[ 0s] Using BUILD_ROOT=/srv/build/root_12/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_12/root [ 0s] [ 0s] [ 0s] w14 started "build _service:gbs:dracut.spec" at Fri Apr 14 17:03:02 UTC 2017. [ 0s] [ 0s] Building dracut for project 'Tizen:Common' repository 'emulator32-wayland' arch 'i586' srcmd5 'c34a9884c2a3ec235c11218dfe7cf25e' [ 0s] [ 0s] processing specfile /srv/build/root_12/.build-srcdir/_service:gbs:dracut.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_12/.build-srcdir/_service:gbs:dracut.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/12/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_12/.build.rpmlist /srv/build/root_12/.build-srcdir/_service:gbs:dracut.spec build rpmlint-Factory ... [ 0s] Copying qemu-fix-build-hang.sh [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/35] preinstalling libmagic-data... [ 0s] [2/35] preinstalling setup... [ 0s] [3/35] preinstalling filesystem... [ 0s] [4/35] preinstalling glibc... [ 0s] [5/35] preinstalling bash... [ 0s] [6/35] preinstalling diffutils... [ 0s] [7/35] preinstalling grep... [ 0s] [8/35] preinstalling libattr... [ 0s] [9/35] preinstalling libbz2... [ 0s] [10/35] preinstalling libcap... [ 0s] [11/35] preinstalling libelf... [ 0s] [12/35] preinstalling libfreebl3... [ 0s] [13/35] preinstalling libgcc... [ 1s] [14/35] preinstalling liblua... [ 1s] [15/35] preinstalling liblzma... [ 1s] [16/35] preinstalling libncurses... [ 1s] [17/35] preinstalling libpopt... [ 1s] [18/35] preinstalling libsmack... [ 1s] [19/35] preinstalling libsqlite... [ 1s] [20/35] preinstalling nspr... [ 1s] [21/35] preinstalling sed... [ 1s] [22/35] preinstalling zlib... [ 1s] [23/35] preinstalling coreutils... [ 1s] [24/35] preinstalling libacl... [ 1s] [25/35] preinstalling libreadline... [ 1s] [26/35] preinstalling smack... [ 1s] [27/35] preinstalling bzip2... [ 1s] [28/35] preinstalling libmagic... [ 1s] [29/35] preinstalling libxml2... [ 1s] [30/35] preinstalling tar... [ 1s] [31/35] preinstalling util-linux... [ 1s] [32/35] preinstalling util-linux-su... [ 1s] [33/35] preinstalling nss... [ 1s] [34/35] preinstalling libsoftokn3... [ 1s] [35/35] preinstalling rpm... [ 1s] [ 2s] [1/10] preinstalling libext2fs... [ 2s] [2/10] preinstalling libpcre... [ 2s] [3/10] preinstalling libsmartcols... [ 2s] [4/10] preinstalling libuuid... [ 2s] [5/10] preinstalling perl... [ 3s] [6/10] preinstalling procps-ng... [ 3s] [7/10] preinstalling grep... [ 3s] [8/10] preinstalling libblkid... [ 3s] [9/10] preinstalling libmount... [ 3s] [10/10] preinstalling util-linux... [ 3s] copying packages... [ 3s] reordering...cycle: libsoftokn3 -> nss [ 3s] breaking dependency nss -> libsoftokn3 [ 3s] done [ 4s] booting kvm ... [ 4s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 6000 -drive file=/srv/build/root_12/root,if=virtio,cache=none -drive file=/srv/build/root_12/root,if=ide,index=0,cache=none -drive file=/srv/build/root_12/swap,if=virtio,cache=none -smp 4 [ 7s] doing fast boot [ 7s] Creating device nodes with udev [ 8s] Waiting for device /dev/vda to appear: ok [ 8s] fsck from util-linux 2.21.2 [ 8s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 8s] /dev/vda: clean, 4450/2392064 files, 188758/9568256 blocks [ 8s] fsck succeeded. Mounting root device read-write. [ 8s] Mounting root /dev/vda [ 8s] mount -o rw -t ext4 /dev/vda /root [ 8s] replacing /etc/mtab with symlink to /proc/self/mounts [ 8s] 2nd stage started in virtual machine [ 8s] machine type: x86_64 [ 8s] switching personality to 8... [ 8s] 2nd stage started in virtual machine [ 8s] machine type: i686 [ 8s] swapon: /dev/vdb: found signature [pagesize=4096, signature=swap] [ 8s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 8s] swapon /dev/vdb [ 8s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 8s] mount: none is already mounted or /proc busy [ 8s] mount: none is already mounted or /dev/pts busy [ 8s] logging output to //.build.log... [ 8s] processing specfile /.build-srcdir/_service:gbs:dracut.spec ... [ 8s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:dracut.spec build rpmlint-Factory ... [ 8s] running setup postinstall script [ 8s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 8s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 8s] initializing rpm db... [ 8s] [1/117] installing libmagic-data-5.28-6.2 [ 8s] [2/117] installing setup-0.9-5.2 [ 8s] [3/117] installing terminfo-base-5.9-3.2 [ 8s] [4/117] installing filesystem-3.1-13.2 [ 8s] [5/117] installing glibc-2.24-1.1 [ 9s] [6/117] installing bash-3.2.57-3.5 [ 9s] [7/117] installing binutils-2.27-1.2 [ 9s] [8/117] installing cpio-2.11-3.2 [ 9s] [9/117] installing diffutils-3.3-1.12 [ 9s] [10/117] installing findutils-4.3.8-3.3 [ 9s] [11/117] installing hostname-3.12-1.5 [ 9s] [12/117] installing libatomic-6.2.1-23.2 [ 9s] [13/117] installing libattr-2.4.47-2.3 [ 9s] [14/117] installing libbz2-1.0.6-2.40 [ 9s] [15/117] installing libcap-2.24-2.2 [ 10s] [16/117] installing libcares-1.10.0-2.3 [ 10s] [17/117] installing libelf-0.153-6.19 [ 10s] [18/117] installing libexpat-2.2.0-3.2 [ 10s] [19/117] installing libext2fs-1.42.13-3.2 [ 10s] [20/117] installing libfreebl3-3.23-6.13 [ 10s] [21/117] installing libgcc-6.2.1-23.2 [ 10s] [22/117] installing libgomp-6.2.1-23.2 [ 10s] [23/117] installing libgpg-error-1.13-4.28 [ 10s] [24/117] installing libitm-6.2.1-23.2 [ 10s] [25/117] installing libltdl-2.4.2-4.2 [ 10s] [26/117] installing liblua-5.1.4-1.22 [ 11s] [27/117] installing liblzma-5.2.2-6.2 [ 11s] [28/117] installing libpcre-8.39-4.2 [ 12s] [29/117] installing libpopt-1.16-2.7 [ 12s] [30/117] installing libpython-2.7.8-4.5 [ 12s] [31/117] installing libsmack-1.3.0-5.3 [ 12s] [32/117] installing libsmartcols-2.28-9.2 [ 13s] [33/117] installing libsqlite-3.8.10.2-1.12 [ 14s] [34/117] installing libuuid-2.28-9.2 [ 14s] [35/117] installing m4-1.4.17-2.3 [ 14s] [36/117] installing net-tools-2.0_20121208git-1.8 [ 14s] [37/117] installing nghttp2-1.20.0-3.2 [ 14s] [38/117] installing nspr-4.12-5.12 [ 15s] [39/117] installing patch-2.7-1.9 [ 15s] [40/117] installing pkg-config-0.28-1.10 [ 15s] [41/117] installing sed-4.1c-2.8 [ 16s] [42/117] installing update-alternatives-1.18.15-2.2 [ 16s] [43/117] installing which-2.20-1.5 [ 17s] [44/117] installing zlib-1.2.8-3.2 [ 17s] [45/117] installing libncurses-5.9-3.2 [ 18s] [46/117] installing shadow-utils-4.1.4.2-6.1 [ 18s] [47/117] installing build-compare-2015.04.28-6.24 [ 18s] [48/117] installing coreutils-6.9-8.3 [ 18s] [49/117] installing cpp-6.2.1-23.2 [ 22s] [50/117] installing dash-0.5.7-1.7 [ 22s] [51/117] installing gawk-3.1.5-2.9 [ 23s] [52/117] installing gcc-c++-6.2.1-23.2 [ 25s] [53/117] installing grep-2.5.2-2.9 [ 25s] [54/117] installing less-466-1.8 [ 25s] [55/117] installing libacl-2.2.52-4.2 [ 26s] [56/117] installing libasm-0.153-6.19 [ 26s] [57/117] installing libblkid-2.28-9.2 [ 26s] [58/117] installing libgcrypt-1.7.1-3.5 [ 27s] [59/117] installing libopenssl-1.0.2j-14.7 [ 27s] [60/117] installing libreadline-5.2-2.7 [ 28s] [61/117] installing libstdc++-6.2.1-23.2 [ 28s] [62/117] installing make-4.0-2.3 [ 28s] [63/117] installing nss-certs-3.23-6.13 [ 29s] [64/117] installing procps-ng-3.3.9-4.2 [ 29s] [65/117] installing smack-1.3.0-5.3 [ 29s] [66/117] installing bzip2-1.0.6-2.40 [ 29s] [67/117] installing libmagic-5.28-6.2 [ 30s] [68/117] installing libxml2-2.9.4-5.6 [ 30s] [69/117] installing xz-5.2.2-6.2 [ 30s] [70/117] installing libdw-0.153-6.19 [ 31s] [71/117] installing libstdc++-devel-6.2.1-23.2 [ 31s] [72/117] installing file-5.28-6.2 [ 33s] [73/117] installing libmount-2.28-9.2 [ 33s] [74/117] installing linux-glibc-devel-3.10-1.6 [ 34s] [75/117] installing tar-1.17-2.9 [ 34s] [76/117] installing db4-4.8.30.NC-2.3 [ 36s] [77/117] installing glibc-locale-2.24-1.1 [ 37s] [78/117] installing gzip-1.3.12-2.10 [ 37s] [79/117] installing libcc1-6.2.1-23.2 [ 37s] [80/117] installing libcilkrts-6.2.1-23.2 [ 38s] [81/117] installing libfdisk1-2.28-9.2 [ 38s] [82/117] installing libubsan-6.2.1-23.2 [ 38s] [83/117] installing libxml2-tools-2.9.4-5.6 [ 39s] [84/117] installing pam-1.1.6-5.2 [ 39s] [85/117] installing rsync-3.1.1-5.15 [ 40s] [86/117] installing tzdata-2016i-3.2 [ 40s] [87/117] installing libcurl-7.53.1-21.3 [ 41s] [88/117] installing elfutils-0.153-6.19 [ 41s] [89/117] installing libxslt-1.1.29-2.7 [ 43s] [90/117] installing glibc-devel-2.24-1.1 [ 43s] [91/117] installing libxslt-tools-1.1.29-2.7 [ 44s] [92/117] installing pam-modules-extra-1.1.6-5.2 [ 44s] [93/117] installing perl-5.20.0-4.8 [ 59s] [94/117] installing sgml-skel-0.6-5.3 [ 60s] [95/117] installing gcc-6.2.1-23.2 [ 63s] [96/117] installing python-2.7.8-4.5 [ 65s] [97/117] installing util-linux-2.28-9.2 [ 66s] [98/117] installing build-mkbaselibs-20120927-1.5 [ 66s] [99/117] installing perl-Error-0.17017-5.3 [ 