[ 0s] Memory limit set to 82442244KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_4 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 1s] [ 1s] obspw03 started "build _service:gbs:fuse.spec" at Sat Apr 22 21:05:08 UTC 2017. [ 1s] [ 1s] Building fuse for project 'Tizen:3.0:TV' repository 'arm-wayland' arch 'armv7l' srcmd5 'a27f1a0c900cc8f5e6dcfe489af24957' [ 1s] [ 1s] processing recipe /var/cache/build/root_4/.build-srcdir/_service:gbs:fuse.spec ... [ 1s] running changelog2spec --target rpm --file /var/cache/build/root_4/.build-srcdir/_service:gbs:fuse.spec [ 1s] init_buildsystem --configdir /var/run/obs/worker/4/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_4/.build.rpmlist /var/cache/build/root_4/.build-srcdir/_service:gbs:fuse.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] interpreter for 'aarch64' is -1 [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/4/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling setup... [ 1s] [3/40] preinstalling filesystem... [ 1s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling libgcc... [ 1s] [6/40] preinstalling bash... [ 2s] [7/40] preinstalling diffutils... [ 2s] [8/40] preinstalling grep... [ 2s] [9/40] preinstalling libattr... [ 2s] [10/40] preinstalling libbz2... [ 2s] [11/40] preinstalling libcap... [ 2s] [12/40] preinstalling libelf... [ 2s] [13/40] preinstalling libfreebl3... [ 2s] [14/40] preinstalling liblua... [ 2s] [15/40] preinstalling liblzma... [ 2s] [16/40] preinstalling libncurses... [ 2s] [17/40] preinstalling libpopt... [ 2s] [18/40] preinstalling libsmack... [ 2s] [19/40] preinstalling libsqlite... [ 2s] [20/40] preinstalling libuuid... [ 2s] [21/40] preinstalling nspr... [ 2s] [22/40] preinstalling sed... [ 2s] [23/40] preinstalling zlib... [ 2s] [24/40] preinstalling qemu-accel-x86_64-armv7l... [ 5s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 6s] [26/40] preinstalling coreutils... [ 6s] [27/40] preinstalling libacl... [ 6s] [28/40] preinstalling libblkid... [ 6s] [29/40] preinstalling libreadline... [ 6s] [30/40] preinstalling smack... [ 6s] [31/40] preinstalling bzip2... [ 6s] [32/40] preinstalling libmagic... [ 6s] [33/40] preinstalling libxml2... [ 6s] [34/40] preinstalling libmount... [ 6s] [35/40] preinstalling tar... [ 6s] [36/40] preinstalling util-linux... [ 6s] [37/40] preinstalling util-linux-su... [ 6s] [38/40] preinstalling nss... [ 6s] [39/40] preinstalling libsoftokn3... [ 6s] [40/40] preinstalling rpm... [ 6s] [ 6s] running qemu-linux-user-x86_64-cross postinstall script [ 6s] running qemu-accel-x86_64-armv7l postinstall script [ 6s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/liblto_plugin.so': No such file or directory [ 6s] running setup postinstall script [ 6s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 6s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 6s] initializing rpm db... [ 7s] reordering...cycle: libsoftokn3 -> nss [ 7s] breaking dependency nss -> libsoftokn3 [ 7s] done [ 7s] [1/89] installing libmagic-data-5.28-1.19 [ 7s] [2/89] installing setup-0.9-1.8 [ 7s] [3/89] installing terminfo-base-5.9-1.21 [ 7s] [4/89] installing filesystem-3.1-1.2 [ 7s] [5/89] installing glibc-2.20-1.2 [ 7s] [6/89] installing libatomic-4.9.2-1.6 [ 7s] [7/89] installing libgcc-4.9.2-1.6 [ 7s] [8/89] installing libgomp-4.9.2-1.6 [ 7s] [9/89] installing bash-3.2.57-2.1 [ 7s] [10/89] installing cpio-2.11-1.3 [ 7s] [11/89] installing diffutils-3.3-1.3 [ 7s] [12/89] installing findutils-4.3.8-1.22 [ 7s] [13/89] installing hostname-3.12-1.3 [ 7s] [14/89] installing libattr-2.4.47-1.21 [ 7s] [15/89] installing libbz2-1.0.6-1.43 [ 8s] [16/89] installing libcap-2.24-1.21 [ 8s] [17/89] installing libelf-0.153-1.25 [ 8s] [18/89] installing libext2fs-1.42.13-1.2 [ 8s] [19/89] installing libfreebl3-3.23-1.37 [ 8s] [20/89] installing libitm-4.9.2-1.6 [ 8s] [21/89] installing libltdl-2.4.2-1.25 [ 8s] [22/89] installing liblua-5.1.4-1.5 [ 8s] [23/89] installing liblzma-5.2.2-1.19 [ 8s] [24/89] installing libpcre-8.39-1.3 [ 8s] [25/89] installing libpopt-1.16-1.5 [ 8s] [26/89] installing libsmack-1.3.0-1.20 [ 8s] [27/89] installing libsmartcols-2.28-1.3 [ 8s] [28/89] installing libsqlite-3.8.10.2-1.5 [ 8s] [29/89] installing libstdc++-4.9.2-1.6 [ 8s] [30/89] installing libuuid-2.28-1.3 [ 8s] [31/89] installing m4-1.4.17-1.3 [ 8s] [32/89] installing net-tools-2.0_20121208git-1.3 [ 8s] [33/89] installing nspr-4.12-1.10 [ 8s] [34/89] installing patch-2.7-1.5 [ 8s] [35/89] installing pkg-config-0.28-1.24 [ 9s] [36/89] installing sed-4.1c-1.3 [ 9s] [37/89] installing update-alternatives-1.16.3-1.3 [ 9s] [38/89] installing which-2.20-1.3 [ 9s] [39/89] installing zlib-1.2.8-1.25 [ 9s] [40/89] installing libncurses-5.9-1.21 [ 9s] [41/89] installing