[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obspw05 started "build _service:gbs:ise-engine-hangul.spec" at Tue Sep 8 00:14:44 UTC 2020. [ 0s] [ 0s] Building ise-engine-hangul for project 'Tizen:4.0:Unified' repository 'standard' arch 'armv7l' srcmd5 '808267c5ea65bafdeb5d888ae9386f70' [ 0s] [ 0s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:ise-engine-hangul.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:ise-engine-hangul.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:ise-engine-hangul.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling setup... [ 1s] [3/40] preinstalling filesystem... [ 1s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling libgcc... [ 1s] [6/40] preinstalling bash... [ 1s] [7/40] preinstalling diffutils... [ 1s] [8/40] preinstalling grep... [ 1s] [9/40] preinstalling libattr... [ 1s] [10/40] preinstalling libbz2... [ 1s] [11/40] preinstalling libcap... [ 1s] [12/40] preinstalling libelf... [ 1s] [13/40] preinstalling libfreebl3... [ 1s] [14/40] preinstalling liblua... [ 1s] [15/40] preinstalling liblzma... [ 1s] [16/40] preinstalling libncurses... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libsmack... [ 1s] [19/40] preinstalling libsqlite... [ 1s] [20/40] preinstalling libuuid... [ 1s] [21/40] preinstalling nspr... [ 1s] [22/40] preinstalling sed... [ 1s] [23/40] preinstalling zlib... [ 1s] [24/40] preinstalling qemu-accel-x86_64-armv7l... [ 6s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 6s] [26/40] preinstalling coreutils... [ 7s] [27/40] preinstalling libacl... [ 7s] [28/40] preinstalling libblkid... [ 7s] [29/40] preinstalling libreadline... [ 7s] [30/40] preinstalling smack... [ 7s] [31/40] preinstalling bzip2... [ 7s] [32/40] preinstalling libmagic... [ 7s] [33/40] preinstalling libxml2... [ 7s] [34/40] preinstalling libmount... [ 7s] [35/40] preinstalling tar... [ 7s] [36/40] preinstalling util-linux... [ 7s] [37/40] preinstalling util-linux-su... [ 7s] [38/40] preinstalling nss... [ 7s] [39/40] preinstalling libsoftokn3... [ 7s] [40/40] preinstalling rpm... [ 7s] [ 7s] running qemu-linux-user-x86_64-cross postinstall script [ 7s] running qemu-accel-x86_64-armv7l postinstall script [ 7s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/6.2.1/liblto_plugin.so': No such file or directory [ 7s] running setup postinstall script [ 7s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 7s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 7s] initializing rpm db... [ 7s] reordering...cycle: gio-branding-upstream -> libgio [ 7s] breaking dependency libgio -> gio-branding-upstream [ 7s] cycle: pkgmgr-info -> pkgmgr-info-parser [ 7s] breaking dependency pkgmgr-info -> pkgmgr-info-parser [ 7s] cycle: libkey-manager-client -> key-manager [ 7s] breaking dependency key-manager -> libkey-manager-client [ 7s] cycle: libsecurity-manager-client -> security-manager [ 7s] breaking dependency security-manager -> libsecurity-manager-client [ 7s] cycle: libsecurity-manager-client -> security-manager -> security-license-manager [ 7s] breaking dependency security-manager -> security-license-manager [ 7s] cycle: security-manager -> security-manager-policy [ 7s] breaking dependency security-manager -> security-manager-policy [ 7s] cycle: xmlsec1-openssl -> xmlsec1 [ 7s] breaking dependency xmlsec1-openssl -> xmlsec1 [ 7s] cycle: efl -> eina [ 7s] breaking dependency efl -> eina [ 7s] cycle: efl -> eo [ 7s] breaking dependency eo -> efl [ 7s] cycle: efl -> eo -> eina [ 7s] breaking dependency eo -> eina [ 7s] cycle: ecore-evas -> ecore-input-evas -> evas [ 7s] breaking dependency ecore-evas -> ecore-input-evas [ 7s] cycle: ecore-evas -> evas [ 7s] breaking dependency ecore-evas -> evas [ 7s] cycle: isf -> org.tizen.isf-kbd-mode-changer [ 7s] breaking dependency isf -> org.tizen.isf-kbd-mode-changer [ 7s] cycle: libsoftokn3 -> nss [ 7s] breaking dependency nss -> libsoftokn3 [ 7s] done [ 8s] [1/260] installing boost-license-1.58.0-4.1 [ 8s] [2/260] installing ca-certificates-tizen-0.2.0-3.1 [ 8s] [3/260] installing default-ac-domains-0.1-2.1 [ 8s] [4/260] installing libmagic-data-5.37-7.7 [ 8s] [5/260] installing setup-0.9-3.13 [ 8s] warning: /etc/profile created as /etc/profile.rpmnew [ 8s] [6/260] installing filesystem-3.1-4.1 [ 8s] [7/260] installing glibc-2.24-7.20 [ 9s] [8/260] installing libatomic-6.2.1-7.14 [ 9s] [9/260] installing libgcc-6.2.1-7.14 [ 9s] [10/260] installing bash-3.2.57-4.1 [ 9s] [11/260] installing binutils-2.27-3.44 [ 10s] [12/260] installing capi-base-common-0.4.20-6.1 [ 10s] [13/260] installing cpio-2.11-2.1 [ 10s] [14/260] installing diffutils-3.3-2.1 [ 10s] [15/260] installing findutils-4.3.8-3.64 [ 10s] [16/260] installing fribidi-0.19.7-2.1 [ 10s] [17/260] installing giflib-5.1.2-2.1 [ 11s] [18/260] installing hostname-3.12-2.1 [ 11s] [19/260] installing iniparser-3.2-2.1 [ 11s] [20/260] installing libattr-2.4.47-3.66 [ 11s] [21/260] installing libbz2-1.0.6-4.20 [ 12s] [22/260] installing libcap-2.24-2.62 [ 12s] [23/260] installing libdrm-2.4.75-5.1 [ 12s] [24/260] installing libelf-0.153-2.24 [ 13s] [25/260] installing libelf0-0.8.13-5.1 [ 13s] [26/260] installing libevdev-1.2.2-2.1 [ 13s] [27/260] installing libexpat-2.2.7-3.18 [ 14s] [28/260] installing libext2fs-1.43.4-2.1 [ 14s] [29/260] installing libffi-3.1-2.1 [ 14s] [30/260] installing libfreebl3-3.34.1-3.46 [ 15s] [31/260] installing libgfortran-6.2.1-7.14 [ 15s] [32/260] installing libgomp-6.2.1-7.14 [ 15s] [33/260] installing libgpg-error-1.27-3.1 [ 16s] [34/260] installing libhyphen-2.8.8-2.1 [ 16s] [35/260] installing libitm-6.2.1-7.14 [ 16s] [36/260] installing libjpeg-8.0.2-3.1 [ 17s] [37/260] installing libjson-0.12-2.1 [ 17s] [38/260] installing libltdl-2.4.2-2.53 [ 17s] [39/260] installing liblua-5.1.5-3.9 [ 18s] [40/260] installing liblzma-5.2.2-2.52 [ 18s] [41/260] installing libmtdev-1.1.5-2.1 [ 18s] [42/260] installing libogg-1.3.2-2.1 [ 19s] [43/260] installing libpcre-8.41-4.1 [ 19s] [44/260] installing libpopt-1.16-2.15 [ 19s] [45/260] installing libpython-2.7.17-6.5 [ 20s] [46/260] installing libsmack-1.3.1-4.59 [ 20s] [47/260] installing libsmartcols-2.30-8.1 [ 20s] [48/260] installing libsqlite-3.21.0-10.1 [ 21s] [49/260] installing libstdc++-6.2.1-7.14 [ 21s] [50/260] installing libuuid-2.30-8.1 [ 21s] [51/260] installing libwayland-egl-1.2.3-18.1 [ 22s] [52/260] installing libxkbcommon-0.4.3-5.2 [ 22s] [53/260] installing m4-1.4.17-2.1 [ 22s] [54/260] installing net-tools-2.0_20121208git-2.1 [ 22s] [55/260] installing nspr-4.12-3.14 [ 22s] [56/260] installing patch-2.7-2.15 [ 22s] [57/260] installing pixman-0.32.6-2.1 [ 23s] [58/260] installing pkg-config-0.28-3.63 [ 23s] [59/260] installing sed-4.1c-2.1 [ 23s] [60/260] installing update-alternatives-1.18.15-2.1 [ 23s] [61/260] installing which-2.20-2.1 [ 23s] [62/260] installing xdgmime-0.0.13-4.1 [ 23s] [63/260] installing zlib-1.2.11-3.65 [ 23s] [64/260] installing shadow-utils-4.1.4.2-3.1 [ 23s] [65/260] installing build-compare-2015.04.28-2.37 [ 24s] [66/260] installing libstdc++-devel-6.2.1-7.14 [ 24s] [67/260] installing qemu-linux-user-x86_64-cross-2.7.0-1.5.1 [ 25s] [68/260] installing terminfo-base-full-5.9-3.52 [ 26s] [69/260] installing cpp-6.2.1-7.14 [ 26s] [70/260] installing gcc-c++-6.2.1-7.14 [ 27s] [71/260] installing sensord-dummy-4.0.3-13.1 [ 27s] [72/260] installing coreutils-6.9-3.1 [ 28s] [73/260] installing db4-4.8.30.NC-3.65 [ 28s] [74/260] installing gawk-3.1.5-3.2 [ 28s] [75/260] installing grep-2.5.2-3.1 [ 28s] [76/260] installing libacl-2.2.52-2.62 [ 28s] [77/260] installing libasm-0.153-2.24 [ 29s] [78/260] installing libblkid-2.30-8.1 [ 29s] [79/260] installing libcap-tools-2.24-2.62 [ 29s] [80/260] installing libcc1-6.2.1-7.14 [ 29s] [81/260] installing libgcrypt-1.8.3-4.1 [ 30s] [82/260] installing libglib-2.52.2-12.1 [ 30s] [83/260] installing libhangul-0.1.0-2.1 [ 31s] [84/260] installing libnss-security-manager-1.3.6-19.2 [ 31s] [85/260] installing libopenssl-1.0.2t-8.9 [ 32s] [86/260] installing libpcreposix-8.41-4.1 [ 32s] [87/260] installing libpng-1.6.21-3.1 [ 32s] [88/260] installing libubsan-6.2.1-7.14 [ 33s] [89/260] installing libvorbis-1.3.4-2.1 [ 33s] [90/260] installing make-4.0-2.23 [ 33s] [91/260] installing minizip-1.2.11-3.65 [ 34s] [92/260] installing nss-certs-3.34.1-3.46 [ 34s] [93/260] installing smack-1.3.1-4.59 [ 34s] [94/260] installing boost-program-options-1.58.0-4.1 [ 34s] [95/260] installing bzip2-1.0.6-4.20 [ 34s] [96/260] installing gettext-runtime-0.19.7-2.24 [ 34s] [97/260] installing libicu-58.2-1.1 [ 35s] [98/260] installing libkmod-24-2.1 [ 36s] [99/260] installing libmagic-5.37-7.7 [ 37s] [100/260] installing libpcrecpp-8.41-4.1 [ 37s] [101/260] installing libxml2-2.9.7-3.61 [ 38s] [102/260] installing ttrace-1.0.3-9.1 [ 38s] [103/260] installing xz-5.2.2-2.52 [ 38s] [104/260] installing cynara-db-migration-0.14.401-9.1 [ 38s] [105/260] installing libdw-0.153-2.24 [ 39s] [106/260] installing libtiff-4.0.9-3.1 [ 39s] [107/260] installing libhangul-devel-0.1.0-2.1 [ 39s] [108/260] installing linux-glibc-devel-3.10-2.67 [ 40s] [109/260] installing file-5.37-7.7 [ 40s] [110/260] installing glibc-locale-2.24-7.20 [ 40s] [111/260] installing libgmodule-2.52.2-12.1 [ 41s] [112/260] installing libgthread-2.52.2-12.1 [ 41s] [113/260] installing libmount-2.30-8.1 [ 41s] [114/260] installing libncurses-5.9-3.52 [ 42s] [115/260] installing libncurses6-5.9-3.52 [ 42s] [116/260] installing openssl-1.0.2t-8.9 [ 42s] [117/260] installing security-config-1.0-33.1 [ 50s] groupadd: group 'dbus' already exists [ 50s] [118/260] installing tar-1.17-3.1 [ 50s] [119/260] installing tizen-platform-config-4.0-9.1 [ 51s] [120/260] installing gzip-1.3.12-4.62 [ 51s] [121/260] installing libfdisk-2.30-8.1 [ 51s] [122/260] installing libfreetype-2.8-3.1 [ 51s] [123/260] installing libgobject-2.52.2-12.1 [ 52s] [124/260] installing libsndfile-1.0.28-5.1 [ 52s] [125/260] installing libxslt-1.1.31-7.1 [ 52s] [126/260] installing pam-1.1.6-3.1 [ 53s] [127/260] installing perl-5.20.0-4.27 [ 54s] [128/260] installing tzdata-2017c-3.3 [ 55s] [129/260] installing pcre-devel-8.41-4.1 [ 55s] [130/260] installing elfutils-0.153-2.24 [ 55s] [131/260] installing libcynara-commons-0.14.401-9.1 [ 56s] [132/260] installing shared-mime-info-1.7-2.2 [ 63s] [133/260] installing gcc-6.2.1-7.14 [ 64s] [134/260] installing build-mkbaselibs-20120927-2.1 [ 64s] [135/260] installing ca-certificates-0.0.4-3.1 [ 64s] [136/260] installing glibc-devel-2.24-7.20 [ 64s] [137/260] installing qemu-accel-x86_64-armv7l-0.4-4.17 [ 69s] [138/260] installing autoconf-2.69-2.69 [ 70s] [139/260] installing less-466-2.1 [ 70s] [140/260] installing libreadline-5.2-2.62 [ 70s] [141/260] installing libtzplatform-config-4.0-9.1 [ 71s] [142/260] installing procps-ng-3.3.15-6.1 [ 71s] [143/260] installing libcynara-agent-0.14.401-9.1 [ 71s] [144/260] installing libcynara-client-0.14.401-9.1 [ 72s] [145/260] installing libcynara-creds-commons-0.14.401-9.1 [ 72s] [146/260] installing libcynara-session-0.14.401-9.1 [ 72s] [147/260] installing libcynara-admin-0.14.401-9.1 [ 73s] [148/260] installing libharfbuzz-1.4.6-3.1 [ 73s] [149/260] installing libsystemd-231-15.1 [ 73s] [150/260] installing fontconfig-2.12.1-4.1 [ 74s] [151/260] installing systemd-231-15.1 [ 75s] [152/260] installing argos_watchdog-0.0.1-2.1 [ 75s] [153/260] installing dbus-libs-1.10.6-14.1 [ 76s] [154/260] installing tizen-platform-config-tools-4.0-9.1 [ 76s] [155/260] installing automake-1.14.1-3.52 [ 76s] [156/260] installing sqlite-3.21.0-10.1 [ 76s] [157/260] installing build-20120927-2.1 [ 76s] [158/260] installing cyad-0.14.401-9.1 [ 76s] [159/260] installing libcynara-creds-socket-0.14.401-9.1 [ 77s] [160/260] installing libdlog-5.0.2-16.1 [ 78s] Running in chroot, ignoring request. [ 78s] Running libdlog %posttrans script [ 78s] [161/260] installing libinput-0.11.0-4.1 [ 78s] [162/260] installing cynara-0.14.401-9.1 [ 78s] Running in chroot, ignoring request. [ 78s] Running in chroot, ignoring request. [ 78s] [163/260] installing python-2.7.17-6.5 [ 79s] [164/260] installing util-linux-2.30-8.1 [ 80s] [165/260] installing libtool-2.4.2-2.53 [ 80s] [166/260] installing libwayland-client-1.13.0-5.2 [ 80s] [167/260] installing libwayland-server-1.13.0-5.2 [ 80s] [168/260] installing python-xml-2.7.17-6.5 [ 80s] [169/260] installing util-linux-su-2.30-8.1 [ 80s] [170/260] installing gettext-tools-0.19.7-2.24 [ 81s] [171/260] installing libkey-manager-common-0.1.26-11.2 [ 81s] [172/260] installing libpulse-5.0-8.1 [ 82s] [173/260] installing capi-system-info-0.2.1-7.1 [ 82s] Running capi-system-info %posttrans script [ 82s] I/O warning : failed to load external entity "/etc/config/model-config.xml" [ 82s] iniparser: cannot open /etc/info.ini [ 82s] [174/260] installing libwayland-extension-client-1.1.27-8.1 [ 82s] [175/260] installing libwayland-cursor-1.13.0-5.2 [ 83s] [176/260] installing pkgmgr-0.9.3-6.1 [ 84s] Running pkgmgr %posttrans script [ 84s] /var/tmp/rpm-tmp.o4xXRE: line 4: pkg_initdb: command not found [ 84s] /var/tmp/rpm-tmp.o4xXRE: line 5: install_preload_pkg: command not found [ 84s] /var/tmp/rpm-tmp.o4xXRE: line 12: pkgcmd: command not found [ 84s] /var/tmp/rpm-tmp.o4xXRE: line 14: /etc/package-manager/pkgmgr-label-initial-image.sh: No such file or directory [ 84s] [177/260] installing libtbm-2.1.14-12.1 [ 84s] [178/260] installing libwayland-tbm-client-0.2.2-6.1 [ 85s] [179/260] installing libwayland-tbm-server-0.2.2-6.1 [ 85s] [180/260] installing libtdm-1.8.12-16.1 [ 86s] [181/260] installing libgbm-1.0.1-2.1 [ 86s] [182/260] installing libtdm-client-1.8.12-16.1 [ 86s] [183/260] installing libtpl-egl-1.4.21-18.1 [ 86s] [184/260] installing coregl-0.1.10-3.37 [ 87s] [185/260] installing eo-1.16.0-38.30 [ 87s] [186/260] installing nss-3.34.1-3.46 [ 87s] [187/260] installing xmlsec1-openssl-1.2.22-2.2 [ 88s] [188/260] installing libgio-2.52.2-12.1 [ 88s] [189/260] installing gio-branding-upstream-2.52.2-12.1 [ 88s] [190/260] installing efl-1.16.0-38.30 [ 88s] [191/260] installing libjson-glib-1.2.0-5.1 [ 89s] [192/260] installing libsoftokn3-3.34.1-3.46 [ 89s] [193/260] installing glib2-tools-2.52.2-12.1 [ 89s] [194/260] installing xmlsec1-1.2.22-2.2 [ 89s] [195/260] installing rpm-4.11.0.1-5.39 [ 90s] [196/260] installing buxton2-1.3.9-22.1 [ 91s] Running buxton2 %posttrans script [ 91s] chmod: cannot access `/etc/buxton2/*': No such file or directory [ 