[ 0s] Using BUILD_ROOT=/srv/build/root_3/.mount [ 0s] Using BUILD_ARCH=x86_64:i686:i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_3/root [ 0s] [ 0s] [ 0s] w18 started "build _service:gbs:dracut.spec" at Thu Feb 26 13:14:31 UTC 2015. [ 0s] [ 0s] Building dracut for project 'Tizen:3.0.2014.Q4:Common' repository 'x86_64-x11' arch 'x86_64' srcmd5 '4eea46b54682ca00f8b3dbe75acf059f' [ 0s] [ 0s] processing specfile /srv/build/root_3/.build-srcdir/_service:gbs:dracut.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_3/.build-srcdir/_service:gbs:dracut.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/3/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_3/.build.rpmlist /srv/build/root_3/.build-srcdir/_service:gbs:dracut.spec build rpmlint-Factory ... [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/35] preinstalling libmagic-data... [ 1s] [2/35] preinstalling setup... [ 1s] [3/35] preinstalling filesystem... [ 1s] [4/35] preinstalling glibc... [ 1s] [5/35] preinstalling bash... [ 1s] [6/35] preinstalling diffutils... [ 1s] [7/35] preinstalling libattr... [ 1s] [8/35] preinstalling libbz2... [ 1s] [9/35] preinstalling libcap... [ 1s] [10/35] preinstalling libelf... [ 1s] [11/35] preinstalling libfreebl3... [ 1s] [12/35] preinstalling libgcc_s1... [ 1s] [13/35] preinstalling liblua... [ 1s] [14/35] preinstalling liblzma... [ 1s] [15/35] preinstalling libncurses... [ 1s] [16/35] preinstalling libpopt... [ 2s] [17/35] preinstalling libsmack... [ 2s] [18/35] preinstalling libsqlite... [ 2s] [19/35] preinstalling nspr... [ 2s] [20/35] preinstalling sed... [ 2s] [21/35] preinstalling tar... [ 2s] [22/35] preinstalling zlib... [ 2s] [23/35] preinstalling grep... [ 2s] [24/35] preinstalling libacl... [ 2s] [25/35] preinstalling libreadline... [ 2s] [26/35] preinstalling smack... [ 2s] [27/35] preinstalling bzip2... [ 2s] [28/35] preinstalling libmagic... [ 2s] [29/35] preinstalling libxml2... [ 2s] [30/35] preinstalling util-linux... [ 2s] [31/35] preinstalling coreutils... [ 2s] [32/35] preinstalling nss... [ 2s] [33/35] preinstalling libsoftokn3... [ 2s] [34/35] preinstalling rpm... [ 2s] [35/35] preinstalling rpm-security-plugin... [ 2s] [ 2s] [1/8] preinstalling libext2fs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling perl... [ 3s] [5/8] preinstalling grep... [ 3s] [6/8] preinstalling libblkid... [ 3s] [7/8] preinstalling libmount... [ 3s] [8/8] preinstalling util-linux... [ 3s] copying packages... [ 4s] reordering...cycle: gcc49-locale -> gcc49 [ 4s] breaking dependency gcc49 -> gcc49-locale [ 4s] cycle: coreutils -> pam [ 4s] breaking dependency pam -> coreutils [ 4s] cycle: nss -> libsoftokn3 [ 4s] breaking dependency nss -> libsoftokn3 [ 4s] done [ 8s] booting kvm ... [ 8s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 8192 -drive file=/srv/build/root_3/root,if=virtio,cache=none -drive file=/srv/build/root_3/root,if=ide,index=0,cache=none -drive file=/srv/build/root_3/swap,if=virtio,cache=none -smp 4 [ 11s] doing fast boot [ 11s] Creating device nodes with udev [ 15s] Waiting for device /dev/vda to appear: ok [ 15s] fsck from util-linux 2.21.2 [ 15s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 15s] /dev/vda: clean, 4500/2392064 files, 196962/9568256 blocks [ 15s] fsck succeeded. Mounting root device read-write. [ 15s] Mounting root /dev/vda [ 15s] mount -o rw -t ext4 /dev/vda /root [ 17s] replacing /etc/mtab with symlink to /proc/self/mounts [ 17s] 2nd stage started in virtual machine [ 17s] machine type: x86_64 [ 17s] swapon /dev/vdb [ 17s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 17s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 17s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 17s] mount: none is already mounted or /proc busy [ 17s] mount: none is already mounted or /dev/pts busy [ 17s] logging output to //.build.log... [ 17s] processing specfile /.build-srcdir/_service:gbs:dracut.spec ... [ 17s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:dracut.spec build rpmlint-Factory ... [ 17s] running setup postinstall script [ 17s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 17s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 17s] initializing rpm db... [ 18s] [1/128] installing libmagic-data-5.18-7.1 [ 18s] [2/128] installing libstdc++-locale-4.9.2-8.11 [ 18s] [3/128] installing setup-0.9-9.2 [ 18s] [4/128] installing terminfo-base-5.9-5.2 [ 18s] [5/128] installing filesystem-3.1-10.1 [ 18s] error: Failed to set SMACK64 _ for /proc: Operation not supported [ 18s] [6/128] installing glibc-2.20-6.6 [ 18s] [7/128] installing bash-4.3.30-14.2 [ 18s] [8/128] installing cpio-2.11-6.1 [ 18s] [9/128] installing diffutils-3.3-6.1 [ 18s] [10/128] installing