build-compare-2015.04.28-1.16 [ 9s] [42/89] installing libstdc++-devel-4.9.2-1.6 [ 9s] [43/89] installing qemu-linux-user-x86_64-cross-2.7.0-1.4.1 [ 10s] [44/89] installing cpp-4.9.2-1.6 [ 10s] [45/89] installing gcc-c++-4.9.2-1.6 [ 11s] [46/89] installing binutils-2.25-1.11 [ 11s] [47/89] installing coreutils-6.9-1.3 [ 11s] [48/89] installing db4-4.8.30.NC-1.28 [ 11s] [49/89] installing gawk-3.1.5-1.3 [ 11s] [50/89] installing grep-2.5.2-1.3 [ 12s] [51/89] installing less-466-1.3 [ 12s] [52/89] installing libacl-2.2.52-1.22 [ 12s] [53/89] installing libasm-0.153-1.25 [ 12s] [54/89] installing libblkid-2.28-1.3 [ 12s] [55/89] installing libreadline-5.2-1.20 [ 12s] [56/89] installing libubsan-4.9.2-1.6 [ 12s] [57/89] installing make-4.0-1.5 [ 12s] [58/89] installing nss-certs-3.23-1.37 [ 12s] [59/89] installing smack-1.3.0-1.20 [ 12s] [60/89] installing bzip2-1.0.6-1.43 [ 12s] [61/89] installing libmagic-5.28-1.19 [ 12s] [62/89] installing libxml2-2.9.4-2.17 [ 12s] [63/89] installing xz-5.2.2-1.19 [ 12s] [64/89] installing libdw-0.153-1.25 [ 12s] [65/89] installing linux-glibc-devel-3.10-1.26 [ 12s] [66/89] installing file-5.28-1.19 [ 12s] [67/89] installing glibc-locale-2.20-1.2 [ 13s] [68/89] installing libmount-2.28-1.3 [ 13s] [69/89] installing tar-1.17-1.3 [ 13s] [70/89] installing gzip-1.3.12-1.21 [ 13s] [71/89] installing libfdisk1-2.28-1.3 [ 13s] [72/89] installing pam-1.1.6-1.2 [ 13s] [73/89] installing perl-5.20.0-1.27 [ 14s] [74/89] installing tzdata-2016i-1.1 [ 14s] [75/89] installing elfutils-0.153-1.25 [ 14s] [76/89] installing gcc-4.9.2-1.6 [ 15s] [77/89] installing build-mkbaselibs-20120927-1.3 [ 15s] [78/89] installing glibc-devel-2.20-1.2 [ 15s] [79/89] installing qemu-accel-x86_64-armv7l-0.4-1.2 [ 19s] [80/89] installing autoconf-2.69-1.28 [ 19s] [81/89] installing util-linux-2.28-1.3 [ 19s] [82/89] installing automake-1.14.1-1.23 [ 19s] [83/89] installing util-linux-su-2.28-1.3 [ 19s] [84/89] installing build-20120927-1.3 [ 19s] [85/89] installing libtool-2.4.2-1.25 [ 19s] [86/89] installing nss-3.23-1.37 [ 19s] [87/89] installing libsoftokn3-3.23-1.37 [ 19s] [88/89] installing rpm-4.11.0.1-1.14 [ 20s] [89/89] installing rpm-build-4.11.0.1-1.14 [ 20s] removing nis flags from /var/cache/build/root_4/etc/nsswitch.conf... [ 20s] now finalizing build dir... [ 20s] build target is armv7l-tizen-linux [ 20s] ----------------------------------------------------------------- [ 20s] I have the following modifications for fuse.spec: [ 20s] 7c7 [ 20s] < Release: 0 [ 20s] --- [ 20s] > Release: 1.1 [ 20s] 163a164 [ 20s] > %changelog [ 20s] ----------------------------------------------------------------- [ 20s] ----- building fuse.spec (user abuild) [ 20s] ----------------------------------------------------------------- [ 20s] ----------------------------------------------------------------- [ 20s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0:TV/arm-wayland/a27f1a0c900cc8f5e6dcfe489af24957-fuse' -ba /home/abuild/rpmbuild/SOURCES/fuse.spec [ 20s] Building target platforms: armv7l-tizen-linux [ 20s] Building for target armv7l-tizen-linux [ 20s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.TRZyua [ 20s] + umask 022 [ 20s] + cd /home/abuild/rpmbuild/BUILD [ 20s] + cd /home/abuild/rpmbuild/BUILD [ 20s] + rm -rf fuse-2.9.6 [ 20s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/fuse-2.9.6.tar.gz [ 20s] + /bin/tar -xf - [ 20s] + STATUS=0 [ 20s] + '[' 0 -ne 0 ']' [ 20s] + cd fuse-2.9.6 [ 20s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 20s] + echo 'Patch #0 (0001-fix-pthread-in-fuse-pc.patch):' [ 20s] Patch #0 (0001-fix-pthread-in-fuse-pc.patch): [ 20s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0001-fix-pthread-in-fuse-pc.patch [ 20s] + /bin/patch -p1 --fuzz=2 [ 20s] patching file configure [ 20s] patching file configure.ac [ 20s] + echo 'Patch #1 (0002-fusermount-compile-as-pie.patch):' [ 20s] Patch #1 (0002-fusermount-compile-as-pie.patch): [ 20s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0002-fusermount-compile-as-pie.patch [ 20s] + /bin/patch -p1 --fuzz=2 [ 20s] patching file util/Makefile.am [ 20s] patching file util/Makefile.in [ 20s] + echo 'Patch #2 (0003-fuse-gnu-source-fixes.patch):' [ 20s] Patch #2 (0003-fuse-gnu-source-fixes.patch): [ 20s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0003-fuse-gnu-source-fixes.patch [ 20s] + /bin/patch -p1 --fuzz=2 [ 20s] patching file aclocal.m4 [ 20s] patching file configure [ 20s] + echo 'Patch #3 (0004-fuse-install-fixes.patch):' [ 20s] Patch #3 (0004-fuse-install-fixes.patch): [ 20s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0004-fuse-install-fixes.patch [ 20s] + /bin/patch -p1 --fuzz=2 [ 20s] patching file util/Makefile.am [ 20s] + echo 'Patch #4 (0005-Fix-Launchpad-bug-1087757-fuse-not-building-for-aarc.patch):' [ 20s] Patch #4 (0005-Fix-Launchpad-bug-1087757-fuse-not-building-for-aarc.patch): [ 20s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0005-Fix-Launchpad-bug-1087757-fuse-not-building-for-aarc.patch [ 20s] + /bin/patch -p1 --fuzz=2 [ 20s] patching file include/fuse_kernel.h [ 20s] + cp /home/abuild/rpmbuild/SOURCES/fuse.manifest . [ 20s] + exit 0 [ 20s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.TMW3Xa [ 20s] + umask 022 [ 20s] + cd /home/abuild/rpmbuild/BUILD [ 20s] + cd fuse-2.9.6 [ 20s] ++ uname -m [ 20s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 20s] + LANG=C [ 20s] + export LANG [ 20s] + unset DISPLAY [ 20s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 20s] + export CFLAGS [ 20s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 20s] + export CXXFLAGS [ 20s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 20s] + export FFLAGS [ 20s] + LDFLAGS= [ 20s] + export LDFLAGS [ 20s] + LD_AS_NEEDED=1 [ 20s] + export LD_AS_NEEDED [ 20s] + export 'CFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -g -fno-strict-aliasing' [ 20s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -g -fno-strict-aliasing' [ 20s] + export MOUNT_FUSE_PATH=/usr/sbin [ 20s] + MOUNT_FUSE_PATH=/usr/sbin [ 20s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -g -fno-strict-aliasing' [ 20s] + export CFLAGS [ 20s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 20s] + export CXXFLAGS [ 20s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 20s] + export FFLAGS [ 20s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --with-pic --with-pkgconfigdir=/usr/lib/pkgconfig --enable-lib --disable-example --enable-static [ 21s] checking build system type... armv7l-tizen-linux-gnueabi [ 21s] checking host system type... armv7l-tizen-linux-gnueabi [ 21s] checking target system type... armv7l-tizen-linux-gnueabi [ 21s] checking for a BSD-compatible install... /bin/install -c [ 21s] checking whether build environment is sane... yes [ 21s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 21s] checking for gawk... gawk [ 21s] checking whether make sets $(MAKE)... yes [ 21s] checking whether make supports nested variables... yes [ 21s] checking whether make supports nested variables... (cached) yes [ 21s] checking how to print strings... printf [ 21s] checking for style of include used by make... GNU [ 21s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 21s] checking whether the C compiler works... yes [ 21s] checking for C compiler default output file name... a.out [ 21s] checking for suffix of executables... [ 21s] checking whether we are cross compiling... no [ 21s] checking for suffix of object files... o [ 21s] checking whether we are using the GNU C compiler... yes [ 21s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 21s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 21s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 21s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 21s] checking for a sed that does not truncate output... /bin/sed [ 21s] checking for grep that handles long lines and -e... /bin/grep [ 21s] checking for egrep... /bin/grep -E [ 21s] checking for fgrep... /bin/grep -F [ 21s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 21s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 21s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 21s] checking the name lister (/bin/nm -B) interface... BSD nm [ 21s] checking whether ln -s works... yes [ 21s] checking the maximum length of command line arguments... 1572864 [ 21s] checking whether the shell understands some XSI constructs... yes [ 21s] checking whether the shell understands "+="... yes [ 21s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 21s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 21s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 21s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 21s] checking for objdump... objdump [ 21s] checking how to recognize dependent libraries... pass_all [ 21s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 21s] checking for dlltool... no [ 21s] checking how to associate runtime and link libraries... printf %s\n [ 21s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 21s] checking for ar... ar [ 21s] checking for archiver @FILE support... @ [ 21s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 21s] checking for strip... strip [ 21s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 21s] checking for ranlib... ranlib [ 21s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 21s] checking for sysroot... no [ 21s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 21s] checking for mt... no [ 21s] checking if : is a manifest tool... no [ 21s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 21s] checking for ANSI C header files... yes [ 22s] checking for sys/types.h... yes [ 22s] checking for sys/stat.h... yes [ 22s] checking for stdlib.h... yes [ 22s] checking for string.h... yes [ 22s] checking for memory.h... yes [ 22s] checking for strings.h... yes [ 22s] checking for inttypes.h... yes [ 22s] checking for stdint.h... yes [ 22s] checking for unistd.h... yes [ 22s] checking for dlfcn.h... yes [ 22s] checking for objdir... .libs [ 22s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 22s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 22s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 22s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 22s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 22s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 22s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 22s] checking whether -lc should be explicitly linked in... no [ 22s] checking dynamic linker characteristics... GNU/Linux ld.so [ 22s] checking how to hardcode library paths into programs... immediate [ 22s] checking whether stripping libraries is possible... yes [ 22s] checking if libtool supports shared libraries... yes [ 22s] checking whether to build shared libraries... yes [ 22s] checking whether to build static libraries... yes [ 22s] checking for armv7l-tizen-linux-gnueabi-gcc... (cached) armv7l-tizen-linux-gnueabi-gcc [ 22s] checking whether we are using the GNU C compiler... (cached) yes [ 22s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... (cached) yes [ 22s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... (cached) none needed [ 22s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... (cached) yes [ 22s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... (cached) gcc3 [ 22s] checking for fork... yes [ 22s] checking for setxattr... yes [ 22s] checking for fdatasync... yes [ 22s] checking for splice... yes [ 22s] checking for vmsplice... yes [ 22s] checking for utimensat... yes [ 22s] checking for posix_fallocate... yes [ 23s] checking for struct stat.st_atim... yes [ 23s] checking for struct stat.st_atimespec... no [ 23s] checking for library containing dlopen... -ldl [ 23s] checking for library containing clock_gettime... none required [ 23s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 23s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 23s] checking for shared library run path origin... done [ 23s] checking for iconv... yes [ 23s] checking for working iconv... yes [ 23s] checking for iconv declaration... [ 23s] extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); [ 23s] configure: UDEV_RULES_PATH env var not set, using default /etc/udev/rules.d [ 23s] configure: INIT_D_PATH env var not set, using default /etc/init.d [ 23s] checking if umount supports --fake --no-canonicalize... yes [ 23s] checking that generated files are newer than configure... done [ 23s] configure: creating ./config.status [ 23s] config.status: creating fuse.pc [ 23s] config.status: creating Makefile [ 23s] config.status: creating lib/Makefile [ 23s] config.status: creating util/Makefile [ 23s] config.status: creating example/Makefile [ 24s] config.status: creating include/Makefile [ 24s] config.status: creating doc/Makefile [ 24s] config.status: creating include/config.h [ 24s] config.status: executing depfiles commands [ 24s] config.status: executing libtool commands [ 24s] + make -j8 [ 24s] cd . && /bin/sh /home/abuild/rpmbuild/BUILD/fuse-2.9.6/missing automake-1.14 --foreign [ 29s] cd . && /bin/sh ./config.status Makefile [ 29s] config.status: creating Makefile [ 29s] Making all in include [ 29s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6/include' [ 29s] cd .. && /bin/sh ./config.status include/Makefile [ 29s] config.status: creating include/Makefile [ 30s] (CDPATH="${ZSH_VERSION+.}:" && cd .. && /bin/sh /home/abuild/rpmbuild/BUILD/fuse-2.9.6/missing autoheader) [ 31s] rm -f stamp-h1 [ 31s] touch config.h.in [ 31s] cd .. && /bin/sh ./config.status include/config.h [ 31s] config.status: creating include/config.h [ 31s] config.status: include/config.h is unchanged [ 31s] make all-am [ 31s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6/include' [ 31s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6/include' [ 31s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6/include' [ 31s] Making all in lib [ 31s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6/lib' [ 31s] cd .. && /bin/sh ./config.status lib/Makefile depfiles [ 32s] config.status: creating lib/Makefile [ 32s] config.status: executing depfiles commands [ 32s] CC fuse.lo [ 32s] CC fuse_lowlevel.lo [ 32s] CC fuse_loop.lo [ 32s] CC fuse_kern_chan.lo [ 32s] CC fuse_opt.lo [ 32s] CC fuse_loop_mt.lo [ 32s] CC fuse_session.lo [ 32s] CC fuse_mt.lo [ 32s] CC fuse_signals.lo [ 32s] CC buffer.lo [ 32s] CC cuse_lowlevel.lo [ 32s] CC helper.lo [ 32s] helper.c: In function 'fuse_daemonize': [ 32s] helper.c:204:3: warning: ignoring return value of 'chdir', declared with attribute warn_unused_result [-Wunused-result] [ 32s] (void) chdir("/"); [ 32s] ^ [ 32s] CC mount.lo [ 32s] CC mount_util.lo [ 32s] CC ulockmgr.lo [ 32s] mount_util.c: In function 'mtab_needs_update': [ 32s] mount_util.c:62:4: warning: ignoring return value of 'setreuid', declared with attribute warn_unused_result [-Wunused-result] [ 32s] setreuid(0, -1); [ 32s] ^ [ 32s] mount_util.c:67:4: warning: ignoring return value of 'setreuid', declared with attribute warn_unused_result [-Wunused-result] [ 32s] setreuid(ruid, -1); [ 32s] ^ [ 32s] mount_util.c: In function 'add_mount': [ 32s] mount_util.c:102:3: warning: ignoring return value of 'setuid', declared with attribute warn_unused_result [-Wunused-result] [ 32s] setuid(geteuid()); [ 32s] ^ [ 32s] mount_util.c: In function 'exec_umount': [ 32s] mount_util.c:155:3: warning: ignoring return value of 'setuid', declared with attribute warn_unused_result [-Wunused-result] [ 32s] setuid(geteuid()); [ 32s] ^ [ 32s] mount_util.c: In function 'remove_mount': [ 32s] mount_util.c:221:3: warning: ignoring return value of 'setuid', declared with attribute warn_unused_result [-Wunused-result] [ 32s] setuid(geteuid()); [ 32s] ^ [ 32s] CC modules/subdir.lo [ 32s] CC modules/iconv.lo [ 32s] CCLD libulockmgr.la [ 34s] CCLD libfuse.la [ 35s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6/lib' [ 35s] Making all in util [ 35s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6/util' [ 35s] cd .. && /bin/sh ./config.status util/Makefile depfiles [ 35s] config.status: creating util/Makefile [ 35s] config.status: executing depfiles commands [ 35s] make all-am [ 35s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6/util' [ 35s] CC fusermount-fusermount.o [ 35s] CC fusermount-mount_util.o [ 35s] CC ulockmgr_server-ulockmgr_server.o [ 35s] CC mount.fuse.o [ 35s] ulockmgr_server.c: In function 'main': [ 35s] ulockmgr_server.c:371:2: warning: ignoring return value of 'chdir', declared with attribute warn_unused_result [-Wunused-result] [ 35s] (void) chdir("/"); [ 35s] ^ [ 35s] mount_util.c: In function 'mtab_needs_update': [ 35s] mount_util.c:62:4: warning: ignoring return value of 'setreuid', declared with attribute warn_unused_result [-Wunused-result] [ 35s] setreuid(0, -1); [ 35s] ^ [ 35s] mount_util.c:67:4: warning: ignoring return value of 'setreuid', declared with attribute warn_unused_result [-Wunused-result] [ 35s] setreuid(ruid, -1); [ 35s] ^ [ 35s] mount_util.c: In function 'add_mount': [ 35s] mount_util.c:102:3: warning: ignoring return value of 'setuid', declared with attribute warn_unused_result [-Wunused-result] [ 35s] setuid(geteuid()); [ 35s] ^ [ 35s] mount_util.c: In function 'exec_umount': [ 35s] mount_util.c:155:3: warning: ignoring return value of 'setuid', declared with attribute warn_unused_result [-Wunused-result] [ 35s] setuid(geteuid()); [ 35s] ^ [ 35s] mount_util.c: In function 'remove_mount': [ 35s] mount_util.c:221:3: warning: ignoring return value of 'setuid', declared with attribute warn_unused_result [-Wunused-result] [ 35s] setuid(geteuid()); [ 35s] ^ [ 35s] CCLD mount.fuse [ 35s] CCLD ulockmgr_server [ 35s] CCLD fusermount [ 35s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6/util' [ 35s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6/util' [ 35s] Making all in doc [ 35s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6/doc' [ 35s] cd .. && /bin/sh ./config.status doc/Makefile [ 36s] config.status: creating doc/Makefile [ 36s] make[1]: Nothing to be done for 'all'. [ 36s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6/doc' [ 36s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6' [ 36s] make[1]: Nothing to be done for 'all-am'. [ 36s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6' [ 36s] + exit 0 [ 36s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.QSyLCX [ 36s] + umask 022 [ 36s] + cd /home/abuild/rpmbuild/BUILD [ 36s] + cd fuse-2.9.6 [ 36s] + LANG=C [ 36s] + export LANG [ 36s] + unset DISPLAY [ 36s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm [ 36s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm [ 36s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm install [ 36s] Making install in include [ 36s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6/include' [ 36s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6/include' [ 36s] make[2]: Nothing to be done for 'install-exec-am'. [ 36s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/include/fuse' [ 