[    0s] Using BUILD_ROOT=/srv/build/root_2/.mount
[    0s] Using BUILD_ARCH=armv7l:armv5tel
[    0s] Doing kvm build in /srv/build/root_2/root
[    0s] 
[    0s] 
[    0s] w18 started "build _service:gbs:perl-WWW-Curl.spec" at Tue Jun 23 17:09:28 UTC 2015.
[    0s] 
[    0s] Building perl-WWW-Curl for project 'Tizen:3.0.2015.Q2:Common' repository 'arm-x11' arch 'armv7l' srcmd5 '1e9065750c685e7fda9c8a3aad297fd8'
[    0s] 
[    0s] processing specfile /srv/build/root_2/.build-srcdir/_service:gbs:perl-WWW-Curl.spec ...
[    0s] running changelog2spec --target rpm --file /srv/build/root_2/.build-srcdir/_service:gbs:perl-WWW-Curl.spec
[    0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_2/.build.rpmlist /srv/build/root_2/.build-srcdir/_service:gbs:perl-WWW-Curl.spec build rpmlint-Factory ...
[    1s] registering binfmt handlers for VM
[    1s] /.build/qemu-reg: No such file or directory
[    1s] /.build/qemu-reg: failed. Trying alternate binfmt file
[    1s] write: Invalid argument
[    1s] /proc/sys/fs/binfmt_misc/register: write failed
[    1s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P
[    1s] 
[    1s] /usr/lib/build/qemu-reg: binfmt registration failed
[    1s] cycle: libsoftokn3 -> nss
[    1s]   breaking dependency nss -> libsoftokn3
[    1s] [1/39] preinstalling libmagic-data...
[    1s] [2/39] preinstalling setup...
[    1s] [3/39] preinstalling filesystem...
[    1s] [4/39] preinstalling glibc...
[    1s] [5/39] preinstalling libgcc_s1...
[    1s] [6/39] preinstalling bash...
[    1s] [7/39] preinstalling diffutils...
[    1s] [8/39] preinstalling libattr...
[    1s] [9/39] preinstalling libbz2...
[    1s] [10/39] preinstalling libelf...
[    1s] [11/39] preinstalling libfreebl3...
[    1s] [12/39] preinstalling liblua...
[    1s] [13/39] preinstalling liblzma...
[    2s] [14/39] preinstalling libncurses...
[    2s] [15/39] preinstalling libpopt...
[    2s] [16/39] preinstalling libsmack...
[    2s] [17/39] preinstalling libsqlite...
[    2s] [18/39] preinstalling libuuid...
[    2s] [19/39] preinstalling nspr...
[    2s] [20/39] preinstalling sed...
[    2s] [21/39] preinstalling tar...
[    2s] [22/39] preinstalling zlib...
[    2s] [23/39] preinstalling qemu-accel-armv7l-cross-arm...
[    5s] [24/39] preinstalling qemu-linux-user-cross-arm...
[    6s] [25/39] preinstalling grep...
[    6s] [26/39] preinstalling libacl...
[    6s] [27/39] preinstalling libblkid...
[    6s] [28/39] preinstalling libcap...
[    6s] [29/39] preinstalling libreadline...
[    6s] [30/39] preinstalling smack...
[    6s] [31/39] preinstalling bzip2...
[    6s] [32/39] preinstalling libmagic...
[    6s] [33/39] preinstalling libxml2...
[    6s] [34/39] preinstalling libmount...
[    6s] [35/39] preinstalling coreutils...
[    6s] [36/39] preinstalling util-linux...
[    6s] [37/39] preinstalling nss...
[    7s] [38/39] preinstalling libsoftokn3...
[    7s] [39/39] preinstalling rpm...
[    7s] 
[    7s] [1/9] preinstalling libext2fs...
[    7s] [2/9] preinstalling libpcre...
[    7s] [3/9] preinstalling libsmartcols...
[    7s] [4/9] preinstalling libuuid...
[    7s] [5/9] preinstalling perl...
[    8s] [6/9] preinstalling grep...
[    8s] [7/9] preinstalling libblkid...
[    9s] [8/9] preinstalling libmount...
[    9s] [9/9] preinstalling util-linux...
[    9s] copying packages...
[    9s] reordering...cycle: gcc49-locale -> gcc49
[    9s]   breaking dependency gcc49 -> gcc49-locale
[    9s] cycle: coreutils -> pam
[    9s]   breaking dependency pam -> coreutils
[    9s] cycle: nss -> libsoftokn3
[    9s]   breaking dependency nss -> libsoftokn3
[    9s] done
[   15s] booting kvm ...
[   15s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 8000 -drive file=/srv/build/root_2/root,if=virtio,cache=none -drive file=/srv/build/root_2/root,if=ide,index=0,cache=none -drive file=/srv/build/root_2/swap,if=virtio,cache=none -smp 4
[   18s] doing fast boot
[   18s] Creating device nodes with udev
[   20s] Waiting for device /dev/vda to appear:  ok
[   20s] fsck from util-linux 2.21.2
[   20s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda 
[   20s] /dev/vda: clean, 4727/2392064 files, 263210/9568256 blocks
[   20s] fsck succeeded. Mounting root device read-write.
[   20s] Mounting root /dev/vda
[   20s] mount -o rw -t ext4 /dev/vda /root
[   20s] replacing /etc/mtab with symlink to /proc/self/mounts
[   20s] 2nd stage started in virtual machine
[   20s] machine type: armv7l
[   20s] swapon /dev/vdb
[   20s] swapon: /dev/vdb: found swap signature: version 1d, page-size 4, same byte order
[   20s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648
[   20s] VM_IMAGE: , VM_SWAP: /dev/vdb
[   20s] mount: none is already mounted or /proc busy
[   20s] mount: none is already mounted or /dev/pts busy
[   20s] logging output to //.build.log...
[   21s] processing specfile /.build-srcdir/_service:gbs:perl-WWW-Curl.spec ...
[   21s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:perl-WWW-Curl.spec build rpmlint-Factory ...
[   21s] running qemu-accel-armv7l-cross-arm postinstall script
[   21s] ++ uname -m
[   21s] + '[' armv7l = armv7l ']'
[   21s] + builtin echo armv7l arch
[   21s] armv7l arch
[   21s] + ln -sf /emul/i586-for-arm/lib/libnsl.so.1 /lib/libnsl.so.1
[   21s] + /usr/sbin/ldconfig
[   21s] + '[' '!' -d /proc/sys/fs/binfmt_misc ']'
[   21s] + did_mount_it=
[   21s] + '[' '!' -f /proc/sys/fs/binfmt_misc/register ']'
[   21s] + '[' -e /proc/sys/fs/binfmt_misc/arm ']'
[   21s] + builtin echo Registering accelerated handler
[   21s] Registering accelerated handler
[   21s] + builtin echo -1
[   21s] + builtin echo ':arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/qemu/qemu-arm-binfmt:P'
[   21s] + '[' ']'
[   21s] + ls /qemu
[   21s] + read f
[   21s] + '[' -f /usr/bin/qemu-arm ']'
[   21s] + builtin echo /usr/bin/qemu-arm already 'presents!'
