[ 0s] Using BUILD_ROOT=/srv/build/root_2/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_2/root [ 0s] [ 0s] [ 0s] w17 started "build _service:gbs:perl-WWW-Curl.spec" at Tue Jun 23 17:07:28 UTC 2015. [ 0s] [ 0s] Building perl-WWW-Curl for project 'Tizen:3.0.2015.Q2:Common' repository 'arm-wayland' arch 'armv7l' srcmd5 '1e9065750c685e7fda9c8a3aad297fd8' [ 0s] [ 0s] processing specfile /srv/build/root_2/.build-srcdir/_service:gbs:perl-WWW-Curl.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_2/.build-srcdir/_service:gbs:perl-WWW-Curl.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_2/.build.rpmlist /srv/build/root_2/.build-srcdir/_service:gbs:perl-WWW-Curl.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 0s] [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/39] preinstalling libmagic-data... [ 0s] [2/39] preinstalling setup... [ 0s] [3/39] preinstalling filesystem... [ 0s] [4/39] preinstalling glibc... [ 0s] [5/39] preinstalling libgcc_s1... [ 0s] [6/39] preinstalling bash... [ 0s] [7/39] preinstalling diffutils... [ 1s] [8/39] preinstalling libattr... [ 1s] [9/39] preinstalling libbz2... [ 1s] [10/39] preinstalling libelf... [ 1s] [11/39] preinstalling libfreebl3... [ 1s] [12/39] preinstalling liblua... [ 1s] [13/39] preinstalling liblzma... [ 1s] [14/39] preinstalling libncurses... [ 1s] [15/39] preinstalling libpopt... [ 1s] [16/39] preinstalling libsmack... [ 1s] [17/39] preinstalling libsqlite... [ 1s] [18/39] preinstalling libuuid... [ 1s] [19/39] preinstalling nspr... [ 1s] [20/39] preinstalling sed... [ 1s] [21/39] preinstalling tar... [ 1s] [22/39] preinstalling zlib... [ 1s] [23/39] preinstalling qemu-accel-armv7l-cross-arm... [ 5s] [24/39] preinstalling qemu-linux-user-cross-arm... [ 5s] [25/39] preinstalling grep... [ 5s] [26/39] preinstalling libacl... [ 5s] [27/39] preinstalling libblkid... [ 5s] [28/39] preinstalling libcap... [ 5s] [29/39] preinstalling libreadline... [ 5s] [30/39] preinstalling smack... [ 5s] [31/39] preinstalling bzip2... [ 5s] [32/39] preinstalling libmagic... [ 6s] [33/39] preinstalling libxml2... [ 6s] [34/39] preinstalling libmount... [ 6s] [35/39] preinstalling coreutils... [ 6s] [36/39] preinstalling util-linux... [ 6s] [37/39] preinstalling nss... [ 6s] [38/39] preinstalling libsoftokn3... [ 6s] [39/39] preinstalling rpm... [ 6s] [ 6s] [1/9] preinstalling libext2fs... [ 6s] [2/9] preinstalling libpcre... [ 6s] [3/9] preinstalling libsmartcols... [ 6s] [4/9] preinstalling libuuid... [ 6s] [5/9] preinstalling perl... [ 7s] [6/9] preinstalling grep... [ 7s] [7/9] preinstalling libblkid... [ 7s] [8/9] preinstalling libmount... [ 7s] [9/9] preinstalling util-linux... [ 7s] copying packages... [ 8s] reordering...cycle: gcc49-locale -> gcc49 [ 8s] breaking dependency gcc49 -> gcc49-locale [ 8s] cycle: coreutils -> pam [ 8s] breaking dependency pam -> coreutils [ 8s] cycle: nss -> libsoftokn3 [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] done [ 9s] booting kvm ... [ 9s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 8000 -drive file=/srv/build/root_2/root,if=virtio,cache=none -drive file=/srv/build/root_2/root,if=ide,index=0,cache=none -drive file=/srv/build/root_2/swap,if=virtio,cache=none -smp 4 [ 12s] doing fast boot [ 12s] Creating device nodes with udev [ 12s] Waiting for device /dev/vda to appear: ok [ 12s] fsck from util-linux 2.21.2 [ 12s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 12s] /dev/vda: clean, 4722/2392064 files, 263209/9568256 blocks [ 12s] fsck succeeded. Mounting root device read-write. [ 12s] Mounting root /dev/vda [ 12s] mount -o rw -t ext4 /dev/vda /root [ 12s] replacing /etc/mtab with symlink to /proc/self/mounts [ 13s] 2nd stage started in virtual machine [ 13s] machine type: armv7l [ 13s] swapon /dev/vdb [ 13s] swapon: /dev/vdb: found swap signature: version 1d, page-size 4, same byte order [ 13s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 13s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 13s] mount: none is already mounted or /proc busy [ 13s] mount: none is already mounted or /dev/pts busy [ 13s] logging output to //.build.log... [ 13s] processing specfile /.build-srcdir/_service:gbs:perl-WWW-Curl.spec ... [ 13s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:perl-WWW-Curl.spec build rpmlint-Factory ... [ 13s] running qemu-accel-armv7l-cross-arm postinstall script [ 13s] ++ uname -m [ 13s] + '[' armv7l = armv7l ']' [ 13s] + builtin echo armv7l arch [ 13s] armv7l arch [ 13s] + ln -sf /emul/i586-for-arm/lib/libnsl.so.1 /lib/libnsl.so.1 [ 13s] + /usr/sbin/ldconfig [ 13s] + '[' '!' -d /proc/sys/fs/binfmt_misc ']' [ 13s] + did_mount_it= [ 13s] + '[' '!' -f /proc/sys/fs/binfmt_misc/register ']' [ 13s] + '[' -e /proc/sys/fs/binfmt_misc/arm ']' [ 13s] + builtin echo Registering accelerated handler [ 13s] Registering accelerated handler [ 13s] + builtin echo -1 [ 13s] + builtin echo ':arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/qemu/qemu-arm-binfmt:P' [ 13s] + '[' ']' [ 13s] + ls /qemu [ 13s] + read f [ 13s] + '[' -f /usr/bin/qemu-arm ']' [ 13s] + builtin echo /usr/bin/qemu-arm already 'presents!' [ 13s] /usr/bin/qemu-arm already presents! [ 13s] + read f [ 13s] + '[' -f /usr/bin/qemu-arm-binfmt ']' [ 13s] + builtin echo /usr/bin/qemu-arm-binfmt already 'presents!' [ 13s] /usr/bin/qemu-arm-binfmt already presents! [ 13s] + read f [ 13s] + builtin echo All done [ 13s] All done [ 13s] + rm -rf /usr/armv7l-tizen-linux-gnueabi/lib [ 13s] + ln -s /lib /usr/armv7l-tizen-linux-gnueabi/usr/lib [ 13s] + builtin echo 0 [ 13s] + '[' -f /usr/bin/gcc ']' [ 13s] ++ echo -n i686 [ 13s] ++ sed -e s/i.86/i586/ [ 13s] + HOST_ARCH=i586 [ 13s] + ACCEL_DIR=/emul/i586-for-arm [ 13s] + mkdir -p /usr/bin/../lib/bfd-plugins [ 13s] + /usr/sbin/update-alternatives --install /usr/bin/../lib/bfd-plugins/liblto_plugin_i386.so liblto_plugin_i386.so /emul/i586-for-arm/usr/lib/gcc/armv7l-tizen-linux-gnueabi//liblto_plugin.so 3 [ 13s] .init_b_cache/scripts/qemu-accel-armv7l-cross-arm.post: line 59: /usr/sbin/update-alternatives: No such file or directory [ 13s] running setup postinstall script [ 13s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 13s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 13s] initializing rpm db... [ 14s] [1/114] installing libmagic-data-5.18-8.4 