[ 0s] Using BUILD_ROOT=/srv/build/root_2/.mount [ 0s] Using BUILD_ARCH=aarch64 [ 0s] Doing kvm build in /srv/build/root_2/root [ 0s] [ 0s] [ 0s] w23 started "build _service:gbs:xproto.spec" at Tue Jun 16 00:39:21 UTC 2015. [ 0s] [ 0s] Building xproto for project 'Tizen:3.0.2015.Q2:Common' repository 'arm64-x11' arch 'aarch64' srcmd5 '0ca56b3f409314e839f7e307ab37e714' [ 0s] [ 0s] processing specfile /srv/build/root_2/.build-srcdir/_service:gbs:xproto.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_2/.build-srcdir/_service:gbs:xproto.spec [ 1s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_2/.build.rpmlist /srv/build/root_2/.build-srcdir/_service:gbs:xproto.spec build rpmlint-Factory ... [ 1s] registering binfmt handlers for VM [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 1s] [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/39] preinstalling libmagic-data... [ 1s] [2/39] preinstalling setup... [ 1s] [3/39] preinstalling filesystem... [ 1s] [4/39] preinstalling glibc... [ 2s] [5/39] preinstalling bash... [ 2s] [6/39] preinstalling diffutils... [ 2s] [7/39] preinstalling libattr... [ 2s] [8/39] preinstalling libbz2... [ 2s] [9/39] preinstalling libelf... [ 2s] [10/39] preinstalling libfreebl3... [ 2s] [11/39] preinstalling libgcc_s1... [ 2s] [12/39] preinstalling liblua... [ 2s] [13/39] preinstalling liblzma... [ 2s] [14/39] preinstalling libncurses... [ 2s] [15/39] preinstalling libpopt... [ 2s] [16/39] preinstalling libsmack... [ 2s] [17/39] preinstalling libsqlite... [ 2s] [18/39] preinstalling libuuid... [ 2s] [19/39] preinstalling nspr... [ 2s] [20/39] preinstalling sed... [ 2s] [21/39] preinstalling tar... [ 2s] [22/39] preinstalling zlib... [ 2s] [23/39] preinstalling qemu-accel-aarch64-cross-aarch64... [ 6s] [24/39] preinstalling qemu-linux-user-cross-arm... [ 7s] [25/39] preinstalling grep... [ 7s] [26/39] preinstalling libacl... [ 7s] [27/39] preinstalling libblkid... [ 7s] [28/39] preinstalling libcap... [ 7s] [29/39] preinstalling libreadline... [ 7s] [30/39] preinstalling smack... [ 7s] [31/39] preinstalling bzip2... [ 7s] [32/39] preinstalling libmagic... [ 7s] [33/39] preinstalling libxml2... [ 7s] [34/39] preinstalling libmount... [ 7s] [35/39] preinstalling coreutils... [ 7s] [36/39] preinstalling util-linux... [ 7s] [37/39] preinstalling nss... [ 7s] [38/39] preinstalling libsoftokn3... [ 7s] [39/39] preinstalling rpm... [ 8s] [ 8s] [1/9] preinstalling libext2fs... [ 8s] [2/9] preinstalling libpcre... [ 8s] [3/9] preinstalling libsmartcols... [ 8s] [4/9] preinstalling libuuid... [ 8s] [5/9] preinstalling perl... [ 8s] [6/9] preinstalling grep... [ 8s] [7/9] preinstalling libblkid... [ 8s] [8/9] preinstalling libmount... [ 9s] [9/9] preinstalling util-linux... [ 9s] copying packages... [ 9s] reordering...cycle: gcc49-locale -> gcc49 [ 9s] breaking dependency gcc49 -> gcc49-locale [ 9s] cycle: coreutils -> pam [ 9s] breaking dependency pam -> coreutils [ 9s] cycle: nss -> libsoftokn3 [ 9s] breaking dependency nss -> libsoftokn3 [ 9s] done [ 27s] booting kvm ... [ 27s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 8000 -drive file=/srv/build/root_2/root,if=virtio,cache=none -drive file=/srv/build/root_2/root,if=ide,index=0,cache=none -drive file=/srv/build/root_2/swap,if=virtio,cache=none -smp 4 [ 30s] doing fast boot [ 31s] Creating device nodes with udev [ 35s] Waiting for device /dev/vda to appear: ok [ 35s] fsck from util-linux 2.21.2 [ 35s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 36s] /dev/vda: clean, 4705/2392064 files, 277056/9568256 blocks [ 36s] fsck succeeded. Mounting root device read-write. [ 36s] Mounting root /dev/vda [ 36s] mount -o rw -t ext4 /dev/vda /root [ 43s] replacing /etc/mtab with symlink to /proc/self/mounts [ 64s] [ 34.373127] qemu-arm64[1]: segfault at 4000800500 ip 000000006066bf50 sp 00007fffe70cb0d0 error 7 [ 65s] 2nd stage started in virtual machine [ 65s] machine type: aarch64 [ 68s] swapon /dev/vdb [ 68s] swapon: /dev/vdb: found swap signature: version 1d, page-size 4, same byte order [ 68s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 69s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 72s] mount: none is already mounted or /proc busy [ 72s] mount: none is already mounted or /dev/pts busy [ 72s] logging output to //.build.log... [ 73s] processing specfile /.build-srcdir/_service:gbs:xproto.spec ... [ 73s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:xproto.spec build rpmlint-Factory ... [ 81s] running qemu-accel-aarch64-cross-aarch64 postinstall script [ 82s] + builtin echo 'Starting qemu post script' [ 82s] Starting qemu post script [ 82s] ++ uname -m [ 82s] + '[' aarch64 = aarch64 ']' [ 82s] + builtin echo aarch64 arch [ 82s] aarch64 arch [ 82s] + ln -sf '%{our_path}/lib/libnsl.so.1' /lib/libnsl.so.1 [ 82s] + '[' '!' -d /proc/sys/fs/binfmt_misc ']' [ 82s] + did_mount_it= [ 82s] + '[' '!' -f /proc/sys/fs/binfmt_misc/register ']' [ 82s] + '[' -e /proc/sys/fs/binfmt_misc/aarch64 ']' [ 82s] + builtin echo Unregistering accelerated handler [ 82s] Unregistering accelerated handler [ 82s] + builtin echo -1 [ 82s] + '[' '!' -e /proc/sys/fs/binfmt_misc/aarch64 ']' [ 82s] + builtin echo Registering right binfmt handler [ 82s] Registering right binfmt handler [ 82s] + builtin echo ':aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/qemu/qemu-aarch64-binfmt:P' [ 82s] + cat /proc/sys/fs/binfmt_misc/aarch64 [ 82s] + sed -e 's/mask/mask /' [ 85s] enabled [ 85s] interpreter /qemu/qemu-aarch64-binfmt [ 85s] flags: P [ 85s] offset 0 [ 85s] magic 7f454c460201010000000000000000000200b7 [ 85s] mask ffffffffffffff00fffffffffffffffffeffff [ 85s] + '[' -n ']' [ 85s] + builtin echo 'Unmounting again.' [ 85s] Unmounting again. [ 85s] + umount /proc/sys/fs/binfmt_misc [ 88s] + ls /qemu [ 88s] + read f [ 88s] + '[' -f /usr/bin/qemu-aarch64 ']' [ 88s] + builtin echo /usr/bin/qemu-aarch64 already 'presents!' [ 88s] /usr/bin/qemu-aarch64 already presents! [ 88s] + read f [ 88s] + '[' -f /usr/bin/qemu-aarch64-binfmt ']' [ 88s] + builtin echo /usr/bin/qemu-aarch64-binfmt already 'presents!' [ 88s] /usr/bin/qemu-aarch64-binfmt already presents! [ 88s] + read f [ 88s] + '[' -f /usr/bin/qemu-arm64 ']' [ 88s] + builtin echo /usr/bin/qemu-arm64 already 'presents!' [ 88s] /usr/bin/qemu-arm64 already presents! [ 88s] + read f [ 88s] + '[' -f /usr/bin/qemu-arm64-binfmt ']' [ 88s] + builtin echo /usr/bin/qemu-arm64-binfmt already 'presents!' [ 88s] /usr/bin/qemu-arm64-binfmt already presents! [ 88s] + read f [ 88s] + echo All done [ 88s] All done [ 88s] + echo 0 [ 88s] + '[' -f /usr/bin/gcc ']' [ 89s] running setup postinstall script [ 92s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 92s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 92s] initializing rpm db... [ 127s] [1/100] installing libmagic-data-5.18-8.3 [ 127s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 127s] [2/100] installing libstdc++-locale-4.9.2-10.7 [ 127s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 127s] [3/100] installing setup-0.9-8.6 [ 130s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 131s] [4/100] installing terminfo-base-5.9-6.3 [ 133s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 137s] [5/100] installing filesystem-3.1-9.2 [ 143s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 143s] [6/100] installing glibc-2.21-8.13 [ 144s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 144s] [7/100] installing bash-4.3.30-14.7 [ 145s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 145s] [8/100] installing cpio-2.11-5.7 [ 145s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 145s] [9/100] installing diffutils-3.3-5.6 [ 145s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 145s] [10/100] installing findutils-4.5.14-7.3 [ 146s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 146s] [11/100] installing gawk-4.1.1-5.7 [ 146s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 146s] [12/100] installing hostname-3.12-4.6 [ 146s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 147s] [13/100] installing libatomic-4.9.2-10.7 [ 147s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 147s] [14/100] installing libattr-2.4.47-8.3 [ 147s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 147s] [15/100] installing libbz2-1.0.6-6.6 [ 148s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 148s] [16/100] installing libelf-0.160-5.21 [ 148s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 148s] [17/100] installing libext2fs-1.42.11-7.10 [ 149s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 149s] [18/100] installing libfreebl3-3.17.2-12.19 [ 149s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 149s] [19/100] installing libgcc_s1-4.9.2-10.7 [ 150s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 150s] [20/100] installing libgdbm-1.11-8.2 [ 150s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 150s] [21/100] installing libgmp-6.0.0-7.2 [ 151s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 151s] [22/100] installing libgomp-4.9.2-10.7 [ 151s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 151s] [23/100] installing libitm-4.9.2-10.7 [ 152s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 152s] [24/100] installing libltdl-2.4.2-6.3 [ 153s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 153s] [25/100] installing liblua-5.1.4-8.1 [ 153s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 154s] [26/100] installing liblzma-5.1.3-7.3 [ 154s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 154s] [27/100] installing libpcre-8.31-4.7 [ 156s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 157s] [28/100] installing libpopt-1.16-5.4 [ 158s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 158s] [29/100] installing libsmack-1.1.0-11.3 [ 158s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 159s] [30/100] installing libsmartcols-2.25.2-8.1 [ 159s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 159s] [31/100] installing libsqlite-3.7.14-10.2 [ 160s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 160s] [32/100] installing libuuid-2.25.2-8.1 [ 160s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 160s] [33/100] installing m4-1.4.17-5.2 [ 160s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 160s] [34/100] installing net-tools-2.0_20121208git-5.3 [ 160s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 161s] [35/100] installing nspr-4.10.7-8.5 [ 161s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 161s] [36/100] installing patch-2.7-5.3 [ 161s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 161s] [37/100] installing pkg-config-0.28-6.3 [ 161s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 161s] [38/100] installing sed-4.2.2-5.3 [ 162s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 162s] [39/100] installing tar-1.27-4.7 [ 162s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 162s] [40/100] installing update-alternatives-1.16.3-5.6 [ 163s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 163s] [41/100] installing which-2.20-4.7 [ 