[ 0s] Using BUILD_ROOT=/srv/build/root_1/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_1/root [ 0s] [ 0s] [ 0s] w26 started "build _service:gbs:gssdp.spec" at Thu Jan 5 03:37:14 UTC 2017. [ 0s] [ 0s] Building gssdp for project 'Tizen:3.0.M2:Mobile' repository 'emulator32-wayland' arch 'i586' srcmd5 '8cb0864c392e4fb2d9032589554eabeb' [ 0s] [ 0s] processing specfile /srv/build/root_1/.build-srcdir/_service:gbs:gssdp.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_1/.build-srcdir/_service:gbs:gssdp.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_1/.build.rpmlist /srv/build/root_1/.build-srcdir/_service:gbs:gssdp.spec build rpmlint-Factory ... [ 0s] Copying qemu-fix-build-hang.sh [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/35] preinstalling libmagic-data... [ 1s] [2/35] preinstalling setup... [ 1s] [3/35] preinstalling filesystem... [ 1s] [4/35] preinstalling glibc... [ 1s] [5/35] preinstalling bash... [ 1s] [6/35] preinstalling diffutils... [ 1s] [7/35] preinstalling grep... [ 1s] [8/35] preinstalling libattr... [ 1s] [9/35] preinstalling libbz2... [ 1s] [10/35] preinstalling libcap... [ 1s] [11/35] preinstalling libelf... [ 1s] [12/35] preinstalling libfreebl3... [ 1s] [13/35] preinstalling libgcc... [ 1s] [14/35] preinstalling liblua... [ 1s] [15/35] preinstalling liblzma... [ 1s] [16/35] preinstalling libncurses... [ 1s] [17/35] preinstalling libpopt... [ 1s] [18/35] preinstalling libsmack... [ 1s] [19/35] preinstalling libsqlite... [ 1s] [20/35] preinstalling nspr... [ 1s] [21/35] preinstalling sed... [ 1s] [22/35] preinstalling zlib... [ 1s] [23/35] preinstalling coreutils... [ 2s] [24/35] preinstalling libacl... [ 2s] [25/35] preinstalling libreadline... [ 2s] [26/35] preinstalling smack... [ 2s] [27/35] preinstalling bzip2... [ 2s] [28/35] preinstalling libmagic... [ 2s] [29/35] preinstalling libxml2... [ 2s] [30/35] preinstalling tar... [ 2s] [31/35] preinstalling util-linux... [ 2s] [32/35] preinstalling util-linux-su... [ 2s] [33/35] preinstalling nss... [ 2s] [34/35] preinstalling libsoftokn3... [ 2s] [35/35] preinstalling rpm... [ 2s] [ 2s] [1/9] preinstalling libext2fs... [ 2s] [2/9] preinstalling libpcre... [ 2s] [3/9] preinstalling libsmartcols... [ 2s] [4/9] preinstalling libuuid... [ 2s] [5/9] preinstalling perl... [ 3s] [6/9] preinstalling grep... [ 3s] [7/9] preinstalling libblkid... [ 3s] [8/9] preinstalling libmount... [ 3s] [9/9] preinstalling util-linux... [ 3s] copying packages... [ 4s] reordering...cycle: gio-branding-upstream -> libgio [ 4s] breaking dependency libgio -> gio-branding-upstream [ 4s] cycle: libsoftokn3 -> nss [ 4s] breaking dependency nss -> libsoftokn3 [ 4s] done [ 4s] booting kvm ... [ 4s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 6000 -drive file=/srv/build/root_1/root,if=virtio,cache=none -drive file=/srv/build/root_1/root,if=ide,index=0,cache=none -drive file=/srv/build/root_1/swap,if=virtio,cache=none -smp 4 [ 6s] [ 0.000000] tsc: Fast TSC calibration failed [ 6s] doing fast boot [ 6s] Creating device nodes with udev [ 9s] Waiting for device /dev/vda to appear: ok [ 9s] fsck from util-linux 2.21.2 [ 9s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 9s] /dev/vda: clean, 4413/2392064 files, 185936/9568256 blocks [ 9s] fsck succeeded. Mounting root device read-write. [ 9s] Mounting root /dev/vda [ 9s] mount -o rw -t ext4 /dev/vda /root [ 9s] replacing /etc/mtab with symlink to /proc/self/mounts [ 9s] 2nd stage started in virtual machine [ 9s] machine type: x86_64 [ 9s] switching personality to 8... [ 9s] 2nd stage started in virtual machine [ 9s] machine type: i686 [ 9s] swapon: /dev/vdb: found signature [pagesize=4096, signature=swap] [ 9s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 9s] swapon /dev/vdb [ 9s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 9s] mount: none is already mounted or /proc busy [ 9s] mount: none is already mounted or /dev/pts busy [ 9s] logging output to //.build.log... [ 9s] processing specfile /.build-srcdir/_service:gbs:gssdp.spec ... [ 9s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:gssdp.spec build rpmlint-Factory ... [ 9s] running setup postinstall script [ 9s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 9s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 9s] initializing rpm db... [ 9s] [1/132] installing libmagic-data-5.28-1.1 [ 9s] [2/132] installing setup-0.9-1.1 [ 9s] [3/132] installing terminfo-base-5.9-1.1 [ 9s] [4/132] installing filesystem-3.1-1.1 [ 9s] [5/132] installing glibc-2.20-1.1 [ 10s] [6/132] installing bash-3.2.57-1.1 [ 10s] [7/132] installing cpio-2.11-1.1 [ 10s] [8/132] installing diffutils-3.3-1.1 [ 10s] [9/132] installing findutils-4.3.8-1.1 [ 10s] [10/132] installing hostname-3.12-1.1 [ 10s] [11/132] installing libatomic-4.9.2-1.2 [ 10s] [12/132] installing libattr-2.4.47-1.1 [ 10s] [13/132] installing libbz2-1.0.6-1.5 [ 10s] [14/132] installing libcap-2.24-1.1 [ 10s] [15/132] installing libelf-0.153-1.5 [ 10s] [16/132] installing libelf0-0.8.13-1.1 [ 10s] [17/132] installing libexpat-2.2.0-1.1 [ 10s] [18/132] installing libext2fs-1.42.13-1.1 [ 10s] [19/132] installing