[ 0s] Using BUILD_ROOT=/srv/build/root_3/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_3/root [ 0s] [ 0s] [ 0s] w12 started "build _service:gbs:dracut.spec" at Thu Feb 26 13:03:42 UTC 2015. [ 0s] [ 0s] Building dracut for project 'Tizen:3.0.2014.Q4:Common' repository 'emulator32-wayland' arch 'i586' srcmd5 '4eea46b54682ca00f8b3dbe75acf059f' [ 0s] [ 0s] processing specfile /srv/build/root_3/.build-srcdir/_service:gbs:dracut.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_3/.build-srcdir/_service:gbs:dracut.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/3/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_3/.build.rpmlist /srv/build/root_3/.build-srcdir/_service:gbs:dracut.spec build rpmlint-Factory ... [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/35] preinstalling libmagic-data... [ 1s] [2/35] preinstalling setup... [ 1s] [3/35] preinstalling filesystem... [ 1s] [4/35] preinstalling glibc... [ 1s] [5/35] preinstalling bash... [ 1s] [6/35] preinstalling diffutils... [ 1s] [7/35] preinstalling libattr... [ 1s] [8/35] preinstalling libbz2... [ 1s] [9/35] preinstalling libcap... [ 1s] [10/35] preinstalling libelf... [ 1s] [11/35] preinstalling libfreebl3... [ 1s] [12/35] preinstalling libgcc_s1... [ 1s] [13/35] preinstalling liblua... [ 1s] [14/35] preinstalling liblzma... [ 1s] [15/35] preinstalling libncurses... [ 1s] [16/35] preinstalling libpopt... [ 1s] [17/35] preinstalling libsmack... [ 1s] [18/35] preinstalling libsqlite... [ 1s] [19/35] preinstalling nspr... [ 1s] [20/35] preinstalling sed... [ 1s] [21/35] preinstalling tar... [ 1s] [22/35] preinstalling zlib... [ 1s] [23/35] preinstalling grep... [ 1s] [24/35] preinstalling libacl... [ 1s] [25/35] preinstalling libreadline... [ 2s] [26/35] preinstalling smack... [ 2s] [27/35] preinstalling bzip2... [ 2s] [28/35] preinstalling libmagic... [ 2s] [29/35] preinstalling libxml2... [ 2s] [30/35] preinstalling util-linux... [ 2s] [31/35] preinstalling coreutils... [ 2s] [32/35] preinstalling nss... [ 2s] [33/35] preinstalling libsoftokn3... [ 2s] [34/35] preinstalling rpm... [ 2s] [35/35] preinstalling rpm-security-plugin... [ 2s] [ 2s] [1/8] preinstalling libext2fs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling perl... [ 3s] [5/8] preinstalling grep... [ 3s] [6/8] preinstalling libblkid... [ 3s] [7/8] preinstalling libmount... [ 3s] [8/8] preinstalling util-linux... [ 3s] copying packages... [ 4s] reordering...cycle: gcc49-locale -> gcc49 [ 4s] breaking dependency gcc49 -> gcc49-locale [ 4s] cycle: coreutils -> pam [ 4s] breaking dependency pam -> coreutils [ 4s] cycle: nss -> libsoftokn3 [ 4s] breaking dependency nss -> libsoftokn3 [ 4s] done [ 4s] booting kvm ... [ 4s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 8192 -drive file=/srv/build/root_3/root,if=virtio,cache=none -drive file=/srv/build/root_3/root,if=ide,index=0,cache=none -drive file=/srv/build/root_3/swap,if=virtio,cache=none -smp 4 [ 6s] [ 0.000000] tsc: Fast TSC calibration failed [ 7s] doing fast boot [ 7s] Creating device nodes with udev [ 10s] Waiting for device /dev/vda to appear: ok [ 10s] fsck from util-linux 2.21.2 [ 10s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 12s] /dev/vda: clean, 4486/2392064 files, 194084/9568256 blocks [ 12s] fsck succeeded. Mounting root device read-write. [ 12s] Mounting root /dev/vda [ 12s] mount -o rw -t ext4 /dev/vda /root [ 21s] replacing /etc/mtab with symlink to /proc/self/mounts [ 21s] 2nd stage started in virtual machine [ 21s] machine type: x86_64 [ 21s] switching personality to 8... [ 21s] 2nd stage started in virtual machine [ 21s] machine type: i686 [ 21s] swapon /dev/vdb [ 21s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 21s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 21s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 21s] mount: none is already mounted or /proc busy [ 21s] mount: none is already mounted or /dev/pts busy [ 21s] logging output to //.build.log... [ 21s] processing specfile /.build-srcdir/_service:gbs:dracut.spec ... [ 21s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:dracut.spec build rpmlint-Factory ... [ 21s] running setup postinstall script [ 21s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 21s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 21s] initializing rpm db... [ 21s] [1/126] installing libmagic-data-5.18-7.1 [ 22s] [2/126] installing libstdc++-locale-4.9.2-8.8 [ 22s] [3/126] installing setup-0.9-9.2 [ 22s] [4/126] installing terminfo-base-5.9-5.2 [ 22s] [5/126] installing filesystem-3.1-10.1 [ 28s] error: Failed to set SMACK64 _ for /proc: Operation