[ 0s] Using BUILD_ROOT=/srv/build/root_4/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_4/root [ 0s] [ 0s] [ 0s] w01 started "build _service:gbs:cryptsetup.spec" at Thu Jan 5 03:10:52 UTC 2017. [ 0s] [ 0s] Building cryptsetup for project 'Tizen:3.0.M2:Wearable' repository 'target-circle' arch 'armv7l' srcmd5 '20cb0375ece2f6af5b611ef473b7dfc9' [ 0s] [ 0s] processing specfile /srv/build/root_4/.build-srcdir/_service:gbs:cryptsetup.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_4/.build-srcdir/_service:gbs:cryptsetup.spec [ 1s] init_buildsystem --configdir /var/run/obs/worker/4/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_4/.build.rpmlist /srv/build/root_4/.build-srcdir/_service:gbs:cryptsetup.spec build rpmlint-Factory ... [ 1s] registering binfmt handlers for VM [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 1s] [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] Copying qemu-fix-build-hang.sh [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling setup... [ 1s] [3/40] preinstalling filesystem... [ 1s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling libgcc... [ 1s] [6/40] preinstalling bash... [ 1s] [7/40] preinstalling diffutils... [ 1s] [8/40] preinstalling grep... [ 1s] [9/40] preinstalling libattr... [ 1s] [10/40] preinstalling libbz2... [ 1s] [11/40] preinstalling libcap... [ 1s] [12/40] preinstalling libelf... [ 1s] [13/40] preinstalling libfreebl3... [ 1s] [14/40] preinstalling liblua... [ 1s] [15/40] preinstalling liblzma... [ 1s] [16/40] preinstalling libncurses... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libsmack... [ 1s] [19/40] preinstalling libsqlite... [ 2s] [20/40] preinstalling libuuid... [ 2s] [21/40] preinstalling nspr... [ 2s] [22/40] preinstalling sed... [ 2s] [23/40] preinstalling zlib... [ 2s] [24/40] preinstalling qemu-accel-x86_64-armv7l... [ 4s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 5s] [26/40] preinstalling coreutils... [ 5s] [27/40] preinstalling libacl... [ 5s] [28/40] preinstalling libblkid... [ 5s] [29/40] preinstalling libreadline... [ 5s] [30/40] preinstalling smack... [ 5s] [31/40] preinstalling bzip2... [ 5s] [32/40] preinstalling libmagic... [ 5s] [33/40] preinstalling libxml2... [ 5s] [34/40] preinstalling libmount... [ 5s] [35/40] preinstalling tar... [ 5s] [36/40] preinstalling util-linux... [ 6s] [37/40] preinstalling util-linux-su... [ 6s] [38/40] preinstalling nss... [ 6s] [39/40] preinstalling libsoftokn3... [ 6s] [40/40] preinstalling rpm... [ 6s] [ 6s] [1/9] preinstalling libext2fs... [ 6s] [2/9] preinstalling libpcre... [ 6s] [3/9] preinstalling libsmartcols... [ 6s] [4/9] preinstalling libuuid... [ 6s] [5/9] preinstalling perl... [ 7s] [6/9] preinstalling grep... [ 7s] [7/9] preinstalling libblkid... [ 7s] [8/9] preinstalling libmount... [ 7s] [9/9] preinstalling util-linux... [ 7s] copying packages... [ 7s] reordering...cycle: libsoftokn3 -> nss [ 7s] breaking dependency nss -> libsoftokn3 [ 7s] done [ 7s] booting kvm ... [ 7s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 16000 -drive file=/srv/build/root_4/root,if=virtio,cache=none -drive file=/srv/build/root_4/root,if=ide,index=0,cache=none -drive file=/srv/build/root_4/swap,if=virtio,cache=none -smp 8 [ 12s] doing fast boot [ 12s] Creating device nodes with udev [ 13s] Waiting for device /dev/vda to appear: ok [ 13s] fsck from util-linux 2.21.2 [ 13s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 13s] /dev/vda: clean, 5014/4194304 files, 375506/16777216 blocks [ 13s] fsck succeeded. Mounting root device read-write. [ 13s] Mounting root /dev/vda [ 13s] mount -o rw -t ext4 /dev/vda /root [ 13s] replacing /etc/mtab with symlink to /proc/self/mounts [ 13s] 2nd stage started in virtual machine [ 13s] machine type: armv7l [ 13s] swapon: /dev/vdb: found signature [pagesize=4096, signature=swap] [ 13s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 13s] swapon /dev/vdb [ 13s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 13s] mount: none is already mounted or /proc busy [ 13s] mount: none is already mounted or /dev/pts busy [ 13s] logging output to //.build.log... [ 13s] processing specfile /.build-srcdir/_service:gbs:cryptsetup.spec ... [ 13s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:cryptsetup.spec build rpmlint-Factory ... [ 14s] running qemu-linux-user-x86_64-cross postinstall script [ 14s] running qemu-accel-x86_64-armv7l postinstall script [ 14s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/liblto_plugin.so': No such file or directory [ 14s] running setup postinstall script [ 14s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 14s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 14s] initializing rpm db... [ 15s] [1/100] installing libmagic-data-5.28-1.1 [ 15s] [2/100] installing setup-0.9-1.1 [ 15s] [3/100] installing terminfo-base-5.9-1.1 [ 15s] [4/100] installing filesystem-3.1-1.1 [ 15s] [5/100] installing glibc-2.20-1.1 [ 15s] [6/100] installing libatomic-4.9.2-1.2 [ 15s] [7/100] installing libgcc-4.9.2-1.2 [ 15s] [8/100] installing libgomp-4.9.2-1.2 [ 15s] [9/100] installing bash-3.2.57-1.1 [ 15s] [10/100] installing cpio-2.11-1.1 [ 15s] [11/100] installing diffutils-3.3-1.1 [ 15s] [12/100] installing findutils-4.3.8-1.1 [ 15s] [13/100] installing hostname-3.12-1.1 [ 15s] [14/100] installing libattr-2.4.47-1.1 [ 16s] [15/100] installing libbz2-1.0.6-1.5 [ 16s] [16/100] installing libcap-2.24-1.1 [ 16s] [17/100] installing libdevmapper-1.02.77-1.1 [ 16s] [18/100] installing libelf-0.153-1.5 [ 16s] [19/100] installing libext2fs-1.42.13-1.1 [ 16s] [20/100] installing libfreebl3-3.23-1.5 [ 16s] [21/100] installing libgpg-error-1.13-1.4 [ 16s] [22/100] installing