[ 0s] Using BUILD_ROOT=/srv/build/root_2/.mount [ 0s] Using BUILD_ARCH=x86_64:i686:i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_2/root [ 0s] [ 0s] [ 0s] w32 started "build _service:gbs:dracut.spec" at Thu Jan 5 11:01:17 UTC 2017. [ 0s] [ 0s] Building dracut for project 'Tizen:3.0.M2:Common' repository 'x86_64-wayland' arch 'x86_64' srcmd5 'd90ce4eea70e0ccd7e14d78fa0d73d7c' [ 0s] [ 0s] processing specfile /srv/build/root_2/.build-srcdir/_service:gbs:dracut.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_2/.build-srcdir/_service:gbs:dracut.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_2/.build.rpmlist /srv/build/root_2/.build-srcdir/_service:gbs:dracut.spec build rpmlint-Factory ... [ 0s] Copying qemu-fix-build-hang.sh [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/35] preinstalling libmagic-data... [ 0s] [2/35] preinstalling setup... [ 1s] [3/35] preinstalling filesystem... [ 1s] [4/35] preinstalling glibc... [ 1s] [5/35] preinstalling bash... [ 1s] [6/35] preinstalling diffutils... [ 1s] [7/35] preinstalling grep... [ 1s] [8/35] preinstalling libattr... [ 1s] [9/35] preinstalling libbz2... [ 1s] [10/35] preinstalling libcap... [ 1s] [11/35] preinstalling libelf... [ 1s] [12/35] preinstalling libfreebl3... [ 1s] [13/35] preinstalling libgcc... [ 1s] [14/35] preinstalling liblua... [ 1s] [15/35] preinstalling liblzma... [ 1s] [16/35] preinstalling libncurses... [ 1s] [17/35] preinstalling libpopt... [ 1s] [18/35] preinstalling libsmack... [ 1s] [19/35] preinstalling libsqlite... [ 1s] [20/35] preinstalling nspr... [ 1s] [21/35] preinstalling sed... [ 1s] [22/35] preinstalling zlib... [ 1s] [23/35] preinstalling coreutils... [ 1s] [24/35] preinstalling libacl... [ 1s] [25/35] preinstalling libreadline... [ 1s] [26/35] preinstalling smack... [ 1s] [27/35] preinstalling bzip2... [ 1s] [28/35] preinstalling libmagic... [ 1s] [29/35] preinstalling libxml2... [ 1s] [30/35] preinstalling tar... [ 1s] [31/35] preinstalling util-linux... [ 2s] [32/35] preinstalling util-linux-su... [ 2s] [33/35] preinstalling nss... [ 2s] [34/35] preinstalling libsoftokn3... [ 2s] [35/35] preinstalling rpm... [ 3s] [ 3s] [1/9] preinstalling libext2fs... [ 3s] [2/9] preinstalling libpcre... [ 3s] [3/9] preinstalling libsmartcols... [ 3s] [4/9] preinstalling libuuid... [ 3s] [5/9] preinstalling perl... [ 4s] [6/9] preinstalling grep... [ 4s] [7/9] preinstalling libblkid... [ 4s] [8/9] preinstalling libmount... [ 4s] [9/9] preinstalling util-linux... [ 4s] copying packages... [ 5s] reordering...cycle: libsoftokn3 -> nss [ 5s] breaking dependency nss -> libsoftokn3 [ 5s] done [ 9s] booting kvm ... [ 9s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 6000 -drive file=/srv/build/root_2/root,if=virtio,cache=none -drive file=/srv/build/root_2/root,if=ide,index=0,cache=none -drive file=/srv/build/root_2/swap,if=virtio,cache=none -smp 4 [ 16s] [ 0.000000] tsc: Fast TSC calibration failed [ 16s] doing fast boot [ 17s] Creating device nodes with udev [ 21s] Waiting for device /dev/vda to appear: ok [ 21s] fsck from util-linux 2.21.2 [ 21s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 21s] /dev/vda: clean, 4389/2392064 files, 188944/9568256 blocks [ 21s] fsck succeeded. Mounting root device read-write. [ 21s] Mounting root /dev/vda [ 21s] mount -o rw -t ext4 /dev/vda /root [ 22s] replacing /etc/mtab with symlink to /proc/self/mounts [ 22s] 2nd stage started in virtual machine [ 22s] machine type: x86_64 [ 22s] swapon: /dev/vdb: found signature [pagesize=4096, signature=swap] [ 22s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 22s] swapon /dev/vdb [ 22s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 22s] mount: none is already mounted or /proc busy [ 22s] mount: none is already mounted or /dev/pts busy [ 22s] logging output to //.build.log... [ 22s] processing specfile /.build-srcdir/_service:gbs:dracut.spec ... [ 22s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:dracut.spec