[ 0s] Using BUILD_ROOT=/srv/build/root_6/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_6/root [ 0s] [ 0s] [ 0s] w20 started "build _service:gbs:capi-system-usbhost.spec" at Thu Jan 5 03:28:56 UTC 2017. [ 0s] [ 0s] Building capi-system-usbhost for project 'Tizen:3.0.M2:Mobile' repository 'target-TM1' arch 'armv7l' srcmd5 'd20f6cbafdc9eebf963c917a1ccdca53' [ 0s] [ 0s] processing specfile /srv/build/root_6/.build-srcdir/_service:gbs:capi-system-usbhost.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_6/.build-srcdir/_service:gbs:capi-system-usbhost.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/6/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_6/.build.rpmlist /srv/build/root_6/.build-srcdir/_service:gbs:capi-system-usbhost.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 0s] [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] Copying qemu-fix-build-hang.sh [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling setup... [ 1s] [3/40] preinstalling filesystem... [ 1s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling libgcc... [ 1s] [6/40] preinstalling bash... [ 1s] [7/40] preinstalling diffutils... [ 1s] [8/40] preinstalling grep... [ 1s] [9/40] preinstalling libattr... [ 1s] [10/40] preinstalling libbz2... [ 1s] [11/40] preinstalling libcap... [ 1s] [12/40] preinstalling libelf... [ 1s] [13/40] preinstalling libfreebl3... [ 1s] [14/40] preinstalling liblua... [ 1s] [15/40] preinstalling liblzma... [ 1s] [16/40] preinstalling libncurses... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libsmack... [ 1s] [19/40] preinstalling libsqlite... [ 1s] [20/40] preinstalling libuuid... [ 1s] [21/40] preinstalling nspr... [ 1s] [22/40] preinstalling sed... [ 1s] [23/40] preinstalling zlib... [ 1s] [24/40] preinstalling qemu-accel-x86_64-armv7l... [ 4s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 5s] [26/40] preinstalling coreutils... [ 5s] [27/40] preinstalling libacl... [ 5s] [28/40] preinstalling libblkid... [ 5s] [29/40] preinstalling libreadline... [ 5s] [30/40] preinstalling smack... [ 5s] [31/40] preinstalling bzip2... [ 5s] [32/40] preinstalling libmagic... [ 5s] [33/40] preinstalling libxml2... [ 5s] [34/40] preinstalling libmount... [ 5s] [35/40] preinstalling tar... [ 5s] [36/40] preinstalling util-linux... [ 5s] [37/40] preinstalling util-linux-su... [ 5s] [38/40] preinstalling nss... [ 5s] [39/40] preinstalling libsoftokn3... [ 5s] [40/40] preinstalling rpm... [ 5s] [ 6s] [1/9] preinstalling libext2fs... [ 6s] [2/9] preinstalling libpcre... [ 6s] [3/9] preinstalling libsmartcols... [ 6s] [4/9] preinstalling libuuid... [ 6s] [5/9] preinstalling perl... [ 6s] [6/9] preinstalling grep... [ 6s] [7/9] preinstalling libblkid... [ 6s] [8/9] preinstalling libmount... [ 6s] [9/9] preinstalling util-linux... [ 6s] copying packages... [ 7s] reordering...cycle: libsoftokn3 -> nss [ 7s] breaking dependency nss -> libsoftokn3 [ 7s] done [ 13s] booting kvm ... [ 13s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 6000 -drive file=/srv/build/root_6/root,if=virtio,cache=none -drive file=/srv/build/root_6/root,if=ide,index=0,cache=none -drive file=/srv/build/root_6/swap,if=virtio,cache=none -smp 4 [ 16s] [ 0.000000] tsc: Fast TSC calibration failed [ 17s] doing fast boot [ 18s] Creating device nodes with udev [ 37s] Waiting for device /dev/vda to appear: ok [ 37s] fsck from util-linux 2.21.2 [ 37s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 38s] /dev/vda: clean, 5033/2392064 files, 262815/9568256 blocks [ 38s] fsck succeeded. Mounting root device read-write. [ 38s] Mounting root /dev/vda [ 38s] mount -o rw -t ext4 /dev/vda /root [ 44s] replacing /etc/mtab with symlink to /proc/self/mounts [ 66s] 2nd stage started in virtual machine [ 66s] machine type: armv7l [ 68s] swapon: /dev/vdb: found signature [pagesize=4096, signature=swap] [ 68s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 68s] swapon /dev/vdb [ 69s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 77s] mount: none is already mounted or /proc busy [ 77s] mount: none is already mounted or /dev/pts busy [ 77s] logging output to //.build.log... [ 78s] processing specfile /.build-srcdir/_service:gbs:capi-system-usbhost.spec ... [ 78s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:capi-system-usbhost.spec build rpmlint-Factory ... [ 83s] running qemu-linux-user-x86_64-cross postinstall script [ 84s] running qemu-accel-x86_64-armv7l postinstall script [ 84s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/liblto_plugin.so': No such file or directory [ 84s] running setup postinstall script [ 84s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 84s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 84s] initializing rpm db... [ 99s] [1/110] installing libmagic-data-5.28-1.1 [ 100s] [2/110] installing setup-0.9-1.1 [ 102s] [3/110] installing terminfo-base-5.9-1.1 [ 102s] [4/110] installing filesystem-3.1-1.1 [ 102s] [5/110] installing glibc-2.20-1.1 [ 102s] [6/110] installing libatomic-4.9.2-1.2 [ 102s] [7/110] installing libgcc-4.9.2-1.2 [ 102s] [8/110] installing libgomp-4.9.2-1.2 [ 102s] [9/110] installing bash-3.2.57-1.1 [ 103s] [10/110] installing capi-base-common-0.4.12-1.1 [ 103s] [11/110] installing cpio-2.11-1.1 [ 103s] [12/110] installing diffutils-3.3-1.1 [ 103s] [13/110] installing findutils-4.3.8-1.1 [ 103s] [14/110] installing gdbm-1.8.3-1.1 [ 103s] [15/110] installing hostname-3.12-1.1 [ 103s] [16/110] installing iniparser-3.2-1.1 [ 103s] [17/110] installing libattr-2.4.47-1.1 [ 103s] [18/110] installing libbz2-1.0.6-1.5 [ 103s] [19/110] installing libcap-2.24-1.1 [ 103s] [20/110] installing libelf-0.153-1.5 [ 103s] [21/110] installing libexpat-2.2.0-1.1 [ 103s] [22/110] installing libext2fs-1.42.13-1.1 [ 104s] [23/110] installing libfreebl3-3.23-1.5 [ 104s] [24/110] installing libitm-4.9.2-1.2 [ 104s] [25/110] installing libltdl-2.4.2-1.1 [ 104s] [26/110] installing liblua-5.1.4-1.1 [ 104s] [27/110] installing liblzma-5.1.3-1.1 [ 104s] [28/110] installing libpcre-8.39-1.1 [ 104s] [29/110] installing libpopt-1.16-1.1 [ 104s] [30/110] installing libsmack-1.3.0-1.1 [ 104s] [31/110] installing libsmartcols-2.28-1.1 [ 104s] [32/110] installing libsqlite-3.8.10.2-1.1 [ 104s] [33/110] installing libstdc++-4.9.2-1.2 [ 104s] [34/110] installing libuuid-2.28-1.1 [ 105s] [35/110] installing m4-1.4.17-1.1 [ 105s] [36/110] installing net-tools-2.0_20121208git-1.1 [ 105s] [37/110] installing nspr-4.12-1.1 [ 105s] [38/110] installing patch-2.7-1.1 [ 105s] [39/110] installing pkg-config-0.28-1.1 [ 105s] [40/110] installing sed-4.1c-1.1 [ 105s] [41/110] installing update-alternatives-1.16.3-1.1 [ 105s] [42/110] installing which-2.20-1.1 [ 105s] [43/110] installing zlib-1.2.8-1.1 [ 105s] [44/110] installing libncurses-5.9-1.1 [ 105s] [45/110] installing shadow-utils-4.1.4.2-1.1 [ 105s] [46/110] installing build-compare-2015.04.28-1.4 [ 105s] [47/110] installing libstdc++-devel-4.9.2-1.2 [ 106s] [48/110] installing qemu-linux-user-x86_64-cross-2.7.0-1.2.1 [ 107s] [49/110] installing capi-base-common-devel-0.4.12-1.1 [ 107s] [50/110] installing cpp-4.9.2-1.2 [ 108s] [51/110] installing gcc-c++-4.9.2-1.2 [ 108s] [52/110] installing binutils-2.25-1.2 [ 109s] [53/110] installing coreutils-6.9-1.1 [ 109s] [54/110] installing db4-4.8.30.NC-1.1 [ 109s] [55/110] installing gawk-3.1.5-1.1 [ 109s] [56/110] installing grep-2.5.2-1.1 [ 109s] [57/110] installing less-466-1.1 [ 109s] [58/110] installing libacl-2.2.52-1.1 [ 109s] [59/110] installing libasm-0.153-1.5 [ 109s] [60/110] installing libblkid-2.28-1.1 [ 109s] [61/110] installing libcap-tools-2.24-1.1 [ 109s] [62/110] installing libglib-2.44.1-1.1 [ 109s] [63/110] installing libopenssl-1.0.2j-1.1 [ 110s] [64/110] installing libreadline-5.2-1.1 [ 110s] [65/110] installing libubsan-4.9.2-1.2 [ 110s] [66/110] installing make-4.0-1.1 [ 110s] [67/110] installing nss-certs-3.23-1.5 [ 110s] [68/110] installing smack-1.3.0-1.1 [ 110s] [69/110] installing bzip2-1.0.6-1.5 [ 111s] [70/110] installing libmagic-5.28-1.1 [ 111s] [71/110] installing libxml2-2.9.4-1.1 [ 111s] [72/110] installing xz-5.1.3-1.1 [ 111s] [73/110] installing libdw-0.153-1.5 [ 112s] [74/110] installing linux-glibc-devel-3.10-1.1 [ 112s] [75/110] installing file-5.28-1.1 [ 112s] [76/110] installing glibc-locale-2.20-1.1 [ 112s] [77/110] installing libmount-2.28-1.1 [ 113s] [78/110] installing security-config-1.0-1.1 [ 118s] usermod: user 'buxton' does not exist [ 118s] usermod: user 'dbus' does not exist [ 118s] [79/110] installing tar-1.17-1.1 [ 119s] [80/110] installing gzip-1.3.12-1.1 [ 119s] [81/110] installing libfdisk1-2.28-1.1 [ 119s] [82/110] installing pam-1.1.6-1.1 [ 119s] [83/110] installing perl-5.20.0-1.5 [ 121s] [84/110] installing tzdata-2016i-1.1 [ 122s] [85/110] installing elfutils-0.153-1.5 [ 122s] [86/110] installing gcc-4.9.2-1.2 [ 123s] [87/110] installing libarchive-3.1.2-1.1 [ 124s] [88/110] installing build-mkbaselibs-20120927-1.1 [ 124s] [89/110] installing glibc-devel-2.20-1.1 [ 124s] [90/110] installing qemu-accel-x86_64-armv7l-0.4-1.2 [ 152s] [91/110] installing autoconf-2.69-1.1 [ 153s] [92/110] installing libsystemd-219-1.1 [ 153s] [93/110] installing cmake-2.8.12.2-1.1 [ 154s] [94/110] installing util-linux-2.28-1.1 [ 156s] [95/110] installing libattr-devel-2.4.47-1.1 [ 156s] [96/110] installing automake-1.14.1-1.1 [ 158s] [97/110] installing dbus-libs-1.10.6-1.1 [ 158s] [98/110] installing util-linux-su-2.28-1.1 [ 158s] [99/110] installing build-20120927-1.1 [ 159s] [100/110] installing libdlog-0.5.1-1.1 [ 160s] [101/110] installing libdlog-devel-0.5.1-1.1 [ 160s] [102/110] installing libtool-2.4.2-1.1 [ 160s] [103/110] installing libusb-1.0.19-1.1 [ 160s] [104/110] installing capi-system-info-0.2.0-1.1 [ 161s] [105/110] installing capi-system-info-devel-0.2.0-1.1 [ 161s] [106/110] installing libusb-devel-1.0.19-1.1 [ 161s] [107/110] installing nss-3.23-1.5 [ 161s] [108/110] installing libsoftokn3-3.23-1.5 [ 162s] [109/110] installing rpm-4.11.0.1-1.1 [ 162s] [110/110] installing rpm-build-4.11.0.1-1.1 [ 162s] removing nis flags from //etc/nsswitch.conf... [ 162s] now finalizing build dir... [ 168s] build target is armv7l-tizen-linux [ 168s] ----------------------------------------------------------------- [ 168s] I have the following modifications for capi-system-usbhost.spec: [ 168s] 4c4 [ 168s] < Release: 1 [ 168s] --- [ 168s] > Release: 1.1 [ 168s] ----------------------------------------------------------------- [ 168s] ----- building capi-system-usbhost.spec (user abuild) [ 168s] ----------------------------------------------------------------- [ 168s] ----------------------------------------------------------------- [ 168s] Running qemu build hang workaround... [ 169s] /bin/ps command not found [ 169s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0.M2:Mobile/target-TM1/d20f6cbafdc9eebf963c917a1ccdca53-capi-system-usbhost' /home/abuild/rpmbuild/SOURCES/capi-system-usbhost.spec [ 169s] Building target platforms: armv7l-tizen-linux [ 169s] Building for target armv7l-tizen-linux [ 169s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.GPha5N [ 169s] + umask 022 [ 169s] + cd /home/abuild/rpmbuild/BUILD [ 169s] + cd /home/abuild/rpmbuild/BUILD [ 169s] + rm -rf capi-system-usbhost-0.0.1 [ 169s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/capi-system-usbhost-0.0.1.tar.gz [ 169s] + /bin/tar -xf - [ 169s] + STATUS=0 [ 169s] + '[' 0 -ne 0 ']' [ 169s] + cd capi-system-usbhost-0.0.1 [ 