[ 0s] Using BUILD_ROOT=/srv/build/root_1/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_1/root [ 0s] [ 0s] [ 0s] w13 started "build dracut.spec" at Sun Mar 16 17:09:44 UTC 2014. [ 0s] [ 0s] Building dracut for project 'Tizen:Mobile' repository 'emulator' arch 'i586' srcmd5 '09be87dc28f60672028e190f739b19e8' [ 0s] [ 0s] processing specfile /srv/build/root_1/.build-srcdir/dracut.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_1/.build-srcdir/dracut.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_1/.build.rpmlist /srv/build/root_1/.build-srcdir/dracut.spec build rpmlint-Factory ... [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/35] preinstalling libmagic-data... [ 0s] [2/35] preinstalling setup... [ 0s] [3/35] preinstalling filesystem... [ 0s] [4/35] preinstalling glibc... [ 1s] [5/35] preinstalling bash... [ 1s] [6/35] preinstalling diffutils... [ 1s] [7/35] preinstalling grep... [ 1s] [8/35] preinstalling libattr... [ 1s] [9/35] preinstalling libbz2... [ 1s] [10/35] preinstalling libcap... [ 1s] [11/35] preinstalling libelf... [ 1s] [12/35] preinstalling libfreebl3... [ 1s] [13/35] preinstalling liblua... [ 1s] [14/35] preinstalling liblzma... [ 1s] [15/35] preinstalling libncurses... [ 1s] [16/35] preinstalling libpopt... [ 1s] [17/35] preinstalling libsmack... [ 1s] [18/35] preinstalling libsqlite... [ 1s] [19/35] preinstalling nspr... [ 1s] [20/35] preinstalling sed... [ 1s] [21/35] preinstalling tar... [ 1s] [22/35] preinstalling zlib... [ 1s] [23/35] preinstalling libacl... [ 1s] [24/35] preinstalling libgcc_s1... [ 1s] [25/35] preinstalling libreadline... [ 1s] [26/35] preinstalling smack... [ 1s] [27/35] preinstalling bzip2... [ 1s] [28/35] preinstalling libmagic... [ 1s] [29/35] preinstalling libxml2... [ 1s] [30/35] preinstalling util-linux... [ 1s] [31/35] preinstalling coreutils... [ 1s] [32/35] preinstalling nss... [ 1s] [33/35] preinstalling libsoftokn3... [ 2s] [34/35] preinstalling rpm... [ 2s] [35/35] preinstalling rpm-security-plugin... [ 2s] [ 2s] [1/8] preinstalling libext2fs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling perl... [ 2s] [5/8] preinstalling grep... [ 2s] [6/8] preinstalling libblkid... [ 2s] [7/8] preinstalling libmount... [ 3s] [8/8] preinstalling util-linux... [ 3s] copying packages... [ 3s] reordering...cycle: coreutils -> pam [ 3s] breaking dependency pam -> coreutils [ 3s] cycle: nss -> libsoftokn3 [ 3s] breaking dependency nss -> libsoftokn3 [ 3s] done [ 5s] booting kvm ... [ 5s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 8192 -drive file=/srv/build/root_1/root,if=virtio,cache=none -drive file=/srv/build/root_1/root,if=ide,index=0,cache=none -drive file=/srv/build/root_1/swap,if=virtio,cache=none -smp 4 [ 14s] doing fast boot [ 14s] Creating device nodes with udev [ 21s] Waiting for device /dev/vda to appear: ok [ 21s] fsck from util-linux 2.21.2 [ 21s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 21s] /dev/vda: clean, 5118/2097152 files, 169660/8388608 blocks [ 21s] fsck succeeded. Mounting root device read-write. [ 21s] Mounting root /dev/vda [ 21s] mount -o rw -t ext4 /dev/vda /root [ 22s] replacing /etc/mtab with symlink to /proc/self/mounts [ 22s] 2nd stage started in virtual machine [ 22s] machine type: x86_64 [ 22s] switching personality to 8... [ 22s] 2nd stage started in virtual machine [ 22s] machine type: i686 [ 22s] swapon /dev/vdb [ 23s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 23s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 23s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 23s] mount: none is already mounted or /proc busy [ 23s] mount: none is already mounted or /dev/pts busy [ 23s] logging output to //.build.log... [ 23s] processing specfile /.build-srcdir/dracut.spec ... [ 23s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/dracut.spec build rpmlint-Factory ... [ 23s] running setup postinstall script [ 23s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 23s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 23s] initializing rpm db... [ 23s] [1/120] installing libmagic-data-5.11-3.1 [ 23s] [2/120] installing setup-0.9-5.7 [ 23s] [3/120] installing terminfo-base-5.9-4.1 [ 23s] [4/120] installing filesystem-3.1-5.1 [ 23s] error: Failed to set SMACK64 _ for /proc: Operation not supported [ 23s] [5/120] installing