[ 0s] Memory limit set to 82442244KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_8 [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] [ 0s] [ 0s] obsnw17 started "build _service:gbs:ise-engine-hangul.spec" at Sun Apr 23 02:13:07 UTC 2017. [ 0s] [ 0s] Building ise-engine-hangul for project 'Tizen:3.0:Common' repository 'emulator32-wayland' arch 'i586' srcmd5 '15e22a931c46a58fa1a7cb34dc880c88' [ 0s] [ 0s] processing recipe /var/cache/build/root_8/.build-srcdir/_service:gbs:ise-engine-hangul.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_8/.build-srcdir/_service:gbs:ise-engine-hangul.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/8/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_8/.build.rpmlist /var/cache/build/root_8/.build-srcdir/_service:gbs:ise-engine-hangul.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/35] preinstalling libmagic-data... [ 1s] [2/35] preinstalling setup... [ 1s] [3/35] preinstalling filesystem... [ 1s] [4/35] preinstalling glibc... [ 1s] [5/35] preinstalling bash... [ 1s] [6/35] preinstalling diffutils... [ 1s] [7/35] preinstalling grep... [ 1s] [8/35] preinstalling libattr... [ 1s] [9/35] preinstalling libbz2... [ 1s] [10/35] preinstalling libcap... [ 1s] [11/35] preinstalling libelf... [ 1s] [12/35] preinstalling libfreebl3... [ 1s] [13/35] preinstalling libgcc... [ 1s] [14/35] preinstalling liblua... [ 1s] [15/35] preinstalling liblzma... [ 1s] [16/35] preinstalling libncurses... [ 1s] [17/35] preinstalling libpopt... [ 1s] [18/35] preinstalling libsmack... [ 1s] [19/35] preinstalling libsqlite... [ 1s] [20/35] preinstalling nspr... [ 1s] [21/35] preinstalling sed... [ 1s] [22/35] preinstalling zlib... [ 1s] [23/35] preinstalling coreutils... [ 2s] [24/35] preinstalling libacl... [ 2s] [25/35] preinstalling libreadline... [ 2s] [26/35] preinstalling smack... [ 2s] [27/35] preinstalling bzip2... [ 2s] [28/35] preinstalling libmagic... [ 2s] [29/35] preinstalling libxml2... [ 2s] [30/35] preinstalling tar... [ 2s] [31/35] preinstalling util-linux... [ 2s] [32/35] preinstalling util-linux-su... [ 2s] [33/35] preinstalling nss... [ 2s] [34/35] preinstalling libsoftokn3... [ 2s] [35/35] preinstalling rpm... [ 2s] [ 2s] running setup postinstall script [ 2s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 2s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 2s] initializing rpm db... [ 2s] reordering...cycle: gio-branding-upstream -> libgio [ 2s] breaking dependency libgio -> gio-branding-upstream [ 2s] cycle: vconf-compat -> buxton2 [ 2s] breaking dependency buxton2 -> vconf-compat [ 2s] cycle: libsensord -> sensord [ 2s] breaking dependency libsensord -> sensord [ 2s] cycle: efl -> eina [ 2s] breaking dependency efl -> eina [ 2s] cycle: efl -> eo [ 2s] breaking dependency eo -> efl [ 2s] cycle: efl -> eo -> eina [ 2s] breaking dependency eo -> eina [ 2s] cycle: ecore -> eeze [ 2s] breaking dependency ecore -> eeze [ 2s] cycle: ecore -> eldbus [ 2s] breaking dependency ecore -> eldbus [ 2s] cycle: ecore -> evas [ 2s] breaking dependency evas -> ecore [ 2s] cycle: bluetooth-tools -> bluetooth-tools-no-firmware [ 2s] breaking dependency bluetooth-tools-no-firmware -> bluetooth-tools [ 2s] cycle: syspopup -> syspopup-caller [ 2s] breaking dependency syspopup -> syspopup-caller [ 2s] cycle: isf -> org.tizen.isf-kbd-mode-changer [ 2s] breaking dependency isf -> org.tizen.isf-kbd-mode-changer [ 2s] cycle: libsoftokn3 -> nss [ 2s] breaking dependency nss -> libsoftokn3 [ 2s] done [ 3s] [1/218] installing default-ac-domains-0.1-2.1 [ 3s] [2/218] installing libmagic-data-5.28-1.16 [ 3s] [3/218] installing setup-0.9-1.8 [ 3s] [4/218] installing terminfo-base-5.9-1.19 [ 3s] [5/218] installing filesystem-3.1-1.2 [ 3s] [6/218] installing glibc-2.20-1.2 [ 3s] [7/218] installing bash-3.2.57-2.1 [ 3s] [8/218] installing capi-base-common-0.4.12-1.1 [ 3s] [9/218] installing cpio-2.11-1.3 [ 3s] [10/218] installing diffutils-3.3-1.3 [ 3s] [11/218] installing findutils-4.3.8-1.17 [ 3s] [12/218] installing fribidi-0.19.7-3.1 [ 3s] [13/218] installing gdbm-1.8.3-1.3 [ 3s] [14/218] installing giflib-5.1.2-3.1 [ 3s] [15/218] installing hostname-3.12-1.3 [ 3s] [16/218] installing iniparser-3.2-1.1 [ 3s] [17/218] installing libatomic-4.9.2-1.6 [ 3s] [18/218] installing libattr-2.4.47-1.17 [ 3s] [19/218] installing libbz2-1.0.6-1.39 [ 4s] [20/218] installing libcap-2.24-1.17 [ 4s] [21/218] installing libdrm-2.4.58-1.1 [ 4s] [22/218] installing libelf-0.153-1.25 [ 4s] [23/218] installing libelf0-0.8.13-1.3 [ 4s] [24/218] installing libevdev-1.2.2-1.1 [ 4s] [25/218] installing libexpat-2.2.0-1.17 [ 4s] [26/218] installing libext2fs-1.42.13-1.2 [ 4s] [27/218] installing libffi-3.1-1.3 [ 4s] [28/218] installing libfreebl3-3.23-1.35 [ 4s] [29/218] installing libgcc-4.9.2-1.6 [ 4s] [30/218] installing libgomp-4.9.2-1.6 [ 4s] [31/218] installing libhyphen-2.8.8-3.1 [ 4s] [32/218] installing libitm-4.9.2-1.6 [ 4s] [33/218] installing libjpeg-8.0.2-1.1 [ 4s] [34/218] installing libjson-0.12-3.1 [ 4s] [35/218] installing libltdl-2.4.2-1.23 [ 4s] [36/218] installing liblua-5.1.4-1.7 [ 4s] [37/218] installing liblzma-5.2.2-1.19 [ 4s] [38/218] installing libmtdev-1.1.5-2.1 [ 4s] [39/218] installing libogg-1.3.2-3.1 [ 4s] [40/218] installing libpcre-8.39-1.3 [ 4s] [41/218] installing libpopt-1.16-1.5 [ 4s] [42/218] installing libpython-2.7.8-1.11 [ 5s] [43/218] installing libsmack-1.3.0-1.15 [ 5s] [44/218] installing libsmartcols-2.28-1.3 [ 5s] [45/218] installing libsqlite-3.8.10.2-1.5 [ 5s] [46/218] installing libuuid-2.28-1.3 [ 5s] [47/218] installing libwayland-egl-1.0-2.1 [ 5s] [48/218] installing libxkbcommon-0.4.3-3.1 [ 5s] [49/218] installing m4-1.4.17-1.3 [ 5s] [50/218] installing net-tools-2.0_20121208git-1.3 [ 5s] [51/218] installing nspr-4.12-1.10 [ 5s] [52/218] installing patch-2.7-1.5 [ 5s] [53/218] installing pixman-0.32.6-3.1 [ 5s] [54/218] installing pkg-config-0.28-1.21 [ 5s] [55/218] installing rfkill-0.4-3.1 [ 5s] [56/218] installing sed-4.1c-1.3 [ 5s] [57/218] installing update-alternatives-1.16.3-1.3 [ 5s] [58/218] installing which-2.20-1.3 [ 5s] [59/218] installing xdgmime-0.0.12-1.1 [ 5s] [60/218] installing zlib-1.2.8-1.22 [ 5s] [61/218] installing libncurses-5.9-1.19 [ 5s] [62/218] installing shadow-utils-4.1.4.2-1.2 [ 5s] [63/218] installing build-compare-2015.04.28-1.15 [ 5s] [64/218] installing coreutils-6.9-1.3 [ 5s] [65/218] installing cpp-4.9.2-1.6 [ 6s] [66/218] installing gawk-3.1.5-1.3 [ 6s] [67/218] installing gcc-c++-4.9.2-1.6 [ 7s] [68/218] installing grep-2.5.2-1.3 [ 7s] [69/218] installing less-466-1.3 [ 7s] [70/218] installing libacl-2.2.52-1.17 [ 7s] [71/218] installing libasm-0.153-1.25 [ 7s] [72/218] installing libblkid-2.28-1.3 [ 7s] [73/218] installing libcap-tools-2.24-1.17 [ 7s] [74/218] installing libglib-2.44.1-2.1 [ 7s] [75/218] installing libhangul-0.1.0-3.1 [ 7s] [76/218] installing libopenssl-1.0.2j-1.21 [ 8s] [77/218] installing libpcreposix-8.39-1.3 [ 8s] [78/218] installing libpng-1.6.21-3.1 [ 8s] [79/218] installing libreadline-5.2-1.18 [ 8s] [80/218] installing