[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_5 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw16 started "build _service:gbs:powertop.spec" at Fri May 17 01:46:40 UTC 2019. [ 0s] [ 0s] Building powertop for project 'Tizen:3.0:TV' repository 'arm-wayland' arch 'armv7l' srcmd5 'e3ca3bf9f2dbc1489e9c913e507ba7d0' [ 0s] [ 0s] processing recipe /var/cache/build/root_5/.build-srcdir/_service:gbs:powertop.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_5/.build-srcdir/_service:gbs:powertop.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/5/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_5/.build.rpmlist /var/cache/build/root_5/.build-srcdir/_service:gbs:powertop.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/5/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling setup... [ 1s] [3/40] preinstalling filesystem... [ 1s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling libgcc... [ 1s] [6/40] preinstalling bash... [ 1s] [7/40] preinstalling diffutils... [ 1s] [8/40] preinstalling grep... [ 1s] [9/40] preinstalling libattr... [ 1s] [10/40] preinstalling libbz2... [ 1s] [11/40] preinstalling libcap... [ 1s] [12/40] preinstalling libelf... [ 1s] [13/40] preinstalling libfreebl3... [ 1s] [14/40] preinstalling liblua... [ 1s] [15/40] preinstalling liblzma... [ 1s] [16/40] preinstalling libncurses... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libsmack... [ 1s] [19/40] preinstalling libsqlite... [ 1s] [20/40] preinstalling libuuid... [ 1s] [21/40] preinstalling nspr... [ 1s] [22/40] preinstalling sed... [ 1s] [23/40] preinstalling zlib... [ 1s] [24/40] preinstalling qemu-accel-x86_64-armv7l... [ 4s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 5s] [26/40] preinstalling coreutils... [ 5s] [27/40] preinstalling libacl... [ 5s] [28/40] preinstalling libblkid... [ 5s] [29/40] preinstalling libreadline... [ 5s] [30/40] preinstalling smack... [ 5s] [31/40] preinstalling bzip2... [ 5s] [32/40] preinstalling libmagic... [ 5s] [33/40] preinstalling libxml2... [ 5s] [34/40] preinstalling tar... [ 5s] [35/40] preinstalling libmount... [ 5s] [36/40] preinstalling util-linux... [ 5s] [37/40] preinstalling util-linux-su... [ 5s] [38/40] preinstalling nss... [ 6s] [39/40] preinstalling libsoftokn3... [ 6s] [40/40] preinstalling rpm... [ 6s] [ 6s] running qemu-linux-user-x86_64-cross postinstall script [ 6s] running qemu-accel-x86_64-armv7l postinstall script [ 6s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/liblto_plugin.so': No such file or directory [ 6s] running setup postinstall script [ 6s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 6s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 6s] initializing rpm db... [ 6s] reordering...cycle: libsoftokn3 -> nss [ 6s] breaking dependency nss -> libsoftokn3 [ 6s] done [ 6s] [1/96] installing libmagic-data-5.28-2.20 [ 6s] [2/96] installing setup-0.9-2.6 [ 6s] [3/96] installing terminfo-base-5.9-1.39 [ 6s] [4/96] installing filesystem-3.1-1.2 [ 6s] [5/96] installing glibc-2.20-3.2 [ 7s] [6/96] installing libatomic-4.9.2-1.18 [ 7s] [7/96] installing libgcc-4.9.2-1.18 [ 7s] [8/96] installing libgomp-4.9.2-1.18 [ 8s] [9/96] installing bash-3.2.57-2.1 [ 8s] [10/96] installing cpio-2.11-1.3 [ 8s] [11/96] installing diffutils-3.3-1.3 [ 8s] [12/96] installing findutils-4.3.8-1.40 [ 8s] [13/96] installing hostname-3.12-1.3 [ 8s] [14/96] installing libattr-2.4.47-1.39 [ 8s] [15/96] installing libbz2-1.0.6-1.61 [ 8s] [16/96] installing libcap-2.24-1.39 [ 9s] [17/96] installing libelf-0.153-1.39 [ 9s] [18/96] installing libext2fs-1.42.13-1.3 [ 9s] [19/96] installing libfreebl3-3.23-1.54 [ 10s] [20/96] installing libitm-4.9.2-1.18 [ 10s] [21/96] installing libltdl-2.4.2-1.43 [ 10s] [22/96] installing liblua-5.1.5-2.1 [ 10s] [23/96] installing liblzma-5.2.2-1.33 [ 11s] [24/96] installing libnl2-2.0-1.1 [ 11s] [25/96] installing libpcre-8.39-2.2 [ 11s] [26/96] installing libpopt-1.16-1.15 [ 12s] [27/96] installing libsmack-1.3.0-2.18 [ 12s] [28/96] installing libsmartcols-2.28-2.1 [ 12s] [29/96] installing libsqlite-3.8.10.2-2.5 [ 12s] [30/96] installing libstdc++-4.9.2-1.18 [ 13s] [31/96] installing libuuid-2.28-2.1 [ 13s] [32/96] installing m4-1.4.17-1.3 [ 13s] [33/96] installing net-tools-2.0_20121208git-1.3 [ 13s] [34/96] installing nspr-4.12-1.20 [ 13s] [35/96] installing patch-2.7-1.15 [ 13s] [36/96] installing pkg-config-0.28-1.42 [ 13s] [37/96] installing sed-4.1c-1.3 [ 13s] [38/96] installing update-alternatives-1.16.3-1.3 [ 13s] [39/96] installing which-2.20-1.3 [ 14s] [40/96] installing zlib-1.2.8-1.43 [ 14s] [41/96] installing libncurses-5.9-1.39 [ 14s] [42/96] installing libncurses6-5.9-1.39 [ 14s] [43/96] installing build-compare-2015.04.28-1.34 [ 14s] [44/96] installing libstdc++-devel-4.9.2-1.18 [ 15s] [45/96] installing qemu-linux-user-x86_64-cross-2.7.0-1.5.1 [ 16s] [46/96] installing cpp-4.9.2-1.18 [ 16s] [47/96] installing gcc-c++-4.9.2-1.18 [ 17s] [48/96] installing libnl2-devel-2.0-1.1 [ 17s] [49/96] installing binutils-2.25-1.11 [ 17s] [50/96] installing coreutils-6.9-1.3 [ 17s] [51/96] installing db4-4.8.30.NC-1.46 [ 18s] [52/96] installing gawk-3.1.5-1.3 [ 18s] [53/96] installing grep-2.5.2-1.3 [ 18s] [54/96] installing less-466-1.3 [ 18s] [55/96] installing libacl-2.2.52-1.40 [ 18s] [56/96] installing libasm-0.153-1.39 [ 18s] [57/96] installing libblkid-2.28-2.1 [ 18s] [58/96] installing libreadline-5.2-1.38 [ 19s] [59/96] installing libubsan-4.9.2-1.18 [ 19s] [60/96] installing make-4.0-1.15 [ 19s] [61/96] installing nss-certs-3.23-1.54 [ 19s] [62/96] installing smack-1.3.0-2.18 [ 19s] [63/96] installing bzip2-1.0.6-1.61 [ 19s] [64/96] installing gettext-runtime-0.19.7-1.23 [ 20s] [65/96] installing libmagic-5.28-2.20 [ 20s] [66/96] installing libxml2-2.9.4-2.35 [ 20s] [67/96] installing xz-5.2.2-1.33 [ 20s] [68/96] installing libdw-0.153-1.39 [ 21s] [69/96] installing ncurses-devel-5.9-1.39 [ 21s] [70/96] installing linux-glibc-devel-3.10-1.44 [ 21s] [71/96] installing file-5.28-2.20 [ 21s] [72/96] installing glibc-locale-2.20-3.2 [ 22s] [73/96] installing tar-1.17-1.3 [ 22s] [74/96] installing gettext-tools-0.19.7-1.23 [ 22s] [75/96] installing gzip-1.3.12-1.39 [ 22s] [76/96] installing libfdisk1-2.28-2.1 [ 23s] [77/96] installing libmount-2.28-2.1 [ 23s] [78/96] installing pam-1.1.6-1.2 [ 23s] [79/96] installing perl-5.20.0-1.43 [ 25s] [80/96] installing tzdata-2016i-2.3 [ 25s] [81/96] installing elfutils-0.153-1.39 [ 25s] [82/96] installing gcc-4.9.2-1.18 [ 26s] [83/96] installing build-mkbaselibs-20120927-1.3 [ 26s] [84/96] installing glibc-devel-2.20-3.2 [ 26s] [85/96] installing qemu-accel-x86_64-armv7l-0.4-1.12 [ 30s] [86/96] installing autoconf-2.69-1.46 [ 30s] [87/96] installing util-linux-2.28-2.1 [ 30s] [88/96] installing zlib-devel-1.2.8-1.43 [ 30s] [89/96] installing automake-1.14.1-1.41 [ 31s] [90/96] installing util-linux-su-2.28-2.1 [ 31s] [91/96] installing build-20120927-1.3 [ 31s] [92/96] installing libtool-2.4.2-1.43 [ 31s] [93/96] installing nss-3.23-1.54 [ 31s] [94/96] installing libsoftokn3-3.23-1.54 [ 31s] [95/96] installing rpm-4.11.0.1-2.15 [ 32s] [96/96] installing rpm-build-4.11.0.1-2.15 [ 32s] removing nis flags from /var/cache/build/root_5/etc/nsswitch.conf... [ 32s] now finalizing build dir... [ 32s] Running build time source services... [ 33s] build target is armv7l-tizen-linux [ 33s] ----------------------------------------------------------------- [ 33s] I have the following modifications for powertop.spec: [ 33s] 4c4 [ 33s] < Release: 1 [ 33s] --- [ 33s] > Release: 1.8 [ 33s] 11c11 [ 33s] < BuildRequires: gettext [ 33s] --- [ 33s] > BuildRequires: gettext-tools [ 33s] 46a47 [ 33s] > %changelog [ 33s] ----------------------------------------------------------------- [ 33s] ----- building powertop.spec (user abuild) [ 33s] ----------------------------------------------------------------- [ 33s] ----------------------------------------------------------------- [ 33s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0:TV/arm-wayland/e3ca3bf9f2dbc1489e9c913e507ba7d0-powertop' -ba /home/abuild/rpmbuild/SOURCES/powertop.spec [ 33s] Building target platforms: armv7l-tizen-linux [ 33s] Building for target armv7l-tizen-linux [ 33s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.jev8ka [ 33s] + umask 022 [ 33s] + cd /home/abuild/rpmbuild/BUILD [ 33s] + cd /home/abuild/rpmbuild/BUILD [ 33s] + rm -rf powertop-2.5 [ 33s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/powertop-2.5.tar.gz [ 33s] + /bin/tar -xf - [ 33s] + STATUS=0 [ 33s] + '[' 0 -ne 0 ']' [ 33s] + cd powertop-2.5 [ 33s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 33s] + cp /home/abuild/rpmbuild/SOURCES/powertop.manifest . [ 33s] + exit 0 [ 33s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.seeieU [ 33s] + umask 022 [ 33s] + cd /home/abuild/rpmbuild/BUILD [ 33s] + cd powertop-2.5 [ 33s] ++ uname -m [ 33s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 33s] + LANG=C [ 33s] + export LANG [ 33s] + unset DISPLAY [ 33s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 33s] + export CFLAGS [ 33s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 33s] + export CXXFLAGS [ 33s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 33s] + export FFLAGS [ 33s] + LDFLAGS= [ 33s] + export LDFLAGS [ 33s] + LD_AS_NEEDED=1 [ 33s] + export LD_AS_NEEDED [ 33s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 33s] + export CFLAGS [ 33s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 33s] + export CXXFLAGS [ 33s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 33s] + export FFLAGS [ 33s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --disable-static [ 33s] checking for a BSD-compatible install... /bin/install -c [ 33s] checking whether build environment is sane... yes [ 33s] /home/abuild/rpmbuild/BUILD/powertop-2.5/missing: Unknown `--is-lightweight' option [ 33s] Try `/home/abuild/rpmbuild/BUILD/powertop-2.5/missing --help' for more information [ 33s] configure: WARNING: 'missing' script is too old or missing [ 33s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 33s] checking for gawk... gawk [ 33s] checking whether make sets $(MAKE)... yes [ 33s] checking whether make supports nested variables... yes [ 33s] checking whether make supports nested variables... (cached) yes [ 33s] checking whether NLS is requested... yes [ 33s] checking for msgfmt... /bin/msgfmt [ 33s] checking for gmsgfmt... /bin/msgfmt [ 33s] checking for xgettext... /bin/xgettext [ 33s] checking for msgmerge... /bin/msgmerge [ 33s] checking for style of include used by make... GNU [ 33s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 33s] checking whether the C compiler works... yes [ 33s] checking for C compiler default output file name... a.out [ 33s] checking for suffix of executables... [ 33s] checking whether we are cross compiling... no [ 34s] checking for suffix of object files... o [ 34s] checking whether we are using the GNU C compiler... yes [ 34s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 34s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 34s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 34s] checking build system type... armv7l-tizen-linux-gnueabi [ 34s] checking host system type... armv7l-tizen-linux-gnueabi [ 34s] checking for ld used by GCC... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 34s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 34s] checking for shared library run path origin... done [ 34s] checking for armv7l-tizen-linux-gnueabi-g++... armv7l-tizen-linux-gnueabi-g++ [ 34s] checking whether we are using the GNU C++ compiler... yes [ 34s] checking whether armv7l-tizen-linux-gnueabi-g++ accepts -g... yes [ 34s] checking dependency style of armv7l-tizen-linux-gnueabi-g++... gcc3 [ 34s] checking how to run the C++ preprocessor... armv7l-tizen-linux-gnueabi-g++ -E [ 34s] checking for grep that handles long lines and -e... /bin/grep [ 34s] checking for egrep... /bin/grep -E [ 34s] checking for CFPreferencesCopyAppValue... no [ 34s] checking for CFLocaleCopyCurrent... no [ 34s] checking for GNU gettext in libc... yes [ 34s] checking whether to use NLS... yes [ 34s] checking where the gettext function comes from... libc [ 34s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 34s] checking for armv7l-tizen-linux-gnueabi-lib... no [ 34s] checking for armv7l-tizen-linux-gnueabi-link... no [ 34s] checking for ar... ar [ 34s] checking the archiver (ar) interface... ar [ 34s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 34s] checking whether we are using the GNU C++ compiler... (cached) yes [ 34s] checking whether armv7l-tizen-linux-gnueabi-g++ accepts -g... (cached) yes [ 34s] checking dependency style of armv7l-tizen-linux-gnueabi-g++... (cached) gcc3 [ 34s] checking how to print strings... printf [ 34s] checking for a sed that does not truncate output... /bin/sed [ 34s] checking for fgrep... /bin/grep -F [ 34s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 34s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 34s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 34s] checking the name lister (/bin/nm -B) interface... BSD nm [ 34s] checking whether ln -s works... yes [ 34s] checking the maximum length of command line arguments... 1572864 [ 34s] checking whether the shell understands some XSI constructs... yes [ 34s] checking whether the shell understands "+="... yes [ 34s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 34s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 34s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 34s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 34s] checking for objdump... objdump [ 34s] checking how to recognize dependent libraries... pass_all [ 34s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 34s] checking for dlltool... no [ 34s] checking how to associate runtime and link libraries... printf %s\n [ 34s] checking for armv7l-tizen-linux-gnueabi-ar... ar [ 34s] checking for archiver @FILE support... @ [ 34s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 34s] checking for strip... strip [ 34s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 34s] checking for ranlib... ranlib [ 34s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 34s] checking for sysroot... no [ 34s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 34s] checking for mt... no [ 34s] checking if : is a manifest tool... no [ 34s] checking for ANSI C header files... yes [ 34s] checking for sys/types.h... yes [ 34s] checking for sys/stat.h... yes [ 34s] checking for stdlib.h... yes [ 35s] checking for string.h... yes [ 35s] checking for memory.h... yes [ 35s] checking for strings.h... yes [ 35s] checking for inttypes.h... yes [ 35s] checking for stdint.h... yes [ 35s] checking for unistd.h... yes [ 35s] checking for dlfcn.h... yes [ 35s] checking for objdir... .libs [ 35s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 35s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 35s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 35s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 35s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 35s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 35s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 35s] checking whether -lc should be explicitly linked in... no [ 35s] checking dynamic linker characteristics... GNU/Linux ld.so [ 35s] checking how to hardcode library paths into programs... immediate [ 35s] checking whether stripping libraries is possible... yes [ 35s] checking if libtool supports shared libraries... yes [ 35s] checking whether to build shared libraries... yes [ 35s] checking whether to build static libraries... no [ 35s] checking how to run the C++ preprocessor... armv7l-tizen-linux-gnueabi-g++ -E [ 35s] checking for ld used by armv7l-tizen-linux-gnueabi-g++... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 35s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 35s] checking whether the armv7l-tizen-linux-gnueabi-g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 35s] checking for armv7l-tizen-linux-gnueabi-g++ option to produce PIC... -fPIC -DPIC [ 35s] checking if armv7l-tizen-linux-gnueabi-g++ PIC flag -fPIC -DPIC works... yes [ 35s] checking if armv7l-tizen-linux-gnueabi-g++ static flag -static works... no [ 35s] checking if armv7l-tizen-linux-gnueabi-g++ supports -c -o file.o... yes [ 35s] checking if armv7l-tizen-linux-gnueabi-g++ supports -c -o file.o... (cached) yes [ 35s] checking whether the armv7l-tizen-linux-gnueabi-g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 35s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 35s] checking how to hardcode library paths into programs... immediate [ 35s] checking for armv7l-tizen-linux-gnueabi-gcc... (cached) armv7l-tizen-linux-gnueabi-gcc [ 35s] checking whether we are using the GNU C compiler... (cached) yes [ 35s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... (cached) yes [ 35s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... (cached) none needed [ 35s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... (cached) gcc3 [ 35s] checking whether armv7l-tizen-linux-gnueabi-gcc and cc understand -c and -o together... yes [ 36s] checking fcntl.h usability... yes [ 36s] checking fcntl.h presence... yes [ 36s] checking for fcntl.h... yes [ 36s] checking libintl.h usability... yes [ 36s] checking libintl.h presence... yes [ 36s] checking for libintl.h... yes [ 36s] checking limits.h usability... yes [ 36s] checking limits.h presence... yes [ 36s] checking for limits.h... yes [ 36s] checking locale.h usability... yes [ 36s] checking locale.h presence... yes [ 36s] checking for locale.h... yes [ 36s] checking malloc.h usability... yes [ 36s] checking malloc.h presence... yes [ 36s] checking for malloc.h... yes [ 36s] checking for stdint.h... (cached) yes [ 36s] checking for stdlib.h... (cached) yes [ 36s] checking for string.h... (cached) yes [ 36s] checking sys/ioctl.h usability... yes [ 36s] checking sys/ioctl.h presence... yes [ 36s] checking for sys/ioctl.h... yes [ 36s] checking sys/socket.h usability... yes [ 36s] checking sys/socket.h presence... yes [ 36s] checking for sys/socket.h... yes [ 36s] checking sys/statfs.h usability... yes [ 36s] checking sys/statfs.h presence... yes [ 36s] checking for sys/statfs.h... yes [ 36s] checking sys/time.h usability... yes [ 36s] checking sys/time.h presence... yes [ 36s] checking for sys/time.h... yes [ 36s] checking termios.h usability... yes [ 36s] checking termios.h presence... yes [ 36s] checking for termios.h... yes [ 36s] checking for unistd.h... (cached) yes [ 36s] checking ncurses.h usability... yes [ 36s] checking ncurses.h presence... yes [ 36s] checking for ncurses.h... yes [ 36s] checking for stdbool.h that conforms to C99... yes [ 36s] checking for _Bool... no [ 36s] checking for inline... inline [ 36s] checking for int64_t... yes [ 36s] checking for pid_t... yes [ 37s] checking for size_t... yes [ 37s] checking for ssize_t... yes [ 37s] checking for uint16_t... yes [ 37s] checking for uint32_t... yes [ 37s] checking for uint64_t... yes [ 37s] checking for stdlib.h... (cached) yes [ 37s] checking for GNU libc compatible malloc... yes [ 37s] checking for stdlib.h... (cached) yes [ 37s] checking for unistd.h... (cached) yes [ 37s] checking for sys/param.h... yes [ 37s] checking for getpagesize... yes [ 37s] checking for working mmap... yes [ 37s] checking for stdlib.h... (cached) yes [ 37s] checking for GNU libc compatible realloc... yes [ 37s] checking for working strtod... yes [ 37s] checking for fdatasync... yes [ 37s] checking for getpagesize... (cached) yes [ 37s] checking for gettimeofday... yes [ 37s] checking for memmove... yes [ 37s] checking for memset... yes [ 37s] checking for mkdir... yes [ 38s] checking for munmap... yes [ 38s] checking for pow... yes [ 38s] checking for realpath... yes [ 38s] checking for regcomp... yes [ 38s] checking for select... yes [ 38s] checking for setlocale... yes [ 38s] checking for socket... yes [ 38s] checking for sqrt... yes [ 38s] checking for strcasecmp... yes [ 38s] checking for strchr... yes [ 38s] checking for strdup... yes [ 38s] checking for strerror... yes [ 38s] checking for strncasecmp... yes [ 38s] checking for strstr... yes [ 38s] checking for strtoul... yes [ 38s] checking for strtoull... yes [ 38s] checking for library containing delwin... -lncursesw [ 38s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /bin/armv7l-tizen-linux-gnueabi-pkg-config [ 38s] checking pkg-config is at least version 0.9.0... yes [ 38s] checking for PCIUTILS... no [ 39s] checking for library containing pci_get_dev... no [ 39s] checking for LIBNL... no [ 39s] checking for LIBNL... yes [ 39s] configure: WARNING: [ 39s] ************* LIBPCI SUPPORT NOT CONFIGURED************** [ 39s] If you need or want pci support, please install libpci [ 39s] and re-configure PowerTOP. [ 39s] ********************************************************* [ 39s] [ 39s] checking for library containing pthread_create... -lpthread [ 39s] checking for library containing inet_aton... none required [ 39s] checking that generated files are newer than configure... done [ 39s] configure: creating ./config.status [ 40s] config.status: creating Makefile [ 40s] config.status: creating src/Makefile [ 40s] config.status: creating traceevent/Makefile [ 40s] config.status: creating po/Makefile.in [ 40s] config.status: creating