[ 0s] Memory limit set to 82442244KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_2 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obspw02 started "build _service:gbs:gssdp.spec" at Sat Apr 22 22:24:13 UTC 2017. [ 0s] [ 0s] Building gssdp for project 'Tizen:3.0:TV' repository 'arm-wayland' arch 'armv7l' srcmd5 'ed868b37fefec7bb69b6833960d4dafd' [ 0s] [ 0s] processing recipe /var/cache/build/root_2/.build-srcdir/_service:gbs:gssdp.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_2/.build-srcdir/_service:gbs:gssdp.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_2/.build.rpmlist /var/cache/build/root_2/.build-srcdir/_service:gbs:gssdp.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] interpreter for 'aarch64' is -1 [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/2/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling setup... [ 1s] [3/40] preinstalling filesystem... [ 1s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling libgcc... [ 2s] [6/40] preinstalling bash... [ 2s] [7/40] preinstalling diffutils... [ 2s] [8/40] preinstalling grep... [ 2s] [9/40] preinstalling libattr... [ 2s] [10/40] preinstalling libbz2... [ 2s] [11/40] preinstalling libcap... [ 2s] [12/40] preinstalling libelf... [ 2s] [13/40] preinstalling libfreebl3... [ 2s] [14/40] preinstalling liblua... [ 2s] [15/40] preinstalling liblzma... [ 2s] [16/40] preinstalling libncurses... [ 2s] [17/40] preinstalling libpopt... [ 2s] [18/40] preinstalling libsmack... [ 2s] [19/40] preinstalling libsqlite... [ 2s] [20/40] preinstalling libuuid... [ 2s] [21/40] preinstalling nspr... [ 2s] [22/40] preinstalling sed... [ 2s] [23/40] preinstalling zlib... [ 2s] [24/40] preinstalling qemu-accel-x86_64-armv7l... [ 5s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 6s] [26/40] preinstalling coreutils... [ 6s] [27/40] preinstalling libacl... [ 6s] [28/40] preinstalling libblkid... [ 6s] [29/40] preinstalling libreadline... [ 6s] [30/40] preinstalling smack... [ 6s] [31/40] preinstalling bzip2... [ 6s] [32/40] preinstalling libmagic... [ 6s] [33/40] preinstalling libxml2... [ 7s] [34/40] preinstalling libmount... [ 7s] [35/40] preinstalling tar... [ 7s] [36/40] preinstalling util-linux... [ 7s] [37/40] preinstalling util-linux-su... [ 7s] [38/40] preinstalling nss... [ 7s] [39/40] preinstalling libsoftokn3... [ 7s] [40/40] preinstalling rpm... [ 7s] [ 7s] running qemu-linux-user-x86_64-cross postinstall script [ 7s] running qemu-accel-x86_64-armv7l postinstall script [ 7s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/liblto_plugin.so': No such file or directory [ 7s] running setup postinstall script [ 7s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 7s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 7s] initializing rpm db... [ 8s] reordering...cycle: gio-branding-upstream -> libgio [ 8s] breaking dependency libgio -> gio-branding-upstream [ 8s] cycle: libsoftokn3 -> nss [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] done [ 8s] [1/139] installing default-ac-domains-0.1-1.1 [ 8s] [2/139] installing libmagic-data-5.28-1.19 [ 8s] [3/139] installing setup-0.9-1.8 [ 8s] [4/139] installing terminfo-base-5.9-1.21 [ 8s] [5/139] installing filesystem-3.1-1.2 [ 8s] [6/139] installing glibc-2.20-1.2 [ 9s] [7/139] installing libatomic-4.9.2-1.6 [ 9s] [8/139] installing libgcc-4.9.2-1.6 [ 9s] [9/139] installing libgomp-4.9.2-1.6 [ 9s] [10/139] installing bash-3.2.57-2.1 [ 9s] [11/139] installing cpio-2.11-1.3 [ 9s] [12/139] installing diffutils-3.3-1.3 [ 9s] [13/139] installing findutils-4.3.8-1.22 [ 9s] [14/139] installing hostname-3.12-1.3 [ 9s] [15/139] installing libattr-2.4.47-1.21 [ 9s] [16/139] installing libbz2-1.0.6-1.43 [ 9s] [17/139] installing libcap-2.24-1.21 [ 9s] [18/139] installing libelf-0.153-1.25 [ 10s] [19/139] installing libelf0-0.8.13-1.3 [ 10s] [20/139] installing libexpat-2.2.0-1.20 [ 10s] [21/139] installing libext2fs-1.42.13-1.2 [ 10s] [22/139] installing libffi-3.1-1.3 [ 10s] [23/139] installing libfreebl3-3.23-1.37 [ 10s] [24/139] installing libgmp-4.2.1-1.3 [ 10s] [25/139] installing libitm-4.9.2-1.6 [ 10s] [26/139] installing libltdl-2.4.2-1.25 [ 10s] [27/139] installing liblua-5.1.4-1.5 [ 10s] [28/139] installing liblzma-5.2.2-1.19 [ 10s] [29/139] installing libnettle-2.7.1-1.1 [ 11s] [30/139] installing libpcre-8.39-1.3 [ 11s] [31/139] installing libpopt-1.16-1.5 [ 11s] [32/139] installing libpython-2.7.8-1.11 [ 11s] [33/139] installing libsmack-1.3.0-1.20 [ 11s] [34/139] installing libsmartcols-2.28-1.3 [ 11s] [35/139] installing libsqlite-3.8.10.2-1.5 [ 11s] [36/139] installing libstdc++-4.9.2-1.6 [ 11s] [37/139] installing libtasn1-4.8-1.1 [ 11s] [38/139] installing libuuid-2.28-1.3 [ 12s] [39/139] installing m4-1.4.17-1.3 [ 12s] [40/139] installing net-tools-2.0_20121208git-1.3 [ 12s] [41/139] installing nspr-4.12-1.10 [ 12s] [42/139] installing patch-2.7-1.5 [ 12s] [43/139] installing pkg-config-0.28-1.24 [ 12s] [44/139] installing sed-4.1c-1.3 [ 12s] [45/139] installing update-alternatives-1.16.3-1.3 [ 12s] [46/139] installing which-2.20-1.3 [ 12s] [47/139] installing