glibc-2.18-3.37 [ 23s] [6/120] installing bash-4.2-2.25 [ 24s] [7/120] installing cpio-2.11-4.22 [ 24s] [8/120] installing diffutils-3.3-1.1 [ 24s] [9/120] installing findutils-4.5.10-2.41 [ 24s] [10/120] installing gawk-4.0.1-2.23 [ 24s] [11/120] installing hostname-3.12-3.25 [ 24s] [12/120] installing libattr-2.4.46-2.40 [ 24s] [13/120] installing libbz2-1.0.6-2.56 [ 24s] [14/120] installing libcap-2.24-1.12 [ 24s] [15/120] installing libcares-1.7.5-2.27 [ 24s] [16/120] installing libelf-0.155-2.31 [ 24s] [17/120] installing libexpat-2.1.0-2.25 [ 24s] [18/120] installing libext2fs-1.42.6-2.26 [ 24s] [19/120] installing libfreebl3-3.15.4-1.18 [ 24s] [20/120] installing libgdbm-1.10-2.75 [ 24s] [21/120] installing libgmp-5.1.3-3.1 [ 24s] [22/120] installing libgpg-error-1.10-2.26 [ 24s] [23/120] installing libltdl-2.4.2-2.25 [ 24s] [24/120] installing liblua-5.1.4-3.41 [ 24s] [25/120] installing liblzma-5.0.3-2.73 [ 24s] [26/120] installing libpcre-8.31-2.25 [ 24s] [27/120] installing libpopt-1.16-2.37 [ 24s] [28/120] installing libpython-2.7.3-2.22 [ 24s] [29/120] installing libsmack-1.0.1-3.3 [ 24s] [30/120] installing libsqlite-3.7.14-2.31 [ 24s] [31/120] installing libuuid-2.24-1.8 [ 25s] [32/120] installing m4-1.4.16-2.24 [ 25s] [33/120] installing net-tools-2.0_20121208git-2.37 [ 25s] [34/120] installing nspr-4.10.2-1.11 [ 25s] [35/120] installing patch-2.7-2.37 [ 25s] [36/120] installing pkg-config-0.28-2.41 [ 25s] [37/120] installing sed-4.2.1-2.25 [ 25s] [38/120] installing tar-1.27-1.1 [ 25s] [39/120] installing update-alternatives-1.16.3-2.25 [ 25s] [40/120] installing which-2.20-5.24 [ 25s] [41/120] installing zlib-1.2.7-2.38 [ 25s] [42/120] installing libncurses-5.9-4.1 [ 25s] [43/120] installing build-compare-2012.01.26-2.38 [ 25s] [44/120] installing dash-0.5.7-5.24 [ 25s] [45/120] installing grep-2.16-1.1 [ 25s] [46/120] installing less-458-1.1 [ 25s] [47/120] installing libacl-2.2.51-3.40 [ 25s] [48/120] installing libasm-0.155-2.31 [ 25s] [49/120] installing libatomic-4.8.2-1.23 [ 25s] [50/120] installing libblkid-2.24-1.8 [ 25s] [51/120] installing libgcc_s1-4.8.2-1.23 [ 25s] [52/120] installing libgcrypt-1.5.0-2.25 [ 25s] [53/120] installing libgomp-4.8.2-1.23 [ 25s] [54/120] installing libidn-1.25-2.25 [ 25s] [55/120] installing libmpfr-3.1.1-2.53 [ 26s] [56/120] installing libopenssl-1.0.1f-1.10 [ 26s] [57/120] installing libreadline-5.2-4.39 [ 26s] [58/120] installing make-3.82-2.39 [ 26s] [59/120] installing nss-certs-3.15.4-1.18 [ 26s] [60/120] installing smack-1.0.1-3.3 [ 26s] [61/120] installing bzip2-1.0.6-2.56 [ 26s] [62/120] installing libmagic-5.11-3.1 [ 26s] [63/120] installing libxml2-2.8.0-3.1 [ 26s] [64/120] installing xz-5.0.3-2.73 [ 26s] [65/120] installing binutils-2.23.1-3.4 [ 28s] update-alternatives: using /usr/bin/ld.bfd to provide /usr/bin/ld (ld) in auto mode. [ 28s] [66/120] installing libdw-0.155-2.31 [ 29s] [67/120] installing file-5.11-3.1 [ 29s] [68/120] installing libitm-4.8.2-1.23 [ 30s] [69/120] installing libmount-2.24-1.8 [ 30s] [70/120] installing libmpc-1.0-2.60 [ 31s] [71/120] installing libstdc++-4.8.2-1.23 [ 31s] [72/120] installing libxml2-tools-2.8.0-3.1 [ 31s] [73/120] installing rsync-3.0.8-2.27 [ 32s] [74/120] installing libcurl-7.32.0-2.12 [ 33s] [75/120] installing libxslt-1.1.26-2.26 [ 34s] [76/120] installing db4-4.8.30.NC-3.1 [ 37s] [77/120] installing libxslt-tools-1.1.26-2.26 [ 37s] [78/120] installing libasan-4.8.2-1.23 [ 38s] [79/120] installing cpp48-4.8.2-1.23 [ 41s] [80/120] installing elfutils-0.155-2.31 [ 41s] [81/120] installing cpp-4.8-2.47 [ 41s] [82/120] installing perl-5.16.3-2.51 [ 91s] [83/120] installing python-2.7.3-2.22 [ 95s] [84/120] installing build-mkbaselibs-20120927-3.1 [ 96s] [85/120] installing perl-Error-0.17017-8.27 [ 96s] [86/120] installing autoconf-2.69-2.58 [ 97s] [87/120] installing python-xml-2.7.3-2.22 [ 97s] [88/120] installing build-20120927-3.1 [ 98s] [89/120] installing pam-1.1.6-4.1 [ 100s] [90/120] installing nss-3.15.4-1.18 [ 100s] [91/120] installing pam-modules-extra-1.1.6-4.1 [ 100s] [92/120] installing pwdutils-3.2.19-2.10 [ 100s] [93/120] installing libsoftokn3-3.15.4-1.18 [ 101s] [94/120] installing coreutils-8.21-2.27 [ 103s] [95/120] installing util-linux-2.24-1.8 [ 103s] [96/120] installing rpm-4.11.0.1-8.1 [ 108s] [97/120] installing