[    0s] Using BUILD_ROOT=/srv/build/root_6/.mount
[    0s] Using BUILD_ARCH=armv7l:armv5tel
[    0s] Doing kvm build in /srv/build/root_6/root
[    0s] 
[    0s] 
[    0s] w29 started "build _service:gbs:libtbm.spec" at Thu Oct 29 05:09:48 UTC 2015.
[    0s] 
[    0s] Building libtbm for project 'Tizen:2.4:Mobile' repository 'target-TM1' arch 'armv7l' srcmd5 '07fed327d15ff91fe63541ca80e463b3'
[    0s] 
[    0s] processing specfile /srv/build/root_6/.build-srcdir/_service:gbs:libtbm.spec ...
[    0s] running changelog2spec --target rpm --file /srv/build/root_6/.build-srcdir/_service:gbs:libtbm.spec
[    0s] init_buildsystem --configdir /var/run/obs/worker/6/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_6/.build.rpmlist /srv/build/root_6/.build-srcdir/_service:gbs:libtbm.spec build rpmlint-Factory ...
[    0s] registering binfmt handlers for VM
[    0s] /.build/qemu-reg: No such file or directory
[    0s] /.build/qemu-reg: failed. Trying alternate binfmt file
[    0s] write: Invalid argument
[    0s] /proc/sys/fs/binfmt_misc/register: write failed
[    0s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P
[    0s] 
[    0s] /usr/lib/build/qemu-reg: binfmt registration failed
[    0s] cycle: filesystem -> setup
[    0s]   breaking dependency setup -> filesystem
[    0s] cycle: glibc -> glibc-common -> bash
[    0s]   breaking dependency glibc-common -> bash
[    0s] cycle: glibc -> glibc-common -> coreutils -> bash
[    0s]   breaking dependency coreutils -> bash
[    0s] cycle: glibc -> glibc-common -> coreutils
[    0s]   breaking dependency coreutils -> glibc
[    0s] cycle: glibc -> glibc-common -> coreutils -> libacl
[    0s]   breaking dependency libacl -> glibc
[    0s] cycle: glibc -> glibc-common -> coreutils -> libacl -> libattr
[    0s]   breaking dependency libattr -> glibc
[    0s] cycle: libgcc -> glibc -> glibc-common -> coreutils -> libacl -> libattr
[    0s]   breaking dependency libacl -> libattr
[    0s] cycle: libgcc -> glibc -> glibc-common -> coreutils -> libacl
[    0s]   breaking dependency glibc-common -> coreutils
[    0s] cycle: glibc -> glibc-common
[    0s]   breaking dependency glibc -> glibc-common
[    0s] cycle: libgcc -> glibc
[    0s]   breaking dependency libgcc -> glibc
[    0s] cycle: rpm-libs -> rpm
[    0s]   breaking dependency rpm-libs -> rpm
[    0s] [1/52] preinstalling tizen-release...
[    0s] [2/52] preinstalling libgcc...
[    1s] [3/52] preinstalling setup...
[    1s] [4/52] preinstalling filesystem...
[    1s] [5/52] preinstalling glibc...
[    1s] [6/52] preinstalling libattr...
[    1s] [7/52] preinstalling libacl...
[    1s] [8/52] preinstalling bash...
[    1s] [9/52] preinstalling bzip2-libs...
[    1s] [10/52] preinstalling diffutils...
[    1s] [11/52] preinstalling elfutils-libelf...
[    1s] [12/52] preinstalling libcap...
[    1s] [13/52] preinstalling liblua...
[    1s] [14/52] preinstalling libstdc++...
[    1s] [15/52] preinstalling ncurses-libs...
[    1s] [16/52] preinstalling nspr...
[    1s] [17/52] preinstalling nss-softokn-freebl...
[    1s] [18/52] preinstalling popt...
[    1s] [19/52] preinstalling readline...
[    1s] [20/52] preinstalling sed...
[    1s] [21/52] preinstalling sqlite...
[    1s] [22/52] preinstalling xz-libs...
[    1s] [23/52] preinstalling zlib...
[    1s] [24/52] preinstalling glibc-common...
[    1s] [25/52] preinstalling tar...
[    1s] [26/52] preinstalling coreutils...
[    1s] [27/52] preinstalling qemu-linux-user-x86-arm...
[    1s] [28/52] preinstalling tizen-accelerator...
[    1s] [29/52] preinstalling libfile...
[    1s] [30/52] preinstalling bzip2...
[    1s] [31/52] preinstalling nss...
[    1s] [32/52] preinstalling bzip2-libs-x86-arm...
[    1s] [33/52] preinstalling elfutils-libelf-x86-arm...
[    1s] [34/52] preinstalling glibc-x86-arm...
[    1s] [35/52] preinstalling libacl-x86-arm...
[    2s] [36/52] preinstalling libattr-x86-arm...
[    2s] [37/52] preinstalling libcap-x86-arm...
[    2s] [38/52] preinstalling libgcc-x86-arm...
[    2s] [39/52] preinstalling liblua-x86-arm...
[    2s] [40/52] preinstalling ncurses-libs-x86-arm...
[    2s] [41/52] preinstalling nspr-x86-arm...
[    2s] [42/52] preinstalling nss-softokn-freebl-x86-arm...
[    2s] [43/52] preinstalling nss-x86-arm...
[    2s] [44/52] preinstalling popt-x86-arm...
[    2s] [45/52] preinstalling sqlite-x86-arm...
[    2s] [46/52] preinstalling xz-libs-x86-arm...
[    2s] [47/52] preinstalling zlib-x86-arm...
[    2s] [48/52] preinstalling rpm-libs...
[    2s] [49/52] preinstalling bash-x86-arm...
[    2s] [50/52] preinstalling rpm-libs-x86-arm...
[    2s] [51/52] preinstalling rpm...
[    2s] [52/52] preinstalling rpm-x86-arm...
[    2s] 
[    2s] cycle: perl -> perl-libs
[    2s]   breaking dependency perl-libs -> perl
[    2s] [1/8] preinstalling e2fsprogs-libs...
[    2s] [2/8] preinstalling libpcre...
[    2s] [3/8] preinstalling libuuid...
[    2s] [4/8] preinstalling grep...
[    2s] [5/8] preinstalling libblkid...
[    2s] [6/8] preinstalling util-linux...
[    2s] [7/8] preinstalling perl-libs...
[    2s] [8/8] preinstalling perl...
[    2s] copying packages...
