlib-2.008-1.25 [ 21s] [173/215] cumulate ttrace-devel-1.0.0-1.1 [ 21s] [174/215] cumulate libX11-devel-1.6.2-1.1 [ 21s] [175/215] cumulate libXrandr-1.4.2-1.1 [ 21s] [176/215] cumulate rpm-build-4.9.1-4.3.1.10 [ 21s] [177/215] cumulate bash-x86-arm-4.1-9.1.4 [ 21s] [178/215] cumulate diffutils-x86-arm-3.0-9.1.4 [ 21s] [179/215] cumulate fdupes-x86-arm-1.40-9.1.4 [ 21s] [180/215] cumulate findutils-x86-arm-4.2.31-9.1.4 [ 22s] [181/215] cumulate gawk-x86-arm-3.1.5-9.1.3 [ 22s] [182/215] cumulate gzip-x86-arm-1.3.12-9.1.4 [ 22s] [183/215] cumulate libtool-2.2.6b-1.8 [ 22s] [184/215] cumulate m4-x86-arm-1.4.14-9.1.4 [ 22s] [185/215] cumulate make-x86-arm-3.82-9.1.3 [ 22s] [186/215] cumulate patch-x86-arm-2.6-9.1.4 [ 22s] [187/215] cumulate perl-libwww-perl-5.836-1.1 [ 22s] [188/215] cumulate pkg-config-x86-arm-0.25-9.1.4 [ 22s] [189/215] cumulate ruby-x86-arm-1.9.2-9.1.4 [ 22s] [190/215] cumulate sed-x86-arm-4.1.5-9.1.4 [ 22s] [191/215] cumulate bzip2-x86-arm-1.0.5-1.4 [ 22s] [192/215] cumulate libXext-devel-1.3.2-1.1 [ 22s] [193/215] cumulate libXfixes-devel-5.0.1-1.1 [ 22s] [194/215] cumulate libXrender-devel-0.9.8-1.1 [ 22s] [195/215] cumulate perl-x86-arm-5.12.1-9.1.5 [ 22s] [196/215] cumulate python-base-x86-arm-2.7.1-9.1.3 [ 22s] [197/215] cumulate coreutils-x86-arm-6.9-9.1.4 [ 22s] [198/215] cumulate cross-armv7l-gcc-accel-x86-armv7l-4.9.2-2015.02.1.6 [ 22s] [199/215] cumulate file-x86-arm-5.04-9.1.4 [ 22s] [200/215] cumulate libtbm-1.1.8-1.1 [ 22s] [201/215] cumulate tar-x86-arm-1.17-9.1.4 [ 22s] [202/215] cumulate elfutils-x86-arm-0.152-9.1.4 [ 22s] [203/215] cumulate cmake-x86-arm-2.8.5-1.3 [ 22s] [204/215] cumulate rpm-x86-arm-4.9.1-9.1.4 [ 22s] [205/215] cumulate rpm-build-x86-arm-4.9.1-9.1.4 [ 22s] [206/215] cumulate libtbm-devel-1.1.8-1.1 [ 22s] [207/215] cumulate libdri2-devel-0.2.1-1.1 [ 22s] [208/215] cumulate perl-HTML-Parser-x86-arm-3.65-9.1.3 [ 22s] [209/215] cumulate cross-armv7l-binutils-accel-x86-armv7l-2.25.0-2015.01.1.3 [ 22s] [210/215] cumulate libXdamage-devel-1.1.4-1.1 [ 22s] [211/215] cumulate libXv-devel-1.0.10-1.1 [ 22s] [212/215] cumulate perl-XML-Parser-2.36-1.6 [ 22s] [213/215] cumulate libXrandr-devel-1.4.2-1.1 [ 22s] [214/215] cumulate perl-XML-Parser-x86-arm-2.36-9.1.3 [ 22s] [215/215] now installing cumulated packages [ 23s] Preparing... ################################################## [ 23s] setup ################################################## [ 23s] filesystem ################################################## [ 23s] tzdata ################################################## [ 23s] libX11-common ################################################## [ 23s] tizen-release ################################################## [ 23s] kernel-headers ################################################## [ 23s] cross-armv7l-platformfile ################################################## [ 23s] bash ################################################## [ 23s] findutils ################################################## [ 23s] grep ################################################## [ 23s] coreutils ################################################## [ 23s] glibc-common ################################################## [ 23s] libgcc ################################################## [ 23s] /sbin/ldconfig: relative path `1' used to build cache [ 23s] warning: %post(libgcc-4.9.2-2015.02.1.11.armv7l) scriptlet failed, exit status 1 [ 23s] glibc ################################################## [ 23s] libstdc++ ################################################## [ 23s] libattr ################################################## [ 24s] libacl ################################################## [ 24s] libpcre ################################################## [ 24s] tizen-accelerator ################################################## [ 24s] glibc-x86-arm ################################################## [ 24s] libattr-x86-arm ################################################## [ 24s] libacl-x86-arm ################################################## [ 24s] libgcc-x86-arm ################################################## [ 24s] libstdc++-x86-arm ################################################## [ 25s] glibc-headers ################################################## [ 25s] glibc-devel ################################################## [ 25s] libstdc++-devel ################################################## [ 25s] coreutils-x86-arm ################################################## [ 27s] bash-x86-arm ################################################## [ 28s] findutils-x86-arm ################################################## [ 28s] build-compare ################################################## [ 28s] qemu-linux-user-x86-arm ################################################## [ 