67s] [100/117] installing iso_ent-2000.11.03-6.3 [ 67s] [101/117] installing autoconf-2.69-1.6 [ 68s] [102/117] installing python-xml-2.7.8-4.5 [ 68s] [103/117] installing util-linux-su-2.28-9.2 [ 68s] [104/117] installing xmlcharent-0.3-5.5 [ 68s] [105/117] installing openssh-6.6p1-7.6 [ 69s] Usage: groupadd [options] GROUP [ 69s] [ 69s] Options: [ 69s] -f, --force exit successfully if the group already exists, [ 69s] and cancel -g if the GID is already used [ 69s] -g, --gid GID use GID for the new group [ 69s] -h, --help display this help message and exit [ 69s] -K, --key KEY=VALUE override /etc/login.defs defaults [ 69s] -o, --non-unique allow to create groups with duplicate [ 69s] (non-unique) GID [ 69s] -p, --password PASSWORD use this encrypted password for the new group [ 69s] -r, --system create a system account [ 69s] [ 70s] [106/117] installing automake-1.14.1-1.6 [ 70s] [107/117] installing build-20120927-1.5 [ 70s] [108/117] installing docbook_4-4.5-6.5 [ 70s] [109/117] installing git-core-2.0.1-7.9 [ 71s] [110/117] installing git-2.0.1-7.9 [ 71s] [111/117] installing libtool-2.4.2-4.2 [ 73s] [112/117] installing docbook-xsl-stylesheets-1.78.1-6.60 [ 75s] [113/117] installing asciidoc-8.6.6-6.3 [ 76s] [114/117] installing nss-3.23-6.13 [ 76s] [115/117] installing libsoftokn3-3.23-6.13 [ 77s] [116/117] installing rpm-4.11.0.1-14.1 [ 78s] [117/117] installing rpm-build-4.11.0.1-14.1 [ 78s] removing nis flags from //etc/nsswitch.conf... [ 78s] now finalizing build dir... [ 78s] build target is i686-tizen-linux [ 78s] ----------------------------------------------------------------- [ 78s] I have the following modifications for dracut.spec: [ 78s] 9c9 [ 78s] < Release: 0 [ 78s] --- [ 78s] > Release: 1.83 [ 78s] 256a257 [ 78s] > %changelog [ 79s] ----------------------------------------------------------------- [ 79s] ----- building dracut.spec (user abuild) [ 79s] ----------------------------------------------------------------- [ 79s] ----------------------------------------------------------------- [ 79s] Running qemu build hang workaround... [ 79s] /bin/ps command found [ 79s] QEMU_HANG_FIX_PID=1328 [ 79s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=i686-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Common/emulator32-wayland/c34a9884c2a3ec235c11218dfe7cf25e-dracut' /home/abuild/rpmbuild/SOURCES/dracut.spec [ 79s] Building target platforms: i686-tizen-linux [ 79s] Building for target i686-tizen-linux [ 79s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.LQ6WFO [ 79s] + umask 022 [ 79s] + cd /home/abuild/rpmbuild/BUILD [ 79s] + cd /home/abuild/rpmbuild/BUILD [ 79s] + rm -rf dracut-032 [ 79s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/dracut-032.tar.xz [ 79s] + /bin/tar -xf - [ 79s] + STATUS=0 [ 79s] + '[' 0 -ne 0 ']' [ 79s] + cd dracut-032 [ 79s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 79s] + echo 'Patch #0 (0001-modify-ln-relative-with-cd-ln.patch):' [ 79s] Patch #0 (0001-modify-ln-relative-with-cd-ln.patch): [ 79s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0001-modify-ln-relative-with-cd-ln.patch [ 79s] + /bin/patch -p1 --fuzz=2 [ 79s] patching file Makefile [ 79s] + cp /home/abuild/rpmbuild/SOURCES/dracut.manifest . [ 79s] + exit 0 [ 79s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.AiRJ1Q [ 79s] + umask 022 [ 79s] + cd /home/abuild/rpmbuild/BUILD [ 79s] + cd dracut-032 [ 79s] ++ uname -m [ 79s] + [[ i686 == \a\a\r\c\h\6\4 ]] [ 79s] + LANG=C [ 79s] + export LANG [ 79s] + unset DISPLAY [ 79s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 79s] + export CFLAGS [ 79s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 79s] + export CXXFLAGS [ 79s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I%_fmoddir' [ 79s] + export FFLAGS [ 79s] + LDFLAGS= [ 79s] + export LDFLAGS [ 79s] + LD_AS_NEEDED=1 [ 79s] + export LD_AS_NEEDED [ 79s] + make all [ 79s] cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/dracut-install.o install/dracut-install.c [ 79s] install/dracut-install.c: In function 'resolve_deps': [ 79s] install/dracut-install.c:338:17: warning: ignoring return value of 'read', declared with attribute warn_unused_result [-Wunused-result] [ 79s] read(fd, buf, LINE_MAX); [ 79s] ^~~~~~~~~~~~~~~~~~~~~~~ [ 79s] install/dracut-install.c: In function 'cp': [ 79s] install/dracut-install.c:223:33: warning: ignoring return value of 'fchown', declared with attribute