91s] /etc/buxton2/*: No such file or directory [ 91s] chmod: cannot access `/var/lib/buxton2/*': No such file or directory [ 91s] /var/lib/buxton2/*: No such file or directory [ 91s] [197/260] installing eina-1.16.0-38.30 [ 91s] [198/260] installing bundle-0.2.3-6.1 [ 91s] [199/260] installing vconf-compat-1.3.9-22.1 [ 92s] [200/260] installing glib2-devel-2.52.2-12.1 [ 92s] [201/260] installing rpm-build-4.11.0.1-5.39 [ 92s] [202/260] installing embryo-1.16.0-38.30 [ 92s] [203/260] installing ector-1.16.0-38.30 [ 93s] [204/260] installing ecore-core-1.16.0-38.30 [ 93s] [205/260] installing libslp-db-util-0.1.1-4.1 [ 93s] [206/260] installing emile-1.16.0-38.30 [ 93s] [207/260] installing bluetooth-frwk-0.2.158-14.1 [ 93s] [208/260] installing libstorage-1.0.0-15.1 [ 94s] [209/260] installing ecore-imf-1.16.0-38.30 [ 94s] [210/260] installing edbus-1.7.9-3.1 [ 94s] [211/260] installing eldbus-1.16.0-38.30 [ 94s] [212/260] installing capi-network-bluetooth-0.3.4-16.1 [ 95s] [213/260] installing eet-1.16.0-38.30 [ 95s] [214/260] installing ecore-audio-1.16.0-38.30 [ 95s] [215/260] installing pkgmgr-info-0.12.16-11.1 [ 96s] [216/260] installing ecore-con-1.16.0-38.30 [ 96s] [217/260] installing pkgmgr-installer-0.9.3-6.1 [ 96s] [218/260] installing pkgmgr-info-parser-0.12.16-11.1 [ 97s] [219/260] installing pkgmgr-client-0.9.3-6.1 [ 97s] [220/260] installing security-privilege-manager-0.0.5-21.17 [ 98s] mdm blacklist exist [ 98s] Check inserted data [ 98s] DPM blacklist... [ 98s] [ 98s] MDM blacklist... [ 98s] [221/260] installing eio-1.16.0-38.30 [ 98s] [222/260] installing ecore-file-1.16.0-38.30 [ 98s] [223/260] installing ecore-ipc-1.16.0-38.30 [ 98s] [224/260] installing capi-appfw-package-manager-0.5.5-7.1 [ 98s] [225/260] installing aul-0.9.4-43.21 [ 99s] [226/260] installing security-manager-1.3.6-19.2 [ 100s] Running in chroot, ignoring request. [ 100s] Database empty, creating from scratch. [ 100s] persist [ 100s] Running in chroot, ignoring request. [ 100s] Running in chroot, ignoring request. [ 100s] [227/260] installing security-manager-policy-1.3.6-19.2 [ 104s] [228/260] installing libsecurity-manager-client-1.3.6-19.2 [ 104s] [229/260] installing eeze-1.16.0-38.30 [ 105s] [230/260] installing efreet-1.16.0-38.30 [ 105s] [231/260] installing app-core-common-1.10.4-25.1 [ 105s] [232/260] installing ecore-input-1.16.0-38.30 [ 105s] [233/260] installing capi-appfw-app-common-0.6.1-8.1 [ 106s] [234/260] installing security-license-manager-1.3.6-19.2 [ 106s] Running in chroot, ignoring request. [ 106s] Running in chroot, ignoring request. [ 106s] [235/260] installing key-manager-0.1.26-11.2 [ 107s] Running in chroot, ignoring request. [ 107s] Running in chroot, ignoring request. [ 107s] [236/260] installing ecore-fb-1.16.0-38.30 [ 107s] [237/260] installing libkey-manager-client-0.1.26-11.2 [ 107s] [238/260] installing ecore-wayland-1.16.0-38.30 [ 107s] [239/260] installing ecore-drm-1.16.0-38.30 [ 107s] [240/260] installing app-core-ui-1.10.4-25.1 [ 108s] [241/260] installing cert-svc-2.2.1-5.1 [ 108s] Running in chroot, ignoring request. [ 108s] Running in chroot, ignoring request. [ 108s] [242/260] installing ecore-evas-1.16.0-38.30 [ 108s] [243/260] installing amd-1.3.26-70.1 [ 109s] Running in chroot, ignoring request. [ 109s] Running in chroot, ignoring request. [ 109s] [244/260] installing evas-1.16.0-38.30 [ 109s] [245/260] installing ecore-imf-evas-1.16.0-38.30 [ 109s] [246/260] installing ecore-input-evas-1.16.0-38.30 [ 109s] [247/260] installing amd-mod-share-1.3.26-70.1 [ 109s] [248/260] installing libcairo-1.14.2-6.1 [ 110s] [249/260] installing capi-appfw-app-control-0.7.6-12.1 [ 110s] [250/260] installing edje-1.16.0-38.30 [ 110s] [251/260] installing notification-0.3.54-25.1 [ 111s] [252/260] installing emotion-1.16.0-38.30 [ 111s] [253/260] installing ethumb-1.16.0-38.30 [ 111s] [254/260] installing elementary-1.16.0-37.14 [ 112s] [255/260] installing app-core-efl-1.10.4-25.1 [ 112s] [256/260] installing efl-extension-0.1.7-29.1 [ 113s] [257/260] installing capi-appfw-application-0.5.15-6.1 [ 113s] [258/260] installing isf-4.0.62-36.1 [ 113s] [259/260] installing isf-devel-4.0.62-36.1 [ 113s] [260/260] installing org.tizen.isf-kbd-mode-changer-4.0.62-36.1 [ 114s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 114s] now finalizing build dir... [ 114s] Running build time source services... [ 115s] build target is armv7l-tizen-linux [ 115s] ----------------------------------------------------------------- [ 115s] I have the following modifications for ise-engine-hangul.spec: [ 115s] 5c5 [ 115s] < Release: 1 [ 115s] --- [ 115s] > Release: 3.2 [ 115s] 49a50 [ 115s] > %changelog [ 115s] ----------------------------------------------------------------- [ 115s] ----- building ise-engine-hangul.spec (user abuild) [ 115s] ----------------------------------------------------------------- [ 115s] ----------------------------------------------------------------- [ 115s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:4.0:Unified/standard/808267c5ea65bafdeb5d888ae9386f70-ise-engine-hangul' -ba /home/abuild/rpmbuild/SOURCES/ise-engine-hangul.spec [ 115s] Building target platforms: armv7l-tizen-linux [ 115s] Building for target armv7l-tizen-linux [ 115s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.7NsfoW [ 115s] + umask 022 [ 115s] + cd /home/abuild/rpmbuild/BUILD [ 115s] + cd /home/abuild/rpmbuild/BUILD [ 115s] + rm -rf ise-engine-hangul-1.0.10 [ 115s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/ise-engine-hangul-1.0.10.tar.gz [ 115s] + /bin/tar -xf - [ 115s] + STATUS=0 [ 115s] + '[' 0 -ne 0 ']' [ 115s] + cd ise-engine-hangul-1.0.10 [ 115s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 115s] + exit 0 [ 115s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.Nol4bl [ 115s] + umask 022 [ 115s] + cd /home/abuild/rpmbuild/BUILD [ 115s] + cd ise-engine-hangul-1.0.10 [ 115s] ++ uname -m [ 115s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 115s] + LANG=C [ 115s] + export LANG [ 115s] + unset DISPLAY [ 115s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 115s] + export CFLAGS [ 115s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11' [ 115s] + export CXXFLAGS [ 115s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 115s] + export FFLAGS [ 115s] + LDFLAGS= [ 115s] + export LDFLAGS [ 115s] + export 'CFLAGS+= -fvisibility=hidden ' [ 115s] + CFLAGS+=' -fvisibility=hidden ' [ 115s] + export 'CXXFLAGS+= -fvisibility=hidden ' [ 115s] + CXXFLAGS+=' -fvisibility=hidden ' [ 115s] + export 'CPPFLAGS+= -DEXPORTED=__attribute__\(\(visibility\(\"default\"\)\)\)' [ 115s] + CPPFLAGS+=' -DEXPORTED=__attribute__\(\(visibility\(\"default\"\)\)\)' [ 115s] + ./bootstrap [ 115s] + touch ChangeLog [ 115s] + autopoint --force [ 120s] Copying file ABOUT-NLS [ 120s] Copying file config.rpath [ 120s] Creating directory m4 [ 120s] Copying file m4/codeset.m4 [ 120s] Copying file m4/fcntl-o.m4 [ 120s] Copying file m4/gettext.m4 [ 120s] Copying file m4/glibc2.m4 [ 120s] Copying file m4/glibc21.m4 [ 120s] Copying file m4/iconv.m4 [ 120s] Copying file m4/intdiv0.m4 [ 120s] Copying file m4/intl.m4 [ 120s] Copying file m4/intldir.m4 [ 120s] Copying file m4/intlmacosx.m4 [ 120s] Copying file m4/intmax.m4 [ 120s] Copying file m4/inttypes-pri.m4 [ 120s] Copying file m4/inttypes_h.m4 [ 120s] Copying file m4/lcmessage.m4 [ 120s] Copying file m4/lib-ld.m4 [ 120s] Copying file m4/lib-link.m4 [ 120s] Copying file m4/lib-prefix.m4 [ 120s] Copying file m4/lock.m4 [ 120s] Copying file m4/longlong.m4 [ 120s] Copying file m4/nls.m4 [ 120s] Copying file m4/po.m4 [ 120s] Copying file m4/printf-posix.m4 [ 120s] Copying file m4/progtest.m4 [ 120s] Copying file m4/size_max.m4 [ 120s] Copying file m4/stdint_h.m4 [ 120s] Copying file m4/threadlib.m4 [ 121s] Copying file m4/uintmax_t.m4 [ 121s] Copying file m4/visibility.m4 [ 121s] Copying file m4/wchar_t.m4 [ 121s] Copying file m4/wint_t.m4 [ 121s] Copying file m4/xsize.m4 [ 121s] Copying file po/Makefile.in.in [ 121s] Copying file po/Rules-quot [ 121s] + libtoolize --copy --automake [ 122s] + aclocal -I ./m4 [ 129s] + autoheader [ 131s] + automake --add-missing --copy --include-deps [ 134s] configure.ac:42: warning: The 'AM_PROG_MKDIR_P' macro is deprecated, and its use is discouraged. [ 134s] configure.ac:42: You should use the Autoconf-provided 'AC_PROG_MKDIR_P' macro instead, [ 134s] configure.ac:42: and use '$(MKDIR_P)' instead of '$(mkdir_p)'in your Makefile.am files. [ 134s] configure.ac:29: installing './compile' [ 135s] + autoconf [ 140s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fvisibility=hidden ' [ 140s] + export CFLAGS [ 140s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11 -fvisibility=hidden ' [ 140s] + export CXXFLAGS [ 140s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 140s] + export FFLAGS [ 140s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --disable-static [ 141s] checking for a BSD-compatible install... /usr/bin/install -c [ 141s] checking whether build environment is sane... yes [ 141s] /home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/missing: Unknown `--is-lightweight' option [ 141s] Try `/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/missing --help' for more information [ 141s] configure: WARNING: 'missing' script is too old or missing [ 141s] checking for a thread-safe mkdir -p... /usr/bin/mkdir -p [ 141s] checking for gawk... gawk [ 141s] checking whether make sets $(MAKE)... yes [ 141s] checking whether make supports nested variables... yes [ 141s] checking whether make supports nested variables... (cached) yes [ 141s] checking build system type... armv7l-tizen-linux-gnueabi [ 141s] checking host system type... armv7l-tizen-linux-gnueabi [ 141s] checking how to print strings... printf [ 141s] checking for style of include used by make... GNU [ 141s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 141s] checking whether the C compiler works... yes [ 141s] checking for C compiler default output file name... a.out [ 141s] checking for suffix of executables... [ 141s] checking whether we are cross compiling... no [ 141s] checking for suffix of object files... o [ 141s] checking whether we are using the GNU C compiler... yes [ 141s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 141s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 141s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 141s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 141s] checking for a sed that does not truncate output... /usr/bin/sed [ 141s] checking for grep that handles long lines and -e... /usr/bin/grep [ 141s] checking for egrep... /usr/bin/grep -E [ 141s] checking for fgrep... /usr/bin/grep -F [ 141s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 141s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 141s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 141s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 141s] checking whether ln -s works... yes [ 141s] checking the maximum length of command line arguments... 1572864 [ 141s] checking whether the shell understands some XSI constructs... yes [ 141s] checking whether the shell understands "+="... yes [ 141s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 141s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 141s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 141s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 141s] checking for objdump... objdump [ 141s] checking how to recognize dependent libraries... pass_all [ 141s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 141s] checking for dlltool... no [ 141s] checking how to associate runtime and link libraries... printf %s\n [ 141s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 141s] checking for ar... ar [ 141s] checking for archiver @FILE support... @ [ 141s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 141s] checking for strip... strip [ 141s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 141s] checking for ranlib... ranlib [ 142s] checking command to parse /usr/bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 142s] checking for sysroot... no [ 142s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 142s] checking for mt... no [ 142s] checking if : is a manifest tool... no [ 142s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 142s] checking for ANSI C header files... yes [ 142s] checking for sys/types.h... yes [ 142s] checking for sys/stat.h... yes [ 142s] checking for stdlib.h... yes [ 142s] checking for string.h... yes [ 142s] checking for memory.h... yes [ 142s] checking for strings.h... yes [ 142s] checking for inttypes.h... yes [ 142s] checking for stdint.h... yes [ 142s] checking for unistd.h... yes [ 142s] checking for dlfcn.h... yes [ 142s] checking for objdir... .libs [ 142s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 142s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 142s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 142s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 143s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 143s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 143s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 143s] checking whether -lc should be explicitly linked in... no [ 143s] checking dynamic linker characteristics... GNU/Linux ld.so [ 143s] checking how to hardcode library paths into programs... immediate [ 143s] checking for shl_load... no [ 143s] checking for shl_load in -ldld... no [ 143s] checking for dlopen... no [ 143s] checking for dlopen in -ldl... yes [ 143s] checking whether a program can dlopen itself... yes [ 143s] checking whether a statically linked program can dlopen itself... yes [ 143s] checking whether stripping libraries is possible... yes [ 143s] checking if libtool supports shared libraries... yes [ 143s] checking whether to build shared libraries... yes [ 143s] checking whether to build static libraries... no [ 143s] checking which extension is used for runtime loadable modules... .so [ 143s] checking which variable specifies run-time module search path... LD_LIBRARY_PATH [ 143s] checking for the default library search path... /lib /usr/lib /usr/local/lib /emul/lib [ 143s] checking for library containing dlopen... -ldl [ 143s] checking for dlerror... yes [ 143s] checking for shl_load... (cached) no [ 143s] checking for shl_load in -ldld... (cached) no [ 143s] checking for dld_link