libitm-4.9.2-1.2 [ 16s] [23/100] installing libltdl-2.4.2-1.1 [ 16s] [24/100] installing liblua-5.1.4-1.1 [ 16s] [25/100] installing liblzma-5.1.3-1.1 [ 16s] [26/100] installing libpcre-8.39-1.1 [ 16s] [27/100] installing libpopt-1.16-1.1 [ 16s] [28/100] installing libsmack-1.3.0-1.1 [ 16s] [29/100] installing libsmartcols-2.28-1.1 [ 16s] [30/100] installing libsqlite-3.8.10.2-1.1 [ 17s] [31/100] installing libstdc++-4.9.2-1.2 [ 17s] [32/100] installing libuuid-2.28-1.1 [ 17s] [33/100] installing m4-1.4.17-1.1 [ 17s] [34/100] installing net-tools-2.0_20121208git-1.1 [ 17s] [35/100] installing nspr-4.12-1.1 [ 17s] [36/100] installing patch-2.7-1.1 [ 17s] [37/100] installing pkg-config-0.28-1.1 [ 17s] [38/100] installing sed-4.1c-1.1 [ 17s] [39/100] installing update-alternatives-1.16.3-1.1 [ 17s] [40/100] installing which-2.20-1.1 [ 18s] [41/100] installing zlib-1.2.8-1.1 [ 18s] [42/100] installing libncurses-5.9-1.1 [ 19s] [43/100] installing build-compare-2015.04.28-1.4 [ 19s] [44/100] installing libstdc++-devel-4.9.2-1.2 [ 19s] [45/100] installing qemu-linux-user-x86_64-cross-2.7.0-1.2.1 [ 23s] [46/100] installing cpp-4.9.2-1.2 [ 24s] [47/100] installing gcc-c++-4.9.2-1.2 [ 25s] [48/100] installing libuuid-devel-2.28-1.1 [ 26s] [49/100] installing popt-devel-1.16-1.1 [ 26s] [50/100] installing binutils-2.25-1.2 [ 27s] [51/100] installing coreutils-6.9-1.1 [ 27s] [52/100] installing db4-4.8.30.NC-1.1 [ 28s] [53/100] installing device-mapper-1.02.77-1.1 [ 28s] [54/100] installing gawk-3.1.5-1.1 [ 28s] [55/100] installing grep-2.5.2-1.1 [ 29s] [56/100] installing less-466-1.1 [ 29s] [57/100] installing libacl-2.2.52-1.1 [ 29s] [58/100] installing libasm-0.153-1.5 [ 29s] [59/100] installing libblkid-2.28-1.1 [ 30s] [60/100] installing libgcrypt-1.7.1-1.1 [ 30s] [61/100] installing libreadline-5.2-1.1 [ 30s] [62/100] installing libubsan-4.9.2-1.2 [ 31s] [63/100] installing make-4.0-1.1 [ 31s] [64/100] installing nss-certs-3.23-1.5 [ 31s] [65/100] installing smack-1.3.0-1.1 [ 31s] [66/100] installing bzip2-1.0.6-1.5 [ 31s] [67/100] installing gettext-runtime-0.19.7-1.1 [ 31s] [68/100] installing libmagic-5.28-1.1 [ 32s] [69/100] installing libxml2-2.9.4-1.1 [ 32s] [70/100] installing xz-5.1.3-1.1 [ 33s] [71/100] installing libdw-0.153-1.5 [ 33s] [72/100] installing linux-glibc-devel-3.10-1.1 [ 33s] [73/100] installing device-mapper-devel-1.02.77-1.1 [ 34s] [74/100] installing file-5.28-1.1 [ 34s] [75/100] installing glibc-locale-2.20-1.1 [ 35s] [76/100] installing libmount-2.28-1.1 [ 35s] [77/100] installing tar-1.17-1.1 [ 35s] [78/100] installing gettext-tools-0.19.7-1.1 [ 36s] [79/100] installing gzip-1.3.12-1.1 [ 36s] [80/100] installing libfdisk1-2.28-1.1 [ 36s] [81/100] installing pam-1.1.6-1.1 [ 36s] [82/100] installing perl-5.20.0-1.5 [ 40s] [83/100] installing tzdata-2016i-1.1 [ 41s] [84/100] installing elfutils-0.153-1.5 [ 41s] [85/100] installing gcc-4.9.2-1.2 [ 41s] [86/100] installing build-mkbaselibs-20120927-1.1 [ 41s] [87/100] installing glibc-devel-2.20-1.1 [ 42s] [88/100] installing qemu-accel-x86_64-armv7l-0.4-1.2 [ 46s] [89/100] installing autoconf-2.69-1.1 [ 47s] [90/100] installing util-linux-2.28-1.1 [ 47s] [91/100] installing automake-1.14.1-1.1 [ 48s] [92/100] installing util-linux-su-2.28-1.1 [ 48s] [93/100] installing build-20120927-1.1 [ 48s] [94/100] installing libgpg-error-devel-1.13-1.4 [ 48s] [95/100] installing libtool-2.4.2-1.1 [ 49s] [96/100] installing libgcrypt-devel-1.7.1-1.1 [ 49s] [97/100] installing nss-3.23-1.5 [ 49s] [98/100] installing libsoftokn3-3.23-1.5 [ 49s] [99/100] installing rpm-4.11.0.1-1.1 [ 49s] [100/100] installing rpm-build-4.11.0.1-1.1 [ 50s] removing nis flags from //etc/nsswitch.conf... [ 50s] now finalizing build dir... [ 56s] build target is armv7l-tizen-linux [ 56s] ----------------------------------------------------------------- [ 56s] I have the following modifications for cryptsetup.spec: [ 56s] 5c5 [ 56s] < Release: 1 [ 56s] --- [ 56s] > Release: 1.1 [ 56s] 22c22 [ 56s] < BuildRequires: gettext [ 56s] --- [ 56s] > BuildRequires: gettext-tools [ 56s] ----------------------------------------------------------------- [ 56s] ----- building cryptsetup.spec (user abuild) [ 56s] ----------------------------------------------------------------- [ 56s] ----------------------------------------------------------------- [ 56s] Running qemu build hang workaround... [ 56s] /bin/ps command not found [ 57s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0.M2:Wearable/target-circle/20cb0375ece2f6af5b611ef473b7dfc9-cryptsetup' /home/abuild/rpmbuild/SOURCES/cryptsetup.spec [ 57s] Building target platforms: armv7l-tizen-linux [ 57s] Building for target armv7l-tizen-linux [ 57s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.3CWBHj [ 57s] + umask 022 [ 57s] + cd /home/abuild/rpmbuild/BUILD [ 57s] + cd /home/abuild/rpmbuild/BUILD [ 57s] + rm -rf cryptsetup-1.6.7 [ 57s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/cryptsetup-1.6.7.tar.xz [ 57s] + /bin/tar -xf - [ 57s] + STATUS=0 [ 57s] + '[' 0 -ne 0 ']' [ 57s] + cd cryptsetup-1.6.7 [ 57s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 57s] + echo 'Patch #0 (4c6390a-to-064b272.diff):' [ 57s] Patch #0 (4c6390a-to-064b272.diff): [ 57s] + /bin/patch -p1 --fuzz=2 [ 57s] + /bin/cat /home/abuild/rpmbuild/SOURCES/4c6390a-to-064b272.diff [ 57s] patching file autogen.sh [ 57s] + exit 0 [ 57s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.OiYORE [ 57s] + umask 022 [ 57s] + cd /home/abuild/rpmbuild/BUILD [ 57s] + cd cryptsetup-1.6.7 [ 57s] ++ uname -m [ 57s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 57s] + LANG=C [ 57s] + export LANG [ 57s] + unset DISPLAY [ 