warn_unused_result [-Wunused-result] [ 79s] fchown(dest_desc, (__uid_t)-1, sb.st_gid); [ 79s] ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 79s] cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/hashmap.o install/hashmap.c [ 79s] cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/log.o install/log.c [ 79s] cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/util.o install/util.c [ 80s] cc install/dracut-install.o install/hashmap.o install/log.o install/util.o -o install/dracut-install [ 80s] ln -fs install/dracut-install dracut-install [ 80s] asciidoc -d manpage -b docbook -o lsinitrd.1.xml lsinitrd.1.asc [ 80s] xsltproc -o lsinitrd.1 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl lsinitrd.1.xml [ 80s] Note: Writing lsinitrd.1 [ 80s] asciidoc -d manpage -b docbook -o dracut.conf.5.xml dracut.conf.5.asc [ 81s] xsltproc -o dracut.conf.5 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.conf.5.xml [ 81s] Note: Writing dracut.conf.5 [ 81s] asciidoc -d manpage -b docbook -o dracut.cmdline.7.xml dracut.cmdline.7.asc [ 82s] xsltproc -o dracut.cmdline.7 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.cmdline.7.xml [ 83s] Note: Writing dracut.cmdline.7 [ 83s] asciidoc -d manpage -b docbook -o dracut.bootup.7.xml dracut.bootup.7.asc [ 83s] xsltproc -o dracut.bootup.7 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.bootup.7.xml [ 83s] Note: Writing dracut.bootup.7 [ 83s] asciidoc -d manpage -b docbook -o dracut.8.xml dracut.8.asc [ 84s] xsltproc -o dracut.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.8.xml [ 85s] Note: Writing dracut.8 [ 85s] asciidoc -d manpage -b docbook -o dracut-catimages.8.xml dracut-catimages.8.asc [ 85s] xsltproc -o dracut-catimages.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut-catimages.8.xml [ 85s] Note: Writing dracut-catimages.8 [ 85s] asciidoc -d manpage -b docbook -o mkinitrd.8.xml mkinitrd.8.asc [ 86s] xsltproc -o mkinitrd.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl mkinitrd.8.xml [ 86s] Note: Writing mkinitrd.8 [ 86s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-cmdline.service.8.xml modules.d/98systemd/dracut-cmdline.service.8.asc [ 86s] xsltproc -o modules.d/98systemd/dracut-cmdline.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-cmdline.service.8.xml [ 86s] Note: Writing dracut-cmdline.service.8 [ 86s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-initqueue.service.8.xml modules.d/98systemd/dracut-initqueue.service.8.asc [ 87s] xsltproc -o modules.d/98systemd/dracut-initqueue.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-initqueue.service.8.xml [ 87s] Note: Writing dracut-initqueue.service.8 [ 87s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-mount.service.8.xml modules.d/98systemd/dracut-mount.service.8.asc [ 87s] xsltproc -o modules.d/98systemd/dracut-mount.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-mount.service.8.xml [ 87s] Note: Writing dracut-mount.service.8 [ 87s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-shutdown.service.8.xml modules.d/98systemd/dracut-shutdown.service.8.asc [ 88s] xsltproc -o modules.d/98systemd/dracut-shutdown.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-shutdown.service.8.xml [ 88s] Note: Writing dracut-shutdown.service.8 [ 88s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-mount.service.8.xml modules.d/98systemd/dracut-pre-mount.service.8.asc [ 88s] xsltproc -o modules.d/98systemd/dracut-pre-mount.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-mount.service.8.xml [ 89s] Note: Writing dracut-pre-mount.service.8 [ 89s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-pivot.service.8.xml modules.d/98systemd/dracut-pre-pivot.service.8.asc [ 89s] xsltproc -o modules.d/98systemd/dracut-pre-pivot.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-pivot.service.8.xml [ 89s] Note: Writing dracut-pre-pivot.service.8 [ 89s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-trigger.service.8.xml modules.d/98systemd/dracut-pre-trigger.service.8.asc [ 89s] xsltproc -o modules.d/98systemd/dracut-pre-trigger.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-trigger.service.8.xml [ 90s] Note: Writing dracut-pre-trigger.service.8 [ 90s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-udev.service.8.xml modules.d/98systemd/dracut-pre-udev.service.8.asc [ 90s] xsltproc -o modules.d/98systemd/dracut-pre-udev.