doc/Makefile [ 40s] config.status: creating config.h [ 40s] config.status: executing po-directories commands [ 40s] config.status: creating po/POTFILES [ 40s] config.status: creating po/Makefile [ 40s] config.status: executing depfiles commands [ 41s] config.status: executing libtool commands [ 41s] + make -j4 [ 41s] make all-recursive [ 41s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 41s] Making all in traceevent [ 41s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/traceevent' [ 41s] CC event-parse.lo [ 41s] CC parse-filter.lo [ 41s] CC parse-utils.lo [ 41s] CC trace-seq.lo [ 41s] event-parse.c: In function '__read_token': [ 41s] event-parse.c:854:3: warning: implicit declaration of function 'asprintf' [-Wimplicit-function-declaration] [ 41s] if (asprintf(tok, "%c", ch) < 0) [ 41s] ^ [ 41s] event-parse.c: In function 'pevent_strerror': [ 41s] event-parse.c:5118:7: warning: assignment makes pointer from integer without a cast [ 41s] msg = strerror_r(errnum, buf, buflen); [ 41s] ^ [ 41s] parse-filter.c: In function 'arg_to_str': [ 41s] parse-filter.c:2034:8: warning: 'op' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 41s] char *op; [ 41s] ^ [ 41s] parse-filter.c: In function 'reparent_op_arg': [ 41s] parse-filter.c:752:7: warning: 'ptr' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 41s] *ptr = NULL; [ 41s] ^ [ 41s] parse-filter.c:756:3: warning: 'other_child' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 41s] free_arg(other_child); [ 41s] ^ [ 42s] event-parse.c: In function 'pevent_find_event_by_name': [ 42s] event-parse.c:3225:21: warning: 'event' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 42s] pevent->last_event = event; [ 42s] ^ [ 42s] event-parse.c: In function 'pevent_data_lat_fmt': [ 42s] event-parse.c:4352:4: warning: 'migrate_disable' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 42s] trace_seq_printf(s, "%d", migrate_disable); [ 42s] ^ [ 42s] event-parse.c:4359:4: warning: 'lock_depth' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 42s] trace_seq_printf(s, "%d", lock_depth); [ 42s] ^ [ 42s] event-parse.c: In function 'pevent_event_info': [ 42s] event-parse.c:4259:5: warning: 'len_arg' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 42s] print_str_arg(s, data, size, event, [ 42s] ^ [ 42s] event-parse.c:4056:6: note: 'len_arg' was declared here [ 42s] int len_arg; [ 42s] ^ [ 42s] CCLD libtraceevnet.la [ 42s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/traceevent' [ 42s] Making all in src [ 42s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 42s] make all-am [ 42s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 42s] CXX powertop-display.o [ 42s] CXX powertop-devlist.o [ 42s] CXX powertop-lib.o [ 42s] CXX report/powertop-report-maker.o [ 43s] CXX report/powertop-report-formatter-base.o [ 43s] In file included from /usr/include/stdio.h:27:0, [ 43s] from report/report-formatter-base.cpp:31: [ 43s] /usr/include/features.h:148:3: warning: #warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [-Wcpp] [ 43s] # warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [ 43s] ^ [ 43s] CXX report/powertop-report-formatter-csv.o [ 43s] In file included from /usr/include/stdio.h:27:0, [ 43s] from report/report-formatter-csv.cpp:31: [ 43s] /usr/include/features.h:148:3: warning: #warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [-Wcpp] [ 43s] # warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [ 43s] ^ [ 43s] CXX report/powertop-report-formatter-html.o [ 43s] In file included from /usr/include/stdio.h:27:0, [ 43s] from report/report-formatter-html.cpp:31: [ 43s] /usr/include/features.h:148:3: warning: #warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [-Wcpp] [ 43s] # warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [ 43s] ^ [ 43s] CXX powertop-main.o [ 43s] CXX cpu/powertop-intel_gpu.o [ 43s] CXX cpu/powertop-cpu_rapl_device.o [ 43s] CXX cpu/powertop-dram_rapl_device.o [ 43s] CXX devices/powertop-gpu_rapl_device.o [ 43s] CXX parameters/powertop-persistent.o [ 43s] CXX parameters/powertop-learn.o [ 43s] CXX parameters/powertop-parameters.o [ 43s] CXX cpu/powertop-cpu_core.o [ 44s] CXX cpu/powertop-cpudevice.o [ 44s] CXX cpu/powertop-cpu.o [ 44s] CXX cpu/powertop-cpu_linux.o [ 44s] CXX cpu/powertop-abstract_cpu.o [ 44s] CXX cpu/powertop-cpu_package.o [ 44s] CXX cpu/powertop-intel_cpus.o [ 44s] CXX report/powertop-report.o [ 44s] CXX process/powertop-process.o [ 45s] CXX process/powertop-processdevice.o [ 45s] CXX process/powertop-powerconsumer.o [ 45s] CXX process/powertop-timer.o [ 45s] CXX process/powertop-work.o [ 45s] CXX process/powertop-do_process.o [ 45s] CXX process/powertop-interrupt.o [ 45s] CXX perf/powertop-perf.o [ 45s] CXX perf/powertop-perf_bundle.o [ 45s] CXX devices/powertop-i915-gpu.o [ 45s] CXX devices/powertop-device.o [ 46s] CXX devices/powertop-alsa.o [ 46s] CXX devices/powertop-runtime_pm.o [ 46s] CXX devices/powertop-thinkpad-fan.o [ 46s] CXX devices/powertop-usb.o [ 46s] CXX devices/powertop-ahci.o [ 46s] CXX devices/powertop-thinkpad-light.o [ 46s] CXX devices/powertop-rfkill.o [ 46s] CXX devices/powertop-backlight.o [ 47s] CXX devices/powertop-network.o [ 47s] CXX tuning/powertop-bluetooth.o [ 47s] CXX tuning/powertop-cpufreq.o [ 47s] CXX tuning/powertop-tuning.o [ 47s] tuning/bluetooth.cpp: In member function 'virtual void bt_tunable::toggle()': [ 