findutils-4.5.14-6.1 [ 18s] [11/128] installing gawk-4.1.1-7.2 [ 18s] [12/128] installing hostname-3.12-5.1 [ 18s] [13/128] installing libatomic-4.9.2-8.11 [ 18s] [14/128] installing libattr-2.4.47-7.1 [ 18s] [15/128] installing libbz2-1.0.6-6.8 [ 18s] [16/128] installing libcap-2.24-6.7 [ 18s] [17/128] installing libcares-1.10.0-7.1 [ 19s] [18/128] installing libelf-0.160-6.5 [ 19s] [19/128] installing libexpat-2.1.0-5.1 [ 19s] [20/128] installing libext2fs-1.42.11-9.1 [ 19s] [21/128] installing libfreebl3-3.17.1-10.12 [ 19s] [22/128] installing libgcc_s1-4.9.2-8.11 [ 19s] [23/128] installing libgdbm-1.11-8.1 [ 19s] [24/128] installing libgmp-6.0.0-6.2 [ 19s] [25/128] installing libgomp-4.9.2-8.11 [ 19s] [26/128] installing libgpg-error-1.13-6.5 [ 19s] [27/128] installing libitm-4.9.2-8.11 [ 19s] [28/128] installing libltdl-2.4.2-5.1 [ 19s] [29/128] installing liblua-5.1.4-8.1 [ 19s] [30/128] installing liblzma-5.1.3-7.1 [ 19s] [31/128] installing libpcre-8.31-5.1 [ 19s] [32/128] installing libpopt-1.16-5.1 [ 19s] [33/128] installing libpython-2.7.8-7.4 [ 19s] [34/128] installing libsmack-1.0.5-10.1 [ 19s] [35/128] installing libsqlite-3.7.14-10.1 [ 19s] [36/128] installing libuuid-2.24.2-8.4 [ 19s] [37/128] installing m4-1.4.17-6.1 [ 19s] [38/128] installing net-tools-2.0_20121208git-5.1 [ 19s] [39/128] installing nspr-4.10.7-7.3 [ 19s] [40/128] installing patch-2.7-5.1 [ 19s] [41/128] installing pkg-config-0.28-5.1 [ 19s] [42/128] installing sed-4.2.2-7.1 [ 19s] [43/128] installing tar-1.27-6.1 [ 19s] [44/128] installing update-alternatives-1.16.3-7.1 [ 20s] [45/128] installing which-2.20-6.1 [ 20s] [46/128] installing zlib-1.2.8-6.1 [ 20s] [47/128] installing libncurses-5.9-5.2 [ 20s] [48/128] installing build-compare-2014.11.25-7.5 [ 20s] [49/128] installing gcc49-info-4.9.2-8.11 [ 20s] [50/128] installing dash-0.5.7-6.1 [ 20s] [51/128] installing less-466-7.1 [ 20s] [52/128] installing libacl-2.2.52-7.1 [ 20s] [53/128] installing libasm-0.160-6.5 [ 20s] [54/128] installing libblkid-2.24.2-8.4 [ 20s] [55/128] installing libgcrypt-1.6.2-6.5 [ 20s] [56/128] installing libidn-1.25-5.1 [ 20s] [57/128] installing libmpfr-3.1.2-6.1 [ 20s] [58/128] installing libopenssl-1.0.1j-8.1 [ 20s] [59/128] installing libreadline-5.2-5.3 [ 20s] [60/128] installing make-4.0-7.1 [ 20s] [61/128] installing nss-certs-3.17.1-10.12 [ 20s] [62/128] installing smack-1.0.5-10.1 [ 20s] [63/128] installing bzip2-1.0.6-6.8 [ 20s] [64/128] installing grep-2.19-6.1 [ 20s] [65/128] installing libmagic-5.18-7.1 [ 20s] [66/128] installing libstdc++-4.9.2-8.11 [ 20s] [67/128] installing libxml2-2.8.0-7.1 [ 21s] [68/128] installing xz-5.1.3-7.1 [ 21s] [69/128] installing binutils-2.25-11.2 [ 23s] update-alternatives: using /usr/bin/ld.bfd to provide /usr/bin/ld (ld) in auto mode. [ 23s] [70/128] installing libdw-0.160-6.5 [ 23s] [71/128] installing file-5.18-7.1 [ 23s] [72/128] installing db4-4.8.30.NC-6.1 [ 24s] [73/128] installing libasan-4.9.2-8.11 [ 24s] [74/128] installing libcilkrts-4.9.2-8.11 [ 24s] [75/128] installing liblsan-4.9.2-8.11 [ 24s] [76/128] installing libmount-2.24.2-8.4 [ 24s] [77/128] installing libmpc-1.0-6.1 [ 24s] [78/128] installing libtsan-4.9.2-8.11 [ 24s] [79/128] installing libubsan-4.9.2-8.11 [ 24s] [80/128] installing libxml2-tools-2.8.0-7.1 [ 24s] [81/128] installing rsync-3.1.1-6.1 [ 24s] [82/128] installing libcurl-7.37.1-7.1 [ 24s] [83/128] installing libxslt-1.1.28-6.1 [ 24s] [84/128] installing elfutils-0.160-6.5 [ 24s] [85/128] installing libxslt-tools-1.1.28-6.1 [ 25s] [86/128] installing cpp49-4.9.2-8.11 [ 25s] [87/128] installing perl-5.20.0-6.5 [ 53s] [88/128] installing python-2.7.8-7.4 [ 55s] [89/128] installing build-mkbaselibs-20120927-7.1 [ 55s] [90/128] installing perl-Error-0.17017-5.3 [ 55s] [91/128] installing cpp-4.9-8.1 [ 56s] [92/128] installing autoconf-2.69-6.1 [ 58s] [93/128] installing python-xml-2.7.8-7.4 [ 58s] [94/128] installing build-20120927-7.1 [ 59s] [95/128] installing pam-1.1.6-8.1 [ 60s] [96/128] installing nss-3.17.1-10.12 [ 62s] [97/128] installing pam-modules-extra-1.1.6-8.1 [ 63s] [98/128] installing libsoftokn3-3.17.1-10.12 [ 64s] [99/128] installing pwdutils-3.2.19-7.1 [ 65s] [100/128] installing coreutils-8.21-8.1 [ 74s] [101/128] installing util-linux-2.24.2-8.4 [ 76s] [102/128] installing rpm-4.11.0.1-26.1 [ 80s] [103/128] installing linux-glibc-devel-3.10-6.1 [ 83s] [104/128] installing glibc-locale-2.20-6.6 [ 91s] [105/128] installing gzip-1.6-5.1 [ 91s] [106/128] installing automake-1.14.1-7.1 [ 92s] [107/128] installing sgml-skel-0.6-5.1 [ 92s] [108/128] installing tzdata-2014h-7.1 [ 93s] [109/128] installing openssh-6.6p1-7.1 [ 94s] [110/128] installing