[ 0s] Memory limit set to 82442244KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obspw06 started "build _service:gbs:GUPnP-AV.spec" at Sat Apr 22 21:47:29 UTC 2017. [ 0s] [ 0s] Building GUPnP-AV for project 'Tizen:3.0:IVI' repository 'arm' arch 'armv7l' srcmd5 'b54251e6bd58b6c8cd7a78eebe51f78d' [ 0s] [ 0s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:GUPnP-AV.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:GUPnP-AV.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:GUPnP-AV.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] interpreter for 'aarch64' is -1 [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling setup... [ 1s] [3/40] preinstalling filesystem... [ 1s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling libgcc... [ 1s] [6/40] preinstalling bash... [ 1s] [7/40] preinstalling diffutils... [ 1s] [8/40] preinstalling grep... [ 1s] [9/40] preinstalling libattr... [ 1s] [10/40] preinstalling libbz2... [ 1s] [11/40] preinstalling libcap... [ 1s] [12/40] preinstalling libelf... [ 1s] [13/40] preinstalling libfreebl3... [ 1s] [14/40] preinstalling liblua... [ 1s] [15/40] preinstalling liblzma... [ 1s] [16/40] preinstalling libncurses... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libsmack... [ 1s] [19/40] preinstalling libsqlite... [ 1s] [20/40] preinstalling libuuid... [ 1s] [21/40] preinstalling nspr... [ 1s] [22/40] preinstalling sed... [ 1s] [23/40] preinstalling zlib... [ 1s] [24/40] preinstalling qemu-accel-x86_64-armv7l... [ 5s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 5s] [26/40] preinstalling coreutils... [ 5s] [27/40] preinstalling libacl... [ 5s] [28/40] preinstalling libblkid... [ 5s] [29/40] preinstalling libreadline... [ 5s] [30/40] preinstalling smack... [ 6s] [31/40] preinstalling bzip2... [ 6s] [32/40] preinstalling libmagic... [ 6s] [33/40] preinstalling libxml2... [ 6s] [34/40] preinstalling libmount... [ 6s] [35/40] preinstalling tar... [ 6s] [36/40] preinstalling util-linux... [ 6s] [37/40] preinstalling util-linux-su... [ 6s] [38/40] preinstalling nss... [ 6s] [39/40] preinstalling libsoftokn3... [ 6s] [40/40] preinstalling rpm... [ 6s] [ 6s] running qemu-linux-user-x86_64-cross postinstall script [ 6s] running qemu-accel-x86_64-armv7l postinstall script [ 6s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/liblto_plugin.so': No such file or directory [ 6s] running setup postinstall script [ 6s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 6s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 6s] initializing rpm db... [ 6s] reordering...cycle: gio-branding-upstream -> libgio [ 6s] breaking dependency libgio -> gio-branding-upstream [ 6s] cycle: girepository -> libgirepository [ 6s] breaking dependency libgirepository -> girepository [ 6s] cycle: libsoftokn3 -> nss [ 6s] breaking dependency nss -> libsoftokn3 [ 6s] done [ 7s] [1/147] installing default-ac-domains-0.1-1.1 [ 7s] [2/147] installing libmagic-data-5.28-1.19 [ 7s] [3/147] installing setup-0.9-1.8 [ 7s] [4/147] installing terminfo-base-5.9-1.21 [ 7s] [5/147] installing filesystem-3.1-1.2 [ 7s] [6/147] installing glibc-2.20-1.2 [ 7s] [7/147] installing libatomic-4.9.2-1.6 [ 7s] [8/147] installing libgcc-4.9.2-1.6 [ 7s] [9/147] installing libgomp-4.9.2-1.6 [ 7s] [10/147] installing bash-3.2.57-2.1 [ 7s] [11/147] installing cpio-2.11-1.3 [ 7s] [12/147] installing diffutils-3.3-1.3 [ 7s] [13/147] installing findutils-4.3.8-1.22 [ 7s] [14/147] installing hostname-3.12-1.3 [ 7s] [15/147] installing libattr-2.4.47-1.21 [ 7s] [16/147] installing libbz2-1.0.6-1.43 [ 7s] [17/147] installing libcap-2.24-1.21 [ 7s] [18/147] installing libelf-0.153-1.25 [ 7s] [19/147] installing libelf0-0.8.13-1.3 [ 7s] [20/147] installing libexpat-2.2.0-1.20 [ 7s] [21/147] installing libext2fs-1.42.13-1.2 [ 8s] [22/147] installing libffi-3.1-1.3 [ 8s] [23/147] installing libfreebl3-3.23-1.37 [ 8s] [24/147] installing libgmp-4.2.1-1.3 [ 8s] [25/147] installing libitm-4.9.2-1.6 [ 8s] [26/147] installing libltdl-2.4.2-1.25 [ 8s] [27/147] installing liblua-5.1.4-1.5 [ 8s] [28/147] installing liblzma-5.2.2-1.19 [ 8s] [29/147] installing libnettle-2.7.1-1.1 [ 8s] [30/147] installing libpcre-8.39-1.3 [ 8s] [31/147] installing libpopt-1.16-1.5 [ 8s] [32/147] installing libpython-2.7.8-1.11 [ 8s] [33/147] installing libsmack-1.3.0-1.20 [ 8s] [34/147] installing libsmartcols-2.28-1.3 [ 8s] [35/147] installing libsqlite-3.8.10.2-1.5 [ 8s] [36/147] installing libstdc++-4.9.2-1.6 [ 8s] [37/147] installing libtasn1-4.8-1.1 [ 8s] [38/147] installing libuuid-2.28-1.3 [ 8s] [39/147] installing m4-1.4.17-1.3 [ 9s] [40/147] installing net-tools-2.0_20121208git-1.3 [ 9s] [41/147] installing