[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_7 [ 0s] Using BUILD_ARCH=x86_64:i686:i586:i486:i386 [ 0s] [ 0s] [ 0s] obsnw19 started "build _service:gbs:powertop.spec" at Fri May 17 01:00:30 UTC 2019. [ 0s] [ 0s] Building powertop for project 'Tizen:3.0:TV' repository 'emulator64-wayland' arch 'x86_64' srcmd5 'e3ca3bf9f2dbc1489e9c913e507ba7d0' [ 0s] [ 0s] processing recipe /var/cache/build/root_7/.build-srcdir/_service:gbs:powertop.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_7/.build-srcdir/_service:gbs:powertop.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/7/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_7/.build.rpmlist /var/cache/build/root_7/.build-srcdir/_service:gbs:powertop.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/35] preinstalling libmagic-data... [ 0s] [2/35] preinstalling setup... [ 0s] [3/35] preinstalling filesystem... [ 0s] [4/35] preinstalling glibc... [ 1s] [5/35] preinstalling bash... [ 1s] [6/35] preinstalling diffutils... [ 1s] [7/35] preinstalling grep... [ 1s] [8/35] preinstalling libattr... [ 1s] [9/35] preinstalling libbz2... [ 1s] [10/35] preinstalling libcap... [ 1s] [11/35] preinstalling libelf... [ 1s] [12/35] preinstalling libfreebl3... [ 1s] [13/35] preinstalling libgcc... [ 1s] [14/35] preinstalling liblua... [ 1s] [15/35] preinstalling liblzma... [ 1s] [16/35] preinstalling libncurses... [ 1s] [17/35] preinstalling libpopt... [ 1s] [18/35] preinstalling libsmack... [ 1s] [19/35] preinstalling libsqlite... [ 1s] [20/35] preinstalling nspr... [ 1s] [21/35] preinstalling sed... [ 1s] [22/35] preinstalling zlib... [ 1s] [23/35] preinstalling coreutils... [ 1s] [24/35] preinstalling libacl... [ 1s] [25/35] preinstalling libreadline... [ 1s] [26/35] preinstalling smack... [ 1s] [27/35] preinstalling bzip2... [ 1s] [28/35] preinstalling libmagic... [ 1s] [29/35] preinstalling libxml2... [ 1s] [30/35] preinstalling tar... [ 1s] [31/35] preinstalling util-linux... [ 1s] [32/35] preinstalling util-linux-su... [ 1s] [33/35] preinstalling nss... [ 1s] [34/35] preinstalling libsoftokn3... [ 1s] [35/35] preinstalling rpm... [ 1s] [ 1s] running setup postinstall script [ 1s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 1s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 1s] initializing rpm db... [ 2s] reordering...cycle: libsoftokn3 -> nss [ 2s] breaking dependency nss -> libsoftokn3 [ 2s] done [ 2s] [1/95] installing libmagic-data-5.28-2.22 [ 2s] [2/95] installing setup-0.9-2.6 [ 2s] [3/95] installing terminfo-base-5.9-1.39 [ 2s] [4/95] installing filesystem-3.1-1.2 [ 2s] [5/95] installing glibc-2.20-3.2 [ 3s] [6/95] installing bash-3.2.57-2.1 [ 3s] [7/95] installing cpio-2.11-1.3 [ 3s] [8/95] installing diffutils-3.3-1.3 [ 3s] [9/95] installing findutils-4.3.8-1.37 [ 3s] [10/95] installing hostname-3.12-1.3 [ 3s] [11/95] installing libatomic-4.9.2-1.20 [ 3s] [12/95] installing libattr-2.4.47-1.36 [ 3s] [13/95] installing libbz2-1.0.6-1.61 [ 3s] [14/95] installing libcap-2.24-1.36 [ 4s] [15/95] installing libelf-0.153-1.46 [ 4s] [16/95] installing libext2fs-1.42.13-1.2 [ 4s] [17/95] installing libfreebl3-3.23-1.58 [ 5s] [18/95] installing libgcc-4.9.2-1.20 [ 5s] [19/95] installing libgomp-4.9.2-1.20 [ 5s] [20/95] installing libitm-4.9.2-1.20 [ 5s] [21/95] installing libltdl-2.4.2-1.43 [ 6s] [22/95] installing liblua-5.1.5-2.1 [ 6s] [23/95] installing liblzma-5.2.2-1.36 [ 6s] [24/95] installing libnl2-2.0-1.1 [ 6s] [25/95] installing libpcre-8.39-2.2 [ 7s] [26/95] installing libpopt-1.16-1.16 [ 7s] [27/95] installing libsmack-1.3.0-2.20 [ 7s] [28/95] installing libsmartcols-2.28-2.1 [ 7s] [29/95] installing libsqlite-3.8.10.2-2.6 [ 8s] [30/95] installing libuuid-2.28-2.1 [ 8s] [31/95] installing m4-1.4.17-1.3 [ 8s] [32/95] installing net-tools-2.0_20121208git-1.3 [ 8s] [33/95] installing nspr-4.12-1.21 [ 8s] [34/95] installing patch-2.7-1.16 [ 8s] [35/95] installing pkg-config-0.28-1.39 [ 8s] [36/95] installing sed-4.1c-1.3 [ 8s] [37/95] installing update-alternatives-1.16.3-1.3 [ 8s] [38/95] installing which-2.20-1.3 [ 9s] [39/95] installing zlib-1.2.8-1.43 [ 9s] [40/95] installing libncurses-5.9-1.39 [ 9s] [41/95] installing libncurses6-5.9-1.39 [ 9s] [42/95] installing build-compare-2015.04.28-1.37 [ 9s] [43/95] installing coreutils-6.9-1.3 [ 10s] [44/95] installing cpp-4.9.2-1.20 [ 10s] [45/95] installing gawk-3.1.5-1.3 [ 10s] [46/95] installing gcc-c++-4.9.2-1.20 [ 11s] [47/95] installing grep-2.5.2-1.3 [ 11s] [48/95] installing less-466-1.3 [ 11s] [49/95] installing libacl-2.2.52-1.36 [ 11s] [50/95] installing libasm-0.153-1.46 [ 11s] [51/95] installing libblkid-2.28-2.1 [ 11s] [52/95] installing libnl2-devel-2.0-1.1 [ 11s] [53/95] installing libreadline-5.2-1.38 [ 12s] [54/95] installing libstdc++-4.9.2-1.20 [ 12s] [55/95] installing make-4.0-1.16 [ 12s] [56/95] installing nss-certs-3.23-1.58 [ 12s] [57/95] installing smack-1.3.0-2.20 [ 12s] [58/95] installing binutils-2.25-1.15 [ 13s] [59/95] installing bzip2-1.0.6-1.61 [ 13s] [60/95] installing libmagic-5.28-2.22 [ 13s] [61/95] installing libxml2-2.9.4-2.34 [ 13s] [62/95] installing xz-5.2.2-1.36 [ 13s] [63/95] installing ncurses-devel-5.9-1.39 [ 13s] [64/95] installing libdw-0.153-1.46 [ 14s] [65/95] installing libstdc++-devel-4.9.2-1.20 [ 14s] [66/95] installing file-5.28-2.22 [ 14s] [67/95] installing linux-glibc-devel-3.10-1.45 [ 14s] [68/95] installing tar-1.17-1.3 [ 14s] [69/95] installing db4-4.8.30.NC-1.46 [ 15s] [70/95] installing