not supported [ 29s] [6/126] installing glibc-2.20-6.6 [ 30s] [7/126] installing bash-4.3.30-14.2 [ 31s] [8/126] installing cpio-2.11-6.1 [ 31s] [9/126] installing diffutils-3.3-6.1 [ 31s] [10/126] installing findutils-4.5.14-6.1 [ 31s] [11/126] installing gawk-4.1.1-7.2 [ 32s] [12/126] installing hostname-3.12-5.1 [ 32s] [13/126] installing libatomic-4.9.2-8.8 [ 33s] [14/126] installing libattr-2.4.47-7.1 [ 34s] [15/126] installing libbz2-1.0.6-6.6 [ 35s] [16/126] installing libcap-2.24-6.5 [ 35s] [17/126] installing libcares-1.10.0-7.1 [ 36s] [18/126] installing libelf-0.160-6.4 [ 37s] [19/126] installing libexpat-2.1.0-5.1 [ 37s] [20/126] installing libext2fs-1.42.11-9.1 [ 38s] [21/126] installing libfreebl3-3.17.1-10.10 [ 38s] [22/126] installing libgcc_s1-4.9.2-8.8 [ 38s] [23/126] installing libgdbm-1.11-8.1 [ 38s] [24/126] installing libgmp-6.0.0-6.2 [ 39s] [25/126] installing libgomp-4.9.2-8.8 [ 39s] [26/126] installing libgpg-error-1.13-6.3 [ 39s] [27/126] installing libitm-4.9.2-8.8 [ 40s] [28/126] installing libltdl-2.4.2-5.1 [ 40s] [29/126] installing liblua-5.1.4-8.1 [ 40s] [30/126] installing liblzma-5.1.3-7.1 [ 41s] [31/126] installing libpcre-8.31-5.1 [ 41s] [32/126] installing libpopt-1.16-5.1 [ 42s] [33/126] installing libpython-2.7.8-7.3 [ 42s] [34/126] installing libsmack-1.0.5-10.1 [ 43s] [35/126] installing libsqlite-3.7.14-10.1 [ 43s] [36/126] installing libuuid-2.24.2-8.3 [ 43s] [37/126] installing m4-1.4.17-6.1 [ 44s] [38/126] installing net-tools-2.0_20121208git-5.1 [ 44s] [39/126] installing nspr-4.10.7-7.2 [ 45s] [40/126] installing patch-2.7-5.1 [ 46s] [41/126] installing pkg-config-0.28-5.1 [ 47s] [42/126] installing sed-4.2.2-7.1 [ 47s] [43/126] installing tar-1.27-6.1 [ 48s] [44/126] installing update-alternatives-1.16.3-7.1 [ 49s] [45/126] installing which-2.20-6.1 [ 50s] [46/126] installing zlib-1.2.8-6.1 [ 50s] [47/126] installing libncurses-5.9-5.2 [ 51s] [48/126] installing build-compare-2014.11.25-7.3 [ 51s] [49/126] installing gcc49-info-4.9.2-8.8 [ 53s] [50/126] installing dash-0.5.7-6.1 [ 54s] [51/126] installing less-466-7.1 [ 54s] [52/126] installing libacl-2.2.52-7.1 [ 54s] [53/126] installing libasm-0.160-6.4 [ 54s] [54/126] installing libblkid-2.24.2-8.3 [ 56s] [55/126] installing libgcrypt-1.6.2-6.3 [ 56s] [56/126] installing libidn-1.25-5.1 [ 56s] [57/126] installing libmpfr-3.1.2-6.1 [ 57s] [58/126] installing libopenssl-1.0.1j-8.1 [ 57s] [59/126] installing libreadline-5.2-5.3 [ 57s] [60/126] installing make-4.0-7.1 [ 57s] [61/126] installing nss-certs-3.17.1-10.10 [ 57s] [62/126] installing smack-1.0.5-10.1 [ 57s] [63/126] installing bzip2-1.0.6-6.6 [ 57s] [64/126] installing grep-2.19-6.1 [ 58s] [65/126] installing libmagic-5.18-7.1 [ 58s] [66/126] installing libstdc++-4.9.2-8.8 [ 58s] [67/126] installing libxml2-2.8.0-7.1 [ 58s] [68/126] installing xz-5.1.3-7.1 [ 58s] [69/126] installing binutils-2.25-11.2 [ 63s] update-alternatives: using /usr/bin/ld.bfd to provide /usr/bin/ld (ld) in auto mode. [ 63s] [70/126] installing libdw-0.160-6.4 [ 63s] [71/126] installing file-5.18-7.1 [ 64s] [72/126] installing db4-4.8.30.NC-6.1 [ 64s] [73/126] installing libasan-4.9.2-8.8 [ 65s] [74/126] installing libcilkrts-4.9.2-8.8 [ 67s] [75/126] installing libmount-2.24.2-8.3 [ 69s] [76/126] installing libmpc-1.0-6.1 [ 70s] [77/126] installing libubsan-4.9.2-8.8 [ 71s] [78/126] installing libxml2-tools-2.8.0-7.1 [ 71s] [79/126] installing rsync-3.1.1-6.1 [ 71s] [80/126] installing libcurl-7.37.1-7.1 [ 71s] [81/126] installing libxslt-1.1.28-6.1 [ 72s] [82/126] installing elfutils-0.160-6.4 [ 72s] [83/126] installing libxslt-tools-1.1.28-6.1 [ 73s] [84/126] installing cpp49-4.9.2-8.8 [ 75s] [85/126] installing perl-5.20.0-6.5 [ 139s] [86/126] installing python-2.7.8-7.3 [ 142s] [87/126] installing build-mkbaselibs-20120927-7.1 [ 143s] [88/126] installing perl-Error-0.17017-5.3 [ 144s] [89/126] installing cpp-4.9-8.1 [ 144s] [90/126] installing autoconf-2.69-6.1 [ 145s] [91/126] installing python-xml-2.7.8-7.3 [ 146s] [92/126] installing build-20120927-7.1 [ 147s] [93/126] installing pam-1.1.6-8.1 [ 148s] [94/126] installing nss-3.17.1-10.10 [ 149s] [95/126] installing pam-modules-extra-1.1.6-8.1 [ 150s] [96/126] installing libsoftokn3-3.17.1-10.10 [ 150s] [97/126] installing pwdutils-3.2.19-7.1 [ 151s] [98/126] installing coreutils-8.21-8.1 [ 153s] [99/126] installing util-linux-2.24.2-8.3 [ 155s] [100/126] installing rpm-4.11.0.1-26.1 [ 167s] [101/126] installing linux-glibc-devel-3.10-6.1 [ 170s] [102/126] installing glibc-locale-2.20-6.6 [ 175s] [103/126] installing gzip-1.6-5.1 [ 175s] [104/126] installing