libstdc++-4.9.2-1.6 [ 8s] [81/218] installing libvorbis-1.3.4-3.1 [ 8s] [82/218] installing make-4.0-1.5 [ 8s] [83/218] installing minizip-1.2.8-1.22 [ 8s] [84/218] installing nss-certs-3.23-1.35 [ 8s] [85/218] installing pkgmgr-0.2.91-1.1 [ 8s] /var/tmp/rpm-tmp.UMduKE: line 9: /etc/tizen-platform.conf: No such file or directory [ 8s] warning: %post(pkgmgr-0.2.91-1.1.i686) scriptlet failed, exit status 1 [ 8s] [86/218] installing psmisc-22.21-2.1 [ 8s] [87/218] installing smack-1.3.0-1.15 [ 8s] [88/218] installing binutils-2.25-1.12 [ 8s] [89/218] installing bzip2-1.0.6-1.39 [ 9s] [90/218] installing libmagic-5.28-1.16 [ 9s] [91/218] installing libxml2-2.9.4-2.15 [ 9s] [92/218] installing xz-5.2.2-1.19 [ 9s] [93/218] installing ttrace-1.0.3-1.1 [ 9s] [94/218] installing libdw-0.153-1.25 [ 9s] [95/218] installing libstdc++-devel-4.9.2-1.6 [ 9s] [96/218] installing file-5.28-1.16 [ 9s] [97/218] installing libgmodule-2.44.1-2.1 [ 9s] [98/218] installing libgthread-2.44.1-2.1 [ 9s] [99/218] installing libhangul-devel-0.1.0-3.1 [ 9s] [100/218] installing libmount-2.28-1.3 [ 9s] [101/218] installing linux-glibc-devel-3.10-1.24 [ 10s] [102/218] installing tar-1.17-1.3 [ 10s] [103/218] installing db4-4.8.30.NC-1.25 [ 10s] [104/218] installing gettext-runtime-0.19.7-1.9 [ 10s] [105/218] installing glibc-locale-2.20-1.2 [ 10s] [106/218] installing gzip-1.3.12-1.17 [ 10s] [107/218] installing libcilkrts-4.9.2-1.6 [ 10s] [108/218] installing libfdisk1-2.28-1.3 [ 10s] [109/218] installing libfreetype-2.6.5-2.1 [ 10s] [110/218] installing libgobject-2.44.1-2.1 [ 10s] [111/218] installing libubsan-4.9.2-1.6 [ 10s] [112/218] installing pam-1.1.6-1.2 [ 11s] [113/218] installing security-config-1.0-2.1 [ 12s] usermod: user 'buxton' does not exist [ 12s] usermod: user 'dbus' does not exist [ 12s] [114/218] installing tizen-platform-config-2.2-1.1 [ 12s] [115/218] installing libicu-57.1-3.1 [ 14s] [116/218] installing libpcrecpp-8.39-1.3 [ 14s] [117/218] installing libsndfile-1.0.26-1.1 [ 14s] [118/218] installing tzdata-2016i-1.1 [ 14s] [119/218] installing cynara-db-migration-0.14.10-2.1 [ 14s] [120/218] installing libtiff-4.0.6-1.1 [ 14s] [121/218] installing elfutils-0.153-1.25 [ 14s] [122/218] installing shared-mime-info-1.3-2.1 [ 17s] [123/218] installing glibc-devel-2.20-1.2 [ 17s] [124/218] installing libtzplatform-config-2.2-1.1 [ 17s] [125/218] installing perl-5.20.0-1.28 [ 19s] [126/218] installing libsystemd-219-2.1 [ 19s] [127/218] installing libharfbuzz-1.3.0-3.1 [ 19s] [128/218] installing pcre-devel-8.39-1.3 [ 19s] [129/218] installing fontconfig-2.12.1-2.1 [ 19s] [130/218] installing libcynara-commons-0.14.10-2.1 [ 19s] [131/218] installing gcc-4.9.2-1.6 [ 20s] [132/218] installing python-2.7.8-1.11 [ 21s] [133/218] installing util-linux-2.28-1.3 [ 21s] [134/218] installing build-mkbaselibs-20120927-1.3 [ 21s] [135/218] installing tizen-platform-config-tools-2.2-1.1 [ 21s] [136/218] installing autoconf-2.69-1.24 [ 22s] [137/218] installing dbus-libs-1.10.6-2.1 [ 22s] [138/218] installing python-xml-2.7.8-1.11 [ 22s] [139/218] installing util-linux-su-2.28-1.3 [ 22s] [140/218] installing gettext-tools-0.19.7-1.9 [ 22s] [141/218] installing libcynara-client-0.14.10-2.1 [ 22s] [142/218] installing libcynara-creds-commons-0.14.10-2.1 [ 22s] [143/218] installing libcynara-session-0.14.10-2.1 [ 22s] [144/218] installing libinput-0.11.0-1.1 [ 23s] [145/218] installing libdlog-0.5.1-1.1 [ 23s] [146/218] installing coregl-0.1.10-2.1 [ 23s] [147/218] installing libwayland-client-1.10.0-1.1 [ 23s] [148/218] installing libwayland-server-1.10.0-1.1 [ 23s] [149/218] installing automake-1.14.1-1.21 [ 23s] [150/218] installing libslp-db-util-0.1.1-1.1 [ 23s] [151/218] installing build-20120927-1.3 [ 23s] [152/218] installing libcynara-creds-socket-0.14.10-2.1 [ 23s] [153/218] installing libpulse-5.0-2.1 [ 23s] [154/218] installing capi-system-info-0.2.0-2.1 [ 23s] I/O warning : failed to load external entity "/etc/config/model-config.xml" [ 23s] iniparser: cannot open /etc/info.ini [ 23s] [155/218] installing libwayland-cursor-1.10.0-1.1 [ 24s] [156/218] installing libwayland-extension-client-1.1.13-2.1 [ 24s] [157/218] installing libtool-2.4.2-1.23 [ 24s] [158/218] installing libtbm-2.0.16-1.1 [ 24s] [159/218] installing libwayland-tbm-client-0.1.19-2.1 [ 24s] [160/218] installing libwayland-tbm-server-0.1.19-2.1 [ 24s] [161/218] installing libtdm-1.6.14-1.1 [ 24s] [162/218] installing libgbm-1.0-3.1 [ 24s] [163/218] installing libtdm-client-1.6.14-1.1 [ 24s] [164/218] installing bluetooth-tools-no-firmware-0.2.37-2.1 [ 24s] [165/218] installing eo-1.16.0-2.1 [ 24s] [166/218] installing nss-3.23-1.35 [ 24s] [167/218] installing libgio-2.44.1-2.1 [ 24s] [168/218] installing gio-branding-upstream-2.44.1-2.1 [ 24s] [169/218] installing bluetooth-tools-0.2.37-2.1 [ 25s] [170/218] installing efl-1.16.0-2.1 [ 25s] [171/218] installing libjson-glib-1.2.0-3.1 [ 25s] [172/218] installing libsoftokn3-3.23-1.35 [ 25s] [173/218] installing glib2-tools-2.44.1-2.1 [ 25s] [174/218] installing rpm-4.11.0.1-1.17 [ 25s] [175/218] installing buxton2-1.2.0-1.1 [ 25s] warning: user buxton does not exist - using root [ 25s] warning: group buxton does not exist - using root [ 25s] warning: user buxton does not exist - using root [ 25s] warning: group buxton does not exist - using root [ 25s] chmod: cannot access `/etc/buxton2/*': No such file or directory [ 25s] /etc/buxton2/*: No such file or directory [ 25s] chmod: cannot access `/var/lib/buxton2/*': No such file or directory [ 25s] /var/lib/buxton2/*: No such file or directory [ 25s] [176/218] installing bundle-0.1.31-1.1 [ 25s] [177/218] installing eina-1.16.0-2.1 [ 25s] [178/218] installing vconf-compat-1.2.0-1.1 [ 25s] [179/218] installing glib2-devel-2.44.1-2.1 [ 25s] [180/218] installing rpm-build-4.11.0.1-1.17 [ 25s] [181/218] installing embryo-1.16.0-2.1 [ 25s] [182/218] installing ector-1.16.0-2.1 [ 25s] [183/218] installing eventsystem-0.0.1-2.1 [ 26s] [184/218] installing emile-1.16.0-2.1 [ 26s] [185/218] installing libstorage-0.1.1-1.1 [ 26s] [186/218] installing pkgmgr-info-0.1.2-1.1 [ 26s] [187/218] installing libsensord-2.0.9-2.1 [ 26s] [188/218] installing eet-1.16.0-2.1 [ 26s] [189/218] installing pkgmgr-installer-0.2.91-1.1 [ 26s] [190/218] installing pkgmgr-client-0.2.91-1.1 [ 26s] [191/218] installing sensord-2.0.9-2.1 [ 26s] /var/tmp/rpm-tmp.gkESwy: line 1: systemctl: command not found [ 26s] warning: %post(sensord-2.0.9-2.1.i686) scriptlet failed, exit status 127 [ 26s] [192/218] installing capi-appfw-package-manager-0.0.30-1.1 [ 26s] [193/218] installing aul-0.1.0-1.1 [ 26s] [194/218] installing evas-1.16.0-2.1 [ 26s] [195/218] installing app-core-common-1.2-1.1 [ 26s] [196/218] installing ecore-1.16.0-2.1 [ 27s] [197/218] installing app-svc-0.1.53-2.1 [ 27s] [198/218] installing edbus-1.7.9-3.1 [ 27s] [199/218] installing efreet-1.16.0-2.1 [ 27s] [200/218] installing eldbus-1.16.0-2.1 [ 27s] [201/218] installing eeze-1.16.0-2.1 [ 27s] [202/218] installing eio-1.16.0-2.1 [ 27s] [203/218] installing edje-1.16.0-2.1 [ 