[ 0s] Using BUILD_ROOT=/srv/build/root_5/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_5/root [ 0s] [ 0s] [ 0s] w28 started "build _service:gbs:motion.spec" at Thu Jan 5 03:28:35 UTC 2017. [ 0s] [ 0s] Building motion for project 'Tizen:3.0.M2:Mobile' repository 'target-TM1' arch 'armv7l' srcmd5 'e2d216618a0ebb7bfe76b2a63fa98e51' [ 0s] [ 0s] processing specfile /srv/build/root_5/.build-srcdir/_service:gbs:motion.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_5/.build-srcdir/_service:gbs:motion.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/5/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_5/.build.rpmlist /srv/build/root_5/.build-srcdir/_service:gbs:motion.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 0s] [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] Copying qemu-fix-build-hang.sh [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/40] preinstalling libmagic-data... [ 0s] [2/40] preinstalling setup... [ 0s] [3/40] preinstalling filesystem... [ 0s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling libgcc... [ 1s] [6/40] preinstalling bash... [ 1s] [7/40] preinstalling diffutils... [ 1s] [8/40] preinstalling grep... [ 1s] [9/40] preinstalling libattr... [ 1s] [10/40] preinstalling libbz2... [ 1s] [11/40] preinstalling libcap... [ 1s] [12/40] preinstalling libelf... [ 1s] [13/40] preinstalling libfreebl3... [ 1s] [14/40] preinstalling liblua... [ 1s] [15/40] preinstalling liblzma... [ 1s] [16/40] preinstalling libncurses... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libsmack... [ 1s] [19/40] preinstalling libsqlite... [ 1s] [20/40] preinstalling libuuid... [ 1s] [21/40] preinstalling nspr... [ 1s] [22/40] preinstalling sed... [ 1s] [23/40] preinstalling zlib... [ 1s] [24/40] preinstalling qemu-accel-x86_64-armv7l... [ 3s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 4s] [26/40] preinstalling coreutils... [ 4s] [27/40] preinstalling libacl... [ 4s] [28/40] preinstalling libblkid... [ 4s] [29/40] preinstalling libreadline... [ 4s] [30/40] preinstalling smack... [ 4s] [31/40] preinstalling bzip2... [ 4s] [32/40] preinstalling libmagic... [ 4s] [33/40] preinstalling libxml2... [ 4s] [34/40] preinstalling libmount... [ 4s] [35/40] preinstalling tar... [ 4s] [36/40] preinstalling util-linux... [ 5s] [37/40] preinstalling util-linux-su... [ 5s] [38/40] preinstalling nss... [ 5s] [39/40] preinstalling libsoftokn3... [ 5s] [40/40] preinstalling rpm... [ 5s] [ 5s] [1/9] preinstalling libext2fs... [ 5s] [2/9] preinstalling libpcre... [ 5s] [3/9] preinstalling libsmartcols... [ 5s] [4/9] preinstalling libuuid... [ 5s] [5/9] preinstalling perl... [ 6s] [6/9] preinstalling grep... [ 6s] [7/9] preinstalling libblkid... [ 6s] [8/9] preinstalling libmount... [ 6s] [9/9] preinstalling util-linux... [ 6s] copying packages... [ 6s] reordering...cycle: gio-branding-upstream -> libgio [ 6s] breaking dependency libgio -> gio-branding-upstream [ 6s] cycle: vconf-compat -> buxton2 [ 6s] breaking dependency buxton2 -> vconf-compat [ 6s] cycle: libsensord -> sensord [ 6s] breaking dependency libsensord -> sensord [ 6s] cycle: libsoftokn3 -> nss [ 6s] breaking dependency nss -> libsoftokn3 [ 6s] done [ 14s] booting kvm ... [ 14s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 6000 -drive file=/srv/build/root_5/root,if=virtio,cache=none -drive file=/srv/build/root_5/root,if=ide,index=0,cache=none -drive file=/srv/build/root_5/swap,if=virtio,cache=none -smp 4 [ 18s] [ 0.000000] tsc: Fast TSC calibration failed [ 18s] doing fast boot [ 18s] Creating device nodes with udev [ 24s] Waiting for device /dev/vda to appear: ok [ 24s] fsck from util-linux 2.21.2 [ 24s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 24s] /dev/vda: clean, 5085/2392064 files, 264560/9568256 blocks [ 24s] fsck succeeded. Mounting root device read-write. [ 24s] Mounting root /dev/vda [ 24s] mount -o rw -t ext4 /dev/vda /root [ 25s] replacing /etc/mtab with symlink to /proc/self/mounts [ 26s] 2nd stage started in virtual machine [ 26s] machine type: armv7l [ 26s] swapon: /dev/vdb: found signature [pagesize=4096, signature=swap] [ 26s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 26s] swapon /dev/vdb [ 26s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 26s] mount: none is already mounted or /proc busy [ 26s] mount: none is already mounted or /dev/pts busy [ 26s] logging output to //.build.log... [ 26s] processing specfile /.build-srcdir/_service:gbs:motion.spec ... [ 26s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:motion.spec build rpmlint-Factory ... [ 43s] running qemu-linux-user-x86_64-cross postinstall script [ 45s] running qemu-accel-x86_64-armv7l postinstall script [ 46s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/liblto_plugin.so': No such file or directory [ 46s] running setup postinstall script [ 46s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 46s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 46s] initializing rpm db... [ 49s] [1/136] installing default-ac-domains-0.1-1.1 [ 49s] [2/136] installing libmagic-data-5.28-1.1 [ 50s] [3/136] installing setup-0.9-1.1 [ 50s] [4/136] installing terminfo-base-5.9-1.1 [ 50s] [5/136] installing filesystem-3.1-1.1 [ 50s] [6/136] installing glibc-2.20-1.1 [ 50s] [7/136] installing libatomic-4.9.2-1.2 [ 50s] [8/136] installing libgcc-4.9.2-1.2 [ 50s] [9/136] installing libgomp-4.9.2-1.2 [ 51s] [10/136] installing bash-3.2.57-1.1 [ 51s] [11/136] installing capi-base-common-0.4.12-1.1 [ 51s] [12/136] installing cpio-2.11-1.1 [ 51s] [13/136] installing diffutils-3.3-1.1 [ 51s] [14/136] installing findutils-4.3.8-1.1 [ 51s] [15/136] installing gdbm-1.8.3-1.1 [ 52s] [16/136] installing hostname-3.12-1.1 [ 52s] [17/136] installing iniparser-3.2-1.1 [ 52s] [18/136] installing libattr-2.4.47-1.1 [ 52s] [19/136] installing libbz2-1.0.6-1.5 [ 52s] [20/136] installing libcap-2.24-1.1 [ 52s] [21/136] installing libelf-0.153-1.5 [ 53s] [22/136] installing libelf0-0.8.13-1.1 [ 53s] [23/136] installing libexpat-2.2.0-1.1 [ 53s] [24/136] installing libext2fs-1.42.13-1.1 [ 53s] [25/136] installing libffi-3.1-1.1 [ 54s] [26/136] installing libfreebl3-3.23-1.5 [ 54s] [27/136] installing libitm-4.9.2-1.2 [ 55s] [28/136] installing libltdl-2.4.2-1.1 [ 55s] [29/136] installing liblua-5.1.4-1.1 [ 55s] [30/136] installing liblzma-5.1.3-1.1 [ 55s] [31/136] installing libpcre-8.39-1.1 [ 56s] [32/136] installing libpopt-1.16-1.1 [ 57s] [33/136] installing libpython-2.7.8-1.2 [ 59s] [34/136] installing libsmack-1.3.0-1.1 [ 59s] [35/136] installing libsmartcols-2.28-1.1 [ 60s] [36/136] installing libsqlite-3.8.10.2-1.1 [ 60s] [37/136] installing libstdc++-4.9.2-1.2 [ 61s] [38/136] installing libuuid-2.28-1.1 [ 61s] [39/136] installing m4-1.4.17-1.1 [ 61s] [40/136] installing net-tools-2.0_20121208git-1.1 [ 62s] [41/136] installing nspr-4.12-1.1 [ 63s] [42/136] installing patch-2.7-1.1 [ 