build rpmlint-Factory ... [ 22s] running setup postinstall script [ 22s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 22s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 22s] initializing rpm db... [ 22s] [1/116] installing libmagic-data-5.28-1.1 [ 22s] [2/116] installing setup-0.9-1.1 [ 22s] [3/116] installing terminfo-base-5.9-1.1 [ 22s] [4/116] installing filesystem-3.1-1.1 [ 22s] [5/116] installing glibc-2.20-1.1 [ 22s] [6/116] installing bash-3.2.57-1.1 [ 22s] [7/116] installing cpio-2.11-1.1 [ 22s] [8/116] installing diffutils-3.3-1.1 [ 22s] [9/116] installing findutils-4.3.8-1.1 [ 22s] [10/116] installing hostname-3.12-1.1 [ 22s] [11/116] installing libatomic-4.9.2-1.3 [ 22s] [12/116] installing libattr-2.4.47-1.1 [ 22s] [13/116] installing libbz2-1.0.6-1.6 [ 22s] [14/116] installing libcap-2.24-1.1 [ 22s] [15/116] installing libcares-1.12.0-1.1 [ 22s] [16/116] installing libelf-0.153-1.6 [ 22s] [17/116] installing libexpat-2.2.0-1.1 [ 22s] [18/116] installing libext2fs-1.42.13-1.1 [ 22s] [19/116] installing libfreebl3-3.23-1.6 [ 22s] [20/116] installing libgcc-4.9.2-1.3 [ 23s] [21/116] installing libgomp-4.9.2-1.3 [ 23s] [22/116] installing libgpg-error-1.13-1.6 [ 23s] [23/116] installing libidn-1.15-1.1 [ 23s] [24/116] installing libitm-4.9.2-1.3 [ 23s] [25/116] installing libltdl-2.4.2-1.1 [ 23s] [26/116] installing liblua-5.1.4-1.1 [ 23s] [27/116] installing liblzma-5.1.3-1.1 [ 23s] [28/116] installing libpcre-8.39-1.1 [ 23s] [29/116] installing libpopt-1.16-1.1 [ 23s] [30/116] installing libpython-2.7.8-1.3 [ 23s] [31/116] installing libsmack-1.3.0-1.1 [ 23s] [32/116] installing libsmartcols-2.28-1.1 [ 23s] [33/116] installing libsqlite-3.8.10.2-1.1 [ 23s] [34/116] installing libuuid-2.28-1.1 [ 23s] [35/116] installing m4-1.4.17-1.1 [ 23s] [36/116] installing net-tools-2.0_20121208git-1.1 [ 23s] [37/116] installing nghttp2-1.0.0-1.1 [ 23s] [38/116] installing nspr-4.12-1.1 [ 23s] [39/116] installing patch-2.7-1.1 [ 23s] [40/116] installing pkg-config-0.28-1.1 [ 23s] [41/116] installing sed-4.1c-1.1 [ 23s] [42/116] installing update-alternatives-1.16.3-1.1 [ 23s] [43/116] installing which-2.20-1.1 [ 23s] [44/116] installing zlib-1.2.8-1.1 [ 23s] [45/116] installing libncurses-5.9-1.1 [ 23s] [46/116] installing shadow-utils-4.1.4.2-1.1 [ 23s] [47/116] installing build-compare-2015.04.28-1.6 [ 23s] [48/116] installing coreutils-6.9-1.1 [ 24s] [49/116] installing cpp-4.9.2-1.3 [ 24s] [50/116] installing dash-0.5.7-1.1 [ 24s] [51/116] installing gawk-3.1.5-1.1 [ 24s] [52/116] installing gcc-c++-4.9.2-1.3 [ 25s] [53/116] installing grep-2.5.2-1.1 [ 25s] [54/116] installing less-466-1.1 [ 25s] [55/116] installing libacl-2.2.52-1.1 [ 25s] [56/116] installing libasm-0.153-1.6 [ 25s] [57/116] installing libblkid-2.28-1.1 [ 25s] [58/116] installing libgcrypt-1.7.1-1.1 [ 25s] [59/116] installing libopenssl-1.0.2j-1.1 [ 25s] [60/116] installing libreadline-5.2-1.1 [ 25s] [61/116] installing libstdc++-4.9.2-1.3 [ 25s] [62/116] installing make-4.0-1.1 [ 25s] [63/116] installing nss-certs-3.23-1.6 [ 25s] [64/116] installing smack-1.3.0-1.1 [ 25s] [65/116] installing binutils-2.25-1.3 [ 25s] [66/116] installing bzip2-1.0.6-1.6 [ 25s] [67/116] installing libmagic-5.28-1.1 [ 25s] [68/116] installing libxml2-2.9.4-1.1 [ 25s] [69/116] installing xz-5.1.3-1.1 [ 25s] [70/116] installing libdw-0.153-1.6 [ 25s] [71/116] installing libstdc++-devel-4.9.2-1.3 [ 26s] [72/116] installing file-5.28-1.1 [ 26s] [73/116] installing libmount-2.28-1.1 [ 26s] [74/116] installing linux-glibc-devel-3.10-1.1 [ 26s] [75/116] installing tar-1.17-1.1 [ 26s] [76/116] installing db4-4.8.30.NC-1.1 [ 26s] [77/116] installing glibc-locale-2.20-1.1 [ 26s] [78/116] installing gzip-1.3.12-1.1 [ 26s] [79/116] installing libcilkrts-4.9.2-1.3 [ 26s] [80/116] installing libfdisk1-2.28-1.1 [ 26s] [81/116] installing libubsan-4.9.2-1.3 [ 26s] [82/116] installing libxml2-tools-2.9.4-1.1 [ 26s] [83/116] installing pam-1.1.6-1.1 [ 26s] [84/116] installing rsync-3.1.1-1.1 [ 26s] [85/116] installing tzdata-2016i-1.1 [ 26s] [86/116] installing libcurl-7.50.2-1.1 [ 26s] [87/116] installing libxslt-1.1.29-1.1 [ 26s] [88/116] installing elfutils-0.153-1.6 [ 26s] [89/116] installing glibc-devel-2.20-1.1 [ 27s] [90/116] installing libxslt-tools-1.1.29-1.1 [ 27s] [91/116] installing pam-modules-extra-1.1.6-1.1 [ 27s] [92/116] installing perl-5.20.0-1.6 [ 29s] [93/116] installing sgml-skel-0.6-1.1 [ 29s] [94/116] installing gcc-4.9.2-1.3 [ 30s] [95/116] installing python-2.7.8-1.3 [ 31s] [96/116] installing util-linux-2.28-1.1 [ 32s] [97/116] installing build-mkbaselibs-20120927-1.1 [ 32s] [98/116] installing perl-Error-0.17017-1.1 [ 32s] [99/116] installing iso_ent-2000.11.03-2.1 [ 33s] [100/116] installing autoconf-2.69-1.1 [ 33s] [101/116] installing python-xml-2.7.8-1.3 [ 34s] [102/116] installing util-linux-su-2.28-1.1 [ 34s] [103/116] installing xmlcharent-0.3-1.1 [ 34s] [104/116] installing openssh-6.6p1-1.1 [ 35s] Usage: groupadd [options] GROUP [ 35s] [ 35s] Options: [ 35s] -f, --force exit successfully if the group already exists, [ 35s] and cancel -g if the GID is already used [ 35s] -g, --gid GID use GID for the new group [ 35s] -h, --help display this help message and exit [ 35s] -K, --key KEY=VALUE override /etc/login.defs defaults [ 35s] -o, --non-unique allow to create groups with duplicate [ 35s] (non-unique) GID [ 35s] -p, --password PASSWORD use this encrypted password for the new group [ 35s] -r, --system create a system account [ 35s] [ 35s] [105/116] installing automake-1.14.1-1.1 [ 35s] [106/116] installing build-20120927-1.1 [ 35s] [107/116] installing docbook_4-4.5-1.1 [ 35s] [108/116] installing git-core-2.0.1-1.1 [ 37s] [109/116] installing git-2.0.1-1.1 [ 37s] [110/116] installing libtool-2.4.2-1.1 [ 38s] [111/116] installing docbook-xsl-stylesheets-1.78.1-1.1 [ 38s] [112/116] installing asciidoc-8.6.6-1.1 [ 39s] [113/116] installing nss-3.23-1.6 [ 39s] [114/116] installing libsoftokn3-3.23-1.6 [ 39s] [115/116] installing rpm-4.11.0.1-1.1 [ 40s] [116/116] installing rpm-build-4.11.0.1-1.1 [ 40s] removing nis flags from //etc/nsswitch.conf... [ 40s] now finalizing build dir... [ 44s] ----------------------------------------------------------------- [ 44s] I have the following modifications for dracut.spec: [ 44s] 9c9 [ 44s] < Release: 0 [ 44s] --- [ 44s] > Release: 1.1 [ 44s] 256a257 [ 44s] > %changelog [ 44s] ----------------------------------------------------------------- [ 44s] ----- building dracut.spec (user abuild) [ 44s] ----------------------------------------------------------------- [ 44s] ----------------------------------------------------------------- [ 44s] Running qemu build hang workaround... [ 44s] /bin/ps command not found [ 44s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0.M2:Common/x86_64-wayland/d90ce4eea70e0ccd7e14d78fa0d73d7c-dracut' /home/abuild/rpmbuild/SOURCES/dracut.spec [ 44s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.zj3O2k [ 44s] + umask 022 [ 44s] + cd /home/abuild/rpmbuild/BUILD [ 44s] + cd /home/abuild/rpmbuild/BUILD [ 44s] + rm -rf dracut-032 [ 44s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/dracut-032.tar.xz [ 44s] + /bin/tar -xf - [ 44s] + STATUS=0 [ 44s] + '[' 0 -ne 0 ']' [ 44s] + cd dracut-032 [ 44s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 44s] + echo 'Patch #0 (0001-modify-ln-relative-with-cd-ln.patch):' [ 44s] Patch #0 (0001-modify-ln-relative-with-cd-ln.patch): [ 44s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0001-modify-ln-relative-with-cd-ln.patch [ 44s] + /bin/patch -p1 --fuzz=2 [ 44s] patching file Makefile [ 44s] + cp /home/abuild/rpmbuild/SOURCES/dracut.manifest . [ 44s] + exit 0 [ 44s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.Bwzqqt [ 44s] + umask 022 [ 44s] + cd /home/abuild/rpmbuild/BUILD [ 44s] + cd dracut-032 [ 44s] ++ uname -m [ 44s] + [[ x86_64 == \a\a\r\c\h\6\4 ]] [ 44s] + LANG=C [ 44s] + export