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [2/114] installing libstdc++-locale-4.9.2-12.2 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [3/114] installing setup-0.9-10.3 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [4/114] installing terminfo-base-5.9-6.4 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [5/114] installing filesystem-3.1-11.1 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [6/114] installing glibc-2.21-8.21 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [7/114] installing libatomic-4.9.2-12.2 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [8/114] installing libgcc_s1-4.9.2-12.2 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [9/114] installing libgomp-4.9.2-12.2 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [10/114] installing bash-4.3.30-16.6 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [11/114] installing cpio-2.11-7.3 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [12/114] installing diffutils-3.3-7.3 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [13/114] installing findutils-4.5.14-7.4 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [14/114] installing gawk-4.1.1-7.3 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [15/114] installing hostname-3.12-6.3 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [16/114] installing libattr-2.4.47-8.4 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [17/114] installing libbz2-1.0.6-6.15 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [18/114] installing libcares-1.10.0-8.3 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [19/114] installing libelf-0.160-7.6 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [20/114] installing libext2fs-1.42.11-9.3 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [21/114] installing libfreebl3-3.17.2-12.30 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [22/114] installing libgdbm-1.11-8.7 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [23/114] installing libgmp-6.0.0-7.5 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [24/114] installing libitm-4.9.2-12.2 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [25/114] installing libltdl-2.4.2-6.5 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [26/114] installing liblua-5.1.4-8.5 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [27/114] installing liblzma-5.1.3-7.5 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [28/114] installing libpcre-8.31-5.3 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [29/114] installing libpopt-1.16-5.5 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [30/114] installing libsmack-1.1.0-11.4 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [31/114] installing libsmartcols-2.25.2-10.5 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [32/114] installing libsqlite-3.7.14-10.4 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [33/114] installing libuuid-2.25.2-10.5 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [34/114] installing m4-1.4.17-7.3 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [35/114] installing net-tools-2.0_20121208git-5.4 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [36/114] installing nspr-4.10.7-8.8 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [37/114] installing patch-2.7-5.4 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [38/114] installing pkg-config-0.28-6.4 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [39/114] installing sed-4.2.2-7.3 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [40/114] installing tar-1.27-5.3 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [41/114] installing update-alternatives-1.16.3-7.3 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [42/114] installing which-2.20-5.3 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [43/114] installing zlib-1.2.8-7.5 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [44/114] installing libncurses-5.9-6.4 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [45/114] installing libstdc++-4.9.2-12.2 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [46/114] installing build-compare-2015.04.28-10.6 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [47/114] installing gcc49-info-4.9.2-12.2 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [48/114] installing qemu-linux-user-cross-arm-2.2.0-9.7 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [49/114] installing db4-4.8.30.NC-6.7 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [50/114] installing less-466-7.3 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [51/114] installing libacl-2.2.52-8.4 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [52/114] installing libasan-4.9.2-12.2 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [53/114] installing libasm-0.160-7.6 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [54/114] installing libblkid-2.25.2-10.5 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [55/114] installing libcap-2.24-7.13 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [56/114] installing libidn-1.25-6.3 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [57/114] installing libmpfr-3.1.2-7.5 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [58/114] installing libopenssl-1.0.1l-10.7 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [59/114] installing libreadline-5.2-6.3 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [60/114] installing libubsan-4.9.2-12.2 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [61/114] installing make-4.0-8.4 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [62/114] installing nss-certs-3.17.2-12.30 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [63/114] installing smack-1.1.0-11.4 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [64/114] installing bzip2-1.0.6-6.15 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [65/114] installing grep-2.19-7.3 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [66/114] installing libmagic-5.18-8.4 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [67/114] installing libxml2-2.8.0-8.4 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [68/114] installing xz-5.1.3-7.5 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [69/114] installing binutils-2.25-15.2 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] update-alternatives: using /usr/bin/ld.bfd to provide /usr/bin/ld (ld) in auto mode. [ 21s] [70/114] installing libdw-0.160-7.6 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [71/114] installing binutils-gold-2.25-15.2 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] update-alternatives: using /usr/bin/ld.gold to provide /usr/bin/ld (ld) in auto mode. [ 21s] [72/114] installing file-5.18-8.4 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [73/114] installing libmount-2.25.2-10.5 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [74/114] installing libmpc-1.0-5.6 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] [75/114] installing openssl-1.0.1l-10.7 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] [76/114] installing libcurl-7.37.1-8.2 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] [77/114] installing perl-5.20.0-7.9 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [78/114] installing elfutils-0.160-7.6 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [79/114] installing build-mkbaselibs-20120927-8.1 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [80/114] installing perl-Devel-Symdump-2.08-5.1 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [81/114] installing autoconf-2.69-7.1 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [82/114] installing cpp49-4.9.2-12.2 [ 24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 24s] [83/114] installing cpp-4.9-8.1 [ 24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 24s] [84/114] installing perl-Pod-Coverage-0.22-6.1 [ 24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 24s] [85/114] installing build-20120927-8.1 [ 24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 24s] [86/114] installing perl-Test-Pod-Coverage-1.08-6.1 [ 24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 24s] [87/114] installing pam-1.1.6-8.5 [ 24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 24s] [88/114] installing nss-3.17.2-12.30 [ 24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 24s] [89/114] installing libsoftokn3-3.17.2-12.30 [ 24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 24s] [90/114] installing coreutils-8.21-9.4 [ 24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 24s] [91/114] installing util-linux-2.25.2-10.5 [ 25s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 25s] [92/114] installing rpm-4.11.0.1-29.5 [ 25s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 25s] [93/114] installing linux-glibc-devel-3.10-7.1 [ 25s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 25s] [94/114] installing glibc-locale-2.21-8.21 [ 26s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 26s] [95/114] installing automake-1.14.1-7.2 [ 26s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 26s] [96/114] installing gzip-1.6-6.4 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [97/114] installing tzdata-2014h-7.3 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [98/114] installing rpmlint-mini-1.5-10.2 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [99/114] installing rpmlint-tizen-1.0-5.1 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [100/114] installing glibc-devel-2.21-8.21 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [101/114] installing libtool-2.4.2-6.5 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [102/114] installing libstdc++49-devel-4.9.2-12.2 [ 28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] [103/114] installing libcares-devel-1.10.0-8.3 [ 28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] [104/114] installing libidn-devel-1.25-6.3 [ 28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] [105/114] installing zlib-devel-1.2.8-7.5 [ 28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] [106/114] installing gcc49-4.9.2-12.2 [ 29s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 29s] [107/114] installing gcc49-locale-4.9.2-12.2 [ 29s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 29s] [108/114] installing gcc-4.9-8.1 [ 29s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 29s] [109/114] installing libcurl-devel-7.37.1-8.2 [ 29s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 29s] [110/114] installing libopenssl-devel-1.0.1l-10.7 [ 29s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 29s] [111/114] installing gcc49-c++-4.9.2-12.2 [ 29s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 29s] [112/114] installing gcc-c++-4.9-8.1 [ 29s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 29s] [113/114] installing qemu-accel-armv7l-cross-arm-0.4-18.5 [ 35s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 35s] ++ uname -m [ 35s] + '[' armv7l = armv7l ']' [ 35s] + builtin echo armv7l arch [ 35s] armv7l arch [ 35s] + ln -sf /emul/i586-for-arm/lib/libnsl.so.1 /lib/libnsl.so.1 [ 35s] + /usr/sbin/ldconfig [ 35s] + '[' '!' -d /proc/sys/fs/binfmt_misc ']' [ 35s] + did_mount_it= [ 35s] + '[' '!' -f /proc/sys/fs/binfmt_misc/register ']' [ 35s] + '[' -e /proc/sys/fs/binfmt_misc/arm ']' [ 35s] + builtin echo Registering accelerated handler [ 35s] Registering accelerated handler [ 35s] + builtin echo -1 [ 35s] + builtin echo ':arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/qemu/qemu-arm-binfmt:P' [ 35s] + '[' ']' [ 35s] + ls /qemu [ 35s] + read f [ 35s] + '[' -f /usr/bin/qemu-arm ']' [ 35s] + builtin echo /usr/bin/qemu-arm already 'presents!' [ 35s] /usr/bin/qemu-arm already presents! [ 35s] + read f [ 35s] + '[' -f /usr/bin/qemu-arm-binfmt ']' [ 35s] + builtin echo /usr/bin/qemu-arm-binfmt already 'presents!' [ 35s] /usr/bin/qemu-arm-binfmt already presents! [ 35s] + read f [ 35s] + builtin echo All done [ 35s] All done [ 35s] + rm -rf /usr/armv7l-tizen-linux-gnueabi/lib [ 35s] + ln -s /lib /usr/armv7l-tizen-linux-gnueabi/usr/lib [ 35s] ln: failed to create symbolic link '/usr/armv7l-tizen-linux-gnueabi/usr/lib/lib': File exists [ 35s] + builtin echo 0 [ 35s] + '[' -f /usr/bin/gcc ']' [ 35s] ++ LANG=C [ 35s] ++ gcc --version [ 35s] ++ head -1 [ 35s] ++ sed -e 's/^.*gcc[^0-9]*\(\([0-9]*\.\)\+[0-9]*\).