169s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 169s] + cp /home/abuild/rpmbuild/SOURCES/capi-system-usbhost.manifest . [ 169s] + exit 0 [ 169s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.SU9fef [ 169s] + umask 022 [ 169s] + cd /home/abuild/rpmbuild/BUILD [ 169s] + cd capi-system-usbhost-0.0.1 [ 169s] ++ uname -m [ 169s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 169s] + LANG=C [ 169s] + export LANG [ 169s] + unset DISPLAY [ 169s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 169s] + export CFLAGS [ 169s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 169s] + export CXXFLAGS [ 169s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 169s] + export FFLAGS [ 169s] + LDFLAGS= [ 169s] + export LDFLAGS [ 169s] + LD_AS_NEEDED=1 [ 169s] + export LD_AS_NEEDED [ 169s] + export 'LDFLAGS= -Wl,--rpath=/usr/lib' [ 169s] + LDFLAGS=' -Wl,--rpath=/usr/lib' [ 169s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 169s] + export CFLAGS [ 169s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 169s] + export CXXFLAGS [ 169s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 169s] + export FFLAGS [ 169s] + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON . -DVERSION=0.0.1 -DCMAKE_BUILD_TYPE=RELEASE -DCMAKE_VERBOSE_MAKEFILE=ON [ 169s] -- The C compiler identification is GNU 4.9.2 [ 169s] -- The CXX compiler identification is GNU 4.9.2 [ 169s] -- Check for working C compiler: /usr/bin/cc [ 169s] -- Check for working C compiler: /usr/bin/cc -- works [ 169s] -- Detecting C compiler ABI info [ 169s] -- Detecting C compiler ABI info - done [ 169s] -- Check for working CXX compiler: /usr/bin/c++ [ 169s] -- Check for working CXX compiler: /usr/bin/c++ -- works [ 169s] -- Detecting CXX compiler ABI info [ 170s] -- Detecting CXX compiler ABI info - done [ 170s] -- Found PkgConfig: /usr/bin/pkg-config (found version "0.28") [ 170s] -- checking for modules 'libusb-1.0;dlog;capi-system-info' [ 170s] -- found libusb-1.0, version 1.0.19 [ 170s] -- found dlog, version 1.0 [ 170s] -- found capi-system-info, version 0.2.0 [ 171s] -- Configuring done [ 171s] -- Generating done [ 171s] CMake Warning: [ 171s] Manually-specified variables were not used by the project: [ 171s] [ 171s] CMAKE_INSTALL_LIBDIR [ 171s] INCLUDE_INSTALL_DIR [ 171s] SHARE_INSTALL_PREFIX [ 171s] SYSCONF_INSTALL_DIR [ 171s] [ 171s] [ 171s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1 [ 171s] + /bin/make -j4 [ 171s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1 -B/home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1 --check-build-system CMakeFiles/Makefile.cmake 0 [ 171s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1/CMakeFiles /home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1/CMakeFiles/progress.marks [ 171s] /bin/make -f CMakeFiles/Makefile2 all [ 171s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1' [ 171s] /bin/make -f CMakeFiles/capi-system-usbhost.dir/build.make CMakeFiles/capi-system-usbhost.dir/depend [ 171s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1' [ 171s] cd /home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1 /home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1 /home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1 /home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1 /home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1/CMakeFiles/capi-system-usbhost.dir/DependInfo.cmake --color= [ 171s] Scanning dependencies of target capi-system-usbhost [ 171s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1' [ 171s] /bin/make -f CMakeFiles/capi-system-usbhost.dir/build.make CMakeFiles/capi-system-usbhost.dir/build [ 171s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1' [ 171s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1/CMakeFiles 1 [ 171s] [100%] Building C object