[ 0s] Using BUILD_ROOT=/srv/build/root_6/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_6/root [ 0s] [ 0s] [ 0s] w12 started "build _service:gbs:ragel.spec" at Thu Oct 29 04:44:56 UTC 2015. [ 0s] [ 0s] Building ragel for project 'Tizen:2.4:Mobile' repository 'target-TM1' arch 'armv7l' srcmd5 '76c5ff247d63dbfe0c747806d19c342c' [ 0s] [ 0s] processing specfile /srv/build/root_6/.build-srcdir/_service:gbs:ragel.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_6/.build-srcdir/_service:gbs:ragel.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/6/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_6/.build.rpmlist /srv/build/root_6/.build-srcdir/_service:gbs:ragel.spec build rpmlint-Factory ... [ 1s] registering binfmt handlers for VM [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 1s] [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: glibc -> glibc-common -> bash [ 1s] breaking dependency glibc-common -> bash [ 1s] cycle: glibc -> glibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: glibc -> glibc-common -> coreutils [ 1s] breaking dependency coreutils -> glibc [ 1s] cycle: glibc -> glibc-common -> coreutils -> libacl [ 1s] breaking dependency libacl -> glibc [ 1s] cycle: glibc -> glibc-common -> coreutils -> libacl -> libattr [ 1s] breaking dependency libattr -> glibc [ 1s] cycle: libgcc -> glibc -> glibc-common -> coreutils -> libacl -> libattr [ 1s] breaking dependency libacl -> libattr [ 1s] cycle: libgcc -> glibc -> glibc-common -> coreutils -> libacl [ 1s] breaking dependency glibc-common -> coreutils [ 1s] cycle: glibc -> glibc-common [ 1s] breaking dependency glibc -> glibc-common [ 1s] cycle: libgcc -> glibc [ 1s] breaking dependency libgcc -> glibc [ 1s] cycle: rpm-libs -> rpm [ 1s] breaking dependency rpm-libs -> rpm [ 1s] [1/52] preinstalling tizen-release... [ 1s] [2/52] preinstalling libgcc... [ 1s] [3/52] preinstalling setup... [ 1s] [4/52] preinstalling filesystem... [ 1s] [5/52] preinstalling glibc... [ 1s] [6/52] preinstalling libattr... [ 1s] [7/52] preinstalling libacl... [ 1s] [8/52] preinstalling bash... [ 1s] [9/52] preinstalling bzip2-libs... [ 1s] [10/52] preinstalling diffutils... [ 1s] [11/52] preinstalling elfutils-libelf... [ 1s] [12/52] preinstalling libcap... [ 1s] [13/52] preinstalling liblua... [ 1s] [14/52] preinstalling libstdc++... [ 1s] [15/52] preinstalling ncurses-libs... [ 1s] [16/52] preinstalling nspr... [ 2s] [17/52] preinstalling nss-softokn-freebl... [ 2s] [18/52] preinstalling popt... [ 2s] [19/52] preinstalling readline... [ 2s] [20/52] preinstalling sed... [ 2s] [21/52] preinstalling sqlite... [ 2s] [22/52] preinstalling xz-libs... [ 2s] [23/52] preinstalling zlib... [ 2s] [24/52] preinstalling glibc-common... [ 2s] [25/52] preinstalling tar... [ 2s] [26/52] preinstalling coreutils... [ 2s] [27/52] preinstalling qemu-linux-user-x86-arm... [ 2s] [28/52] preinstalling tizen-accelerator... [ 2s] [29/52] preinstalling libfile... [ 2s] [30/52] preinstalling bzip2... [ 2s] [31/52] preinstalling nss... [ 2s] [32/52] preinstalling bzip2-libs-x86-arm... [ 2s] [33/52] preinstalling elfutils-libelf-x86-arm... [ 2s] [34/52] preinstalling glibc-x86-arm... [ 2s] [35/52] preinstalling libacl-x86-arm... [ 2s] [36/52] preinstalling libattr-x86-arm... [ 2s] [37/52] preinstalling libcap-x86-arm... [ 2s] [38/52] preinstalling libgcc-x86-arm... [ 2s] [39/52] preinstalling liblua-x86-arm... [ 2s] [40/52] preinstalling ncurses-libs-x86-arm... [ 2s] [41/52] preinstalling nspr-x86-arm... [ 2s] [42/52] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [43/52] preinstalling nss-x86-arm... [ 2s] [44/52] preinstalling popt-x86-arm... [ 2s] [45/52] preinstalling sqlite-x86-arm... [ 2s] [46/52] preinstalling xz-libs-x86-arm... [ 2s] [47/52] preinstalling zlib-x86-arm... [ 2s] [48/52] preinstalling rpm-libs... [ 2s] [49/52] preinstalling bash-x86-arm... [ 2s] [50/52] preinstalling rpm-libs-x86-arm... [ 2s] [51/52] preinstalling rpm... [ 2s] [52/52] preinstalling rpm-x86-arm... [ 3s] [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl-libs -> perl [ 3s] [1/8] preinstalling e2fsprogs-libs... [ 3s] [2/8] preinstalling libpcre... [ 3s] [3/8] preinstalling libuuid... [ 3s] [4/8] preinstalling grep... [ 3s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 3s] copying packages... [ 4s] reordering...cycle: bash -> glibc -> glibc-common [ 4s] breaking dependency glibc-common -> bash [ 4s] cycle: bash -> glibc -> glibc-common -> coreutils [ 4s] breaking dependency glibc-common -> coreutils [ 4s] cycle: glibc -> glibc-common -> findutils [ 4s] breaking dependency glibc-common -> findutils [ 4s] cycle: glibc -> glibc-common [ 4s] breaking dependency glibc-common -> glibc [ 4s] cycle: glibc -> glibc-common -> grep [ 4s] breaking dependency grep -> glibc [ 4s] cycle: glibc -> glibc-common -> grep -> libgcc [ 4s] breaking dependency grep -> libgcc [ 4s] cycle: glibc -> glibc-common -> grep -> libpcre [ 4s] breaking dependency libpcre -> glibc [ 4s] cycle: glibc -> glibc-common -> grep -> libpcre -> libgcc [ 4s] breaking dependency libpcre -> libgcc [ 4s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++ [ 4s] breaking dependency libstdc++ -> glibc [ 4s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 4s] breaking dependency glibc -> glibc-common [ 4s] cycle: glibc -> libgcc [ 4s] breaking dependency libgcc -> glibc [ 4s] cycle: filesystem -> setup [ 4s] breaking dependency setup -> filesystem [ 4s] cycle: ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses [ 4s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses-base [ 4s] cycle: perl -> perl-libs [ 4s] breaking dependency perl -> perl-libs [ 4s] cycle: perl -> perl-IO-Compress-Zlib [ 4s] breaking dependency perl -> perl-IO-Compress-Zlib [ 4s] cycle: perl -> perl-IO-Compress-Base [ 4s] breaking dependency perl -> perl-IO-Compress-Base [ 4s] cycle: perl -> perl-Module-Pluggable [ 4s] breaking dependency perl -> perl-Module-Pluggable [ 4s] cycle: perl -> perl-Pod-Simple [ 4s] breaking dependency perl -> perl-Pod-Simple [ 4s] cycle: nss -> nss-sysinit [ 4s] breaking dependency nss -> nss-sysinit [ 4s] cycle: rpm-libs -> rpm [ 4s] breaking dependency rpm-libs -> rpm [ 4s] done [ 5s] booting kvm ... [ 5s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 8000 -drive file=/srv/build/root_6/root,if=virtio,cache=none -drive file=/srv/build/root_6/root,if=ide,index=0,cache=none -drive file=/srv/build/root_6/swap,if=virtio,cache=none -smp 4 [ 7s] [ 0.000000] tsc: Fast TSC calibration failed [ 8s] doing fast boot [ 8s] Creating device nodes with udev [ 9s] Waiting for device /dev/vda to appear: ok [ 9s] fsck from util-linux 2.21.2 [ 9s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 9s] /dev/vda: clean, 4678/2392064 files, 223932/9568256 blocks [ 9s] fsck succeeded. Mounting root device read-write. [ 9s] Mounting root /dev/vda [ 9s] mount -o rw -t ext4 /dev/vda /root [ 31s] replacing /etc/mtab with symlink to /proc/self/mounts [ 36s] /.build/qemu-reg: line 9: interpreter '/usr/bin/qemu-armeb-binfmt' not found, ignoring [ 36s] /.build/qemu-reg: line 10: interpreter '/usr/bin/qemu-ppc-binfmt' not found, ignoring [ 36s] /.build/qemu-reg: line 11: interpreter '/usr/bin/qemu-mips-binfmt' not found, ignoring [ 36s] /.build/qemu-reg: line 12: interpreter '/usr/bin/qemu-mipsel-binfmt' not found, ignoring [ 36s] /.build/qemu-reg: line 18: interpreter '/usr/bin/qemu-sh4-binfmt' not found, ignoring [ 36s] /.build/qemu-reg: line 19: interpreter '/usr/bin/qemu-sh4eb-binfmt' not found, ignoring [ 53s] 2nd stage started in virtual machine [ 53s] machine type: armv7l [ 57s] swapon on /dev/vdb [ 58s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 58s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 60s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 63s] logging output to //.build.log... [ 65s] processing specfile /.build-srcdir/_service:gbs:ragel.spec ... [ 66s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:ragel.spec build rpmlint-Factory ... [ 87s] running rpm-x86-arm postinstall script [ 89s] running rpm-libs-x86-arm postinstall script [ 90s] running tizen-accelerator postinstall script [ 93s] running glibc-x86-arm postinstall script [ 94s] running bash-x86-arm postinstall script [ 94s] initializing rpm db... [ 107s] [1/169] cumulate cross-armv7l-platformfile-0.0.1-1.1 [ 107s] [2/169] cumulate kernel-headers-3.4.91-1.1 [ 107s] [3/169] cumulate tizen-release-2.2.0-1.1 [ 108s] [4/169] cumulate tzdata-2014j-1.1 [ 108s] [5/169] cumulate libgcc-4.9.2-2015.02.1.11 [ 108s] [6/169] cumulate setup-0.2-1.1 [ 109s] [7/169] cumulate filesystem-0.1-1.1 [ 111s] [8/169] cumulate glibc-2.20-2014.11.1.10 [ 111s] [9/169] cumulate libstdc++-4.9.2-2015.02.1.11 [ 111s] [10/169] cumulate libatomic-4.9.2-2015.02.1.11 [ 112s] [11/169] cumulate libgomp-4.9.2-2015.02.1.11 [ 112s] [12/169] cumulate openssl-1.0.1p-1.5 [ 112s] [13/169] cumulate bash-4.1-1.6 [ 112s] [14/169] cumulate bzip2-libs-1.0.5-1.8 [ 112s] [15/169] cumulate cpio-2.8-1.6 [ 113s] [16/169] cumulate db4-4.8.30-1.8 [ 113s] [17/169] cumulate diffutils-3.0-1.6 [ 113s] [18/169] cumulate e2fsprogs-libs-1.41.9-1.4 [ 113s] [19/169] cumulate elfutils-libelf-0.152-1.12 [ 113s] [20/169] cumulate expat-2.0.1-1.8 [ 113s] [21/169] cumulate fdupes-1.40-1.5 [ 114s] [22/169] cumulate findutils-4.2.31-1.5 [ 115s] [23/169] cumulate gdbm-1.8.3-1.12 [ 115s] [24/169] cumulate libattr-2.4.44-1.8 [ 115s] [25/169] cumulate libitm-4.9.2-2015.02.1.11 [ 115s] [26/169] cumulate liblua-5.1.4-1.6 [ 116s] [27/169] cumulate libuuid-2.20.2-1.4 [ 116s] [28/169] cumulate m4-1.4.14-1.5 [ 116s] [29/169] cumulate net-tools-1.60-2.6 [ 116s] [30/169] cumulate nspr-4.9-1.9 [ 116s] [31/169] cumulate nss-softokn-freebl-3.12.9-1.17 [ 116s] [32/169] cumulate patch-2.6-1.6 [ 116s] [33/169] cumulate pkg-config-0.25-2.6 [ 116s] [34/169] cumulate popt-1.16-1.8 [ 117s] [35/169] cumulate readline-5.2-1.6 [ 117s] [36/169] cumulate ruby-1.9.2-1.6 [ 117s] [37/169] cumulate sed-4.1.5-1.5 [ 117s] [38/169] cumulate sqlite-3.8.10.2-1.8 [ 117s] [39/169] cumulate xz-libs-5.0.3-1.8 [ 117s] [40/169] cumulate zlib-1.2.8-1.8 [ 118s] [41/169] cumulate libasan-4.9.2-2015.02.1.11 [ 118s] [42/169] cumulate libpcre-7.7-1.25 [ 118s] [43/169] cumulate libubsan-4.9.2-2015.02.1.11 [ 118s] [44/169] cumulate patchelf-0.5.svn20809-1.5 [ 118s] [45/169] cumulate ncurses-libs-5.7-1.8 [ 118s] [46/169] cumulate build-compare-2009.10.14-1.6 [ 119s] [47/169] cumulate qemu-linux-user-x86-arm-2.2.0-4.1.1 [ 119s] [48/169] cumulate cpp-4.9.2-2015.02.1.11 [ 119s] [49/169] cumulate glibc-headers-2.20-2014.11.1.10 [ 120s] [50/169] cumulate libcap-2.21-1.6 [ 120s] [51/169] cumulate unzip-6.0-1.12 [ 120s] [52/169] cumulate grep-2.5.1a-1.5 [ 120s] [53/169] cumulate libacl-2.2.49-1.5 [ 121s] [54/169] cumulate libfile-5.04-1.7 [ 122s] [55/169] cumulate libpython-2.7.1-1.5 [ 123s] [56/169] cumulate libxml2-2.9.2-1.3 [ 123s] [57/169] cumulate make-3.82-154.1.6 [ 123s] [58/169] cumulate ncurses-5.7-1.8 [ 123s] [59/169] cumulate pcre-7.7-1.25 [ 123s] [60/169] cumulate psmisc-22.20-1.6 [ 124s] [61/169] cumulate binutils-2.25.0-2015.01.1.8 [ 125s] [62/169] cumulate bzip2-1.0.5-1.8 [ 125s] [63/169] cumulate libblkid-2.20.2-1.4 [ 126s] [64/169] cumulate xz-5.0.3-1.8 [ 126s] [65/169] cumulate elfutils-libs-0.152-1.12 [ 126s] [66/169] cumulate nss-3.12.9-1.17 [ 126s] [67/169] cumulate perl-5.12.1-1.25 [ 127s] [68/169] cumulate ncurses-base-5.7-1.8 [ 127s] [69/169] cumulate perl-HTML-Tagset-3.20-1.1 [ 127s] [70/169] cumulate perl-IO-Compress-Base-2.008-1.25 [ 127s] [71/169] cumulate perl-Module-Pluggable-3.60-1.25 [ 128s] [72/169] cumulate perl-Pod-Escapes-1.04-1.25 [ 128s] [73/169] cumulate perl-TimeDate-1.20-1.1 [ 128s] [74/169] cumulate perl-URI-1.54-1.1 [ 128s] [75/169] cumulate glibc-devel-2.20-2014.11.1.10 [ 128s] [76/169] cumulate file-5.04-1.7 [ 129s] [77/169] cumulate libxslt-1.1.28-1.2 [ 129s] [78/169] cumulate perl-Compress-Raw-Zlib-2.008-1.25 [ 129s] [79/169] cumulate perl-libs-5.12.1-1.25 [ 129s] [80/169] cumulate tar-1.17-1.6 [ 129s] [81/169] cumulate coreutils-6.9-1.6 [ 129s] [82/169] cumulate libmount-2.20.2-1.4 [ 129s] [83/169] cumulate xz-lzma-compat-5.0.3-1.8 [ 130s] [84/169] cumulate elfutils-0.152-1.12 [ 130s] [85/169] cumulate nss-sysinit-3.12.9-1.17 [ 131s] [86/169] cumulate python-base-2.7.1-1.5 [ 131s] [87/169] cumulate glibc-common-2.20-2014.11.1.10 [ 131s] [88/169] cumulate libarchive-2.8.3-1.2 [ 131s] [89/169] cumulate rpm-libs-4.9.1-4.3.1.10 [ 132s] [90/169] cumulate libstdc++-devel-4.9.2-2015.02.1.11 [ 132s] [91/169] cumulate perl-Pod-Simple-3.07-1.25 [ 132s] [92/169] cumulate tizen-accelerator-1.0.1-1.1 [ 132s] [93/169] cumulate perl-IO-Compress-Zlib-2.008-1.25 [ 132s] [94/169] cumulate gawk-3.1.5-1.6 [ 132s] [95/169] cumulate gzip-1.3.12-1.6 [ 132s] [96/169] cumulate perl-HTML-Parser-3.65-1.5 [ 132s] [97/169] cumulate python-xml-2.7.1-1.5 [ 133s] [98/169] cumulate autoconf-2.68-1.1 [ 133s] [99/169] cumulate build-2011.01.10a-1.1 [ 133s] [100/169] installing rpm-4.9.1-4.3.1.10 [ 137s] [101/169] cumulate python-lxml-2.2.3-1.2 [ 138s] [102/169] cumulate util-linux-2.20.2-1.4 [ 138s] [103/169] cumulate cmake-2.8.5-1.1.2 [ 138s] [104/169] cumulate python-2.7.1-1.3 [ 139s] [105/169] cumulate gcc-4.9.2-2015.02.1.11 [ 139s] [106/169] cumulate automake-1.11.1-1.1 [ 139s] [107/169] cumulate bzip2-libs-x86-arm-1.0.5-9.1.4 [ 139s] [108/169] cumulate elfutils-libelf-x86-arm-0.152-9.1.4 [ 139s] [109/169] cumulate elfutils-libs-x86-arm-0.152-9.1.4 [ 140s] [110/169] cumulate expat-x86-arm-2.0.1-1.4 [ 141s] [111/169] cumulate glibc-x86-arm-2.20-9.1.5 [ 143s] [112/169] cumulate libacl-x86-arm-2.2.49-9.1.4 [ 144s] [113/169] cumulate libarchive-x86-arm-2.8.3-1.3 [ 144s] [114/169] cumulate libattr-x86-arm-2.4.44-9.1.4 [ 145s] [115/169] cumulate libcap-x86-arm-2.21-9.1.4 [ 145s] [116/169] cumulate libfile-x86-arm-5.04-9.1.4 [ 145s] [117/169] cumulate libgcc-x86-arm-4.9.2-9.1.4 [ 145s] [118/169] cumulate liblua-x86-arm-5.1.4-9.1.3 [ 145s] [119/169] cumulate libpython-x86-arm-2.7.1-9.1.3 [ 147s] [120/169] cumulate libstdc++-x86-arm-4.9.2-9.1.4 [ 147s] [121/169] cumulate libxml2-x86-arm-2.9.2-9.1.3 [ 147s] [122/169] cumulate libxslt-x86-arm-1.1.28-9.1.3 [ 147s] [123/169] cumulate ncurses-libs-x86-arm-5.7-9.1.3 [ 147s] [124/169] cumulate nspr-x86-arm-4.9-9.1.5 [ 147s] [125/169] cumulate nss-softokn-freebl-x86-arm-3.12.9-9.1.5 [ 147s] [126/169] cumulate nss-x86-arm-3.12.9-9.1.5 [ 147s] [127/169] cumulate openssl-x86-arm-1.0.1p-9.1.3 [ 148s] [128/169] cumulate perl-libs-x86-arm-5.12.1-9.1.5 [ 148s] [129/169] cumulate popt-x86-arm-1.16-9.1.4 [ 149s] [130/169] cumulate python-lxml-x86-arm-2.2.3-9.1.3 [ 149s] [131/169] cumulate python-x86-arm-2.7.1-9.1.3 [ 149s] [132/169] cumulate python-xml-x86-arm-2.7.1-9.1.3 [ 149s] [133/169] cumulate rpm-libs-x86-arm-4.9.1-9.1.4 [ 149s] [134/169] cumulate sqlite-x86-arm-3.8.10.2-9.1.3 [ 150s] [135/169] cumulate xz-libs-x86-arm-5.0.3-9.1.4 [ 150s] [136/169] cumulate zlib-x86-arm-1.2.8-9.1.4 [ 150s] [137/169] cumulate gcc-c++-4.9.2-2015.02.1.11 [ 150s] [138/169] cumulate perl-Compress-Zlib-2.008-1.25 [ 150s] [139/169] cumulate rpm-build-4.9.1-4.3.1.10 [ 150s] [140/169] cumulate bash-x86-arm-4.1-9.1.4 [ 150s] [141/169] cumulate diffutils-x86-arm-3.0-9.1.4 [ 151s] [142/169] cumulate fdupes-x86-arm-1.40-9.1.4 [ 151s] [143/169] cumulate findutils-x86-arm-4.2.31-9.1.4 [ 151s] [144/169] cumulate gawk-x86-arm-3.1.5-9.1.3 [ 151s] [145/169] cumulate gzip-x86-arm-1.3.12-9.1.4 [ 152s] [146/169] cumulate libtool-2.2.6b-1.8 [ 152s] [147/169] cumulate m4-x86-arm-1.4.14-9.1.4 [ 152s] [148/169] cumulate make-x86-arm-3.82-9.1.3 [ 152s] [149/169] cumulate patch-x86-arm-2.6-9.1.4 [ 152s] [150/169] cumulate perl-libwww-perl-5.836-1.1 [ 153s] [151/169] cumulate pkg-config-x86-arm-0.25-9.1.4 [ 153s] [152/169] cumulate ruby-x86-arm-1.9.2-9.1.4 [ 153s] [153/169] cumulate sed-x86-arm-4.1.5-9.1.4 [ 153s] [154/169] cumulate bzip2-x86-arm-1.0.5-1.4 [ 153s] [155/169] cumulate perl-x86-arm-5.12.1-9.1.5 [ 153s] [156/169] cumulate python-base-x86-arm-2.7.1-9.1.3 [ 153s] [157/169] cumulate coreutils-x86-arm-6.9-9.1.4 [ 153s] [158/169] cumulate cross-armv7l-gcc-accel-x86-armv7l-4.9.2-2015.02.1.6 [ 153s] [159/169] cumulate file-x86-arm-5.04-9.1.4 [ 153s] [160/169] cumulate tar-x86-arm-1.17-9.1.4 [ 154s] [161/169] cumulate elfutils-x86-arm-0.152-9.1.4 [ 154s] [162/169] cumulate cmake-x86-arm-2.8.5-1.3 [ 154s] [163/169] cumulate rpm-x86-arm-4.9.1-9.1.4 [ 154s] [164/169] cumulate rpm-build-x86-arm-4.9.1-9.1.4 [ 154s] [165/169] cumulate perl-HTML-Parser-x86-arm-3.65-9.1.3 [ 154s] [166/169] cumulate cross-armv7l-binutils-accel-x86-armv7l-2.25.0-2015.01.1.3 [ 154s] [167/169] cumulate perl-XML-Parser-2.36-1.6 [ 154s] [168/169] cumulate perl-XML-Parser-x86-arm-2.36-9.1.3 [ 154s] [169/169] now installing cumulated packages [ 158s] Preparing... ################################################## [ 159s] setup ################################################## [ 161s] filesystem ################################################## [ 162s] tzdata ################################################## [ 162s] tizen-release ################################################## [ 162s] kernel-headers ################################################## [ 162s] cross-armv7l-platformfile ################################################## [ 162s] bash ################################################## [ 162s] findutils ################################################## [ 163s] grep ################################################## [ 164s] coreutils ################################################## [ 169s] glibc-common ################################################## [ 170s] libgcc ################################################## [ 170s] /sbin/ldconfig: relative path `1' used to build cache [ 170s] warning: %post(libgcc-4.9.2-2015.02.1.11.armv7l) scriptlet failed, exit status 1 [ 171s] glibc ################################################## [ 171s] libstdc++ ################################################## [ 171s] libattr ################################################## [ 171s] libacl ################################################## [ 171s] libpcre ################################################## [ 171s] tizen-accelerator ################################################## [ 173s] glibc-x86-arm ################################################## [ 174s] libattr-x86-arm ################################################## [ 175s] libacl-x86-arm ################################################## [ 175s] libgcc-x86-arm ################################################## [ 175s] libstdc++-x86-arm ################################################## [ 176s] glibc-headers ################################################## [ 176s] glibc-devel ################################################## [ 176s] libstdc++-devel ################################################## [ 176s] coreutils-x86-arm ################################################## [ 179s] bash-x86-arm ################################################## [ 179s] findutils-x86-arm ################################################## [ 179s] build-compare ################################################## [ 181s] qemu-linux-user-x86-arm ################################################## [ 182s] zlib ################################################## [ 182s] zlib-x86-arm ################################################## [ 182s] bzip2-libs ################################################## [ 182s] bzip2-libs-x86-arm ################################################## [ 182s] elfutils-libelf ################################################## [ 182s] xz-libs ################################################## [ 183s] ncurses-libs ################################################## [ 183s] ncurses ################################################## [ 183s] ncurses-base ################################################## [ 183s] libpython ################################################## [ 184s] python-base ################################################## [ 184s] libxml2 ################################################## [ 185s] binutils ################################################## [ 185s] xz-libs-x86-arm ################################################## [ 186s] elfutils-libelf-x86-arm ################################################## [ 187s] libfile ################################################## [ 187s] openssl ################################################## [ 187s] expat ################################################## [ 187s] libuuid ################################################## [ 187s] nspr ################################################## [ 188s] popt ################################################## [ 188s] sed ################################################## [ 188s] sqlite ################################################## [ 188s] popt-x86-arm ################################################## [ 189s] nspr-x86-arm ################################################## [ 189s] libfile-x86-arm ################################################## [ 189s] libblkid ################################################## [ 189s] libarchive ################################################## [ 189s] file ################################################## [ 189s] libxslt ################################################## [ 189s] xz ################################################## [ 189s] elfutils-libs ################################################## [ 190s] elfutils ################################################## [ 190s] bzip2 ################################################## [ 190s] tar ################################################## [ 190s] libcap ################################################## [ 190s] libcap-x86-arm ################################################## [ 191s] diffutils ################################################## [ 192s] liblua ################################################## [ 193s] liblua-x86-arm ################################################## [ 194s] m4 ################################################## [ 194s] nss-softokn-freebl ################################################## [ 196s] nss ################################################## [ 196s] nss-sysinit ################################################## [ 198s] nss-x86-arm ################################################## [ 200s] rpm-libs ################################################## [ 201s] rpm-libs-x86-arm ################################################## [ 201s] patch ################################################## [ 201s] pkg-config ################################################## [ 202s] gawk ################################################## [ 202s] gzip ################################################## [ 202s] elfutils-libs-x86-arm ################################################## [ 202s] libarchive-x86-arm ################################################## [ 202s] openssl-x86-arm ################################################## [ 202s] libxml2-x86-arm ################################################## [ 202s] libpython-x86-arm ################################################## [ 202s] xz-lzma-compat ################################################## [ 202s] python-lxml ################################################## [ 203s] cmake ################################################## [ 204s] libmount ################################################## [ 204s] python-xml ################################################## [ 204s] cpp ################################################## [ 204s] libasan ################################################## [ 205s] libubsan ################################################## [ 205s] libatomic ################################################## [ 205s] libgomp ################################################## [ 205s] cpio ################################################## [ 205s] db4 ################################################## [ 205s] fdupes ################################################## [ 205s] gdbm ################################################## [ 205s] perl-Pod-Escapes ################################################## [ 205s] perl-Compress-Raw-Zlib ################################################## [ 206s] perl-IO-Compress-Base ################################################## [ 206s] perl-Module-Pluggable ################################################## [ 206s] perl-Pod-Simple ################################################## [ 207s] perl-IO-Compress-Zlib ################################################## [ 207s] perl-libs ################################################## [ 224s] perl ################################################## [ 224s] perl-URI ################################################## [ 224s] autoconf ################################################## [ 224s] automake ################################################## [ 224s] perl-HTML-Tagset ################################################## [ 224s] perl-TimeDate ################################################## [ 224s] perl-Compress-Zlib ################################################## [ 225s] perl-libs-x86-arm ################################################## [ 226s] perl-x86-arm ################################################## [ 227s] perl-HTML-Parser ################################################## [ 228s] perl-libwww-perl ################################################## [ 228s] perl-XML-Parser ################################################## [ 228s] libitm ################################################## [ 229s] gcc ################################################## [ 229s] gcc-c++ ################################################## [ 232s] cross-armv7l-gcc-accel-x86-a################################################## [ 232s] "GCCVER: 4.9 GCCVER_NEW: 4.9 " [ 232s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 233s] readline ################################################## [ 233s] python ################################################## [ 233s] ruby ################################################## [ 234s] unzip ################################################## [ 235s] rpm-build ################################################## [ 238s] make ################################################## [ 241s] make-x86-arm ################################################## [ 242s] rpm-build-x86-arm ################################################## [ 243s] ruby-x86-arm ################################################## [ 243s] python-x86-arm ################################################## [ 245s] cross-armv7l-binutils-accel-################################################## [ 245s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/addr2line': File exists [ 245s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ar': File exists [ 245s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/as': File exists [ 245s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/c++filt': File exists [ 245s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/elfedit': File exists [ 245s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/gprof': File exists [ 245s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld': File exists [ 245s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld.bfd': File exists [ 245s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld.gold': File exists [ 245s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/nm': File exists [ 245s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/objcopy': File exists [ 245s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/objdump': File exists [ 245s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ranlib': File exists [ 245s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/readelf': File exists [ 245s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/size': File exists [ 245s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/strings': File exists [ 245s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/strip': File exists [ 246s] perl-XML-Parser-x86-arm ################################################## [ 246s] perl-HTML-Parser-x86-arm ################################################## [ 246s] build ################################################## [ 246s] libtool ################################################## [ 246s] fdupes-x86-arm ################################################## [ 246s] python-xml-x86-arm ################################################## [ 247s] cmake-x86-arm ################################################## [ 247s] python-lxml-x86-arm ################################################## [ 248s] python-base-x86-arm ################################################## [ 249s] elfutils-x86-arm ################################################## [ 249s] gzip-x86-arm ################################################## [ 249s] gawk-x86-arm ################################################## [ 249s] pkg-config-x86-arm ################################################## [ 249s] patch-x86-arm ################################################## [ 252s] rpm-x86-arm ################################################## [ 252s] /bin/rpm.orig-arm already present - skipping. [ 252s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 252s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 252s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 252s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 252s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 252s] nss-softokn-freebl-x86-arm ################################################## [ 252s] m4-x86-arm ################################################## [ 252s] diffutils-x86-arm ################################################## [ 252s] tar-x86-arm ################################################## [ 252s] bzip2-x86-arm ################################################## [ 253s] libxslt-x86-arm ################################################## [ 253s] mv: cannot stat `/usr/bin/xsltproc': No such file or directory [ 253s] file-x86-arm ################################################## [ 253s] sqlite-x86-arm ################################################## [ 253s] sed-x86-arm ################################################## [ 253s] expat-x86-arm ################################################## [ 253s] ncurses-libs-x86-arm ################################################## [ 253s] util-linux ################################################## [ 253s] psmisc ################################################## [ 253s] pcre ################################################## [ 253s] patchelf ################################################## [ 253s] e2fsprogs-libs ################################################## [ 253s] net-tools ################################################## [ 254s] removing nis flags from //etc/nsswitch.conf... [ 254s] now finalizing build dir... [ 266s] build target is armv7l-tizen-linux [ 266s] ----------------------------------------------------------------- [ 266s] I have the following modifications for ragel.spec: [ 266s] 5c5 [ 266s] < Release: 1 [ 266s] --- [ 266s] > Release: %{?release_prefix:%{release_prefix}.}1.1 [ 267s] ----------------------------------------------------------------- [ 267s] ----- building ragel.spec (user abuild) [ 267s] ----------------------------------------------------------------- [ 267s] ----------------------------------------------------------------- [ 267s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:2.4:Mobile/target-TM1/76c5ff247d63dbfe0c747806d19c342c-ragel' /home/abuild/rpmbuild/SOURCES/ragel.spec [ 267s] Building target platforms: armv7l-tizen-linux [ 267s] Building for target armv7l-tizen-linux [ 267s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.j2n0UC [ 267s] + umask 022 [ 267s] + cd /home/abuild/rpmbuild/BUILD [ 267s] + cd /home/abuild/rpmbuild/BUILD [ 267s] + rm -rf ragel-6.8 [ 267s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/ragel-6.8.tar.gz [ 267s] + /bin/tar -xf - [ 267s] + STATUS=0 [ 267s] + '[' 0 -ne 0 ']' [ 267s] + cd ragel-6.8 [ 267s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 267s] + echo 'Patch #0 (no-doc.patch):' [ 267s] Patch #0 (no-doc.patch): [ 267s] + /bin/cat /home/abuild/rpmbuild/SOURCES/no-doc.patch [ 267s] + /usr/bin/patch -s -p1 --fuzz=2 [ 267s] + exit 0 [ 267s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.sWjk6y [ 267s] + umask 022 [ 267s] + cd /home/abuild/rpmbuild/BUILD [ 267s] + cd ragel-6.8 [ 267s] + LANG=C [ 267s] + export LANG [ 267s] + unset DISPLAY [ 267s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 267s] + export CFLAGS [ 267s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 267s] + export CXXFLAGS [ 267s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 267s] + export FFLAGS [ 267s] + LD_AS_NEEDED=1 [ 267s] + export LD_AS_NEEDED [ 267s] + ./autogen.sh [ 276s] configure.in:24: installing `./install-sh' [ 276s] configure.in:24: installing `./missing' [ 276s] examples/Makefile.am: installing `./depcomp' [ 277s] + ./configure --prefix=/usr [ 278s] checking for a BSD-compatible install... /usr/bin/install -c [ 279s] checking whether build environment is sane... yes [ 279s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 279s] checking for gawk... gawk [ 279s] checking whether make sets $(MAKE)... yes [ 279s] checking for ./DIST... yes [ 279s] checking for gcc... gcc [ 279s] checking whether the C compiler works... yes [ 279s] checking for C compiler default output file name... a.out [ 279s] checking for suffix of executables... [ 279s] checking whether we are cross compiling... no [ 279s] checking for suffix of object files... o [ 279s] checking whether we are using the GNU C compiler... yes [ 279s] checking whether gcc accepts -g... yes [ 279s] checking for gcc option to accept ISO C89... none needed [ 279s] checking for style of include used by make... GNU [ 279s] checking dependency style of gcc... gcc3 [ 279s] checking for g++... g++ [ 279s] checking whether we are using the GNU C++ compiler... yes [ 279s] checking whether g++ accepts -g... yes [ 279s] checking dependency style of g++... gcc3 [ 279s] checking for ar... ar [ 279s] checking for ranlib... ranlib [ 279s] checking whether make sets $(MAKE)... (cached) yes [ 279s] checking for gdc... no [ 279s] checking for the Objective-C compiler... no [ 279s] checking for javac... no [ 279s] checking for txl... no [ 279s] checking for ruby... ruby [ 279s] checking for gmcs... no [ 279s] configure: creating ./config.status [ 280s] config.status: creating Makefile [ 280s] config.status: creating ragel/Makefile [ 280s] config.status: creating aapl/Makefile [ 280s] config.status: creating doc/Makefile [ 280s] config.status: creating doc/ragel.1 [ 280s] config.status: creating contrib/Makefile [ 280s] config.status: creating test/Makefile [ 280s] config.status: creating test/runtests [ 280s] config.status: creating examples/Makefile [ 280s] config.status: creating ragel/config.h [ 280s] config.status: executing depfiles commands [ 280s] config.status: executing default commands [ 280s] configuration of ragel complete [ 280s] + make -j4 [ 280s] Making all in ragel [ 280s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/ragel-6.8/ragel' [ 280s] echo '#define VERSION "6.6"' > version.h [ 280s] echo '#define PUBDATE "Dec 2009"' >> version.h [ 280s] make all-am [ 280s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ragel-6.8/ragel' [ 280s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-main.o -MD -MP -MF .deps/ragel-main.Tpo -c -o ragel-main.o `test -f 'main.cpp' || echo './'`main.cpp [ 280s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-parsetree.o -MD -MP -MF .deps/ragel-parsetree.Tpo -c -o ragel-parsetree.o `test -f 'parsetree.cpp' || echo './'`parsetree.cpp [ 280s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-parsedata.o -MD -MP -MF .deps/ragel-parsedata.Tpo -c -o ragel-parsedata.o `test -f 'parsedata.cpp' || echo './'`parsedata.cpp [ 280s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-fsmstate.o -MD -MP -MF .deps/ragel-fsmstate.Tpo -c -o ragel-fsmstate.o `test -f 'fsmstate.cpp' || echo './'`fsmstate.cpp [ 280s] In file included from fsmstate.cpp:24:0: [ 280s] fsmgraph.h: In instantiation of 'void PairIter::findNext() [with ListItem1 = TransAp; ListItem2 = TransAp]': [ 280s] fsmgraph.h:854:11: required from 'PairIter::PairIter(ListItem1*, ListItem2*) [with ListItem1 = TransAp; ListItem2 = TransAp]' [ 280s] fsmstate.cpp:198:72: required from here [ 280s] fsmgraph.h:878:7: warning: variable 'backIn' set but not used [-Wunused-but-set-variable] [ 280s] bool backIn; [ 280s] ^ [ 280s] fsmgraph.h: In instantiation of 'void PairIter::findNext() [with ListItem1 = StateCond; ListItem2 = StateCond]': [ 280s] fsmgraph.h:854:11: required from 'PairIter::PairIter(ListItem1*, ListItem2*) [with ListItem1 = StateCond; ListItem2 = StateCond]' [ 280s] fsmstate.cpp:260:87: required from here [ 280s] fsmgraph.h:878:7: warning: variable 'backIn' set but not used [-Wunused-but-set-variable] [ 280s] In file included from parsedata.h:36:0, [ 280s] from rlparse.kh:27, [ 280s] from parsedata.cpp:29: [ 280s] parsetree.h: In constructor 'Expression::Expression(Expression*, Term*, Expression::Type)': [ 280s] parsetree.h:386:2: warning: 