[    3s] reordering...cycle: bash -> glibc -> glibc-common
[    3s]   breaking dependency glibc-common -> bash
[    3s] cycle: bash -> glibc -> glibc-common -> coreutils
[    3s]   breaking dependency glibc-common -> coreutils
[    3s] cycle: glibc -> glibc-common -> findutils
[    3s]   breaking dependency glibc-common -> findutils
[    3s] cycle: glibc -> glibc-common
[    3s]   breaking dependency glibc-common -> glibc
[    3s] cycle: glibc -> glibc-common -> grep
[    3s]   breaking dependency grep -> glibc
[    3s] cycle: glibc -> glibc-common -> grep -> libgcc
[    3s]   breaking dependency grep -> libgcc
[    3s] cycle: glibc -> glibc-common -> grep -> libpcre
[    3s]   breaking dependency libpcre -> glibc
[    3s] cycle: glibc -> glibc-common -> grep -> libpcre -> libgcc
[    3s]   breaking dependency libpcre -> libgcc
[    3s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++
[    3s]   breaking dependency libstdc++ -> glibc
[    3s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++ -> libgcc
[    3s]   breaking dependency glibc -> glibc-common
[    3s] cycle: glibc -> libgcc
[    3s]   breaking dependency libgcc -> glibc
[    3s] cycle: filesystem -> setup
[    3s]   breaking dependency setup -> filesystem
[    3s] cycle: ncurses -> ncurses-libs
[    3s]   breaking dependency ncurses-libs -> ncurses
[    3s] cycle: ncurses-base -> ncurses -> ncurses-libs
[    3s]   breaking dependency ncurses-libs -> ncurses-base
[    3s] cycle: perl -> perl-libs
[    3s]   breaking dependency perl -> perl-libs
[    3s] cycle: perl -> perl-IO-Compress-Zlib
[    3s]   breaking dependency perl -> perl-IO-Compress-Zlib
[    3s] cycle: perl -> perl-IO-Compress-Base
[    3s]   breaking dependency perl -> perl-IO-Compress-Base
[    3s] cycle: perl -> perl-Module-Pluggable
[    3s]   breaking dependency perl -> perl-Module-Pluggable
[    3s] cycle: perl -> perl-Pod-Simple
[    3s]   breaking dependency perl -> perl-Pod-Simple
[    3s] cycle: nss -> nss-sysinit
[    3s]   breaking dependency nss -> nss-sysinit
[    3s] cycle: rpm-libs -> rpm
[    3s]   breaking dependency rpm-libs -> rpm
[    3s] done
[   13s] booting kvm ...
[   13s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 8000 -drive file=/srv/build/root_6/root,if=virtio,cache=none -drive file=/srv/build/root_6/root,if=ide,index=0,cache=none -drive file=/srv/build/root_6/swap,if=virtio,cache=none -smp 4
[   17s] doing fast boot
[   17s] Creating device nodes with udev
[   31s] Waiting for device /dev/vda to appear:  ok
[   31s] fsck from util-linux 2.21.2
[   31s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda 
[   31s] /dev/vda: clean, 4723/2392064 files, 224240/9568256 blocks
[   31s] fsck succeeded. Mounting root device read-write.
[   31s] Mounting root /dev/vda
[   31s] mount -o rw -t ext4 /dev/vda /root
[   34s] replacing /etc/mtab with symlink to /proc/self/mounts
[   37s] /.build/qemu-reg: line 9: interpreter '/usr/bin/qemu-armeb-binfmt' not found, ignoring
[   37s] /.build/qemu-reg: line 10: interpreter '/usr/bin/qemu-ppc-binfmt' not found, ignoring
[   37s] /.build/qemu-reg: line 11: interpreter '/usr/bin/qemu-mips-binfmt' not found, ignoring
[   37s] /.build/qemu-reg: line 12: interpreter '/usr/bin/qemu-mipsel-binfmt' not found, ignoring
[   37s] /.build/qemu-reg: line 18: interpreter '/usr/bin/qemu-sh4-binfmt' not found, ignoring
[   37s] /.build/qemu-reg: line 19: interpreter '/usr/bin/qemu-sh4eb-binfmt' not found, ignoring
[   47s] 2nd stage started in virtual machine
[   47s] machine type: armv7l
[   48s] swapon on /dev/vdb
[   48s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order
[   48s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648
[   49s] VM_IMAGE: , VM_SWAP: /dev/vdb
[   51s] logging output to //.build.log...
[   51s] processing specfile /.build-srcdir/_service:gbs:libtbm.spec ...
[   52s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:libtbm.spec build rpmlint-Factory ...
[   64s] running rpm-x86-arm postinstall script
[   64s] running rpm-libs-x86-arm postinstall script
[   65s] running tizen-accelerator postinstall script
[   65s] running glibc-x86-arm postinstall script
[   66s] running bash-x86-arm postinstall script
[   66s] initializing rpm db...
[   72s] [1/192] cumulate cross-armv7l-platformfile-0.0.1-1.1
[   72s] [2/192] cumulate kernel-headers-3.4.91-1.1
[   72s] [3/192] cumulate libX11-common-1.6.2-1.1
[   72s] [4/192] cumulate tizen-release-2.2.0-1.1
[   72s] [5/192] cumulate tzdata-2014j-1.1
[   73s] [6/192] cumulate libgcc-4.9.2-2015.02.1.11
[   73s] [7/192] cumulate setup-0.2-1.1
[   73s] [8/192] cumulate filesystem-0.1-1.1
[   73s] [9/192] cumulate glibc-2.20-2014.11.1.10
[   74s] [10/192] cumulate libstdc++-4.9.2-2015.02.1.11
[   74s] [11/192] cumulate libatomic-4.9.2-2015.02.1.11
[   74s] [12/192] cumulate libgomp-4.9.2-2015.02.1.11
[   74s] [13/192] cumulate openssl-1.0.1p-1.5
[   74s] [14/192] cumulate bash-4.1-1.6
[   74s] [15/192] cumulate bzip2-libs-1.0.5-1.8
[   74s] [16/192] cumulate capi-base-common-0.2.2-1.1
[   74s] [17/192] cumulate cpio-2.8-1.6
[   75s] [18/192] cumulate db4-4.8.30-1.8
[   75s] [19/192] cumulate diffutils-3.0-1.6
[   75s] [20/192] cumulate e2fsprogs-libs-1.41.9-1.4
[   75s] [21/192] cumulate elfutils-libelf-0.152-1.12
[   75s] [22/192] cumulate expat-2.0.1-1.8
[   75s] [23/192] cumulate fdupes-1.40-1.5
[   75s] [24/192] cumulate findutils-4.2.31-1.5
[   75s] [25/192] cumulate gdbm-1.8.3-1.12
[   75s] [26/192] cumulate libXau-1.0.8-1.1
[   75s] [27/192] cumulate libattr-2.4.44-1.8
[   75s] [28/192] cumulate libdrm2-2.4.35-1.1
[   75s] [29/192] cumulate libitm-4.9.2-2015.02.1.11
[   75s] [30/192] cumulate libkms1-2.4.35-1.1
[   75s] [31/192] cumulate liblua-5.1.4-1.6
[   75s] [32/192] cumulate libuuid-2.20.2-1.4
[   75s] [33/192] cumulate m4-1.4.14-1.5
[   75s] [34/192] cumulate net-tools-1.60-2.6
[   75s] [35/192] cumulate nspr-4.9-1.9
[   75s] [36/192] cumulate nss-softokn-freebl-3.12.9-1.17
[   75s] [37/192] cumulate patch-2.6-1.6
[   75s] [38/192] cumulate pkg-config-0.25-2.6
[   75s] [39/192] cumulate popt-1.16-1.8
[   76s] [40/192] cumulate readline-5.2-1.6
[   76s] [41/192] cumulate ruby-1.9.2-1.6
[   76s] [42/192] cumulate sed-4.1.5-1.5
[   76s] [43/192] cumulate sqlite-3.8.10.2-1.8
[   76s] [44/192] cumulate xz-libs-5.0.3-1.8
[   76s] [45/192] cumulate zlib-1.2.8-1.8
[   76s] [46/192] cumulate libasan-4.9.2-2015.02.1.11
[   76s] [47/192] cumulate libpcre-7.7-1.25
[   76s] [48/192] cumulate libubsan-4.9.2-2015.02.1.11
[   76s] [49/192] cumulate patchelf-0.5.svn20809-1.5
[   76s] [50/192] cumulate ncurses-libs-5.7-1.8
[   76s] [51/192] cumulate build-compare-2009.10.14-1.6
[   76s] [52/192] cumulate libpthread-stubs-0.3-1.1
[   76s] [53/192] cumulate qemu-linux-user-x86-arm-2.2.0-4.1.1