36s] /bin/install -c -m 644 fuse.h fuse_compat.h fuse_common.h fuse_common_compat.h fuse_lowlevel.h fuse_lowlevel_compat.h fuse_opt.h cuse_lowlevel.h '/home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/include/fuse' [ 36s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/include' [ 36s] /bin/install -c -m 644 old/fuse.h ulockmgr.h '/home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/include' [ 36s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6/include' [ 36s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6/include' [ 36s] Making install in lib [ 36s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6/lib' [ 36s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6/lib' [ 36s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/lib' [ 36s] /bin/sh ../libtool --mode=install /bin/install -c libfuse.la libulockmgr.la '/home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/lib' [ 36s] libtool: install: /bin/install -c .libs/libfuse.so.2.9.6 /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/lib/libfuse.so.2.9.6 [ 36s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/lib && { ln -s -f libfuse.so.2.9.6 libfuse.so.2 || { rm -f libfuse.so.2 && ln -s libfuse.so.2.9.6 libfuse.so.2; }; }) [ 36s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/lib && { ln -s -f libfuse.so.2.9.6 libfuse.so || { rm -f libfuse.so && ln -s libfuse.so.2.9.6 libfuse.so; }; }) [ 36s] libtool: install: /bin/install -c .libs/libfuse.lai /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/lib/libfuse.la [ 36s] libtool: install: /bin/install -c .libs/libulockmgr.so.1.0.1 /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/lib/libulockmgr.so.1.0.1 [ 36s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/lib && { ln -s -f libulockmgr.so.1.0.1 libulockmgr.so.1 || { rm -f libulockmgr.so.1 && ln -s libulockmgr.so.1.0.1 libulockmgr.so.1; }; }) [ 36s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/lib && { ln -s -f libulockmgr.so.1.0.1 libulockmgr.so || { rm -f libulockmgr.so && ln -s libulockmgr.so.1.0.1 libulockmgr.so; }; }) [ 36s] libtool: install: /bin/install -c .libs/libulockmgr.lai /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/lib/libulockmgr.la [ 36s] libtool: install: /bin/install -c .libs/libfuse.a /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/lib/libfuse.a [ 36s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/lib/libfuse.a [ 36s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/lib/libfuse.a [ 36s] libtool: install: /bin/install -c .libs/libulockmgr.a /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/lib/libulockmgr.a [ 36s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/lib/libulockmgr.a [ 36s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/lib/libulockmgr.a [ 36s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 36s] make[2]: Nothing to be done for 'install-data-am'. [ 36s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6/lib' [ 36s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6/lib' [ 36s] Making install in util [ 36s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6/util' [ 36s] /bin/make install-am [ 36s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6/util' [ 36s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6/util' [ 36s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/bin' [ 36s] /bin/sh ../libtool --mode=install /bin/install -c fusermount ulockmgr_server '/home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/bin' [ 36s] libtool: install: /bin/install -c fusermount /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/bin/fusermount [ 36s] libtool: install: /bin/install -c ulockmgr_server /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/bin/ulockmgr_server [ 36s] /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/sbin [ 36s] /bin/install -c ./mount.fuse /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/sbin/mount.fuse [ 36s] /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/etc/init.d [ 36s] /bin/install -c ./init_script /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/etc/init.d/fuse [ 36s] /bin/make install-exec-hook [ 36s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6/util' [ 36s] chmod u+s /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/bin/fusermount [ 36s] mknod /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/dev/fuse -m 0666 c 10 229 || true [ 36s] mknod: `/home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/dev/fuse': Operation not permitted [ 36s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6/util' [ 36s] /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/etc/udev/rules.d [ 36s] /bin/install -c -m 644 ./udev.rules /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/etc/udev/rules.d/99-fuse.rules [ 36s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6/util' [ 36s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6/util' [ 36s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6/util' [ 36s] Making install in doc [ 36s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6/doc' [ 36s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6/doc' [ 36s] make[2]: Nothing to be done for 'install-exec-am'. [ 36s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/share/man/man1' [ 36s] /bin/install -c -m 644 fusermount.1 ulockmgr_server.1 '/home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/share/man/man1' [ 36s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/share/man/man8' [ 36s] /bin/install -c -m 644 mount.fuse.8 '/home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/share/man/man8' [ 36s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6/doc' [ 36s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6/doc' [ 36s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6' [ 36s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6' [ 36s] make[2]: Nothing to be done for 'install-exec-am'. [ 36s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/lib/pkgconfig' [ 36s] /bin/install -c -m 644 fuse.pc '/home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/lib/pkgconfig' [ 36s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6' [ 36s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/fuse-2.9.6' [ 36s] + rm -f /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/share/info/dir [ 36s] + find /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm -regex '.*\.la$' [ 36s] + xargs rm -f -- [ 36s] + find /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm -regex '.*\.a$' [ 36s] + xargs rm -f -- [ 36s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm//etc/init.d [ 36s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/fuse-2.9.6 [ 36s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/bin/fusermount [ 36s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/bin/ulockmgr_server [ 37s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/lib/libfuse.so.2.9.6 [ 37s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/lib/libulockmgr.so.1.0.1 [ 37s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/sbin/mount.fuse [ 37s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 37s] cpio: glibc-2.20/csu/init.c: Cannot stat: No such file or directory [ 37s] cpio: glibc-2.20/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 37s] cpio: glibc-2.20/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 37s] cpio: glibc-2.20/sysdeps/arm/start.S: Cannot stat: No such file or directory [ 37s] 967 blocks [ 37s] + /usr/lib/rpm/check-buildroot [ 37s] + /usr/lib/rpm//brp-compress [ 37s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 37s] + /usr/lib/rpm/brp-python-hardlink [ 37s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm [ 37s] Processing files: fuse-2.9.6-1.1.armv7l [ 37s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 37s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 37s] [ 37s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.hDqARP [ 37s] + umask 022 [ 37s] + cd /home/abuild/rpmbuild/BUILD [ 37s] + cd fuse-2.9.6 [ 37s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/share/licenses/fuse [ 37s] + export LICENSEDIR [ 37s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/share/licenses/fuse [ 37s] + cp -pr COPYING COPYING.LIB /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/share/licenses/fuse [ 37s] + exit 0 [ 37s] Provides: fuse = 2.9.6-1.1 fuse(armv7l-32) = 2.9.6-1.1 [ 37s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 37s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpthread.so.0 libpthread.so.0(GLIBC_2.4) rtld(GNU_HASH) [ 37s] Supplements: filesystem(fuse) [ 37s] Processing files: fuse-debugsource-2.9.6-1.1.armv7l [ 38s] Provides: fuse-debugsource = 2.9.6-1.1 fuse-debugsource(armv7l-32) = 2.9.6-1.1 [ 38s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 38s] Processing files: libulockmgr-2.9.6-1.1.armv7l [ 38s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 38s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 38s] [ 38s] Provides: libulockmgr = 2.9.6-1.1 libulockmgr(armv7l-32) = 2.9.6-1.1 libulockmgr.so.1 [ 38s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 38s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 38s] Requires(post): /sbin/ldconfig [ 38s] Requires(postun): /sbin/ldconfig [ 38s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpthread.so.0 libpthread.so.0(GLIBC_2.4) rtld(GNU_HASH) [ 38s] Processing files: libfuse-2.9.6-1.1.armv7l [ 38s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 38s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 