[   21s] /usr/bin/qemu-arm already presents!
[   21s] + read f
[   21s] + '[' -f /usr/bin/qemu-arm-binfmt ']'
[   21s] + builtin echo /usr/bin/qemu-arm-binfmt already 'presents!'
[   21s] /usr/bin/qemu-arm-binfmt already presents!
[   21s] + read f
[   21s] + builtin echo All done
[   21s] All done
[   21s] + rm -rf /usr/armv7l-tizen-linux-gnueabi/lib
[   21s] + ln -s /lib /usr/armv7l-tizen-linux-gnueabi/usr/lib
[   21s] + builtin echo 0
[   21s] + '[' -f /usr/bin/gcc ']'
[   21s] ++ echo -n i686
[   21s] ++ sed -e s/i.86/i586/
[   21s] + HOST_ARCH=i586
[   21s] + ACCEL_DIR=/emul/i586-for-arm
[   21s] + mkdir -p /usr/bin/../lib/bfd-plugins
[   21s] + /usr/sbin/update-alternatives --install /usr/bin/../lib/bfd-plugins/liblto_plugin_i386.so liblto_plugin_i386.so /emul/i586-for-arm/usr/lib/gcc/armv7l-tizen-linux-gnueabi//liblto_plugin.so 3
[   21s] .init_b_cache/scripts/qemu-accel-armv7l-cross-arm.post: line 59: /usr/sbin/update-alternatives: No such file or directory
[   21s] running setup postinstall script
[   21s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name'
[   21s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do'
[   21s] initializing rpm db...
[   22s] [1/114] installing libmagic-data-5.18-8.4
[   22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   22s] [2/114] installing libstdc++-locale-4.9.2-12.2
[   22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   22s] [3/114] installing setup-0.9-10.3
[   22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   22s] [4/114] installing terminfo-base-5.9-6.4
[   22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   22s] [5/114] installing filesystem-3.1-11.1
[   22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   22s] [6/114] installing glibc-2.21-8.19
[   22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   22s] [7/114] installing libatomic-4.9.2-12.2
[   22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   22s] [8/114] installing libgcc_s1-4.9.2-12.2
[   23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   23s] [9/114] installing libgomp-4.9.2-12.2
[   23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   23s] [10/114] installing bash-4.3.30-16.6
[   23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   23s] [11/114] installing cpio-2.11-7.3
[   23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   23s] [12/114] installing diffutils-3.3-7.3
[   23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   23s] [13/114] installing findutils-4.5.14-7.4
[   23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   23s] [14/114] installing gawk-4.1.1-7.3
[   23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   23s] [15/114] installing hostname-3.12-6.3
[   23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   23s] [16/114] installing libattr-2.4.47-8.4
[   23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   23s] [17/114] installing libbz2-1.0.6-6.13
[   23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   23s] [18/114] installing libcares-1.10.0-8.3
[   23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   23s] [19/114] installing libelf-0.160-7.6
[   23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   23s] [20/114] installing libext2fs-1.42.11-9.3
[   23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   23s] [21/114] installing libfreebl3-3.17.2-12.30
[   23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   23s] [22/114] installing libgdbm-1.11-8.6
[   24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   24s] [23/114] installing libgmp-6.0.0-7.4
[   24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   24s] [24/114] installing libitm-4.9.2-12.2
[   24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   24s] [25/114] installing libltdl-2.4.2-6.5
[   24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   24s] [26/114] installing liblua-5.1.4-8.3
[   24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   24s] [27/114] installing liblzma-5.1.3-7.5
[   24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   24s] [28/114] installing libpcre-8.31-5.3
[   24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   24s] [29/114] installing libpopt-1.16-5.5
[   24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   24s] [30/114] installing libsmack-1.1.0-11.4
[   24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   24s] [31/114] installing libsmartcols-2.25.2-10.5
[   24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   24s] [32/114] installing libsqlite-3.7.14-10.4
[   24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   24s] [33/114] installing libuuid-2.25.2-10.5
[   24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   24s] [34/114] installing m4-1.4.17-7.3
[   24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   24s] [35/114] installing net-tools-2.0_20121208git-5.4
[   25s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   25s] [36/114] installing nspr-4.10.7-8.7
[   25s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   25s] [37/114] installing patch-2.7-5.4
[   25s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   25s] [38/114] installing pkg-config-0.28-6.4
[   25s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   25s] [39/114] installing sed-4.2.2-7.3
[   25s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   25s] [40/114] installing tar-1.27-5.3
[   25s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   25s] [41/114] installing update-alternatives-1.16.3-7.3
[   25s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   25s] [42/114] installing which-2.20-5.3
[   25s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   25s] [43/114] installing zlib-1.2.8-7.5
[   25s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   25s] [44/114] installing libncurses-5.9-6.4
[   25s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   25s] [45/114] installing libstdc++-4.9.2-12.2
[   25s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   25s] [46/114] installing build-compare-2015.04.28-10.6
[   25s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   25s] [47/114] installing gcc49-info-4.9.2-12.2
[   25s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   25s] [48/114] installing qemu-linux-user-cross-arm-2.2.0-9.7
[   26s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   26s] [49/114] installing db4-4.8.30.NC-6.7
[   27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   27s] [50/114] installing less-466-7.3
[   27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   27s] [51/114] installing libacl-2.2.52-8.3
[   27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   27s] [52/114] installing libasan-4.9.2-12.2
[   27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   27s] [53/114] installing libasm-0.160-7.6
[   28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   28s] [54/114] installing libblkid-2.25.2-10.5
[   28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   28s] [55/114] installing libcap-2.24-7.11
[   28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   28s] [56/114] installing libidn-1.25-6.3
[   28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   28s] [57/114] installing libmpfr-3.1.2-7.5
[   28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   29s] [58/114] installing libopenssl-1.0.1l-10.7
[   29s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   29s] [59/114] installing libreadline-5.2-6.3
[   29s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   29s] [60/114] installing libubsan-4.9.2-12.2
[   29s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   29s] [61/114] installing make-4.0-8.4
[   29s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   29s] [62/114] installing nss-certs-3.17.2-12.30
[   30s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   30s] [63/114] installing smack-1.1.0-11.4
[   30s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   30s] [64/114] installing bzip2-1.0.6-6.13
[   30s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   30s] [65/114] installing grep-2.19-7.3
[   30s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   30s] [66/114] installing libmagic-5.18-8.4
[   30s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   30s] [67/114] installing libxml2-2.8.0-8.4
[   30s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   30s] [68/114] installing xz-5.1.3-7.5
[   31s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   31s] [69/114] installing binutils-2.25-15.2
[   31s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   31s] update-alternatives: using /usr/bin/ld.bfd to provide /usr/bin/ld (ld) in auto mode.
[   32s] [70/114] installing libdw-0.160-7.6
[   32s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   32s] [71/114] installing binutils-gold-2.25-15.2
[   32s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   32s] update-alternatives: using /usr/bin/ld.gold to provide /usr/bin/ld (ld) in auto mode.