[   76s] [54/192] cumulate xorg-x11-proto-core-7.0.31-1.1
[   76s] [55/192] cumulate xorg-x11-proto-dri2-2.8-1.1
[   76s] [56/192] cumulate xorg-x11-proto-kb-1.0.6-1.1
[   76s] [57/192] cumulate xorg-x11-proto-xext-7.3.1-1.1
[   76s] [58/192] cumulate capi-base-common-devel-0.2.2-1.1
[   76s] [59/192] cumulate cpp-4.9.2-2015.02.1.11
[   76s] [60/192] cumulate glibc-headers-2.20-2014.11.1.10
[   76s] [61/192] cumulate libcap-2.21-1.6
[   76s] [62/192] cumulate unzip-6.0-1.12
[   76s] [63/192] cumulate grep-2.5.1a-1.5
[   76s] [64/192] cumulate libacl-2.2.49-1.5
[   76s] [65/192] cumulate libdrm-devel-2.4.35-1.1
[   76s] [66/192] cumulate libfile-5.04-1.7
[   76s] [67/192] cumulate libpython-2.7.1-1.5
[   76s] [68/192] cumulate libxcb-1.10.0-1.1
[   76s] [69/192] cumulate libxml2-2.9.2-1.3
[   76s] [70/192] cumulate make-3.82-154.1.6
[   76s] [71/192] cumulate ncurses-5.7-1.8
[   76s] [72/192] cumulate pcre-7.7-1.25
[   76s] [73/192] cumulate psmisc-22.20-1.6
[   76s] [74/192] cumulate binutils-2.25.0-2015.01.1.8
[   77s] [75/192] cumulate bzip2-1.0.5-1.8
[   77s] [76/192] cumulate libblkid-2.20.2-1.4
[   77s] [77/192] cumulate xz-5.0.3-1.8
[   77s] [78/192] cumulate elfutils-libs-0.152-1.12
[   77s] [79/192] cumulate nss-3.12.9-1.17
[   77s] [80/192] cumulate perl-5.12.1-1.25
[   77s] [81/192] cumulate ncurses-base-5.7-1.8
[   77s] [82/192] cumulate perl-HTML-Tagset-3.20-1.1
[   77s] [83/192] cumulate perl-IO-Compress-Base-2.008-1.25
[   77s] [84/192] cumulate perl-Module-Pluggable-3.60-1.25
[   77s] [85/192] cumulate perl-Pod-Escapes-1.04-1.25
[   77s] [86/192] cumulate perl-TimeDate-1.20-1.1
[   77s] [87/192] cumulate perl-URI-1.54-1.1
[   77s] [88/192] cumulate glibc-devel-2.20-2014.11.1.10
[   77s] [89/192] cumulate xorg-x11-proto-fixes-5.0-1.1
[   77s] [90/192] cumulate file-5.04-1.7
[   77s] [91/192] cumulate libXau-devel-1.0.8-1.1
[   77s] [92/192] cumulate libxslt-1.1.28-1.2
[   77s] [93/192] cumulate perl-Compress-Raw-Zlib-2.008-1.25
[   77s] [94/192] cumulate perl-libs-5.12.1-1.25
[   77s] [95/192] cumulate tar-1.17-1.6
[   77s] [96/192] cumulate coreutils-6.9-1.6
[   77s] [97/192] cumulate libX11-1.6.2-1.1
[   77s] [98/192] cumulate libmount-2.20.2-1.4
[   77s] [99/192] cumulate xz-lzma-compat-5.0.3-1.8
[   77s] [100/192] cumulate elfutils-0.152-1.12
[   77s] [101/192] cumulate nss-sysinit-3.12.9-1.17
[   77s] [102/192] cumulate python-base-2.7.1-1.5
[   77s] [103/192] cumulate glibc-common-2.20-2014.11.1.10
[   77s] [104/192] cumulate libarchive-2.8.3-1.2
[   77s] [105/192] cumulate rpm-libs-4.9.1-4.3.1.10
[   77s] [106/192] cumulate libstdc++-devel-4.9.2-2015.02.1.11
[   77s] [107/192] cumulate perl-Pod-Simple-3.07-1.25
[   77s] [108/192] cumulate tizen-accelerator-1.0.1-1.1
[   77s] [109/192] cumulate libXext-1.3.2-1.1
[   77s] [110/192] cumulate libXfixes-5.0.1-1.1
[   77s] [111/192] cumulate perl-IO-Compress-Zlib-2.008-1.25
[   77s] [112/192] cumulate gawk-3.1.5-1.6
[   77s] [113/192] cumulate gzip-1.3.12-1.6
[   77s] [114/192] cumulate libxcb-devel-1.10.0-1.1
[   77s] [115/192] cumulate perl-HTML-Parser-3.65-1.5
[   77s] [116/192] cumulate python-xml-2.7.1-1.5
[   77s] [117/192] cumulate autoconf-2.68-1.1
[   78s] [118/192] cumulate build-2011.01.10a-1.1
[   78s] [119/192] installing rpm-4.9.1-4.3.1.10
[   78s] [120/192] cumulate python-lxml-2.2.3-1.2
[   78s] [121/192] cumulate util-linux-2.20.2-1.4
[   78s] [122/192] cumulate cmake-2.8.5-1.1.2
[   78s] [123/192] cumulate python-2.7.1-1.3
[   78s] [124/192] cumulate gcc-4.9.2-2015.02.1.11
[   78s] [125/192] cumulate automake-1.11.1-1.1
[   78s] [126/192] cumulate bzip2-libs-x86-arm-1.0.5-9.1.4
[   78s] [127/192] cumulate elfutils-libelf-x86-arm-0.152-9.1.4
[   78s] [128/192] cumulate elfutils-libs-x86-arm-0.152-9.1.4
[   78s] [129/192] cumulate expat-x86-arm-2.0.1-1.4
[   78s] [130/192] cumulate glibc-x86-arm-2.20-9.1.5
[   78s] [131/192] cumulate libacl-x86-arm-2.2.49-9.1.4
[   78s] [132/192] cumulate libarchive-x86-arm-2.8.3-1.3
[   78s] [133/192] cumulate libattr-x86-arm-2.4.44-9.1.4
[   78s] [134/192] cumulate libcap-x86-arm-2.21-9.1.4
[   78s] [135/192] cumulate libfile-x86-arm-5.04-9.1.4
[   78s] [136/192] cumulate libgcc-x86-arm-4.9.2-9.1.4
[   78s] [137/192] cumulate liblua-x86-arm-5.1.4-9.1.3
[   78s] [138/192] cumulate libpython-x86-arm-2.7.1-9.1.3
[   78s] [139/192] cumulate libstdc++-x86-arm-4.9.2-9.1.4
[   78s] [140/192] cumulate libxml2-x86-arm-2.9.2-9.1.3
[   78s] [141/192] cumulate libxslt-x86-arm-1.1.28-9.1.3
[   78s] [142/192] cumulate ncurses-libs-x86-arm-5.7-9.1.3
[   78s] [143/192] cumulate nspr-x86-arm-4.9-9.1.5
[   78s] [144/192] cumulate nss-softokn-freebl-x86-arm-3.12.9-9.1.5
[   78s] [145/192] cumulate nss-x86-arm-3.12.9-9.1.5
[   78s] [146/192] cumulate openssl-x86-arm-1.0.1p-9.1.3
[   79s] [147/192] cumulate perl-libs-x86-arm-5.12.1-9.1.5
[   79s] [148/192] cumulate popt-x86-arm-1.16-9.1.4
[   79s] [149/192] cumulate python-lxml-x86-arm-2.2.3-9.1.3
[   79s] [150/192] cumulate python-x86-arm-2.7.1-9.1.3
[   79s] [151/192] cumulate python-xml-x86-arm-2.7.1-9.1.3
[   79s] [152/192] cumulate rpm-libs-x86-arm-4.9.1-9.1.4
[   79s] [153/192] cumulate sqlite-x86-arm-3.8.10.2-9.1.3
[   79s] [154/192] cumulate xz-libs-x86-arm-5.0.3-9.1.4
[   79s] [155/192] cumulate zlib-x86-arm-1.2.8-9.1.4
[   79s] [156/192] cumulate gcc-c++-4.9.2-2015.02.1.11
[   79s] [157/192] cumulate libdri2-0.2.1-1.1
[   79s] [158/192] cumulate perl-Compress-Zlib-2.008-1.25
[   79s] [159/192] cumulate libX11-devel-1.6.2-1.1
[   79s] [160/192] cumulate rpm-build-4.9.1-4.3.1.10
[   79s] [161/192] cumulate bash-x86-arm-4.1-9.1.4
[   79s] [162/192] cumulate diffutils-x86-arm-3.0-9.1.4
[   79s] [163/192] cumulate fdupes-x86-arm-1.40-9.1.4
[   79s] [164/192] cumulate findutils-x86-arm-4.2.31-9.1.4
[   79s] [165/192] cumulate gawk-x86-arm-3.1.5-9.1.3
[   79s] [166/192] cumulate gzip-x86-arm-1.3.12-9.1.4
[   79s] [167/192] cumulate libtool-2.2.6b-1.8
[   79s] [168/192] cumulate m4-x86-arm-1.4.14-9.1.4
[   79s] [169/192] cumulate make-x86-arm-3.82-9.1.3
[   79s] [170/192] cumulate patch-x86-arm-2.6-9.1.4
[   79s] [171/192] cumulate perl-libwww-perl-5.836-1.1
[   79s] [172/192] cumulate pkg-config-x86-arm-0.25-9.1.4
[   79s] [173/192] cumulate ruby-x86-arm-1.9.2-9.1.4
[   79s] [174/192] cumulate sed-x86-arm-4.1.5-9.1.4
[   79s] [175/192] cumulate bzip2-x86-arm-1.0.5-1.4
[   79s] [176/192] cumulate libXfixes-devel-5.0.1-1.1
[   79s] [177/192] cumulate perl-x86-arm-5.12.1-9.1.5
[   79s] [178/192] cumulate python-base-x86-arm-2.7.1-9.1.3
[   79s] [179/192] cumulate coreutils-x86-arm-6.9-9.1.4
[   79s] [180/192] cumulate cross-armv7l-gcc-accel-x86-armv7l-4.9.2-2015.02.1.6
[   79s] [181/192] cumulate file-x86-arm-5.04-9.1.4
[   79s] [182/192] cumulate tar-x86-arm-1.17-9.1.4