rpmlint-mini-1.5-10.3 [ 95s] [111/128] installing rpm-security-plugin-4.11.0.1-26.1 [ 95s] warning: /etc/device-sec-policy created as /etc/device-sec-policy.rpmnew [ 95s] [112/128] installing rpmlint-tizen-1.0-5.1 [ 95s] [113/128] installing glibc-devel-2.20-6.6 [ 96s] [114/128] installing iso_ent-2000.11.03-6.1 [ 97s] [115/128] installing libtool-2.4.2-5.1 [ 97s] [116/128] installing xmlcharent-0.3-5.1 [ 98s] [117/128] installing git-core-2.0.1-8.3 [ 98s] [118/128] installing git-2.0.1-8.3 [ 98s] [119/128] installing libstdc++49-devel-4.9.2-8.11 [ 102s] [120/128] installing docbook_4-4.5-6.1 [ 103s] [121/128] installing gcc49-4.9.2-8.11 [ 106s] [122/128] installing gcc49-locale-4.9.2-8.11 [ 107s] [123/128] installing gcc-4.9-8.1 [ 107s] [124/128] installing gcc49-c++-4.9.2-8.11 [ 109s] [125/128] installing docbook-xsl-stylesheets-1.78.1-7.4 [ 111s] [126/128] installing gcc-c++-4.9-8.1 [ 112s] [127/128] installing asciidoc-8.6.6-6.1 [ 112s] [128/128] installing rpm-build-4.11.0.1-26.1 [ 112s] removing nis flags from //etc/nsswitch.conf... [ 112s] now finalizing build dir... [ 113s] ----------------------------------------------------------------- [ 113s] I have the following modifications for dracut.spec: [ 113s] 9c9 [ 113s] < Release: 0 [ 113s] --- [ 113s] > Release: 10.8 [ 113s] 252a253 [ 113s] > %changelog [ 113s] ----------------------------------------------------------------- [ 113s] ----- building dracut.spec (user abuild) [ 113s] ----------------------------------------------------------------- [ 113s] ----------------------------------------------------------------- [ 113s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0.2014.Q4:Common/x86_64-x11/4eea46b54682ca00f8b3dbe75acf059f-dracut' /home/abuild/rpmbuild/SOURCES/dracut.spec [ 113s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.jZNnzE [ 113s] + umask 022 [ 113s] + cd /home/abuild/rpmbuild/BUILD [ 113s] + cd /home/abuild/rpmbuild/BUILD [ 113s] + rm -rf dracut-032 [ 113s] + /bin/tar -xf - [ 113s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/dracut-032.tar.xz [ 113s] + STATUS=0 [ 113s] + '[' 0 -ne 0 ']' [ 113s] + cd dracut-032 [ 113s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 113s] + cp /home/abuild/rpmbuild/SOURCES/dracut.manifest . [ 113s] + exit 0 [ 113s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.xnGRZ1 [ 113s] + umask 022 [ 113s] + cd /home/abuild/rpmbuild/BUILD [ 113s] + cd dracut-032 [ 113s] ++ uname -m [ 113s] + [[ x86_64 == \a\a\r\c\h\6\4 ]] [ 113s] + LANG=C [ 113s] + export LANG [ 113s] + unset DISPLAY [ 113s] + CFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -m64 -march=corei7 -mtune=corei7-avx -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 113s] + export CFLAGS [ 113s] + CXXFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -m64 -march=corei7 -mtune=corei7-avx -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 113s] + export CXXFLAGS [ 113s] + FFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -m64 -march=corei7 -mtune=corei7-avx -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I%_fmoddir' [ 113s] + export FFLAGS [ 113s] + LD_AS_NEEDED=1 [ 113s] + export LD_AS_NEEDED [ 113s] + make all [ 113s] cc -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -m64 -march=corei7 -mtune=corei7-avx -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/dracut-install.o install/dracut-install.c [ 113s] install/dracut-install.c: In function 'resolve_deps': [ 113s] install/dracut-install.c:338:17: warning: ignoring return value of 'read', declared with attribute warn_unused_result [-Wunused-result] [ 113s] read(fd, buf, LINE_MAX); [ 113s] ^ [ 113s] install/dracut-install.c: In function 'cp': [ 113s] install/dracut-install.c:223:33: warning: ignoring return value of 'fchown', declared with attribute warn_unused_result [-Wunused-result] [ 113s] fchown(dest_desc, (__uid_t)-1, sb.st_gid); [ 113s] ^ [ 113s] cc -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -m64 -march=corei7 -mtune=corei7-avx -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/hashmap.o install/hashmap.c [ 114s] cc -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -m64 -march=corei7 -mtune=corei7-avx -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/log.o install/log.c [ 114s] cc -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -m64 -march=corei7 -mtune=corei7-avx -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/util.o install/util.c [ 114s] cc install/dracut-install.o install/hashmap.o install/log.o install/util.o -o install/dracut-install [ 114s] ln -fs install/dracut-install dracut-install [ 114s] asciidoc -d manpage -b docbook -o lsinitrd.1.xml lsinitrd.1.asc [ 114s] xsltproc -o lsinitrd.1 