[ 0s] Using BUILD_ROOT=/srv/build/root_1/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_1/root [ 0s] [ 0s] [ 0s] w11 started "build _service:gbs:poppler.spec" at Tue Jun 23 13:23:43 UTC 2015. [ 0s] [ 0s] Building poppler for project 'Tizen:3.0.2015.Q2:Common' repository 'emulator32-wayland' arch 'i586' srcmd5 'e17d94831b885fa262a5323b55dd6de7' [ 0s] [ 0s] processing specfile /srv/build/root_1/.build-srcdir/_service:gbs:poppler.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_1/.build-srcdir/_service:gbs:poppler.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_1/.build.rpmlist /srv/build/root_1/.build-srcdir/_service:gbs:poppler.spec build rpmlint-Factory ... [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/34] preinstalling libmagic-data... [ 0s] [2/34] preinstalling setup... [ 0s] [3/34] preinstalling filesystem... [ 0s] [4/34] preinstalling glibc... [ 0s] [5/34] preinstalling bash... [ 0s] [6/34] preinstalling diffutils... [ 0s] [7/34] preinstalling libattr... [ 0s] [8/34] preinstalling libbz2... [ 0s] [9/34] preinstalling libelf... [ 1s] [10/34] preinstalling libfreebl3... [ 1s] [11/34] preinstalling libgcc_s1... [ 1s] [12/34] preinstalling liblua... [ 1s] [13/34] preinstalling liblzma... [ 1s] [14/34] preinstalling libncurses... [ 1s] [15/34] preinstalling libpopt... [ 1s] [16/34] preinstalling libsmack... [ 1s] [17/34] preinstalling libsqlite... [ 1s] [18/34] preinstalling nspr... [ 1s] [19/34] preinstalling sed... [ 1s] [20/34] preinstalling tar... [ 1s] [21/34] preinstalling zlib... [ 1s] [22/34] preinstalling grep... [ 1s] [23/34] preinstalling libacl... [ 1s] [24/34] preinstalling libcap... [ 1s] [25/34] preinstalling libreadline... [ 1s] [26/34] preinstalling smack... [ 1s] [27/34] preinstalling bzip2... [ 1s] [28/34] preinstalling libmagic... [ 1s] [29/34] preinstalling libxml2... [ 1s] [30/34] preinstalling util-linux... [ 1s] [31/34] preinstalling coreutils... [ 1s] [32/34] preinstalling nss... [ 1s] [33/34] preinstalling libsoftokn3... [ 1s] [34/34] preinstalling rpm... [ 2s] [ 2s] [1/9] preinstalling libext2fs... [ 2s] [2/9] preinstalling libpcre... [ 2s] [3/9] preinstalling libsmartcols... [ 2s] [4/9] preinstalling libuuid... [ 2s] [5/9] preinstalling perl... [ 2s] [6/9] preinstalling grep... [ 2s] [7/9] preinstalling libblkid... [ 3s] [8/9] preinstalling libmount... [ 3s] [9/9] preinstalling util-linux... [ 3s] copying packages... [ 3s] reordering...cycle: gcc49-locale -> gcc49 [ 3s] breaking dependency gcc49 -> gcc49-locale [ 3s] cycle: coreutils -> pam [ 3s] breaking dependency pam -> coreutils [ 3s] cycle: gio-branding-upstream -> libgio [ 3s] breaking dependency libgio -> gio-branding-upstream [ 3s] cycle: nss -> libsoftokn3 [ 3s] breaking dependency nss -> libsoftokn3 [ 3s] done [ 5s] booting kvm ... [ 5s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 8000 -drive file=/srv/build/root_1/root,if=virtio,cache=none -drive file=/srv/build/root_1/root,if=ide,index=0,cache=none -drive file=/srv/build/root_1/swap,if=virtio,cache=none -smp 4 [ 8s] doing fast boot [ 8s] Creating device nodes with udev [ 11s] Waiting for device /dev/vda to appear: ok [ 11s] fsck from util-linux 2.21.2 [ 11s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 11s] /dev/vda: clean, 4556/2392064 files, 198671/9568256 blocks [ 11s] fsck succeeded. Mounting root device read-write. [ 11s] Mounting root /dev/vda [ 11s] mount -o rw -t ext4 /dev/vda /root [ 12s] replacing /etc/mtab with symlink to /proc/self/mounts [ 14s] 2nd stage started in virtual machine [ 14s] machine type: x86_64 [ 14s] switching personality to 8... [ 14s] 2nd stage started in virtual machine [ 14s] machine type: i686 [ 14s] swapon /dev/vdb [ 14s] swapon: /dev/vdb: found swap signature: version 1d, page-size 4, same byte order [ 14s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 14s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 14s] mount: none is already mounted or /proc busy [ 14s] mount: none is already mounted or /dev/pts busy [ 14s] logging output to //.build.log... [ 14s] processing specfile /.build-srcdir/_service:gbs:poppler.spec ... [ 14s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:poppler.spec build rpmlint-Factory ... [ 14s] running setup postinstall script [ 14s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 14s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 14s] initializing rpm db... [ 14s] [1/157] installing libmagic-data-5.18-8.3 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [2/157] installing libstdc++-locale-4.9.2-12.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [3/157] installing setup-0.9-10.5 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [4/157] installing terminfo-base-5.9-6.5 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [5/157] installing filesystem-3.1-11.1 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [6/157] installing glibc-2.21-8.22 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [7/157] installing bash-4.3.30-16.7 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [8/157] installing cpio-2.11-7.3 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [9/157] installing diffutils-3.3-7.3 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [10/157] installing findutils-4.5.14-7.3 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [11/157] installing gawk-4.1.1-7.5 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [12/157] installing hostname-3.12-6.3 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [13/157] installing libatomic-4.9.2-12.1 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [14/157] installing libattr-2.4.47-8.3 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [15/157] installing libbz2-1.0.6-6.19 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [16/157] installing libcares-1.10.0-8.3 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [17/157] installing libcms2-2.4-6.3 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [18/157] installing libdrm-2.4.58-13.3 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [19/157] installing libelf-0.160-7.8 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [20/157] installing libelf0-0.8.13-6.3 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [21/157] installing libexpat-2.1.0-6.3 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [22/157] installing libext2fs-1.42.11-9.3 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [23/157] installing libffi-3.1-6.3 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [24/157] installing libfreebl3-3.17.2-12.30 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [25/157] installing libgcc_s1-4.9.2-12.1 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [26/157] installing libgdbm-1.11-8.5 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [27/157] installing libgmp-6.0.0-7.5 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [28/157] installing libgomp-4.9.2-12.1 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [29/157] installing libitm-4.9.2-12.1 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [30/157] installing libjpeg-8.0.2-8.6 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [31/157] installing libltdl-2.4.2-6.5 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [32/157] installing liblua-5.1.4-8.5 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [33/157] installing liblzma-5.1.3-7.5 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [34/157] installing libpcre-8.31-5.3 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [35/157] installing libpopt-1.16-5.4 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [36/157] installing libpython-2.7.8-7.5 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [37/157] installing libsmack-1.1.0-11.3 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [38/157] installing libsmartcols-2.25.2-10.7 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [39/157] installing libsqlite-3.7.14-10.3 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [40/157] installing libuuid-2.25.2-10.7 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [41/157] installing m4-1.4.17-7.3 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [42/157] installing mesa-libglapi-10.3-14.3 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [43/157] installing net-tools-2.0_20121208git-5.3 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [44/157] installing nspr-4.10.7-8.6 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [45/157] installing patch-2.7-5.3 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [46/157] installing pixman-0.32.6-6.3 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [47/157] installing pkg-config-0.28-6.3 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [48/157] installing sed-4.2.2-7.3 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [49/157] installing tar-1.27-5.3 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [50/157] installing update-alternatives-1.16.3-7.3 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [51/157] installing which-2.20-5.3 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [52/157] installing zlib-1.2.8-7.3 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [53/157] installing libncurses-5.9-6.5 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [54/157] installing build-compare-2015.04.28-10.7 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [55/157] installing gcc49-info-4.9.2-12.1 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [56/157] installing libjpeg-devel-8.0.2-8.6 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [57/157] installing less-466-7.3 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [58/157] installing libacl-2.2.52-8.3 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [59/157] installing libasm-0.160-7.8 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [60/157] installing libblkid-2.25.2-10.7 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [61/157] installing libcap-2.24-7.15 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [62/157] installing libfreetype-2.4.9-6.3 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [63/157] installing libglib-2.43.1-9.3 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [64/157] installing libidn-1.25-6.3 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [65/157] installing libmpfr-3.1.2-7.5 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [66/157] installing libopenssl-1.0.1l-10.9 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [67/157] installing libpciaccess-0.13.2-7.3 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [68/157] installing