[ 0s] Using BUILD_ROOT=/srv/build/root_4/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_4/root [ 0s] [ 0s] [ 0s] w33 started "build _service:gbs:data-router.spec" at Thu Jan 5 03:28:17 UTC 2017. [ 0s] [ 0s] Building data-router for project 'Tizen:3.0.M2:Mobile' repository 'target-TM1' arch 'armv7l' srcmd5 'dbbe0e1dac8def29100480bff6c99123' [ 0s] [ 0s] processing specfile /srv/build/root_4/.build-srcdir/_service:gbs:data-router.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_4/.build-srcdir/_service:gbs:data-router.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/4/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_4/.build.rpmlist /srv/build/root_4/.build-srcdir/_service:gbs:data-router.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 0s] [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] Copying qemu-fix-build-hang.sh [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/40] preinstalling libmagic-data... [ 0s] [2/40] preinstalling setup... [ 0s] [3/40] preinstalling filesystem... [ 0s] [4/40] preinstalling glibc... [ 0s] [5/40] preinstalling libgcc... [ 0s] [6/40] preinstalling bash... [ 0s] [7/40] preinstalling diffutils... [ 0s] [8/40] preinstalling grep... [ 0s] [9/40] preinstalling libattr... [ 0s] [10/40] preinstalling libbz2... [ 0s] [11/40] preinstalling libcap... [ 0s] [12/40] preinstalling libelf... [ 0s] [13/40] preinstalling libfreebl3... [ 0s] [14/40] preinstalling liblua... [ 0s] [15/40] preinstalling liblzma... [ 0s] [16/40] preinstalling libncurses... [ 0s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libsmack... [ 1s] [19/40] preinstalling libsqlite... [ 1s] [20/40] preinstalling libuuid... [ 1s] [21/40] preinstalling nspr... [ 1s] [22/40] preinstalling sed... [ 1s] [23/40] preinstalling zlib... [ 1s] [24/40] preinstalling qemu-accel-x86_64-armv7l... [ 3s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 4s] [26/40] preinstalling coreutils... [ 4s] [27/40] preinstalling libacl... [ 4s] [28/40] preinstalling libblkid... [ 4s] [29/40] preinstalling libreadline... [ 4s] [30/40] preinstalling smack... [ 4s] [31/40] preinstalling bzip2... [ 4s] [32/40] preinstalling libmagic... [ 4s] [33/40] preinstalling libxml2... [ 4s] [34/40] preinstalling libmount... [ 4s] [35/40] preinstalling tar... [ 4s] [36/40] preinstalling util-linux... [ 4s] [37/40] preinstalling util-linux-su... [ 4s] [38/40] preinstalling nss... [ 4s] [39/40] preinstalling libsoftokn3... [ 4s] [40/40] preinstalling rpm... [ 4s] [ 4s] [1/9] preinstalling libext2fs... [ 4s] [2/9] preinstalling libpcre... [ 5s] [3/9] preinstalling libsmartcols... [ 5s] [4/9] preinstalling libuuid... [ 5s] [5/9] preinstalling perl... [ 5s] [6/9] preinstalling grep... [ 5s] [7/9] preinstalling libblkid... [ 5s] [8/9] preinstalling libmount... [ 5s] [9/9] preinstalling util-linux... [ 5s] copying packages... [ 6s] reordering...cycle: gio-branding-upstream -> libgio [ 6s] breaking dependency libgio -> gio-branding-upstream [ 6s] cycle: vconf-compat -> buxton2 [ 6s] breaking dependency buxton2 -> vconf-compat [ 6s] cycle: libsoftokn3 -> nss [ 6s] breaking dependency nss -> libsoftokn3 [ 6s] done [ 6s] booting kvm ... [ 6s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 6000 -drive file=/srv/build/root_4/root,if=virtio,cache=none -drive file=/srv/build/root_4/root,if=ide,index=0,cache=none -drive file=/srv/build/root_4/swap,if=virtio,cache=none -smp 4 [ 9s] [ 0.000000] tsc: Fast TSC calibration failed [ 10s] doing fast boot [ 10s] Creating device nodes with udev [ 10s] Waiting for device /dev/vda to appear: ok [ 10s] fsck from util-linux 2.21.2 [ 10s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 