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-udev.service.8.xml [ 90s] Note: Writing dracut-pre-udev.service.8 [ 90s] asciidoc -a numbered -d book -b docbook -o dracut.xml dracut.asc [ 94s] xsltproc -o dracut.html --xinclude -nonet \ [ 94s] --stringparam html.stylesheet \ [ 94s] http://docs.fedoraproject.org/en-US/Common_Content/css/default.css \ [ 94s] http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl dracut.xml [ 95s] rm -f -- dracut.xml [ 96s] rm modules.d/98systemd/dracut-mount.service.8.xml dracut.8.xml dracut.cmdline.7.xml modules.d/98systemd/dracut-pre-mount.service.8.xml dracut.bootup.7.xml modules.d/98systemd/dracut-initqueue.service.8.xml modules.d/98systemd/dracut-pre-pivot.service.8.xml mkinitrd.8.xml modules.d/98systemd/dracut-cmdline.service.8.xml dracut.conf.5.xml lsinitrd.1.xml modules.d/98systemd/dracut-pre-udev.service.8.xml dracut-catimages.8.xml modules.d/98systemd/dracut-pre-trigger.service.8.xml modules.d/98systemd/dracut-shutdown.service.8.xml [ 96s] + exit 0 [ 96s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.6PCTxx [ 96s] + umask 022 [ 96s] + cd /home/abuild/rpmbuild/BUILD [ 96s] + cd dracut-032 [ 96s] + LANG=C [ 96s] + export LANG [ 96s] + unset DISPLAY [ 96s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386 [ 96s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386 [ 96s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386 libdir=/usr/lib bindir=/usr/bin systemdsystemunitdir=/usr/lib/systemd/system sysconfdir=/etc mandir=/usr/share/man [ 96s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/lib/dracut [ 96s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/bin [ 96s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/etc [ 96s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/lib/dracut/modules.d [ 96s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/share/man/man1 /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/share/man/man5 /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/share/man/man7 /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/share/man/man8 [ 96s] install -m 0755 dracut.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/bin/dracut [ 96s] install -m 0755 dracut-catimages.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/bin/dracut-catimages [ 96s] install -m 0755 mkinitrd-dracut.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/bin/mkinitrd [ 96s] install -m 0755 lsinitrd.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/bin/lsinitrd [ 96s] install -m 0644 dracut.conf /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/etc/dracut.conf [ 96s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/etc/dracut.conf.d [ 96s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/lib/dracut/dracut.conf.d [ 96s] install -m 0755 dracut-functions.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/lib/dracut/dracut-functions.sh [ 96s] install -m 0755 dracut-version.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/lib/dracut/dracut-version.sh [ 96s] ln -fs dracut-functions.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/lib/dracut/dracut-functions [ 96s] install -m 0755 dracut-logger.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/lib/dracut/dracut-logger.sh [ 96s] install -m 0755 dracut-initramfs-restore.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/lib/dracut/dracut-initramfs-restore [ 96s] cp -arx modules.d /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/lib/dracut [ 96s] for i in lsinitrd.1; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/share/man/man1/${i##*/}; done [ 96s] for i in dracut.conf.5; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/share/man/man5/${i##*/}; done [ 96s] for i in dracut.cmdline.7 dracut.bootup.7; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/share/man/man7/${i##*/}; done [ 96s] for i in dracut.8 dracut-catimages.8 mkinitrd.8 modules.d/98systemd/dracut-cmdline.service.8 modules.d/98systemd/dracut-initqueue.service.8 modules.d/98systemd/dracut-mount.service.8 modules.d/98systemd/dracut-shutdown.service.8 modules.d/98systemd/dracut-pre-mount.service.8 modules.d/98systemd/dracut-pre-pivot.service.8 modules.d/98systemd/dracut-pre-trigger.service.8 modules.d/98systemd/dracut-pre-udev.service.8; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/share/man/man8/${i##*/}; done [ 96s] ln -fs dracut.cmdline.7 /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/share/man/man7/dracut.kernel.7 [ 96s] if [ -n "/usr/lib/systemd/system" ]; then \ [ 96s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/lib/systemd/system; \ [ 96s] cd /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386 && ln -sf .