in -ldld... no [ 143s] checking for _ prefix in compiled symbols... no [ 143s] checking whether deplibs are loaded by dlopen... yes [ 143s] checking for argz.h... yes [ 144s] checking for error_t... yes [ 144s] checking for argz_add... yes [ 144s] checking for argz_append... yes [ 144s] checking for argz_count... yes [ 144s] checking for argz_create_sep... yes [ 144s] checking for argz_insert... yes [ 144s] checking for argz_next... yes [ 144s] checking for argz_stringify... yes [ 144s] checking if argz actually works... yes [ 144s] checking whether libtool supports -dlopen/-dlpreopen... yes [ 144s] checking for ltdl.h... yes [ 144s] checking whether lt_dlinterface_register is declared... yes [ 144s] checking for lt_dladvise_preload in -lltdl... yes [ 144s] checking where to find libltdl headers... [ 144s] checking where to find libltdl library... -lltdl [ 144s] checking for unistd.h... (cached) yes [ 144s] checking for dl.h... no [ 144s] checking for sys/dl.h... no [ 144s] checking for dld.h... no [ 145s] checking for mach-o/dyld.h... no [ 145s] checking for dirent.h... yes [ 145s] checking for closedir... yes [ 145s] checking for opendir... yes [ 145s] checking for readdir... yes [ 145s] checking for strlcat... no [ 145s] checking for strlcpy... no [ 145s] checking for armv7l-tizen-linux-gnueabi-g++... armv7l-tizen-linux-gnueabi-g++ [ 145s] checking whether we are using the GNU C++ compiler... yes [ 145s] checking whether armv7l-tizen-linux-gnueabi-g++ accepts -g... yes [ 145s] checking dependency style of armv7l-tizen-linux-gnueabi-g++... gcc3 [ 145s] checking how to run the C++ preprocessor... armv7l-tizen-linux-gnueabi-g++ -E [ 146s] checking for ld used by armv7l-tizen-linux-gnueabi-g++... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 146s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 146s] checking whether the armv7l-tizen-linux-gnueabi-g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 146s] checking for armv7l-tizen-linux-gnueabi-g++ option to produce PIC... -fPIC -DPIC [ 146s] checking if armv7l-tizen-linux-gnueabi-g++ PIC flag -fPIC -DPIC works... yes [ 146s] checking if armv7l-tizen-linux-gnueabi-g++ static flag -static works... no [ 146s] checking if armv7l-tizen-linux-gnueabi-g++ supports -c -o file.o... yes [ 146s] checking if armv7l-tizen-linux-gnueabi-g++ supports -c -o file.o... (cached) yes [ 146s] checking whether the armv7l-tizen-linux-gnueabi-g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 146s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 146s] checking how to hardcode library paths into programs... immediate [ 146s] checking for armv7l-tizen-linux-gnueabi-gcc... (cached) armv7l-tizen-linux-gnueabi-gcc [ 146s] checking whether we are using the GNU C compiler... (cached) yes [ 146s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... (cached) yes [ 146s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... (cached) none needed [ 146s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... (cached) yes [ 146s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... (cached) gcc3 [ 146s] checking for an ANSI C-conforming const... yes [ 146s] checking for size_t... yes [ 146s] checking whether NLS is requested... yes [ 146s] checking for msgfmt... /usr/bin/msgfmt [ 146s] checking for gmsgfmt... /usr/bin/msgfmt [ 146s] checking for xgettext... /usr/bin/xgettext [ 146s] checking for msgmerge... /usr/bin/msgmerge [ 146s] checking for ld used by GCC... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 146s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 146s] checking for shared library run path origin... done [ 146s] checking for CFPreferencesCopyAppValue... no [ 147s] checking for CFLocaleCopyCurrent... no [ 147s] checking for GNU gettext in libc... yes [ 147s] checking whether to use NLS... yes [ 147s] checking where the gettext function comes from... libc [ 147s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /usr/bin/armv7l-tizen-linux-gnueabi-pkg-config [ 147s] checking pkg-config is at least version 0.9.0... yes [ 147s] checking for LIBHANGUL... yes [ 147s] checking for SCIM... yes [ 147s] checking for SCIM_GTKUTILS... no [ 147s] checking for ANSI C header files... (cached) yes [ 147s] checking that generated files are newer than configure... done [ 147s] configure: creating ./config.status [ 148s] config.status: creating Makefile [ 148s] config.status: creating po/Makefile.in [ 148s] config.status: creating src/Makefile [ 148s] config.status: creating data/Makefile [ 148s] config.status: creating scim-hangul.spec [ 148s] config.status: creating config.h [ 148s] config.status: executing depfiles commands [ 148s] config.status: executing libtool commands [ 149s] config.status: executing po-directories commands [ 149s] config.status: creating po/POTFILES [ 149s] config.status: setting ALL_LINGUAS in configure.in is obsolete [ 149s] config.status: creating po/Makefile [ 149s] === configuring in libltdl (/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/libltdl) [ 149s] configure: running /bin/sh ./configure --disable-option-checking '--prefix=/usr' '--build=armv7l-tizen-linux-gnueabi' '--host=armv7l-tizen-linux-gnueabi' '--program-prefix=' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib' '--libexecdir=/usr/libexec' '--localstatedir=/var' '--sharedstatedir=/usr/com' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--disable-static' 'build_alias=armv7l-tizen-linux-gnueabi' 'host_alias=armv7l-tizen-linux-gnueabi' 'CFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fvisibility=hidden ' 'LDFLAGS=' 'CPPFLAGS= -DEXPORTED=__attribute__\(\(visibility\(\"default\"\)\)\)' 'CXXFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11 -fvisibility=hidden ' --cache-file=/dev/null --srcdir=. [ 149s] checking for a BSD-compatible install... /usr/bin/install -c [ 150s] checking whether build environment is sane... yes [ 150s] checking for a thread-safe mkdir -p... /usr/bin/mkdir -p [ 150s] checking for gawk... gawk [ 150s] checking whether make sets $(MAKE)... yes [ 150s] checking build system type... armv7l-tizen-linux-gnueabi [ 150s] checking host system type... armv7l-tizen-linux-gnueabi [ 150s] checking how to print strings... printf [ 150s] checking for style of include used by make... GNU [ 150s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 150s] checking whether the C compiler works... yes [ 150s] checking for C compiler default output file name... a.out [ 150s] checking for suffix of executables... [ 150s] checking whether we are cross compiling... no [ 150s] checking for suffix of object files... o [ 150s] checking whether we are using the GNU C compiler... yes [ 150s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 150s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 151s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 151s] checking for a sed that does not truncate output... /usr/bin/sed [ 151s] checking for grep that handles long lines and -e... /usr/bin/grep [ 151s] checking for egrep... /usr/bin/grep -E [ 151s] checking for fgrep... /usr/bin/grep -F [ 151s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 151s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 151s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 151s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 151s] checking whether ln -s works... yes [ 151s] checking the maximum length of command line arguments... 