[ 0s] Using BUILD_ROOT=/srv/build/root_2/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_2/root [ 0s] [ 0s] [ 0s] w15 started "build _service:gbs:dracut.spec" at Fri Apr 14 16:56:56 UTC 2017. [ 0s] [ 0s] Building dracut for project 'Tizen:Common' repository 'arm-wayland' arch 'armv7l' srcmd5 'c34a9884c2a3ec235c11218dfe7cf25e' [ 0s] [ 0s] processing specfile /srv/build/root_2/.build-srcdir/_service:gbs:dracut.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_2/.build-srcdir/_service:gbs:dracut.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_2/.build.rpmlist /srv/build/root_2/.build-srcdir/_service:gbs:dracut.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 0s] [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] Copying qemu-fix-build-hang.sh [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/40] preinstalling libmagic-data... [ 0s] [2/40] preinstalling setup... [ 0s] [3/40] preinstalling filesystem... [ 0s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling libgcc... [ 1s] [6/40] preinstalling bash... [ 1s] [7/40] preinstalling diffutils... [ 1s] [8/40] preinstalling grep... [ 1s] [9/40] preinstalling libattr... [ 1s] [10/40] preinstalling libbz2... [ 1s] [11/40] preinstalling libcap... [ 1s] [12/40] preinstalling libelf... [ 1s] [13/40] preinstalling libfreebl3... [ 1s] [14/40] preinstalling liblua... [ 1s] [15/40] preinstalling liblzma... [ 1s] [16/40] preinstalling libncurses... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libsmack... [ 1s] [19/40] preinstalling libsqlite... [ 1s] [20/40] preinstalling libuuid... [ 1s] [21/40] preinstalling nspr... [ 1s] [22/40] preinstalling sed... [ 1s] [23/40] preinstalling zlib... [ 1s] [24/40] preinstalling qemu-accel-x86_64-armv7l... [ 6s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 7s] [26/40] preinstalling coreutils... [ 7s] [27/40] preinstalling libacl... [ 7s] [28/40] preinstalling libblkid... [ 7s] [29/40] preinstalling libreadline... [ 7s] [30/40] preinstalling smack... [ 7s] [31/40] preinstalling bzip2... [ 7s] [32/40] preinstalling libmagic... [ 7s] [33/40] preinstalling libxml2... [ 7s] [34/40] preinstalling libmount... [ 7s] [35/40] preinstalling tar... [ 7s] [36/40] preinstalling util-linux... [ 7s] [37/40] preinstalling util-linux-su... [ 7s] [38/40] preinstalling nss... [ 7s] [39/40] preinstalling libsoftokn3... [ 7s] [40/40] preinstalling rpm... [ 8s] [ 8s] [1/10] preinstalling libext2fs... [ 8s] [2/10] preinstalling libpcre... [ 8s] [3/10] preinstalling libsmartcols... [ 8s] [4/10] preinstalling libuuid... [ 8s] [5/10] preinstalling perl... [ 9s] [6/10] preinstalling procps-ng... [ 9s] [7/10] preinstalling grep... [ 9s] [8/10] preinstalling libblkid... [ 9s] [9/10] preinstalling libmount... [ 9s] [10/10] preinstalling util-linux... [ 9s] copying packages... [ 9s] reordering...cycle: libsoftokn3 -> nss [ 9s] breaking dependency nss -> libsoftokn3 [ 9s] done [ 15s] booting kvm ... [ 15s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 6000 -drive file=/srv/build/root_2/root,if=virtio,cache=none -drive file=/srv/build/root_2/root,if=ide,index=0,cache=none -drive file=/srv/build/root_2/swap,if=virtio,cache=none -smp 4 [ 18s] doing fast boot [ 19s] Creating device nodes with udev [ 21s] Waiting for device /dev/vda to appear: ok [ 21s] fsck from util-linux 2.21.2 [ 21s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 21s] /dev/vda: clean, 5199/2392064 files, 273674/9568256 blocks [ 21s] fsck succeeded. Mounting root device read-write. [ 21s] Mounting root /dev/vda [ 21s] mount -o rw -t ext4 /dev/vda /root [ 21s] replacing /etc/mtab with symlink to /proc/self/mounts [ 27s] 2nd stage started in virtual machine [ 27s] machine type: armv7l [ 29s] swapon: /dev/vdb: found signature [pagesize=4096, signature=swap] [ 29s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 29s] swapon /dev/vdb [ 29s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 38s] mount: none is already mounted or /proc busy [ 39s] mount: none is already mounted or /dev/pts busy [ 39s] logging output to //.build.log... [ 42s] processing specfile /.build-srcdir/_service:gbs:dracut.spec ... [ 43s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:dracut.spec build rpmlint-Factory ... [ 58s] running qemu-linux-user-x86_64-cross postinstall script [ 58s] running qemu-accel-x86_64-armv7l postinstall script [ 58s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/6.2.1/liblto_plugin.so': No such file or directory [ 58s] running setup postinstall script [ 