libffi-3.1-1.1 [ 10s] [20/132] installing libfreebl3-3.23-1.5 [ 10s] [21/132] installing libgcc-4.9.2-1.2 [ 10s] [22/132] installing libgmp-4.2.1-1.1 [ 10s] [23/132] installing libgomp-4.9.2-1.2 [ 10s] [24/132] installing libitm-4.9.2-1.2 [ 10s] [25/132] installing libltdl-2.4.2-1.1 [ 11s] [26/132] installing liblua-5.1.4-1.1 [ 11s] [27/132] installing liblzma-5.1.3-1.1 [ 11s] [28/132] installing libnettle-2.7.1-1.1 [ 11s] [29/132] installing libpcre-8.39-1.1 [ 11s] [30/132] installing libpopt-1.16-1.1 [ 11s] [31/132] installing libpython-2.7.8-1.2 [ 11s] [32/132] installing libsmack-1.3.0-1.1 [ 11s] [33/132] installing libsmartcols-2.28-1.1 [ 11s] [34/132] installing libsqlite-3.8.10.2-1.1 [ 11s] [35/132] installing libtasn1-4.8-1.1 [ 11s] [36/132] installing libuuid-2.28-1.1 [ 11s] [37/132] installing m4-1.4.17-1.1 [ 11s] [38/132] installing net-tools-2.0_20121208git-1.1 [ 11s] [39/132] installing nspr-4.12-1.1 [ 11s] [40/132] installing patch-2.7-1.1 [ 11s] [41/132] installing pkg-config-0.28-1.1 [ 11s] [42/132] installing sed-4.1c-1.1 [ 11s] [43/132] installing update-alternatives-1.16.3-1.1 [ 11s] [44/132] installing which-2.20-1.1 [ 11s] [45/132] installing zlib-1.2.8-1.1 [ 11s] [46/132] installing libncurses-5.9-1.1 [ 12s] [47/132] installing libncurses6-5.9-1.1 [ 12s] [48/132] installing shadow-utils-4.1.4.2-1.1 [ 12s] [49/132] installing build-compare-2015.04.28-1.4 [ 12s] [50/132] installing coreutils-6.9-1.1 [ 12s] [51/132] installing cpp-4.9.2-1.2 [ 12s] [52/132] installing gawk-3.1.5-1.1 [ 12s] [53/132] installing gcc-c++-4.9.2-1.2 [ 13s] [54/132] installing grep-2.5.2-1.1 [ 13s] [55/132] installing less-466-1.1 [ 13s] [56/132] installing libacl-2.2.52-1.1 [ 13s] [57/132] installing libasm-0.153-1.5 [ 13s] [58/132] installing libblkid-2.28-1.1 [ 13s] [59/132] installing libcap-tools-2.24-1.1 [ 13s] [60/132] installing libglib-2.44.1-1.1 [ 13s] [61/132] installing libopenssl-1.0.2j-1.1 [ 13s] [62/132] installing libpcreposix-8.39-1.1 [ 13s] [63/132] installing libreadline-5.2-1.1 [ 13s] [64/132] installing libstdc++-4.9.2-1.2 [ 13s] [65/132] installing make-4.0-1.1 [ 14s] [66/132] installing nss-certs-3.23-1.5 [ 14s] [67/132] installing smack-1.3.0-1.1 [ 14s] [68/132] installing xz-devel-5.1.3-1.1 [ 14s] [69/132] installing binutils-2.25-1.2 [ 14s] [70/132] installing bzip2-1.0.6-1.5 [ 14s] [71/132] installing libhogweed-2.7.1-1.1 [ 14s] [72/132] installing libmagic-5.28-1.1 [ 14s] [73/132] installing libxml2-2.9.4-1.1 [ 14s] [74/132] installing xz-5.1.3-1.1 [ 14s] [75/132] installing ncurses-devel-5.9-1.1 [ 14s] [76/132] installing libdw-0.153-1.5 [ 14s] [77/132] installing libstdc++-devel-4.9.2-1.2 [ 14s] [78/132] installing file-5.28-1.1 [ 15s] [79/132] installing libgmodule-2.44.1-1.1 [ 15s] [80/132] installing libgthread-2.44.1-1.1 [ 15s] [81/132] installing libmount-2.28-1.1 [ 15s] [82/132] installing linux-glibc-devel-3.10-1.1 [ 15s] [83/132] installing readline-devel-5.2-1.1 [ 15s] [84/132] installing tar-1.17-1.1 [ 15s] [85/132] installing db4-4.8.30.NC-1.1 [ 15s] [86/132] installing glibc-locale-2.20-1.1 [ 15s] [87/132] installing gzip-1.3.12-1.1 [ 15s] [88/132] installing libcilkrts-4.9.2-1.2 [ 15s] [89/132] installing libfdisk1-2.28-1.1 [ 15s] [90/132] installing libgobject-2.44.1-1.1 [ 15s] [91/132] installing libubsan-4.9.2-1.2 [ 15s] [92/132] installing libxml2-tools-2.9.4-1.1 [ 15s] [93/132] installing pam-1.1.6-1.1 [ 16s] [94/132] installing security-config-1.0-1.1 [ 16s] usermod: user 'buxton' does not exist [ 16s] usermod: user 'dbus' does not exist [ 16s] [95/132] installing libpcrecpp-8.39-1.1 [ 16s] [96/132] installing tzdata-2016i-1.1 [ 16s] [97/132] installing libgnutls-3.3.5-1.1 [ 16s] [98/132] installing elfutils-0.153-1.5 [ 16s] [99/132] installing shared-mime-info-1.3-1.1 [ 17s] [100/132] installing ca-certificates-0.0.4-1.1 [ 17s] [101/132] installing glibc-devel-2.20-1.1 [ 17s] [102/132] installing perl-5.20.0-1.5 [ 18s] [103/132] installing libsystemd-219-1.1 [ 18s] [104/132] installing pcre-devel-8.39-1.1 [ 18s] [105/132] installing gcc-4.9.2-1.2 [ 19s] [106/132] installing python-2.7.8-1.2 [ 20s] [107/132] installing util-linux-2.28-1.1 [ 20s] [108/132] installing build-mkbaselibs-20120927-1.1 [ 20s] [109/132] installing autoconf-2.69-1.1 [ 20s] [110/132] installing dbus-libs-1.10.6-1.1 [ 20s] [111/132] installing python-xml-2.7.8-1.2 [ 20s] [112/132] installing util-linux-su-2.28-1.1 [ 20s] [113/132] installing zlib-devel-1.2.8-1.1 [ 20s] [114/132] installing libdlog-0.5.1-1.1 [ 20s] [115/132] installing dbus-devel-1.10.6-1.1 [ 20s] [116/132] installing automake-1.14.1-1.1 [ 20s] [117/132] installing build-20120927-1.1 [ 20s] [118/132] installing libxml2-devel-2.9.4-1.1 [ 20s] [119/132] installing libtool-2.4.2-1.1 [ 20s] [120/132] installing nss-3.23-1.5 [ 21s] [121/132] installing libgio-2.44.1-1.1 [ 21s] [122/132] installing gio-branding-upstream-2.44.1-1.1 [ 21s] [123/132] installing dbus-glib-0.100.2-1.1 [ 21s] [124/132] installing libsoftokn3-3.23-1.5 [ 21s] [125/132] installing glib2-tools-2.44.1-1.1 [ 21s] [126/132] installing glib-networking-2.38.0-1.1 [ 21s] [127/132] installing rpm-4.11.0.1-1.1 [ 21s] [128/132] installing libsoup-2.46.0-1.1 [ 21s] [129/132] installing glib2-devel-2.44.1-1.1 [ 21s] [130/132] installing rpm-build-4.11.0.1-1.1 [ 21s] [131/132] installing libsoup-devel-2.46.0-1.1 [ 21s] [132/132] installing dbus-glib-devel-0.100.2-1.1 [ 21s] removing nis flags from //etc/nsswitch.conf... [ 21s] now finalizing build dir... [ 22s] build target is i686-tizen-linux [ 22s] ----------------------------------------------------------------- [ 22s] I have the following modifications for gssdp.spec: [ 22s] 11c11 [ 22s] < Release: 1 [ 22s] --- [ 22s] > Release: 1.1 [ 22s] ----------------------------------------------------------------- [ 22s] ----- building gssdp.spec (user abuild) [ 22s] ----------------------------------------------------------------- [ 22s] ----------------------------------------------------------------- [ 22s] Running qemu build hang workaround... [ 22s] /bin/ps command not found [ 22s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=i686-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0.M2:Mobile/emulator32-wayland/8cb0864c392e4fb2d9032589554eabeb-gssdp' /home/abuild/rpmbuild/SOURCES/gssdp.spec [ 22s] Building target platforms: i686-tizen-linux [ 22s] Building for target i686-tizen-linux [ 22s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.nvOAIg [ 22s] + umask 022 [ 22s] + cd /home/abuild/rpmbuild/BUILD [ 22s] + cd /home/abuild/rpmbuild/BUILD [ 22s] + rm -rf gssdp-0.14.4 [ 22s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/gssdp-0.14.4.tar.xz [ 22s] + /bin/tar -xf - [ 22s] + STATUS=0 [ 22s] + '[' 0 -ne 0 ']' [ 22s] + cd gssdp-0.14.4 [ 22s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 22s] + echo 'Patch #0 (2788270-to-9eb6824.diff.gz):' [ 22s] Patch #0 (2788270-to-9eb6824.diff.gz): [ 22s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/2788270-to-9eb6824.diff.gz [ 22s] + /bin/patch -p1 --fuzz=2 [ 22s] patching file INSTALL [ 22s] patching file Makefile.in [ 22s] patching file aclocal.m4 [ 22s] patching file build-aux/depcomp [ 22s] patching file build-aux/missing [ 22s] patching file build-aux/test-driver [ 22s] patching file configure [ 22s] patching file doc/Makefile.in [ 22s] patching file doc/html/GSSDPClient.html [ 22s] patching file doc/html/GSSDPResourceBrowser.html [ 22s] patching file doc/html/GSSDPResourceGroup.html [ 22s] patching file doc/html/annotation-glossary.html [ 22s] patching file doc/html/ch01.html [ 22s] patching file doc/html/gssdp-Error-codes.html [ 22s] patching file doc/html/home.png [ 22s] patching file doc/html/index.html [ 22s] patching file doc/html/left.png [ 22s] patching file doc/html/right.png [ 22s] patching file doc/html/up.png [ 22s] patching file gssdp.manifest [ 22s] patching file gtk-doc.make [ 22s] patching file libgssdp/Makefile.in [ 22s] patching file m4/gtk-doc.m4 [ 22s] patching file m4/libtool.m4 [ 22s] patching file m4/ltoptions.m4 [ 22s] patching file m4/ltsugar.m4 [ 22s] patching file m4/ltversion.m4 [ 22s] patching file m4/lt~obsolete.m4 [ 22s] patching file tests/Makefile.in [ 22s] patching file tests/gtest/Makefile.in [ 22s] patching file tools/Makefile.in [ 22s] patching file vala/Makefile.in [ 22s] + exit 0 [ 22s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.4UqF1l [ 22s] + umask 022 [ 22s] + cd /home/abuild/rpmbuild/BUILD [ 22s] + cd gssdp-0.14.4 [ 22s] ++ uname -m [ 22s] + [[ i686 == \a\a\r\c\h\6\4 ]] [ 22s] + LANG=C [ 22s] + export LANG [ 22s] + unset DISPLAY [ 22s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 22s] + export CFLAGS [ 22s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 22s] + export CXXFLAGS [ 22s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I%_fmoddir' [ 22s] + export FFLAGS [ 22s] + LDFLAGS= [ 22s] + export LDFLAGS [ 22s] + LD_AS_NEEDED=1 [ 22s] + export LD_AS_NEEDED [ 22s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 22s] + export CFLAGS [ 22s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 22s] + export CXXFLAGS [ 22s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I%_fmoddir' [ 22s] + export FFLAGS [ 22s] + ./configure --build=i686-tizen-linux-gnu --host=i686-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --enable-introspection=no --enable-gtk-doc-html=no [ 22s] checking for a BSD-compatible install... /usr/bin/install -c [ 23s] checking whether build environment is sane... yes [ 23s] checking for a thread-safe mkdir -p... /usr/bin/mkdir -p [ 23s] checking for gawk... gawk [ 23s] checking whether make sets $(MAKE)... yes [ 23s] checking how to create a ustar tar archive... gnutar [ 23s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 23s] checking for style of include used by make... GNU [ 23s] checking for i686-tizen-linux-gnu-gcc... no [ 23s] checking for gcc... gcc [ 23s] checking whether the C compiler works... yes [ 23s] checking for C compiler default output file name... a.out [ 23s] checking for suffix of executables... [ 23s] checking whether we are cross compiling... no [ 23s] checking for suffix of object files... o [ 23s] checking whether we are using the GNU C compiler... yes [ 23s] checking whether gcc accepts -g... yes [ 23s] checking