10s] /dev/vda: clean, 5073/2392064 files, 264515/9568256 blocks [ 10s] fsck succeeded. Mounting root device read-write. [ 10s] Mounting root /dev/vda [ 10s] mount -o rw -t ext4 /dev/vda /root [ 10s] replacing /etc/mtab with symlink to /proc/self/mounts [ 11s] 2nd stage started in virtual machine [ 11s] machine type: armv7l [ 11s] swapon: /dev/vdb: found signature [pagesize=4096, signature=swap] [ 11s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 11s] swapon /dev/vdb [ 11s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 11s] mount: none is already mounted or /proc busy [ 11s] mount: none is already mounted or /dev/pts busy [ 11s] logging output to //.build.log... [ 11s] processing specfile /.build-srcdir/_service:gbs:data-router.spec ... [ 11s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:data-router.spec build rpmlint-Factory ... [ 12s] running qemu-linux-user-x86_64-cross postinstall script [ 12s] running qemu-accel-x86_64-armv7l postinstall script [ 12s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/liblto_plugin.so': No such file or directory [ 12s] running setup postinstall script [ 12s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 12s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 12s] initializing rpm db... [ 14s] [1/129] installing default-ac-domains-0.1-1.1 [ 14s] [2/129] installing libmagic-data-5.28-1.1 [ 14s] [3/129] installing setup-0.9-1.1 [ 14s] [4/129] installing terminfo-base-5.9-1.1 [ 15s] [5/129] installing filesystem-3.1-1.1 [ 15s] [6/129] installing glibc-2.20-1.1 [ 15s] [7/129] installing libatomic-4.9.2-1.2 [ 15s] [8/129] installing libgcc-4.9.2-1.2 [ 15s] [9/129] installing libgomp-4.9.2-1.2 [ 15s] [10/129] installing bash-3.2.57-1.1 [ 16s] [11/129] installing capi-base-common-0.4.12-1.1 [ 16s] [12/129] installing cpio-2.11-1.1 [ 16s] [13/129] installing diffutils-3.3-1.1 [ 16s] [14/129] installing findutils-4.3.8-1.1 [ 16s] [15/129] installing gdbm-1.8.3-1.1 [ 16s] [16/129] installing hostname-3.12-1.1 [ 16s] [17/129] installing libattr-2.4.47-1.1 [ 16s] [18/129] installing libbz2-1.0.6-1.5 [ 16s] [19/129] installing libcap-2.24-1.1 [ 16s] [20/129] installing libelf-0.153-1.5 [ 16s] [21/129] installing libelf0-0.8.13-1.1 [ 16s] [22/129] installing libexpat-2.2.0-1.1 [ 17s] [23/129] installing libext2fs-1.42.13-1.1 [ 17s] [24/129] installing libffi-3.1-1.1 [ 17s] [25/129] installing libfreebl3-3.23-1.5 [ 17s] [26/129] installing libitm-4.9.2-1.2 [ 17s] [27/129] installing libltdl-2.4.2-1.1 [ 17s] [28/129] installing liblua-5.1.4-1.1 [ 17s] [29/129] installing liblzma-5.1.3-1.1 [ 17s] [30/129] installing libpcre-8.39-1.1 [ 17s] [31/129] installing libpopt-1.16-1.1 [ 18s] [32/129] installing libpython-2.7.8-1.2 [ 18s] [33/129] installing libsmack-1.3.0-1.1 [ 18s] [34/129] installing libsmartcols-2.28-1.1 [ 18s] [35/129] installing libsqlite-3.8.10.2-1.1 [ 18s] [36/129] installing libstdc++-4.9.2-1.2 [ 18s] [37/129] installing libuuid-2.28-1.1 [ 18s] [38/129] installing m4-1.4.17-1.1 [ 19s] [39/129] installing net-tools-2.0_20121208git-1.1 [ 19s] [40/129] installing nspr-4.12-1.1 [ 19s] [41/129] installing patch-2.7-1.1 [ 19s] [42/129] installing pkg-config-0.28-1.1 [ 19s] [43/129] installing sed-4.1c-1.1 [ 19s] [44/129] installing update-alternatives-1.16.3-1.1 [ 19s] [45/129] installing which-2.20-1.1 [ 19s] [46/129] installing zlib-1.2.8-1.1 [ 19s] [47/129] installing libncurses-5.9-1.1 [ 20s] [48/129] installing shadow-utils-4.1.4.2-1.1 [ 20s] [49/129] installing build-compare-2015.04.28-1.4 [ 20s] [50/129] installing libstdc++-devel-4.9.2-1.2 [ 20s] [51/129] installing qemu-linux-user-x86_64-cross-2.7.0-1.2.1 [ 21s] [52/129] installing