CMakeFiles/capi-system-usbhost.dir/src/usb_host.c.o [ 171s] /usr/bin/cc -Dcapi_system_usbhost_EXPORTS -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I/usr/include/libusb-1.0 -I/usr/include/dlog -I/usr/include/system -g -O0 -Wall -O3 -DNDEBUG -fPIC -I/home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1 -I/home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1/include -o CMakeFiles/capi-system-usbhost.dir/src/usb_host.c.o -c /home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1/src/usb_host.c [ 171s] Linking C shared library libcapi-system-usbhost.so [ 171s] /usr/bin/cmake -E cmake_link_script CMakeFiles/capi-system-usbhost.dir/link.txt --verbose=1 [ 171s] /usr/bin/cc -fPIC -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I/usr/include/libusb-1.0 -I/usr/include/dlog -I/usr/include/system -g -O0 -Wall -O3 -DNDEBUG -Wl,--rpath=/usr/lib -shared -Wl,-soname,libcapi-system-usbhost.so.0 -o libcapi-system-usbhost.so.0.1.0 CMakeFiles/capi-system-usbhost.dir/src/usb_host.c.o -lusb-1.0 -ldlog -lcapi-system-info -lcapi-base-common -ldl [ 171s] /usr/bin/cmake -E cmake_symlink_library libcapi-system-usbhost.so.0.1.0 libcapi-system-usbhost.so.0 libcapi-system-usbhost.so [ 171s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1' [ 171s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1/CMakeFiles 1 [ 171s] [100%] Built target capi-system-usbhost [ 171s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1' [ 171s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1/CMakeFiles 0 [ 171s] + ctest -V [ 171s] UpdateCTestConfiguration from :/home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1/DartConfiguration.tcl [ 171s] UpdateCTestConfiguration from :/home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1/DartConfiguration.tcl [ 171s] Test project /home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1 [ 171s] Constructing a list of tests [ 171s] Checking test dependency graph... [ 171s] Checking test dependency graph end [ 171s] No tests were found!!! [ 171s] + exit 0 [ 171s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.KoikbQ [ 171s] + umask 022 [ 171s] + cd /home/abuild/rpmbuild/BUILD [ 171s] + cd capi-system-usbhost-0.0.1 [ 171s] + LANG=C [ 171s] + export LANG [ 171s] + unset DISPLAY [ 171s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-usbhost-0.0.1-1.1.arm [ 171s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-system-usbhost-0.0.1-1.1.arm [ 171s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-usbhost-0.0.1-1.1.arm [ 171s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/capi-system-usbhost-0.0.1-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/capi-system-usbhost-0.0.1-1.1.arm install [ 171s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1 -B/home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1 --check-build-system CMakeFiles/Makefile.cmake 0 [ 171s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1/CMakeFiles /home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1/CMakeFiles/progress.marks [ 171s] /bin/make -f CMakeFiles/Makefile2 all [ 171s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1' [ 171s] /bin/make -f CMakeFiles/capi-system-usbhost.dir/build.make CMakeFiles/capi-system-usbhost.dir/depend [ 171s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1' [ 171s] cd /home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1 /home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1 /home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1 /home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1 /home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1/CMakeFiles/capi-system-usbhost.dir/DependInfo.cmake --color= [ 171s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1' [ 171s] /bin/make -f CMakeFiles/capi-system-usbhost.dir/build.make CMakeFiles/capi-system-usbhost.dir/build [ 171s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1' [ 171s] make[2]: Nothing to be done for 'CMakeFiles/capi-system-usbhost.dir/build'. [ 171s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1' [ 171s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1/CMakeFiles 1 [ 171s] [100%] Built target capi-system-usbhost [ 171s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1' [ 171s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1/CMakeFiles 0 [ 171s] /bin/make -f CMakeFiles/Makefile2 preinstall [ 171s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1' [ 171s] make[1]: Nothing to be done for 'preinstall'. [ 171s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1' [ 171s] Install the project... [ 171s] /usr/bin/cmake -P cmake_install.cmake [ 171s] -- Install configuration: "RELEASE" [ 171s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-usbhost-0.0.1-1.1.arm/usr/include/usb_host.h [ 171s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-usbhost-0.0.1-1.1.arm/usr/lib/udev/rules.d/40-usb.rules [ 171s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-usbhost-0.0.1-1.1.arm/usr/lib/libcapi-system-usbhost.so.0.1.0 [ 171s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-usbhost-0.0.1-1.1.arm/usr/lib/libcapi-system-usbhost.so.0 [ 171s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-usbhost-0.0.1-1.1.arm/usr/lib/libcapi-system-usbhost.so [ 171s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-usbhost-0.0.1-1.1.arm/usr/lib/pkgconfig/capi-system-usbhost.pc [ 171s] + rm -f /home/abuild/rpmbuild/BUILDROOT/capi-system-usbhost-0.0.1-1.1.arm/usr/share/info/dir [ 171s] + find /home/abuild/rpmbuild/BUILDROOT/capi-system-usbhost-0.0.1-1.1.arm -regex '.*\.la$' [ 171s] + xargs rm -f -- [ 171s] + find /home/abuild/rpmbuild/BUILDROOT/capi-system-usbhost-0.0.1-1.1.arm -regex '.*\.a$' [ 171s] + xargs rm -f -- [ 171s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/capi-system-usbhost-0.0.1 [ 172s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/capi-system-usbhost-0.0.1-1.1.arm/usr/lib/libcapi-system-usbhost.so.0.1.0 [ 172s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 172s] cpio: glibc-2.20/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 172s] cpio: glibc-2.20/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 172s] 169 blocks [ 172s] + /usr/lib/rpm/check-buildroot [ 172s] + /usr/lib/rpm//brp-compress [ 172s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 172s] + /usr/lib/rpm/brp-python-hardlink [ 172s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/capi-system-usbhost-0.0.1-1.1.arm [ 172s] Processing files: capi-system-usbhost-0.0.1-1.1.armv7l [ 172s] Aptk: PG1hbmlmZXN0PgogIDxyZXF1ZXN0PgogICAgIDxkb21haW4gbmFtZT0iXyIvPgog [ 172s] IDwvcmVxdWVzdD4KPC9tYW5pZmVzdD4KCg== [ 172s] [ 172s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.sI4fPs [ 172s] + umask 022 [ 172s] + cd /home/abuild/rpmbuild/BUILD [ 172s] + cd capi-system-usbhost-0.0.1 [ 172s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/capi-system-usbhost-0.0.1-1.1.arm/usr/share/licenses/capi-system-usbhost [ 172s] + export LICENSEDIR [ 172s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-system-usbhost-0.0.1-1.1.arm/usr/share/licenses/capi-system-usbhost [ 172s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/capi-system-usbhost-0.0.1-1.1.arm/usr/share/licenses/capi-system-usbhost [ 172s] + exit 0 [ 172s] warning: File listed twice: /usr/lib/libcapi-system-usbhost.so.0.1.0 [ 172s] Provides: capi-system-usbhost = 0.0.1-1.1 capi-system-usbhost(armv7l-32) = 0.0.1-1.1 libcapi-system-usbhost.so.0 [ 172s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 172s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 172s] Requires(post): /sbin/ldconfig [ 172s] Requires(postun): /sbin/ldconfig [ 172s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libcapi-system-info.so.0 libdlog.