27s] [204/218] installing emotion-1.16.0-2.1 [ 27s] [205/218] installing ethumb-1.16.0-2.1 [ 27s] [206/218] installing elementary-1.16.0-2.1 [ 27s] [207/218] installing efl-extension-0.1.2-3.1 [ 27s] [208/218] installing capi-ui-efl-util-0.3.16-1.1 [ 27s] [209/218] installing app-core-efl-1.2-1.1 [ 28s] [210/218] installing syspopup-0.0.100-1.1 [ 28s] [211/218] installing capi-appfw-application-0.2.0-2.1 [ 28s] [212/218] installing bluetooth-frwk-0.2.156-2.1 [ 28s] [213/218] installing syspopup-caller-0.0.100-1.1 [ 28s] [214/218] installing notification-0.2.41-1.1 [ 28s] [215/218] installing capi-network-bluetooth-0.3.3-1.1 [ 28s] [216/218] installing isf-3.0.186-2.1 [ 28s] [217/218] installing isf-devel-3.0.186-2.1 [ 28s] [218/218] installing org.tizen.isf-kbd-mode-changer-3.0.186-2.1 [ 28s] removing nis flags from /var/cache/build/root_8/etc/nsswitch.conf... [ 28s] now finalizing build dir... [ 29s] build target is i686-tizen-linux [ 29s] ----------------------------------------------------------------- [ 29s] I have the following modifications for ise-engine-hangul.spec: [ 29s] 5c5 [ 29s] < Release: 1 [ 29s] --- [ 29s] > Release: 1.1 [ 29s] 49a50 [ 29s] > %changelog [ 29s] ----------------------------------------------------------------- [ 29s] ----- building ise-engine-hangul.spec (user abuild) [ 29s] ----------------------------------------------------------------- [ 29s] ----------------------------------------------------------------- [ 29s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=i686-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0:Common/emulator32-wayland/15e22a931c46a58fa1a7cb34dc880c88-ise-engine-hangul' -ba /home/abuild/rpmbuild/SOURCES/ise-engine-hangul.spec [ 29s] Building target platforms: i686-tizen-linux [ 29s] Building for target i686-tizen-linux [ 29s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.uEkZ2t [ 29s] + umask 022 [ 29s] + cd /home/abuild/rpmbuild/BUILD [ 29s] + cd /home/abuild/rpmbuild/BUILD [ 29s] + rm -rf ise-engine-hangul-1.0.10 [ 29s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/ise-engine-hangul-1.0.10.tar.gz [ 29s] + /bin/tar -xf - [ 29s] + STATUS=0 [ 29s] + '[' 0 -ne 0 ']' [ 29s] + cd ise-engine-hangul-1.0.10 [ 29s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 29s] + exit 0 [ 29s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.aYTHbr [ 29s] + umask 022 [ 29s] + cd /home/abuild/rpmbuild/BUILD [ 29s] + cd ise-engine-hangul-1.0.10 [ 29s] ++ uname -m [ 29s] + [[ i686 == \a\a\r\c\h\6\4 ]] [ 29s] + LANG=C [ 29s] + export LANG [ 29s] + unset DISPLAY [ 29s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 29s] + export CFLAGS [ 29s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 29s] + export CXXFLAGS [ 29s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I%_fmoddir' [ 29s] + export FFLAGS [ 29s] + LDFLAGS= [ 29s] + export LDFLAGS [ 29s] + LD_AS_NEEDED=1 [ 29s] + export LD_AS_NEEDED [ 29s] + export 'CFLAGS+= -fvisibility=hidden ' [ 29s] + CFLAGS+=' -fvisibility=hidden ' [ 29s] + export 'CXXFLAGS+= -fvisibility=hidden ' [ 29s] + CXXFLAGS+=' -fvisibility=hidden ' [ 29s] + export 'CPPFLAGS+= -DEXPORTED=__attribute__\(\(visibility\(\"default\"\)\)\)' [ 29s] + CPPFLAGS+=' -DEXPORTED=__attribute__\(\(visibility\(\"default\"\)\)\)' [ 29s] + ./bootstrap [ 29s] + touch ChangeLog [ 29s] + autopoint --force [ 30s] Copying file ABOUT-NLS [ 30s] Copying file config.rpath [ 30s] Creating directory m4 [ 30s] Copying file m4/codeset.m4 [ 30s] Copying file m4/fcntl-o.m4 [ 30s] Copying file m4/gettext.m4 [ 30s] Copying file m4/glibc2.m4 [ 30s] Copying file m4/glibc21.m4 [ 30s] Copying file m4/iconv.m4 [ 30s] Copying file m4/intdiv0.m4 [ 30s] Copying file m4/intl.m4 [ 30s] Copying file m4/intldir.m4 [ 30s] Copying file m4/intlmacosx.m4 [ 30s] Copying file m4/intmax.m4 [ 30s] Copying file m4/inttypes-pri.m4 [ 30s] Copying file m4/inttypes_h.m4 [ 30s] Copying file m4/lcmessage.m4 [ 30s] Copying file m4/lib-ld.m4 [ 30s] Copying file m4/lib-link.m4 [ 30s] Copying file m4/lib-prefix.m4 [ 30s] Copying file m4/lock.m4 [ 30s] Copying file m4/longlong.m4 [ 30s] Copying file m4/nls.m4 [ 30s] Copying file m4/po.m4 [ 30s] Copying file m4/printf-posix.m4 [ 30s] Copying file m4/progtest.m4 [ 30s] Copying file m4/size_max.m4 [ 30s] Copying file m4/stdint_h.m4 [ 30s] Copying file m4/threadlib.m4 [ 30s] Copying file m4/uintmax_t.m4 [ 30s] Copying file m4/visibility.m4 [ 30s] Copying file m4/wchar_t.m4 [ 30s] Copying file m4/wint_t.m4 [ 30s] Copying file m4/xsize.m4 [ 30s] Copying file po/Makefile.in.in [ 30s] Copying file po/Rules-quot [ 30s] + libtoolize --copy --automake [ 30s] + aclocal -I ./m4 [ 31s] + autoheader [ 32s] + automake --add-missing --copy --include-deps [ 32s] configure.ac:42: warning: The 'AM_PROG_MKDIR_P' macro is deprecated, and its use is discouraged. [ 32s] configure.ac:42: You should use the Autoconf-provided 'AC_PROG_MKDIR_P' macro instead, [ 32s] configure.ac:42: and use '$(MKDIR_P)' instead of '$(mkdir_p)'in your Makefile.am files. [ 32s] configure.ac:29: installing './compile' [ 33s] + autoconf [ 33s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -fvisibility=hidden ' [ 33s] + export CFLAGS [ 33s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -fvisibility=hidden ' [ 33s] + export CXXFLAGS [ 33s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I%_fmoddir' [ 33s] + export FFLAGS [ 33s] + ./configure --build=i686-tizen-linux-gnu --host=i686-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --disable-static [ 33s] checking for a BSD-compatible install... /usr/bin/install -c [ 33s] checking whether build environment is sane... yes [ 33s] /home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/missing: Unknown `--is-lightweight' option [ 33s] Try `/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/missing --help' for more information [ 33s] configure: WARNING: 'missing' script is too old or missing [ 33s] checking for a thread-safe mkdir -p... /usr/bin/mkdir -p [ 33s] checking for gawk... gawk [ 33s] checking whether make sets $(MAKE)... yes [ 33s] checking whether make supports nested variables... yes [ 33s] checking whether make supports nested variables... (cached) yes [ 33s] checking build system type... i686-tizen-linux-gnu [ 33s] checking host system type... i686-tizen-linux-gnu [ 33s] checking how to print strings... printf [ 33s] checking for style of include used by make... GNU [ 33s] checking for i686-tizen-linux-gnu-gcc... no [ 33s] checking for gcc... gcc [ 33s] checking whether the C compiler works... yes [ 33s] checking for C compiler default output file name... a.out [ 33s] checking for suffix of executables... [ 33s] checking whether we are cross compiling... no [ 33s] checking for suffix of object files... o [ 33s] checking whether we are using the GNU C compiler... yes [ 33s] checking whether gcc accepts -g... yes [ 33s] checking for gcc option to accept ISO C89... none needed [ 33s] checking whether gcc understands -c and -o together... yes [ 33s] checking dependency style of gcc... gcc3 [ 34s] checking for a sed that does not truncate output... /usr/bin/sed [ 34s] checking for grep that handles long lines and -e... /usr/bin/grep [ 34s] checking for egrep... /usr/bin/grep -E [ 34s] checking for fgrep... /usr/bin/grep -F [ 34s] checking for ld used by gcc... /usr/i586-tizen-linux-gnu/bin/ld [ 34s] checking if the linker (/usr/i586-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 34s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 34s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 34s] checking whether ln -s works... yes [ 34s] checking the maximum length of command line arguments... 