*$/\1/' [ 35s] + export GCCVER=4.9.2 [ 35s] + GCCVER=4.9.2 [ 35s] + for f in crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o [ 35s] + ln -s /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/crtbegin.o /usr/armv7l-tizen-linux-gnueabi/bin/crtbegin.o [ 35s] + for f in crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o [ 35s] + ln -s /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/crtbeginS.o /usr/armv7l-tizen-linux-gnueabi/bin/crtbeginS.o [ 35s] + for f in crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o [ 35s] + ln -s /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/crtbeginT.o /usr/armv7l-tizen-linux-gnueabi/bin/crtbeginT.o [ 35s] + for f in crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o [ 35s] + ln -s /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/crtend.o /usr/armv7l-tizen-linux-gnueabi/bin/crtend.o [ 35s] + for f in crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o [ 35s] + ln -s /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/crtendS.o /usr/armv7l-tizen-linux-gnueabi/bin/crtendS.o [ 35s] ++ echo -n i686 [ 35s] ++ sed -e s/i.86/i586/ [ 35s] + HOST_ARCH=i586 [ 35s] + ACCEL_DIR=/emul/i586-for-arm [ 35s] + mkdir -p /usr/bin/../lib/bfd-plugins [ 35s] + /usr/sbin/update-alternatives --install /usr/bin/../lib/bfd-plugins/liblto_plugin_i386.so liblto_plugin_i386.so /emul/i586-for-arm/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/liblto_plugin.so 3 [ 35s] update-alternatives: error: alternative path /emul/i586-for-arm/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/liblto_plugin.so doesn't exist. [ 35s] warning: %post(qemu-accel-armv7l-cross-arm-0.4-18.5.armv7l) scriptlet failed, exit status 2 [ 35s] [114/114] installing rpm-build-4.11.0.1-29.5 [ 35s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 35s] removing nis flags from //etc/nsswitch.conf... [ 35s] now finalizing build dir... [ 35s] qemu: Unsupported syscall: 311 [ 37s] Warning: spec file parser line 24: can't expand %(...) [ 37s] Warning: spec file parser line 30: can't expand %(...) [ 40s] build target is armv7l-tizen-linux [ 40s] ----------------------------------------------------------------- [ 40s] I have the following modifications for perl-WWW-Curl.spec: [ 40s] 18c18 [ 40s] < release: 4.1 [ 40s] --- [ 40s] > release: 5.2 [ 40s] ----------------------------------------------------------------- [ 40s] ----- building perl-WWW-Curl.spec (user abuild) [ 40s] ----------------------------------------------------------------- [ 40s] ----------------------------------------------------------------- [ 40s] qemu: Unsupported syscall: 311 [ 40s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0.2015.Q2:Common/arm-wayland/1e9065750c685e7fda9c8a3aad297fd8-perl-WWW-Curl' /home/abuild/rpmbuild/SOURCES/perl-WWW-Curl.spec [ 40s] Building target platforms: armv7l-tizen-linux [ 40s] Building for target armv7l-tizen-linux [ 40s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.UNj5J2 [ 40s] + umask 022 [ 40s] + cd /home/abuild/rpmbuild/BUILD [ 40s] + cd /home/abuild/rpmbuild/BUILD [ 40s] + rm -rf perl-WWW-Curl-4.05 [ 40s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/perl-WWW-Curl-4.05.tar.bz2 [ 40s] + /bin/tar -xvvf - [ 40s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/ [ 40s] -rw-rw-r-- root/root 11915 2013-07-01 18:58 perl-WWW-Curl-4.05/Changes [ 40s] -rw-rw-r-- root/root 31779 2013-07-01 18:58 perl-WWW-Curl-4.05/Curl.xs [ 40s] -rw-rw-r-- root/root 255 2013-07-01 18:58 perl-WWW-Curl-4.05/LICENSE [ 40s] -rw-rw-r-- root/root 963 2013-07-01 18:58 perl-WWW-Curl-4.05/MANIFEST [ 40s] -rw-rw-r-- root/root 487 2013-07-01 18:58 perl-WWW-Curl-4.05/META.yml [ 40s] -rw-rw-r-- root/root 8543 2013-07-01 18:58 perl-WWW-Curl-4.05/Makefile.PL [ 40s] -rw-rw-r-- root/root 2475 2013-07-01 18:58 perl-WWW-Curl-4.05/README [ 40s] -rw-rw-r-- root/root 673 2013-07-01 18:58 perl-WWW-Curl-4.05/README.Win32 [ 40s] -rw-rw-r-- root/root 4168 2013-07-01 18:58 perl-WWW-Curl-4.05/SIGNATURE [ 40s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/ [ 40s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/ [ 40s] -rw-rw-r-- root/root 8549 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install.pm [ 40s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install/ [ 40s] -rw-rw-r-- root/root 1053 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install/Base.pm [ 40s] -rw-rw-r-- root/root 1788 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install/Can.pm [ 40s] -rw-rw-r-- root/root 1530 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install/External.pm [ 40s] -rw-rw-r-- root/root 1094 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install/MakeMaker.pm [ 40s] -rw-rw-r-- root/root 6225 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install/Makefile.pm [ 40s] -rw-rw-r-- root/root 9448 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install/Metadata.pm [ 40s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/ [ 40s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/WWW/ [ 40s] -rw-rw-r-- root/root 10200 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/WWW/Curl.pm [ 40s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/WWW/Curl/ [ 40s] -rw-rw-r-- root/root 5242 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/WWW/Curl/Easy.pm [ 40s] -rw-rw-r-- root/root 187 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/WWW/Curl/Form.pm [ 40s] -rw-rw-r-- root/root 367 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/WWW/Curl/Multi.pm [ 40s] -rw-rw-r-- root/root 1018 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/WWW/Curl/Share.pm [ 40s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/packaging/ [ 40s] -rw-rw-r-- root/root 69 2013-07-01 18:58 perl-WWW-Curl-4.05/packaging/perl-WWW-Curl.manifest [ 40s] -rw-rw-r-- root/root 3997 2013-07-01 18:58 perl-WWW-Curl-4.05/packaging/perl-WWW-Curl.spec [ 40s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/t/ [ 40s] -rw-rw-r-- root/root 152 2013-07-01 18:58 perl-WWW-Curl-4.05/t/00constants.t [ 40s] -rw-rw-r-- root/root 1630 2013-07-01 18:58 perl-WWW-Curl-4.05/t/01basic.t [ 40s] -rw-rw-r-- root/root 1192 2013-07-01 18:58 perl-WWW-Curl-4.05/t/02callbacks.t [ 40s] -rw-rw-r-- root/root 1049 2013-07-01 18:58 perl-WWW-Curl-4.05/t/04abort-test.t [ 40s] -rw-rw-r-- root/root 1716 2013-07-01 18:58 perl-WWW-Curl-4.05/t/05progress.t [ 40s] -rw-rw-r-- root/root 1827 2013-07-01 18:58 perl-WWW-Curl-4.05/t/06http-post.t [ 40s] -rw-rw-r-- root/root 2103 2013-07-01 18:58 perl-WWW-Curl-4.05/t/07ftp-upload.t [ 40s] -rw-rw-r-- root/root 3243 2013-07-01 18:58 perl-WWW-Curl-4.05/t/08ssl.t [ 40s] -rw-rw-r-- root/root 