nspr-4.12-1.10 [ 9s] [42/147] installing patch-2.7-1.5 [ 9s] [43/147] installing pkg-config-0.28-1.24 [ 9s] [44/147] installing sed-4.1c-1.3 [ 9s] [45/147] installing update-alternatives-1.16.3-1.3 [ 9s] [46/147] installing which-2.20-1.3 [ 9s] [47/147] installing zlib-1.2.8-1.25 [ 9s] [48/147] installing libncurses-5.9-1.21 [ 9s] [49/147] installing libncurses6-5.9-1.21 [ 9s] [50/147] installing shadow-utils-4.1.4.2-1.2 [ 9s] [51/147] installing build-compare-2015.04.28-1.16 [ 9s] [52/147] installing libstdc++-devel-4.9.2-1.6 [ 9s] [53/147] installing qemu-linux-user-x86_64-cross-2.7.0-1.4.1 [ 10s] [54/147] installing cpp-4.9.2-1.6 [ 11s] [55/147] installing gcc-c++-4.9.2-1.6 [ 11s] [56/147] installing libffi-devel-3.1-1.3 [ 11s] [57/147] installing xz-devel-5.2.2-1.19 [ 11s] [58/147] installing binutils-2.25-1.11 [ 12s] [59/147] installing coreutils-6.9-1.3 [ 12s] [60/147] installing db4-4.8.30.NC-1.28 [ 12s] [61/147] installing gawk-3.1.5-1.3 [ 12s] [62/147] installing grep-2.5.2-1.3 [ 12s] [63/147] installing less-466-1.3 [ 12s] [64/147] installing libacl-2.2.52-1.22 [ 12s] [65/147] installing libasm-0.153-1.25 [ 12s] [66/147] installing libblkid-2.28-1.3 [ 12s] [67/147] installing libcap-tools-2.24-1.21 [ 12s] [68/147] installing libglib-2.44.1-1.1 [ 12s] [69/147] installing libopenssl-1.0.2j-1.22 [ 12s] [70/147] installing libpcreposix-8.39-1.3 [ 12s] [71/147] installing libreadline-5.2-1.20 [ 12s] [72/147] installing libubsan-4.9.2-1.6 [ 13s] [73/147] installing make-4.0-1.5 [ 13s] [74/147] installing nss-certs-3.23-1.37 [ 13s] [75/147] installing smack-1.3.0-1.20 [ 13s] [76/147] installing bzip2-1.0.6-1.43 [ 13s] [77/147] installing libhogweed-2.7.1-1.1 [ 13s] [78/147] installing libmagic-5.28-1.19 [ 13s] [79/147] installing libpcrecpp-8.39-1.3 [ 13s] [80/147] installing libxml2-2.9.4-2.17 [ 13s] [81/147] installing xz-5.2.2-1.19 [ 13s] [82/147] installing cynara-db-migration-0.14.10-1.1 [ 13s] [83/147] installing libdw-0.153-1.25 [ 13s] [84/147] installing ncurses-devel-5.9-1.21 [ 13s] [85/147] installing linux-glibc-devel-3.10-1.26 [ 13s] [86/147] installing readline-devel-5.2-1.20 [ 13s] [87/147] installing file-5.28-1.19 [ 13s] [88/147] installing glibc-locale-2.20-1.2 [ 14s] [89/147] installing libgmodule-2.44.1-1.1 [ 14s] [90/147] installing libgthread-2.44.1-1.1 [ 14s] [91/147] installing libmount-2.28-1.3 [ 14s] [92/147] installing security-config-1.0-1.1 [ 21s] usermod: user 'buxton' does not exist [ 21s] usermod: user 'dbus' does not exist [ 21s] [93/147] installing tar-1.17-1.3 [ 21s] [94/147] installing gzip-1.3.12-1.21 [ 21s] [95/147] installing libfdisk1-2.28-1.3 [ 21s] [96/147] installing libgobject-2.44.1-1.1 [ 21s] [97/147] installing libxml2-tools-2.9.4-2.17 [ 21s] [98/147] installing pam-1.1.6-1.2 [ 21s] [99/147] installing perl-5.20.0-1.27 [ 22s] [100/147] installing tzdata-2016i-1.1 [ 22s] [101/147] installing pcre-devel-8.39-1.3 [ 22s] [102/147] installing elfutils-0.153-1.25 [ 22s] [103/147] installing gcc-4.9.2-1.6 [ 23s] [104/147] installing libcynara-commons-0.14.10-1.1 [ 23s] [105/147] installing libgnutls-3.3.5-2.1 [ 23s] [106/147] installing shared-mime-info-1.3-2.1 [ 29s] [107/147] installing python-2.7.8-1.11 [ 30s] [108/147] installing build-mkbaselibs-20120927-1.3 [ 30s] [109/147] installing ca-certificates-0.0.4-1.1 [ 30s] [110/147] installing glibc-devel-2.20-1.2 [ 30s] [111/147] installing qemu-accel-x86_64-armv7l-0.4-1.2 [ 34s] [112/147] installing autoconf-2.69-1.28 [ 35s] [113/147] installing libcynara-client-0.14.10-1.1 [ 35s] [114/147] installing libcynara-session-0.14.10-1.1 [ 35s] [115/147] installing libvala-0.26.1-1.1 [ 35s] [116/147] installing python-xml-2.7.8-1.11 [ 35s] [117/147] installing libsystemd-219-2.1 [ 35s] [118/147] installing util-linux-2.28-1.3 [ 35s] [119/147] installing zlib-devel-1.2.8-1.25 [ 35s] [120/147] installing automake-1.14.1-1.23 [ 35s] [121/147] installing dbus-libs-1.10.6-1.1 [ 35s] [122/147] installing util-linux-su-2.28-1.3 [ 35s] [123/147] installing build-20120927-1.3 [ 35s] [124/147] installing libdlog-0.5.1-2.1 [ 35s] [125/147] installing vala-0.26.1-1.1 [ 36s] update-alternatives: using /usr/bin/vala-0.26 to provide /usr/bin/vala (vala) in auto mode. [ 36s] [126/147] installing libtool-2.4.2-1.25 [ 36s] [127/147] installing libxml2-devel-2.9.4-2.17 [ 36s] [128/147] installing dbus-1.10.6-1.1 [ 36s] [129/147] installing nss-3.23-1.37 [ 36s] [130/147] installing libgio-2.44.1-1.1 [ 36s] [131/147] installing gio-branding-upstream-2.44.1-1.1 [ 36s] [132/147] installing libsoftokn3-3.23-1.37 [ 36s] [133/147] installing glib2-tools-2.44.1-1.1 [ 36s] [134/147] installing glib-networking-2.38.0-1.1 [ 36s] [135/147] installing