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl lsinitrd.1.xml [ 115s] Note: Writing lsinitrd.1 [ 115s] asciidoc -d manpage -b docbook -o dracut.conf.5.xml dracut.conf.5.asc [ 115s] xsltproc -o dracut.conf.5 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.conf.5.xml [ 115s] Note: Writing dracut.conf.5 [ 115s] asciidoc -d manpage -b docbook -o dracut.cmdline.7.xml dracut.cmdline.7.asc [ 117s] xsltproc -o dracut.cmdline.7 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.cmdline.7.xml [ 117s] Note: Writing dracut.cmdline.7 [ 117s] asciidoc -d manpage -b docbook -o dracut.bootup.7.xml dracut.bootup.7.asc [ 117s] xsltproc -o dracut.bootup.7 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.bootup.7.xml [ 117s] Note: Writing dracut.bootup.7 [ 117s] asciidoc -d manpage -b docbook -o dracut.8.xml dracut.8.asc [ 118s] xsltproc -o dracut.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.8.xml [ 119s] Note: Writing dracut.8 [ 119s] asciidoc -d manpage -b docbook -o dracut-catimages.8.xml dracut-catimages.8.asc [ 119s] xsltproc -o dracut-catimages.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut-catimages.8.xml [ 119s] Note: Writing dracut-catimages.8 [ 119s] asciidoc -d manpage -b docbook -o mkinitrd.8.xml mkinitrd.8.asc [ 120s] xsltproc -o mkinitrd.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl mkinitrd.8.xml [ 120s] Note: Writing mkinitrd.8 [ 120s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-cmdline.service.8.xml modules.d/98systemd/dracut-cmdline.service.8.asc [ 120s] xsltproc -o modules.d/98systemd/dracut-cmdline.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-cmdline.service.8.xml [ 120s] Note: Writing dracut-cmdline.service.8 [ 120s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-initqueue.service.8.xml modules.d/98systemd/dracut-initqueue.service.8.asc [ 121s] xsltproc -o modules.d/98systemd/dracut-initqueue.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-initqueue.service.8.xml [ 121s] Note: Writing dracut-initqueue.service.8 [ 121s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-mount.service.8.xml modules.d/98systemd/dracut-mount.service.8.asc [ 121s] xsltproc -o modules.d/98systemd/dracut-mount.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-mount.service.8.xml [ 121s] Note: Writing dracut-mount.service.8 [ 121s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-shutdown.service.8.xml modules.d/98systemd/dracut-shutdown.service.8.asc [ 122s] xsltproc -o modules.d/98systemd/dracut-shutdown.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-shutdown.service.8.xml [ 122s] Note: Writing dracut-shutdown.service.8 [ 122s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-mount.service.8.xml modules.d/98systemd/dracut-pre-mount.service.8.asc [ 122s] xsltproc -o modules.d/98systemd/dracut-pre-mount.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-mount.service.8.xml [ 122s] Note: Writing dracut-pre-mount.service.8 [ 122s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-pivot.service.8.xml modules.d/98systemd/dracut-pre-pivot.service.8.asc [ 123s] xsltproc -o modules.d/98systemd/dracut-pre-pivot.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-pivot.service.8.xml [ 123s] Note: Writing dracut-pre-pivot.service.8 [ 123s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-trigger.service.8.xml modules.d/98systemd/dracut-pre-trigger.service.8.asc [ 123s] xsltproc -o modules.d/98systemd/dracut-pre-trigger.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-trigger.service.8.xml [ 123s] Note: Writing dracut-pre-trigger.service.8 [ 123s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-udev.service.8.xml modules.d/98systemd/dracut-pre-udev.service.8.asc [ 123s] xsltproc -o modules.d/98systemd/dracut-pre-udev.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-udev.service.8.xml [ 124s] Note: Writing dracut-pre-udev.service.8 [ 124s] asciidoc -a numbered -d book -b docbook -o dracut.xml dracut.asc [ 127s] xsltproc -o dracut.html --xinclude -nonet \ [ 127s] --stringparam html.stylesheet \ [ 127s] http://docs.fedoraproject.org/en-US/Common_Content/css/default.css \ [ 127s] http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl dracut.xml [ 128s] rm -f -- dracut.xml [ 128s] rm modules.d/98systemd/dracut-mount.service.8.xml dracut.8.xml dracut.cmdline.7.xml modules.d/98systemd/dracut-pre-mount.service.8.xml dracut.bootup.7.xml modules.d/98systemd/dracut-initqueue.service.8.xml modules.d/98systemd/dracut-pre-pivot.service.8.xml mkinitrd.8.xml modules.d/98systemd/dracut-cmdline.service.8.xml dracut.conf.5.xml lsinitrd.1.xml modules.d/98systemd/dracut-pre-udev.service.8.xml dracut-catimages.8.xml modules.d/98systemd/dracut-pre-trigger.service.8.xml