63s] [43/136] installing pkg-config-0.28-1.1 [ 63s] [44/136] installing sed-4.1c-1.1 [ 63s] [45/136] installing update-alternatives-1.16.3-1.1 [ 64s] [46/136] installing which-2.20-1.1 [ 64s] [47/136] installing zlib-1.2.8-1.1 [ 64s] [48/136] installing libncurses-5.9-1.1 [ 64s] [49/136] installing shadow-utils-4.1.4.2-1.1 [ 65s] [50/136] installing build-compare-2015.04.28-1.4 [ 65s] [51/136] installing libstdc++-devel-4.9.2-1.2 [ 66s] [52/136] installing qemu-linux-user-x86_64-cross-2.7.0-1.2.1 [ 69s] [53/136] installing capi-base-common-devel-0.4.12-1.1 [ 70s] [54/136] installing cpp-4.9.2-1.2 [ 71s] [55/136] installing gcc-c++-4.9.2-1.2 [ 73s] [56/136] installing binutils-2.25-1.2 [ 73s] [57/136] installing coreutils-6.9-1.1 [ 73s] [58/136] installing db4-4.8.30.NC-1.1 [ 73s] [59/136] installing gawk-3.1.5-1.1 [ 74s] [60/136] installing grep-2.5.2-1.1 [ 74s] [61/136] installing less-466-1.1 [ 74s] [62/136] installing libacl-2.2.52-1.1 [ 74s] [63/136] installing libasm-0.153-1.5 [ 74s] [64/136] installing libblkid-2.28-1.1 [ 74s] [65/136] installing libcap-tools-2.24-1.1 [ 74s] [66/136] installing libglib-2.44.1-1.1 [ 74s] [67/136] installing libopenssl-1.0.2j-1.1 [ 75s] [68/136] installing libpcreposix-8.39-1.1 [ 75s] [69/136] installing libreadline-5.2-1.1 [ 75s] [70/136] installing libubsan-4.9.2-1.2 [ 75s] [71/136] installing make-4.0-1.1 [ 75s] [72/136] installing nss-certs-3.23-1.5 [ 75s] [73/136] installing smack-1.3.0-1.1 [ 75s] [74/136] installing bzip2-1.0.6-1.5 [ 75s] [75/136] installing libmagic-5.28-1.1 [ 75s] [76/136] installing libpcrecpp-8.39-1.1 [ 75s] [77/136] installing libxml2-2.9.4-1.1 [ 75s] [78/136] installing xz-5.1.3-1.1 [ 75s] [79/136] installing cynara-db-migration-0.14.6-1.1 [ 75s] [80/136] installing libdw-0.153-1.5 [ 75s] [81/136] installing linux-glibc-devel-3.10-1.1 [ 76s] [82/136] installing vconf-internal-keys-devel-0.0.159-1.1 [ 76s] [83/136] installing file-5.28-1.1 [ 76s] [84/136] installing glibc-locale-2.20-1.1 [ 76s] [85/136] installing libgmodule-2.44.1-1.1 [ 76s] [86/136] installing libgthread-2.44.1-1.1 [ 76s] [87/136] installing libmount-2.28-1.1 [ 76s] [88/136] installing security-config-1.0-1.1 [ 83s] usermod: user 'buxton' does not exist [ 83s] usermod: user 'dbus' does not exist [ 83s] [89/136] installing tar-1.17-1.1 [ 83s] [90/136] installing gzip-1.3.12-1.1 [ 83s] [91/136] installing libfdisk1-2.28-1.1 [ 84s] [92/136] installing libgobject-2.44.1-1.1 [ 84s] [93/136] installing pam-1.1.6-1.1 [ 84s] [94/136] installing perl-5.20.0-1.5 [ 100s] [95/136] installing tzdata-2016i-1.1 [ 101s] [96/136] installing pcre-devel-8.39-1.1 [ 101s] [97/136] installing elfutils-0.153-1.5 [ 102s] [98/136] installing gcc-4.9.2-1.2 [ 103s] [99/136] installing libcynara-commons-0.14.6-1.1 [ 104s] [100/136] installing shared-mime-info-1.3-1.1 [ 110s] [101/136] installing libarchive-3.1.2-1.1 [ 110s] [102/136] installing python-2.7.8-1.2 [ 111s] [103/136] installing build-mkbaselibs-20120927-1.1 [ 112s] [104/136] installing glibc-devel-2.20-1.1 [ 112s] [105/136] installing qemu-accel-x86_64-armv7l-0.4-1.2 [ 119s] [106/136] installing autoconf-2.69-1.1 [ 120s] [107/136] installing libcynara-client-0.14.6-1.1 [ 120s] [108/136] installing libcynara-creds-commons-0.14.6-1.1 [ 120s] [109/136] installing libcynara-session-0.14.6-1.1 [ 120s] [110/136] installing python-xml-2.7.8-1.2 [ 121s] [111/136] installing libsystemd-219-1.1 [ 121s] [112/136] installing cmake-2.8.12.2-1.1 [ 122s] [113/136] installing util-linux-2.28-1.1 [ 122s] [114/136] installing automake-1.14.1-1.1 [ 123s] [115/136] installing util-linux-su-2.28-1.1 [ 123s] [116/136] installing build-20120927-1.1 [ 123s] [117/136] installing libcynara-creds-socket-0.14.6-1.1 [ 123s] [118/136] installing libdlog-0.5.1-1.1 [ 123s] [119/136] installing libdlog-devel-0.5.1-1.1 [ 123s] [120/136] installing libtool-2.4.2-1.1 [ 124s] [121/136] installing capi-system-info-0.2.0-1.1 [ 124s] [122/136] installing capi-system-info-devel-0.2.0-1.1 [ 124s] [123/136] installing nss-3.23-1.5 [ 124s] [124/136] installing libgio-2.44.1-1.1 [ 124s] [125/136] installing gio-branding-upstream-2.44.1-1.1 [ 124s] [126/136] installing libsoftokn3-3.23-1.5 [ 125s] [127/136] installing glib2-tools-2.44.1-1.1 [ 125s] [128/136] installing rpm-4.11.0.1-1.1 [ 125s] [129/136] installing buxton2-1.1-1.1 [ 126s] warning: user buxton does not exist - using root [ 126s] warning: group buxton does not exist - using root [ 126s] warning: user buxton does not exist - using root [ 126s] warning: group buxton does not exist - using root [ 126s] chmod: cannot access `/etc/buxton2/*': No such file or directory [ 126s] /etc/buxton2/*: No such file or directory [ 126s] [130/136] installing vconf-compat-1.1-1.1 [ 126s] [131/136] installing glib2-devel-2.44.1-1.1 [ 126s] [132/136] installing rpm-build-4.11.0.1-1.1 [ 126s] [133/136] installing vconf-compat-devel-1.1-1.1 [ 126s] [134/136] installing libsensord-2.0.9-1.1 [ 126s] [135/136] installing libsensord-devel-2.0.9-1.1 [ 126s] [136/136] installing sensord-2.0.9-1.1 [ 127s] /var/tmp/rpm-tmp.SCqGUC: line 1: systemctl: command not found [ 127s] warning: %post(sensord-2.0.9-1.1.armv7l) scriptlet failed, exit status 127 [ 127s] removing nis flags from //etc/nsswitch.conf... [ 127s] now finalizing build dir... [ 133s] build target is armv7l-tizen-linux [ 133s] ----------------------------------------------------------------- [ 133s] I have the following modifications for motion.spec: [ 133s] 5c5 [ 133s] < Release: 1 [ 133s] --- [ 133s] > Release: 1.1 [ 133s] ----------------------------------------------------------------- [ 133s] ----- building motion.spec (user abuild) [ 133s] ----------------------------------------------------------------- [ 133s] ----------------------------------------------------------------- [ 133s] Running qemu build hang workaround... [ 133s] /bin/ps command not found [ 133s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0.M2:Mobile/target-TM1/e2d216618a0ebb7bfe76b2a63fa98e51-motion' /home/abuild/rpmbuild/SOURCES/motion.spec [ 133s] Building target platforms: armv7l-tizen-linux [ 133s] Building for target armv7l-tizen-linux [ 133s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.98M6ot [ 133s] + umask 022 [ 133s] + cd /home/abuild/rpmbuild/BUILD [ 133s] + cd /home/abuild/rpmbuild/BUILD [ 133s] + rm -rf motion-1.2.1 [ 133s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/motion-1.2.1.tar.gz [ 133s] + /bin/tar -xf - [ 133s] + STATUS=0 [ 133s] + '[' 0 -ne 0 ']' [ 133s] + cd motion-1.2.1 [ 133s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 133s] + exit 0 [ 133s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.AiCJoG [ 133s] + umask 022 [ 133s] + cd /home/abuild/rpmbuild/BUILD [ 133s] + cd motion-1.2.1 [ 133s] ++ uname -m [ 133s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 133s] + LANG=C [ 133s] + export LANG [ 133s] + unset DISPLAY [ 133s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 133s] + export CFLAGS [ 133s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 133s] + export CXXFLAGS [ 133s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 133s] + export FFLAGS [ 133s] + LDFLAGS= [ 133s] + export LDFLAGS [ 133s] + LD_AS_NEEDED=1 [ 133s] + export LD_AS_NEEDED [ 133s] ++ echo 1.2.1 [ 133s] ++ awk 'BEGIN {FS="."