zlib-1.2.8-1.25 [ 12s] [48/139] installing libncurses-5.9-1.21 [ 12s] [49/139] installing libncurses6-5.9-1.21 [ 12s] [50/139] installing shadow-utils-4.1.4.2-1.2 [ 12s] [51/139] installing build-compare-2015.04.28-1.16 [ 12s] [52/139] installing libstdc++-devel-4.9.2-1.6 [ 13s] [53/139] installing qemu-linux-user-x86_64-cross-2.7.0-1.4.1 [ 14s] [54/139] installing cpp-4.9.2-1.6 [ 14s] [55/139] installing gcc-c++-4.9.2-1.6 [ 15s] [56/139] installing xz-devel-5.2.2-1.19 [ 15s] [57/139] installing binutils-2.25-1.11 [ 15s] [58/139] installing coreutils-6.9-1.3 [ 15s] [59/139] installing db4-4.8.30.NC-1.28 [ 16s] [60/139] installing gawk-3.1.5-1.3 [ 16s] [61/139] installing grep-2.5.2-1.3 [ 16s] [62/139] installing less-466-1.3 [ 16s] [63/139] installing libacl-2.2.52-1.22 [ 16s] [64/139] installing libasm-0.153-1.25 [ 16s] [65/139] installing libblkid-2.28-1.3 [ 16s] [66/139] installing libcap-tools-2.24-1.21 [ 16s] [67/139] installing libglib-2.44.1-1.1 [ 16s] [68/139] installing libopenssl-1.0.2j-1.22 [ 16s] [69/139] installing libpcreposix-8.39-1.3 [ 16s] [70/139] installing libreadline-5.2-1.20 [ 17s] [71/139] installing libubsan-4.9.2-1.6 [ 17s] [72/139] installing make-4.0-1.5 [ 17s] [73/139] installing nss-certs-3.23-1.37 [ 17s] [74/139] installing smack-1.3.0-1.20 [ 17s] [75/139] installing bzip2-1.0.6-1.43 [ 17s] [76/139] installing libhogweed-2.7.1-1.1 [ 17s] [77/139] installing libmagic-5.28-1.19 [ 17s] [78/139] installing libpcrecpp-8.39-1.3 [ 17s] [79/139] installing libxml2-2.9.4-2.17 [ 17s] [80/139] installing xz-5.2.2-1.19 [ 17s] [81/139] installing cynara-db-migration-0.14.10-1.1 [ 17s] [82/139] installing libdw-0.153-1.25 [ 18s] [83/139] installing ncurses-devel-5.9-1.21 [ 18s] [84/139] installing linux-glibc-devel-3.10-1.26 [ 18s] [85/139] installing readline-devel-5.2-1.20 [ 18s] [86/139] installing file-5.28-1.19 [ 18s] [87/139] installing glibc-locale-2.20-1.2 [ 19s] [88/139] installing libgmodule-2.44.1-1.1 [ 19s] [89/139] installing libgthread-2.44.1-1.1 [ 19s] [90/139] installing libmount-2.28-1.3 [ 19s] [91/139] installing security-config-1.0-1.1 [ 29s] usermod: user 'buxton' does not exist [ 29s] usermod: user 'dbus' does not exist [ 29s] [92/139] installing tar-1.17-1.3 [ 29s] [93/139] installing gzip-1.3.12-1.21 [ 29s] [94/139] installing libfdisk1-2.28-1.3 [ 29s] [95/139] installing libgobject-2.44.1-1.1 [ 29s] [96/139] installing libxml2-tools-2.9.4-2.17 [ 29s] [97/139] installing pam-1.1.6-1.2 [ 29s] [98/139] installing perl-5.20.0-1.27 [ 30s] [99/139] installing tzdata-2016i-1.1 [ 31s] [100/139] installing pcre-devel-8.39-1.3 [ 31s] [101/139] installing elfutils-0.153-1.25 [ 31s] [102/139] installing gcc-4.9.2-1.6 [ 31s] [103/139] installing libcynara-commons-0.14.10-1.1 [ 32s] [104/139] installing libgnutls-3.3.5-1.1 [ 32s] [105/139] installing shared-mime-info-1.3-1.1 [ 39s] [106/139] installing python-2.7.8-1.11 [ 39s] [107/139] installing build-mkbaselibs-20120927-1.3 [ 40s] [108/139] installing ca-certificates-0.0.4-1.1 [ 40s] [109/139] installing glibc-devel-2.20-1.2 [ 40s] [110/139] installing qemu-accel-x86_64-armv7l-0.4-1.2 [ 44s] [111/139] installing autoconf-2.69-1.28 [ 44s] [112/139] installing libcynara-client-0.14.10-1.1 [ 44s] [113/139] installing libcynara-session-0.14.10-1.1 [ 44s] [114/139] installing python-xml-2.7.8-1.11 [ 44s] [115/139] installing libsystemd-219-1.1 [ 44s] [116/139] installing util-linux-2.28-1.3 [ 44s] [117/139] installing zlib-devel-1.2.8-1.25 [ 44s] [118/139] installing automake-1.14.1-1.23 [ 45s] [119/139] installing util-linux-su-2.28-1.3 [ 45s] [120/139] installing build-20120927-1.3 [ 45s] [121/139] installing libdbuspolicy-1.0.0-1.1 [ 45s] [122/139] installing libdlog-0.5.1-1.1 [ 45s] [123/139] installing libtool-2.4.2-1.25 [ 45s] [124/139] installing dbus-libs-1.10.6-2.1 [ 45s] [125/139] installing libxml2-devel-2.9.4-2.17 [ 45s] [126/139] installing dbus-devel-1.10.6-2.1 [ 45s] [127/139] installing nss-3.23-1.37 [ 45s] [128/139] installing libgio-2.44.1-1.1 [ 46s] [129/139] installing gio-branding-upstream-2.44.1-1.1 [ 46s] [130/139] installing dbus-glib-0.100.2-2.1 [ 46s] [131/139] installing libsoftokn3-3.23-1.37 [ 46s] [132/139] installing glib2-tools-2.44.1-1.1 [ 46s] [133/139] installing glib-networking-2.38.0-1.1 [ 46s] [134/139] installing rpm-4.11.0.1-1.14 [ 46s] [135/139] installing libsoup-2.46.0-1.1 [ 46s] [136/139] installing glib2-devel-2.44.1-1.1 [ 47s] [137/139] installing rpm-build-4.11.0.1-1.14 [ 47s] [138/139] installing libsoup-devel-2.46.0-1.1 [ 47s] [139/139] installing dbus-glib-devel-0.100.2-2.1 [ 47s] removing nis flags from /var/cache/build/root_2/etc/nsswitch.conf... [ 47s] now finalizing build dir... [ 48s] build target is armv7l-tizen-linux [ 48s] ----------------------------------------------------------------- [ 48s] I have the following modifications for gssdp.spec: [ 48s] 11c11 [ 48s] < Release: 1 [ 48s] --- [ 48s] > Release: 1.1 [ 48s] ----------------------------------------------------------------- [ 48s] ----- building gssdp.spec (user abuild) [ 48s] ----------------------------------------------------------------- [ 