163s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 163s] [42/100] installing zlib-1.2.8-7.3 [ 163s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 163s] [43/100] installing libncurses-5.9-6.3 [ 163s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 163s] [44/100] installing build-compare-2015.04.28-8.2 [ 163s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 164s] [45/100] installing gcc49-info-4.9.2-10.7 [ 164s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 164s] [46/100] installing qemu-linux-user-cross-arm-2.2.0-9.3 [ 165s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 165s] [47/100] installing util-macros-1.17-6.1 [ 165s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 165s] [48/100] installing less-466-5.3 [ 165s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 166s] [49/100] installing libacl-2.2.52-8.3 [ 166s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 166s] [50/100] installing libasm-0.160-5.21 [ 166s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 166s] [51/100] installing libblkid-2.25.2-8.1 [ 166s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 166s] [52/100] installing libcap-2.24-7.4 [ 167s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 167s] [53/100] installing libmpfr-3.1.2-7.2 [ 167s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 167s] [54/100] installing libreadline-5.2-6.1 [ 167s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 167s] [55/100] installing make-4.0-8.1 [ 167s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 167s] [56/100] installing nss-certs-3.17.2-12.19 [ 168s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 168s] [57/100] installing smack-1.1.0-11.3 [ 168s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 168s] [58/100] installing bzip2-1.0.6-6.6 [ 168s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 168s] [59/100] installing grep-2.19-5.2 [ 168s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 168s] [60/100] installing libmagic-5.18-8.3 [ 168s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 168s] [61/100] installing libstdc++-4.9.2-10.7 [ 168s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 168s] [62/100] installing libxml2-2.8.0-8.2 [ 168s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 168s] [63/100] installing xz-5.1.3-7.3 [ 168s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 169s] [64/100] installing binutils-2.25-14.5 [ 169s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 169s] update-alternatives: using /usr/bin/ld.bfd to provide /usr/bin/ld (ld) in auto mode. [ 169s] [65/100] installing libdw-0.160-5.21 [ 170s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 170s] [66/100] installing db4-4.8.30.NC-6.3 [ 170s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 170s] [67/100] installing file-5.18-8.3 [ 170s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 170s] [68/100] installing libmount-2.25.2-8.1 [ 170s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 170s] [69/100] installing libmpc-1.0-5.3 [ 170s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 171s] [70/100] installing binutils-gold-2.25-14.5 [ 171s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 171s] update-alternatives: using /usr/bin/ld.gold to provide /usr/bin/ld (ld) in auto mode. [ 171s] [71/100] installing elfutils-0.160-5.21 [ 171s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 171s] [72/100] installing cpp49-4.9.2-10.7 [ 172s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 172s] [73/100] installing perl-5.20.0-7.2 [ 182s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 182s] [74/100] installing build-mkbaselibs-20120927-6.2 [ 182s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 182s] [75/100] installing cpp-4.9-8.1 [ 182s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 182s] [76/100] installing autoconf-2.69-7.1 [ 182s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 182s] [77/100] installing build-20120927-6.2 [ 183s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 183s] [78/100] installing pam-1.1.6-8.2 [ 183s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 184s] [79/100] installing nss-3.17.2-12.19 [ 184s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 184s] [80/100] installing libsoftokn3-3.17.2-12.19 [ 185s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 185s] [81/100] installing coreutils-8.21-7.2 [ 188s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 188s] [82/100] installing util-linux-2.25.2-8.1 [ 188s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 189s] [83/100] installing rpm-4.11.0.1-29.2 [ 199s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 200s] [84/100] installing linux-glibc-devel-3.10-7.1 [ 203s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 206s] [85/100] installing glibc-locale-2.21-8.13 [ 214s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 214s] [86/100] installing gzip-1.6-6.3 [ 215s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 215s] [87/100] installing automake-1.14.1-7.2 [ 215s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 215s] [88/100] installing tzdata-2014h-5.3 [ 216s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 216s] [89/100] installing rpmlint-mini-1.5-8.24 [ 216s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 216s] [90/100] installing rpmlint-tizen-1.0-4.2 [ 216s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 217s] [91/100] installing glibc-devel-2.21-8.13 [ 217s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 217s] [92/100] installing libtool-2.4.2-6.3 [ 217s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 217s] [93/100] installing libstdc++49-devel-4.9.2-10.7 [ 218s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 218s] [94/100] installing gcc49-4.9.2-10.7 [ 220s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 220s] update-alternatives: using /usr/lib64/gcc/aarch64-tizen-linux/4.9/liblto_plugin.so to provide /usr/bin/../lib/bfd-plugins/liblto_plugin_aarch64.so (liblto_plugin_aarch64.so) in auto mode. [ 220s] [95/100] installing gcc49-locale-4.9.2-10.7 [ 221s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 222s] [96/100] installing gcc-4.9-8.1 [ 222s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 222s] [97/100] installing gcc49-c++-4.9.2-10.7 [ 223s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 223s] [98/100] installing gcc-c++-4.9-8.1 [ 223s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 223s] [99/100] installing qemu-accel-aarch64-cross-aarch64-0.4-15.3 [ 256s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 256s] + builtin echo 'Starting qemu post script' [ 256s] Starting qemu post script [ 256s] ++ uname -m [ 256s] + '[' aarch64 = aarch64 ']' [ 256s] + builtin echo aarch64 arch [ 256s] aarch64 arch [ 256s] + ln -sf '%{our_path}/lib/libnsl.so.1' /lib/libnsl.so.1 [ 256s] + '[' '!' -d /proc/sys/fs/binfmt_misc ']' [ 256s] + did_mount_it= [ 256s] + '[' '!' -f /proc/sys/fs/binfmt_misc/register ']' [ 256s] + builtin echo mounting binfmt_misc [ 256s] mounting binfmt_misc [ 256s] + mount binfmt_misc -t binfmt_misc /proc/sys/fs/binfmt_misc [ 256s] + did_mount_it=1 [ 256s] + '[' -e /proc/sys/fs/binfmt_misc/aarch64 ']' [ 256s] + builtin echo Unregistering accelerated handler [ 256s] Unregistering accelerated handler [ 256s] + builtin echo -1 [ 256s] + '[' '!' -e /proc/sys/fs/binfmt_misc/aarch64 ']' [ 256s] + builtin echo Registering right binfmt handler [ 256s] Registering right binfmt handler [ 256s] + builtin echo ':aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/qemu/qemu-aarch64-binfmt:P' [ 256s] + cat /proc/sys/fs/binfmt_misc/aarch64 [ 256s] + sed -e 's/mask/mask /' [ 256s] enabled [ 256s] interpreter /qemu/qemu-aarch64-binfmt [ 256s] flags: P [ 256s] offset 0 [ 256s] magic 7f454c460201010000000000000000000200b7 [ 256s] mask ffffffffffffff00fffffffffffffffffeffff [ 256s] + '[' -n 1 ']' [ 256s] + builtin echo 'Unmounting again.' [ 256s] Unmounting again. [ 256s] + umount /proc/sys/fs/binfmt_misc [ 256s] + ls /qemu [ 256s] + read f [ 256s] + '[' -f /usr/bin/qemu-aarch64 ']' [ 256s] + builtin echo /usr/bin/qemu-aarch64 already 'presents!' [ 256s] /usr/bin/qemu-aarch64 already presents! [ 256s] + read f [ 256s] + '[' -f /usr/bin/qemu-aarch64-binfmt ']' [ 256s] + builtin echo /usr/bin/qemu-aarch64-binfmt already 'presents!' [ 256s] /usr/bin/qemu-aarch64-binfmt already presents! [ 256s] + read f [ 256s] + '[' -f /usr/bin/qemu-arm64 ']' [ 256s] + builtin echo /usr/bin/qemu-arm64 already 'presents!' [ 256s] /usr/bin/qemu-arm64 already presents! [ 256s] + read f [ 256s] + '[' -f /usr/bin/qemu-arm64-binfmt ']' [ 256s] + builtin echo /usr/bin/qemu-arm64-binfmt already 'presents!' [ 256s] /usr/bin/qemu-arm64-binfmt already presents! [ 256s] + read f [ 256s] + echo All done [ 256s] All done [ 256s] + echo 0 [ 256s] + '[' -f /usr/bin/gcc ']' [ 256s] ++ LANG=C [ 256s] ++ gcc --version [ 256s] ++ head -1 [ 256s] ++ sed -e 's/^.*gcc[^0-9]*\([0-9]*\)\.\([0-9]*\)\.\([0-9]*\).*$/\1.\2/' [ 256s] + export 'GCCVER=gcc (Tizen) 4.9' [ 256s] + GCCVER='gcc (Tizen) 4.9' [ 256s] + for f in crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o [ 256s] + ln -s /usr/lib64/gcc/aarch64-tizen-linux/gcc '(Tizen)' 4.9/crtbegin.o /usr/lib/crtbegin.o [ 256s] ln: target '/usr/lib/crtbegin.o' is not a directory [ 256s] + for f in crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o [ 256s] + ln -s /usr/lib64/gcc/aarch64-tizen-linux/gcc '(Tizen)' 4.9/crtbeginS.o /usr/lib/crtbeginS.o [ 256s] ln: target '/usr/lib/crtbeginS.o' is not a directory [ 256s] + for f in crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o [ 256s] + ln -s /usr/lib64/gcc/aarch64-tizen-linux/gcc '(Tizen)' 4.9/crtbeginT.o /usr/lib/crtbeginT.o [ 256s] ln: target '/usr/lib/crtbeginT.o' is not a directory [ 256s] + for f in crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o [ 256s] + ln -s /usr/lib64/gcc/aarch64-tizen-linux/gcc '(Tizen)' 4.9/crtend.o /usr/lib/crtend.o [ 256s] ln: target '/usr/lib/crtend.o' is not a directory [ 256s] + for f in crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o [ 256s] + ln -s /usr/lib64/gcc/aarch64-tizen-linux/gcc '(Tizen)' 4.9/crtendS.o /usr/lib/crtendS.o [ 256s] ln: target '/usr/lib/crtendS.o' is not a directory [ 256s] warning: %post(qemu-accel-aarch64-cross-aarch64-0.4-15.3.aarch64) scriptlet failed, exit status 1 [ 256s] [100/100] installing rpm-build-4.11.0.1-29.2 [ 257s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 257s] removing nis flags from //etc/nsswitch.conf... [ 257s] now finalizing build dir... [ 258s] qemu: Unsupported syscall: 219 [ 264s] build target is aarch64-tizen-linux [ 264s] ----------------------------------------------------------------- [ 264s] I have the following modifications for xproto.spec: [ 264s] 4c4 [ 264s] < Release: 0 [ 264s] --- [ 264s] > Release: 7.1 [ 264s] 43a44 [ 264s] > %changelog [ 264s] ----------------------------------------------------------------- [ 264s] ----- building xproto.spec (user abuild) [ 265s] ----------------------------------------------------------------- [ 