[ 0s] Using BUILD_ROOT=/srv/build/root_3/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_3/root [ 0s] [ 0s] [ 0s] w16 started "build _service:gbs:perl-WWW-Curl.spec" at Tue Jun 23 12:16:28 UTC 2015. [ 0s] [ 0s] Building perl-WWW-Curl for project 'Tizen:3.0.2015.Q2:Common' repository 'emulator32-wayland' arch 'i586' srcmd5 '1e9065750c685e7fda9c8a3aad297fd8' [ 0s] [ 0s] processing specfile /srv/build/root_3/.build-srcdir/_service:gbs:perl-WWW-Curl.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_3/.build-srcdir/_service:gbs:perl-WWW-Curl.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/3/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_3/.build.rpmlist /srv/build/root_3/.build-srcdir/_service:gbs:perl-WWW-Curl.spec build rpmlint-Factory ... [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/34] preinstalling libmagic-data... [ 1s] [2/34] preinstalling setup... [ 1s] [3/34] preinstalling filesystem... [ 1s] [4/34] preinstalling glibc... [ 1s] [5/34] preinstalling bash... [ 1s] [6/34] preinstalling diffutils... [ 1s] [7/34] preinstalling libattr... [ 1s] [8/34] preinstalling libbz2... [ 1s] [9/34] preinstalling libelf... [ 1s] [10/34] preinstalling libfreebl3... [ 1s] [11/34] preinstalling libgcc_s1... [ 1s] [12/34] preinstalling liblua... [ 1s] [13/34] preinstalling liblzma... [ 1s] [14/34] preinstalling libncurses... [ 1s] [15/34] preinstalling libpopt... [ 1s] [16/34] preinstalling libsmack... [ 1s] [17/34] preinstalling libsqlite... [ 1s] [18/34] preinstalling nspr... [ 1s] [19/34] preinstalling sed... [ 2s] [20/34] preinstalling tar... [ 2s] [21/34] preinstalling zlib... [ 2s] [22/34] preinstalling grep... [ 2s] [23/34] preinstalling libacl... [ 2s] [24/34] preinstalling libcap... [ 2s] [25/34] preinstalling libreadline... [ 2s] [26/34] preinstalling smack... [ 2s] [27/34] preinstalling bzip2... [ 2s] [28/34] preinstalling libmagic... [ 2s] [29/34] preinstalling libxml2... [ 2s] [30/34] preinstalling util-linux... [ 2s] [31/34] preinstalling coreutils... [ 2s] [32/34] preinstalling nss... [ 2s] [33/34] preinstalling libsoftokn3... [ 2s] [34/34] preinstalling rpm... [ 2s] [ 2s] [1/9] preinstalling libext2fs... [ 3s] [2/9] preinstalling libpcre... [ 3s] [3/9] preinstalling libsmartcols... [ 3s] [4/9] preinstalling libuuid... [ 3s] [5/9] preinstalling perl... [ 3s] [6/9] preinstalling grep... [ 3s] [7/9] preinstalling libblkid... [ 3s] [8/9] preinstalling libmount... [ 3s] [9/9] preinstalling util-linux... [ 3s] copying packages... [ 4s] reordering...cycle: gcc49-locale -> gcc49 [ 4s] breaking dependency gcc49 -> gcc49-locale [ 4s] cycle: coreutils -> pam [ 4s] breaking dependency pam -> coreutils [ 4s] cycle: nss -> libsoftokn3 [ 4s] breaking dependency nss -> libsoftokn3 [ 4s] done [ 4s] booting kvm ... [ 4s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 8000 -drive file=/srv/build/root_3/root,if=virtio,cache=none -drive file=/srv/build/root_3/root,if=ide,index=0,cache=none -drive file=/srv/build/root_3/swap,if=virtio,cache=none -smp 4 [ 7s] doing fast boot [ 7s] Creating device nodes with udev [ 7s] Waiting for device /dev/vda to appear: ok [ 7s] fsck from util-linux 2.21.2 [ 7s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 7s] /dev/vda: clean, 4454/2392064 files, 190657/9568256 blocks [ 7s] fsck succeeded. Mounting root device read-write. [ 7s] Mounting root /dev/vda [ 7s] mount -o rw -t ext4 /dev/vda /root [ 7s] replacing /etc/mtab with symlink to /proc/self/mounts [ 7s] 2nd stage started in virtual machine [ 7s] machine type: x86_64 [ 7s] switching personality to 8... [ 7s] 2nd stage started in virtual machine [ 7s] machine type: i686 [ 7s] swapon /dev/vdb [ 7s] swapon: /dev/vdb: found swap signature: version 1d, page-size 4, same byte order [ 7s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 7s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 7s] mount: none is already mounted or /proc busy [ 7s] mount: none is already mounted or /dev/pts busy [ 7s] logging output to //.build.log... [ 8s] processing specfile /.build-srcdir/_service:gbs:perl-WWW-Curl.spec ... [ 8s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:perl-WWW-Curl.spec build rpmlint-Factory ... [ 8s] running setup postinstall script [ 8s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 8s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 8s] initializing rpm db... [ 8s] [1/112] installing libmagic-data-5.18-8.3 [ 8s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 8s] [2/112] installing libstdc++-locale-4.9.2-12.1 [ 8s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 8s] [3/112] installing setup-0.9-10.5 [ 8s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 8s] [4/112] installing terminfo-base-5.9-6.5 [ 8s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 8s] [5/112] installing filesystem-3.1-11.1 [ 8s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 8s] [6/112] installing glibc-2.21-8.22 [ 8s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 8s] [7/112] installing bash-4.3.30-16.7 [ 8s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 8s] [8/112] installing cpio-2.11-7.3 [ 8s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 8s] [9/112] installing diffutils-3.3-7.3 [ 8s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 8s] [10/112] installing findutils-4.5.14-7.3 [ 8s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 8s] [11/112] installing gawk-4.1.1-7.5 [ 8s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 8s] [12/112] installing hostname-3.12-6.3 [ 9s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 9s] [13/112] installing libatomic-4.9.2-12.1 [ 9s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 9s] [14/112] installing libattr-2.4.47-8.3 [ 9s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 9s] [15/112] installing libbz2-1.0.6-6.19 [ 