[   32s] [72/114] installing file-5.18-8.4
[   32s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   32s] [73/114] installing libmount-2.25.2-10.5
[   32s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   32s] [74/114] installing libmpc-1.0-5.6
[   32s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   32s] [75/114] installing openssl-1.0.1l-10.7
[   32s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   32s] [76/114] installing libcurl-7.37.1-8.2
[   33s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   33s] [77/114] installing perl-5.20.0-7.8
[   34s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   34s] [78/114] installing elfutils-0.160-7.6
[   34s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   34s] [79/114] installing build-mkbaselibs-20120927-8.1
[   34s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   34s] [80/114] installing perl-Devel-Symdump-2.08-5.1
[   34s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   34s] [81/114] installing autoconf-2.69-7.1
[   34s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   34s] [82/114] installing cpp49-4.9.2-12.2
[   35s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   35s] [83/114] installing cpp-4.9-8.1
[   35s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   35s] [84/114] installing perl-Pod-Coverage-0.22-6.1
[   35s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   35s] [85/114] installing build-20120927-8.1
[   35s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   36s] [86/114] installing perl-Test-Pod-Coverage-1.08-6.1
[   36s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   36s] [87/114] installing pam-1.1.6-8.6
[   36s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   36s] [88/114] installing nss-3.17.2-12.30
[   36s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   36s] [89/114] installing libsoftokn3-3.17.2-12.30
[   36s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   36s] [90/114] installing coreutils-8.21-9.3
[   36s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   36s] [91/114] installing util-linux-2.25.2-10.5
[   36s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   36s] [92/114] installing rpm-4.11.0.1-29.5
[   37s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   37s] [93/114] installing linux-glibc-devel-3.10-7.1
[   37s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   37s] [94/114] installing glibc-locale-2.21-8.19
[   38s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   38s] [95/114] installing automake-1.14.1-7.2
[   38s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   38s] [96/114] installing gzip-1.6-6.4
[   38s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   38s] [97/114] installing tzdata-2014h-7.3
[   39s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   39s] [98/114] installing rpmlint-mini-1.5-10.2
[   39s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   39s] [99/114] installing rpmlint-tizen-1.0-5.1
[   39s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   39s] [100/114] installing glibc-devel-2.21-8.19
[   39s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   39s] [101/114] installing libtool-2.4.2-6.5
[   39s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   39s] [102/114] installing libstdc++49-devel-4.9.2-12.2
[   40s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   40s] [103/114] installing libcares-devel-1.10.0-8.3
[   40s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   40s] [104/114] installing libidn-devel-1.25-6.3
[   40s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   40s] [105/114] installing zlib-devel-1.2.8-7.5
[   40s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   40s] [106/114] installing gcc49-4.9.2-12.2
[   41s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   41s] [107/114] installing gcc49-locale-4.9.2-12.2
[   41s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   41s] [108/114] installing gcc-4.9-8.1
[   41s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   41s] [109/114] installing libcurl-devel-7.37.1-8.2
[   41s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   41s] [110/114] installing libopenssl-devel-1.0.1l-10.7
[   41s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   41s] [111/114] installing gcc49-c++-4.9.2-12.2
[   42s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   42s] [112/114] installing gcc-c++-4.9-8.1
[   42s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   42s] [113/114] installing qemu-accel-armv7l-cross-arm-0.4-18.5
[   48s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   48s] ++ uname -m
[   48s] + '[' armv7l = armv7l ']'
[   48s] + builtin echo armv7l arch
[   48s] armv7l arch
[   48s] + ln -sf /emul/i586-for-arm/lib/libnsl.so.1 /lib/libnsl.so.1
[   48s] + /usr/sbin/ldconfig
[   48s] + '[' '!' -d /proc/sys/fs/binfmt_misc ']'
[   48s] + did_mount_it=
[   48s] + '[' '!' -f /proc/sys/fs/binfmt_misc/register ']'
[   48s] + '[' -e /proc/sys/fs/binfmt_misc/arm ']'
[   48s] + builtin echo Registering accelerated handler
[   48s] Registering accelerated handler
[   48s] + builtin echo -1
[   48s] + builtin echo ':arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/qemu/qemu-arm-binfmt:P'
[   48s] + '[' ']'
[   48s] + ls /qemu
[   48s] + read f
[   48s] + '[' -f /usr/bin/qemu-arm ']'
[   48s] + builtin echo /usr/bin/qemu-arm already 'presents!'
[   48s] /usr/bin/qemu-arm already presents!
[   48s] + read f
[   48s] + '[' -f /usr/bin/qemu-arm-binfmt ']'
[   48s] + builtin echo /usr/bin/qemu-arm-binfmt already 'presents!'
[   48s] /usr/bin/qemu-arm-binfmt already presents!
[   48s] + read f
[   48s] + builtin echo All done
[   48s] All done
[   48s] + rm -rf /usr/armv7l-tizen-linux-gnueabi/lib
[   48s] + ln -s /lib /usr/armv7l-tizen-linux-gnueabi/usr/lib
[   48s] ln: failed to create symbolic link '/usr/armv7l-tizen-linux-gnueabi/usr/lib/lib': File exists
[   48s] + builtin echo 0
[   48s] + '[' -f /usr/bin/gcc ']'
[   48s] ++ LANG=C
[   48s] ++ gcc --version
[   48s] ++ head -1
[   48s] ++ sed -e 's/^.*gcc[^0-9]*\(\([0-9]*\.\)\+[0-9]*\).*$/\1/'
[   48s] + export GCCVER=4.9.2
[   48s] + GCCVER=4.9.2
[   48s] + for f in crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o
[   48s] + ln -s /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/crtbegin.o /usr/armv7l-tizen-linux-gnueabi/bin/crtbegin.o
[   48s] + for f in crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o
[   48s] + ln -s /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/crtbeginS.o /usr/armv7l-tizen-linux-gnueabi/bin/crtbeginS.o
[   48s] + for f in crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o
[   48s] + ln -s /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/crtbeginT.o /usr/armv7l-tizen-linux-gnueabi/bin/crtbeginT.o
[   48s] + for f in crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o
[   48s] + ln -s /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/crtend.o /usr/armv7l-tizen-linux-gnueabi/bin/crtend.o
[   48s] + for f in crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o
[   48s] + ln -s /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/crtendS.o /usr/armv7l-tizen-linux-gnueabi/bin/crtendS.o
[   48s] ++ echo -n i686
[   48s] ++ sed -e s/i.86/i586/
[   48s] + HOST_ARCH=i586
[   48s] + ACCEL_DIR=/emul/i586-for-arm
[   48s] + mkdir -p /usr/bin/../lib/bfd-plugins
[   48s] + /usr/sbin/update-alternatives --install /usr/bin/../lib/bfd-plugins/liblto_plugin_i386.so liblto_plugin_i386.so /emul/i586-for-arm/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/liblto_plugin.so 3
[   48s] update-alternatives: error: alternative path /emul/i586-for-arm/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/liblto_plugin.so doesn't exist.