265s] ----------------------------------------------------------------- [ 265s] qemu: Unsupported syscall: 219 [ 265s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0.2015.Q2:Common/arm64-x11/0ca56b3f409314e839f7e307ab37e714-xproto' /home/abuild/rpmbuild/SOURCES/xproto.spec [ 265s] Building target platforms: aarch64-tizen-linux [ 265s] Building for target aarch64-tizen-linux [ 265s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.h0qHRD [ 265s] + umask 022 [ 265s] + cd /home/abuild/rpmbuild/BUILD [ 265s] + cd /home/abuild/rpmbuild/BUILD [ 265s] + rm -rf xproto-7.0.26 [ 265s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/xproto-7.0.26.tar.bz2 [ 265s] + /bin/tar -xf - [ 265s] + STATUS=0 [ 265s] + '[' 0 -ne 0 ']' [ 265s] + cd xproto-7.0.26 [ 265s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 265s] + echo 'Patch #0 (62115c4-to-07d1d2a.diff):' [ 265s] Patch #0 (62115c4-to-07d1d2a.diff): [ 265s] + /bin/cat /home/abuild/rpmbuild/SOURCES/62115c4-to-07d1d2a.diff [ 265s] + /bin/patch -p1 --fuzz=2 [ 265s] patching file XF86keysym.h [ 265s] patching file Xpoll.h.in [ 265s] + cp /home/abuild/rpmbuild/SOURCES/xproto.manifest . [ 265s] + exit 0 [ 265s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.AbzDm5 [ 265s] + umask 022 [ 265s] + cd /home/abuild/rpmbuild/BUILD [ 265s] + cd xproto-7.0.26 [ 265s] ++ uname -m [ 265s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 265s] + ref=/usr/lib/rpm [ 265s] + for s in guess sub [ 265s] ++ find -maxdepth 8 -name config.guess [ 265s] + for s in guess sub [ 265s] ++ find -maxdepth 8 -name config.sub [ 265s] + LANG=C [ 265s] + export LANG [ 265s] + unset DISPLAY [ 265s] + CFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -march=armv8-a+fp+simd+crc+crypto -g' [ 265s] + export CFLAGS [ 265s] + CXXFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -march=armv8-a+fp+simd+crc+crypto -g' [ 265s] + export CXXFLAGS [ 265s] + FFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -march=armv8-a+fp+simd+crc+crypto -g -I%_fmoddir' [ 265s] + export FFLAGS [ 265s] + LD_AS_NEEDED=1 [ 265s] + export LD_AS_NEEDED [ 265s] + CFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -march=armv8-a+fp+simd+crc+crypto -g' [ 265s] + export CFLAGS [ 265s] + CXXFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -march=armv8-a+fp+simd+crc+crypto -g' [ 265s] + export CXXFLAGS [ 265s] + FFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -march=armv8-a+fp+simd+crc+crypto -g -I%_fmoddir' [ 265s] + export FFLAGS [ 265s] + ./autogen.sh --build=aarch64-unknown-linux-gnu --host=aarch64-unknown-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --disable-static --libdir=/usr/share --without-xmlto [ 268s] autoreconf: Entering directory `.' [ 268s] autoreconf: configure.ac: not using Gettext [ 269s] autoreconf: running: aclocal [ 272s] autoreconf: configure.ac: tracing [ 273s] autoreconf: configure.ac: not using Libtool [ 273s] autoreconf: running: /usr/bin/autoconf [ 277s] autoreconf: running: /usr/bin/autoheader [ 279s] autoreconf: running: automake --add-missing --copy --no-force [ 281s] configure.ac:10: installing './compile' [ 281s] configure.ac:10: installing './config.guess' [ 281s] configure.ac:10: installing './config.sub' [ 281s] configure.ac:4: installing './install-sh' [ 281s] configure.ac:4: installing './missing' [ 283s] autoreconf: Leaving directory `.' [ 283s] configure: WARNING: unrecognized options: --disable-static [ 284s] checking for a BSD-compatible install... /bin/install -c [ 284s] checking whether build environment is sane... yes [ 284s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 284s] checking for gawk... gawk [ 284s] checking whether make sets $(MAKE)... yes [ 284s] checking whether make supports nested variables... yes [ 284s] checking for style of include used by make... GNU [ 284s] checking for aarch64-unknown-linux-gnu-gcc... no [ 284s] checking for gcc... gcc [ 284s] checking whether the C compiler works... yes [ 284s] checking for C compiler default output file name... a.out [ 284s] checking for suffix of executables... [ 284s] checking whether we are cross compiling... no [ 284s] checking for suffix of object files... o [ 284s] checking whether we are using the GNU C compiler... yes [ 284s] checking whether gcc accepts -g... yes [ 284s] checking for gcc option to accept ISO C89... none needed [ 284s] checking whether gcc understands -c and -o together... yes [ 284s] checking dependency style of gcc... none [ 284s] checking for gcc option to accept ISO C99... -std=gnu99 [ 284s] checking how to run the C preprocessor... gcc -std=gnu99 -E [ 284s] checking for grep that handles long lines and -e... /bin/grep [ 284s] checking for egrep... /bin/grep -E [ 285s] checking for ANSI C header files... yes [ 285s] checking for sys/types.h... yes [ 285s] checking for sys/stat.h... yes [ 285s] checking for stdlib.h... yes [ 285s] checking for string.h... yes [ 285s] checking for memory.h... yes [ 285s] checking for strings.h... yes [ 285s] checking for inttypes.h... yes [ 285s] checking for stdint.h... yes [ 285s] checking for unistd.h... yes [ 285s] checking whether __clang__ is declared... no [ 285s] checking whether __INTEL_COMPILER is declared... no [ 285s] checking whether __SUNPRO_C is declared... no [ 285s] checking for aarch64-unknown-linux-gnu-pkg-config... /bin/aarch64-unknown-linux-gnu-pkg-config [ 285s] checking pkg-config is at least version 0.9.0... yes [ 285s] checking build system type... aarch64-unknown-linux-gnu [ 285s] checking host system