9s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 9s] [16/112] installing libcares-1.10.0-8.3 [ 9s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 9s] [17/112] installing libelf-0.160-7.8 [ 9s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 9s] [18/112] installing libext2fs-1.42.11-9.3 [ 9s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 9s] [19/112] installing libfreebl3-3.17.2-12.30 [ 9s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 9s] [20/112] installing libgcc_s1-4.9.2-12.1 [ 9s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 9s] [21/112] installing libgdbm-1.11-8.5 [ 9s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 9s] [22/112] installing libgmp-6.0.0-7.5 [ 9s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 9s] [23/112] installing libgomp-4.9.2-12.1 [ 9s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 9s] [24/112] installing libitm-4.9.2-12.1 [ 9s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 9s] [25/112] installing libltdl-2.4.2-6.5 [ 9s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 9s] [26/112] installing liblua-5.1.4-8.5 [ 9s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 9s] [27/112] installing liblzma-5.1.3-7.5 [ 9s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 9s] [28/112] installing libpcre-8.31-5.3 [ 9s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 9s] [29/112] installing libpopt-1.16-5.4 [ 9s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 9s] [30/112] installing libsmack-1.1.0-11.3 [ 9s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 9s] [31/112] installing libsmartcols-2.25.2-10.7 [ 9s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 9s] [32/112] installing libsqlite-3.7.14-10.3 [ 9s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 9s] [33/112] installing libuuid-2.25.2-10.7 [ 9s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 9s] [34/112] installing m4-1.4.17-7.3 [ 9s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 9s] [35/112] installing net-tools-2.0_20121208git-5.3 [ 9s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 9s] [36/112] installing nspr-4.10.7-8.6 [ 9s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 9s] [37/112] installing patch-2.7-5.3 [ 9s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 10s] [38/112] installing pkg-config-0.28-6.3 [ 10s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 10s] [39/112] installing sed-4.2.2-7.3 [ 10s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 10s] [40/112] installing tar-1.27-5.3 [ 10s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 10s] [41/112] installing update-alternatives-1.16.3-7.3 [ 10s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 10s] [42/112] installing which-2.20-5.3 [ 10s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 10s] [43/112] installing zlib-1.2.8-7.3 [ 10s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 10s] [44/112] installing libncurses-5.9-6.5 [ 10s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 10s] [45/112] installing build-compare-2015.04.28-10.7 [ 10s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 10s] [46/112] installing gcc49-info-4.9.2-12.1 [ 10s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 10s] [47/112] installing less-466-7.3 [ 10s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 10s] [48/112] installing libacl-2.2.52-8.3 [ 10s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 10s] [49/112] installing libasm-0.160-7.8 [ 10s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 10s] [50/112] installing libblkid-2.25.2-10.7 [ 10s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 10s] [51/112] installing libcap-2.24-7.15 [ 10s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 10s] [52/112] installing libidn-1.25-6.3 [ 10s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 10s] [53/112] installing libmpfr-3.1.2-7.5 [ 10s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 10s] [54/112] installing libopenssl-1.0.1l-10.9 [ 10s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 10s] [55/112] installing libreadline-5.2-6.3 [ 10s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 10s] [56/112] installing make-4.0-8.3 [ 10s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 10s] [57/112] installing nss-certs-3.17.2-12.30 [ 11s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 11s] [58/112] installing smack-1.1.0-11.3 [ 11s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 11s] [59/112] installing bzip2-1.0.6-6.19 [ 11s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 11s] [60/112] installing grep-2.19-7.3 [ 11s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 11s] [61/112] installing libmagic-5.18-8.3 [ 11s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 11s] [62/112] installing libstdc++-4.9.2-12.1 [ 11s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 11s] [63/112] installing libxml2-2.8.0-8.3 [ 11s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 11s] [64/112] installing xz-5.1.3-7.5 [ 11s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 11s] [65/112] installing binutils-2.25-15.2 [ 11s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 11s] update-alternatives: using /usr/bin/ld.bfd to provide /usr/bin/ld (ld) in auto mode. [ 11s] [66/112] installing libdw-0.160-7.8 [ 11s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 11s] [67/112] installing db4-4.8.30.NC-6.6 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [68/112] installing file-5.18-8.3 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [69/112] installing libasan-4.9.2-12.1 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [70/112] installing libcilkrts-4.9.2-12.1 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [71/112] installing libmount-2.25.2-10.7 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [72/112] installing libmpc-1.0-5.4 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [73/112] installing libubsan-4.9.2-12.1 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [74/112] installing openssl-1.0.1l-10.9 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [75/112] installing libcurl-7.37.1-8.3 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [76/112] installing elfutils-0.160-7.8 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [77/112] installing cpp49-4.9.2-12.1 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [78/112] installing perl-5.20.0-7.14 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [79/112] installing build-mkbaselibs-20120927-8.