[ 0s] Using BUILD_ROOT=/srv/build/root_3/.mount [ 0s] Using BUILD_ARCH=x86_64:i686:i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_3/root [ 0s] [ 0s] [ 0s] w06 started "build _service:gbs:tizen-debug.spec" at Thu Jan 5 10:48:15 UTC 2017. [ 0s] [ 0s] Building tizen-debug for project 'Tizen:3.0.M2:Common' repository 'x86_64-wayland' arch 'x86_64' srcmd5 '8dda1158c62202955b696f5efd44e2db' [ 0s] [ 0s] processing specfile /srv/build/root_3/.build-srcdir/_service:gbs:tizen-debug.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_3/.build-srcdir/_service:gbs:tizen-debug.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/3/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_3/.build.rpmlist /srv/build/root_3/.build-srcdir/_service:gbs:tizen-debug.spec build rpmlint-Factory ... [ 0s] Copying qemu-fix-build-hang.sh [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/35] preinstalling libmagic-data... [ 0s] [2/35] preinstalling setup... [ 0s] [3/35] preinstalling filesystem... [ 0s] [4/35] preinstalling glibc... [ 0s] [5/35] preinstalling bash... [ 0s] [6/35] preinstalling diffutils... [ 0s] [7/35] preinstalling grep... [ 0s] [8/35] preinstalling libattr... [ 0s] [9/35] preinstalling libbz2... [ 1s] [10/35] preinstalling libcap... [ 1s] [11/35] preinstalling libelf... [ 1s] [12/35] preinstalling libfreebl3... [ 1s] [13/35] preinstalling libgcc... [ 1s] [14/35] preinstalling liblua... [ 1s] [15/35] preinstalling liblzma... [ 1s] [16/35] preinstalling libncurses... [ 1s] [17/35] preinstalling libpopt... [ 1s] [18/35] preinstalling libsmack... [ 1s] [19/35] preinstalling libsqlite... [ 1s] [20/35] preinstalling nspr... [ 1s] [21/35] preinstalling sed... [ 1s] [22/35] preinstalling zlib... [ 1s] [23/35] preinstalling coreutils... [ 1s] [24/35] preinstalling libacl... [ 1s] [25/35] preinstalling libreadline... [ 1s] [26/35] preinstalling smack... [ 1s] [27/35] preinstalling bzip2... [ 1s] [28/35] preinstalling libmagic... [ 1s] [29/35] preinstalling libxml2... [ 1s] [30/35] preinstalling tar... [ 1s] [31/35] preinstalling util-linux... [ 2s] [32/35] preinstalling util-linux-su... [ 2s] [33/35] preinstalling nss... [ 2s] [34/35] preinstalling libsoftokn3... [ 2s] [35/35] preinstalling rpm... [ 2s] [ 2s] [1/9] preinstalling libext2fs... [ 2s] [2/9] preinstalling libpcre... [ 2s] [3/9] preinstalling libsmartcols... [ 2s] [4/9] preinstalling libuuid... [ 2s] [5/9] preinstalling perl... [ 3s] [6/9] preinstalling grep... [ 3s] [7/9] preinstalling libblkid... [ 3s] [8/9] preinstalling libmount... [ 3s] [9/9] preinstalling util-linux... [ 3s] copying packages... [ 4s] reordering...cycle: libsoftokn3 -> nss [ 4s] breaking dependency nss -> libsoftokn3 [ 4s] done [ 4s] booting kvm ... [ 4s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 16000 -drive file=/srv/build/root_3/root,if=virtio,cache=none -drive file=/srv/build/root_3/root,if=ide,index=0,cache=none -drive file=/srv/build/root_3/swap,if=virtio,cache=none -smp 8 [ 11s] doing fast boot [ 11s] Creating device nodes with udev [ 11s] Waiting for device /dev/vda to appear: ok [ 11s] fsck from util-linux 2.21.2 [ 11s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 11s] /dev/vda: clean, 4331/4194304 files, 299330/16777216 blocks [ 11s] fsck succeeded. Mounting root device read-write. [ 11s] Mounting root /dev/vda [ 11s] mount -o rw -t ext4 /dev/vda /root [ 11s] replacing /etc/mtab with symlink to /proc/self/mounts [ 11s] 2nd stage started in virtual machine [ 11s] machine type: x86_64 [ 11s] swapon: /dev/vdb: found signature [pagesize=4096, signature=swap] [ 11s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 