modules.d/98systemd/dracut-shutdown.service.8.xml [ 128s] + exit 0 [ 128s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.tXByzi [ 128s] + umask 022 [ 128s] + cd /home/abuild/rpmbuild/BUILD [ 128s] + cd dracut-032 [ 128s] + LANG=C [ 128s] + export LANG [ 128s] + unset DISPLAY [ 128s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64 [ 128s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64 [ 128s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64 libdir=/usr/lib bindir=/usr/bin systemdsystemunitdir=/usr/lib/systemd/system sysconfdir=/etc mandir=/usr/share/man [ 128s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/lib/dracut [ 128s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/bin [ 128s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/etc [ 128s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/lib/dracut/modules.d [ 128s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/share/man/man1 /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/share/man/man5 /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/share/man/man7 /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/share/man/man8 [ 128s] install -m 0755 dracut.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/bin/dracut [ 128s] install -m 0755 dracut-catimages.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/bin/dracut-catimages [ 128s] install -m 0755 mkinitrd-dracut.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/bin/mkinitrd [ 128s] install -m 0755 lsinitrd.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/bin/lsinitrd [ 128s] install -m 0644 dracut.conf /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/etc/dracut.conf [ 128s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/etc/dracut.conf.d [ 128s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/lib/dracut/dracut.conf.d [ 128s] install -m 0755 dracut-functions.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/lib/dracut/dracut-functions.sh [ 128s] install -m 0755 dracut-version.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/lib/dracut/dracut-version.sh [ 128s] ln -fs dracut-functions.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/lib/dracut/dracut-functions [ 128s] install -m 0755 dracut-logger.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/lib/dracut/dracut-logger.sh [ 128s] install -m 0755 dracut-initramfs-restore.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/lib/dracut/dracut-initramfs-restore [ 128s] cp -arx modules.d /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/lib/dracut [ 128s] for i in lsinitrd.1; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/share/man/man1/${i##*/}; done [ 128s] for i in dracut.conf.5; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/share/man/man5/${i##*/}; done [ 128s] for i in dracut.cmdline.7 dracut.bootup.7; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/share/man/man7/${i##*/}; done [ 128s] for i in dracut.8 dracut-catimages.8 mkinitrd.8 modules.d/98systemd/dracut-cmdline.service.8 modules.d/98systemd/dracut-initqueue.service.8 modules.d/98systemd/dracut-mount.service.8 modules.d/98systemd/dracut-shutdown.service.8 modules.d/98systemd/dracut-pre-mount.service.8 modules.d/98systemd/dracut-pre-pivot.service.8 modules.d/98systemd/dracut-pre-trigger.service.8 modules.d/98systemd/dracut-pre-udev.service.8; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/share/man/man8/${i##*/}; done [ 128s] ln -fs dracut.cmdline.7 /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/share/man/man7/dracut.kernel.7 [ 128s] if [ -n "/usr/lib/systemd/system" ]; then \ [ 128s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/lib/systemd/system; \ [ 128s] ln -srf /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/lib/dracut/modules.d/98systemd/dracut-shutdown.service /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/lib/systemd/system/dracut-shutdown.service; \ [ 128s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/lib/systemd/system/shutdown.target.wants; \ [ 128s] ln -s ../dracut-shutdown.service \ [ 128s] /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/lib/systemd/system/shutdown.target.wants/dracut-shutdown.service; \ [ 128s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/lib/systemd/system/initrd.target.wants; \ [ 128s] for i in \ [ 128s] dracut-cmdline.service \ [ 128s] dracut-initqueue.service \ [ 128s] dracut-mount.service \ [ 128s] dracut-pre-mount.service \ [ 128s] dracut-pre-pivot.service \ [ 128s] dracut-pre-trigger.service \ [ 128s] dracut-pre-udev.service \ [ 128s] ; do \ [ 128s] ln -srf /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/lib/dracut/modules.d/98systemd/$i /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/lib/systemd/system; \ [ 128s] ln -s ../$i \ [ 128s] /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/lib/systemd/system/initrd.target.wants/$i; \ [ 128s] done \ [ 128s] fi [ 128s] if [ -f install/dracut-install ]; then \ [ 128s] install -m 0755 install/dracut-install /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/lib/dracut/dracut-install; \ [ 128s] fi [ 128s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/lib/kernel/install.d [ 128s] install -m 0755 50-dracut.install /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/lib/kernel/install.d/50-dracut.install [ 128s] install -m 0755 51-dracut-rescue.install /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/lib/kernel/install.d/51-dracut-rescue.install [ 128s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/share/bash-completion/completions [ 128s] install -m 0644 dracut-bash-completion.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/share/bash-completion/completions/dracut [ 128s] install -m 0644 lsinitrd-bash-completion.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/share/bash-completion/completions/lsinitrd [ 128s] + echo DRACUT_VERSION=032-10.8 [ 128s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64//usr/lib/dracut/modules.d/01fips [ 128s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64//usr/lib/dracut/modules.d/02fips-aesni [ 128s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64//usr/lib/dracut/modules.d/50gensplash [ 128s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64//usr/lib/dracut/modules.d/96securityfs [ 128s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64//usr/lib/dracut/modules.d/97masterkey [ 128s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64//usr/lib/dracut/modules.d/98integrity [ 128s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64//usr/lib/dracut/modules.d/98selinux [ 128s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/boot/dracut [ 128s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/var/lib/dracut/overlay [ 128s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/var/log [ 128s] + touch /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/var/log/dracut.log [ 128s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/com/initramfs [ 128s] + install -m 0644 dracut.conf.d/suse.conf.example /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/etc/dracut.conf.d/01-dist.conf [ 128s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/etc/logrotate.d [ 128s] + install -m 0644 dracut.logrotate /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/etc/logrotate.d/dracut_log [ 128s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/dracut-032 [ 128s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/lib/dracut/dracut-install [ 128s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 128s] cpio: glibc-2.20/csu/elf-init.c: Cannot stat: No such file or directory [ 128s] cpio: glibc-2.20/csu/init.c: Cannot stat: No such file or directory [ 128s] cpio: glibc-2.20/sysdeps/x86_64/crti.S: Cannot stat: No such file or directory [ 128s] cpio: glibc-2.20/sysdeps/x86_64/crtn.S: Cannot stat: No such file or directory [ 128s] cpio: glibc-2.20/sysdeps/x86_64/start.S: Cannot stat: No such file or directory [ 128s] 195 blocks [ 128s] + /usr/lib/rpm/brp-compress [ 128s] + /usr/lib/rpm/brp-tizen [ 128s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64 [ 128s] Processing files: dracut-032-10.8.x86_64 [ 128s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 128s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 128s] [ 128s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.7BUXjC [ 128s] + umask 022 [ 128s] + cd /home/abuild/rpmbuild/BUILD [ 128s] + cd dracut-032 [ 128s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/share/licenses/dracut [ 128s] + export LICENSEDIR [ 128s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/share/licenses/dracut [ 128s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64/usr/share/licenses/dracut [ 128s] + exit 0 [ 129s] Provides: config(dracut) = 032-10.8 dracut = 032-10.8 dracut(x86-64) = 032-10.8 [ 129s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 129s] Requires: /bin/bash /bin/sh libc.so.6()(64bit) libc.so.6(GLIBC_2.14)(64bit) libc.so.6(GLIBC_2.2.5)(64bit) libc.so.6(GLIBC_2.3)(64bit) libc.so.6(GLIBC_2.3.4)(64bit) libc.so.6(GLIBC_2.4)(64bit) libc.so.6(GLIBC_2.7)(64bit) libc.so.6(GLIBC_2.8)(64bit) libgcc_s.so.1()(64bit) libgcc_s.so.1(GCC_3.0)(64bit) libgcc_s.so.1(GCC_3.3.1)(64bit) [ 129s] Conflicts: systemd < 187 [ 129s] Processing files: dracut-debugsource-032-10.8.x86_64 [ 129s] Provides: dracut-debugsource = 032-10.8 dracut-debugsource(x86-64) = 032-10.8 [ 129s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 