58s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 58s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 58s] initializing rpm db... [ 83s] [1/118] installing libmagic-data-5.28-6.2 [ 85s] [2/118] installing setup-0.9-5.2 [ 86s] [3/118] installing terminfo-base-5.9-3.2 [ 86s] [4/118] installing filesystem-3.1-13.2 [ 90s] [5/118] installing glibc-2.24-1.1 [ 92s] [6/118] installing libatomic-6.2.1-23.2 [ 92s] [7/118] installing libgcc-6.2.1-23.2 [ 92s] [8/118] installing bash-3.2.57-3.6 [ 93s] [9/118] installing binutils-2.27-1.2 [ 95s] [10/118] installing cpio-2.11-3.2 [ 95s] [11/118] installing diffutils-3.3-1.15 [ 95s] [12/118] installing findutils-4.3.8-3.3 [ 95s] [13/118] installing hostname-3.12-1.10 [ 95s] [14/118] installing libattr-2.4.47-2.3 [ 96s] [15/118] installing libbz2-1.0.6-2.40 [ 97s] [16/118] installing libcap-2.24-2.2 [ 98s] [17/118] installing libcares-1.10.0-2.3 [ 98s] [18/118] installing libelf-0.153-6.20 [ 99s] [19/118] installing libexpat-2.2.0-3.2 [ 100s] [20/118] installing libext2fs-1.42.13-3.2 [ 100s] [21/118] installing libfreebl3-3.23-6.13 [ 100s] [22/118] installing libgomp-6.2.1-23.2 [ 101s] [23/118] installing libgpg-error-1.13-4.28 [ 101s] [24/118] installing libitm-6.2.1-23.2 [ 101s] [25/118] installing libltdl-2.4.2-4.2 [ 102s] [26/118] installing liblua-5.1.4-1.20 [ 102s] [27/118] installing liblzma-5.2.2-6.2 [ 102s] [28/118] installing libpcre-8.39-4.2 [ 103s] [29/118] installing libpopt-1.16-2.9 [ 103s] [30/118] installing libpython-2.7.8-4.5 [ 103s] [31/118] installing libsmack-1.3.0-5.3 [ 103s] [32/118] installing libsmartcols-2.28-9.2 [ 104s] [33/118] installing libsqlite-3.8.10.2-1.17 [ 104s] [34/118] installing libstdc++-6.2.1-23.2 [ 105s] [35/118] installing libuuid-2.28-9.2 [ 105s] [36/118] installing m4-1.4.17-2.3 [ 105s] [37/118] installing net-tools-2.0_20121208git-1.13 [ 105s] [38/118] installing nghttp2-1.20.0-3.2 [ 106s] [39/118] installing nspr-4.12-5.12 [ 106s] [40/118] installing patch-2.7-1.12 [ 106s] [41/118] installing pkg-config-0.28-1.15 [ 107s] [42/118] installing sed-4.1c-2.8 [ 107s] [43/118] installing update-alternatives-1.18.15-2.2 [ 107s] [44/118] installing which-2.20-1.10 [ 108s] [45/118] installing zlib-1.2.8-3.2 [ 109s] [46/118] installing libncurses-5.9-3.2 [ 110s] [47/118] installing shadow-utils-4.1.4.2-6.1 [ 110s] [48/118] installing build-compare-2015.04.28-6.25 [ 110s] [49/118] installing libstdc++-devel-6.2.1-23.2 [ 110s] [50/118] installing qemu-linux-user-x86_64-cross-2.7.0-1.2.1 [ 113s] [51/118] installing cpp-6.2.1-23.2 [ 113s] [52/118] installing gcc-c++-6.2.1-23.2 [ 114s] [53/118] installing coreutils-6.9-8.3 [ 114s] [54/118] installing dash-0.5.7-1.11 [ 114s] [55/118] installing db4-4.8.30.NC-2.3 [ 115s] [56/118] installing gawk-3.1.5-2.13 [ 115s] [57/118] installing grep-2.5.2-2.13 [ 115s] [58/118] installing less-466-1.13 [ 115s] [59/118] installing libacl-2.2.52-4.2 [ 115s] [60/118] installing libasm-0.153-6.20 [ 116s] [61/118] installing libblkid-2.28-9.2 [ 116s] [62/118] installing libcc1-6.2.1-23.2 [ 116s] [63/118] installing libgcrypt-1.7.1-3.6 [ 116s] [64/118] installing libopenssl-1.0.2j-14.7 [ 117s] [65/118] installing libreadline-5.2-2.8 [ 117s] [66/118] installing libubsan-6.2.1-23.2 [ 117s] [67/118] installing make-4.0-2.3 [ 117s] [68/118] installing nss-certs-3.23-6.13 [ 117s] [69/118] installing procps-ng-3.3.9-4.2 [ 117s] [70/118] installing smack-1.3.0-5.3 [ 117s] [71/118] installing bzip2-1.0.6-2.40 [ 117s] [72/118] installing libmagic-5.28-6.2 [ 118s] [73/118] installing libxml2-2.9.4-5.6 [ 118s] [74/118] installing xz-5.2.2-6.2 [ 118s] [75/118] installing libdw-0.153-6.20 [ 118s] [76/118] installing linux-glibc-devel-3.10-1.5 [ 118s] [77/118] installing file-5.28-6.2 [ 118s] [78/118] installing glibc-locale-2.24-1.1 [ 119s] [79/118] installing libmount-2.28-9.2 [ 119s] [80/118] installing tar-1.17-2.10 [ 120s] [81/118] installing gzip-1.3.12-2.16 [ 120s] [82/118] installing libfdisk1-2.28-9.2 [ 120s] [83/118] installing libxml2-tools-2.9.4-5.6 [ 120s] [84/118] installing pam-1.1.6-5.2 [ 120s] [85/118] installing perl-5.20.0-4.8 [ 123s] [86/118] installing rsync-3.1.1-5.20 [ 123s] [87/118] installing tzdata-2016i-3.2 [ 123s] [88/118] installing libcurl-7.53.1-21.3 [ 124s] [89/118] installing elfutils-0.153-6.20 [ 124s] [90/118] installing libxslt-1.1.29-2.7 [ 124s] [91/118] installing gcc-6.2.1-23.2 [ 125s] [92/118] installing python-2.7.8-4.5 [ 125s] [93/118] installing build-mkbaselibs-20120927-1.5 [ 126s] [94/118] installing perl-Error-0.17017-5.4 [ 