[   79s] [183/192] cumulate elfutils-x86-arm-0.152-9.1.4
[   79s] [184/192] cumulate cmake-x86-arm-2.8.5-1.3
[   79s] [185/192] cumulate rpm-x86-arm-4.9.1-9.1.4
[   79s] [186/192] cumulate rpm-build-x86-arm-4.9.1-9.1.4
[   79s] [187/192] cumulate libdri2-devel-0.2.1-1.1
[   79s] [188/192] cumulate perl-HTML-Parser-x86-arm-3.65-9.1.3
[   79s] [189/192] cumulate cross-armv7l-binutils-accel-x86-armv7l-2.25.0-2015.01.1.3
[   79s] [190/192] cumulate perl-XML-Parser-2.36-1.6
[   79s] [191/192] cumulate perl-XML-Parser-x86-arm-2.36-9.1.3
[   79s] [192/192] now installing cumulated packages
[   80s] Preparing...                ##################################################
[   80s] setup                       ##################################################
[   80s] filesystem                  ##################################################
[   80s] tzdata                      ##################################################
[   80s] libX11-common               ##################################################
[   80s] tizen-release               ##################################################
[   80s] kernel-headers              ##################################################
[   80s] cross-armv7l-platformfile   ##################################################
[   80s] bash                        ##################################################
[   80s] findutils                   ##################################################
[   80s] grep                        ##################################################
[   80s] coreutils                   ##################################################
[   80s] glibc-common                ##################################################
[   81s] libgcc                      ##################################################
[   81s] /sbin/ldconfig: relative path `1' used to build cache
[   81s] warning: %post(libgcc-4.9.2-2015.02.1.11.armv7l) scriptlet failed, exit status 1
[   81s] glibc                       ##################################################
[   81s] libstdc++                   ##################################################
[   81s] libattr                     ##################################################
[   81s] libacl                      ##################################################
[   81s] libpcre                     ##################################################
[   81s] tizen-accelerator           ##################################################
[   82s] glibc-x86-arm               ##################################################
[   83s] libattr-x86-arm             ##################################################
[   83s] libacl-x86-arm              ##################################################
[   83s] libgcc-x86-arm              ##################################################
[   83s] libstdc++-x86-arm           ##################################################
[   83s] glibc-headers               ##################################################
[   83s] glibc-devel                 ##################################################
[   84s] libstdc++-devel             ##################################################
[   84s] coreutils-x86-arm           ##################################################
[   87s] bash-x86-arm                ##################################################
[   87s] findutils-x86-arm           ##################################################
[   87s] build-compare               ##################################################
[  100s] qemu-linux-user-x86-arm     ##################################################
[  100s] pkg-config                  ##################################################
[  101s] zlib                        ##################################################
[  101s] zlib-x86-arm                ##################################################
[  101s] bzip2-libs                  ##################################################
[  101s] bzip2-libs-x86-arm          ##################################################
[  101s] elfutils-libelf             ##################################################
[  101s] xz-libs                     ##################################################
[  101s] ncurses-libs                ##################################################
[  101s] ncurses                     ##################################################
[  101s] ncurses-base                ##################################################
[  101s] libpython                   ##################################################
[  101s] xz-libs-x86-arm             ##################################################
[  101s] elfutils-libelf-x86-arm     ##################################################
[  101s] xorg-x11-proto-core         ##################################################
[  102s] python-base                 ##################################################
[  102s] libxml2                     ##################################################
[  102s] binutils                    ##################################################
[  102s] libfile                     ##################################################
[  102s] openssl                     ##################################################
[  103s] expat                       ##################################################
[  103s] libuuid                     ##################################################
[  103s] nspr                        ##################################################
[  103s] popt                        ##################################################
[  103s] sed                         ##################################################
[  103s] sqlite                      ##################################################
[  103s] popt-x86-arm                ##################################################
[  103s] nspr-x86-arm                ##################################################
[  103s] libfile-x86-arm             ##################################################
[  103s] libblkid                    ##################################################
[  103s] libarchive                  ##################################################
[  103s] file                        ##################################################
[  103s] libxslt                     ##################################################
[  103s] xz                          ##################################################
[  103s] elfutils-libs               ##################################################
[  103s] elfutils                    ##################################################