gettext-runtime-0.19.7-1.24 [ 15s] [71/95] installing glibc-locale-2.20-3.2 [ 15s] [72/95] installing gzip-1.3.12-1.35 [ 15s] [73/95] installing libcilkrts-4.9.2-1.20 [ 16s] [74/95] installing libfdisk1-2.28-2.1 [ 16s] [75/95] installing libmount-2.28-2.1 [ 16s] [76/95] installing libubsan-4.9.2-1.20 [ 17s] [77/95] installing pam-1.1.6-1.2 [ 17s] [78/95] installing tzdata-2016i-2.3 [ 17s] [79/95] installing elfutils-0.153-1.46 [ 17s] [80/95] installing glibc-devel-2.20-3.2 [ 17s] [81/95] installing gettext-tools-0.19.7-1.24 [ 18s] [82/95] installing perl-5.20.0-1.50 [ 19s] [83/95] installing gcc-4.9.2-1.20 [ 20s] [84/95] installing util-linux-2.28-2.1 [ 20s] [85/95] installing build-mkbaselibs-20120927-1.3 [ 20s] [86/95] installing autoconf-2.69-1.43 [ 20s] [87/95] installing util-linux-su-2.28-2.1 [ 20s] [88/95] installing zlib-devel-1.2.8-1.43 [ 20s] [89/95] installing automake-1.14.1-1.39 [ 21s] [90/95] installing build-20120927-1.3 [ 21s] [91/95] installing libtool-2.4.2-1.43 [ 21s] [92/95] installing nss-3.23-1.58 [ 21s] [93/95] installing libsoftokn3-3.23-1.58 [ 21s] [94/95] installing rpm-4.11.0.1-2.16 [ 22s] [95/95] installing rpm-build-4.11.0.1-2.16 [ 22s] removing nis flags from /var/cache/build/root_7/etc/nsswitch.conf... [ 22s] now finalizing build dir... [ 22s] Running build time source services... [ 22s] ----------------------------------------------------------------- [ 22s] I have the following modifications for powertop.spec: [ 22s] 4c4 [ 22s] < Release: 1 [ 22s] --- [ 22s] > Release: 1.9 [ 22s] 11c11 [ 22s] < BuildRequires: gettext [ 22s] --- [ 22s] > BuildRequires: gettext-tools [ 22s] 46a47 [ 22s] > %changelog [ 22s] ----------------------------------------------------------------- [ 22s] ----- building powertop.spec (user abuild) [ 22s] ----------------------------------------------------------------- [ 22s] ----------------------------------------------------------------- [ 22s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0:TV/emulator64-wayland/e3ca3bf9f2dbc1489e9c913e507ba7d0-powertop' -ba /home/abuild/rpmbuild/SOURCES/powertop.spec [ 22s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.KUfjzK [ 22s] + umask 022 [ 22s] + cd /home/abuild/rpmbuild/BUILD [ 22s] + cd /home/abuild/rpmbuild/BUILD [ 22s] + rm -rf powertop-2.5 [ 22s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/powertop-2.5.tar.gz [ 22s] + /bin/tar -xf - [ 22s] + STATUS=0 [ 22s] + '[' 0 -ne 0 ']' [ 22s] + cd powertop-2.5 [ 22s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 22s] + cp /home/abuild/rpmbuild/SOURCES/powertop.manifest . [ 22s] + exit 0 [ 22s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.dcp5vk [ 22s] + umask 022 [ 22s] + cd /home/abuild/rpmbuild/BUILD [ 22s] + cd powertop-2.5 [ 22s] ++ uname -m [ 22s] + [[ x86_64 == \a\a\r\c\h\6\4 ]] [ 22s] + LANG=C [ 22s] + export LANG [ 22s] + unset DISPLAY [ 22s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=corei7 -msse4.2 -mtune=corei7-avx -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 22s] + export CFLAGS [ 22s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=corei7 -msse4.2 -mtune=corei7-avx -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 22s] + export CXXFLAGS [ 22s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=corei7 -msse4.2 -mtune=corei7-avx -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I%_fmoddir' [ 22s] + export FFLAGS [ 22s] + LDFLAGS= [ 22s] + export LDFLAGS [ 22s] + LD_AS_NEEDED=1 [ 22s] + export LD_AS_NEEDED [ 22s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=corei7 -msse4.2 -mtune=corei7-avx -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 22s] + export CFLAGS [ 22s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=corei7 -msse4.2 -mtune=corei7-avx -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 22s] + export CXXFLAGS [ 22s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=corei7 -msse4.2 -mtune=corei7-avx -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I%_fmoddir' [ 22s] + export FFLAGS [ 22s] + ./configure --build=x86_64-tizen-linux-gnu --host=x86_64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --disable-static [ 22s] checking for a BSD-compatible install... /bin/install -c [ 22s] checking whether build environment is sane... yes [ 22s] /home/abuild/rpmbuild/BUILD/powertop-2.5/missing: Unknown `--is-lightweight' option [ 22s] Try `/home/abuild/rpmbuild/BUILD/powertop-2.5/missing --help' for more information [ 22s] configure: WARNING: 'missing' script is too old or missing [ 22s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 22s] checking for gawk... gawk [ 22s] checking whether make sets $(MAKE)... yes [ 22s] checking whether make supports nested variables... yes [ 22s] checking whether make supports nested variables... (cached) yes [ 22s] checking whether NLS is requested... yes [ 22s] checking for msgfmt... /bin/msgfmt [ 22s] checking for gmsgfmt... /bin/msgfmt [ 23s] checking for xgettext... /bin/xgettext [ 23s] checking for msgmerge... /bin/msgmerge [ 23s] checking for style of include used by make... GNU [ 23s] checking for x86_64-tizen-linux-gnu-gcc... x86_64-tizen-linux-gnu-gcc [ 23s] checking whether the C compiler works... yes [ 23s] checking for C compiler default output file name... a.out [ 23s] checking for suffix of executables... [ 23s] checking whether we are cross compiling... no [ 23s] checking for suffix of object files... o [ 23s] checking whether we are using the GNU C compiler... yes [ 