[   48s] warning: %post(qemu-accel-armv7l-cross-arm-0.4-18.5.armv7l) scriptlet failed, exit status 2
[   48s] [114/114] installing rpm-build-4.11.0.1-29.5
[   48s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory
[   48s] removing nis flags from //etc/nsswitch.conf...
[   48s] now finalizing build dir...
[   48s] qemu: Unsupported syscall: 311
[   50s] Warning: spec file parser line 24: can't expand %(...)
[   50s] Warning: spec file parser line 30: can't expand %(...)
[   53s] build target is armv7l-tizen-linux
[   53s] -----------------------------------------------------------------
[   53s] I have the following modifications for perl-WWW-Curl.spec:
[   53s] 18c18
[   53s] < release:   4.1
[   53s] ---
[   53s] > release:   5.2
[   54s] -----------------------------------------------------------------
[   54s] ----- building perl-WWW-Curl.spec (user abuild)
[   54s] -----------------------------------------------------------------
[   54s] -----------------------------------------------------------------
[   54s] qemu: Unsupported syscall: 311
[   54s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0.2015.Q2:Common/arm-x11/1e9065750c685e7fda9c8a3aad297fd8-perl-WWW-Curl' /home/abuild/rpmbuild/SOURCES/perl-WWW-Curl.spec
[   54s] Building target platforms: armv7l-tizen-linux
[   54s] Building for target armv7l-tizen-linux
[   54s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.b3bn5g
[   54s] + umask 022
[   54s] + cd /home/abuild/rpmbuild/BUILD
[   54s] + cd /home/abuild/rpmbuild/BUILD
[   54s] + rm -rf perl-WWW-Curl-4.05
[   54s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/perl-WWW-Curl-4.05.tar.bz2
[   54s] + /bin/tar -xvvf -
[   54s] drwxrwxr-x root/root         0 2013-07-01 18:58 perl-WWW-Curl-4.05/
[   54s] -rw-rw-r-- root/root     11915 2013-07-01 18:58 perl-WWW-Curl-4.05/Changes
[   54s] -rw-rw-r-- root/root     31779 2013-07-01 18:58 perl-WWW-Curl-4.05/Curl.xs
[   54s] -rw-rw-r-- root/root       255 2013-07-01 18:58 perl-WWW-Curl-4.05/LICENSE
[   54s] -rw-rw-r-- root/root       963 2013-07-01 18:58 perl-WWW-Curl-4.05/MANIFEST
[   54s] -rw-rw-r-- root/root       487 2013-07-01 18:58 perl-WWW-Curl-4.05/META.yml
[   54s] -rw-rw-r-- root/root      8543 2013-07-01 18:58 perl-WWW-Curl-4.05/Makefile.PL
[   54s] -rw-rw-r-- root/root      2475 2013-07-01 18:58 perl-WWW-Curl-4.05/README
[   54s] -rw-rw-r-- root/root       673 2013-07-01 18:58 perl-WWW-Curl-4.05/README.Win32
[   54s] -rw-rw-r-- root/root      4168 2013-07-01 18:58 perl-WWW-Curl-4.05/SIGNATURE
[   54s] drwxrwxr-x root/root         0 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/
[   54s] drwxrwxr-x root/root         0 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/
[   54s] -rw-rw-r-- root/root      8549 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install.pm
[   54s] drwxrwxr-x root/root         0 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install/
[   54s] -rw-rw-r-- root/root      1053 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install/Base.pm
[   54s] -rw-rw-r-- root/root      1788 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install/Can.pm
[   54s] -rw-rw-r-- root/root      1530 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install/External.pm
[   54s] -rw-rw-r-- root/root      1094 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install/MakeMaker.pm
[   54s] -rw-rw-r-- root/root      6225 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install/Makefile.pm
[   54s] -rw-rw-r-- root/root      9448 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install/Metadata.pm
[   54s] drwxrwxr-x root/root         0 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/
[   54s] drwxrwxr-x root/root         0 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/WWW/
[   54s] -rw-rw-r-- root/root     10200 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/WWW/Curl.pm
[   54s] drwxrwxr-x root/root         0 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/WWW/Curl/
[   54s] -rw-rw-r-- root/root      5242 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/WWW/Curl/Easy.pm
[   54s] -rw-rw-r-- root/root       187 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/WWW/Curl/Form.pm
[   54s] -rw-rw-r-- root/root       367 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/WWW/Curl/Multi.pm
[   54s] -rw-rw-r-- root/root      1018 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/WWW/Curl/Share.pm
[   54s] drwxrwxr-x root/root         0 2013-07-01 18:58 perl-WWW-Curl-4.05/packaging/
[   54s] -rw-rw-r-- root/root        69 2013-07-01 18:58 perl-WWW-Curl-4.05/packaging/perl-WWW-Curl.manifest
[   54s] -rw-rw-r-- root/root      3997 2013-07-01 18:58 perl-WWW-Curl-4.05/packaging/perl-WWW-Curl.spec
[   54s] drwxrwxr-x root/root         0 2013-07-01 18:58 perl-WWW-Curl-4.05/t/
[   54s] -rw-rw-r-- root/root       152 2013-07-01 18:58 perl-WWW-Curl-4.05/t/00constants.t
[   54s] -rw-rw-r-- root/root      1630 2013-07-01 18:58 perl-WWW-Curl-4.05/t/01basic.t
[   54s] -rw-rw-r-- root/root      1192 2013-07-01 18:58 perl-WWW-Curl-4.05/t/02callbacks.t
[   54s] -rw-rw-r-- root/root      1049 2013-07-01 18:58 perl-WWW-Curl-4.05/t/04abort-test.t
[   54s] -rw-rw-r-- root/root      1716 2013-07-01 18:58 perl-WWW-Curl-4.05/t/05progress.t
[   54s] -rw-rw-r-- root/root      1827 2013-07-01 18:58 perl-WWW-Curl-4.05/t/06http-post.t
[   54s] -rw-rw-r-- root/root      2103 2013-07-01 18:58 perl-WWW-Curl-4.05/t/07ftp-upload.t
[   54s] -rw-rw-r-- root/root      3243 2013-07-01 18:58 perl-WWW-Curl-4.05/t/08ssl.t
[   54s] -rw-rw-r-- root/root      1978 2013-07-01 18:58 perl-WWW-Curl-4.05/t/09times.t
[   54s] -rw-rw-r-- root/root      1284 2013-07-01 18:58 perl-WWW-Curl-4.05/t/10errbuf.t
[   54s] -rw-rw-r-- root/root      1133 2013-07-01 18:58 perl-WWW-Curl-4.05/t/13slowleak.t
[   54s] -rw-rw-r-- root/root      2178 2013-07-01 18:58 perl-WWW-Curl-4.05/t/14duphandle.t
[   54s] -rw-rw-r-- root/root      3153 2013-07-01 18:58 perl-WWW-Curl-4.05/t/15duphandle-callback.t
[   54s] -rw-rw-r-- root/root      2043 2013-07-01 18:58 perl-WWW-Curl-4.05/t/16formpost.t
[   54s] -rw-rw-r-- root/root      2236 2013-07-01 18:58 perl-WWW-Curl-4.05/t/17slist.t
[   54s] -rw-rw-r-- root/root      1547 2013-07-01 18:58 perl-WWW-Curl-4.05/t/18twinhandles.t
[   54s] -rw-rw-r-- root/root       134 2013-07-01 18:58 perl-WWW-Curl-4.05/t/meta.t
[   54s] drwxrwxr-x root/root         0 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/
[   54s] -rw-rw-r-- root/root        95 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/00constants.t
[   54s] -rw-rw-r-- root/root       407 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/01basic.t