type... aarch64-unknown-linux-gnu [ 285s] checking for a sed that does not truncate output... /bin/sed [ 285s] checking if gcc -std=gnu99 supports -Werror=unknown-warning-option... no [ 285s] checking if gcc -std=gnu99 supports -Werror=unused-command-line-argument... no [ 285s] checking if gcc -std=gnu99 supports-Wall... yes [ 285s] checking if gcc -std=gnu99 supports-Wpointer-arith... yes [ 285s] checking if gcc -std=gnu99 supports-Wmissing-declarations... yes [ 286s] checking if gcc -std=gnu99 supports-Wformat=2... yes [ 286s] checking if gcc -std=gnu99 supports-Wstrict-prototypes... yes [ 286s] checking if gcc -std=gnu99 supports-Wmissing-prototypes... yes [ 286s] checking if gcc -std=gnu99 supports-Wnested-externs... yes [ 286s] checking if gcc -std=gnu99 supports-Wbad-function-cast... yes [ 286s] checking if gcc -std=gnu99 supports-Wold-style-definition... yes [ 286s] checking if gcc -std=gnu99 supports-Wdeclaration-after-statement... yes [ 286s] checking if gcc -std=gnu99 supports-Wunused... yes [ 286s] checking if gcc -std=gnu99 supports-Wuninitialized... yes [ 286s] checking if gcc -std=gnu99 supports-Wshadow... yes [ 286s] checking if gcc -std=gnu99 supports-Wcast-qual... yes [ 286s] checking if gcc -std=gnu99 supports-Wmissing-noreturn... yes [ 286s] checking if gcc -std=gnu99 supports-Wmissing-format-attribute... yes [ 286s] checking if gcc -std=gnu99 supports-Wredundant-decls... yes [ 286s] checking if gcc -std=gnu99 supports-Werror=implicit... yes [ 287s] checking if gcc -std=gnu99 supports-Werror=nonnull... yes [ 287s] checking if gcc -std=gnu99 supports-Werror=init-self... yes [ 287s] checking if gcc -std=gnu99 supports-Werror=main... yes [ 287s] checking if gcc -std=gnu99 supports-Werror=missing-braces... yes [ 287s] checking if gcc -std=gnu99 supports-Werror=sequence-point... yes [ 287s] checking if gcc -std=gnu99 supports-Werror=return-type... yes [ 287s] checking if gcc -std=gnu99 supports-Werror=trigraphs... yes [ 287s] checking if gcc -std=gnu99 supports-Werror=array-bounds... yes [ 287s] checking if gcc -std=gnu99 supports-Werror=write-strings... yes [ 287s] checking if gcc -std=gnu99 supports-Werror=address... yes [ 287s] checking if gcc -std=gnu99 supports-Werror=int-to-pointer-cast... yes [ 287s] checking if gcc -std=gnu99 supports-Werror=pointer-to-int-cast... yes [ 287s] checking if gcc -std=gnu99 supports-pedantic... yes [ 287s] checking if gcc -std=gnu99 supports-Werror... yes [ 287s] checking if gcc -std=gnu99 supports-Werror=attributes... yes [ 288s] checking whether make supports nested variables... (cached) yes [ 288s] checking whether to build functional specifications... yes [ 288s] checking for fop... no [ 288s] configure: WARNING: fop not found - documentation targets will be skipped [ 288s] checking for xsltproc... no [ 288s] configure: WARNING: xsltproc not found - cannot transform XML documents [ 288s] checking for X.Org SGML entities >= 1.8... no [ 288s] checking sys/select.h usability... yes [ 288s] checking sys/select.h presence... yes [ 288s] checking for sys/select.h... yes [ 288s] checking sys/param.h usability... yes [ 288s] checking sys/param.h presence... yes [ 288s] checking for sys/param.h... yes [ 288s] checking for sys/types.h... (cached) yes [ 288s] checking sys/time.h usability... yes [ 288s] checking sys/time.h presence... yes [ 288s] checking for sys/time.h... yes [ 288s] checking for fd_set.fds_bits... no [ 288s] checking for fd_set.__fds_bits... yes [ 288s] checking whether const prototypes are supported... yes [ 288s] checking whether varargs prototypes are supported... yes [ 288s] checking whether nested prototypes are supported... yes [ 288s] checking whether to force function prototypes... yes [ 288s] checking whether to widen function prototypes... no [ 288s] checking that generated files are newer than configure... done [ 288s] configure: creating ./config.status [ 288s] config.status: creating Makefile [ 288s] config.status: creating specs/Makefile [ 288s] config.status: creating specs/SIAddresses/Makefile [ 288s] config.status: creating Xpoll.h [ 289s] config.status: creating xproto.pc [ 289s] config.status: creating do-not-use-config.h [ 289s] config.status: creating Xfuncproto.h [ 289s] config.status: executing depfiles commands [ 289s] configure: WARNING: unrecognized options: --disable-static [ 289s] + make -j4 [ 289s] make all-recursive [ 289s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xproto-7.0.26' [ 289s] Making all in specs [ 289s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xproto-7.0.26/specs' [ 289s] Making all in SIAddresses [ 289s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xproto-7.0.26/specs/SIAddresses' [ 289s] make[3]: Nothing to be done for 'all'. [ 289s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xproto-7.0.26/specs/SIAddresses' [ 289s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xproto-7.0.26/specs' [ 289s] make[3]: Nothing to be done for 'all-am'. [ 289s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xproto-7.0.26/specs' [ 289s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xproto-7.0.26/specs' [ 289s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xproto-7.0.26' [ 289s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xproto-7.0.26' [ 289s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xproto-7.0.26' [ 289s] + exit 0 [ 289s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.BogRb0 [ 289s] + umask 022 [ 289s] + cd /home/abuild/rpmbuild/BUILD [ 289s] + cd xproto-7.0.26 [ 289s] + LANG=C [ 289s] + export LANG [ 289s] + unset DISPLAY [ 289s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xproto-7.0.26-7.1.aarch64 [ 289s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xproto-7.0.26-7.1.aarch64 [ 289s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xproto-7.0.26-7.1.