1572864 [ 34s] checking whether the shell understands some XSI constructs... yes [ 34s] checking whether the shell understands "+="... yes [ 34s] checking how to convert i686-tizen-linux-gnu file names to i686-tizen-linux-gnu format... func_convert_file_noop [ 34s] checking how to convert i686-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 34s] checking for /usr/i586-tizen-linux-gnu/bin/ld option to reload object files... -r [ 34s] checking for i686-tizen-linux-gnu-objdump... no [ 34s] checking for objdump... objdump [ 34s] checking how to recognize dependent libraries... pass_all [ 34s] checking for i686-tizen-linux-gnu-dlltool... no [ 34s] checking for dlltool... no [ 34s] checking how to associate runtime and link libraries... printf %s\n [ 34s] checking for i686-tizen-linux-gnu-ar... no [ 34s] checking for ar... ar [ 34s] checking for archiver @FILE support... @ [ 34s] checking for i686-tizen-linux-gnu-strip... no [ 34s] checking for strip... strip [ 34s] checking for i686-tizen-linux-gnu-ranlib... no [ 34s] checking for ranlib... ranlib [ 34s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 34s] checking for sysroot... no [ 34s] checking for i686-tizen-linux-gnu-mt... no [ 34s] checking for mt... no [ 34s] checking if : is a manifest tool... no [ 34s] checking how to run the C preprocessor... gcc -E [ 34s] checking for ANSI C header files... yes [ 34s] checking for sys/types.h... yes [ 34s] checking for sys/stat.h... yes [ 34s] checking for stdlib.h... yes [ 34s] checking for string.h... yes [ 34s] checking for memory.h... yes [ 34s] checking for strings.h... yes [ 34s] checking for inttypes.h... yes [ 34s] checking for stdint.h... yes [ 34s] checking for unistd.h... yes [ 34s] checking for dlfcn.h... yes [ 34s] checking for objdir... .libs [ 34s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 34s] checking for gcc option to produce PIC... -fPIC -DPIC [ 34s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 34s] checking if gcc static flag -static works... no [ 34s] checking if gcc supports -c -o file.o... yes [ 34s] checking if gcc supports -c -o file.o... (cached) yes [ 34s] checking whether the gcc linker (/usr/i586-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 34s] checking whether -lc should be explicitly linked in... no [ 34s] checking dynamic linker characteristics... GNU/Linux ld.so [ 34s] checking how to hardcode library paths into programs... immediate [ 34s] checking for shl_load... no [ 34s] checking for shl_load in -ldld... no [ 34s] checking for dlopen... no [ 34s] checking for dlopen in -ldl... yes [ 35s] checking whether a program can dlopen itself... yes [ 35s] checking whether a statically linked program can dlopen itself... yes [ 35s] checking whether stripping libraries is possible... yes [ 35s] checking if libtool supports shared libraries... yes [ 35s] checking whether to build shared libraries... yes [ 35s] checking whether to build static libraries... no [ 35s] checking which extension is used for runtime loadable modules... .so [ 35s] checking which variable specifies run-time module search path... LD_LIBRARY_PATH [ 35s] checking for the default library search path... /lib /usr/lib /usr/local/lib [ 35s] checking for library containing dlopen... -ldl [ 35s] checking for dlerror... yes [ 35s] checking for shl_load... (cached) no [ 35s] checking for shl_load in -ldld... (cached) no [ 35s] checking for dld_link in -ldld... no [ 35s] checking for _ prefix in compiled symbols... no [ 35s] checking whether deplibs are loaded by dlopen... yes [ 35s] checking for argz.h... yes [ 35s] checking for error_t... yes [ 35s] checking for argz_add... yes [ 35s] checking for argz_append... yes [ 35s] checking for argz_count... yes [ 35s] checking for argz_create_sep... yes [ 35s] checking for argz_insert... yes [ 35s] checking for argz_next... yes [ 35s] checking for argz_stringify... yes [ 35s] checking if argz actually works... yes [ 35s] checking whether libtool supports -dlopen/-dlpreopen... yes [ 35s] checking for ltdl.h... yes [ 35s] checking whether lt_dlinterface_register is declared... yes [ 35s] checking for lt_dladvise_preload in -lltdl... yes [ 35s] checking where to find libltdl headers... [ 35s] checking where to find libltdl library... -lltdl [ 35s] checking for unistd.h... (cached) yes [ 35s] checking for dl.h... no [ 35s] checking for sys/dl.h... no [ 35s] checking for dld.h... no [ 35s] checking for mach-o/dyld.h... no [ 35s] checking for dirent.h... yes [ 35s] checking for closedir... yes [ 35s] checking for opendir... yes [ 35s] checking for readdir... yes [ 36s] checking for strlcat... no [ 36s] checking for strlcpy... no [ 36s] checking for i686-tizen-linux-gnu-g++... no [ 36s] checking for i686-tizen-linux-gnu-c++... no [ 36s] checking for i686-tizen-linux-gnu-gpp... no [ 36s] checking for i686-tizen-linux-gnu-aCC... no [ 36s] checking for i686-tizen-linux-gnu-CC... no [ 36s] checking for i686-tizen-linux-gnu-cxx... no [ 36s] checking for i686-tizen-linux-gnu-cc++... no [ 36s] checking for i686-tizen-linux-gnu-cl.exe... no [ 36s] checking for i686-tizen-linux-gnu-FCC... no [ 36s] checking for i686-tizen-linux-gnu-KCC... no [ 36s] checking for i686-tizen-linux-gnu-RCC... no [ 36s] checking for i686-tizen-linux-gnu-xlC_r... no [ 36s] checking for i686-tizen-linux-gnu-xlC... no [ 36s] checking for g++... g++ [ 36s] checking whether we are using the GNU C++ compiler... yes [ 36s] checking whether g++ accepts -g... yes [ 36s] checking dependency style of g++... gcc3 [ 36s] checking how to run the C++ preprocessor... g++ -E [ 36s] checking for ld used by g++... /usr/i586-tizen-linux-gnu/bin/ld [ 36s] checking if the linker (/usr/i586-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 36s] checking whether the g++ linker (/usr/i586-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 36s] checking for g++ option to produce PIC... -fPIC -DPIC [ 36s] checking if g++ PIC flag -fPIC -DPIC works... yes [ 36s] checking if g++ static flag -static works... no [ 36s] checking if g++ supports -c -o file.o... yes [ 36s] checking if g++ supports -c -o file.o... (cached) yes [ 36s] checking whether the g++ linker (/usr/i586-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 36s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 36s] checking how to hardcode library paths into programs... immediate [ 36s] checking for i686-tizen-linux-gnu-gcc... gcc [ 36s] checking whether we are using the GNU C compiler... (cached) yes [ 36s] checking whether gcc accepts -g... (cached) yes [ 36s] checking for gcc option to accept ISO C89... (cached) none needed [ 36s] checking whether gcc understands -c and -o together... (cached) yes [ 36s] checking dependency style of gcc... (cached) gcc3 [ 36s] checking for an ANSI C-conforming const... yes [ 36s] checking for size_t... yes [ 36s] checking whether NLS is requested... yes [ 36s] checking for msgfmt... /usr/bin/msgfmt [ 36s] checking for gmsgfmt... /usr/bin/msgfmt [ 36s] checking for xgettext... /usr/bin/xgettext [ 36s] checking for msgmerge... /usr/bin/msgmerge [ 36s] checking for ld used by GCC... /usr/i586-tizen-linux-gnu/bin/ld [ 36s] checking if the linker (/usr/i586-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 36s] checking for shared library run path origin... done [ 36s] checking for CFPreferencesCopyAppValue... no [ 36s] checking for CFLocaleCopyCurrent... no [ 36s] checking for GNU gettext in libc... yes [ 36s] checking whether to use NLS... yes [ 36s] checking where the gettext function comes from... libc [ 36s] checking for i686-tizen-linux-gnu-pkg-config... /usr/bin/i686-tizen-linux-gnu-pkg-config [ 36s] checking pkg-config is at least version 0.9.0... yes [ 36s] checking for LIBHANGUL... yes [ 36s] checking for SCIM... yes [ 36s] checking for SCIM_GTKUTILS... no [ 36s] checking for ANSI C header files... (cached) yes [ 36s] checking that generated files are newer than configure... done [ 36s] configure: creating ./config.status [ 37s] config.status: creating Makefile [ 37s] config.status: creating po/Makefile.in [ 37s] config.status: creating src/Makefile [ 37s] config.status: creating data/Makefile [ 37s] config.status: creating scim-hangul.spec [ 37s] config.status: creating config.h [ 37s] config.status: executing depfiles commands [ 37s] config.status: executing libtool commands [ 37s] config.status: executing po-directories commands [ 37s] config.status: creating po/POTFILES [ 37s] config.status: setting ALL_LINGUAS in configure.in is obsolete [ 37s] config.status: creating po/Makefile [ 37s] === configuring in libltdl (/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/libltdl) [ 37s] configure: running /bin/sh ./configure --disable-option-checking '--prefix=/usr' '--build=i686-tizen-linux-gnu' '--host=i686-tizen-linux-gnu' '--program-prefix=' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib' '--libexecdir=/usr/libexec' '--localstatedir=/var' '--sharedstatedir=/usr/com' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--disable-static' 'build_alias=i686-tizen-linux-gnu' 'host_alias=i686-tizen-linux-gnu' 'CFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -fvisibility=hidden ' 'LDFLAGS=' 'CPPFLAGS= -DEXPORTED=__attribute__\(\(visibility\(\"default\"\)\)\)' 'CXXFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -fvisibility=hidden ' --cache-file=/dev/null --srcdir=. [ 37s] checking for a BSD-compatible install... /usr/bin/install -c [ 38s] checking whether build environment is sane... yes [ 38s] checking for a thread-safe mkdir -p... /usr/bin/mkdir -p [ 38s] checking for gawk... gawk [ 38s] checking whether make sets $(MAKE)... yes [ 38s] checking build system type... i686-tizen-linux-gnu [ 38s] checking host system type... i686-tizen-linux-gnu [ 38s] checking how to print strings... printf [ 38s] checking for style of include used by make... GNU [ 38s] checking for i686-tizen-linux-gnu-gcc... no [ 38s] checking for gcc... gcc [ 38s] checking whether the C compiler works... yes [ 38s] checking for C compiler default output file name... a.out [ 38s] checking for suffix of executables... [ 38s] checking whether we are cross compiling... no [ 38s] checking for suffix of object files... o [ 38s] checking whether we are using the GNU C compiler... yes [ 38s] checking whether gcc accepts -g... yes [ 38s] checking for gcc option to accept ISO C89... none needed [ 38s] checking dependency style of gcc... gcc3 [ 38s] checking for a sed that does not truncate output... /usr/bin/sed [ 38s] checking for grep that handles long lines and -e... /usr/bin/grep [ 38s] checking for egrep... /usr/bin/grep -E [ 38s] checking for fgrep... /usr/bin/grep -F [ 39s] checking for ld used by gcc... /usr/i586-tizen-linux-gnu/bin/ld [ 39s] checking if the linker (/usr/i586-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 39s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 39s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 39s] checking whether ln -s works... yes [ 39s] checking the maximum length of command line arguments... 1572864 [ 39s] checking whether the shell understands some XSI constructs... yes [ 39s] checking whether the shell understands "+="... yes [ 39s] checking how to convert i686-tizen-linux-gnu file names to i686-tizen-linux-gnu format... func_convert_file_noop [ 39s] checking how to convert i686-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 39s] checking for /usr/i586-tizen-linux-gnu/bin/ld option to reload object files... -r [ 39s] checking for i686-tizen-linux-gnu-objdump... no [ 39s] checking for objdump... objdump [ 39s] checking how to recognize dependent libraries... pass_all [ 39s] checking for i686-tizen-linux-gnu-dlltool... no [ 39s] checking for dlltool... no [ 39s] checking how to associate runtime and link libraries... printf %s\n [ 39s] checking for i686-tizen-linux-gnu-ar... no [ 39s] checking for ar... ar [ 39s] checking for archiver @FILE support... @ [ 39s] checking for i686-tizen-linux-gnu-strip... no [ 39s] checking for strip... strip [ 39s] checking for i686-tizen-linux-gnu-ranlib... no [ 39s] checking for ranlib... ranlib [ 39s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 39s] checking for sysroot... no [ 39s] checking for i686-tizen-linux-gnu-mt... no [ 39s] checking for mt... no [ 39s] checking if : is a manifest tool... no [ 39s] checking how to run the C preprocessor... gcc -E [ 39s] checking for ANSI C header files... yes [ 39s] checking for sys/types.h... yes [ 39s] checking for sys/stat.h... yes [ 39s] checking for stdlib.h... yes [ 39s] checking for string.h... yes [ 39s] checking for memory.h... yes [ 39s] checking for strings.h... yes [ 39s] checking for inttypes.h... yes [ 39s] checking for stdint.h... yes [ 39s] checking for unistd.h... yes [ 39s] checking for dlfcn.h... yes [ 39s] checking for objdir... .libs [ 39s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 39s] checking for gcc option to produce PIC... -fPIC -DPIC [ 39s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 39s] checking if gcc static flag -static works... no [ 39s] checking if gcc supports -c -o file.o... yes [ 39s] checking if gcc supports -c -o file.o... (cached) yes [ 39s] checking whether the gcc linker (/usr/i586-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 39s] checking whether -lc should be explicitly linked in... no [ 39s] checking dynamic linker characteristics... GNU/Linux ld.so [ 39s] checking how to hardcode library paths into programs... immediate [ 39s] checking for shl_load... no [ 39s] checking for shl_load in -ldld... no [ 39s] checking for dlopen... no [ 40s] checking