1978 2013-07-01 18:58 perl-WWW-Curl-4.05/t/09times.t [ 40s] -rw-rw-r-- root/root 1284 2013-07-01 18:58 perl-WWW-Curl-4.05/t/10errbuf.t [ 40s] -rw-rw-r-- root/root 1133 2013-07-01 18:58 perl-WWW-Curl-4.05/t/13slowleak.t [ 40s] -rw-rw-r-- root/root 2178 2013-07-01 18:58 perl-WWW-Curl-4.05/t/14duphandle.t [ 40s] -rw-rw-r-- root/root 3153 2013-07-01 18:58 perl-WWW-Curl-4.05/t/15duphandle-callback.t [ 40s] -rw-rw-r-- root/root 2043 2013-07-01 18:58 perl-WWW-Curl-4.05/t/16formpost.t [ 40s] -rw-rw-r-- root/root 2236 2013-07-01 18:58 perl-WWW-Curl-4.05/t/17slist.t [ 40s] -rw-rw-r-- root/root 1547 2013-07-01 18:58 perl-WWW-Curl-4.05/t/18twinhandles.t [ 40s] -rw-rw-r-- root/root 134 2013-07-01 18:58 perl-WWW-Curl-4.05/t/meta.t [ 40s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/ [ 40s] -rw-rw-r-- root/root 95 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/00constants.t [ 40s] -rw-rw-r-- root/root 407 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/01basic.t [ 40s] -rw-rw-r-- root/root 456 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/02header-callback.t [ 40s] -rw-rw-r-- root/root 454 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/03body-callback.t [ 40s] -rw-rw-r-- root/root 422 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/04abort.t [ 40s] -rw-rw-r-- root/root 668 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/05progress.t [ 40s] -rw-rw-r-- root/root 727 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/06http-post.t [ 40s] -rw-rw-r-- root/root 205 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/07errbuf.t [ 40s] -rw-rw-r-- root/root 443 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/08duphandle.t [ 40s] -rw-rw-r-- root/root 489 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/09duphandle-callback.t [ 40s] -rw-rw-r-- root/root 1269 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/10multi-callback.t [ 40s] -rw-rw-r-- root/root 381 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/README [ 40s] -rw-rw-r-- root/root 232 2013-07-01 18:58 perl-WWW-Curl-4.05/t/pod-coverage.t [ 40s] -rw-rw-r-- root/root 140 2013-07-01 18:58 perl-WWW-Curl-4.05/t/pod.t [ 40s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/template/ [ 40s] -rw-rw-r-- root/root 1095 2013-07-01 18:58 perl-WWW-Curl-4.05/template/Easy.pm.tmpl [ 40s] -rw-rw-r-- root/root 763 2013-07-01 18:58 perl-WWW-Curl-4.05/template/Share.pm.tmpl [ 40s] -rw-rw-r-- root/root 110 2013-07-01 18:58 perl-WWW-Curl-4.05/typemap [ 40s] + STATUS=0 [ 40s] + '[' 0 -ne 0 ']' [ 40s] + cd perl-WWW-Curl-4.05 [ 40s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 40s] + cp /home/abuild/rpmbuild/SOURCES/perl-WWW-Curl.manifest . [ 40s] + chmod -R u+w /home/abuild/rpmbuild/BUILD/perl-WWW-Curl-4.05 [ 40s] + exit 0 [ 40s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.otbDbV [ 40s] + umask 022 [ 40s] + cd /home/abuild/rpmbuild/BUILD [ 40s] + cd perl-WWW-Curl-4.05 [ 40s] ++ uname -m [ 40s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 40s] + LANG=C [ 40s] + export LANG [ 40s] + unset DISPLAY [ 40s] + CFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -Wp,-D__SOFTFP__ -g' [ 40s] + export CFLAGS [ 40s] + CXXFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -Wp,-D__SOFTFP__ -g' [ 40s] + export CXXFLAGS [ 40s] + FFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -Wp,-D__SOFTFP__ -g -I%_fmoddir' [ 40s] + export FFLAGS [ 40s] + LD_AS_NEEDED=1 [ 40s] + export LD_AS_NEEDED [ 40s] + grep -rsl '^#!.*perl' . [ 40s] + grep -v '.bak$' [ 40s] + xargs --no-run-if-empty /bin/perl -MExtUtils::MakeMaker -e 'MY->fixin(@ARGV)' [ 41s] + CFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -Wp,-D__SOFTFP__ -g' [ 41s] ++ /bin/perl -MExtUtils::MakeMaker -e ' print qq|PREFIX=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr| if $ExtUtils::MakeMaker::VERSION =~ /5\.9[1-6]|6\.0[0-5]/ ' [ 42s] + /bin/perl Makefile.PL [ 43s] Locating required external dependency bin:curl-config... found at /bin/curl-config. [ 43s] Found curl.h in /usr/include/curl/curl.h [ 43s] Building curlopt-constants.c for your libcurl version [ 43s] Building Easy.pm constants for your libcurl version [ 43s] Building Share.pm constants for your libcurl version [ 44s] Checking if your kit is complete... [ 44s] Looks good [ 45s] Generating a Unix-style Makefile [ 45s] Writing Makefile for WWW::Curl [ 45s] Writing MYMETA.yml and MYMETA.json [ 45s] + /bin/make [ 48s] cp lib/WWW/Curl/Share.pm blib/lib/WWW/Curl/Share.pm [ 48s] AutoSplitting blib/lib/WWW/Curl/Share.pm (blib/lib/auto/WWW/Curl/Share) [ 48s] cp lib/WWW/Curl/Form.pm blib/lib/WWW/Curl/Form.pm [ 48s] cp lib/WWW/Curl.pm blib/lib/WWW/Curl.pm [ 48s] cp lib/WWW/Curl/Multi.pm blib/lib/WWW/Curl/Multi.pm [ 48s] cp lib/WWW/Curl/Easy.pm blib/lib/WWW/Curl/Easy.pm [ 48s] AutoSplitting blib/lib/WWW/Curl/Easy.pm (blib/lib/auto/WWW/Curl/Easy) [ 48s] Running Mkbootstrap for WWW::Curl () [ 49s] chmod 644 Curl.bs [ 49s] /usr/bin/perl "-Iinc" /usr/lib/perl5/5.20.0/ExtUtils/xsubpp -typemap /usr/lib/perl5/5.20.0/ExtUtils/typemap -typemap typemap Curl.xs > Curl.xsc && mv Curl.xsc Curl.c [ 50s] cc -c -I/usr/include -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -Wp,-D__SOFTFP__ -g -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -Wp,-D__SOFTFP__ -g -Wall -pipe -DVERSION=\"4.05\" -DXS_VERSION=\"4.05\" -fPIC "-I/usr/lib/perl5/5.20.0/armv7l-linux-thread-multi/CORE" Curl.c [ 50s] Curl.xs: In function 'fwrite_wrapper2': [ 50s] Curl.xs:341:13: warning: unused variable 'sv' [-Wunused-variable] [ 50s] SV *sv; [ 50s] ^ [ 50s] In file included from Curl.xs:16:0: [ 50s] Curl.c: In function 'XS_WWW__Curl__Easy_init': [ 50s] /usr/lib/perl5/5.20.0/armv7l-linux-thread-multi/CORE/XSUB.h:183:20: warning: unused variable 'ix' [-Wunused-variable] [ 50s] #define dXSI32 I32 ix = XSANY.any_i32 [ 50s] ^ [ 50s] Curl.c:747:5: note: in expansion of macro 'dXSI32' [ 50s] dXSI32; [ 50s] ^ [ 50s] Curl.c: In function 'XS_WWW__Curl__Easy_version': [ 50s] /usr/lib/perl5/5.20.0/armv7l-linux-thread-multi/CORE/XSUB.h:164:20: warning: unused variable 'items' [-Wunused-variable] [ 50s] #define dITEMS I32 items = (I32)(SP - MARK) [ 50s] ^ [ 50s] /usr/lib/perl5/5.20.0/armv7l-linux-thread-multi/CORE/XSUB.h:172:16: note: in expansion of macro 'dITEMS' [ 50s] dSP; dAXMARK; dITEMS [ 50s] ^ [ 50s] Curl.c:865:11: note: in