48s] ----------------------------------------------------------------- [ 48s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0:TV/arm-wayland/ed868b37fefec7bb69b6833960d4dafd-gssdp' -ba /home/abuild/rpmbuild/SOURCES/gssdp.spec [ 48s] Building target platforms: armv7l-tizen-linux [ 48s] Building for target armv7l-tizen-linux [ 48s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.9RzTPy [ 48s] + umask 022 [ 48s] + cd /home/abuild/rpmbuild/BUILD [ 48s] + cd /home/abuild/rpmbuild/BUILD [ 48s] + rm -rf gssdp-0.14.4 [ 48s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/gssdp-0.14.4.tar.xz [ 48s] + /bin/tar -xf - [ 48s] + STATUS=0 [ 48s] + '[' 0 -ne 0 ']' [ 48s] + cd gssdp-0.14.4 [ 48s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 48s] + echo 'Patch #0 (2788270-to-9eb6824.diff.gz):' [ 48s] Patch #0 (2788270-to-9eb6824.diff.gz): [ 48s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/2788270-to-9eb6824.diff.gz [ 48s] + /bin/patch -p1 --fuzz=2 [ 48s] patching file INSTALL [ 48s] patching file Makefile.in [ 48s] patching file aclocal.m4 [ 48s] patching file build-aux/depcomp [ 48s] patching file build-aux/missing [ 48s] patching file build-aux/test-driver [ 48s] patching file configure [ 48s] patching file doc/Makefile.in [ 48s] patching file doc/html/GSSDPClient.html [ 48s] patching file doc/html/GSSDPResourceBrowser.html [ 48s] patching file doc/html/GSSDPResourceGroup.html [ 48s] patching file doc/html/annotation-glossary.html [ 48s] patching file doc/html/ch01.html [ 48s] patching file doc/html/gssdp-Error-codes.html [ 48s] patching file doc/html/home.png [ 48s] patching file doc/html/index.html [ 48s] patching file doc/html/left.png [ 48s] patching file doc/html/right.png [ 48s] patching file doc/html/up.png [ 48s] patching file gssdp.manifest [ 48s] patching file gtk-doc.make [ 48s] patching file libgssdp/Makefile.in [ 48s] patching file m4/gtk-doc.m4 [ 48s] patching file m4/libtool.m4 [ 48s] patching file m4/ltoptions.m4 [ 48s] patching file m4/ltsugar.m4 [ 48s] patching file m4/ltversion.m4 [ 48s] patching file m4/lt~obsolete.m4 [ 48s] patching file tests/Makefile.in [ 48s] patching file tests/gtest/Makefile.in [ 48s] patching file tools/Makefile.in [ 48s] patching file vala/Makefile.in [ 48s] + exit 0 [ 48s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.AcUStb [ 48s] + umask 022 [ 48s] + cd /home/abuild/rpmbuild/BUILD [ 48s] + cd gssdp-0.14.4 [ 48s] ++ uname -m [ 48s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 48s] + LANG=C [ 48s] + export LANG [ 48s] + unset DISPLAY [ 48s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 48s] + export CFLAGS [ 48s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 48s] + export CXXFLAGS [ 48s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 48s] + export FFLAGS [ 48s] + LDFLAGS= [ 48s] + export LDFLAGS [ 48s] + LD_AS_NEEDED=1 [ 48s] + export LD_AS_NEEDED [ 48s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 48s] + export CFLAGS [ 48s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 48s] + export CXXFLAGS [ 48s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 48s] + export FFLAGS [ 48s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --enable-introspection=no --enable-gtk-doc-html=no [ 49s] checking for a BSD-compatible install... /usr/bin/install -c [ 50s] checking whether build environment is sane... yes [ 50s] checking for a thread-safe mkdir -p... /usr/bin/mkdir -p [ 50s] checking for gawk... gawk [ 50s] checking whether make sets $(MAKE)... yes [ 50s] checking how to create a ustar tar archive... gnutar [ 50s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 50s] checking for style of include used by make... GNU [ 50s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 50s] checking whether the C compiler works... yes [ 50s] checking for C compiler default output file name... a.out [ 50s] checking for suffix of executables... [ 50s] checking whether we are cross compiling... no [ 50s] checking for suffix of object files... o [ 50s] checking whether we are using the GNU C compiler... yes [ 50s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 50s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 51s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 51s] checking what warning flags to pass to the C compiler... -Wall -Wmissing-prototypes [ 51s] checking what language compliance flags to pass to the C compiler... [ 51s] checking whether make supports nested variables... yes [ 51s] checking for library containing strerror... none required [ 51s] checking for armv7l-tizen-linux-gnueabi-gcc... (cached) armv7l-tizen-linux-gnueabi-gcc [ 51s] checking whether we are using the GNU C compiler... (cached) yes [ 51s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... (cached) yes [ 51s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... (cached) none needed [ 51s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... (cached) gcc3 [ 51s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 51s] checking for grep that handles long lines and -e... /usr/bin/grep [ 51s] checking for egrep... /usr/bin/grep -E [ 51s] checking for ANSI C header files... yes [ 51s] checking build system type... armv7l-tizen-linux-gnueabi [ 51s] checking host system type... armv7l-tizen-linux-gnueabi [ 51s] checking how to print strings... printf [ 51s] checking for a sed that does not truncate output... /usr/bin/sed [ 51s] checking for fgrep... /usr/bin/grep -F [ 51s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 51s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 51s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 51s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 51s] checking whether ln -s works... yes [ 51s] checking the maximum length of command line arguments... 