linux-glibc-devel-3.10-2.72 [ 110s] [98/120] installing gzip-1.6-1.1 [ 110s] [99/120] installing automake-1.12.1-3.1 [ 111s] [100/120] installing sgml-skel-0.6-2.26 [ 111s] [101/120] installing tzdata-2012e-2.23 [ 114s] [102/120] installing openssh-6.2p2-3.1 [ 115s] [103/120] installing rpmlint-mini-1.4-2.23 [ 116s] [104/120] installing rpm-security-plugin-4.11.0.1-8.1 [ 116s] warning: /etc/device-sec-policy created as /etc/device-sec-policy.rpmnew [ 117s] [105/120] installing rpmlint-tizen-1.0-2.24 [ 117s] [106/120] installing iso_ent-2000.11.03-3.26 [ 117s] [107/120] installing glibc-devel-2.18-3.37 [ 118s] [108/120] installing libtool-2.4.2-2.25 [ 119s] [109/120] installing xmlcharent-0.3-406.27 [ 119s] [110/120] installing git-core-1.8.1.3-1.22 [ 121s] [111/120] installing git-1.8.1.3-1.22 [ 121s] [112/120] installing libstdc++48-devel-4.8.2-1.23 [ 124s] [113/120] installing docbook_4-4.5-2.26 [ 126s] [114/120] installing gcc48-4.8.2-1.23 [ 127s] [115/120] installing gcc-4.8-2.47 [ 127s] [116/120] installing docbook-xsl-stylesheets-1.77.1-2.38 [ 129s] [117/120] installing gcc48-c++-4.8.2-1.23 [ 131s] [118/120] installing gcc-c++-4.8-2.47 [ 131s] [119/120] installing asciidoc-8.6.6-2.25 [ 132s] [120/120] installing rpm-build-4.11.0.1-8.1 [ 133s] removing nis flags from //etc/nsswitch.conf... [ 133s] now finalizing build dir... [ 134s] build target is i686-tizen-linux [ 134s] ----------------------------------------------------------------- [ 134s] I have the following modifications for dracut.spec: [ 134s] 8c8 [ 134s] < Release: 0 [ 134s] --- [ 134s] > Release: 1.25 [ 134s] 232a233 [ 134s] > %changelog [ 134s] ----------------------------------------------------------------- [ 134s] ----- building dracut.spec (user abuild) [ 134s] ----------------------------------------------------------------- [ 134s] ----------------------------------------------------------------- [ 134s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=i686-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Mobile/emulator/09be87dc28f60672028e190f739b19e8-dracut' /home/abuild/rpmbuild/SOURCES/dracut.spec [ 134s] Building target platforms: i686-tizen-linux [ 134s] Building for target i686-tizen-linux [ 134s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.4E5Qi3 [ 134s] + umask 022 [ 134s] + cd /home/abuild/rpmbuild/BUILD [ 134s] + cd /home/abuild/rpmbuild/BUILD [ 134s] + rm -rf dracut-025 [ 134s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/dracut-025.tar.xz [ 134s] + /bin/tar -xf - [ 134s] + STATUS=0 [ 134s] + '[' 0 -ne 0 ']' [ 134s] + cd dracut-025 [ 134s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 134s] + echo 'Patch #0 (0001-We-do-not-ship-pidof.patch):' [ 134s] Patch #0 (0001-We-do-not-ship-pidof.patch): [ 134s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0001-We-do-not-ship-pidof.patch [ 134s] + /bin/patch -p1 --fuzz=2 [ 134s] patching file modules.d/99base/module-setup.sh [ 134s] + cp /home/abuild/rpmbuild/SOURCES/dracut.manifest . [ 134s] + exit 0 [ 134s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.yOupWI [ 134s] + umask 022 [ 134s] + cd /home/abuild/rpmbuild/BUILD [ 134s] + cd dracut-025 [ 134s] + LANG=C [ 134s] + export LANG [ 134s] + unset DISPLAY [ 134s] + CFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' [ 134s] + export CFLAGS [ 134s] + CXXFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' [ 134s] + export CXXFLAGS [ 134s] + FFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -I%_fmoddir' [ 134s] + export FFLAGS [ 134s] + LD_AS_NEEDED=1 [ 134s] + export LD_AS_NEEDED [ 134s] + make all [ 134s] cc -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -std=gnu99 -c -o install/dracut-install.o install/dracut-install.c [ 134s] install/dracut-install.c: In function 'resolve_deps': [ 134s] install/dracut-install.c:259:21: warning: ignoring return value of 'read', declared with attribute warn_unused_result [-Wunused-result] [ 134s] read(fd, buf, LINE_MAX); [ 134s] ^ [ 134s] install/dracut-install.c:277:17: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result] [ 134s] asprintf(&cmd, "ldd %s 2>&1", src); [ 134s] ^ [ 134s] install/dracut-install.c: In function 'dracut_install': [ 134s] install/dracut-install.c:404:17: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result] [ 