23s] checking whether x86_64-tizen-linux-gnu-gcc accepts -g... yes [ 23s] checking for x86_64-tizen-linux-gnu-gcc option to accept ISO C89... none needed [ 23s] checking dependency style of x86_64-tizen-linux-gnu-gcc... gcc3 [ 23s] checking build system type... x86_64-tizen-linux-gnu [ 23s] checking host system type... x86_64-tizen-linux-gnu [ 23s] checking for ld used by GCC... /usr/x86_64-tizen-linux-gnu/bin/ld [ 23s] checking if the linker (/usr/x86_64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 23s] checking for shared library run path origin... done [ 23s] checking for x86_64-tizen-linux-gnu-g++... x86_64-tizen-linux-gnu-g++ [ 23s] checking whether we are using the GNU C++ compiler... yes [ 23s] checking whether x86_64-tizen-linux-gnu-g++ accepts -g... yes [ 23s] checking dependency style of x86_64-tizen-linux-gnu-g++... gcc3 [ 23s] checking how to run the C++ preprocessor... x86_64-tizen-linux-gnu-g++ -E [ 23s] checking for grep that handles long lines and -e... /bin/grep [ 23s] checking for egrep... /bin/grep -E [ 23s] checking for CFPreferencesCopyAppValue... no [ 23s] checking for CFLocaleCopyCurrent... no [ 23s] checking for GNU gettext in libc... yes [ 23s] checking whether to use NLS... yes [ 23s] checking where the gettext function comes from... libc [ 23s] checking for x86_64-tizen-linux-gnu-ar... no [ 23s] checking for x86_64-tizen-linux-gnu-lib... no [ 23s] checking for x86_64-tizen-linux-gnu-link... no [ 23s] checking for ar... ar [ 23s] checking the archiver (ar) interface... ar [ 23s] checking how to run the C preprocessor... x86_64-tizen-linux-gnu-gcc -E [ 23s] checking whether we are using the GNU C++ compiler... (cached) yes [ 23s] checking whether x86_64-tizen-linux-gnu-g++ accepts -g... (cached) yes [ 23s] checking dependency style of x86_64-tizen-linux-gnu-g++... (cached) gcc3 [ 23s] checking how to print strings... printf [ 23s] checking for a sed that does not truncate output... /bin/sed [ 23s] checking for fgrep... /bin/grep -F [ 23s] checking for ld used by x86_64-tizen-linux-gnu-gcc... /usr/x86_64-tizen-linux-gnu/bin/ld [ 23s] checking if the linker (/usr/x86_64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 23s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 23s] checking the name lister (/bin/nm -B) interface... BSD nm [ 23s] checking whether ln -s works... yes [ 23s] checking the maximum length of command line arguments... 1572864 [ 23s] checking whether the shell understands some XSI constructs... yes [ 23s] checking whether the shell understands "+="... yes [ 23s] checking how to convert x86_64-tizen-linux-gnu file names to x86_64-tizen-linux-gnu format... func_convert_file_noop [ 23s] checking how to convert x86_64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 23s] checking for /usr/x86_64-tizen-linux-gnu/bin/ld option to reload object files... -r [ 23s] checking for x86_64-tizen-linux-gnu-objdump... no [ 23s] checking for objdump... objdump [ 23s] checking how to recognize dependent libraries... pass_all [ 23s] checking for x86_64-tizen-linux-gnu-dlltool... no [ 23s] checking for dlltool... no [ 23s] checking how to associate runtime and link libraries... printf %s\n [ 23s] checking for x86_64-tizen-linux-gnu-ar... ar [ 23s] checking for archiver @FILE support... @ [ 23s] checking for x86_64-tizen-linux-gnu-strip... no [ 23s] checking for strip... strip [ 23s] checking for x86_64-tizen-linux-gnu-ranlib... no [ 23s] checking for ranlib... ranlib [ 23s] checking command to parse /bin/nm -B output from x86_64-tizen-linux-gnu-gcc object... ok [ 23s] checking for sysroot... no [ 23s] checking for x86_64-tizen-linux-gnu-mt... no [ 23s] checking for mt... no [ 23s] checking if : is a manifest tool... no [ 23s] checking for ANSI C header files... yes [ 23s] checking for sys/types.h... yes [ 23s] checking for sys/stat.h... yes [ 23s] checking for stdlib.h... yes [ 23s] checking for string.h... yes [ 23s] checking for memory.h... yes [ 24s] checking for strings.h... yes [ 24s] checking for inttypes.h... yes [ 24s] checking for stdint.h... yes [ 24s] checking for unistd.h... yes [ 24s] checking for dlfcn.h... yes [ 24s] checking for objdir... .libs [ 24s] checking if x86_64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no [ 24s] checking for x86_64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC [ 24s] checking if x86_64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes [ 24s] checking if x86_64-tizen-linux-gnu-gcc static flag -static works... no [ 24s] checking if x86_64-tizen-linux-gnu-gcc supports -c -o file.o... yes [ 24s] checking if x86_64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes [ 24s] checking whether the x86_64-tizen-linux-gnu-gcc linker (/usr/x86_64-tizen-linux-gnu/bin/ld -m elf_x86_64) supports shared libraries... yes [ 24s] checking whether -lc should be explicitly linked in... no [ 24s] checking dynamic linker characteristics... GNU/Linux ld.so [ 24s] checking how to hardcode library paths into programs... immediate [ 24s] checking whether stripping libraries is possible... yes [ 24s] checking if libtool supports shared libraries... yes [ 24s] checking whether to build shared libraries... yes [ 24s] checking whether to build static libraries... no [ 24s] checking how to run the C++ preprocessor... x86_64-tizen-linux-gnu-g++ -E [ 24s] checking for ld used by x86_64-tizen-linux-gnu-g++... /usr/x86_64-tizen-linux-gnu/bin/ld -m elf_x86_64 [ 24s] checking if the linker (/usr/x86_64-tizen-linux-gnu/bin/ld -m elf_x86_64) is GNU ld... yes [ 24s] checking whether the x86_64-tizen-linux-gnu-g++ linker (/usr/x86_64-tizen-linux-gnu/bin/ld -m elf_x86_64) supports shared libraries... yes [ 24s] checking for x86_64-tizen-linux-gnu-g++ option to produce PIC... -fPIC -DPIC [ 24s] checking if x86_64-tizen-linux-gnu-g++ PIC flag -fPIC -DPIC works... yes [ 24s] checking if x86_64-tizen-linux-gnu-g++ static flag -static works... no [ 24s] checking if x86_64-tizen-linux-gnu-g++ supports -c -o file.o... yes [ 24s] checking if x86_64-tizen-linux-gnu-g++ supports -c -o file.o... (cached) yes [ 24s] checking whether the x86_64-tizen-linux-gnu-g++ linker (/usr/x86_64-tizen-linux-gnu/bin/ld -m elf_x86_64) supports shared libraries... yes [ 24s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 24s] checking how to hardcode library paths into programs... immediate [ 24s] checking for x86_64-tizen-linux-gnu-gcc... (cached) x86_64-tizen-linux-gnu-gcc [ 24s] checking whether we are using the GNU C compiler... (cached) yes [ 24s] checking whether x86_64-tizen-linux-gnu-gcc accepts -g... (cached) yes [ 24s] checking for x86_64-tizen-linux-gnu-gcc option to accept ISO C89... (cached) none needed [ 24s] checking dependency style of x86_64-tizen-linux-gnu-gcc... (cached) gcc3 [ 24s] checking whether x86_64-tizen-linux-gnu-gcc and cc understand -c and -o together... yes [ 24s] checking fcntl.h usability... yes [ 24s] checking fcntl.h presence... yes [ 24s] checking for fcntl.h... yes [ 24s] checking libintl.h usability... yes [ 24s] checking libintl.h presence... yes [ 24s] checking for libintl.h... yes [ 24s] checking limits.h usability... yes [ 24s] checking limits.h presence... yes [ 24s] checking for limits.h... yes [ 24s] checking locale.h usability... yes [ 24s] checking locale.h presence... yes [ 24s] checking for locale.h... yes [ 25s] checking malloc.h usability... yes [ 25s] checking malloc.h presence... yes [ 25s] checking for malloc.h... yes [ 25s] checking for stdint.h... (cached) yes [ 25s] checking for stdlib.h... (cached) yes [ 25s] checking for string.h... (cached) yes [ 25s] checking sys/ioctl.h usability... yes [ 25s] checking sys/ioctl.h presence... yes [ 25s] checking for sys/ioctl.h... yes [ 25s] checking sys/socket.h usability... yes [ 25s] checking sys/socket.h presence... yes [ 25s] checking for sys/socket.h... yes [ 25s] checking sys/statfs.h usability... yes [ 25s] checking sys/statfs.h presence... yes [ 25s] checking for sys/statfs.h... yes [ 25s] checking sys/time.h usability... yes [ 25s] checking sys/time.h presence... yes [ 25s] checking for sys/time.h... yes [ 25s] checking termios.h usability... yes [ 25s] checking termios.h presence... yes [ 25s] checking for termios.h... yes [ 25s] checking for unistd.h... (cached) yes [ 25s] checking ncurses.h usability... yes [ 25s] checking ncurses.h presence... yes [ 25s] checking for ncurses.h... yes [ 25s] checking for stdbool.h that conforms to C99... yes [ 25s] checking for _Bool... no [ 25s] checking for inline... inline [ 25s] checking for int64_t... yes [ 25s] checking for pid_t... yes [ 25s] checking for size_t... yes [ 25s] checking for ssize_t... yes [ 25s] checking for uint16_t... yes [ 25s] checking for uint32_t... yes [ 25s] checking for uint64_t... yes [ 25s] checking for stdlib.h... (cached) yes [ 25s] checking for GNU libc compatible malloc... yes [ 26s] checking for stdlib.h... (cached) yes [ 26s] checking for unistd.h... (cached) yes [ 26s] checking for sys/param.h... yes [ 26s] checking for getpagesize... yes [ 26s] checking for working mmap... yes [ 26s] checking for stdlib.h... (cached) yes [ 26s] checking for GNU libc compatible realloc... yes [ 26s] checking for working strtod... yes [ 26s] checking for fdatasync... yes [ 26s] checking for getpagesize... (cached) yes [ 26s] checking for gettimeofday... yes [ 26s] checking for memmove... yes [ 26s] checking for memset... yes [ 26s] checking for mkdir... yes [ 26s] checking for munmap... yes [ 26s] checking for pow... yes [ 26s] checking for realpath... yes [ 26s] checking for regcomp... yes [ 26s] checking for select... yes [ 26s] checking for setlocale... yes [ 26s] checking for socket... yes [ 26s] checking for sqrt... yes [ 26s] checking for strcasecmp... yes [ 26s] checking for strchr... yes [ 27s] checking for strdup... yes [ 27s] checking for strerror... yes [ 27s] checking for strncasecmp... yes [ 27s] checking for strstr... yes [ 27s] checking for strtoul... yes [ 27s] checking for strtoull... yes [ 27s] checking for library containing delwin... -lncursesw [ 27s] checking for x86_64-tizen-linux-gnu-pkg-config... /bin/x86_64-tizen-linux-gnu-pkg-config [ 27s] checking pkg-config is at least version 0.9.0... yes [ 27s] checking for PCIUTILS... no [ 27s] checking for library containing pci_get_dev... no [ 27s] checking for LIBNL... no [ 27s] checking for LIBNL... yes [ 27s] configure: WARNING: [ 27s] ************* LIBPCI SUPPORT NOT CONFIGURED************** [ 27s] If you need or want pci support, please install libpci [ 27s] and re-configure PowerTOP. [ 27s] ********************************************************* [ 27s] [ 27s] checking for library containing pthread_create... -lpthread [ 27s] checking for library containing inet_aton... none required [ 27s] checking that generated files are newer than configure... done [ 27s] configure: creating ./config.status [ 27s] config.status: creating Makefile [ 27s] config.status: creating