automake-1.14.1-7.1 [ 176s] [105/126] installing sgml-skel-0.6-5.1 [ 176s] [106/126] installing tzdata-2014h-7.1 [ 177s] [107/126] installing openssh-6.6p1-7.1 [ 177s] [108/126] installing rpmlint-mini-1.5-10.2 [ 178s] [109/126] installing rpm-security-plugin-4.11.0.1-26.1 [ 178s] warning: /etc/device-sec-policy created as /etc/device-sec-policy.rpmnew [ 178s] [110/126] installing rpmlint-tizen-1.0-5.1 [ 178s] [111/126] installing glibc-devel-2.20-6.6 [ 180s] [112/126] installing iso_ent-2000.11.03-6.1 [ 180s] [113/126] installing libtool-2.4.2-5.1 [ 181s] [114/126] installing xmlcharent-0.3-5.1 [ 181s] [115/126] installing git-core-2.0.1-8.2 [ 183s] [116/126] installing git-2.0.1-8.2 [ 183s] [117/126] installing libstdc++49-devel-4.9.2-8.8 [ 186s] [118/126] installing docbook_4-4.5-6.1 [ 188s] [119/126] installing gcc49-4.9.2-8.8 [ 191s] [120/126] installing gcc49-locale-4.9.2-8.8 [ 192s] [121/126] installing gcc-4.9-8.1 [ 192s] [122/126] installing docbook-xsl-stylesheets-1.78.1-7.3 [ 195s] [123/126] installing gcc49-c++-4.9.2-8.8 [ 197s] [124/126] installing gcc-c++-4.9-8.1 [ 197s] [125/126] installing asciidoc-8.6.6-6.1 [ 198s] [126/126] installing rpm-build-4.11.0.1-26.1 [ 198s] removing nis flags from //etc/nsswitch.conf... [ 198s] now finalizing build dir... [ 206s] build target is i686-tizen-linux [ 206s] ----------------------------------------------------------------- [ 206s] I have the following modifications for dracut.spec: [ 206s] 9c9 [ 206s] < Release: 0 [ 206s] --- [ 206s] > Release: 10.7 [ 206s] 252a253 [ 206s] > %changelog [ 206s] ----------------------------------------------------------------- [ 206s] ----- building dracut.spec (user abuild) [ 206s] ----------------------------------------------------------------- [ 206s] ----------------------------------------------------------------- [ 206s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=i686-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0.2014.Q4:Common/emulator32-wayland/4eea46b54682ca00f8b3dbe75acf059f-dracut' /home/abuild/rpmbuild/SOURCES/dracut.spec [ 206s] Building target platforms: i686-tizen-linux [ 206s] Building for target i686-tizen-linux [ 206s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.Jb34ET [ 206s] + umask 022 [ 206s] + cd /home/abuild/rpmbuild/BUILD [ 206s] + cd /home/abuild/rpmbuild/BUILD [ 206s] + rm -rf dracut-032 [ 206s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/dracut-032.tar.xz [ 206s] + /bin/tar -xf - [ 206s] + STATUS=0 [ 206s] + '[' 0 -ne 0 ']' [ 206s] + cd dracut-032 [ 206s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 206s] + cp /home/abuild/rpmbuild/SOURCES/dracut.manifest . [ 206s] + exit 0 [ 206s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.Bo9Mub [ 206s] + umask 022 [ 206s] + cd /home/abuild/rpmbuild/BUILD [ 206s] + cd dracut-032 [ 206s] ++ uname -m [ 206s] + [[ i686 == \a\a\r\c\h\6\4 ]] [ 206s] + LANG=C [ 206s] + export LANG [ 206s] + unset DISPLAY [ 206s] + CFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 206s] + export CFLAGS [ 206s] + CXXFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 206s] + export CXXFLAGS [ 206s] + FFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I%_fmoddir' [ 206s] + export FFLAGS [ 206s] + LD_AS_NEEDED=1 [ 206s] + export LD_AS_NEEDED [ 206s] + make all [ 207s] cc -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/dracut-install.o install/dracut-install.c [ 207s] install/dracut-install.c: In function 'resolve_deps': [ 207s] install/dracut-install.c:338:17: warning: ignoring return value of 'read', declared with attribute warn_unused_result [-Wunused-result] [ 207s] read(fd, buf, LINE_MAX); [ 207s] ^ [ 207s] install/dracut-install.c: In function 'cp': [ 207s] install/dracut-install.c:223:33: warning: ignoring return value of 'fchown', declared with attribute warn_unused_result [-Wunused-result] [ 207s] fchown(dest_desc, (__uid_t)-1, sb.st_gid); [ 207s] ^ [ 207s] cc -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/hashmap.o install/hashmap.c [ 208s] cc -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/log.o install/log.c [ 208s] cc -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/util.o install/util.c [ 208s] cc install/dracut-install.o install/hashmap.o install/log.o install/util.o -o install/dracut-install [ 208s] ln -fs install/dracut-install dracut-install [ 208s] asciidoc -d manpage -b docbook -o lsinitrd.1.xml lsinitrd.1.asc [ 208s] xsltproc -o lsinitrd.1 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl lsinitrd.1.xml [ 210s] Note: Writing lsinitrd.1 [ 210s] asciidoc -d manpage -b docbook -o dracut.conf.5.xml