for gcc option to accept ISO C89... none needed [ 23s] checking dependency style of gcc... gcc3 [ 23s] checking what warning flags to pass to the C compiler... -Wall -Wmissing-prototypes [ 23s] checking what language compliance flags to pass to the C compiler... [ 23s] checking whether make supports nested variables... yes [ 23s] checking for library containing strerror... none required [ 23s] checking for i686-tizen-linux-gnu-gcc... gcc [ 23s] checking whether we are using the GNU C compiler... (cached) yes [ 23s] checking whether gcc accepts -g... (cached) yes [ 23s] checking for gcc option to accept ISO C89... (cached) none needed [ 23s] checking dependency style of gcc... (cached) gcc3 [ 23s] checking how to run the C preprocessor... gcc -E [ 23s] checking for grep that handles long lines and -e... /usr/bin/grep [ 23s] checking for egrep... /usr/bin/grep -E [ 24s] checking for ANSI C header files... yes [ 24s] checking build system type... i686-tizen-linux-gnu [ 24s] checking host system type... i686-tizen-linux-gnu [ 24s] checking how to print strings... printf [ 24s] checking for a sed that does not truncate output... /usr/bin/sed [ 24s] checking for fgrep... /usr/bin/grep -F [ 24s] checking for ld used by gcc... /usr/i586-tizen-linux-gnu/bin/ld [ 24s] checking if the linker (/usr/i586-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 24s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 24s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 24s] checking whether ln -s works... yes [ 24s] checking the maximum length of command line arguments... 1572864 [ 24s] checking whether the shell understands some XSI constructs... yes [ 24s] checking whether the shell understands "+="... yes [ 24s] checking how to convert i686-tizen-linux-gnu file names to i686-tizen-linux-gnu format... func_convert_file_noop [ 24s] checking how to convert i686-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 24s] checking for /usr/i586-tizen-linux-gnu/bin/ld option to reload object files... -r [ 24s] checking for i686-tizen-linux-gnu-objdump... no [ 24s] checking for objdump... objdump [ 24s] checking how to recognize dependent libraries... pass_all [ 24s] checking for i686-tizen-linux-gnu-dlltool... no [ 24s] checking for dlltool... no [ 24s] checking how to associate runtime and link libraries... printf %s\n [ 24s] checking for i686-tizen-linux-gnu-ar... no [ 24s] checking for ar... ar [ 24s] checking for archiver @FILE support... @ [ 24s] checking for i686-tizen-linux-gnu-strip... no [ 24s] checking for strip... strip [ 24s] checking for i686-tizen-linux-gnu-ranlib... no [ 24s] checking for ranlib... ranlib [ 24s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 24s] checking for sysroot... no [ 24s] checking for i686-tizen-linux-gnu-mt... no [ 24s] checking for mt... no [ 24s] checking if : is a manifest tool... no [ 24s] checking for sys/types.h... yes [ 24s] checking for sys/stat.h... yes [ 24s] checking for stdlib.h... yes [ 24s] checking for string.h... yes [ 24s] checking for memory.h... yes [ 24s] checking for strings.h... yes [ 24s] checking for inttypes.h... yes [ 24s] checking for stdint.h... yes [ 24s] checking for unistd.h... yes [ 24s] checking for dlfcn.h... yes [ 24s] checking for objdir... .libs [ 24s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 24s] checking for gcc option to produce PIC... -fPIC -DPIC [ 24s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 24s] checking if gcc static flag -static works... no [ 24s] checking if gcc supports -c -o file.o... yes [ 24s] checking if gcc supports -c -o file.o... (cached) yes [ 24s] checking whether the gcc linker (/usr/i586-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 24s] checking whether -lc should be explicitly linked in... no [ 24s] checking dynamic linker characteristics... GNU/Linux ld.so [ 24s] checking how to hardcode library paths into programs... immediate [ 24s] checking whether stripping libraries is possible... yes [ 24s] checking if libtool supports shared libraries... yes [ 24s] checking whether to build shared libraries... yes [ 24s] checking whether to build static libraries... yes [ 24s] checking for i686-tizen-linux-gnu-pkg-config... /usr/bin/i686-tizen-linux-gnu-pkg-config [ 24s] checking pkg-config is at least version 0.9.0... yes [ 24s] checking for LIBGSSDP... yes [ 24s] checking for LIBGTK... no [ 24s] configure: WARNING: gtk+ 3.0 or greater not found, some tools will not build. [ 24s] checking for gobject-introspection... no (disabled, use --enable-introspection to enable) [ 24s] checking for Win32... no [ 24s] checking for gtkdoc-check... no [ 24s] checking for gtkdoc-rebase... no [ 24s] checking for gtkdoc-mkpdf... no [ 24s] checking whether to build gtk-doc documentation... no [ 24s] configure: creating ./config.status [ 25s] config.status: creating Makefile [ 25s] config.status: creating libgssdp/Makefile [ 25s] config.status: creating tools/Makefile [ 25s] config.status: creating tests/Makefile [ 25s] config.status: creating tests/gtest/Makefile [ 25s] config.status: creating vala/Makefile [ 25s] config.status: creating doc/Makefile [ 