src/Makefile [ 27s] config.status: creating traceevent/Makefile [ 27s] config.status: creating po/Makefile.in [ 27s] config.status: creating doc/Makefile [ 27s] config.status: creating config.h [ 28s] config.status: executing po-directories commands [ 28s] config.status: creating po/POTFILES [ 28s] config.status: creating po/Makefile [ 28s] config.status: executing depfiles commands [ 28s] config.status: executing libtool commands [ 28s] + make -j4 [ 28s] make all-recursive [ 28s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 28s] Making all in traceevent [ 28s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/traceevent' [ 28s] CC event-parse.lo [ 28s] CC parse-filter.lo [ 28s] CC parse-utils.lo [ 28s] CC trace-seq.lo [ 28s] event-parse.c: In function '__read_token': [ 28s] event-parse.c:854:3: warning: implicit declaration of function 'asprintf' [-Wimplicit-function-declaration] [ 28s] if (asprintf(tok, "%c", ch) < 0) [ 28s] ^ [ 28s] event-parse.c: In function 'pevent_strerror': [ 28s] event-parse.c:5118:7: warning: assignment makes pointer from integer without a cast [ 28s] msg = strerror_r(errnum, buf, buflen); [ 28s] ^ [ 28s] parse-filter.c: In function 'arg_to_str': [ 28s] parse-filter.c:2034:8: warning: 'op' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 28s] char *op; [ 28s] ^ [ 28s] parse-filter.c: In function 'reparent_op_arg': [ 28s] parse-filter.c:752:7: warning: 'ptr' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 28s] *ptr = NULL; [ 28s] ^ [ 28s] parse-filter.c:756:3: warning: 'other_child' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 28s] free_arg(other_child); [ 28s] ^ [ 29s] event-parse.c: In function 'pevent_find_event_by_name': [ 29s] event-parse.c:3225:21: warning: 'event' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 29s] pevent->last_event = event; [ 29s] ^ [ 29s] event-parse.c: In function 'pevent_data_lat_fmt': [ 29s] event-parse.c:4352:4: warning: 'migrate_disable' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 29s] trace_seq_printf(s, "%d", migrate_disable); [ 29s] ^ [ 29s] event-parse.c:4359:4: warning: 'lock_depth' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 29s] trace_seq_printf(s, "%d", lock_depth); [ 29s] ^ [ 29s] event-parse.c: In function 'pevent_event_info': [ 29s] event-parse.c:4259:5: warning: 'len_arg' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 29s] print_str_arg(s, data, size, event, [ 29s] ^ [ 29s] event-parse.c:4056:6: note: 'len_arg' was declared here [ 29s] int len_arg; [ 29s] ^ [ 29s] CCLD libtraceevnet.la [ 29s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/traceevent' [ 29s] Making all in src [ 29s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 29s] make all-am [ 29s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 29s] CXX powertop-devlist.o [ 29s] CXX powertop-lib.o [ 29s] CXX powertop-display.o [ 29s] CXX report/powertop-report-maker.o [ 29s] CXX report/powertop-report-formatter-base.o [ 29s] In file included from /usr/include/stdio.h:27:0, [ 29s] from report/report-formatter-base.cpp:31: [ 29s] /usr/include/features.h:148:3: warning: #warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [-Wcpp] [ 29s] # warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [ 29s] ^ [ 29s] CXX report/powertop-report-formatter-csv.o [ 29s] In file included from /usr/include/stdio.h:27:0, [ 29s] from report/report-formatter-csv.cpp:31: [ 29s] /usr/include/features.h:148:3: warning: #warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [-Wcpp] [ 29s] # warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [ 29s] ^ [ 29s] CXX report/powertop-report-formatter-html.o [ 29s] CXX powertop-main.o [ 29s] In file included from /usr/include/stdio.h:27:0, [ 29s] from report/report-formatter-html.cpp:31: [ 29s] /usr/include/features.h:148:3: warning: #warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [-Wcpp] [ 29s] # warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [ 29s] ^ [ 30s] CXX cpu/powertop-intel_gpu.o [ 30s] CXX cpu/powertop-cpu_rapl_device.o [ 30s] CXX cpu/powertop-dram_rapl_device.o [ 30s] CXX devices/powertop-gpu_rapl_device.o [ 30s] CXX parameters/powertop-persistent.o [ 30s] CXX parameters/powertop-learn.o [ 30s] CXX parameters/powertop-parameters.o [ 30s] CXX cpu/powertop-cpu_core.o [ 30s] CXX cpu/powertop-cpudevice.o [ 30s] CXX cpu/powertop-cpu.o [ 30s] CXX cpu/powertop-cpu_linux.o [ 30s] CXX cpu/powertop-abstract_cpu.o [ 31s] CXX cpu/powertop-cpu_package.o [ 31s] CXX cpu/powertop-intel_cpus.o [ 31s] CXX report/powertop-report.o [ 31s] CXX process/powertop-process.o [ 31s] CXX process/powertop-processdevice.o [ 31s] CXX process/powertop-powerconsumer.o [ 31s] CXX process/powertop-timer.o [ 31s] CXX process/powertop-work.o [ 31s] CXX process/powertop-do_process.o [ 31s] CXX process/powertop-interrupt.o [ 32s] CXX perf/powertop-perf.o [ 32s] CXX perf/powertop-perf_bundle.o [ 32s] CXX devices/powertop-i915-gpu.o [ 32s] CXX devices/powertop-device.o [ 32s] CXX devices/powertop-alsa.o [ 32s] CXX devices/powertop-runtime_pm.o [ 32s] CXX devices/powertop-thinkpad-fan.o [ 32s] CXX devices/powertop-usb.o [ 32s] CXX devices/powertop-ahci.o [ 33s] CXX devices/powertop-thinkpad-light.o [ 33s] CXX devices/powertop-rfkill.o [ 33s] CXX devices/powertop-backlight.o [ 33s] CXX devices/powertop-network.o [ 33s] CXX tuning/powertop-bluetooth.o [ 33s] CXX tuning/powertop-cpufreq.o [ 33s] tuning/bluetooth.cpp: In member function 'virtual void bt_tunable::toggle()': [ 