libgirepository-1.36.0-1.1 [ 36s] [136/147] installing rpm-4.11.0.1-1.14 [ 36s] [137/147] installing girepository-1.36.0-1.1 [ 36s] [138/147] installing libsoup-2.46.0-1.1 [ 37s] [139/147] installing gobject-introspection-1.36.0-1.1 [ 37s] [140/147] installing glib2-devel-2.44.1-1.1 [ 37s] [141/147] installing rpm-build-4.11.0.1-1.14 [ 37s] [142/147] installing libsoup-devel-2.46.0-1.1 [ 37s] [143/147] installing gobject-introspection-devel-1.36.0-1.1 [ 37s] [144/147] installing gssdp-0.14.4-1.1 [ 37s] [145/147] installing gssdp-devel-0.14.4-1.1 [ 37s] [146/147] installing gupnp-0.20.5-1.1 [ 37s] [147/147] installing gupnp-devel-0.20.5-1.1 [ 37s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 37s] now finalizing build dir... [ 37s] /etc/profile.d/dbus.sh: line 6: pgrep: command not found [ 38s] build target is armv7l-tizen-linux [ 38s] ----------------------------------------------------------------- [ 38s] I have the following modifications for GUPnP-AV.spec: [ 38s] 5c5 [ 38s] < Release: 0 [ 38s] --- [ 38s] > Release: 2.1 [ 38s] 69a70 [ 38s] > %changelog [ 38s] ----------------------------------------------------------------- [ 38s] ----- building GUPnP-AV.spec (user abuild) [ 38s] ----------------------------------------------------------------- [ 38s] ----------------------------------------------------------------- [ 38s] /etc/profile.d/dbus.sh: line 6: pgrep: command not found [ 38s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0:IVI/arm/b54251e6bd58b6c8cd7a78eebe51f78d-GUPnP-AV' -ba /home/abuild/rpmbuild/SOURCES/GUPnP-AV.spec [ 38s] Building target platforms: armv7l-tizen-linux [ 38s] Building for target armv7l-tizen-linux [ 38s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.d5CQim [ 38s] + umask 022 [ 38s] + cd /home/abuild/rpmbuild/BUILD [ 38s] + cd /home/abuild/rpmbuild/BUILD [ 38s] + rm -rf gupnp-av-0.12.4 [ 38s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/gupnp-av-0.12.4.tar.gz [ 38s] + /bin/tar -xf - [ 38s] + STATUS=0 [ 38s] + '[' 0 -ne 0 ']' [ 38s] + cd gupnp-av-0.12.4 [ 38s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 38s] + exit 0 [ 38s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.ApMzv1 [ 38s] + umask 022 [ 38s] + cd /home/abuild/rpmbuild/BUILD [ 38s] + cd gupnp-av-0.12.4 [ 38s] ++ uname -m [ 38s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 38s] + LANG=C [ 38s] + export LANG [ 38s] + unset DISPLAY [ 38s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 38s] + export CFLAGS [ 38s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 38s] + export CXXFLAGS [ 38s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 38s] + export FFLAGS [ 38s] + LDFLAGS= [ 38s] + export LDFLAGS [ 38s] + LD_AS_NEEDED=1 [ 38s] + export LD_AS_NEEDED [ 38s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 38s] + export CFLAGS [ 38s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 38s] + export CXXFLAGS [ 38s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 38s] + export FFLAGS [ 38s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --disable-static [ 38s] checking for a BSD-compatible install... /usr/bin/install -c [ 38s] checking whether build environment is sane... yes [ 38s] /home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/build-aux/missing: Unknown `--is-lightweight' option [ 38s] Try `/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/build-aux/missing --help' for more information [ 38s] configure: WARNING: 'missing' script is too old or missing [ 38s] checking for a thread-safe mkdir -p... /usr/bin/mkdir -p [ 38s] checking for gawk... gawk [ 38s] checking whether make sets $(MAKE)... yes [ 38s] checking whether make supports nested variables... yes [ 38s] checking whether UID '399' is supported by ustar format... yes [ 38s] checking whether GID '399' is supported by ustar format... yes [ 38s] checking how to create a ustar tar archive... gnutar [ 38s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 38s] checking whether make supports nested variables... (cached) yes [ 38s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 39s] checking whether the C compiler works... yes [ 39s] checking for C compiler default output file name... a.out [ 39s] checking for suffix of executables... [ 39s] checking whether we are cross compiling... no [ 39s] checking for suffix of object files... o [ 39s] checking whether we are using the GNU C compiler... yes [ 39s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 39s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 39s] checking for style of include used by make... GNU [ 39s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 39s] checking whether armv7l-tizen-linux-gnueabi-gcc