capi-base-common-devel-0.4.12-1.1 [ 21s] [53/129] installing cpp-4.9.2-1.2 [ 22s] [54/129] installing gcc-c++-4.9.2-1.2 [ 23s] [55/129] installing binutils-2.25-1.2 [ 23s] [56/129] installing coreutils-6.9-1.1 [ 23s] [57/129] installing db4-4.8.30.NC-1.1 [ 24s] [58/129] installing gawk-3.1.5-1.1 [ 24s] [59/129] installing grep-2.5.2-1.1 [ 24s] [60/129] installing less-466-1.1 [ 24s] [61/129] installing libacl-2.2.52-1.1 [ 24s] [62/129] installing libasm-0.153-1.5 [ 24s] [63/129] installing libblkid-2.28-1.1 [ 24s] [64/129] installing libglib-2.44.1-1.1 [ 25s] [65/129] installing libopenssl-1.0.2j-1.1 [ 25s] [66/129] installing libpcreposix-8.39-1.1 [ 25s] [67/129] installing libreadline-5.2-1.1 [ 25s] [68/129] installing libubsan-4.9.2-1.2 [ 25s] [69/129] installing make-4.0-1.1 [ 25s] [70/129] installing nss-certs-3.23-1.5 [ 25s] [71/129] installing smack-1.3.0-1.1 [ 26s] [72/129] installing bzip2-1.0.6-1.5 [ 26s] [73/129] installing libmagic-5.28-1.1 [ 26s] [74/129] installing libpcrecpp-8.39-1.1 [ 26s] [75/129] installing libxml2-2.9.4-1.1 [ 26s] [76/129] installing xz-5.1.3-1.1 [ 26s] [77/129] installing cynara-db-migration-0.14.6-1.1 [ 26s] [78/129] installing libdw-0.153-1.5 [ 26s] [79/129] installing linux-glibc-devel-3.10-1.1 [ 27s] [80/129] installing vconf-internal-keys-devel-0.0.159-1.1 [ 27s] [81/129] installing file-5.28-1.1 [ 27s] [82/129] installing glibc-locale-2.20-1.1 [ 27s] [83/129] installing libgmodule-2.44.1-1.1 [ 27s] [84/129] installing libgthread-2.44.1-1.1 [ 27s] [85/129] installing libmount-2.28-1.1 [ 27s] [86/129] installing tar-1.17-1.1 [ 27s] [87/129] installing gzip-1.3.12-1.1 [ 27s] [88/129] installing libfdisk1-2.28-1.1 [ 27s] [89/129] installing libgobject-2.44.1-1.1 [ 28s] [90/129] installing pam-1.1.6-1.1 [ 28s] [91/129] installing perl-5.20.0-1.5 [ 29s] [92/129] installing tzdata-2016i-1.1 [ 29s] [93/129] installing pcre-devel-8.39-1.1 [ 29s] [94/129] installing elfutils-0.153-1.5 [ 29s] [95/129] installing gcc-4.9.2-1.2 [ 30s] [96/129] installing libcynara-commons-0.14.6-1.1 [ 30s] [97/129] installing shared-mime-info-1.3-1.1 [ 35s] [98/129] installing libarchive-3.1.2-1.1 [ 35s] [99/129] installing python-2.7.8-1.2 [ 36s] [100/129] installing build-mkbaselibs-20120927-1.1 [ 36s] [101/129] installing glibc-devel-2.20-1.1 [ 36s] [102/129] installing qemu-accel-x86_64-armv7l-0.4-1.2 [ 39s] [103/129] installing autoconf-2.69-1.1 [ 39s] [104/129] installing libcynara-client-0.14.6-1.1 [ 39s] [105/129] installing python-xml-2.7.8-1.2 [ 39s] [106/129] installing libsystemd-219-1.1 [ 40s] [107/129] installing cmake-2.8.12.2-1.1 [ 40s] [108/129] installing util-linux-2.28-1.1 [ 40s] [109/129] installing automake-1.14.1-1.1 [ 40s] [110/129] installing dbus-libs-1.10.6-1.1 [ 40s] [111/129] installing util-linux-su-2.28-1.1 [ 40s] [112/129] installing build-20120927-1.1 [ 40s] [113/129] installing libdlog-0.5.1-1.1 [ 40s] [114/129] installing dbus-devel-1.10.6-1.1 [ 40s] [115/129] installing libdlog-devel-0.5.1-1.1 [ 41s] [116/129] installing libtool-2.4.2-1.1 [ 41s] [117/129] installing nss-3.23-1.5 [ 41s] [118/129] installing libgio-2.44.1-1.1 [ 41s] [119/129] installing gio-branding-upstream-2.44.1-1.1 [ 41s] [120/129] installing dbus-glib-0.100.2-1.1 [ 41s] [121/129] installing libsoftokn3-3.23-1.5 [ 41s] [122/129] installing glib2-tools-2.44.1-1.1 [ 41s] [123/129] installing rpm-4.11.0.1-1.1 [ 41s] [124/129] installing buxton2-1.1-1.1 [ 42s] warning: user buxton does not exist - using root [ 42s] warning: group buxton does not exist - using root [ 42s] warning: user buxton does not exist - using root [ 42s] warning: group buxton does not exist - using root [ 