LANG [ 44s] + unset DISPLAY [ 44s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=corei7 -msse4.2 -mtune=corei7-avx -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 44s] + export CFLAGS [ 44s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=corei7 -msse4.2 -mtune=corei7-avx -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 44s] + export CXXFLAGS [ 44s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=corei7 -msse4.2 -mtune=corei7-avx -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I%_fmoddir' [ 44s] + export FFLAGS [ 44s] + LDFLAGS= [ 44s] + export LDFLAGS [ 44s] + LD_AS_NEEDED=1 [ 44s] + export LD_AS_NEEDED [ 44s] + make all [ 44s] cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=corei7 -msse4.2 -mtune=corei7-avx -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/dracut-install.o install/dracut-install.c [ 44s] install/dracut-install.c: In function 'resolve_deps': [ 44s] install/dracut-install.c:338:17: warning: ignoring return value of 'read', declared with attribute warn_unused_result [-Wunused-result] [ 44s] read(fd, buf, LINE_MAX); [ 44s] ^ [ 44s] install/dracut-install.c: In function 'cp': [ 44s] install/dracut-install.c:223:33: warning: ignoring return value of 'fchown', declared with attribute warn_unused_result [-Wunused-result] [ 44s] fchown(dest_desc, (__uid_t)-1, sb.st_gid); [ 44s] ^ [ 44s] cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=corei7 -msse4.2 -mtune=corei7-avx -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/hashmap.o install/hashmap.c [ 45s] cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=corei7 -msse4.2 -mtune=corei7-avx -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/log.o install/log.c [ 45s] cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=corei7 -msse4.2 -mtune=corei7-avx -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/util.o install/util.c [ 45s] cc install/dracut-install.o install/hashmap.o install/log.o install/util.o -o install/dracut-install [ 46s] ln -fs install/dracut-install dracut-install [ 46s] asciidoc -d manpage -b docbook -o lsinitrd.1.xml lsinitrd.1.asc [ 46s] xsltproc -o lsinitrd.1 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl lsinitrd.1.xml [ 46s] Note: Writing lsinitrd.1 [ 46s] asciidoc -d manpage -b docbook -o dracut.conf.5.xml dracut.conf.5.asc [ 47s] xsltproc -o dracut.conf.5 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.conf.5.xml [ 47s] Note: Writing dracut.conf.5 [ 47s] asciidoc -d manpage -b docbook -o dracut.cmdline.7.xml dracut.cmdline.7.asc [ 48s] xsltproc -o dracut.cmdline.7 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.cmdline.7.xml [ 49s] Note: Writing dracut.cmdline.7 [ 49s] asciidoc -d manpage -b docbook -o dracut.bootup.7.xml dracut.bootup.7.asc [ 49s] xsltproc -o dracut.bootup.7 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.bootup.7.xml [ 49s] Note: Writing dracut.bootup.7 [ 49s] asciidoc -d manpage -b docbook -o dracut.8.xml dracut.8.asc [ 50s] xsltproc -o dracut.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.8.xml [ 50s] Note: Writing dracut.8 [ 50s] asciidoc -d manpage -b docbook -o dracut-catimages.8.xml dracut-catimages.8.asc [ 51s] xsltproc -o dracut-catimages.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut-catimages.8.xml [ 51s] Note: Writing dracut-catimages.8 [ 51s] asciidoc -d manpage -b docbook -o mkinitrd.8.xml mkinitrd.8.asc [ 51s] xsltproc -o mkinitrd.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl mkinitrd.8.xml [ 51s] Note: Writing mkinitrd.8 [ 51s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-cmdline.service.8.xml modules.d/98systemd/dracut-cmdline.service.8.asc [ 52s] xsltproc -o modules.d/98systemd/dracut-cmdline.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-cmdline.service.8.xml [ 52s] Note: Writing dracut-cmdline.service.8 [ 52s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-initqueue.service.8.xml modules.d/98systemd/dracut-initqueue.service.8.asc [ 52s] xsltproc -o modules.d/98systemd/dracut-initqueue.