expansion of macro 'dXSARGS' [ 50s] dVAR; dXSARGS; [ 50s] ^ [ 50s] Curl.c: In function 'XS_WWW__Curl__Easy_internal_setopt': [ 50s] Curl.c:1064:6: warning: unused variable 'value' [-Wunused-variable] [ 50s] int value = (int)SvIV(ST(2)) [ 50s] ^ [ 50s] Curl.c:1062:6: warning: unused variable 'option' [-Wunused-variable] [ 50s] int option = (int)SvIV(ST(1)) [ 50s] ^ [ 50s] Curl.c:1061:18: warning: variable 'self' set but not used [-Wunused-but-set-variable] [ 50s] WWW__Curl__Easy self; [ 50s] ^ [ 50s] Curl.c: In function 'XS_WWW__Curl__Easy_cleanup': [ 50s] Curl.c:1220:18: warning: variable 'self' set but not used [-Wunused-but-set-variable] [ 50s] WWW__Curl__Easy self; [ 50s] ^ [ 50s] Curl.c: In function 'XS_WWW__Curl__Easy_strerror': [ 50s] Curl.c:1291:18: warning: variable 'self' set but not used [-Wunused-but-set-variable] [ 50s] WWW__Curl__Easy self; [ 50s] ^ [ 50s] Curl.c: In function 'XS_WWW__Curl__Form_add': [ 50s] Curl.c:1364:9: warning: unused variable 'value' [-Wunused-variable] [ 50s] char * value = (char *)SvPV_nolen(ST(2)) [ 50s] ^ [ 50s] Curl.c:1362:9: warning: unused variable 'name' [-Wunused-variable] [ 50s] char * name = (char *)SvPV_nolen(ST(1)) [ 50s] ^ [ 50s] Curl.c:1361:18: warning: variable 'self' set but not used [-Wunused-but-set-variable] [ 50s] WWW__Curl__Form self; [ 50s] ^ [ 50s] Curl.c: In function 'XS_WWW__Curl__Form_addfile': [ 50s] Curl.c:1401:9: warning: unused variable 'type' [-Wunused-variable] [ 50s] char * type = (char *)SvPV_nolen(ST(3)) [ 50s] ^ [ 50s] Curl.c:1399:9: warning: unused variable 'description' [-Wunused-variable] [ 50s] char * description = (char *)SvPV_nolen(ST(2)) [ 50s] ^ [ 50s] Curl.c:1397:9: warning: unused variable 'filename' [-Wunused-variable] [ 50s] char * filename = (char *)SvPV_nolen(ST(1)) [ 50s] ^ [ 50s] Curl.c:1396:18: warning: variable 'self' set but not used [-Wunused-but-set-variable] [ 50s] WWW__Curl__Form self; [ 50s] ^ [ 50s] Curl.c: In function 'XS_WWW__Curl__Multi_strerror': [ 50s] Curl.c:1706:19: warning: variable 'self' set but not used [-Wunused-but-set-variable] [ 50s] WWW__Curl__Multi self; [ 50s] ^ [ 50s] Curl.c: In function 'XS_WWW__Curl__Share_strerror': [ 50s] Curl.c:1874:19: warning: variable 'self' set but not used [-Wunused-but-set-variable] [ 50s] WWW__Curl__Share self; [ 50s] ^ [ 52s] rm -f blib/arch/auto/WWW/Curl/Curl.so [ 52s] LD_RUN_PATH="/lib" cc -shared -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -Wp,-D__SOFTFP__ -g -Wall -pipe Curl.o -o blib/arch/auto/WWW/Curl/Curl.so \ [ 52s] -lcurl -lcares -lidn -lssl -lcrypto -lssl -lcrypto -lz \ [ 52s] [ 52s] chmod 755 blib/arch/auto/WWW/Curl/Curl.so [ 52s] /usr/bin/perl "-Iinc" -MExtUtils::Command::MM -e 'cp_nonempty' -- Curl.bs blib/arch/auto/WWW/Curl/Curl.bs 644 [ 53s] Manifying blib/man3/WWW::Curl.3pm [ 53s] + exit 0 [ 53s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.6chZby [ 53s] + umask 022 [ 53s] + cd /home/abuild/rpmbuild/BUILD [ 53s] + cd perl-WWW-Curl-4.05 [ 53s] + LANG=C [ 53s] + export LANG [ 53s] + unset DISPLAY [ 53s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm [ 53s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm [ 53s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm '!=' / ']' [ 53s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm [ 53s] ++ /bin/perl -MExtUtils::MakeMaker -e ' print $ExtUtils::MakeMaker::VERSION <= 6.05 ? qq|PREFIX=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr| : qq|DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm| ' [ 53s] + /bin/make prefix=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr exec_prefix=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr bindir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/bin sbindir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/sbin sysconfdir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/etc datadir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/share includedir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/include libdir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/lib libexecdir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/libexec localstatedir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/var sharedstatedir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/com mandir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/share/man infodir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/share/info install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm [ 54s] Running Mkbootstrap for WWW::Curl () [ 54s] chmod 644 Curl.bs [ 55s] Files found in blib/arch: installing files in blib/lib into architecture dependent library tree [ 55s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Curl.so [ 55s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl.pm [ 55s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Form.pm [ 55s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Share.pm [ 55s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Multi.pm [ 55s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Easy.pm [ 55s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Share/autosplit.ix [ 55s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Easy/autosplit.ix [ 55s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/share/man/man3/WWW::Curl.3pm [ 55s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/lib/perl5/5.20.0/armv7l-linux-thread-multi/perllocal.pod [ 56s] + cmd=/usr/share/spec-helper/compress_files [ 56s] + '[' -x /usr/share/spec-helper/compress_files ']' [ 56s] + cmd=/usr/lib/rpm/brp-compress [ 56s] + '[' -x /usr/lib/rpm/brp-compress ']' [ 56s] + /usr/lib/rpm/brp-compress [ 56s] + '[' -e /etc/SuSE-release -o -e /etc/UnitedLinux-release ']' [ 56s] + find /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm -name perllocal.pod -o -name .packlist -o -name '*.bs' [ 56s] + xargs -i rm -f '{}' [ 56s] + find /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr -type d -depth -exec rmdir '{}' ';' [ 56s] + /bin/perl -MFile::Find -le ' [ 56s] find({ wanted => \&wanted, no_chdir => 1}, "/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm"); [ 56s] print "%doc README.Win32 template inc Changes README LICENSE"; [ 56s] for my $x (sort @dirs, @files) { [ 56s] push @ret, $x unless indirs($x); [ 56s] } [ 56s] print join "\n", sort @ret; [ 56s] [ 56s] sub wanted { [ 56s] return if /auto$/; [ 56s] [ 56s] local $_ = $File::Find::name; [ 56s] my $f = $_; s|^\Q/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm\E||; [ 56s] return unless length; [ 56s] return $files[@files] = $_ if -f $f; [ 56s] [ 56s] $d = $_; [ 56s] /\Q$d\E/ && return for reverse sort @INC; [ 56s] $d =~ /\Q$_\E/ && return [ 56s] for qw|/etc /usr/man /usr/bin /usr/share|; [ 56s] [ 56s] $dirs[@dirs] = $_; [ 56s] } [ 56s] [ 56s] sub indirs { [ 56s] my $x = shift; [ 56s] $x =~ /^\Q$_\E\// && $x ne $_ && return 1 for @dirs; [ 56s] } [ 56s] ' [ 56s] + '[' -z WWW-Curl-4.05-filelist ']' [ 56s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/perl-WWW-Curl-4.05 [ 56s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Curl.so [ 57s] cpio: gcc-4.9.2/libgcc/config/arm/lib1funcs.S: Cannot stat: No such file or directory [ 57s] cpio: gcc-4.9.2/obj-armv7l-tizen-linux-gnueabi/armv7l-tizen-linux-gnueabi/libgcc: Cannot stat: No such file or directory [ 57s] cpio: glibc-2.21/csu: Cannot stat: No such file or directory [ 57s] cpio: glibc-2.21/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 57s] cpio: glibc-2.21/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 57s] 217 blocks [ 57s] + /usr/lib/rpm/brp-compress [ 57s] + /usr/lib/rpm/brp-tizen [ 57s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm [ 57s] Processing files: perl-WWW-Curl-4.05-5.2.armv7l [ 57s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 57s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 57s] [ 57s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.O1o43q [ 57s] + umask 022 [ 57s] + cd /home/abuild/rpmbuild/BUILD [ 57s] + cd perl-WWW-Curl-4.05 [ 57s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/share/doc/packages/perl-WWW-Curl [ 57s] + export DOCDIR [ 57s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/share/doc/packages/perl-WWW-Curl [ 57s] + cp -pr README.Win32 /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/share/doc/packages/perl-WWW-Curl [ 57s] + cp -pr template /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/share/doc/packages/perl-WWW-Curl [ 57s] + cp -pr inc /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/share/doc/packages/perl-WWW-Curl [ 57s] + cp -pr Changes /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/share/doc/packages/perl-WWW-Curl [ 57s] + cp -pr README /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/share/doc/packages/perl-WWW-Curl [ 57s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/share/doc/packages/perl-WWW-Curl [ 57s] + exit 0 [ 58s] Provides: Curl.so perl(Module::Install) = 0.75 perl(Module::Install::Base) = 0.75 perl(Module::Install::Base::FakeAdmin) perl(Module::Install::Can) = 0.75 perl(Module::Install::External) = 0.75 perl(Module::Install::MakeMaker) = 0.75 perl(Module::Install::Makefile) = 0.75 perl(Module::Install::Metadata) = 0.75 perl(WWW::Curl) = 4.05 perl(WWW::Curl::Easy) = 4.05 perl(WWW::Curl::Form) perl(WWW::Curl::Multi) perl(WWW::Curl::Share) perl-WWW-Curl = 4.05-5.2 perl-WWW-Curl(armv7l-32) = 4.05-5.2 [ 58s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 58s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libcares.so.2 libcrypto.so.1.0.0 libcurl.so.4 libcurl.so.4(CURL_OPENSSL_4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libidn.so.11 libssl.so.1.0.0 libz.so.1 [ 58s] Processing files: perl-WWW-Curl-debugsource-4.05-5.2.armv7l [ 58s] Provides: perl-WWW-Curl-debugsource = 4.05-5.2 perl-WWW-Curl-debugsource(armv7l-32) = 4.05-5.2 [ 58s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 58s] Processing files: perl-WWW-Curl-debuginfo-4.05-5.2.armv7l [ 58s] Provides: debuginfo(build-id) = 7a5e21964f76e22f3754bc7e690557cb8b270b20 [ 58s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 58s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm [ 58s] warning: Could not canonicalize hostname: w17 [ 58s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-WWW-Curl-4.05-5.2.src.rpm [ 58s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-WWW-Curl-4.05-5.2.armv7l.rpm [ 59s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-WWW-Curl-debugsource-4.05-5.2.armv7l.rpm [ 59s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-WWW-Curl-debuginfo-4.05-5.2.armv7l.rpm [ 59s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.IFY3ll [ 59s] + umask 022 [ 59s] + cd /home/abuild/rpmbuild/BUILD [ 59s] + cd perl-WWW-Curl-4.05 [ 59s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm [ 59s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm '!=' / ']' [ 59s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm [ 59s] + exit 0 [ 59s] ... checking for files with abuild user/group [ 59s] [ 59s] RPMLINT report: [ 59s] =============== [ 59s] qemu: Unsupported syscall: 311 [ 65s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl.pm is not allowed in Tizen [ 65s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Share is not allowed in Tizen [ 65s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Curl.so is not allowed in Tizen [ 65s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Form.pm is not allowed in Tizen [ 65s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl is not allowed in Tizen [ 65s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Easy is not allowed in Tizen [ 65s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Multi.pm is not allowed in Tizen [ 65s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Easy/autosplit.ix is not allowed in Tizen [ 65s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl is not allowed in Tizen [ 65s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW is not allowed in Tizen [ 65s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Easy.pm is not allowed in Tizen [ 65s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Share/autosplit.ix is not allowed in Tizen [ 65s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Share.pm is not allowed in Tizen [ 65s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW is not allowed in Tizen [ 65s] perl files installed a non-vendor installed path, [ 65s] which is not allowed in SUSE. [ 65s] [ 65s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl.pm [ 65s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Share [ 65s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Curl.so [ 65s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Form.pm [ 65s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl [ 65s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Easy [ 65s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Multi.pm [ 65s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Easy/autosplit.ix [ 65s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl [ 65s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW [ 65s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Easy.pm [ 65s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Share/autosplit.ix [ 65s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Share.pm [ 65s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW [ 65s] This perl module package installs files under the subdirectory site_perl, [ 65s] while they must appear under vendor_perl. [ 65s] [ 65s] perl-WWW-Curl.src:56: W: rpm-buildroot-usage %build %{__perl} Makefile.PL `%{__perl} -MExtUtils::MakeMaker -e ' print qq|PREFIX=%{buildroot}%{_prefix}| if \$ExtUtils::MakeMaker::VERSION =~ /5\.9[1-6]|6\.0[0-5]/ '` [ 65s] $RPM_BUILD_ROOT should not be touched during %build or %prep stage, as it may [ 65s] break short circuit builds. [ 65s] [ 65s] perl-WWW-Curl.armv7l: E: non-standard-group (Badness: 200) Applications/CPAN [ 65s] perl-WWW-Curl.src: E: non-standard-group (Badness: 200) Applications/CPAN [ 65s] The value of the Group tag in the package is not valid. Valid groups are [ 65s] listed here: https://wiki.tizen.org/wiki/Packaging/Guidelines#Group_Tag [ 65s] [ 65s] perl-WWW-Curl.armv7l: W: non-linux-readme /usr/share/doc/packages/perl-WWW-Curl/README.Win32 [ 65s] Your package contains a file that contains instructions for non-linux [ 65s] platforms. They're most likely unneccessary bloat, consider removing them [ 65s] from your package. [ 65s] [ 65s] perl-WWW-Curl.src:59: W: make-check-outside-check-section %{__make} test [ 65s] Make check or other automated regression test should be run in %check, as they [ 65s] can be disabled with a rpm macro for short circuiting purposes. [ 65s] [ 65s] perl-WWW-Curl.armv7l: E: license-file-in-docs (Badness: 200) /usr/share/doc/packages/perl-WWW-Curl/LICENSE [ 65s] A file whose name suggests that it contains a license is included in the [ 65s] package as a document. Such files need to be marked with %license and not with [ 65s] %doc, which will install them in a special directory seperated from the [ 65s] documentation. [ 65s] [ 65s] perl-WWW-Curl.armv7l: E: invalid-license (Badness: 200) Artistic [ 65s] perl-WWW-Curl.src: E: invalid-license (Badness: 200) Artistic [ 65s] The specified license string is not recognized. Please refer to [ 65s] http://spdx.org/licenses/ for the list of known licences and their exact [ 65s] spelling. [ 65s] [ 65s] perl-WWW-Curl.src:20: W: hardcoded-packager-tag Arix [ 65s] The Packager tag is hardcoded in your spec file. It should be removed, so as [ 65s] to use rebuilder's own defaults. [ 65s] [ 65s] perl-WWW-Curl.armv7l: W: explicit-lib-dependency libcurl [ 65s] You must let rpm find the library dependencies by itself. Do not put unneeded [ 65s] explicit Requires: tags. [ 65s] [ 65s] 2 packages and 0 specfiles checked; 5 errors, 33 warnings. [ 65s] [ 65s] ... creating baselibs [ 66s] qemu: Unsupported syscall: 311 [ 66s] ... comparing built packages with the former built [ 66s] /usr/lib/build/pkg-diff.sh [ 66s] compare /.build.oldpackages/perl-WWW-Curl-4.05-5.1.src.rpm /home/abuild/rpmbuild/SRPMS/perl-WWW-Curl-4.05-5.2.src.rpm [ 66s] comparing rpmtags [ 67s] comparing RELEASE [ 67s] comparing PROVIDES [ 67s] comparing scripts [ 67s] comparing filelist [ 67s] comparing file checksum [ 67s] RPM meta information is identical [ 67s] compare /.build.oldpackages/perl-WWW-Curl-4.05-5.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/perl-WWW-Curl-4.05-5.2.armv7l.rpm [ 67s] Comparing perl-WWW-Curl-4.05-5.1.armv7l.rpm to perl-WWW-Curl-4.05-5.2.armv7l.rpm [ 67s] comparing rpmtags [ 67s] comparing RELEASE [ 67s] comparing PROVIDES [ 67s] comparing scripts [ 67s] comparing filelist [ 67s] comparing file checksum [ 67s] creating rename script [ 68s] RPM file checksum differs. [ 68s] Extracting packages [ 68s] /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Curl.so differs in ELF section .comment [ 68s] --- /tmp/tmp.ipelL9CZvk/tmp.hUZuEDX9gj 2015-06-23 17:08:36.000000000 +0000 [ 68s] +++ /tmp/tmp.ipelL9CZvk/tmp.vlSeb8NQ7b 2015-06-23 17:08:36.000000000 +0000 [ 68s] @@ -3,4 +3,4 @@ [ 68s] [ 68s] Contents of section .comment: [ 68s] 0000 4743433a 20285469 7a656e29 20342e39 GCC: (Tizen) 4.9 [ 68s] - 0010 00 . [ 68s] + 0010 2e3200 .2. [ 68s] compare /.build.oldpackages/perl-WWW-Curl-debuginfo-4.05-5.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/perl-WWW-Curl-debuginfo-4.05-5.2.armv7l.rpm [ 68s] skipping -debuginfo package [ 68s] compare /.build.oldpackages/perl-WWW-Curl-debugsource-4.05-5.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/perl-WWW-Curl-debugsource-4.05-5.2.armv7l.rpm [ 69s] Comparing perl-WWW-Curl-debugsource-4.05-5.1.armv7l.rpm to perl-WWW-Curl-debugsource-4.05-5.2.armv7l.rpm [ 69s] comparing rpmtags [ 69s] comparing RELEASE [ 69s] comparing PROVIDES [ 69s] comparing scripts [ 69s] comparing filelist [ 69s] comparing file checksum [ 69s] creating rename script [ 69s] RPM meta information is identical [ 69s] comparing /.build.oldpackages/rpmlint.log and /home/abuild/rpmbuild/OTHER/rpmlint.log [ 69s] ... saving built statistics [ 69s] ... saving built packages [ 69s] /home/abuild/rpmbuild/RPMS/armv7l/perl-WWW-Curl-4.05-5.2.armv7l.rpm [ 69s] /home/abuild/rpmbuild/RPMS/armv7l/perl-WWW-Curl-debuginfo-4.05-5.2.armv7l.rpm [ 69s] /home/abuild/rpmbuild/RPMS/armv7l/perl-WWW-Curl-debugsource-4.05-5.2.armv7l.rpm [ 69s] /home/abuild/rpmbuild/SRPMS/perl-WWW-Curl-4.05-5.2.src.rpm [ 69s] /home/abuild/rpmbuild/OTHER/_statistics [ 69s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 69s] [ 69s] w17 finished "build perl-WWW-Curl.spec" at Tue Jun 23 17:08:37 UTC 2015. [ 69s] [ 73s] [ 61.354688] SysRq : Power Off [ 73s] [ 61.364373] Power down. [ 73s] build: extracting built packages... [ 73s] perl-WWW-Curl-4.05-5.2.armv7l.rpm [ 73s] perl-WWW-Curl-debuginfo-4.05-5.2.armv7l.rpm [ 73s] perl-WWW-Curl-debugsource-4.05-5.2.armv7l.rpm [ 73s] perl-WWW-Curl-4.05-5.2.src.rpm [ 73s] _statistics [ 73s] rpmlint.log