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [80/112] installing perl-Devel-Symdump-2.08-5.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [81/112] installing cpp-4.9-8.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [82/112] installing autoconf-2.69-7.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [83/112] installing perl-Pod-Coverage-0.22-6.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [84/112] installing build-20120927-8.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [85/112] installing perl-Test-Pod-Coverage-1.08-6.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [86/112] installing pam-1.1.6-8.5 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [87/112] installing nss-3.17.2-12.30 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [88/112] installing libsoftokn3-3.17.2-12.30 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [89/112] installing coreutils-8.21-9.3 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [90/112] installing util-linux-2.25.2-10.7 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [91/112] installing rpm-4.11.0.1-29.3 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [92/112] installing linux-glibc-devel-3.10-7.1 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [93/112] installing glibc-locale-2.21-8.22 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [94/112] installing gzip-1.6-6.3 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [95/112] installing automake-1.14.1-7.2 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [96/112] installing tzdata-2014h-7.3 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [97/112] installing rpmlint-mini-1.5-10.4 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [98/112] installing rpmlint-tizen-1.0-5.1 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [99/112] installing glibc-devel-2.21-8.22 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [100/112] installing libtool-2.4.2-6.5 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [101/112] installing libstdc++49-devel-4.9.2-12.1 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [102/112] installing libcares-devel-1.10.0-8.3 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [103/112] installing libidn-devel-1.25-6.3 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [104/112] installing zlib-devel-1.2.8-7.3 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [105/112] installing gcc49-4.9.2-12.1 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [106/112] installing gcc49-locale-4.9.2-12.1 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [107/112] installing gcc-4.9-8.1 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [108/112] installing libcurl-devel-7.37.1-8.3 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [109/112] installing libopenssl-devel-1.0.1l-10.9 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [110/112] installing gcc49-c++-4.9.2-12.1 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [111/112] installing gcc-c++-4.9-8.1 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [112/112] installing rpm-build-4.11.0.1-29.3 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] removing nis flags from //etc/nsswitch.conf... [ 20s] now finalizing build dir... [ 20s] Warning: spec file parser line 24: can't expand %(...) [ 20s] Warning: spec file parser line 30: can't expand %(...) [ 21s] build target is i686-tizen-linux [ 21s] ----------------------------------------------------------------- [ 21s] I have the following modifications for perl-WWW-Curl.spec: [ 21s] 18c18 [ 21s] < release: 4.1 [ 21s] --- [ 21s] > release: 5.3 [ 21s] ----------------------------------------------------------------- [ 21s] ----- building perl-WWW-Curl.spec (user abuild) [ 21s] ----------------------------------------------------------------- [ 21s] ----------------------------------------------------------------- [ 21s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=i686-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0.2015.Q2:Common/emulator32-wayland/1e9065750c685e7fda9c8a3aad297fd8-perl-WWW-Curl' /home/abuild/rpmbuild/SOURCES/perl-WWW-Curl.spec [ 21s] Building target platforms: i686-tizen-linux [ 21s] Building for target i686-tizen-linux [ 21s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.XHAV8g [ 21s] + umask 022 [ 21s] + cd /home/abuild/rpmbuild/BUILD [ 21s] + cd /home/abuild/rpmbuild/BUILD [ 21s] + rm -rf perl-WWW-Curl-4.05 [ 21s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/perl-WWW-Curl-4.05.tar.bz2 [ 21s] + /bin/tar -xvvf - [ 21s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/ [ 21s] -rw-rw-r-- root/root 11915 2013-07-01 18:58 perl-WWW-Curl-4.05/Changes [ 21s] -rw-rw-r-- root/root 31779 2013-07-01 18:58 perl-WWW-Curl-4.05/Curl.xs [ 21s] -rw-rw-r-- root/root 255 2013-07-01 18:58 perl-WWW-Curl-4.05/LICENSE [ 21s] -rw-rw-r-- root/root 963 2013-07-01 18:58 perl-WWW-Curl-4.05/MANIFEST [ 21s] -rw-rw-r-- root/root 487 2013-07-01 18:58 perl-WWW-Curl-4.05/META.yml [ 21s] -rw-rw-r-- root/root 8543 2013-07-01 18:58 perl-WWW-Curl-4.05/Makefile.PL [ 21s] -rw-rw-r-- root/root 2475 2013-07-01 18:58 perl-WWW-Curl-4.05/README [ 21s] -rw-rw-r-- root/root 