42s] chmod: cannot access `/etc/buxton2/*': No such file or directory [ 42s] /etc/buxton2/*: No such file or directory [ 42s] [125/129] installing vconf-compat-1.1-1.1 [ 42s] [126/129] installing glib2-devel-2.44.1-1.1 [ 42s] [127/129] installing rpm-build-4.11.0.1-1.1 [ 43s] [128/129] installing vconf-compat-devel-1.1-1.1 [ 43s] [129/129] installing dbus-glib-devel-0.100.2-1.1 [ 43s] removing nis flags from //etc/nsswitch.conf... [ 43s] now finalizing build dir... [ 49s] build target is armv7l-tizen-linux [ 49s] ----------------------------------------------------------------- [ 49s] I have the following modifications for data-router.spec: [ 49s] 5c5 [ 49s] < Release: 1 [ 49s] --- [ 49s] > Release: 1.1 [ 49s] 40a41 [ 49s] > %changelog [ 49s] ----------------------------------------------------------------- [ 49s] ----- building data-router.spec (user abuild) [ 49s] ----------------------------------------------------------------- [ 49s] ----------------------------------------------------------------- [ 49s] Running qemu build hang workaround... [ 49s] /bin/ps command not found [ 49s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0.M2:Mobile/target-TM1/dbbe0e1dac8def29100480bff6c99123-data-router' /home/abuild/rpmbuild/SOURCES/data-router.spec [ 49s] Building target platforms: armv7l-tizen-linux [ 49s] Building for target armv7l-tizen-linux [ 49s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.YdjrgP [ 49s] + umask 022 [ 49s] + cd /home/abuild/rpmbuild/BUILD [ 49s] + cd /home/abuild/rpmbuild/BUILD [ 49s] + rm -rf data-router-0.2.18 [ 49s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/data-router-0.2.18.tar.gz [ 49s] + /bin/tar -xf - [ 49s] + STATUS=0 [ 49s] + '[' 0 -ne 0 ']' [ 49s] + cd data-router-0.2.18 [ 49s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 49s] + cp /home/abuild/rpmbuild/SOURCES/data-router.manifest . [ 49s] + exit 0 [ 49s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.EjAnYq [ 49s] + umask 022 [ 49s] + cd /home/abuild/rpmbuild/BUILD [ 49s] + cd data-router-0.2.18 [ 49s] ++ uname -m [ 49s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 49s] + LANG=C [ 49s] + export LANG [ 49s] + unset DISPLAY [ 49s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 49s] + export CFLAGS [ 49s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 49s] + export CXXFLAGS [ 49s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 49s] + export FFLAGS [ 49s] + LDFLAGS= [ 49s] + export LDFLAGS [ 49s] + LD_AS_NEEDED=1 [ 49s] + export LD_AS_NEEDED [ 49s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 49s] + export CFLAGS [ 49s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 49s] + export CXXFLAGS [ 49s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 49s] + export FFLAGS [ 49s] + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON . [ 49s] -- The C compiler identification is GNU 4.9.2 [ 49s] -- Check for working C compiler: /usr/bin/cc [ 49s] -- Check for working C compiler: /usr/bin/cc -- works [ 49s] -- Detecting C compiler ABI info [ 49s] -- Detecting C compiler ABI info - done [ 49s] -- Found PkgConfig: /usr/bin/pkg-config (found version "0.28") [ 49s] -- checking for modules 'glib-2.0;dbus-glib-1;dlog;vconf' [ 50s] -- found glib-2.0, version 2.44.1 [ 50s] -- found dbus-glib-1, version 0.100.2 [ 50s] -- found dlog, version 1.0 [ 50s] -- found vconf, version 0.3.1 [ 51s] -- Configuring done [ 51s] -- Generating done [ 51s] CMake Warning: [ 51s] Manually-specified variables were not used by the project: [ 51s] [ 51s] BUILD_SHARED_LIBS [ 51s] CMAKE_INSTALL_LIBDIR [ 51s] INCLUDE_INSTALL_DIR [ 51s] LIB_INSTALL_DIR [ 51s] SHARE_INSTALL_PREFIX [ 