126s] [95/118] installing glibc-devel-2.24-1.1 [ 126s] [96/118] installing qemu-accel-x86_64-armv7l-0.4-16.1 [ 137s] warning: %post(qemu-accel-x86_64-armv7l-0.4-16.1.armv7l) scriptlet failed, exit status 1 [ 137s] [97/118] installing autoconf-2.69-1.8 [ 138s] [98/118] installing libxslt-tools-1.1.29-2.7 [ 138s] [99/118] installing pam-modules-extra-1.1.6-5.2 [ 138s] [100/118] installing python-xml-2.7.8-4.5 [ 138s] [101/118] installing sgml-skel-0.6-5.3 [ 138s] [102/118] installing util-linux-2.28-9.2 [ 142s] [103/118] installing iso_ent-2000.11.03-6.3 [ 142s] [104/118] installing automake-1.14.1-1.6 [ 143s] [105/118] installing util-linux-su-2.28-9.2 [ 143s] [106/118] installing build-20120927-1.5 [ 143s] [107/118] installing xmlcharent-0.3-5.5 [ 144s] [108/118] installing openssh-6.6p1-7.6 [ 144s] Usage: groupadd [options] GROUP [ 144s] [ 144s] Options: [ 144s] -f, --force exit successfully if the group already exists, [ 144s] and cancel -g if the GID is already used [ 144s] -g, --gid GID use GID for the new group [ 144s] -h, --help display this help message and exit [ 144s] -K, --key KEY=VALUE override /etc/login.defs defaults [ 144s] -o, --non-unique allow to create groups with duplicate [ 144s] (non-unique) GID [ 144s] -p, --password PASSWORD use this encrypted password for the new group [ 144s] -r, --system create a system account [ 144s] [ 144s] [109/118] installing libtool-2.4.2-4.2 [ 145s] [110/118] installing docbook_4-4.5-6.6 [ 146s] [111/118] installing git-core-2.0.1-7.9 [ 151s] [112/118] installing git-2.0.1-7.9 [ 152s] [113/118] installing docbook-xsl-stylesheets-1.78.1-6.62 [ 153s] [114/118] installing asciidoc-8.6.6-6.4 [ 153s] [115/118] installing nss-3.23-6.13 [ 154s] [116/118] installing libsoftokn3-3.23-6.13 [ 154s] [117/118] installing rpm-4.11.0.1-14.1 [ 160s] [118/118] installing rpm-build-4.11.0.1-14.1 [ 160s] removing nis flags from //etc/nsswitch.conf... [ 160s] now finalizing build dir... [ 168s] build target is armv7l-tizen-linux [ 168s] ----------------------------------------------------------------- [ 168s] I have the following modifications for dracut.spec: [ 168s] 9c9 [ 168s] < Release: 0 [ 168s] --- [ 168s] > Release: 1.86 [ 168s] 256a257 [ 168s] > %changelog [ 168s] ----------------------------------------------------------------- [ 168s] ----- building dracut.spec (user abuild) [ 168s] ----------------------------------------------------------------- [ 168s] ----------------------------------------------------------------- [ 168s] Running qemu build hang workaround... [ 168s] /bin/ps command found [ 168s] QEMU_HANG_FIX_PID=1887 [ 168s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Common/arm-wayland/c34a9884c2a3ec235c11218dfe7cf25e-dracut' /home/abuild/rpmbuild/SOURCES/dracut.spec [ 168s] Building target platforms: armv7l-tizen-linux [ 168s] Building for target armv7l-tizen-linux [ 168s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.6fPvmH [ 168s] + umask 022 [ 168s] + cd /home/abuild/rpmbuild/BUILD [ 168s] + cd /home/abuild/rpmbuild/BUILD [ 168s] + rm -rf dracut-032 [ 168s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/dracut-032.tar.xz [ 168s] + /bin/tar -xf - [ 168s] + STATUS=0 [ 168s] + '[' 0 -ne 0 ']' [ 168s] + cd dracut-032 [ 168s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 168s] + echo 'Patch #0 (0001-modify-ln-relative-with-cd-ln.patch):' [ 168s] Patch #0 (0001-modify-ln-relative-with-cd-ln.patch): [ 168s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0001-modify-ln-relative-with-cd-ln.patch [ 168s] + /bin/patch -p1 --fuzz=2 [ 168s] patching file Makefile [ 169s] + cp /home/abuild/rpmbuild/SOURCES/dracut.manifest . [ 169s] + exit 0 [ 169s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.C40PUU [ 169s] + umask 022 [ 169s] + cd /home/abuild/rpmbuild/BUILD [ 169s] + cd dracut-032 [ 169s] ++ uname -m [ 169s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 169s] + LANG=C [ 169s] + export LANG [ 169s] + unset DISPLAY [ 169s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 169s] + export CFLAGS [ 169s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 169s] + export CXXFLAGS [ 169s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 169s] + export FFLAGS [ 169s] + LDFLAGS= [ 169s] + export LDFLAGS [ 169s] + LD_AS_NEEDED=1 [ 169s] + export LD_AS_NEEDED [ 169s] + make all [ 172s] cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/dracut-install.o install/dracut-install.c [ 172s] install/dracut-install.c: In function 'resolve_deps': [ 172s] install/dracut-install.c:338:17: warning: ignoring return value of 'read', declared with attribute warn_unused_result [-Wunused-result] [ 172s] read(fd, buf, LINE_MAX); [ 172s] ^~~~~~~~~~~~~~~~~~~~~~~ [ 172s] install/dracut-install.c: In function 'cp': [ 172s] install/dracut-install.c:223:33: warning: ignoring return value of 'fchown', declared with attribute warn_unused_result [-Wunused-result] [ 172s] fchown(dest_desc, (__uid_t)-1, sb.st_gid); [ 172s] ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 172s] cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/hashmap.o install/hashmap.c [ 172s] cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/log.o install/log.c [ 172s] cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/util.o install/util.c [ 172s] cc install/dracut-install.o install/hashmap.o install/log.o install/util.o -o install/dracut-install [ 173s] ln -fs install/dracut-install dracut-install [ 173s] asciidoc -d manpage -b docbook -o lsinitrd.1.xml lsinitrd.1.asc [ 179s] xsltproc -o lsinitrd.1 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl lsinitrd.1.xml [ 179s] Note: Writing lsinitrd.1 [ 179s] asciidoc -d manpage -b docbook -o dracut.conf.5.xml dracut.conf.5.asc [ 189s] xsltproc -o dracut.conf.5 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.conf.5.xml [ 190s] Note: Writing dracut.conf.5 [ 190s] asciidoc -d manpage -b docbook -o dracut.cmdline.7.xml dracut.cmdline.7.asc [ 219s] xsltproc -o dracut.cmdline.7 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.cmdline.7.xml [ 219s] Note: Writing dracut.cmdline.7 [ 220s] asciidoc -d manpage -b docbook -o dracut.bootup.7.xml dracut.bootup.7.asc [ 224s] xsltproc -o dracut.bootup.7 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.bootup.7.xml [ 225s] Note: Writing dracut.bootup.7 [ 225s] asciidoc -d manpage -b docbook -o dracut.8.xml dracut.8.asc [ 246s] xsltproc -o dracut.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.8.xml [ 246s] Note: Writing dracut.8 [ 246s] asciidoc -d manpage -b docbook -o dracut-catimages.8.xml dracut-catimages.8.asc [ 252s] xsltproc -o dracut-catimages.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut-catimages.8.xml [ 252s] Note: Writing dracut-catimages.8 [ 252s] asciidoc -d manpage -b docbook -o mkinitrd.8.xml mkinitrd.8.asc [ 258s] xsltproc -o mkinitrd.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl mkinitrd.8.xml [ 259s] Note: Writing mkinitrd.8 [ 259s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-cmdline.service.8.xml modules.d/98systemd/dracut-cmdline.service.8.asc [ 264s] xsltproc -o modules.d/98systemd/dracut-cmdline.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-cmdline.service.8.xml [ 264s] Note: Writing dracut-cmdline.service.8 [ 264s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-initqueue.service.8.xml modules.d/98systemd/dracut-initqueue.service.8.asc [ 269s] xsltproc -o modules.d/98systemd/dracut-initqueue.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-initqueue.service.8.xml [ 269s] Note: Writing dracut-initqueue.service.8 [ 269s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-mount.service.8.xml modules.d/98systemd/dracut-mount.service.8.asc [ 274s] xsltproc -o modules.d/98systemd/dracut-mount.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-mount.service.8.xml [ 274s] Note: Writing dracut-mount.service.8 [ 274s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-shutdown.service.8.xml modules.d/98systemd/dracut-shutdown.service.8.asc [ 280s] xsltproc -o modules.d/98systemd/dracut-shutdown.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-shutdown.service.8.xml [ 280s] Note: Writing dracut-shutdown.service.8 [ 280s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-mount.service.8.xml modules.d/98systemd/dracut-pre-mount.service.8.asc [ 285s] xsltproc -o modules.d/98systemd/dracut-pre-mount.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-mount.service.8.xml [ 285s] Note: Writing dracut-pre-mount.service.8 [ 285s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-pivot.service.8.xml modules.d/98systemd/dracut-pre-pivot.service.8.asc [ 290s] xsltproc -o modules.d/98systemd/dracut-pre-pivot.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-pivot.service.8.xml [ 290s] Note: Writing dracut-pre-pivot.service.8 [ 290s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-trigger.service.8.xml modules.d/98systemd/dracut-pre-trigger.service.8.asc [ 295s] xsltproc -o modules.d/98systemd/dracut-pre-trigger.