28s] pkg-config ################################################## [ 28s] zlib ################################################## [ 28s] xorg-x11-proto-core ################################################## [ 28s] zlib-x86-arm ################################################## [ 28s] bzip2-libs ################################################## [ 28s] bzip2-libs-x86-arm ################################################## [ 28s] elfutils-libelf ################################################## [ 28s] xz-libs ################################################## [ 28s] ncurses-libs ################################################## [ 28s] ncurses ################################################## [ 28s] ncurses-base ################################################## [ 28s] libpython ################################################## [ 29s] python-base ################################################## [ 29s] libxml2 ################################################## [ 29s] binutils ################################################## [ 29s] xz-libs-x86-arm ################################################## [ 29s] elfutils-libelf-x86-arm ################################################## [ 29s] libfile ################################################## [ 29s] openssl ################################################## [ 29s] capi-base-common ################################################## [ 29s] expat ################################################## [ 29s] libuuid ################################################## [ 29s] nspr ################################################## [ 29s] popt ################################################## [ 29s] sed ################################################## [ 29s] sqlite ################################################## [ 29s] popt-x86-arm ################################################## [ 29s] nspr-x86-arm ################################################## [ 29s] capi-base-common-devel ################################################## [ 29s] libfile-x86-arm ################################################## [ 29s] xorg-x11-proto-xext ################################################## [ 29s] libblkid ################################################## [ 29s] libarchive ################################################## [ 29s] file ################################################## [ 29s] libxslt ################################################## [ 29s] xz ################################################## [ 29s] elfutils-libs ################################################## [ 29s] elfutils ################################################## [ 29s] bzip2 ################################################## [ 29s] tar ################################################## [ 29s] libcap ################################################## [ 29s] libcap-x86-arm ################################################## [ 29s] diffutils ################################################## [ 29s] libXau ################################################## [ 30s] libxcb ################################################## [ 30s] libX11 ################################################## [ 30s] libXext ################################################## [ 30s] libdri2 ################################################## [ 30s] libXrender ################################################## [ 30s] libdrm2 ################################################## [ 30s] liblua ################################################## [ 30s] liblua-x86-arm ################################################## [ 30s] m4 ################################################## [ 30s] nss-softokn-freebl ################################################## [ 30s] nss ################################################## [ 30s] nss-sysinit ################################################## [ 30s] nss-x86-arm ################################################## [ 30s] rpm-libs ################################################## [ 30s] rpm-libs-x86-arm ################################################## [ 30s] patch ################################################## [ 30s] gawk ################################################## [ 30s] gzip ################################################## [ 30s] libXau-devel ################################################## [ 30s] elfutils-libs-x86-arm ################################################## [ 30s] libarchive-x86-arm ################################################## [ 30s] xorg-x11-proto-fixes ################################################## [ 30s] openssl-x86-arm ################################################## [ 30s] libxml2-x86-arm ################################################## [ 30s] libpython-x86-arm ################################################## [ 30s] zlib-devel ################################################## [ 30s] libpthread-stubs ################################################## [ 30s] libxcb-devel ################################################## [ 30s] xorg-x11-proto-damage ################################################## [ 30s] xorg-x11-proto-dri2 ################################################## [ 30s] xorg-x11-proto-kb ################################################## [ 30s] libX11-devel ################################################## [ 30s] xorg-x11-proto-randr ################################################## [ 30s] xorg-x11-proto-renderproto ################################################## [ 30s] libXrender-devel ################################################## [ 30s] xorg-x11-proto-video ################################################## [ 30s] xorg-x11-xutils-dev ################################################## [ 30s] libXext-devel ################################################## [ 30s] libtbm ################################################## [ 30s] libXrandr ################################################## [ 30s] libXv ################################################## [ 30s] libXdamage ################################################## [ 30s] libXfixes ################################################## [ 30s] libXfixes-devel ################################################## [ 30s] xz-lzma-compat ################################################## [ 31s] python-lxml ################################################## [ 31s] cmake ################################################## [ 31s] libmount ################################################## [ 31s] ttrace ################################################## [ 31s] python-xml ################################################## [ 31s] cpp ################################################## [ 31s] libasan ################################################## [ 31s] libubsan ################################################## [ 31s] libatomic ################################################## [ 31s] libgomp ################################################## [ 31s] smack ################################################## [ 31s] smack-utils ################################################## [ 31s] libdlog ################################################## [ 31s] libdlog-devel ################################################## [ 31s] cpio ################################################## [ 31s] db4 ################################################## [ 31s] fdupes ################################################## [ 31s] gdbm ################################################## [ 31s] perl-Pod-Escapes ################################################## [ 31s] perl-Compress-Raw-Zlib ################################################## [ 31s] perl-IO-Compress-Base ################################################## [ 31s] perl-Module-Pluggable ################################################## [ 31s] perl-Pod-Simple ################################################## [ 31s] perl-IO-Compress-Zlib ################################################## [ 31s] perl-libs ################################################## [ 32s] perl ################################################## [ 32s] perl-URI ################################################## [ 32s] autoconf ################################################## [ 32s] automake ################################################## [ 32s] perl-HTML-Tagset ################################################## [ 32s] perl-TimeDate ################################################## [ 32s] perl-Compress-Zlib ################################################## [ 32s] perl-libs-x86-arm ################################################## [ 33s] perl-x86-arm ################################################## [ 34s] perl-HTML-Parser ################################################## [ 34s] perl-libwww-perl ################################################## [ 34s] perl-XML-Parser ################################################## [ 34s] libitm ################################################## [ 34s] gcc ################################################## [ 34s] gcc-c++ ################################################## [ 35s] cross-armv7l-gcc-accel-x86-a################################################## [ 35s] "GCCVER: 4.9 GCCVER_NEW: 4.9 " [ 35s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 36s] libkms1 ################################################## [ 36s] readline ################################################## [ 36s] python ################################################## [ 36s] ruby ################################################## [ 36s] unzip ################################################## [ 36s] rpm-build ################################################## [ 36s] make ################################################## [ 36s] make-x86-arm ################################################## [ 36s] rpm-build-x86-arm ################################################## [ 36s] ruby-x86-arm ################################################## [ 36s] python-x86-arm ################################################## [ 37s] libdrm-devel ################################################## [ 37s] cross-armv7l-binutils-accel-################################################## [ 37s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/addr2line': File exists [ 37s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ar': File exists [ 37s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/as': File exists [ 37s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/c++filt': File exists [ 37s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/elfedit': File exists [ 37s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/gprof': File exists [ 37s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld': File exists [ 37s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld.bfd': File exists [ 37s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld.gold': File exists [ 37s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/nm': File exists [ 37s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/objcopy': File exists [ 37s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/objdump': File exists [ 37s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ranlib': File exists [ 37s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/readelf': File exists [ 37s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/size': File exists [ 37s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/strings': File exists [ 37s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/strip': File exists [ 37s] perl-XML-Parser-x86-arm ################################################## [ 37s] perl-HTML-Parser-x86-arm ################################################## [ 38s] build ################################################## [ 38s] libtool ################################################## [ 38s] fdupes-x86-arm ################################################## [ 38s] ttrace-devel ################################################## [ 38s] python-xml-x86-arm ################################################## [ 38s] cmake-x86-arm ################################################## [ 38s] python-lxml-x86-arm ################################################## [ 38s] libdri2-devel ################################################## [ 38s] libXdamage-devel ################################################## [ 38s] libXv-devel ################################################## [ 38s] libXrandr-devel ################################################## [ 38s] libtbm-devel ################################################## [ 38s] python-base-x86-arm ################################################## [ 39s] elfutils-x86-arm ################################################## [ 39s] gzip-x86-arm ################################################## [ 39s] gawk-x86-arm ################################################## [ 39s] patch-x86-arm ################################################## [ 39s] rpm-x86-arm ################################################## [ 39s] /bin/rpm.orig-arm already present - skipping. [ 39s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 39s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 39s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 39s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 39s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 39s] nss-softokn-freebl-x86-arm ################################################## [ 39s] m4-x86-arm ################################################## [ 39s] diffutils-x86-arm ################################################## [ 40s] tar-x86-arm ################################################## [ 40s] bzip2-x86-arm ################################################## [ 40s] libxslt-x86-arm ################################################## [ 40s] mv: cannot stat `/usr/bin/xsltproc': No such file or directory [ 40s] file-x86-arm ################################################## [ 40s] sqlite-x86-arm ################################################## [ 40s] sed-x86-arm ################################################## [ 40s] expat-x86-arm ################################################## [ 40s] ncurses-libs-x86-arm ################################################## [ 40s] pkg-config-x86-arm ################################################## [ 40s] util-linux ################################################## [ 40s] psmisc ################################################## [ 40s] pcre ################################################## [ 40s] patchelf ################################################## [ 40s] e2fsprogs-libs ################################################## [ 40s] net-tools ################################################## [ 41s] removing nis flags from //etc/nsswitch.conf... [ 41s] now finalizing build dir... [ 42s] build target is armv7l-tizen-linux [ 42s] ----------------------------------------------------------------- [ 42s] I have the following modifications for libslp-utilx.spec: [ 42s] 6c6 [ 42s] < Release: 1 [ 42s] --- [ 42s] > Release: %{?release_prefix:%{release_prefix}.}1.1 [ 42s] ----------------------------------------------------------------- [ 42s] ----- building libslp-utilx.spec (user abuild) [ 42s] ----------------------------------------------------------------- [ 42s] ----------------------------------------------------------------- [ 42s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:2.4:Mobile/target-TM1/a808831641417f7624d645b8268254bb-libslp-utilx' /home/abuild/rpmbuild/SOURCES/libslp-utilx.spec [ 42s] Building target platforms: armv7l-tizen-linux [ 42s] Building for target armv7l-tizen-linux [ 42s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.hoisSz [ 42s] + umask 022 [ 42s] + cd /home/abuild/rpmbuild/BUILD [ 42s] + cd /home/abuild/rpmbuild/BUILD [ 42s] + rm -rf libslp-utilx-0.5.4 [ 42s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/libslp-utilx-0.5.4.tar.gz [ 42s] + /bin/tar -xf - [ 42s] + STATUS=0 [ 42s] + '[' 0 -ne 0 ']' [ 42s] + cd libslp-utilx-0.5.4 [ 42s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 42s] + exit 0 [ 42s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.Na8nro [ 42s] + umask 022 [ 42s] + cd /home/abuild/rpmbuild/BUILD [ 42s] + cd libslp-utilx-0.5.4 [ 42s] + LANG=C [ 42s] + export LANG [ 42s] + unset DISPLAY [ 42s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 42s] + export CFLAGS [ 42s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 42s] + export CXXFLAGS [ 42s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 42s] + export FFLAGS [ 42s] + LD_AS_NEEDED=1 [ 42s] + export LD_AS_NEEDED [ 42s] + cmake . -DCMAKE_INSTALL_PREFIX=/usr [ 42s] -- The C compiler identification is GNU [ 42s] -- Check for working C compiler: /usr/bin/gcc [ 42s] -- Check for working C compiler: /usr/bin/gcc -- works [ 42s] -- Detecting C compiler ABI info [ 42s] -- Detecting C compiler ABI info - done [ 42s] -- checking for modules 'x11;xext;xv;xdamage;libdrm;libtbm;libdri2;xrandr' [ 42s] -- found x11, version 1.6.2 [ 42s] -- found xext, version 1.3.2 [ 42s] -- found xv, version 1.0.10 [ 42s] -- found xdamage, version 1.1.4 [ 42s] -- found libdrm, version 2.4.35 [ 42s] -- found libtbm, version 1.1.0 [ 42s] -- found libdri2, version 2.1 [ 42s] -- found xrandr, version 1.4.2 [ 42s] -- checking for module 'ttrace' [ 42s] -- found ttrace, version 1.1 [ 42s] -- Configuring done [ 42s] -- Generating done [ 42s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/libslp-utilx-0.5.4 [ 42s] + make -j8 [ 42s] Scanning dependencies of target utilX [ 42s] [100%] Building C object CMakeFiles/utilX.dir/x11.c.o [ 42s] /home/abuild/rpmbuild/BUILD/libslp-utilx-0.5.4/x11.c: In function 'utilx_create_video_screen_shot': [ 42s] /home/abuild/rpmbuild/BUILD/libslp-utilx-0.5.4/x11.c:1561:43: warning: passing argument 4 of 'XIfEvent' from incompatible pointer type [ 42s] XIfEvent(info->dpy, &ev, predicate_proc, info); [ 42s] ^ [ 42s] In file included from /home/abuild/rpmbuild/BUILD/libslp-utilx-0.5.4/x11.c:27:0: [ 42s] /usr/include/X11/Xlib.h:2765:12: note: expected 'XPointer' but argument is of type 'struct ShotInfo *' [ 42s] extern int XIfEvent( [ 42s] ^ [ 43s] Linking C shared library libutilX.so [ 43s] [100%] Built target utilX [ 43s] + exit 0 [ 43s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.0G0QZf [ 43s] + umask 022 [ 43s] + cd /home/abuild/rpmbuild/BUILD [ 43s] + cd libslp-utilx-0.5.4 [ 43s] + LANG=C [ 43s] + export LANG [ 43s] + unset DISPLAY [ 43s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libslp-utilx-0.5.4-1.1.arm [ 43s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libslp-utilx-0.5.4-1.1.arm [ 43s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libslp-utilx-0.5.4-1.1.arm [ 43s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libslp-utilx-0.5.4-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/libslp-utilx-0.5.4-1.1.arm install [ 43s] [100%] Built target utilX [ 43s] Install the project... [ 43s] -- Install configuration: "" [ 43s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libslp-utilx-0.5.4-1.1.arm/usr/lib/libutilX.so.1.1.0 [ 43s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libslp-utilx-0.5.4-1.1.arm/usr/lib/libutilX.so.1 [ 43s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libslp-utilx-0.5.4-1.1.arm/usr/lib/libutilX.so [ 43s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libslp-utilx-0.5.4-1.1.arm/usr/lib/pkgconfig/utilX.pc [ 43s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libslp-utilx-0.5.4-1.1.arm/usr/include/utilX.h [ 43s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libslp-utilx-0.5.4-1.1.arm/usr/include/utilX_ext.h [ 43s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libslp-utilx-0.5.4-1.1.arm/usr/share/info/dir [ 43s] + find /home/abuild/rpmbuild/BUILDROOT/libslp-utilx-0.5.4-1.1.arm -regex '.