[   54s] -rw-rw-r-- root/root       456 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/02header-callback.t
[   54s] -rw-rw-r-- root/root       454 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/03body-callback.t
[   54s] -rw-rw-r-- root/root       422 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/04abort.t
[   54s] -rw-rw-r-- root/root       668 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/05progress.t
[   54s] -rw-rw-r-- root/root       727 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/06http-post.t
[   54s] -rw-rw-r-- root/root       205 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/07errbuf.t
[   54s] -rw-rw-r-- root/root       443 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/08duphandle.t
[   54s] -rw-rw-r-- root/root       489 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/09duphandle-callback.t
[   54s] -rw-rw-r-- root/root      1269 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/10multi-callback.t
[   54s] -rw-rw-r-- root/root       381 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/README
[   54s] -rw-rw-r-- root/root       232 2013-07-01 18:58 perl-WWW-Curl-4.05/t/pod-coverage.t
[   54s] -rw-rw-r-- root/root       140 2013-07-01 18:58 perl-WWW-Curl-4.05/t/pod.t
[   54s] drwxrwxr-x root/root         0 2013-07-01 18:58 perl-WWW-Curl-4.05/template/
[   54s] -rw-rw-r-- root/root      1095 2013-07-01 18:58 perl-WWW-Curl-4.05/template/Easy.pm.tmpl
[   54s] -rw-rw-r-- root/root       763 2013-07-01 18:58 perl-WWW-Curl-4.05/template/Share.pm.tmpl
[   54s] -rw-rw-r-- root/root       110 2013-07-01 18:58 perl-WWW-Curl-4.05/typemap
[   54s] + STATUS=0
[   54s] + '[' 0 -ne 0 ']'
[   54s] + cd perl-WWW-Curl-4.05
[   54s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w .
[   54s] + cp /home/abuild/rpmbuild/SOURCES/perl-WWW-Curl.manifest .
[   54s] + chmod -R u+w /home/abuild/rpmbuild/BUILD/perl-WWW-Curl-4.05
[   54s] + exit 0
[   54s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.NXA1vC
[   54s] + umask 022
[   54s] + cd /home/abuild/rpmbuild/BUILD
[   54s] + cd perl-WWW-Curl-4.05
[   54s] ++ uname -m
[   54s] + [[ armv7l == \a\a\r\c\h\6\4 ]]
[   54s] + LANG=C
[   54s] + export LANG
[   54s] + unset DISPLAY
[   54s] + CFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -Wp,-D__SOFTFP__ -g'
[   54s] + export CFLAGS
[   54s] + CXXFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -Wp,-D__SOFTFP__ -g'
[   54s] + export CXXFLAGS
[   54s] + FFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -Wp,-D__SOFTFP__ -g -I%_fmoddir'
[   54s] + export FFLAGS
[   54s] + LD_AS_NEEDED=1
[   54s] + export LD_AS_NEEDED
[   54s] + grep -rsl '^#!.*perl' .
[   54s] + xargs --no-run-if-empty /bin/perl -MExtUtils::MakeMaker -e 'MY->fixin(@ARGV)'
[   54s] + grep -v '.bak$'
[   55s] + CFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -Wp,-D__SOFTFP__ -g'
[   55s] ++ /bin/perl -MExtUtils::MakeMaker -e ' print qq|PREFIX=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr| if $ExtUtils::MakeMaker::VERSION =~ /5\.9[1-6]|6\.0[0-5]/ '
[   55s] + /bin/perl Makefile.PL
[   57s] Locating required external dependency bin:curl-config... found at /bin/curl-config.
[   57s] Found curl.h in /usr/include/curl/curl.h
[   57s] Building curlopt-constants.c for your libcurl version
[   57s] Building Easy.pm constants for your libcurl version
[   57s] Building Share.pm constants for your libcurl version
[   58s] Checking if your kit is complete...
[   58s] Looks good
[   58s] Generating a Unix-style Makefile
[   58s] Writing Makefile for WWW::Curl
[   58s] Writing MYMETA.yml and MYMETA.json
[   58s] + /bin/make
[   62s] cp lib/WWW/Curl/Share.pm blib/lib/WWW/Curl/Share.pm
[   62s] AutoSplitting blib/lib/WWW/Curl/Share.pm (blib/lib/auto/WWW/Curl/Share)
[   62s] cp lib/WWW/Curl.pm blib/lib/WWW/Curl.pm
[   62s] cp lib/WWW/Curl/Multi.pm blib/lib/WWW/Curl/Multi.pm
[   62s] cp lib/WWW/Curl/Easy.pm blib/lib/WWW/Curl/Easy.pm
[   62s] AutoSplitting blib/lib/WWW/Curl/Easy.pm (blib/lib/auto/WWW/Curl/Easy)
[   62s] cp lib/WWW/Curl/Form.pm blib/lib/WWW/Curl/Form.pm
[   62s] Running Mkbootstrap for WWW::Curl ()
[   62s] chmod 644 Curl.bs
[   62s] /usr/bin/perl "-Iinc" /usr/lib/perl5/5.20.0/ExtUtils/xsubpp  -typemap /usr/lib/perl5/5.20.0/ExtUtils/typemap -typemap typemap  Curl.xs > Curl.xsc && mv Curl.xsc Curl.c
[   63s] cc -c  -I/usr/include -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -Wp,-D__SOFTFP__ -g -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -Wp,-D__SOFTFP__ -g -Wall -pipe   -DVERSION=\"4.05\" -DXS_VERSION=\"4.05\" -fPIC "-I/usr/lib/perl5/5.20.0/armv7l-linux-thread-multi/CORE"   Curl.c
[   63s] Curl.xs: In function 'fwrite_wrapper2':
[   63s] Curl.xs:341:13: warning: unused variable 'sv' [-Wunused-variable]
[   63s]          SV *sv;
[   63s]              ^
[   64s] In file included from Curl.xs:16:0:
[   64s] Curl.c: In function 'XS_WWW__Curl__Easy_init':
[   64s] /usr/lib/perl5/5.20.0/armv7l-linux-thread-multi/CORE/XSUB.h:183:20: warning: unused variable 'ix' [-Wunused-variable]
[   64s]  #define dXSI32 I32 ix = XSANY.any_i32
[   64s]                     ^
[   64s] Curl.c:747:5: note: in expansion of macro 'dXSI32'
[   64s]      dXSI32;
[   64s]      ^
[   64s] Curl.c: In function 'XS_WWW__Curl__Easy_version':
[   64s] /usr/lib/perl5/5.20.0/armv7l-linux-thread-multi/CORE/XSUB.h:164:20: warning: unused variable 'items' [-Wunused-variable]
[   64s]  #define dITEMS I32 items = (I32)(SP - MARK)
[   64s]                     ^
[   64s] /usr/lib/perl5/5.20.0/armv7l-linux-thread-multi/CORE/XSUB.h:172:16: note: in expansion of macro 'dITEMS'
[   64s]   dSP; dAXMARK; dITEMS
[   64s]                 ^
[   64s] Curl.c:865:11: note: in expansion of macro 'dXSARGS'
[   64s]      dVAR; dXSARGS;
[   64s]            ^
[   64s] Curl.c: In function 'XS_WWW__Curl__Easy_internal_setopt':
[   64s] Curl.c:1064:6: warning: unused variable 'value' [-Wunused-variable]
[   64s]   int value = (int)SvIV(ST(2))
[   64s]       ^
[   64s] Curl.c:1062:6: warning: unused variable 'option' [-Wunused-variable]
[   64s]   int option = (int)SvIV(ST(1))
[   64s]       ^
[   64s] Curl.c:1061:18: warning: variable 'self' set but not used [-Wunused-but-set-variable]
[   64s]   WWW__Curl__Easy self;
[   64s]                   ^
[   64s] Curl.c: In function 'XS_WWW__Curl__Easy_cleanup':
[   64s] Curl.c:1220:18: warning: variable 'self' set but not used [-Wunused-but-set-variable]
[   64s]   WWW__Curl__Easy self;
[   64s]                   ^
[   64s] Curl.c: In function 'XS_WWW__Curl__Easy_strerror':
[   64s] Curl.c:1291:18: warning: variable 'self' set but not used [-Wunused-but-set-variable]