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/xproto-7.0.26-7.1.aarch64 install [ 289s] Making install in specs [ 289s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xproto-7.0.26/specs' [ 289s] Making install in SIAddresses [ 289s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xproto-7.0.26/specs/SIAddresses' [ 289s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xproto-7.0.26/specs/SIAddresses' [ 289s] make[3]: Nothing to be done for 'install-exec-am'. [ 289s] make[3]: Nothing to be done for 'install-data-am'. [ 289s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xproto-7.0.26/specs/SIAddresses' [ 289s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xproto-7.0.26/specs/SIAddresses' [ 289s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xproto-7.0.26/specs' [ 289s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xproto-7.0.26/specs' [ 289s] make[3]: Nothing to be done for 'install-exec-am'. [ 289s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xproto-7.0.26-7.1.aarch64/usr/share/doc/xproto' [ 289s] /bin/install -c -m 644 x11protocol.xml encoding.xml glossary.xml keysyms.xml sect1-9.xml '/home/abuild/rpmbuild/BUILDROOT/xproto-7.0.26-7.1.aarch64/usr/share/doc/xproto' [ 289s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xproto-7.0.26-7.1.aarch64/usr/share/doc/xproto' [ 289s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xproto-7.0.26/specs' [ 289s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xproto-7.0.26/specs' [ 289s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xproto-7.0.26/specs' [ 289s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xproto-7.0.26' [ 289s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xproto-7.0.26' [ 289s] make[2]: Nothing to be done for 'install-exec-am'. [ 289s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xproto-7.0.26-7.1.aarch64/usr/include/X11' [ 289s] /bin/install -c -m 644 Xfuncproto.h Xpoll.h '/home/abuild/rpmbuild/BUILDROOT/xproto-7.0.26-7.1.aarch64/usr/include/X11' [ 289s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xproto-7.0.26-7.1.aarch64/usr/share/pkgconfig' [ 289s] /bin/install -c -m 644 xproto.pc '/home/abuild/rpmbuild/BUILDROOT/xproto-7.0.26-7.1.aarch64/usr/share/pkgconfig' [ 289s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xproto-7.0.26-7.1.aarch64/usr/include/X11' [ 289s] /bin/install -c -m 644 ap_keysym.h DECkeysym.h HPkeysym.h keysymdef.h keysym.h Sunkeysym.h Xalloca.h Xarch.h Xatom.h Xdefs.h XF86keysym.h Xfuncs.h X.h Xmd.h Xosdefs.h Xos.h Xos_r.h Xproto.h Xprotostr.h Xthreads.h Xw32defs.h XWDFile.h Xwindows.h Xwinsock.h '/home/abuild/rpmbuild/BUILDROOT/xproto-7.0.26-7.1.aarch64/usr/include/X11' [ 289s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xproto-7.0.26' [ 289s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xproto-7.0.26' [ 289s] + rm -f /home/abuild/rpmbuild/BUILDROOT/xproto-7.0.26-7.1.aarch64/usr/share/info/dir [ 289s] + find /home/abuild/rpmbuild/BUILDROOT/xproto-7.0.26-7.1.aarch64 -regex '.*\.la$' [ 289s] + xargs rm -f -- [ 289s] + find /home/abuild/rpmbuild/BUILDROOT/xproto-7.0.26-7.1.aarch64 -regex '.*\.a$' [ 289s] + xargs rm -f -- [ 289s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xproto-7.0.26-7.1.aarch64/usr/share/info [ 289s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xproto-7.0.26-7.1.aarch64/usr/share/doc/packages [ 289s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xproto-7.0.26-7.1.aarch64/usr/share/doc/xproto [ 289s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xproto-7.0.26-7.1.aarch64/usr/share/doc/xproto-7.0.26 [ 289s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xproto-7.0.26-7.1.aarch64/usr/share/gtk-doc [ 289s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xproto-7.0.26-7.1.aarch64/usr/share/doc [ 289s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xproto-7.0.26-7.1.aarch64/usr/share/man [ 289s] + xargs rm -f -- [ 289s] + find /home/abuild/rpmbuild/BUILDROOT/xproto-7.0.26-7.1.aarch64 -regex '.*/man/man./.*.[0-9]' [ 289s] + find /home/abuild/rpmbuild/BUILDROOT/xproto-7.0.26-7.1.aarch64 -regex '.*/man/../man./.*.[0-9]' [ 289s] + xargs rm -f -- [ 289s] + find /home/abuild/rpmbuild/BUILDROOT/xproto-7.0.26-7.1.aarch64 -regex '.*/man/man./.*.[0-9]pm' [ 289s] + xargs rm -f -- [ 289s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/xproto-7.0.26 [ 289s] + /usr/lib/rpm/brp-compress [ 289s] + /usr/lib/rpm/brp-tizen [ 289s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xproto-7.0.26-7.1.aarch64 [ 289s] Processing files: xproto-7.0.26-7.1.aarch64 [ 289s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 289s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 289s] [ 289s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.qOvxpW [ 289s] + umask 022 [ 289s] + cd /home/abuild/rpmbuild/BUILD [ 289s] + cd xproto-7.0.26 [ 289s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xproto-7.0.26-7.1.aarch64/usr/share/licenses/xproto [ 289s] + export LICENSEDIR [ 289s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xproto-7.0.26-7.1.aarch64/usr/share/licenses/xproto [ 289s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/xproto-7.0.26-7.1.aarch64/usr/share/licenses/xproto [ 289s] + exit 0 [ 