dracut.conf.5.asc [ 210s] xsltproc -o dracut.conf.5 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.conf.5.xml [ 210s] Note: Writing dracut.conf.5 [ 210s] asciidoc -d manpage -b docbook -o dracut.cmdline.7.xml dracut.cmdline.7.asc [ 211s] xsltproc -o dracut.cmdline.7 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.cmdline.7.xml [ 211s] Note: Writing dracut.cmdline.7 [ 211s] asciidoc -d manpage -b docbook -o dracut.bootup.7.xml dracut.bootup.7.asc [ 212s] xsltproc -o dracut.bootup.7 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.bootup.7.xml [ 212s] Note: Writing dracut.bootup.7 [ 212s] asciidoc -d manpage -b docbook -o dracut.8.xml dracut.8.asc [ 213s] xsltproc -o dracut.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.8.xml [ 213s] Note: Writing dracut.8 [ 213s] asciidoc -d manpage -b docbook -o dracut-catimages.8.xml dracut-catimages.8.asc [ 214s] xsltproc -o dracut-catimages.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut-catimages.8.xml [ 214s] Note: Writing dracut-catimages.8 [ 214s] asciidoc -d manpage -b docbook -o mkinitrd.8.xml mkinitrd.8.asc [ 214s] xsltproc -o mkinitrd.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl mkinitrd.8.xml [ 215s] Note: Writing mkinitrd.8 [ 215s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-cmdline.service.8.xml modules.d/98systemd/dracut-cmdline.service.8.asc [ 215s] xsltproc -o modules.d/98systemd/dracut-cmdline.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-cmdline.service.8.xml [ 215s] Note: Writing dracut-cmdline.service.8 [ 215s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-initqueue.service.8.xml modules.d/98systemd/dracut-initqueue.service.8.asc [ 215s] xsltproc -o modules.d/98systemd/dracut-initqueue.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-initqueue.service.8.xml [ 216s] Note: Writing dracut-initqueue.service.8 [ 216s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-mount.service.8.xml modules.d/98systemd/dracut-mount.service.8.asc [ 216s] xsltproc -o modules.d/98systemd/dracut-mount.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-mount.service.8.xml [ 216s] Note: Writing dracut-mount.service.8 [ 216s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-shutdown.service.8.xml modules.d/98systemd/dracut-shutdown.service.8.asc [ 217s] xsltproc -o modules.d/98systemd/dracut-shutdown.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-shutdown.service.8.xml [ 217s] Note: Writing dracut-shutdown.service.8 [ 217s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-mount.service.8.xml modules.d/98systemd/dracut-pre-mount.service.8.asc [ 217s] xsltproc -o modules.d/98systemd/dracut-pre-mount.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-mount.service.8.xml [ 218s] Note: Writing dracut-pre-mount.service.8 [ 218s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-pivot.service.8.xml modules.d/98systemd/dracut-pre-pivot.service.8.asc [ 218s] xsltproc -o modules.d/98systemd/dracut-pre-pivot.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-pivot.service.8.xml [ 218s] Note: Writing dracut-pre-pivot.service.8 [ 218s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-trigger.service.8.xml modules.d/98systemd/dracut-pre-trigger.service.8.asc [ 218s] xsltproc -o modules.d/98systemd/dracut-pre-trigger.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-trigger.service.8.xml [ 219s] Note: Writing dracut-pre-trigger.service.8 [ 219s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-udev.service.8.xml modules.d/98systemd/dracut-pre-udev.service.8.asc [ 219s] xsltproc -o modules.d/98systemd/dracut-pre-udev.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-udev.service.8.xml [ 219s] Note: Writing dracut-pre-udev.service.8 [ 219s] asciidoc -a numbered -d book -b docbook -o dracut.xml dracut.asc [ 223s] xsltproc -o dracut.html --xinclude -nonet \ [ 223s] --stringparam html.stylesheet \ [ 223s] http://docs.fedoraproject.org/en-US/Common_Content/css/default.css \ [ 223s] http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl dracut.xml [ 224s] rm -f -- dracut.xml [ 224s] rm modules.d/98systemd/dracut-mount.service.8.xml dracut.8.xml dracut.cmdline.7.xml modules.d/98systemd/dracut-pre-mount.service.8.xml dracut.bootup.7.xml modules.d/98systemd/dracut-initqueue.service.8.xml modules.d/98systemd/dracut-pre-pivot.service.8.xml mkinitrd.8.xml modules.d/98systemd/dracut-cmdline.service.8.xml dracut.conf.5.xml lsinitrd.1.xml modules.d/98systemd/dracut-pre-udev.service.8.xml dracut-catimages.8.xml modules.d/98systemd/dracut-pre-trigger.service.8.xml modules.d/98systemd/dracut-shutdown.service.8.xml [ 