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-initqueue.service.8.xml [ 52s] Note: Writing dracut-initqueue.service.8 [ 52s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-mount.service.8.xml modules.d/98systemd/dracut-mount.service.8.asc [ 53s] xsltproc -o modules.d/98systemd/dracut-mount.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-mount.service.8.xml [ 53s] Note: Writing dracut-mount.service.8 [ 53s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-shutdown.service.8.xml modules.d/98systemd/dracut-shutdown.service.8.asc [ 53s] xsltproc -o modules.d/98systemd/dracut-shutdown.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-shutdown.service.8.xml [ 53s] Note: Writing dracut-shutdown.service.8 [ 53s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-mount.service.8.xml modules.d/98systemd/dracut-pre-mount.service.8.asc [ 54s] xsltproc -o modules.d/98systemd/dracut-pre-mount.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-mount.service.8.xml [ 54s] Note: Writing dracut-pre-mount.service.8 [ 54s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-pivot.service.8.xml modules.d/98systemd/dracut-pre-pivot.service.8.asc [ 54s] xsltproc -o modules.d/98systemd/dracut-pre-pivot.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-pivot.service.8.xml [ 54s] Note: Writing dracut-pre-pivot.service.8 [ 54s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-trigger.service.8.xml modules.d/98systemd/dracut-pre-trigger.service.8.asc [ 55s] xsltproc -o modules.d/98systemd/dracut-pre-trigger.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-trigger.service.8.xml [ 55s] Note: Writing dracut-pre-trigger.service.8 [ 55s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-udev.service.8.xml modules.d/98systemd/dracut-pre-udev.service.8.asc [ 55s] xsltproc -o modules.d/98systemd/dracut-pre-udev.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-udev.service.8.xml [ 55s] Note: Writing dracut-pre-udev.service.8 [ 55s] asciidoc -a numbered -d book -b docbook -o dracut.xml dracut.asc [ 59s] xsltproc -o dracut.html --xinclude -nonet \ [ 59s] --stringparam html.stylesheet \ [ 59s] http://docs.fedoraproject.org/en-US/Common_Content/css/default.css \ [ 59s] http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl dracut.xml [ 59s] rm -f -- dracut.xml [ 59s] rm modules.d/98systemd/dracut-mount.service.8.xml dracut.8.xml dracut.cmdline.7.xml modules.d/98systemd/dracut-pre-mount.service.8.xml dracut.bootup.7.xml modules.d/98systemd/dracut-initqueue.service.8.xml modules.d/98systemd/dracut-pre-pivot.service.8.xml mkinitrd.8.xml modules.d/98systemd/dracut-cmdline.service.8.xml dracut.conf.5.xml lsinitrd.1.xml modules.d/98systemd/dracut-pre-udev.service.8.xml dracut-catimages.8.xml modules.d/98systemd/dracut-pre-trigger.service.8.xml modules.d/98systemd/dracut-shutdown.service.8.xml [ 59s] + exit 0 [ 59s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.cR9Qhx [ 59s] + umask 022 [ 59s] + cd /home/abuild/rpmbuild/BUILD [ 59s] + cd dracut-032 [ 59s] + LANG=C [ 59s] + export LANG [ 59s] + unset DISPLAY [ 59s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64 [ 59s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64 [ 59s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64 libdir=/usr/lib bindir=/usr/bin systemdsystemunitdir=/usr/lib/systemd/system sysconfdir=/etc mandir=/usr/share/man [ 59s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/lib/dracut [ 59s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/bin [ 59s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/etc [ 59s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/lib/dracut/modules.d [ 59s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/share/man/man1 /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/share/man/man5 /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/share/man/man7 /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/share/man/man8 [ 59s] install -m 0755 dracut.