1572864 [ 151s] checking whether the shell understands some XSI constructs... yes [ 151s] checking whether the shell understands "+="... yes [ 151s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 151s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 151s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 151s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 151s] checking for objdump... objdump [ 151s] checking how to recognize dependent libraries... pass_all [ 151s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 151s] checking for dlltool... no [ 151s] checking how to associate runtime and link libraries... printf %s\n [ 151s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 151s] checking for ar... ar [ 151s] checking for archiver @FILE support... @ [ 151s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 151s] checking for strip... strip [ 151s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 151s] checking for ranlib... ranlib [ 151s] checking command to parse /usr/bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 151s] checking for sysroot... no [ 151s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 151s] checking for mt... no [ 151s] checking if : is a manifest tool... no [ 151s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 151s] checking for ANSI C header files... yes [ 151s] checking for sys/types.h... yes [ 151s] checking for sys/stat.h... yes [ 151s] checking for stdlib.h... yes [ 151s] checking for string.h... yes [ 151s] checking for memory.h... yes [ 151s] checking for strings.h... yes [ 151s] checking for inttypes.h... yes [ 151s] checking for stdint.h... yes [ 151s] checking for unistd.h... yes [ 151s] checking for dlfcn.h... yes [ 151s] checking for objdir... .libs [ 152s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 152s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 152s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 152s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 152s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 152s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 152s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 152s] checking whether -lc should be explicitly linked in... no [ 152s] checking dynamic linker characteristics... GNU/Linux ld.so [ 152s] checking how to hardcode library paths into programs... immediate [ 152s] checking for shl_load... no [ 152s] checking for shl_load in -ldld... no [ 152s] checking for dlopen... no [ 152s] checking for dlopen in -ldl... yes [ 152s] checking whether a program can dlopen itself... yes [ 152s] checking whether a statically linked program can dlopen itself... yes [ 152s] checking whether stripping libraries is possible... yes [ 152s] checking if libtool supports shared libraries... yes [ 152s] checking whether to build shared libraries... yes [ 152s] checking whether to build static libraries... no [ 152s] checking which extension is used for runtime loadable modules... .so [ 152s] checking which variable specifies run-time module search path... LD_LIBRARY_PATH [ 152s] checking for the default library search path... /lib /usr/lib /usr/local/lib /emul/lib [ 152s] checking for library containing dlopen... -ldl [ 153s] checking for dlerror... yes [ 153s] checking for shl_load... (cached) no [ 153s] checking for shl_load in -ldld... (cached) no [ 153s] checking for dld_link in -ldld... no [ 153s] checking for _ prefix in compiled symbols... no [ 153s] checking whether deplibs are loaded by dlopen... yes [ 153s] checking for argz.h... yes [ 153s] checking for error_t... yes [ 153s] checking for argz_add... yes [ 153s] checking for argz_append... yes [ 153s] checking for argz_count... yes [ 153s] checking for argz_create_sep... yes [ 153s] checking for argz_insert... yes [ 153s] checking for argz_next... yes [ 153s] checking for argz_stringify... yes [ 153s] checking if argz actually works... yes [ 153s] checking whether libtool supports -dlopen/-dlpreopen... yes [ 153s] checking for unistd.h... (cached) yes [ 153s] checking for dl.h... no [ 153s] checking for sys/dl.h... no [ 153s] checking for dld.h... no [ 153s] checking for mach-o/dyld.h... no [ 153s] checking for dirent.h... yes [ 154s] checking for closedir... yes [ 154s] checking for opendir... yes [ 154s] checking for readdir... yes [ 154s] checking for strlcat... no [ 154s] checking for strlcpy... no [ 154s] configure: creating ./config.status [ 154s] config.status: creating Makefile [ 154s] config.status: creating config.h [ 154s] config.status: executing depfiles commands [ 155s] config.status: executing libtool commands [ 155s] + make -j8 [ 155s] make all-recursive [ 155s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10' [ 155s] Making all in src [ 155s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/src' [ 155s] /bin/sh ../libtool --tag=CXX --mode=compile armv7l-tizen-linux-gnueabi-g++ -DHAVE_CONFIG_H -I. -I.. -DEXPORTED=__attribute__\(\(visibility\(\"default\"\)\)\) -I/usr/include/scim-1.0 -I/usr/include/hangul-1.0 -DSCIM_ICONDIR=\"/usr/share/scim/icons\" -DSCIM_HANGUL_LOCALEDIR=\"/usr/share/locale\" -DSCIM_HANGUL_DATADIR=\"/usr/share/scim/hangul\" -DSCIM_HANGUL_ICON_FILE=\"/usr/share/scim/icons/scim-hangul.png\" -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11 -fvisibility=hidden -MT hangul_la-scim_hangul_imengine.lo -MD -MP -MF .deps/hangul_la-scim_hangul_imengine.Tpo -c -o hangul_la-scim_hangul_imengine.lo `test -f 'scim_hangul_imengine.cpp' || echo './'`scim_hangul_imengine.cpp [ 155s] libtool: compile: armv7l-tizen-linux-gnueabi-g++ -DHAVE_CONFIG_H -I. -I.. "-DEXPORTED=__attribute__((visibility(\"default\")))" -I/usr/include/scim-1.0 -I/usr/include/hangul-1.0 -DSCIM_ICONDIR=\"/usr/share/scim/icons\" -DSCIM_HANGUL_LOCALEDIR=\"/usr/share/locale\" -DSCIM_HANGUL_DATADIR=\"/usr/share/scim/hangul\" -DSCIM_HANGUL_ICON_FILE=\"/usr/share/scim/icons/scim-hangul.png\" -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11 -fvisibility=hidden -MT hangul_la-scim_hangul_imengine.lo -MD -MP -MF .deps/hangul_la-scim_hangul_imengine.Tpo -c scim_hangul_imengine.cpp -fPIC -DPIC -o .libs/hangul_la-scim_hangul_imengine.o [ 157s] mv -f .deps/hangul_la-scim_hangul_imengine.Tpo .deps/hangul_la-scim_hangul_imengine.Plo [ 157s] /bin/sh ../libtool --tag=CXX --mode=link armv7l-tizen-linux-gnueabi-g++ -I/usr/include/scim-1.0 -I/usr/include/hangul-1.0 -DSCIM_ICONDIR=\"/usr/share/scim/icons\" -DSCIM_HANGUL_LOCALEDIR=\"/usr/share/locale\" -DSCIM_HANGUL_DATADIR=\"/usr/share/scim/hangul\" -DSCIM_HANGUL_ICON_FILE=\"/usr/share/scim/icons/scim-hangul.png\" -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11 -fvisibility=hidden -avoid-version -rpath /usr/lib/scim-1.0/1.4.0/IMEngine -module -export-symbols-regex "^[^_].*" -lscim-1.0 -lscim_imengine -lhangul -o hangul.la -rpath /usr/lib/scim-1.0/1.4.0/IMEngine hangul_la-scim_hangul_imengine.lo -ldl [ 157s] libtool: link: /usr/bin/nm -B .libs/hangul_la-scim_hangul_imengine.o | sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' | sed '/ __gnu_lto/d' | /usr/bin/sed 's/.