673 2013-07-01 18:58 perl-WWW-Curl-4.05/README.Win32 [ 21s] -rw-rw-r-- root/root 4168 2013-07-01 18:58 perl-WWW-Curl-4.05/SIGNATURE [ 21s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/ [ 21s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/ [ 21s] -rw-rw-r-- root/root 8549 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install.pm [ 21s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install/ [ 21s] -rw-rw-r-- root/root 1053 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install/Base.pm [ 21s] -rw-rw-r-- root/root 1788 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install/Can.pm [ 21s] -rw-rw-r-- root/root 1530 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install/External.pm [ 21s] -rw-rw-r-- root/root 1094 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install/MakeMaker.pm [ 21s] -rw-rw-r-- root/root 6225 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install/Makefile.pm [ 21s] -rw-rw-r-- root/root 9448 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install/Metadata.pm [ 21s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/ [ 21s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/WWW/ [ 21s] -rw-rw-r-- root/root 10200 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/WWW/Curl.pm [ 21s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/WWW/Curl/ [ 21s] -rw-rw-r-- root/root 5242 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/WWW/Curl/Easy.pm [ 21s] -rw-rw-r-- root/root 187 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/WWW/Curl/Form.pm [ 21s] -rw-rw-r-- root/root 367 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/WWW/Curl/Multi.pm [ 21s] -rw-rw-r-- root/root 1018 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/WWW/Curl/Share.pm [ 21s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/packaging/ [ 21s] -rw-rw-r-- root/root 69 2013-07-01 18:58 perl-WWW-Curl-4.05/packaging/perl-WWW-Curl.manifest [ 21s] -rw-rw-r-- root/root 3997 2013-07-01 18:58 perl-WWW-Curl-4.05/packaging/perl-WWW-Curl.spec [ 21s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/t/ [ 21s] -rw-rw-r-- root/root 152 2013-07-01 18:58 perl-WWW-Curl-4.05/t/00constants.t [ 21s] -rw-rw-r-- root/root 1630 2013-07-01 18:58 perl-WWW-Curl-4.05/t/01basic.t [ 21s] -rw-rw-r-- root/root 1192 2013-07-01 18:58 perl-WWW-Curl-4.05/t/02callbacks.t [ 21s] -rw-rw-r-- root/root 1049 2013-07-01 18:58 perl-WWW-Curl-4.05/t/04abort-test.t [ 21s] -rw-rw-r-- root/root 1716 2013-07-01 18:58 perl-WWW-Curl-4.05/t/05progress.t [ 21s] -rw-rw-r-- root/root 1827 2013-07-01 18:58 perl-WWW-Curl-4.05/t/06http-post.t [ 21s] -rw-rw-r-- root/root 2103 2013-07-01 18:58 perl-WWW-Curl-4.05/t/07ftp-upload.t [ 21s] -rw-rw-r-- root/root 3243 2013-07-01 18:58 perl-WWW-Curl-4.05/t/08ssl.t [ 21s] -rw-rw-r-- root/root 1978 2013-07-01 18:58 perl-WWW-Curl-4.05/t/09times.t [ 21s] -rw-rw-r-- root/root 1284 2013-07-01 18:58 perl-WWW-Curl-4.05/t/10errbuf.t [ 21s] -rw-rw-r-- root/root 1133 2013-07-01 18:58 perl-WWW-Curl-4.05/t/13slowleak.t [ 21s] -rw-rw-r-- root/root 2178 2013-07-01 18:58 perl-WWW-Curl-4.05/t/14duphandle.t [ 21s] -rw-rw-r-- root/root 3153 2013-07-01 18:58 perl-WWW-Curl-4.05/t/15duphandle-callback.t [ 21s] -rw-rw-r-- root/root 2043 2013-07-01 18:58 perl-WWW-Curl-4.05/t/16formpost.t [ 21s] -rw-rw-r-- root/root 2236 2013-07-01 18:58 perl-WWW-Curl-4.05/t/17slist.t [ 21s] -rw-rw-r-- root/root 1547 2013-07-01 18:58 perl-WWW-Curl-4.05/t/18twinhandles.t [ 21s] -rw-rw-r-- root/root 134 2013-07-01 18:58 perl-WWW-Curl-4.05/t/meta.t [ 21s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/ [ 21s] -rw-rw-r-- root/root 95 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/00constants.t [ 21s] -rw-rw-r-- root/root 407 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/01basic.t [ 21s] -rw-rw-r-- root/root 456 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/02header-callback.t [ 21s] -rw-rw-r-- root/root 454 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/03body-callback.t [ 21s] -rw-rw-r-- root/root 422 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/04abort.t [ 21s] -rw-rw-r-- root/root 668 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/05progress.t [ 21s] -rw-rw-r-- root/root 727 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/06http-post.t [ 21s] -rw-rw-r-- root/root 205 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/07errbuf.t [ 21s] -rw-rw-r-- root/root 443 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/08duphandle.t [ 21s] -rw-rw-r-- root/root 489 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/09duphandle-callback.t [ 21s] -rw-rw-r-- root/root 1269 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/10multi-callback.t [ 21s] -rw-rw-r-- root/root 381 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/README [ 21s] -rw-rw-r-- root/root 232 2013-07-01 18:58 perl-WWW-Curl-4.05/t/pod-coverage.t [ 21s] -rw-rw-r-- root/root 140 2013-07-01 18:58 perl-WWW-Curl-4.05/t/pod.t [ 21s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/template/ [ 21s] -rw-rw-r-- root/root 1095 2013-07-01 18:58 perl-WWW-Curl-4.05/template/Easy.pm.tmpl [ 21s] -rw-rw-r-- root/root 763 2013-07-01 18:58 perl-WWW-Curl-4.05/template/Share.pm.tmpl [ 21s] -rw-rw-r-- root/root 110 2013-07-01 18:58 perl-WWW-Curl-4.05/typemap [ 21s] + STATUS=0 [ 21s] + '[' 0 -ne 0 ']' [ 21s] + cd perl-WWW-Curl-4.05 [ 21s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 21s] + cp /home/abuild/rpmbuild/SOURCES/perl-WWW-Curl.manifest . [ 21s] + chmod -R u+w /home/abuild/rpmbuild/BUILD/perl-WWW-Curl-4.05 [ 21s] + exit 0 [ 21s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.FBCDhg [ 21s] + umask 022 [ 21s] + cd /home/abuild/rpmbuild/BUILD [ 21s] + cd perl-WWW-Curl-4.05 [ 21s] ++ uname -m [ 21s] + [[ i686 == \a\a\r\c\h\6\4 ]] [ 21s] + LANG=C [ 21s] + export LANG [ 21s] + unset DISPLAY [ 21s] + CFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 21s] + export CFLAGS [ 21s] + CXXFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 21s] + export CXXFLAGS [ 21s] + FFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I%_fmoddir' [ 21s] + export FFLAGS [ 21s] + LD_AS_NEEDED=1 [ 21s] + export LD_AS_NEEDED [ 21s] + grep -rsl '^#!.