for dlopen in -ldl... yes [ 40s] checking whether a program can dlopen itself... yes [ 40s] checking whether a statically linked program can dlopen itself... yes [ 40s] checking whether stripping libraries is possible... yes [ 40s] checking if libtool supports shared libraries... yes [ 40s] checking whether to build shared libraries... yes [ 40s] checking whether to build static libraries... no [ 40s] checking which extension is used for runtime loadable modules... .so [ 40s] checking which variable specifies run-time module search path... LD_LIBRARY_PATH [ 40s] checking for the default library search path... /lib /usr/lib /usr/local/lib [ 40s] checking for library containing dlopen... -ldl [ 40s] checking for dlerror... yes [ 40s] checking for shl_load... (cached) no [ 40s] checking for shl_load in -ldld... (cached) no [ 40s] checking for dld_link in -ldld... no [ 40s] checking for _ prefix in compiled symbols... no [ 40s] checking whether deplibs are loaded by dlopen... yes [ 40s] checking for argz.h... yes [ 40s] checking for error_t... yes [ 40s] checking for argz_add... yes [ 40s] checking for argz_append... yes [ 40s] checking for argz_count... yes [ 40s] checking for argz_create_sep... yes [ 40s] checking for argz_insert... yes [ 40s] checking for argz_next... yes [ 40s] checking for argz_stringify... yes [ 40s] checking if argz actually works... yes [ 40s] checking whether libtool supports -dlopen/-dlpreopen... yes [ 40s] checking for unistd.h... (cached) yes [ 40s] checking for dl.h... no [ 40s] checking for sys/dl.h... no [ 40s] checking for dld.h... no [ 40s] checking for mach-o/dyld.h... no [ 40s] checking for dirent.h... yes [ 40s] checking for closedir... yes [ 40s] checking for opendir... yes [ 40s] checking for readdir... yes [ 40s] checking for strlcat... no [ 41s] checking for strlcpy... no [ 41s] configure: creating ./config.status [ 41s] config.status: creating Makefile [ 41s] config.status: creating config.h [ 41s] config.status: executing depfiles commands [ 41s] config.status: executing libtool commands [ 41s] + make -j4 [ 41s] make all-recursive [ 41s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10' [ 41s] Making all in src [ 41s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/src' [ 41s] /bin/sh ../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I.. -DEXPORTED=__attribute__\(\(visibility\(\"default\"\)\)\) -I/usr/include/scim-1.0 -I/usr/include/hangul-1.0 -DSCIM_ICONDIR=\"/usr/share/scim/icons\" -DSCIM_HANGUL_LOCALEDIR=\"/usr/share/locale\" -DSCIM_HANGUL_DATADIR=\"/usr/share/scim/hangul\" -DSCIM_HANGUL_ICON_FILE=\"/usr/share/scim/icons/scim-hangul.png\" -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -fvisibility=hidden -MT hangul_la-scim_hangul_imengine.lo -MD -MP -MF .deps/hangul_la-scim_hangul_imengine.Tpo -c -o hangul_la-scim_hangul_imengine.lo `test -f 'scim_hangul_imengine.cpp' || echo './'`scim_hangul_imengine.cpp [ 41s] libtool: compile: g++ -DHAVE_CONFIG_H -I. -I.. "-DEXPORTED=__attribute__((visibility(\"default\")))" -I/usr/include/scim-1.0 -I/usr/include/hangul-1.0 -DSCIM_ICONDIR=\"/usr/share/scim/icons\" -DSCIM_HANGUL_LOCALEDIR=\"/usr/share/locale\" -DSCIM_HANGUL_DATADIR=\"/usr/share/scim/hangul\" -DSCIM_HANGUL_ICON_FILE=\"/usr/share/scim/icons/scim-hangul.png\" -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -fvisibility=hidden -MT hangul_la-scim_hangul_imengine.lo -MD -MP -MF .deps/hangul_la-scim_hangul_imengine.Tpo -c scim_hangul_imengine.cpp -fPIC -DPIC -o .libs/hangul_la-scim_hangul_imengine.o [ 43s] mv -f .deps/hangul_la-scim_hangul_imengine.Tpo .deps/hangul_la-scim_hangul_imengine.Plo [ 43s] /bin/sh ../libtool --tag=CXX --mode=link g++ -I/usr/include/scim-1.0 -I/usr/include/hangul-1.0 -DSCIM_ICONDIR=\"/usr/share/scim/icons\" -DSCIM_HANGUL_LOCALEDIR=\"/usr/share/locale\" -DSCIM_HANGUL_DATADIR=\"/usr/share/scim/hangul\" -DSCIM_HANGUL_ICON_FILE=\"/usr/share/scim/icons/scim-hangul.png\" -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -fvisibility=hidden -avoid-version -rpath /usr/lib/scim-1.0/1.4.0/IMEngine -module -export-symbols-regex "^[^_].*" -lscim-1.0 -lhangul -o hangul.la -rpath /usr/lib/scim-1.0/1.4.0/IMEngine hangul_la-scim_hangul_imengine.lo -ldl [ 43s] libtool: link: /usr/bin/nm -B .libs/hangul_la-scim_hangul_imengine.o | sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' | sed '/ __gnu_lto/d' | /usr/bin/sed 's/.* //' | sort | uniq > .libs/hangul.exp [ 43s] libtool: link: /usr/bin/grep -E -e "^[^_].*" ".libs/hangul.exp" > ".libs/hangul.expT" [ 43s] libtool: link: mv -f ".libs/hangul.expT" ".libs/hangul.exp" [ 43s] libtool: link: g++ -fPIC -DPIC -shared -nostdlib /usr/lib/gcc/i586-tizen-linux-gnu/4.9.2/../../../crti.o /usr/lib/gcc/i586-tizen-linux-gnu/4.9.2/crtbeginS.o .libs/hangul_la-scim_hangul_imengine.o -Wl,--as-needed -lscim-1.0 -lhangul -ldl -L/usr/lib/gcc/i586-tizen-linux-gnu/4.9.2 -L/usr/lib/gcc/i586-tizen-linux-gnu/4.9.2/../../../../i586-tizen-linux-gnu/lib -L/usr/lib/gcc/i586-tizen-linux-gnu/4.9.2/../../.. -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/i586-tizen-linux-gnu/4.9.2/crtendS.o /usr/lib/gcc/i586-tizen-linux-gnu/4.9.2/../../../crtn.o -O2 -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -Wl,-soname -Wl,hangul.so -Wl,-retain-symbols-file -Wl,.libs/hangul.exp -o .libs/hangul.so [ 43s] libtool: link: ( cd ".libs" && rm -f "hangul.la" && ln -s "../hangul.la" "hangul.la" ) [ 43s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/src' [ 43s] Making all in data [ 43s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/data' [ 43s] make[2]: Nothing to be done for 'all'. [ 43s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/data' [ 43s] Making all in po [ 43s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/po' [ 43s] test ! -f ./scim-hangul.pot || \ [ 43s] test -z "de.gmo fr.gmo ja.gmo ko.gmo nl.gmo pa.gmo zh_CN.gmo" || make de.gmo fr.gmo ja.gmo ko.gmo nl.gmo pa.gmo zh_CN.gmo [ 43s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/po' [ 43s] rm -f de.gmo && /usr/bin/msgfmt -c --statistics --verbose -o de.gmo de.po [ 43s] rm -f ko.gmo && /usr/bin/msgfmt -c --statistics --verbose -o ko.gmo ko.po [ 43s] rm -f fr.gmo && /usr/bin/msgfmt -c --statistics --verbose -o fr.gmo fr.po [ 43s] rm -f ja.gmo && /usr/bin/msgfmt -c --statistics --verbose -o ja.gmo ja.po [ 43s] de.po: 9 translated messages, 6 fuzzy translations, 12 untranslated messages. [ 43s] ko.po: 27 translated messages. [ 43s] ja.po: 9 translated messages, 8 fuzzy translations, 10 untranslated messages. [ 43s] fr.po: 9 translated messages, 6 fuzzy translations, 12 untranslated messages. [ 43s] rm -f nl.gmo && /usr/bin/msgfmt -c --statistics --verbose -o nl.gmo nl.po [ 43s] rm -f pa.gmo && /usr/bin/msgfmt -c --statistics --verbose -o pa.gmo pa.po [ 43s] rm -f zh_CN.gmo && /usr/bin/msgfmt -c --statistics --verbose -o zh_CN.gmo zh_CN.po [ 43s] nl.po: 27 translated messages. [ 43s] pa.po: 9 translated messages, 6 fuzzy translations, 12 untranslated messages. [ 43s] zh_CN.po: 8 translated messages, 9 fuzzy translations, 10 untranslated messages. [ 