51s] SYSCONF_INSTALL_DIR [ 51s] [ 51s] [ 51s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/data-router-0.2.18 [ 51s] + make -j4 [ 51s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/data-router-0.2.18 -B/home/abuild/rpmbuild/BUILD/data-router-0.2.18 --check-build-system CMakeFiles/Makefile.cmake 0 [ 51s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/data-router-0.2.18/CMakeFiles /home/abuild/rpmbuild/BUILD/data-router-0.2.18/CMakeFiles/progress.marks [ 51s] make -f CMakeFiles/Makefile2 all [ 51s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/data-router-0.2.18' [ 51s] make -f CMakeFiles/data-router.dir/build.make CMakeFiles/data-router.dir/depend [ 51s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/data-router-0.2.18' [ 51s] cd /home/abuild/rpmbuild/BUILD/data-router-0.2.18 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/data-router-0.2.18 /home/abuild/rpmbuild/BUILD/data-router-0.2.18 /home/abuild/rpmbuild/BUILD/data-router-0.2.18 /home/abuild/rpmbuild/BUILD/data-router-0.2.18 /home/abuild/rpmbuild/BUILD/data-router-0.2.18/CMakeFiles/data-router.dir/DependInfo.cmake --color= [ 51s] Scanning dependencies of target data-router [ 51s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/data-router-0.2.18' [ 51s] make -f CMakeFiles/data-router.dir/build.make CMakeFiles/data-router.dir/build [ 51s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/data-router-0.2.18' [ 51s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/data-router-0.2.18/CMakeFiles 1 [ 51s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/data-router-0.2.18/CMakeFiles 2 [ 51s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/data-router-0.2.18/CMakeFiles 3 [ 51s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/data-router-0.2.18/CMakeFiles 4 [ 51s] [ 12%] [ 25%] [ 37%] [ 50%] Building C object CMakeFiles/data-router.dir/src/dr-usb.c.o [ 51s] Building C object CMakeFiles/data-router.dir/src/dr-modem.c.o [ 51s] Building C object CMakeFiles/data-router.dir/src/dr-main.c.o [ 51s] /usr/bin/cc -DFACTORYFS=\"\" -DPREFIX=\"/usr\" -DTARGET -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/dlog -I/usr/include/vconf -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -pthread -I/home/abuild/rpmbuild/BUILD/data-router-0.2.18 -I/home/abuild/rpmbuild/BUILD/data-router-0.2.18/include -o CMakeFiles/data-router.dir/src/dr-modem.c.o -c /home/abuild/rpmbuild/BUILD/data-router-0.2.18/src/dr-modem.c [ 51s] /usr/bin/cc -DFACTORYFS=\"\" -DPREFIX=\"/usr\" -DTARGET -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/dlog -I/usr/include/vconf -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -pthread -I/home/abuild/rpmbuild/BUILD/data-router-0.2.18 -I/home/abuild/rpmbuild/BUILD/data-router-0.2.18/include -o CMakeFiles/data-router.dir/src/dr-main.c.o -c /home/abuild/rpmbuild/BUILD/data-router-0.2.18/src/dr-main.c [ 51s] Building C object CMakeFiles/data-router.dir/src/dr-noti-handler.c.o [ 51s] /usr/bin/cc -DFACTORYFS=\"\" -DPREFIX=\"/usr\" -DTARGET -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/dlog -I/usr/include/vconf -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -pthread -I/home/abuild/rpmbuild/BUILD/data-router-0.2.18 -I/home/abuild/rpmbuild/BUILD/data-router-0.2.18/include -o CMakeFiles/data-router.dir/src/dr-usb.c.o -c /home/abuild/rpmbuild/BUILD/data-router-0.2.18/src/dr-usb.c [ 51s] /usr/bin/cc -DFACTORYFS=\"\" -DPREFIX=\"/usr\" -DTARGET -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/dlog -I/usr/include/vconf -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -pthread -I/home/abuild/rpmbuild/BUILD/data-router-0.2.18 -I/home/abuild/rpmbuild/BUILD/data-router-0.2.18/include -o CMakeFiles/data-router.dir/src/dr-noti-handler.c.o -c /home/abuild/rpmbuild/BUILD/data-router-0.2.18/src/dr-noti-handler.c [ 51s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/data-router-0.2.18/CMakeFiles 5 [ 51s] [ 62%] Building C object CMakeFiles/data-router.dir/src/dr-util.c.o [ 51s] /usr/bin/cc -DFACTORYFS=\"\" -DPREFIX=\"/usr\" -DTARGET -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/dlog -I/usr/include/vconf -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -pthread -I/home/abuild/rpmbuild/BUILD/data-router-0.2.18 -I/home/abuild/rpmbuild/BUILD/data-router-0.2.18/include -o CMakeFiles/data-router.dir/src/dr-util.c.o -c /home/abuild/rpmbuild/BUILD/data-router-0.2.18/src/dr-util.c [ 51s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/data-router-0.2.18/CMakeFiles 6 [ 51s] [ 75%] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/data-router-0.2.18/CMakeFiles 7 [ 51s] Building C object CMakeFiles/data-router.dir/src/dr-common.c.o [ 51s] /usr/bin/cc -DFACTORYFS=\"\" -DPREFIX=\"/usr\" -DTARGET -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/dlog -I/usr/include/vconf -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -pthread -I/home/abuild/rpmbuild/BUILD/data-router-0.2.18 -I/home/abuild/rpmbuild/BUILD/data-router-0.2.18/include -o CMakeFiles/data-router.dir/src/dr-common.c.o -c /home/abuild/rpmbuild/BUILD/data-router-0.2.18/src/dr-common.c [ 51s] [ 87%] Building C object CMakeFiles/data-router.dir/src/dr-parser.c.o [ 51s] /usr/bin/cc -DFACTORYFS=\"\" -DPREFIX=\"/usr\" -DTARGET -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/dlog -I/usr/include/vconf -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -pthread -I/home/abuild/rpmbuild/BUILD/data-router-0.2.18 -I/home/abuild/rpmbuild/BUILD/data-router-0.2.18/include -o CMakeFiles/data-router.dir/src/dr-parser.c.o -c /home/abuild/rpmbuild/BUILD/data-router-0.2.18/src/dr-parser.c [ 51s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/data-router-0.2.18/CMakeFiles 8 [ 51s] [100%] Building C object CMakeFiles/data-router.dir/src/dr-ipc.c.o [ 51s] /usr/bin/cc -DFACTORYFS=\"\" -DPREFIX=\"/usr\" -DTARGET -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/dlog -I/usr/include/vconf -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -pthread -I/home/abuild/rpmbuild/BUILD/data-router-0.2.18 -I/home/abuild/rpmbuild/BUILD/data-router-0.2.18/include -o CMakeFiles/data-router.dir/src/dr-ipc.c.o -c /home/abuild/rpmbuild/BUILD/data-router-0.2.18/src/dr-ipc.c [ 51s] Linking C executable data-router [ 51s] /usr/bin/cmake -E cmake_link_script CMakeFiles/data-router.dir/link.txt --verbose=1 [ 51s] /usr/bin/cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/dlog -I/usr/include/vconf -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -pthread CMakeFiles/data-router.dir/src/dr-main.c.o CMakeFiles/data-router.dir/src/dr-modem.c.o CMakeFiles/data-router.dir/src/dr-usb.c.o CMakeFiles/data-router.dir/src/dr-noti-handler.c.o CMakeFiles/data-router.dir/src/dr-util.c.o CMakeFiles/data-router.dir/src/dr-common.c.o CMakeFiles/data-router.dir/src/dr-parser.c.o CMakeFiles/data-router.dir/src/dr-ipc.c.o -o data-router -rdynamic -ldbus-glib-1 -ldbus-1 -lgobject-2.0 -lglib-2.0 -ldlog -lvconf [ 51s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/data-router-0.2.18' [ 51s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/data-router-0.2.18/CMakeFiles 1 2 3 4 5 6 7 8 [ 51s] [100%] Built target data-router [ 51s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/data-router-0.2.18' [ 51s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/data-router-0.2.18/CMakeFiles 0 [ 51s] + exit 0 [ 