134s] asprintf(&fulldstpath, "%s%s", destrootdir, dst); [ 134s] ^ [ 134s] install/dracut-install.c:486:33: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result] [ 134s] asprintf(&absdestpath, "%s%s", destrootdir, abspath); [ 134s] ^ [ 134s] install/dracut-install.c: In function 'convert_abs_rel': [ 134s] install/dracut-install.c:100:17: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result] [ 134s] asprintf(&realtarget, "%s/%s", q, &p[i]); [ 134s] ^ [ 134s] install/dracut-install.c: In function 'hmac_install': [ 134s] install/dracut-install.c:346:25: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result] [ 134s] asprintf(&srchmacname, "%s/%s.hmac", hmacpath, &src[dlen + 1]); [ 134s] ^ [ 134s] install/dracut-install.c:347:25: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result] [ 134s] asprintf(&dsthmacname, "%s/%s.hmac", hmacpath, &src[dlen + 1]); [ 134s] ^ [ 134s] install/dracut-install.c:349:25: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result] [ 134s] asprintf(&srchmacname, "%s/.%s.hmac", srcpath, &src[dlen + 1]); [ 134s] ^ [ 134s] install/dracut-install.c:350:25: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result] [ 134s] asprintf(&dsthmacname, "%s/.%s.hmac", dstpath, &src[dlen + 1]); [ 134s] ^ [ 134s] install/dracut-install.c: In function 'cp': [ 134s] install/dracut-install.c:218:39: warning: ignoring return value of 'fchown', declared with attribute warn_unused_result [-Wunused-result] [ 134s] fchown(dest_desc, -1, sb.st_gid); [ 134s] ^ [ 134s] install/dracut-install.c: In function 'find_binary': [ 134s] install/dracut-install.c:698:25: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result] [ 134s] asprintf(&newsrc, "%s/%s", p, src); [ 134s] ^ [ 135s] cc -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -std=gnu99 -c -o install/hashmap.o install/hashmap.c [ 135s] cc -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -std=gnu99 -c -o install/log.o install/log.c [ 135s] cc -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -std=gnu99 -c -o install/util.o install/util.c [ 135s] cc install/dracut-install.o install/hashmap.o install/log.o install/util.o -o install/dracut-install [ 135s] ln -fs install/dracut-install dracut-install [ 135s] asciidoc -d manpage -b docbook -o lsinitrd.1.xml lsinitrd.1.asc [ 135s] xsltproc -o lsinitrd.1 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl lsinitrd.1.xml [ 136s] Note: Writing lsinitrd.1 [ 136s] asciidoc -d manpage -b docbook -o dracut.conf.5.xml dracut.conf.5.asc [ 136s] xsltproc -o dracut.conf.5 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.conf.5.xml [ 136s] Note: Writing dracut.conf.5 [ 136s] asciidoc -d manpage -b docbook -o dracut.cmdline.7.xml dracut.cmdline.7.asc [ 138s] xsltproc -o dracut.cmdline.7 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.cmdline.7.xml [ 138s] Note: Writing dracut.cmdline.7 [ 138s] asciidoc -d manpage -b docbook -o dracut.8.xml dracut.8.asc [ 139s] xsltproc -o dracut.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.8.xml [ 139s] Note: Writing dracut.8 [ 139s] asciidoc -d manpage -b docbook -o dracut-catimages.8.xml dracut-catimages.8.asc [ 140s] xsltproc -o dracut-catimages.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut-catimages.8.xml [ 140s] Note: Writing dracut-catimages.8 [ 140s] asciidoc -d manpage -b docbook -o mkinitrd.8.xml mkinitrd.8.asc [ 140s] xsltproc -o mkinitrd.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl mkinitrd.8.xml [ 140s] Note: Writing mkinitrd.8 [ 140s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-cmdline.service.8.xml modules.d/98systemd/dracut-cmdline.service.8.asc [ 141s] xsltproc -o modules.d/98systemd/dracut-cmdline.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-cmdline.service.8.xml [ 141s] Note: Writing dracut-cmdline.service.8 [ 141s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-initqueue.service.8.xml modules.d/98systemd/dracut-initqueue.service.8.asc [ 141s] xsltproc -o modules.d/98systemd/dracut-initqueue.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-initqueue.service.8.xml [ 141s] Note: Writing dracut-initqueue.service.8 [ 141s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-pivot.service.8.xml modules.d/98systemd/dracut-pre-pivot.service.8.asc [ 142s] xsltproc -o modules.d/98systemd/dracut-pre-pivot.