[ 0s] Using BUILD_ROOT=/srv/build/root_1/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_1/root [ 0s] [ 0s] [ 0s] w06 started "build _service:gbs:perl-YAML.spec" at Tue Jun 16 05:24:32 UTC 2015. [ 0s] [ 0s] Building perl-YAML for project 'Tizen:3.0.2015.Q2:Common' repository 'arm-wayland' arch 'armv7l' srcmd5 '1e47345c67f46441e1cb0510fb853747' [ 0s] [ 0s] processing specfile /srv/build/root_1/.build-srcdir/_service:gbs:perl-YAML.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_1/.build-srcdir/_service:gbs:perl-YAML.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_1/.build.rpmlist /srv/build/root_1/.build-srcdir/_service:gbs:perl-YAML.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 0s] [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/39] preinstalling libmagic-data... [ 0s] [2/39] preinstalling setup... [ 0s] [3/39] preinstalling filesystem... [ 0s] [4/39] preinstalling glibc... [ 1s] [5/39] preinstalling libgcc_s1... [ 1s] [6/39] preinstalling bash... [ 1s] [7/39] preinstalling diffutils... [ 1s] [8/39] preinstalling libattr... [ 1s] [9/39] preinstalling libbz2... [ 1s] [10/39] preinstalling libelf... [ 1s] [11/39] preinstalling libfreebl3... [ 1s] [12/39] preinstalling liblua... [ 1s] [13/39] preinstalling liblzma... [ 1s] [14/39] preinstalling libncurses... [ 1s] [15/39] preinstalling libpopt... [ 1s] [16/39] preinstalling libsmack... [ 1s] [17/39] preinstalling libsqlite... [ 1s] [18/39] preinstalling libuuid... [ 1s] [19/39] preinstalling nspr... [ 1s] [20/39] preinstalling sed... [ 1s] [21/39] preinstalling tar... [ 1s] [22/39] preinstalling zlib... [ 1s] [23/39] preinstalling qemu-accel-armv7l-cross-arm... [ 5s] [24/39] preinstalling qemu-linux-user-cross-arm... [ 5s] [25/39] preinstalling grep... [ 5s] [26/39] preinstalling libacl... [ 5s] [27/39] preinstalling libblkid... [ 5s] [28/39] preinstalling libcap... [ 5s] [29/39] preinstalling libreadline... [ 5s] [30/39] preinstalling smack... [ 5s] [31/39] preinstalling bzip2... [ 5s] [32/39] preinstalling libmagic... [ 5s] [33/39] preinstalling libxml2... [ 6s] [34/39] preinstalling libmount... [ 6s] [35/39] preinstalling coreutils... [ 6s] [36/39] preinstalling util-linux... [ 6s] [37/39] preinstalling nss... [ 6s] [38/39] preinstalling libsoftokn3... [ 6s] [39/39] preinstalling rpm... [ 6s] [ 6s] [1/9] preinstalling libext2fs... [ 6s] [2/9] preinstalling libpcre... [ 6s] [3/9] preinstalling libsmartcols... [ 6s] [4/9] preinstalling libuuid... [ 6s] [5/9] preinstalling perl... [ 7s] [6/9] preinstalling grep... [ 7s] [7/9] preinstalling libblkid... [ 7s] [8/9] preinstalling libmount... [ 7s] [9/9] preinstalling util-linux... [ 7s] copying packages... [ 7s] reordering...cycle: gcc49-locale -> gcc49 [ 7s] breaking dependency gcc49 -> gcc49-locale [ 7s] cycle: coreutils -> pam [ 7s] breaking dependency pam -> coreutils [ 7s] cycle: nss -> libsoftokn3 [ 7s] breaking dependency nss -> libsoftokn3 [ 7s] done [ 8s] booting kvm ... [ 8s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 16000 -drive file=/srv/build/root_1/root,if=virtio,cache=none -drive file=/srv/build/root_1/root,if=ide,index=0,cache=none -drive file=/srv/build/root_1/swap,if=virtio,cache=none -smp 8 [ 12s] doing fast boot [ 12s] Creating device nodes with udev [ 12s] Waiting for device /dev/vda to appear: ok [ 12s] fsck from util-linux 2.21.2 [ 12s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 12s] /dev/vda: clean, 4683/2392064 files, 255328/9568256 blocks [ 12s] fsck succeeded. Mounting root device read-write. [ 12s] Mounting root /dev/vda [ 12s] mount -o rw -t ext4 /dev/vda /root [ 12s] replacing /etc/mtab with symlink to /proc/self/mounts [ 13s] 2nd stage started in virtual machine [ 13s] machine type: armv7l [ 13s] swapon /dev/vdb [ 13s] swapon: /dev/vdb: found swap signature: version 1d, page-size 4, same byte order [ 13s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 13s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 13s] mount: none is already mounted or /proc busy [ 13s] mount: none is already mounted or /dev/pts busy [ 13s] logging output to //.build.log... [ 13s] processing specfile /.build-srcdir/_service:gbs:perl-YAML.spec ... [ 13s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:perl-YAML.spec build rpmlint-Factory ... [ 13s] running qemu-accel-armv7l-cross-arm postinstall script [ 13s] ++ uname -m [ 13s] + '[' armv7l = armv7l ']' [ 13s] + builtin echo armv7l arch [ 13s] armv7l arch [ 13s] + ln -sf /emul/i586-for-arm/lib/libnsl.so.1 /lib/libnsl.so.1 [ 13s] + /usr/sbin/ldconfig [ 13s] + '[' '!' -d /proc/sys/fs/binfmt_misc ']' [ 13s] + did_mount_it= [ 13s] + '[' '!' -f /proc/sys/fs/binfmt_misc/register ']' [ 13s] + '[' -e /proc/sys/fs/binfmt_misc/arm ']' [ 13s] + builtin echo Registering accelerated handler [ 13s] Registering accelerated handler [ 13s] + builtin echo -1 [ 13s] + builtin echo ':arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/qemu/qemu-arm-binfmt:P' [ 13s] + '[' ']' [ 13s] + ls /qemu [ 13s] + read f [ 13s] + '[' -f /usr/bin/qemu-arm ']' [ 13s] + builtin echo /usr/bin/qemu-arm already 'presents!' [ 13s] /usr/bin/qemu-arm already presents! [ 13s] + read f [ 13s] + '[' -f /usr/bin/qemu-arm-binfmt ']' [ 13s] + builtin echo /usr/bin/qemu-arm-binfmt already 'presents!' [ 13s] /usr/bin/qemu-arm-binfmt already presents! [ 13s] + read f [ 13s] + builtin echo All done [ 13s] All done [ 13s] + rm -rf /usr/armv7l-tizen-linux-gnueabi/lib [ 13s] + ln -s /lib /usr/armv7l-tizen-linux-gnueabi/usr/lib [ 13s] + builtin echo 0 [ 13s] + '[' -f /usr/bin/gcc ']' [ 13s] running setup postinstall script [ 13s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 13s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 13s] initializing rpm db... [ 14s] [1/101] installing libmagic-data-5.18-8.2 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [2/101] installing libstdc++-locale-4.9.2-10.7 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [3/101] installing setup-0.9-10.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [4/101] installing terminfo-base-5.9-6.2 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [5/101] installing filesystem-3.1-11.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [6/101] installing glibc-2.21-8.13 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [7/101] installing libatomic-4.9.2-10.7 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [8/101] installing libgcc_s1-4.9.2-10.7 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [9/101] installing libgomp-4.9.2-10.7 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [10/101] installing bash-4.3.30-16.2 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [11/101] installing cpio-2.11-7.1 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [12/101] installing diffutils-3.3-7.1 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [13/101] installing findutils-4.5.14-7.2 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [14/101] installing gawk-4.1.1-5.2 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [15/101] installing hostname-3.12-6.1 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [16/101] installing libattr-2.4.47-8.2 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [17/101] installing libbz2-1.0.6-6.7 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [18/101] installing libelf-0.160-5.20 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [19/101] installing libext2fs-1.42.11-9.1 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [20/101] installing libfreebl3-3.17.2-12.18 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [21/101] installing libgdbm-1.11-8.2 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [22/101] installing libgmp-6.0.0-7.2 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [23/101] installing libitm-4.9.2-10.7 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [24/101] installing libltdl-2.4.2-6.2 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [25/101] installing liblua-5.1.4-8.2 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [26/101] installing liblzma-5.1.3-7.2 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [27/101] installing libpcre-8.31-5.1 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [28/101] installing libpopt-1.16-5.3 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [29/101] installing libsmack-1.1.0-11.2 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [30/101] installing libsmartcols-2.25.2-10.1 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [31/101] installing libsqlite-3.7.14-10.2 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [32/101] installing libuuid-2.25.2-10.1 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [33/101] installing m4-1.4.17-7.1 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [34/101] installing net-tools-2.0_20121208git-5.2 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [35/101] installing nspr-4.10.7-8.5 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [36/101] installing patch-2.7-5.2 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [37/101] installing pkg-config-0.28-6.2 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [38/101] installing sed-4.2.2-7.1 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [39/101] installing tar-1.27-4.7 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [40/101] installing update-alternatives-1.16.3-7.1 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [41/101] installing which-2.20-5.1 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [42/101] installing zlib-1.2.8-7.2 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [43/101] installing libncurses-5.9-6.2 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [44/101] installing libstdc++-4.9.2-10.7 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [45/101] installing build-compare-2015.04.28-10.2 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [46/101] installing gcc49-info-4.9.2-10.7 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [47/101] installing qemu-linux-user-cross-arm-2.2.0-9.2 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [48/101] installing