57s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 57s] + export CFLAGS [ 57s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 57s] + export CXXFLAGS [ 57s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 57s] + export FFLAGS [ 57s] + LDFLAGS= [ 57s] + export LDFLAGS [ 57s] + LD_AS_NEEDED=1 [ 57s] + export LD_AS_NEEDED [ 57s] + chmod +x ./autogen.sh [ 57s] + ./autogen.sh --prefix=/usr -localedir=/usr/share/locale [ 59s] [ 59s] Generate build-system by: [ 59s] autopoint: /bin/autopoint (GNU gettext-tools) 0.19.7 [ 60s] aclocal: aclocal (GNU automake) 1.14.1 [ 60s] autoconf: autoconf (GNU Autoconf) 2.69 [ 61s] automake: automake (GNU automake) 1.14.1 [ 61s] libtoolize: libtoolize (GNU libtool) 2.4.2 [ 61s] [ 67s] Copying file m4/codeset.m4 [ 67s] Copying file m4/glibc2.m4 [ 67s] Copying file m4/glibc21.m4 [ 67s] Copying file m4/intdiv0.m4 [ 67s] Copying file m4/intmax.m4 [ 67s] Copying file m4/inttypes-h.m4 [ 67s] Copying file m4/inttypes-pri.m4 [ 67s] Copying file m4/inttypes_h.m4 [ 67s] Copying file m4/lcmessage.m4 [ 68s] Copying file m4/lock.m4 [ 68s] Copying file m4/longdouble.m4 [ 68s] Copying file m4/longlong.m4 [ 68s] Copying file m4/printf-posix.m4 [ 68s] Copying file m4/signed.m4 [ 68s] Copying file m4/size_max.m4 [ 68s] Copying file m4/stdint_h.m4 [ 68s] Copying file m4/uintmax_t.m4 [ 68s] Copying file m4/ulonglong.m4 [ 68s] Copying file m4/visibility.m4 [ 68s] Copying file m4/wchar_t.m4 [ 68s] Copying file m4/wint_t.m4 [ 68s] Copying file m4/xsize.m4 [ 68s] Copying file po/Makevars.template [ 68s] libtoolize: putting auxiliary files in `.'. [ 68s] libtoolize: copying file `./ltmain.sh' [ 68s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 68s] libtoolize: copying file `m4/libtool.m4' [ 68s] libtoolize: copying file `m4/ltoptions.m4' [ 68s] libtoolize: copying file `m4/ltsugar.m4' [ 69s] libtoolize: copying file `m4/ltversion.m4' [ 69s] libtoolize: copying file `m4/lt~obsolete.m4' [ 90s] configure.ac:67: warning: The 'AM_PROG_MKDIR_P' macro is deprecated, and its use is discouraged. [ 90s] configure.ac:67: You should use the Autoconf-provided 'AC_PROG_MKDIR_P' macro instead, [ 90s] configure.ac:67: and use '$(MKDIR_P)' instead of '$(mkdir_p)'in your Makefile.am files. [ 96s] src/Makefile.am:12: warning: source file '$(top_builddir)/lib/utils_crypt.c' is in a subdirectory, [ 96s] src/Makefile.am:12: but option 'subdir-objects' is disabled [ 96s] automake: warning: possible forward-incompatibility. [ 96s] automake: At least a source file is in a subdirectory, but the 'subdir-objects' [ 96s] automake: automake option hasn't been enabled. For now, the corresponding output [ 96s] automake: object file(s) will be placed in the top-level directory. However, [ 96s] automake: this behaviour will change in future Automake versions: they will [ 96s] automake: unconditionally cause object files to be placed in the same subdirectory [ 96s] automake: of the corresponding sources. [ 96s] automake: You are advised to start using 'subdir-objects' option throughout your [ 96s] automake: project, to avoid future incompatibilities. [ 96s] src/Makefile.am:12: warning: source file '$(top_builddir)/lib/utils_loop.c' is in a subdirectory, [ 96s] src/Makefile.am:12: but option 'subdir-objects' is disabled [ 96s] src/Makefile.am:12: warning: source file '$(top_builddir)/lib/utils_fips.c' is in a subdirectory, [ 96s] src/Makefile.am:12: but option 'subdir-objects' is disabled [ 96s] src/Makefile.am:74: warning: source file '$(top_builddir)/lib/utils_crypt.c' is in a subdirectory, [ 96s] src/Makefile.am:74: but option 'subdir-objects' is disabled [ 96s] src/Makefile.am:45: warning: source file '$(top_builddir)/lib/utils_crypt.c' is in a subdirectory, [ 96s] src/Makefile.am:45: but option 'subdir-objects' is disabled [ 96s] src/Makefile.am:45: warning: source file '$(top_builddir)/lib/utils_loop.c' is in a subdirectory, [ 96s] src/Makefile.am:45: but option 'subdir-objects' is disabled [ 97s] tests/Makefile.am:44: warning: source file '$(top_srcdir)/lib/utils_loop.c' is in a subdirectory, [ 97s] tests/Makefile.am:44: but option 'subdir-objects' is disabled [ 103s] Running ./configure --prefix=/usr -localedir=/usr/share/locale ... [ 104s] checking whether make supports nested variables... yes [ 104s] checking for a BSD-compatible install... /bin/install -c [ 104s] checking whether build environment is sane... yes [ 104s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 104s] checking for gawk... gawk [ 104s] checking whether make sets $(MAKE)... yes [ 104s] checking build system type... armv7l-unknown-linux-gnueabi [ 104s] checking host system type... armv7l-unknown-linux-gnueabi [ 104s] checking for style of include used by make... GNU [ 104s] checking for gcc... gcc [ 104s] checking whether the C compiler works... yes [ 104s] checking for C compiler default output file name... a.out [ 104s] checking for suffix of executables... [ 104s] checking whether we are cross compiling... no [ 104s] checking for suffix of object files... o [ 104s] checking whether we are using the GNU C compiler... yes [ 104s] checking whether gcc accepts -g... yes [ 104s] checking for gcc option to accept ISO C89... none needed [ 104s] checking whether gcc understands -c and -o together... yes [ 104s] checking dependency style of gcc... gcc3 [ 104s] checking how to run the C preprocessor... gcc -E [ 104s] checking for grep that handles long lines and -e... /bin/grep [ 104s] checking for egrep... /bin/grep -E [ 104s] checking for ANSI C header files... yes [ 105s] checking for sys/types.h... yes [ 105s] checking for sys/stat.h... yes [ 105s] checking for stdlib.h... yes [ 105s] checking for string.h... yes [ 105s] checking for memory.h... yes [ 105s] checking for strings.h... yes [ 105s] checking for inttypes.h... yes [ 105s] checking for stdint.h... yes [ 105s] checking for unistd.h... yes [ 105s] checking minix/config.h usability... no [ 105s] checking minix/config.h presence... no [ 105s] checking for minix/config.h... no [ 105s] checking whether it is safe to define __EXTENSIONS__... yes [ 105s] checking for gcc... (cached) gcc [ 105s] checking whether we are using the GNU C compiler... (cached) yes [ 105s] checking whether gcc accepts -g... (cached) yes [ 105s] checking for gcc option to accept ISO C89... (cached) none needed [ 105s] checking whether gcc understands -c and -o together... (cached) yes [ 105s] checking dependency style of gcc... (cached) gcc3 [ 105s] checking how to run the C preprocessor... gcc -E [ 105s] checking whether make sets $(MAKE)... (cached) yes [ 105s] checking how to print strings... printf [ 105s] checking for a sed that does not truncate output... /bin/sed [ 105s] checking for fgrep... /bin/grep -F [ 105s] checking for ld used by gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 105s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 105s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 105s] checking the name lister (/bin/nm -B) interface... BSD nm [ 105s] checking whether ln -s works... yes [ 105s] checking the maximum length of command line arguments... 1572864 [ 105s] checking whether the shell understands some XSI constructs... yes [ 105s] checking whether the shell understands "+="... yes [ 105s] checking how to convert armv7l-unknown-linux-gnueabi file names to armv7l-unknown-linux-gnueabi format... func_convert_file_noop [ 105s] checking how to convert armv7l-unknown-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 105s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 105s] checking for objdump... objdump [ 105s] checking how to recognize dependent libraries... pass_all [ 105s] checking for dlltool... no [ 105s] checking how to associate runtime and link libraries... printf %s\n [ 105s] checking for ar... ar [ 105s] checking for archiver @FILE support... @ [ 105s] checking for strip... strip [ 105s] checking for ranlib... ranlib [ 105s] checking command to parse /bin/nm -B output from gcc object... ok [ 105s] checking for sysroot... no [ 105s] checking for mt... no [ 105s] checking if : is a manifest tool... no [ 105s] checking for dlfcn.h... yes [ 105s] checking for objdir... .libs [ 105s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 105s] checking for gcc option to produce PIC... -fPIC -DPIC [ 105s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 105s] checking if gcc static flag -static works... no [ 105s] checking if gcc supports -c -o file.o... yes [ 105s] checking if gcc supports -c -o file.o... (cached) yes [ 106s] checking whether the gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 106s] checking whether -lc should be explicitly linked in... no [ 106s] checking dynamic linker characteristics... GNU/Linux ld.so [ 106s] checking how to hardcode library paths into programs... immediate [ 106s] checking whether stripping libraries is possible... yes [ 106s] checking if libtool supports shared libraries... yes [ 106s] checking whether to build shared libraries... yes [ 106s] checking whether to build static libraries... no [ 106s] checking for pkg-config... /bin/pkg-config [ 106s] checking pkg-config is at least version 0.9.0... yes [ 106s] checking for dirent.h that defines DIR... yes [ 106s] checking for library containing opendir... none required [ 106s] checking for ANSI C header files... (cached) yes [ 106s] checking fcntl.h usability... yes [ 106s] checking fcntl.h presence... yes [ 106s] checking for fcntl.h... yes [ 106s] checking malloc.h usability... yes [ 106s] checking malloc.h presence... yes [ 106s] checking for malloc.h... yes [ 106s] checking for inttypes.h... (cached) yes [ 106s] checking sys/ioctl.h usability... yes [ 106s] checking sys/ioctl.h presence... yes [ 106s] checking for sys/ioctl.h... yes [ 106s] checking sys/mman.h usability... yes [ 106s] checking sys/mman.h presence... yes [ 106s] checking for sys/mman.h... yes [ 106s] checking ctype.h usability... yes [ 106s] checking ctype.h presence... yes [ 106s] checking for ctype.h... yes [ 106s] checking for unistd.h... (cached) yes [ 106s] checking locale.h usability... yes [ 106s] checking locale.h presence... yes [ 106s] checking for locale.h... yes [ 106s] checking byteswap.h usability... yes [ 106s] checking byteswap.h presence... yes [ 106s] checking for byteswap.h... yes [ 106s] checking endian.h usability... yes [ 106s] checking endian.h presence... yes [ 106s] checking for endian.h... yes [ 106s] checking uuid/uuid.h usability... yes [ 106s] checking uuid/uuid.h presence... yes [ 106s] checking for uuid/uuid.h... yes [ 106s] checking libdevmapper.h usability... yes [ 106s] checking libdevmapper.h presence... yes [ 106s] checking for libdevmapper.h... yes [ 106s] checking for uuid_clear in -luuid... yes [ 106s] checking for library containing clock_gettime... none required [ 107s] checking for posix_memalign... yes [ 107s] checking for clock_gettime... yes [ 107s] checking for an ANSI C-conforming const... yes [ 107s] checking whether byte ordering is bigendian... no [ 107s] checking for off_t... yes [ 107s] checking for special C compiler options needed for large files... no [ 107s] checking for _FILE_OFFSET_BITS value needed for large files... 