47s] tuning/bluetooth.cpp:179:55: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 47s] system("/usr/sbin/hciconfig hci0 up &> /dev/null &"); [ 47s] ^ [ 47s] tuning/bluetooth.cpp:182:54: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 47s] system("/usr/sbin/hciconfig hci0 down &> /dev/null"); [ 47s] ^ [ 47s] tuning/cpufreq.cpp: In member function 'virtual void cpufreq_tunable::toggle()': [ 47s] tuning/cpufreq.cpp:119:60: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 47s] system("/sbin/modprobe cpufreq_ondemand > /dev/null 2>&1"); [ 47s] ^ [ 47s] CXX tuning/powertop-tuningusb.o [ 47s] CXX tuning/powertop-ethernet.o [ 47s] CXX tuning/powertop-tunable.o [ 47s] CC tuning/powertop-iw.o [ 47s] CXX tuning/powertop-wifi.o [ 47s] CXX tuning/powertop-tuningsysfs.o [ 47s] CXX tuning/powertop-runtime.o [ 47s] CXX calibrate/powertop-calibrate.o [ 47s] CXX measurement/powertop-measurement.o [ 47s] calibrate/calibrate.cpp: In function 'void idle_calibration()': [ 47s] calibrate/calibrate.cpp:361:51: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 47s] system("DISPLAY=:0 /usr/bin/xset dpms force off"); [ 47s] ^ [ 47s] calibrate/calibrate.cpp:363:50: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 47s] system("DISPLAY=:0 /usr/bin/xset dpms force on"); [ 47s] ^ [ 47s] calibrate/calibrate.cpp: In function 'void* burn_disk(void*)': [ 47s] calibrate/calibrate.cpp:242:29: warning: ignoring return value of 'ssize_t write(int, const void*, size_t)', declared with attribute warn_unused_result [-Wunused-result] [ 47s] write(fd, buffer, 64*1024); [ 47s] ^ [ 47s] calibrate/calibrate.cpp: In function 'void backlight_calibration()': [ 47s] calibrate/calibrate.cpp:353:51: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 47s] system("DISPLAY=:0 /usr/bin/xset dpms force off"); [ 47s] ^ [ 47s] calibrate/calibrate.cpp:355:50: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 47s] system("DISPLAY=:0 /usr/bin/xset dpms force on"); [ 47s] ^ [ 48s] CXX measurement/powertop-acpi.o [ 48s] CXX measurement/powertop-sysfs.o [ 48s] CXX measurement/powertop-extech.o [ 48s] CXX cpu/rapl/powertop-rapl_interface.o [ 48s] measurement/extech.cpp: In member function 'void extech_power_meter::measure()': [ 48s] measurement/extech.cpp:290:19: warning: ignoring return value of 'ssize_t write(int, const void*, size_t)', declared with attribute warn_unused_result [-Wunused-result] [ 48s] write(fd, " ", 1); [ 48s] ^ [ 48s] CXXLD powertop [ 48s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 48s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 48s] Making all in po [ 48s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/po' [ 48s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/po' [ 48s] Making all in doc [ 48s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/doc' [ 48s] make[2]: Nothing to be done for 'all'. [ 48s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/doc' [ 48s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 48s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 48s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 48s] + exit 0 [ 48s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.Uz9j6q [ 48s] + umask 022 [ 48s] + cd /home/abuild/rpmbuild/BUILD [ 48s] + cd powertop-2.5 [ 48s] + LANG=C [ 48s] + export LANG [ 48s] + unset DISPLAY [ 48s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.8.arm [ 48s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.8.arm [ 48s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.8.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.8.arm install [ 48s] Making install in traceevent [ 48s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/traceevent' [ 48s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/traceevent' [ 48s] make[2]: Nothing to be done for 'install-exec-am'. [ 48s] make[2]: Nothing to be done for 'install-data-am'. [ 48s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/traceevent' [ 48s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/traceevent' [ 48s] Making install in src [ 48s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 48s] /bin/make install-am [ 48s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 48s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 48s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.8.arm/usr/sbin' [ 48s] /bin/sh ../libtool --mode=install /bin/install -c powertop '/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.8.arm/usr/sbin' [ 48s] libtool: install: /bin/install -c powertop /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.8.arm/usr/sbin/powertop [ 48s] make[3]: Nothing to be done for 'install-data-am'. [ 48s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 48s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 48s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 48s] Making install in po [ 48s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/po' [ 49s] installing ca.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.8.arm/usr/share/locale/ca/LC_MESSAGES/powertop.mo [ 49s] installing cs_CZ.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.8.arm/usr/share/locale/cs_CZ/LC_MESSAGES/powertop.mo [ 49s] installing de_DE.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.8.arm/usr/share/locale/de_DE/LC_MESSAGES/powertop.mo [ 49s] installing en_GB.