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-trigger.service.8.xml [ 296s] Note: Writing dracut-pre-trigger.service.8 [ 296s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-udev.service.8.xml modules.d/98systemd/dracut-pre-udev.service.8.asc [ 301s] xsltproc -o modules.d/98systemd/dracut-pre-udev.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-udev.service.8.xml [ 301s] Note: Writing dracut-pre-udev.service.8 [ 301s] asciidoc -a numbered -d book -b docbook -o dracut.xml dracut.asc [ 379s] xsltproc -o dracut.html --xinclude -nonet \ [ 379s] --stringparam html.stylesheet \ [ 379s] http://docs.fedoraproject.org/en-US/Common_Content/css/default.css \ [ 379s] http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl dracut.xml [ 379s] rm -f -- dracut.xml [ 379s] rm modules.d/98systemd/dracut-mount.service.8.xml dracut.8.xml dracut.cmdline.7.xml modules.d/98systemd/dracut-pre-mount.service.8.xml dracut.bootup.7.xml modules.d/98systemd/dracut-initqueue.service.8.xml modules.d/98systemd/dracut-pre-pivot.service.8.xml mkinitrd.8.xml modules.d/98systemd/dracut-cmdline.service.8.xml dracut.conf.5.xml lsinitrd.1.xml modules.d/98systemd/dracut-pre-udev.service.8.xml dracut-catimages.8.xml modules.d/98systemd/dracut-pre-trigger.service.8.xml modules.d/98systemd/dracut-shutdown.service.8.xml [ 379s] + exit 0 [ 379s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.qKm7GE [ 379s] + umask 022 [ 379s] + cd /home/abuild/rpmbuild/BUILD [ 379s] + cd dracut-032 [ 379s] + LANG=C [ 379s] + export LANG [ 379s] + unset DISPLAY [ 379s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm [ 379s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm [ 379s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm libdir=/usr/lib bindir=/usr/bin systemdsystemunitdir=/usr/lib/systemd/system sysconfdir=/etc mandir=/usr/share/man [ 379s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/lib/dracut [ 379s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/bin [ 379s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/etc [ 379s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/lib/dracut/modules.d [ 379s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/share/man/man1 /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/share/man/man5 /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/share/man/man7 /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/share/man/man8 [ 379s] install -m 0755 dracut.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/bin/dracut [ 380s] install -m 0755 dracut-catimages.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/bin/dracut-catimages [ 380s] install -m 0755 mkinitrd-dracut.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/bin/mkinitrd [ 380s] install -m 0755 lsinitrd.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/bin/lsinitrd [ 380s] install -m 0644 dracut.conf /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/etc/dracut.conf [ 380s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/etc/dracut.conf.d [ 380s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/lib/dracut/dracut.conf.d [ 380s] install -m 0755 dracut-functions.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/lib/dracut/dracut-functions.sh [ 380s] install -m 0755 dracut-version.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/lib/dracut/dracut-version.sh [ 380s] ln -fs dracut-functions.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/lib/dracut/dracut-functions [ 380s] install -m 0755 dracut-logger.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/lib/dracut/dracut-logger.sh [ 380s] install -m 0755 dracut-initramfs-restore.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/lib/dracut/dracut-initramfs-restore [ 380s] cp -arx modules.d /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/lib/dracut [ 380s] for i in lsinitrd.1; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/share/man/man1/${i##*/}; done [ 380s] for i in dracut.conf.5; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/share/man/man5/${i##*/}; done [ 380s] for i in dracut.cmdline.7 dracut.bootup.7; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/share/man/man7/${i##*/}; done [ 380s] for i in dracut.8 dracut-catimages.8 mkinitrd.8 modules.d/98systemd/dracut-cmdline.service.8 modules.d/98systemd/dracut-initqueue.service.8 modules.d/98systemd/dracut-mount.service.8 modules.d/98systemd/dracut-shutdown.service.8 modules.d/98systemd/dracut-pre-mount.service.8 modules.d/98systemd/dracut-pre-pivot.service.8 modules.d/98systemd/dracut-pre-trigger.service.8 modules.d/98systemd/dracut-pre-udev.service.8; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/share/man/man8/${i##*/}; done [ 380s] ln -fs dracut.cmdline.7 /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/share/man/man7/dracut.kernel.7 [ 380s] if [ -n "/usr/lib/systemd/system" ]; then \ [ 380s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/lib/systemd/system; \ [ 380s] cd /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm && ln -sf .