libpcreposix-8.31-5.3 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [69/157] installing libpng-1.6.13-7.3 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [70/157] installing libreadline-5.2-6.3 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [71/157] installing libwayland-client-1.7.0-10.3 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [72/157] installing libwayland-server-1.7.0-10.3 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [73/157] installing make-4.0-8.3 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [74/157] installing nss-certs-3.17.2-12.30 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [75/157] installing pixman-devel-0.32.6-6.3 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [76/157] installing smack-1.1.0-11.3 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [77/157] installing bzip2-1.0.6-6.19 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [78/157] installing grep-2.19-7.3 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [79/157] installing libmagic-5.18-8.3 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [80/157] installing libstdc++-4.9.2-12.1 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [81/157] installing libxml2-2.8.0-8.3 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [82/157] installing mesa-libGLESv2-10.3-14.3 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [83/157] installing xz-5.1.3-7.5 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [84/157] installing binutils-2.25-15.2 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] update-alternatives: using /usr/bin/ld.bfd to provide /usr/bin/ld (ld) in auto mode. [ 19s] [85/157] installing libdw-0.160-7.8 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [86/157] installing db4-4.8.30.NC-6.6 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [87/157] installing file-5.18-8.3 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [88/157] installing libasan-4.9.2-12.1 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [89/157] installing libcilkrts-4.9.2-12.1 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [90/157] installing libdrm-intel-2.4.58-13.3 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [91/157] installing libgmodule-2.43.1-9.3 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [92/157] installing libgthread-2.43.1-9.3 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [93/157] installing libmount-2.25.2-10.7 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [94/157] installing libmpc-1.0-5.4 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [95/157] installing libubsan-4.9.2-12.1 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [96/157] installing gettext-runtime-0.18.3.2-6.5 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [97/157] installing libgobject-2.43.1-9.3 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [98/157] installing libpcrecpp-8.31-5.3 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [99/157] installing libcurl-7.37.1-8.3 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [100/157] installing libllvm-3.5.0-9.5 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] [101/157] installing libtiff-4.0.3-7.3 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [102/157] installing elfutils-0.160-7.8 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [103/157] installing cpp49-4.9.2-12.1 [ 24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 24s] [104/157] installing perl-5.20.0-7.14 [ 34s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 35s] [105/157] installing python-2.7.8-7.5 [ 35s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 35s] [106/157] installing libgbm-10.3-14.3 [ 35s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 35s] [107/157] installing build-mkbaselibs-20120927-8.1 [ 35s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 35s] [108/157] installing cpp-4.9-8.1 [ 35s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 35s] [109/157] installing autoconf-2.69-7.1 [ 36s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 36s] [110/157] installing python-xml-2.7.8-7.5 [ 36s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 36s] [111/157] installing gettext-tools-0.18.3.2-6.5 [ 36s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 36s] [112/157] installing mesa-libEGL-10.3-14.3 [ 36s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 36s] [113/157] installing mesa-libEGL-devel-10.3-14.3 [ 36s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 36s] [114/157] installing build-20120927-8.1 [ 36s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 36s] [115/157] installing mesa-libGLESv2-devel-10.3-14.3 [ 36s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 36s] [116/157] installing pam-1.1.6-8.5 [ 37s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 37s] [117/157] installing nss-3.17.2-12.30 [ 37s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 37s] [118/157] installing libsoftokn3-3.17.2-12.30 [ 37s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 37s] [119/157] installing coreutils-8.21-9.3 [ 39s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 39s] [120/157] installing util-linux-2.25.2-10.7 [ 40s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 40s] [121/157] installing rpm-4.11.0.1-29.3 [ 40s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 40s] [122/157] installing linux-glibc-devel-3.10-7.1 [ 40s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 41s] [123/157] installing glibc-locale-2.21-8.22 [ 42s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 42s] [124/157] installing gzip-1.6-6.3 [ 42s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 42s] [125/157] installing automake-1.14.1-7.2 [ 42s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 43s] [126/157] installing tzdata-2014h-7.3 [ 43s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 43s] [127/157] installing fontconfig-2.11.1-7.3 [ 45s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 45s] [128/157] installing shared-mime-info-1.3-7.3 [ 46s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 46s] [129/157] installing rpmlint-mini-1.5-10.5 [ 46s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 46s] [130/157] installing rpmlint-tizen-1.0-5.1 [ 46s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 46s] [131/157] installing glibc-devel-2.21-8.22 [ 46s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 46s] [132/157] installing libtool-2.4.2-6.5 [ 46s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 46s] [133/157] installing libcairo-1.12.16-9.3 [ 46s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 46s] [134/157] installing libgio-2.43.1-9.3 [ 46s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 46s] [135/157] installing gio-branding-upstream-2.43.1-9.3 [ 46s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 46s] [136/157] installing libstdc++49-devel-4.9.2-12.1 [ 47s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 47s] [137/157] installing libidn-devel-1.25-6.3 [ 47s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 47s] [138/157] installing liblcms2-devel-2.4-6.3 [ 47s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 47s] [139/157] installing zlib-devel-1.2.8-7.3 [ 47s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 47s] [140/157] installing glib2-tools-2.43.1-9.3 [ 47s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 47s] [141/157] installing libcairo-script-interpreter-1.12.16-9.3 [ 47s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 47s] [142/157] installing libcairo-gobject-1.12.16-9.3 [ 47s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 47s] [143/157] installing gcc49-4.9.2-12.1 [ 48s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 48s] [144/157] installing gcc49-locale-4.9.2-12.1 [ 48s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 48s] [145/157] installing libstdc++-devel-4.9-8.1 [ 48s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 48s] [146/157] installing gcc-4.9-8.1 [ 48s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 48s] [147/157] installing freetype2-devel-2.4.9-6.3 [ 48s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 48s] [148/157] installing libcurl-devel-7.37.1-8.3 [ 48s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 48s] [149/157] installing libpng-devel-1.6.13-7.3 [ 48s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 49s] [150/157] installing gcc49-c++-4.9.2-12.1 [ 49s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 49s] [151/157] installing gcc-c++-4.9-8.1 [ 49s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 49s] [152/157] installing fontconfig-devel-2.11.1-7.3 [ 49s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 49s] [153/157] installing libtiff-devel-4.0.3-7.3 [ 49s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 49s] [154/157] installing pcre-devel-8.31-5.3 [ 49s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 49s] [155/157] installing rpm-build-4.11.0.1-29.3 [ 49s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 49s] [156/157] installing glib2-devel-2.43.1-9.3 [ 49s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 49s] [157/157] installing cairo-devel-1.12.16-9.3 [ 50s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 50s] removing nis flags from //etc/nsswitch.conf... [ 50s] now finalizing build dir... [ 51s] build target is i686-tizen-linux [ 51s] ----------------------------------------------------------------- [ 51s] I have the following modifications for poppler.spec: [ 51s] 25c25 [ 51s] < Release: 0 [ 51s] --- [ 51s] > Release: 7.3 [ 51s] 260a261 [ 51s] > %changelog [ 51s] ----------------------------------------------------------------- [ 51s] ----- building poppler.spec (user abuild) [ 51s] ----------------------------------------------------------------- [ 51s] ----------------------------------------------------------------- [ 51s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=i686-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0.2015.Q2:Common/emulator32-wayland/e17d94831b885fa262a5323b55dd6de7-poppler' /home/abuild/rpmbuild/SOURCES/poppler.spec [ 51s] Building target platforms: i686-tizen-linux [ 51s] Building for target i686-tizen-linux [ 51s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.puONsF [ 51s] + umask 022 [ 51s] + cd /home/abuild/rpmbuild/BUILD [ 51s] + cd /home/abuild/rpmbuild/BUILD [ 51s] + rm -rf poppler-0.26.5 [ 51s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/poppler-0.26.5.tar.gz [ 51s] + /bin/tar -xf - [ 51s] + STATUS=0 [ 51s] + '[' 0 -ne 0 ']' [ 51s] + cd poppler-0.26.5 [ 51s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 51s] + cp /home/abuild/rpmbuild/SOURCES/libpoppler-cpp.manifest . [ 51s] + cp /home/abuild/rpmbuild/SOURCES/libpoppler-glib.manifest . [ 51s] + cp /home/abuild/rpmbuild/SOURCES/libpoppler.manifest . [ 51s] + cp /home/abuild/rpmbuild/SOURCES/poppler-tools.manifest . [ 51s] + exit 0 [ 51s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.95sdEs [ 51s] + umask 022 [ 51s] + cd /home/abuild/rpmbuild/BUILD [ 51s] + cd poppler-0.26.5 [ 51s] ++ uname -m [ 51s] + [[ i686 == \a\a\r\c\h\6\4 ]] [ 51s] + LANG=C [ 51s] + export LANG [ 51s] + unset DISPLAY [ 51s] + CFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 51s] + export CFLAGS [ 51s] + CXXFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 51s] + export CXXFLAGS [ 51s] + FFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I%_fmoddir' [ 51s] + export FFLAGS [ 51s] + LD_AS_NEEDED=1 [ 51s] + export LD_AS_NEEDED [ 51s] + CFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 51s] + export CFLAGS [ 51s] + CXXFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 51s] + export CXXFLAGS [ 51s] + FFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I%_fmoddir' [ 51s] + export FFLAGS [ 51s] + ./configure --build=i686-tizen-linux-gnu --host=i686-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --localstatedir=/opt/var --sysconfdir=/opt/etc --datarootdir=/usr/share --enable-shared --disable-static --enable-libjpeg --disable-libopenjpeg --enable-libtiff --enable-largefile --enable-zlib --disable-libcurl --enable-libpng --enable-cairo-output --enable-splash-output --enable-poppler-glib --enable-introspection=auto --disable-gtk-doc --disable-gtk-doc-html --disable-gtk-doc-pdf --disable-poppler-qt4 --disable-poppler-qt5 --disable-gtk-test --enable-xpdf-headers --enable-compile-warnings=yes --enable-cms=lcms2 --without-x --with-font-configuration=fontconfig [ 51s] checking for a BSD-compatible install... /bin/install -c [ 51s] checking whether build environment is sane... yes [ 51s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 51s] checking for gawk... gawk [ 51s] checking whether make sets $(MAKE)... yes [ 51s] checking whether make supports nested variables... yes [ 51s] checking whether make supports nested variables... (cached) yes [ 51s] checking for style of include used by make... GNU [ 51s] checking for i686-tizen-linux-gnu-gcc... no [ 51s] checking for gcc... gcc [ 52s] checking whether the C compiler works... yes [ 52s] checking for C compiler default output file name... a.out [ 52s] checking for suffix of executables... [ 52s] checking whether we are cross compiling... no [ 52s] checking for suffix of object files... o [ 52s] checking whether we are using the GNU C compiler... yes [ 52s] checking whether gcc accepts -g... yes [ 52s] checking for gcc option to accept ISO C89... none needed [ 52s] checking whether gcc understands -c and -o together... yes [ 52s] checking dependency style of gcc... gcc3 [ 52s] checking how to run the C preprocessor... gcc -E [ 52s] checking for grep that handles long lines and -e... /bin/grep [ 52s] checking for egrep... /bin/grep -E [ 52s] checking for ANSI C header files... yes [ 52s] checking for sys/types.h... yes [ 52s] checking for sys/stat.h... yes [ 52s] checking for stdlib.h... yes [ 52s] checking for string.h... yes [ 52s] checking for memory.h... yes [ 52s] checking for strings.h... yes [ 52s] checking for inttypes.h... yes [ 52s] checking for stdint.h... yes [ 52s] checking for unistd.h... yes [ 52s] checking whether byte ordering is bigendian... no [ 52s] checking build system type... i686-tizen-linux-gnu [ 52s] checking host system type... i686-tizen-linux-gnu [ 52s] checking how to print strings... printf [ 52s] checking for a sed that does not truncate output... /bin/sed [ 52s] checking for fgrep... /bin/grep -F [ 52s] checking for ld used by gcc... /usr/i586-tizen-linux/bin/ld [ 52s] checking if the linker (/usr/i586-tizen-linux/bin/ld) is GNU ld... yes [ 52s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 52s] checking the name lister (/bin/nm -B) interface... BSD nm [ 52s] checking whether ln -s works... yes [ 52s] checking the maximum length of command line arguments... 1572864 [ 52s] checking whether the shell understands some XSI constructs... yes [ 52s] checking whether the shell understands "+="... yes [ 52s] checking how to convert i686-tizen-linux-gnu file names to i686-tizen-linux-gnu format... func_convert_file_noop [ 52s] checking how to convert i686-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 52s] checking for /usr/i586-tizen-linux/bin/ld option to reload object files... -r [ 52s] checking for i686-tizen-linux-gnu-objdump... objdump [ 52s] checking how to recognize dependent libraries... pass_all [ 52s] checking for i686-tizen-linux-gnu-dlltool... dlltool [ 52s] checking how to associate runtime and link libraries... printf %s\n [ 52s] checking for i686-tizen-linux-gnu-ar... no [ 52s] checking for ar... ar [ 52s] checking for archiver @FILE support... @ [ 52s] checking for i686-tizen-linux-gnu-strip... no [ 52s] checking for strip... strip [ 52s] checking for i686-tizen-linux-gnu-ranlib... no [ 52s] checking for ranlib... ranlib [ 52s] checking command to parse /bin/nm -B output from gcc object... ok [ 52s] checking for sysroot... no [ 52s] checking for i686-tizen-linux-gnu-mt... no [ 52s] checking for mt... no [ 52s] checking if : is a manifest tool... no [ 52s] checking for dlfcn.h... yes [ 52s] checking for objdir... .libs [ 53s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 53s] checking for gcc option to produce PIC... -fPIC -DPIC [ 53s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 53s] checking if gcc static flag -static works... no [ 53s] checking if gcc supports -c -o file.o... yes [ 53s] checking if gcc supports -c -o file.o... (cached) yes [ 53s] checking whether the gcc linker (/usr/i586-tizen-linux/bin/ld) supports shared libraries... yes [ 53s] checking whether -lc should be explicitly linked in... no [ 53s] checking dynamic linker characteristics... GNU/Linux ld.so [ 53s] checking how to hardcode library paths into programs... immediate [ 53s] checking whether stripping libraries is possible... yes [ 53s] checking if libtool supports shared libraries... yes [ 53s] checking whether to build shared libraries... yes [ 53s] checking whether to build static libraries... no [ 53s] checking for i686-tizen-linux-gnu-gcc... gcc [ 53s] checking whether we are using the GNU C compiler... (cached) yes [ 53s] checking whether gcc accepts -g... (cached) yes [ 53s] checking for gcc option to accept ISO C89... (cached) none needed [ 53s] checking whether gcc understands -c and -o together... (cached) yes [ 53s] checking dependency style of gcc... (cached) gcc3 [ 53s] checking for i686-tizen-linux-gnu-g++... no [ 53s] checking for i686-tizen-linux-gnu-c++... no [ 53s] checking for i686-tizen-linux-gnu-gpp... no [ 53s] checking for i686-tizen-linux-gnu-aCC... no [ 53s] checking for i686-tizen-linux-gnu-CC... no [ 53s] checking for i686-tizen-linux-gnu-cxx... no [ 53s] checking for i686-tizen-linux-gnu-cc++... no [ 53s] checking for i686-tizen-linux-gnu-cl.exe... no [ 53s] checking for i686-tizen-linux-gnu-FCC... no [ 53s] checking for i686-tizen-linux-gnu-KCC... no [ 53s] checking for i686-tizen-linux-gnu-RCC... no [ 53s] checking for i686-tizen-linux-gnu-xlC_r... no [ 53s] checking for i686-tizen-linux-gnu-xlC... no [ 53s] checking for g++... g++ [ 53s] checking whether we are using the GNU C++ compiler... yes [ 53s] checking whether g++ accepts -g... yes [ 53s] checking dependency style of g++... gcc3 [ 53s] checking how to run the C++ preprocessor... g++ -E [ 53s] checking for ld used by g++... /usr/i586-tizen-linux/bin/ld [ 53s] checking if the linker (/usr/i586-tizen-linux/bin/ld) is GNU ld... yes [ 53s] checking whether the g++ linker (/usr/i586-tizen-linux/bin/ld) supports shared libraries... yes [ 53s] checking for g++ option to produce PIC... -fPIC -DPIC [ 53s] checking if g++ PIC flag -fPIC -DPIC works... yes [ 53s] checking if g++ static flag -static works... no [ 53s] checking if g++ supports -c -o file.o... yes [ 53s] checking if g++ supports -c -o file.o... (cached) yes [ 53s] checking whether the g++ linker (/usr/i586-tizen-linux/bin/ld) supports shared libraries... yes [ 53s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 53s] checking how to hardcode library paths into programs... immediate [ 53s] checking for library containing strerror... none required [ 53s] checking for gcc option to accept ISO C99... -std=gnu99 [ 53s] checking for gcc -std=gnu99 option to accept ISO Standard C... (cached) -std=gnu99 [ 53s] checking whether we are using the GNU C++ compiler... (cached) yes [ 53s] checking whether g++ accepts -g... (cached) yes [ 53s] checking dependency style of g++... (cached) gcc3 [ 53s] checking for i686-tizen-linux-gnu-pkg-config... /bin/i686-tizen-linux-gnu-pkg-config [ 53s] checking pkg-config is at least version 0.9.0... yes [ 53s] checking for the pthreads library -lpthreads... no [ 53s] checking whether pthreads work without any flags... no [ 53s] checking whether pthreads work with -Kthread... no [ 53s] checking whether pthreads work with -kthread... no [ 53s] checking for the pthreads library -llthread... no [ 53s] checking for the pthreads library -lpthread... yes [ 53s] checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE [ 53s] checking if more special flags are required for pthreads... no [ 53s] checking for PTHREAD_PRIO_INHERIT... yes [ 53s] checking for X... disabled [ 53s] checking for dirent.h that defines DIR... yes [ 54s] checking for library containing opendir... none required [ 54s] checking for stdint.h... (cached) yes [ 54s] checking whether gettimeofday is declared... yes [ 54s] checking for gettimeofday... yes [ 54s] checking for localtime_r... yes [ 54s] checking for gmtime_r... yes [ 54s] checking for rand_r... yes [ 54s] checking for gethostbyname... yes [ 54s] checking for nanosleep... yes [ 54s] ./configure: line 19834: test: x: unary operator expected [ 54s] checking for TIFFOpen in -ltiff... yes [ 54s] checking tiffio.h usability... yes [ 54s] checking tiffio.h presence... yes [ 54s] checking for tiffio.h... yes [ 54s] checking for popen... yes [ 54s] checking for mkstemp... yes [ 54s] checking for mkstemps... yes [ 54s] checking for strcpy_s... no [ 54s] checking for strcat_s... no [ 54s] checking for special C compiler options needed for large files... no [ 54s] checking for _FILE_OFFSET_BITS value needed for large files... 