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.8.arm/usr/share/locale/en_GB/LC_MESSAGES/powertop.mo [ 49s] installing en_US.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.8.arm/usr/share/locale/en_US/LC_MESSAGES/powertop.mo [ 49s] installing es_ES.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.8.arm/usr/share/locale/es_ES/LC_MESSAGES/powertop.mo [ 49s] installing hu_HU.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.8.arm/usr/share/locale/hu_HU/LC_MESSAGES/powertop.mo [ 49s] installing id_ID.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.8.arm/usr/share/locale/id_ID/LC_MESSAGES/powertop.mo [ 49s] installing nl_NL.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.8.arm/usr/share/locale/nl_NL/LC_MESSAGES/powertop.mo [ 49s] installing zh_TW.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.8.arm/usr/share/locale/zh_TW/LC_MESSAGES/powertop.mo [ 49s] if test "powertop" = "gettext-tools"; then \ [ 49s] /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.8.arm/usr/share/gettext/po; \ [ 49s] for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ [ 49s] /bin/install -c -m 644 ./$file \ [ 49s] /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.8.arm/usr/share/gettext/po/$file; \ [ 49s] done; \ [ 49s] for file in Makevars; do \ [ 49s] rm -f /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.8.arm/usr/share/gettext/po/$file; \ [ 49s] done; \ [ 49s] else \ [ 49s] : ; \ [ 49s] fi [ 49s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/po' [ 49s] Making install in doc [ 49s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/doc' [ 49s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/doc' [ 49s] make[2]: Nothing to be done for 'install-exec-am'. [ 49s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.8.arm/usr/share/man/man8' [ 49s] /bin/install -c -m 644 powertop.8 '/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.8.arm/usr/share/man/man8' [ 49s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/doc' [ 49s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/doc' [ 49s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 49s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 49s] make[2]: Nothing to be done for 'install-exec-am'. [ 49s] make[2]: Nothing to be done for 'install-data-am'. [ 49s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 49s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 49s] + rm -f /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.8.arm/usr/share/info/dir [ 49s] + find /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.8.arm -regex '.*\.la$' [ 49s] + xargs rm -f -- [ 49s] + find /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.8.arm -regex '.*\.a$' [ 49s] + xargs rm -f -- [ 49s] + /usr/lib/rpm/find-lang.sh /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.8.arm powertop [ 49s] removing translation /usr/share/locale/hu_HU/LC_MESSAGES/powertop.mo: 118 translated messages. [ 49s] removing translation /usr/share/locale/id_ID/LC_MESSAGES/powertop.mo: 125 translated messages. [ 49s] removing translation /usr/share/locale/nl_NL/LC_MESSAGES/powertop.mo: 24 translated messages. [ 49s] find: `/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.8.arm/usr/share/help/': No such file or directory [ 49s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/powertop-2.5 [ 49s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.8.arm/usr/sbin/powertop [ 50s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 50s] cpio: glibc-2.20/csu/init.c: Cannot stat: No such file or directory [ 50s] cpio: glibc-2.20/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 50s] cpio: glibc-2.20/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 50s] cpio: glibc-2.20/sysdeps/arm/start.S: Cannot stat: No such file or directory [ 50s] 1393 blocks [ 50s] + /usr/lib/rpm/check-buildroot [ 50s] + /usr/lib/rpm//brp-compress [ 50s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 50s] + /usr/lib/rpm/brp-python-hardlink [ 50s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.8.arm [ 50s] Processing files: powertop-2.5-1.8.armv7l [ 50s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 50s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 50s] [ 50s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.A8wVd3 [ 50s] + umask 022 [ 50s] + cd /home/abuild/rpmbuild/BUILD [ 50s] + cd powertop-2.5 [ 50s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.8.arm/usr/share/licenses/powertop [ 50s] + export LICENSEDIR [ 50s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.8.arm/usr/share/licenses/powertop [ 50s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.8.arm/usr/share/licenses/powertop [ 50s] + exit 0 [ 50s] Provides: powertop = 2.5-1.8 powertop(armv7l-32) = 2.5-1.8 [ 50s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 50s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.15) libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libm.so.6 libm.so.6(GLIBC_2.4) libncursesw.so.5 libnl-genl.so.2 libnl.so.2 libpthread.so.0 libpthread.so.0(GLIBC_2.4) libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(CXXABI_ARM_1.3.3) libstdc++.so.6(GLIBCXX_3.4) libstdc++.so.6(GLIBCXX_3.4.11) libstdc++.so.6(GLIBCXX_3.4.9) libtinfo.so.5 rtld(GNU_HASH) [ 50s] Processing files: powertop-debugsource-2.5-1.8.armv7l [ 50s] Provides: powertop-debugsource = 2.5-1.8 powertop-debugsource(armv7l-32) = 2.5-1.8 [ 50s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 