//usr/lib/dracut/modules.d/98systemd/dracut-shutdown.service .//usr/lib/systemd/system/dracut-shutdown.service && cd - ; \ [ 380s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/lib/systemd/system/shutdown.target.wants; \ [ 380s] ln -s ../dracut-shutdown.service \ [ 380s] /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/lib/systemd/system/shutdown.target.wants/dracut-shutdown.service; \ [ 380s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/lib/systemd/system/initrd.target.wants; \ [ 380s] for i in \ [ 380s] dracut-cmdline.service \ [ 380s] dracut-initqueue.service \ [ 380s] dracut-mount.service \ [ 380s] dracut-pre-mount.service \ [ 380s] dracut-pre-pivot.service \ [ 380s] dracut-pre-trigger.service \ [ 380s] dracut-pre-udev.service \ [ 380s] ; do \ [ 380s] cd /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm && ln -sf .//usr/lib/dracut/modules.d/98systemd/$i .//usr/lib/systemd/system && cd -; \ [ 380s] ln -s ../$i \ [ 380s] /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/lib/systemd/system/initrd.target.wants/$i; \ [ 380s] done \ [ 380s] fi [ 380s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 380s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 380s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 380s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 380s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 380s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 380s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 380s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 380s] if [ -f install/dracut-install ]; then \ [ 380s] install -m 0755 install/dracut-install /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/lib/dracut/dracut-install; \ [ 380s] fi [ 380s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/lib/kernel/install.d [ 380s] install -m 0755 50-dracut.install /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/lib/kernel/install.d/50-dracut.install [ 380s] install -m 0755 51-dracut-rescue.install /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/lib/kernel/install.d/51-dracut-rescue.install [ 380s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/share/bash-completion/completions [ 380s] install -m 0644 dracut-bash-completion.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/share/bash-completion/completions/dracut [ 380s] install -m 0644 lsinitrd-bash-completion.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/share/bash-completion/completions/lsinitrd [ 380s] + echo DRACUT_VERSION=032-1.86 [ 380s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm//usr/lib/dracut/modules.d/01fips [ 380s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm//usr/lib/dracut/modules.d/02fips-aesni [ 380s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm//usr/lib/dracut/modules.d/50gensplash [ 380s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm//usr/lib/dracut/modules.d/96securityfs [ 380s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm//usr/lib/dracut/modules.d/97masterkey [ 380s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm//usr/lib/dracut/modules.d/98integrity [ 380s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm//usr/lib/dracut/modules.d/98selinux [ 380s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/boot/dracut [ 380s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/var/lib/dracut/overlay [ 380s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/var/log [ 380s] + touch /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/var/log/dracut.log [ 381s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/com/initramfs [ 381s] + install -m 0644 dracut.conf.d/suse.conf.example /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/etc/dracut.conf.d/01-dist.conf [ 381s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/etc/logrotate.d [ 381s] + install -m 0644 dracut.logrotate /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/etc/logrotate.d/dracut_log [ 381s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/dracut-032 [ 381s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/lib/dracut/dracut-install [ 