1572864 [ 51s] checking whether the shell understands some XSI constructs... yes [ 51s] checking whether the shell understands "+="... yes [ 51s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 51s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 51s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 51s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 51s] checking for objdump... objdump [ 51s] checking how to recognize dependent libraries... pass_all [ 51s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 51s] checking for dlltool... no [ 51s] checking how to associate runtime and link libraries... printf %s\n [ 51s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 51s] checking for ar... ar [ 51s] checking for archiver @FILE support... @ [ 51s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 51s] checking for strip... strip [ 51s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 51s] checking for ranlib... ranlib [ 51s] checking command to parse /usr/bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 51s] checking for sysroot... no [ 51s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 51s] checking for mt... no [ 51s] checking if : is a manifest tool... no [ 52s] checking for sys/types.h... yes [ 52s] checking for sys/stat.h... yes [ 52s] checking for stdlib.h... yes [ 52s] checking for string.h... yes [ 52s] checking for memory.h... yes [ 52s] checking for strings.h... yes [ 52s] checking for inttypes.h... yes [ 52s] checking for stdint.h... yes [ 52s] checking for unistd.h... yes [ 52s] checking for dlfcn.h... yes [ 52s] checking for objdir... .libs [ 52s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 52s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 52s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 52s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 52s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 52s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 52s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 53s] checking whether -lc should be explicitly linked in... no [ 53s] checking dynamic linker characteristics... GNU/Linux ld.so [ 53s] checking how to hardcode library paths into programs... immediate [ 53s] checking whether stripping libraries is possible... yes [ 53s] checking if libtool supports shared libraries... yes [ 53s] checking whether to build shared libraries... yes [ 53s] checking whether to build static libraries... yes [ 53s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /usr/bin/armv7l-tizen-linux-gnueabi-pkg-config [ 53s] checking pkg-config is at least version 0.9.0... yes [ 53s] checking for LIBGSSDP... yes [ 53s] checking for LIBGTK... no [ 53s] configure: WARNING: gtk+ 3.0 or greater not found, some tools will not build. [ 53s] checking for gobject-introspection... no (disabled, use --enable-introspection to enable) [ 53s] checking for Win32... no [ 53s] checking for gtkdoc-check... no [ 53s] checking for gtkdoc-rebase... no [ 53s] checking for gtkdoc-mkpdf... no [ 53s] checking whether to build gtk-doc documentation... no [ 53s] configure: creating ./config.status [ 54s] config.status: creating Makefile [ 54s] config.status: creating libgssdp/Makefile [ 54s] config.status: creating tools/Makefile [ 54s] config.status: creating tests/Makefile [ 54s] config.status: creating tests/gtest/Makefile [ 54s] config.status: creating vala/Makefile [ 55s] config.status: creating doc/Makefile [ 55s] config.status: creating doc/version.xml [ 55s] config.status: creating gssdp-1.0.pc [ 55s] config.status: creating gssdp-1.0-uninstalled.pc [ 55s] config.status: creating config.h [ 55s] config.status: executing depfiles commands [ 56s] config.status: executing libtool commands [ 56s] [ 56s] gssdp 0.14.4 [ 56s] --------------------- [ 56s] [ 56s] Prefix: /usr [ 56s] GObject-Introspection: no (disabled, use --enable-introspection to enable) [ 56s] VALA bindings: no [ 56s] [ 56s] + make -j8 [ 56s] CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /home/abuild/rpmbuild/BUILD/gssdp-0.14.4/build-aux/missing --run aclocal-1.11 -I m4 [ 56s] /home/abuild/rpmbuild/BUILD/gssdp-0.14.4/build-aux/missing: line 52: aclocal-1.11: command not found [ 56s] WARNING: `aclocal-1.11' is missing on your system. You should only need it if [ 56s] you modified `acinclude.m4' or `configure.ac'. You might want [ 56s] to install the `Automake' and `Perl' packages. Grab them from [ 56s] any