db4-4.8.30.NC-6.3 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [49/101] installing less-466-7.1 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [50/101] installing libacl-2.2.52-8.2 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [51/101] installing libasan-4.9.2-10.7 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [52/101] installing libasm-0.160-5.20 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [53/101] installing libblkid-2.25.2-10.1 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [54/101] installing libcap-2.24-7.5 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [55/101] installing libmpfr-3.1.2-7.2 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [56/101] installing libreadline-5.2-6.1 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [57/101] installing libubsan-4.9.2-10.7 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [58/101] installing make-4.0-8.1 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [59/101] installing nss-certs-3.17.2-12.18 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [60/101] installing smack-1.1.0-11.2 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [61/101] installing bzip2-1.0.6-6.7 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [62/101] installing grep-2.19-7.1 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [63/101] installing libmagic-5.18-8.2 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [64/101] installing libxml2-2.8.0-8.2 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [65/101] installing xz-5.1.3-7.2 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [66/101] installing binutils-2.25-14.6 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] update-alternatives: using /usr/bin/ld.bfd to provide /usr/bin/ld (ld) in auto mode. [ 20s] [67/101] installing libdw-0.160-5.20 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [68/101] installing binutils-gold-2.25-14.6 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] update-alternatives: using /usr/bin/ld.gold to provide /usr/bin/ld (ld) in auto mode. [ 20s] [69/101] installing file-5.18-8.2 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [70/101] installing libmount-2.25.2-10.1 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [71/101] installing libmpc-1.0-5.3 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [72/101] installing perl-5.20.0-7.4 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] [73/101] installing elfutils-0.160-5.20 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] [74/101] installing build-mkbaselibs-20120927-8.1 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] [75/101] installing autoconf-2.69-7.1 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] [76/101] installing cpp49-4.9.2-10.7 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [77/101] installing cpp-4.9-8.1 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [78/101] installing build-20120927-8.1 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [79/101] installing pam-1.1.6-8.2 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [80/101] installing nss-3.17.2-12.18 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [81/101] installing libsoftokn3-3.17.2-12.18 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [82/101] installing coreutils-8.21-7.3 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [83/101] installing util-linux-2.25.2-10.1 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [84/101] installing rpm-4.11.0.1-29.2 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [85/101] installing linux-glibc-devel-3.10-7.1 [ 24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 24s] [86/101] installing glibc-locale-2.21-8.13 [ 25s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 25s] [87/101] installing automake-1.14.1-7.2 [ 25s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 25s] [88/101] installing gzip-1.6-6.2 [ 25s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 25s] [89/101] installing tzdata-2014h-7.1 [ 25s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 25s] [90/101] installing rpmlint-mini-1.5-8.24 [ 26s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 26s] [91/101] installing rpmlint-tizen-1.0-5.1 [ 26s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 26s] [92/101] installing glibc-devel-2.21-8.13 [ 26s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 26s] [93/101] installing libtool-2.4.2-6.2 [ 26s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 26s] [94/101] installing libstdc++49-devel-4.9.2-10.7 [ 26s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 26s] [95/101] installing gcc49-4.9.2-10.7 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] update-alternatives: using /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/liblto_plugin.so to provide /usr/bin/../lib/bfd-plugins/liblto_plugin_arm.so (liblto_plugin_arm.so) in auto mode. [ 27s] [96/101] installing gcc49-locale-4.9.2-10.7 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] [97/101] installing gcc-4.9-8.1 [ 