[   64s]   WWW__Curl__Easy self;
[   64s]                   ^
[   64s] Curl.c: In function 'XS_WWW__Curl__Form_add':
[   64s] Curl.c:1364:9: warning: unused variable 'value' [-Wunused-variable]
[   64s]   char * value = (char *)SvPV_nolen(ST(2))
[   64s]          ^
[   64s] Curl.c:1362:9: warning: unused variable 'name' [-Wunused-variable]
[   64s]   char * name = (char *)SvPV_nolen(ST(1))
[   64s]          ^
[   64s] Curl.c:1361:18: warning: variable 'self' set but not used [-Wunused-but-set-variable]
[   64s]   WWW__Curl__Form self;
[   64s]                   ^
[   64s] Curl.c: In function 'XS_WWW__Curl__Form_addfile':
[   64s] Curl.c:1401:9: warning: unused variable 'type' [-Wunused-variable]
[   64s]   char * type = (char *)SvPV_nolen(ST(3))
[   64s]          ^
[   64s] Curl.c:1399:9: warning: unused variable 'description' [-Wunused-variable]
[   64s]   char * description = (char *)SvPV_nolen(ST(2))
[   64s]          ^
[   64s] Curl.c:1397:9: warning: unused variable 'filename' [-Wunused-variable]
[   64s]   char * filename = (char *)SvPV_nolen(ST(1))
[   64s]          ^
[   64s] Curl.c:1396:18: warning: variable 'self' set but not used [-Wunused-but-set-variable]
[   64s]   WWW__Curl__Form self;
[   64s]                   ^
[   64s] Curl.c: In function 'XS_WWW__Curl__Multi_strerror':
[   64s] Curl.c:1706:19: warning: variable 'self' set but not used [-Wunused-but-set-variable]
[   64s]   WWW__Curl__Multi self;
[   64s]                    ^
[   64s] Curl.c: In function 'XS_WWW__Curl__Share_strerror':
[   64s] Curl.c:1874:19: warning: variable 'self' set but not used [-Wunused-but-set-variable]
[   64s]   WWW__Curl__Share self;
[   64s]                    ^
[   65s] rm -f blib/arch/auto/WWW/Curl/Curl.so
[   65s] LD_RUN_PATH="/lib" cc  -shared -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -Wp,-D__SOFTFP__ -g -Wall -pipe Curl.o  -o blib/arch/auto/WWW/Curl/Curl.so 	\
[   65s]    -lcurl -lcares -lidn -lssl -lcrypto -lssl -lcrypto -lz  	\
[   65s]   
[   65s] chmod 755 blib/arch/auto/WWW/Curl/Curl.so
[   65s] /usr/bin/perl "-Iinc" -MExtUtils::Command::MM -e 'cp_nonempty' -- Curl.bs blib/arch/auto/WWW/Curl/Curl.bs 644
[   66s] Manifying blib/man3/WWW::Curl.3pm
[   66s] + exit 0
[   66s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.flYexI
[   66s] + umask 022
[   66s] + cd /home/abuild/rpmbuild/BUILD
[   66s] + cd perl-WWW-Curl-4.05
[   66s] + LANG=C
[   66s] + export LANG
[   66s] + unset DISPLAY
[   66s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm
[   66s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm
[   66s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm '!=' / ']'
[   66s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm
[   66s] ++ /bin/perl -MExtUtils::MakeMaker -e ' print $ExtUtils::MakeMaker::VERSION <= 6.05 ? qq|PREFIX=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr| : qq|DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm| '
[   67s] + /bin/make prefix=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr exec_prefix=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr bindir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/bin sbindir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/sbin sysconfdir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/etc datadir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/share includedir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/include libdir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/lib libexecdir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/libexec localstatedir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/var sharedstatedir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/com mandir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/share/man infodir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/share/info install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm
[   67s] Running Mkbootstrap for WWW::Curl ()
[   67s] chmod 644 Curl.bs
[   68s] Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
[   69s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Curl.so
[   69s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Easy/autosplit.ix
[   69s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Share/autosplit.ix
[   69s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl.pm
[   69s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Multi.pm
[   69s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Easy.pm
[   69s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Form.pm
[   69s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Share.pm
[   69s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/share/man/man3/WWW::Curl.3pm
[   69s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/lib/perl5/5.20.0/armv7l-linux-thread-multi/perllocal.pod
[   69s] + cmd=/usr/share/spec-helper/compress_files
[   69s] + '[' -x /usr/share/spec-helper/compress_files ']'
[   69s] + cmd=/usr/lib/rpm/brp-compress
[   69s] + '[' -x /usr/lib/rpm/brp-compress ']'
[   69s] + /usr/lib/rpm/brp-compress
[   69s] + '[' -e /etc/SuSE-release -o -e /etc/UnitedLinux-release ']'
[   69s] + find /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm -name perllocal.pod -o -name .packlist -o -name '*.bs'
[   69s] + xargs -i rm -f '{}'
[   69s] + find /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr -type d -depth -exec rmdir '{}' ';'
[   69s] + /bin/perl -MFile::Find -le '
[   69s]     find({ wanted => \&wanted, no_chdir => 1}, "/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm");
[   69s]     print "%doc  README.Win32 template inc Changes README LICENSE";
[   69s]     for my $x (sort @dirs, @files) {
[   69s]         push @ret, $x unless indirs($x);
[   69s]         }
[   69s]     print join "\n", sort @ret;
[   69s] 
[   69s]     sub wanted {
[   69s]         return if /auto$/;
[   69s] 
[   69s]         local $_ = $File::Find::name;
[   69s]         my $f = $_; s|^\Q/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm\E||;
[   69s]         return unless length;
[   69s]         return $files[@files] = $_ if -f $f;
[   69s] 
[   69s]         $d = $_;
[   69s]         /\Q$d\E/ && return for reverse sort @INC;
[   69s]         $d =~ /\Q$_\E/ && return
[   69s]             for qw|/etc /usr/man /usr/bin /usr/share|;
[   69s] 
[   69s]         $dirs[@dirs] = $_;
[   69s]         }
[   69s] 
[   69s]     sub indirs {
[   69s]         my $x = shift;
[   69s]         $x =~ /^\Q$_\E\// && $x ne $_ && return 1 for @dirs;
[   69s]         }
[   69s]     '
[   70s] + '[' -z WWW-Curl-4.05-filelist ']'
[   70s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/perl-WWW-Curl-4.05