[  103s] bzip2                       ##################################################
[  103s] tar                         ##################################################
[  103s] libcap                      ##################################################
[  103s] libcap-x86-arm              ##################################################
[  104s] diffutils                   ##################################################
[  104s] libXau                      ##################################################
[  104s] libxcb                      ##################################################
[  104s] libX11                      ##################################################
[  104s] liblua                      ##################################################
[  104s] liblua-x86-arm              ##################################################
[  104s] m4                          ##################################################
[  104s] nss-softokn-freebl          ##################################################
[  104s] nss                         ##################################################
[  104s] nss-sysinit                 ##################################################
[  105s] nss-x86-arm                 ##################################################
[  105s] rpm-libs                    ##################################################
[  105s] rpm-libs-x86-arm            ##################################################
[  105s] patch                       ##################################################
[  106s] gawk                        ##################################################
[  106s] gzip                        ##################################################
[  106s] libXau-devel                ##################################################
[  106s] elfutils-libs-x86-arm       ##################################################
[  106s] libarchive-x86-arm          ##################################################
[  106s] openssl-x86-arm             ##################################################
[  107s] libxml2-x86-arm             ##################################################
[  107s] libpython-x86-arm           ##################################################
[  107s] libpthread-stubs            ##################################################
[  107s] libxcb-devel                ##################################################
[  107s] xorg-x11-proto-dri2         ##################################################
[  107s] xorg-x11-proto-kb           ##################################################
[  107s] libX11-devel                ##################################################
[  107s] xorg-x11-proto-xext         ##################################################
[  107s] xorg-x11-proto-fixes        ##################################################
[  107s] libXext                     ##################################################
[  107s] libdri2                     ##################################################
[  107s] libXfixes                   ##################################################
[  107s] libXfixes-devel             ##################################################
[  107s] xz-lzma-compat              ##################################################
[  107s] python-lxml                 ##################################################
[  108s] cmake                       ##################################################
[  108s] libmount                    ##################################################
[  108s] python-xml                  ##################################################
[  108s] cpp                         ##################################################
[  108s] libasan                     ##################################################
[  108s] libubsan                    ##################################################
[  108s] libatomic                   ##################################################
[  108s] libgomp                     ##################################################
[  108s] capi-base-common            ##################################################
[  108s] cpio                        ##################################################
[  108s] db4                         ##################################################
[  108s] fdupes                      ##################################################
[  109s] gdbm                        ##################################################
[  109s] perl-Pod-Escapes            ##################################################
[  109s] perl-Compress-Raw-Zlib      ##################################################
[  109s] perl-IO-Compress-Base       ##################################################
[  110s] perl-Module-Pluggable       ##################################################
[  110s] perl-Pod-Simple             ##################################################
[  110s] perl-IO-Compress-Zlib       ##################################################
[  110s] perl-libs                   ##################################################
[  112s] perl                        ##################################################
[  112s] perl-URI                    ##################################################
[  112s] autoconf                    ##################################################
[  112s] automake                    ##################################################
[  112s] perl-HTML-Tagset            ##################################################
[  112s] perl-TimeDate               ##################################################
[  112s] perl-Compress-Zlib          ##################################################
[  112s] perl-libs-x86-arm           ##################################################
[  113s] perl-x86-arm                ##################################################
[  114s] perl-HTML-Parser            ##################################################
[  114s] perl-libwww-perl            ##################################################
[  114s] perl-XML-Parser             ##################################################
[  114s] libdrm2                     ##################################################
[  114s] libitm                      ##################################################
[  115s] gcc                         ##################################################
[  116s] gcc-c++                     ##################################################
[  119s] cross-armv7l-gcc-accel-x86-a##################################################
[  119s] "GCCVER: 4.9 GCCVER_NEW: 4.9 "
[  119s] GCC and GCC-accel versions match. Enabling cross-compiler.