}{print $1}' [ 133s] + MAJORVER=1 [ 133s] + export 'CFLAGS+= -Wextra -Wcast-align -Wshadow -Wwrite-strings -Wswitch-default -Wno-unused-parameter' [ 133s] + CFLAGS+=' -Wextra -Wcast-align -Wshadow -Wwrite-strings -Wswitch-default -Wno-unused-parameter' [ 133s] + export 'CXXFLAGS+= -Wextra -Wcast-align -Wshadow -Wwrite-strings -Wswitch-default -Wno-unused-parameter' [ 133s] + CXXFLAGS+=' -Wextra -Wcast-align -Wshadow -Wwrite-strings -Wswitch-default -Wno-unused-parameter' [ 133s] + export 'CFLAGS+= -Wno-empty-body -fomit-frame-pointer -fno-optimize-sibling-calls' [ 133s] + CFLAGS+=' -Wno-empty-body -fomit-frame-pointer -fno-optimize-sibling-calls' [ 133s] + export 'CXXFLAGS+= -Wno-empty-body -fomit-frame-pointer -fno-optimize-sibling-calls' [ 133s] + CXXFLAGS+=' -Wno-empty-body -fomit-frame-pointer -fno-optimize-sibling-calls' [ 133s] + export 'CFLAGS+= -fno-strict-aliasing -fno-unroll-loops -fsigned-char -fstrict-overflow' [ 133s] + CFLAGS+=' -fno-strict-aliasing -fno-unroll-loops -fsigned-char -fstrict-overflow' [ 133s] + export 'CXXFLAGS+= -fno-strict-aliasing -fno-unroll-loops -fsigned-char -fstrict-overflow' [ 133s] + CXXFLAGS+=' -fno-strict-aliasing -fno-unroll-loops -fsigned-char -fstrict-overflow' [ 133s] + export 'CFLAGS+= -fno-common' [ 133s] + CFLAGS+=' -fno-common' [ 133s] + export 'CXXFLAGS+= -Wnon-virtual-dtor' [ 133s] + CXXFLAGS+=' -Wnon-virtual-dtor' [ 133s] + cmake . -DCMAKE_INSTALL_PREFIX=/usr -DMAJORVER=1 -DFULLVER=1.2.1 [ 134s] -- The C compiler identification is GNU 4.9.2 [ 134s] -- The CXX compiler identification is GNU 4.9.2 [ 134s] -- Check for working C compiler: /usr/bin/cc [ 134s] -- Check for working C compiler: /usr/bin/cc -- works [ 134s] -- Detecting C compiler ABI info [ 134s] -- Detecting C compiler ABI info - done [ 134s] -- Check for working CXX compiler: /usr/bin/c++ [ 134s] -- Check for working CXX compiler: /usr/bin/c++ -- works [ 134s] -- Detecting CXX compiler ABI info [ 134s] -- Detecting CXX compiler ABI info - done [ 134s] -- Found PkgConfig: /usr/bin/pkg-config (found version "0.28") [ 134s] -- checking for module 'glib-2.0 dlog capi-base-common capi-system-info sensor' [ 134s] -- found glib-2.0 dlog capi-base-common capi-system-info sensor, version 2.44.1;1.0;0.4.12;0.2.0;2.0.9 [ 135s] -- Configuring done [ 135s] -- Generating done [ 135s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/motion-1.2.1 [ 135s] + make -j4 [ 135s] Scanning dependencies of target core-context-manager [ 135s] [ 16%] [ 33%] [ 50%] [ 66%] Building CXX object CMakeFiles/core-context-manager.dir/src/ActivitySensor.cpp.o [ 135s] Building CXX object CMakeFiles/core-context-manager.dir/src/Activity.cpp.o [ 135s] Building CXX object CMakeFiles/core-context-manager.dir/src/GestureSensor.cpp.o [ 135s] Building CXX object CMakeFiles/core-context-manager.dir/src/Gesture.cpp.o [ 135s] [ 83%] Building CXX object CMakeFiles/core-context-manager.dir/src/SensorAdapter.cpp.o [ 135s] [100%] Building CXX object CMakeFiles/core-context-manager.dir/src/TypesInternal.cpp.o [ 135s] Linking CXX shared library