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/bin/dracut [ 59s] install -m 0755 dracut-catimages.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/bin/dracut-catimages [ 59s] install -m 0755 mkinitrd-dracut.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/bin/mkinitrd [ 59s] install -m 0755 lsinitrd.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/bin/lsinitrd [ 59s] install -m 0644 dracut.conf /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/etc/dracut.conf [ 59s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/etc/dracut.conf.d [ 59s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/lib/dracut/dracut.conf.d [ 59s] install -m 0755 dracut-functions.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/lib/dracut/dracut-functions.sh [ 59s] install -m 0755 dracut-version.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/lib/dracut/dracut-version.sh [ 59s] ln -fs dracut-functions.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/lib/dracut/dracut-functions [ 59s] install -m 0755 dracut-logger.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/lib/dracut/dracut-logger.sh [ 59s] install -m 0755 dracut-initramfs-restore.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/lib/dracut/dracut-initramfs-restore [ 59s] cp -arx modules.d /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/lib/dracut [ 59s] for i in lsinitrd.1; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/share/man/man1/${i##*/}; done [ 59s] for i in dracut.conf.5; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/share/man/man5/${i##*/}; done [ 59s] for i in dracut.cmdline.7 dracut.bootup.7; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/share/man/man7/${i##*/}; done [ 59s] for i in dracut.8 dracut-catimages.8 mkinitrd.8 modules.d/98systemd/dracut-cmdline.service.8 modules.d/98systemd/dracut-initqueue.service.8 modules.d/98systemd/dracut-mount.service.8 modules.d/98systemd/dracut-shutdown.service.8 modules.d/98systemd/dracut-pre-mount.service.8 modules.d/98systemd/dracut-pre-pivot.service.8 modules.d/98systemd/dracut-pre-trigger.service.8 modules.d/98systemd/dracut-pre-udev.service.8; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/share/man/man8/${i##*/}; done [ 59s] ln -fs dracut.cmdline.7 /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/share/man/man7/dracut.kernel.7 [ 59s] if [ -n "/usr/lib/systemd/system" ]; then \ [ 59s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/lib/systemd/system; \ [ 59s] cd /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64 && ln -sf .//usr/lib/dracut/modules.d/98systemd/dracut-shutdown.service .//usr/lib/systemd/system/dracut-shutdown.service && cd - ; \ [ 59s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/lib/systemd/system/shutdown.target.wants; \ [ 59s] ln -s ../dracut-shutdown.service \ [ 59s] /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/lib/systemd/system/shutdown.target.wants/dracut-shutdown.service; \ [ 59s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/lib/systemd/system/initrd.target.wants; \ [ 59s] for i in \ [ 59s] dracut-cmdline.service \ [ 59s] dracut-initqueue.service \ [ 59s] dracut-mount.service \ [ 59s] dracut-pre-mount.service \ [ 59s] dracut-pre-pivot.service \ [ 59s] dracut-pre-trigger.service \ [ 59s] dracut-pre-udev.service \ [ 59s] ; do \ [ 59s] cd /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64 && ln -sf .//usr/lib/dracut/modules.d/98systemd/$i .