and cc understand -c and -o together... yes [ 39s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 39s] checking for grep that handles long lines and -e... /usr/bin/grep [ 39s] checking for egrep... /usr/bin/grep -E [ 39s] checking for ANSI C header files... yes [ 39s] checking for sys/types.h... yes [ 39s] checking for sys/stat.h... yes [ 39s] checking for stdlib.h... yes [ 39s] checking for string.h... yes [ 39s] checking for memory.h... yes [ 39s] checking for strings.h... yes [ 39s] checking for inttypes.h... yes [ 39s] checking for stdint.h... yes [ 39s] checking for unistd.h... yes [ 39s] checking for stdlib.h... (cached) yes [ 39s] checking for unistd.h... (cached) yes [ 39s] checking for sys/param.h... yes [ 39s] checking for getpagesize... yes [ 39s] checking for working mmap... yes [ 40s] checking build system type... armv7l-tizen-linux-gnueabi [ 40s] checking host system type... armv7l-tizen-linux-gnueabi [ 40s] checking how to print strings... printf [ 40s] checking for a sed that does not truncate output... /usr/bin/sed [ 40s] checking for fgrep... /usr/bin/grep -F [ 40s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 40s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 40s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 40s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 40s] checking whether ln -s works... yes [ 40s] checking the maximum length of command line arguments... 1572864 [ 40s] checking whether the shell understands some XSI constructs... yes [ 40s] checking whether the shell understands "+="... yes [ 40s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 40s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 40s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 40s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 40s] checking for objdump... objdump [ 40s] checking how to recognize dependent libraries... pass_all [ 40s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 40s] checking for dlltool... no [ 40s] checking how to associate runtime and link libraries... printf %s\n [ 40s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 40s] checking for ar... ar [ 40s] checking for archiver @FILE support... @ [ 40s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 40s] checking for strip... strip [ 40s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 40s] checking for ranlib... ranlib [ 40s] checking command to parse /usr/bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 40s] checking for sysroot... no [ 40s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 40s] checking for mt... no [ 40s] checking if : is a manifest tool... no [ 40s] checking for dlfcn.h... yes [ 40s] checking for objdir... .libs [ 40s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 40s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 40s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 40s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 40s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 40s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 40s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 40s] checking whether -lc should be explicitly linked in... no [ 40s] checking dynamic linker characteristics... GNU/Linux ld.so [ 40s] checking how to hardcode library paths into programs... immediate [ 40s] checking whether stripping libraries is possible... yes [ 40s] checking if libtool supports shared libraries... yes [ 40s] checking whether to build shared libraries... yes [ 40s] checking whether to build static libraries... no [ 40s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /usr/bin/armv7l-tizen-linux-gnueabi-pkg-config [ 40s] checking pkg-config is at least version 0.9.0... yes [ 40s] checking for LIBGUPNP... yes [ 40s] checking for gobject-introspection... yes [ 41s] checking whether G-I is 1.36 or newer... yes [ 41s] checking for vapigen... /usr/bin/vapigen [ 41s] checking /usr/bin/vapigen is at least version 0.20... yes [ 41s] checking for gtkdoc-check... no [ 41s] checking for gtkdoc-rebase... no [ 41s] checking for gtkdoc-mkpdf... no [ 41s] checking whether to build gtk-doc documentation... no [ 41s] checking that generated files are newer than configure... done [ 41s] configure: creating ./config.status [ 41s] config.status: creating Makefile [ 41s] config.status: creating libgupnp-av/Makefile [ 41s] config.status: creating tests/Makefile [ 41s] config.status: creating tests/gtest/Makefile [ 41s] config.status: creating doc/Makefile [ 41s] config.status: creating doc/version.xml [ 41s] config.status: creating data/Makefile [ 41s] config.status: creating vala/Makefile [ 41s] config.status: creating gupnp-av-1.0.pc [ 41s] config.status: creating gupnp-av-1.0-uninstalled.pc [ 41s] config.status: creating config.h [ 41s] config.status: executing depfiles commands [ 42s] config.status: executing libtool commands [ 42s] [ 42s] gupnp-av 0.12.4 [ 42s] --------------------- [ 42s] [ 42s] Prefix: /usr [ 42s] GObject-Introspection: yes [ 42s] VALA bindings: yes [ 42s] [ 42s] + make -j8 [ 42s] make all-recursive [ 42s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4' [ 42s] Making all in libgupnp-av [ 42s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/libgupnp-av' [ 42s] make all-am [ 42s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/libgupnp-av' [ 42s] CC gupnp-didl-lite-object.lo [ 42s] CC gupnp-didl-lite-item.lo [ 42s] CC gupnp-didl-lite-container.lo [ 42s] CC gupnp-didl-lite-createclass.lo [ 42s] CC gupnp-didl-lite-resource.lo [ 42s] CC gupnp-didl-lite-descriptor.lo [ 42s] CC gupnp-didl-lite-parser.lo [ 42s] CC gupnp-didl-lite-contributor.lo [ 43s] gupnp-didl-lite-resource.c: In function 'gupnp_didl_lite_resource_set_subtitle_file_uri': [ 43s] gupnp-didl-lite-resource.c:1916:31: warning: pointer targets in passing argument 4 of 'xmlSetNsProp' differ in signedness [-Wpointer-sign] [ 43s] uri); [ 43s] ^ [ 43s] In file included from gupnp-didl-lite-resource.h:33:0, [ 43s] from gupnp-didl-lite-resource.c:36: [ 43s] /usr/include/libxml2/libxml/tree.h:1019:3: note: expected 'const xmlChar *' but argument is of type 'const char *' [ 43s] xmlSetNsProp (xmlNodePtr node, [ 43s] ^ [ 43s] gupnp-didl-lite-resource.c: In function 'gupnp_didl_lite_resource_set_subtitle_file_type': [ 43s] gupnp-didl-lite-resource.c:1948:31: warning: pointer targets in passing argument 4 of 'xmlSetNsProp' differ in signedness [-Wpointer-sign] [ 43s] type); [ 43s] ^ [ 43s] In file included from gupnp-didl-lite-resource.h:33:0, [ 43s] from gupnp-didl-lite-resource.c:36: [ 43s] /usr/include/libxml2/libxml/tree.h:1019:3: note: expected 'const xmlChar *' but argument is of type 'const char *' [ 43s] xmlSetNsProp (xmlNodePtr node, [ 43s] ^ [ 43s] CC gupnp-didl-lite-writer.lo [ 43s] CC gupnp-protocol-info.lo [ 43s] CC gupnp-search-criteria-parser.lo [ 43s] CC gupnp-last-change-parser.lo [ 43s] CC gupnp-cds-last-change-parser.lo [ 43s] gupnp-didl-lite-writer.c: In function 'check_dlna_attr': [ 43s] gupnp-didl-lite-writer.c:219:44: warning: pointer targets in passing argument 1 of 'g_strcmp0' differ in signedness [-Wpointer-sign] [ 43s] if (attr->ns && g_strcmp0 (attr->ns->prefix, "dlna") == 0) [ 43s] ^ [ 43s] In file included from /usr/include/glib-2.0/glib.h:82:0, [ 43s] from /usr/include/glib-2.0/gobject/gbinding.h:28, [ 43s] from /usr/include/glib-2.0/glib-object.h:23, [ 43s] from gupnp-didl-lite-writer.h:27, [ 43s] from gupnp-didl-lite-writer.c:33: [ 43s] /usr/include/glib-2.0/glib/gtestutils.h:115:9: note: expected 'const char *' but argument is of type 'const xmlChar *' [ 43s] int g_strcmp0 (const char *str1, [ 43s] ^ [ 43s] CC gupnp-media-collection.lo [ 43s] CC gupnp-feature.lo [ 43s] CC gupnp-feature-list-parser.lo [ 43s] CC gupnp-dlna.lo [ 43s] CC gupnp-av-error.lo [ 43s] CC xml-util.lo [ 43s] CC gvalue-util.lo [ 43s] CC fragment-util.lo [ 43s] CC time-utils.lo [ 43s] CC xsd-data.lo [ 43s] CC gupnp-av-marshal.lo [ 43s] CCLD libgupnp-av-1.0.la [ 43s] GISCAN GUPnPAV-1.0.gir [ 63s] GICOMP GUPnPAV-1.0.gir [ 67s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/libgupnp-av' [ 67s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/libgupnp-av' [ 67s] Making all in tests [ 67s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/tests' [ 67s] Making all in gtest [ 67s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/tests/gtest' [ 67s] make[3]: Nothing to be done for 'all'. [ 67s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/tests/gtest' [ 67s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/tests' [ 67s] CC test_search_criteria_parser-test-search-criteria-parser.o [ 67s] CCLD test-search-criteria-parser [ 67s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/tests' [ 67s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/tests' [ 67s] Making all in doc [ 67s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/doc' [ 67s] make[2]: Nothing to be done for 'all'. [ 67s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/doc' [ 67s] Making all in vala [ 67s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/vala' [ 67s] GEN gupnp-av-1.0.stamp [ 71s] Generation succeeded - 0 warning(s) [ 71s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/vala' [ 71s] Making all in data [ 71s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/data' [ 71s] make[2]: Nothing to be done for 'all'. [ 