25s] config.status: creating doc/version.xml [ 25s] config.status: creating gssdp-1.0.pc [ 25s] config.status: creating gssdp-1.0-uninstalled.pc [ 25s] config.status: creating config.h [ 25s] config.status: executing depfiles commands [ 25s] config.status: executing libtool commands [ 25s] [ 25s] gssdp 0.14.4 [ 25s] --------------------- [ 25s] [ 25s] Prefix: /usr [ 25s] GObject-Introspection: no (disabled, use --enable-introspection to enable) [ 25s] VALA bindings: no [ 25s] [ 25s] + make -j4 [ 25s] CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /home/abuild/rpmbuild/BUILD/gssdp-0.14.4/build-aux/missing --run aclocal-1.11 -I m4 [ 25s] /home/abuild/rpmbuild/BUILD/gssdp-0.14.4/build-aux/missing: line 52: aclocal-1.11: command not found [ 25s] WARNING: `aclocal-1.11' is missing on your system. You should only need it if [ 25s] you modified `acinclude.m4' or `configure.ac'. You might want [ 25s] to install the `Automake' and `Perl' packages. Grab them from [ 25s] any GNU archive site. [ 25s] CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /home/abuild/rpmbuild/BUILD/gssdp-0.14.4/build-aux/missing --run autoconf [ 25s] cd . && /bin/sh /home/abuild/rpmbuild/BUILD/gssdp-0.14.4/build-aux/missing --run automake-1.11 --gnu [ 25s] /home/abuild/rpmbuild/BUILD/gssdp-0.14.4/build-aux/missing: line 52: automake-1.11: command not found [ 25s] WARNING: `automake-1.11' is missing on your system. You should only need it if [ 25s] you modified `Makefile.am', `acinclude.m4' or `configure.ac'. [ 25s] You might want to install the `Automake' and `Perl' packages. [ 25s] Grab them from any GNU archive site. [ 26s] /bin/sh ./config.status --recheck [ 26s] running CONFIG_SHELL=/bin/sh /bin/sh ./configure --build=i686-tizen-linux-gnu --host=i686-tizen-linux-gnu --program-prefix= --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --enable-introspection=no --enable-gtk-doc-html=no build_alias=i686-tizen-linux-gnu host_alias=i686-tizen-linux-gnu CFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g LDFLAGS= --no-create --no-recursion [ 26s] checking for a BSD-compatible install... /usr/bin/install -c [ 27s] checking whether build environment is sane... yes [ 27s] checking for a thread-safe mkdir -p... /usr/bin/mkdir -p [ 27s] checking for gawk... gawk [ 27s] checking whether make sets $(MAKE)... yes [ 27s] checking how to create a ustar tar archive... gnutar [ 27s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 27s] checking for style of include used by make... GNU [ 27s] checking for i686-tizen-linux-gnu-gcc... no [ 27s] checking for gcc... gcc [ 27s] checking whether the C compiler works... yes [ 27s] checking for C compiler default output file name... a.out [ 27s] checking for suffix of executables... [ 27s] checking whether we are cross compiling... no [ 27s] checking for suffix of object files... o [ 27s] checking whether we are using the GNU C compiler... yes [ 27s] checking whether gcc accepts -g... yes [ 27s] checking for gcc option to accept ISO C89... none needed [ 27s] checking dependency style of gcc... gcc3 [ 27s] checking what warning flags to pass to the C compiler... -Wall -Wmissing-prototypes [ 27s] checking what language compliance flags to pass to the C compiler... [ 27s] checking whether make supports nested variables... yes [ 27s] checking for library containing strerror... none required [ 27s] checking for i686-tizen-linux-gnu-gcc... gcc [ 27s] checking whether we are using the GNU C compiler... (cached) yes [ 27s] checking whether gcc accepts -g... (cached) yes [ 27s] checking for gcc option to accept ISO C89... (cached) none needed [ 27s] checking dependency style of gcc... (cached) gcc3 [ 27s] checking how to run the C preprocessor... gcc -E [ 27s] checking for grep that handles long lines and -e... /usr/bin/grep [ 27s] checking for egrep... /usr/bin/grep -E [ 27s] checking for ANSI C header files... yes [ 27s] checking build system type... i686-tizen-linux-gnu [ 27s] checking host system type... i686-tizen-linux-gnu [ 27s] checking how to print strings... printf [ 27s] checking for a sed that does not truncate output... /usr/bin/sed [ 27s] checking for fgrep... /usr/bin/grep -F [ 27s] checking for ld used by gcc... /usr/i586-tizen-linux-gnu/bin/ld [ 27s] checking if the linker (/usr/i586-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 27s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 27s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 27s] checking whether ln -s works... yes [ 27s] checking the maximum length of command line arguments... 