51s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.MsVIlb [ 51s] + umask 022 [ 51s] + cd /home/abuild/rpmbuild/BUILD [ 51s] + cd data-router-0.2.18 [ 51s] + LANG=C [ 51s] + export LANG [ 51s] + unset DISPLAY [ 51s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/data-router-0.2.18-1.1.arm [ 51s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/data-router-0.2.18-1.1.arm [ 51s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/data-router-0.2.18-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/data-router-0.2.18-1.1.arm install [ 51s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/data-router-0.2.18 -B/home/abuild/rpmbuild/BUILD/data-router-0.2.18 --check-build-system CMakeFiles/Makefile.cmake 0 [ 51s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/data-router-0.2.18/CMakeFiles /home/abuild/rpmbuild/BUILD/data-router-0.2.18/CMakeFiles/progress.marks [ 51s] /bin/make -f CMakeFiles/Makefile2 all [ 51s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/data-router-0.2.18' [ 51s] /bin/make -f CMakeFiles/data-router.dir/build.make CMakeFiles/data-router.dir/depend [ 51s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/data-router-0.2.18' [ 51s] cd /home/abuild/rpmbuild/BUILD/data-router-0.2.18 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/data-router-0.2.18 /home/abuild/rpmbuild/BUILD/data-router-0.2.18 /home/abuild/rpmbuild/BUILD/data-router-0.2.18 /home/abuild/rpmbuild/BUILD/data-router-0.2.18 /home/abuild/rpmbuild/BUILD/data-router-0.2.18/CMakeFiles/data-router.dir/DependInfo.cmake --color= [ 51s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/data-router-0.2.18' [ 51s] /bin/make -f CMakeFiles/data-router.dir/build.make CMakeFiles/data-router.dir/build [ 51s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/data-router-0.2.18' [ 51s] make[2]: Nothing to be done for 'CMakeFiles/data-router.dir/build'. [ 51s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/data-router-0.2.18' [ 51s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/data-router-0.2.18/CMakeFiles 1 2 3 4 5 6 7 8 [ 51s] [100%] Built target data-router [ 51s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/data-router-0.2.18' [ 51s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/data-router-0.2.18/CMakeFiles 0 [ 51s] /bin/make -f CMakeFiles/Makefile2 preinstall [ 51s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/data-router-0.2.18' [ 51s] make[1]: Nothing to be done for 'preinstall'. [ 51s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/data-router-0.2.18' [ 51s] Install the project... [ 51s] /usr/bin/cmake -P cmake_install.cmake [ 51s] -- Install configuration: "" [ 51s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/data-router-0.2.18-1.1.arm/usr/bin/data-router [ 51s] + rm -f /home/abuild/rpmbuild/BUILDROOT/data-router-0.2.18-1.1.arm/usr/share/info/dir [ 51s] + find /home/abuild/rpmbuild/BUILDROOT/data-router-0.2.18-1.1.arm -regex '.*\.la$' [ 51s] + xargs rm -f -- [ 51s] + find /home/abuild/rpmbuild/BUILDROOT/data-router-0.2.18-1.1.arm -regex '.*\.a$' [ 51s] + xargs rm -f -- [ 51s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/data-router-0.2.18 [ 52s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/data-router-0.2.18-1.1.arm/usr/bin/data-router [ 52s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 52s] cpio: glibc-2.20/csu/init.c: Cannot stat: No such file or directory [ 52s] cpio: glibc-2.20/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 52s] cpio: glibc-2.20/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 52s] cpio: glibc-2.20/sysdeps/arm/start.S: Cannot stat: No such file or directory [ 52s] 74 blocks [ 52s] + /usr/lib/rpm/check-buildroot [ 