50s] Processing files: powertop-docs-2.5-1.8.armv7l [ 50s] Provides: powertop-docs = 2.5-1.8 powertop-docs(armv7l-32) = 2.5-1.8 [ 50s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 50s] Processing files: powertop-locale-2.5-1.8.noarch [ 50s] Provides: powertop-lang-all = 2.5 powertop-locale = 2.5-1.8 [ 50s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 50s] Processing files: powertop-debuginfo-2.5-1.8.armv7l [ 50s] Provides: powertop-debuginfo = 2.5-1.8 powertop-debuginfo(armv7l-32) = 2.5-1.8 [ 50s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 50s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.8.arm [ 50s] warning: Could not canonicalize hostname: obsnw16 [ 50s] Wrote: /home/abuild/rpmbuild/SRPMS/powertop-2.5-1.8.src.rpm [ 50s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/powertop-2.5-1.8.armv7l.rpm [ 50s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/powertop-debugsource-2.5-1.8.armv7l.rpm [ 50s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/powertop-docs-2.5-1.8.armv7l.rpm [ 50s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/powertop-locale-2.5-1.8.noarch.rpm [ 52s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/powertop-debuginfo-2.5-1.8.armv7l.rpm [ 52s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.ntnWCx [ 52s] + umask 022 [ 52s] + cd /home/abuild/rpmbuild/BUILD [ 52s] + cd powertop-2.5 [ 52s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.8.arm [ 52s] + exit 0 [ 52s] ... checking for files with abuild user/group [ 52s] ... creating baselibs [ 52s] ... comparing built packages with the former built [ 52s] /usr/lib/build/pkg-diff.sh [ 52s] compare /.build.oldpackages/powertop-2.5-1.7.src.rpm /home/abuild/rpmbuild/SRPMS/powertop-2.5-1.8.src.rpm [ 52s] This is not a prerelease project. Compare the project name. [ 52s] comparing rpmtags [ 53s] comparing RELEASE [ 53s] comparing PROVIDES [ 53s] comparing scripts [ 53s] comparing filelist [ 53s] comparing file checksum [ 53s] RPM meta information is identical [ 53s] compare /.build.oldpackages/powertop-2.5-1.7.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/powertop-2.5-1.8.armv7l.rpm [ 53s] Comparing powertop-2.5-1.7.armv7l.rpm to powertop-2.5-1.8.armv7l.rpm [ 53s] This is not a prerelease project. Compare the project name. [ 53s] comparing rpmtags [ 53s] comparing RELEASE [ 53s] comparing PROVIDES [ 53s] comparing scripts [ 53s] comparing filelist [ 53s] comparing file checksum [ 53s] creating rename script [ 53s] RPM file checksum differs. [ 53s] Extracting packages [ 54s] /usr/sbin/powertop differs in ELF section .rodata [ 54s] --- /tmp/tmp.hqiuo34537/tmp.hjbZV34693 2019-05-17 01:47:34.466157369 +0000 [ 54s] +++ /tmp/tmp.hqiuo34537/tmp.CNApq34695 2019-05-17 01:47:34.474157293 +0000 [ 54s] @@ -1551,8 +1551,8 @@ [ 54s] 4dfd0 65000000 63683a43 3a693a74 3a755677 e...ch:C:i:t:uVw [ 54s] 4dfe0 3a710000 506f7765 72544f50 20766572 :q..PowerTOP ver [ 54s] 4dff0 73696f6e 76322e35 2c20636f 6d70696c sionv2.5, compil [ 54s] - 4e000 6564206f 6e204a75 6c203133 20323031 ed on Jul 13 201 [ 54s] - 4e010 380a0000 55736167 653a2070 6f776572 8...Usage: power [ 54s] + 4e000 6564206f 6e204d61 79203137 20323031 ed on May 17 201 [ 54s] + 4e010 390a0000 55736167 653a2070 6f776572 9...Usage: power [ 54s] 4e020 746f7020 5b4f5054 494f4e53 5d000000 top [OPTIONS]... [ 54s] 4e030 25730a0a 00000000 72756e20 696e2022 %s......run in " [ 54s] 4e040 64656275 6722206d 6f646500 2d2d6465 debug" mode.--de [ 54s] compare /.build.oldpackages/powertop-debuginfo-2.5-1.7.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/powertop-debuginfo-2.5-1.8.armv7l.rpm [ 54s] skipping -debuginfo package [ 54s] compare /.build.oldpackages/powertop-debugsource-2.5-1.7.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/powertop-debugsource-2.5-1.8.armv7l.rpm [ 54s] Comparing powertop-debugsource-2.5-1.7.armv7l.rpm to powertop-debugsource-2.5-1.8.armv7l.rpm [ 54s] This is not a prerelease project. Compare the project name. [ 54s] comparing rpmtags [ 54s] comparing RELEASE [ 54s] comparing PROVIDES [ 54s] comparing scripts [ 54s] comparing filelist [ 54s] comparing file checksum [ 54s] creating rename script [ 54s] RPM meta information is identical [ 54s] compare /.build.oldpackages/powertop-docs-2.5-1.7.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/powertop-docs-2.5-1.8.armv7l.rpm [ 55s] Comparing powertop-docs-2.5-1.7.armv7l.rpm to powertop-docs-2.5-1.8.armv7l.rpm [ 55s] This is not a prerelease project. Compare the project name. [ 55s] comparing rpmtags [ 55s] comparing RELEASE [ 55s] comparing PROVIDES [ 55s] comparing scripts [ 55s] comparing filelist [ 55s] comparing file checksum [ 55s] creating rename script [ 55s] RPM meta information is identical [ 55s] compare /.build.oldpackages/powertop-locale-2.5-1.7.noarch.rpm /home/abuild/rpmbuild/RPMS/noarch/powertop-locale-2.5-1.8.noarch.rpm [ 55s] Comparing powertop-locale-2.5-1.7.noarch.rpm to powertop-locale-2.5-1.8.noarch.rpm [ 55s] This is not a prerelease project. Compare the project name. [ 55s] comparing rpmtags [ 55s] comparing RELEASE [ 55s] comparing PROVIDES [ 55s] comparing scripts [ 55s] comparing filelist [ 55s] comparing file checksum [ 55s] creating rename script [ 55s] RPM meta information is identical [ 55s] [ 55s] obsnw16 finished "build powertop.spec" at Fri May 17 01:47:35 UTC 2019. [ 55s]