290s] Provides: pkgconfig(xproto) = 7.0.26 xproto = 7.0.26-7.1 xproto(aarch-64) = 7.0.26-7.1 [ 290s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 290s] Requires: /usr/bin/pkg-config [ 290s] Processing files: xproto-debugsource-7.0.26-7.1.aarch64 [ 290s] Provides: xproto-debugsource = 7.0.26-7.1 xproto-debugsource(aarch-64) = 7.0.26-7.1 [ 290s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 290s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xproto-7.0.26-7.1.aarch64 [ 290s] warning: Could not canonicalize hostname: w23 [ 290s] Wrote: /home/abuild/rpmbuild/SRPMS/xproto-7.0.26-7.1.src.rpm [ 290s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xproto-7.0.26-7.1.aarch64.rpm [ 290s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xproto-debugsource-7.0.26-7.1.aarch64.rpm [ 290s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.AscbWN [ 290s] + umask 022 [ 290s] + cd /home/abuild/rpmbuild/BUILD [ 290s] + cd xproto-7.0.26 [ 290s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/xproto-7.0.26-7.1.aarch64 [ 290s] + exit 0 [ 290s] ... checking for files with abuild user/group [ 290s] [ 290s] RPMLINT report: [ 290s] =============== [ 290s] qemu: Unsupported syscall: 219 [ 296s] xproto.aarch64: W: no-binary [ 296s] The package should be of the noarch architecture because it doesn't contain [ 296s] any binaries. [ 296s] [ 296s] xproto.aarch64: W: description-shorter-than-summary [ 296s] xproto.src: W: description-shorter-than-summary [ 296s] The package description should be longer than the summary. be a bit more [ 296s] verbose, please. [ 296s] [ 296s] 2 packages and 0 specfiles checked; 0 errors, 3 warnings. [ 296s] [ 296s] ... creating baselibs [ 296s] qemu: Unsupported syscall: 219 [ 296s] ... comparing built packages with the former built [ 296s] /usr/lib/build/pkg-diff.sh [ 296s] compare /.build.oldpackages/xproto-7.0.26-5.2.src.rpm /home/abuild/rpmbuild/SRPMS/xproto-7.0.26-7.1.src.rpm [ 297s] comparing rpmtags [ 297s] comparing RELEASE [ 297s] comparing PROVIDES [ 297s] comparing scripts [ 297s] comparing filelist [ 297s] comparing file checksum [ 297s] RPM meta information is identical [ 297s] compare /.build.oldpackages/xproto-7.0.26-5.2.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/xproto-7.0.26-7.1.aarch64.rpm [ 297s] Comparing xproto-7.0.26-5.2.aarch64.rpm to xproto-7.0.26-7.1.aarch64.rpm [ 297s] comparing rpmtags [ 297s] --- /tmp/tmp.npFxY3DM1A/tmp.qafnUhgTRx 2015-06-16 00:44:17.000000000 +0000 [ 297s] +++ /tmp/tmp.npFxY3DM1A/tmp.24LORhqpib 2015-06-16 00:44:17.000000000 +0000 [ 297s] @@ -1,7 +1,7 @@ [ 297s] xproto 7.0.26 (none) [ 297s] X [ 297s] X [ 297s] - tizen Tizen:Common / arm64-x11 obs://build.tizen.org/Tizen:Common/arm64-x11/c0da732ead122d8537ce7efa2615af3d-xproto MIT MIT [ 297s] + tizen Tizen:3.0.2015.Q2:Common / arm64-x11 obs://build.tizen.org/Tizen:3.0.2015.Q2:Common/arm64-x11/0ca56b3f409314e839f7e307ab37e714-xproto MIT MIT [ 297s] Development/System http://www.x.org (none) (none) (none) [ 297s] (none) 4.11.0.1 aarch64-tizen-linux [ 297s] cpio lzma 5 [ 297s] RPM meta information is different [ 297s] compare /.build.oldpackages/xproto-debugsource-7.0.26-5.2.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/xproto-debugsource-7.0.26-7.1.aarch64.rpm [ 298s] Comparing xproto-debugsource-7.0.26-5.2.aarch64.rpm to xproto-debugsource-7.0.26-7.1.aarch64.rpm [ 298s] comparing rpmtags [ 298s] --- /tmp/tmp.40AC3cchYP/tmp.1864fRvJEY 2015-06-16 00:44:17.000000000 +0000 [ 298s] +++ /tmp/tmp.40AC3cchYP/tmp.WMemxWgTf1 2015-06-16 00:44:17.000000000 +0000 [ 298s] @@ -3,7 +3,7 @@ [ 298s] This package provides debug sources for package xproto. [ 298s] Debug sources are useful when developing applications that use this [ 298s] package or when debugging this package. [ 298s] - tizen Tizen:Common / arm64-x11 obs://build.tizen.org/Tizen:Common/arm64-x11/c0da732ead122d8537ce7efa2615af3d-xproto MIT MIT [ 298s] + tizen Tizen:3.0.2015.Q2:Common / arm64-x11 obs://build.tizen.org/Tizen:3.0.2015.Q2:Common/arm64-x11/0ca56b3f409314e839f7e307ab37e714-xproto MIT MIT [ 298s] Development/Debug http://www.x.org (none) (none) (none) [ 298s] (none) 4.11.0.1 aarch64-tizen-linux [ 298s] cpio lzma 5 [ 298s] RPM meta information is different [ 298s] comparing /.build.oldpackages/rpmlint.log and /home/abuild/rpmbuild/OTHER/rpmlint.log [ 298s] ... saving built statistics [ 298s] ... saving built packages [ 298s] /home/abuild/rpmbuild/RPMS/aarch64/xproto-7.0.26-7.1.aarch64.rpm [ 298s] /home/abuild/rpmbuild/RPMS/aarch64/xproto-debugsource-7.0.26-7.1.aarch64.rpm [ 298s] /home/abuild/rpmbuild/SRPMS/xproto-7.0.26-7.1.src.rpm [ 298s] /home/abuild/rpmbuild/OTHER/_statistics [ 298s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 298s] [ 298s] w23 finished "build xproto.spec" at Tue Jun 16 00:44:18 UTC 2015. [ 298s] [ 301s] [ 271.428466] SysRq : Power Off [ 301s] [ 271.536419] Power down. [ 302s] build: extracting built packages... [ 302s] xproto-7.0.26-7.1.aarch64.rpm [ 302s] xproto-debugsource-7.0.26-7.1.aarch64.rpm [ 302s] xproto-7.0.26-7.1.src.rpm [ 302s] _statistics [ 302s] rpmlint.log Retried build at Mon Jun 15 21:35:03 2015 returned same result, skipped Retried build at Tue Jun 16 00:31:37 2015 returned same result, skipped Retried build at Tue Jun 16 04:56:15 2015 returned same result, skipped Retried build at Tue Jun 16 09:53:48 2015 returned same result, skipped Retried build at Wed Jun 17 07:48:13 2015 returned same result, skipped Retried build at Tue Jun 23 08:30:55 2015 returned same result, skipped