//usr/lib/dracut/modules.d/98systemd/dracut-shutdown.service .//usr/lib/systemd/system/dracut-shutdown.service && cd - ; \ [ 96s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/lib/systemd/system/shutdown.target.wants; \ [ 96s] ln -s ../dracut-shutdown.service \ [ 96s] /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/lib/systemd/system/shutdown.target.wants/dracut-shutdown.service; \ [ 96s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/lib/systemd/system/initrd.target.wants; \ [ 96s] for i in \ [ 96s] dracut-cmdline.service \ [ 96s] dracut-initqueue.service \ [ 96s] dracut-mount.service \ [ 96s] dracut-pre-mount.service \ [ 96s] dracut-pre-pivot.service \ [ 96s] dracut-pre-trigger.service \ [ 96s] dracut-pre-udev.service \ [ 96s] ; do \ [ 96s] cd /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386 && ln -sf .//usr/lib/dracut/modules.d/98systemd/$i .//usr/lib/systemd/system && cd -; \ [ 96s] ln -s ../$i \ [ 96s] /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/lib/systemd/system/initrd.target.wants/$i; \ [ 96s] done \ [ 96s] fi [ 96s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 96s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 96s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 96s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 96s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 96s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 96s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 96s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 96s] if [ -f install/dracut-install ]; then \ [ 96s] install -m 0755 install/dracut-install /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/lib/dracut/dracut-install; \ [ 96s] fi [ 96s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/lib/kernel/install.d [ 96s] install -m 0755 50-dracut.install /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/lib/kernel/install.d/50-dracut.install [ 96s] install -m 0755 51-dracut-rescue.install /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/lib/kernel/install.d/51-dracut-rescue.install [ 96s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/share/bash-completion/completions [ 96s] install -m 0644 dracut-bash-completion.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/share/bash-completion/completions/dracut [ 96s] install -m 0644 lsinitrd-bash-completion.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/share/bash-completion/completions/lsinitrd [ 96s] + echo DRACUT_VERSION=032-1.83 [ 96s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386//usr/lib/dracut/modules.d/01fips [ 96s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386//usr/lib/dracut/modules.d/02fips-aesni [ 96s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386//usr/lib/dracut/modules.d/50gensplash [ 96s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386//usr/lib/dracut/modules.d/96securityfs [ 96s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386//usr/lib/dracut/modules.d/97masterkey [ 96s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386//usr/lib/dracut/modules.d/98integrity [ 96s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386//usr/lib/dracut/modules.d/98selinux [ 96s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/boot/dracut [ 96s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/var/lib/dracut/overlay [ 96s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/var/log [ 96s] + touch /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/var/log/dracut.log [ 96s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/com/initramfs [ 96s] + install -m 0644 dracut.conf.d/suse.conf.example /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/etc/dracut.conf.d/01-dist.conf [ 96s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/etc/logrotate.d [ 96s] + install -m 0644 dracut.logrotate /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/etc/logrotate.d/dracut_log [ 96s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/dracut-032 [ 96s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/lib/dracut/dracut-install [ 103s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 103s] cpio: glibc-2.24/csu/init.c: Cannot stat: No such file or directory [ 103s] cpio: glibc-2.24/sysdeps/i386/crti.S: Cannot stat: No such file or directory [ 103s] cpio: glibc-2.24/sysdeps/i386/crtn.S: Cannot stat: No such file or directory [ 103s] cpio: glibc-2.24/sysdeps/i386/start.S: Cannot stat: No such file or directory [ 103s] 195 blocks [ 103s] + /usr/lib/rpm/check-buildroot [ 103s] + /usr/lib/rpm//brp-compress [ 103s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 103s] + /usr/lib/rpm/brp-python-hardlink [ 103s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386 [ 103s] Processing files: dracut-032-1.83.i686 [ 103s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 103s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 103s] [ 103s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.pC9yUz [ 103s] + umask 022 [ 103s] + cd /home/abuild/rpmbuild/BUILD [ 103s] + cd dracut-032 [ 103s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/share/licenses/dracut [ 103s] + export LICENSEDIR [ 103s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/share/licenses/dracut [ 103s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386/usr/share/licenses/dracut [ 103s] + exit 0 [ 104s] Provides: config(dracut) = 032-1.83 dracut = 032-1.83 dracut(x86-32) = 032-1.83 [ 104s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 104s] Requires: /bin/bash /bin/sh libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.2) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libc.so.6(GLIBC_2.8) libgcc_s.so.1 libgcc_s.so.1(GCC_3.0) libgcc_s.so.1(GCC_3.3.1) [ 104s] Conflicts: systemd < 187 [ 104s] Processing files: dracut-debugsource-032-1.83.i686 [ 104s] Provides: dracut-debugsource = 032-1.83 dracut-debugsource(x86-32) = 032-1.83 [ 104s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 104s] Processing files: dracut-network-032-1.83.i686 [ 104s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 104s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 104s] [ 104s] Provides: dracut-network = 032-1.83 dracut-network(x86-32) = 032-1.83 [ 104s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 104s] Requires: /bin/bash /bin/sh [ 104s] Processing files: dracut-caps-032-1.83.i686 [ 104s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 104s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 104s] [ 104s] Provides: dracut-caps = 032-1.83 dracut-caps(x86-32) = 032-1.83 [ 104s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 104s] Requires: /bin/bash [ 104s] Processing files: dracut-tools-032-1.83.i686 [ 104s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 104s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 104s] [ 104s] Provides: dracut-tools = 032-1.83 dracut-tools(x86-32) = 032-1.83 [ 104s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 104s] Requires: /bin/bash [ 104s] Processing files: dracut-debuginfo-032-1.83.i686 [ 104s] Provides: dracut-debuginfo = 032-1.83 dracut-debuginfo(x86-32) = 032-1.83 [ 104s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 104s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386 [ 104s] Wrote: /home/abuild/rpmbuild/SRPMS/dracut-032-1.83.src.rpm [ 104s] Wrote: /home/abuild/rpmbuild/RPMS/i686/dracut-032-1.83.i686.rpm [ 104s] Wrote: /home/abuild/rpmbuild/RPMS/i686/dracut-debugsource-032-1.83.i686.rpm [ 104s] Wrote: /home/abuild/rpmbuild/RPMS/i686/dracut-network-032-1.83.i686.rpm [ 104s] Wrote: /home/abuild/rpmbuild/RPMS/i686/dracut-caps-032-1.83.i686.rpm [ 104s] Wrote: /home/abuild/rpmbuild/RPMS/i686/dracut-tools-032-1.83.i686.rpm [ 104s] Wrote: /home/abuild/rpmbuild/RPMS/i686/dracut-debuginfo-032-1.83.i686.rpm [ 104s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.YDaz8d [ 104s] + umask 022 [ 104s] + cd /home/abuild/rpmbuild/BUILD [ 104s] + cd dracut-032 [ 104s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.83.i386 [ 104s] + exit 0 [ 105s] ... checking for files with abuild user/group [ 105s] Killing qemu-hang-fix PID=1328 [ 105s] ... creating baselibs [ 105s] ... comparing built packages with the former built [ 105s] /usr/lib/build/pkg-diff.sh [ 105s] compare /.build.oldpackages/dracut-032-1.82.src.rpm /home/abuild/rpmbuild/SRPMS/dracut-032-1.83.src.rpm [ 105s] This is not a prerelease project. Compare the project name. [ 105s] comparing rpmtags [ 105s] comparing RELEASE [ 105s] comparing PROVIDES [ 105s] comparing scripts [ 105s] comparing filelist [ 105s] comparing file checksum [ 105s] RPM meta information is identical [ 105s] compare /.build.oldpackages/dracut-032-1.82.