386s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 386s] cpio: glibc-2.24/csu/init.c: Cannot stat: No such file or directory [ 386s] cpio: glibc-2.24/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 386s] cpio: glibc-2.24/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 386s] cpio: glibc-2.24/sysdeps/arm/start.S: Cannot stat: No such file or directory [ 386s] 195 blocks [ 386s] + /usr/lib/rpm/check-buildroot [ 386s] + /usr/lib/rpm//brp-compress [ 386s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 387s] + /usr/lib/rpm/brp-python-hardlink [ 387s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm [ 387s] Processing files: dracut-032-1.86.armv7l [ 387s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 387s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 387s] [ 387s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.K87AjH [ 387s] + umask 022 [ 387s] + cd /home/abuild/rpmbuild/BUILD [ 387s] + cd dracut-032 [ 387s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/share/licenses/dracut [ 387s] + export LICENSEDIR [ 387s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/share/licenses/dracut [ 387s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm/usr/share/licenses/dracut [ 387s] + exit 0 [ 388s] Provides: config(dracut) = 032-1.86 dracut = 032-1.86 dracut(armv7l-32) = 032-1.86 [ 388s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 388s] Requires: /bin/bash /bin/sh ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libc.so.6(GLIBC_2.8) libgcc_s.so.1 libgcc_s.so.1(GCC_3.0) libgcc_s.so.1(GCC_3.3.1) libgcc_s.so.1(GCC_3.5) [ 388s] Conflicts: systemd < 187 [ 388s] Processing files: dracut-debugsource-032-1.86.armv7l [ 388s] Provides: dracut-debugsource = 032-1.86 dracut-debugsource(armv7l-32) = 032-1.86 [ 388s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 388s] Processing files: dracut-network-032-1.86.armv7l [ 388s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 388s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 388s] [ 388s] Provides: dracut-network = 032-1.86 dracut-network(armv7l-32) = 032-1.86 [ 388s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 388s] Requires: /bin/bash /bin/sh [ 388s] Processing files: dracut-caps-032-1.86.armv7l [ 388s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 388s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 388s] [ 388s] Provides: dracut-caps = 032-1.86 dracut-caps(armv7l-32) = 032-1.86 [ 388s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 388s] Requires: /bin/bash [ 388s] Processing files: dracut-tools-032-1.86.armv7l [ 388s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 388s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 388s] [ 388s] Provides: dracut-tools = 032-1.86 dracut-tools(armv7l-32) = 032-1.86 [ 388s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 388s] Requires: /bin/bash [ 388s] Processing files: dracut-debuginfo-032-1.86.armv7l [ 388s] Provides: dracut-debuginfo = 032-1.86 dracut-debuginfo(armv7l-32) = 032-1.86 [ 388s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 388s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm [ 388s] warning: Could not canonicalize hostname: w15 [ 388s] Wrote: /home/abuild/rpmbuild/SRPMS/dracut-032-1.86.src.rpm [ 388s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/dracut-032-1.86.armv7l.rpm [ 388s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/dracut-debugsource-032-1.86.armv7l.rpm [ 388s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/dracut-network-032-1.86.armv7l.rpm [ 388s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/dracut-caps-032-1.86.armv7l.rpm [ 388s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/dracut-tools-032-1.86.armv7l.rpm [ 388s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/dracut-debuginfo-032-1.86.armv7l.rpm [ 388s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.ejAS0p [ 388s] + umask 022 [ 388s] + cd /home/abuild/rpmbuild/BUILD [ 388s] + cd dracut-032 [ 388s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.86.arm [ 388s] + exit 0 [ 388s] ... checking for files with abuild user/group [ 388s] Killing qemu-hang-fix PID=1887 [ 388s] ... creating baselibs [ 389s] ... comparing built packages with the former built [ 389s] /usr/lib/build/pkg-diff.sh [ 389s] compare /.build.oldpackages/dracut-032-1.85.src.rpm /home/abuild/rpmbuild/SRPMS/dracut-032-1.86.src.rpm [ 390s] This is not a prerelease project. Compare the project name. [ 390s] comparing rpmtags [ 390s] comparing RELEASE [ 390s] comparing PROVIDES [ 390s] comparing scripts [ 390s] comparing filelist [ 390s] comparing file checksum [ 390s] RPM meta information is identical [ 390s] compare /.build.oldpackages/dracut-032-1.85.