//usr/lib/systemd/system && cd -; \ [ 59s] ln -s ../$i \ [ 59s] /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/lib/systemd/system/initrd.target.wants/$i; \ [ 59s] done \ [ 59s] fi [ 59s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 59s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 59s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 59s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 59s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 59s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 59s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 59s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 59s] if [ -f install/dracut-install ]; then \ [ 59s] install -m 0755 install/dracut-install /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/lib/dracut/dracut-install; \ [ 59s] fi [ 59s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/lib/kernel/install.d [ 59s] install -m 0755 50-dracut.install /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/lib/kernel/install.d/50-dracut.install [ 59s] install -m 0755 51-dracut-rescue.install /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/lib/kernel/install.d/51-dracut-rescue.install [ 59s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/share/bash-completion/completions [ 59s] install -m 0644 dracut-bash-completion.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/share/bash-completion/completions/dracut [ 59s] install -m 0644 lsinitrd-bash-completion.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/share/bash-completion/completions/lsinitrd [ 59s] + echo DRACUT_VERSION=032-1.1 [ 59s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64//usr/lib/dracut/modules.d/01fips [ 59s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64//usr/lib/dracut/modules.d/02fips-aesni [ 59s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64//usr/lib/dracut/modules.d/50gensplash [ 59s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64//usr/lib/dracut/modules.d/96securityfs [ 59s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64//usr/lib/dracut/modules.d/97masterkey [ 59s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64//usr/lib/dracut/modules.d/98integrity [ 59s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64//usr/lib/dracut/modules.d/98selinux [ 59s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/boot/dracut [ 59s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/var/lib/dracut/overlay [ 59s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/var/log [ 59s] + touch /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/var/log/dracut.log [ 59s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/com/initramfs [ 59s] + install -m 0644 dracut.conf.d/suse.conf.example /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/etc/dracut.conf.d/01-dist.conf [ 59s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/etc/logrotate.d [ 59s] + install -m 0644 dracut.logrotate /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/etc/logrotate.d/dracut_log [ 59s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/dracut-032 [ 59s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/lib/dracut/dracut-install [ 60s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 60s] cpio: glibc-2.20/csu/init.c: Cannot stat: No such file or directory [ 60s] cpio: glibc-2.20/sysdeps/x86_64/crti.S: Cannot stat: No such file or directory [ 60s] cpio: glibc-2.20/sysdeps/x86_64/crtn.S: Cannot stat: No such file or directory [ 60s] cpio: glibc-2.20/sysdeps/x86_64/start.S: Cannot stat: No such file or directory [ 60s] 195 blocks [ 60s] + /usr/lib/rpm/check-buildroot [ 60s] + /usr/lib/rpm//brp-compress [ 60s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 60s] + /usr/lib/rpm/brp-python-hardlink [ 60s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64 [ 60s] Processing files: dracut-032-1.1.x86_64 [ 60s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 60s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 60s] [ 60s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.Qgk5GF [ 60s] + umask 022 [ 60s] + cd /home/abuild/rpmbuild/BUILD [ 60s] + cd dracut-032 [ 60s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/share/licenses/dracut [ 60s] + export LICENSEDIR [ 60s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/share/licenses/dracut [ 60s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64/usr/share/licenses/dracut [ 60s] + exit 0 [ 61s] Provides: config(dracut) = 