64 [ 54s] checking for _LARGEFILE_SOURCE value needed for large files... no [ 54s] checking for fseek64... no [ 54s] checking for ftell64... no [ 55s] checking for pread64... yes [ 55s] checking for lseek64... yes [ 55s] checking for inflate in -lz... yes [ 55s] checking zlib.h usability... yes [ 55s] checking zlib.h presence... yes [ 55s] checking for zlib.h... yes [ 55s] checking for libjpeg6b... no [ 55s] checking for libjpeg... -ljpeg [ 55s] checking jpeglib.h usability... yes [ 55s] checking jpeglib.h presence... yes [ 55s] checking for jpeglib.h... yes [ 55s] checking libjpeg.h works correctly... ok [ 55s] checking for LIBPNG... yes [ 55s] checking for FREETYPE... yes [ 55s] checking which font configuration to use... fontconfig [ 55s] checking for FONTCONFIG... yes [ 55s] checking for CAIRO... yes [ 55s] checking for PDFTOCAIRO... yes [ 55s] checking fcntl.h usability... yes [ 55s] checking fcntl.h presence... yes [ 55s] checking for fcntl.h... yes [ 55s] checking sys/mman.h usability... yes [ 55s] checking sys/mman.h presence... yes [ 55s] checking for sys/mman.h... yes [ 55s] checking for sys/stat.h... (cached) yes [ 55s] checking for POPPLER_GLIB... yes [ 55s] checking for gobject-introspection... no [ 55s] checking for glib-mkenums... /bin/glib-mkenums [ 55s] checking for gtk-doc... no [ 55s] configure: WARNING: [ 55s] You will not be able to create source packages with 'make dist' [ 55s] because gtk-doc >= 1.14 is not found. [ 55s] checking for gtkdoc-check... no [ 55s] checking for gtkdoc-check... no [ 55s] checking for gtkdoc-rebase... no [ 55s] checking for gtkdoc-mkpdf... no [ 55s] checking whether to build gtk-doc documentation... no [ 55s] checking for GTKDOC_DEPS... yes [ 55s] checking for iconv... yes [ 55s] checking for working iconv... yes [ 55s] checking for iconv declaration... [ 55s] extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); [ 55s] checking for LCMS... yes [ 55s] checking for test data in /home/abuild/rpmbuild/BUILD/poppler-0.26.5/./../test... no [ 55s] configure: WARNING: [ 55s] No test data found in /home/abuild/rpmbuild/BUILD/poppler-0.26.5/./../test. [ 55s] You will not be able to run 'make check' successfully. [ 55s] [ 55s] The test data is not included in the source packages [ 55s] and is also not part of the main git repository. Instead, [ 55s] you can checkout the test data from its own git [ 55s] repository with: [ 55s] [ 55s] git clone git://git.freedesktop.org/git/poppler/test [ 55s] [ 55s] You should checkout the test data as a sibling of your [ 55s] poppler source folder or specify the location of your [ 55s] checkout with --with-testdatadir=/path/to/checkoutdir/test. [ 55s] [ 55s] checking that generated files are newer than configure... done [ 55s] configure: creating ./config.status [ 56s] config.status: creating Makefile [ 56s] config.status: creating goo/Makefile [ 56s] config.status: creating fofi/Makefile [ 56s] config.status: creating splash/Makefile [ 56s] config.status: creating poppler/Makefile [ 56s] config.status: creating utils/Makefile [ 56s] config.status: creating glib/Makefile [ 56s] config.status: creating glib/poppler-features.h [ 56s] config.status: creating glib/reference/Makefile [ 56s] config.status: creating glib/reference/version.xml [ 56s] config.status: creating glib/demo/Makefile [ 56s] config.status: creating test/Makefile [ 56s] config.status: creating qt4/Makefile [ 56s] config.status: creating qt4/src/Makefile [ 56s] config.status: creating qt4/tests/Makefile [ 56s] config.status: creating qt4/demos/Makefile [ 56s] config.status: creating qt5/Makefile [ 56s] config.status: creating qt5/src/Makefile [ 56s] config.status: creating qt5/tests/Makefile [ 56s] config.status: creating qt5/demos/Makefile [ 56s] config.status: creating cpp/Makefile [ 56s] config.status: creating cpp/poppler-version.h [ 56s] config.status: creating cpp/tests/Makefile [ 56s] config.status: creating poppler.pc [ 56s] config.status: creating poppler-uninstalled.pc [ 56s] config.status: creating poppler-cairo.pc [ 56s] config.status: creating poppler-cairo-uninstalled.pc [ 56s] config.status: creating poppler-splash.pc [ 56s] config.status: creating poppler-splash-uninstalled.pc [ 56s] config.status: creating poppler-glib.pc [ 56s] config.status: creating poppler-glib-uninstalled.pc [ 56s] config.status: creating poppler-qt4.pc [ 56s] config.status: creating poppler-qt4-uninstalled.pc [ 56s] config.status: creating poppler-qt5.pc [ 56s] config.status: creating poppler-qt5-uninstalled.pc [ 56s] config.status: creating poppler-cpp.pc [ 56s] config.status: creating poppler-cpp-uninstalled.pc [ 56s] config.status: creating config.h [ 56s] config.status: creating poppler/poppler-config.h [ 56s] config.status: executing depfiles commands [ 57s] config.status: executing libtool commands [ 57s] [ 57s] Building poppler with support for: [ 57s] font configuration: fontconfig [ 57s] splash output: yes [ 57s] cairo output: yes [ 57s] qt4 wrapper: no [ 57s] qt5 wrapper: no [ 57s] glib wrapper: yes [ 57s] introspection: no [ 57s] cpp wrapper: yes [ 57s] use gtk-doc: no [ 57s] use libjpeg: yes [ 57s] use libpng: yes [ 57s] use libtiff: yes [ 57s] use zlib: yes [ 57s] use libcurl: no [ 57s] use libopenjpeg: no [ 57s] use cms: yes [ 57s] with lcms2 [ 57s] command line utils: yes [ 57s] test data dir: /home/abuild/rpmbuild/BUILD/poppler-0.26.5/./../test [ 57s] [ 57s] Warning: Using zlib is not totally safe [ 57s] Warning: Using libopenjpeg is recommended [ 57s] + /bin/make -j4 [ 57s] /bin/make all-recursive [ 57s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5' [ 57s] Making all in goo [ 57s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/goo' [ 57s] CXX gmempp.lo [ 57s] CXX gfile.lo [ 57s] CXX GooHash.lo [ 57s] CXX GooList.lo [ 57s] CXX GooTimer.lo [ 57s] CXX GooString.lo [ 57s] CXX gmem.lo [ 57s] CXX FixedPoint.lo [ 57s] CXX NetPBMWriter.lo [ 57s] CXX PNGWriter.lo [ 57s] CXX JpegWriter.lo [ 57s] CXX TiffWriter.lo [ 57s] CXX ImgWriter.lo [ 57s] CXX gstrtod.lo [ 57s] CXX grandom.lo [ 57s] CXXLD libgoo.la [ 57s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/goo' [ 57s] Making all in fofi [ 57s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/fofi' [ 57s] CXX FoFiEncodings.lo [ 57s] CXX FoFiTrueType.lo [ 57s] CXX FoFiType1.lo [ 57s] CXX FoFiBase.lo [ 58s] CXX FoFiType1C.lo [ 58s] CXX FoFiIdentifier.lo [ 59s] CXXLD libfofi.la [ 59s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/fofi' [ 59s] Making all in splash [ 59s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/splash' [ 59s] CXX Splash.lo [ 59s] CXX SplashBitmap.lo [ 59s] CXX SplashClip.lo [ 59s] CXX SplashFTFont.lo [ 59s] CXX SplashFTFontEngine.lo [ 59s] CXX SplashFTFontFile.lo [ 59s] CXX SplashFont.lo [ 59s] CXX SplashFontEngine.lo [ 59s] CXX SplashFontFile.lo [ 59s] CXX SplashFontFileID.lo [ 59s] CXX SplashPath.lo [ 60s] CXX SplashPattern.lo [ 60s] CXX SplashScreen.lo [ 60s] CXX SplashState.lo [ 60s] CXX SplashT1Font.lo [ 60s] CXX SplashT1FontEngine.lo [ 60s] CXX SplashT1FontFile.lo [ 60s] CXX SplashXPath.lo [ 60s] CXX SplashXPathScanner.lo [ 62s] CXXLD libsplash.la [ 62s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/splash' [ 62s] Making all in poppler [ 62s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/poppler' [ 62s] /bin/make all-am [ 62s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/poppler' [ 62s] CXX SplashOutputDev.lo [ 62s] CXX FlateStream.lo [ 62s] CXX JPXStream.lo [ 62s] CXX DCTStream.lo [ 63s] CXX Annot.lo [ 63s] CXX Array.lo [ 63s] CXX BuiltinFont.lo [ 63s] CXX BuiltinFontTables.lo [ 63s] CXX CachedFile.lo [ 64s] CXX Catalog.lo [ 64s] CXX CharCodeToUnicode.lo [ 65s] CXX CMap.lo [ 65s] CXX DateInfo.lo [ 65s] CXX Decrypt.lo [ 65s] CXX Dict.lo [ 65s] CXX Error.lo [ 65s] CXX FileSpec.lo [ 65s] CXX FontEncodingTables.lo [ 65s] CXX Form.lo [ 65s] CXX FontInfo.lo [ 66s] CXX Function.lo [ 66s] CXX Gfx.lo [ 67s] CXX GfxFont.lo [ 67s] CXX GfxState.lo [ 67s] CXX GlobalParams.lo [ 68s] CXX Hints.lo [ 68s] CXX JArithmeticDecoder.lo [ 68s] CXX JBIG2Stream.lo [ 68s] CXX Lexer.lo [ 69s] CXX Linearization.lo [ 69s] CXX Link.lo [ 69s] CXX LocalPDFDocBuilder.lo [ 69s] CXX Movie.lo [ 70s] CXX NameToCharCode.lo [ 70s] CXX Object.lo [ 70s] CXX OptionalContent.lo [ 70s] CXX Outline.lo [ 70s] CXX OutputDev.lo [ 70s] CXX Page.lo [ 70s] CXX PageTransition.lo [ 71s] CXX Parser.lo [ 71s] CXX PDFDoc.lo [ 71s] CXX PDFDocEncoding.lo [ 71s] CXX PDFDocFactory.lo [ 71s] CXX PopplerCache.lo [ 71s] PDFDoc.cc: In member function 'GBool PDFDoc::markAnnotations(Object*, XRef*, XRef*, Guint, Guint, Guint)': [ 71s] PDFDoc.cc:1607:37: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] [ 71s] if (obj2.getRef().num == oldPageNum) { [ 71s] ^ [ 71s] PDFDoc.cc:1617:44: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] [ 71s] } else if (obj2.getRef().num == newPageNum) { [ 71s] ^ [ 71s] CXX ProfileData.lo [ 71s] CXX PreScanOutputDev.lo [ 71s] CXX PSTokenizer.lo [ 71s] CXX Rendition.lo [ 71s] CXX StdinCachedFile.lo [ 71s] CXX StdinPDFDocBuilder.lo [ 71s] CXX Stream.lo [ 71s] CXX StructTreeRoot.lo [ 71s] CXX StructElement.lo [ 72s] CXX strtok_r.lo [ 72s] CXX UnicodeMap.lo [ 72s] CXX UnicodeTypeTable.lo [ 72s] CXX UTF.lo [ 72s] CXX ViewerPreferences.lo [ 72s] CXX XRef.lo [ 72s] CXX PSOutputDev.lo [ 72s] CXX TextOutputDev.lo [ 73s] CXX MarkedContentOutputDev.lo [ 73s] CXX PageLabelInfo.lo [ 73s] CXX SecurityHandler.lo [ 74s] CXX Sound.lo [ 74s] CXX XpdfPluginAPI.lo [ 74s] CXX CairoFontEngine.lo [ 74s] CXX CairoOutputDev.lo [ 74s] CXX CairoRescaleBox.lo [ 75s] CXXLD libpoppler-cairo.la [ 76s] CXXLD libpoppler.la [ 76s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/poppler' [ 76s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/poppler' [ 76s] Making all in utils [ 76s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/utils' [ 76s] CXX pdfdetach.o [ 76s] CXX parseargs.o [ 76s] CXX pdffonts.o [ 76s] CXX pdfimages.o [ 77s] CXX ImageOutputDev.o [ 77s] CXX JSInfo.o [ 77s] CXX pdfinfo.o [ 77s] CXX printencodings.o [ 77s] CXX pdftops.o [ 77s] CXX pdftotext.o [ 77s] CXX pdftohtml-pdftohtml.o [ 77s] CXX pdftohtml-HtmlFonts.o [ 77s] CXX pdftohtml-HtmlLinks.o [ 77s] CXX pdftohtml-HtmlOutputDev.o [ 77s] CXX pdftohtml-parseargs.o [ 77s] CXX pdfseparate.o [ 77s] CXX pdfunite.o [ 78s] CXX pdftoppm.o [ 78s] CXX pdftocairo.o [ 78s] CXXLD pdfdetach [ 78s] CXXLD pdffonts [ 78s] CXXLD pdfimages [ 78s] CXXLD pdfinfo [ 78s] CXXLD pdftops [ 78s] CXXLD pdftotext [ 78s] CXXLD pdfseparate [ 78s] CXXLD pdfunite [ 78s] CXXLD pdftoppm [ 78s] CXXLD pdftocairo [ 78s] CXXLD pdftohtml [ 79s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/utils' [ 79s] Making all in glib [ 79s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/glib' [ 79s] GEN stamp-poppler-enums.h [ 79s] /bin/make all-recursive [ 79s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/glib' [ 79s] Making all in . [ 79s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/glib' [ 79s] CC poppler-enums.lo [ 79s] CXX poppler-action.lo [ 79s] CXX poppler-document.lo [ 79s] CXX poppler-date.lo [ 79s] CXX poppler-page.lo [ 79s] CXX poppler-attachment.lo [ 79s] CXX poppler-form-field.lo [ 80s] CXX poppler-annot.lo [ 80s] CXX poppler-layer.lo [ 80s] CXX poppler-media.lo [ 80s] CXX poppler-movie.lo [ 80s] CXX poppler-cached-file-loader.lo [ 81s] CXX poppler-input-stream.lo [ 81s] CXX poppler-structure-element.lo [ 81s] CXX poppler.lo [ 82s] CXXLD libpoppler-glib.la [ 82s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/glib' [ 82s] Making all in reference [ 82s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/glib/reference' [ 82s] make[4]: Nothing to be done for 'all'. [ 82s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/glib/reference' [ 82s] Making all in demo [ 82s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/glib/demo' [ 82s] make[4]: Nothing to be done for 'all'. [ 82s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/glib/demo' [ 82s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/glib' [ 82s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/glib' [ 82s] Making all in test [ 82s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/test' [ 82s] CXX perf-test.o [ 82s] CXX perf-test-preview-dummy.o [ 82s] CXX pdf-fullrewrite.o [ 82s] CXX parseargs.o [ 82s] CXXLD pdf-fullrewrite [ 83s] CXXLD perf-test [ 83s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/test' [ 83s] Making all in cpp [ 83s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/cpp' [ 83s] Making all in . [ 83s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/cpp' [ 83s] CXX libpoppler_cpp_la-poppler-document.lo [ 83s] CXX libpoppler_cpp_la-poppler-embedded-file.lo [ 83s] CXX libpoppler_cpp_la-poppler-font.lo [ 83s] CXX libpoppler_cpp_la-poppler-global.lo [ 83s] CXX libpoppler_cpp_la-poppler-image.lo [ 83s] CXX libpoppler_cpp_la-poppler-page.lo [ 83s] CXX libpoppler_cpp_la-poppler-page-renderer.lo [ 84s] CXX libpoppler_cpp_la-poppler-page-transition.lo [ 84s] CXX libpoppler_cpp_la-poppler-private.lo [ 84s] CXX libpoppler_cpp_la-poppler-rectangle.lo [ 84s] CXX libpoppler_cpp_la-poppler-toc.lo [ 84s] CXX libpoppler_cpp_la-poppler-version.lo [ 84s] CXXLD libpoppler-cpp.la [ 84s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/cpp' [ 84s] Making all in tests [ 84s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/cpp/tests' [ 84s] CXX poppler-dump.o [ 84s] CXX parseargs.o [ 84s] CXX poppler-render.o [ 85s] CXXLD poppler-render [ 85s] CXXLD poppler-dump [ 85s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/cpp/tests' [ 85s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/cpp' [ 85s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5' [ 85s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5' [ 85s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5' [ 85s] + exit 0 [ 85s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.vLBiNk [ 85s] + umask 022 [ 85s] + cd /home/abuild/rpmbuild/BUILD [ 85s] + cd poppler-0.26.5 [ 85s] + LANG=C [ 85s] + export LANG [ 85s] + unset DISPLAY [ 85s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386 [ 85s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386 [ 85s] + /bin/make prefix=/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr exec_prefix=/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr bindir=/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/bin sbindir=/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/sbin sysconfdir=/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/etc datadir=/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/share includedir=/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/include libdir=/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/lib libexecdir=/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/libexec localstatedir=/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/var sharedstatedir=/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/com mandir=/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/share/man infodir=/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/share/info install [ 85s] Making install in goo [ 85s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/goo' [ 85s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/goo' [ 85s] make[2]: Nothing to be done for 'install-exec-am'. [ 85s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/include/poppler/goo' [ 85s] /bin/install -c -m 644 GooHash.h GooList.h GooTimer.h GooMutex.h GooString.h gtypes.h gmem.h gfile.h FixedPoint.h NetPBMWriter.h PNGWriter.h JpegWriter.h TiffWriter.h ImgWriter.h GooLikely.h gstrtod.h grandom.h '/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/include/poppler/goo' [ 85s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/goo' [ 85s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/goo' [ 85s] Making install in fofi [ 85s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/fofi' [ 85s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/fofi' [ 85s] make[2]: Nothing to be done for 'install-exec-am'. [ 85s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/include/poppler/fofi' [ 85s] /bin/install -c -m 644 FoFiBase.h FoFiEncodings.h FoFiTrueType.h FoFiType1.h FoFiIdentifier.h FoFiType1C.h '/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/include/poppler/fofi' [ 85s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/fofi' [ 85s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/fofi' [ 85s] Making install in splash [ 85s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/splash' [ 85s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/splash' [ 85s] make[2]: Nothing to be done for 'install-exec-am'. [ 85s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/include/poppler/splash' [ 85s] /bin/install -c -m 644 Splash.h SplashBitmap.h SplashClip.h SplashErrorCodes.h SplashFTFont.h SplashFTFontEngine.h SplashFTFontFile.h SplashFont.h SplashFontEngine.h SplashFontFile.h SplashFontFileID.h SplashGlyphBitmap.h SplashMath.h SplashPath.h SplashPattern.h SplashScreen.h SplashState.h SplashT1Font.h SplashT1FontEngine.h SplashT1FontFile.h SplashTypes.h SplashXPath.h SplashXPathScanner.h '/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/include/poppler/splash' [ 85s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/splash' [ 85s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/splash' [ 85s] Making install in poppler [ 86s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/poppler' [ 86s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/poppler' [ 86s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/lib' [ 86s] /bin/sh ../libtool --mode=install /bin/install -c libpoppler.la '/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/lib' [ 86s] libtool: install: /bin/install -c .libs/libpoppler.so.46.0.0 /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/lib/libpoppler.so.46.0.0 [ 86s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/lib && { ln -s -f libpoppler.so.46.0.0 libpoppler.so.46 || { rm -f libpoppler.so.46 && ln -s libpoppler.so.46.0.0 libpoppler.so.46; }; }) [ 86s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/lib && { ln -s -f libpoppler.so.46.0.0 libpoppler.so || { rm -f libpoppler.so && ln -s libpoppler.so.46.0.0 libpoppler.so; }; }) [ 86s] libtool: install: /bin/install -c .libs/libpoppler.lai /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/lib/libpoppler.la [ 86s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 86s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/include/poppler' [ 86s] /bin/install -c -m 644 poppler-config.h '/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/include/poppler' [ 86s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/include/poppler' [ 86s] /bin/install -c -m 644 SplashOutputDev.h Annot.h Array.h BuiltinFont.h BuiltinFontTables.h CachedFile.h Catalog.h CharCodeToUnicode.h CMap.h DateInfo.h Decrypt.h Dict.h Error.h FileSpec.h FontEncodingTables.h FontInfo.h Form.h Function.h Gfx.h GfxFont.h GfxState.h GfxState_helpers.h GlobalParams.h Hints.h JArithmeticDecoder.h JBIG2Stream.h Lexer.h Linearization.h Link.h LocalPDFDocBuilder.h Movie.h NameToCharCode.h Object.h OptionalContent.h Outline.h OutputDev.h Page.h PageTransition.h Parser.h PDFDoc.h '/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/include/poppler' [ 86s] /bin/install -c -m 644 PDFDocBuilder.h PDFDocEncoding.h PDFDocFactory.h PopplerCache.h ProfileData.h PreScanOutputDev.h PSTokenizer.h Rendition.h StdinCachedFile.h StdinPDFDocBuilder.h Stream-CCITT.h Stream.h StructElement.h StructTreeRoot.h UnicodeMap.h UnicodeMapTables.h UnicodeTypeTable.h UnicodeCClassTables.h UnicodeCompTables.h UnicodeDecompTables.h ViewerPreferences.h XRef.h CharTypes.h CompactFontTables.h ErrorCodes.h NameToUnicodeTable.h PSOutputDev.h TextOutputDev.h MarkedContentOutputDev.h SecurityHandler.h UTF.h UTF8.h XpdfPluginAPI.h Sound.h '/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/include/poppler' [ 86s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/poppler' [ 86s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/poppler' [ 86s] Making install in utils [ 86s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/utils' [ 86s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/utils' [ 86s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/bin' [ 86s] /bin/sh ../libtool --mode=install /bin/install -c pdfdetach pdffonts pdfimages pdfinfo pdftops pdftotext pdftohtml pdfseparate pdfunite pdftoppm pdftocairo '/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/bin' [ 86s] libtool: install: warning: `../poppler/libpoppler.la' has not been installed in `/usr/lib' [ 86s] libtool: install: /bin/install -c .libs/pdfdetach /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/bin/pdfdetach [ 86s] libtool: install: warning: `../poppler/libpoppler.la' has not been installed in `/usr/lib' [ 86s] libtool: install: /bin/install -c .libs/pdffonts /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/bin/pdffonts [ 86s] libtool: install: warning: `../poppler/libpoppler.la' has not been installed in `/usr/lib' [ 86s] libtool: install: /bin/install -c .libs/pdfimages /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/bin/pdfimages [ 86s] libtool: install: warning: `../poppler/libpoppler.la' has not been installed in `/usr/lib' [ 86s] libtool: install: /bin/install -c .libs/pdfinfo /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/bin/pdfinfo [ 86s] libtool: install: warning: `../poppler/libpoppler.la' has not been installed in `/usr/lib' [ 86s] libtool: install: /bin/install -c .libs/pdftops /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/bin/pdftops [ 86s] libtool: install: warning: `../poppler/libpoppler.la' has not been installed in `/usr/lib' [ 86s] libtool: install: /bin/install -c .libs/pdftotext /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/bin/pdftotext [ 86s] libtool: install: warning: `../poppler/libpoppler.la' has not been installed in `/usr/lib' [ 86s] libtool: install: /bin/install -c .libs/pdftohtml /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/bin/pdftohtml [ 86s] libtool: install: warning: `../poppler/libpoppler.la' has not been installed in `/usr/lib' [ 86s] libtool: install: /bin/install -c .libs/pdfseparate /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/bin/pdfseparate [ 86s] libtool: install: warning: `../poppler/libpoppler.la' has not been installed in `/usr/lib' [ 86s] libtool: install: /bin/install -c .libs/pdfunite /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/bin/pdfunite [ 86s] libtool: install: warning: `../poppler/libpoppler.la' has not been installed in `/usr/lib' [ 86s] libtool: install: /bin/install -c .libs/pdftoppm /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/bin/pdftoppm [ 86s] libtool: install: warning: `../poppler/libpoppler.la' has not been installed in `/usr/lib' [ 86s] libtool: install: /bin/install -c .libs/pdftocairo /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/bin/pdftocairo [ 86s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/share/man/man1' [ 86s] /bin/install -c -m 644 pdfdetach.1 pdffonts.1 pdfimages.1 pdfinfo.1 pdftops.1 pdftotext.1 pdftohtml.1 pdfseparate.1 pdfunite.1 pdftoppm.1 pdftocairo.1 '/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/share/man/man1' [ 86s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/utils' [ 86s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/utils' [ 86s] Making install in glib [ 86s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/glib' [ 86s] /bin/make install-recursive [ 86s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/glib' [ 86s] Making install in . [ 86s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/glib' [ 86s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/glib' [ 86s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/lib' [ 86s] /bin/sh ../libtool --mode=install /bin/install -c libpoppler-glib.la '/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/lib' [ 86s] libtool: install: warning: relinking `libpoppler-glib.la' [ 86s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/poppler-0.26.5/glib; /bin/sh /home/abuild/rpmbuild/BUILD/poppler-0.26.5/libtool --silent --tag CXX --mode=relink g++ -fPIC -Wall -Woverloaded-virtual -Wnon-virtual-dtor -Wcast-align -fno-exceptions -fno-check-new -fno-common -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -version-info 14:0:6 -o libpoppler-glib.la -rpath /usr/lib poppler-enums.lo poppler-action.lo poppler-date.lo poppler-document.lo poppler-page.lo poppler-attachment.lo poppler-form-field.lo poppler-annot.lo poppler-layer.lo poppler-media.lo poppler-movie.lo poppler-cached-file-loader.lo poppler-input-stream.lo poppler-structure-element.lo poppler.lo ../poppler/libpoppler.la ../poppler/libpoppler-cairo.la -lgio-2.0 -lgobject-2.0 -lglib-2.0 -lcairo -lfreetype -lz -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386) [ 86s] libtool: install: /bin/install -c .libs/libpoppler-glib.so.8.6.0T /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/lib/libpoppler-glib.so.8.6.0 [ 86s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/lib && { ln -s -f libpoppler-glib.so.8.6.0 libpoppler-glib.so.8 || { rm -f libpoppler-glib.so.8 && ln -s libpoppler-glib.so.8.6.0 libpoppler-glib.so.8; }; }) [ 86s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/lib && { ln -s -f libpoppler-glib.so.8.6.0 libpoppler-glib.so || { rm -f libpoppler-glib.so && ln -s libpoppler-glib.so.8.6.0 libpoppler-glib.so; }; }) [ 86s] libtool: install: /bin/install -c .libs/libpoppler-glib.lai /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/lib/libpoppler-glib.la [ 86s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 86s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/include/poppler/glib' [ 86s] /bin/install -c -m 644 poppler-features.h '/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/include/poppler/glib' [ 86s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/include/poppler/glib' [ 86s] /bin/install -c -m 644 poppler-action.h poppler-date.h poppler-document.h poppler-page.h poppler-attachment.h poppler-form-field.h poppler-annot.h poppler-layer.h poppler-media.h poppler-movie.h poppler-structure-element.h poppler.h poppler-enums.h '/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/include/poppler/glib' [ 86s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/glib' [ 86s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/glib' [ 86s] Making install in reference [ 86s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/glib/reference' [ 86s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/glib/reference' [ 86s] make[4]: Nothing to be done for 'install-exec-am'. [ 86s] /bin/install -c -m 644 ./html/PopplerAnnot.html [ 86s] /bin/install -c -m 644 ./html/PopplerAttachment.html [ 86s] /bin/install -c -m 644 ./html/PopplerDocument.html [ 86s] /bin/install -c -m 644 ./html/PopplerFormField.html [ 86s] /bin/install -c -m 644 ./html/PopplerLayer.html [ 86s] /bin/install -c -m 644 ./html/PopplerMedia.html [ 86s] /bin/install -c -m 644 ./html/PopplerMovie.html [ 86s] /bin/install -c -m 644 ./html/PopplerPage.html [ 86s] /bin/install -c -m 644 ./html/PopplerStructureElement.html [ 86s] /bin/install -c -m 644 ./html/annotation-glossary.html [ 86s] /bin/install -c -m 644 ./html/api-index-0-12.html [ 86s] /bin/install -c -m 644 ./html/api-index-0-14.html [ 86s] /bin/install -c -m 644 ./html/api-index-0-16.html [ 86s] /bin/install -c -m 644 ./html/api-index-0-18.html [ 86s] /bin/install -c -m 644 ./html/api-index-0-20.html [ 86s] /bin/install -c -m 644 ./html/api-index-0-22.html [ 86s] /bin/install -c -m 644 ./html/api-index-deprecated.html [ 86s] /bin/install -c -m 644 ./html/api-index-full.html [ 86s] /bin/install -c -m 644 ./html/ch01.html [ 86s] /bin/install -c -m 644 ./html/home.png [ 86s] /bin/install -c -m 644 ./html/index.html [ 86s] /bin/install -c -m 644 ./html/index.sgml [ 86s] /bin/install -c -m 644 ./html/left-insensitive.png [ 86s] /bin/install -c -m 644 ./html/left.png [ 86s] /bin/install -c -m 644 ./html/poppler-PopplerAction.html [ 86s] /bin/install -c -m 644 ./html/poppler-Version-and-Features-Information.html [ 86s] /bin/install -c -m 644 ./html/poppler-poppler.html [ 86s] /bin/install -c -m 644 ./html/poppler.devhelp2 [ 86s] /bin/install -c -m 644 ./html/right-insensitive.png [ 86s] /bin/install -c -m 644 ./html/right.png [ 86s] /bin/install -c -m 644 ./html/style.css [ 86s] /bin/install -c -m 644 ./html/up-insensitive.png [ 86s] /bin/install -c -m 644 ./html/up.png [ 86s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/glib/reference' [ 86s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/glib/reference' [ 86s] Making install in demo [ 86s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/glib/demo' [ 86s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/glib/demo' [ 86s] make[4]: Nothing to be done for 'install-data-am'. [ 86s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/glib/demo' [ 86s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/glib/demo' [ 86s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/glib' [ 86s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/glib' [ 86s] Making install in test [ 86s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/test' [ 86s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/test' [ 86s] make[2]: Nothing to be done for 'install-exec-am'. [ 86s] make[2]: Nothing to be done for 'install-data-am'. [ 86s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/test' [ 86s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/test' [ 86s] Making install in cpp [ 86s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/cpp' [ 86s] Making install in . [ 86s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/cpp' [ 86s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/cpp' [ 86s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/lib' [ 86s] /bin/sh ../libtool --mode=install /bin/install -c libpoppler-cpp.la '/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/lib' [ 86s] libtool: install: warning: relinking `libpoppler-cpp.la' [ 86s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/poppler-0.26.5/cpp; /bin/sh /home/abuild/rpmbuild/BUILD/poppler-0.26.5/libtool --silent --tag CXX --mode=relink g++ -Dpoppler_cpp_EXPORTS -fPIC -Wall -Woverloaded-virtual -Wnon-virtual-dtor -Wcast-align -fno-exceptions -fno-check-new -fno-common -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -version-info 2:0:2 -o libpoppler-cpp.la -rpath /usr/lib libpoppler_cpp_la-poppler-document.lo libpoppler_cpp_la-poppler-embedded-file.lo libpoppler_cpp_la-poppler-font.lo libpoppler_cpp_la-poppler-global.lo libpoppler_cpp_la-poppler-image.lo libpoppler_cpp_la-poppler-page.lo libpoppler_cpp_la-poppler-page-renderer.lo libpoppler_cpp_la-poppler-page-transition.lo libpoppler_cpp_la-poppler-private.lo libpoppler_cpp_la-poppler-rectangle.lo libpoppler_cpp_la-poppler-toc.lo libpoppler_cpp_la-poppler-version.lo ../poppler/libpoppler.la -lz -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386) [ 86s] libtool: install: /bin/install -c .libs/libpoppler-cpp.so.0.2.0T /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/lib/libpoppler-cpp.so.0.2.0 [ 86s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/lib && { ln -s -f libpoppler-cpp.so.0.2.0 libpoppler-cpp.so.0 || { rm -f libpoppler-cpp.so.0 && ln -s libpoppler-cpp.so.0.2.0 libpoppler-cpp.so.0; }; }) [ 87s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/lib && { ln -s -f libpoppler-cpp.so.0.2.0 libpoppler-cpp.so || { rm -f libpoppler-cpp.so && ln -s libpoppler-cpp.so.0.2.0 libpoppler-cpp.so; }; }) [ 87s] libtool: install: /bin/install -c .libs/libpoppler-cpp.lai /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/lib/libpoppler-cpp.la [ 87s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 87s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/include/poppler/cpp' [ 87s] /bin/install -c -m 644 poppler-document.h poppler-embedded-file.h poppler-font.h poppler-global.h poppler-image.h poppler-page.h poppler-page-renderer.h poppler-page-transition.h poppler-rectangle.h poppler-toc.h ./poppler-version.h '/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/include/poppler/cpp' [ 87s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/cpp' [ 87s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/cpp' [ 87s] Making install in tests [ 87s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/cpp/tests' [ 87s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/cpp/tests' [ 87s] make[3]: Nothing to be done for 'install-exec-am'. [ 87s] make[3]: Nothing to be done for 'install-data-am'. [ 87s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/cpp/tests' [ 87s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/cpp/tests' [ 87s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5/cpp' [ 87s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5' [ 87s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5' [ 87s] make[2]: Nothing to be done for 'install-exec-am'. [ 87s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/lib/pkgconfig' [ 87s] /bin/install -c -m 644 poppler.pc poppler-cairo.pc poppler-splash.pc poppler-glib.pc poppler-cpp.pc '/home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/lib/pkgconfig' [ 87s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5' [ 87s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/poppler-0.26.5' [ 87s] + /bin/cp -a config.h /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/include/poppler/ [ 87s] + rm /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/lib/libpoppler-cpp.la /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/lib/libpoppler-glib.la /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/lib/libpoppler.la [ 87s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/share/license [ 87s] + cp /home/abuild/rpmbuild/BUILD/poppler-0.26.5/COPYING /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/share/license/libpoppler [ 87s] + cp /home/abuild/rpmbuild/BUILD/poppler-0.26.5/COPYING /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/share/license/libpoppler-glib [ 87s] + cp /home/abuild/rpmbuild/BUILD/poppler-0.26.5/COPYING /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/share/license/poppler-tools [ 87s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/poppler-0.26.5 [ 87s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/bin/pdfdetach [ 87s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/bin/pdffonts [ 87s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/bin/pdfimages [ 87s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/bin/pdfinfo [ 87s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/bin/pdfseparate [ 87s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/bin/pdftocairo [ 87s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/bin/pdftohtml [ 87s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/bin/pdftoppm [ 87s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/bin/pdftops [ 87s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/bin/pdftotext [ 87s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/bin/pdfunite [ 87s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/lib/libpoppler-cpp.so.0.2.0 [ 87s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/lib/libpoppler-glib.so.8.6.0 [ 87s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386/usr/lib/libpoppler.so.46.0.0 [ 87s] cpio: glibc-2.21/csu: Cannot stat: No such file or directory [ 87s] cpio: glibc-2.21/csu/elf-init.c: Cannot stat: No such file or directory [ 87s] cpio: glibc-2.21/csu/init.c: Cannot stat: No such file or directory [ 87s] cpio: glibc-2.21/debug: Cannot stat: No such file or directory [ 87s] cpio: glibc-2.21/debug/stack_chk_fail_local.c: Cannot stat: No such file or directory [ 87s] cpio: glibc-2.21/sysdeps/i386/crti.S: Cannot stat: No such file or directory [ 87s] cpio: glibc-2.21/sysdeps/i386/crtn.S: Cannot stat: No such file or directory [ 87s] cpio: glibc-2.21/sysdeps/i386/start.S: Cannot stat: No such file or directory [ 87s] 9927 blocks [ 87s] + /usr/lib/rpm/brp-compress [ 87s] + /usr/lib/rpm/brp-tizen [ 87s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386 [ 87s] Processing files: poppler-debugsource-0.26.5-7.3.i686 [ 87s] Provides: poppler-debugsource = 0.26.5-7.3 poppler-debugsource(x86-32) = 0.26.5-7.3 [ 87s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 87s] Processing files: poppler-tools-0.26.5-7.3.i686 [ 87s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl [ 87s] cXVlc3Q+CjwvbWFuaWZlc3Q+Cgo= [ 87s] [ 87s] Provides: pdftohtml poppler-tools = 0.26.5 poppler-tools = 0.26.5-7.3 poppler-tools(x86-32) = 0.26.5-7.3 xpdf-tools [ 87s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 87s] Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.0) libm.so.6 libm.so.6(GLIBC_2.0) libpoppler.so.46 libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(GLIBCXX_3.4) libz.so.1 [ 87s] Obsoletes: xpdf-tools < 3.02-10mdv pdftohtml [ 87s] Processing files: libpoppler-0.26.5-7.3.i686 [ 87s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl [ 87s] cXVlc3Q+CjwvbWFuaWZlc3Q+Cgo= [ 87s] [ 87s] Provides: libpoppler = 0.26.5-7.3 libpoppler(x86-32) = 0.26.5-7.3 libpoppler.so.46 poppler = 0.26.5 [ 87s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 87s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 87s] Requires(post): /sbin/ldconfig [ 87s] Requires(postun): /sbin/ldconfig [ 87s] Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.11) libc.so.6(GLIBC_2.2) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libfontconfig.so.1 libfreetype.so.6 libgcc_s.so.1 libgcc_s.so.1(GCC_3.0) libgcc_s.so.1(GLIBC_2.0) libjpeg.so.8 libjpeg.so.8(LIBJPEG_8.0) liblcms2.so.2 libm.so.6 libm.so.6(GLIBC_2.0) libm.so.6(GLIBC_2.1) libpng16.so.16 libpng16.so.16(PNG16_0) libpthread.so.0 libpthread.so.0(GLIBC_2.0) libpthread.so.0(GLIBC_2.1) libpthread.so.0(GLIBC_2.2) libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(GLIBCXX_3.4) libtiff.so.5 libz.so.1 [ 87s] Conflicts: libpoppler12 [ 87s] Processing files: libpoppler-devel-0.26.5-7.3.i686 [ 88s] Provides: libpoppler-devel = 0.26.5-7.3 libpoppler-devel(x86-32) = 0.26.5-7.3 pkgconfig(poppler) = 0.26.5 pkgconfig(poppler-cairo) = 0.26.5 pkgconfig(poppler-splash) = 0.26.5 poppler-devel = 0.26.5-7.3 [ 88s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 88s] Requires: /usr/bin/pkg-config pkgconfig(cairo) >= 1.10.0 pkgconfig(poppler) = 0.26.5 [ 88s] Obsoletes: libpoppler-devel [ 88s] Processing files: libpoppler-glib-0.26.5-7.3.i686 [ 88s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl [ 88s] cXVlc3Q+CjwvbWFuaWZlc3Q+Cgo= [ 88s] [ 88s] Provides: libpoppler-glib = 0.26.5-7.3 libpoppler-glib(x86-32) = 0.26.5-7.3 libpoppler-glib.so.8 poppler-glib = 0.26.5 [ 88s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 88s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 88s] Requires(post): /sbin/ldconfig [ 88s] Requires(postun): /sbin/ldconfig [ 88s] Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.2) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libcairo.so.2 libfreetype.so.6 libgcc_s.so.1 libgcc_s.so.1(GCC_3.0) libgcc_s.so.1(GLIBC_2.0) libgio-2.0.so.0 libglib-2.0.so.0 libgobject-2.0.so.0 libm.so.6 libm.so.6(GLIBC_2.0) libpoppler.so.46 libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(GLIBCXX_3.4) libstdc++.so.6(GLIBCXX_3.4.20) libz.so.1 [ 88s] Conflicts: libpoppler < 0.26.5-7.3 [ 88s] Processing files: libpoppler-glib-devel-0.26.5-7.3.i686 [ 88s] Provides: libpoppler-glib-devel = 0.26.5-7.3 libpoppler-glib-devel(x86-32) = 0.26.5-7.3 pkgconfig(poppler-glib) = 0.26.5 poppler-glib-devel = 0.26.5-7.3 [ 88s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 88s] Requires: /usr/bin/pkg-config pkgconfig(cairo) >= 1.10.0 pkgconfig(gio-2.0) >= 2.18 pkgconfig(glib-2.0) >= 2.18 pkgconfig(gobject-2.0) >= 2.18 pkgconfig(poppler) = 0.26.5 [ 88s] Conflicts: libpoppler-devel < 0.26.5-7.3 [ 88s] Obsoletes: libpoppler-glib-devel [ 88s] Processing files: poppler-tools-debuginfo-0.26.5-7.3.i686 [ 88s] warning: File listed twice: /usr/lib/debug/.build-id [ 88s] warning: File listed twice: /usr/lib/debug/.build-id [ 88s] warning: File listed twice: /usr/lib/debug/.build-id [ 88s] warning: File listed twice: /usr/lib/debug/.build-id [ 88s] Provides: debuginfo(build-id) = 00683338dcd69bc61c0fb1ae00d1fc2bbe5dada0 debuginfo(build-id) = 54fd920cb4d94986d13d6b73c29148ce7210d6a2 debuginfo(build-id) = 6e6726e33446afa058a85123e746da4532c2ddff debuginfo(build-id) = 89fc3c4caa163e611e0715f72c404ac8e2617d67 debuginfo(build-id) = bf4596c00a9a326aa05ec950a54acd634beb011a [ 88s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 88s] Processing files: libpoppler-debuginfo-0.26.5-7.3.i686 [ 88s] Provides: debuginfo(build-id) = 9a0ede1d605daf3bf858375281bdc6b6e1f8d595 [ 88s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 88s] Processing files: libpoppler-glib-debuginfo-0.26.5-7.3.i686 [ 88s] Provides: debuginfo(build-id) = 1fdcaaa9c879fe5e363432bd3c0bdb1651ceaeda [ 88s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 88s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386 [ 88s] warning: Installed (but unpackaged) file(s) found: [ 88s] /usr/include/poppler/cpp/poppler-document.h [ 88s] /usr/include/poppler/cpp/poppler-embedded-file.h [ 88s] /usr/include/poppler/cpp/poppler-font.h [ 88s] /usr/include/poppler/cpp/poppler-global.h [ 88s] /usr/include/poppler/cpp/poppler-image.h [ 88s] /usr/include/poppler/cpp/poppler-page-renderer.h [ 88s] /usr/include/poppler/cpp/poppler-page-transition.h [ 88s] /usr/include/poppler/cpp/poppler-page.h [ 88s] /usr/include/poppler/cpp/poppler-rectangle.h [ 88s] /usr/include/poppler/cpp/poppler-toc.h [ 88s] /usr/include/poppler/cpp/poppler-version.h [ 88s] /usr/lib/debug/.build-id/33/a9321e52f3f860440938315dd44bf180b63fd1 [ 88s] /usr/lib/debug/.build-id/33/a9321e52f3f860440938315dd44bf180b63fd1.debug [ 88s] /usr/lib/debug/.build-id/42/962edfd164486ff70db7a65658cb8eb18ed493 [ 88s] /usr/lib/debug/.build-id/42/962edfd164486ff70db7a65658cb8eb18ed493.debug [ 88s] /usr/lib/debug/.build-id/43/deca8fc357798f736650a7371bb9fd9aae1bbb [ 88s] /usr/lib/debug/.build-id/43/deca8fc357798f736650a7371bb9fd9aae1bbb.debug [ 