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-pivot.service.8.xml [ 142s] Note: Writing dracut-pre-pivot.service.8 [ 142s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-trigger.service.8.xml modules.d/98systemd/dracut-pre-trigger.service.8.asc [ 142s] xsltproc -o modules.d/98systemd/dracut-pre-trigger.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-trigger.service.8.xml [ 142s] Note: Writing dracut-pre-trigger.service.8 [ 142s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-udev.service.8.xml modules.d/98systemd/dracut-pre-udev.service.8.asc [ 143s] xsltproc -o modules.d/98systemd/dracut-pre-udev.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-udev.service.8.xml [ 143s] Note: Writing dracut-pre-udev.service.8 [ 143s] asciidoc -d manpage -b docbook -o modules.d/98systemd/initrd-switch-root.service.8.xml modules.d/98systemd/initrd-switch-root.service.8.asc [ 143s] xsltproc -o modules.d/98systemd/initrd-switch-root.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/initrd-switch-root.service.8.xml [ 143s] Note: Writing initrd-switch-root.service.8 [ 144s] asciidoc -d manpage -b docbook -o modules.d/98systemd/udevadm-cleanup-db.service.8.xml modules.d/98systemd/udevadm-cleanup-db.service.8.asc [ 144s] xsltproc -o modules.d/98systemd/udevadm-cleanup-db.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/udevadm-cleanup-db.service.8.xml [ 144s] Note: Writing udevadm-cleanup-db.service.8 [ 144s] asciidoc -a numbered -d book -b docbook -o dracut.xml dracut.asc [ 148s] xsltproc -o dracut.html --xinclude -nonet \ [ 148s] --stringparam html.stylesheet \ [ 148s] http://docs.fedoraproject.org/en-US/Common_Content/css/default.css \ [ 148s] http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl dracut.xml [ 148s] rm dracut.xml [ 148s] rm dracut.8.xml dracut.cmdline.7.xml modules.d/98systemd/udevadm-cleanup-db.service.8.xml modules.d/98systemd/dracut-initqueue.service.8.xml modules.d/98systemd/dracut-pre-pivot.service.8.xml mkinitrd.8.xml modules.d/98systemd/dracut-cmdline.service.8.xml dracut.conf.5.xml modules.d/98systemd/dracut-pre-udev.service.8.xml modules.d/98systemd/initrd-switch-root.service.8.xml dracut-catimages.8.xml modules.d/98systemd/dracut-pre-trigger.service.8.xml lsinitrd.1.xml [ 148s] + exit 0 [ 148s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.x6CYqg [ 148s] + umask 022 [ 148s] + cd /home/abuild/rpmbuild/BUILD [ 148s] + cd dracut-025 [ 148s] + LANG=C [ 148s] + export LANG [ 148s] + unset DISPLAY [ 148s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386 [ 148s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386 [ 148s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386 libdir=/usr/lib bindir=/usr/bin systemdsystemunitdir=/usr/lib/systemd/system sysconfdir=/etc mandir=/usr/share/man [ 148s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/usr/lib/dracut [ 148s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/usr/bin [ 148s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/etc [ 148s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/usr/lib/dracut/modules.d [ 148s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/usr/share/man/man1 /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/usr/share/man/man5 /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/usr/share/man/man7 /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/usr/share/man/man8 [ 148s] install -m 0755 dracut.sh /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/usr/bin/dracut [ 148s] install -m 0755 dracut-catimages.sh /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/usr/bin/dracut-catimages [ 148s] install -m 0755 mkinitrd-dracut.sh /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/usr/bin/mkinitrd [ 148s] install -m 0755 lsinitrd.sh /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/usr/bin/lsinitrd [ 148s] install -m 0644 dracut.conf /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/etc/dracut.conf [ 148s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/etc/dracut.conf.d [ 148s] install -m 0755 dracut-functions.sh /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/usr/lib/dracut/dracut-functions.sh [ 148s] install -m 0755 dracut-version.sh /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/usr/lib/dracut/dracut-version.sh [ 148s] ln -fs dracut-functions.sh /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/usr/lib/dracut/dracut-functions [ 148s] install -m 0755 dracut-logger.sh /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/usr/lib/dracut/dracut-logger.sh [ 148s] install -m 0755 dracut-initramfs-restore.sh /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/usr/lib/dracut/dracut-initramfs-restore [ 148s] cp -arx modules.d /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/usr/lib/dracut [ 148s] for i in lsinitrd.1; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/usr/share/man/man1/${i##*/}; done [ 148s] for i in dracut.conf.5; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/usr/share/man/man5/${i##*/}; done [ 148s] for i in dracut.cmdline.7; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/usr/share/man/man7/${i##*/}; done [ 148s] for i in dracut.8 dracut-catimages.8 mkinitrd.8 modules.d/98systemd/dracut-cmdline.service.8 modules.d/98systemd/dracut-initqueue.service.8 modules.d/98systemd/dracut-pre-pivot.service.8 modules.d/98systemd/dracut-pre-trigger.service.8 modules.d/98systemd/dracut-pre-udev.service.8 modules.d/98systemd/initrd-switch-root.service.8 modules.d/98systemd/udevadm-cleanup-db.service.8; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/usr/share/man/man8/${i##*/}; done [ 148s] ln -fs dracut.cmdline.7 /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/usr/share/man/man7/dracut.kernel.7 [ 148s] if [ -n "/usr/lib/systemd/system" ]; then \ [ 148s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/usr/lib/systemd/system; \ [ 148s] install -m 0644 dracut-shutdown.service /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/usr/lib/systemd/system; \ [ 148s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/usr/lib/systemd/system/shutdown.target.wants; \ [ 148s] ln -s ../dracut-shutdown.service \ [ 148s] /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/usr/lib/systemd/system/shutdown.target.wants/dracut-shutdown.service; \ [ 148s] fi [ 148s] if [ -f install/dracut-install ]; then \ [ 148s] install -m 0755 install/dracut-install /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/usr/lib/dracut/dracut-install; \ [ 148s] fi [ 148s] + echo DRACUT_VERSION=025-1.25 [ 148s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386//usr/lib/dracut/modules.d/01fips [ 148s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386//usr/lib/dracut/modules.d/02fips-aesni [ 148s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386//usr/lib/dracut/modules.d/50gensplash [ 148s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386//usr/lib/dracut/modules.d/96securityfs [ 148s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386//usr/lib/dracut/modules.d/97masterkey [ 148s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386//usr/lib/dracut/modules.d/98integrity [ 148s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386//usr/lib/dracut/modules.d/98selinux [ 148s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/boot/dracut [ 148s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/var/lib/dracut/overlay [ 148s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/var/log [ 148s] + touch /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/var/log/dracut.log [ 148s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/usr/com/initramfs [ 148s] + install -m 0644 dracut.conf.d/suse.conf.example /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/etc/dracut.conf.d/01-dist.conf [ 148s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/etc/logrotate.d [ 148s] + install -m 0644 dracut.logrotate /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/etc/logrotate.d/dracut_log [ 148s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/dracut-025 [ 148s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/usr/lib/dracut/dracut-install [ 149s] cpio: glibc-2.18/csu: Cannot stat: No such file or directory [ 149s] cpio: glibc-2.18/csu/elf-init.c: Cannot stat: No such file or directory [ 149s] cpio: glibc-2.18/csu/init.c: Cannot stat: No such file or directory [ 149s] cpio: glibc-2.18/sysdeps/i386/crti.S: Cannot stat: No such file or directory [ 149s] cpio: glibc-2.18/sysdeps/i386/crtn.S: Cannot stat: No such file or directory [ 149s] cpio: glibc-2.18/sysdeps/i386/start.S: Cannot stat: No such file or directory [ 149s] 171 blocks [ 149s] + /usr/lib/rpm/brp-compress [ 149s] + /usr/lib/rpm/brp-tizen [ 149s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386 [ 149s] Processing files: dracut-025-1.25.i686 [ 149s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 149s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 149s] [ 149s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.oCYV1P [ 149s] + umask 022 [ 149s] + cd /home/abuild/rpmbuild/BUILD [ 149s] + cd dracut-025 [ 149s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/usr/share/licenses/dracut [ 149s] + export LICENSEDIR [ 149s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/usr/share/licenses/dracut [ 149s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386/usr/share/licenses/dracut [ 149s] + exit 0 [ 149s] Provides: config(dracut) = 025-1.25 dracut = 025-1.25 dracut(x86-32) = 025-1.25 [ 149s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 149s] Requires: /bin/bash /bin/sh libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libc.so.6(GLIBC_2.8) [ 149s] Conflicts: systemd < 187 [ 149s] Processing files: dracut-debugsource-025-1.25.i686 [ 149s] Provides: dracut-debugsource = 025-1.25 dracut-debugsource(x86-32) = 025-1.25 [ 149s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 149s] Processing files: dracut-network-025-1.25.i686 [ 149s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 149s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 149s] [ 149s] Provides: dracut-network = 025-1.25 dracut-network(x86-32) = 025-1.25 [ 149s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 149s] Requires: /bin/bash /bin/sh [ 149s] Processing files: dracut-caps-025-1.25.i686 [ 149s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 149s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 149s] [ 149s] Provides: dracut-caps = 025-1.25 dracut-caps(x86-32) = 025-1.25 [ 149s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 149s] Requires: /bin/bash [ 149s] Processing files: dracut-tools-025-1.25.i686 [ 149s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 149s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 149s] [ 149s] Provides: dracut-tools = 025-1.25 dracut-tools(x86-32) = 025-1.25 [ 149s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 149s] Requires: /bin/bash [ 149s] Processing files: dracut-debuginfo-025-1.25.i686 [ 149s] Provides: debuginfo(build-id) = 89944e379723bd444315b5fa91b46e10be6b6f7e [ 149s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 149s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386 [ 149s] Wrote: /home/abuild/rpmbuild/SRPMS/dracut-025-1.25.src.rpm [ 149s] Wrote: /home/abuild/rpmbuild/RPMS/i686/dracut-025-1.25.i686.rpm [ 149s] Wrote: /home/abuild/rpmbuild/RPMS/i686/dracut-debugsource-025-1.25.i686.rpm [ 150s] Wrote: /home/abuild/rpmbuild/RPMS/i686/dracut-network-025-1.25.i686.rpm [ 150s] Wrote: /home/abuild/rpmbuild/RPMS/i686/dracut-caps-025-1.25.i686.rpm [ 150s] Wrote: /home/abuild/rpmbuild/RPMS/i686/dracut-tools-025-1.25.i686.rpm [ 150s] Wrote: /home/abuild/rpmbuild/RPMS/i686/dracut-debuginfo-025-1.25.i686.rpm [ 150s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.Eq6BNL [ 150s] + umask 022 [ 150s] + cd /home/abuild/rpmbuild/BUILD [ 150s] + cd dracut-025 [ 150s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.25.i386 [ 150s] + exit 0 [ 150s] ... checking for files with abuild user/group [ 150s] [ 150s] RPMLINT report: [ 150s] =============== [ 151s] dracut.i686: W: tizen-filelist-forbidden-fhs23 /usr/com is not allowed in FHS 2.3 [ 151s] see http://www.pathname.com/fhs/ to find a better location [ 151s] [ 151s] dracut.i686: W: script-without-shebang /usr/lib/dracut/dracut-version.sh [ 151s] This text file has executable bits set or is located in a path dedicated for [ 151s] executables, but lacks a shebang and cannot thus be executed. If the file is [ 151s] meant to be an executable script, add the shebang, otherwise remove the [ 151s] executable bits or move the file elsewhere. [ 151s] [ 151s] dracut-network.i686: W: non-executable-script /usr/lib/dracut/modules.d/40network/net-lib.sh 0644L /bin/sh [ 151s] dracut-network.i686: W: non-executable-script /usr/lib/dracut/modules.d/40network/parse-vlan.sh 0644L /bin/sh [ 151s] dracut.i686: W: non-executable-script /usr/lib/dracut/modules.d/98pollcdrom/pollcdrom.sh 0644L /bin/sh [ 151s] dracut.i686: W: non-executable-script /usr/lib/dracut/modules.d/91crypt-loop/crypt-loop-lib.sh 0644L /bin/sh [ 151s] dracut.i686: W: non-executable-script /usr/lib/dracut/modules.d/50drm/module-setup.sh 0644L /bin/bash [ 151s] dracut.i686: W: non-executable-script /usr/lib/dracut/modules.d/99base/wait-host-devs.sh 0644L /bin/sh [ 151s] dracut.i686: W: non-executable-script /usr/lib/dracut/modules.d/95udev-rules/udev-rules-prepare.sh 0644L /bin/sh [ 151s] This text file contains a shebang or is located in a path dedicated for [ 151s] executables, but lacks the executable bits and cannot thus be executed. If [ 151s] the file is meant to be an executable script, add the executable bits, [ 151s] otherwise remove the shebang or move the file elsewhere. [ 151s] [ 151s] dracut.i686: W: missing-dependency-to-logrotate for logrotate script /etc/logrotate.d/dracut_log [ 151s] This package installs a file in /etc/logrotate.d/ but doesn't require [ 151s] logrotate to be installed. Because logrotate is not part of the essential [ 151s] packages, your package should explicitely depend on logrotate to make sure [ 151s] that your logrotate job is executed. If it is an optional feature of your [ 151s] package, recommend or suggest logrotate. [ 151s] [ 151s] dracut.i686: W: incoherent-logrotate-file /etc/logrotate.d/dracut_log [ 151s] Your logrotate file should be named /etc/logrotate.d/. [ 151s] [ 151s] dracut.i686: W: ghost-files-without-postin [ 151s] dracut-caps.i686: W: explicit-lib-dependency libcap [ 151s] You must let rpm find the library dependencies by itself. Do not put unneeded [ 151s] explicit Requires: tags. [ 151s] [ 151s] 5 packages and 0 specfiles checked; 0 errors, 13 warnings. [ 151s] [ 151s] ... creating baselibs [ 151s] ... comparing built packages with the former built [ 151s] /usr/lib/build/rpm-check.sh [ 151s] compare /.build.oldpackages/dracut-025-1.24.src.rpm /home/abuild/rpmbuild/SRPMS/dracut-025-1.25.src.rpm [ 153s] compare /.build.oldpackages/dracut-025-1.24.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-025-1.25.i686.rpm [ 153s] /usr/lib/dracut/dracut-version.sh differs ( ASCII text) [ 153s] --- old//usr/lib/dracut/dracut-version.sh 2014-03-11 01:28:26.000000000 +0000 [ 153s] +++ new//usr/lib/dracut/dracut-version.sh 2014-03-16 17:12:12.000000000 +0000 [ 153s] @@ -1 +1 @@ [ 153s] -DRACUT_VERSION=025-1.24 [ 153s] +DRACUT_VERSION=025-1.25 [ 153s] compare /.build.oldpackages/dracut-caps-025-1.24.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-caps-025-1.25.i686.rpm [ 153s] compare /.build.oldpackages/dracut-debuginfo-025-1.24.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-debuginfo-025-1.25.i686.rpm [ 153s] compare /.build.oldpackages/dracut-debugsource-025-1.24.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-debugsource-025-1.25.i686.rpm [ 154s] compare /.build.oldpackages/dracut-network-025-1.24.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-network-025-1.25.i686.rpm [ 154s] compare /.build.oldpackages/dracut-tools-025-1.24.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-tools-025-1.25.i686.rpm [ 154s] comparing /.build.oldpackages/rpmlint.log and /home/abuild/rpmbuild/OTHER/rpmlint.log [ 154s] ... saving built statistics [ 154s] ... saving built packages [ 154s] /home/abuild/rpmbuild/RPMS/i686/dracut-025-1.25.i686.rpm [ 154s] /home/abuild/rpmbuild/RPMS/i686/dracut-caps-025-1.25.i686.rpm [ 154s] /home/abuild/rpmbuild/RPMS/i686/dracut-debuginfo-025-1.25.i686.rpm [ 154s] /home/abuild/rpmbuild/RPMS/i686/dracut-debugsource-025-1.25.i686.rpm [ 154s] /home/abuild/rpmbuild/RPMS/i686/dracut-network-025-1.25.i686.rpm [ 154s] /home/abuild/rpmbuild/RPMS/i686/dracut-tools-025-1.25.i686.rpm [ 154s] /home/abuild/rpmbuild/SRPMS/dracut-025-1.25.src.rpm [ 154s] /home/abuild/rpmbuild/OTHER/_statistics [ 154s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 154s] [ 154s] w13 finished "build dracut.spec" at Sun Mar 16 17:12:18 UTC 2014. [ 154s] [ 157s] [ 143.664875] SysRq : Power Off [ 158s] [ 143.772318] Power down. [ 158s] build: extracting built packages... [ 158s] dracut-025-1.25.i686.rpm [ 158s] dracut-caps-025-1.25.i686.rpm [ 158s] dracut-debuginfo-025-1.25.i686.rpm [ 158s] dracut-debugsource-025-1.25.i686.rpm [ 158s] dracut-network-025-1.25.i686.rpm [ 158s] dracut-tools-025-1.25.i686.rpm [ 158s] dracut-025-1.25.src.rpm [ 158s] _statistics [ 158s] rpmlint.log