[   70s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Curl.so
[   70s] cpio: gcc-4.9.2/libgcc/config/arm/lib1funcs.S: Cannot stat: No such file or directory
[   70s] cpio: gcc-4.9.2/obj-armv7l-tizen-linux-gnueabi/armv7l-tizen-linux-gnueabi/libgcc: Cannot stat: No such file or directory
[   70s] cpio: glibc-2.21/csu: Cannot stat: No such file or directory
[   70s] cpio: glibc-2.21/sysdeps/arm/crti.S: Cannot stat: No such file or directory
[   70s] cpio: glibc-2.21/sysdeps/arm/crtn.S: Cannot stat: No such file or directory
[   70s] 217 blocks
[   70s] + /usr/lib/rpm/brp-compress
[   70s] + /usr/lib/rpm/brp-tizen
[   70s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm
[   70s] Processing files: perl-WWW-Curl-4.05-5.2.armv7l
[   70s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv
[   70s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K
[   70s] 
[   70s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.V3Phs4
[   70s] + umask 022
[   70s] + cd /home/abuild/rpmbuild/BUILD
[   70s] + cd perl-WWW-Curl-4.05
[   70s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/share/doc/packages/perl-WWW-Curl
[   70s] + export DOCDIR
[   70s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/share/doc/packages/perl-WWW-Curl
[   70s] + cp -pr README.Win32 /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/share/doc/packages/perl-WWW-Curl
[   70s] + cp -pr template /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/share/doc/packages/perl-WWW-Curl
[   70s] + cp -pr inc /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/share/doc/packages/perl-WWW-Curl
[   70s] + cp -pr Changes /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/share/doc/packages/perl-WWW-Curl
[   70s] + cp -pr README /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/share/doc/packages/perl-WWW-Curl
[   70s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm/usr/share/doc/packages/perl-WWW-Curl
[   70s] + exit 0
[   72s] Provides: Curl.so perl(Module::Install) = 0.75 perl(Module::Install::Base) = 0.75 perl(Module::Install::Base::FakeAdmin) perl(Module::Install::Can) = 0.75 perl(Module::Install::External) = 0.75 perl(Module::Install::MakeMaker) = 0.75 perl(Module::Install::Makefile) = 0.75 perl(Module::Install::Metadata) = 0.75 perl(WWW::Curl) = 4.05 perl(WWW::Curl::Easy) = 4.05 perl(WWW::Curl::Form) perl(WWW::Curl::Multi) perl(WWW::Curl::Share) perl-WWW-Curl = 4.05-5.2 perl-WWW-Curl(armv7l-32) = 4.05-5.2
[   72s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
[   72s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libcares.so.2 libcrypto.so.1.0.0 libcurl.so.4 libcurl.so.4(CURL_OPENSSL_4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libidn.so.11 libssl.so.1.0.0 libz.so.1
[   72s] Processing files: perl-WWW-Curl-debugsource-4.05-5.2.armv7l
[   72s] Provides: perl-WWW-Curl-debugsource = 4.05-5.2 perl-WWW-Curl-debugsource(armv7l-32) = 4.05-5.2
[   72s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1
[   72s] Processing files: perl-WWW-Curl-debuginfo-4.05-5.2.armv7l
[   72s] Provides: debuginfo(build-id) = 7a5e21964f76e22f3754bc7e690557cb8b270b20
[   72s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
[   72s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm
[   72s] warning: Could not canonicalize hostname: w18
[   72s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-WWW-Curl-4.05-5.2.src.rpm
[   72s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-WWW-Curl-4.05-5.2.armv7l.rpm
[   72s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-WWW-Curl-debugsource-4.05-5.2.armv7l.rpm
[   72s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-WWW-Curl-debuginfo-4.05-5.2.armv7l.rpm
[   72s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.9SoY0j
[   72s] + umask 022
[   72s] + cd /home/abuild/rpmbuild/BUILD
[   72s] + cd perl-WWW-Curl-4.05
[   72s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm
[   72s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm '!=' / ']'
[   72s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.2.arm
[   72s] + exit 0
[   72s] ... checking for files with abuild user/group
[   72s] 
[   72s] RPMLINT report:
[   72s] ===============
[   72s] qemu: Unsupported syscall: 311
[   79s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl.pm is not allowed in Tizen
[   79s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Share is not allowed in Tizen
[   79s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Curl.so is not allowed in Tizen
[   79s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Form.pm is not allowed in Tizen
[   79s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl is not allowed in Tizen
[   79s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Easy is not allowed in Tizen
[   79s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Multi.pm is not allowed in Tizen
[   79s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Easy/autosplit.ix is not allowed in Tizen
[   79s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl is not allowed in Tizen
[   79s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW is not allowed in Tizen
[   79s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Easy.pm is not allowed in Tizen
[   79s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Share/autosplit.ix is not allowed in Tizen
[   79s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Share.pm is not allowed in Tizen
[   79s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW is not allowed in Tizen
[   79s] perl files installed a non-vendor installed path,
[   79s] which is not allowed in SUSE.
[   79s] 
[   79s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl.pm
[   79s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Share
[   79s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Curl.so
[   79s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Form.pm
[   79s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl
[   79s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Easy
[   79s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Multi.pm
[   79s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Easy/autosplit.ix
[   79s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl
[   79s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW
[   79s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Easy.pm
[   79s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Share/autosplit.ix
[   79s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Share.pm
[   79s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW
[   79s] This perl module package installs files under the subdirectory site_perl,
[   79s] while they must appear under vendor_perl.