libcore-context-manager.so [ 135s] [100%] Built target core-context-manager [ 135s] + exit 0 [ 135s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.RhsIL1 [ 135s] + umask 022 [ 135s] + cd /home/abuild/rpmbuild/BUILD [ 135s] + cd motion-1.2.1 [ 135s] + LANG=C [ 135s] + export LANG [ 135s] + unset DISPLAY [ 135s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/motion-1.2.1-1.1.arm [ 135s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/motion-1.2.1-1.1.arm [ 135s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/motion-1.2.1-1.1.arm [ 135s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/motion-1.2.1-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/motion-1.2.1-1.1.arm install [ 135s] [100%] Built target core-context-manager [ 135s] Install the project... [ 135s] -- Install configuration: "" [ 135s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/motion-1.2.1-1.1.arm/usr/lib/libcore-context-manager.so.1.2.1 [ 135s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/motion-1.2.1-1.1.arm/usr/lib/libcore-context-manager.so.1 [ 135s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/motion-1.2.1-1.1.arm/usr/lib/libcore-context-manager.so [ 135s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/motion-1.2.1-1.1.arm/usr/include/context-service [ 135s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/motion-1.2.1-1.1.arm/usr/include/context-service/activity_recognition.h [ 135s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/motion-1.2.1-1.1.arm/usr/include/context-service/gesture_recognition.h [ 135s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/motion-1.2.1-1.1.arm/usr/lib/pkgconfig/motion.pc [ 135s] + rm -f /home/abuild/rpmbuild/BUILDROOT/motion-1.2.1-1.1.arm/usr/share/info/dir [ 135s] + find /home/abuild/rpmbuild/BUILDROOT/motion-1.2.1-1.1.arm -regex '.*\.la$' [ 135s] + xargs rm -f -- [ 135s] + find /home/abuild/rpmbuild/BUILDROOT/motion-1.2.1-1.1.arm -regex '.*\.a$' [ 135s] + xargs rm -f -- [ 135s] + ln -s ./motion.pc /home/abuild/rpmbuild/BUILDROOT/motion-1.2.1-1.1.arm//usr/lib/pkgconfig/libcore-context-manager.pc [ 135s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/motion-1.2.1 [ 135s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/motion-1.2.1-1.1.arm/usr/lib/libcore-context-manager.so.1.2.1 [ 136s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 136s] cpio: glibc-2.20/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 136s] cpio: glibc-2.20/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 136s] 88 blocks [ 136s] + /usr/lib/rpm/check-buildroot [ 136s] + /usr/lib/rpm//brp-compress [ 136s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 136s] + /usr/lib/rpm/brp-python-hardlink [ 136s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/motion-1.2.1-1.1.arm [ 136s] Processing files: motion-1.2.1-1.1.armv7l [ 136s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl [ 136s] cXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 136s] [ 136s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.i7v41o [ 136s] + umask 022 [ 136s] + cd /home/abuild/rpmbuild/BUILD [ 136s] + cd motion-1.2.1 [ 136s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/motion-1.2.1-1.1.arm/usr/share/licenses/motion [ 136s] + export LICENSEDIR [ 136s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/motion-1.2.1-1.1.arm/usr/share/licenses/motion [ 136s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/motion-1.2.1-1.1.arm/usr/share/licenses/motion [ 136s] + exit 0 [ 136s] Provides: libcore-context-manager.so.1 motion = 1.2.1-1.1 motion(armv7l-32) = 1.2.1-1.1 [ 136s] Requires(interp): /bin/sh /bin/sh [ 136s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 136s] Requires(post): /bin/sh /sbin/ldconfig [ 136s] Requires(postun): /bin/sh /sbin/ldconfig [ 136s] Requires: libc.so.6 libc.so.6(GLIBC_2.17) libc.so.6(GLIBC_2.4) libcapi-system-info.so.0 libcore-context-manager.so.1 libdlog.