11s] swapon /dev/vdb [ 11s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 11s] mount: none is already mounted or /proc busy [ 11s] mount: none is already mounted or /dev/pts busy [ 11s] logging output to //.build.log... [ 11s] processing specfile /.build-srcdir/_service:gbs:tizen-debug.spec ... [ 11s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:tizen-debug.spec build rpmlint-Factory ... [ 11s] running setup postinstall script [ 11s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 11s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 11s] initializing rpm db... [ 12s] [1/89] installing glibc-debuginfo-2.20-1.1 [ 12s] [2/89] installing libmagic-data-5.28-1.1 [ 12s] [3/89] installing setup-0.9-1.1 [ 12s] [4/89] installing terminfo-base-5.9-1.1 [ 12s] [5/89] installing filesystem-3.1-1.1 [ 12s] [6/89] installing glibc-2.20-1.1 [ 13s] [7/89] installing bash-3.2.57-1.1 [ 13s] [8/89] installing cpio-2.11-1.1 [ 13s] [9/89] installing diffutils-3.3-1.1 [ 13s] [10/89] installing findutils-4.3.8-1.1 [ 13s] [11/89] installing hostname-3.12-1.1 [ 13s] [12/89] installing libatomic-4.9.2-1.3 [ 13s] [13/89] installing libattr-2.4.47-1.1 [ 13s] [14/89] installing libbz2-1.0.6-1.6 [ 13s] [15/89] installing libcap-2.24-1.1 [ 13s] [16/89] installing libelf-0.153-1.6 [ 13s] [17/89] installing libext2fs-1.42.13-1.1 [ 13s] [18/89] installing libfreebl3-3.23-1.6 [ 13s] [19/89] installing libgcc-4.9.2-1.3 [ 13s] [20/89] installing libgomp-4.9.2-1.3 [ 13s] [21/89] installing libitm-4.9.2-1.3 [ 13s] [22/89] installing libltdl-2.4.2-1.1 [ 13s] [23/89] installing liblua-5.1.4-1.1 [ 13s] [24/89] installing liblzma-5.1.3-1.1 [ 13s] [25/89] installing libpcre-8.39-1.1 [ 13s] [26/89] installing libpopt-1.16-1.1 [ 13s] [27/89] installing libsmack-1.3.0-1.1 [ 13s] [28/89] installing libsmartcols-2.28-1.1 [ 13s] [29/89] installing libsqlite-3.8.10.2-1.1 [ 14s] [30/89] installing libuuid-2.28-1.1 [ 14s] [31/89] installing m4-1.4.17-1.1 [ 14s] [32/89] installing net-tools-2.0_20121208git-1.1 [ 14s] [33/89] installing nspr-4.12-1.1 [ 14s] [34/89] installing patch-2.7-1.1 [ 14s] [35/89] installing pkg-config-0.28-1.1 [ 14s] [36/89] installing sed-4.1c-1.1 [ 14s] [37/89] installing update-alternatives-1.16.3-1.1 [ 14s] [38/89] installing which-2.20-1.1 [ 14s] [39/89] installing zlib-1.2.8-1.1 [ 14s] [40/89] installing libncurses-5.9-1.1 [ 14s] [41/89] installing build-compare-2015.04.28-1.6 [ 14s] [42/89] installing coreutils-6.9-1.1 [ 14s] [43/89] installing cpp-4.9.2-1.3 [ 15s] [44/89] installing gawk-3.1.5-1.1 [ 15s] [45/89] installing gcc-c++-4.9.2-1.3 [ 16s] [46/89] installing grep-2.5.2-1.1 [ 16s] [47/89] installing less-466-1.1 [ 16s] [48/89] installing libacl-2.2.52-1.1 [ 16s] [49/89] installing libasm-0.153-1.6 [ 16s] [50/89] installing libblkid-2.28-1.1 [ 16s] [51/89] installing libreadline-5.2-1.1 [ 16s] [52/89] installing libstdc++-4.9.2-1.3 [ 16s] [53/89] installing make-4.0-1.1 [ 16s] [54/89] installing nss-certs-3.23-1.6 [ 16s] [55/89] installing smack-1.3.0-1.1 [ 16s] [56/89] installing binutils-2.25-1.3 [ 17s] [57/89] installing bzip2-1.0.6-1.6 [ 17s] [58/89] installing libmagic-5.28-1.1 [ 17s] [59/89] installing libxml2-2.9.4-1.1 [ 17s] [60/89] installing xz-5.1.3-1.1 [ 17s] [61/89] installing libdw-0.153-1.6 [ 17s] [62/89] installing libstdc++-devel-4.9.2-1.3 [ 17s] [63/89] installing file-5.28-1.1 [ 17s] [64/89] installing libmount-2.28-1.1 [ 17s] [65/89] installing linux-glibc-devel-3.10-1.1 [ 17s] [66/89] installing tar-1.17-1.1 [ 17s] [67/89] installing db4-4.8.30.NC-1.1 [ 18s] [68/89] installing glibc-locale-2.20-1.1 [ 18s] [69/89] installing gzip-1.3.12-1.1 [ 18s] [70/89] installing libcilkrts-4.9.2-1.3 [ 18s] [71/89] installing libfdisk1-2.28-1.1 [ 18s] [72/89] installing libubsan-4.9.2-1.3 [ 18s] [73/89] installing pam-1.1.6-1.1 [ 18s] [74/89] installing tzdata-2016i-1.1 [ 18s] [75/89] installing elfutils-0.153-1.6 [ 18s] [76/89] installing glibc-devel-2.20-1.1 [ 18s] [77/89] installing perl-5.20.0-1.6 [ 20s] [78/89] installing gcc-4.9.2-1.3 [ 21s] [79/89] installing util-linux-2.28-1.1 [ 21s] [80/89] installing build-mkbaselibs-20120927-1.1 [ 21s] [81/89] installing autoconf-2.69-1.1 [ 21s] [82/89] installing util-linux-su-2.28-1.1 [ 21s] [83/89] installing automake-1.14.1-1.1 [ 22s] [84/89] installing build-20120927-1.1 [ 22s] [85/89] installing libtool-2.4.2-1.1 [ 22s] [86/89] installing nss-3.23-1.6 [ 22s] [87/89] installing libsoftokn3-3.23-1.6 [ 22s] [88/89] installing rpm-4.11.0.1-1.1 [ 22s] [89/89] installing rpm-build-4.11.0.1-1.1 [ 22s] removing nis flags from //etc/nsswitch.conf... [ 22s] now finalizing build dir... [ 23s] ----------------------------------------------------------------- [ 23s] I have the following modifications for tizen-debug.spec: [ 23s] 8c8 [ 23s] < Release: 1 [ 23s] --- [ 23s] > Release: 1.1 [ 23s] ----------------------------------------------------------------- [ 23s] ----- building tizen-debug.spec (user abuild) [ 23s] ----------------------------------------------------------------- [ 23s] ----------------------------------------------------------------- [ 23s] Running qemu build hang workaround... [ 23s] /bin/ps command not found [ 23s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0.M2:Common/x86_64-wayland/8dda1158c62202955b696f5efd44e2db-tizen-debug' /home/abuild/rpmbuild/SOURCES/tizen-debug.spec [ 23s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.oNPwM9 [ 23s] + umask 022 [ 23s] + cd /home/abuild/rpmbuild/BUILD [ 23s] + cd /home/abuild/rpmbuild/BUILD [ 23s] + rm -rf tizen-debug-2.20 [ 23s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/tizen-debug-2.20.tar.gz [ 23s] + /bin/tar -xf - [ 23s] + STATUS=0 [ 23s] + '[' 0 -ne 0 ']' [ 23s] + cd tizen-debug-2.20 [ 23s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 23s] + exit 0 [ 23s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.O0u1E4 [ 23s] + umask 022 [ 23s] + cd /home/abuild/rpmbuild/BUILD [ 23s] + cd tizen-debug-2.20 [ 23s] + LANG=C [ 23s] + export LANG [ 23s] + unset DISPLAY [ 23s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.1.x86_64 [ 23s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.1.x86_64 [ 23s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.1.x86_64//usr/lib/debug/lib64 [ 23s] + objcopy -j .note.gnu.build-id -j .debug_frame /usr/lib/debug/lib64/libc-2.20-2014.11.so.debug /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.1.x86_64/usr/lib/debug/lib64/libc-2.20-2014.11.so.debug [ 23s] BFD: /usr/lib/debug/lib64/libc-2.20-2014.11.so.debug: warning: Empty loadable segment detected, is this intentional ? [ 23s] [ 23s] + cp /usr/lib/debug/lib64/ld-2.20-2014.11.so.debug /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.1.x86_64/usr/lib/debug/lib64/ld-2.20-2014.11.so.debug [ 23s] + chmod 444 /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.1.x86_64/usr/lib/debug/lib64/ld-2.20-2014.11.so.debug /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.1.x86_64/usr/lib/debug/lib64/libc-2.20-2014.11.so.debug [ 23s] + for file in /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.1.x86_64/usr/lib/debug/lib64/ld-2.20-2014.11.so.debug /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.1.x86_64/usr/lib/debug/lib64/libc-2.20-2014.11.so.debug [ 23s] ++ grep 'Build ID' [ 23s] ++ awk '{print $3}' [ 23s] ++ readelf -n /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.1.x86_64/usr/lib/debug/lib64/ld-2.20-2014.11.so.debug [ 23s] + BuildID=a2b4c16fb5067f5118c9d66ebcba2bb3a0b8e43a [ 23s] ++ echo a2b4c16fb5067f5118c9d66ebcba2bb3a0b8e43a [ 23s] ++ cut -b-2 [ 23s] + Dir=a2 [ 23s] ++ echo a2b4c16fb5067f5118c9d66ebcba2bb3a0b8e43a [ 23s] ++ cut -b3- [ 23s] + File=b4c16fb5067f5118c9d66ebcba2bb3a0b8e43a [ 23s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.1.x86_64/usr/lib/debug/.build-id/a2 [ 23s] + cp -d /usr/lib/debug/.build-id/a2/b4c16fb5067f5118c9d66ebcba2bb3a0b8e43a.debug /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.1.x86_64/usr/lib/debug/.build-id/a2 [ 23s] + for file in /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.1.x86_64/usr/lib/debug/lib64/ld-2.20-2014.11.so.debug /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.1.x86_64/usr/lib/debug/lib64/libc-2.20-2014.11.so.debug [ 23s] ++ readelf -n /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.1.x86_64/usr/lib/debug/lib64/libc-2.20-2014.11.so.debug [ 23s] ++ grep 'Build ID' [ 23s] ++ awk '{print $3}' [ 23s] readelf: Error: no .dynamic section in the dynamic segment [ 23s] + BuildID=9083dccbf215873a0ab287f3bb66c7934f094d9f [ 23s] ++ echo 9083dccbf215873a0ab287f3bb66c7934f094d9f [ 23s] ++ cut -b-2 [ 23s] + Dir=90 [ 23s] ++ echo 9083dccbf215873a0ab287f3bb66c7934f094d9f [ 23s] ++ cut -b3- [ 23s] + File=83dccbf215873a0ab287f3bb66c7934f094d9f [ 23s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.1.x86_64/usr/lib/debug/.build-id/90 [ 23s] + cp -d /usr/lib/debug/.build-id/90/83dccbf215873a0ab287f3bb66c7934f094d9f.debug /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.1.x86_64/usr/lib/debug/.build-id/90 [ 23s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/tizen-debug-2.20 [ 23s] + /usr/lib/rpm/check-buildroot [ 23s] + /usr/lib/rpm//brp-compress [ 23s] + /usr/lib/rpm/brp-strip-static-archive /bin/true [ 23s] + /usr/lib/rpm/brp-python-hardlink [ 23s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.1.x86_64 [ 23s] Processing files: tizen-debug-2.20-1.1.x86_64 [ 23s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl [ 23s] cXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 23s] [ 23s] Provides: tizen-debug = 2.20-1.1 tizen-debug(x86-64) = 2.20-1.1 [ 23s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 23s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.1.x86_64 [ 23s] Wrote: /home/abuild/rpmbuild/SRPMS/tizen-debug-2.20-1.1.src.rpm [ 24s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/tizen-debug-2.20-1.1.x86_64.rpm [ 24s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.JjU7sR [ 24s] + umask 022 [ 24s] + cd /home/abuild/rpmbuild/BUILD [ 24s] + cd tizen-debug-2.20 [ 24s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.1.x86_64 [ 24s] + exit 0 [ 24s] ... checking for files with abuild user/group [ 24s] ... creating baselibs [ 24s] ... saving built statistics [ 24s] ... saving built packages [ 24s] /home/abuild/rpmbuild/RPMS/x86_64/tizen-debug-2.20-1.1.x86_64.rpm [ 24s] /home/abuild/rpmbuild/SRPMS/tizen-debug-2.20-1.1.src.rpm [ 24s] /home/abuild/rpmbuild/OTHER/_statistics [ 24s] [ 24s] w06 finished "build tizen-debug.spec" at Thu Jan 5 10:48:38 UTC 2017. [ 24s] [ 25s] /.build/build: line 368: 238 Killed background_monitor_process [ 27s] [ 17.453221] SysRq : Power Off [ 27s] [ 17.533589] Power down. [ 28s] build: extracting built packages... [ 28s] tizen-debug-2.20-1.1.x86_64.rpm [ 28s] tizen-debug-2.20-1.1.src.rpm [ 28s] _statistics