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-032-1.83.i686.rpm [ 105s] Comparing dracut-032-1.82.i686.rpm to dracut-032-1.83.i686.rpm [ 105s] This is not a prerelease project. Compare the project name. [ 105s] comparing rpmtags [ 105s] comparing RELEASE [ 105s] comparing PROVIDES [ 105s] comparing scripts [ 105s] comparing filelist [ 105s] comparing file checksum [ 105s] creating rename script [ 105s] RPM file checksum differs. [ 105s] Extracting packages [ 106s] /usr/lib/dracut/dracut-version.sh differs (ASCII text) [ 106s] --- old//usr/lib/dracut/dracut-version.sh 2017-04-13 18:20:31.000000000 +0000 [ 106s] +++ new//usr/lib/dracut/dracut-version.sh 2017-04-14 17:04:36.000000000 +0000 [ 106s] @@ -1 +1 @@ [ 106s] -DRACUT_VERSION=032-1.82 [ 106s] +DRACUT_VERSION=032-1.83 [ 106s] compare /.build.oldpackages/dracut-caps-032-1.82.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-caps-032-1.83.i686.rpm [ 106s] Comparing dracut-caps-032-1.82.i686.rpm to dracut-caps-032-1.83.i686.rpm [ 106s] This is not a prerelease project. Compare the project name. [ 106s] comparing rpmtags [ 106s] comparing RELEASE [ 106s] comparing PROVIDES [ 106s] comparing scripts [ 106s] comparing filelist [ 106s] comparing file checksum [ 106s] creating rename script [ 106s] RPM meta information is identical [ 106s] compare /.build.oldpackages/dracut-debuginfo-032-1.82.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-debuginfo-032-1.83.i686.rpm [ 106s] skipping -debuginfo package [ 106s] compare /.build.oldpackages/dracut-debugsource-032-1.82.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-debugsource-032-1.83.i686.rpm [ 106s] Comparing dracut-debugsource-032-1.82.i686.rpm to dracut-debugsource-032-1.83.i686.rpm [ 106s] This is not a prerelease project. Compare the project name. [ 106s] comparing rpmtags [ 106s] comparing RELEASE [ 106s] comparing PROVIDES [ 106s] comparing scripts [ 106s] comparing filelist [ 106s] comparing file checksum [ 106s] creating rename script [ 106s] RPM meta information is identical [ 106s] compare /.build.oldpackages/dracut-network-032-1.82.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-network-032-1.83.i686.rpm [ 107s] Comparing dracut-network-032-1.82.i686.rpm to dracut-network-032-1.83.i686.rpm [ 107s] This is not a prerelease project. Compare the project name. [ 107s] comparing rpmtags [ 107s] comparing RELEASE [ 107s] comparing PROVIDES [ 107s] comparing scripts [ 107s] comparing filelist [ 107s] comparing file checksum [ 107s] creating rename script [ 107s] RPM meta information is identical [ 107s] compare /.build.oldpackages/dracut-tools-032-1.82.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-tools-032-1.83.i686.rpm [ 107s] Comparing dracut-tools-032-1.82.i686.rpm to dracut-tools-032-1.83.i686.rpm [ 107s] This is not a prerelease project. Compare the project name. [ 107s] comparing rpmtags [ 107s] comparing RELEASE [ 107s] comparing PROVIDES [ 107s] comparing scripts [ 107s] comparing filelist [ 107s] comparing file checksum [ 107s] creating rename script [ 107s] RPM file checksum differs. [ 107s] Extracting packages [ 107s] Package content is identical [ 107s] ... saving built statistics [ 107s] ... saving built packages [ 107s] /home/abuild/rpmbuild/RPMS/i686/dracut-032-1.83.i686.rpm [ 107s] /home/abuild/rpmbuild/RPMS/i686/dracut-caps-032-1.83.i686.rpm [ 107s] /home/abuild/rpmbuild/RPMS/i686/dracut-debuginfo-032-1.83.i686.rpm [ 107s] /home/abuild/rpmbuild/RPMS/i686/dracut-debugsource-032-1.83.i686.rpm [ 107s] /home/abuild/rpmbuild/RPMS/i686/dracut-network-032-1.83.i686.rpm [ 107s] /home/abuild/rpmbuild/RPMS/i686/dracut-tools-032-1.83.i686.rpm [ 107s] /home/abuild/rpmbuild/SRPMS/dracut-032-1.83.src.rpm [ 107s] /home/abuild/rpmbuild/OTHER/_statistics [ 107s] [ 107s] w14 finished "build dracut.spec" at Fri Apr 14 17:04:49 UTC 2017. [ 107s] [ 108s] /.build/build: line 368: 219 Killed background_monitor_process [ 110s] [ 104.349076] SysRq : Power Off [ 110s] [ 104.456418] Power down. [ 111s] build: extracting built packages... [ 111s] dracut-032-1.83.i686.rpm [ 111s] dracut-caps-032-1.83.i686.rpm [ 111s] dracut-debuginfo-032-1.83.i686.rpm [ 111s] dracut-debugsource-032-1.83.i686.rpm [ 111s] dracut-network-032-1.83.i686.rpm [ 111s] dracut-tools-032-1.83.i686.rpm [ 111s] dracut-032-1.83.src.rpm [ 111s] _statistics