1572864 [ 27s] checking whether the shell understands some XSI constructs... yes [ 27s] checking whether the shell understands "+="... yes [ 27s] checking how to convert i686-tizen-linux-gnu file names to i686-tizen-linux-gnu format... func_convert_file_noop [ 27s] checking how to convert i686-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 27s] checking for /usr/i586-tizen-linux-gnu/bin/ld option to reload object files... -r [ 27s] checking for i686-tizen-linux-gnu-objdump... no [ 27s] checking for objdump... objdump [ 27s] checking how to recognize dependent libraries... pass_all [ 27s] checking for i686-tizen-linux-gnu-dlltool... no [ 27s] checking for dlltool... no [ 27s] checking how to associate runtime and link libraries... printf %s\n [ 27s] checking for i686-tizen-linux-gnu-ar... no [ 27s] checking for ar... ar [ 27s] checking for archiver @FILE support... @ [ 27s] checking for i686-tizen-linux-gnu-strip... no [ 27s] checking for strip... strip [ 27s] checking for i686-tizen-linux-gnu-ranlib... no [ 27s] checking for ranlib... ranlib [ 28s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 28s] checking for sysroot... no [ 28s] checking for i686-tizen-linux-gnu-mt... no [ 28s] checking for mt... no [ 28s] checking if : is a manifest tool... no [ 28s] checking for sys/types.h... yes [ 28s] checking for sys/stat.h... yes [ 28s] checking for stdlib.h... yes [ 28s] checking for string.h... yes [ 28s] checking for memory.h... yes [ 28s] checking for strings.h... yes [ 28s] checking for inttypes.h... yes [ 28s] checking for stdint.h... yes [ 28s] checking for unistd.h... yes [ 28s] checking for dlfcn.h... yes [ 28s] checking for objdir... .libs [ 28s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 28s] checking for gcc option to produce PIC... -fPIC -DPIC [ 28s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 28s] checking if gcc static flag -static works... no [ 28s] checking if gcc supports -c -o file.o... yes [ 28s] checking if gcc supports -c -o file.o... (cached) yes [ 28s] checking whether the gcc linker (/usr/i586-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 28s] checking whether -lc should be explicitly linked in... no [ 28s] checking dynamic linker characteristics... GNU/Linux ld.so [ 28s] checking how to hardcode library paths into programs... immediate [ 28s] checking whether stripping libraries is possible... yes [ 28s] checking if libtool supports shared libraries... yes [ 28s] checking whether to build shared libraries... yes [ 28s] checking whether to build static libraries... yes [ 28s] checking for i686-tizen-linux-gnu-pkg-config... /usr/bin/i686-tizen-linux-gnu-pkg-config [ 28s] checking pkg-config is at least version 0.9.0... yes [ 28s] checking for LIBGSSDP... yes [ 28s] checking for LIBGTK... no [ 28s] configure: WARNING: gtk+ 3.0 or greater not found, some tools will not build. [ 28s] checking for gobject-introspection... no (disabled, use --enable-introspection to enable) [ 28s] checking for Win32... no [ 28s] checking for gtkdoc-check... no [ 28s] checking for gtkdoc-rebase... no [ 28s] checking for gtkdoc-mkpdf... no [ 28s] checking whether to build gtk-doc documentation... no [ 28s] configure: creating ./config.status [ 28s] [ 28s] gssdp 0.14.4 [ 28s] --------------------- [ 28s] [ 28s] Prefix: /usr [ 28s] GObject-Introspection: no (disabled, use --enable-introspection to enable) [ 28s] VALA bindings: no [ 28s] [ 28s] /bin/sh ./config.status [ 29s] config.status: creating Makefile [ 29s] config.status: creating libgssdp/Makefile [ 29s] config.status: creating tools/Makefile [ 29s] config.status: creating tests/Makefile [ 29s] config.status: creating tests/gtest/Makefile [ 29s] config.status: creating vala/Makefile [ 29s] config.status: creating doc/Makefile [ 29s] config.status: creating doc/version.xml [ 29s] config.status: creating gssdp-1.0.pc [ 29s] config.status: creating gssdp-1.0-uninstalled.pc [ 29s] config.status: creating config.h [ 29s] config.status: config.h is unchanged [ 29s] config.status: executing depfiles commands [ 29s] config.status: executing libtool commands [ 29s] (CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /home/abuild/rpmbuild/BUILD/gssdp-0.14.4/build-aux/missing --run autoheader) [ 29s] rm -f stamp-h1 [ 29s] touch config.h.in [ 29s] cd . && /bin/sh ./config.status config.h [ 29s] config.status: creating config.h [ 29s] config.status: config.h is unchanged [ 29s] make all-recursive [ 29s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4' [ 29s] Making all in libgssdp [ 29s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 29s] make all-am [ 29s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 29s] CC gssdp-error.lo [ 29s] CC gssdp-resource-browser.lo [ 29s] CC gssdp-resource-group.lo [ 29s] CC gssdp-client.lo [ 29s] CC gssdp-socket-source.lo [ 30s] CC gssdp-socket-functions.lo [ 30s] CC gssdp-marshal.lo [ 30s] CCLD libgssdp-1.0.la [ 30s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 30s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 30s] Making all in tests [ 30s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 30s] Making all in gtest [ 30s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests/gtest' [ 30s] CC test-util.o [ 30s] AR libtestutil.a [ 30s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests/gtest' [ 30s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 30s] CC test-browser.o [ 30s] CC test-publish.o [ 30s] CCLD test-publish [ 30s] CCLD test-browser [ 30s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 30s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 30s] Making all in doc [ 30s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/doc' [ 30s] make[2]: Nothing to be