43s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/po' [ 43s] touch stamp-po [ 43s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/po' [ 43s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10' [ 43s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10' [ 43s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10' [ 43s] + exit 0 [ 43s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.3RsJ56 [ 43s] + umask 022 [ 43s] + cd /home/abuild/rpmbuild/BUILD [ 43s] + cd ise-engine-hangul-1.0.10 [ 43s] + LANG=C [ 43s] + export LANG [ 43s] + unset DISPLAY [ 43s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-1.1.i386 [ 43s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-1.1.i386 [ 43s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-1.1.i386 [ 43s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-1.1.i386 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-1.1.i386 install [ 43s] Making install in src [ 43s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/src' [ 43s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/src' [ 43s] make[2]: Nothing to be done for 'install-exec-am'. [ 43s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-1.1.i386/usr/lib/scim-1.0/1.4.0/IMEngine' [ 43s] /bin/sh ../libtool --mode=install /usr/bin/install -c hangul.la '/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-1.1.i386/usr/lib/scim-1.0/1.4.0/IMEngine' [ 43s] libtool: install: /usr/bin/install -c .libs/hangul.so /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-1.1.i386/usr/lib/scim-1.0/1.4.0/IMEngine/hangul.so [ 43s] libtool: install: /usr/bin/install -c .libs/hangul.lai /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-1.1.i386/usr/lib/scim-1.0/1.4.0/IMEngine/hangul.la [ 43s] libtool: install: warning: remember to run `libtool --finish /usr/lib/scim-1.0/1.4.0/IMEngine' [ 43s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/src' [ 43s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/src' [ 43s] Making install in data [ 43s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/data' [ 43s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/data' [ 43s] make[2]: Nothing to be done for 'install-exec-am'. [ 43s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-1.1.i386/usr/share/scim/icons' [ 43s] /usr/bin/install -c -m 644 scim-hangul.png scim-hangul-on.png scim-hangul-off.png '/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-1.1.i386/usr/share/scim/icons' [ 43s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-1.1.i386/usr/share/scim/hangul' [ 43s] /usr/bin/install -c -m 644 symbol.txt '/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-1.1.i386/usr/share/scim/hangul' [ 43s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/data' [ 43s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/data' [ 43s] Making install in po [ 43s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/po' [ 43s] installing de.gmo as /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-1.1.i386/usr/share/locale/de/LC_MESSAGES/scim-hangul.mo [ 43s] installing fr.gmo as /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-1.1.i386/usr/share/locale/fr/LC_MESSAGES/scim-hangul.mo [ 43s] installing ja.gmo as /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-1.1.i386/usr/share/locale/ja/LC_MESSAGES/scim-hangul.mo [ 43s] installing ko.gmo as /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-1.1.i386/usr/share/locale/ko/LC_MESSAGES/scim-hangul.mo [ 43s] installing nl.gmo as /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-1.1.i386/usr/share/locale/nl/LC_MESSAGES/scim-hangul.mo [ 43s] installing pa.gmo as /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-1.1.i386/usr/share/locale/pa/LC_MESSAGES/scim-hangul.mo [ 43s] installing zh_CN.gmo as /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-1.1.i386/usr/share/locale/zh_CN/LC_MESSAGES/scim-hangul.mo [ 43s] if test "scim-hangul" = "gettext-tools"; then \ [ 43s] /usr/bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-1.1.i386/usr/share/gettext/po; \ [ 43s] for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ [ 43s] /usr/bin/install -c -m 644 ./$file \ [ 43s] /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-1.1.i386/usr/share/gettext/po/$file; \ [ 43s] done; \ [ 43s] for file in Makevars; do \ [ 43s] rm -f /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-1.1.i386/usr/share/gettext/po/$file; \ [ 43s] done; \ [ 43s] else \ [ 43s] : ; \ [ 43s] fi [ 43s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/po' [ 43s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10' [ 43s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10' [ 43s] make[2]: Nothing to be done for 'install-exec-am'. [ 43s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-1.1.i386/usr/share/packages' [ 43s] /usr/bin/install -c -m 644 hangul.xml '/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-1.1.i386/usr/share/packages' [ 43s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10' [ 43s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10' [ 43s] + rm -f /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-1.1.i386/usr/share/info/dir [ 43s] + find /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-1.1.i386 -regex '.*\.la$' [ 43s] + xargs rm -f -- [ 43s] + find /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-1.1.i386 -regex '.*\.a$' [ 43s] + xargs rm -f -- [ 43s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10 [ 43s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-1.1.i386/usr/lib/scim-1.0/1.4.0/IMEngine/hangul.so [ 43s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 43s] cpio: glibc-2.20/sysdeps/i386/crti.S: Cannot stat: No such file or directory [ 43s] cpio: glibc-2.20/sysdeps/i386/crtn.S: Cannot stat: No such file or directory [ 43s] 59 blocks [ 43s] + /usr/lib/rpm/check-buildroot [ 43s] + /usr/lib/rpm//brp-compress [ 43s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 43s] + /usr/lib/rpm/brp-python-hardlink [ 43s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-1.1.i386 [ 43s] Processing files: ise-engine-hangul-1.0.10-1.1.i686 [ 43s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 43s] cmVxdWVzdD4KPGFzc2lnbj4KICAgIDxmaWxlc3lzdGVtIHBhdGg9Ii91c3IvYmlu [ 43s] LyoiIGV4ZWNfbGFiZWw9Im5vbmUiIC8+CjwvYXNzaWduPgo8L21hbmlmZXN0Pgo= [ 43s] [ 43s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.ZHotyN [ 43s] + umask 022 [ 43s] + cd /home/abuild/rpmbuild/BUILD [ 43s] + cd ise-engine-hangul-1.0.10 [ 43s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-1.1.i386/usr/share/licenses/ise-engine-hangul [ 43s] + export LICENSEDIR [ 43s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-1.1.i386/usr/share/licenses/ise-engine-hangul [ 43s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-1.1.i386/usr/share/licenses/ise-engine-hangul [ 43s] + exit 0 [ 43s] Provides: hangul.so ise-engine-hangul = 1.0.10-1.1 ise-engine-hangul(x86-32) = 1.0.10-1.1 [ 43s] Requires(interp): /bin/sh /bin/sh [ 43s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 43s] Requires(post): /bin/sh [ 43s] Requires(postun): /bin/sh [ 