33s] tuning/bluetooth.cpp:179:55: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 33s] system("/usr/sbin/hciconfig hci0 up &> /dev/null &"); [ 33s] ^ [ 33s] tuning/bluetooth.cpp:182:54: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 33s] system("/usr/sbin/hciconfig hci0 down &> /dev/null"); [ 33s] ^ [ 33s] CXX tuning/powertop-tuning.o [ 33s] tuning/cpufreq.cpp: In member function 'virtual void cpufreq_tunable::toggle()': [ 33s] tuning/cpufreq.cpp:119:60: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 33s] system("/sbin/modprobe cpufreq_ondemand > /dev/null 2>&1"); [ 33s] ^ [ 33s] CXX tuning/powertop-tuningusb.o [ 33s] CXX tuning/powertop-ethernet.o [ 33s] CXX tuning/powertop-tunable.o [ 33s] CC tuning/powertop-iw.o [ 33s] CXX tuning/powertop-wifi.o [ 33s] CXX tuning/powertop-tuningsysfs.o [ 33s] CXX tuning/powertop-runtime.o [ 34s] CXX calibrate/powertop-calibrate.o [ 34s] CXX measurement/powertop-measurement.o [ 34s] calibrate/calibrate.cpp: In function 'void idle_calibration()': [ 34s] calibrate/calibrate.cpp:361:51: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 34s] system("DISPLAY=:0 /usr/bin/xset dpms force off"); [ 34s] ^ [ 34s] calibrate/calibrate.cpp:363:50: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 34s] system("DISPLAY=:0 /usr/bin/xset dpms force on"); [ 34s] ^ [ 34s] calibrate/calibrate.cpp: In function 'void* burn_disk(void*)': [ 34s] calibrate/calibrate.cpp:242:29: warning: ignoring return value of 'ssize_t write(int, const void*, size_t)', declared with attribute warn_unused_result [-Wunused-result] [ 34s] write(fd, buffer, 64*1024); [ 34s] ^ [ 34s] calibrate/calibrate.cpp: In function 'void backlight_calibration()': [ 34s] calibrate/calibrate.cpp:353:51: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 34s] system("DISPLAY=:0 /usr/bin/xset dpms force off"); [ 34s] ^ [ 34s] calibrate/calibrate.cpp:355:50: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 34s] system("DISPLAY=:0 /usr/bin/xset dpms force on"); [ 34s] ^ [ 34s] CXX measurement/powertop-acpi.o [ 34s] CXX measurement/powertop-sysfs.o [ 34s] CXX measurement/powertop-extech.o [ 34s] CXX cpu/rapl/powertop-rapl_interface.o [ 34s] measurement/extech.cpp: In member function 'void extech_power_meter::measure()': [ 34s] measurement/extech.cpp:290:19: warning: ignoring return value of 'ssize_t write(int, const void*, size_t)', declared with attribute warn_unused_result [-Wunused-result] [ 34s] write(fd, " ", 1); [ 34s] ^ [ 34s] CXXLD powertop [ 34s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 34s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 34s] Making all in po [ 34s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/po' [ 34s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/po' [ 34s] Making all in doc [ 34s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/doc' [ 34s] make[2]: Nothing to be done for 'all'. [ 34s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/doc' [ 34s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 34s] make[2]: Nothing to be done for 'all-am'. [ 34s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 34s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 34s] + exit 0 [ 34s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.aXb6Cw [ 34s] + umask 022 [ 34s] + cd /home/abuild/rpmbuild/BUILD [ 34s] + cd powertop-2.5 [ 34s] + LANG=C [ 34s] + export LANG [ 34s] + unset DISPLAY [ 34s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.9.x86_64 [ 34s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.9.x86_64 [ 34s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.9.x86_64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.9.x86_64 install [ 34s] Making install in traceevent [ 34s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/traceevent' [ 34s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/traceevent' [ 34s] make[2]: Nothing to be done for 'install-exec-am'. [ 34s] make[2]: Nothing to be done for 'install-data-am'. [ 34s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/traceevent' [ 34s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/traceevent' [ 34s] Making install in src [ 34s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 34s] /bin/make install-am [ 35s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 35s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 35s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.9.x86_64/usr/sbin' [ 35s] /bin/sh ../libtool --mode=install /bin/install -c powertop '/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.9.x86_64/usr/sbin' [ 35s] libtool: install: /bin/install -c powertop /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.9.x86_64/usr/sbin/powertop [ 35s] make[3]: Nothing to be done for 'install-data-am'. [ 35s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 35s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 35s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 35s] Making install in po [ 35s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/po' [ 35s] installing ca.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.9.x86_64/usr/share/locale/ca/LC_MESSAGES/powertop.mo [ 35s] installing cs_CZ.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.9.x86_64/usr/share/locale/cs_CZ/LC_MESSAGES/powertop.mo [ 35s] installing de_DE.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.9.x86_64/usr/share/locale/de_DE/LC_MESSAGES/powertop.mo [ 35s] installing en_GB.