done for 'all'. [ 30s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/doc' [ 30s] Making all in vala [ 30s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/vala' [ 30s] make[2]: Nothing to be done for 'all'. [ 30s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/vala' [ 30s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4' [ 30s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4' [ 30s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4' [ 30s] + exit 0 [ 30s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.TWDETW [ 30s] + umask 022 [ 30s] + cd /home/abuild/rpmbuild/BUILD [ 30s] + cd gssdp-0.14.4 [ 30s] + LANG=C [ 30s] + export LANG [ 30s] + unset DISPLAY [ 30s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.i386 [ 30s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.i386 [ 30s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.i386 [ 30s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.i386 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.i386 install [ 30s] Making install in libgssdp [ 30s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 30s] /bin/make install-am [ 30s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 30s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 30s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.i386/usr/lib' [ 30s] /bin/sh ../libtool --mode=install /usr/bin/install -c libgssdp-1.0.la '/home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.i386/usr/lib' [ 30s] libtool: install: /usr/bin/install -c .libs/libgssdp-1.0.so.3.0.0 /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.i386/usr/lib/libgssdp-1.0.so.3.0.0 [ 30s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.i386/usr/lib && { ln -s -f libgssdp-1.0.so.3.0.0 libgssdp-1.0.so.3 || { rm -f libgssdp-1.0.so.3 && ln -s libgssdp-1.0.so.3.0.0 libgssdp-1.0.so.3; }; }) [ 30s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.i386/usr/lib && { ln -s -f libgssdp-1.0.so.3.0.0 libgssdp-1.0.so || { rm -f libgssdp-1.0.so && ln -s libgssdp-1.0.so.3.0.0 libgssdp-1.0.so; }; }) [ 30s] libtool: install: /usr/bin/install -c .libs/libgssdp-1.0.lai /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.i386/usr/lib/libgssdp-1.0.la [ 30s] libtool: install: /usr/bin/install -c .libs/libgssdp-1.0.a /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.i386/usr/lib/libgssdp-1.0.a [ 30s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.i386/usr/lib/libgssdp-1.0.a [ 30s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.i386/usr/lib/libgssdp-1.0.a [ 30s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 30s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.i386/usr/include/gssdp-1.0/libgssdp' [ 30s] /usr/bin/install -c -m 644 gssdp-client.h gssdp-error.h gssdp-resource-browser.h gssdp-resource-group.h gssdp.h '/home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.i386/usr/include/gssdp-1.0/libgssdp' [ 30s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 30s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 30s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 30s] Making install in tests [ 30s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 30s] Making install in gtest [ 30s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests/gtest' [ 30s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests/gtest' [ 30s] make[3]: Nothing to be done for 'install-exec-am'. [ 30s] make[3]: Nothing to be done for 'install-data-am'. [ 30s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests/gtest' [ 30s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests/gtest' [ 31s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 31s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 31s] make[3]: Nothing to be done for 'install-exec-am'. [ 31s] make[3]: Nothing to be done for 'install-data-am'. [ 31s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 31s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 31s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 31s] Making install in doc [ 31s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/doc' [ 31s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/doc' [ 31s] make[2]: Nothing to be done for 'install-exec-am'. [ 31s] /usr/bin/install -c -m 644 ./html/GSSDPClient.html [ 31s] /usr/bin/install -c -m 644 ./html/GSSDPResourceBrowser.html [ 31s] /usr/bin/install -c -m 644 ./html/GSSDPResourceGroup.html [ 31s] /usr/bin/install -c -m 644 ./html/annotation-glossary.html [ 31s] /usr/bin/install -c -m 644 ./html/ch01.html [ 31s] /usr/bin/install -c -m 644 ./html/gssdp-Error-codes.html [ 31s] /usr/bin/install -c -m 644 ./html/gssdp.devhelp2 [ 31s] /usr/bin/install -c -m 644 ./html/home.png [ 31s] /usr/bin/install -c -m 644 ./html/index.html [ 31s] /usr/bin/install -c -m 644 ./html/index.sgml [ 31s] /usr/bin/install -c -m 644 ./html/left.png [ 31s] /usr/bin/install -c -m 644 ./html/right.png [ 31s] /usr/bin/install -c -m 644 ./html/style.css [ 31s] /usr/bin/install -c -m 644 ./html/up.png [ 31s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/doc' [ 31s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/doc' [ 31s] Making install in vala [ 