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/dracut-032-1.86.armv7l.rpm [ 391s] Comparing dracut-032-1.85.armv7l.rpm to dracut-032-1.86.armv7l.rpm [ 391s] This is not a prerelease project. Compare the project name. [ 391s] comparing rpmtags [ 391s] comparing RELEASE [ 391s] comparing PROVIDES [ 391s] comparing scripts [ 391s] comparing filelist [ 391s] comparing file checksum [ 391s] creating rename script [ 391s] RPM file checksum differs. [ 391s] Extracting packages [ 391s] /usr/lib/dracut/dracut-version.sh differs (ASCII text) [ 391s] --- old//usr/lib/dracut/dracut-version.sh 2017-04-13 21:51:57.000000000 +0000 [ 391s] +++ new//usr/lib/dracut/dracut-version.sh 2017-04-14 17:03:16.000000000 +0000 [ 391s] @@ -1 +1 @@ [ 391s] -DRACUT_VERSION=032-1.85 [ 391s] +DRACUT_VERSION=032-1.86 [ 391s] compare /.build.oldpackages/dracut-caps-032-1.85.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/dracut-caps-032-1.86.armv7l.rpm [ 391s] Comparing dracut-caps-032-1.85.armv7l.rpm to dracut-caps-032-1.86.armv7l.rpm [ 391s] This is not a prerelease project. Compare the project name. [ 391s] comparing rpmtags [ 391s] comparing RELEASE [ 391s] comparing PROVIDES [ 391s] comparing scripts [ 391s] comparing filelist [ 391s] comparing file checksum [ 391s] creating rename script [ 392s] RPM meta information is identical [ 392s] compare /.build.oldpackages/dracut-debuginfo-032-1.85.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/dracut-debuginfo-032-1.86.armv7l.rpm [ 392s] skipping -debuginfo package [ 392s] compare /.build.oldpackages/dracut-debugsource-032-1.85.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/dracut-debugsource-032-1.86.armv7l.rpm [ 392s] Comparing dracut-debugsource-032-1.85.armv7l.rpm to dracut-debugsource-032-1.86.armv7l.rpm [ 392s] This is not a prerelease project. Compare the project name. [ 392s] comparing rpmtags [ 392s] comparing RELEASE [ 392s] comparing PROVIDES [ 392s] comparing scripts [ 392s] comparing filelist [ 392s] comparing file checksum [ 392s] creating rename script [ 392s] RPM meta information is identical [ 392s] compare /.build.oldpackages/dracut-network-032-1.85.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/dracut-network-032-1.86.armv7l.rpm [ 392s] Comparing dracut-network-032-1.85.armv7l.rpm to dracut-network-032-1.86.armv7l.rpm [ 393s] This is not a prerelease project. Compare the project name. [ 393s] comparing rpmtags [ 393s] comparing RELEASE [ 393s] comparing PROVIDES [ 393s] comparing scripts [ 393s] comparing filelist [ 393s] comparing file checksum [ 393s] creating rename script [ 393s] RPM meta information is identical [ 393s] compare /.build.oldpackages/dracut-tools-032-1.85.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/dracut-tools-032-1.86.armv7l.rpm [ 393s] Comparing dracut-tools-032-1.85.armv7l.rpm to dracut-tools-032-1.86.armv7l.rpm [ 393s] This is not a prerelease project. Compare the project name. [ 393s] comparing rpmtags [ 393s] comparing RELEASE [ 393s] comparing PROVIDES [ 393s] comparing scripts [ 393s] comparing filelist [ 393s] comparing file checksum [ 393s] creating rename script [ 393s] RPM file checksum differs. [ 393s] Extracting packages [ 393s] Package content is identical [ 393s] ... saving built statistics [ 393s] ... saving built packages [ 394s] /home/abuild/rpmbuild/RPMS/armv7l/dracut-032-1.86.armv7l.rpm [ 394s] /home/abuild/rpmbuild/RPMS/armv7l/dracut-caps-032-1.86.armv7l.rpm [ 394s] /home/abuild/rpmbuild/RPMS/armv7l/dracut-debuginfo-032-1.86.armv7l.rpm [ 394s] /home/abuild/rpmbuild/RPMS/armv7l/dracut-debugsource-032-1.86.armv7l.rpm [ 394s] /home/abuild/rpmbuild/RPMS/armv7l/dracut-network-032-1.86.armv7l.rpm [ 394s] /home/abuild/rpmbuild/RPMS/armv7l/dracut-tools-032-1.86.armv7l.rpm [ 394s] /home/abuild/rpmbuild/SRPMS/dracut-032-1.86.src.rpm [ 394s] /home/abuild/rpmbuild/OTHER/_statistics [ 394s] [ 394s] w15 finished "build dracut.spec" at Fri Apr 14 17:03:29 UTC 2017. [ 394s] [ 397s] [ 379.020342] SysRq : Power Off [ 397s] [ 379.128353] Power down. [ 397s] build: extracting built packages... [ 397s] dracut-032-1.86.armv7l.rpm [ 397s] dracut-caps-032-1.86.armv7l.rpm [ 397s] dracut-debuginfo-032-1.86.armv7l.rpm [ 397s] dracut-debugsource-032-1.86.armv7l.rpm [ 397s] dracut-network-032-1.86.armv7l.rpm [ 397s] dracut-tools-032-1.86.armv7l.rpm [ 397s] dracut-032-1.86.src.rpm [ 397s] _statistics