52s] + /usr/lib/rpm//brp-compress [ 52s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 52s] + /usr/lib/rpm/brp-python-hardlink [ 52s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/data-router-0.2.18-1.1.arm [ 52s] Processing files: data-router-0.2.18-1.1.armv7l [ 52s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 52s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 52s] [ 52s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.6CyFAX [ 52s] + umask 022 [ 52s] + cd /home/abuild/rpmbuild/BUILD [ 52s] + cd data-router-0.2.18 [ 52s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/data-router-0.2.18-1.1.arm/usr/share/licenses/data-router [ 52s] + export LICENSEDIR [ 52s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/data-router-0.2.18-1.1.arm/usr/share/licenses/data-router [ 52s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/data-router-0.2.18-1.1.arm/usr/share/licenses/data-router [ 52s] + exit 0 [ 52s] Provides: data-router = 0.2.18-1.1 data-router(armv7l-32) = 0.2.18-1.1 [ 52s] Requires(interp): /bin/sh [ 52s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 52s] Requires(post): /bin/sh /usr/bin/vconftool [ 52s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libdbus-1.so.3 libdbus-1.so.3(LIBDBUS_1_3) libdbus-glib-1.so.2 libdlog.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libglib-2.0.so.0 libpthread.so.0 libpthread.so.0(GLIBC_2.4) libvconf.so.0 libvconf.so.0(VCONF_BUXTON_1.0) rtld(GNU_HASH) [ 52s] Processing files: data-router-debugsource-0.2.18-1.1.armv7l [ 52s] Provides: data-router-debugsource = 0.2.18-1.1 data-router-debugsource(armv7l-32) = 0.2.18-1.1 [ 52s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 52s] Processing files: data-router-debuginfo-0.2.18-1.1.armv7l [ 52s] Provides: data-router-debuginfo = 0.2.18-1.1 data-router-debuginfo(armv7l-32) = 0.2.18-1.1 [ 52s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 52s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/data-router-0.2.18-1.1.arm [ 52s] warning: Could not canonicalize hostname: w33 [ 52s] Wrote: /home/abuild/rpmbuild/SRPMS/data-router-0.2.18-1.1.src.rpm [ 52s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/data-router-0.2.18-1.1.armv7l.rpm [ 52s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/data-router-debugsource-0.2.18-1.1.armv7l.rpm [ 52s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/data-router-debuginfo-0.2.18-1.1.armv7l.rpm [ 52s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.c5B9yU [ 52s] + umask 022 [ 52s] + cd /home/abuild/rpmbuild/BUILD [ 52s] + cd data-router-0.2.18 [ 52s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/data-router-0.2.18-1.1.arm [ 52s] + exit 0 [ 52s] ... checking for files with abuild user/group [ 52s] ... creating baselibs [ 53s] ... saving built statistics [ 53s] ... saving built packages [ 53s] /home/abuild/rpmbuild/RPMS/armv7l/data-router-0.2.18-1.1.armv7l.rpm [ 53s] /home/abuild/rpmbuild/RPMS/armv7l/data-router-debuginfo-0.2.18-1.1.armv7l.rpm [ 53s] /home/abuild/rpmbuild/RPMS/armv7l/data-router-debugsource-0.2.18-1.1.armv7l.rpm [ 53s] /home/abuild/rpmbuild/SRPMS/data-router-0.2.18-1.1.src.rpm [ 53s] /home/abuild/rpmbuild/OTHER/_statistics [ 53s] [ 53s] w33 finished "build data-router.spec" at Thu Jan 5 03:29:10 UTC 2017. [ 53s] [ 55s] /.build/build: line 368: 227 Killed background_monitor_process [ 57s] [ 47.577723] SysRq : Power Off [ 57s] [ 47.584364] Power down. [ 57s] build: extracting built packages... [ 57s] data-router-0.2.18-1.1.armv7l.rpm [ 57s] data-router-debuginfo-0.2.18-1.1.armv7l.rpm [ 57s] data-router-debugsource-0.2.18-1.1.armv7l.rpm [ 57s] data-router-0.2.18-1.1.src.rpm [ 57s] _statistics