'Expression::builtin' is initialized with itself [-Winit-self] [ 280s] Expression( Expression *expression, Term *term, Type type ) : [ 280s] ^ [ 280s] parsetree.h: In constructor 'Expression::Expression(Term*)': [ 280s] parsetree.h:391:2: warning: 'Expression::builtin' is initialized with itself [-Winit-self] [ 280s] Expression( Term *term ) : [ 280s] ^ [ 280s] In file included from parsedata.h:36:0, [ 280s] from rlparse.kh:27, [ 280s] from parsetree.cpp:30: [ 280s] parsetree.h: In constructor 'Expression::Expression(Expression*, Term*, Expression::Type)': [ 280s] parsetree.h:386:2: warning: 'Expression::builtin' is initialized with itself [-Winit-self] [ 280s] Expression( Expression *expression, Term *term, Type type ) : [ 280s] ^ [ 280s] parsetree.h: In constructor 'Expression::Expression(Term*)': [ 280s] parsetree.h:391:2: warning: 'Expression::builtin' is initialized with itself [-Winit-self] [ 280s] Expression( Term *term ) : [ 280s] ^ [ 280s] In file included from parsedata.h:36:0, [ 280s] from rlparse.kh:27, [ 280s] from rlscan.h:28, [ 280s] from main.cpp:50: [ 280s] parsetree.h: In constructor 'Expression::Expression(Expression*, Term*, Expression::Type)': [ 280s] parsetree.h:386:2: warning: 'Expression::builtin' is initialized with itself [-Winit-self] [ 280s] Expression( Expression *expression, Term *term, Type type ) : [ 280s] ^ [ 280s] parsetree.h: In constructor 'Expression::Expression(Term*)': [ 280s] parsetree.h:391:2: warning: 'Expression::builtin' is initialized with itself [-Winit-self] [ 280s] Expression( Term *term ) : [ 280s] ^ [ 280s] parsetree.cpp: In constructor 'Join::Join(Expression*)': [ 280s] parsetree.cpp:585:1: warning: 'Join::loc' is initialized with itself [-Winit-self] [ 280s] Join::Join( Expression *expr ) [ 280s] ^ [ 281s] mv -f .deps/ragel-fsmstate.Tpo .deps/ragel-fsmstate.Po [ 281s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-fsmbase.o -MD -MP -MF .deps/ragel-fsmbase.Tpo -c -o ragel-fsmbase.o `test -f 'fsmbase.cpp' || echo './'`fsmbase.cpp [ 281s] mv -f .deps/ragel-main.Tpo .deps/ragel-main.Po [ 281s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-fsmattach.o -MD -MP -MF .deps/ragel-fsmattach.Tpo -c -o ragel-fsmattach.o `test -f 'fsmattach.cpp' || echo './'`fsmattach.cpp [ 281s] In file included from fsmattach.cpp:24:0: [ 281s] fsmgraph.h: In instantiation of 'void PairIter::findNext() [with ListItem1 = TransAp; ListItem2 = TransAp]': [ 281s] fsmgraph.h:854:11: required from 'PairIter::PairIter(ListItem1*, ListItem2*) [with ListItem1 = TransAp; ListItem2 = TransAp]' [ 281s] fsmattach.cpp:348:57: required from here [ 281s] fsmgraph.h:878:7: warning: variable 'backIn' set but not used [-Wunused-but-set-variable] [ 281s] bool backIn; [ 281s] ^ [ 282s] mv -f .deps/ragel-parsetree.Tpo .deps/ragel-parsetree.Po [ 282s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-fsmmin.o -MD -MP -MF .deps/ragel-fsmmin.Tpo -c -o ragel-fsmmin.o `test -f 'fsmmin.cpp' || echo './'`fsmmin.cpp [ 282s] mv -f .deps/ragel-parsedata.Tpo .deps/ragel-parsedata.Po [ 282s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-fsmgraph.o -MD -MP -MF .deps/ragel-fsmgraph.Tpo -c -o ragel-fsmgraph.o `test -f 'fsmgraph.cpp' || echo './'`fsmgraph.cpp [ 282s] In file included from parsedata.h:36:0, [ 282s] from fsmgraph.cpp:27: [ 282s] parsetree.h: In constructor 'Expression::Expression(Expression*, Term*, Expression::Type)': [ 282s] parsetree.h:386:2: warning: 'Expression::builtin' is initialized with itself [-Winit-self] [ 282s] Expression( Expression *expression, Term *term, Type type ) : [ 282s] ^ [ 282s] parsetree.h: In constructor 'Expression::Expression(Term*)': [ 282s] parsetree.h:391:2: warning: 'Expression::builtin' is initialized with itself [-Winit-self] [ 282s] Expression( Term *term ) : [ 282s] ^ [ 282s] In file included from fsmgraph.cpp:25:0: [ 282s] fsmgraph.h: In instantiation of 'void PairIter::findNext() [with ListItem1 = TransAp; ListItem2 = StateCond]': [ 282s] fsmgraph.h:854:11: required from 'PairIter::PairIter(ListItem1*, ListItem2*) [with ListItem1 = TransAp; ListItem2 = StateCond]' [ 282s] fsmgraph.cpp:933:33: required from here [ 282s] fsmgraph.h:878:7: warning: variable 'backIn' set but not used [-Wunused-but-set-variable] [ 282s] bool backIn; [ 282s] ^ [ 282s] fsmgraph.h: In instantiation of 'void PairIter::findNext() [with ListItem1 = TransAp; ListItem2 = TransAp]': [ 282s] fsmgraph.h:854:11: required from 'PairIter::PairIter(ListItem1*, ListItem2*) [with ListItem1 = TransAp; ListItem2 = TransAp]' [ 282s] fsmgraph.cpp:970:64: required from here [ 282s] fsmgraph.h:878:7: warning: variable 'backIn' set but not used [-Wunused-but-set-variable] [ 282s] fsmgraph.h: In instantiation of 'void PairIter::findNext() [with ListItem1 = StateCond; ListItem2 = StateCond]': [ 282s] fsmgraph.h:854:11: required from 'PairIter::PairIter(ListItem1*, ListItem2*) [with ListItem1 = StateCond; ListItem2 = StateCond]' [ 282s] fsmgraph.cpp:1001:33: required from here [ 282s] fsmgraph.h:878:7: warning: variable 'backIn' set but not used [-Wunused-but-set-variable] [ 282s] fsmgraph.h: In instantiation of 'void PairIter::findNext() [with ListItem1 = TransAp; ListItem2 = Removal]': [ 282s] fsmgraph.h:854:11: required from 'PairIter::PairIter(ListItem1*, ListItem2*) [with ListItem1 = TransAp; ListItem2 = Removal]' [ 282s] fsmgraph.cpp:1104:74: required from here [ 282s] fsmgraph.h:878:7: warning: variable 'backIn' set but not used [-Wunused-but-set-variable] [ 283s] mv -f .deps/ragel-fsmattach.Tpo .deps/ragel-fsmattach.Po [ 283s] mv -f .deps/ragel-fsmbase.Tpo .deps/ragel-fsmbase.Po [ 283s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-fsmap.o -MD -MP -MF .deps/ragel-fsmap.Tpo -c -o ragel-fsmap.o `test -f 'fsmap.cpp' || echo './'`fsmap.cpp [ 283s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-rlscan.o -MD -MP -MF .deps/ragel-rlscan.Tpo -c -o ragel-rlscan.o `test -f 'rlscan.cpp' || echo './'`rlscan.cpp [ 283s] In file included from parsedata.h:36:0, [ 283s] from rlparse.kh:27, [ 283s] from rlscan.h:28, [ 283s] from rlscan.rl:27: [ 283s] parsetree.h: In constructor 'Expression::Expression(Expression*, Term*, Expression::Type)': [ 283s] parsetree.h:386:2: warning: 'Expression::builtin' is initialized with itself [-Winit-self] [ 283s] Expression( Expression *expression, Term *term, Type type ) : [ 283s] ^ [ 283s] parsetree.h: In constructor 'Expression::Expression(Term*)': [ 283s] parsetree.h:391:2: warning: 'Expression::builtin' is initialized with itself [-Winit-self] [ 283s] Expression( Term *term ) : [ 283s] ^ [ 283s] mv -f .deps/ragel-fsmmin.Tpo .deps/ragel-fsmmin.Po [ 283s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-rlparse.o -MD -MP -MF .deps/ragel-rlparse.Tpo -c -o ragel-rlparse.o `test -f 'rlparse.cpp' || echo './'`rlparse.cpp [ 284s] In file included from parsedata.h:36:0, [ 284s] from rlparse.kh:27, [ 284s] from rlparse.kl:22: [ 284s] parsetree.h: In constructor 'Expression::Expression(Expression*, Term*, Expression::Type)': [ 284s] parsetree.h:386:2: warning: 'Expression::builtin' is initialized with itself [-Winit-self] [ 284s] Expression( Expression *expression, Term *term, Type type ) : [ 284s] ^ [ 284s] parsetree.h: In constructor 'Expression::Expression(Term*)': [ 284s] parsetree.h:391:2: warning: 'Expression::builtin' is initialized with itself [-Winit-self] [ 284s] Expression( Term *term ) : [ 284s] ^ [ 284s] mv -f .deps/ragel-fsmgraph.Tpo .deps/ragel-fsmgraph.Po [ 284s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-inputdata.o -MD -MP -MF .deps/ragel-inputdata.Tpo -c -o ragel-inputdata.o `test -f 'inputdata.cpp' || echo './'`inputdata.cpp [ 284s] mv -f .deps/ragel-fsmap.Tpo .deps/ragel-fsmap.Po [ 284s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-common.o -MD -MP -MF .deps/ragel-common.Tpo -c -o ragel-common.o `test -f 'common.cpp' || echo './'`common.cpp [ 284s] In file included from parsedata.h:36:0, [ 284s] from inputdata.cpp:25: [ 284s] parsetree.h: In constructor 'Expression::Expression(Expression*, Term*, Expression::Type)': [ 284s] parsetree.h:386:2: warning: 'Expression::builtin' is initialized with itself [-Winit-self] [ 284s] Expression( Expression *expression, Term *term, Type type ) : [ 284s] ^ [ 284s] parsetree.h: In constructor 'Expression::Expression(Term*)': [ 284s] parsetree.h:391:2: warning: 'Expression::builtin' is initialized with itself [-Winit-self] [ 284s] Expression( Term *term ) : [ 284s] ^ [ 284s] mv -f .deps/ragel-common.Tpo .deps/ragel-common.Po [ 284s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-redfsm.o -MD -MP -MF .deps/ragel-redfsm.Tpo -c -o ragel-redfsm.o `test -f 'redfsm.cpp' || echo './'`redfsm.cpp [ 284s] mv -f .deps/ragel-rlparse.Tpo .deps/ragel-rlparse.Po [ 284s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-gendata.o -MD -MP -MF .deps/ragel-gendata.Tpo -c -o ragel-gendata.o `test -f 'gendata.cpp' || echo './'`gendata.cpp [ 284s] mv -f .deps/ragel-rlscan.Tpo .deps/ragel-rlscan.Po [ 284s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-cdcodegen.o -MD -MP -MF .deps/ragel-cdcodegen.Tpo -c -o ragel-cdcodegen.o `test -f 'cdcodegen.cpp' || echo './'`cdcodegen.cpp [ 284s] mv -f .deps/ragel-inputdata.Tpo .deps/ragel-inputdata.Po [ 284s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-cdtable.o -MD -MP -MF .deps/ragel-cdtable.Tpo -c -o ragel-cdtable.o `test -f 'cdtable.cpp' || echo './'`cdtable.cpp [ 285s] mv -f .deps/ragel-redfsm.Tpo .deps/ragel-redfsm.Po [ 285s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-cdftable.o -MD -MP -MF .deps/ragel-cdftable.Tpo -c -o ragel-cdftable.o `test -f 'cdftable.cpp' || echo './'`cdftable.cpp [ 285s] mv -f .deps/ragel-cdcodegen.Tpo .deps/ragel-cdcodegen.Po [ 285s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-cdflat.o -MD -MP -MF .deps/ragel-cdflat.Tpo -c -o ragel-cdflat.o `test -f 'cdflat.cpp' || echo './'`cdflat.cpp [ 285s] mv -f .deps/ragel-cdtable.Tpo .deps/ragel-cdtable.Po [ 285s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-cdfflat.o -MD -MP -MF .deps/ragel-cdfflat.Tpo -c -o ragel-cdfflat.o `test -f 'cdfflat.cpp' || echo './'`cdfflat.cpp [ 285s] mv -f .deps/ragel-gendata.Tpo .deps/ragel-gendata.Po [ 285s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-cdgoto.o -MD -MP -MF .deps/ragel-cdgoto.Tpo -c -o ragel-cdgoto.o `test -f 'cdgoto.cpp' || echo './'`cdgoto.cpp [ 285s] mv -f .deps/ragel-cdftable.Tpo .deps/ragel-cdftable.Po [ 285s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-cdfgoto.o -MD -MP -MF .deps/ragel-cdfgoto.Tpo -c -o ragel-cdfgoto.o `test -f 'cdfgoto.cpp' || echo './'`cdfgoto.cpp [ 286s] mv -f .deps/ragel-cdfflat.Tpo .deps/ragel-cdfflat.Po [ 286s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-cdipgoto.o -MD -MP -MF .deps/ragel-cdipgoto.Tpo -c -o ragel-cdipgoto.o `test -f 'cdipgoto.cpp' || echo './'`cdipgoto.cpp [ 286s] mv -f .deps/ragel-cdflat.Tpo .deps/ragel-cdflat.Po [ 286s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-cdsplit.o -MD -MP -MF .deps/ragel-cdsplit.Tpo -c -o ragel-cdsplit.o `test -f 'cdsplit.cpp' || echo './'`cdsplit.cpp [ 286s] mv -f .deps/ragel-cdfgoto.Tpo .deps/ragel-cdfgoto.Po [ 286s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-javacodegen.o -MD -MP -MF .deps/ragel-javacodegen.Tpo -c -o ragel-javacodegen.o `test -f 'javacodegen.cpp' || echo './'`javacodegen.cpp [ 286s] mv -f .deps/ragel-cdgoto.Tpo .deps/ragel-cdgoto.Po [ 286s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-rubycodegen.o -MD -MP -MF .deps/ragel-rubycodegen.Tpo -c -o ragel-rubycodegen.o `test -f 'rubycodegen.cpp' || echo './'`rubycodegen.cpp [ 286s] mv -f .deps/ragel-cdipgoto.Tpo .deps/ragel-cdipgoto.Po [ 286s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-rubytable.o -MD -MP -MF .deps/ragel-rubytable.Tpo -c -o ragel-rubytable.o `test -f 'rubytable.cpp' || echo './'`rubytable.cpp [ 286s] mv -f .deps/ragel-cdsplit.Tpo .deps/ragel-cdsplit.Po [ 286s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-rubyftable.o -MD -MP -MF .deps/ragel-rubyftable.Tpo -c -o ragel-rubyftable.o `test -f 'rubyftable.cpp' || echo './'`rubyftable.cpp [ 288s] mv -f .deps/ragel-rubycodegen.Tpo .deps/ragel-rubycodegen.Po [ 288s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-rubyflat.o -MD -MP -MF .deps/ragel-rubyflat.Tpo -c -o ragel-rubyflat.o `test -f 'rubyflat.cpp' || echo './'`rubyflat.cpp [ 288s] mv -f .deps/ragel-rubytable.Tpo .deps/ragel-rubytable.Po [ 288s] mv -f .deps/ragel-rubyftable.Tpo .deps/ragel-rubyftable.Po [ 288s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-rubyfflat.o -MD -MP -MF .deps/ragel-rubyfflat.Tpo -c -o ragel-rubyfflat.o `test -f 'rubyfflat.cpp' || echo './'`rubyfflat.cpp [ 288s] mv -f .deps/ragel-javacodegen.Tpo .deps/ragel-javacodegen.Po [ 288s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-rbxgoto.o -MD -MP -MF .deps/ragel-rbxgoto.Tpo -c -o ragel-rbxgoto.o `test -f 'rbxgoto.cpp' || echo './'`rbxgoto.cpp [ 288s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-cscodegen.o -MD -MP -MF .deps/ragel-cscodegen.Tpo -c -o ragel-cscodegen.o `test -f 'cscodegen.cpp' || echo './'`cscodegen.cpp [ 289s] mv -f .deps/ragel-rubyfflat.Tpo .deps/ragel-rubyfflat.Po [ 290s] mv -f .deps/ragel-cscodegen.Tpo .deps/ragel-cscodegen.Po [ 290s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-cstable.o -MD -MP -MF .deps/ragel-cstable.Tpo -c -o ragel-cstable.o `test -f 'cstable.cpp' || echo './'`cstable.cpp [ 290s] mv -f .deps/ragel-rubyflat.Tpo .deps/ragel-rubyflat.Po [ 290s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-csftable.o -MD -MP -MF .deps/ragel-csftable.Tpo -c -o ragel-csftable.o `test -f 'csftable.cpp' || echo './'`csftable.cpp [ 290s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-csflat.o -MD -MP -MF .deps/ragel-csflat.Tpo -c -o ragel-csflat.o `test -f 'csflat.cpp' || echo './'`csflat.cpp [ 290s] mv -f .deps/ragel-rbxgoto.Tpo .deps/ragel-rbxgoto.Po [ 290s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-csfflat.o -MD -MP -MF .deps/ragel-csfflat.Tpo -c -o ragel-csfflat.o `test -f 'csfflat.cpp' || echo './'`csfflat.cpp [ 290s] mv -f .deps/ragel-cstable.Tpo .deps/ragel-cstable.Po [ 290s] mv -f .deps/ragel-csfflat.Tpo .deps/ragel-csfflat.Po [ 290s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-csgoto.o -MD -MP -MF .deps/ragel-csgoto.Tpo -c -o ragel-csgoto.o `test -f 'csgoto.cpp' || echo './'`csgoto.cpp [ 290s] mv -f .deps/ragel-csftable.Tpo .deps/ragel-csftable.Po [ 290s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-csfgoto.o -MD -MP -MF .deps/ragel-csfgoto.Tpo -c -o ragel-csfgoto.o `test -f 'csfgoto.cpp' || echo './'`csfgoto.cpp [ 290s] mv -f .deps/ragel-csflat.Tpo .deps/ragel-csflat.Po [ 290s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-csipgoto.o -MD -MP -MF .deps/ragel-csipgoto.Tpo -c -o ragel-csipgoto.o `test -f 'csipgoto.cpp' || echo './'`csipgoto.cpp [ 290s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-cssplit.o -MD -MP -MF .deps/ragel-cssplit.Tpo -c -o ragel-cssplit.o `test -f 'cssplit.cpp' || echo './'`cssplit.cpp [ 291s] mv -f .deps/ragel-csfgoto.Tpo .deps/ragel-csfgoto.Po [ 291s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-dotcodegen.o -MD -MP -MF .deps/ragel-dotcodegen.Tpo -c -o ragel-dotcodegen.o `test -f 'dotcodegen.cpp' || echo './'`dotcodegen.cpp [ 291s] mv -f .deps/ragel-cssplit.Tpo .deps/ragel-cssplit.Po [ 291s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-xmlcodegen.o -MD -MP -MF .deps/ragel-xmlcodegen.Tpo -c -o ragel-xmlcodegen.o `test -f 'xmlcodegen.cpp' || echo './'`xmlcodegen.cpp [ 291s] mv -f .deps/ragel-csipgoto.Tpo .deps/ragel-csipgoto.Po [ 291s] mv -f .deps/ragel-csgoto.Tpo .deps/ragel-csgoto.Po [ 291s] In file included from parsedata.h:36:0, [ 291s] from xmlcodegen.h:28, [ 291s] from xmlcodegen.cpp:24: [ 291s] parsetree.h: In constructor 'Expression::Expression(Expression*, Term*, Expression::Type)': [ 291s] parsetree.h:386:2: warning: 'Expression::builtin' is initialized with itself [-Winit-self] [ 291s] Expression( Expression *expression, Term *term, Type type ) : [ 291s] ^ [ 291s] parsetree.h: In constructor 'Expression::Expression(Term*)': [ 291s] parsetree.h:391:2: warning: 'Expression::builtin' is initialized with itself [-Winit-self] [ 291s] Expression( Term *term ) : [ 291s] ^ [ 291s] mv -f .deps/ragel-dotcodegen.Tpo .deps/ragel-dotcodegen.Po [ 291s] mv -f .deps/ragel-xmlcodegen.Tpo .deps/ragel-xmlcodegen.Po [ 291s] g++ -Wall -g -o ragel ragel-main.o ragel-parsetree.o ragel-parsedata.o ragel-fsmstate.o ragel-fsmbase.o ragel-fsmattach.o ragel-fsmmin.o ragel-fsmgraph.o ragel-fsmap.o ragel-rlscan.o ragel-rlparse.o ragel-inputdata.o ragel-common.o ragel-redfsm.o ragel-gendata.o ragel-cdcodegen.o ragel-cdtable.o ragel-cdftable.o ragel-cdflat.o ragel-cdfflat.o ragel-cdgoto.o ragel-cdfgoto.o ragel-cdipgoto.o ragel-cdsplit.o ragel-javacodegen.o ragel-rubycodegen.o ragel-rubytable.o ragel-rubyftable.o ragel-rubyflat.o ragel-rubyfflat.o ragel-rbxgoto.o ragel-cscodegen.o ragel-cstable.o ragel-csftable.o ragel-csflat.o ragel-csfflat.o ragel-csgoto.o ragel-csfgoto.o ragel-csipgoto.o ragel-cssplit.o ragel-dotcodegen.o ragel-xmlcodegen.o [ 292s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ragel-6.8/ragel' [ 292s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/ragel-6.8/ragel' [ 292s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/ragel-6.8' [ 292s] make[1]: Nothing to be done for `all-am'. [ 292s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/ragel-6.8' [ 292s] + exit 0 [ 292s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.klTlA0 [ 292s] + umask 022 [ 292s] + cd /home/abuild/rpmbuild/BUILD [ 292s] + cd ragel-6.8 [ 292s] + LANG=C [ 292s] + export LANG [ 292s] + unset DISPLAY [ 292s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/ragel-6.8-1.1.arm [ 292s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/ragel-6.8-1.1.arm [ 292s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/ragel-6.8-1.1.arm [ 292s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/ragel-6.8-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/ragel-6.8-1.1.arm install [ 292s] Making install in ragel [ 292s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/ragel-6.8/ragel' [ 292s] /usr/bin/make install-am [ 292s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ragel-6.8/ragel' [ 292s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/ragel-6.8/ragel' [ 292s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/ragel-6.8-1.1.arm/usr/bin" [ 292s] /usr/bin/install -c ragel '/home/abuild/rpmbuild/BUILDROOT/ragel-6.8-1.1.arm/usr/bin' [ 292s] make[3]: Nothing to be done for `install-data-am'. [ 292s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/ragel-6.8/ragel' [ 292s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ragel-6.8/ragel' [ 292s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/ragel-6.8/ragel' [ 292s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/ragel-6.8' [ 292s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ragel-6.8' [ 292s] make[2]: Nothing to be done for `install-exec-am'. [ 292s] test -z "/usr/share/doc/ragel" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/ragel-6.8-1.1.arm/usr/share/doc/ragel" [ 292s] /usr/bin/install -c -m 644 CREDITS ChangeLog '/home/abuild/rpmbuild/BUILDROOT/ragel-6.8-1.1.arm/usr/share/doc/ragel' [ 292s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ragel-6.8' [ 292s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/ragel-6.8' [ 292s] + rm -f /home/abuild/rpmbuild/BUILDROOT/ragel-6.8-1.1.arm/usr/share/info/dir [ 292s] + find /home/abuild/rpmbuild/BUILDROOT/ragel-6.8-1.1.arm -regex '.*\.la$' [ 292s] + xargs rm -f -- [ 292s] + find /home/abuild/rpmbuild/BUILDROOT/ragel-6.8-1.1.arm -regex '.*\.a$' [ 292s] + xargs rm -f -- [ 292s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/ragel-6.8-1.1.arm/usr/share/license [ 292s] + cp /home/abuild/rpmbuild/BUILD/ragel-6.8/COPYING /home/abuild/rpmbuild/BUILDROOT/ragel-6.8-1.1.arm/usr/share/license/ragel [ 292s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/ragel-6.8 [ 292s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/ragel-6.8-1.1.arm/usr/bin/ragel [ 292s] 3082 blocks [ 292s] + /usr/lib/rpm/check-buildroot [ 292s] + /usr/lib/rpm//brp-compress [ 292s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 293s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 293s] + /usr/lib/rpm/brp-python-hardlink [ 293s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/ragel-6.8-1.1.arm [ 293s] Processing files: ragel-6.8-1.1.armv7l [ 293s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 293s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libm.so.6 libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(CXXABI_1.3.1) libstdc++.so.6(CXXABI_ARM_1.3.3) libstdc++.so.6(GLIBCXX_3.4) [ 293s] Processing files: ragel-debuginfo-6.8-1.1.armv7l [ 293s] Processing files: ragel-debugsource-6.8-1.1.armv7l [ 293s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/ragel-6.8-1.1.arm [ 293s] Wrote: /home/abuild/rpmbuild/SRPMS/ragel-6.8-1.1.src.rpm [ 293s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/ragel-6.8-1.1.armv7l.rpm [ 294s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/ragel-debuginfo-6.8-1.1.armv7l.rpm [ 294s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/ragel-debugsource-6.8-1.1.armv7l.rpm [ 294s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.1LTcDI [ 294s] + umask 022 [ 294s] + cd /home/abuild/rpmbuild/BUILD [ 294s] + cd ragel-6.8 [ 294s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/ragel-6.8-1.1.arm [ 294s] + exit 0 [ 294s] ... checking for files with abuild user/group [ 294s] ... creating baselibs [ 294s] ... saving built statistics [ 294s] ... saving built packages [ 295s] /home/abuild/rpmbuild/RPMS/armv7l/ragel-6.8-1.1.armv7l.rpm [ 295s] /home/abuild/rpmbuild/RPMS/armv7l/ragel-debuginfo-6.8-1.1.armv7l.rpm [ 295s] /home/abuild/rpmbuild/RPMS/armv7l/ragel-debugsource-6.8-1.1.armv7l.rpm [ 295s] /home/abuild/rpmbuild/SRPMS/ragel-6.8-1.1.src.rpm [ 295s] /home/abuild/rpmbuild/OTHER/_statistics [ 295s] [ 295s] w12 finished "build ragel.spec" at Thu Oct 29 04:49:50 UTC 2015. [ 295s] [ 299s] [ 291.044122] SysRq : Power Off [ 299s] [ 291.051786] Power down. [ 299s] build: extracting built packages... [ 300s] ragel-6.8-1.1.armv7l.rpm [ 300s] ragel-debuginfo-6.8-1.1.armv7l.rpm [ 300s] ragel-debugsource-6.8-1.1.armv7l.rpm [ 300s] ragel-6.8-1.1.src.rpm [ 300s] _statistics