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.9.x86_64/usr/share/locale/en_GB/LC_MESSAGES/powertop.mo [ 35s] installing en_US.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.9.x86_64/usr/share/locale/en_US/LC_MESSAGES/powertop.mo [ 35s] installing es_ES.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.9.x86_64/usr/share/locale/es_ES/LC_MESSAGES/powertop.mo [ 35s] installing hu_HU.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.9.x86_64/usr/share/locale/hu_HU/LC_MESSAGES/powertop.mo [ 35s] installing id_ID.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.9.x86_64/usr/share/locale/id_ID/LC_MESSAGES/powertop.mo [ 35s] installing nl_NL.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.9.x86_64/usr/share/locale/nl_NL/LC_MESSAGES/powertop.mo [ 35s] installing zh_TW.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.9.x86_64/usr/share/locale/zh_TW/LC_MESSAGES/powertop.mo [ 35s] if test "powertop" = "gettext-tools"; then \ [ 35s] /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.9.x86_64/usr/share/gettext/po; \ [ 35s] for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ [ 35s] /bin/install -c -m 644 ./$file \ [ 35s] /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.9.x86_64/usr/share/gettext/po/$file; \ [ 35s] done; \ [ 35s] for file in Makevars; do \ [ 35s] rm -f /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.9.x86_64/usr/share/gettext/po/$file; \ [ 35s] done; \ [ 35s] else \ [ 35s] : ; \ [ 35s] fi [ 35s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/po' [ 35s] Making install in doc [ 35s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/doc' [ 35s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/doc' [ 35s] make[2]: Nothing to be done for 'install-exec-am'. [ 35s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.9.x86_64/usr/share/man/man8' [ 35s] /bin/install -c -m 644 powertop.8 '/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.9.x86_64/usr/share/man/man8' [ 35s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/doc' [ 35s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/doc' [ 35s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 35s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 35s] make[2]: Nothing to be done for 'install-exec-am'. [ 35s] make[2]: Nothing to be done for 'install-data-am'. [ 35s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 35s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 35s] + rm -f /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.9.x86_64/usr/share/info/dir [ 35s] + find /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.9.x86_64 -regex '.*\.la$' [ 35s] + xargs rm -f -- [ 35s] + find /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.9.x86_64 -regex '.*\.a$' [ 35s] + xargs rm -f -- [ 35s] + /usr/lib/rpm/find-lang.sh /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.9.x86_64 powertop [ 35s] removing translation /usr/share/locale/hu_HU/LC_MESSAGES/powertop.mo: 118 translated messages. [ 35s] removing translation /usr/share/locale/id_ID/LC_MESSAGES/powertop.mo: 125 translated messages. [ 35s] removing translation /usr/share/locale/nl_NL/LC_MESSAGES/powertop.mo: 24 translated messages. [ 35s] find: `/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.9.x86_64/usr/share/help/': No such file or directory [ 35s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/powertop-2.5 [ 35s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.9.x86_64/usr/sbin/powertop [ 35s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 35s] cpio: glibc-2.20/csu/init.c: Cannot stat: No such file or directory [ 35s] cpio: glibc-2.20/sysdeps/x86_64/crti.S: Cannot stat: No such file or directory [ 35s] cpio: glibc-2.20/sysdeps/x86_64/crtn.S: Cannot stat: No such file or directory [ 35s] cpio: glibc-2.20/sysdeps/x86_64/start.S: Cannot stat: No such file or directory [ 35s] 1393 blocks [ 35s] + /usr/lib/rpm/check-buildroot [ 35s] + /usr/lib/rpm//brp-compress [ 35s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 35s] + /usr/lib/rpm/brp-python-hardlink [ 35s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.9.x86_64 [ 35s] Processing files: powertop-2.5-1.9.x86_64 [ 35s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 35s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 35s] [ 35s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.XjxZWK [ 35s] + umask 022 [ 35s] + cd /home/abuild/rpmbuild/BUILD [ 35s] + cd powertop-2.5 [ 35s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.9.x86_64/usr/share/licenses/powertop [ 35s] + export LICENSEDIR [ 35s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.9.x86_64/usr/share/licenses/powertop [ 35s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.9.x86_64/usr/share/licenses/powertop [ 35s] + exit 0 [ 35s] Provides: powertop = 2.5-1.9 powertop(x86-64) = 2.5-1.9 [ 35s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 35s] Requires: libc.so.6()(64bit) libc.so.6(GLIBC_2.14)(64bit) libc.so.6(GLIBC_2.15)(64bit) libc.so.6(GLIBC_2.2.5)(64bit) libc.so.6(GLIBC_2.3)(64bit) libc.so.6(GLIBC_2.3.4)(64bit) libc.so.6(GLIBC_2.4)(64bit) libgcc_s.so.1()(64bit) libgcc_s.so.1(GCC_3.0)(64bit) libm.so.6()(64bit) libm.so.6(GLIBC_2.2.5)(64bit) libncursesw.so.5()(64bit) libnl-genl.so.2()(64bit) libnl.so.2()(64bit) libpthread.so.0()(64bit) libpthread.so.0(GLIBC_2.2.5)(64bit) libstdc++.so.6()(64bit) libstdc++.so.6(CXXABI_1.3)(64bit) libstdc++.so.6(GLIBCXX_3.4)(64bit) libstdc++.so.6(GLIBCXX_3.4.11)(64bit) libstdc++.so.6(GLIBCXX_3.4.9)(64bit) libtinfo.so.5()(64bit) [ 