88s] /usr/lib/debug/.build-id/92/16cee47dd6efe01b514f9b7e328d7fec5c16d5 [ 88s] /usr/lib/debug/.build-id/92/16cee47dd6efe01b514f9b7e328d7fec5c16d5.debug [ 88s] /usr/lib/debug/.build-id/ae/61555feee9d3c14c16e70c9f3b4c0e30c6ac05 [ 88s] /usr/lib/debug/.build-id/ae/61555feee9d3c14c16e70c9f3b4c0e30c6ac05.debug [ 88s] /usr/lib/debug/.build-id/dc/41aa136c4086202ed1682c4ce1bc0b6b1c4cb1 [ 88s] /usr/lib/debug/.build-id/dc/41aa136c4086202ed1682c4ce1bc0b6b1c4cb1.debug [ 88s] /usr/lib/debug/.build-id/df/e4f059f38c7890ffdb4fc41780300860f829d9 [ 88s] /usr/lib/debug/.build-id/df/e4f059f38c7890ffdb4fc41780300860f829d9.debug [ 88s] /usr/lib/debug/usr/bin/pdfdetach.debug [ 88s] /usr/lib/debug/usr/bin/pdffonts.debug [ 88s] /usr/lib/debug/usr/bin/pdfimages.debug [ 88s] /usr/lib/debug/usr/bin/pdftocairo.debug [ 88s] /usr/lib/debug/usr/bin/pdftohtml.debug [ 88s] /usr/lib/debug/usr/bin/pdftotext.debug [ 88s] /usr/lib/debug/usr/lib/libpoppler-cpp.so.0.2.0.debug [ 88s] /usr/lib/libpoppler-cpp.so [ 88s] /usr/lib/libpoppler-cpp.so.0 [ 88s] /usr/lib/libpoppler-cpp.so.0.2.0 [ 88s] /usr/lib/pkgconfig/poppler-cpp.pc [ 88s] Wrote: /home/abuild/rpmbuild/SRPMS/poppler-0.26.5-7.3.src.rpm [ 90s] Wrote: /home/abuild/rpmbuild/RPMS/i686/poppler-debugsource-0.26.5-7.3.i686.rpm [ 90s] Wrote: /home/abuild/rpmbuild/RPMS/i686/poppler-tools-0.26.5-7.3.i686.rpm [ 91s] Wrote: /home/abuild/rpmbuild/RPMS/i686/libpoppler-0.26.5-7.3.i686.rpm [ 91s] Wrote: /home/abuild/rpmbuild/RPMS/i686/libpoppler-devel-0.26.5-7.3.i686.rpm [ 91s] Wrote: /home/abuild/rpmbuild/RPMS/i686/libpoppler-glib-0.26.5-7.3.i686.rpm [ 91s] Wrote: /home/abuild/rpmbuild/RPMS/i686/libpoppler-glib-devel-0.26.5-7.3.i686.rpm [ 91s] Wrote: /home/abuild/rpmbuild/RPMS/i686/poppler-tools-debuginfo-0.26.5-7.3.i686.rpm [ 93s] Wrote: /home/abuild/rpmbuild/RPMS/i686/libpoppler-debuginfo-0.26.5-7.3.i686.rpm [ 94s] Wrote: /home/abuild/rpmbuild/RPMS/i686/libpoppler-glib-debuginfo-0.26.5-7.3.i686.rpm [ 94s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.bJbMvq [ 94s] + umask 022 [ 94s] + cd /home/abuild/rpmbuild/BUILD [ 94s] + cd poppler-0.26.5 [ 94s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/poppler-0.26.5-7.3.i386 [ 94s] + exit 0 [ 94s] ... checking for files with abuild user/group [ 94s] [ 94s] RPMLINT report: [ 94s] =============== [ 97s] poppler-tools.i686: W: useless-provides poppler-tools [ 97s] This package provides 2 times the same capacity. It should only provide it [ 97s] once. [ 97s] [ 97s] libpoppler-glib-devel.i686: W: self-obsoletion libpoppler-glib-devel obsoletes libpoppler-glib-devel = 0.26.5-7.3 [ 97s] poppler-tools.i686: W: self-obsoletion pdftohtml obsoletes pdftohtml [ 97s] poppler-tools.i686: W: self-obsoletion xpdf-tools < 3.02-10mdv obsoletes xpdf-tools [ 97s] libpoppler-devel.i686: W: self-obsoletion libpoppler-devel obsoletes libpoppler-devel = 0.26.5-7.3 [ 97s] The package obsoletes itself. This is known to cause errors in various tools [ 97s] and should thus be avoided, usually by using appropriately versioned Obsoletes [ 97s] and/or Provides and avoiding unversioned ones. [ 97s] [ 97s] libpoppler-glib.i686: E: non-standard-group (Badness: 200) Graphics & UI Framework/Imaging [ 97s] libpoppler.i686: E: non-standard-group (Badness: 200) Graphics & UI Framework/Imaging [ 97s] poppler-tools.i686: E: non-standard-group (Badness: 200) Graphics & UI Framework/Imaging [ 97s] poppler.src: E: non-standard-group (Badness: 200) Graphics & UI Framework/Imaging [ 97s] The value of the Group tag in the package is not valid. Valid groups are [ 97s] listed here: https://wiki.tizen.org/wiki/Packaging/Guidelines#Group_Tag [ 97s] [ 97s] 6 packages and 0 specfiles checked; 4 errors, 5 warnings. [ 97s] [ 97s] ... creating baselibs [ 97s] ... comparing built packages with the former built [ 97s] /usr/lib/build/pkg-diff.sh [ 97s] compare /.build.oldpackages/poppler-0.26.5-7.2.src.rpm /home/abuild/rpmbuild/SRPMS/poppler-0.26.5-7.3.src.rpm [ 97s] comparing rpmtags [ 97s] comparing RELEASE [ 97s] comparing PROVIDES [ 97s] comparing scripts [ 97s] comparing filelist [ 97s] comparing file checksum [ 97s] RPM meta information is identical [ 97s] compare /.build.oldpackages/libpoppler-0.26.5-7.2.i686.rpm /home/abuild/rpmbuild/RPMS/i686/libpoppler-0.26.5-7.3.i686.rpm [ 97s] Comparing libpoppler-0.26.5-7.2.i686.rpm to libpoppler-0.26.5-7.3.i686.rpm [ 97s] comparing rpmtags [ 97s] comparing RELEASE [ 98s] comparing PROVIDES [ 98s] comparing scripts [ 98s] comparing filelist [ 98s] comparing file checksum [ 98s] creating rename script [ 98s] RPM file checksum differs. [ 98s] Extracting packages [ 105s] /usr/lib/libpoppler.so.46.0.0 differs in ELF section .comment [ 105s] --- /tmp/tmp.g3oNQ33Fjz/tmp.l9dd96ZYQi 2015-06-23 13:25:27.211320993 +0000 [ 105s] +++ /tmp/tmp.g3oNQ33Fjz/tmp.3iEmoBsKpQ 2015-06-23 13:25:27.215320994 +0000 [ 105s] @@ -3,4 +3,4 @@ [ 105s] [ 105s] Contents of section .comment: [ 105s] 0000 4743433a 20285469 7a656e29 20342e39 GCC: (Tizen) 4.9 [ 105s] - 0010 00 . [ 105s] + 0010 2e3200 .2. [ 105s] compare /.build.oldpackages/libpoppler-debuginfo-0.26.5-7.2.i686.rpm /home/abuild/rpmbuild/RPMS/i686/libpoppler-debuginfo-0.26.5-7.3.i686.rpm [ 105s] skipping -debuginfo package [ 105s] compare /.build.oldpackages/libpoppler-devel-0.26.5-7.2.i686.rpm /home/abuild/rpmbuild/RPMS/i686/libpoppler-devel-0.26.5-7.3.i686.rpm [ 105s] Comparing libpoppler-devel-0.26.5-7.2.i686.rpm to libpoppler-devel-0.26.5-7.3.i686.rpm [ 105s] comparing rpmtags [ 105s] comparing RELEASE [ 105s] comparing PROVIDES [ 105s] comparing scripts [ 105s] comparing filelist [ 105s] comparing file checksum [ 105s] creating rename script [ 105s] RPM meta information is identical [ 105s] compare /.build.oldpackages/libpoppler-glib-0.26.5-7.2.i686.rpm /home/abuild/rpmbuild/RPMS/i686/libpoppler-glib-0.26.5-7.3.i686.rpm [ 105s] Comparing libpoppler-glib-0.26.5-7.2.i686.rpm to libpoppler-glib-0.26.5-7.3.i686.rpm [ 105s] comparing rpmtags [ 105s] comparing RELEASE [ 105s] comparing PROVIDES [ 105s] comparing scripts [ 106s] comparing filelist [ 106s] comparing file checksum [ 106s] creating rename script [ 106s] RPM file checksum differs. [ 106s] Extracting packages [ 107s] /usr/lib/libpoppler-glib.so.8.6.0 differs in ELF section .comment [ 107s] --- /tmp/tmp.ys9EjoS5H6/tmp.qSzGdJoZup 2015-06-23 13:25:29.251321058 +0000 [ 107s] +++ /tmp/tmp.ys9EjoS5H6/tmp.QM90uY8vaX 2015-06-23 13:25:29.255321058 +0000 [ 107s] @@ -3,4 +3,4 @@ [ 107s] [ 107s] Contents of section .comment: [ 107s] 0000 4743433a 20285469 7a656e29 20342e39 GCC: (Tizen) 4.9 [ 107s] - 0010 00 . [ 107s] + 0010 2e3200 .2. [ 107s] compare /.build.oldpackages/libpoppler-glib-debuginfo-0.26.5-7.2.i686.rpm /home/abuild/rpmbuild/RPMS/i686/libpoppler-glib-debuginfo-0.26.5-7.3.i686.rpm [ 107s] skipping -debuginfo package [ 107s] compare /.build.oldpackages/libpoppler-glib-devel-0.26.5-7.2.i686.rpm /home/abuild/rpmbuild/RPMS/i686/libpoppler-glib-devel-0.26.5-7.3.i686.rpm [ 107s] Comparing libpoppler-glib-devel-0.26.5-7.2.i686.rpm to libpoppler-glib-devel-0.26.5-7.3.i686.rpm [ 107s] comparing rpmtags [ 107s] comparing RELEASE [ 107s] comparing PROVIDES [ 107s] comparing scripts [ 107s] comparing filelist [ 107s] comparing file checksum [ 107s] creating rename script [ 107s] RPM meta information is identical [ 107s] compare /.build.oldpackages/poppler-debugsource-0.26.5-7.2.i686.rpm /home/abuild/rpmbuild/RPMS/i686/poppler-debugsource-0.26.5-7.3.i686.rpm [ 107s] Comparing poppler-debugsource-0.26.5-7.2.i686.rpm to poppler-debugsource-0.26.5-7.3.i686.rpm [ 107s] comparing rpmtags [ 107s] comparing RELEASE [ 108s] comparing PROVIDES [ 108s] comparing scripts [ 108s] comparing filelist [ 108s] comparing file checksum [ 108s] creating rename script [ 108s] RPM meta information is identical [ 108s] compare /.build.oldpackages/poppler-tools-0.26.5-7.2.i686.rpm /home/abuild/rpmbuild/RPMS/i686/poppler-tools-0.26.5-7.3.i686.rpm [ 108s] Comparing poppler-tools-0.26.5-7.2.i686.rpm to poppler-tools-0.26.5-7.3.i686.rpm [ 108s] comparing rpmtags [ 108s] comparing RELEASE [ 108s] comparing PROVIDES [ 108s] comparing scripts [ 108s] comparing filelist [ 108s] comparing file checksum [ 108s] creating rename script [ 108s] RPM file checksum differs. [ 108s] Extracting packages [ 108s] /usr/bin/pdfinfo differs in ELF section .comment [ 108s] --- /tmp/tmp.8Ki63pXhWT/tmp.fIPMlIkUOW 2015-06-23 13:25:30.851321108 +0000 [ 108s] +++ /tmp/tmp.8Ki63pXhWT/tmp.tkoQOCJvBU 2015-06-23 13:25:30.851321108 +0000 [ 108s] @@ -3,4 +3,4 @@ [ 108s] [ 108s] Contents of section .comment: [ 108s] 0000 4743433a 20285469 7a656e29 20342e39 GCC: (Tizen) 4.9 [ 108s] - 0010 00 . [ 108s] + 0010 2e3200 .2. [ 108s] compare /.build.oldpackages/poppler-tools-debuginfo-0.26.5-7.2.i686.rpm /home/abuild/rpmbuild/RPMS/i686/poppler-tools-debuginfo-0.26.5-7.3.i686.rpm [ 108s] skipping -debuginfo package [ 108s] comparing /.build.oldpackages/rpmlint.log and /home/abuild/rpmbuild/OTHER/rpmlint.log [ 109s] ... saving built statistics [ 109s] ... saving built packages [ 109s] /home/abuild/rpmbuild/RPMS/i686/libpoppler-0.26.5-7.3.i686.rpm [ 109s] /home/abuild/rpmbuild/RPMS/i686/libpoppler-debuginfo-0.26.5-7.3.i686.rpm [ 109s] /home/abuild/rpmbuild/RPMS/i686/libpoppler-devel-0.26.5-7.3.i686.rpm [ 109s] /home/abuild/rpmbuild/RPMS/i686/libpoppler-glib-0.26.5-7.3.i686.rpm [ 109s] /home/abuild/rpmbuild/RPMS/i686/libpoppler-glib-debuginfo-0.26.5-7.3.i686.rpm [ 109s] /home/abuild/rpmbuild/RPMS/i686/libpoppler-glib-devel-0.26.5-7.3.i686.rpm [ 109s] /home/abuild/rpmbuild/RPMS/i686/poppler-debugsource-0.26.5-7.3.i686.rpm [ 109s] /home/abuild/rpmbuild/RPMS/i686/poppler-tools-0.26.5-7.3.i686.rpm [ 109s] /home/abuild/rpmbuild/RPMS/i686/poppler-tools-debuginfo-0.26.5-7.3.i686.rpm [ 109s] /home/abuild/rpmbuild/SRPMS/poppler-0.26.5-7.3.src.rpm [ 109s] /home/abuild/rpmbuild/OTHER/_statistics [ 109s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 109s] [ 109s] w11 finished "build poppler.spec" at Tue Jun 23 13:25:31 UTC 2015. [ 109s] [ 112s] [ 104.148689] SysRq : Power Off [ 112s] [ 104.260399] Power down. [ 112s] build: extracting built packages... [ 112s] libpoppler-0.26.5-7.3.i686.rpm [ 112s] libpoppler-debuginfo-0.26.5-7.3.i686.rpm [ 112s] libpoppler-devel-0.26.5-7.3.i686.rpm [ 112s] libpoppler-glib-0.26.5-7.3.i686.rpm [ 112s] libpoppler-glib-debuginfo-0.26.5-7.3.i686.rpm [ 112s] libpoppler-glib-devel-0.26.5-7.3.i686.rpm [ 112s] poppler-debugsource-0.26.5-7.3.i686.rpm [ 112s] poppler-tools-0.26.5-7.3.i686.rpm [ 112s] poppler-tools-debuginfo-0.26.5-7.3.i686.rpm [ 112s] poppler-0.26.5-7.3.src.rpm [ 112s] _statistics [ 112s] rpmlint.log