[  119s] libkms1                     ##################################################
[  119s] readline                    ##################################################
[  119s] python                      ##################################################
[  120s] ruby                        ##################################################
[  120s] unzip                       ##################################################
[  120s] rpm-build                   ##################################################
[  120s] make                        ##################################################
[  120s] make-x86-arm                ##################################################
[  120s] rpm-build-x86-arm           ##################################################
[  121s] ruby-x86-arm                ##################################################
[  121s] python-x86-arm              ##################################################
[  121s] libdrm-devel                ##################################################
[  121s] cross-armv7l-binutils-accel-##################################################
[  121s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/addr2line': File exists
[  122s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ar': File exists
[  122s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/as': File exists
[  122s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/c++filt': File exists
[  122s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/elfedit': File exists
[  122s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/gprof': File exists
[  122s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld': File exists
[  122s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld.bfd': File exists
[  122s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld.gold': File exists
[  122s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/nm': File exists
[  122s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/objcopy': File exists
[  122s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/objdump': File exists
[  122s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ranlib': File exists
[  122s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/readelf': File exists
[  122s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/size': File exists
[  122s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/strings': File exists
[  122s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/strip': File exists
[  122s] perl-XML-Parser-x86-arm     ##################################################
[  122s] perl-HTML-Parser-x86-arm    ##################################################
[  122s] build                       ##################################################
[  122s] libtool                     ##################################################
[  122s] fdupes-x86-arm              ##################################################
[  122s] capi-base-common-devel      ##################################################
[  122s] python-xml-x86-arm          ##################################################
[  123s] cmake-x86-arm               ##################################################
[  123s] python-lxml-x86-arm         ##################################################
[  123s] libdri2-devel               ##################################################
[  124s] python-base-x86-arm         ##################################################
[  125s] elfutils-x86-arm            ##################################################
[  125s] gzip-x86-arm                ##################################################
[  125s] gawk-x86-arm                ##################################################
[  125s] patch-x86-arm               ##################################################
[  125s] rpm-x86-arm                 ##################################################
[  125s] /bin/rpm.orig-arm already present - skipping.
[  125s] /usr/bin/rpm2cpio.orig-arm already present - skipping.
[  125s] /usr/bin/rpmdb.orig-arm already present - skipping.
[  125s] /usr/bin/rpmquery.orig-arm already present - skipping.
[  125s] /usr/bin/rpmsign.orig-arm already present - skipping.
[  125s] /usr/bin/rpmverify.orig-arm already present - skipping.
[  125s] nss-softokn-freebl-x86-arm  ##################################################
[  125s] m4-x86-arm                  ##################################################
[  125s] diffutils-x86-arm           ##################################################
[  125s] tar-x86-arm                 ##################################################
[  125s] bzip2-x86-arm               ##################################################
[  125s] libxslt-x86-arm             ##################################################
[  125s] mv: cannot stat `/usr/bin/xsltproc': No such file or directory
[  125s] file-x86-arm                ##################################################
[  125s] sqlite-x86-arm              ##################################################
[  125s] sed-x86-arm                 ##################################################
[  125s] expat-x86-arm               ##################################################
[  125s] ncurses-libs-x86-arm        ##################################################
[  125s] pkg-config-x86-arm          ##################################################
[  125s] util-linux                  ##################################################
[  125s] psmisc                      ##################################################
[  125s] pcre                        ##################################################
[  125s] patchelf                    ##################################################
[  125s] e2fsprogs-libs              ##################################################
[  125s] net-tools                   ##################################################
[  126s] removing nis flags from //etc/nsswitch.conf...
[  126s] now finalizing build dir...
[  128s] build target is armv7l-tizen-linux
[  128s] -----------------------------------------------------------------
[  128s] I have the following modifications for libtbm.spec:
[  128s] 7c7
[  128s] < Release:        1
[  128s] ---
[  128s] > Release:        %{?release_prefix:%{release_prefix}.}1.1
[  128s] -----------------------------------------------------------------
[  128s] ----- building libtbm.spec (user abuild)
[  128s] -----------------------------------------------------------------
[  128s] -----------------------------------------------------------------
[  128s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:2.4:Mobile/target-TM1/07fed327d15ff91fe63541ca80e463b3-libtbm' /home/abuild/rpmbuild/SOURCES/libtbm.spec
[  128s] Building target platforms: armv7l-tizen-linux
[  128s] Building for target armv7l-tizen-linux
[  128s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.miSOet
[  128s] + umask 022
[  128s] + cd /home/abuild/rpmbuild/BUILD
[  128s] + cd /home/abuild/rpmbuild/BUILD
[  128s] + rm -rf libtbm-1.1.8
[  128s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/libtbm-1.1.8.tar.gz
[  128s] + /bin/tar -xf -
[  128s] + STATUS=0
[  128s] + '[' 0 -ne 0 ']'
[  128s] + cd libtbm-1.1.8
[  128s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w .
[  128s] + exit 0
[  128s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.WwvK7m
[  128s] + umask 022
[  128s] + cd /home/abuild/rpmbuild/BUILD
[  128s] + cd libtbm-1.1.8
[  128s] + LANG=C
[  128s] + export LANG
[  128s] + unset DISPLAY
[  128s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb'
[  128s] + export CFLAGS
[  128s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb'
[  128s] + export CXXFLAGS
[  128s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir'
[  128s] + export FFLAGS
[  128s] + LD_AS_NEEDED=1
[  128s] + export LD_AS_NEEDED
[  128s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb'
[  128s] + export CFLAGS
[  128s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb'
[  128s] + export CXXFLAGS
[  128s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir'
[  128s] + export FFLAGS
[  128s] + autoreconf -v --install --force
[  128s] autoreconf: Entering directory `.'
[  128s] autoreconf: configure.ac: not using Gettext
[  129s] autoreconf: running: aclocal --force 
[  130s] autoreconf: configure.ac: tracing
[  131s] autoreconf: running: libtoolize --copy --force
[  131s] libtoolize: putting auxiliary files in `.'.
[  131s] libtoolize: copying file `./ltmain.sh'
[  131s] libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and
[  131s] libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
[  131s] libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
[  132s] autoreconf: running: /usr/bin/autoconf --force
[  132s] autoreconf: running: /usr/bin/autoheader --force
[  133s] autoreconf: running: automake --add-missing --copy --force-missing
[  133s] configure.ac:29: installing `./config.guess'
[  133s] configure.ac:29: installing `./config.sub'
[  133s] configure.ac:24: installing `./install-sh'
[  133s] configure.ac:24: installing `./missing'
[  133s] src/Makefile.am: installing `./depcomp'
[  133s] Makefile.am: installing `./INSTALL'
[  133s] autoreconf: Leaving directory `.'
[  133s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --with-tbm-platform=X11 'CFLAGS=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -Wall -Werror' 'LDFLAGS= -Wl,--hash-style=both -Wl,--as-needed'
[  134s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc
[  134s] checking whether the C compiler works... yes
[  134s] checking for C compiler default output file name... a.out
[  134s] checking for suffix of executables... 