224s] + exit 0 [ 224s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.pF3Ssy [ 224s] + umask 022 [ 224s] + cd /home/abuild/rpmbuild/BUILD [ 224s] + cd dracut-032 [ 224s] + LANG=C [ 224s] + export LANG [ 224s] + unset DISPLAY [ 224s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386 [ 224s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386 [ 224s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386 libdir=/usr/lib bindir=/usr/bin systemdsystemunitdir=/usr/lib/systemd/system sysconfdir=/etc mandir=/usr/share/man [ 224s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/lib/dracut [ 224s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/bin [ 224s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/etc [ 224s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/lib/dracut/modules.d [ 224s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/share/man/man1 /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/share/man/man5 /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/share/man/man7 /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/share/man/man8 [ 224s] install -m 0755 dracut.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/bin/dracut [ 224s] install -m 0755 dracut-catimages.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/bin/dracut-catimages [ 224s] install -m 0755 mkinitrd-dracut.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/bin/mkinitrd [ 224s] install -m 0755 lsinitrd.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/bin/lsinitrd [ 224s] install -m 0644 dracut.conf /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/etc/dracut.conf [ 224s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/etc/dracut.conf.d [ 224s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/lib/dracut/dracut.conf.d [ 224s] install -m 0755 dracut-functions.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/lib/dracut/dracut-functions.sh [ 224s] install -m 0755 dracut-version.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/lib/dracut/dracut-version.sh [ 224s] ln -fs dracut-functions.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/lib/dracut/dracut-functions [ 224s] install -m 0755 dracut-logger.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/lib/dracut/dracut-logger.sh [ 224s] install -m 0755 dracut-initramfs-restore.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/lib/dracut/dracut-initramfs-restore [ 224s] cp -arx modules.d /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/lib/dracut [ 224s] for i in lsinitrd.1; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/share/man/man1/${i##*/}; done [ 224s] for i in dracut.conf.5; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/share/man/man5/${i##*/}; done [ 224s] for i in dracut.cmdline.7 dracut.bootup.7; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/share/man/man7/${i##*/}; done [ 224s] for i in dracut.8 dracut-catimages.8 mkinitrd.8 modules.d/98systemd/dracut-cmdline.service.8 modules.d/98systemd/dracut-initqueue.service.8 modules.d/98systemd/dracut-mount.service.8 modules.d/98systemd/dracut-shutdown.service.8 modules.d/98systemd/dracut-pre-mount.service.8 modules.d/98systemd/dracut-pre-pivot.service.8 modules.d/98systemd/dracut-pre-trigger.service.8 modules.d/98systemd/dracut-pre-udev.service.8; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/share/man/man8/${i##*/}; done [ 224s] ln -fs dracut.cmdline.7 /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/share/man/man7/dracut.kernel.7 [ 224s] if [ -n "/usr/lib/systemd/system" ]; then \ [ 224s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/lib/systemd/system; \ [ 224s] ln -srf /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/lib/dracut/modules.d/98systemd/dracut-shutdown.service /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/lib/systemd/system/dracut-shutdown.service; \ [ 224s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/lib/systemd/system/shutdown.target.wants; \ [ 224s] ln -s ../dracut-shutdown.service \ [ 224s] /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/lib/systemd/system/shutdown.target.wants/dracut-shutdown.service; \ [ 224s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/lib/systemd/system/initrd.target.wants; \ [ 224s] for i in \ [ 224s] dracut-cmdline.service \ [ 224s] dracut-initqueue.service \ [ 224s] dracut-mount.service \ [ 224s] dracut-pre-mount.service \ [ 224s] dracut-pre-pivot.service \ [ 224s] dracut-pre-trigger.service \ [ 224s] dracut-pre-udev.service \ [ 224s] ; do \ [ 224s] ln -srf /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/lib/dracut/modules.d/98systemd/$i /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/lib/systemd/system; \ [ 224s] ln -s ../$i \ [ 224s] /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/lib/systemd/system/initrd.target.wants/$i; \ [ 224s] done \ [ 224s] fi [ 224s] if [ -f install/dracut-install ]; then \ [ 224s] install -m 0755 install/dracut-install /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/lib/dracut/dracut-install; \ [ 224s] fi [ 224s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/lib/kernel/install.d [ 224s] install -m 0755 50-dracut.install /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/lib/kernel/install.d/50-dracut.install [ 224s] install -m 0755 51-dracut-rescue.install /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/lib/kernel/install.d/51-dracut-rescue.install [ 224s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/share/bash-completion/completions [ 224s] install -m 0644 dracut-bash-completion.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/share/bash-completion/completions/dracut [ 224s] install -m 0644 lsinitrd-bash-completion.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/share/bash-completion/completions/lsinitrd [ 224s] + echo DRACUT_VERSION=032-10.7 [ 224s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386//usr/lib/dracut/modules.d/01fips [ 224s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386//usr/lib/dracut/modules.d/02fips-aesni [ 224s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386//usr/lib/dracut/modules.d/50gensplash [ 224s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386//usr/lib/dracut/modules.d/96securityfs [ 224s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386//usr/lib/dracut/modules.d/97masterkey [ 224s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386//usr/lib/dracut/modules.d/98integrity [ 224s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386//usr/lib/dracut/modules.d/98selinux [ 224s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/boot/dracut [ 224s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/var/lib/dracut/overlay [ 224s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/var/log [ 224s] + touch /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/var/log/dracut.log [ 224s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/com/initramfs [ 224s] + install -m 0644 dracut.conf.d/suse.conf.example /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/etc/dracut.conf.d/01-dist.conf [ 224s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/etc/logrotate.d [ 224s] + install -m 0644 dracut.logrotate /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/etc/logrotate.d/dracut_log [ 224s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/dracut-032 [ 224s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/lib/dracut/dracut-install [ 224s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 224s] cpio: glibc-2.20/csu/elf-init.c: Cannot stat: No such file or directory [ 224s] cpio: glibc-2.20/csu/init.c: Cannot stat: No such file or directory [ 224s] cpio: glibc-2.20/sysdeps/i386/crti.S: Cannot stat: No such file or directory [ 224s] cpio: glibc-2.20/sysdeps/i386/crtn.S: Cannot stat: No such file or directory [ 224s] cpio: glibc-2.20/sysdeps/i386/start.S: Cannot stat: No such file or directory [ 224s] 195 blocks [ 224s] + /usr/lib/rpm/brp-compress [ 224s] + /usr/lib/rpm/brp-tizen [ 224s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386 [ 225s] Processing files: dracut-032-10.7.i686 [ 225s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 225s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 225s] [ 225s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.LbX45X [ 225s] + umask 022 [ 225s] + cd /home/abuild/rpmbuild/BUILD [ 225s] + cd dracut-032 [ 225s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/share/licenses/dracut [ 225s] + export LICENSEDIR [ 225s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/share/licenses/dracut [ 225s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386/usr/share/licenses/dracut [ 225s] + exit 0 [ 225s] Provides: config(dracut) = 032-10.7 dracut = 032-10.7 dracut(x86-32) = 032-10.7 [ 225s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 225s] Requires: /bin/bash /bin/sh libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.2) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libc.so.6(GLIBC_2.8) libgcc_s.so.1 libgcc_s.so.1(GCC_3.0) libgcc_s.so.1(GCC_3.3.1) [ 225s] Conflicts: systemd < 187 [ 225s] Processing files: dracut-debugsource-032-10.7.i686 [ 225s] Provides: dracut-debugsource = 032-10.7 dracut-debugsource(x86-32) = 032-10.7 [ 225s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 