38s] [ 38s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.SMBFlI [ 38s] + umask 022 [ 38s] + cd /home/abuild/rpmbuild/BUILD [ 38s] + cd fuse-2.9.6 [ 38s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/share/licenses/libfuse [ 38s] + export LICENSEDIR [ 38s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/share/licenses/libfuse [ 38s] + cp -pr COPYING.LIB /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm/usr/share/licenses/libfuse [ 38s] + exit 0 [ 38s] Provides: libfuse = 2.9.6-1.1 libfuse(armv7l-32) = 2.9.6-1.1 libfuse.so.2 libfuse.so.2(FUSE_2.2) libfuse.so.2(FUSE_2.4) libfuse.so.2(FUSE_2.5) libfuse.so.2(FUSE_2.6) libfuse.so.2(FUSE_2.7) libfuse.so.2(FUSE_2.7.5) libfuse.so.2(FUSE_2.8) libfuse.so.2(FUSE_2.9) libfuse.so.2(FUSE_2.9.1) [ 38s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 38s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 38s] Requires(post): /sbin/ldconfig [ 38s] Requires(postun): /sbin/ldconfig [ 38s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.17) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.5) libc.so.6(GLIBC_2.7) libdl.so.2 libdl.so.2(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpthread.so.0 libpthread.so.0(GLIBC_2.4) rtld(GNU_HASH) [ 38s] Processing files: fuse-devel-2.9.6-1.1.armv7l [ 38s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 38s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 38s] [ 38s] Provides: fuse-devel = 2.9.6-1.1 fuse-devel(armv7l-32) = 2.9.6-1.1 pkgconfig(fuse) = 2.9.6 [ 38s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 38s] Requires: /usr/bin/pkg-config libfuse.so.2 libulockmgr.so.1 [ 38s] Processing files: fuse-docs-2.9.6-1.1.armv7l [ 38s] Provides: fuse-docs = 2.9.6-1.1 fuse-docs(armv7l-32) = 2.9.6-1.1 [ 38s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 38s] Processing files: fuse-debuginfo-2.9.6-1.1.armv7l [ 38s] warning: File listed twice: /usr/lib/debug/.build-id [ 38s] warning: File listed twice: /usr/lib/debug/.build-id [ 38s] Provides: fuse-debuginfo = 2.9.6-1.1 fuse-debuginfo(armv7l-32) = 2.9.6-1.1 [ 38s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 38s] Processing files: libulockmgr-debuginfo-2.9.6-1.1.armv7l [ 38s] Provides: libulockmgr-debuginfo = 2.9.6-1.1 libulockmgr-debuginfo(armv7l-32) = 2.9.6-1.1 [ 38s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 38s] Processing files: libfuse-debuginfo-2.9.6-1.1.armv7l [ 38s] Provides: libfuse-debuginfo = 2.9.6-1.1 libfuse-debuginfo(armv7l-32) = 2.9.6-1.1 [ 38s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 38s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm [ 38s] warning: Could not canonicalize hostname: obspw03 [ 38s] Wrote: /home/abuild/rpmbuild/SRPMS/fuse-2.9.6-1.1.src.rpm [ 38s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/fuse-2.9.6-1.1.armv7l.rpm [ 38s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/fuse-debugsource-2.9.6-1.1.armv7l.rpm [ 38s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libulockmgr-2.9.6-1.1.armv7l.rpm [ 38s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libfuse-2.9.6-1.1.armv7l.rpm [ 38s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/fuse-devel-2.9.6-1.1.armv7l.rpm [ 38s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/fuse-docs-2.9.6-1.1.armv7l.rpm [ 38s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/fuse-debuginfo-2.9.6-1.1.armv7l.rpm [ 38s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libulockmgr-debuginfo-2.9.6-1.1.armv7l.rpm [ 38s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libfuse-debuginfo-2.9.6-1.1.armv7l.rpm [ 38s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.A22IsH [ 38s] + umask 022 [ 38s] + cd /home/abuild/rpmbuild/BUILD [ 38s] + cd fuse-2.9.6 [ 38s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/fuse-2.9.6-1.1.arm [ 38s] + exit 0 [ 38s] ... checking for files with abuild user/group [ 38s] ... creating baselibs [ 39s] no targets for arch armv7l, nothing to do [ 39s] [ 39s] obspw03 finished "build fuse.spec" at Sat Apr 22 21:05:46 UTC 2017. [ 39s] Retried build at Fri May 26 12:02:26 2017 returned same result, skipped Retried build at Fri Jun 9 08:59:44 2017 returned same result, skipped Retried build at Wed Jun 14 05:02:49 2017 returned same result, skipped Retried build at Fri Jul 14 04:31:41 2017 returned same result, skipped Retried build at Fri Jul 14 05:57:32 2017 returned same result, skipped Retried build at Wed Nov 8 01:20:35 2017 returned same result, skipped Retried build at Wed Nov 8 02:52:38 2017 returned same result, skipped Retried build at Fri Jul 13 15:40:48 2018 returned same result, skipped Retried build at Fri Jul 13 17:02:18 2018 returned same result, skipped Retried build at Fri May 17 01:46:24 2019 returned same result, skipped