* //' | sort | uniq > .libs/hangul.exp [ 157s] libtool: link: /usr/bin/grep -E -e "^[^_].*" ".libs/hangul.exp" > ".libs/hangul.expT" [ 157s] libtool: link: mv -f ".libs/hangul.expT" ".libs/hangul.exp" [ 158s] libtool: link: armv7l-tizen-linux-gnueabi-g++ -fPIC -DPIC -shared -nostdlib /lib/crti.o /usr/lib/gcc/armv7l-tizen-linux-gnueabi/6.2.1/crtbeginS.o .libs/hangul_la-scim_hangul_imengine.o -Wl,--as-needed -lscim-1.0 -lscim_imengine -lhangul -ldl -L/usr/lib/gcc/armv7l-tizen-linux-gnueabi/6.2.1 -L/usr/lib/gcc/armv7l-tizen-linux-gnueabi/6.2.1/../../../../armv7l-tizen-linux-gnueabi/lib -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/armv7l-tizen-linux-gnueabi/6.2.1/crtendS.o /lib/crtn.o -O2 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wl,-soname -Wl,hangul.so -Wl,-retain-symbols-file -Wl,.libs/hangul.exp -o .libs/hangul.so [ 158s] libtool: link: ( cd ".libs" && rm -f "hangul.la" && ln -s "../hangul.la" "hangul.la" ) [ 158s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/src' [ 158s] Making all in data [ 158s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/data' [ 158s] make[2]: Nothing to be done for 'all'. [ 158s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/data' [ 158s] Making all in po [ 158s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/po' [ 158s] test ! -f ./scim-hangul.pot || \ [ 158s] test -z "de.gmo fr.gmo ja.gmo ko.gmo nl.gmo pa.gmo zh_CN.gmo" || make de.gmo fr.gmo ja.gmo ko.gmo nl.gmo pa.gmo zh_CN.gmo [ 158s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/po' [ 158s] rm -f de.gmo && /usr/bin/msgfmt -c --statistics --verbose -o de.gmo de.po [ 158s] rm -f fr.gmo && /usr/bin/msgfmt -c --statistics --verbose -o fr.gmo fr.po [ 158s] rm -f ja.gmo && /usr/bin/msgfmt -c --statistics --verbose -o ja.gmo ja.po [ 158s] rm -f ko.gmo && /usr/bin/msgfmt -c --statistics --verbose -o ko.gmo ko.po [ 158s] rm -f nl.gmo && /usr/bin/msgfmt -c --statistics --verbose -o nl.gmo nl.po [ 158s] rm -f zh_CN.gmo && /usr/bin/msgfmt -c --statistics --verbose -o zh_CN.gmo zh_CN.po [ 158s] rm -f pa.gmo && /usr/bin/msgfmt -c --statistics --verbose -o pa.gmo pa.po [ 158s] fr.po: 9 translated messages, 6 fuzzy translations, 12 untranslated messagesde.po: . [ 158s] 9 translated messages, 6 fuzzy translations, 12 untranslated messages. [ 158s] ko.po: ja.po: 9 translated messages27 translated messages, 8 fuzzy translations. [ 158s] , 10 untranslated messages. [ 158s] zh_CN.po: 8 translated messages, 9 fuzzy translations, 10 untranslated messages. [ 158s] nl.po: 27 translated messages. [ 158s] pa.po: 9 translated messages, 6 fuzzy translations, 12 untranslated messages. [ 158s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/po' [ 158s] touch stamp-po [ 158s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/po' [ 158s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10' [ 158s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10' [ 158s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10' [ 158s] + exit 0 [ 158s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.ZdCUgt [ 158s] + umask 022 [ 158s] + cd /home/abuild/rpmbuild/BUILD [ 158s] + cd ise-engine-hangul-1.0.10 [ 158s] + LANG=C [ 158s] + export LANG [ 158s] + unset DISPLAY [ 158s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-3.2.arm [ 158s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-3.2.arm [ 158s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-3.2.arm [ 158s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-3.2.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-3.2.arm install [ 158s] Making install in src [ 158s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/src' [ 158s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/src' [ 158s] make[2]: Nothing to be done for 'install-exec-am'. [ 158s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-3.2.arm/usr/lib/scim-1.0/1.4.0/IMEngine' [ 158s] /bin/sh ../libtool --mode=install /usr/bin/install -c hangul.la '/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-3.2.arm/usr/lib/scim-1.0/1.4.0/IMEngine' [ 158s] libtool: install: /usr/bin/install -c .libs/hangul.so /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-3.2.arm/usr/lib/scim-1.0/1.4.0/IMEngine/hangul.so [ 158s] libtool: install: /usr/bin/install -c .libs/hangul.lai /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-3.2.arm/usr/lib/scim-1.0/1.4.0/IMEngine/hangul.la [ 158s] libtool: install: warning: remember to run `libtool --finish /usr/lib/scim-1.0/1.4.0/IMEngine' [ 158s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/src' [ 158s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/src' [ 158s] Making install in data [ 158s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/data' [ 158s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/data' [ 158s] make[2]: Nothing to be done for 'install-exec-am'. [ 158s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-3.2.arm/usr/share/scim/icons' [ 158s] /usr/bin/install -c -m 644 scim-hangul.png scim-hangul-on.png scim-hangul-off.png '/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-3.2.arm/usr/share/scim/icons' [ 158s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-3.2.arm/usr/share/scim/hangul' [ 158s] /usr/bin/install -c -m 644 symbol.txt '/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-3.2.arm/usr/share/scim/hangul' [ 158s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/data' [ 158s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/data' [ 158s] Making install in po [ 158s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/po' [ 158s] installing de.gmo as /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-3.2.arm/usr/share/locale/de/LC_MESSAGES/scim-hangul.mo [ 158s] installing fr.gmo as /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-3.2.arm/usr/share/locale/fr/LC_MESSAGES/scim-hangul.mo [ 158s] installing ja.gmo as /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-3.2.arm/usr/share/locale/ja/LC_MESSAGES/scim-hangul.mo [ 158s] installing ko.gmo as /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-3.2.arm/usr/share/locale/ko/LC_MESSAGES/scim-hangul.mo [ 158s] installing nl.gmo as /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-3.2.arm/usr/share/locale/nl/LC_MESSAGES/scim-hangul.mo [ 158s] installing pa.gmo as /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-3.2.arm/usr/share/locale/pa/LC_MESSAGES/scim-hangul.mo [ 158s] installing zh_CN.gmo as /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-3.2.arm/usr/share/locale/zh_CN/LC_MESSAGES/scim-hangul.mo [ 158s] if test "scim-hangul" = "gettext-tools"; then \ [ 158s] /usr/bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-3.2.arm/usr/share/gettext/po; \ [ 158s] for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ [ 158s] /usr/bin/install -c -m 644 ./$file \ [ 158s] /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-3.2.arm/usr/share/gettext/po/$file; \ [ 158s] done; \ [ 158s] for file in Makevars; do \ [ 158s] rm -f /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-3.2.arm/usr/share/gettext/po/$file; \ [ 158s] done; \ [ 158s] else \ [ 158s] : ; \ [ 158s] fi [ 158s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/po' [ 158s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10' [ 158s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10' [ 158s] make[2]: Nothing to be done for 'install-exec-am'. [ 158s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-3.2.arm/usr/share/packages' [ 158s] /usr/bin/install -c -m 644 hangul.xml '/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-3.2.arm/usr/share/packages' [ 158s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10' [ 158s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10' [ 158s] + rm -f /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-3.2.arm/usr/share/info/dir [ 158s] + find /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-3.2.arm -regex '.