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.0) libgcc_s.so.1(GCC_3.3.1) libgcc_s.so.1(GCC_3.5) libm.so.6 libm.so.6(GLIBC_2.4) libsensor.so.2 libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(CXXABI_ARM_1.3.3) libstdc++.so.6(GLIBCXX_3.4) rtld(GNU_HASH) [ 136s] Processing files: motion-debugsource-1.2.1-1.1.armv7l [ 136s] Provides: motion-debugsource = 1.2.1-1.1 motion-debugsource(armv7l-32) = 1.2.1-1.1 [ 136s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 136s] Processing files: motion-devel-1.2.1-1.1.armv7l [ 136s] Provides: motion-devel = 1.2.1-1.1 motion-devel(armv7l-32) = 1.2.1-1.1 pkgconfig(libcore-context-manager) = 1.2.1 pkgconfig(motion) = 1.2.1 [ 136s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 136s] Requires: /usr/bin/pkg-config pkgconfig(capi-base-common) pkgconfig(capi-system-info) pkgconfig(dlog) pkgconfig(glib-2.0) pkgconfig(sensor) [ 136s] Processing files: motion-debuginfo-1.2.1-1.1.armv7l [ 136s] Provides: motion-debuginfo = 1.2.1-1.1 motion-debuginfo(armv7l-32) = 1.2.1-1.1 [ 136s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 136s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/motion-1.2.1-1.1.arm [ 136s] warning: Could not canonicalize hostname: w28 [ 136s] Wrote: /home/abuild/rpmbuild/SRPMS/motion-1.2.1-1.1.src.rpm [ 136s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/motion-1.2.1-1.1.armv7l.rpm [ 136s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/motion-debugsource-1.2.1-1.1.armv7l.rpm [ 136s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/motion-devel-1.2.1-1.1.armv7l.rpm [ 136s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/motion-debuginfo-1.2.1-1.1.armv7l.rpm [ 136s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.UisIWQ [ 136s] + umask 022 [ 136s] + cd /home/abuild/rpmbuild/BUILD [ 136s] + cd motion-1.2.1 [ 136s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/motion-1.2.1-1.1.arm [ 136s] + exit 0 [ 136s] ... checking for files with abuild user/group [ 136s] ... creating baselibs [ 137s] ... saving built statistics [ 137s] ... saving built packages [ 137s] /home/abuild/rpmbuild/RPMS/armv7l/motion-1.2.1-1.1.armv7l.rpm [ 137s] /home/abuild/rpmbuild/RPMS/armv7l/motion-debuginfo-1.2.1-1.1.armv7l.rpm [ 137s] /home/abuild/rpmbuild/RPMS/armv7l/motion-debugsource-1.2.1-1.1.armv7l.rpm [ 137s] /home/abuild/rpmbuild/RPMS/armv7l/motion-devel-1.2.1-1.1.armv7l.rpm [ 137s] /home/abuild/rpmbuild/SRPMS/motion-1.2.1-1.1.src.rpm [ 137s] /home/abuild/rpmbuild/OTHER/_statistics [ 138s] [ 138s] w28 finished "build motion.spec" at Thu Jan 5 03:30:52 UTC 2017. [ 138s] [ 139s] /.build/build: line 368: 239 Killed background_monitor_process [ 141s] [ 122.857917] SysRq : Power Off [ 141s] [ 123.068416] Power down. [ 141s] build: extracting built packages... [ 141s] motion-1.2.1-1.1.armv7l.rpm [ 141s] motion-debuginfo-1.2.1-1.1.armv7l.rpm [ 141s] motion-debugsource-1.2.1-1.1.armv7l.rpm [ 141s] motion-devel-1.2.1-1.1.armv7l.rpm [ 141s] motion-1.2.1-1.1.src.rpm [ 141s] _statistics