71s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/data' [ 71s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4' [ 71s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4' [ 71s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4' [ 71s] + exit 0 [ 71s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.s1lPzn [ 71s] + umask 022 [ 71s] + cd /home/abuild/rpmbuild/BUILD [ 71s] + cd gupnp-av-0.12.4 [ 71s] + LANG=C [ 71s] + export LANG [ 71s] + unset DISPLAY [ 71s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gupnp-av-0.12.4-2.1.arm [ 71s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/gupnp-av-0.12.4-2.1.arm [ 71s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gupnp-av-0.12.4-2.1.arm [ 71s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/gupnp-av-0.12.4-2.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/gupnp-av-0.12.4-2.1.arm install [ 71s] Making install in libgupnp-av [ 71s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/libgupnp-av' [ 71s] /bin/make install-am [ 71s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/libgupnp-av' [ 71s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/libgupnp-av' [ 71s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gupnp-av-0.12.4-2.1.arm/usr/lib' [ 71s] /bin/sh ../libtool --mode=install /usr/bin/install -c libgupnp-av-1.0.la '/home/abuild/rpmbuild/BUILDROOT/gupnp-av-0.12.4-2.1.arm/usr/lib' [ 71s] libtool: install: /usr/bin/install -c .libs/libgupnp-av-1.0.so.2.0.0 /home/abuild/rpmbuild/BUILDROOT/gupnp-av-0.12.4-2.1.arm/usr/lib/libgupnp-av-1.0.so.2.0.0 [ 71s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/gupnp-av-0.12.4-2.1.arm/usr/lib && { ln -s -f libgupnp-av-1.0.so.2.0.0 libgupnp-av-1.0.so.2 || { rm -f libgupnp-av-1.0.so.2 && ln -s libgupnp-av-1.0.so.2.0.0 libgupnp-av-1.0.so.2; }; }) [ 71s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/gupnp-av-0.12.4-2.1.arm/usr/lib && { ln -s -f libgupnp-av-1.0.so.2.0.0 libgupnp-av-1.0.so || { rm -f libgupnp-av-1.0.so && ln -s libgupnp-av-1.0.so.2.0.0 libgupnp-av-1.0.so; }; }) [ 71s] libtool: install: /usr/bin/install -c .libs/libgupnp-av-1.0.lai /home/abuild/rpmbuild/BUILDROOT/gupnp-av-0.12.4-2.1.arm/usr/lib/libgupnp-av-1.0.la [ 71s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 71s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gupnp-av-0.12.4-2.1.arm/usr/share/gir-1.0' [ 71s] /usr/bin/install -c -m 644 GUPnPAV-1.0.gir '/home/abuild/rpmbuild/BUILDROOT/gupnp-av-0.12.4-2.1.arm/usr/share/gir-1.0' [ 71s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gupnp-av-0.12.4-2.1.arm/usr/include/gupnp-av-1.0/libgupnp-av' [ 71s] /usr/bin/install -c -m 644 gupnp-didl-lite-object.h gupnp-didl-lite-item.h gupnp-didl-lite-container.h gupnp-didl-lite-createclass.h gupnp-didl-lite-parser.h gupnp-didl-lite-resource.h gupnp-didl-lite-descriptor.h gupnp-didl-lite-contributor.h gupnp-didl-lite-writer.h gupnp-protocol-info.h gupnp-search-criteria-parser.h gupnp-last-change-parser.h gupnp-cds-last-change-parser.h gupnp-media-collection.h gupnp-feature.h gupnp-feature-list-parser.h gupnp-dlna.h gupnp-av-error.h gupnp-av.h gupnp-av-enums.h '/home/abuild/rpmbuild/BUILDROOT/gupnp-av-0.12.4-2.1.arm/usr/include/gupnp-av-1.0/libgupnp-av' [ 71s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gupnp-av-0.12.4-2.1.arm/usr/lib/girepository-1.0' [ 71s] /usr/bin/install -c -m 644 GUPnPAV-1.0.typelib '/home/abuild/rpmbuild/BUILDROOT/gupnp-av-0.12.4-2.1.arm/usr/lib/girepository-1.0' [ 71s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/libgupnp-av' [ 71s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/libgupnp-av' [ 71s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/libgupnp-av' [ 71s] Making install in tests [ 71s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/tests' [ 72s] Making install in gtest [ 72s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/tests/gtest' [ 72s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/tests/gtest' [ 72s] make[3]: Nothing to be done for 'install-exec-am'. [ 72s] make[3]: Nothing to be done for 'install-data-am'. [ 72s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/tests/gtest' [ 72s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/tests/gtest' [ 72s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/tests' [ 72s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/tests' [ 72s] make[3]: Nothing to be done for 'install-exec-am'. [ 72s] make[3]: Nothing to be done for 'install-data-am'. [ 72s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/tests' [ 72s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/tests' [ 72s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/tests' [ 72s] Making install in doc [ 