*perl' . [ 21s] + grep -v '.bak$' [ 21s] + xargs --no-run-if-empty /bin/perl -MExtUtils::MakeMaker -e 'MY->fixin(@ARGV)' [ 21s] + CFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 21s] ++ /bin/perl -MExtUtils::MakeMaker -e ' print qq|PREFIX=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386/usr| if $ExtUtils::MakeMaker::VERSION =~ /5\.9[1-6]|6\.0[0-5]/ ' [ 21s] + /bin/perl Makefile.PL [ 21s] Locating required external dependency bin:curl-config... found at /bin/curl-config. [ 21s] Found curl.h in /usr/include/curl/curl.h [ 21s] Building curlopt-constants.c for your libcurl version [ 21s] Building Easy.pm constants for your libcurl version [ 21s] Building Share.pm constants for your libcurl version [ 21s] Checking if your kit is complete... [ 21s] Looks good [ 21s] Generating a Unix-style Makefile [ 21s] Writing Makefile for WWW::Curl [ 21s] Writing MYMETA.yml and MYMETA.json [ 21s] + /bin/make [ 21s] cp lib/WWW/Curl/Share.pm blib/lib/WWW/Curl/Share.pm [ 21s] AutoSplitting blib/lib/WWW/Curl/Share.pm (blib/lib/auto/WWW/Curl/Share) [ 21s] cp lib/WWW/Curl.pm blib/lib/WWW/Curl.pm [ 21s] cp lib/WWW/Curl/Easy.pm blib/lib/WWW/Curl/Easy.pm [ 21s] AutoSplitting blib/lib/WWW/Curl/Easy.pm (blib/lib/auto/WWW/Curl/Easy) [ 21s] cp lib/WWW/Curl/Form.pm blib/lib/WWW/Curl/Form.pm [ 21s] cp lib/WWW/Curl/Multi.pm blib/lib/WWW/Curl/Multi.pm [ 21s] Running Mkbootstrap for WWW::Curl () [ 21s] chmod 644 Curl.bs [ 21s] /usr/bin/perl "-Iinc" /usr/lib/perl5/5.20.0/ExtUtils/xsubpp -typemap /usr/lib/perl5/5.20.0/ExtUtils/typemap -typemap typemap Curl.xs > Curl.xsc && mv Curl.xsc Curl.c [ 21s] cc -c -I/usr/include -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -Wall -pipe -DVERSION=\"4.05\" -DXS_VERSION=\"4.05\" -fPIC "-I/usr/lib/perl5/5.20.0/i586-linux-thread-multi/CORE" Curl.c [ 22s] Curl.xs: In function 'fwrite_wrapper2': [ 22s] Curl.xs:341:13: warning: unused variable 'sv' [-Wunused-variable] [ 22s] SV *sv; [ 22s] ^ [ 22s] In file included from Curl.xs:16:0: [ 22s] Curl.c: In function 'XS_WWW__Curl__Easy_init': [ 22s] /usr/lib/perl5/5.20.0/i586-linux-thread-multi/CORE/XSUB.h:183:20: warning: unused variable 'ix' [-Wunused-variable] [ 22s] #define dXSI32 I32 ix = XSANY.any_i32 [ 22s] ^ [ 22s] Curl.c:747:5: note: in expansion of macro 'dXSI32' [ 22s] dXSI32; [ 22s] ^ [ 22s] Curl.c: In function 'XS_WWW__Curl__Easy_version': [ 22s] /usr/lib/perl5/5.20.0/i586-linux-thread-multi/CORE/XSUB.h:164:20: warning: unused variable 'items' [-Wunused-variable] [ 22s] #define dITEMS I32 items = (I32)(SP - MARK) [ 22s] ^ [ 22s] /usr/lib/perl5/5.20.0/i586-linux-thread-multi/CORE/XSUB.h:172:16: note: in expansion of macro 'dITEMS' [ 22s] dSP; dAXMARK; dITEMS [ 22s] ^ [ 22s] Curl.c:865:11: note: in expansion of macro 'dXSARGS' [ 22s] dVAR; dXSARGS; [ 22s] ^ [ 22s] Curl.c: In function 'XS_WWW__Curl__Easy_internal_setopt': [ 22s] Curl.c:1064:6: warning: unused variable 'value' [-Wunused-variable] [ 22s] int value = (int)SvIV(ST(2)) [ 22s] ^ [ 22s] Curl.c:1062:6: warning: unused variable 'option' [-Wunused-variable] [ 22s] int option = (int)SvIV(ST(1)) [ 22s] ^ [ 22s] Curl.c:1061:18: warning: variable 'self' set but not used [-Wunused-but-set-variable] [ 22s] WWW__Curl__Easy self; [ 22s] ^ [ 22s] Curl.c: In function 'XS_WWW__Curl__Easy_cleanup': [ 22s] Curl.c:1220:18: warning: variable 'self' set but not used [-Wunused-but-set-variable] [ 22s] WWW__Curl__Easy self; [ 22s] ^ [ 22s] Curl.c: In function 'XS_WWW__Curl__Easy_strerror': [ 22s] Curl.c:1291:18: warning: variable 'self' set but not used [-Wunused-but-set-variable] [ 22s] WWW__Curl__Easy self; [ 22s] ^ [ 22s] Curl.c: In function 'XS_WWW__Curl__Form_add': [ 22s] Curl.c:1364:9: warning: unused variable 'value' [-Wunused-variable] [ 22s] char * value = (char *)SvPV_nolen(ST(2)) [ 22s] ^ [ 22s] Curl.c:1362:9: warning: unused variable 'name' [-Wunused-variable] [ 22s] char * name = (char *)SvPV_nolen(ST(1)) [ 22s] ^ [ 22s] Curl.c:1361:18: warning: variable 'self' set but not used [-Wunused-but-set-variable] [ 22s] WWW__Curl__Form self; [ 22s] ^ [ 22s] Curl.c: In function 'XS_WWW__Curl__Form_addfile': [ 22s] Curl.c:1401:9: warning: unused variable 'type' [-Wunused-variable] [ 22s] char * type = (char *)SvPV_nolen(ST(3)) [ 22s] ^ [ 22s] Curl.c:1399:9: warning: unused variable 'description' [-Wunused-variable] [ 22s] char * description = (char *)SvPV_nolen(ST(2)) [ 22s] ^ [ 22s] Curl.c:1397:9: warning: unused variable 'filename' [-Wunused-variable] [ 22s] char * filename = (char *)SvPV_nolen(ST(1)) [ 22s] ^ [ 22s] Curl.c:1396:18: warning: variable 'self' set but not used [-Wunused-but-set-variable] [ 22s] WWW__Curl__Form self; [ 22s] ^ [ 22s] Curl.c: In function 'XS_WWW__Curl__Multi_strerror': [ 22s] Curl.c:1706:19: warning: variable 'self' set but not used [-Wunused-but-set-variable] [ 22s] WWW__Curl__Multi self; [ 22s] ^ [ 22s] Curl.c: In function 'XS_WWW__Curl__Share_strerror': [ 22s] Curl.c:1874:19: warning: variable 'self' set but not used [-Wunused-but-set-variable] [ 22s] WWW__Curl__Share self; [ 22s] ^ [ 23s] rm -f blib/arch/auto/WWW/Curl/Curl.so [ 23s] LD_RUN_PATH="/usr/lib" cc -shared -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -Wall -pipe Curl.o -o blib/arch/auto/WWW/Curl/Curl.so \ [ 23s] -lcurl -lcares -lidn -lssl -lcrypto -lssl -lcrypto -lz \ [ 23s] [ 23s] chmod 755 blib/arch/auto/WWW/Curl/Curl.so [ 23s] /usr/bin/perl "-Iinc" -MExtUtils::Command::MM -e 'cp_nonempty' -- Curl.bs blib/arch/auto/WWW/Curl/Curl.bs 644 [ 23s] Manifying blib/man3/WWW::Curl.3pm [ 23s] + exit 0 [ 23s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.FaoBCp [ 23s] + umask 022 [ 23s] + cd /home/abuild/rpmbuild/BUILD [ 23s] + cd perl-WWW-Curl-4.05 [ 23s] + LANG=C [ 23s] + export LANG [ 23s] + unset DISPLAY [ 23s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386 [ 23s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386 [ 23s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386 '!