64 [ 107s] checking for _LARGEFILE_SOURCE value needed for large files... no [ 107s] checking whether gcc needs -traditional... no [ 107s] checking whether strerror_r is declared... yes [ 107s] checking for strerror_r... yes [ 107s] checking whether strerror_r returns char *... yes [ 107s] checking whether NLS is requested... yes [ 107s] checking for msgfmt... /bin/msgfmt [ 107s] checking for gmsgfmt... /bin/msgfmt [ 107s] checking for xgettext... /bin/xgettext [ 107s] checking for msgmerge... /bin/msgmerge [ 107s] checking for ld used by GCC... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 107s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 107s] checking for shared library run path origin... done [ 107s] checking for CFPreferencesCopyAppValue... no [ 107s] checking for CFLocaleCopyCurrent... no [ 107s] checking for GNU gettext in libc... yes [ 107s] checking whether to use NLS... yes [ 107s] checking where the gettext function comes from... libc [ 107s] checking for poptConfigFileToString in -lpopt... yes [ 108s] checking for DEVMAPPER... yes [ 108s] checking whether dm_task_secure_data is declared... yes [ 108s] checking whether dm_task_retry_remove is declared... yes [ 108s] checking whether DM_UDEV_DISABLE_DISK_RULES_FLAG is declared... yes [ 108s] checking linux/if_alg.h usability... yes [ 108s] checking linux/if_alg.h presence... yes [ 108s] checking for linux/if_alg.h... yes [ 108s] checking for libgcrypt-config... /bin/libgcrypt-config [ 108s] checking for LIBGCRYPT - version >= 1.6.1... yes (1.7.1) [ 108s] configure: WARNING: [ 108s] *** [ 108s] *** The config script /bin/libgcrypt-config was [ 108s] *** built for armv7l-tizen-linux-gnueabi and thus may not match the [ 108s] *** used host armv7l-unknown-linux-gnueabi. [ 108s] *** You may want to use the configure option --with-libgcrypt-prefix [ 108s] *** to specify a matching config script or use $SYSROOT. [ 108s] *** [ 108s] checking for libgcrypt-config... (cached) /bin/libgcrypt-config [ 108s] checking for LIBGCRYPT - version >= 1.1.42... yes (1.7.1) [ 108s] configure: WARNING: [ 108s] *** [ 108s] *** The config script /bin/libgcrypt-config was [ 108s] *** built for armv7l-tizen-linux-gnueabi and thus may not match the [ 108s] *** used host armv7l-unknown-linux-gnueabi. [ 108s] *** You may want to use the configure option --with-libgcrypt-prefix [ 108s] *** to specify a matching config script or use $SYSROOT. [ 108s] *** [ 108s] checking if internal cryptsetup PBKDF2 is compiled-in... no [ 108s] checking that generated files are newer than configure... done [ 108s] configure: creating ./config.status [ 109s] config.status: creating Makefile [ 109s] config.status: creating lib/Makefile [ 109s] config.status: creating lib/libcryptsetup.pc [ 109s] config.status: creating lib/crypto_backend/Makefile [ 109s] config.status: creating lib/luks1/Makefile [ 109s] config.status: creating lib/loopaes/Makefile [ 109s] config.status: creating lib/verity/Makefile [ 109s] config.status: creating lib/tcrypt/Makefile [ 109s] config.status: creating src/Makefile [ 109s] config.status: creating po/Makefile.in [ 109s] config.status: creating man/Makefile [ 109s] config.status: creating tests/Makefile [ 109s] config.status: creating python/Makefile [ 109s] config.status: creating config.h [ 109s] config.status: executing depfiles commands [ 110s] config.status: executing libtool commands [ 111s] config.status: executing po-directories commands [ 111s] config.status: creating po/POTFILES [ 111s] config.status: creating po/Makefile [ 111s] Now type `make' to compile cryptsetup [ 111s] + make -j8 [ 111s] (CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/missing autoheader) [ 113s] rm -f stamp-h1 [ 113s] touch config.h.in [ 113s] cd . && /bin/sh ./config.status config.h [ 113s] config.status: creating config.h [ 113s] config.status: config.h is unchanged [ 113s] make all-recursive [ 113s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 113s] Making all in lib [ 113s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 113s] Making all in crypto_backend [ 113s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/crypto_backend' [ 113s] CC libcrypto_backend_la-crypto_cipher_kernel.lo [ 113s] CC libcrypto_backend_la-crypto_storage.lo [ 113s] CC libcrypto_backend_la-pbkdf_check.lo [ 113s] CC libcrypto_backend_la-crypto_gcrypt.lo [ 113s] CC libcrypto_backend_la-crc32.lo [ 114s] CCLD libcrypto_backend.la [ 114s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/crypto_backend' [ 114s] Making all in luks1 [ 114s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/luks1' [ 114s] CC libluks1_la-af.lo [ 114s] CC libluks1_la-keymanage.lo [ 114s] CC libluks1_la-keyencryption.lo [ 114s] CCLD libluks1.la [ 114s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/luks1' [ 114s] Making all in loopaes [ 114s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/loopaes' [ 114s] CC libloopaes_la-loopaes.lo [ 114s] CCLD libloopaes.la [ 114s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/loopaes' [ 114s] Making all in verity [ 114s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/verity' [ 114s] CC libverity_la-verity.lo [ 114s] CC libverity_la-verity_hash.lo [ 115s] CCLD libverity.la [ 115s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/verity' [ 115s] Making all in tcrypt [ 115s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/tcrypt' [ 115s] CC libtcrypt_la-tcrypt.lo [ 115s] CCLD libtcrypt.la [ 115s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/tcrypt' [ 115s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 115s] CC libcryptsetup_la-setup.lo [ 115s] CC libcryptsetup_la-utils_benchmark.lo [ 115s] CC libcryptsetup_la-utils.lo [ 115s] CC libcryptsetup_la-utils_crypt.lo [ 115s] CC libcryptsetup_la-utils_loop.lo [ 115s] CC libcryptsetup_la-utils_devpath.lo [ 115s] CC libcryptsetup_la-utils_wipe.lo [ 115s] CC libcryptsetup_la-utils_fips.lo [ 116s] CC libcryptsetup_la-utils_device.lo [ 116s] CC libcryptsetup_la-libdevmapper.lo [ 116s] CC libcryptsetup_la-volumekey.lo [ 116s] CC libcryptsetup_la-random.lo [ 116s] CC libcryptsetup_la-crypt_plain.lo [ 117s] CCLD libcryptsetup.la [ 117s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 117s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 117s] Making all in src [ 117s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/src' [ 117s] CC cryptsetup-utils_loop.o [ 117s] CC cryptsetup-utils_crypt.o [ 117s] CC cryptsetup-utils_tools.o [ 117s] CC cryptsetup-utils_fips.o [ 117s] CC cryptsetup-utils_password.o [ 117s] CC cryptsetup-cryptsetup.o [ 117s] CC veritysetup-utils_crypt.o [ 117s] CC veritysetup-utils_loop.o [ 117s] CC veritysetup-utils_tools.o [ 117s] CC veritysetup-veritysetup.o [ 117s] CCLD veritysetup [ 117s] CCLD cryptsetup [ 118s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/src' [ 118s] Making all in man [ 118s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/man' [ 118s] make[2]: Nothing to be done for 'all'. [ 118s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/man' [ 118s] Making all in python [ 118s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/python' [ 118s] make[2]: Nothing to be done for 'all'. [ 118s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/python' [ 118s] Making all in tests [ 118s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/tests' [ 118s] make[2]: Nothing to be done for 'all'. [ 118s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/tests' [ 118s] Making all in po [ 118s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/po' [ 118s] make[2]: Nothing to be done for 'all'. [ 118s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/po' [ 118s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 118s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 118s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 118s] + exit 0 [ 118s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.5ddEBT [ 118s] + umask 022 [ 118s] + cd /home/abuild/rpmbuild/BUILD [ 118s] + cd cryptsetup-1.6.7 [ 118s] + LANG=C [ 118s] + export LANG [ 118s] + unset DISPLAY [ 118s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm [ 118s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm [ 118s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm [ 118s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm install [ 118s] Making install in lib [ 118s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 118s] Making install in crypto_backend [ 118s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/crypto_backend' [ 118s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/crypto_backend' [ 118s] make[3]: Nothing to be done for 'install-exec-am'. [ 118s] make[3]: Nothing to be done for 'install-data-am'. [ 118s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/crypto_backend' [ 118s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/crypto_backend' [ 118s] Making install in luks1 [ 118s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/luks1' [ 118s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/luks1' [ 118s] make[3]: Nothing to be done for 'install-exec-am'. [ 118s] make[3]: Nothing to be done for 'install-data-am'. [ 118s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/luks1' [ 118s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/luks1' [ 118s] Making install in loopaes [ 118s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/loopaes' [ 118s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/loopaes' [ 118s] make[3]: Nothing to be done for 'install-exec-am'. [ 118s] make[3]: Nothing to be done for 'install-data-am'. [ 118s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/loopaes' [ 118s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/loopaes' [ 118s] Making install in verity [ 118s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/verity' [ 118s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/verity' [ 118s] make[3]: Nothing to be done for 'install-exec-am'. [ 118s] make[3]: Nothing to be done for 'install-data-am'. [ 118s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/verity' [ 118s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/verity' [ 118s] Making install in tcrypt [ 118s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/tcrypt' [ 118s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/tcrypt' [ 118s] make[3]: Nothing to be done for 'install-exec-am'. [ 118s] make[3]: Nothing to be done for 'install-data-am'. [ 118s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/tcrypt' [ 118s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/tcrypt' [ 118s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 118s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 118s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/lib' [ 118s] /bin/sh ../libtool --mode=install /bin/install -c libcryptsetup.la '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/lib' [ 118s] libtool: install: /bin/install -c .libs/libcryptsetup.so.4.7.0 /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/lib/libcryptsetup.so.4.7.0 [ 118s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/lib && { ln -s -f libcryptsetup.so.4.7.0 libcryptsetup.so.4 || { rm -f libcryptsetup.so.4 && ln -s libcryptsetup.so.4.7.0 libcryptsetup.so.4; }; }) [ 118s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/lib && { ln -s -f libcryptsetup.so.4.7.0 libcryptsetup.so || { rm -f libcryptsetup.so && ln -s libcryptsetup.so.4.7.0 libcryptsetup.so; }; }) [ 118s] libtool: install: /bin/install -c .libs/libcryptsetup.lai /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/lib/libcryptsetup.la [ 