72s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/doc' [ 72s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/doc' [ 72s] make[2]: Nothing to be done for 'install-exec-am'. [ 72s] /usr/bin/install -c -m 644 ./html/GUPnPCDSLastChangeParser.html [ 72s] /usr/bin/install -c -m 644 ./html/GUPnPDIDLLiteContainer.html [ 72s] /usr/bin/install -c -m 644 ./html/GUPnPDIDLLiteContributor.html [ 72s] /usr/bin/install -c -m 644 ./html/GUPnPDIDLLiteDescriptor.html [ 72s] /usr/bin/install -c -m 644 ./html/GUPnPDIDLLiteItem.html [ 72s] /usr/bin/install -c -m 644 ./html/GUPnPDIDLLiteObject.html [ 72s] /usr/bin/install -c -m 644 ./html/GUPnPDIDLLiteParser.html [ 72s] /usr/bin/install -c -m 644 ./html/GUPnPDIDLLiteResource.html [ 72s] /usr/bin/install -c -m 644 ./html/GUPnPDIDLLiteWriter.html [ 72s] /usr/bin/install -c -m 644 ./html/GUPnPFeature.html [ 72s] /usr/bin/install -c -m 644 ./html/GUPnPFeatureListParser.html [ 72s] /usr/bin/install -c -m 644 ./html/GUPnPLastChangeParser.html [ 72s] /usr/bin/install -c -m 644 ./html/GUPnPMediaCollection.html [ 72s] /usr/bin/install -c -m 644 ./html/GUPnPProtocolInfo.html [ 72s] /usr/bin/install -c -m 644 ./html/GUPnPSearchCriteriaParser.html [ 72s] /usr/bin/install -c -m 644 ./html/annotation-glossary.html [ 72s] /usr/bin/install -c -m 644 ./html/ch01.html [ 72s] /usr/bin/install -c -m 644 ./html/ch02.html [ 72s] /usr/bin/install -c -m 644 ./html/gupnp-av-Error-codes.html [ 72s] /usr/bin/install -c -m 644 ./html/gupnp-av-GUPnPDIDLLiteCreateClass.html [ 72s] /usr/bin/install -c -m 644 ./html/gupnp-av.devhelp2 [ 72s] /usr/bin/install -c -m 644 ./html/home.png [ 72s] /usr/bin/install -c -m 644 ./html/index.html [ 72s] /usr/bin/install -c -m 644 ./html/index.sgml [ 72s] /usr/bin/install -c -m 644 ./html/left.png [ 72s] /usr/bin/install -c -m 644 ./html/right.png [ 72s] /usr/bin/install -c -m 644 ./html/style.css [ 72s] /usr/bin/install -c -m 644 ./html/up.png [ 72s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/doc' [ 72s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/doc' [ 72s] Making install in vala [ 72s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/vala' [ 72s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/vala' [ 72s] make[2]: Nothing to be done for 'install-exec-am'. [ 72s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gupnp-av-0.12.4-2.1.arm/usr/share/vala/vapi' [ 72s] /usr/bin/install -c -m 644 gupnp-av-1.0.vapi ./gupnp-av-1.0.deps '/home/abuild/rpmbuild/BUILDROOT/gupnp-av-0.12.4-2.1.arm/usr/share/vala/vapi' [ 72s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/vala' [ 72s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/vala' [ 72s] Making install in data [ 72s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/data' [ 72s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/data' [ 72s] make[2]: Nothing to be done for 'install-exec-am'. [ 72s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gupnp-av-0.12.4-2.1.arm/usr/share/gupnp-av' [ 72s] /usr/bin/install -c -m 644 didl-lite-v2.xsd upnp.xsd av.xsd xml.xsd simpledc20021212.xsd '/home/abuild/rpmbuild/BUILDROOT/gupnp-av-0.12.4-2.1.arm/usr/share/gupnp-av' [ 72s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/data' [ 72s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4/data' [ 72s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4' [ 72s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4' [ 72s] make[2]: Nothing to be done for 'install-exec-am'. [ 72s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gupnp-av-0.12.4-2.1.arm/usr/lib/pkgconfig' [ 72s] /usr/bin/install -c -m 644 gupnp-av-1.0.pc '/home/abuild/rpmbuild/BUILDROOT/gupnp-av-0.12.4-2.1.arm/usr/lib/pkgconfig' [ 72s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4' [ 72s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4' [ 72s] + rm -f /home/abuild/rpmbuild/BUILDROOT/gupnp-av-0.12.4-2.1.arm/usr/share/info/dir [ 72s] + find /home/abuild/rpmbuild/BUILDROOT/gupnp-av-0.12.4-2.1.arm -regex '.*\.la$' [ 72s] + xargs rm -f -- [ 72s] + find /home/abuild/rpmbuild/BUILDROOT/gupnp-av-0.12.4-2.1.arm -regex '.