225s] Processing files: dracut-network-032-10.7.i686 [ 225s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 225s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 225s] [ 225s] Provides: dracut-network = 032-10.7 dracut-network(x86-32) = 032-10.7 [ 225s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 225s] Requires: /bin/bash /bin/sh [ 225s] Processing files: dracut-caps-032-10.7.i686 [ 225s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 225s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 225s] [ 225s] Provides: dracut-caps = 032-10.7 dracut-caps(x86-32) = 032-10.7 [ 225s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 225s] Requires: /bin/bash [ 225s] Processing files: dracut-tools-032-10.7.i686 [ 225s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 225s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 225s] [ 225s] Provides: dracut-tools = 032-10.7 dracut-tools(x86-32) = 032-10.7 [ 225s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 225s] Requires: /bin/bash [ 225s] Processing files: dracut-debuginfo-032-10.7.i686 [ 225s] Provides: debuginfo(build-id) = 6e3f89cc5cbede5be52a271d9a833f5713abbead [ 225s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 225s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386 [ 226s] Wrote: /home/abuild/rpmbuild/SRPMS/dracut-032-10.7.src.rpm [ 226s] Wrote: /home/abuild/rpmbuild/RPMS/i686/dracut-032-10.7.i686.rpm [ 226s] Wrote: /home/abuild/rpmbuild/RPMS/i686/dracut-debugsource-032-10.7.i686.rpm [ 226s] Wrote: /home/abuild/rpmbuild/RPMS/i686/dracut-network-032-10.7.i686.rpm [ 226s] Wrote: /home/abuild/rpmbuild/RPMS/i686/dracut-caps-032-10.7.i686.rpm [ 226s] Wrote: /home/abuild/rpmbuild/RPMS/i686/dracut-tools-032-10.7.i686.rpm [ 227s] Wrote: /home/abuild/rpmbuild/RPMS/i686/dracut-debuginfo-032-10.7.i686.rpm [ 227s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.DE3bjc [ 227s] + umask 022 [ 227s] + cd /home/abuild/rpmbuild/BUILD [ 227s] + cd dracut-032 [ 227s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.7.i386 [ 227s] + exit 0 [ 227s] ... checking for files with abuild user/group [ 227s] [ 227s] RPMLINT report: [ 227s] =============== [ 228s] dracut.i686: W: tizen-filelist-forbidden-fhs23 /usr/com is not allowed in FHS 2.3 [ 228s] see http://www.pathname.com/fhs/ to find a better location [ 228s] [ 228s] dracut.i686: W: script-without-shebang /usr/lib/dracut/dracut-version.sh [ 228s] This text file has executable bits set or is located in a path dedicated for [ 228s] executables, but lacks a shebang and cannot thus be executed. If the file is [ 228s] meant to be an executable script, add the shebang, otherwise remove the [ 228s] executable bits or move the file elsewhere. [ 228s] [ 228s] dracut-network.i686: W: non-executable-script /usr/lib/dracut/modules.d/40network/net-lib.sh 0644L /bin/sh [ 228s] dracut-network.i686: W: non-executable-script /usr/lib/dracut/modules.d/40network/parse-vlan.sh 0644L /bin/sh [ 228s] dracut.i686: W: non-executable-script /usr/lib/dracut/modules.d/98pollcdrom/pollcdrom.sh 0644L /bin/sh [ 228s] dracut.i686: W: non-executable-script /usr/share/bash-completion/completions/lsinitrd 0644L /bin/bash [ 228s] dracut.i686: W: non-executable-script /usr/lib/dracut/modules.d/91crypt-loop/crypt-loop-lib.sh 0644L /bin/sh [ 228s] dracut.i686: W: non-executable-script /usr/lib/dracut/modules.d/50drm/module-setup.sh 0644L /bin/bash [ 228s] dracut.i686: W: non-executable-script /usr/lib/dracut/modules.d/03modsign/module-setup.sh 0644L /bin/bash [ 228s] dracut.i686: W: non-executable-script /usr/lib/dracut/modules.d/03modsign/load-modsign-keys.sh 0644L /bin/sh [ 228s] dracut.i686: W: non-executable-script /usr/share/bash-completion/completions/dracut 0644L /bin/bash [ 228s] This text file contains a shebang or is located in a path dedicated for [ 228s] executables, but lacks the executable bits and cannot thus be executed. If [ 228s] the file is meant to be an executable script, add the executable bits, [ 228s] otherwise remove the shebang or move the file elsewhere. [ 228s] [ 228s] dracut.i686: W: missing-dependency-to-logrotate for logrotate script /etc/logrotate.d/dracut_log [ 228s] This package installs a file in /etc/logrotate.d/ but doesn't require [ 228s] logrotate to be installed. Because logrotate is not part of the essential [ 228s] packages, your package should explicitely depend on logrotate to make sure [ 228s] that your logrotate job is executed. If it is an optional feature of your [ 228s] package, recommend or suggest logrotate. [ 228s] [ 228s] dracut.i686: W: incoherent-logrotate-file /etc/logrotate.d/dracut_log [ 228s] Your logrotate file should be named /etc/logrotate.d/. [ 228s] [ 228s] dracut.i686: W: ghost-files-without-postin [ 228s] dracut-caps.i686: W: explicit-lib-dependency libcap [ 228s] You must let rpm find the library dependencies by itself. Do not put unneeded [ 228s] explicit Requires: tags. [ 228s] [ 228s] 5 packages and 0 specfiles checked; 0 errors, 15 warnings. [ 228s] [ 228s] ... creating baselibs [ 228s] ... comparing built packages with the former built [ 228s] /usr/lib/build/rpm-check.sh [ 228s] compare /.build.oldpackages/dracut-032-10.6.src.rpm /home/abuild/rpmbuild/SRPMS/dracut-032-10.7.src.rpm [ 228s] comparing rpmtags [ 228s] comparing RELEASE [ 228s] comparing PROVIDES [ 228s] comparing scripts [ 228s] comparing filelist [ 228s] comparing file checksum [ 228s] compare /.build.oldpackages/dracut-032-10.6.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-032-10.7.i686.rpm [ 228s] comparing rpmtags [ 228s] comparing RELEASE [ 228s] comparing PROVIDES [ 228s] comparing scripts [ 228s] comparing filelist [ 228s] comparing file checksum [ 228s] creating rename script [ 228s] RPM file checksum differs. [ 228s] Extracting packages [ 229s] /usr/lib/dracut/dracut-install: only difference was in build-id or gnu_debuglink, GOOD. [ 229s] /usr/lib/dracut/dracut-version.sh differs ( ASCII text) [ 229s] --- old//usr/lib/dracut/dracut-version.sh 2015-02-25 10:31:18.000000000 +0000 [ 229s] +++ new//usr/lib/dracut/dracut-version.sh 2015-02-26 13:07:25.000000000 +0000 [ 229s] @@ -1 +1 @@ [ 229s] -DRACUT_VERSION=032-10.6 [ 229s] +DRACUT_VERSION=032-10.7 [ 229s] compare /.build.oldpackages/dracut-caps-032-10.6.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-caps-032-10.7.i686.rpm [ 229s] comparing rpmtags [ 229s] comparing RELEASE [ 229s] comparing PROVIDES [ 229s] comparing scripts [ 229s] comparing filelist [ 229s] comparing file checksum [ 229s] creating rename script [ 229s] RPM meta information is identical [ 229s] compare /.build.oldpackages/dracut-debuginfo-032-10.6.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-debuginfo-032-10.7.i686.rpm [ 229s] skipping -debuginfo package [ 229s] compare /.build.oldpackages/dracut-debugsource-032-10.6.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-debugsource-032-10.7.i686.rpm [ 229s] comparing rpmtags [ 229s] comparing RELEASE [ 230s] comparing PROVIDES [ 230s] comparing scripts [ 230s] comparing filelist [ 230s] comparing file checksum [ 230s] creating rename script [ 230s] RPM meta information is identical [ 230s] compare /.build.oldpackages/dracut-network-032-10.6.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-network-032-10.7.i686.rpm [ 230s] comparing rpmtags [ 230s] comparing RELEASE [ 230s] comparing PROVIDES [ 230s] comparing scripts [ 230s] comparing filelist [ 230s] comparing file checksum [ 230s] creating rename script [ 230s] RPM meta information is identical [ 230s] compare /.build.oldpackages/dracut-tools-032-10.6.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-tools-032-10.7.i686.rpm [ 230s] comparing rpmtags [ 230s] comparing RELEASE [ 230s] comparing PROVIDES [ 230s] comparing scripts [ 230s] comparing filelist [ 230s] comparing file checksum [ 230s] creating rename script [ 230s] RPM file checksum differs. [ 230s] Extracting packages [ 230s] RPM content is identical [ 230s] comparing /.build.oldpackages/rpmlint.log and /home/abuild/rpmbuild/OTHER/rpmlint.log [ 230s] ... saving built statistics [ 230s] ... saving built packages [ 231s] /home/abuild/rpmbuild/RPMS/i686/dracut-032-10.7.i686.rpm [ 231s] /home/abuild/rpmbuild/RPMS/i686/dracut-caps-032-10.7.i686.rpm [ 231s] /home/abuild/rpmbuild/RPMS/i686/dracut-debuginfo-032-10.7.i686.rpm [ 231s] /home/abuild/rpmbuild/RPMS/i686/dracut-debugsource-032-10.7.i686.rpm [ 231s] /home/abuild/rpmbuild/RPMS/i686/dracut-network-032-10.7.i686.rpm [ 231s] /home/abuild/rpmbuild/RPMS/i686/dracut-tools-032-10.7.i686.rpm [ 231s] /home/abuild/rpmbuild/SRPMS/dracut-032-10.7.src.rpm [ 231s] /home/abuild/rpmbuild/OTHER/_statistics [ 231s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 231s] [ 231s] w12 finished "build dracut.spec" at Thu Feb 26 13:07:32 UTC 2015. [ 231s] [ 234s] [ 227.713201] SysRq : Power Off [ 234s] [ 227.820289] Power down. [ 237s] build: extracting built packages... [ 246s] dracut-032-10.7.i686.rpm [ 246s] dracut-caps-032-10.7.i686.rpm [ 246s] dracut-debuginfo-032-10.7.i686.rpm [ 246s] dracut-debugsource-032-10.7.i686.rpm [ 246s] dracut-network-032-10.7.i686.rpm [ 246s] dracut-tools-032-10.7.i686.rpm [ 246s] dracut-032-10.7.src.rpm [ 246s] _statistics [ 246s] rpmlint.log