[  134s] checking whether we are cross compiling... no
[  134s] checking for suffix of object files... o
[  134s] checking whether we are using the GNU C compiler... yes
[  134s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes
[  134s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed
[  134s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E
[  134s] checking for grep that handles long lines and -e... /bin/grep
[  135s] checking for egrep... /bin/grep -E
[  135s] checking for ANSI C header files... yes
[  135s] checking for sys/types.h... yes
[  135s] checking for sys/stat.h... yes
[  135s] checking for stdlib.h... yes
[  135s] checking for string.h... yes
[  135s] checking for memory.h... yes
[  135s] checking for strings.h... yes
[  135s] checking for inttypes.h... yes
[  135s] checking for stdint.h... yes
[  135s] checking for unistd.h... yes
[  135s] checking minix/config.h usability... no
[  136s] checking minix/config.h presence... no
[  136s] checking for minix/config.h... no
[  136s] checking whether it is safe to define __EXTENSIONS__... yes
[  136s] checking for a BSD-compatible install... /usr/bin/install -c
[  137s] checking whether build environment is sane... yes
[  137s] checking for a thread-safe mkdir -p... /bin/mkdir -p
[  137s] checking for gawk... gawk
[  137s] checking whether make sets $(MAKE)... yes
[  137s] checking for style of include used by make... GNU
[  137s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3
[  137s] checking build system type... armv7l-tizen-linux-gnueabi
[  137s] checking host system type... armv7l-tizen-linux-gnueabi
[  137s] checking for a sed that does not truncate output... /bin/sed
[  137s] checking for fgrep... /bin/grep -F
[  137s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld
[  137s] checking if the linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld) is GNU ld... yes
[  137s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
[  137s] checking the name lister (/usr/bin/nm -B) interface... BSD nm
[  137s] checking whether ln -s works... yes
[  137s] checking the maximum length of command line arguments... 1572864
[  137s] checking whether the shell understands some XSI constructs... yes
[  137s] checking whether the shell understands "+="... yes
[  137s] checking for /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld option to reload object files... -r
[  137s] checking for armv7l-tizen-linux-gnueabi-objdump... no
[  137s] checking for objdump... objdump
[  137s] checking how to recognize dependent libraries... pass_all
[  137s] checking for armv7l-tizen-linux-gnueabi-ar... no
[  137s] checking for ar... ar
[  137s] checking for armv7l-tizen-linux-gnueabi-strip... no
[  137s] checking for strip... strip
[  137s] checking for armv7l-tizen-linux-gnueabi-ranlib... no
[  137s] checking for ranlib... ranlib
[  137s] checking command to parse /usr/bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok
[  137s] checking for dlfcn.h... yes
[  137s] checking for objdir... .libs
[  138s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no
[  138s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC
[  138s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes
[  138s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no
[  138s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes
[  138s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes
[  138s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld) supports shared libraries... yes
[  138s] checking whether -lc should be explicitly linked in... no
[  138s] checking dynamic linker characteristics... GNU/Linux ld.so
[  138s] checking how to hardcode library paths into programs... immediate
[  138s] checking whether stripping libraries is possible... yes
[  138s] checking if libtool supports shared libraries... yes
[  138s] checking whether to build shared libraries... yes
[  138s] checking whether to build static libraries... no
[  138s] checking for armv7l-tizen-linux-gnueabi-gcc... (cached) armv7l-tizen-linux-gnueabi-gcc
[  138s] checking whether we are using the GNU C compiler... (cached) yes
[  138s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... (cached) yes
[  138s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... (cached) none needed
[  138s] checking for ANSI C header files... (cached) yes
[  138s] checking for special C compiler options needed for large files... no
[  138s] checking for _FILE_OFFSET_BITS value needed for large files... 64
[  139s] checking for size_t... yes
[  139s] checking for working alloca.h... yes
[  139s] checking for alloca... yes
[  139s] checking for armv7l-tizen-linux-gnueabi-pkg-config... no
[  139s] checking for pkg-config... /usr/bin/pkg-config
[  139s] checking pkg-config is at least version 0.9.0... yes
[  139s] checking for clock_gettime... yes
[  139s] checking for LIBDRI2... yes
[  139s] checking for X11... yes
[  139s] checking for CAPI... yes
[  139s] checking for LIBDRM... yes
[  139s] checking for PTHREADSTUBS... yes
[  139s] configure: creating ./config.status
[  139s] config.status: creating src/Makefile
[  139s] config.status: creating Makefile
[  139s] config.status: creating libtbm.pc
[  139s] config.status: creating config.h
[  139s] config.status: executing depfiles commands
[  140s] config.status: executing libtool commands
[  140s] 
[  140s] CFLAGS            : -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -Wall -Werror
[  140s] LDFLAGS           :  -Wl,--hash-style=both -Wl,--as-needed
[  140s] LIBTBM_CFLAGS     : -I/usr/include/dri2     -I/usr/include/libdrm -I/usr/include/exynos      
[  140s] LIBTBM_LIBS       : -ldri2   -lX11  -ldri2   -lX11   -ldrm     -lcapi-base-common  
[  140s] BUFMGR_MODULE_DIR : /usr/lib/bufmgr
[  140s] TBM_PLATFORM      : X11
[  140s] 
[  140s] + make -j4
[  140s] make  all-recursive
[  140s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libtbm-1.1.8'
[  140s] Making all in src
[  140s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libtbm-1.1.8/src'
[  140s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/libtbm-1.1.8/src'
[  140s]   CC     tbm_x11.lo
[  140s]   CC     tbm_surface.lo
[  140s]   CC     tbm_surface_internal.lo
[  140s]   CC     tbm_bufmgr_backend.lo
[  140s]   CC     tbm_bufmgr.lo
[  140s]   CCLD   libtbm.la
[  140s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/libtbm-1.1.8/src'
[  140s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libtbm-1.1.8/src'
[  140s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libtbm-1.1.8'
[  140s] make[2]: Nothing to be done for `all-am'.
[  140s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libtbm-1.1.8'
[  140s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libtbm-1.1.8'
[  140s] + exit 0
[  140s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.P2YTY2
[  140s] + umask 022
[  140s] + cd /home/abuild/rpmbuild/BUILD
[  140s] + cd libtbm-1.1.8
[  140s] + LANG=C
[  140s] + export LANG
[  140s] + unset DISPLAY
[  140s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libtbm-1.1.8-1.1.arm
[  140s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libtbm-1.1.8-1.1.arm
[  140s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libtbm-1.1.8-1.1.arm
[  140s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libtbm-1.1.8-1.1.arm/usr/share/license
[  140s] + cp -af COPYING /home/abuild/rpmbuild/BUILDROOT/libtbm-1.1.8-1.1.arm/usr/share/license/libtbm
[  140s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libtbm-1.1.8-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/libtbm-1.1.8-1.1.arm install
[  140s] Making install in src
[  140s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libtbm-1.1.8/src'
[  140s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libtbm-1.1.8/src'
[  140s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/libtbm-1.1.8/src'
[  140s] make[3]: Nothing to be done for `install-exec-am'.