35s] Processing files: powertop-debugsource-2.5-1.9.x86_64 [ 35s] Provides: powertop-debugsource = 2.5-1.9 powertop-debugsource(x86-64) = 2.5-1.9 [ 35s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 35s] Processing files: powertop-docs-2.5-1.9.x86_64 [ 35s] Provides: powertop-docs = 2.5-1.9 powertop-docs(x86-64) = 2.5-1.9 [ 35s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 35s] Processing files: powertop-locale-2.5-1.9.noarch [ 35s] Provides: powertop-lang-all = 2.5 powertop-locale = 2.5-1.9 [ 35s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 35s] Processing files: powertop-debuginfo-2.5-1.9.x86_64 [ 35s] Provides: powertop-debuginfo = 2.5-1.9 powertop-debuginfo(x86-64) = 2.5-1.9 [ 35s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 35s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.9.x86_64 [ 35s] Wrote: /home/abuild/rpmbuild/SRPMS/powertop-2.5-1.9.src.rpm [ 35s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/powertop-2.5-1.9.x86_64.rpm [ 36s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/powertop-debugsource-2.5-1.9.x86_64.rpm [ 36s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/powertop-docs-2.5-1.9.x86_64.rpm [ 36s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/powertop-locale-2.5-1.9.noarch.rpm [ 37s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/powertop-debuginfo-2.5-1.9.x86_64.rpm [ 37s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.t9kafz [ 37s] + umask 022 [ 37s] + cd /home/abuild/rpmbuild/BUILD [ 37s] + cd powertop-2.5 [ 37s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.9.x86_64 [ 37s] + exit 0 [ 37s] ... checking for files with abuild user/group [ 37s] ... creating baselibs [ 37s] ... comparing built packages with the former built [ 37s] /usr/lib/build/pkg-diff.sh [ 37s] compare /.build.oldpackages/powertop-2.5-1.8.src.rpm /home/abuild/rpmbuild/SRPMS/powertop-2.5-1.9.src.rpm [ 37s] This is not a prerelease project. Compare the project name. [ 37s] comparing rpmtags [ 37s] comparing RELEASE [ 37s] comparing PROVIDES [ 37s] comparing scripts [ 37s] comparing filelist [ 37s] comparing file checksum [ 37s] RPM meta information is identical [ 37s] compare /.build.oldpackages/powertop-2.5-1.8.x86_64.rpm /home/abuild/rpmbuild/RPMS/x86_64/powertop-2.5-1.9.x86_64.rpm [ 38s] Comparing powertop-2.5-1.8.x86_64.rpm to powertop-2.5-1.9.x86_64.rpm [ 38s] This is not a prerelease project. Compare the project name. [ 38s] comparing rpmtags [ 38s] comparing RELEASE [ 38s] comparing PROVIDES [ 38s] comparing scripts [ 38s] comparing filelist [ 38s] comparing file checksum [ 38s] creating rename script [ 38s] RPM file checksum differs. [ 38s] Extracting packages [ 39s] /usr/sbin/powertop differs in ELF section .rodata [ 39s] --- /tmp/tmp.leBR100230/tmp.LwFP100795 2019-05-17 01:01:09.039414253 +0000 [ 39s] +++ /tmp/tmp.leBR100230/tmp.UjLl100798 2019-05-17 01:01:09.043414130 +0000 [ 39s] @@ -1856,8 +1856,8 @@ [ 39s] 457e70 6f662025 64207365 636f6e64 28732920 of %d second(s) [ 39s] 457e80 65616368 2e0a0000 506f7765 72544f50 each....PowerTOP [ 39s] 457e90 20766572 73696f6e 76322e35 2c20636f versionv2.5, co [ 39s] - 457ea0 6d70696c 6564206f 6e204a75 6c203133 mpiled on Jul 13 [ 39s] - 457eb0 20323031 380a0000 72756e73 20706f77 2018...runs pow [ 39s] + 457ea0 6d70696c 6564206f 6e204d61 79203137 mpiled on May 17 [ 39s] + 457eb0 20323031 390a0000 72756e73 20706f77 2019...runs pow [ 39s] 457ec0 6572746f 7020696e 2063616c 69627261 ertop in calibra [ 39s] 457ed0 74696f6e 206d6f64 65000000 00000000 tion mode....... [ 39s] 457ee0 53657473 20616c6c 2074756e 61626c65 Sets all tunable [ 39s] compare /.build.oldpackages/powertop-debuginfo-2.5-1.8.x86_64.rpm /home/abuild/rpmbuild/RPMS/x86_64/powertop-debuginfo-2.5-1.9.x86_64.rpm [ 39s] skipping -debuginfo package [ 39s] compare /.build.oldpackages/powertop-debugsource-2.5-1.8.x86_64.rpm /home/abuild/rpmbuild/RPMS/x86_64/powertop-debugsource-2.5-1.9.x86_64.rpm [ 39s] Comparing powertop-debugsource-2.5-1.8.x86_64.rpm to powertop-debugsource-2.5-1.9.x86_64.rpm [ 39s] This is not a prerelease project. Compare the project name. [ 39s] comparing rpmtags [ 39s] comparing RELEASE [ 39s] comparing PROVIDES [ 39s] comparing scripts [ 39s] comparing filelist [ 39s] comparing file checksum [ 39s] creating rename script [ 39s] RPM meta information is identical [ 39s] compare /.build.oldpackages/powertop-docs-2.5-1.8.x86_64.rpm /home/abuild/rpmbuild/RPMS/x86_64/powertop-docs-2.5-1.9.x86_64.rpm [ 39s] Comparing powertop-docs-2.5-1.8.x86_64.rpm to powertop-docs-2.5-1.9.x86_64.rpm [ 39s] This is not a prerelease project. Compare the project name. [ 39s] comparing rpmtags [ 39s] comparing RELEASE [ 39s] comparing PROVIDES [ 39s] comparing scripts [ 39s] comparing filelist [ 39s] comparing file checksum [ 39s] creating rename script [ 39s] RPM meta information is identical [ 39s] compare /.build.oldpackages/powertop-locale-2.5-1.8.noarch.rpm /home/abuild/rpmbuild/RPMS/noarch/powertop-locale-2.5-1.9.noarch.rpm [ 39s] Comparing powertop-locale-2.5-1.8.noarch.rpm to powertop-locale-2.5-1.9.noarch.rpm [ 39s] This is not a prerelease project. Compare the project name. [ 39s] comparing rpmtags [ 39s] comparing RELEASE [ 39s] comparing PROVIDES [ 39s] comparing scripts [ 39s] comparing filelist [ 39s] comparing file checksum [ 39s] creating rename script [ 39s] RPM meta information is identical [ 39s] [ 39s] obsnw19 finished "build powertop.spec" at Fri May 17 01:01:09 UTC 2019. [ 39s]