*\.la$' [ 43s] + xargs rm -f -- [ 43s] + find /home/abuild/rpmbuild/BUILDROOT/libslp-utilx-0.5.4-1.1.arm -regex '.*\.a$' [ 43s] + xargs rm -f -- [ 43s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libslp-utilx-0.5.4-1.1.arm/usr/share/license [ 43s] + cp /home/abuild/rpmbuild/BUILD/libslp-utilx-0.5.4/LICENSE.APLv2 /home/abuild/rpmbuild/BUILDROOT/libslp-utilx-0.5.4-1.1.arm/usr/share/license/libslp-utilx [ 43s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/libslp-utilx-0.5.4 [ 43s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libslp-utilx-0.5.4-1.1.arm/usr/lib/libutilX.so.1.1.0 [ 43s] symlinked /usr/lib/debug/usr/lib/libutilX.so.1.1.0.debug to /usr/lib/debug/usr/lib/libutilX.so.1.debug [ 43s] symlinked /usr/lib/debug/usr/lib/libutilX.so.1.1.0.debug to /usr/lib/debug/usr/lib/libutilX.so.debug [ 43s] 158 blocks [ 43s] + /usr/lib/rpm/check-buildroot [ 43s] + /usr/lib/rpm//brp-compress [ 43s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 43s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 44s] + /usr/lib/rpm/brp-python-hardlink [ 44s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libslp-utilx-0.5.4-1.1.arm [ 44s] Processing files: libslp-utilx-0.5.4-1.1.armv7l [ 44s] Provides: libutilX.so.1 [ 44s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 44s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 44s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 44s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 44s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libX11.so.6 libXdamage.so.1 libXext.so.6 libXrandr.so.2 libXv.so.1 libc.so.6 libc.so.6(GLIBC_2.15) libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpthread.so.0 libpthread.so.0(GLIBC_2.4) libttrace.so.1 rtld(GNU_HASH) [ 44s] Processing files: libslp-utilx-debuginfo-0.5.4-1.1.armv7l [ 44s] Processing files: libslp-utilx-debugsource-0.5.4-1.1.armv7l [ 44s] Processing files: libslp-utilx-devel-0.5.4-1.1.armv7l [ 44s] Provides: pkgconfig(utilX) = 1.1.0 [ 44s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 44s] Requires: /usr/bin/pkg-config libutilX.so.1 pkgconfig(x11) pkgconfig(xproto) [ 44s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libslp-utilx-0.5.4-1.1.arm [ 44s] Wrote: /home/abuild/rpmbuild/SRPMS/libslp-utilx-0.5.4-1.1.src.rpm [ 44s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libslp-utilx-0.5.4-1.1.armv7l.rpm [ 44s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libslp-utilx-debuginfo-0.5.4-1.1.armv7l.rpm [ 44s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libslp-utilx-debugsource-0.5.4-1.1.armv7l.rpm [ 44s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libslp-utilx-devel-0.5.4-1.1.armv7l.rpm [ 44s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.SZDAeB [ 44s] + umask 022 [ 44s] + cd /home/abuild/rpmbuild/BUILD [ 44s] + cd libslp-utilx-0.5.4 [ 44s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libslp-utilx-0.5.4-1.1.arm [ 44s] + exit 0 [ 44s] ... checking for files with abuild user/group [ 44s] ... creating baselibs [ 44s] ... saving built statistics [ 44s] ... saving built packages [ 44s] /home/abuild/rpmbuild/RPMS/armv7l/libslp-utilx-0.5.4-1.1.armv7l.rpm [ 44s] /home/abuild/rpmbuild/RPMS/armv7l/libslp-utilx-debuginfo-0.5.4-1.1.armv7l.rpm [ 44s] /home/abuild/rpmbuild/RPMS/armv7l/libslp-utilx-debugsource-0.5.4-1.1.armv7l.rpm [ 44s] /home/abuild/rpmbuild/RPMS/armv7l/libslp-utilx-devel-0.5.4-1.1.armv7l.rpm [ 44s] /home/abuild/rpmbuild/SRPMS/libslp-utilx-0.5.4-1.1.src.rpm [ 44s] /home/abuild/rpmbuild/OTHER/_statistics [ 44s] [ 44s] w04 finished "build libslp-utilx.spec" at Thu Oct 29 05:13:01 UTC 2015. [ 44s] [ 47s] /.build/build: line 368: 236 Killed background_monitor_process [ 49s] [ 40.731405] SysRq : Power Off [ 49s] [ 40.952491] Power down. [ 50s] build: extracting built packages... [ 50s] libslp-utilx-0.5.4-1.1.armv7l.rpm [ 50s] libslp-utilx-debuginfo-0.5.4-1.1.armv7l.rpm [ 50s] libslp-utilx-debugsource-0.5.4-1.1.armv7l.rpm [ 50s] libslp-utilx-devel-0.5.4-1.1.armv7l.rpm [ 50s] libslp-utilx-0.5.4-1.1.src.rpm [ 50s] _statistics