032-1.1 dracut = 032-1.1 dracut(x86-64) = 032-1.1 [ 61s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 61s] Requires: /bin/bash /bin/sh libc.so.6()(64bit) libc.so.6(GLIBC_2.14)(64bit) libc.so.6(GLIBC_2.2.5)(64bit) libc.so.6(GLIBC_2.3)(64bit) libc.so.6(GLIBC_2.3.4)(64bit) libc.so.6(GLIBC_2.4)(64bit) libc.so.6(GLIBC_2.7)(64bit) libc.so.6(GLIBC_2.8)(64bit) libgcc_s.so.1()(64bit) libgcc_s.so.1(GCC_3.0)(64bit) libgcc_s.so.1(GCC_3.3.1)(64bit) [ 61s] Conflicts: systemd < 187 [ 61s] Processing files: dracut-debugsource-032-1.1.x86_64 [ 61s] Provides: dracut-debugsource = 032-1.1 dracut-debugsource(x86-64) = 032-1.1 [ 61s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 61s] Processing files: dracut-network-032-1.1.x86_64 [ 61s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 61s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 61s] [ 61s] Provides: dracut-network = 032-1.1 dracut-network(x86-64) = 032-1.1 [ 61s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 61s] Requires: /bin/bash /bin/sh [ 61s] Processing files: dracut-caps-032-1.1.x86_64 [ 61s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 61s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 61s] [ 61s] Provides: dracut-caps = 032-1.1 dracut-caps(x86-64) = 032-1.1 [ 61s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 61s] Requires: /bin/bash [ 61s] Processing files: dracut-tools-032-1.1.x86_64 [ 61s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 61s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 61s] [ 61s] Provides: dracut-tools = 032-1.1 dracut-tools(x86-64) = 032-1.1 [ 61s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 61s] Requires: /bin/bash [ 61s] Processing files: dracut-debuginfo-032-1.1.x86_64 [ 61s] Provides: dracut-debuginfo = 032-1.1 dracut-debuginfo(x86-64) = 032-1.1 [ 61s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 61s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64 [ 61s] Wrote: /home/abuild/rpmbuild/SRPMS/dracut-032-1.1.src.rpm [ 62s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/dracut-032-1.1.x86_64.rpm [ 62s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/dracut-debugsource-032-1.1.x86_64.rpm [ 62s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/dracut-network-032-1.1.x86_64.rpm [ 62s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/dracut-caps-032-1.1.x86_64.rpm [ 62s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/dracut-tools-032-1.1.x86_64.rpm [ 62s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/dracut-debuginfo-032-1.1.x86_64.rpm [ 62s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.OpDVDg [ 62s] + umask 022 [ 62s] + cd /home/abuild/rpmbuild/BUILD [ 62s] + cd dracut-032 [ 62s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.1.x86_64 [ 62s] + exit 0 [ 62s] ... checking for files with abuild user/group [ 62s] ... creating baselibs [ 62s] ... saving built statistics [ 62s] ... saving built packages [ 62s] /home/abuild/rpmbuild/RPMS/x86_64/dracut-032-1.1.x86_64.rpm [ 62s] /home/abuild/rpmbuild/RPMS/x86_64/dracut-caps-032-1.1.x86_64.rpm [ 62s] /home/abuild/rpmbuild/RPMS/x86_64/dracut-debuginfo-032-1.1.x86_64.rpm [ 62s] /home/abuild/rpmbuild/RPMS/x86_64/dracut-debugsource-032-1.1.x86_64.rpm [ 62s] /home/abuild/rpmbuild/RPMS/x86_64/dracut-network-032-1.1.x86_64.rpm [ 62s] /home/abuild/rpmbuild/RPMS/x86_64/dracut-tools-032-1.1.x86_64.rpm [ 62s] /home/abuild/rpmbuild/SRPMS/dracut-032-1.1.src.rpm [ 62s] /home/abuild/rpmbuild/OTHER/_statistics [ 62s] [ 62s] w32 finished "build dracut.spec" at Thu Jan 5 11:02:18 UTC 2017. [ 62s] [ 65s] [ 49.029857] SysRq : Power Off [ 65s] [ 49.037122] Power down. [ 65s] build: extracting built packages... [ 65s] dracut-032-1.1.x86_64.rpm [ 65s] dracut-caps-032-1.1.x86_64.rpm [ 65s] dracut-debuginfo-032-1.1.x86_64.rpm [ 65s] dracut-debugsource-032-1.1.x86_64.rpm [ 65s] dracut-network-032-1.1.x86_64.rpm [ 65s] dracut-tools-032-1.1.x86_64.rpm [ 65s] dracut-032-1.1.src.rpm [ 65s] _statistics