28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] [98/101] installing gcc49-c++-4.9.2-10.7 [ 28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] [99/101] installing gcc-c++-4.9-8.1 [ 28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] [100/101] installing qemu-accel-armv7l-cross-arm-0.4-15.2 [ 33s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 33s] ++ uname -m [ 33s] + '[' armv7l = armv7l ']' [ 33s] + builtin echo armv7l arch [ 33s] armv7l arch [ 33s] + ln -sf /emul/i586-for-arm/lib/libnsl.so.1 /lib/libnsl.so.1 [ 33s] + /usr/sbin/ldconfig [ 33s] + '[' '!' -d /proc/sys/fs/binfmt_misc ']' [ 33s] + did_mount_it= [ 33s] + '[' '!' -f /proc/sys/fs/binfmt_misc/register ']' [ 33s] + '[' -e /proc/sys/fs/binfmt_misc/arm ']' [ 33s] + builtin echo Registering accelerated handler [ 33s] Registering accelerated handler [ 33s] + builtin echo -1 [ 33s] + builtin echo ':arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/qemu/qemu-arm-binfmt:P' [ 33s] + '[' ']' [ 33s] + ls /qemu [ 33s] + read f [ 33s] + '[' -f /usr/bin/qemu-arm ']' [ 33s] + builtin echo /usr/bin/qemu-arm already 'presents!' [ 33s] /usr/bin/qemu-arm already presents! [ 33s] + read f [ 33s] + '[' -f /usr/bin/qemu-arm-binfmt ']' [ 33s] + builtin echo /usr/bin/qemu-arm-binfmt already 'presents!' [ 33s] /usr/bin/qemu-arm-binfmt already presents! [ 33s] + read f [ 33s] + builtin echo All done [ 33s] All done [ 33s] + rm -rf /usr/armv7l-tizen-linux-gnueabi/lib [ 33s] + ln -s /lib /usr/armv7l-tizen-linux-gnueabi/usr/lib [ 33s] ln: failed to create symbolic link '/usr/armv7l-tizen-linux-gnueabi/usr/lib/lib': File exists [ 33s] + builtin echo 0 [ 33s] + '[' -f /usr/bin/gcc ']' [ 33s] ++ LANG=C [ 33s] ++ gcc --version [ 33s] ++ head -1 [ 33s] ++ sed -e 's/^.*gcc[^0-9]*\([0-9]*\)\.\([0-9]*\)\.\([0-9]*\).*$/\1.\2/' [ 33s] + export GCCVER=4.9 [ 33s] + GCCVER=4.9 [ 33s] + for f in crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o [ 33s] + ln -s /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/crtbegin.o /usr/armv7l-tizen-linux-gnueabi/bin/crtbegin.o [ 33s] + for f in crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o [ 33s] + ln -s /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/crtbeginS.o /usr/armv7l-tizen-linux-gnueabi/bin/crtbeginS.o [ 33s] + for f in crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o [ 33s] + ln -s /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/crtbeginT.o /usr/armv7l-tizen-linux-gnueabi/bin/crtbeginT.o [ 33s] + for f in crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o [ 33s] + ln -s /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/crtend.o /usr/armv7l-tizen-linux-gnueabi/bin/crtend.o [ 33s] + for f in crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o [ 33s] + ln -s /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/crtendS.o /usr/armv7l-tizen-linux-gnueabi/bin/crtendS.o [ 33s] [101/101] installing rpm-build-4.11.0.1-29.2 [ 33s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 33s] removing nis flags from //etc/nsswitch.conf... [ 33s] now finalizing build dir... [ 34s] qemu: Unsupported syscall: 311 [ 39s] build target is armv7l-tizen-linux [ 39s] ----------------------------------------------------------------- [ 39s] I have the following modifications for perl-YAML.spec: [ 39s] 17c17 [ 39s] < Release: 0 [ 39s] --- [ 39s] > Release: 6.1 [ 39s] 52a53 [ 39s] > %changelog [ 39s] ----------------------------------------------------------------- [ 39s] ----- building perl-YAML.spec (user abuild) [ 39s] ----------------------------------------------------------------- [ 39s] ----------------------------------------------------------------- [ 39s] qemu: Unsupported syscall: 311 [ 39s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0.2015.Q2:Common/arm-wayland/1e47345c67f46441e1cb0510fb853747-perl-YAML' /home/abuild/rpmbuild/SOURCES/perl-YAML.spec [ 41s] Building target platforms: armv7l-tizen-linux [ 41s] Building for target armv7l-tizen-linux [ 41s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.9J7Pyk [ 41s] + umask 022 [ 41s] + cd /home/abuild/rpmbuild/BUILD [ 41s] + cd /home/abuild/rpmbuild/BUILD [ 41s] + rm -rf YAML-0.84 [ 41s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/YAML-0.84.tar.gz [ 41s] + /bin/tar -xf - [ 41s] + STATUS=0 [ 41s] + '[' 0 -ne 0 ']' [ 41s] + cd YAML-0.84 [ 41s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 41s] + cp /home/abuild/rpmbuild/SOURCES/perl-YAML.manifest . [ 41s] + exit 0 [ 41s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.lqT33T [ 41s] + umask 022 [ 41s] + cd /home/abuild/rpmbuild/BUILD [ 41s] + cd YAML-0.84 [ 41s] ++ uname -m [ 41s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 41s] + LANG=C [ 41s] + export LANG [ 41s] + unset DISPLAY [ 41s] + CFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -Wp,-D__SOFTFP__ -g' [ 41s] + export CFLAGS [ 41s] + CXXFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -Wp,-D__SOFTFP__ -g' [ 41s] + export CXXFLAGS [ 41s] + FFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -Wp,-D__SOFTFP__ -g -I%_fmoddir' [ 41s] + export FFLAGS [ 