*\.la$' [ 158s] + xargs rm -f -- [ 158s] + find /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-3.2.arm -regex '.*\.a$' [ 158s] + xargs rm -f -- [ 158s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10 [ 158s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-3.2.arm/usr/lib/scim-1.0/1.4.0/IMEngine/hangul.so [ 159s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 159s] cpio: glibc-2.24/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 159s] cpio: glibc-2.24/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 159s] 59 blocks [ 159s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/ise-engine-hangul-debuginfo.manifest [ 159s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/ise-engine-hangul-debugsource.manifest [ 159s] + /usr/lib/rpm/check-buildroot [ 159s] + /usr/lib/rpm//brp-compress [ 159s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 159s] + /usr/lib/rpm/brp-python-hardlink [ 159s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-3.2.arm [ 160s] Processing files: ise-engine-hangul-1.0.10-3.2.armv7l [ 160s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 160s] cmVxdWVzdD4KPGFzc2lnbj4KICAgIDxmaWxlc3lzdGVtIHBhdGg9Ii91c3IvYmlu [ 160s] LyoiIGV4ZWNfbGFiZWw9Im5vbmUiIC8+CjwvYXNzaWduPgo8L21hbmlmZXN0Pgo= [ 160s] [ 160s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.FzUg7F [ 160s] + umask 022 [ 160s] + cd /home/abuild/rpmbuild/BUILD [ 160s] + cd ise-engine-hangul-1.0.10 [ 160s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-3.2.arm/usr/share/licenses/ise-engine-hangul [ 160s] + export LICENSEDIR [ 160s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-3.2.arm/usr/share/licenses/ise-engine-hangul [ 160s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-3.2.arm/usr/share/licenses/ise-engine-hangul [ 160s] + exit 0 [ 160s] Provides: hangul.so ise-engine-hangul = 1.0.10-3.2 ise-engine-hangul(armv7l-32) = 1.0.10-3.2 [ 160s] Requires(interp): /bin/sh /bin/sh [ 160s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 160s] Requires(post): /bin/sh [ 160s] Requires(postun): /bin/sh [ 160s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libhangul.so.1 libscim_imengine.so.8 libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(CXXABI_ARM_1.3.3) libstdc++.so.6(GLIBCXX_3.4) libstdc++.so.6(GLIBCXX_3.4.21) libstdc++.so.6(GLIBCXX_3.4.9) rtld(GNU_HASH) [ 160s] Processing files: ise-engine-hangul-debugsource-1.0.10-3.2.armv7l [ 160s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 160s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 160s] [ 160s] Provides: ise-engine-hangul-debugsource = 1.0.10-3.2 ise-engine-hangul-debugsource(armv7l-32) = 1.0.10-3.2 [ 160s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 160s] Processing files: ise-engine-hangul-debuginfo-1.0.10-3.2.armv7l [ 160s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 160s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 160s] [ 160s] Provides: ise-engine-hangul-debuginfo = 1.0.10-3.2 ise-engine-hangul-debuginfo(armv7l-32) = 1.0.10-3.2 [ 160s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 160s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-3.2.arm [ 160s] warning: Could not canonicalize hostname: obspw05 [ 160s] Wrote: /home/abuild/rpmbuild/SRPMS/ise-engine-hangul-1.0.10-3.2.src.rpm [ 160s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/ise-engine-hangul-1.0.10-3.2.armv7l.rpm [ 160s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/ise-engine-hangul-debugsource-1.0.10-3.2.armv7l.rpm [ 160s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/ise-engine-hangul-debuginfo-1.0.10-3.2.armv7l.rpm [ 160s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.E1p14K [ 160s] + umask 022 [ 160s] + cd /home/abuild/rpmbuild/BUILD [ 160s] + cd ise-engine-hangul-1.0.10 [ 160s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-3.2.arm [ 160s] + exit 0 [ 160s] ... checking for files with abuild user/group [ 160s] ... creating baselibs [ 161s] ... comparing built packages with the former built [ 161s] /usr/lib/build/pkg-diff.sh [ 161s] compare /.build.oldpackages/ise-engine-hangul-1.0.10-3.1.src.rpm /home/abuild/rpmbuild/SRPMS/ise-engine-hangul-1.0.10-3.2.src.rpm [ 161s] This is not a prerelease project. Compare the project name. [ 161s] comparing rpmtags [ 161s] comparing RELEASE [ 161s] comparing PROVIDES [ 161s] comparing scripts [ 161s] comparing filelist [ 161s] comparing file checksum [ 161s] RPM meta information is identical [ 161s] compare /.build.oldpackages/ise-engine-hangul-1.0.10-3.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/ise-engine-hangul-1.0.10-3.2.armv7l.rpm [ 161s] Comparing ise-engine-hangul-1.0.10-3.1.armv7l.rpm to ise-engine-hangul-1.0.10-3.2.armv7l.rpm [ 161s] This is not a prerelease project. Compare the project name. [ 161s] comparing rpmtags [ 161s] comparing RELEASE [ 161s] comparing PROVIDES [ 161s] --- /tmp/tmp.ODffp37050/tmp.EfNqY37068 2020-09-08 00:17:25.830413923 +0000 [ 161s] +++ /tmp/tmp.ODffp37050/tmp.UyQxP37070 2020-09-08 00:17:25.874412681 +0000 [ 161s] @@ -14,7 +14,7 @@ [ 161s] libgcc_s.so.1 16384 [ 161s] libgcc_s.so.1(GCC_3.5) 16384 [ 161s] libhangul.so.1 16384 [ 161s] -libscim-1.0.so.8 16384 [ 161s] +libscim_imengine.so.8 16384 [ 161s] libstdc++.so.6 16384 [ 161s] libstdc++.so.6(CXXABI_1.3) 16384 [ 161s] libstdc++.so.6(CXXABI_ARM_1.3.3) 16384 [ 161s] RPM meta information is different [ 161s] compare /.build.oldpackages/ise-engine-hangul-debuginfo-1.0.10-3.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/ise-engine-hangul-debuginfo-1.0.10-3.2.armv7l.rpm [ 161s] skipping -debuginfo package [ 161s] compare /.build.oldpackages/ise-engine-hangul-debugsource-1.0.10-3.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/ise-engine-hangul-debugsource-1.0.10-3.2.armv7l.rpm [ 162s] Comparing ise-engine-hangul-debugsource-1.0.10-3.1.armv7l.rpm to ise-engine-hangul-debugsource-1.0.10-3.2.armv7l.rpm [ 162s] This is not a prerelease project. Compare the project name. [ 162s] comparing rpmtags [ 162s] comparing RELEASE [ 162s] comparing PROVIDES [ 162s] comparing scripts [ 162s] comparing filelist [ 162s] comparing file checksum [ 162s] creating rename script [ 162s] RPM meta information is identical [ 162s] [ 162s] obspw05 finished "build ise-engine-hangul.spec" at Tue Sep 8 00:17:26 UTC 2020. [ 162s] Retried build at Wed Jan 20 07:24:25 2021 returned same result, skipped Retried build at Wed Jan 20 23:13:28 2021 returned same result, skipped Retried build at Tue May 4 06:12:21 2021 returned same result, skipped