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libusb-1.0.so.0 rtld(GNU_HASH) [ 172s] Processing files: capi-system-usbhost-debugsource-0.0.1-1.1.armv7l [ 172s] Provides: capi-system-usbhost-debugsource = 0.0.1-1.1 capi-system-usbhost-debugsource(armv7l-32) = 0.0.1-1.1 [ 172s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 172s] Processing files: capi-system-usbhost-devel-0.0.1-1.1.armv7l [ 172s] Aptk: PG1hbmlmZXN0PgogIDxyZXF1ZXN0PgogICAgIDxkb21haW4gbmFtZT0iXyIvPgog [ 172s] IDwvcmVxdWVzdD4KPC9tYW5pZmVzdD4KCg== [ 172s] [ 172s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.5zIGE5 [ 172s] + umask 022 [ 172s] + cd /home/abuild/rpmbuild/BUILD [ 172s] + cd capi-system-usbhost-0.0.1 [ 172s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/capi-system-usbhost-0.0.1-1.1.arm/usr/share/licenses/capi-system-usbhost-devel [ 172s] + export LICENSEDIR [ 172s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-system-usbhost-0.0.1-1.1.arm/usr/share/licenses/capi-system-usbhost-devel [ 172s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/capi-system-usbhost-0.0.1-1.1.arm/usr/share/licenses/capi-system-usbhost-devel [ 172s] + exit 0 [ 172s] Provides: capi-system-usbhost-devel = 0.0.1-1.1 capi-system-usbhost-devel(armv7l-32) = 0.0.1-1.1 pkgconfig(capi-system-usbhost) = 0.0.1 [ 172s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 172s] Requires: /usr/bin/pkg-config libcapi-system-usbhost.so.0 [ 172s] Processing files: capi-system-usbhost-debuginfo-0.0.1-1.1.armv7l [ 172s] Provides: capi-system-usbhost-debuginfo = 0.0.1-1.1 capi-system-usbhost-debuginfo(armv7l-32) = 0.0.1-1.1 [ 172s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 172s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/capi-system-usbhost-0.0.1-1.1.arm [ 172s] warning: Could not canonicalize hostname: w20 [ 172s] Wrote: /home/abuild/rpmbuild/SRPMS/capi-system-usbhost-0.0.1-1.1.src.rpm [ 172s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-usbhost-0.0.1-1.1.armv7l.rpm [ 172s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-usbhost-debugsource-0.0.1-1.1.armv7l.rpm [ 172s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-usbhost-devel-0.0.1-1.1.armv7l.rpm [ 172s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-usbhost-debuginfo-0.0.1-1.1.armv7l.rpm [ 172s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.dWjeZX [ 172s] + umask 022 [ 172s] + cd /home/abuild/rpmbuild/BUILD [ 172s] + cd capi-system-usbhost-0.0.1 [ 172s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-usbhost-0.0.1-1.1.arm [ 172s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-usbhost-0.0.1-1.1.arm [ 172s] + exit 0 [ 172s] ... checking for files with abuild user/group [ 172s] ... creating baselibs [ 174s] ... saving built statistics [ 174s] ... saving built packages [ 174s] /home/abuild/rpmbuild/RPMS/armv7l/capi-system-usbhost-0.0.1-1.1.armv7l.rpm [ 174s] /home/abuild/rpmbuild/RPMS/armv7l/capi-system-usbhost-debuginfo-0.0.1-1.1.armv7l.rpm [ 174s] /home/abuild/rpmbuild/RPMS/armv7l/capi-system-usbhost-debugsource-0.0.1-1.1.armv7l.rpm [ 174s] /home/abuild/rpmbuild/RPMS/armv7l/capi-system-usbhost-devel-0.0.1-1.1.armv7l.rpm [ 174s] /home/abuild/rpmbuild/SRPMS/capi-system-usbhost-0.0.1-1.1.src.rpm [ 174s] /home/abuild/rpmbuild/OTHER/_statistics [ 174s] [ 174s] w20 finished "build capi-system-usbhost.spec" at Thu Jan 5 03:31:50 UTC 2017. [ 174s] [ 178s] [ 161.469528] SysRq : Power Off [ 178s] [ 161.680292] Power down. [ 179s] build: extracting built packages... [ 179s] capi-system-usbhost-0.0.1-1.1.armv7l.rpm [ 179s] capi-system-usbhost-debuginfo-0.0.1-1.1.armv7l.rpm [ 179s] capi-system-usbhost-debugsource-0.0.1-1.1.armv7l.rpm [ 179s] capi-system-usbhost-devel-0.0.1-1.1.armv7l.rpm [ 179s] capi-system-usbhost-0.0.1-1.1.src.rpm [ 179s] _statistics