43s] Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.2) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.0) libhangul.so.1 libscim-1.0.so.8 libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(GLIBCXX_3.4) libstdc++.so.6(GLIBCXX_3.4.9) [ 43s] Processing files: ise-engine-hangul-debugsource-1.0.10-1.1.i686 [ 43s] Provides: ise-engine-hangul-debugsource = 1.0.10-1.1 ise-engine-hangul-debugsource(x86-32) = 1.0.10-1.1 [ 43s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 43s] Processing files: ise-engine-hangul-debuginfo-1.0.10-1.1.i686 [ 43s] Provides: ise-engine-hangul-debuginfo = 1.0.10-1.1 ise-engine-hangul-debuginfo(x86-32) = 1.0.10-1.1 [ 43s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 43s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-1.1.i386 [ 43s] Wrote: /home/abuild/rpmbuild/SRPMS/ise-engine-hangul-1.0.10-1.1.src.rpm [ 43s] XZ: Adjusted the number of threads from 36 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/ise-engine-hangul-1.0.10-1.1.i686.rpm [ 43s] XZ: Adjusted the number of threads from 36 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/ise-engine-hangul-debugsource-1.0.10-1.1.i686.rpm [ 43s] XZ: Adjusted the number of threads from 36 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/ise-engine-hangul-debuginfo-1.0.10-1.1.i686.rpm [ 43s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.khoPSf [ 43s] + umask 022 [ 43s] + cd /home/abuild/rpmbuild/BUILD [ 43s] + cd ise-engine-hangul-1.0.10 [ 43s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-1.1.i386 [ 43s] + exit 0 [ 43s] ... checking for files with abuild user/group [ 43s] ... creating baselibs [ 44s] [ 44s] obsnw17 finished "build ise-engine-hangul.spec" at Sun Apr 23 02:13:51 UTC 2017. [ 44s] Retried build at Mon May 8 15:49:03 2017 returned same result, skipped Retried build at Wed May 10 18:41:18 2017 returned same result, skipped Retried build at Thu May 11 17:56:41 2017 returned same result, skipped Retried build at Mon May 15 15:17:08 2017 returned same result, skipped Retried build at Tue May 16 15:46:23 2017 returned same result, skipped Retried build at Thu May 18 16:52:07 2017 returned same result, skipped Retried build at Fri May 19 19:01:48 2017 returned same result, skipped Retried build at Tue May 23 13:16:11 2017 returned same result, skipped Retried build at Wed May 24 13:06:02 2017 returned same result, skipped Retried build at Thu May 25 12:51:34 2017 returned same result, skipped Retried build at Fri May 26 10:36:00 2017 returned same result, skipped Retried build at Fri May 26 11:35:46 2017 returned same result, skipped Retried build at Tue May 30 10:52:01 2017 returned same result, skipped Retried build at Wed May 31 14:44:30 2017 returned same result, skipped Retried build at Thu Jun 1 11:20:44 2017 returned same result, skipped Retried build at Fri Jun 2 15:26:55 2017 returned same result, skipped Retried build at Mon Jun 5 13:02:00 2017 returned same result, skipped Retried build at Thu Jun 8 12:17:17 2017 returned same result, skipped Retried build at Fri Jun 9 08:50:30 2017 returned same result, skipped Retried build at Mon Jun 12 12:29:41 2017 returned same result, skipped Retried build at Wed Jun 14 03:40:51 2017 returned same result, skipped Retried build at Wed Jun 14 13:03:47 2017 returned same result, skipped Retried build at Fri Jun 16 07:09:44 2017 returned same result, skipped Retried build at Mon Jun 19 13:48:51 2017 returned same result, skipped Retried build at Tue Jun 20 12:47:15 2017 returned same result, skipped Retried build at Tue Jun 27 12:37:43 2017 returned same result, skipped Retried build at Fri Jun 30 14:35:31 2017 returned same result, skipped Retried build at Fri Jun 30 15:00:49 2017 returned same result, skipped Retried build at Wed Jul 5 07:53:53 2017 returned same result, skipped Retried build at Wed Jul 5 08:07:23 2017 returned same result, skipped Retried build at Thu Jul 6 10:34:30 2017 returned same result, skipped Retried build at Fri Jul 7 09:32:14 2017 returned same result, skipped Retried build at Tue Jul 11 10:22:18 2017 returned same result, skipped Retried build at Wed Jul 12 07:38:56 2017 returned same result, skipped Retried build at Wed Jul 12 09:04:41 2017 returned same result, skipped Retried build at Fri Jul 14 04:45:16 2017 returned same result, skipped Retried build at Fri Jul 14 18:05:10 2017 returned same result, skipped Retried build at Mon Jul 17 11:24:37 2017 returned same result, skipped Retried build at Wed Jul 19 08:36:32 2017 returned same result, skipped Retried build at Thu Jul 20 14:21:38 2017 returned same result, skipped Retried build at Fri Jul 21 12:08:31 2017 returned same result, skipped Retried build at Mon Jul 24 05:12:00 2017 returned same result, skipped Retried build at Mon Jul 24 09:46:03 2017 returned same result, skipped Retried build at Fri Jul 28 15:50:36 2017 returned same result, skipped Retried build at Mon Jul 31 13:35:52 2017 returned same result, skipped Retried build at Tue Aug 1 16:35:51 2017 returned same result, skipped Retried build at Thu Aug 3 14:23:55 2017 returned same result, skipped Retried build at Fri Aug 4 06:53:11 2017 returned same result, skipped Retried build at Tue Aug 8 13:39:10 2017 returned same result, skipped Retried build at Tue Aug 8 14:13:56 2017 returned same result, skipped Retried build at Thu Aug 10 12:28:57 2017 returned same result, skipped Retried build at Fri Aug 11 13:32:31 2017 returned same result, skipped Retried build at Wed Aug 16 02:15:15 2017 returned same result, skipped Retried build at Wed Aug 16 15:09:39 2017 returned same result, skipped Retried build at Thu Aug 17 13:42:52 2017 returned same result, skipped Retried build at Fri Aug 18 11:43:11 2017 returned same result, skipped Retried build at Mon Aug 21 09:44:27 2017 returned same result, skipped Retried build at Thu Aug 24 15:24:33 2017 returned same result, skipped Retried build at Fri Aug 25 07:15:25 2017 returned same result, skipped Retried build at Mon Aug 28 11:38:17 2017 returned same result, skipped Retried build at Tue Sep 12 18:50:42 2017 returned same result, skipped Retried build at Fri Oct 13 19:18:32 2017 returned same result, skipped Retried build at Thu Oct 19 14:17:48 2017 returned same result, skipped Retried build at Thu Oct 26 15:41:14 2017 returned same result, skipped Retried build at Wed Nov 8 00:17:22 2017 returned same result, skipped Retried build at Wed Nov 8 10:00:25 2017 returned same result, skipped Retried build at Wed Nov 29 08:46:22 2017 returned same result, skipped Retried build at Tue Dec 5 09:23:01 2017 returned same result, skipped Retried build at Thu Dec 14 10:27:55 2017 returned same result, skipped Retried build at Tue Apr 24 12:59:42 2018 returned same result, skipped Retried build at Thu Jun 14 11:41:28 2018 returned same result, skipped Retried build at Mon Jul 2 11:01:46 2018 returned same result, skipped Retried build at Fri Jul 13 16:03:27 2018 returned same result, skipped Retried build at Thu Oct 18 12:43:13 2018 returned same result, skipped Retried build at Fri May 17 01:35:16 2019 returned same result, skipped