118s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 118s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/include' [ 118s] /bin/install -c -m 644 libcryptsetup.h '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/include' [ 118s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/lib/pkgconfig' [ 118s] /bin/install -c -m 644 libcryptsetup.pc '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/lib/pkgconfig' [ 118s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 118s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 118s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 118s] Making install in src [ 118s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/src' [ 118s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/src' [ 118s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/sbin' [ 118s] /bin/sh ../libtool --mode=install /bin/install -c cryptsetup veritysetup '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/sbin' [ 118s] libtool: install: warning: `../lib/libcryptsetup.la' has not been installed in `/usr/lib' [ 118s] libtool: install: /bin/install -c .libs/cryptsetup /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/sbin/cryptsetup [ 118s] libtool: install: warning: `../lib/libcryptsetup.la' has not been installed in `/usr/lib' [ 118s] libtool: install: /bin/install -c .libs/veritysetup /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/sbin/veritysetup [ 118s] make[2]: Nothing to be done for 'install-data-am'. [ 118s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/src' [ 118s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/src' [ 118s] Making install in man [ 118s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/man' [ 118s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/man' [ 118s] make[2]: Nothing to be done for 'install-exec-am'. [ 118s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/man/man8' [ 118s] /bin/install -c -m 644 cryptsetup.8 veritysetup.8 '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/man/man8' [ 118s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/man' [ 118s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/man' [ 118s] Making install in python [ 118s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/python' [ 118s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/python' [ 118s] make[2]: Nothing to be done for 'install-data-am'. [ 118s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/python' [ 118s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/python' [ 118s] Making install in tests [ 118s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/tests' [ 118s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/tests' [ 118s] make[2]: Nothing to be done for 'install-exec-am'. [ 118s] make[2]: Nothing to be done for 'install-data-am'. [ 118s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/tests' [ 118s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/tests' [ 118s] Making install in po [ 118s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/po' [ 118s] /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share [ 118s] installing cs.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/locale/cs/LC_MESSAGES/cryptsetup.mo [ 118s] installing de.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/locale/de/LC_MESSAGES/cryptsetup.mo [ 118s] installing es.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/locale/es/LC_MESSAGES/cryptsetup.mo [ 118s] installing fi.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/locale/fi/LC_MESSAGES/cryptsetup.mo [ 118s] installing fr.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/locale/fr/LC_MESSAGES/cryptsetup.mo [ 118s] installing id.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/locale/id/LC_MESSAGES/cryptsetup.mo [ 118s] installing it.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/locale/it/LC_MESSAGES/cryptsetup.mo [ 118s] installing nl.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/locale/nl/LC_MESSAGES/cryptsetup.mo [ 118s] installing pl.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/locale/pl/LC_MESSAGES/cryptsetup.mo [ 118s] installing sv.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/locale/sv/LC_MESSAGES/cryptsetup.mo [ 118s] installing uk.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/locale/uk/LC_MESSAGES/cryptsetup.mo [ 118s] installing vi.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/locale/vi/LC_MESSAGES/cryptsetup.mo [ 118s] if test "cryptsetup" = "gettext-tools"; then \ [ 118s] /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/gettext/po; \ [ 118s] for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ [ 118s] /bin/install -c -m 644 ./$file \ [ 118s] /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/gettext/po/$file; \ [ 118s] done; \ [ 118s] for file in Makevars; do \ [ 118s] rm -f /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/gettext/po/$file; \ [ 118s] done; \ [ 118s] else \ [ 118s] : ; \ [ 118s] fi [ 118s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/po' [ 118s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 118s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 118s] make[2]: Nothing to be done for 'install-exec-am'. [ 118s] make[2]: Nothing to be done for 'install-data-am'. [ 118s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 118s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 118s] + rm -f /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/info/dir [ 119s] + find /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm -regex '.*\.la$' [ 119s] + xargs rm -f -- [ 119s] + find /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm -regex '.