*\.a$' [ 72s] + xargs rm -f -- [ 72s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gupnp-av-0.12.4-2.1.arm/usr/share/gtk-doc [ 72s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/gupnp-av-0.12.4 [ 72s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/gupnp-av-0.12.4-2.1.arm/usr/lib/libgupnp-av-1.0.so.2.0.0 [ 72s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 72s] cpio: glibc-2.20/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 72s] cpio: glibc-2.20/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 72s] 1096 blocks [ 73s] + /usr/lib/rpm/check-buildroot [ 73s] + /usr/lib/rpm//brp-compress [ 73s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 73s] + /usr/lib/rpm/brp-python-hardlink [ 73s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/gupnp-av-0.12.4-2.1.arm [ 73s] Processing files: gupnp-av-0.12.4-2.1.armv7l [ 73s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.OtilHO [ 73s] + umask 022 [ 73s] + cd /home/abuild/rpmbuild/BUILD [ 73s] + cd gupnp-av-0.12.4 [ 73s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/gupnp-av-0.12.4-2.1.arm/usr/share/doc/packages/gupnp-av [ 73s] + export DOCDIR [ 73s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/gupnp-av-0.12.4-2.1.arm/usr/share/doc/packages/gupnp-av [ 73s] + cp -pr AUTHORS /home/abuild/rpmbuild/BUILDROOT/gupnp-av-0.12.4-2.1.arm/usr/share/doc/packages/gupnp-av [ 73s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/gupnp-av-0.12.4-2.1.arm/usr/share/doc/packages/gupnp-av [ 73s] + cp -pr README /home/abuild/rpmbuild/BUILDROOT/gupnp-av-0.12.4-2.1.arm/usr/share/doc/packages/gupnp-av [ 73s] + exit 0 [ 73s] Provides: gupnp-av = 0.12.4-2.1 gupnp-av(armv7l-32) = 0.12.4-2.1 libgupnp-av-1.0.so.2 [ 73s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 73s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 73s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 73s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 73s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libglib-2.0.so.0 libgobject-2.0.so.0 libgupnp-1.0.so.4 libpthread.so.0 libxml2.so.2 libxml2.so.2(LIBXML2_2.4.30) libxml2.so.2(LIBXML2_2.5.8) libxml2.so.2(LIBXML2_2.6.0) rtld(GNU_HASH) [ 73s] Processing files: gupnp-av-debugsource-0.12.4-2.1.armv7l [ 73s] Provides: gupnp-av-debugsource = 0.12.4-2.1 gupnp-av-debugsource(armv7l-32) = 0.12.4-2.1 [ 73s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 73s] Processing files: gupnp-av-devel-0.12.4-2.1.armv7l [ 74s] ERROR: Failed to load typelib 'GUPnPAV' [ 74s] Provides: gupnp-av-devel = 0.12.4-2.1 gupnp-av-devel(armv7l-32) = 0.12.4-2.1 pkgconfig(gupnp-av-1.0) = 0.12.4 typelib(GUPnPAV) = 1.0 [ 74s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 74s] Requires: /usr/bin/pkg-config libgupnp-av-1.0.so.2 pkgconfig(gupnp-1.0) [ 74s] Processing files: gupnp-av-debuginfo-0.12.4-2.1.armv7l [ 74s] Provides: gupnp-av-debuginfo = 0.12.4-2.1 gupnp-av-debuginfo(armv7l-32) = 0.12.4-2.1 [ 74s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 74s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/gupnp-av-0.12.4-2.1.arm [ 74s] warning: Could not canonicalize hostname: obspw06 [ 74s] Wrote: /home/abuild/rpmbuild/SRPMS/gupnp-av-0.12.4-2.1.src.rpm [ 74s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/gupnp-av-0.12.4-2.1.armv7l.rpm [ 74s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/gupnp-av-debugsource-0.12.4-2.1.armv7l.rpm [ 74s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/gupnp-av-devel-0.12.4-2.1.armv7l.rpm [ 74s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/gupnp-av-debuginfo-0.12.4-2.1.armv7l.rpm [ 74s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.EoUsrO [ 74s] + umask 022 [ 74s] + cd /home/abuild/rpmbuild/BUILD [ 74s] + cd gupnp-av-0.12.4 [ 74s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/gupnp-av-0.12.4-2.1.arm [ 74s] + exit 0 [ 74s] ... checking for files with abuild user/group [ 74s] ... creating baselibs [ 74s] /etc/profile.d/dbus.sh: line 6: pgrep: command not found [ 75s] [ 75s] obspw06 finished "build GUPnP-AV.spec" at Sat Apr 22 21:48:44 UTC 2017. [ 75s] Retried build at Fri May 26 12:43:38 2017 returned same result, skipped Retried build at Wed May 31 23:45:28 2017 returned same result, skipped Retried build at Fri Jun 2 00:22:40 2017 returned same result, skipped Retried build at Thu Jun 8 07:43:32 2017 returned same result, skipped Retried build at Fri Jun 9 09:40:28 2017 returned same result, skipped Retried build at Wed Jun 14 05:50:53 2017 returned same result, skipped Retried build at Wed Jun 14 23:07:36 2017 returned same result, skipped Retried build at Thu Jun 15 08:45:59 2017 returned same result, skipped Retried build at Mon Jun 19 08:28:37 2017 returned same result, skipped Retried build at Tue Jun 20 10:53:04 2017 returned same result, skipped Retried build at Fri Jun 30 08:42:19 2017 returned same result, skipped Retried build at Mon Jul 3 08:36:05 2017 returned same result, skipped Retried build at Wed Jul 5 23:34:47 2017 returned same result, skipped Retried build at Fri Jul 14 06:29:04 2017 returned same result, skipped Retried build at Thu Aug 3 01:32:45 2017 returned same result, skipped Retried build at Tue Aug 8 07:31:43 2017 returned same result, skipped Retried build at Sat Sep 9 04:52:26 2017 returned same result, skipped