GNU archive site. [ 56s] CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /home/abuild/rpmbuild/BUILD/gssdp-0.14.4/build-aux/missing --run autoconf [ 56s] cd . && /bin/sh /home/abuild/rpmbuild/BUILD/gssdp-0.14.4/build-aux/missing --run automake-1.11 --gnu [ 56s] /home/abuild/rpmbuild/BUILD/gssdp-0.14.4/build-aux/missing: line 52: automake-1.11: command not found [ 56s] WARNING: `automake-1.11' is missing on your system. You should only need it if [ 56s] you modified `Makefile.am', `acinclude.m4' or `configure.ac'. [ 56s] You might want to install the `Automake' and `Perl' packages. [ 56s] Grab them from any GNU archive site. [ 59s] /bin/sh ./config.status --recheck [ 60s] running CONFIG_SHELL=/bin/sh /bin/sh ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --enable-introspection=no --enable-gtk-doc-html=no build_alias=armv7l-tizen-linux-gnueabi host_alias=armv7l-tizen-linux-gnueabi CFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g LDFLAGS= --no-create --no-recursion [ 60s] checking for a BSD-compatible install... /usr/bin/install -c [ 61s] checking whether build environment is sane... yes [ 61s] checking for a thread-safe mkdir -p... /usr/bin/mkdir -p [ 61s] checking for gawk... gawk [ 61s] checking whether make sets $(MAKE)... yes [ 61s] checking how to create a ustar tar archive... gnutar [ 61s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 61s] checking for style of include used by make... GNU [ 61s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 61s] checking whether the C compiler works... yes [ 61s] checking for C compiler default output file name... a.out [ 61s] checking for suffix of executables... [ 61s] checking whether we are cross compiling... no [ 61s] checking for suffix of object files... o [ 62s] checking whether we are using the GNU C compiler... yes [ 62s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 62s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 62s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 62s] checking what warning flags to pass to the C compiler... -Wall -Wmissing-prototypes [ 62s] checking what language compliance flags to pass to the C compiler... [ 62s] checking whether make supports nested variables... yes [ 62s] checking for library containing strerror... none required [ 62s] checking for armv7l-tizen-linux-gnueabi-gcc... (cached) armv7l-tizen-linux-gnueabi-gcc [ 62s] checking whether we are using the GNU C compiler... (cached) yes [ 62s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... (cached) yes [ 62s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... (cached) none needed [ 62s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... (cached) gcc3 [ 62s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 62s] checking for grep that handles long lines and -e... /usr/bin/grep [ 62s] checking for egrep... /usr/bin/grep -E [ 62s] checking for ANSI C header files... yes [ 62s] checking build system type... armv7l-tizen-linux-gnueabi [ 62s] checking host system type... armv7l-tizen-linux-gnueabi [ 62s] checking how to print strings... printf [ 62s] checking for a sed that does not truncate output... /usr/bin/sed [ 62s] checking for fgrep... /usr/bin/grep -F [ 62s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 62s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 62s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 62s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 62s] checking whether ln -s works... yes [ 62s] checking the maximum length of command line arguments... 1572864 [ 62s] checking whether the shell understands some XSI constructs... yes [ 62s] checking whether the shell understands "+="... yes [ 62s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 62s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 62s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 62s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 62s] checking for objdump... objdump [ 62s] checking how to recognize dependent libraries... pass_all [ 62s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 62s] checking for dlltool... no [ 62s] checking how to associate runtime and link libraries... printf %s\n [ 62s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 62s] checking for ar... ar [ 63s] checking for archiver @FILE support... @ [ 63s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 63s] checking for strip... strip [ 63s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 63s] checking for ranlib... ranlib [ 63s] checking command to parse /usr/bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 63s] checking for sysroot... no [ 63s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 63s] checking for mt... no [ 63s] checking if : is a manifest tool... no [ 63s] checking for sys/types.h... yes [ 63s] checking for sys/stat.h... yes [ 63s] checking for stdlib.h... yes [ 63s] checking for string.h... yes [ 63s] checking for memory.h... yes [ 63s] checking for strings.h... yes [ 63s] checking for inttypes.h... yes [ 63s] checking for stdint.h... yes [ 63s] checking for unistd.h... yes [ 63s] checking for