41s] + LD_AS_NEEDED=1 [ 41s] + export LD_AS_NEEDED [ 41s] + perl Makefile.PL INSTALLDIRS=vendor [ 43s] Checking if your kit is complete... [ 43s] Looks good [ 44s] Generating a Unix-style Makefile [ 44s] Writing Makefile for YAML [ 44s] Writing MYMETA.yml and MYMETA.json [ 44s] + make -j8 [ 45s] cp lib/YAML/Mo.pm blib/lib/YAML/Mo.pm [ 45s] cp lib/Test/YAML.pm blib/lib/Test/YAML.pm [ 45s] cp lib/YAML/Node.pm blib/lib/YAML/Node.pm [ 45s] cp lib/YAML/Error.pm blib/lib/YAML/Error.pm [ 45s] cp lib/YAML/Loader/Base.pm blib/lib/YAML/Loader/Base.pm [ 45s] cp lib/YAML/Marshall.pm blib/lib/YAML/Marshall.pm [ 45s] cp lib/YAML/Types.pm blib/lib/YAML/Types.pm [ 45s] cp lib/YAML/Dumper.pm blib/lib/YAML/Dumper.pm [ 45s] cp lib/YAML/Tag.pm blib/lib/YAML/Tag.pm [ 45s] cp lib/YAML/Dumper/Base.pm blib/lib/YAML/Dumper/Base.pm [ 45s] cp lib/YAML/Loader.pm blib/lib/YAML/Loader.pm [ 45s] cp lib/YAML.pm blib/lib/YAML.pm [ 45s] cp lib/YAML/Any.pm blib/lib/YAML/Any.pm [ 47s] Manifying blib/man3/Test::YAML.3pm [ 47s] Manifying blib/man3/YAML.3pm [ 47s] Manifying blib/man3/YAML::Any.3pm [ 47s] Manifying blib/man3/YAML::Dumper.3pm [ 47s] Manifying blib/man3/YAML::Dumper::Base.3pm [ 47s] Manifying blib/man3/YAML::Error.3pm [ 47s] Manifying blib/man3/YAML::Loader.3pm [ 47s] Manifying blib/man3/YAML::Loader::Base.3pm [ 47s] Manifying blib/man3/YAML::Marshall.3pm [ 47s] Manifying blib/man3/YAML::Node.3pm [ 47s] Manifying blib/man3/YAML::Tag.3pm [ 47s] Manifying blib/man3/YAML::Types.3pm [ 47s] + exit 0 [ 47s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.PXrEbL [ 47s] + umask 022 [ 47s] + cd /home/abuild/rpmbuild/BUILD [ 47s] + cd YAML-0.84 [ 47s] + LANG=C [ 47s] + export LANG [ 47s] + unset DISPLAY [ 47s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm [ 47s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm [ 47s] + make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm install_vendor [ 49s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/YAML.pm [ 49s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/YAML/Types.pm [ 49s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/YAML/Error.pm [ 49s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/YAML/Marshall.pm [ 49s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/YAML/Loader.pm [ 49s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/YAML/Mo.pm [ 49s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/YAML/Any.pm [ 49s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/YAML/Node.pm [ 49s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/YAML/Tag.pm [ 49s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/YAML/Dumper.pm [ 49s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/YAML/Dumper/Base.pm [ 49s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/YAML/Loader/Base.pm [ 49s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/Test/YAML.pm [ 49s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/share/man/man3/YAML::Loader::Base.3pm [ 49s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/share/man/man3/YAML::Marshall.3pm [ 49s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/share/man/man3/YAML::Tag.3pm [ 49s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/share/man/man3/YAML.3pm [ 49s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/share/man/man3/YAML::Dumper::Base.3pm [ 49s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/share/man/man3/YAML::Any.3pm [ 49s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/share/man/man3/YAML::Dumper.3pm [ 49s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/share/man/man3/YAML::Error.3pm [ 49s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/share/man/man3/Test::YAML.3pm [ 49s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/share/man/man3/YAML::Loader.3pm [ 49s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/share/man/man3/YAML::Types.3pm [ 49s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/share/man/man3/YAML::Node.3pm [ 49s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/5.20.0/armv7l-linux-thread-multi/perllocal.pod [ 49s] + test -n /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm -a -d /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/armv7l-linux-thread-multi/auto [ 49s] + find /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/armv7l-linux-thread-multi/auto -name .packlist -print0 [ 49s] + xargs -0 -r rm [ 49s] + '[' noarch == noarch ']' [ 49s] + find /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/armv7l-linux-thread-multi/auto -depth -type d -print0 [ 49s] + xargs -0 -r rmdir [ 49s] + rm -f /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/5.20.0/armv7l-linux-thread-multi/perllocal.pod [ 49s] + FILES=perl-YAML.files [ 49s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0 -maxdepth 1 -type f [ 49s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/YAML.pm [ 49s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/YAML.pm ']' [ 49s] + for file in '$RES' [ 49s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/YAML.pm [ 49s] + fgen_file /usr/lib/perl5/vendor_perl/5.20.0/YAML.pm [ 49s] + /bin/cat [ 49s] + base_dir=/home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/ [ 49s] ++ sort [ 49s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/ -type d [ 49s] + for dir in '`find ${base_dir} -type d | sort`' [ 49s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/ = /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/ ']' [ 49s] + continue [ 49s] + for dir in '`find ${base_dir} -type d | sort`' [ 49s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/Test = /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/ ']' [ 49s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/Test [ 49s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/ '{print $2}' [ 49s] + el=Test [ 49s] + all_dir=(${all_dir[@]} $el) [ 49s] + for dir in '`find ${base_dir} -type d | sort`' [ 49s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/YAML = /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/ ']' [ 49s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/YAML [ 49s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/ '{print $2}' [ 49s] + el=YAML [ 49s] + all_dir=(${all_dir[@]} $el) [ 49s] + for dir in '`find ${base_dir} -type d | sort`' [ 50s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/YAML/Dumper = /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/ ']' [ 50s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/ '{print $2}' [ 50s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/YAML/Dumper [ 50s] + el=YAML/Dumper [ 50s] + all_dir=(${all_dir[@]} $el) [ 50s] + for dir in '`find ${base_dir} -type d | sort`' [ 50s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/YAML/Loader = /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/ ']' [ 50s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/YAML/Loader [ 50s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/ '{print $2}' [ 50s] + el=YAML/Loader [ 50s] + all_dir=(${all_dir[@]} $el) [ 50s] + for dir in '`find ${base_dir} -type d | sort`' [ 50s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/armv7l-linux-thread-multi = /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/ ']' [ 50s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/armv7l-linux-thread-multi [ 50s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0/ '{print $2}' [ 50s] + el=armv7l-linux-thread-multi [ 50s] + all_dir=(${all_dir[@]} $el) [ 50s] + for i in '${all_dir[@]}' [ 50s] + '[' Test = auto ']' [ 50s] + '[' /usr/lib/perl5/vendor_perl/5.20.0/Test = /usr/lib/perl5/vendor_perl/5.20.0/armv7l-linux-thread-multi/auto ']' [ 50s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//Test ']' [ 50s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//Test -maxdepth 1 -type f [ 50s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//Test/YAML.pm [ 50s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//Test/YAML.pm ']' [ 50s] + fgen_dir /usr/lib/perl5/vendor_perl/5.20.0/Test [ 50s] + /bin/cat [ 50s] + for file in '$RES' [ 50s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//Test/YAML.pm [ 50s] + fgen_file /usr/lib/perl5/vendor_perl/5.20.0/Test/YAML.pm [ 50s] + /bin/cat [ 50s] + for i in '${all_dir[@]}' [ 50s] + '[' YAML = auto ']' [ 50s] + '[' /usr/lib/perl5/vendor_perl/5.20.0/YAML = /usr/lib/perl5/vendor_perl/5.20.0/armv7l-linux-thread-multi/auto ']' [ 50s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML ']' [ 50s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML -maxdepth 1 -type f [ 50s] + RES='/home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Types.pm [ 50s] /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Error.pm [ 50s] /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Marshall.pm [ 50s] /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Loader.pm [ 50s] /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Mo.pm [ 50s] /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Any.pm [ 50s] /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Node.pm [ 50s] /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Tag.pm [ 50s] /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Dumper.pm' [ 50s] + '[' -n '/home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Types.pm [ 50s] /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Error.pm [ 50s] /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Marshall.pm [ 50s] /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Loader.pm [ 50s] /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Mo.pm [ 50s] /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Any.pm [ 50s] /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Node.pm [ 50s] /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Tag.pm [ 50s] /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Dumper.pm' ']' [ 50s] + fgen_dir /usr/lib/perl5/vendor_perl/5.20.0/YAML [ 50s] + /bin/cat [ 50s] + for file in '$RES' [ 50s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Types.pm [ 50s] + fgen_file /usr/lib/perl5/vendor_perl/5.20.0/YAML/Types.pm [ 50s] + /bin/cat [ 50s] + for file in '$RES' [ 50s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Error.pm [ 50s] + fgen_file /usr/lib/perl5/vendor_perl/5.20.0/YAML/Error.pm [ 50s] + /bin/cat [ 50s] + for file in '$RES' [ 50s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Marshall.pm [ 50s] + fgen_file /usr/lib/perl5/vendor_perl/5.20.0/YAML/Marshall.pm [ 50s] + /bin/cat [ 50s] + for file in '$RES' [ 50s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Loader.pm [ 50s] + fgen_file /usr/lib/perl5/vendor_perl/5.20.0/YAML/Loader.pm [ 50s] + /bin/cat [ 50s] + for file in '$RES' [ 50s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Mo.pm [ 50s] + fgen_file /usr/lib/perl5/vendor_perl/5.20.0/YAML/Mo.pm [ 50s] + /bin/cat [ 50s] + for file in '$RES' [ 50s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Any.pm [ 50s] + fgen_file /usr/lib/perl5/vendor_perl/5.20.0/YAML/Any.pm [ 50s] + /bin/cat [ 50s] + for file in '$RES' [ 50s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Node.pm [ 50s] + fgen_file /usr/lib/perl5/vendor_perl/5.20.0/YAML/Node.pm [ 50s] + /bin/cat [ 50s] + for file in '$RES' [ 50s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Tag.pm [ 50s] + fgen_file /usr/lib/perl5/vendor_perl/5.20.0/YAML/Tag.pm [ 50s] + /bin/cat [ 50s] + for file in '$RES' [ 50s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Dumper.pm [ 50s] + fgen_file /usr/lib/perl5/vendor_perl/5.20.0/YAML/Dumper.pm [ 50s] + /bin/cat [ 50s] + for i in '${all_dir[@]}' [ 50s] + '[' YAML/Dumper = auto ']' [ 50s] + '[' /usr/lib/perl5/vendor_perl/5.20.0/YAML/Dumper = /usr/lib/perl5/vendor_perl/5.20.0/armv7l-linux-thread-multi/auto ']' [ 50s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Dumper ']' [ 50s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Dumper -maxdepth 1 -type f [ 50s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Dumper/Base.pm [ 50s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Dumper/Base.pm ']' [ 50s] + fgen_dir /usr/lib/perl5/vendor_perl/5.20.0/YAML/Dumper [ 50s] + /bin/cat [ 50s] + for file in '$RES' [ 50s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Dumper/Base.pm [ 50s] + fgen_file /usr/lib/perl5/vendor_perl/5.20.0/YAML/Dumper/Base.pm [ 50s] + /bin/cat [ 50s] + for i in '${all_dir[@]}' [ 50s] + '[' YAML/Loader = auto ']' [ 50s] + '[' /usr/lib/perl5/vendor_perl/5.20.0/YAML/Loader = /usr/lib/perl5/vendor_perl/5.20.0/armv7l-linux-thread-multi/auto ']' [ 50s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Loader ']' [ 50s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Loader -maxdepth 1 -type f [ 50s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Loader/Base.pm [ 50s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Loader/Base.pm ']' [ 50s] + fgen_dir /usr/lib/perl5/vendor_perl/5.20.0/YAML/Loader [ 50s] + /bin/cat [ 50s] + for file in '$RES' [ 50s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//YAML/Loader/Base.pm [ 50s] + fgen_file /usr/lib/perl5/vendor_perl/5.20.0/YAML/Loader/Base.pm [ 50s] + /bin/cat [ 50s] + for i in '${all_dir[@]}' [ 50s] + '[' armv7l-linux-thread-multi = auto ']' [ 50s] + '[' /usr/lib/perl5/vendor_perl/5.20.0/armv7l-linux-thread-multi = /usr/lib/perl5/vendor_perl/5.20.0/armv7l-linux-thread-multi/auto ']' [ 50s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//armv7l-linux-thread-multi ']' [ 50s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/lib/perl5/vendor_perl/5.20.0//armv7l-linux-thread-multi -maxdepth 1 -type f [ 50s] + RES= [ 50s] + '[' -n '' ']' [ 50s] + fgen_dir /usr/lib/perl5/vendor_perl/5.20.0/armv7l-linux-thread-multi [ 50s] + /bin/cat [ 50s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/share/man ']' [ 50s] + fgen_file '/usr/share/man/man?/*' [ 50s] + /bin/cat [ 50s] + '[' -f /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/var/adm/perl-modules/perl-YAML ']' [ 50s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm/usr/bin ']' [ 50s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/YAML-0.84 [ 50s] + /usr/lib/rpm/brp-compress [ 50s] + /usr/lib/rpm/brp-tizen [ 50s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm [ 50s] Processing files: perl-YAML-0.84-6.1.noarch [ 51s] Provides: perl(Test::YAML) = 0.84 perl(Test::YAML::Filter) perl(YAML) = 0.84 perl(YAML::Any) = 0.84 perl(YAML::Dumper) = 0.84 perl(YAML::Dumper::Base) = 0.84 perl(YAML::Error) = 0.84 perl(YAML::Loader) = 0.84 perl(YAML::Loader::Base) = 0.84 perl(YAML::Marshall) = 0.84 perl(YAML::Mo) perl(YAML::Node) = 0.84 perl(YAML::Tag) = 0.84 perl(YAML::Type::blessed) perl(YAML::Type::code) perl(YAML::Type::glob) perl(YAML::Type::ref) perl(YAML::Type::regexp) perl(YAML::Type::undef) perl(YAML::Types) = 0.84 perl(YAML::Warning) perl(yaml_mapping) perl(yaml_scalar) perl(yaml_sequence) perl-YAML = 0.84-6.1 [ 51s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 51s] Processing files: perl-YAML-debugsource-0.84-6.1.noarch [ 51s] Provides: perl-YAML-debugsource = 0.84-6.1 [ 51s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 51s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm [ 51s] warning: Could not canonicalize hostname: w06 [ 51s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-YAML-0.84-6.1.src.rpm [ 51s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/perl-YAML-0.84-6.1.noarch.rpm [ 51s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/perl-YAML-debugsource-0.84-6.1.noarch.rpm [ 51s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.tDPgo2 [ 51s] + umask 022 [ 51s] + cd /home/abuild/rpmbuild/BUILD [ 51s] + cd YAML-0.84 [ 51s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-YAML-0.84-6.1.arm [ 51s] + exit 0 [ 52s] ... checking for files with abuild user/group [ 52s] [ 52s] RPMLINT report: [ 52s] =============== [ 52s] qemu: Unsupported syscall: 311 [ 60s] perl-YAML.noarch: E: non-standard-group (Badness: 200) Development/Libraries/Perl [ 60s] perl-YAML.src: E: non-standard-group (Badness: 200) Development/Libraries/Perl [ 60s] The value of the Group tag in the package is not valid. Valid groups are [ 60s] listed here: https://wiki.tizen.org/wiki/Packaging/Guidelines#Group_Tag [ 60s] [ 60s] perl-YAML.noarch: W: no-dependency-on perl-base 5.20.0 [ 60s] 2 packages and 0 specfiles checked; 2 errors, 1 warnings. [ 60s] [ 60s] ... creating baselibs [ 60s] qemu: Unsupported syscall: 311 [ 61s] ... comparing built packages with the former built [ 61s] /usr/lib/build/pkg-diff.sh [ 61s] compare /.build.oldpackages/perl-YAML-0.84-4.2.src.rpm /home/abuild/rpmbuild/SRPMS/perl-YAML-0.84-6.1.src.rpm [ 61s] comparing rpmtags [ 61s] comparing RELEASE [ 61s] comparing PROVIDES [ 61s] comparing scripts [ 61s] comparing filelist [ 61s] comparing file checksum [ 61s] RPM meta information is identical [ 61s] compare /.build.oldpackages/perl-YAML-0.84-4.2.noarch.rpm /home/abuild/rpmbuild/RPMS/noarch/perl-YAML-0.84-6.1.noarch.rpm [ 62s] Comparing perl-YAML-0.84-4.2.noarch.rpm to perl-YAML-0.84-6.1.noarch.rpm [ 62s] comparing rpmtags [ 62s] --- /tmp/tmp.5Ucmd8BNS0/tmp.b85EoBhK0s 2015-06-16 05:25:33.000000000 +0000 [ 62s] +++ /tmp/tmp.5Ucmd8BNS0/tmp.SGBehugOa6 2015-06-16 05:25:33.000000000 +0000 [ 62s] @@ -8,7 +8,7 @@ [ 62s] programming languages. (Including Perl!!!) [ 62s] [ 62s] For information on the YAML syntax, please refer to the YAML specification. [ 62s] - tizen Tizen:Common / arm-wayland obs://build.tizen.org/Tizen:Common/arm-wayland/bda8f9571cf3c39f54920c876d3ead5e-perl-YAML GPL-2.0+ or Artistic-1.0 GPL-2.0+ or Artistic-1.0 [ 62s] + tizen Tizen:3.0.2015.Q2:Common / arm-wayland obs://build.tizen.org/Tizen:3.0.2015.Q2:Common/arm-wayland/1e47345c67f46441e1cb0510fb853747-perl-YAML GPL-2.0+ or Artistic-1.0 GPL-2.0+ or Artistic-1.0 [ 62s] Development/Libraries/Perl http://search.cpan.org/dist/YAML/ (none) (none) (none) [ 62s] (none) 4.11.0.1 noarch-tizen-linux [ 62s] cpio lzma 5 [ 62s] RPM meta information is different [ 62s] compare /.build.oldpackages/perl-YAML-debugsource-0.84-4.2.noarch.rpm /home/abuild/rpmbuild/RPMS/noarch/perl-YAML-debugsource-0.84-6.1.noarch.rpm [ 62s] Comparing perl-YAML-debugsource-0.84-4.2.noarch.rpm to perl-YAML-debugsource-0.84-6.1.noarch.rpm [ 62s] comparing rpmtags [ 62s] --- /tmp/tmp.2priakzqdJ/tmp.4c9ypBIheM 2015-06-16 05:25:33.000000000 +0000 [ 62s] +++ /tmp/tmp.2priakzqdJ/tmp.9Aqqkl0Bky 2015-06-16 05:25:33.000000000 +0000 [ 62s] @@ -3,7 +3,7 @@ [ 62s] This package provides debug sources for package perl-YAML. [ 62s] Debug sources are useful when developing applications that use this [ 62s] package or when debugging this package. [ 62s] - tizen Tizen:Common / arm-wayland obs://build.tizen.org/Tizen:Common/arm-wayland/bda8f9571cf3c39f54920c876d3ead5e-perl-YAML GPL-2.0+ or Artistic-1.0 GPL-2.0+ or Artistic-1.0 [ 62s] + tizen Tizen:3.0.2015.Q2:Common / arm-wayland obs://build.tizen.org/Tizen:3.0.2015.Q2:Common/arm-wayland/1e47345c67f46441e1cb0510fb853747-perl-YAML GPL-2.0+ or Artistic-1.0 GPL-2.0+ or Artistic-1.0 [ 62s] Development/Debug http://search.cpan.org/dist/YAML/ (none) (none) (none) [ 62s] (none) 4.11.0.1 noarch-tizen-linux [ 62s] cpio lzma 5 [ 62s] RPM meta information is different [ 62s] comparing /.build.oldpackages/rpmlint.log and /home/abuild/rpmbuild/OTHER/rpmlint.log [ 62s] ... saving built statistics [ 62s] ... saving built packages [ 62s] /home/abuild/rpmbuild/RPMS/noarch/perl-YAML-0.84-6.1.noarch.rpm [ 62s] /home/abuild/rpmbuild/RPMS/noarch/perl-YAML-debugsource-0.84-6.1.noarch.rpm [ 62s] /home/abuild/rpmbuild/SRPMS/perl-YAML-0.84-6.1.src.rpm [ 62s] /home/abuild/rpmbuild/OTHER/_statistics [ 62s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 62s] [ 62s] w06 finished "build perl-YAML.spec" at Tue Jun 16 05:25:33 UTC 2015. [ 62s] [ 66s] [ 54.496136] SysRq : Power Off [ 66s] [ 54.712261] Power down. [ 66s] build: extracting built packages... [ 66s] perl-YAML-0.84-6.1.noarch.rpm [ 66s] perl-YAML-debugsource-0.84-6.1.noarch.rpm [ 66s] perl-YAML-0.84-6.1.src.rpm [ 66s] _statistics [ 66s] rpmlint.log Retried build at Tue Jun 16 02:38:47 2015 returned same result, skipped Retried build at Tue Jun 16 13:22:35 2015 returned same result, skipped Retried build at Wed Jun 17 08:59:50 2015 returned same result, skipped Retried build at Tue Jun 23 09:27:56 2015 returned same result, skipped