129s] Processing files: dracut-network-032-10.8.x86_64 [ 129s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 129s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 129s] [ 129s] Provides: dracut-network = 032-10.8 dracut-network(x86-64) = 032-10.8 [ 129s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 129s] Requires: /bin/bash /bin/sh [ 129s] Processing files: dracut-caps-032-10.8.x86_64 [ 129s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 129s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 129s] [ 129s] Provides: dracut-caps = 032-10.8 dracut-caps(x86-64) = 032-10.8 [ 129s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 129s] Requires: /bin/bash [ 129s] Processing files: dracut-tools-032-10.8.x86_64 [ 129s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 129s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 129s] [ 129s] Provides: dracut-tools = 032-10.8 dracut-tools(x86-64) = 032-10.8 [ 129s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 129s] Requires: /bin/bash [ 129s] Processing files: dracut-debuginfo-032-10.8.x86_64 [ 129s] Provides: debuginfo(build-id) = bfb9b9e16d4125b2833315f194530f47b71405ec [ 129s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 129s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64 [ 129s] Wrote: /home/abuild/rpmbuild/SRPMS/dracut-032-10.8.src.rpm [ 129s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/dracut-032-10.8.x86_64.rpm [ 129s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/dracut-debugsource-032-10.8.x86_64.rpm [ 129s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/dracut-network-032-10.8.x86_64.rpm [ 129s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/dracut-caps-032-10.8.x86_64.rpm [ 129s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/dracut-tools-032-10.8.x86_64.rpm [ 129s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/dracut-debuginfo-032-10.8.x86_64.rpm [ 129s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.3BpXEC [ 129s] + umask 022 [ 129s] + cd /home/abuild/rpmbuild/BUILD [ 129s] + cd dracut-032 [ 129s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/dracut-032-10.8.x86_64 [ 129s] + exit 0 [ 129s] ... checking for files with abuild user/group [ 129s] [ 129s] RPMLINT report: [ 129s] =============== [ 131s] dracut.x86_64: W: tizen-filelist-forbidden-fhs23 /usr/com is not allowed in FHS 2.3 [ 131s] see http://www.pathname.com/fhs/ to find a better location [ 131s] [ 131s] dracut.x86_64: W: script-without-shebang /usr/lib/dracut/dracut-version.sh [ 131s] This text file has executable bits set or is located in a path dedicated for [ 131s] executables, but lacks a shebang and cannot thus be executed. If the file is [ 131s] meant to be an executable script, add the shebang, otherwise remove the [ 131s] executable bits or move the file elsewhere. [ 131s] [ 131s] dracut.x86_64: W: non-executable-script /usr/lib/dracut/modules.d/98pollcdrom/pollcdrom.sh 0644L /bin/sh [ 131s] dracut.x86_64: W: non-executable-script /usr/share/bash-completion/completions/lsinitrd 0644L /bin/bash [ 131s] dracut.x86_64: W: non-executable-script /usr/lib/dracut/modules.d/91crypt-loop/crypt-loop-lib.sh 0644L /bin/sh [ 131s] dracut.x86_64: W: non-executable-script /usr/lib/dracut/modules.d/50drm/module-setup.sh 0644L /bin/bash [ 131s] dracut.x86_64: W: non-executable-script /usr/lib/dracut/modules.d/03modsign/module-setup.sh 0644L /bin/bash [ 131s] dracut.x86_64: W: non-executable-script /usr/share/bash-completion/completions/dracut 0644L /bin/bash [ 131s] dracut.x86_64: W: non-executable-script /usr/lib/dracut/modules.d/03modsign/load-modsign-keys.sh 0644L /bin/sh [ 131s] dracut-network.x86_64: W: non-executable-script /usr/lib/dracut/modules.d/40network/net-lib.sh 0644L /bin/sh [ 131s] dracut-network.x86_64: W: non-executable-script /usr/lib/dracut/modules.d/40network/parse-vlan.sh 0644L /bin/sh [ 131s] This text file contains a shebang or is located in a path dedicated for [ 131s] executables, but lacks the executable bits and cannot thus be executed. If [ 131s] the file is meant to be an executable script, add the executable bits, [ 131s] otherwise remove the shebang or move the file elsewhere. [ 131s] [ 131s] dracut.x86_64: W: missing-dependency-to-logrotate for logrotate script /etc/logrotate.d/dracut_log [ 131s] This package installs a file in /etc/logrotate.d/ but doesn't require [ 131s] logrotate to be installed. Because logrotate is not part of the essential [ 131s] packages, your package should explicitely depend on logrotate to make sure [ 131s] that your logrotate job is executed. If it is an optional feature of your [ 131s] package, recommend or suggest logrotate. [ 131s] [ 131s] dracut.x86_64: W: incoherent-logrotate-file /etc/logrotate.d/dracut_log [ 131s] Your logrotate file should be named /etc/logrotate.d/. [ 131s] [ 131s] dracut.x86_64: W: ghost-files-without-postin [ 131s] dracut-caps.x86_64: W: explicit-lib-dependency libcap [ 131s] You must let rpm find the library dependencies by itself. Do not put unneeded [ 131s] explicit Requires: tags. [ 131s] [ 131s] 5 packages and 0 specfiles checked; 0 errors, 15 warnings. [ 131s] [ 131s] ... creating baselibs [ 132s] ... comparing built packages with the former built [ 132s] /usr/lib/build/rpm-check.sh [ 132s] compare /.build.oldpackages/dracut-032-10.7.src.rpm /home/abuild/rpmbuild/SRPMS/dracut-032-10.8.src.rpm [ 132s] comparing rpmtags [ 132s] comparing RELEASE [ 132s] comparing PROVIDES [ 132s] comparing scripts [ 132s] comparing filelist [ 132s] comparing file checksum [ 133s] compare /.build.oldpackages/dracut-032-10.7.x86_64.rpm /home/abuild/rpmbuild/RPMS/x86_64/dracut-032-10.8.x86_64.rpm [ 133s] comparing rpmtags [ 133s] comparing RELEASE [ 133s] comparing PROVIDES [ 133s] comparing scripts [ 133s] comparing filelist [ 133s] comparing file checksum [ 133s] creating rename script [ 133s] RPM file checksum differs. [ 133s] Extracting packages [ 133s] /usr/lib/dracut/dracut-install: only difference was in build-id or gnu_debuglink, GOOD. [ 133s] /usr/lib/dracut/dracut-version.sh differs ( ASCII text) [ 133s] --- old//usr/lib/dracut/dracut-version.sh 2015-02-25 09:50:00.000000000 +0000 [ 133s] +++ new//usr/lib/dracut/dracut-version.sh 2015-02-26 13:16:37.000000000 +0000 [ 133s] @@ -1 +1 @@ [ 133s] -DRACUT_VERSION=032-10.7 [ 133s] +DRACUT_VERSION=032-10.8 [ 133s] compare /.build.oldpackages/dracut-caps-032-10.7.x86_64.rpm /home/abuild/rpmbuild/RPMS/x86_64/dracut-caps-032-10.8.x86_64.rpm [ 133s] comparing rpmtags [ 133s] comparing RELEASE [ 133s] comparing PROVIDES [ 133s] comparing scripts [ 133s] comparing filelist [ 133s] comparing file checksum [ 133s] creating rename script [ 133s] RPM meta information is identical [ 133s] compare /.build.oldpackages/dracut-debuginfo-032-10.7.x86_64.rpm /home/abuild/rpmbuild/RPMS/x86_64/dracut-debuginfo-032-10.8.x86_64.rpm [ 133s] skipping -debuginfo package [ 133s] compare /.build.oldpackages/dracut-debugsource-032-10.7.x86_64.rpm /home/abuild/rpmbuild/RPMS/x86_64/dracut-debugsource-032-10.8.x86_64.rpm [ 133s] comparing rpmtags [ 133s] comparing RELEASE [ 133s] comparing PROVIDES [ 133s] comparing scripts [ 133s] comparing filelist [ 133s] comparing file checksum [ 133s] creating rename script [ 133s] RPM meta information is identical [ 133s] compare /.build.oldpackages/dracut-network-032-10.7.x86_64.rpm /home/abuild/rpmbuild/RPMS/x86_64/dracut-network-032-10.8.x86_64.rpm [ 133s] comparing rpmtags [ 133s] comparing RELEASE [ 134s] comparing PROVIDES [ 134s] comparing scripts [ 134s] comparing filelist [ 134s] comparing file checksum [ 134s] creating rename script [ 134s] RPM meta information is identical [ 134s] compare /.build.oldpackages/dracut-tools-032-10.7.x86_64.rpm /home/abuild/rpmbuild/RPMS/x86_64/dracut-tools-032-10.8.x86_64.rpm [ 134s] comparing rpmtags [ 134s] comparing RELEASE [ 134s] comparing PROVIDES [ 134s] comparing scripts [ 134s] comparing filelist [ 134s] comparing file checksum [ 134s] creating rename script [ 134s] RPM file checksum differs. [ 134s] Extracting packages [ 134s] RPM content is identical [ 134s] comparing /.build.oldpackages/rpmlint.log and /home/abuild/rpmbuild/OTHER/rpmlint.log [ 135s] ... saving built statistics [ 135s] ... saving built packages [ 135s] /home/abuild/rpmbuild/RPMS/x86_64/dracut-032-10.8.x86_64.rpm [ 135s] /home/abuild/rpmbuild/RPMS/x86_64/dracut-caps-032-10.8.x86_64.rpm [ 135s] /home/abuild/rpmbuild/RPMS/x86_64/dracut-debuginfo-032-10.8.x86_64.rpm [ 135s] /home/abuild/rpmbuild/RPMS/x86_64/dracut-debugsource-032-10.8.x86_64.rpm [ 135s] /home/abuild/rpmbuild/RPMS/x86_64/dracut-network-032-10.8.x86_64.rpm [ 135s] /home/abuild/rpmbuild/RPMS/x86_64/dracut-tools-032-10.8.x86_64.rpm [ 135s] /home/abuild/rpmbuild/SRPMS/dracut-032-10.8.src.rpm [ 135s] /home/abuild/rpmbuild/OTHER/_statistics [ 135s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 135s] [ 135s] w18 finished "build dracut.spec" at Thu Feb 26 13:16:45 UTC 2015. [ 135s] [ 140s] [ 129.533202] SysRq : Power Off [ 140s] [ 129.644216] Power down. [ 142s] build: extracting built packages... [ 146s] dracut-032-10.8.x86_64.rpm [ 146s] dracut-caps-032-10.8.x86_64.rpm [ 146s] dracut-debuginfo-032-10.8.x86_64.rpm [ 146s] dracut-debugsource-032-10.8.x86_64.rpm [ 146s] dracut-network-032-10.8.x86_64.rpm [ 146s] dracut-tools-032-10.8.x86_64.rpm [ 146s] dracut-032-10.8.src.rpm [ 146s] _statistics [ 146s] rpmlint.log