dlfcn.h... yes [ 63s] checking for objdir... .libs [ 63s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 63s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 63s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 64s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 64s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 64s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 64s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 64s] checking whether -lc should be explicitly linked in... no [ 64s] checking dynamic linker characteristics... GNU/Linux ld.so [ 64s] checking how to hardcode library paths into programs... immediate [ 64s] checking whether stripping libraries is possible... yes [ 64s] checking if libtool supports shared libraries... yes [ 64s] checking whether to build shared libraries... yes [ 64s] checking whether to build static libraries... yes [ 64s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /usr/bin/armv7l-tizen-linux-gnueabi-pkg-config [ 64s] checking pkg-config is at least version 0.9.0... yes [ 64s] checking for LIBGSSDP... yes [ 64s] checking for LIBGTK... no [ 64s] configure: WARNING: gtk+ 3.0 or greater not found, some tools will not build. [ 64s] checking for gobject-introspection... no (disabled, use --enable-introspection to enable) [ 64s] checking for Win32... no [ 64s] checking for gtkdoc-check... no [ 64s] checking for gtkdoc-rebase... no [ 64s] checking for gtkdoc-mkpdf... no [ 64s] checking whether to build gtk-doc documentation... no [ 64s] configure: creating ./config.status [ 65s] [ 65s] gssdp 0.14.4 [ 65s] --------------------- [ 65s] [ 65s] Prefix: /usr [ 65s] GObject-Introspection: no (disabled, use --enable-introspection to enable) [ 65s] VALA bindings: no [ 65s] [ 65s] /bin/sh ./config.status [ 65s] config.status: creating Makefile [ 66s] config.status: creating libgssdp/Makefile [ 66s] config.status: creating tools/Makefile [ 66s] config.status: creating tests/Makefile [ 66s] config.status: creating tests/gtest/Makefile [ 66s] config.status: creating vala/Makefile [ 66s] config.status: creating doc/Makefile [ 66s] config.status: creating doc/version.xml [ 66s] config.status: creating gssdp-1.0.pc [ 66s] config.status: creating gssdp-1.0-uninstalled.pc [ 66s] config.status: creating config.h [ 66s] config.status: config.h is unchanged [ 66s] config.status: executing depfiles commands [ 66s] config.status: executing libtool commands [ 67s] (CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /home/abuild/rpmbuild/BUILD/gssdp-0.14.4/build-aux/missing --run autoheader) [ 68s] rm -f stamp-h1 [ 68s] touch config.h.in [ 68s] cd . && /bin/sh ./config.status config.h [ 69s] config.status: creating config.h [ 69s] config.status: config.h is unchanged [ 69s] make all-recursive [ 69s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4' [ 69s] Making all in libgssdp [ 69s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 69s] make all-am [ 69s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 69s] CC gssdp-client.lo [ 69s] CC gssdp-error.lo [ 69s] CC gssdp-resource-browser.lo [ 69s] CC gssdp-resource-group.lo [ 69s] CC gssdp-socket-functions.lo [ 69s] CC gssdp-socket-source.lo [ 69s] CC gssdp-marshal.lo [ 69s] CCLD libgssdp-1.0.la [ 70s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 70s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 70s] Making all in tests [ 70s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 70s] Making all in gtest [ 70s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests/gtest' [ 70s] CC test-util.o [ 70s] AR libtestutil.a [ 70s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests/gtest' [ 70s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 70s] CC test-browser.o [ 70s] CC test-publish.o [ 70s] CCLD test-publish [ 70s] CCLD test-browser [ 70s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 70s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 70s] Making all in doc [ 70s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/doc' [ 70s] make[2]: Nothing to be done for 'all'. [ 70s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/doc' [ 70s] Making all in vala [ 70s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/vala' [ 70s] make[2]: Nothing to be done for 'all'. [ 70s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/vala' [ 70s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4' [ 70s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4' [ 70s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4' [ 70s] + exit 0 [ 70s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.eV8MTV [ 70s] + umask 022 [ 70s] + cd /home/abuild/rpmbuild/BUILD [ 70s] + cd gssdp-0.14.4 [ 70s] + LANG=C [ 70s] + export LANG [ 70s] + unset DISPLAY [ 70s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm [ 70s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm [ 70s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm [ 70s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm install [ 70s] Making install in libgssdp [ 70s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 70s] /bin/make install-am [ 