[   79s] 
[   79s] perl-WWW-Curl.src:56: W: rpm-buildroot-usage %build %{__perl} Makefile.PL `%{__perl} -MExtUtils::MakeMaker -e ' print qq|PREFIX=%{buildroot}%{_prefix}| if \$ExtUtils::MakeMaker::VERSION =~ /5\.9[1-6]|6\.0[0-5]/ '`
[   79s] $RPM_BUILD_ROOT should not be touched during %build or %prep stage, as it may
[   79s] break short circuit builds.
[   79s] 
[   79s] perl-WWW-Curl.armv7l: E: non-standard-group (Badness: 200) Applications/CPAN
[   79s] perl-WWW-Curl.src: E: non-standard-group (Badness: 200) Applications/CPAN
[   79s] The value of the Group tag in the package is not valid.  Valid groups are
[   79s] listed here: https://wiki.tizen.org/wiki/Packaging/Guidelines#Group_Tag
[   79s] 
[   79s] perl-WWW-Curl.armv7l: W: non-linux-readme /usr/share/doc/packages/perl-WWW-Curl/README.Win32
[   79s] Your package contains a file that contains instructions for non-linux
[   79s] platforms. They're most likely unneccessary bloat,  consider removing them
[   79s] from your package.
[   79s] 
[   79s] perl-WWW-Curl.src:59: W: make-check-outside-check-section %{__make} test
[   79s] Make check or other automated regression test should be run in %check, as they
[   79s] can be disabled with a rpm macro for short circuiting purposes.
[   79s] 
[   79s] perl-WWW-Curl.armv7l: E: license-file-in-docs (Badness: 200) /usr/share/doc/packages/perl-WWW-Curl/LICENSE
[   79s] A file whose name suggests that it contains a license is included in the
[   79s] package as a document. Such files need to be marked with %license and not with
[   79s] %doc, which will install them in a special directory seperated from the
[   79s] documentation.
[   79s] 
[   79s] perl-WWW-Curl.armv7l: E: invalid-license (Badness: 200) Artistic
[   79s] perl-WWW-Curl.src: E: invalid-license (Badness: 200) Artistic
[   79s] The specified license string is not recognized. Please refer to
[   79s] http://spdx.org/licenses/ for the list of known licences and their exact
[   79s] spelling.
[   79s] 
[   79s] perl-WWW-Curl.src:20: W: hardcoded-packager-tag Arix
[   79s] The Packager tag is hardcoded in your spec file. It should be removed, so as
[   79s] to use rebuilder's own defaults.
[   79s] 
[   79s] perl-WWW-Curl.armv7l: W: explicit-lib-dependency libcurl
[   79s] You must let rpm find the library dependencies by itself. Do not put unneeded
[   79s] explicit Requires: tags.
[   79s] 
[   79s] 2 packages and 0 specfiles checked; 5 errors, 33 warnings.
[   79s] 
[   79s] ... creating baselibs
[   79s] qemu: Unsupported syscall: 311
[   80s] ... comparing built packages with the former built
[   80s] /usr/lib/build/pkg-diff.sh
[   80s] compare /.build.oldpackages/perl-WWW-Curl-4.05-5.1.src.rpm /home/abuild/rpmbuild/SRPMS/perl-WWW-Curl-4.05-5.2.src.rpm
[   80s] comparing rpmtags
[   80s] comparing RELEASE
[   80s] comparing PROVIDES
[   80s] comparing scripts
[   80s] comparing filelist
[   80s] comparing file checksum
[   80s] RPM meta information is identical
[   80s] compare /.build.oldpackages/perl-WWW-Curl-4.05-5.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/perl-WWW-Curl-4.05-5.2.armv7l.rpm
[   81s] Comparing perl-WWW-Curl-4.05-5.1.armv7l.rpm to perl-WWW-Curl-4.05-5.2.armv7l.rpm
[   81s] comparing rpmtags
[   81s] comparing RELEASE
[   81s] comparing PROVIDES
[   81s] comparing scripts
[   81s] comparing filelist
[   81s] comparing file checksum
[   81s] creating rename script
[   81s] RPM file checksum differs.
[   81s] Extracting packages
[   82s] /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Curl.so differs in ELF section .comment
[   82s] --- /tmp/tmp.uD3pzszkHU/tmp.JqQoZppafJ	2015-06-23 17:10:49.000000000 +0000
[   82s] +++ /tmp/tmp.uD3pzszkHU/tmp.7Pm8cjEjkx	2015-06-23 17:10:49.000000000 +0000
[   82s] @@ -3,4 +3,4 @@
[   82s]  
[   82s]  Contents of section .comment:
[   82s]   0000 4743433a 20285469 7a656e29 20342e39  GCC: (Tizen) 4.9
[   82s] - 0010 00                                   .               
[   82s] + 0010 2e3200                               .2.             
[   82s] compare /.build.oldpackages/perl-WWW-Curl-debuginfo-4.05-5.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/perl-WWW-Curl-debuginfo-4.05-5.2.armv7l.rpm
[   82s] skipping -debuginfo package
[   82s] compare /.build.oldpackages/perl-WWW-Curl-debugsource-4.05-5.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/perl-WWW-Curl-debugsource-4.05-5.2.armv7l.rpm
[   82s] Comparing perl-WWW-Curl-debugsource-4.05-5.1.armv7l.rpm to perl-WWW-Curl-debugsource-4.05-5.2.armv7l.rpm
[   82s] comparing rpmtags
[   82s] comparing RELEASE
[   82s] comparing PROVIDES
[   83s] comparing scripts
[   83s] comparing filelist
[   83s] comparing file checksum
[   83s] creating rename script
[   83s] RPM meta information is identical
[   83s] comparing /.build.oldpackages/rpmlint.log and /home/abuild/rpmbuild/OTHER/rpmlint.log
[   83s] ... saving built statistics
[   83s] ... saving built packages
[   83s] /home/abuild/rpmbuild/RPMS/armv7l/perl-WWW-Curl-4.05-5.2.armv7l.rpm
[   83s] /home/abuild/rpmbuild/RPMS/armv7l/perl-WWW-Curl-debuginfo-4.05-5.2.armv7l.rpm
[   83s] /home/abuild/rpmbuild/RPMS/armv7l/perl-WWW-Curl-debugsource-4.05-5.2.armv7l.rpm
[   83s] /home/abuild/rpmbuild/SRPMS/perl-WWW-Curl-4.05-5.2.src.rpm
[   83s] /home/abuild/rpmbuild/OTHER/_statistics
[   83s] /home/abuild/rpmbuild/OTHER/rpmlint.log
[   83s] 
[   83s] w18 finished "build perl-WWW-Curl.spec" at Tue Jun 23 17:10:51 UTC 2015.
[   83s] 
[   86s] [   69.253154] SysRq : Power Off
[   86s] [   69.364272] Power down.
[   86s] build: extracting built packages...
[   86s] perl-WWW-Curl-4.05-5.2.armv7l.rpm
[   86s] perl-WWW-Curl-debuginfo-4.05-5.2.armv7l.rpm
[   86s] perl-WWW-Curl-debugsource-4.05-5.2.armv7l.rpm
[   86s] perl-WWW-Curl-4.05-5.2.src.rpm
[   86s] _statistics
[   86s] rpmlint.log