[  140s] test -z "/usr/lib" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libtbm-1.1.8-1.1.arm/usr/lib"
[  140s]  /bin/sh ../libtool   --mode=install /usr/bin/install -c   libtbm.la '/home/abuild/rpmbuild/BUILDROOT/libtbm-1.1.8-1.1.arm/usr/lib'
[  140s] libtool: install: /usr/bin/install -c .libs/libtbm.so.1.0.0 /home/abuild/rpmbuild/BUILDROOT/libtbm-1.1.8-1.1.arm/usr/lib/libtbm.so.1.0.0
[  140s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libtbm-1.1.8-1.1.arm/usr/lib && { ln -s -f libtbm.so.1.0.0 libtbm.so.1 || { rm -f libtbm.so.1 && ln -s libtbm.so.1.0.0 libtbm.so.1; }; })
[  141s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libtbm-1.1.8-1.1.arm/usr/lib && { ln -s -f libtbm.so.1.0.0 libtbm.so || { rm -f libtbm.so && ln -s libtbm.so.1.0.0 libtbm.so; }; })
[  141s] libtool: install: /usr/bin/install -c .libs/libtbm.lai /home/abuild/rpmbuild/BUILDROOT/libtbm-1.1.8-1.1.arm/usr/lib/libtbm.la
[  141s] libtool: install: warning: remember to run `libtool --finish /usr/lib'
[  141s] test -z "/usr/include" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libtbm-1.1.8-1.1.arm/usr/include"
[  141s]  /usr/bin/install -c -m 644 tbm_bufmgr.h tbm_surface.h tbm_bufmgr_backend.h tbm_type.h tbm_surface_internal.h '/home/abuild/rpmbuild/BUILDROOT/libtbm-1.1.8-1.1.arm/usr/include'
[  141s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/libtbm-1.1.8/src'
[  141s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libtbm-1.1.8/src'
[  141s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libtbm-1.1.8/src'
[  141s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libtbm-1.1.8'
[  141s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libtbm-1.1.8'
[  141s] make[2]: Nothing to be done for `install-exec-am'.
[  141s] test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libtbm-1.1.8-1.1.arm/usr/lib/pkgconfig"
[  141s]  /usr/bin/install -c -m 644 libtbm.pc '/home/abuild/rpmbuild/BUILDROOT/libtbm-1.1.8-1.1.arm/usr/lib/pkgconfig'
[  141s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libtbm-1.1.8'
[  141s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libtbm-1.1.8'
[  141s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libtbm-1.1.8-1.1.arm/usr/share/info/dir
[  141s] + xargs rm -f --
[  141s] + find /home/abuild/rpmbuild/BUILDROOT/libtbm-1.1.8-1.1.arm -regex '.*\.la$'
[  141s] + find /home/abuild/rpmbuild/BUILDROOT/libtbm-1.1.8-1.1.arm -regex '.*\.a$'
[  141s] + xargs rm -f --
[  141s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/libtbm-1.1.8
[  141s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libtbm-1.1.8-1.1.arm/usr/lib/libtbm.so.1.0.0
[  141s] symlinked /usr/lib/debug/usr/lib/libtbm.so.1.0.0.debug to /usr/lib/debug/usr/lib/libtbm.so.debug
[  141s] symlinked /usr/lib/debug/usr/lib/libtbm.so.1.0.0.debug to /usr/lib/debug/usr/lib/libtbm.so.1.debug
[  141s] 323 blocks
[  141s] + /usr/lib/rpm/check-buildroot
[  141s] + /usr/lib/rpm//brp-compress
[  141s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip
[  141s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump
[  141s] + /usr/lib/rpm/brp-python-hardlink
[  141s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libtbm-1.1.8-1.1.arm
[  141s] Processing files: libtbm-1.1.8-1.1.armv7l
[  141s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl
[  141s] cXVlc3Q+CjwvbWFuaWZlc3Q+Cg==
[  141s] 
[  141s] Provides: libtbm.so.1
[  141s] Requires(interp): /sbin/ldconfig /sbin/ldconfig
[  141s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
[  141s] Requires(post): /sbin/ldconfig
[  141s] Requires(postun): /sbin/ldconfig
[  141s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libX11.so.6 libc.so.6 libc.so.6(GLIBC_2.4) libcapi-base-common.so.0 libdl.so.2 libdl.so.2(GLIBC_2.4) libdri2.so.0 libdrm.so.2 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5)
[  141s] Processing files: libtbm-debuginfo-1.1.8-1.1.armv7l
[  141s] Processing files: libtbm-debugsource-1.1.8-1.1.armv7l
[  141s] Processing files: libtbm-devel-1.1.8-1.1.armv7l
[  141s] Provides: pkgconfig(libtbm) = 1.1.0
[  141s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
[  141s] Requires: /usr/bin/pkg-config libtbm.so.1 pkgconfig(capi-base-common)
[  141s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libtbm-1.1.8-1.1.arm
[  141s] Wrote: /home/abuild/rpmbuild/SRPMS/libtbm-1.1.8-1.1.src.rpm
[  141s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libtbm-1.1.8-1.1.armv7l.rpm
[  141s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libtbm-debuginfo-1.1.8-1.1.armv7l.rpm
[  141s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libtbm-debugsource-1.1.8-1.1.armv7l.rpm
[  141s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libtbm-devel-1.1.8-1.1.armv7l.rpm
[  141s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.rSPrzk
[  141s] + umask 022
[  141s] + cd /home/abuild/rpmbuild/BUILD
[  141s] + cd libtbm-1.1.8
[  141s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libtbm-1.1.8-1.1.arm
[  141s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libtbm-1.1.8-1.1.arm
[  141s] + exit 0
[  141s] ... checking for files with abuild user/group
[  141s] ... creating baselibs
[  141s] ... saving built statistics
[  141s] ... saving built packages
[  141s] /home/abuild/rpmbuild/RPMS/armv7l/libtbm-1.1.8-1.1.armv7l.rpm
[  141s] /home/abuild/rpmbuild/RPMS/armv7l/libtbm-debuginfo-1.1.8-1.1.armv7l.rpm
[  141s] /home/abuild/rpmbuild/RPMS/armv7l/libtbm-debugsource-1.1.8-1.1.armv7l.rpm
[  141s] /home/abuild/rpmbuild/RPMS/armv7l/libtbm-devel-1.1.8-1.1.armv7l.rpm
[  141s] /home/abuild/rpmbuild/SRPMS/libtbm-1.1.8-1.1.src.rpm
[  141s] /home/abuild/rpmbuild/OTHER/_statistics
[  142s] 
[  142s] w29 finished "build libtbm.spec" at Thu Oct 29 05:12:09 UTC 2015.
[  142s] 
[  144s] /.build/build: line 368:   206 Killed                  background_monitor_process
[  146s] [  129.600172] SysRq : Power Off
[  146s] [  129.912387] Power down.
[  147s] build: extracting built packages...
[  147s] libtbm-1.1.8-1.1.armv7l.rpm
[  147s] libtbm-debuginfo-1.1.8-1.1.armv7l.rpm
[  147s] libtbm-debugsource-1.1.8-1.1.armv7l.rpm
[  147s] libtbm-devel-1.1.8-1.1.armv7l.rpm
[  147s] libtbm-1.1.8-1.1.src.rpm
[  147s] _statistics