70s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 70s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 70s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/lib' [ 70s] /bin/sh ../libtool --mode=install /usr/bin/install -c libgssdp-1.0.la '/home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/lib' [ 70s] libtool: install: /usr/bin/install -c .libs/libgssdp-1.0.so.3.0.0 /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/lib/libgssdp-1.0.so.3.0.0 [ 70s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/lib && { ln -s -f libgssdp-1.0.so.3.0.0 libgssdp-1.0.so.3 || { rm -f libgssdp-1.0.so.3 && ln -s libgssdp-1.0.so.3.0.0 libgssdp-1.0.so.3; }; }) [ 71s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/lib && { ln -s -f libgssdp-1.0.so.3.0.0 libgssdp-1.0.so || { rm -f libgssdp-1.0.so && ln -s libgssdp-1.0.so.3.0.0 libgssdp-1.0.so; }; }) [ 71s] libtool: install: /usr/bin/install -c .libs/libgssdp-1.0.lai /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/lib/libgssdp-1.0.la [ 71s] libtool: install: /usr/bin/install -c .libs/libgssdp-1.0.a /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/lib/libgssdp-1.0.a [ 71s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/lib/libgssdp-1.0.a [ 71s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/lib/libgssdp-1.0.a [ 71s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 71s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/include/gssdp-1.0/libgssdp' [ 71s] /usr/bin/install -c -m 644 gssdp-client.h gssdp-error.h gssdp-resource-browser.h gssdp-resource-group.h gssdp.h '/home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/include/gssdp-1.0/libgssdp' [ 71s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 71s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 71s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 71s] Making install in tests [ 71s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 71s] Making install in gtest [ 71s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests/gtest' [ 71s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests/gtest' [ 71s] make[3]: Nothing to be done for 'install-exec-am'. [ 71s] make[3]: Nothing to be done for 'install-data-am'. [ 71s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests/gtest' [ 71s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests/gtest' [ 71s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 71s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 71s] make[3]: Nothing to be done for 'install-exec-am'. [ 71s] make[3]: Nothing to be done for 'install-data-am'. [ 71s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 71s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 71s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 71s] Making install in doc [ 71s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/doc' [ 71s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/doc' [ 71s] make[2]: Nothing to be done for 'install-exec-am'. [ 71s] /usr/bin/install -c -m 644 ./html/GSSDPClient.html [ 71s] /usr/bin/install -c -m 644 ./html/GSSDPResourceBrowser.html [ 71s] /usr/bin/install -c -m 644 ./html/GSSDPResourceGroup.html [ 71s] /usr/bin/install -c -m 644 ./html/annotation-glossary.html [ 71s] /usr/bin/install -c -m 644 ./html/ch01.html [ 71s] /usr/bin/install -c -m 644 ./html/gssdp-Error-codes.html [ 71s] /usr/bin/install -c -m 644 ./html/gssdp.devhelp2 [ 71s] /usr/bin/install -c -m 644 ./html/home.png [ 71s] /usr/bin/install -c -m 644 ./html/index.html [ 71s] /usr/bin/install -c -m 644 ./html/index.sgml [ 71s] /usr/bin/install -c -m 644 ./html/left.png [ 71s] /usr/bin/install -c -m 644 ./html/right.png [ 71s] /usr/bin/install -c -m 644 ./html/style.css [ 71s] /usr/bin/install -c -m 644 ./html/up.png [ 71s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/doc' [ 71s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/doc' [ 71s] Making install in vala [ 71s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/vala' [ 71s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/vala' [ 71s] make[2]: Nothing to be done for 'install-exec-am'. [ 71s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/vala' [ 71s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/vala' [ 71s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4' [ 71s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4' [ 71s] make[2]: Nothing to be done for 'install-exec-am'. [ 71s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/lib/pkgconfig' [ 71s] /usr/bin/install -c -m 644 gssdp-1.0.pc '/home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/lib/pkgconfig' [ 71s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4' [ 71s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4' [ 71s] + rm -f /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/share/info/dir [ 71s] + find /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm -regex '.*\.la$' [ 71s] + xargs rm -f -- [ 71s] + find /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm -regex '.