31s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/vala' [ 31s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/vala' [ 31s] make[2]: Nothing to be done for 'install-exec-am'. [ 31s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/vala' [ 31s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/vala' [ 31s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4' [ 31s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4' [ 31s] make[2]: Nothing to be done for 'install-exec-am'. [ 31s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.i386/usr/lib/pkgconfig' [ 31s] /usr/bin/install -c -m 644 gssdp-1.0.pc '/home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.i386/usr/lib/pkgconfig' [ 31s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4' [ 31s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4' [ 31s] + rm -f /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.i386/usr/share/info/dir [ 31s] + find /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.i386 -regex '.*\.la$' [ 31s] + xargs rm -f -- [ 31s] + find /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.i386 -regex '.*\.a$' [ 31s] + xargs rm -f -- [ 31s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.i386/usr/share/gtk-doc [ 31s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.i386/usr/share/license [ 31s] + cp COPYING /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.i386/usr/share/license/gssdp [ 31s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/gssdp-0.14.4 [ 31s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.i386/usr/lib/libgssdp-1.0.so.3.0.0 [ 31s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 31s] cpio: glibc-2.20/sysdeps/i386/crti.S: Cannot stat: No such file or directory [ 31s] cpio: glibc-2.20/sysdeps/i386/crtn.S: Cannot stat: No such file or directory [ 31s] 341 blocks [ 31s] + /usr/lib/rpm/check-buildroot [ 31s] + /usr/lib/rpm//brp-compress [ 31s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 31s] + /usr/lib/rpm/brp-python-hardlink [ 31s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.i386 [ 31s] Processing files: gssdp-0.14.4-1.1.i686 [ 31s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 31s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 31s] [ 31s] Provides: gssdp = 0.14.4-1.1 gssdp(x86-32) = 0.14.4-1.1 libgssdp-1.0.so.3 [ 31s] Requires(interp): /bin/sh /bin/sh [ 31s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 31s] Requires(post): /bin/sh [ 31s] Requires(postun): /bin/sh [ 31s] Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libgio-2.0.so.0 libglib-2.0.so.0 libgobject-2.0.so.0 libgssdp-1.0.so.3 libpthread.so.0 libpthread.so.0(GLIBC_2.0) libsoup-2.4.so.1 [ 31s] Processing files: gssdp-debugsource-0.14.4-1.1.i686 [ 31s] Provides: gssdp-debugsource = 0.14.4-1.1 gssdp-debugsource(x86-32) = 0.14.4-1.1 [ 31s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 31s] Processing files: gssdp-devel-0.14.4-1.1.i686 [ 31s] Provides: gssdp-devel = 0.14.4-1.1 gssdp-devel(x86-32) = 0.14.4-1.1 pkgconfig(gssdp-1.0) = 0.14.4 [ 31s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 31s] Requires: /usr/bin/pkg-config libgssdp-1.0.so.3 pkgconfig(gio-2.0) pkgconfig(gobject-2.0) [ 31s] Processing files: gssdp-debuginfo-0.14.4-1.1.i686 [ 31s] Provides: gssdp-debuginfo = 0.14.4-1.1 gssdp-debuginfo(x86-32) = 0.14.4-1.1 [ 31s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 31s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.i386 [ 31s] Wrote: /home/abuild/rpmbuild/SRPMS/gssdp-0.14.4-1.1.src.rpm [ 31s] Wrote: /home/abuild/rpmbuild/RPMS/i686/gssdp-0.14.4-1.1.i686.rpm [ 31s] Wrote: /home/abuild/rpmbuild/RPMS/i686/gssdp-debugsource-0.14.4-1.1.i686.rpm [ 31s] Wrote: /home/abuild/rpmbuild/RPMS/i686/gssdp-devel-0.14.4-1.1.i686.rpm [ 31s] Wrote: /home/abuild/rpmbuild/RPMS/i686/gssdp-debuginfo-0.14.4-1.1.i686.rpm [ 31s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.jFPjZF [ 31s] + umask 022 [ 31s] + cd /home/abuild/rpmbuild/BUILD [ 31s] + cd gssdp-0.14.4 [ 31s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.i386 [ 31s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.i386 [ 31s] + exit 0 [ 31s] ... checking for files with abuild user/group [ 31s] ... creating baselibs [ 31s] ... saving built statistics [ 31s] ... saving built packages [ 31s] /home/abuild/rpmbuild/RPMS/i686/gssdp-0.14.4-1.1.i686.rpm [ 31s] /home/abuild/rpmbuild/RPMS/i686/gssdp-debuginfo-0.14.4-1.1.i686.rpm [ 31s] /home/abuild/rpmbuild/RPMS/i686/gssdp-debugsource-0.14.4-1.1.i686.rpm [ 31s] /home/abuild/rpmbuild/RPMS/i686/gssdp-devel-0.14.4-1.1.i686.rpm [ 31s] /home/abuild/rpmbuild/SRPMS/gssdp-0.14.4-1.1.src.rpm [ 31s] /home/abuild/rpmbuild/OTHER/_statistics [ 31s] [ 31s] w26 finished "build gssdp.spec" at Thu Jan 5 03:37:45 UTC 2017. [ 31s] [ 32s] /.build/build: line 368: 217 Killed background_monitor_process [ 34s] [ 28.370271] SysRq : Power Off [ 34s] [ 28.480325] Power down. [ 34s] build: extracting built packages... [ 34s] gssdp-0.14.4-1.1.i686.rpm [ 34s] gssdp-debuginfo-0.14.4-1.1.i686.rpm [ 34s] gssdp-debugsource-0.14.4-1.1.i686.rpm [ 34s] gssdp-devel-0.14.4-1.1.i686.rpm [ 34s] gssdp-0.14.4-1.1.src.rpm [ 34s] _statistics