=' / ']' [ 23s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386 [ 23s] ++ /bin/perl -MExtUtils::MakeMaker -e ' print $ExtUtils::MakeMaker::VERSION <= 6.05 ? qq|PREFIX=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386/usr| : qq|DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386| ' [ 23s] + /bin/make prefix=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386/usr exec_prefix=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386/usr bindir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386/usr/bin sbindir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386/usr/sbin sysconfdir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386/etc datadir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386/usr/share includedir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386/usr/include libdir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386/usr/lib libexecdir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386/usr/libexec localstatedir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386/var sharedstatedir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386/usr/com mandir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386/usr/share/man infodir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386/usr/share/info install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386 [ 23s] Running Mkbootstrap for WWW::Curl () [ 23s] chmod 644 Curl.bs [ 24s] Files found in blib/arch: installing files in blib/lib into architecture dependent library tree [ 24s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386/usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/auto/WWW/Curl/Curl.so [ 24s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386/usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/auto/WWW/Curl/Easy/autosplit.ix [ 24s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386/usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/auto/WWW/Curl/Share/autosplit.ix [ 24s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386/usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/WWW/Curl.pm [ 24s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386/usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/WWW/Curl/Easy.pm [ 24s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386/usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/WWW/Curl/Multi.pm [ 24s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386/usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/WWW/Curl/Share.pm [ 24s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386/usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/WWW/Curl/Form.pm [ 24s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386/usr/share/man/man3/WWW::Curl.3pm [ 24s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386/usr/lib/perl5/5.20.0/i586-linux-thread-multi/perllocal.pod [ 24s] + cmd=/usr/share/spec-helper/compress_files [ 24s] + '[' -x /usr/share/spec-helper/compress_files ']' [ 24s] + cmd=/usr/lib/rpm/brp-compress [ 24s] + '[' -x /usr/lib/rpm/brp-compress ']' [ 24s] + /usr/lib/rpm/brp-compress [ 24s] + '[' -e /etc/SuSE-release -o -e /etc/UnitedLinux-release ']' [ 24s] + find /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386 -name perllocal.pod -o -name .packlist -o -name '*.bs' [ 24s] + xargs -i rm -f '{}' [ 24s] + find /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386/usr -type d -depth -exec rmdir '{}' ';' [ 24s] + /bin/perl -MFile::Find -le ' [ 24s] find({ wanted => \&wanted, no_chdir => 1}, "/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386"); [ 24s] print "%doc README.Win32 template inc Changes README LICENSE"; [ 24s] for my $x (sort @dirs, @files) { [ 24s] push @ret, $x unless indirs($x); [ 24s] } [ 24s] print join "\n", sort @ret; [ 24s] [ 24s] sub wanted { [ 24s] return if /auto$/; [ 24s] [ 24s] local $_ = $File::Find::name; [ 24s] my $f = $_; s|^\Q/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386\E||; [ 24s] return unless length; [ 24s] return $files[@files] = $_ if -f $f; [ 24s] [ 24s] $d = $_; [ 24s] /\Q$d\E/ && return for reverse sort @INC; [ 24s] $d =~ /\Q$_\E/ && return [ 24s] for qw|/etc /usr/man /usr/bin /usr/share|; [ 24s] [ 24s] $dirs[@dirs] = $_; [ 24s] } [ 24s] [ 24s] sub indirs { [ 24s] my $x = shift; [ 24s] $x =~ /^\Q$_\E\// && $x ne $_ && return 1 for @dirs; [ 24s] } [ 24s] ' [ 24s] + '[' -z WWW-Curl-4.05-filelist ']' [ 24s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/perl-WWW-Curl-4.05 [ 24s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386/usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/auto/WWW/Curl/Curl.so [ 24s] cpio: glibc-2.21/csu: Cannot stat: No such file or directory [ 24s] cpio: glibc-2.21/sysdeps/i386/crti.S: Cannot stat: No such file or directory [ 24s] cpio: glibc-2.21/sysdeps/i386/crtn.S: Cannot stat: No such file or directory [ 24s] 217 blocks [ 24s] + /usr/lib/rpm/brp-compress [ 24s] + /usr/lib/rpm/brp-tizen [ 24s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386 [ 24s] Processing files: perl-WWW-Curl-4.05-5.3.i686 [ 24s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 24s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 24s] [ 24s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.RqEZeA [ 24s] + umask 022 [ 24s] + cd /home/abuild/rpmbuild/BUILD [ 24s] + cd perl-WWW-Curl-4.05 [ 24s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386/usr/share/doc/packages/perl-WWW-Curl [ 24s] + export DOCDIR [ 24s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386/usr/share/doc/packages/perl-WWW-Curl [ 24s] + cp -pr README.Win32 /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386/usr/share/doc/packages/perl-WWW-Curl [ 24s] + cp -pr template /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386/usr/share/doc/packages/perl-WWW-Curl [ 24s] + cp -pr inc /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386/usr/share/doc/packages/perl-WWW-Curl [ 24s] + cp -pr Changes /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386/usr/share/doc/packages/perl-WWW-Curl [ 24s] + cp -pr README /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386/usr/share/doc/packages/perl-WWW-Curl [ 24s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386/usr/share/doc/packages/perl-WWW-Curl [ 24s] + exit 0 [ 24s] Provides: Curl.so perl(Module::Install) = 0.75 perl(Module::Install::Base) = 0.75 perl(Module::Install::Base::FakeAdmin) perl(Module::Install::Can) = 0.75 perl(Module::Install::External) = 0.75 perl(Module::Install::MakeMaker) = 0.75 perl(Module::Install::Makefile) = 0.75 perl(Module::Install::Metadata) = 0.75 perl(WWW::Curl) = 4.05 perl(WWW::Curl::Easy) = 4.05 perl(WWW::Curl::Form) perl(WWW::Curl::Multi) perl(WWW::Curl::Share) perl-WWW-Curl = 4.05-5.3 perl-WWW-Curl(x86-32) = 4.05-5.3 [ 24s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 24s] Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1.3) libcares.so.2 libcrypto.so.1.0.0 libcurl.so.4 libcurl.so.4(CURL_OPENSSL_4) libidn.so.11 libssl.so.1.0.0 libz.so.1 [ 24s] Processing files: perl-WWW-Curl-debugsource-4.05-5.3.i686 [ 24s] Provides: perl-WWW-Curl-debugsource = 4.05-5.3 perl-WWW-Curl-debugsource(x86-32) = 4.05-5.3 [ 24s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 24s] Processing files: perl-WWW-Curl-debuginfo-4.05-5.3.i686 [ 24s] Provides: debuginfo(build-id) = d87ace9304a5f140d96fd5724ed7e786ee49a6c1 [ 24s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 24s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386 [ 24s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-WWW-Curl-4.05-5.3.src.rpm [ 24s] Wrote: /home/abuild/rpmbuild/RPMS/i686/perl-WWW-Curl-4.05-5.3.i686.rpm [ 24s] Wrote: /home/abuild/rpmbuild/RPMS/i686/perl-WWW-Curl-debugsource-4.05-5.3.i686.rpm [ 24s] Wrote: /home/abuild/rpmbuild/RPMS/i686/perl-WWW-Curl-debuginfo-4.05-5.3.i686.rpm [ 24s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.rOMV6t [ 24s] + umask 022 [ 24s] + cd /home/abuild/rpmbuild/BUILD [ 24s] + cd perl-WWW-Curl-4.05 [ 24s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386 [ 24s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386 '!=' / ']' [ 24s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.3.i386 [ 24s] + exit 0 [ 24s] ... checking for files with abuild user/group [ 24s] [ 24s] RPMLINT report: [ 24s] =============== [ 25s] perl-WWW-Curl.i686: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/WWW/Curl/Easy.pm is not allowed in Tizen [ 25s] perl-WWW-Curl.i686: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/WWW/Curl is not allowed in Tizen [ 25s] perl-WWW-Curl.i686: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/auto/WWW/Curl/Share is not allowed in Tizen [ 25s] perl-WWW-Curl.i686: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/WWW/Curl/Share.pm is not allowed in Tizen [ 25s] perl-WWW-Curl.i686: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/auto/WWW/Curl/Easy/autosplit.ix is not allowed in Tizen [ 25s] perl-WWW-Curl.i686: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/auto/WWW is not allowed in Tizen [ 25s] perl-WWW-Curl.i686: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/WWW/Curl/Form.pm is not allowed in Tizen [ 25s] perl-WWW-Curl.i686: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/auto/WWW/Curl/Share/autosplit.ix is not allowed in Tizen [ 25s] perl-WWW-Curl.i686: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/auto/WWW/Curl is not allowed in Tizen [ 25s] perl-WWW-Curl.i686: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/WWW is not allowed in Tizen [ 25s] perl-WWW-Curl.i686: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/auto/WWW/Curl/Easy is not allowed in Tizen [ 25s] perl-WWW-Curl.i686: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/auto/WWW/Curl/Curl.so is not allowed in Tizen [ 25s] perl-WWW-Curl.i686: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/WWW/Curl.pm is not allowed in Tizen [ 25s] perl-WWW-Curl.i686: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/WWW/Curl/Multi.pm is not allowed in Tizen [ 25s] perl files installed a non-vendor installed path, [ 25s] which is not allowed in SUSE. [ 25s] [ 25s] perl-WWW-Curl.i686: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/WWW/Curl/Easy.pm [ 25s] perl-WWW-Curl.i686: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/WWW/Curl [ 25s] perl-WWW-Curl.i686: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/auto/WWW/Curl/Share [ 25s] perl-WWW-Curl.i686: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/WWW/Curl/Share.pm [ 25s] perl-WWW-Curl.i686: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/auto/WWW/Curl/Easy/autosplit.ix [ 25s] perl-WWW-Curl.i686: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/auto/WWW [ 25s] perl-WWW-Curl.i686: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/WWW/Curl/Form.pm [ 25s] perl-WWW-Curl.i686: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/auto/WWW/Curl/Share/autosplit.ix [ 25s] perl-WWW-Curl.i686: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/auto/WWW/Curl [ 25s] perl-WWW-Curl.i686: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/WWW [ 25s] perl-WWW-Curl.i686: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/auto/WWW/Curl/Easy [ 25s] perl-WWW-Curl.i686: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/auto/WWW/Curl/Curl.so [ 25s] perl-WWW-Curl.i686: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/WWW/Curl.pm [ 25s] perl-WWW-Curl.i686: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/WWW/Curl/Multi.pm [ 25s] This perl module package installs files under the subdirectory site_perl, [ 25s] while they must appear under vendor_perl. [ 25s] [ 25s] perl-WWW-Curl.src:56: W: rpm-buildroot-usage %build %{__perl} Makefile.PL `%{__perl} -MExtUtils::MakeMaker -e ' print qq|PREFIX=%{buildroot}%{_prefix}| if \$ExtUtils::MakeMaker::VERSION =~ /5\.9[1-6]|6\.0[0-5]/ '` [ 25s] $RPM_BUILD_ROOT should not be touched during %build or %prep stage, as it may [ 25s] break short circuit builds. [ 25s] [ 25s] perl-WWW-Curl.i686: E: non-standard-group (Badness: 200) Applications/CPAN [ 25s] perl-WWW-Curl.src: E: non-standard-group (Badness: 200) Applications/CPAN [ 25s] The value of the Group tag in the package is not valid. Valid groups are [ 25s] listed here: https://wiki.tizen.org/wiki/Packaging/Guidelines#Group_Tag [ 25s] [ 25s] perl-WWW-Curl.i686: W: non-linux-readme /usr/share/doc/packages/perl-WWW-Curl/README.Win32 [ 25s] Your package contains a file that contains instructions for non-linux [ 25s] platforms. They're most likely unneccessary bloat, consider removing them [ 25s] from your package. [ 25s] [ 25s] perl-WWW-Curl.src:59: W: make-check-outside-check-section %{__make} test [ 25s] Make check or other automated regression test should be run in %check, as they [ 25s] can be disabled with a rpm macro for short circuiting purposes. [ 25s] [ 25s] perl-WWW-Curl.i686: E: license-file-in-docs (Badness: 200) /usr/share/doc/packages/perl-WWW-Curl/LICENSE [ 25s] A file whose name suggests that it contains a license is included in the [ 25s] package as a document. Such files need to be marked with %license and not with [ 25s] %doc, which will install them in a special directory seperated from the [ 25s] documentation. [ 25s] [ 25s] perl-WWW-Curl.i686: E: invalid-license (Badness: 200) Artistic [ 25s] perl-WWW-Curl.src: E: invalid-license (Badness: 200) Artistic [ 25s] The specified license string is not recognized. Please refer to [ 25s] http://spdx.org/licenses/ for the list of known licences and their exact [ 25s] spelling. [ 25s] [ 25s] perl-WWW-Curl.src:20: W: hardcoded-packager-tag Arix [ 25s] The Packager tag is hardcoded in your spec file. It should be removed, so as [ 25s] to use rebuilder's own defaults. [ 25s] [ 25s] perl-WWW-Curl.i686: W: explicit-lib-dependency libcurl [ 25s] You must let rpm find the library dependencies by itself. Do not put unneeded [ 25s] explicit Requires: tags. [ 25s] [ 25s] 2 packages and 0 specfiles checked; 5 errors, 33 warnings. [ 25s] [ 25s] ... creating baselibs [ 25s] ... comparing built packages with the former built [ 25s] /usr/lib/build/pkg-diff.sh [ 25s] compare /.build.oldpackages/perl-WWW-Curl-4.05-5.2.src.rpm /home/abuild/rpmbuild/SRPMS/perl-WWW-Curl-4.05-5.3.src.rpm [ 25s] comparing rpmtags [ 25s] comparing RELEASE [ 25s] comparing PROVIDES [ 25s] comparing scripts [ 25s] comparing filelist [ 25s] comparing file checksum [ 25s] RPM meta information is identical [ 25s] compare /.build.oldpackages/perl-WWW-Curl-4.05-5.2.i686.rpm /home/abuild/rpmbuild/RPMS/i686/perl-WWW-Curl-4.05-5.3.i686.rpm [ 25s] Comparing perl-WWW-Curl-4.05-5.2.i686.rpm to perl-WWW-Curl-4.05-5.3.i686.rpm [ 25s] comparing rpmtags [ 25s] comparing RELEASE [ 25s] comparing PROVIDES [ 25s] comparing scripts [ 25s] comparing filelist [ 25s] comparing file checksum [ 25s] creating rename script [ 25s] RPM file checksum differs. [ 25s] Extracting packages [ 26s] /usr/lib/perl5/site_perl/5.20.0/i586-linux-thread-multi/auto/WWW/Curl/Curl.so differs in ELF section .comment [ 26s] --- /tmp/tmp.WYQq6f6iw7/tmp.gDjT7oH521 2015-06-23 12:16:52.974580887 +0000 [ 26s] +++ /tmp/tmp.WYQq6f6iw7/tmp.guHcSFMUIa 2015-06-23 12:16:52.974580887 +0000 [ 26s] @@ -3,4 +3,4 @@ [ 26s] [ 26s] Contents of section .comment: [ 26s] 0000 4743433a 20285469 7a656e29 20342e39 GCC: (Tizen) 4.9 [ 26s] - 0010 00 . [ 26s] + 0010 2e3200 .2. [ 26s] compare /.build.oldpackages/perl-WWW-Curl-debuginfo-4.05-5.2.i686.rpm /home/abuild/rpmbuild/RPMS/i686/perl-WWW-Curl-debuginfo-4.05-5.3.i686.rpm [ 26s] skipping -debuginfo package [ 26s] compare /.build.oldpackages/perl-WWW-Curl-debugsource-4.05-5.2.i686.rpm /home/abuild/rpmbuild/RPMS/i686/perl-WWW-Curl-debugsource-4.05-5.3.i686.rpm [ 26s] Comparing perl-WWW-Curl-debugsource-4.05-5.2.i686.rpm to perl-WWW-Curl-debugsource-4.05-5.3.i686.rpm [ 26s] comparing rpmtags [ 26s] comparing RELEASE [ 26s] comparing PROVIDES [ 26s] comparing scripts [ 26s] comparing filelist [ 26s] comparing file checksum [ 26s] creating rename script [ 26s] RPM meta information is identical [ 26s] comparing /.build.oldpackages/rpmlint.log and /home/abuild/rpmbuild/OTHER/rpmlint.log [ 26s] ... saving built statistics [ 26s] ... saving built packages [ 26s] /home/abuild/rpmbuild/RPMS/i686/perl-WWW-Curl-4.05-5.3.i686.rpm [ 26s] /home/abuild/rpmbuild/RPMS/i686/perl-WWW-Curl-debuginfo-4.05-5.3.i686.rpm [ 26s] /home/abuild/rpmbuild/RPMS/i686/perl-WWW-Curl-debugsource-4.05-5.3.i686.rpm [ 26s] /home/abuild/rpmbuild/SRPMS/perl-WWW-Curl-4.05-5.3.src.rpm [ 26s] /home/abuild/rpmbuild/OTHER/_statistics [ 26s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 26s] [ 26s] w16 finished "build perl-WWW-Curl.spec" at Tue Jun 23 12:16:53 UTC 2015. [ 26s] [ 27s] /.build/build: line 368: 212 Killed background_monitor_process [ 33s] [ 26.425641] SysRq : Power Off [ 33s] [ 26.636164] Power down. [ 33s] build: extracting built packages... [ 33s] perl-WWW-Curl-4.05-5.3.i686.rpm [ 33s] perl-WWW-Curl-debuginfo-4.05-5.3.i686.rpm [ 33s] perl-WWW-Curl-debugsource-4.05-5.3.i686.rpm [ 33s] perl-WWW-Curl-4.05-5.3.src.rpm [ 33s] _statistics [ 33s] rpmlint.log