*\.a$' [ 71s] + xargs rm -f -- [ 71s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/share/gtk-doc [ 71s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/gssdp-0.14.4 [ 72s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/lib/libgssdp-1.0.so.3.0.0 [ 72s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 72s] cpio: glibc-2.20/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 72s] cpio: glibc-2.20/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 72s] 341 blocks [ 72s] + /usr/lib/rpm/check-buildroot [ 72s] + /usr/lib/rpm//brp-compress [ 72s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 72s] + /usr/lib/rpm/brp-python-hardlink [ 72s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm [ 72s] Processing files: gssdp-0.14.4-1.1.armv7l [ 72s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 72s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 72s] [ 72s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.cKGN0L [ 72s] + umask 022 [ 72s] + cd /home/abuild/rpmbuild/BUILD [ 72s] + cd gssdp-0.14.4 [ 72s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/share/licenses/gssdp [ 72s] + export LICENSEDIR [ 72s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/share/licenses/gssdp [ 72s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/share/licenses/gssdp [ 72s] + exit 0 [ 72s] Provides: gssdp = 0.14.4-1.1 gssdp(armv7l-32) = 0.14.4-1.1 libgssdp-1.0.so.3 [ 72s] Requires(interp): /bin/sh /bin/sh [ 72s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 72s] Requires(post): /bin/sh [ 72s] Requires(postun): /bin/sh [ 72s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libgio-2.0.so.0 libglib-2.0.so.0 libgobject-2.0.so.0 libgssdp-1.0.so.3 libpthread.so.0 libpthread.so.0(GLIBC_2.4) libsoup-2.4.so.1 rtld(GNU_HASH) [ 72s] Processing files: gssdp-debugsource-0.14.4-1.1.armv7l [ 72s] Provides: gssdp-debugsource = 0.14.4-1.1 gssdp-debugsource(armv7l-32) = 0.14.4-1.1 [ 72s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 72s] Processing files: gssdp-devel-0.14.4-1.1.armv7l [ 72s] Provides: gssdp-devel = 0.14.4-1.1 gssdp-devel(armv7l-32) = 0.14.4-1.1 pkgconfig(gssdp-1.0) = 0.14.4 [ 72s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 72s] Requires: /usr/bin/pkg-config libgssdp-1.0.so.3 pkgconfig(gio-2.0) pkgconfig(gobject-2.0) [ 72s] Processing files: gssdp-debuginfo-0.14.4-1.1.armv7l [ 72s] Provides: gssdp-debuginfo = 0.14.4-1.1 gssdp-debuginfo(armv7l-32) = 0.14.4-1.1 [ 72s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 72s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm [ 73s] warning: Could not canonicalize hostname: obspw02 [ 73s] Wrote: /home/abuild/rpmbuild/SRPMS/gssdp-0.14.4-1.1.src.rpm [ 73s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/gssdp-0.14.4-1.1.armv7l.rpm [ 73s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/gssdp-debugsource-0.14.4-1.1.armv7l.rpm [ 73s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/gssdp-devel-0.14.4-1.1.armv7l.rpm [ 73s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/gssdp-debuginfo-0.14.4-1.1.armv7l.rpm [ 73s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.X6wya1 [ 73s] + umask 022 [ 73s] + cd /home/abuild/rpmbuild/BUILD [ 73s] + cd gssdp-0.14.4 [ 73s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm [ 73s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm [ 73s] + exit 0 [ 73s] ... checking for files with abuild user/group [ 73s] ... creating baselibs [ 74s] [ 74s] obspw02 finished "build gssdp.spec" at Sat Apr 22 22:25:27 UTC 2017. [ 74s] Retried build at Fri May 26 12:57:43 2017 returned same result, skipped Retried build at Wed May 31 23:42:00 2017 returned same result, skipped Retried build at Fri Jun 2 00:19:25 2017 returned same result, skipped Retried build at Thu Jun 8 07:39:06 2017 returned same result, skipped Retried build at Fri Jun 9 09:50:22 2017 returned same result, skipped Retried build at Wed Jun 14 05:57:33 2017 returned same result, skipped Retried build at Wed Jun 14 23:05:14 2017 returned same result, skipped Retried build at Thu Jun 15 08:42:34 2017 returned same result, skipped Retried build at Mon Jun 19 08:25:46 2017 returned same result, skipped Retried build at Tue Jun 20 10:47:29 2017 returned same result, skipped Retried build at Fri Jun 30 08:37:28 2017 returned same result, skipped Retried build at Mon Jul 3 08:30:12 2017 returned same result, skipped Retried build at Wed Jul 5 23:31:49 2017 returned same result, skipped Retried build at Fri Jul 14 06:51:45 2017 returned same result, skipped Retried build at Thu Aug 3 01:28:27 2017 returned same result, skipped Retried build at Tue Aug 8 07:27:57 2017 returned same result, skipped Retried build at Sat Sep 9 04:49:07 2017 returned same result, skipped Retried build at Thu Oct 19 11:03:05 2017 returned same result, skipped Retried build at Wed Nov 8 03:44:34 2017 returned same result, skipped Retried build at Mon Jul 2 10:22:47 2018 returned same result, skipped Retried build at Fri Jul 13 17:54:52 2018 returned same result, skipped Retried build at Thu Sep 6 09:57:29 2018 returned same result, skipped Retried build at Fri May 17 02:44:23 2019 returned same result, skipped Retried build at Wed Aug 5 05:30:31 2020 returned same result, skipped