*\.a$' [ 119s] + xargs rm -f -- [ 119s] + cp -a /home/abuild/rpmbuild/SOURCES/cryptsetup.manifest /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/binary_package_name.manifest [ 119s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7 [ 119s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/lib/libcryptsetup.so.4.7.0 [ 119s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/sbin/cryptsetup [ 119s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/sbin/veritysetup [ 119s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 119s] cpio: glibc-2.20/csu/init.c: Cannot stat: No such file or directory [ 119s] cpio: glibc-2.20/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 119s] cpio: glibc-2.20/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 119s] cpio: glibc-2.20/sysdeps/arm/start.S: Cannot stat: No such file or directory [ 119s] 858 blocks [ 119s] + /usr/lib/rpm/check-buildroot [ 119s] + /usr/lib/rpm//brp-compress [ 119s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 119s] + /usr/lib/rpm/brp-python-hardlink [ 119s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm [ 120s] Processing files: cryptsetup-1.6.7-1.1.armv7l [ 120s] Aptk: PG1hbmlmZXN0PgogICAgICAgIDxyZXF1ZXN0PgogICAgICAgICAgICAgICAgPGRv [ 120s] bWFpbiBuYW1lPSJfIi8+CiAgICAgICAgPC9yZXF1ZXN0Pgo8L21hbmlmZXN0PgoK [ 120s] [ 120s] Provides: cryptsetup = 1.6.7-1.1 cryptsetup(armv7l-32) = 1.6.7-1.1 libcryptsetup.so.4 libcryptsetup.so.4(CRYPTSETUP_1.0) [ 120s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 120s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 120s] Requires(post): /sbin/ldconfig [ 120s] Requires(postun): /sbin/ldconfig [ 120s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.15) libc.so.6(GLIBC_2.17) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libc.so.6(GLIBC_2.8) libcryptsetup.so.4 libcryptsetup.so.4(CRYPTSETUP_1.0) libdevmapper.so.1.02 libdevmapper.so.1.02(Base) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libgcrypt.so.20 libgcrypt.so.20(GCRYPT_1.6) libpopt.so.0 libpopt.so.0(LIBPOPT_0) libuuid.so.1 libuuid.so.1(UUID_1.0) rtld(GNU_HASH) [ 120s] Processing files: cryptsetup-debugsource-1.6.7-1.1.armv7l [ 120s] Provides: cryptsetup-debugsource = 1.6.7-1.1 cryptsetup-debugsource(armv7l-32) = 1.6.7-1.1 [ 120s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 120s] Processing files: cryptsetup-devel-1.6.7-1.1.armv7l [ 120s] Provides: cryptsetup-devel = 1.6.7-1.1 cryptsetup-devel(armv7l-32) = 1.6.7-1.1 pkgconfig(libcryptsetup) = 1.6.7 [ 120s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 120s] Requires: /usr/bin/pkg-config libcryptsetup.so.4 [ 120s] Processing files: cryptsetup-locale-1.6.7-1.1.armv7l [ 120s] Provides: cryptsetup-locale = 1.6.7-1.1 cryptsetup-locale(armv7l-32) = 1.6.7-1.1 [ 120s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 120s] Processing files: cryptsetup-doc-1.6.7-1.1.armv7l [ 120s] Provides: cryptsetup-doc = 1.6.7-1.1 cryptsetup-doc(armv7l-32) = 1.6.7-1.1 [ 120s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 120s] Processing files: cryptsetup-debuginfo-1.6.7-1.1.armv7l [ 120s] warning: File listed twice: /usr/lib/debug/.build-id [ 120s] warning: File listed twice: /usr/lib/debug/.build-id [ 120s] Provides: cryptsetup-debuginfo = 1.6.7-1.1 cryptsetup-debuginfo(armv7l-32) = 1.6.7-1.1 [ 120s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 120s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm [ 120s] warning: Could not canonicalize hostname: w01 [ 120s] Wrote: /home/abuild/rpmbuild/SRPMS/cryptsetup-1.6.7-1.1.src.rpm [ 120s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/cryptsetup-1.6.7-1.1.armv7l.rpm [ 120s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/cryptsetup-debugsource-1.6.7-1.1.armv7l.rpm [ 120s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/cryptsetup-devel-1.6.7-1.1.armv7l.rpm [ 120s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/cryptsetup-locale-1.6.7-1.1.armv7l.rpm [ 120s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/cryptsetup-doc-1.6.7-1.1.armv7l.rpm [ 120s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/cryptsetup-debuginfo-1.6.7-1.1.armv7l.rpm [ 120s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.hG5c0K [ 120s] + umask 022 [ 120s] + cd /home/abuild/rpmbuild/BUILD [ 120s] + cd cryptsetup-1.6.7 [ 120s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm [ 120s] + exit 0 [ 121s] ... checking for files with abuild user/group [ 121s] ... creating baselibs [ 121s] ... saving built statistics [ 121s] ... saving built packages [ 122s] /home/abuild/rpmbuild/RPMS/armv7l/cryptsetup-1.6.7-1.1.armv7l.rpm [ 122s] /home/abuild/rpmbuild/RPMS/armv7l/cryptsetup-debuginfo-1.6.7-1.1.armv7l.rpm [ 122s] /home/abuild/rpmbuild/RPMS/armv7l/cryptsetup-debugsource-1.6.7-1.1.armv7l.rpm [ 122s] /home/abuild/rpmbuild/RPMS/armv7l/cryptsetup-devel-1.6.7-1.1.armv7l.rpm [ 122s] /home/abuild/rpmbuild/RPMS/armv7l/cryptsetup-doc-1.6.7-1.1.armv7l.rpm [ 122s] /home/abuild/rpmbuild/RPMS/armv7l/cryptsetup-locale-1.6.7-1.1.armv7l.rpm [ 122s] /home/abuild/rpmbuild/SRPMS/cryptsetup-1.6.7-1.1.src.rpm [ 122s] /home/abuild/rpmbuild/OTHER/_statistics [ 122s] [ 122s] w01 finished "build cryptsetup.spec" at Thu Jan 5 03:12:52 UTC 2017. [ 122s] [ 123s] /.build/build: line 368: 244 Killed background_monitor_process [ 125s] [ 113.504073] SysRq : Power Off [ 125s] [ 113.928543] Power down. [ 126s] build: extracting built packages... [ 126s] cryptsetup-1.6.7-1.1.armv7l.rpm [ 126s] cryptsetup-debuginfo-1.6.7-1.1.armv7l.rpm [ 126s] cryptsetup-debugsource-1.6.7-1.1.armv7l.rpm [ 126s] cryptsetup-devel-1.6.7-1.1.armv7l.rpm [ 126s] cryptsetup-doc-1.6.7-1.1.armv7l.rpm [ 126s] cryptsetup-locale-1.6.7-1.1.armv7l.rpm [ 126s] cryptsetup-1.6.7-1.1.src.rpm [ 126s] _statistics